mirror of
https://github.com/torvalds/linux.git
synced 2024-11-16 00:52:01 +00:00
3d5a55ddc2
34266 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Linus Torvalds
|
5ca26d6039 |
Including fixes from wireless and netfilter.
Current release - regressions: - phy: multiple fixes for EEE rework - wifi: wext: warn about usage only once - wifi: ath11k: allow system suspend to survive ath11k Current release - new code bugs: - mlx5: Fix memory leak in IPsec RoCE creation - ibmvnic: assign XPS map to correct queue index Previous releases - regressions: - netfilter: ip6t_rpfilter: Fix regression with VRF interfaces - netfilter: ctnetlink: make event listener tracking global - nf_tables: allow to fetch set elements when table has an owner - mlx5: - fix skb leak while fifo resync and push - fix possible ptp queue fifo use-after-free Previous releases - always broken: - sched: fix action bind logic - ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also uses a mutex - netfilter: conntrack: fix rmmod double-free race - netfilter: xt_length: use skb len to match in length_mt6, avoid issues with BIG TCP Misc: - ice: remove unnecessary CONFIG_ICE_GNSS - mlx5e: remove hairpin write debugfs files - sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmP9JgYACgkQMUZtbf5S IrsIRRAApy4Hjb8z5z3k4HOM2lA3b/3OWD301I5YtoU3FC4L938yETAPFYUGbWrX rKN4YOTNh2Fvkgbni7vz9hbC84C6i86Q9+u7dT1U+kCk3kbyQPFZlEDj5fY0I8zK 1xweCRrC1CcG74S2M5UO3UnWz1ypWQpTnHfWZqq0Duh1j9Xc+MHjHC2IKrGnzM6U 1/ODk9FrtsWC+KGJlWwiV+yJMYUA4nCKIS/NrmdRlBa7eoP0oC1xkA8g0kz3/P3S O+xMyhExcZbMYY5VMkiGBZ5l8Ve3t6lHcMXq7jWlSCOeXd4Ut6zzojHlGZjzlCy9 RQQJzva2wlltqB9rECUQixpZbVS6ubf5++zvACOKONhSIEdpWjZW9K/qsV8igbfM Xx0hsG1jCBt/xssRw2UBsq73vjNf1AkdksvqJgcggAvBJU8cV3MxRRB4/9lyPdmB NNFqehwCeE3aU0FSBKoxZVYpfg+8J/XhwKT63Cc2d1ENetsWk/LxvkYm24aokpW+ nn+jUH9AYk3rFlBVQG1xsCwU4VlGk/yZgRwRMYFBqPkAGcXLZOnqdoSviBPN3yN0 Habs1hxToMt3QBgLJcMVn8CYdWCJgnZpxs8Mfo+PGoWKHzQ9kXBdyYyIZm1GyesD BN/2QN38yMGXRALd2NXS2Va4ygX7KptB7+HsitdkzKCqcp1Ao+I= =Ko4p -----END PGP SIGNATURE----- Merge tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless and netfilter. The notable fixes here are the EEE fix which restores boot for many embedded platforms (real and QEMU); WiFi warning suppression and the ICE Kconfig cleanup. Current release - regressions: - phy: multiple fixes for EEE rework - wifi: wext: warn about usage only once - wifi: ath11k: allow system suspend to survive ath11k Current release - new code bugs: - mlx5: Fix memory leak in IPsec RoCE creation - ibmvnic: assign XPS map to correct queue index Previous releases - regressions: - netfilter: ip6t_rpfilter: Fix regression with VRF interfaces - netfilter: ctnetlink: make event listener tracking global - nf_tables: allow to fetch set elements when table has an owner - mlx5: - fix skb leak while fifo resync and push - fix possible ptp queue fifo use-after-free Previous releases - always broken: - sched: fix action bind logic - ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also uses a mutex - netfilter: conntrack: fix rmmod double-free race - netfilter: xt_length: use skb len to match in length_mt6, avoid issues with BIG TCP Misc: - ice: remove unnecessary CONFIG_ICE_GNSS - mlx5e: remove hairpin write debugfs files - sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy" * tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits) tcp: tcp_check_req() can be called from process context net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard xen-netback: remove unused variables pending_idx and index net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy net: dsa: ocelot_ext: remove unnecessary phylink.h include net: mscc: ocelot: fix duplicate driver name error net: dsa: felix: fix internal MDIO controller resource length net: dsa: seville: ignore mscc-miim read errors from Lynx PCS net/sched: act_sample: fix action bind logic net/sched: act_mpls: fix action bind logic net/sched: act_pedit: fix action bind logic wifi: wext: warn about usage only once wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue qede: avoid uninitialized entries in coal_entry array nfc: fix memory leak of se_io context in nfc_genl_se_io ice: remove unnecessary CONFIG_ICE_GNSS net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy() ibmvnic: Assign XPS map to correct queue index docs: net: fix inaccuracies in msg_zerocopy.rst tools: net: add __pycache__ to gitignore ... |
||
Ilya Leoshkevich
|
0a504fa1a7 |
libbpf: Document bpf_{btf,link,map,prog}_get_info_by_fd()
Replace the short informal description with the proper doc comments. Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230220234958.764997-1-iii@linux.ibm.com |
||
Puranjay Mohan
|
06943ae675 |
libbpf: Fix arm syscall regs spec in bpf_tracing.h
The syscall register definitions for ARM in bpf_tracing.h doesn't define
the fifth parameter for the syscalls. Because of this some KPROBES based
selftests fail to compile for ARM architecture.
Define the fifth parameter that is passed in the R5 register (uregs[4]).
Fixes:
|
||
Rong Tao
|
11e456cae9 |
selftests/bpf: Fix compilation errors: Assign a value to a constant
Commit bc292ab00f6c("mm: introduce vma->vm_flags wrapper functions") turns the vm_flags into a const variable. Added bpf_find_vma test in commit f108662b27c9("selftests/bpf: Add tests for bpf_find_vma") to assign values to variables that declare const in find_vma_fail1.c programs, which is an error to the compiler and does not test BPF verifiers. It is better to replace 'const vm_flags_t vm_flags' with 'unsigned long vm_start' for testing. $ make -C tools/testing/selftests/bpf/ -j8 ... progs/find_vma_fail1.c:16:16: error: cannot assign to non-static data member 'vm_flags' with const-qualified type 'const vm_flags_t' (aka 'const unsigned long') vma->vm_flags |= 0x55; ~~~~~~~~~~~~~ ^ ../tools/testing/selftests/bpf/tools/include/vmlinux.h:1898:20: note: non-static data member 'vm_flags' declared const here const vm_flags_t vm_flags; ~~~~~~~~~~~`~~~~~~^~~~~~~~ Signed-off-by: Rong Tao <rongtao@cestc.cn> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/tencent_CB281722B3C1BD504C16CDE586CACC2BE706@qq.com |
||
Luis Gerhorst
|
c679bbd611 |
tools: bpftool: Remove invalid \' json escape
RFC8259 ("The JavaScript Object Notation (JSON) Data Interchange
Format") only specifies \", \\, \/, \b, \f, \n, \r, and \r as valid
two-character escape sequences. This does not include \', which is not
required in JSON because it exclusively uses double quotes as string
separators.
Solidus (/) may be escaped, but does not have to. Only reverse
solidus (\), double quotes ("), and the control characters have to be
escaped. Therefore, with this fix, bpftool correctly supports all valid
two-character escape sequences (but still does not support characters
that require multi-character escape sequences).
Witout this fix, attempting to load a JSON file generated by bpftool
using Python 3.10.6's default json.load() may fail with the error
"Invalid \escape" if the file contains the invalid escaped single
quote (\').
Fixes:
|
||
Tiezhu Yang
|
84c22fa83f |
selftests/bpf: Use __NR_prlimit64 instead of __NR_getrlimit in user_ringbuf test
After commit
|
||
Tiezhu Yang
|
29c66ad1c3 |
libbpf: Use struct user_pt_regs to define __PT_REGS_CAST() for LoongArch
LoongArch provides struct user_pt_regs instead of struct pt_regs to userspace, use struct user_pt_regs to define __PT_REGS_CAST() to fix the following build error: CLNG-BPF [test_maps] loop1.bpf.o progs/loop1.c:22:9: error: incomplete definition of type 'struct pt_regs' m = PT_REGS_RC(ctx); ^~~~~~~~~~~~~~~ tools/testing/selftests/bpf/tools/include/bpf/bpf_tracing.h:493:41: note: expanded from macro 'PT_REGS_RC' #define PT_REGS_RC(x) (__PT_REGS_CAST(x)->__PT_RC_REG) ~~~~~~~~~~~~~~~~~^ tools/testing/selftests/bpf/tools/include/bpf/bpf_helper_defs.h:20:8: note: forward declaration of 'struct pt_regs' struct pt_regs; ^ 1 error generated. make: *** [Makefile:572: tools/testing/selftests/bpf/loop1.bpf.o] Error 1 make: Leaving directory 'tools/testing/selftests/bpf' Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/1677235015-21717-2-git-send-email-yangtiezhu@loongson.cn |
||
Linus Torvalds
|
84cc6674b7 |
virtio,vhost,vdpa: features, fixes
device feature provisioning in ifcvf, mlx5 new SolidNET driver support for zoned block device in virtio blk numa support in virtio pmem VIRTIO_F_RING_RESET support in vhost-net more debugfs entries in mlx5 resume support in vdpa completion batching in virtio blk cleanup of dma api use in vdpa now simulating more features in vdpa-sim documentation, features, fixes all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmP0D98PHG1zdEByZWRo YXQuY29tAAoJECgfDbjSjVRpV6IH/iecRgLMWWjp3n31IFdu31f/J4HpF7dczVjK qtV98eJ1N2pkgeJkdCfmB5XszfvFBeAurrS7++FTHiJhrRfR3Z+2ml/Qtvh5DEyP qxz6wOw6VVsi/txdUxM1wsxLeEmmzkmFdAmPM+FXeIjhWj76GOgy/4A3eaj6TgzV W8ShsBve/UZ5qMOC3XbIscvdOrudHJ18tH90Tiz3NZfH1fAs5E4uWbU6Mrz9DJVr canGvf4kAI9z8qram5HSgzPIXRJEYiF4q/eiStdtiiME8gL1mHLRZDNP1I1LeCAb q6Q6RCRKi3Ek+LGdH6u+nR1Swu03N2b/g+vgKtv30kJo06oZVzw= =EasV -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: - device feature provisioning in ifcvf, mlx5 - new SolidNET driver - support for zoned block device in virtio blk - numa support in virtio pmem - VIRTIO_F_RING_RESET support in vhost-net - more debugfs entries in mlx5 - resume support in vdpa - completion batching in virtio blk - cleanup of dma api use in vdpa - now simulating more features in vdpa-sim - documentation, features, fixes all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (64 commits) vdpa/mlx5: support device features provisioning vdpa/mlx5: make MTU/STATUS presence conditional on feature bits vdpa: validate device feature provisioning against supported class vdpa: validate provisioned device features against specified attribute vdpa: conditionally read STATUS in config space vdpa: fix improper error message when adding vdpa dev vdpa/mlx5: Initialize CVQ iotlb spinlock vdpa/mlx5: Don't clear mr struct on destroy MR vdpa/mlx5: Directly assign memory key tools/virtio: enable to build with retpoline vringh: fix a typo in comments for vringh_kiov vhost-vdpa: print warning when vhost_vdpa_alloc_domain fails scsi: virtio_scsi: fix handling of kmalloc failure vdpa: Fix a couple of spelling mistakes in some messages vhost-net: support VIRTIO_F_RING_RESET vhost-scsi: convert sysfs snprintf and sprintf to sysfs_emit vdpa: mlx5: support per virtqueue dma device vdpa: set dma mask for vDPA device virtio-vdpa: support per vq dma device vdpa: introduce get_vq_dma_device() ... |
||
Linus Torvalds
|
49d5759268 |
ARM:
- Provide a virtual cache topology to the guest to avoid inconsistencies with migration on heterogenous systems. Non secure software has no practical need to traverse the caches by set/way in the first place. - Add support for taking stage-2 access faults in parallel. This was an accidental omission in the original parallel faults implementation, but should provide a marginal improvement to machines w/o FEAT_HAFDBS (such as hardware from the fruit company). - A preamble to adding support for nested virtualization to KVM, including vEL2 register state, rudimentary nested exception handling and masking unsupported features for nested guests. - Fixes to the PSCI relay that avoid an unexpected host SVE trap when resuming a CPU when running pKVM. - VGIC maintenance interrupt support for the AIC - Improvements to the arch timer emulation, primarily aimed at reducing the trap overhead of running nested. - Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the interest of CI systems. - Avoid VM-wide stop-the-world operations when a vCPU accesses its own redistributor. - Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions in the host. - Aesthetic and comment/kerneldoc fixes - Drop the vestiges of the old Columbia mailing list and add [Oliver] as co-maintainer This also drags in arm64's 'for-next/sme2' branch, because both it and the PSCI relay changes touch the EL2 initialization code. RISC-V: - Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE - Correctly place the guest in S-mode after redirecting a trap to the guest - Redirect illegal instruction traps to guest - SBI PMU support for guest s390: - Two patches sorting out confusion between virtual and physical addresses, which currently are the same on s390. - A new ioctl that performs cmpxchg on guest memory - A few fixes x86: - Change tdp_mmu to a read-only parameter - Separate TDP and shadow MMU page fault paths - Enable Hyper-V invariant TSC control - Fix a variety of APICv and AVIC bugs, some of them real-world, some of them affecting architecurally legal but unlikely to happen in practice - Mark APIC timer as expired if its in one-shot mode and the count underflows while the vCPU task was being migrated - Advertise support for Intel's new fast REP string features - Fix a double-shootdown issue in the emergency reboot code - Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give SVM similar treatment to VMX - Update Xen's TSC info CPUID sub-leaves as appropriate - Add support for Hyper-V's extended hypercalls, where "support" at this point is just forwarding the hypercalls to userspace - Clean up the kvm->lock vs. kvm->srcu sequences when updating the PMU and MSR filters - One-off fixes and cleanups - Fix and cleanup the range-based TLB flushing code, used when KVM is running on Hyper-V - Add support for filtering PMU events using a mask. If userspace wants to restrict heavily what events the guest can use, it can now do so without needing an absurd number of filter entries - Clean up KVM's handling of "PMU MSRs to save", especially when vPMU support is disabled - Add PEBS support for Intel Sapphire Rapids - Fix a mostly benign overflow bug in SEV's send|receive_update_data() - Move several SVM-specific flags into vcpu_svm x86 Intel: - Handle NMI VM-Exits before leaving the noinstr region - A few trivial cleanups in the VM-Enter flows - Stop enabling VMFUNC for L1 purely to document that KVM doesn't support EPTP switching (or any other VM function) for L1 - Fix a crash when using eVMCS's enlighted MSR bitmaps Generic: - Clean up the hardware enable and initialization flow, which was scattered around multiple arch-specific hooks. Instead, just let the arch code call into generic code. Both x86 and ARM should benefit from not having to fight common KVM code's notion of how to do initialization. - Account allocations in generic kvm_arch_alloc_vm() - Fix a memory leak if coalesced MMIO unregistration fails selftests: - On x86, cache the CPU vendor (AMD vs. Intel) and use the info to emit the correct hypercall instruction instead of relying on KVM to patch in VMMCALL - Use TAP interface for kvm_binary_stats_test and tsc_msrs_test -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmP2YA0UHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroPg/Qf+J6nT+TkIa+8Ei+fN1oMTDp4YuIOx mXvJ9mRK9sQ+tAUVwvDz3qN/fK5mjsYbRHIDlVc5p2Q3bCrVGDDqXPFfCcLx1u+O 9U9xjkO4JxD2LS9pc70FYOyzVNeJ8VMGOBbC2b0lkdYZ4KnUc6e/WWFKJs96bK+H duo+RIVyaMthnvbTwSv1K3qQb61n6lSJXplywS8KWFK6NZAmBiEFDAWGRYQE9lLs VcVcG0iDJNL/BQJ5InKCcvXVGskcCm9erDszPo7w4Bypa4S9AMS42DHUaRZrBJwV /WqdH7ckIz7+OSV0W1j+bKTHAFVTCjXYOM7wQykgjawjICzMSnnG9Gpskw== =goe1 -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "ARM: - Provide a virtual cache topology to the guest to avoid inconsistencies with migration on heterogenous systems. Non secure software has no practical need to traverse the caches by set/way in the first place - Add support for taking stage-2 access faults in parallel. This was an accidental omission in the original parallel faults implementation, but should provide a marginal improvement to machines w/o FEAT_HAFDBS (such as hardware from the fruit company) - A preamble to adding support for nested virtualization to KVM, including vEL2 register state, rudimentary nested exception handling and masking unsupported features for nested guests - Fixes to the PSCI relay that avoid an unexpected host SVE trap when resuming a CPU when running pKVM - VGIC maintenance interrupt support for the AIC - Improvements to the arch timer emulation, primarily aimed at reducing the trap overhead of running nested - Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the interest of CI systems - Avoid VM-wide stop-the-world operations when a vCPU accesses its own redistributor - Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions in the host - Aesthetic and comment/kerneldoc fixes - Drop the vestiges of the old Columbia mailing list and add [Oliver] as co-maintainer RISC-V: - Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE - Correctly place the guest in S-mode after redirecting a trap to the guest - Redirect illegal instruction traps to guest - SBI PMU support for guest s390: - Sort out confusion between virtual and physical addresses, which currently are the same on s390 - A new ioctl that performs cmpxchg on guest memory - A few fixes x86: - Change tdp_mmu to a read-only parameter - Separate TDP and shadow MMU page fault paths - Enable Hyper-V invariant TSC control - Fix a variety of APICv and AVIC bugs, some of them real-world, some of them affecting architecurally legal but unlikely to happen in practice - Mark APIC timer as expired if its in one-shot mode and the count underflows while the vCPU task was being migrated - Advertise support for Intel's new fast REP string features - Fix a double-shootdown issue in the emergency reboot code - Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give SVM similar treatment to VMX - Update Xen's TSC info CPUID sub-leaves as appropriate - Add support for Hyper-V's extended hypercalls, where "support" at this point is just forwarding the hypercalls to userspace - Clean up the kvm->lock vs. kvm->srcu sequences when updating the PMU and MSR filters - One-off fixes and cleanups - Fix and cleanup the range-based TLB flushing code, used when KVM is running on Hyper-V - Add support for filtering PMU events using a mask. If userspace wants to restrict heavily what events the guest can use, it can now do so without needing an absurd number of filter entries - Clean up KVM's handling of "PMU MSRs to save", especially when vPMU support is disabled - Add PEBS support for Intel Sapphire Rapids - Fix a mostly benign overflow bug in SEV's send|receive_update_data() - Move several SVM-specific flags into vcpu_svm x86 Intel: - Handle NMI VM-Exits before leaving the noinstr region - A few trivial cleanups in the VM-Enter flows - Stop enabling VMFUNC for L1 purely to document that KVM doesn't support EPTP switching (or any other VM function) for L1 - Fix a crash when using eVMCS's enlighted MSR bitmaps Generic: - Clean up the hardware enable and initialization flow, which was scattered around multiple arch-specific hooks. Instead, just let the arch code call into generic code. Both x86 and ARM should benefit from not having to fight common KVM code's notion of how to do initialization - Account allocations in generic kvm_arch_alloc_vm() - Fix a memory leak if coalesced MMIO unregistration fails selftests: - On x86, cache the CPU vendor (AMD vs. Intel) and use the info to emit the correct hypercall instruction instead of relying on KVM to patch in VMMCALL - Use TAP interface for kvm_binary_stats_test and tsc_msrs_test" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits) KVM: SVM: hyper-v: placate modpost section mismatch error KVM: x86/mmu: Make tdp_mmu_allowed static KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes KVM: arm64: nv: Filter out unsupported features from ID regs KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2 KVM: arm64: nv: Allow a sysreg to be hidden from userspace only KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2 KVM: arm64: nv: Handle SMCs taken from virtual EL2 KVM: arm64: nv: Handle trapped ERET from virtual EL2 KVM: arm64: nv: Inject HVC exceptions to the virtual EL2 KVM: arm64: nv: Support virtual EL2 exceptions KVM: arm64: nv: Handle HCR_EL2.NV system register traps KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state KVM: arm64: nv: Add EL2 system registers to vcpu context KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set KVM: arm64: nv: Introduce nested virtualization VCPU feature KVM: arm64: Use the S2 MMU context to iterate over S2 table ... |
