Commit Graph

15794 Commits

Author SHA1 Message Date
Linus Torvalds
d0ff934881 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS fixes from Al Viro:
 "Several fixes + obvious cleanup (you've missed a couple of open-coded
  can_lookup() back then)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  snd_pcm_link(): fix a leak...
  use can_lookup() instead of direct checks of ->i_op->lookup
  move exit_task_namespaces() outside of exit_notify()
  fput: task_work_add() can fail if the caller has passed exit_task_work()
  ncpfs: fix rmdir returns Device or resource busy
2013-06-14 19:18:56 -10:00
Oleg Nesterov
8aac62706a move exit_task_namespaces() outside of exit_notify()
exit_notify() does exit_task_namespaces() after
forget_original_parent(). This was needed to ensure that ->nsproxy
can't be cleared prematurely, an exiting child we are going to
reparent can do do_notify_parent() and use the parent's (ours) pid_ns.

However, after 32084504 "pidns: use task_active_pid_ns in
do_notify_parent" ->nsproxy != NULL is no longer needed, we rely
on task_active_pid_ns().

Move exit_task_namespaces() from exit_notify() to do_exit(), after
exit_fs() and before exit_task_work().

This solves the problem reported by Andrey, free_ipc_ns()->shm_destroy()
does fput() which needs task_work_add().

Note: this particular problem can be fixed if we change fput(), and
that change makes sense anyway. But there is another reason to move
the callsite. The original reason for exit_task_namespaces() from
the middle of exit_notify() was subtle and it has already gone away,
now this looks confusing. And this allows us do simplify exit_notify(),
we can avoid unlock/lock(tasklist) and we can use ->exit_state instead
of PF_EXITING in forget_original_parent().

Reported-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-15 05:39:08 +04:00
Linus Torvalds
cb7e9704d5 Merge branch 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fixes from Paul McKenney:
 "I must confess that this past merge window was not RCU's best showing.
  This series contains three more fixes for RCU regressions:

   1.   A fix to __DECLARE_TRACE_RCU() that causes it to act as an
        interrupt from idle rather than as a task switch from idle.
        This change is needed due to the recent use of _rcuidle()
        tracepoints that can be invoked from interrupt handlers as well
        as from idle.  Without this fix, invoking _rcuidle() tracepoints
        from interrupt handlers results in splats and (more seriously)
        confusion on RCU's part as to whether a given CPU is idle or not.
        This confusion can in turn result in too-short grace periods and
        therefore random memory corruption.

   2.   A fix to a subtle deadlock that could result due to RCU doing
        a wakeup while holding one of its rcu_node structure's locks.
        Although the probability of occurrence is low, it really
        does happen.  The fix, courtesy of Steven Rostedt, uses
        irq_work_queue() to avoid the deadlock.

   3.   A fix to a silent deadlock (invisible to lockdep) due to the
        interaction of timeouts posted by RCU debug code enabled by
        CONFIG_PROVE_RCU_DELAY=y, grace-period initialization, and CPU
        hotplug operations.  This will not occur in production kernels,
        but really does occur in randconfig testing.  Diagnosis courtesy
        of Steven Rostedt"

* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  rcu: Fix deadlock with CPU hotplug, RCU GP init, and timer migration
  rcu: Don't call wakeup() with rcu_node structure ->lock held
  trace: Allow idle-safe tracepoints to be called from irq
2013-06-13 12:36:42 -07:00
Linus Torvalds
a568fa1c91 Merge branch 'akpm' (updates from Andrew Morton)
Merge misc fixes from Andrew Morton:
 "Bunch of fixes and one little addition to math64.h"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (27 commits)
  include/linux/math64.h: add div64_ul()
  mm: memcontrol: fix lockless reclaim hierarchy iterator
  frontswap: fix incorrect zeroing and allocation size for frontswap_map
  kernel/audit_tree.c:audit_add_tree_rule(): protect `rule' from kill_rules()
  mm: migration: add migrate_entry_wait_huge()
  ocfs2: add missing lockres put in dlm_mig_lockres_handler
  mm/page_alloc.c: fix watermark check in __zone_watermark_ok()
  drivers/misc/sgi-gru/grufile.c: fix info leak in gru_get_config_info()
  aio: fix io_destroy() regression by using call_rcu()
  rtc-at91rm9200: use shadow IMR on at91sam9x5
  rtc-at91rm9200: add shadow interrupt mask
  rtc-at91rm9200: refactor interrupt-register handling
  rtc-at91rm9200: add configuration support
  rtc-at91rm9200: add match-table compile guard
  fs/ocfs2/namei.c: remove unecessary ERROR when removing non-empty directory
  swap: avoid read_swap_cache_async() race to deadlock while waiting on discard I/O completion
  drivers/rtc/rtc-twl.c: fix missing device_init_wakeup() when booted with device tree
  cciss: fix broken mutex usage in ioctl
  audit: wait_for_auditd() should use TASK_UNINTERRUPTIBLE
  drivers/rtc/rtc-cmos.c: fix accidentally enabling rtc channel
  ...
2013-06-12 16:29:53 -07:00
Chen Gang
736f3203a0 kernel/audit_tree.c:audit_add_tree_rule(): protect `rule' from kill_rules()
audit_add_tree_rule() must set 'rule->tree = NULL;' firstly, to protect
the rule itself freed in kill_rules().

The reason is when it is killed, the 'rule' itself may have already
released, we should not access it.  one example: we add a rule to an
inode, just at the same time the other task is deleting this inode.

The work flow for adding a rule:

    audit_receive() -> (need audit_cmd_mutex lock)
      audit_receive_skb() ->
        audit_receive_msg() ->
          audit_receive_filter() ->
            audit_add_rule() ->
              audit_add_tree_rule() -> (need audit_filter_mutex lock)
                ...
                unlock audit_filter_mutex
                get_tree()
                ...
                iterate_mounts() -> (iterate all related inodes)
                  tag_mount() ->
                    tag_trunk() ->
                      create_trunk() -> (assume it is 1st rule)
                        fsnotify_add_mark() ->
                          fsnotify_add_inode_mark() ->  (add mark to inode->i_fsnotify_marks)
                        ...
                        get_tree(); (each inode will get one)
                ...
                lock audit_filter_mutex

The work flow for deleting an inode:

    __destroy_inode() ->
     fsnotify_inode_delete() ->
       __fsnotify_inode_delete() ->
        fsnotify_clear_marks_by_inode() ->  (get mark from inode->i_fsnotify_marks)
          fsnotify_destroy_mark() ->
           fsnotify_destroy_mark_locked() ->
             audit_tree_freeing_mark() ->
               evict_chunk() ->
                 ...
                 tree->goner = 1
                 ...
                 kill_rules() ->   (assume current->audit_context == NULL)
                   call_rcu() ->   (rule->tree != NULL)
                     audit_free_rule_rcu() ->
                       audit_free_rule()
                 ...
                 audit_schedule_prune() ->  (assume current->audit_context == NULL)
                   kthread_run() ->    (need audit_cmd_mutex and audit_filter_mutex lock)
                     prune_one() ->    (delete it from prue_list)
                       put_tree(); (match the original get_tree above)

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12 16:29:46 -07:00
Oleg Nesterov
f000cfdde5 audit: wait_for_auditd() should use TASK_UNINTERRUPTIBLE
audit_log_start() does wait_for_auditd() in a loop until
audit_backlog_wait_time passes or audit_skb_queue has a room.

If signal_pending() is true this becomes a busy-wait loop, schedule() in
TASK_INTERRUPTIBLE won't block.

Thanks to Guy for fully investigating and explaining the problem.

(akpm: that'll cause the system to lock up on a non-preemptible
uniprocessor kernel)

(Guy: "Our customer was in fact running a uniprocessor machine, and they
reported a system hang.")

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Guy Streeter <streeter@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12 16:29:45 -07:00
Kees Cook
637241a900 kmsg: honor dmesg_restrict sysctl on /dev/kmsg
The dmesg_restrict sysctl currently covers the syslog method for access
dmesg, however /dev/kmsg isn't covered by the same protections.  Most
people haven't noticed because util-linux dmesg(1) defaults to using the
syslog method for access in older versions.  With util-linux dmesg(1)
defaults to reading directly from /dev/kmsg.

To fix /dev/kmsg, let's compare the existing interfaces and what they
allow:

 - /proc/kmsg allows:
  - open (SYSLOG_ACTION_OPEN) if CAP_SYSLOG since it uses a destructive
    single-reader interface (SYSLOG_ACTION_READ).
  - everything, after an open.

 - syslog syscall allows:
  - anything, if CAP_SYSLOG.
  - SYSLOG_ACTION_READ_ALL and SYSLOG_ACTION_SIZE_BUFFER, if
    dmesg_restrict==0.
  - nothing else (EPERM).

The use-cases were:
 - dmesg(1) needs to do non-destructive SYSLOG_ACTION_READ_ALLs.
 - sysklog(1) needs to open /proc/kmsg, drop privs, and still issue the
   destructive SYSLOG_ACTION_READs.

AIUI, dmesg(1) is moving to /dev/kmsg, and systemd-journald doesn't
clear the ring buffer.

Based on the comments in devkmsg_llseek, it sounds like actions besides
reading aren't going to be supported by /dev/kmsg (i.e.
SYSLOG_ACTION_CLEAR), so we have a strict subset of the non-destructive
syslog syscall actions.

To this end, move the check as Josh had done, but also rename the
constants to reflect their new uses (SYSLOG_FROM_CALL becomes
SYSLOG_FROM_READER, and SYSLOG_FROM_FILE becomes SYSLOG_FROM_PROC).
SYSLOG_FROM_READER allows non-destructive actions, and SYSLOG_FROM_PROC
allows destructive actions after a capabilities-constrained
SYSLOG_ACTION_OPEN check.

 - /dev/kmsg allows:
  - open if CAP_SYSLOG or dmesg_restrict==0
  - reading/polling, after open

Addresses https://bugzilla.redhat.com/show_bug.cgi?id=903192

[akpm@linux-foundation.org: use pr_warn_once()]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Christian Kujau <lists@nerdbynature.de>
Tested-by: Josh Boyer <jwboyer@redhat.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12 16:29:44 -07:00
Robin Holt
cf7df378aa reboot: rigrate shutdown/reboot to boot cpu
We recently noticed that reboot of a 1024 cpu machine takes approx 16
minutes of just stopping the cpus.  The slowdown was tracked to commit
f96972f2dc ("kernel/sys.c: call disable_nonboot_cpus() in
kernel_restart()").