||
Linus Torvalds
|
d0a32f5520 |
powerpc updates for 6.3
- Support for configuring secure boot with user-defined keys on PowerVM LPARs. - Simplify the replay of soft-masked IRQs by making it non-recursive. - Add support for KCSAN on 64-bit Book3S. - Improvements to the API & code which interacts with RTAS (pseries firmware). - Change 32-bit powermac to assign PCI bus numbers per domain by default. - Some improvements to the 32-bit BPF JIT. - Various other small features and fixes. Thanks to: Anders Roxell, Andrew Donnellan, Andrew Jeffery, Benjamin Gray, Christophe Leroy, Frederic Barrat, Ganesh Goudar, Geoff Levand, Greg Kroah-Hartman, Jan-Benedict Glaw, Josh Poimboeuf, Kajol Jain, Laurent Dufour, Mahesh Salgaonkar, Mathieu Desnoyers, Mimi Zohar, Murphy Zhou, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nicholas Piggin, Pali Rohár, Petr Mladek, Rohan McLure, Russell Currey, Sachin Sant, Sathvika Vasireddy, Sourabh Jain, Stefan Berger, Stephen Rothwell, Sudhakar Kuppusamy. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmP4GnkTHG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgEnlEAC9UoE9JM853o9ZzpOJDrbYknHsRQad ztQJ9xu5qjkFHHryTmWKYdiAtNDFbcfn7+1aoc5FXrIb6BOfvBo/uRFw6P501Qwv Fg0MQyWUnT5WrI7+rBE2q+1+FaHBNKLycLNRSh5JpXtuKe2ubQfiFD80tarBnEnU 6I4bqXd+xjDtnqtpfiYnil/kdZTu/MzntdkmCne6fMkflgEQFU9EVQEnnE+imqFa 6BuCwITvZ+NyaaU+cYMeGZT7aoz9PAwkksgTxXW2gQbTIApX9WX4kYU/vbW4aHts 0bpzMmIbSbAklYIu2PQQhSU0bLfKJ+xly8E8tozHgRX6hrFlqvtmD/T5LHTBD11f FFzKb0NUCD8qTIy6Hn0M1tj5egLpxxzATPe/kVTkxxqTlZrzdSEaqzft6syyJHJd ueo0QN53AUyBaVMtxLbnB/U/8Vnz6rLqY+8dLKzXhjYjoPJqOZh/Qlc1Tk3syPwf E2j4H6wFqGMTOGi453Pijkpj3qpNkNT79FG5DmClcQLJxD/EXDyffLZITrkzQa0S FEkcMzz/Hn9Hkf7ZuNo4DN6ss6IF0vlxoi7GNr+MRR53/aVQJUDc8z24c4ICl/3w 20ETk57XMVJzP++Hb+yn16JyAawfQOOlckBRZ2O8W5YYVoes45hxDQxVoh8EII69 hb3KOGYEqF5wyA== =ECNb -----END PGP SIGNATURE----- Merge tag 'powerpc-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Support for configuring secure boot with user-defined keys on PowerVM LPARs - Simplify the replay of soft-masked IRQs by making it non-recursive - Add support for KCSAN on 64-bit Book3S - Improvements to the API & code which interacts with RTAS (pseries firmware) - Change 32-bit powermac to assign PCI bus numbers per domain by default - Some improvements to the 32-bit BPF JIT - Various other small features and fixes Thanks to Anders Roxell, Andrew Donnellan, Andrew Jeffery, Benjamin Gray, Christophe Leroy, Frederic Barrat, Ganesh Goudar, Geoff Levand, Greg Kroah-Hartman, Jan-Benedict Glaw, Josh Poimboeuf, Kajol Jain, Laurent Dufour, Mahesh Salgaonkar, Mathieu Desnoyers, Mimi Zohar, Murphy Zhou, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nicholas Piggin, Pali Rohár, Petr Mladek, Rohan McLure, Russell Currey, Sachin Sant, Sathvika Vasireddy, Sourabh Jain, Stefan Berger, Stephen Rothwell, and Sudhakar Kuppusamy. * tag 'powerpc-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (114 commits) powerpc/pseries: Avoid hcall in plpks_is_available() on non-pseries powerpc: dts: turris1x.dts: Set lower priority for CPLD syscon-reboot powerpc/e500: Add missing prototype for 'relocate_init' powerpc/64: Fix unannotated intra-function call warning powerpc/epapr: Don't use wrteei on non booke powerpc: Pass correct CPU reference to assembler powerpc/mm: Rearrange if-else block to avoid clang warning powerpc/nohash: Fix build with llvm-as powerpc/nohash: Fix build error with binutils >= 2.38 powerpc/pseries: Fix endianness issue when parsing PLPKS secvar flags macintosh: windfarm: Use unsigned type for 1-bit bitfields powerpc/kexec_file: print error string on usable memory property update failure powerpc/machdep: warn when machine_is() used too early powerpc/64: Replace -mcpu=e500mc64 by -mcpu=e5500 powerpc/eeh: Set channel state after notifying the drivers selftests/powerpc: Fix incorrect kernel headers search path powerpc/rtas: arch-wide function token lookup conversions powerpc/rtas: introduce rtas_function_token() API powerpc/pseries/lpar: convert to papr_sysparm API powerpc/pseries/hv-24x7: convert to papr_sysparm API ... |
||
Linus Torvalds
|
7c3dc440b1 |
cxl for v6.3
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects for platform firmware created memory regions - CXL RAM region provisioning: complement the existing PMEM region creation support with RAM region support - "Soft Reservation" policy change: Online (memory hot-add) soft-reserved memory (EFI_MEMORY_SP) by default, but still allow for setting aside such memory for dedicated access via device-dax. - CXL Events and Interrupts: Takeover CXL event handling from platform-firmware (ACPI calls this CXL Memory Error Reporting) and export CXL Events via Linux Trace Events. - Convey CXL _OSC results to drivers: Similar to PCI, let the CXL subsystem interrogate the result of CXL _OSC negotiation. - Emulate CXL DVSEC Range Registers as "decoders": Allow for first-generation devices that pre-date the definition of the CXL HDM Decoder Capability to translate the CXL DVSEC Range Registers into 'struct cxl_decoder' objects. - Set timestamp: Per spec, set the device timestamp in case of hotplug, or if platform-firwmare failed to set it. - General fixups: linux-next build issues, non-urgent fixes for pre-production hardware, unit test fixes, spelling and debug message improvements. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY/WYcgAKCRDfioYZHlFs Z6m3APkBUtiEEm1o8ikdu5llUS1OTLBwqjJDwGMTyf8X/WDXhgD+J2mLsCgARS7X 5IS0RAtefutrW5sQpUucPM7QiLuraAY= =kOXC -----END PGP SIGNATURE----- Merge tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull Compute Express Link (CXL) updates from Dan Williams: "To date Linux has been dependent on platform-firmware to map CXL RAM regions and handle events / errors from devices. With this update we can now parse / update the CXL memory layout, and report events / errors from devices. This is a precursor for the CXL subsystem to handle the end-to-end "RAS" flow for CXL memory. i.e. the flow that for DDR-attached-DRAM is handled by the EDAC driver where it maps system physical address events to a field-replaceable-unit (FRU / endpoint device). In general, CXL has the potential to standardize what has historically been a pile of memory-controller-specific error handling logic. Another change of note is the default policy for handling RAM-backed device-dax instances. Previously the default access mode was "device", mmap(2) a device special file to access memory. The new default is "kmem" where the address range is assigned to the core-mm via add_memory_driver_managed(). This saves typical users from wondering why their platform memory is not visible via free(1) and stuck behind a device-file. At the same time it allows expert users to deploy policy to, for example, get dedicated access to high performance memory, or hide low performance memory from general purpose kernel allocations. This affects not only CXL, but also systems with high-bandwidth-memory that platform-firmware tags with the EFI_MEMORY_SP (special purpose) designation. Summary: - CXL RAM region enumeration: instantiate 'struct cxl_region' objects for platform firmware created memory regions - CXL RAM region provisioning: complement the existing PMEM region creation support with RAM region support - "Soft Reservation" policy change: Online (memory hot-add) soft-reserved memory (EFI_MEMORY_SP) by default, but still allow for setting aside such memory for dedicated access via device-dax. - CXL Events and Interrupts: Takeover CXL event handling from platform-firmware (ACPI calls this CXL Memory Error Reporting) and export CXL Events via Linux Trace Events. - Convey CXL _OSC results to drivers: Similar to PCI, let the CXL subsystem interrogate the result of CXL _OSC negotiation. - Emulate CXL DVSEC Range Registers as "decoders": Allow for first-generation devices that pre-date the definition of the CXL HDM Decoder Capability to translate the CXL DVSEC Range Registers into 'struct cxl_decoder' objects. - Set timestamp: Per spec, set the device timestamp in case of hotplug, or if platform-firwmare failed to set it. - General fixups: linux-next build issues, non-urgent fixes for pre-production hardware, unit test fixes, spelling and debug message improvements" * tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (66 commits) dax/kmem: Fix leak of memory-hotplug resources cxl/mem: Add kdoc param for event log driver state cxl/trace: Add serial number to trace points cxl/trace: Add host output to trace points cxl/trace: Standardize device information output cxl/pci: Remove locked check for dvsec_range_allowed() cxl/hdm: Add emulation when HDM decoders are not committed cxl/hdm: Create emulated cxl_hdm for devices that do not have HDM decoders cxl/hdm: Emulate HDM decoder from DVSEC range registers cxl/pci: Refactor cxl_hdm_decode_init() cxl/port: Export cxl_dvsec_rr_decode() to cxl_port cxl/pci: Break out range register decoding from cxl_hdm_decode_init() cxl: add RAS status unmasking for CXL cxl: remove unnecessary calling of pci_enable_pcie_error_reporting() dax/hmem: build hmem device support as module if possible dax: cxl: add CXL_REGION dependency cxl: avoid returning uninitialized error code cxl/pmem: Fix nvdimm registration races cxl/mem: Fix UAPI command comment cxl/uapi: Tag commands from cxl_query_cmd() ... |
||
Hangbin Liu
|
02d6a057c7 |
selftests/bpf: run mptcp in a dedicated netns
The current mptcp test is run in init netns. If the user or default system config disabled mptcp, the test will fail. Let's run the mptcp test in a dedicated netns to avoid none kernel default mptcp setting. Suggested-by: Martin KaFai Lau <martin.lau@linux.dev> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230224061343.506571-3-liuhangbin@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> |
||
Hangbin Liu
|
b61987d37c |
selftests/bpf: move SYS() macro into the test_progs.h
A lot of tests defined SYS() macro to run system calls with goto label. Let's move this macro to test_progs.h and add configurable "goto_label" as the first arg. Suggested-by: Martin KaFai Lau <martin.lau@linux.dev> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20230224061343.506571-2-liuhangbin@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> |
||
Linus Torvalds
|
143c7bc649 |
iommufd for 6.3
Some polishing and small fixes for iommufd: - Remove IOMMU_CAP_INTR_REMAP, instead rely on the interrupt subsystem - Use GFP_KERNEL_ACCOUNT inside the iommu_domains - Support VFIO_NOIOMMU mode with iommufd - Various typos - A list corruption bug if HWPTs are used for attach -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCY/TgzQAKCRCFwuHvBreF Ya3AAP4/WxTJIbDvtTyH3Fae3NxTdO8j8gsUvU1vrRYG83zdnAEAxd1yii7GEO8D crkeq9D4FUiPAkFnJ64Exw2FHb060Qg= =RABK -----END PGP SIGNATURE----- Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd Pull iommufd updates from Jason Gunthorpe: "Some polishing and small fixes for iommufd: - Remove IOMMU_CAP_INTR_REMAP, instead rely on the interrupt subsystem - Use GFP_KERNEL_ACCOUNT inside the iommu_domains - Support VFIO_NOIOMMU mode with iommufd - Various typos - A list corruption bug if HWPTs are used for attach" * tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: iommufd: Do not add the same hwpt to the ioas->hwpt_list twice iommufd: Make sure to zero vfio_iommu_type1_info before copying to user vfio: Support VFIO_NOIOMMU with iommufd iommufd: Add three missing structures in ucmd_buffer selftests: iommu: Fix test_cmd_destroy_access() call in user_copy iommu: Remove IOMMU_CAP_INTR_REMAP irq/s390: Add arch_is_isolated_msi() for s390 iommu/x86: Replace IOMMU_CAP_INTR_REMAP with IRQ_DOMAIN_FLAG_ISOLATED_MSI genirq/msi: Rename IRQ_DOMAIN_MSI_REMAP to IRQ_DOMAIN_ISOLATED_MSI genirq/irqdomain: Remove unused irq_domain_check_msi_remap() code iommufd: Convert to msi_device_has_isolated_msi() vfio/type1: Convert to iommu_group_has_isolated_msi() iommu: Add iommu_group_has_isolated_msi() genirq/msi: Add msi_device_has_isolated_msi() |
||
Linus Torvalds
|
693fed981e |
Char/Misc and other driver subsystem changes for 6.3-rc1
Here is the large set of driver changes for char/misc drivers and other smaller driver subsystems that flow through this git tree. Included in here are: - New IIO drivers and features and improvments in that subsystem - New hwtracing drivers and additions to that subsystem - lots of interconnect changes and new drivers as that subsystem seems under very active development recently. This required also merging in the icc subsystem changes through this tree. - FPGA driver updates - counter subsystem and driver updates - MHI driver updates - nvmem driver updates - documentation updates - Other smaller driver updates and fixes, full details in the shortlog All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/inQw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yksvwCeOvU//SPwrbIpaeHAmHUv0PSVOrwAoKmt4ICh hQUudlztfkvUJxKIH0gh =Sjk4 -----END PGP SIGNATURE----- Merge tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver subsystem updates from Greg KH: "Here is the large set of driver changes for char/misc drivers and other smaller driver subsystems that flow through this git tree. Included in here are: - New IIO drivers and features and improvments in that subsystem - New hwtracing drivers and additions to that subsystem - lots of interconnect changes and new drivers as that subsystem seems under very active development recently. This required also merging in the icc subsystem changes through this tree. - FPGA driver updates - counter subsystem and driver updates - MHI driver updates - nvmem driver updates - documentation updates - Other smaller driver updates and fixes, full details in the shortlog All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits) scripts/tags.sh: fix incompatibility with PCRE2 firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries mei: lower the log level for non-fatal failed messages mei: bus: disallow driver match while dismantling device misc: vmw_balloon: fix memory leak with using debugfs_lookup() nvmem: stm32: fix OPTEE dependency dt-bindings: nvmem: qfprom: add IPQ8074 compatible nvmem: qcom-spmi-sdam: register at device init time nvmem: rave-sp-eeprm: fix kernel-doc bad line warning nvmem: stm32: detect bsec pta presence for STM32MP15x nvmem: stm32: add OP-TEE support for STM32MP13x nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of() nvmem: core: add nvmem_add_one_cell() nvmem: core: drop the removal of the cells in nvmem_add_cells() nvmem: core: move struct nvmem_cell_info to nvmem-provider.h nvmem: core: add an index parameter to the cell of: property: add #nvmem-cell-cells property of: property: make #.*-cells optional for simple props of: base: add of_parse_phandle_with_optional_args() net: add helper eth_addr_add() ... |
||
Jakub Kicinski
|
d77e7eceea |
tools: net: add __pycache__ to gitignore
Python will generate its customary cache when running ynl scripts: ?? tools/net/ynl/lib/__pycache__/ Reported-by: Chuck Lever III <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Jakub Kicinski
|
b9d3a3e4ae |
tools: ynl-gen: re-raise the exception instead of printing
traceback.print_exception() seems tricky to call, we're missing
some argument, so re-raise instead.
Reported-by: Chuck Lever III <chuck.lever@oracle.com>
Fixes:
|
||
Jakub Kicinski
|
f7cf644796 |
tools: ynl-gen: fix single attribute structs with attr 0 only
Chuck run into an issue with a single-element attr-set which
only has an attr with value of 0. The search for max attr in
a struct records attrs with value larger than 0 only (max_val
is set to 0 at the start). Adjust the comparison, alternatively
max_val could be init'ed to -1. Somehow picking the last attr
of a value seems like a good idea in general.
Reported-by: Chuck Lever III <chuck.lever@oracle.com>
Fixes:
|
||
Tariq Toukan
|
1862de92c8 |
netdev-genl: fix repeated typo oflloading -> offloading
Fix a repeated copy/paste typo.