The current implementation does all the work of hot removing the cpus
before halting the system.  We are switching to just migrating to the
boot cpu and then continuing with shutdown/reboot.

This also has the effect of not breaking x86's command line parameter
for specifying the reboot cpu.  Note, this code was shamelessly copied
from arch/x86/kernel/reboot.c with bits removed pertaining to the
reboot_cpu command line parameter.

Signed-off-by: Robin Holt <holt@sgi.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12 16:29:44 -07:00
Srivatsa S. Bhat
16e53dbf10 CPU hotplug: provide a generic helper to disable/enable CPU hotplug
There are instances in the kernel where we would like to disable CPU
hotplug (from sysfs) during some important operation.  Today the freezer
code depends on this and the code to do it was kinda tailor-made for
that.

Restructure the code and make it generic enough to be useful for other
usecases too.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12 16:29:44 -07:00
Linus Torvalds
45d53766b9 Yoshihiro Yunomae fixed a regression in the output format when using
one of the counter clocks. The new multibuffer code changed the trace_clock
 file to update the trace instances tr->clock_id but the actual traces still
 used the value from the obsolete global variable trace_clock_id.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJRt8hEAAoJEOdOSU1xswtM6+EH/jAEuOrXhkkDqcua/paAOngw
 XWSaF9Cr6ozh4hutFrVSBi3AnsDrVo0adZmMVvLS9a7goyIUdYLfXbNeyK6Nvcq5
 bGXR5sJNpjtQ7snrmGX2KlXIGix28adi49eACi4qsGSG/jJYORYlgXcNBeXtENsb
 PKTXdQ8XEyc/h7Q51YQPHIVunf+zJSoepuXZ0myPLUWzLlPX9qoy5kETEpGhh9xh
 Ianb4wLo8dn6JuVGBuXQhZ/VzUHwJT1jJxR2JfnZ0bNVplNilnumAxY8f2zPOmzT
 lvIiQjCMRvNExFShuFh9WNnGRi62zYE9e0JJpYL4W9moIcbbEUvXYt2/imAVe9Q=
 =H+Wb
 -----END PGP SIGNATURE-----

Merge tag 'trace-fixes-v3.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "Yoshihiro Yunomae fixed a regression in the output format when using
  one of the counter clocks.

  The new multibuffer code changed the trace_clock file to update the
  trace instances tr->clock_id but the actual traces still used the
  value from the obsolete global variable trace_clock_id"

* tag 'trace-fixes-v3.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix outputting formats of x86-tsc and counter when use trace_clock
2013-06-12 08:29:11 -07:00
Yoshihiro YUNOMAE
58e8eedf18 tracing: Fix outputting formats of x86-tsc and counter when use trace_clock
Outputting formats of x86-tsc and counter should be a raw format, but after
applying the patch(2b6080f28c), the format was
changed to nanosec. This is because the global variable trace_clock_id was used.
When we use multiple buffers, clock_id of each sub-buffer should be used. Then,
this patch uses tr->clock_id instead of the global variable trace_clock_id.

[ Basically, this fixes a regression where the multibuffer code changed the
  trace_clock file to update tr->clock_id but the traces still use the old
  global trace_clock_id variable, negating the file's effect. The global
  trace_clock_id variable is obsolete and removed. - SR ]

Link: http://lkml.kernel.org/r/20130423013239.22334.7394.stgit@yunodevel

Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-06-11 13:58:46 -04:00
Ben Greear
34376a50fb Fix lockup related to stop_machine being stuck in __do_softirq.
The stop machine logic can lock up if all but one of the migration
threads make it through the disable-irq step and the one remaining
thread gets stuck in __do_softirq.  The reason __do_softirq can hang is
that it has a bail-out based on jiffies timeout, but in the lockup case,
jiffies itself is not incremented.

To work around this, re-add the max_restart counter in __do_irq and stop
processing irqs after 10 restarts.

Thanks to Tejun Heo and Rusty Russell and others for helping me track
this down.

This was introduced in 3.9 by commit c10d73671a ("softirq: reduce
latencies").

It may be worth looking into ath9k to see if it has issues with its irq
handler at a later date.

The hang stack traces look something like this:

    ------------[ cut here ]------------
    WARNING: at kernel/watchdog.c:245 watchdog_overflow_callback+0x9c/0xa7()
    Watchdog detected hard LOCKUP on cpu 2
    Modules linked in: ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 nfsv4 auth_rpcgss nfs fscache nf_nat_ipv4 nf_nat veth 8021q garp stp mrp llc pktgen lockd sunrpc]
    Pid: 23, comm: migration/2 Tainted: G         C   3.9.4+ #11
    Call Trace:
     <NMI>   warn_slowpath_common+0x85/0x9f
      warn_slowpath_fmt+0x46/0x48
      watchdog_overflow_callback+0x9c/0xa7
      __perf_event_overflow+0x137/0x1cb
      perf_event_overflow+0x14/0x16
      intel_pmu_handle_irq+0x2dc/0x359
      perf_event_nmi_handler+0x19/0x1b
      nmi_handle+0x7f/0xc2
      do_nmi+0xbc/0x304
      end_repeat_nmi+0x1e/0x2e
     <<EOE>>
      cpu_stopper_thread+0xae/0x162
      smpboot_thread_fn+0x258/0x260
      kthread+0xc7/0xcf
      ret_from_fork+0x7c/0xb0
    ---[ end trace 4947dfa9b0a4cec3 ]---
    BUG: soft lockup - CPU#1 stuck for 22s! [migration/1:17]
    Modules linked in: ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 nfsv4 auth_rpcgss nfs fscache nf_nat_ipv4 nf_nat veth 8021q garp stp mrp llc pktgen lockd sunrpc]
    irq event stamp: 835637905
    hardirqs last  enabled at (835637904): __do_softirq+0x9f/0x257
    hardirqs last disabled at (835637905): apic_timer_interrupt+0x6d/0x80
    softirqs last  enabled at (5654720): __do_softirq+0x1ff/0x257
    softirqs last disabled at (5654725): irq_exit+0x5f/0xbb
    CPU 1
    Pid: 17, comm: migration/1 Tainted: G        WC   3.9.4+ #11 To be filled by O.E.M. To be filled by O.E.M./To be filled by O.E.M.
    RIP: tasklet_hi_action+0xf0/0xf0
    Process migration/1
    Call Trace:
     <IRQ>
      __do_softirq+0x117/0x257
      irq_exit+0x5f/0xbb
      smp_apic_timer_interrupt+0x8a/0x98
      apic_timer_interrupt+0x72/0x80
     <EOI>
      printk+0x4d/0x4f
      stop_machine_cpu_stop+0x22c/0x274
      cpu_stopper_thread+0xae/0x162
      smpboot_thread_fn+0x258/0x260
      kthread+0xc7/0xcf
      ret_from_fork+0x7c/0xb0

Signed-off-by: Ben Greear <greearb@candelatech.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Pekka Riikonen <priikone@iki.fi>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-10 17:46:57 -07:00
Paul E. McKenney
971394f389 rcu: Fix deadlock with CPU hotplug, RCU GP init, and timer migration
In Steven Rostedt's words:

> I've been debugging the last couple of days why my tests have been
> locking up. One of my tracing tests, runs all available tracers. The
> lockup always happened with the mmiotrace, which is used to trace
> interactions between priority drivers and the kernel. But to do this
> easily, when the tracer gets registered, it disables all but the boot
> CPUs. The lockup always happened after it got done disabling the CPUs.
>
> Then I decided to try this:
>
> while :; do
> 	for i in 1 2 3; do
> 		echo 0 > /sys/devices/system/cpu/cpu$i/online
> 	done
> 	for i in 1 2 3; do
> 		echo 1 > /sys/devices/system/cpu/cpu$i/online
> 	done
> done
>
> Well, sure enough, that locked up too, with the same users. Doing a
> sysrq-w (showing all blocked tasks):
>
> [ 2991.344562]   task                        PC stack   pid father
> [ 2991.344562] rcu_preempt     D ffff88007986fdf8     0    10      2 0x00000000
> [ 2991.344562]  ffff88007986fc98 0000000000000002 ffff88007986fc48 0000000000000908
> [ 2991.344562]  ffff88007986c280 ffff88007986ffd8 ffff88007986ffd8 00000000001d3c80
> [ 2991.344562]  ffff880079248a40 ffff88007986c280 0000000000000000 00000000fffd4295
> [ 2991.344562] Call Trace:
> [ 2991.344562]  [<ffffffff815437ba>] schedule+0x64/0x66
> [ 2991.344562]  [<ffffffff81541750>] schedule_timeout+0xbc/0xf9
> [ 2991.344562]  [<ffffffff8154bec0>] ? ftrace_call+0x5/0x2f
> [ 2991.344562]  [<ffffffff81049513>] ? cascade+0xa8/0xa8
> [ 2991.344562]  [<ffffffff815417ab>] schedule_timeout_uninterruptible+0x1e/0x20
> [ 2991.344562]  [<ffffffff810c980c>] rcu_gp_kthread+0x502/0x94b
> [ 2991.344562]  [<ffffffff81062791>] ? __init_waitqueue_head+0x50/0x50
> [ 2991.344562]  [<ffffffff810c930a>] ? rcu_gp_fqs+0x64/0x64
> [ 2991.344562]  [<ffffffff81061cdb>] kthread+0xb1/0xb9
> [ 2991.344562]  [<ffffffff81091e31>] ? lock_release_holdtime.part.23+0x4e/0x55
> [ 2991.344562]  [<ffffffff81061c2a>] ? __init_kthread_worker+0x58/0x58
> [ 2991.344562]  [<ffffffff8154c1dc>] ret_from_fork+0x7c/0xb0
> [ 2991.344562]  [<ffffffff81061c2a>] ? __init_kthread_worker+0x58/0x58
> [ 2991.344562] kworker/0:1     D ffffffff81a30680     0    47      2 0x00000000
> [ 2991.344562] Workqueue: events cpuset_hotplug_workfn
> [ 2991.344562]  ffff880078dbbb58 0000000000000002 0000000000000006 00000000000000d8
> [ 2991.344562]  ffff880078db8100 ffff880078dbbfd8 ffff880078dbbfd8 00000000001d3c80
> [ 2991.344562]  ffff8800779ca5c0 ffff880078db8100 ffffffff81541fcf 0000000000000000
> [ 2991.344562] Call Trace:
> [ 2991.344562]  [<ffffffff81541fcf>] ? __mutex_lock_common+0x3d4/0x609
> [ 2991.344562]  [<ffffffff815437ba>] schedule+0x64/0x66
> [ 2991.344562]  [<ffffffff81543a39>] schedule_preempt_disabled+0x18/0x24
> [ 2991.344562]  [<ffffffff81541fcf>] __mutex_lock_common+0x3d4/0x609
> [ 2991.344562]  [<ffffffff8103d11b>] ? get_online_cpus+0x3c/0x50
> [ 2991.344562]  [<ffffffff8103d11b>] ? get_online_cpus+0x3c/0x50
> [ 2991.344562]  [<ffffffff815422ff>] mutex_lock_nested+0x3b/0x40
> [ 2991.344562]  [<ffffffff8103d11b>] get_online_cpus+0x3c/0x50
> [ 2991.344562]  [<ffffffff810af7e6>] rebuild_sched_domains_locked+0x6e/0x3a8
> [ 2991.344562]  [<ffffffff810b0ec6>] rebuild_sched_domains+0x1c/0x2a
> [ 2991.344562]  [<ffffffff810b109b>] cpuset_hotplug_workfn+0x1c7/0x1d3
> [ 2991.344562]  [<ffffffff810b0ed9>] ? cpuset_hotplug_workfn+0x5/0x1d3
> [ 2991.344562]  [<ffffffff81058e07>] process_one_work+0x2d4/0x4d1
> [ 2991.344562]  [<ffffffff81058d3a>] ? process_one_work+0x207/0x4d1
> [ 2991.344562]  [<ffffffff8105964c>] worker_thread+0x2e7/0x3b5
> [ 2991.344562]  [<ffffffff81059365>] ? rescuer_thread+0x332/0x332
> [ 2991.344562]  [<ffffffff81061cdb>] kthread+0xb1/0xb9
> [ 2991.344562]  [<ffffffff81061c2a>] ? __init_kthread_worker+0x58/0x58
> [ 2991.344562]  [<ffffffff8154c1dc>] ret_from_fork+0x7c/0xb0
> [ 2991.344562]  [<ffffffff81061c2a>] ? __init_kthread_worker+0x58/0x58
> [ 2991.344562] bash            D ffffffff81a4aa80     0  2618   2612 0x10000000
> [ 2991.344562]  ffff8800379abb58 0000000000000002 0000000000000006 0000000000000c2c
> [ 2991.344562]  ffff880077fea140 ffff8800379abfd8 ffff8800379abfd8 00000000001d3c80
> [ 2991.344562]  ffff8800779ca5c0 ffff880077fea140 ffffffff81541fcf 0000000000000000
> [ 2991.344562] Call Trace:
> [ 2991.344562]  [<ffffffff81541fcf>] ? __mutex_lock_common+0x3d4/0x609
> [ 2991.344562]  [<ffffffff815437ba>] schedule+0x64/0x66
> [ 2991.344562]  [<ffffffff81543a39>] schedule_preempt_disabled+0x18/0x24
> [ 2991.344562]  [<ffffffff81541fcf>] __mutex_lock_common+0x3d4/0x609
> [ 2991.344562]  [<ffffffff81530078>] ? rcu_cpu_notify+0x2f5/0x86e
> [ 2991.344562]  [<ffffffff81530078>] ? rcu_cpu_notify+0x2f5/0x86e
> [ 2991.344562]  [<ffffffff815422ff>] mutex_lock_nested+0x3b/0x40
> [ 2991.344562]  [<ffffffff81530078>] rcu_cpu_notify+0x2f5/0x86e
> [ 2991.344562]  [<ffffffff81091c99>] ? __lock_is_held+0x32/0x53
> [ 2991.344562]  [<ffffffff81548912>] notifier_call_chain+0x6b/0x98
> [ 2991.344562]  [<ffffffff810671fd>] __raw_notifier_call_chain+0xe/0x10
> [ 2991.344562]  [<ffffffff8103cf64>] __cpu_notify+0x20/0x32
> [ 2991.344562]  [<ffffffff8103cf8d>] cpu_notify_nofail+0x17/0x36
> [ 2991.344562]  [<ffffffff815225de>] _cpu_down+0x154/0x259
> [ 2991.344562]  [<ffffffff81522710>] cpu_down+0x2d/0x3a
> [ 2991.344562]  [<ffffffff81526351>] store_online+0x4e/0xe7
> [ 2991.344562]  [<ffffffff8134d764>] dev_attr_store+0x20/0x22
> [ 2991.344562]  [<ffffffff811b3c5f>] sysfs_write_file+0x108/0x144
> [ 2991.344562]  [<ffffffff8114c5ef>] vfs_write+0xfd/0x158
> [ 2991.344562]  [<ffffffff8114c928>] SyS_write+0x5c/0x83
> [ 2991.344562]  [<ffffffff8154c494>] tracesys+0xdd/0xe2
>
> As well as held locks:
>
> [ 3034.728033] Showing all locks held in the system:
> [ 3034.728033] 1 lock held by rcu_preempt/10:
> [ 3034.728033]  #0:  (rcu_preempt_state.onoff_mutex){+.+...}, at: [<ffffffff810c9471>] rcu_gp_kthread+0x167/0x94b
> [ 3034.728033] 4 locks held by kworker/0:1/47:
> [ 3034.728033]  #0:  (events){.+.+.+}, at: [<ffffffff81058d3a>] process_one_work+0x207/0x4d1
> [ 3034.728033]  #1:  (cpuset_hotplug_work){+.+.+.}, at: [<ffffffff81058d3a>] process_one_work+0x207/0x4d1
> [ 3034.728033]  #2:  (cpuset_mutex){+.+.+.}, at: [<ffffffff810b0ec1>] rebuild_sched_domains+0x17/0x2a
> [ 3034.728033]  #3:  (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff8103d11b>] get_online_cpus+0x3c/0x50
> [ 3034.728033] 1 lock held by mingetty/2563:
> [ 3034.728033]  #0:  (&ldata->atomic_read_lock){+.+...}, at: [<ffffffff8131e28a>] n_tty_read+0x252/0x7e8
> [ 3034.728033] 1 lock held by mingetty/2565:
> [ 3034.728033]  #0:  (&ldata->atomic_read_lock){+.+...}, at: [<ffffffff8131e28a>] n_tty_read+0x252/0x7e8
> [ 3034.728033] 1 lock held by mingetty/2569:
> [ 3034.728033]  #0:  (&ldata->atomic_read_lock){+.+...}, at: [<ffffffff8131e28a>] n_tty_read+0x252/0x7e8
> [ 3034.728033] 1 lock held by mingetty/2572:
> [ 3034.728033]  #0:  (&ldata->atomic_read_lock){+.+...}, at: [<ffffffff8131e28a>] n_tty_read+0x252/0x7e8
> [ 3034.728033] 1 lock held by mingetty/2575:
> [ 3034.728033]  #0:  (&ldata->atomic_read_lock){+.+...}, at: [<ffffffff8131e28a>] n_tty_read+0x252/0x7e8
> [ 3034.728033] 7 locks held by bash/2618:
> [ 3034.728033]  #0:  (sb_writers#5){.+.+.+}, at: [<ffffffff8114bc3f>] file_start_write+0x2a/0x2c
> [ 3034.728033]  #1:  (&buffer->mutex#2){+.+.+.}, at: [<ffffffff811b3b93>] sysfs_write_file+0x3c/0x144
> [ 3034.728033]  #2:  (s_active#54){.+.+.+}, at: [<ffffffff811b3c3e>] sysfs_write_file+0xe7/0x144
> [ 3034.728033]  #3:  (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [<ffffffff810217c2>] cpu_hotplug_driver_lock+0x17/0x19
> [ 3034.728033]  #4:  (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff8103d196>] cpu_maps_update_begin+0x17/0x19
> [ 3034.728033]  #5:  (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff8103cfd8>] cpu_hotplug_begin+0x2c/0x6d
> [ 3034.728033]  #6:  (rcu_preempt_state.onoff_mutex){+.+...}, at: [<ffffffff81530078>] rcu_cpu_notify+0x2f5/0x86e
> [ 3034.728033] 1 lock held by bash/2980:
> [ 3034.728033]  #0:  (&ldata->atomic_read_lock){+.+...}, at: [<ffffffff8131e28a>] n_tty_read+0x252/0x7e8
>
> Things looked a little weird. Also, this is a deadlock that lockdep did
> not catch. But what we have here does not look like a circular lock
> issue:
>
> Bash is blocked in rcu_cpu_notify():
>
> 1961		/* Exclude any attempts to start a new grace period. */
> 1962		mutex_lock(&rsp->onoff_mutex);
>
>
> kworker is blocked in get_online_cpus(), which makes sense as we are
> currently taking down a CPU.
>
> But rcu_preempt is not blocked on anything. It is simply sleeping in
> rcu_gp_kthread (really rcu_gp_init) here:
>
> 1453	#ifdef CONFIG_PROVE_RCU_DELAY
> 1454			if ((prandom_u32() % (rcu_num_nodes * 8)) == 0 &&
> 1455			    system_state == SYSTEM_RUNNING)
> 1456				schedule_timeout_uninterruptible(2);
> 1457	#endif /* #ifdef CONFIG_PROVE_RCU_DELAY */
>
> And it does this while holding the onoff_mutex that bash is waiting for.
>
> Doing a function trace, it showed me where it happened:
>
> [  125.940066] rcu_pree-10      3.... 28384115273: schedule_timeout_uninterruptible <-rcu_gp_kthread
> [...]
> [  125.940066] rcu_pree-10      3d..3 28384202439: sched_switch: prev_comm=rcu_preempt prev_pid=10 prev_prio=120 prev_state=D ==> next_comm=watchdog/3 next_pid=38 next_prio=120
>
> The watchdog ran, and then:
>
> [  125.940066] watchdog-38      3d..3 28384692863: sched_switch: prev_comm=watchdog/3 prev_pid=38 prev_prio=120 prev_state=P ==> next_comm=modprobe next_pid=2848 next_prio=118
>
> Not sure what modprobe was doing, but shortly after that:
>
> [  125.940066] modprobe-2848    3d..3 28385041749: sched_switch: prev_comm=modprobe prev_pid=2848 prev_prio=118 prev_state=R+ ==> next_comm=migration/3 next_pid=40 next_prio=0
>
> Where the migration thread took down the CPU:
>
> [  125.940066] migratio-40      3d..3 28389148276: sched_switch: prev_comm=migration/3 prev_pid=40 prev_prio=0 prev_state=P ==> next_comm=swapper/3 next_pid=0 next_prio=120
>
> which finally did:
>
> [  125.940066]   <idle>-0       3...1 28389282142: arch_cpu_idle_dead <-cpu_startup_entry
> [  125.940066]   <idle>-0       3...1 28389282548: native_play_dead <-arch_cpu_idle_dead
> [  125.940066]   <idle>-0       3...1 28389282924: play_dead_common <-native_play_dead
> [  125.940066]   <idle>-0       3...1 28389283468: idle_task_exit <-play_dead_common
> [  125.940066]   <idle>-0       3...1 28389284644: amd_e400_remove_cpu <-play_dead_common
>
>
> CPU 3 is now offline, the rcu_preempt thread that ran on CPU 3 is still
> doing a schedule_timeout_uninterruptible() and it registered it's
> timeout to the timer base for CPU 3. You would think that it would get
> migrated right? The issue here is that the timer migration happens at
> the CPU notifier for CPU_DEAD. The problem is that the rcu notifier for
> CPU_DOWN is blocked waiting for the onoff_mutex to be released, which is
> held by the thread that just put itself into a uninterruptible sleep,
> that wont wake up until the CPU_DEAD notifier of the timer
> infrastructure is called, which wont happen until the rcu notifier
> finishes. Here's our deadlock!