Fixes:
|
||
Linus Torvalds
|
3822a7c409 |
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at memfd creation time, with the option of sealing the state of the X bit. - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset() thread-safe for pmd unshare") which addresses a rare race condition related to PMD unsharing. - Several folioification patch serieses from Matthew Wilcox, Vishal Moola, Sidhartha Kumar and Lorenzo Stoakes - Johannes Weiner has a series ("mm: push down lock_page_memcg()") which does perform some memcg maintenance and cleanup work. - SeongJae Park has added DAMOS filtering to DAMON, with the series "mm/damon/core: implement damos filter". These filters provide users with finer-grained control over DAMOS's actions. SeongJae has also done some DAMON cleanup work. - Kairui Song adds a series ("Clean up and fixes for swap"). - Vernon Yang contributed the series "Clean up and refinement for maple tree". - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It adds to MGLRU an LRU of memcgs, to improve the scalability of global reclaim. - David Hildenbrand has added some userfaultfd cleanup work in the series "mm: uffd-wp + change_protection() cleanups". - Christoph Hellwig has removed the generic_writepages() library function in the series "remove generic_writepages". - Baolin Wang has performed some maintenance on the compaction code in his series "Some small improvements for compaction". - Sidhartha Kumar is doing some maintenance work on struct page in his series "Get rid of tail page fields". - David Hildenbrand contributed some cleanup, bugfixing and generalization of pte management and of pte debugging in his series "mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap PTEs". - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation flag in the series "Discard __GFP_ATOMIC". - Sergey Senozhatsky has improved zsmalloc's memory utilization with his series "zsmalloc: make zspage chain size configurable". - Joey Gouly has added prctl() support for prohibiting the creation of writeable+executable mappings. The previous BPF-based approach had shortcomings. See "mm: In-kernel support for memory-deny-write-execute (MDWE)". - Waiman Long did some kmemleak cleanup and bugfixing in the series "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF". - T.J. Alumbaugh has contributed some MGLRU cleanup work in his series "mm: multi-gen LRU: improve". - Jiaqi Yan has provided some enhancements to our memory error statistics reporting, mainly by presenting the statistics on a per-node basis. See the series "Introduce per NUMA node memory error statistics". - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog regression in compaction via his series "Fix excessive CPU usage during compaction". - Christoph Hellwig does some vmalloc maintenance work in the series "cleanup vfree and vunmap". - Christoph Hellwig has removed block_device_operations.rw_page() in ths series "remove ->rw_page". - We get some maple_tree improvements and cleanups in Liam Howlett's series "VMA tree type safety and remove __vma_adjust()". - Suren Baghdasaryan has done some work on the maintainability of our vm_flags handling in the series "introduce vm_flags modifier functions". - Some pagemap cleanup and generalization work in Mike Rapoport's series "mm, arch: add generic implementation of pfn_valid() for FLATMEM" and "fixups for generic implementation of pfn_valid()" - Baoquan He has done some work to make /proc/vmallocinfo and /proc/kcore better represent the real state of things in his series "mm/vmalloc.c: allow vread() to read out vm_map_ram areas". - Jason Gunthorpe rationalized the GUP system's interface to the rest of the kernel in the series "Simplify the external interface for GUP". - SeongJae Park wishes to migrate people from DAMON's debugfs interface over to its sysfs interface. To support this, we'll temporarily be printing warnings when people use the debugfs interface. See the series "mm/damon: deprecate DAMON debugfs interface". - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes and clean-ups" series. - Huang Ying has provided a dramatic reduction in migration's TLB flush IPI rates with the series "migrate_pages(): batch TLB flushing". - Arnd Bergmann has some objtool fixups in "objtool warning fixes". -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K DmxHkn0LAitGgJRS/W9w81yrgig9tAQ= =MlGs -----END PGP SIGNATURE----- Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Daniel Verkamp has contributed a memfd series ("mm/memfd: add F_SEAL_EXEC") which permits the setting of the memfd execute bit at memfd creation time, with the option of sealing the state of the X bit. - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset() thread-safe for pmd unshare") which addresses a rare race condition related to PMD unsharing. - Several folioification patch serieses from Matthew Wilcox, Vishal Moola, Sidhartha Kumar and Lorenzo Stoakes - Johannes Weiner has a series ("mm: push down lock_page_memcg()") which does perform some memcg maintenance and cleanup work. - SeongJae Park has added DAMOS filtering to DAMON, with the series "mm/damon/core: implement damos filter". These filters provide users with finer-grained control over DAMOS's actions. SeongJae has also done some DAMON cleanup work. - Kairui Song adds a series ("Clean up and fixes for swap"). - Vernon Yang contributed the series "Clean up and refinement for maple tree". - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It adds to MGLRU an LRU of memcgs, to improve the scalability of global reclaim. - David Hildenbrand has added some userfaultfd cleanup work in the series "mm: uffd-wp + change_protection() cleanups". - Christoph Hellwig has removed the generic_writepages() library function in the series "remove generic_writepages". - Baolin Wang has performed some maintenance on the compaction code in his series "Some small improvements for compaction". - Sidhartha Kumar is doing some maintenance work on struct page in his series "Get rid of tail page fields". - David Hildenbrand contributed some cleanup, bugfixing and generalization of pte management and of pte debugging in his series "mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap PTEs". - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation flag in the series "Discard __GFP_ATOMIC". - Sergey Senozhatsky has improved zsmalloc's memory utilization with his series "zsmalloc: make zspage chain size configurable". - Joey Gouly has added prctl() support for prohibiting the creation of writeable+executable mappings. The previous BPF-based approach had shortcomings. See "mm: In-kernel support for memory-deny-write-execute (MDWE)". - Waiman Long did some kmemleak cleanup and bugfixing in the series "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF". - T.J. Alumbaugh has contributed some MGLRU cleanup work in his series "mm: multi-gen LRU: improve". - Jiaqi Yan has provided some enhancements to our memory error statistics reporting, mainly by presenting the statistics on a per-node basis. See the series "Introduce per NUMA node memory error statistics". - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog regression in compaction via his series "Fix excessive CPU usage during compaction". - Christoph Hellwig does some vmalloc maintenance work in the series "cleanup vfree and vunmap". - Christoph Hellwig has removed block_device_operations.rw_page() in ths series "remove ->rw_page". - We get some maple_tree improvements and cleanups in Liam Howlett's series "VMA tree type safety and remove __vma_adjust()". - Suren Baghdasaryan has done some work on the maintainability of our vm_flags handling in the series "introduce vm_flags modifier functions". - Some pagemap cleanup and generalization work in Mike Rapoport's series "mm, arch: add generic implementation of pfn_valid() for FLATMEM" and "fixups for generic implementation of pfn_valid()" - Baoquan He has done some work to make /proc/vmallocinfo and /proc/kcore better represent the real state of things in his series "mm/vmalloc.c: allow vread() to read out vm_map_ram areas". - Jason Gunthorpe rationalized the GUP system's interface to the rest of the kernel in the series "Simplify the external interface for GUP". - SeongJae Park wishes to migrate people from DAMON's debugfs interface over to its sysfs interface. To support this, we'll temporarily be printing warnings when people use the debugfs interface. See the series "mm/damon: deprecate DAMON debugfs interface". - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes and clean-ups" series. - Huang Ying has provided a dramatic reduction in migration's TLB flush IPI rates with the series "migrate_pages(): batch TLB flushing". - Arnd Bergmann has some objtool fixups in "objtool warning fixes". * tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits) include/linux/migrate.h: remove unneeded externs mm/memory_hotplug: cleanup return value handing in do_migrate_range() mm/uffd: fix comment in handling pte markers mm: change to return bool for isolate_movable_page() mm: hugetlb: change to return bool for isolate_hugetlb() mm: change to return bool for isolate_lru_page() mm: change to return bool for folio_isolate_lru() objtool: add UACCESS exceptions for __tsan_volatile_read/write kmsan: disable ftrace in kmsan core code kasan: mark addr_has_metadata __always_inline mm: memcontrol: rename memcg_kmem_enabled() sh: initialize max_mapnr m68k/nommu: add missing definition of ARCH_PFN_OFFSET mm: percpu: fix incorrect size in pcpu_obj_full_size() maple_tree: reduce stack usage with gcc-9 and earlier mm: page_alloc: call panic() when memoryless node allocation fails mm: multi-gen LRU: avoid futile retries migrate_pages: move THP/hugetlb migration support check to simplify code migrate_pages: batch flushing TLB migrate_pages: share more code between _unmap and _move ... |
||
Linus Torvalds
|
f2b98d0af2 |
bootconfig for v6.3:
- Fix ftrace2bconf.sh tool for checking event enable status correctly. - Add CONFIG_BOOT_CONFIG_FORCE to apply bootconfig without 'bootconfig' boot parameter. - Enable CONFIG_BOOT_CONFIG_FORCE by default if a bootconfig is embedded in the kernel. - Increase max number of nodes of bootconfig to 8192. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmP1VUUACgkQ2/sHvwUr PxuExQgAslUeGrdn8nAA2qsModVHrXwLl1Xa6797Xzh/xCoIOAQ5AaUkGOlBBpCi 0UGsiqo5pLfrJ7q1HCTiD4kNpDcK6Kw9UbjClMS2nSf58hK98upUAng+4VlTH3dZ difzua1Y0PohBDsLZpV5Ex/K9ZHiPhm44pqkaA+q0gHBfa5AmFuRUD3icEdiHmFu B3GX0qdIMeFmUhxt0jmfvsu1Xq8fjF3Lsz/xCeOHcNJYyxzmdttxHYY8pLTWOIoL xGL2MmwIYzLRW3/r9E71JNCLgykUWZSBbYhcJ7lIAJadFNbNBFJ0+v5uiyxbZEib Xv5UAyTKSIeZIyH0fUZ/4Ufa8sw5Nw== =0Nnb -----END PGP SIGNATURE----- Merge tag 'bootconfig-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull bootconfig updates from Masami Hiramatsu: - Fix ftrace2bconf.sh tool for checking event enable status correctly - Add CONFIG_BOOT_CONFIG_FORCE to apply bootconfig without 'bootconfig' boot parameter - Enable CONFIG_BOOT_CONFIG_FORCE by default if a bootconfig is embedded in the kernel - Increase max number of nodes of bootconfig to 8192 * tag 'bootconfig-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC support bootconfig: Default BOOT_CONFIG_FORCE to y if BOOT_CONFIG_EMBED Allow forcing unconditional bootconfig processing tools/bootconfig: fix single & used for logical condition |
||
Linus Torvalds
|
2b79eb73e2 |
probes updates for 6.3:
- Skip negative return code check for snprintf in eprobe. - Add recursive call test cases for kprobe unit test - Add 'char' type to probe events to show it as the character instead of value. - Update kselftest kprobe-event testcase to ignore '__pfx_' symbols. - Fix kselftest to check filter on eprobe event correctly. - Add filter on eprobe to the README file in tracefs. - Fix optprobes to check whether there is 'under unoptimizing' optprobe when optimizing another kprobe correctly. - Fix optprobe to check whether there is 'under unoptimizing' optprobe when fetching the original instruction correctly. - Fix optprobe to free 'forcibly unoptimized' optprobe correctly. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmP0JdYACgkQ2/sHvwUr Pxt6sQf/TD9Kwqx3XG1tnLPev6yt2nuggUippHwWUFHlJtMyUaLV8aKFqByyEe+j tCQvrFIIJq242xg0Jac/MAf2exlWG9jsmVZPmvC1YzepOAbjXu2eBkIS7LsbeHjF JJypNnEceffWCpNoD6nlvR0xWXenqRbZJwdsGqo3u+fXnzTurEMY2GU2xOyv39tv S1uNLPANJxdMb/2iUsUE3hMbe82dqr8zPcApqWFtTBB6QPHI3B2SjuQHpQxwbTPl bzAl0yQkLSQXprVzT7xJ4xLnzbl1ljgJBci5aX8BFF+VD9oYkypdfYVczBH5VsP9 E3eT9T9lRf4Q99EqxNy5uw7NqQXGQg== =CMPb -----END PGP SIGNATURE----- Merge tag 'probes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull kprobes updates from Masami Hiramatsu: - Skip negative return code check for snprintf in eprobe - Add recursive call test cases for kprobe unit test - Add 'char' type to probe events to show it as the character instead of value - Update kselftest kprobe-event testcase to ignore '__pfx_' symbols - Fix kselftest to check filter on eprobe event correctly - Add filter on eprobe to the README file in tracefs - Fix optprobes to check whether there is 'under unoptimizing' optprobe when optimizing another kprobe correctly - Fix optprobe to check whether there is 'under unoptimizing' optprobe when fetching the original instruction correctly - Fix optprobe to free 'forcibly unoptimized' optprobe correctly * tag 'probes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/eprobe: no need to check for negative ret value for snprintf test_kprobes: Add recursed kprobe test case tracing/probe: add a char type to show the character value of traced arguments selftests/ftrace: Fix probepoint testcase to ignore __pfx_* symbols selftests/ftrace: Fix eprobe syntax test case to check filter support tracing/eprobe: Fix to add filter on eprobe description in README file x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe range x86/kprobes: Fix __recover_optprobed_insn check optimizing logic kprobes: Fix to handle forcibly unoptimized kprobes on freeing_list |
||
Linus Torvalds
|
0df82189bc |
perf tools changes for v6.3:
- 'perf lock contention' improvements: - Add -o/--lock-owner option: $ sudo ./perf lock contention -abo -- ./perf bench sched pipe # Running 'sched/pipe' benchmark: # Executed 1000000 pipe operations between two processes Total time: 4.766 [sec] 4.766540 usecs/op 209795 ops/sec contended total wait max wait avg wait pid owner 403 565.32 us 26.81 us 1.40 us -1 Unknown 4 27.99 us 8.57 us 7.00 us 1583145 sched-pipe 1 8.25 us 8.25 us 8.25 us 1583144 sched-pipe 1 2.03 us 2.03 us 2.03 us 5068 chrome The owner is unknown in most cases. Filtering only for the mutex locks, it will more likely get the owners. - -S/--callstack-filter is to limit display entries having the given string in the callstack $ sudo ./perf lock contention -abv -S net sleep 1 ... contended total wait max wait avg wait type caller 5 70.20 us 16.13 us 14.04 us spinlock __dev_queue_xmit+0xb6d 0xffffffffa5dd1c60 _raw_spin_lock+0x30 0xffffffffa5b8f6ed __dev_queue_xmit+0xb6d 0xffffffffa5cd8267 ip6_finish_output2+0x2c7 0xffffffffa5cdac14 ip6_finish_output+0x1d4 0xffffffffa5cdb477 ip6_xmit+0x457 0xffffffffa5d1fd17 inet6_csk_xmit+0xd7 0xffffffffa5c5f4aa __tcp_transmit_skb+0x54a 0xffffffffa5c6467d tcp_keepalive_timer+0x2fd Please note that to have the -b option (BPF) working above one has to build with BUILD_BPF_SKEL=1. - Add more 'perf test' entries to test these new features. - Add Ian Rogers to MAINTAINERS as a perf tools reviewer. - Add support for retire latency feature (pipeline stall of a instruction compared to the previous one, in cycles) present on some Intel processors. - Add 'perf c2c' report option to show false sharing with adjacent cachelines, to be used in machines with cacheline prefetching, where accesses to a cacheline brings the next one too. - Skip 'perf test bpf' when the required kernel-debuginfo package isn't installed. perf script: - Add 'cgroup' field for 'perf script' output: $ perf record --all-cgroups -- true $ perf script -F comm,pid,cgroup true 337112 /user.slice/user-657345.slice/user@657345.service/... true 337112 /user.slice/user-657345.slice/user@657345.service/... true 337112 /user.slice/user-657345.slice/user@657345.service/... true 337112 /user.slice/user-657345.slice/user@657345.service/... - Add support for showing branch speculation information in 'perf script' and in the 'perf report' raw dump (-D). perf record: - Fix 'perf record' segfault with --overwrite and --max-size. Intel PT: - Add support for synthesizing "cycle" events from Intel PT traces as we support "instruction" events when Intel PT CYC packets are available. This enables much more accurate profiles than when using the regular 'perf record -e cycles' (the default) when the workload lasts for very short periods (<10ms). - .plt symbol handling improvements, better handling IBT (in the past MPX) done in the context of decoding Intel PT processor traces, IFUNC symbols on x86_64, static executables, understanding .plt.got symbols on x86_64. - Add a 'perf test' to test symbol resolution, part of the .plt improvements series, this tests things like symbol size in contexts where only the symbol start is available (kallsyms), etc. - Better handle auxtrace/Intel PT data when using pipe mode (perf record sleep 1|perf report). - Fix symbol lookup with kcore with multiple segments match stext, getting the symbol resolution to just show DSOs as unknown. ARM: - Timestamp improvements for ARM64 systems with ETMv4 (Embedded Trace Macrocell v4). - Ensure ARM64 CoreSight timestamps don't go backwards. - Document that ARM64 SPE (Statistical Profiling Extension) is used with 'perf c2c/mem'. - Add raw decoding for ARM64 SPEv1.2 previous branch address. - Update neoverse-n2-v2 ARM vendor events (JSON tables): topdown L1, TLB, cache, branch, PE utilization and instruction mix metrics. - Update decoder code for OpenCSD version 1.4, on ARM64 systems. - Fix command line auto-complete of CPU events on aarch64. perf test/bench: - Switch basic BPF filtering test to use syscall tracepoint to avoid the variable number of probes inserted when using the previous probe point (do_epoll_wait) that happens on different CPU architectures. - Fix DWARF unwind test by adding non-inline to expected function in a backtrace. - Use 'grep -c' where the longer form 'grep | wc -l' was being used. - Add getpid and execve benchmarks to 'perf bench syscall'. Miscellaneous: - Avoid d3-flame-graph package dependency in 'perf script flamegraph', making this feature more generally available. - Add JSON metric events to present CPI stall cycles in Power10. - Assorted improvements/refactorings on the JSON metrics parsing code. Build: - Fix 'perf probe' and 'perf test' when libtraceevent isn't linked, as several tests use tracepoints, those should be skipped. - More fallout fixes for the removal of tools/lib/traceevent/. - Fix build error when linking with libpfm. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCY/YzGgAKCRCyPKLppCJ+ J98CAP4/GD3E86Dk+S+w5FmPEHuBKootuZ3pHOqCnXLiyKFZqgEAs9TWOg9KVKGh io9cLluMjzfRwQrND8cpn3VfXxWvVAQ= =L1qh -----END PGP SIGNATURE----- Merge tag 'perf-tools-for-v6.3-1-2023-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools updates from Arnaldo Carvalho de Melo: "Miscellaneous: - Add Ian Rogers to MAINTAINERS as a perf tools reviewer. - Add support for retire latency feature (pipeline stall of a instruction compared to the previous one, in cycles) present on some Intel processors. - Add 'perf c2c' report option to show false sharing with adjacent cachelines, to be used in machines with cacheline prefetching, where accesses to a cacheline brings the next one too. - Skip 'perf test bpf' when the required kernel-debuginfo package isn't installed. - Avoid d3-flame-graph package dependency in 'perf script flamegraph', making this feature more generally available. - Add JSON metric events to present CPI stall cycles in Power10. - Assorted improvements/refactorings on the JSON metrics parsing code. perf lock contention: - Add -o/--lock-owner option: $ sudo ./perf lock contention -abo -- ./perf bench sched pipe # Running 'sched/pipe' benchmark: # Executed 1000000 pipe operations between two processes Total time: 4.766 [sec] 4.766540 usecs/op 209795 ops/sec contended total wait max wait avg wait pid owner 403 565.32 us 26.81 us 1.40 us -1 Unknown 4 27.99 us 8.57 us 7.00 us 1583145 sched-pipe 1 8.25 us 8.25 us 8.25 us 1583144 sched-pipe 1 2.03 us 2.03 us 2.03 us 5068 chrome The owner is unknown in most cases. Filtering only for the mutex locks, it will more likely get the owners. - -S/--callstack-filter is to limit display entries having the given string in the callstack: $ sudo ./perf lock contention -abv -S net sleep 1 ... contended total wait max wait avg wait type caller 5 70.20 us 16.13 us 14.04 us spinlock __dev_queue_xmit+0xb6d 0xffffffffa5dd1c60 _raw_spin_lock+0x30 0xffffffffa5b8f6ed __dev_queue_xmit+0xb6d 0xffffffffa5cd8267 ip6_finish_output2+0x2c7 0xffffffffa5cdac14 ip6_finish_output+0x1d4 0xffffffffa5cdb477 ip6_xmit+0x457 0xffffffffa5d1fd17 inet6_csk_xmit+0xd7 0xffffffffa5c5f4aa __tcp_transmit_skb+0x54a 0xffffffffa5c6467d tcp_keepalive_timer+0x2fd Please note that to have the -b option (BPF) working above one has to build with BUILD_BPF_SKEL=1. - Add more 'perf test' entries to test these new features. perf script: - Add 'cgroup' field for 'perf script' output: $ perf record --all-cgroups -- true $ perf script -F comm,pid,cgroup true 337112 /user.slice/user-657345.slice/user@657345.service/... true 337112 /user.slice/user-657345.slice/user@657345.service/... true 337112 /user.slice/user-657345.slice/user@657345.service/... true 337112 /user.slice/user-657345.slice/user@657345.service/... - Add support for showing branch speculation information in 'perf script' and in the 'perf report' raw dump (-D). perf record: - Fix 'perf record' segfault with --overwrite and --max-size. perf test/bench: - Switch basic BPF filtering test to use syscall tracepoint to avoid the variable number of probes inserted when using the previous probe point (do_epoll_wait) that happens on different CPU architectures. - Fix DWARF unwind test by adding non-inline to expected function in a backtrace. - Use 'grep -c' where the longer form 'grep | wc -l' was being used. - Add getpid and execve benchmarks to 'perf bench syscall'. Intel PT: - Add support for synthesizing "cycle" events from Intel PT traces as we support "instruction" events when Intel PT CYC packets are available. This enables much more accurate profiles than when using the regular 'perf record -e cycles' (the default) when the workload lasts for very short periods (<10ms). - .plt symbol handling improvements, better handling IBT (in the past MPX) done in the context of decoding Intel PT processor traces, IFUNC symbols on x86_64, static executables, understanding .plt.got symbols on x86_64. - Add a 'perf test' to test symbol resolution, part of the .plt improvements series, this tests things like symbol size in contexts where only the symbol start is available (kallsyms), etc. - Better handle auxtrace/Intel PT data when using pipe mode (perf record sleep 1|perf report). - Fix symbol lookup with kcore with multiple segments match stext, getting the symbol resolution to just show DSOs as unknown. ARM: - Timestamp improvements for ARM64 systems with ETMv4 (Embedded Trace Macrocell v4). - Ensure ARM64 CoreSight timestamps don't go backwards. - Document that ARM64 SPE (Statistical Profiling Extension) is used with 'perf c2c/mem'. - Add raw decoding for ARM64 SPEv1.2 previous branch address. - Update neoverse-n2-v2 ARM vendor events (JSON tables): topdown L1, TLB, cache, branch, PE utilization and instruction mix metrics. - Update decoder code for OpenCSD version 1.4, on ARM64 systems. - Fix command line auto-complete of CPU events on aarch64. Build: - Fix 'perf probe' and 'perf test' when libtraceevent isn't linked, as several tests use tracepoints, those should be skipped. - More fallout fixes for the removal of tools/lib/traceevent/. - Fix build error when linking with libpfm" * tag 'perf-tools-for-v6.3-1-2023-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (114 commits) perf tests stat_all_metrics: Change true workload to sleep workload for system wide check perf vendor events power10: Add JSON metric events to present CPI stall cycles in powerpc perf intel-pt: Synthesize cycle events perf c2c: Add report option to show false sharing in adjacent cachelines perf record: Fix segfault with --overwrite and --max-size perf stat: Avoid merging/aggregating metric counts twice perf tools: Fix perf tool build error in util/pfm.c perf tools: Fix auto-complete on aarch64 perf lock contention: Support old rw_semaphore type perf lock contention: Add -o/--lock-owner option perf lock contention: Fix to save callstack for the default modified perf test bpf: Skip test if kernel-debuginfo is not present perf probe: Update the exit error codes in function try_to_find_probe_trace_event perf script: Fix missing Retire Latency fields option documentation perf event x86: Add retire_lat when synthesizing PERF_SAMPLE_WEIGHT_STRUCT perf test x86: Support the retire_lat (Retire Latency) sample_type check perf test bpf: Check for libtraceevent support perf script: Support Retire Latency perf report: Support Retire Latency perf lock contention: Support filters for different aggregation ... |
||
Linus Torvalds
|
b72b5fecc1 |
tracing updates for 6.3:
- Add function names as a way to filter function addresses - Add sample module to test ftrace ops and dynamic trampolines - Allow stack traces to be passed from beginning event to end event for synthetic events. This will allow seeing the stack trace of when a task is scheduled out and recorded when it gets scheduled back in. - Add trace event helper __get_buf() to use as a temporary buffer when printing out trace event output. - Add kernel command line to create trace instances on boot up. - Add enabling of events to instances created at boot up. - Add trace_array_puts() to write into instances. - Allow boot instances to take a snapshot at the end of boot up. - Allow live patch modules to include trace events - Minor fixes and clean ups -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY/PaaBQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qh5iAPoD0LKZzD33rhO5Ec4hoexE0DkqycP3 dvmOMbCBL8GkxwEA+d2gLz/EquSFm166hc4D79Sn3geCqvkwmy8vQWVjIQc= =M82D -----END PGP SIGNATURE----- Merge tag 'trace-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Add function names as a way to filter function addresses - Add sample module to test ftrace ops and dynamic trampolines - Allow stack traces to be passed from beginning event to end event for synthetic events. This will allow seeing the stack trace of when a task is scheduled out and recorded when it gets scheduled back in. - Add trace event helper __get_buf() to use as a temporary buffer when printing out trace event output. - Add kernel command line to create trace instances on boot up. - Add enabling of events to instances created at boot up. - Add trace_array_puts() to write into instances. - Allow boot instances to take a snapshot at the end of boot up. - Allow live patch modules to include trace events - Minor fixes and clean ups * tag 'trace-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (31 commits) tracing: Remove unnecessary NULL assignment tracepoint: Allow livepatch module add trace event tracing: Always use canonical ftrace path tracing/histogram: Fix stacktrace histogram Documententation tracing/histogram: Fix stacktrace key tracing/histogram: Fix a few problems with stacktrace variable printing tracing: Add BUILD_BUG() to make sure stacktrace fits in strings tracing/histogram: Don't use strlen to find length of stacktrace variables tracing: Allow boot instances to have snapshot buffers tracing: Add trace_array_puts() to write into instance tracing: Add enabling of events to boot instances tracing: Add creation of instances at boot command line tracing: Fix trace_event_raw_event_synth() if else statement samples: ftrace: Make some global variables static ftrace: sample: avoid open-coded 64-bit division samples: ftrace: Include the nospec-branch.h only for x86 tracing: Acquire buffer from temparary trace sequence tracing/histogram: Wrap remaining shell snippets in code blocks tracing/osnoise: No need for schedule_hrtimeout range bpf/tracing: Use stage6 of tracing to not duplicate macros ... |
||
Linus Torvalds
|
d392e49ad8 |
Tracing tools updates for 6.3:
- Use total duration to calculate average in rtla osnoise_hist - Use 2 digit precision for displaying average - Print an intuitive auto analysis of timerlat results - Add auto analysis to timerlat top - Add hwnoise, which is the same as osnoise but focuses on hardware - Small clean ups -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY/PB/hQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qo6mAP9Ul7TSaiQ56H0yy5GCwokOBbj2JnkY N2NCtCv8AEFDDgD/ZgWWLNHglDWfD9V/aAPI5zWGoep3DfnOL5bCWhT/Agg= =eM96 -----END PGP SIGNATURE----- Merge tag 'trace-tools-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing tools updates from Steven Rostedt: - Use total duration to calculate average in rtla osnoise_hist - Use 2 digit precision for displaying average - Print an intuitive auto analysis of timerlat results - Add auto analysis to timerlat top - Add hwnoise, which is the same as osnoise but focuses on hardware - Small clean ups * tag 'trace-tools-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: Documentation/rtla: Add hwnoise man page rtla: Add hwnoise tool Documentation/rtla: Add timerlat-top auto-analysis options rtla/timerlat: Add auto-analysis support to timerlat top rtla/timerlat: Add auto-analysis core tools/tracing/rtla: osnoise_hist: display average with two-digit precision tools/tracing/rtla: osnoise_hist: use total duration for average calculation tools/rv: Remove unneeded semicolon |
||
Linus Torvalds
|
2562af68f0 |
Updates to ktest.pl:
- Fix three instances that the tty is not given back to the console on exit. Forcing the user to do a "reset" to get the console back. - Fix the console monitor to not hang when too much data is given by the ssh output. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY/OmkhQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qlfKAP9ijinbEXt+fuuhjB0HqmERelUBKH9g 9HiQl+yzKh2LiQEAgnOKK8j3MO1VUOlmVso38+Kc3Tp1jEr0KbooTqKiPAU= =aoI2 -----END PGP SIGNATURE----- Merge tag 'ktest-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest Pull ktest updates from Steven Rostedt: - Fix three instances that the tty is not given back to the console on exit. Forcing the user to do a "reset" to get the console back. - Fix the console monitor to not hang when too much data is given by the ssh output. * tag 'ktest-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Restore stty setting at first in dodie ktest.pl: Add RUN_TIMEOUT option with default unlimited ktest.pl: Give back console on Ctrt^C on monitor ktest.pl: Fix missing "end_monitor" when machine check fails |
||
Linus Torvalds
|
89f1a2440a |
linux-kselftest-kunit-6.3-rc1
This KUnit update for Linux 6.3-rc1 consists of cleanups, new features, and documentation updates: -- adds Function Redirection API to isolate the code being tested from other parts of the kernel. functionredirection.rst has the details. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmP1c3AACgkQCwJExA0N Qxxbwg//TK0YlpQhoO2AgqSp3F8QlXeFKNdm5rHjBBVMYOQOl6rEB+4uznm2AOD9 PZmQfAI+bcxMflSMDEBHEwbh6gLyZJKrsMsxuH2k/LQeWHAbuxHVq+/K4kqzhuhi QA4ZFKFqnHy+U7jCOGdMtrg9oyg7Glz00fq5pX2iz3FWsE/JpuDZ559RoB9zT9Pu VnZ+k42Svxkdmf8fXhSCH7C66k9fKkcQm7IGyVbnsWqmldCHpQ6kIjJVTeQSng4j tXkcys37I/d3/Ffz63rke7+WmJrQviL/gg3PqDmEEVxeX8T3GBT01uONTk+TqyWd GKudu1lfvuyylFMDoR/5gXr2hr5OJJTGjTfEtwWq7xM0NSiIFHS3/uEYZlE9g3+U z2/DKMWOHrzJ2G78dfi5fokFdMfGnz2hBCZa9czSxIbjafxLhjSgnt112mDvkJsZ leeVTB9x6g0b+VYwPKYa9gOmFQyZDGTTsJVT9iaAnhEvlxIRoqxZxzW/jFKgHV/r ZNRg/kcPfe7m6H15PEblFIuLC4LT/LtDxD8XvkKt42XnG2fuAPS20Jkv6/XB9Ew6 3H1Su27TXIksUD/Z/ZPP9mBno7rwOLrZUa4QNzXqi6q2sbdXP5apg96cPDU0gvI5 sq4zwLgHVuIQ8dfX/hgmqZ8VEcvSFDMINoS+SYGvKjxoTzvd+Sw= =PloE -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-kunit-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit update from Shuah Khan: - add Function Redirection API to isolate the code being tested from other parts of the kernel. Documentation/dev-tools/kunit/api/functionredirection.rst has the details. * tag 'linux-kselftest-kunit-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: Add printf attribute to fail_current_test_impl lib/hashtable_test.c: add test for the hashtable structure Documentation: Add Function Redirection API docs kunit: Expose 'static stub' API to redirect functions kunit: Add "hooks" to call into KUnit when it's built as a module kunit: kunit.py extract handlers tools/testing/kunit/kunit.py: remove redundant double check |
||
Linus Torvalds
|
d6296cb653 |
linux-kselftest-next-6.3-rc1
This Kselftest update for Linux 6.3-rc1 consists of: -- several patches to fix incorrect kernel headers search path from Mathieu Desnoyers -- a few follow-on fixes found during testing the above change -- miscellaneous fixes -- support for filtering and enumerating tests -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmP1XGEACgkQCwJExA0N QxxWgQ//Wv5+bfosQ2zlcKt87OpoJGlfhGocPqfshyNsPLxaSdsMq+IJnbOcGdR9 myH1fZAlqWbSURMdi3BpxDGxvtA5uHQI6Pr/lHiKLH2CEZZ+Xe0tOT4uqRgiy1Ji 8epGY6Ao7aq5s3JeNGK7++e9Kgy9pVh6ktYMqlBGfF16qBgV3oR/Y6ohByeutqqG +HiTvk3rfoT/JvIo1KEbuPA72BLzp3LyunOHOtP1gk3c88xzGli9WsC6CJq5BHCL mIj/ht8GDxjMkiQG9TwHFFT8SBAfXs5qQbnHXsBm1BAj2Is99XVS3pyNDDSNlhtl 5IO/3ozYpwdIGPFOyrOYXNcc5YSgmdZm6YX5gTWjvBq1Atc0cu4hUaIQ7J++vRD0 HgEbUlmkEkYbSom/2OnEdBxQhjXEdy4ZN8Z97PojS/7TEk19tjAzaJ2SdI9OiFxG 6DhDeF8fGSmAsueRBBDZZMi51ZUXKOTB9Q1vPG9cbfWE0sDkN/Ts2OU2NHxaAKTg RAUxPgJHl8V7d5eZ29kmNF7NoU/fJIY2w8I0L3Fp7ZC/yFxj2V+nKcxADYmh0Kv6 zv6jakpkmpzE+n3BRTG8c9g1o/9LdYuP8He/MOiCOtZJ6ZbmE7YjgwlGCgBWC3Kk d4O/7NMDAFM6KplxapJ6Jkwca/q18vFFg17NVIj8NxkM3sSRWs0= =9Ayr -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-next-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest update from Shuah Khan: - several patches to fix incorrect kernel headers search path from Mathieu Desnoyers - a few follow-on fixes found during testing the above change - miscellaneous fixes - support for filtering and enumerating tests * tag 'linux-kselftest-next-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (40 commits) selftests/user_events: add a note about user_events.h dependency selftests/mount_setattr: fix to make run_tests failure selftests/mount_setattr: fix redefine struct mount_attr build error selftests/sched: fix warn_unused_result build warns selftests/ptp: Remove clean target from Makefile selftests: use printf instead of echo -ne selftests/ftrace: Fix bash specific "==" operator selftests: tpm2: remove redundant ord() selftests: find echo binary to use -ne options selftests: Fix spelling mistake "allright" -> "all right" selftests: tdx: Use installed kernel headers search path selftests: ptrace: Use installed kernel headers search path selftests: memfd: Use installed kernel headers search path selftests: iommu: Use installed kernel headers search path selftests: x86: Fix incorrect kernel headers search path selftests: vm: Fix incorrect kernel headers search path selftests: user_events: Fix incorrect kernel headers search path selftests: sync: Fix incorrect kernel headers search path selftests: seccomp: Fix incorrect kernel headers search path selftests: sched: Fix incorrect kernel headers search path ... |
||
Linus Torvalds
|
f01d4c8a22 |
nolibc updates for v6.3
o Add s390 support. o Add support for the ARM Thumb1 instruction set. o Fix O_* flags definitions for open() and fcntl(). o Make errno a weak symbol instead of a static variable. o Export environ as a weak symbol. o Export _auxv as a weak symbol for auxilliary vector retrieval. o Implement getauxval() and getpagesize(). o Further improve self tests, including permitting userland testing of the nolibc library. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmPh1DITHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jJTqD/9FPv58m1ZJWP8j8EMF9p6Pd2GuYJ/F t0tSf8Qmv0tTLqtPzZtu5E5b5bTvsgxQkQJUGLtUBf5l0AsyQt5ve5EUlzGgBHAP 8opwLEzCPUMhjq6ZsHJrmLIPwrH1reVYiAV2uIdBxLHLjGF8QLdYgqIGtguRBIHT o9HS9RAyPxvMmV8OZqhp+NLjcEzKGloUBdcnDLURQ8Wy12vSQnALl9w1OKiN40rz dlmXcysn8TboRWZS/DJqr/Xsg5W8ZMIfxrlopgR+FwrqutwH2ZDKgnc5ixm9YxFF CJCM2QZO8d8UtAxllJRH3NApTCHJh6c257w4awEU97hgkHfhw0tHgRs6sOz6ho0g O5OeOTAv0NkNNt5jGHXI4s0iQwVU/Ek6m3N8RC2GGzuMXGDcKvbFzGB4T8m8AhYL MnyaQvuq8SWhE84c+gQgxagZ5cdm8r2hDgnSrlI7P19W5SCsQq7MNSo1WyHQ7uss sMyxomvCC3y4pMgHcJHWwxtjR/BKjN1wtgCHCvTFcE8k98ti/ycKS6X/zQbGie/1 j20AgP0Cli2MVq+vocInvn0Gf4Ce0xxu5kB0NM8RMX+uiYNB0cJR4lIyWxt0680U M2Ya6AnfO8Sn57BptTp+QaqZidx9IJJzrAY4QBsdzXIsyJ2kKTK8BVNIaWMQ96nB twKV/fU0HWWcJQ== =S+cL -----END PGP SIGNATURE----- Merge tag 'nolibc.2023.02.06a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull nolibc updates from Paul McKenney: - Add s390 support - Add support for the ARM Thumb1 instruction set - Fix O_* flags definitions for open() and fcntl() - Make errno a weak symbol instead of a static variable - Export environ as a weak symbol - Export _auxv as a weak symbol for auxilliary vector retrieval - Implement getauxval() and getpagesize() - Further improve self tests, including permitting userland testing of the nolibc library * tag 'nolibc.2023.02.06a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (28 commits) selftests/nolibc: Add a "run-user" target to test the program in user land selftests/nolibc: Support "x86_64" for arch name selftests/nolibc: Add `getpagesize(2)` selftest nolibc/sys: Implement `getpagesize(2)` function nolibc/stdlib: Implement `getauxval(3)` function tools/nolibc: add auxiliary vector retrieval for s390 tools/nolibc: add auxiliary vector retrieval for mips tools/nolibc: add auxiliary vector retrieval for riscv tools/nolibc: add auxiliary vector retrieval for arm tools/nolibc: add auxiliary vector retrieval for arm64 tools/nolibc: add auxiliary vector retrieval for x86_64 tools/nolibc: add auxiliary vector retrieval for i386 tools/nolibc: export environ as a weak symbol on s390 tools/nolibc: export environ as a weak symbol on riscv tools/nolibc: export environ as a weak symbol on mips tools/nolibc: export environ as a weak symbol on arm tools/nolibc: export environ as a weak symbol on arm64 tools/nolibc: export environ as a weak symbol on i386 tools/nolibc: export environ as a weak symbol on x86_64 tools/nolibc: make errno a weak symbol instead of a static one ... |
||
Linus Torvalds
|
192a5e0a19 |
LKMM updates for v6.3