This commit breaks this deadlock cycle by substituting a shorter udelay()
for the previous schedule_timeout_uninterruptible(), while at the same
time increasing the probability of the delay.  This maintains the intensity
of the testing.

Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
2013-06-10 13:37:12 -07:00
Steven Rostedt
016a8d5be6 rcu: Don't call wakeup() with rcu_node structure ->lock held
This commit fixes a lockdep-detected deadlock by moving a wake_up()
call out from a rnp->lock critical section.  Please see below for
the long version of this story.

On Tue, 2013-05-28 at 16:13 -0400, Dave Jones wrote:

> [12572.705832] ======================================================
> [12572.750317] [ INFO: possible circular locking dependency detected ]
> [12572.796978] 3.10.0-rc3+ #39 Not tainted
> [12572.833381] -------------------------------------------------------
> [12572.862233] trinity-child17/31341 is trying to acquire lock:
> [12572.870390]  (rcu_node_0){..-.-.}, at: [<ffffffff811054ff>] rcu_read_unlock_special+0x9f/0x4c0
> [12572.878859]
> but task is already holding lock:
> [12572.894894]  (&ctx->lock){-.-...}, at: [<ffffffff811390ed>] perf_lock_task_context+0x7d/0x2d0
> [12572.903381]
> which lock already depends on the new lock.
>
> [12572.927541]
> the existing dependency chain (in reverse order) is:
> [12572.943736]
> -> #4 (&ctx->lock){-.-...}:
> [12572.960032]        [<ffffffff810b9851>] lock_acquire+0x91/0x1f0
> [12572.968337]        [<ffffffff816ebc90>] _raw_spin_lock+0x40/0x80
> [12572.976633]        [<ffffffff8113c987>] __perf_event_task_sched_out+0x2e7/0x5e0
> [12572.984969]        [<ffffffff81088953>] perf_event_task_sched_out+0x93/0xa0
> [12572.993326]        [<ffffffff816ea0bf>] __schedule+0x2cf/0x9c0
> [12573.001652]        [<ffffffff816eacfe>] schedule_user+0x2e/0x70
> [12573.009998]        [<ffffffff816ecd64>] retint_careful+0x12/0x2e
> [12573.018321]
> -> #3 (&rq->lock){-.-.-.}:
> [12573.034628]        [<ffffffff810b9851>] lock_acquire+0x91/0x1f0
> [12573.042930]        [<ffffffff816ebc90>] _raw_spin_lock+0x40/0x80
> [12573.051248]        [<ffffffff8108e6a7>] wake_up_new_task+0xb7/0x260
> [12573.059579]        [<ffffffff810492f5>] do_fork+0x105/0x470
> [12573.067880]        [<ffffffff81049686>] kernel_thread+0x26/0x30
> [12573.076202]        [<ffffffff816cee63>] rest_init+0x23/0x140
> [12573.084508]        [<ffffffff81ed8e1f>] start_kernel+0x3f1/0x3fe
> [12573.092852]        [<ffffffff81ed856f>] x86_64_start_reservations+0x2a/0x2c
> [12573.101233]        [<ffffffff81ed863d>] x86_64_start_kernel+0xcc/0xcf
> [12573.109528]
> -> #2 (&p->pi_lock){-.-.-.}:
> [12573.125675]        [<ffffffff810b9851>] lock_acquire+0x91/0x1f0
> [12573.133829]        [<ffffffff816ebe9b>] _raw_spin_lock_irqsave+0x4b/0x90
> [12573.141964]        [<ffffffff8108e881>] try_to_wake_up+0x31/0x320
> [12573.150065]        [<ffffffff8108ebe2>] default_wake_function+0x12/0x20
> [12573.158151]        [<ffffffff8107bbf8>] autoremove_wake_function+0x18/0x40
> [12573.166195]        [<ffffffff81085398>] __wake_up_common+0x58/0x90
> [12573.174215]        [<ffffffff81086909>] __wake_up+0x39/0x50
> [12573.182146]        [<ffffffff810fc3da>] rcu_start_gp_advanced.isra.11+0x4a/0x50
> [12573.190119]        [<ffffffff810fdb09>] rcu_start_future_gp+0x1c9/0x1f0
> [12573.198023]        [<ffffffff810fe2c4>] rcu_nocb_kthread+0x114/0x930
> [12573.205860]        [<ffffffff8107a91d>] kthread+0xed/0x100
> [12573.213656]        [<ffffffff816f4b1c>] ret_from_fork+0x7c/0xb0
> [12573.221379]
> -> #1 (&rsp->gp_wq){..-.-.}:
> [12573.236329]        [<ffffffff810b9851>] lock_acquire+0x91/0x1f0
> [12573.243783]        [<ffffffff816ebe9b>] _raw_spin_lock_irqsave+0x4b/0x90
> [12573.251178]        [<ffffffff810868f3>] __wake_up+0x23/0x50
> [12573.258505]        [<ffffffff810fc3da>] rcu_start_gp_advanced.isra.11+0x4a/0x50
> [12573.265891]        [<ffffffff810fdb09>] rcu_start_future_gp+0x1c9/0x1f0
> [12573.273248]        [<ffffffff810fe2c4>] rcu_nocb_kthread+0x114/0x930
> [12573.280564]        [<ffffffff8107a91d>] kthread+0xed/0x100
> [12573.287807]        [<ffffffff816f4b1c>] ret_from_fork+0x7c/0xb0

Notice the above call chain.

rcu_start_future_gp() is called with the rnp->lock held. Then it calls
rcu_start_gp_advance, which does a wakeup.

You can't do wakeups while holding the rnp->lock, as that would mean
that you could not do a rcu_read_unlock() while holding the rq lock, or
any lock that was taken while holding the rq lock. This is because...
(See below).

> [12573.295067]
> -> #0 (rcu_node_0){..-.-.}:
> [12573.309293]        [<ffffffff810b8d36>] __lock_acquire+0x1786/0x1af0
> [12573.316568]        [<ffffffff810b9851>] lock_acquire+0x91/0x1f0
> [12573.323825]        [<ffffffff816ebc90>] _raw_spin_lock+0x40/0x80
> [12573.331081]        [<ffffffff811054ff>] rcu_read_unlock_special+0x9f/0x4c0
> [12573.338377]        [<ffffffff810760a6>] __rcu_read_unlock+0x96/0xa0
> [12573.345648]        [<ffffffff811391b3>] perf_lock_task_context+0x143/0x2d0
> [12573.352942]        [<ffffffff8113938e>] find_get_context+0x4e/0x1f0
> [12573.360211]        [<ffffffff811403f4>] SYSC_perf_event_open+0x514/0xbd0
> [12573.367514]        [<ffffffff81140e49>] SyS_perf_event_open+0x9/0x10
> [12573.374816]        [<ffffffff816f4dd4>] tracesys+0xdd/0xe2

Notice the above trace.

perf took its own ctx->lock, which can be taken while holding the rq
lock. While holding this lock, it did a rcu_read_unlock(). The
perf_lock_task_context() basically looks like:

rcu_read_lock();
raw_spin_lock(ctx->lock);
rcu_read_unlock();

Now, what looks to have happened, is that we scheduled after taking that
first rcu_read_lock() but before taking the spin lock. When we scheduled
back in and took the ctx->lock, the following rcu_read_unlock()
triggered the "special" code.

The rcu_read_unlock_special() takes the rnp->lock, which gives us a
possible deadlock scenario.

	CPU0		CPU1		CPU2
	----		----		----

				     rcu_nocb_kthread()
    lock(rq->lock);
		    lock(ctx->lock);
				     lock(rnp->lock);

				     wake_up();

				     lock(rq->lock);

		    rcu_read_unlock();

		    rcu_read_unlock_special();

		    lock(rnp->lock);
    lock(ctx->lock);

**** DEADLOCK ****

> [12573.382068]
> other info that might help us debug this:
>
> [12573.403229] Chain exists of:
>   rcu_node_0 --> &rq->lock --> &ctx->lock
>
> [12573.424471]  Possible unsafe locking scenario:
>
> [12573.438499]        CPU0                    CPU1
> [12573.445599]        ----                    ----
> [12573.452691]   lock(&ctx->lock);
> [12573.459799]                                lock(&rq->lock);
> [12573.467010]                                lock(&ctx->lock);
> [12573.474192]   lock(rcu_node_0);
> [12573.481262]
>  *** DEADLOCK ***
>
> [12573.501931] 1 lock held by trinity-child17/31341:
> [12573.508990]  #0:  (&ctx->lock){-.-...}, at: [<ffffffff811390ed>] perf_lock_task_context+0x7d/0x2d0
> [12573.516475]
> stack backtrace:
> [12573.530395] CPU: 1 PID: 31341 Comm: trinity-child17 Not tainted 3.10.0-rc3+ #39
> [12573.545357]  ffffffff825b4f90 ffff880219f1dbc0 ffffffff816e375b ffff880219f1dc00
> [12573.552868]  ffffffff816dfa5d ffff880219f1dc50 ffff88023ce4d1f8 ffff88023ce4ca40
> [12573.560353]  0000000000000001 0000000000000001 ffff88023ce4d1f8 ffff880219f1dcc0
> [12573.567856] Call Trace:
> [12573.575011]  [<ffffffff816e375b>] dump_stack+0x19/0x1b
> [12573.582284]  [<ffffffff816dfa5d>] print_circular_bug+0x200/0x20f
> [12573.589637]  [<ffffffff810b8d36>] __lock_acquire+0x1786/0x1af0
> [12573.596982]  [<ffffffff810918f5>] ? sched_clock_cpu+0xb5/0x100
> [12573.604344]  [<ffffffff810b9851>] lock_acquire+0x91/0x1f0
> [12573.611652]  [<ffffffff811054ff>] ? rcu_read_unlock_special+0x9f/0x4c0
> [12573.619030]  [<ffffffff816ebc90>] _raw_spin_lock+0x40/0x80
> [12573.626331]  [<ffffffff811054ff>] ? rcu_read_unlock_special+0x9f/0x4c0
> [12573.633671]  [<ffffffff811054ff>] rcu_read_unlock_special+0x9f/0x4c0
> [12573.640992]  [<ffffffff811390ed>] ? perf_lock_task_context+0x7d/0x2d0
> [12573.648330]  [<ffffffff810b429e>] ? put_lock_stats.isra.29+0xe/0x40
> [12573.655662]  [<ffffffff813095a0>] ? delay_tsc+0x90/0xe0
> [12573.662964]  [<ffffffff810760a6>] __rcu_read_unlock+0x96/0xa0
> [12573.670276]  [<ffffffff811391b3>] perf_lock_task_context+0x143/0x2d0
> [12573.677622]  [<ffffffff81139070>] ? __perf_event_enable+0x370/0x370
> [12573.684981]  [<ffffffff8113938e>] find_get_context+0x4e/0x1f0
> [12573.692358]  [<ffffffff811403f4>] SYSC_perf_event_open+0x514/0xbd0
> [12573.699753]  [<ffffffff8108cd9d>] ? get_parent_ip+0xd/0x50
> [12573.707135]  [<ffffffff810b71fd>] ? trace_hardirqs_on_caller+0xfd/0x1c0
> [12573.714599]  [<ffffffff81140e49>] SyS_perf_event_open+0x9/0x10
> [12573.721996]  [<ffffffff816f4dd4>] tracesys+0xdd/0xe2

This commit delays the wakeup via irq_work(), which is what
perf and ftrace use to perform wakeups in critical sections.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2013-06-10 13:37:11 -07:00
Linus Torvalds
81db4dbf59 Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:

 - Trivial: unused variable removal

 - Posix-timers: Add the clock ID to the new proc interface to make it
   useful.  The interface is new and should be functional when we reach
   the final 3.10 release.

 - Cure a false positive warning in the tick code introduced by the
   overhaul in 3.10

 - Fix for a persistent clock detection regression introduced in this
   cycle

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Correct run-time detection of persistent_clock.
  ntp: Remove unused variable flags in __hardpps
  posix-timers: Show clock ID in proc file
  tick: Cure broadcast false positive pending bit warning
2013-06-08 15:51:21 -07:00
Linus Torvalds
c3e58a7945 irqdomain bug fixes for v3.10-rc4
This branch contains a set of straight forward bug fixes to the
 irqdomain code and to a couple of drivers that make use of it.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRs51nAAoJEEFnBt12D9kBmnUP/RCgaTn5biRD0tC6OCGwvsZr
 YKypc71cZtbO3CTk1Sw2jgDUoW+2FWwtbwKWCmrHIaulRuxoeMHLbpc6fEGFRAjG
 ENnSEuSJkYV2T5ZoYjM5mAjotHUcszxZ9uOz7ovCUY72GO/+tfJ97NT9+CCpPfWV
 Wa/i08/91UPbWP1ASfMLXVzqO9uqEYvrrvY2PSqJ/g0BkzbybAg38u6IycZkGW4u
 /mjglx5fYRhcQgl7o1FDaw97AGjbykt2mgP7EK3R24BxvEy4gmn4IzGo9duOf7Y2
 b1tEfro/keRoibuKehPWdKTvpda80DUJjrsOwmNveZHTWlSB8GZXqCEmOmTHngrV
 gNX6MUVZClUvKiQCDo3ibyZUmIuUnnlRee6WqQzr2VsMiwct449Gg81zwXX+Yn7O
 5KOnlyicJur3f4HqQSKEA2CXU6RRCmk2iqCFMqtutxy20cmm3LoW7OM7rFF7tzix
 g6czKZiX+yKwoP2E2EQ2mYM8cirKeEyPhs4EUnKJJOVVZqOCtHkrKnkbSoithsS3
 we6Isj8KM8NQ3fgeFsbcxV+ezK3moIzD0fYr3Q6x25VZLYrYH7XpUix0nlGYxCOK
 vlEpCaMes/IG/+SKElf8fPoxs0qlOYPvYZBrLjUGCG/VB01bNsj0mjKYm1va+f6v
 n3zQbGS7X+TiiHQ+EFL0
 =wZCk
 -----END PGP SIGNATURE-----

Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux

Pull irqdomain bug fixes from Grant Likely:
 "This branch contains a set of straight forward bug fixes to the
  irqdomain code and to a couple of drivers that make use of it."

* tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux:
  irqchip: Return -EPERM for reserved IRQs
  irqdomain: document the simple domain first_irq
  kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid.
  irqdomain: export irq_domain_add_simple
2013-06-08 15:50:42 -07:00
Linus Walleij
94a63da0ac irqdomain: document the simple domain first_irq
The first_irq needs to be zero to get a linear domain and that
comes with special semantics. We want to simplify this going
forward but some documentation never hurts.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-08 21:15:09 +01:00
Chen Gang
275e31b10c kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid.
Since irq_data may be NULL, if so, we WARN_ON(), and continue, 'hwirq'
which related with 'irq_data' has to initialize later, or it will cause
issue.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-08 21:15:09 +01:00
Arnd Bergmann
346dbb79ea irqdomain: export irq_domain_add_simple
All other irq_domain_add_* functions are exported already, and apparently
this one got left out by mistake, which causes build errors for ARM
allmodconfig kernels:

ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-rcar.ko] undefined!
ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-em.ko] undefined!

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-08 21:15:08 +01:00
Linus Torvalds
14d0ee0517 This contains 4 fixes.
The first two fix the case where full RCU debugging is enabled, enabling
 function tracing causes a live lock of the system. This is due to the added
 debug checks in rcu_dereference_raw() that is used by the function tracer.
 These checks are also traced by the function tracer as well as cause enough
 overhead to the function tracer to slow down the system enough that
 the time to finish an interrupt can take longer than when the next
 interrupt is triggered, causing a live lock from the timer interrupt.
 
 Talking this over with Paul McKenney, we came up with a fix that adds
 a new rcu_dereference_raw_notrace() that does not perform these added checks,
 and let the function tracer use that.
 
 The third commit fixes a failed compile when branch tracing is enabled,
 due to the conversion of the trace_test_buffer() selftest that the
 branch trace wasn't converted for.
 
 The forth patch fixes a bug caught by the RCU lockdep code where a
 rcu_read_lock() is performed when rcu is disabled (either going to
 or from idle, or user space). This happened on the irqsoff tracer
 as it calls task_uid(). The fix here was to use current_uid() when
 possible that doesn't use rcu locking. Which luckily, is always used
 when irqsoff calls this code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJRsQZhAAoJEOdOSU1xswtMquIH/0zyrqrLTnkc5MsNnnJ8kH5R
 z1cULts4FqBTUNZ1hdb3BTOu4zywjREIkWfM9qqpBmq9Mq6PBxX7gxWTqYvD4jiX
 EatiiCKa7Fyddx4iHJNfvtWgKVYt9WKSNeloRugS9h7NxIZ1wpz21DUpENFQzW2f
 jWRnq/AKXFmZ0vn1953mPePtRsg61RYpb7DCkTE1gtUnvL43wMd/Mo6p6BLMEG26
 1dDK6EWO/uewl8A4oP5JZYP+AP5Ckd4x1PuQK682AtQw+8S6etaGfeJr0WZmKQoD
 0aDZ/NXXSNKChlUFGJusBNJCWryONToa+sdiKuk1h/lW/k9Mail/FChiHBzMiwk=
 =uvlD
 -----END PGP SIGNATURE-----

Merge tag 'trace-fixes-v3.10-rc3-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "This contains 4 fixes.

  The first two fix the case where full RCU debugging is enabled,
  enabling function tracing causes a live lock of the system.  This is
  due to the added debug checks in rcu_dereference_raw() that is used by
  the function tracer.  These checks are also traced by the function
  tracer as well as cause enough overhead to the function tracer to slow
  down the system enough that the time to finish an interrupt can take
  longer than when the next interrupt is triggered, causing a live lock
  from the timer interrupt.

  Talking this over with Paul McKenney, we came up with a fix that adds
  a new rcu_dereference_raw_notrace() that does not perform these added
  checks, and let the function tracer use that.

  The third commit fixes a failed compile when branch tracing is
  enabled, due to the conversion of the trace_test_buffer() selftest
  that the branch trace wasn't converted for.

  The forth patch fixes a bug caught by the RCU lockdep code where a
  rcu_read_lock() is performed when rcu is disabled (either going to or
  from idle, or user space).  This happened on the irqsoff tracer as it
  calls task_uid().  The fix here was to use current_uid() when possible
  that doesn't use rcu locking.  Which luckily, is always used when
  irqsoff calls this code."

* tag 'trace-fixes-v3.10-rc3-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Use current_uid() for critical time tracing
  tracing: Fix bad parameter passed in branch selftest
  ftrace: Use the rcu _notrace variants for rcu_dereference_raw() and friends
  rcu: Add _notrace variation of rcu_dereference_raw() and hlist_for_each_entry_rcu()
2013-06-07 18:46:51 -07:00
Steven Rostedt (Red Hat)
f17a519485 tracing: Use current_uid() for critical time tracing
The irqsoff tracer records the max time that interrupts are disabled.
There are hooks in the assembly code that calls back into the tracer when
interrupts are disabled or enabled.

When they are enabled, the tracer checks if the amount of time they
were disabled is larger than the previous recorded max interrupts off
time. If it is, it creates a snapshot of the currently running trace
to store where the last largest interrupts off time was held and how
it happened.