Documentation updates. Add read-modify-write sequences, which means that stronger primitives more consistently result in stronger ordering, while still remaining in the envelope of the hardware that supports Linux. Address, data, and control dependencies used to ignore data that was stored in temporaries. This update extends these dependency chains to include unmarked intra-thread stores and loads. Note that these unmarked stores and loads should not be concurrently accessed from multiple threads, and doing so will cause LKMM to flag such accesses as data races. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmPtYNQTHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jHMaEACfruLJV/hao7R1et0CLasWL6LMenq6 MbzFiOWDMBXxTMUOdAEeM5JQiIsHr8XZbs80hX1OEQb9VPG61HMy/8jqTYtfbGGt 3EykqAKQ8my1/7wEPSfrO/icvPf/czuT1GYYNQi+PGnlrBKUHPkqfuDpPz5E6p/+ hIojbtXcFLIdB42sBw5JSG3itX6lTlmJFZEfmkYCIlgBQxGTlbK7Bpagml+7zGTD mQT824OKiPJ6aerUuBzCUURq45JvNd9jE39Gc5KV63pxR2hOcsCZz3jYA1ZQcKeX UP+ZowKC3WH6iLhxmhnsdAIlaeQRcOvU46B0PHdwIKhV1CVLZR4qINPFIPJ2u4Oo kwsdG8hBHnNnapPMnhmk8DOZRz1SX2Q9ZR35ZOtOOFWw41ZRkGp3fE6JlKaF0pEt 3SlZ98wkxpV5YEQ67clpVGCPdg0yMWNnos4D1Yw82mpI2DH5NF60R5x6Gb/B2QyX fp/0SpkXwc4PbLY7sHYWH1MF+bRFkJOeDw2XesMMT+Cjn20fqtR0HGFO/rPHeDqQ qqamNFQVkP7Y/BWzxR27iH9xFqI8a8BKI18/IYbfQZ+eNwULOCCXqdQpuRaTKPaM 4h6Ebtx/j3oXR0TYtb84mWwaKNO17fo8zMH4tn1Jk+K4OrcxCop5m29fkX1Fjqqf BMpxir7tN4DK7Q== =uGmQ -----END PGP SIGNATURE----- Merge tag 'lkmm.2023.02.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull LKMM (Linux Kernel Memory Model) updates from Paul McKenney: "Documentation updates. Add read-modify-write sequences, which means that stronger primitives more consistently result in stronger ordering, while still remaining in the envelope of the hardware that supports Linux. Address, data, and control dependencies used to ignore data that was stored in temporaries. This update extends these dependency chains to include unmarked intra-thread stores and loads. Note that these unmarked stores and loads should not be concurrently accessed from multiple threads, and doing so will cause LKMM to flag such accesses as data races" * tag 'lkmm.2023.02.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: tools: memory-model: Make plain accesses carry dependencies Documentation: Fixed a typo in atomic_t.txt tools: memory-model: Add rmw-sequences to the LKMM locking/memory-barriers.txt: Improve documentation for writel() example |
||
Tejun Heo
|
d0093aaefa |
selftests/bpf: Add a test case for bpf_cgroup_from_id()
Add a test case for bpf_cgroup_from_id. Signed-off-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/Y/bBlt+tPozcQgws@slm.duckdns.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Lu Wei
|
44bd0394fe |
selftests: fib_tests: Add test cases for IPv4/IPv6 in route notify
Add tests to check whether the total fib info length is calculated corretly in route notify process. Signed-off-by: Lu Wei <luwei32@huawei.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230222083629.335683-3-luwei32@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
Jakub Kicinski
|
fd2a55e74a |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Fix broken listing of set elements when table has an owner. 2) Fix conntrack refcount leak in ctnetlink with related conntrack entries, from Hangyu Hua. 3) Fix use-after-free/double-free in ctnetlink conntrack insert path, from Florian Westphal. 4) Fix ip6t_rpfilter with VRF, from Phil Sutter. 5) Fix use-after-free in ebtables reported by syzbot, also from Florian. 6) Use skb->len in xt_length to deal with IPv6 jumbo packets, from Xin Long. 7) Fix NETLINK_LISTEN_ALL_NSID with ctnetlink, from Florian Westphal. 8) Fix memleak in {ip_,ip6_,arp_}tables in ENOMEM error case, from Pavel Tikhomirov. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: x_tables: fix percpu counter block leak on error path when creating new netns netfilter: ctnetlink: make event listener tracking global netfilter: xt_length: use skb len to match in length_mt6 netfilter: ebtables: fix table blob use-after-free netfilter: ip6t_rpfilter: Fix regression with VRF interfaces netfilter: conntrack: fix rmmod double-free race netfilter: ctnetlink: fix possible refcount leak in ctnetlink_create_conntrack() netfilter: nf_tables: allow to fetch set elements when table has an owner ==================== Link: https://lore.kernel.org/r/20230222092137.88637-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Stanislav Fomichev
|
9fa0289285 |
selftests/bpf: Fix BPF_FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL for empty flow label
Kernel's flow dissector continues to parse the packet when the (optional) IPv6 flow label is empty even when instructed to stop (via BPF_FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL). Do the same in our reference BPF reimplementation. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20230221180518.2139026-1-sdf@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Florent Revest
|
b539a287ba |
selftests/bpf: Fix cross compilation with CLANG_CROSS_FLAGS
I cross-compile my BPF selftests with the following command: CLANG_CROSS_FLAGS="--target=aarch64-linux-gnu --sysroot=/sysroot/" \ make LLVM=1 CC=clang CROSS_COMPILE=aarch64-linux-gnu- SRCARCH=arm64 (Note the use of CLANG_CROSS_FLAGS to specify a custom sysroot instead of letting clang use gcc's default sysroot) However, CLANG_CROSS_FLAGS gets propagated to host tools builds (libbpf and bpftool) and because they reference it directly in their Makefiles, they end up cross-compiling host objects which results in linking errors. This patch ensures that CLANG_CROSS_FLAGS is reset if CROSS_COMPILE isn't set (for example when reaching a BPF host tool build). Signed-off-by: Florent Revest <revest@chromium.org> Link: https://lore.kernel.org/r/20230217151832.27784-1-revest@chromium.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Tiezhu Yang
|
1f265d2aea |
selftests/bpf: Remove not used headers
The following three uapi headers: tools/arch/arm64/include/uapi/asm/bpf_perf_event.h tools/arch/s390/include/uapi/asm/bpf_perf_event.h tools/arch/s390/include/uapi/asm/ptrace.h were introduced in commit |
||
Linus Torvalds
|
291a73a8e6 |
Landlock updates for v6.3-rc1
-----BEGIN PGP SIGNATURE----- iIYEABYIAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCY/O9MBAcbWljQGRpZ2lr b2QubmV0AAoJEOXj0OiMgvbSFbgA/RPjQO0J/todz9qJMhbx4QhZizKK8F8hM9Yl rwhOZWmjAP4wTxOsnrjdR9UusYAr818j01D7ncpp9bM4e2ZNj1wEDw== =Xe3q -----END PGP SIGNATURE----- Merge tag 'landlock-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock updates from Mickaël Salaün: "This improves documentation, and makes some tests more flexible to be able to run on systems without overlayfs or with Yama restrictions" * tag 'landlock-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: MAINTAINERS: Update Landlock repository selftests/landlock: Test ptrace as much as possible with Yama selftests/landlock: Skip overlayfs tests when not supported landlock: Explain file descriptor access rights |
||
Eduard Zingerman
|
6338a94d5a |
selftests/bpf: Tests for uninitialized stack reads
Three testcases to make sure that stack reads from uninitialized locations are accepted by verifier when executed in privileged mode: - read from a fixed offset; - read from a variable offset; - passing a pointer to stack to a helper converts STACK_INVALID to STACK_MISC. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20230219200427.606541-3-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Eduard Zingerman
|
6715df8d5d |
bpf: Allow reads from uninit stack
This commits updates the following functions to allow reads from uninitialized stack locations when env->allow_uninit_stack option is enabled: - check_stack_read_fixed_off() - check_stack_range_initialized(), called from: - check_stack_read_var_off() - check_helper_mem_access() Such change allows to relax logic in stacksafe() to treat STACK_MISC and STACK_INVALID in a same way and make the following stack slot configurations equivalent: | Cached state | Current state | | stack slot | stack slot | |------------------+------------------| | STACK_INVALID or | STACK_INVALID or | | STACK_MISC | STACK_SPILL or | | | STACK_MISC or | | | STACK_ZERO or | | | STACK_DYNPTR | This leads to significant verification speed gains (see below). The idea was suggested by Andrii Nakryiko [1] and initial patch was created by Alexei Starovoitov [2]. Currently the env->allow_uninit_stack is allowed for programs loaded by users with CAP_PERFMON or CAP_SYS_ADMIN capabilities. A number of test cases from verifier/*.c were expecting uninitialized stack access to be an error. These test cases were updated to execute in unprivileged mode (thus preserving the tests). The test progs/test_global_func10.c expected "invalid indirect read from stack" error message because of the access to uninitialized memory region. This error is no longer possible in privileged mode. The test is updated to provoke an error "invalid indirect access to stack" because of access to invalid stack address (such error is not verified by progs/test_global_func*.c series of tests). The following tests had to be removed because these can't be made unprivileged: - verifier/sock.c: - "sk_storage_get(map, skb->sk, &stack_value, 1): partially init stack_value" BPF_PROG_TYPE_SCHED_CLS programs are not executed in unprivileged mode. - verifier/var_off.c: - "indirect variable-offset stack access, max_off+size > max_initialized" - "indirect variable-offset stack access, uninitialized" These tests verify that access to uninitialized stack values is detected when stack offset is not a constant. However, variable stack access is prohibited in unprivileged mode, thus these tests are no longer valid. * * * Here is veristat log comparing this patch with current master on a set of selftest binaries listed in tools/testing/selftests/bpf/veristat.cfg and cilium BPF binaries (see [3]): $ ./veristat -e file,prog,states -C -f 'states_pct<-30' master.log current.log File Program States (A) States (B) States (DIFF) -------------------------- -------------------------- ---------- ---------- ---------------- bpf_host.o tail_handle_ipv6_from_host 349 244 -105 (-30.09%) bpf_host.o tail_handle_nat_fwd_ipv4 1320 895 -425 (-32.20%) bpf_lxc.o tail_handle_nat_fwd_ipv4 1320 895 -425 (-32.20%) bpf_sock.o cil_sock4_connect 70 48 -22 (-31.43%) bpf_sock.o cil_sock4_sendmsg 68 46 -22 (-32.35%) bpf_xdp.o tail_handle_nat_fwd_ipv4 1554 803 -751 (-48.33%) bpf_xdp.o tail_lb_ipv4 6457 2473 -3984 (-61.70%) bpf_xdp.o tail_lb_ipv6 7249 3908 -3341 (-46.09%) pyperf600_bpf_loop.bpf.o on_event 287 145 -142 (-49.48%) strobemeta.bpf.o on_event 15915 4772 -11143 (-70.02%) strobemeta_nounroll2.bpf.o on_event 17087 3820 -13267 (-77.64%) xdp_synproxy_kern.bpf.o syncookie_tc 21271 6635 -14636 (-68.81%) xdp_synproxy_kern.bpf.o syncookie_xdp 23122 6024 -17098 (-73.95%) -------------------------- -------------------------- ---------- ---------- ---------------- Note: I limited selection by states_pct<-30%. Inspection of differences in pyperf600_bpf_loop behavior shows that the following patch for the test removes almost all differences: - a/tools/testing/selftests/bpf/progs/pyperf.h + b/tools/testing/selftests/bpf/progs/pyperf.h @ -266,8 +266,8 @ int __on_event(struct bpf_raw_tracepoint_args *ctx) } if (event->pthread_match || !pidData->use_tls) { - void* frame_ptr; - FrameData frame; + void* frame_ptr = 0; + FrameData frame = {}; Symbol sym = {}; int cur_cpu = bpf_get_smp_processor_id(); W/o this patch the difference comes from the following pattern (for different variables): static bool get_frame_data(... FrameData *frame ...) { ... bpf_probe_read_user(&frame->f_code, ...); if (!frame->f_code) return false; ... bpf_probe_read_user(&frame->co_name, ...); if (frame->co_name) ...; } int __on_event(struct bpf_raw_tracepoint_args *ctx) { FrameData frame; ... get_frame_data(... &frame ...) // indirectly via a bpf_loop & callback ... } SEC("raw_tracepoint/kfree_skb") int on_event(struct bpf_raw_tracepoint_args* ctx) { ... ret |= __on_event(ctx); ret |= __on_event(ctx); ... } With regards to value `frame->co_name` the following is important: - Because of the conditional `if (!frame->f_code)` each call to __on_event() produces two states, one with `frame->co_name` marked as STACK_MISC, another with it as is (and marked STACK_INVALID on a first call). - The call to bpf_probe_read_user() does not mark stack slots corresponding to `&frame->co_name` as REG_LIVE_WRITTEN but it marks these slots as BPF_MISC, this happens because of the following loop in the check_helper_call(): for (i = 0; i < meta.access_size; i++) { err = check_mem_access(env, insn_idx, meta.regno, i, BPF_B, BPF_WRITE, -1, false); if (err) return err; } Note the size of the write, it is a one byte write for each byte touched by a helper. The BPF_B write does not lead to write marks for the target stack slot. - Which means that w/o this patch when second __on_event() call is verified `if (frame->co_name)` will propagate read marks first to a stack slot with STACK_MISC marks and second to a stack slot with STACK_INVALID marks and these states would be considered different. [1] https://lore.kernel.org/bpf/CAEf4BzY3e+ZuC6HUa8dCiUovQRg2SzEk7M-dSkqNZyn=xEmnPA@mail.gmail.com/ [2] https://lore.kernel.org/bpf/CAADnVQKs2i1iuZ5SUGuJtxWVfGYR9kDgYKhq3rNV+kBLQCu7rA@mail.gmail.com/ [3] git@github.com:anakryiko/cilium.git Suggested-by: Andrii Nakryiko <andrii@kernel.org> Co-developed-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20230219200427.606541-2-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Linus Torvalds
|
6c71297eaf |
for-linus-2023022201
-----BEGIN PGP SIGNATURE----- iQJSBAABCAA8FiEEoEVH9lhNrxiMPSyI7MXwXhnZSjYFAmP15aoeHGJlbmphbWlu LnRpc3NvaXJlc0ByZWRoYXQuY29tAAoJEOzF8F4Z2Uo2nwkP/Rcr5lZYKQ59ezoJ PwHx/0wO1Qpgd4fRwD5Mvxynmfoq20A6FZFpmtjUjNcP3dm3X2UJtXE3HkDECCFP 5daqTFOswFiPFtcMlIl+SHxNgIIlTodbqx9MAFj/7n5aihB54JpTHWsgbENj35Y1 RLHYDi0+wj69y9ctOkqKGWHp8Uf220RWrD7zZf7AJAc5cwot1kM00RSy9dSAJ0vB riZdCQqYwXbf4I1uFzthS6AdIIWcpmpZyYFnsF7F2xQADqCNXr1MTmG0uC+Ey/J/ 0PZXjkyMO/pNwxarRiXmBKnsJJlJajxRXGtpgKYZu8AnIaXuNu/z987Y1pZ/kYis OQSKib2bGWzT2MycqiuVVrOChIMvqmk2aPRvg73jojpSySYTKn1Jp/XHyXS8qkkQ HJ/u6VPpe42GdfOGM7V9ig+80z/5D5u1XJECoPpxyKHWQ8S7ZlczQjVT+a8nUuBV hPTiqAYE9NT6SQJ0b5z2uhBdGRzvAbCZzDCgvjE87zsRmLzFk/fzMdMPZrlADKMJ 3qu7ey2GYOBNfnDcJmPu5HmK/A9BaPZiZAMakqjGpezZbe+LGBNskXTRwPpNC+Dh 11pna0ns+vlxeT7nonO0JsYvsKWy0pPcBvhyUEHWsmHgyagRLIsvg01ezB/Ivu0O xYj3UPVEGTiwHBt9xnaZcIjRSPSZ =cBvC -----END PGP SIGNATURE----- Merge tag 'for-linus-2023022201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Benjamin Tissoires: - HID-BPF infrastructure: this allows to start using HID-BPF. Note that the mechanism to ship HID-BPF program through the kernel tree is still not implemented yet (but is planned). This should be a no-op for 99% of users. Also we are gaining kselftests for the HID tree (Benjamin Tissoires) - Some UAF fixes in workers when using uhid (Pietro Borrello & Benjamin Tissoires) - Constify hid_ll_driver (Thomas Weißschuh) - Allow more custom IIO sensors through HID (Philipp Jungkamp) - Logitech HID++ fixes for scroll wheel, protocol and debug (Bastien Nocera) - Some new device support: Steam Deck (Vicki Pfau), UClogic (José Expósito), Logitech G923 Xbox Edition steering wheel (Walt Holman), EVision keyboards (Philippe Valembois) - other assorted code cleanups and fixes * tag 'for-linus-2023022201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (99 commits) HID: mcp-2221: prevent UAF in delayed work hid: bigben_probe(): validate report count HID: asus: use spinlock to safely schedule workers HID: asus: use spinlock to protect concurrent accesses HID: bigben: use spinlock to safely schedule workers HID: bigben_worker() remove unneeded check on report_field HID: bigben: use spinlock to protect concurrent accesses HID: logitech-hidpp: Add myself to authors HID: logitech-hidpp: Retry commands when device is busy HID: logitech-hidpp: Add more debug statements HID: Add support for Logitech G923 Xbox Edition steering wheel HID: logitech-hidpp: Add Signature M650 HID: logitech-hidpp: Remove HIDPP_QUIRK_NO_HIDINPUT quirk HID: logitech-hidpp: Don't restart communication if not necessary HID: logitech-hidpp: Add constants for HID++ 2.0 error codes Revert "HID: logitech-hidpp: add a module parameter to keep firmware gestures" HID: logitech-hidpp: Hard-code HID++ 1.0 fast scroll support HID: i2c-hid: goodix: Add mainboard-vddio-supply dt-bindings: HID: i2c-hid: goodix: Add mainboard-vddio-supply HID: i2c-hid: goodix: Stop tying the reset line to the regulator ... |
||
Linus Torvalds
|
064d7dcf51 |
sound updates for 6.3-rc1
The majority of works in this cycle are about ASoC spread over trees. Most of them are for new devices and cleanups / refactoring works, and not much significant changes are seen in the core side. Below are some highlights: ASoC: - Continued refactoring to move into common helper functions - Lots of DT schema conversons and stylistic nits - Continued work on building out the new SOF IPC4 scheme - Continued work for Intel AVS - New drivers for Awinc AT88395, Infineon PEB2466, Iron Device SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034, Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1 ALSA: - A few cleanups to make the remove callbacks to void returns - FireWire refactoring and enhancements - PCM kselftest enhancements -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmPw+kkOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE9X3RAAkxjjtk+BRF+tvS6VYQhezTOE7frSqpxB+ZHm KjdQClfpbPqYVD/pUEnz+N68bmOZKK8Ihif+LaaW+8NJJa/1kivQWNCQLCvm7L71 x7TRkOYvrzlx+Fhpf6JacOM8VaBkRrfd+cK6pQSv8b72ZTWorfenkaC9OMdL2NEY YI/sH5zZd6dDoKfQ+WPsplOSCog3KKgAGvn4qEQKxADsyOjsu3rpgijcgDmVc9XT y2RMAEPID68TtAtcNhesurLEKZ+4mEDvALQjAsxxb99lfAFDlDBezEO4/dl2v9Db yebsEnM+W5z3dVl13Aok9XtVCxrhy7n+v5z060ZEoTxIEJK7YVCWx8XCVL1KSgNV 31MEVDgf7PrsYAWr54yNF2lmwJh5YchZQ28ngZRHmQ7jMpVbO6ypyIzf77fEQSam SiCG7hurSCB38LUb7fg1WsjSRupRamoPDhRG9q7C36ePdeYRkBqOJsSmfABjN/Cb v0fixm45PtZpWoZUpLAzNEtkQA665Sf2SoAnAY+kCPllYuNXXHdEomokppffXHbO Xbq/wcehpOJKR9vqWhsBuVz34UbGyuM1SBLrNXj+sr24Xv6Uy4E5GcJ75rO1E3TR gTGTIM/DtOwTGKyceQ30Gnl9M2wKeP9/qEhkH60XgyzitGp9iAvrIvcU1ODVlfgN ZSBzjOk= =9s9c -----END PGP SIGNATURE----- Merge tag 'sound-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "The majority of works in this cycle are about ASoC spread over trees. Most of them are for new devices and cleanups / refactoring works, and not much significant changes are seen in the core side. Below are some highlights: ASoC: - Continued refactoring to move into common helper functions - Lots of DT schema conversons and stylistic nits - Continued work on building out the new SOF IPC4 scheme - Continued work for Intel AVS - New drivers for Awinc AT88395, Infineon PEB2466, Iron Device SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034, Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1 ALSA: - A few cleanups to make the remove callbacks to void returns - FireWire refactoring and enhancements - PCM kselftest enhancements" * tag 'sound-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (398 commits) ALSA: hda/hdmi: Register with vga_switcheroo on Dual GPU Macbooks ASoC: soc-ac97: Return correct error codes ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared ASoC: cs35l45: Remove separate namespace for tables ASoC: cs35l45: Remove separate tables module ASoC: soc-ac97: Convert to agnostic GPIO API ASoC: dt-bindings: renesas,rsnd.yaml: drop "dmas/dma-names" from "rcar_sound,ssi" ALSA: hda: cs35l41: Enable Amp High Pass Filter ALSA: hda: cs35l41: Ensure firmware/tuning pairs are always loaded ALSA: hda: cs35l41: Correct error condition handling ASoC: codecs: wcd934x: Use min macro for comparison and assignment ASoC: Intel: Skylake: Fix struct definition ASoC: tlv320adcx140: extend list of supported samplerates ASoC: imx-pcm-rpmsg: Remove unused variable SoC: rt5682s: Disable jack detection interrupt during suspend ASoC: SOF: Intel: hda-dsp: Set streaming flag for d0i3 ASoC: SOF: Intel: Enable d0i3 work for ipc4 ASoC: SOF: ipc4: Wake up dsp core before sending ipc msg ASoC: SOF: Intel: hda-dsp: use set_pm_gate according to ipc version ASoC: SOF: Introduce a new set_pm_gate() IPC PM op ... |
||
Benjamin Tissoires
|
904e28c6de |
Merge branch 'for-6.3/hid-bpf' into for-linus
Initial support of HID-BPF (Benjamin Tissoires) The history is a little long for this series, as it was intended to be sent for v6.2. However some last minute issues forced us to postpone it to v6.3. Conflicts: * drivers/hid/i2c-hid/Kconfig: commit |
||
Linus Torvalds
|
5b7c4cabbb |
Networking changes for 6.3.
Core ---- - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols --------- - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF --- - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter --------- - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt. races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API ---------- - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers ---------------------- - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers ------- - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - enetc: support XDP_REDIRECT for XDP non-linear buffers - enetc: improve reconfig, avoid link flap and waiting for idle - enetc: support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation. Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmP1VIYACgkQMUZtbf5S IrvsChAApz0rNL/sPKxXTEfxZ1tN7D3sYxYKQPomxvl5BV+MvicrLddJy3KmzEFK nnJNO3nuRNuH422JQ/ylZ4mGX1opa6+5QJb0UINImXUI7Fm8HHBIuPGkv7d5CheZ 7JexFqjPJXUy9nPyh1Rra+IA9AcRd2U7jeGEZR38wb99bHJQj5Bzdk20WArEB0el n44aqg49LXH71bSeXRz77x5SjkwVtYiccQxLcnmTbjLU2xVraLvI2J+wAhHnVXWW 9lrU1+V4Ex2Xcd1xR0L0cHeK+meP1TrPRAeF+JDpVI3a/zJiE7cZjfHdG/jH5xWl leZJqghVozrZQNtewWWO7XhUFhMDgFu3W/1vNLjSHPZEqaz1JpM67J1+ql6s63l4 LMWoXbcYZz+SL9ZRCoPkbGue/5fKSHv8/Jl9Sh58+eTS+c/zgN8uFGRNFXLX1+EP n8uvt985PxMd6x1+dHumhOUzxnY4Sfi1vjitSunTsNFQ3Cmp4SO0IfBVJWfLUCuC xz5hbJGJJbSpvUsO+HWyCg83E5OWghRE/Onpt2jsQSZCrO9HDg4FRTEf3WAMgaqc edb5KfbRZPTJQM08gWdluXzSk1nw3FNP2tXW4XlgUrEbjb+fOk0V9dQg2gyYTxQ1 Nhvn8ZQPi6/GMMELHAIPGmmW1allyOGiAzGlQsv8EmL+OFM6WDI= =xXhC -----END PGP SIGNATURE----- Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... |
||
Linus Torvalds
|
69308402ca |
platform-drivers-x86 for v6.3-1
Highlights: - AMD PMC: Improvements to aid s2idle debugging - Dell WMI-DDV: hwmon support - INT3472 camera sensor power-management: Improve privacy LED support - Intel VSEC: Base TPMI (Topology Aware Register and PM Capsule Interface) support - Mellanox: SN5600 and Nvidia L1 switch support - Microsoft Surface Support: Various cleanups + code improvements - tools/intel-speed-select: Various improvements - Miscellaneous other cleanups / fixes The following is an automated git shortlog grouped by driver: Add include/linux/platform_data/x86 to MAINTAINERS: - Add include/linux/platform_data/x86 to MAINTAINERS Documentation/ABI: - Add new attribute for mlxreg-io sysfs interfaces Fix header inclusion in linux/platform_data/x86/soc.h: - Fix header inclusion in linux/platform_data/x86/soc.h HID: - surface-hid: Use target-ID enum instead of hard-coding values MAINTAINERS: - dell-wmi-sysman: drop Divya Bharathi - Add entry for TPMI driver Merge tag 'ib-leds-led_get-v6.3' into HEAD: - Merge tag 'ib-leds-led_get-v6.3' into HEAD acerhdf: - Drop empty platform remove function apple_gmux: - Drop no longer used ACPI_VIDEO Kconfig dependency dell-ddv: - Prefer asynchronous probing - Add hwmon support - Add "force" module param - Replace EIO with ENOMSG - Return error if buffer is empty - Add support for interface version 3 dell-smo8800: - Use min_t() for comparison and assignment dell-wmi-sysman: - Make kobj_type structure constant hp-wmi: - Ignore Win-Lock key events int1092: - Switch to use acpi_evaluate_dsm_typed() int3472/discrete: - add LEDS_CLASS dependency - Drop unnecessary obj->type == string check - Get the polarity from the _DSM entry - Move GPIO request to skl_int3472_register_clock() - Create a LED class device for the privacy LED - Refactor GPIO to sensor mapping intel: - punit_ipc: Drop empty platform remove function - oaktrail: Drop empty platform remove function intel/pmc: - Switch to use acpi_evaluate_dsm_typed() leds: - led-class: Add generic [devm_]led_get() - led-class: Add __devm_led_get() helper - led-class: Add led_module_get() helper - led-class: Add missing put_device() to led_put() media: - v4l2-core: Make the v4l2-core code enable/disable the privacy LED if present nvidia-wmi-ec-backlight: - Add force module parameter platform: - mellanox: mlx-platform: Move bus shift assignment out of the loop - mellanox: mlx-platform: Add mux selection register to regmap - mellanox: Extend all systems with I2C notification callback - mellanox: Split logic in init and exit flow - mellanox: Split initialization procedure - mellanox: Introduce support of new Nvidia L1 switch - mellanox: Introduce support for next-generation 800GB/s switch - mellanox: Cosmetic changes - rename to more common name - mellanox: Change "reset_pwr_converter_fail" attribute - mellanox: Introduce support for rack manager switch platform/mellanox: - mlxreg-hotplug: Allow more flexible hotplug events configuration platform/surface: - Switch to use acpi_evaluate_dsm_typed() - aggregator: Rename top-level request functions to avoid ambiguities - aggregator_registry: Fix target-ID of base-hub - aggregator: Enforce use of target-ID enum in device ID macros - dtx: Use target-ID enum instead of hard-coding values - aggregator_tabletsw: Use target-ID enum instead of hard-coding values - aggregator_hub: Use target-ID enum instead of hard-coding values - aggregator: Add target and source IDs to command trace events - aggregator: Improve documentation and handling of message target and source IDs platform/x86/amd: - pmc: Add line break for readability - pmc: differentiate STB/SMU messaging prints - pmc: Write dummy postcode into the STB DRAM - pmc: Add num_samples message id support to STB platform/x86/amd/pmf: - Add depends on CONFIG_POWER_SUPPLY platform/x86/intel: - Intel TPMI enumeration driver platform/x86/intel/tpmi: - ADD tpmi external interface for tpmi feature drivers - Process CPU package mapping platform/x86/intel/vsec: - Use mutex for ida_alloc() and ida_free() - Support private data - Enhance and Export intel_vsec_add_aux() - Add TPMI ID platform_data/mlxreg: - Add field with mapped resource address think-lmi: - Make kobj_type structure constant - Use min_t() for comparison and assignment tools/power/x86/intel-speed-select: - v1.14 release - Adjust uncore max/min frequency - Add Emerald Rapid quirk - Fix display of uncore min frequency - turbo-freq auto mode with SMT off - cpufreq reads on offline CPUs - Use null-terminated string - Remove duplicate dup() - Handle open() failure case - Remove unused non_block flag - Remove wrong check in set_isst_id() x86/platform/uv: - Make kobj_type structure constant -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmPzRpgUHGhkZWdvZWRl QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wYPwf+I6PP0XBg8MrivLc2DHklVojUU0aX /M0LbCP8gxCDdyisV8swC3e848riaTchYlUGASPZu0ieas1U7KsDvghkiittNvlI U+0h7TbkOQNymM8oE0oauflH4W5KwCXGrLsJWVkGk0lhJd6WmjXkjWLkruaXazLd kc5fq0QyzRVzhhCtocQ7qhIgXSZyKYx433VqbDR7/SUi5F2wkC9JbGY02maKWaK3 4lQaoyMKLjGlDr9YVv+UHTwLoXwP0mW/fjlsZ3Xz5lz6WfihQzPuOrl/10mRj0Ez eP9dlF1Dipee4BYS2FM5dtk5xPpqdVqRlQUX2qKzyDNTSx5wdtJnv8j/cg== =VoXq -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: - AMD PMC: Improvements to aid s2idle debugging - Dell WMI-DDV: hwmon support - INT3472 camera sensor power-management: Improve privacy LED support - Intel VSEC: Base TPMI (Topology Aware Register and PM Capsule Interface) support - Mellanox: SN5600 and Nvidia L1 switch support - Microsoft Surface Support: Various cleanups + code improvements - tools/intel-speed-select: Various improvements - Miscellaneous other cleanups / fixes * tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits) platform/x86: nvidia-wmi-ec-backlight: Add force module parameter platform/x86/amd/pmf: Add depends on CONFIG_POWER_SUPPLY platform/x86: dell-ddv: Prefer asynchronous probing platform/x86: dell-ddv: Add hwmon support Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces platform: mellanox: mlx-platform: Move bus shift assignment out of the loop platform: mellanox: mlx-platform: Add mux selection register to regmap platform_data/mlxreg: Add field with mapped resource address platform/mellanox: mlxreg-hotplug: Allow more flexible hotplug events configuration platform: mellanox: Extend all systems with I2C notification callback platform: mellanox: Split logic in init and exit flow platform: mellanox: Split initialization procedure platform: mellanox: Introduce support of new Nvidia L1 switch platform: mellanox: Introduce support for next-generation 800GB/s switch platform: mellanox: Cosmetic changes - rename to more common name platform: mellanox: Change "reset_pwr_converter_fail" attribute platform: mellanox: Introduce support for rack manager switch MAINTAINERS: dell-wmi-sysman: drop Divya Bharathi x86/platform/uv: Make kobj_type structure constant platform/x86: think-lmi: Make kobj_type structure constant ... |
||
Linus Torvalds
|
239451e903 |
xen: branch for v6.3-rc1
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCY/GzaAAKCRCAXGG7T9hj vhgtAP96ax9EV49/kCST52z9yGfGUA+giq/9Jm6bwHlP3PZXVAD/Wfhfp1HbxzFp CqXG7veXU+uGVP3lbpbYKNPV9DIOdgQ= =K+0Q -----END PGP SIGNATURE----- Merge tag 'for-linus-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - help deprecate the /proc/xen files by making the related information available via sysfs - mark the Xen variants of play_dead "noreturn" - support a shared Xen platform interrupt - several small cleanups and fixes * tag 'for-linus-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: sysfs: make kobj_type structure constant x86/Xen: drop leftover VM-assist uses xen: Replace one-element array with flexible-array member xen/grant-dma-iommu: Implement a dummy probe_device() callback xen/pvcalls-back: fix permanently masked event channel xen: Allow platform PCI interrupt to be shared x86/xen/time: prefer tsc as clocksource when it is invariant x86/xen: mark xen_pv_play_dead() as __noreturn x86/xen: don't let xen_pv_play_dead() return drivers/xen/hypervisor: Expose Xen SIF flags to userspace |
||
Paolo Bonzini
|
ddad47bfb9 |
KVM x86 APIC changes for 6.3:
- Remove a superfluous variables from apic_get_tmcct() - Fix various edge cases in x2APIC MSR emulation - Mark APIC timer as expired if its in one-shot mode and the count underflows while the vCPU task was being migrated - Reset xAPIC when userspace forces "impossible" x2APIC => xAPIC transition -----BEGIN PGP SIGNATURE----- iQJGBAABCgAwFiEEMHr+pfEFOIzK+KY1YJEiAU0MEvkFAmPsB58SHHNlYW5qY0Bn b29nbGUuY29tAAoJEGCRIgFNDBL5CK0P/1hhxUWokhNJX0skgf8uKhxTf8bLAq5F xr221M4Ac9YwjJaS0p4PJVSLVJxcVXHsyvanCOQh6AE8q1Ugz+iDLr2gAI+fHbJY lnczpAj1UhhttaLSOl13/31TaJdE2Ep0/q3+5vf1qQrOJYkElKpiDYbf3M8T5G72 pguUFhKKKeZcCB99Jpr0u0HupiwCZoYWvdx7mvzRhi11bWaUyYIWc9CBETmAb4kN 1UAmov16UrVOFAg/ssde6qPgUsAgB8XwJjta6oIQLeEm70L5ci6g/2Tw0IEwMybR yLCCST9eATl2U/hPV4KwBzSN1gHCAx4JDp4TKBR8ic+c+Z8CceIZln05fz6rQ8Sz ljyaRVFhaQZyZpjrZJ0h3kqMG1JT/Q4Hj9dq8RZJ0K73KVuCspxaJDHqp6a2p9D0 dDacDkD3LFIPBdem3hHcpmV2XduaMfQwspObJORarkkQTZZS6erxmPvK/6Quvmbk UdD+6hvuSQA8rxNKXF+fOBsnK/1xYvzkVis0sxMwthkSDvENdcPbmlD6kHLz52cg Jt+yw/85oIg7zBgEkG2c8+5bB2hw0SRPQBlW4j29jYUhRwXwHxuovllFS2GU7iIc fVNtocw5Q9WATp752va4bVjv9XeYBmExn99fd3xvFenTa/ya4+5gNFK8vc9zL++J x3fDhAPXmQHJ =ieB+ -----END PGP SIGNATURE----- Merge tag 'kvm-x86-apic-6.3' of https://github.com/kvm-x86/linux into HEAD KVM x86 APIC changes for 6.3: - Remove a superfluous variables from apic_get_tmcct() - Fix various edge cases in x2APIC MSR emulation - Mark APIC timer as expired if its in one-shot mode and the count underflows while the vCPU task was being migrated - Reset xAPIC when userspace forces "impossible" x2APIC => xAPIC transition |
||
Linus Torvalds
|
8bf1a529cd |
arm64 updates for 6.3:
- Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore. - Include TPIDR2 in the signal context and add the corresponding kselftests. - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time. - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64. - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables. - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values). - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure. - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice. - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone. - Further arm64 sysreg conversion and some fixes. - arm64 kselftest fixes and improvements. - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation. - Pseudo-NMI code generation optimisations. - Minor fixes for SME and TPIDR2 handling. - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmP0/QsACgkQa9axLQDI XvG+gA/+JDVEH9wRzAIZvbp9hSuohPc48xgAmIMP1eiVB0/5qeRjYAJwS33H0rXS BPC2kj9IBy/eQeM9ICg0nFd0zYznSVacITqe6NrqeJ1F+ftS4rrHdfxd+J7kIoCs V2L8e+BJvmHdhmNV2qMAgJdGlfxfQBA7fv2cy52HKYcouoOh1AUVR/x+yXVXAsCd qJP3+dlUKccgm/oc5unEC1eZ49u8O+EoasqOyfG6K5udMgzhEX3K6imT9J3hw0WT UjstYkx5uGS/prUrRCQAX96VCHoZmzEDKtQuHkHvQXEYXsYPF3ldbR2CziNJnHe7 QfSkjJlt8HAtExA+BkwEe9i0MQO/2VF5qsa2e4fA6l7uqGu3LOtS/jJd23C9n9fR Id8aBMeN6S8+MjqRA9L2uf4t6e4ISEHoG9ZRdc4WOwloxEEiJoIeun+7bHdOSZLj AFdHFCz4NXiiwC0UP0xPDI2YeCLqt5np7HmnrUqwzRpVO8UUagiJD8TIpcBSjBN9 J68eidenHUW7/SlIeaMKE2lmo8AUEAJs9AorDSugF19/ThJcQdx7vT2UAZjeVB3j 1dbbwajnlDOk/w8PQC4thFp5/MDlfst0htS3WRwa+vgkweE2EAdTU4hUZ8qEP7FQ smhYtlT1xUSTYDTqoaG/U2OWR6/UU79wP0jgcOsHXTuyYrtPI/Q= =VmXL -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore - Include TPIDR2 in the signal context and add the corresponding kselftests - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64 - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values) - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone - Further arm64 sysreg conversion and some fixes - arm64 kselftest fixes and improvements - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation - Pseudo-NMI code generation optimisations - Minor fixes for SME and TPIDR2 handling - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits) arm64: fix .idmap.text assertion for large kernels kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests kselftest/arm64: Copy whole EXTRA context arm64: kprobes: Drop ID map text from kprobes blacklist perf: arm_spe: Print the version of SPE detected perf: arm_spe: Add support for SPEv1.2 inverted event filtering perf: Add perf_event_attr::config3 arm64/sme: Fix __finalise_el2 SMEver check drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable arm64/signal: Only read new data when parsing the ZT context arm64/signal: Only read new data when parsing the ZA context arm64/signal: Only read new data when parsing the SVE context arm64/signal: Avoid rereading context frame sizes arm64/signal: Make interface for restore_fpsimd_context() consistent arm64/signal: Remove redundant size validation from parse_user_sigframe() arm64/signal: Don't redundantly verify FPSIMD magic arm64/cpufeature: Use helper macros to specify hwcaps arm64/cpufeature: Always use symbolic name for feature value in hwcaps arm64/sysreg: Initial unsigned annotations for ID registers arm64/sysreg: Initial annotation of signed ID registers ... |
||
Antonio Alvarez Feijoo
|
cf8c59a375 |
tools/bootconfig: fix single & used for logical condition
A single & will create a background process and return true, so the grep
command will run even if the file checked in the first condition does not
exist.
Link: https://lore.kernel.org/all/20230112114215.17103-1-antonio.feijoo@suse.com/
Fixes:
|
||
Phil Sutter
|
efb056e5f1 |
netfilter: ip6t_rpfilter: Fix regression with VRF interfaces
When calling ip6_route_lookup() for the packet arriving on the VRF
interface, the result is always the real (slave) interface. Expect this
when validating the result.