During testing, this RCU lockdep dump appeared:

[ 1257.829021] ===============================
[ 1257.829021] [ INFO: suspicious RCU usage. ]
[ 1257.829021] 3.10.0-rc1-test+ #171 Tainted: G        W
[ 1257.829021] -------------------------------
[ 1257.829021] /home/rostedt/work/git/linux-trace.git/include/linux/rcupdate.h:780 rcu_read_lock() used illegally while idle!
[ 1257.829021]
[ 1257.829021] other info that might help us debug this:
[ 1257.829021]
[ 1257.829021]
[ 1257.829021] RCU used illegally from idle CPU!
[ 1257.829021] rcu_scheduler_active = 1, debug_locks = 0
[ 1257.829021] RCU used illegally from extended quiescent state!
[ 1257.829021] 2 locks held by trace-cmd/4831:
[ 1257.829021]  #0:  (max_trace_lock){......}, at: [<ffffffff810e2b77>] stop_critical_timing+0x1a3/0x209
[ 1257.829021]  #1:  (rcu_read_lock){.+.+..}, at: [<ffffffff810dae5a>] __update_max_tr+0x88/0x1ee
[ 1257.829021]
[ 1257.829021] stack backtrace:
[ 1257.829021] CPU: 3 PID: 4831 Comm: trace-cmd Tainted: G        W    3.10.0-rc1-test+ #171
[ 1257.829021] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
[ 1257.829021]  0000000000000001 ffff880065f49da8 ffffffff8153dd2b ffff880065f49dd8
[ 1257.829021]  ffffffff81092a00 ffff88006bd78680 ffff88007add7500 0000000000000003
[ 1257.829021]  ffff88006bd78680 ffff880065f49e18 ffffffff810daebf ffffffff810dae5a
[ 1257.829021] Call Trace:
[ 1257.829021]  [<ffffffff8153dd2b>] dump_stack+0x19/0x1b
[ 1257.829021]  [<ffffffff81092a00>] lockdep_rcu_suspicious+0x109/0x112
[ 1257.829021]  [<ffffffff810daebf>] __update_max_tr+0xed/0x1ee
[ 1257.829021]  [<ffffffff810dae5a>] ? __update_max_tr+0x88/0x1ee
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810dbf85>] update_max_tr_single+0x11d/0x12d
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810e2b15>] stop_critical_timing+0x141/0x209
[ 1257.829021]  [<ffffffff8109569a>] ? trace_hardirqs_on+0xd/0xf
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810e3057>] time_hardirqs_on+0x2a/0x2f
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff8109550c>] trace_hardirqs_on_caller+0x16/0x197
[ 1257.829021]  [<ffffffff8109569a>] trace_hardirqs_on+0xd/0xf
[ 1257.829021]  [<ffffffff811002b9>] user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810029b4>] do_notify_resume+0x92/0x97
[ 1257.829021]  [<ffffffff8154bdca>] int_signal+0x12/0x17

What happened was entering into the user code, the interrupts were enabled
and a max interrupts off was recorded. The trace buffer was saved along with
various information about the task: comm, pid, uid, priority, etc.

The uid is recorded with task_uid(tsk). But this is a macro that uses rcu_read_lock()
to retrieve the data, and this happened to happen where RCU is blind (user_enter).

As only the preempt and irqs off tracers can have this happen, and they both
only have the tsk == current, if tsk == current, use current_uid() instead of
task_uid(), as current_uid() does not use RCU as only current can change its uid.

This fixes the RCU suspicious splat.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-06-06 12:35:30 -04:00
Linus Torvalds
7d80fea426 Merge branch 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:

 - Fix for yet another xattr bug which may lead to NULL deref.

 - A subtle bug in for_each_descendant_pre().  This bug requires quite
   specific conditions to trigger and isn't too likely to actually
   happen in the wild, but maybe that just makes it that much more
   nastier.

 - A warning message added for silly cgroup re-mount (not -o remount,
   but unmount followed by mount) behavior.

* 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: warn about mismatching options of a new mount of an existing hierarchy
  cgroup: fix a subtle bug in descendant pre-order walk
  cgroup: initialize xattr before calling d_instantiate()
2013-06-03 17:57:16 +09:00
Linus Torvalds
484b002e28 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:

 - Three EFI-related fixes

 - Two early memory initialization fixes

 - build fix for older binutils

 - fix for an eager FPU performance regression -- currently we don't
   allow the use of the FPU at interrupt time *at all* in eager mode,
   which is clearly wrong.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Allow FPU to be used at interrupt time even with eagerfpu
  x86, crc32-pclmul: Fix build with older binutils
  x86-64, init: Fix a possible wraparound bug in switchover in head_64.S
  x86, range: fix missing merge during add range
  x86, efi: initial the local variable of DataSize to zero
  efivar: fix oops in efivar_update_sysfs_entries() caused by memory reuse
  efivarfs: Never return ENOENT from firmware again
2013-05-31 09:44:10 +09:00
Steven Rostedt (Red Hat)
0184d50f9f tracing: Fix bad parameter passed in branch selftest
The branch selftest calls trace_test_buffer(), but with the new code
it expects the first parameter to be a pointer to a struct trace_buffer.
All self tests were changed but the branch selftest was missed.

This caused either a crash or failed test when the branch selftest was
enabled.

Link: http://lkml.kernel.org/r/20130529141333.GA24064@localhost

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-05-29 16:00:03 -04:00
Thomas Gleixner
67dd331c5d Merge branch 'fortglx/3.10/time' of git://git.linaro.org/people/jstultz/linux into timers/urgent 2013-05-29 09:55:01 +02:00
Steven Rostedt
1bb539ca36 ftrace: Use the rcu _notrace variants for rcu_dereference_raw() and friends
As rcu_dereference_raw() under RCU debug config options can add quite a
bit of checks, and that tracing uses rcu_dereference_raw(), these checks
happen with the function tracer. The function tracer also happens to trace
these debug checks too. This added overhead can livelock the system.

Have the function tracer use the new RCU _notrace equivalents that do
not do the debug checks for RCU.

Link: http://lkml.kernel.org/r/20130528184209.467603904@goodmis.org

Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-05-28 22:48:00 -04:00
Jeff Liu
2a0ff3fbe3 cgroup: warn about mismatching options of a new mount of an existing hierarchy
With the new __DEVEL__sane_behavior mount option was introduced,
if the root cgroup is alive with no xattr function, to mount a
new cgroup with xattr will be rejected in terms of design which
just fine.  However, if the root cgroup does not mounted with
__DEVEL__sane_hehavior, to create a new cgroup with xattr option
will succeed although after that the EA function does not works
as expected but will get ENOTSUPP for setting up attributes under
either cgroup. e.g.

setfattr: /cgroup2/test: Operation not supported

Instead of keeping silence in this case, it's better to drop a log
entry in warning level.  That would be helpful to understand the
reason behind the scene from the user's perspective, and this is
essentially an improvement does not break the backward compatibilities.

With this fix, above mount attemption will keep up works as usual but
the following line cound be found at the system log:

[ ...] cgroup: new mount options do not match the existing superblock

tj: minor formatting / message updates.

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reported-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2013-05-29 07:59:39 +09:00
Zoran Markovic
0d6bd9953f timekeeping: Correct run-time detection of persistent_clock.
Since commit 31ade30692, timekeeping_init()
checks for presence of persistent clock by attempting to read a non-zero
time value. This is an issue on platforms where persistent_clock (instead
is implemented as a free-running counter (instead of an RTC) starting
from zero on each boot and running during suspend. Examples are some ARM
platforms (e.g. PandaBoard).

An attempt to read such a clock during timekeeping_init() may return zero
value and falsely declare persistent clock as missing. Additionally, in
the above case suspend times may be accounted twice (once from
timekeeping_resume() and once from rtc_resume()), resulting in a gradual
drift of system time.

This patch does a run-time correction of the issue by doing the same check
during timekeeping_suspend().

A better long-term solution would have to return error when trying to read
non-existing clock and zero when trying to read an uninitialized clock, but
that would require changing all persistent_clock implementations.

This patch addresses the immediate breakage, for now.

Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Zoran Markovic <zoran.markovic@linaro.org>
[jstultz: Tweaked commit message and subject]
Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-05-28 13:45:19 -07:00
Geert Uytterhoeven
aa848233f7 ntp: Remove unused variable flags in __hardpps
kernel/time/ntp.c: In function ‘__hardpps’:
kernel/time/ntp.c:877: warning: unused variable ‘flags’

commit a076b2146f ("ntp: Remove ntp_lock,
using the timekeeping locks to protect ntp state") removed its users,
but not the actual variable.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-05-28 13:45:19 -07:00
Linus Torvalds
e3bf756eb9 Two more fixes:
The first one was reported by Mauro Carvalho Chehab, where if a poll()
 is done against a trace buffer for a CPU that has never been online,
 it will crash the kernel, as buffers are only created when a CPU comes
 on line, but the trace files are for all possible CPUs.
 
 This fix is to check if the buffer was allocated and if not return -EINVAL.
 
 That was the simple fix, the real fix is a bit more complex and not for
 a -rc release. We could have the files created when the CPUs come online.
 That would require some design changes.
 
 The second one was reported by Peter Zijlstra. If the kernel command line
 has ftrace=nop, it will lock up the system on boot up. This is because
 the new design for 3.10 has the nop tracer bootstrap the tracing subsystem.
 When ftrace=<trace> is defined, when a that tracer is registered, it
 starts the tracing, but uses the nop tracer to clear things out.
 What happened here was that ftrace=nop caused the registering of nop
 to start it and use nop before it was initialized.
 
 The only thing nop needs to have done to initialize it is to have the
 tracer point its current_tracer structure member to the nop tracer.
 Doing that before registering the nop tracer makes everything work.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJRpMkPAAoJEOdOSU1xswtMxeEIALWCnqSCKZJ0Oz+2TuR15vd2
 Szm/knRBktRG2FizN8FIouXXMLIYM5HFSvO3Q2bWuV4Dv5KaqNcCEL5BggZC/+Rj
 swt5+rMiUuln0teq792h2LhKwORw0YicLzWsyIZ82iSpcFKAseXqcMzEe/P/Emat
 +J1QaoeDtOx/3X5Sv6tqHomqR80u7phQJwmIK6Yik389yLo3sy2XiPRk9PJqDpac
 V9xbCnZlnopm7rLo7pEAI3R6Vn+MX6lrY1MO0xxjqeIvhvxr9nk0WIRnaevyARbt
 eHnCtfa9pjn+bU9xYaFmyIkilc/IEBFRLb0dtEueH81nmaFDXpHI+h/pEFrDJqE=
 =PR0j
 -----END PGP SIGNATURE-----

Merge tag 'trace-fixes-v3.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "Two more fixes:

  The first one was reported by Mauro Carvalho Chehab, where if a poll()
  is done against a trace buffer for a CPU that has never been online,
  it will crash the kernel, as buffers are only created when a CPU comes
  on line, but the trace files are for all possible CPUs.

  This fix is to check if the buffer was allocated and if not return
  -EINVAL.

  That was the simple fix, the real fix is a bit more complex and not
  for a -rc release.  We could have the files created when the CPUs come
  online.  That would require some design changes.

  The second one was reported by Peter Zijlstra.  If the kernel command
  line has ftrace=nop, it will lock up the system on boot up.  This is
  because the new design for 3.10 has the nop tracer bootstrap the
  tracing subsystem.  When ftrace=<trace> is defined, when a that tracer
  is registered, it starts the tracing, but uses the nop tracer to clear
  things out.  What happened here was that ftrace=nop caused the
  registering of nop to start it and use nop before it was initialized.

  The only thing nop needs to have done to initialize it is to have the
  tracer point its current_tracer structure member to the nop tracer.
  Doing that before registering the nop tracer makes everything work."

* tag 'trace-fixes-v3.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ring-buffer: Do not poll non allocated cpu buffers
  tracing: Fix crash when ftrace=nop on the kernel command line
2013-05-28 09:39:04 -07:00
Steven Rostedt (Red Hat)
6721cb6002 ring-buffer: Do not poll non allocated cpu buffers
The tracing infrastructure sets up for possible CPUs, but it uses
the ring buffer polling, it is possible to call the ring buffer
polling code with a CPU that hasn't been allocated. This will cause
a kernel oops when it access a ring buffer cpu buffer that is part
of the possible cpus but hasn't been allocated yet as the CPU has never
been online.

Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-05-28 10:53:20 -04:00
Thomas Gleixner
2938d2757f tick: Cure broadcast false positive pending bit warning
commit 26517f3e (tick: Avoid programming the local cpu timer if
broadcast pending) added a warning if the cpu enters broadcast mode
again while the pending bit is still set. Meelis reported that the
warning triggers. There are two corner cases which have been not
considered:

1) cpuidle calls clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER)
   twice. That can result in the following scenario

   CPU0                    CPU1
                           cpuidle_idle_call()
                             clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER)
                               set cpu in tick_broadcast_oneshot_mask

   broadcast interrupt
     event expired for cpu1
     set pending bit

                             acpi_idle_enter_simple()
                               clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER)
                                 WARN_ON(pending bit)

  Move the WARN_ON into the section where we enter broadcast mode so
  it wont provide false positives on the second call.

2) safe_halt() enables interrupts, so a broadcast interrupt can be
   delivered befor the broadcast mode is disabled. That sets the
   pending bit for the CPU which receives the broadcast
   interrupt. Though the interrupt is delivered right away from the
   broadcast handler and leaves the pending bit stale.

   Clear the pending bit for the current cpu in the broadcast handler.

Reported-and-tested-by: Meelis Roos <mroos@linux.ee>
Cc: Len Brown <lenb@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305271841130.4220@ionos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-28 09:33:01 +02:00
Randy Dunlap
387b8b3e37 auditfilter.c: fix kernel-doc warnings
Fix kernel-doc warnings in kernel/auditfilter.c:

  Warning(kernel/auditfilter.c:1029): Excess function parameter 'loginuid' description in 'audit_receive_filter'
  Warning(kernel/auditfilter.c:1029): Excess function parameter 'sessionid' description in 'audit_receive_filter'
  Warning(kernel/auditfilter.c:1029): Excess function parameter 'sid' description in 'audit_receive_filter'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-24 16:22:52 -07:00
Linus Torvalds
17fdfd0851 Masami Hiramatsu fixed another bug. This time returning a proper
result in event_enable_func(). After checking the return status
 of try_module_get(), it returned the status of try_module_get(). But
 try_module_get() returns 0 on failure, which is success for
 event_enable_func().
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJRnQn/AAoJEOdOSU1xswtMVDUH/3rOPX2/sbc817NN+KjXJiQi
 1O8tmiOcaqMh742Df2YWSqXeM5IjARjl/xSZqazpGaDVu6HnMbEeb3Frx9hpzOPu
 VEtBapasrPK6TOYSDfLaUuRsxuzSEsXR4dUexSh3o7f0/b1dY8x0BwiYxz3tz5BS
 x6HX9OptUXUKDrloNC0qlX7ymuWmaeGULsTgCYYORfMe2FRFfvJhoCZFgC6dLw5x
 YTubQuhVyNOD/X5jXM5h9kkUSw70VjGMhlqilyp0YLcnrhFL/QhCi7WR3b3hDwcp
 MUpJyMAaPXlQHs2Q/gh46XldyhULPXamrujx8ISsDDdMQlWsWPTsQgfJ8e4/zsQ=
 =n9S7
 -----END PGP SIGNATURE-----

Merge tag 'trace-fixes-v3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "Masami Hiramatsu fixed another bug.  This time returning a proper
  result in event_enable_func().  After checking the return status of
  try_module_get(), it returned the status of try_module_get().

  But try_module_get() returns 0 on failure, which is success for
  event_enable_func()"

* tag 'trace-fixes-v3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Return -EBUSY when event_enable_func() fails to get module
2013-05-24 10:46:55 -07:00
Tejun Heo
7805d000db cgroup: fix a subtle bug in descendant pre-order walk
When cgroup_next_descendant_pre() initiates a walk, it checks whether
the subtree root doesn't have any children and if not returns NULL.
Later code assumes that the subtree isn't empty.  This is broken
because the subtree may become empty inbetween, which can lead to the
traversal escaping the subtree by walking to the sibling of the
subtree root.

There's no reason to have the early exit path.  Remove it along with
the later assumption that the subtree isn't empty.  This simplifies
the code a bit and fixes the subtle bug.

While at it, fix the comment of cgroup_for_each_descendant_pre() which
was incorrectly referring to ->css_offline() instead of
->css_online().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: stable@vger.kernel.org
2013-05-24 10:50:24 +09:00
Steven Rostedt (Red Hat)
ca1643186d tracing: Fix crash when ftrace=nop on the kernel command line
If ftrace=<tracer> is on the kernel command line, when that tracer is
registered, it will be initiated by tracing_set_tracer() to execute that
tracer.

The nop tracer is just a stub tracer that is used to have no tracer
enabled. It is assigned at early bootup as it is the default tracer.

But if ftrace=nop is on the kernel command line, the registering of the
nop tracer will call tracing_set_tracer() which will try to execute
the nop tracer. But it expects tr->current_trace to be assigned something
as it usually is assigned to the nop tracer. As it hasn't been assigned
to anything yet, it causes the system to crash.

The simple fix is to move the tr->current_trace = nop before registering
the nop tracer. The functionality is still the same as the nop tracer
doesn't do anything anyway.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-05-23 11:57:25 -04:00
Linus Torvalds
8f05bde9bd Kmemleak now scans all the writable and non-executable module sections
to avoid false positives (previously it was only scanning specific
 sections and missing .ref.data).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.9 (GNU/Linux)
 
 iQIcBAABAgAGBQJRlnWwAAoJEGvWsS0AyF7x5EEP/Rb1yjDKgw6RdBdHCAa4CokX
 gmOwTW2PVLuNqxu3JUE+GQHTAkZnLHFLzT4uSI4CAs0YdrdI+aCnJvy2jK6vZ0WC
 bD66hMxOoiJ4sZSA+mU19Zjwb1pRFWi9+sOrYgrC+AbYd45Y6psshn0kog+HslXa
 y2fv/VKqfSUMRJ+lB2p6jXcwxB1bFm4jcYM8OleKhdbb7QUkAZjftpg83hkTSq3n
 +eHQZxWTaeVubwFDmRQf2nPkixNrSI0ZTbOKgHUBJLvNAsxY2/eE3cvJY17NbfdH
 Hq9o7FmWPyRYrVHUzo5S0LbFev3tGUxLzc53G8DfajXRQbNwtAVhkpfX9vV2toH4
 ze/3dIMboUC+yRR9oH0pdRVwndq8oPtWAAKxfOrXKcm+jue2obtQDuswvEmtaufF
 ez10vF02doPZgjDeXKZY6hO2LeyjSh82opk4oSMmgsBjTBlsXxrelNAbMxHIiSnx
 SClCJUm+0PcAhxyehmOb2N95CmGi0sZd2Nwo0QAOBK/B3gyWxtz5qGQ0iADT5wsH
 fI2KLduzyEKNv5phF5Ct8BdA3p89J64/K9HDnV5dA1W8aRudE8fdEpOHlIb3mbn5
 NsMg4ahhKPOJM1IX+YBSCXxJapgBAumlXwfXzQi3CzUF0iBmRS2enybbLtR/fxU6
 5+o92idKeq9NQwhmGH7v
 =LeOH
 -----END PGP SIGNATURE-----

Merge tag 'kmemleak-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64

Pull kmemleak patches from Catalin Marinas:
 "Kmemleak now scans all the writable and non-executable module sections
  to avoid false positives (previously it was only scanning specific
  sections and missing .ref.data)."

* tag 'kmemleak-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  kmemleak: No need for scanning specific module sections
  kmemleak: Scan all allocated, writeable and not executable module sections
2013-05-18 10:21:32 -07:00
Yinghai Lu
fbe06b7bae x86, range: fix missing merge during add range
Christian found v3.9 does not work with E350 with EFI is enabled.

[    1.658832] Trying to unpack rootfs image as initramfs...
[    1.679935] BUG: unable to handle kernel paging request at ffff88006e3fd000
[    1.686940] IP: [<ffffffff813661df>] memset+0x1f/0xb0
[    1.692010] PGD 1f77067 PUD 1f7a067 PMD 61420067 PTE 0

but early memtest report all memory could be accessed without problem.

early page table is set in following sequence:
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000] init_memory_mapping: [mem 0x6e600000-0x6e7fffff]
[    0.000000] init_memory_mapping: [mem 0x6c000000-0x6e5fffff]
[    0.000000] init_memory_mapping: [mem 0x00100000-0x6bffffff]
[    0.000000] init_memory_mapping: [mem 0x6e800000-0x6ea07fff]
but later efi_enter_virtual_mode try set mapping again wrongly.
[    0.010644] pid_max: default: 32768 minimum: 301
[    0.015302] init_memory_mapping: [mem 0x640c5000-0x6e3fcfff]
that means it fails with pfn_range_is_mapped.

It turns out that we have a bug in add_range_with_merge and it does not
merge range properly when new add one fill the hole between two exsiting
ranges. In the case when [mem 0x00100000-0x6bffffff] is the hole between
[mem 0x00000000-0x000fffff] and [mem 0x6c000000-0x6e7fffff].

Fix the add_range_with_merge by calling itself recursively.

Reported-by: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/CAE9FiQVofGoSk7q5-0irjkBxemqK729cND4hov-1QCBJDhxpgQ@mail.gmail.com
Cc: <stable@vger.kernel.org> v3.9
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-05-17 11:49:10 -07:00
Steven Rostedt
89c837351d kmemleak: No need for scanning specific module sections
As kmemleak now scans all module sections that are allocated, writable
and non executable, there's no need to scan individual sections that
might reference data.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
2013-05-17 09:53:36 +01:00
Steven Rostedt
06c9494c0e kmemleak: Scan all allocated, writeable and not executable module sections
Instead of just picking data sections by name (names that start
with .data, .bss or .ref.data), use the section flags and scan all
sections that are allocated, writable and not executable. Which should
cover all sections of a module that might reference data.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[catalin.marinas@arm.com: removed unused 'name' variable]
[catalin.marinas@arm.com: collapsed 'if' blocks]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
2013-05-17 09:53:07 +01:00
Linus Torvalds
4a007ed926 Merge branch 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
 "Three more workqueue regression fixes.

   - Fix unbalanced unlock in trylock failure path of manage_workers().
     This shouldn't happen often in the wild but is possible.

   - While making schedule_work() and friends inline, they become
     unavailable to !GPL modules.  Allow !GPL modules to access basic
     stuff - system_wq and queue_*work_on() - so that schedule_work()
     and friends can be used.

   - During boot, the unbound NUMA support code allocates a cpumask for
     each possible node using alloc_cpumask_var_node(), which ends up
     trying to allocate node-specific memory even for offline nodes
     triggering BUG in the memory alloc code.  Use NUMA_NO_NODE for
     offline nodes."

* 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: don't perform NUMA-aware allocations on offline nodes in wq_numa_init()
  workqueue: Make schedule_work() available again to non GPL modules
  workqueue: correct handling of the pool spin_lock
2013-05-16 12:03:28 -07:00
Linus Torvalds
ff89acc563 Merge branch 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fixes from Paul McKenney:
 "A couple of fixes for RCU regressions:

   - A boneheaded boolean-logic bug that resulted in excessive delays on
     boot, hibernation and suspend that was reported by Borislav Petkov,
     Bjørn Mork, and Joerg Roedel.  The fix inserts a single "!".

   - A fix for a boot-time splat due to allocating from bootmem too late
     in boot, fix courtesy of Sasha Levin with additional help from
     Yinghai Lu."

* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  rcu: Don't allocate bootmem from rcu_init()
  rcu: Fix comparison sense in rcu_needs_cpu()
2013-05-16 12:02:07 -07:00
Oleg Nesterov
264b83c07a usermodehelper: check subprocess_info->path != NULL
argv_split(empty_or_all_spaces) happily succeeds, it simply returns
argc == 0 and argv[0] == NULL. Change call_usermodehelper_exec() to
check sub_info->path != NULL to avoid the crash.

This is the minimal fix, todo:

 - perhaps we should change argv_split() to return NULL or change the
   callers.

 - kill or justify ->path[0] check

 - narrow the scope of helper_lock()

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-By: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-16 12:01:11 -07:00
Masami Hiramatsu
6ed0106667 tracing: Return -EBUSY when event_enable_func() fails to get module
Since try_module_get() returns false( = 0) when it fails to
pindown a module, event_enable_func() returns 0 which means
"succeed". This can cause a kernel panic when the entry
is removed, because the event is already released.

This fixes the bug by returning -EBUSY, because the reason
why it fails is that the module is being removed at that time.

Link: http://lkml.kernel.org/r/20130516114848.13508.97899.stgit@mhiramat-M0-7522

Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-05-16 11:01:16 -04:00
Tejun Heo
1be0c25da5 workqueue: don't perform NUMA-aware allocations on offline nodes in wq_numa_init()
wq_numa_init() builds per-node cpumasks which are later used to make
unbound workqueues NUMA-aware.  The cpumasks are allocated using
alloc_cpumask_var_node() for all possible nodes.  Unfortunately, on
machines with off-line nodes, this leads to NUMA-aware allocations on
existing bug offline nodes, which in turn triggers BUG in the memory
allocation code.

Fix it by using NUMA_NO_NODE for cpumask allocations for offline
nodes.

  kernel BUG at include/linux/gfp.h:323!
  invalid opcode: 0000 [#1] SMP
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0+ #1
  Hardware name: ProLiant BL465c G7, BIOS A19 12/10/2011
  task: ffff880234608000 ti: ffff880234602000 task.ti: ffff880234602000
  RIP: 0010:[<ffffffff8117495d>]  [<ffffffff8117495d>] new_slab+0x2ad/0x340
  RSP: 0000:ffff880234603bf8  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff880237404b40 RCX: 00000000000000d0
  RDX: 0000000000000001 RSI: 0000000000000003 RDI: 00000000002052d0
  RBP: ffff880234603c28 R08: 0000000000000000 R09: 0000000000000001
  R10: 0000000000000001 R11: ffffffff812e3aa8 R12: 0000000000000001
  R13: ffff8802378161c0 R14: 0000000000030027 R15: 00000000000040d0
  FS:  0000000000000000(0000) GS:ffff880237800000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: ffff88043fdff000 CR3: 00000000018d5000 CR4: 00000000000007f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Stack:
   ffff880234603c28 0000000000000001 00000000000000d0 ffff8802378161c0
   ffff880237404b40 ffff880237404b40 ffff880234603d28 ffffffff815edba1
   ffff880237816140 0000000000000000 ffff88023740e1c0
  Call Trace:
   [<ffffffff815edba1>] __slab_alloc+0x330/0x4f2
   [<ffffffff81174b25>] kmem_cache_alloc_node_trace+0xa5/0x200
   [<ffffffff812e3aa8>] alloc_cpumask_var_node+0x28/0x90
   [<ffffffff81a0bdb3>] wq_numa_init+0x10d/0x1be
   [<ffffffff81a0bec8>] init_workqueues+0x64/0x341
   [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0
   [<ffffffff819f1f31>] kernel_init_freeable+0xb7/0x1ec
   [<ffffffff815d50de>] kernel_init+0xe/0xf0
   [<ffffffff815ff89c>] ret_from_fork+0x7c/0xb0
  Code: 45  84 ac 00 00 00 f0 41 80 4d 00 40 e9 f6 fe ff ff 66 0f 1f 84 00 00 00 00 00 e8 eb 4b ff ff 49 89 c5 e9 05 fe ff ff <0f> 0b 4c 8b 73 38 44 89 ff 81 cf 00 00 20 00 4c 89 f6 48 c1 ee

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-Tested-by: Lingzhu Xiang <lxiang@redhat.com>
2013-05-15 14:24:24 -07:00
Linus Torvalds
c240a539df This includes a fix to a memory leak when adding filters to traces.
Also, Masami Hiramatsu fixed up some minor bugs that were discovered
 by sparse.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJRk+PYAAoJEOdOSU1xswtMgO4H/AlePQ4IEOfXgy43Xx8S7Uew
 FmvHYmUi5l6UuFRLxcVZBsnSqo3i43UGyj9Lm+g1wBwNP3IDEf+t+fVaN4UP18KW
 C+5OoEWyJLe4BlQoVsdBV1+lmivacG3uczvAPY6fibyTqbJN67uzufPLw8ruBMOo
 dIIXWUR1sKRyy9+SF23q0rwf5ZfuavlMnmeTZ6omk0evbVT2q0lbpUeN/V1Rrxmc
 ZUObTyoFvVMvPYnwutGh7+QB/o0LR9C6MPyyFTvz/o9bD9CDXdbTvSQatoYrbEm8
 9/0hpetm+KJpa2M9mf4djeXWCIFX3gBuQ156LEFhS68Ug+HDWQ7Yv9iJQmmR6OE=
 =ZToX
 -----END PGP SIGNATURE-----

Merge tag 'trace-fixes-v3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "This includes a fix to a memory leak when adding filters to traces.

  Also, Masami Hiramatsu fixed up some minor bugs that were discovered
  by sparse."

* tag 'trace-fixes-v3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/kprobes: Make print_*probe_event static
  tracing/kprobes: Fix a sparse warning for incorrect type in assignment
  tracing/kprobes: Use rcu_dereference_raw for tp->files
  tracing: Fix leaks of filter preds
2013-05-15 14:08:57 -07:00
Linus Torvalds
652df602f8 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:

 - Fix for a task exit cleanup race caused by a missing a preempt
   disable

 - Cleanup of the event notification functions with a massive reduction
   of duplicated code

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Factor out auxiliary events notification
  perf: Fix EXIT event notification
2013-05-15 14:07:02 -07:00
Linus Torvalds
cc51bf6e6d Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:

 - Cure for not using zalloc in the first place, which leads to random
   crashes with CPUMASK_OFF_STACK.

 - Revert a user space visible change which broke udev

 - Add a missing cpu_online early return introduced by the new full
   dyntick conversions

 - Plug a long standing race in the timer wheel cpu hotplug code.
   Sigh...

 - Cleanup NOHZ per cpu data on cpu down to prevent stale data on cpu
   up.

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Revert ALWAYS_USE_PERSISTENT_CLOCK compile time optimizaitons
  timer: Don't reinitialize the cpu base lock during CPU_UP_PREPARE
  tick: Don't invoke tick_nohz_stop_sched_tick() if the cpu is offline
  tick: Cleanup NOHZ per cpu data on cpu down
  tick: Use zalloc_cpumask_var for allocating offstack cpumasks
2013-05-15 14:05:17 -07:00
Linus Torvalds
37cae5e249 Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fixes from Thomas Gleixner:

 - Two fixlets for the fallout of the generic idle task conversion

 - Documentation update

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu/idle: Wrap cpu-idle poll mode within rcu_idle_enter/exit
  idle: Fix hlt/nohlt command-line handling in new generic idle
  kthread: Document ways of reducing OS jitter due to per-CPU kthreads
2013-05-15 14:04:00 -07:00
Masami Hiramatsu
b62fdd97fc tracing/kprobes: Make print_*probe_event static
According to sparse warning, print_*probe_event static because
those functions are not directly called from outside.

Link: http://lkml.kernel.org/r/20130513115839.6545.83067.stgit@mhiramat-M0-7522

Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-05-15 13:50:24 -04:00