Fixes:
|
||
Linus Torvalds
|
eb6d5bbea2 |
m68k updates for v6.3
- Add seccomp support, - Defconfig updates, - Miscellaneous fixes and improvements. -----BEGIN PGP SIGNATURE----- iIsEABYIADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCY/NpwhUcZ2VlcnRAbGlu dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XB/LgD+OndW88TM184loE00WEECzgJjaOi6 /3MMHLp/KtjNuIMA/j5V3aM+s33rExNu7b14D1aXC4FYdB7VnMVJ+Xk2cHcH =xCVc -----END PGP SIGNATURE----- Merge tag 'm68k-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - Add seccomp support - defconfig updates - Miscellaneous fixes and improvements * tag 'm68k-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: /proc/hardware should depend on PROC_FS selftests/seccomp: Add m68k support m68k: Add kernel seccomp support m68k: Check syscall_trace_enter() return code m68k: defconfig: Update defconfigs for v6.2-rc3 m68k: q40: Do not initialise statics to 0 |
||
Linus Torvalds
|
877934769e |
- Cache the AMD debug registers in per-CPU variables to avoid MSR writes
where possible, when supporting a debug registers swap feature for SEV-ES guests - Add support for AMD's version of eIBRS called Automatic IBRS which is a set-and-forget control of indirect branch restriction speculation resources on privilege change - Add support for a new x86 instruction - LKGS - Load kernel GS which is part of the FRED infrastructure - Reset SPEC_CTRL upon init to accomodate use cases like kexec which rediscover - Other smaller fixes and cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmP1RDIACgkQEsHwGGHe VUohBw//ZB9ZRqsrKdm6D9YaP2x4Zb+kqKqo6rjYeWaYqyPyCwDujPwh+pb3Oq1t aj62muDv1t/wEJc8mKNkfXkjEEtBVAOcpb5YIpKreoEvNKyevol83Ih0u5iJcTRE E5qf8HDS8b/JZrcazJJLl6WQmQNH5RiKSu5bbCpRhoeOcyo5pRYR5MztK9vNmAQk GMdwHsUSU+jN8uiE4HnpaOb/luhgFindRwZVTpdjJegQWLABS8cl3CKeTv4+PW45 isvv37XnQP248wsptIEVRHeG6g3g/HtvwRx7DikUw06QwUyUK7H9hJssOoSP8TL9 u4psRwfWnJ1OxU6klL+s0Ii+pjQ97wXmK/oqK7QkdUwhWqR/mQAW2e9kWHAngyDn A6mKbzSM6HFAeSXQpB9cMb6uvYRD44SngDFe3WXtEK8jiiQ70ikUm4E28I5KJOPg s+RyioHk0NFRHYSOOBqNG1NKz6ED7L3GbgbbzxkgMh21AAyI3X351t+PtGoLV5ew eqOsM7lbg9Scg1LvPk1JcoALS8USWqgar397rz9qGUs+OkPWBtEBCmTdMz/Eb+2t g/WHdLS5/ajSs5gNhT99W3DeqZMPDEkgBRSeyBBmY3CUD3gBL2wXEktRXv504zBR RC4oyUPX3c9E2ib6GATLE3kBLbcz9hTWbMxF+X3lLJvTVd/Qc2o= =v/ZC -----END PGP SIGNATURE----- Merge tag 'x86_cpu_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpuid updates from Borislav Petkov: - Cache the AMD debug registers in per-CPU variables to avoid MSR writes where possible, when supporting a debug registers swap feature for SEV-ES guests - Add support for AMD's version of eIBRS called Automatic IBRS which is a set-and-forget control of indirect branch restriction speculation resources on privilege change - Add support for a new x86 instruction - LKGS - Load kernel GS which is part of the FRED infrastructure - Reset SPEC_CTRL upon init to accomodate use cases like kexec which rediscover - Other smaller fixes and cleanups * tag 'x86_cpu_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/amd: Cache debug register values in percpu variables KVM: x86: Propagate the AMD Automatic IBRS feature to the guest x86/cpu: Support AMD Automatic IBRS x86/cpu, kvm: Add the SMM_CTL MSR not present feature x86/cpu, kvm: Add the Null Selector Clears Base feature x86/cpu, kvm: Move X86_FEATURE_LFENCE_RDTSC to its native leaf x86/cpu, kvm: Add the NO_NESTED_DATA_BP feature KVM: x86: Move open-coded CPUID leaf 0x80000021 EAX bit propagation code x86/cpu, kvm: Add support for CPUID_80000021_EAX x86/gsseg: Add the new <asm/gsseg.h> header to <asm/asm-prototypes.h> x86/gsseg: Use the LKGS instruction if available for load_gs_index() x86/gsseg: Move load_gs_index() to its own new header file x86/gsseg: Make asm_load_gs_index() take an u16 x86/opcode: Add the LKGS instruction to x86-opcode-map x86/cpufeature: Add the CPU feature bit for LKGS x86/bugs: Reset speculation control settings on init x86/cpu: Remove redundant extern x86_read_arch_cap_msr() |
||
Linus Torvalds
|
1b72607d73 |
Thermal control updates for 6.3-rc1
- Rework a large bunch of drivers to use the generic thermal trip structure and use the opportunity to do more cleanups by removing unused functions from the OF code (Daniel Lezcano). - Remove core header inclusion from drivers (Daniel Lezcano). - Fix some locking issues related to the generic thermal trip rework (Johan Hovold). - Fix a crash when requesting the critical temperature on tegra, which is related to the generic trip point work (Jon Hunter). - Clean up thermal device unregistration code (Viresh Kumar). - Fix and clean up thermal control core initialization error code paths (Daniel Lezcano). - Relocate the trip points handling code into a separate file (Daniel Lezcano). - Make the thermal core fail registration of thermal zones and cooling devices if the thermal class has not been registered (Rafael Wysocki). - Add trip point initialization helper functions for ACPI-defined trip points and modify two thermal drivers to use them (Rafael Wysocki, Daniel Lezcano). - Make the core thermal control code use sysfs_emit_at() instead of scnprintf() where applicable (ye xingchen). - Consolidate code accessing the Intel TCC (Thermal Control Circuitry) MSRs by introducing library functions for that and making the TCC-related code in thermal drivers use them (Zhang Rui). - Enhance the x86_pkg_temp_thermal driver to support dynamic tjmax changes (Zhang Rui). - Address an "unsigned expression compared with zero" warning in the intel_soc_dts_iosf thermal driver (Yang Li). - Update comments regarding two functions in the Intel Menlow thermal driver (Deming Wang). - Use sysfs_emit_at() instead of scnprintf() in the int340x thermal driver (ye xingchen). - Make the intel_pch thermal driver support the Wellsburg PCH (Tim Zimmermann). - Modify the intel_pch and processor_thermal_device_pci thermal drivers use generic trip point tables instead of thermal zone trip point callbacks (Daniel Lezcano). - Add production mode attribute sysfs attribute to the int340x thermal driver (Srinivas Pandruvada). - Rework dynamic trip point updates handling and locking in the int340x thermal driver (Rafael Wysocki). - Make the int340x thermal driver use a generic trip points table instead of thermal zone trip point callbacks (Rafael Wysocki, Daniel Lezcano). - Clean up and improve the int340x thermal driver (Rafael Wysocki). - Simplify and clean up the intel_pch thermal driver (Rafael Wysocki). - Fix the Intel powerclamp thermal driver and make it use the common idle injection framework (Srinivas Pandruvada). - Add two module parameters, cpumask and max_idle, to the Intel powerclamp thermal driver to allow it to affect only a specific subset of CPUs instead of all of them (Srinivas Pandruvada). - Make the Intel quark_dts thermal driver Use generic trip point objects instead of its own trip point representation (Daniel Lezcano). - Add toctree entry for thermal documents and fix two issues in the Intel powerclamp driver documentation (Bagas Sanjaya). - Use strscpy() to instead of strncpy() in the thermal core (Xu Panda). - Fix thermal_sampling_exit() (Vincent Guittot). - Add Mediatek Low Voltage Thermal Sensor (LVTS) driver (Balsam Chihi). - Add r8a779g0 RCar support to the rcar_gen3 thermal driver (Geert Uytterhoeven). - Fix useless call to set_trips() when resuming in the rcar_gen3 thermal control driver and add interrupt support detection at init time to it (Niklas Söderlund). - Fix memory corruption in the hi3660 thermal driver (Yongqin Liu). - Fix include path for libnl3 in pkg-config file for libthermal (Vibhav Pant). - Remove syscfg-based driver for st as the platform is not supported any more (Alain Volmat). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmPuJuESHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRxef0P/3h73rPjGEyuDlvXaazyXsJ2ItIoGeXF v9sDwK3IPeFTNwAu80RySXQViOG6G1e5Cl8Ee+LuuMZfPRlBnr3n35BazejDDK0N u3YAhPqtNOvWqr31T3A27dYtK+feFR2QL9SGFP0E4yxS1jpMOSO4Q24z7yaXdegT hD8YT1HbTW4Cra7A17qdXsG8LkIe0+GQXy7Ig/Dul1eqXTM4RSReGTmXic66hGpv lutqIQl8VdjmVBcQtTustpdycAD9zj07xd9BvOyM0lmF90zt6S0VOWFDsk+8u1jA FCiuRLBAM1xbguxGubahTVOM051J/MdfM5WqGgPtesNIXlDq4Je2WUGC07jGvSfV DMjNNb+nTkD3BK+BEe+rgv3KZBngj4p2sGHFW19v3EPdGftzohqDD5Oqn0GpsKR0 J4GaT04T66A6jlNdzY/nPfOIw5FYEAsMwx4hR0qtEWDMT4uYtXQYM5iml9TBDoDx Kqyx+N8KhaKnQ4PLZ0MwtusyZydKQC1S1YK6G2eo+bXeJEre07FjZkiNfURi5gv9 lrKS5nbAGBqUrNV4XnS18RmGAC+bxuQrNA5Gr0ouYaaLMT+jGzcdu1yCMeWJxwZI fFGAwE6sOU8EtmdGJrQdJt4eKCnpzOS7I1XuMDTBstl8Wv92x/YbH39vOl9wbJVs rmSkM+4t+sXb =tZwm -----END PGP SIGNATURE----- Merge tag 'thermal-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "The majority of changes here are related to the general switch-over to using arrays of generic trip point structures registered along with a thermal zone instead of trip point callbacks (this has been done mostly by Daniel Lezcano with some help from yours truly on the Intel drivers front). Apart from that and the related reorganization of code, there are some enhancements of the existing driver and a new Mediatek Low Voltage Thermal Sensor (LVTS) driver. The Intel powerclamp undergoes a major rework so it will use the generic idle_inject facility for CPU idle time injection going forward and it will take additional module parameters for specifying the subset of CPUs to be affected by it (work done by Srinivas Pandruvada). Also included are assorted fixes and a whole bunch of cleanups. Specifics: - Rework a large bunch of drivers to use the generic thermal trip structure and use the opportunity to do more cleanups by removing unused functions from the OF code (Daniel Lezcano) - Remove core header inclusion from drivers (Daniel Lezcano) - Fix some locking issues related to the generic thermal trip rework (Johan Hovold) - Fix a crash when requesting the critical temperature on tegra, which is related to the generic trip point work (Jon Hunter) - Clean up thermal device unregistration code (Viresh Kumar) - Fix and clean up thermal control core initialization error code paths (Daniel Lezcano) - Relocate the trip points handling code into a separate file (Daniel Lezcano) - Make the thermal core fail registration of thermal zones and cooling devices if the thermal class has not been registered (Rafael Wysocki) - Add trip point initialization helper functions for ACPI-defined trip points and modify two thermal drivers to use them (Rafael Wysocki, Daniel Lezcano) - Make the core thermal control code use sysfs_emit_at() instead of scnprintf() where applicable (ye xingchen) - Consolidate code accessing the Intel TCC (Thermal Control Circuitry) MSRs by introducing library functions for that and making the TCC-related code in thermal drivers use them (Zhang Rui) - Enhance the x86_pkg_temp_thermal driver to support dynamic tjmax changes (Zhang Rui) - Address an "unsigned expression compared with zero" warning in the intel_soc_dts_iosf thermal driver (Yang Li) - Update comments regarding two functions in the Intel Menlow thermal driver (Deming Wang) - Use sysfs_emit_at() instead of scnprintf() in the int340x thermal driver (ye xingchen) - Make the intel_pch thermal driver support the Wellsburg PCH (Tim Zimmermann) - Modify the intel_pch and processor_thermal_device_pci thermal drivers use generic trip point tables instead of thermal zone trip point callbacks (Daniel Lezcano) - Add production mode attribute sysfs attribute to the int340x thermal driver (Srinivas Pandruvada) - Rework dynamic trip point updates handling and locking in the int340x thermal driver (Rafael Wysocki) - Make the int340x thermal driver use a generic trip points table instead of thermal zone trip point callbacks (Rafael Wysocki, Daniel Lezcano) - Clean up and improve the int340x thermal driver (Rafael Wysocki) - Simplify and clean up the intel_pch thermal driver (Rafael Wysocki) - Fix the Intel powerclamp thermal driver and make it use the common idle injection framework (Srinivas Pandruvada) - Add two module parameters, cpumask and max_idle, to the Intel powerclamp thermal driver to allow it to affect only a specific subset of CPUs instead of all of them (Srinivas Pandruvada) - Make the Intel quark_dts thermal driver Use generic trip point objects instead of its own trip point representation (Daniel Lezcano) - Add toctree entry for thermal documents and fix two issues in the Intel powerclamp driver documentation (Bagas Sanjaya) - Use strscpy() to instead of strncpy() in the thermal core (Xu Panda) - Fix thermal_sampling_exit() (Vincent Guittot) - Add Mediatek Low Voltage Thermal Sensor (LVTS) driver (Balsam Chihi) - Add r8a779g0 RCar support to the rcar_gen3 thermal driver (Geert Uytterhoeven) - Fix useless call to set_trips() when resuming in the rcar_gen3 thermal control driver and add interrupt support detection at init time to it (Niklas Söderlund) - Fix memory corruption in the hi3660 thermal driver (Yongqin Liu) - Fix include path for libnl3 in pkg-config file for libthermal (Vibhav Pant) - Remove syscfg-based driver for st as the platform is not supported any more (Alain Volmat)" * tag 'thermal-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (135 commits) thermal/drivers/st: Remove syscfg based driver thermal: Remove core header inclusion from drivers tools/lib/thermal: Fix include path for libnl3 in pkg-config file. thermal/drivers/hisi: Drop second sensor hi3660 thermal/drivers/rcar_gen3_thermal: Fix device initialization thermal/drivers/rcar_gen3_thermal: Create device local ops struct thermal/drivers/rcar_gen3_thermal: Do not call set_trips() when resuming thermal/drivers/rcar_gen3: Add support for R-Car V4H dt-bindings: thermal: rcar-gen3-thermal: Add r8a779g0 support thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver dt-bindings: thermal: mediatek: Add LVTS thermal controllers thermal/drivers/mediatek: Relocate driver to mediatek folder tools/lib/thermal: Fix thermal_sampling_exit() Documentation: powerclamp: Fix numbered lists formatting Documentation: powerclamp: Escape wildcard in cpumask description Documentation: admin-guide: Add toctree entry for thermal docs thermal: intel: powerclamp: Add two module parameters Documentation: admin-guide: Move intel_powerclamp documentation thermal: core: Use sysfs_emit_at() instead of scnprintf() thermal: intel: powerclamp: Fix duration module parameter ... |
||
Linus Torvalds
|
2504ba8b01 |
Power management updates for 6.3-rc1
- Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes Karny, Arnd Bergmann, Bagas Sanjaya). - Drop the custom cpufreq driver for loongson1 that is not necessary any more and the corresponding cpufreq platform device (Keguang Zhang). - Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig entries (Paul E. McKenney). - Enable thermal cooling for Tegra194 (Yi-Wei Wang). - Register module device table and add missing compatibles for cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss). - Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu (Christian Marangi). - Make kobj_type structure in the cpufreq core constant (Thomas Weißschuh). - Make cpufreq_unregister_driver() return void (Uwe Kleine-König). - Make the TEO cpuidle governor check CPU utilization in order to refine idle state selection (Kajetan Puchalski). - Make Kconfig select the haltpoll cpuidle governor when the haltpoll cpuidle driver is selected and replace a default_idle() call in that driver with arch_cpu_idle() to allow MWAIT to be used (Li RongQing). - Add Emerald Rapids Xeon support to the intel_idle driver (Artem Bityutskiy). - Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to avoid randconfig build failures (Arnd Bergmann). - Make kobj_type structures used in the cpuidle sysfs interface constant (Thomas Weißschuh). - Make the cpuidle driver registration code update microsecond values of idle state parameters in accordance with their nanosecond values if they are provided (Rafael Wysocki). - Make the PSCI cpuidle driver prevent topology CPUs from being suspended on PREEMPT_RT (Krzysztof Kozlowski). - Document that pm_runtime_force_suspend() cannot be used with DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald). - Add EXPORT macros for exporting PM functions from drivers (Richard Fitzgerald). - Remove /** from non-kernel-doc comments in hibernation code (Randy Dunlap). - Fix possible name leak in powercap_register_zone() (Yang Yingliang). - Add Meteor Lake and Emerald Rapids support to the intel_rapl power capping driver (Zhang Rui). - Modify the idle_inject power capping facility to support 100% idle injection (Srinivas Pandruvada). - Fix large time windows handling in the intel_rapl power capping driver (Zhang Rui). - Fix memory leaks with using debugfs_lookup() in the generic PM domains and Energy Model code (Greg Kroah-Hartman). - Add missing 'cache-unified' property in the example for kryo OPP bindings (Rob Herring). - Fix error checking in opp_migrate_dentry() (Qi Zheng). - Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad Dybcio). - Modify some power management utilities to use the canonical ftrace path (Ross Zwisler). - Correct spelling problems for Documentation/power/ as reported by codespell (Randy Dunlap). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmPuJfMSHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRx/5kQAJNOVImLEPLerLP8xufw30//LuDU5Gi0 STsyDOMql/I2MpkeqeCcgrSbpy6NlEglOvg16gfpQ3qqTCLF9ypENxs9E5BGGvW0 aEdCzvaoqmvi9PCr/jmj0EPP70/U+rIX5m/k0QdjLh9x0aLoAEe3uRJTfR9QVqXf I7JX0N9kjKi7YxpA5DlkHrS7J7GPPiWlesJ3p4wXuHMo3jf+6fgkoPFt8yRrGWeh AHzGT2BLrsy7aAUjGZB65Qx9q3fnSXMmXOjmn0Xh2njQah+zRZDwrNzwoY2HTLL/ KQ6/Ww16USYRZtCS1fmGwAj9I+ddq6AOvhPCMn0vLXXmKVAMUrVVWnQS/0+vpm9y suUMK9Tndkgxd1vjby2246ThJn27uDd/ERFan4ouQo2j22uICY+SDo3osj2hMXka wq4zthXkY8KgjZ+MuXnZxPhcOvo8KRvfxAU0fy5efQnSkbtwY9UlMvjPBMBHm/RA 21/6kjQNtq5vMmI37oC8DH+oPrRQ7sUKuY7HNqwO9P3QNKWVmNe7cF5UtXXxME7Q ULvP1d+u+TNNdHFLryPwCSzBO34wQEccdRZBjalZ8tBe6JiDWUFHC3giSURZSuzZ GDvzVaNX6PkgToyv4inBTB8lTp6pAuUjaWNvNJzVvUXiEKHB0ihzg5vpJW5NdwlH 15Tn8cjH7pp0 =lZLx -----END PGP SIGNATURE----- Merge tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add EPP support to the AMD P-state cpufreq driver, add support for new platforms to the Intel RAPL power capping driver, intel_idle and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194, drop the custom cpufreq driver for loongson1 that is not necessary any more (and the corresponding cpufreq platform device), fix assorted issues and clean up code. Specifics: - Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes Karny, Arnd Bergmann, Bagas Sanjaya) - Drop the custom cpufreq driver for loongson1 that is not necessary any more and the corresponding cpufreq platform device (Keguang Zhang) - Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig entries (Paul E. McKenney) - Enable thermal cooling for Tegra194 (Yi-Wei Wang) - Register module device table and add missing compatibles for cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss) - Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu (Christian Marangi) - Make kobj_type structure in the cpufreq core constant (Thomas Weißschuh) - Make cpufreq_unregister_driver() return void (Uwe Kleine-König) - Make the TEO cpuidle governor check CPU utilization in order to refine idle state selection (Kajetan Puchalski) - Make Kconfig select the haltpoll cpuidle governor when the haltpoll cpuidle driver is selected and replace a default_idle() call in that driver with arch_cpu_idle() to allow MWAIT to be used (Li RongQing) - Add Emerald Rapids Xeon support to the intel_idle driver (Artem Bityutskiy) - Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to avoid randconfig build failures (Arnd Bergmann) - Make kobj_type structures used in the cpuidle sysfs interface constant (Thomas Weißschuh) - Make the cpuidle driver registration code update microsecond values of idle state parameters in accordance with their nanosecond values if they are provided (Rafael Wysocki) - Make the PSCI cpuidle driver prevent topology CPUs from being suspended on PREEMPT_RT (Krzysztof Kozlowski) - Document that pm_runtime_force_suspend() cannot be used with DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald) - Add EXPORT macros for exporting PM functions from drivers (Richard Fitzgerald) - Remove /** from non-kernel-doc comments in hibernation code (Randy Dunlap) - Fix possible name leak in powercap_register_zone() (Yang Yingliang) - Add Meteor Lake and Emerald Rapids support to the intel_rapl power capping driver (Zhang Rui) - Modify the idle_inject power capping facility to support 100% idle injection (Srinivas Pandruvada) - Fix large time windows handling in the intel_rapl power capping driver (Zhang Rui) - Fix memory leaks with using debugfs_lookup() in the generic PM domains and Energy Model code (Greg Kroah-Hartman) - Add missing 'cache-unified' property in the example for kryo OPP bindings (Rob Herring) - Fix error checking in opp_migrate_dentry() (Qi Zheng) - Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad Dybcio) - Modify some power management utilities to use the canonical ftrace path (Ross Zwisler) - Correct spelling problems for Documentation/power/ as reported by codespell (Randy Dunlap)" * tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits) Documentation: amd-pstate: disambiguate user space sections cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables PM: Add EXPORT macros for exporting PM functions cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT MIPS: loongson32: Drop obsolete cpufreq platform device powercap: intel_rapl: Fix handling for large time window cpuidle: driver: Update microsecond values of state parameters as needed cpuidle: sysfs: make kobj_type structures constant cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies PM: EM: fix memory leak with using debugfs_lookup() PM: domains: fix memory leak with using debugfs_lookup() cpufreq: Make kobj_type structure constant cpufreq: davinci: Fix clk use after free cpufreq: amd-pstate: avoid uninitialized variable use cpufreq: Make cpufreq_unregister_driver() return void OPP: fix error checking in opp_migrate_dentry() dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible ... |
||
Linus Torvalds
|
8cc01d43f8 |
RCU pull request for v6.3
This pull request contains the following branches: doc.2023.01.05a: Documentation updates. fixes.2023.01.23a: Miscellaneous fixes, perhaps most notably: o Throttling callback invocation based on the number of callbacks that are now ready to invoke instead of on the total number of callbacks. o Several patches that suppress false-positive boot-time diagnostics, for example, due to lockdep not yet being initialized. o Make expedited RCU CPU stall warnings dump stacks of any tasks that are blocking the stalled grace period. (Normal RCU CPU stall warnings have doen this for mnay years.) o Lazy-callback fixes to avoid delays during boot, suspend, and resume. (Note that lazy callbacks must be explicitly enabled, so this should not (yet) affect production use cases.) kvfree.2023.01.03a: Cause kfree_rcu() and friends to take advantage of polled grace periods, thus reducing memory footprint by almost two orders of magnitude, admittedly on a microbenchmark. This series also begins the transition from kfree_rcu(p) to kfree_rcu_mightsleep(p). This transition was motivated by bugs where kfree_rcu(p), which can block, was typed instead of the intended kfree_rcu(p, rh). srcu.2023.01.03a: SRCU updates, perhaps most notably fixing a bug that causes SRCU to fail when booted on a system with a non-zero boot CPU. This surprising situation actually happens for kdump kernels on the powerpc architecture. It also adds an srcu_down_read() and srcu_up_read(), which act like srcu_read_lock() and srcu_read_unlock(), but allow an SRCU read-side critical section to be handed off from one task to another. srcu-always.2023.02.02a: Cleans up the now-useless SRCU Kconfig option. There are a few more commits that are not yet acked or pulled into maintainer trees, and these will be in a pull request for a later merge window. tasks.2023.01.03a: RCU-tasks updates, perhaps most notably these fixes: o A strange interaction between PID-namespace unshare and the RCU-tasks grace period that results in a low-probability but very real hang. o A race between an RCU tasks rude grace period on a single-CPU system and CPU-hotplug addition of the second CPU that can result in a too-short grace period. o A race between shrinking RCU tasks down to a single callback list and queuing a new callback to some other CPU, but where that queuing is delayed for more than an RCU grace period. This can result in that callback being stranded on the non-boot CPU. torture.2023.01.05a: Torture-test updates and fixes. torturescript.2023.01.03a: Torture-test scripting updates and fixes. stall.2023.01.09a: Provide additional RCU CPU stall-warning information in kernels built with CONFIG_RCU_CPU_STALL_CPUTIME=y, and restore the full five-minute timeout limit for expedited RCU CPU stall warnings. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmPq29UTHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jAhVEACEAKJY1VJ9IUqz7CwzAYkzgRJfiygh oDUXmlqtm6ew9pr2GdLUVCVsUSldzBc0K7Djb/G1niv4JPs+v7YwupIV33+UbStU Qxt6ztTdxc4lKospLm1+2vF9ZdzVEmiP4wVCc4iDarv5FM3FpWSTNc8+L7qmlC+X myjv+GqMTxkXZBvYJOgJGFjDwN8noTd7Fr3mCCVLFm3PXMDa7tcwD6HRP5AqD2N8 qC5M6LEqepKVGmz0mYMLlSN1GPaqIsEcexIFEazRsPEivPh/iafyQCQ/cqxwhXmV vEt7u+dXGZT/oiDq9cJ+/XRDS2RyKIS6dUE14TiiHolDCn1ONESahfA/gXWKykC2 BaGPfjWXrWv/hwbeZ+8xEdkAvTIV92tGpXir9Fby1Z5PjP3balvrnn6hs5AnQBJb NdhRPLzy/dCnEF+CweAYYm1qvTo8cd5nyiNwBZHn7rEAIu3Axrecag1rhFl3AJ07 cpVMQXZtkQVa2X8aIRTUC+ijX6yIqNaHlu0HqNXgIUTDzL4nv5cMjOMzpNQP9/dZ FwAMZYNiOk9IlMiKJ8ZiVcxeiA8ouIBlkYM3k6vGrmiONZ7a/EV/mSHoJqI8bvqr AxUIJ2Ayhg3bxPboL5oKgCiLql0A7ZVvz6quX6McitWGMgaSvel1fDzT3TnZd41e 4AFBFd/+VedUGg== =bBYK -----END PGP SIGNATURE----- Merge tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Documentation updates - Miscellaneous fixes, perhaps most notably: - Throttling callback invocation based on the number of callbacks that are now ready to invoke instead of on the total number of callbacks - Several patches that suppress false-positive boot-time diagnostics, for example, due to lockdep not yet being initialized - Make expedited RCU CPU stall warnings dump stacks of any tasks that are blocking the stalled grace period. (Normal RCU CPU stall warnings have done this for many years) - Lazy-callback fixes to avoid delays during boot, suspend, and resume. (Note that lazy callbacks must be explicitly enabled, so this should not (yet) affect production use cases) - Make kfree_rcu() and friends take advantage of polled grace periods, thus reducing memory footprint by almost two orders of magnitude, admittedly on a microbenchmark This also begins the transition from kfree_rcu(p) to kfree_rcu_mightsleep(p). This transition was motivated by bugs where kfree_rcu(p), which can block, was typed instead of the intended kfree_rcu(p, rh) - SRCU updates, perhaps most notably fixing a bug that causes SRCU to fail when booted on a system with a non-zero boot CPU. This surprising situation actually happens for kdump kernels on the powerpc architecture This also adds an srcu_down_read() and srcu_up_read(), which act like srcu_read_lock() and srcu_read_unlock(), but allow an SRCU read-side critical section to be handed off from one task to another - Clean up the now-useless SRCU Kconfig option There are a few more commits that are not yet acked or pulled into maintainer trees, and these will be in a pull request for a later merge window - RCU-tasks updates, perhaps most notably these fixes: - A strange interaction between PID-namespace unshare and the RCU-tasks grace period that results in a low-probability but very real hang - A race between an RCU tasks rude grace period on a single-CPU system and CPU-hotplug addition of the second CPU that can result in a too-short grace period - A race between shrinking RCU tasks down to a single callback list and queuing a new callback to some other CPU, but where that queuing is delayed for more than an RCU grace period. This can result in that callback being stranded on the non-boot CPU - Torture-test updates and fixes - Torture-test scripting updates and fixes - Provide additional RCU CPU stall-warning information in kernels built with CONFIG_RCU_CPU_STALL_CPUTIME=y, and restore the full five-minute timeout limit for expedited RCU CPU stall warnings * tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits) rcu/kvfree: Add kvfree_rcu_mightsleep() and kfree_rcu_mightsleep() kernel/notifier: Remove CONFIG_SRCU init: Remove "select SRCU" fs/quota: Remove "select SRCU" fs/notify: Remove "select SRCU" fs/btrfs: Remove "select SRCU" fs: Remove CONFIG_SRCU drivers/pci/controller: Remove "select SRCU" drivers/net: Remove "select SRCU" drivers/md: Remove "select SRCU" drivers/hwtracing/stm: Remove "select SRCU" drivers/dax: Remove "select SRCU" drivers/base: Remove CONFIG_SRCU rcu: Disable laziness if lazy-tracking says so rcu: Track laziness during boot and suspend rcu: Remove redundant call to rcu_boost_kthread_setaffinity() rcu: Allow up to five minutes expedited RCU CPU stall-warning timeouts rcu: Align the output of RCU CPU stall warning messages rcu: Add RCU stall diagnosis information sched: Add helper nr_context_switches_cpu() ... |
||
Jakub Kicinski
|
d1fabc68f8 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Per-next-PR merge. net/smc/af_smc.c |
||
Linus Torvalds
|
3f0b0903fd |
- Add getcpu support for the 32-bit version of the vDSO
- Some smaller fixes -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmPzusMACgkQEsHwGGHe VUojfQ/7BOqXI0XsHTIwilF12w2bLQl1PeI4bSk6VY+iAN2YmQkq2qvNUgwt62e5 5Z95cDuCZ8sx6L3mDIoOgWBN9zdLbxNhezLFDykb+6as67PMaww9l9R6n3JoC2qm ELso5JZnWvIZ7Cu7RRm9IzbSj93JAlN3Aypexe61NywMyge9CAvCiOEhvW+lkYSD lhZqgbm5WAB14F1CeqFyC8kVvUez1GH9Dunbe7ozk7LqRfTRlf5YPH88iE4UKzdg JXmbcHB2K4aQzfIW66OFPnl/4Cl+XxS/i5CR2NtWlB4/ANZBPoUr7QAS239OpC6u 3uwv/qPmMe7p/lYMaGXSUpzD/MOCHP1HPN8/CWgdyK+Mdmctpqr0FYh1qXXm1Nuu v0SE3btHVIB5UfvImoOlV/RfCx3+TqxzqUU2erc0iD5VxlRfrqJEwJdJHOgRGxFU vflRxMQOshhyI7+Q7et0S0QlgK4HvGEHmBUwBsUbfyptIxbqpOLK8INC6N8qwGKZ gTuBxLNZ5yRE/NeOVe0cL2ooelfOlg7GKUI+gZbfzzQw8M5WZW9qEDS9y2wIuGey wBFJNzjKXSkrTxc6Hd136N7DX7PlMjiJhXP42s+7rXJguPvgk1oVyEuaX540+xX4 HphXRC2QW0o0hCeFgP11Ai4oq/vRW1RFvdDimJjveJAv19bQNv0= =Wg/8 -----END PGP SIGNATURE----- Merge tag 'x86_vdso_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 vdso updates from Borislav Petkov: - Add getcpu support for the 32-bit version of the vDSO - Some smaller fixes * tag 'x86_vdso_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Fix -Wmissing-prototypes warnings x86/vdso: Fake 32bit VDSO build on 64bit compile for vgetcpu selftests: Emit a warning if getcpu() is missing on 32bit x86/vdso: Provide getcpu for x86-32. x86/cpu: Provide the full setup for getcpu() on x86-32 x86/vdso: Move VDSO image init to vdso2c generated code |
||
Linus Torvalds
|
1adce1b944 |
- Teach the static_call patching infrastructure to handle conditional
tall calls properly which can be static calls too - Add proper struct alt_instr.flags which controls different aspects of insn patching behavior -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmPzkAcACgkQEsHwGGHe VUpA3A//bALDnLosUQe/m8CTcj1AU12Y59fGInoLl5xArM3liOhRYWj9yu8+2r5N j+89yjWoiaogu/9B18pV0+VnBrFUbALZmHxec0+4VAWyMqYuTbqN28Nj/2cZiHdP I/9mwGu40I/Ira021D132EcdoZI7O/6bFlh+kEoAqxc7rsqhD5KKRMlrTTdEPVjH aRbWIuzqDWNhbi7IwfgEBIPLiQZQKmIdH5hsFMD6yOMIdMRL6CwKmXVg2M1Zp8ta 5v2Aqgvu2nZYCIteP4GQck2AlUBlGR4ClGQQRII+U1o8c9dM0hfcIDgsbSYKvgrY ANm9MQJaF7MRomk9y4E0EHPZAJEMLKUgiQXMxWpER3O1GOKgZPlyzNSe0gRCiL6O NZWZ2cGtdhQMrko4EapE3GNryM1HoCY/QCuD1fCYwoc/pRBDhCxsSqjWUd8G/6wn s3S/mD0v3nmTrxHg8sWvqhKshsd7B9V0LSkTpHktz3soFIJGXTxbrtty0CIS61pM 4iUMYB9SjunoEmdwC7+gCN3sCiRpRqfmIybqXdsW3d37QI+FM5aSBPw51xULubfY Wsxo8SkH+IMYxXmfbQuUppsGZ+1QHzU08+MrlvNxGHUjS1aMnsrFF/fbfbbCnWvX 7hcyBPT0jxc9RPMNeKDm4ItapMMGxGdv6XiRmM8LiUtVG2fMaW4= =XUqC -----END PGP SIGNATURE----- Merge tag 'x86_alternatives_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm alternatives updates from Borislav Petkov: - Teach the static_call patching infrastructure to handle conditional tall calls properly which can be static calls too - Add proper struct alt_instr.flags which controls different aspects of insn patching behavior * tag 'x86_alternatives_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/static_call: Add support for Jcc tail-calls x86/alternatives: Teach text_poke_bp() to patch Jcc.d32 instructions x86/alternatives: Introduce int3_emulate_jcc() x86/alternatives: Add alt_instr.flags |
||
Jason Gunthorpe
|
939204e4df |
Linux 6.2
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmPyoZYeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGcE0H/1imH5XOfowBdPQU p06pCJGKQyEsGnn+kXd7UXes9N/uZFQgOzY9sFspS1ZpXfm60zDcWCeJT2l3qatK dtmAGxTEBeZJ8JuevtBiedWy9pJPpvMsfeZd85XzGDRxNUnGT5HgU0/98NpIjysb 9HTPrpJO9HlmoAKkFDu+Z/kLJp+obns1yQOCH5glOREsPY+4SX76bjPjrbSic0oj oDSSBpM2gfdwHWnOKkXhgNuu8zr+hS3LaU1HMj6Kgy3Huz2NjGlgXrRpzutTHEmT cmt3Dl5hdIeUtMCt8LbQcngjTg/rX11rFdWaOp/MOuD6U7cqTCWeEDyVsPicFehH wdsIfgw= =+SoL -----END PGP SIGNATURE----- Merge tag 'v6.2' into iommufd.git for-next Resolve conflicts from the signature change in iommu_map: - drivers/infiniband/hw/usnic/usnic_uiom.c Switch iommu_map_atomic() to iommu_map(.., GFP_ATOMIC) - drivers/vfio/vfio_iommu_type1.c Following indenting change for GFP_KERNEL Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
Jiri Pirko
|
f922c7b1c1 |
sefltests: netdevsim: wait for devlink instance after netns removal
When devlink instance is put into network namespace and that network
namespace gets deleted, devlink instance is moved back into init_ns.
This is done as a part of cleanup_net() routine. Since cleanup_net()
is called asynchronously from workqueue, there is no guarantee that
the devlink instance move is done after "ip netns del" returns.
So fix this race by making sure that the devlink instance is present
before any other operation.
Reported-by: Amir Tzin <amirtz@nvidia.com>
Fixes:
|
||
Roxana Nicolescu
|
b60417a9f2 |
selftest: fib_tests: Always cleanup before exit
Usage of `set -e` before executing a command causes immediate exit
on failure, without cleanup up the resources allocated at setup.
This can affect the next tests that use the same resources,
leading to a chain of failures.
A simple fix is to always call cleanup function when the script exists.
This approach is already used by other existing tests.
Fixes:
|
||
Linus Torvalds
|
1f2d9ffc7a |
Scheduler updates in this cycle are:
- Improve the scalability of the CFS bandwidth unthrottling logic with large number of CPUs. - Fix & rework various cpuidle routines, simplify interaction with the generic scheduler code. Add __cpuidle methods as noinstr to objtool's noinstr detection and fix boatloads of cpuidle bugs & quirks. - Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query previously issued registrations. - Limit scheduler slice duration to the sysctl_sched_latency period, to improve scheduling granularity with a large number of SCHED_IDLE tasks. - Debuggability enhancement on sys_exit(): warn about disabled IRQs, but also enable them to prevent a cascade of followup problems and repeat warnings. - Fix the rescheduling logic in prio_changed_dl(). - Micro-optimize cpufreq and sched-util methods. - Micro-optimize ttwu_runnable() - Micro-optimize the idle-scanning in update_numa_stats(), select_idle_capacity() and steal_cookie_task(). - Update the RSEQ code & self-tests - Constify various scheduler methods - Remove unused methods - Refine __init tags - Documentation updates - ... Misc other cleanups, fixes Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmPzbJwRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1iIvA//ZcEaB8Z6ChLRQjM+bsaudKJu3pdLQbPK iYbP8Da+LsAfxbEfYuGV3m+jIp0LlBOtsI/EezxQrXV+V7FvNyAX9Y00eEu/zlj8 7Jn3LMy/DBYTwH7LwVdcU0MyIVI8ZPc6WNnkx0LOtGZn8n+qfHPSDzcP3CW+a5AV UvllPYpYyEmsX0Eby7CF4Ue8mSmbViw/xR3rNr8ZSve0c25XzKabw8O9kE3jiHxP d/zERJoAYeDyYUEuZqhfn5dTlB4an4IjNEkAfRE5SQ09RA8Gkxsa5Ar8gob9e9M1 eQsdd4/bdhnrkM8L5qDZczqmgCTZ2bukQrxkBXhRDhLgoFxwAn77b+2ZjmIW3Lae AyGqRcDSg1q2oxaYm5ZiuO/t26aDOZu9vPHyHRDGt95EGbZlrp+GgeePyfCigJYz UmPdZAAcHdSymnnnlcvdG37WVvaVkpgWZzd8LbtBi23QR+Zc4WQ2IlgnUS5WKNNf VOBcAcP6E1IslDotZDQCc2dPFFQoQQEssVooyUc5oMytm7BsvxXLOeHG+Ncu/8uc H+U8Qn8jnqTxJbC5hkWQIJlhVKCq2FJrHxxySYTKROfUNcDgCmxboFeAcXTCIU1K T0S+sdoTS/CvtLklRkG0j6B8N4N98mOd9cFwUV3tX+/gMLMep3hCQs5L76JagvC5 skkQXoONNaM= =l1nN -----END PGP SIGNATURE----- Merge tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - Improve the scalability of the CFS bandwidth unthrottling logic with large number of CPUs. - Fix & rework various cpuidle routines, simplify interaction with the generic scheduler code. Add __cpuidle methods as noinstr to objtool's noinstr detection and fix boatloads of cpuidle bugs & quirks. - Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query previously issued registrations. - Limit scheduler slice duration to the sysctl_sched_latency period, to improve scheduling granularity with a large number of SCHED_IDLE tasks. - Debuggability enhancement on sys_exit(): warn about disabled IRQs, but also enable them to prevent a cascade of followup problems and repeat warnings. - Fix the rescheduling logic in prio_changed_dl(). - Micro-optimize cpufreq and sched-util methods. - Micro-optimize ttwu_runnable() - Micro-optimize the idle-scanning in update_numa_stats(), select_idle_capacity() and steal_cookie_task(). - Update the RSEQ code & self-tests - Constify various scheduler methods - Remove unused methods - Refine __init tags - Documentation updates - Misc other cleanups, fixes * tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits) sched/rt: pick_next_rt_entity(): check list_entry sched/deadline: Add more reschedule cases to prio_changed_dl() sched/fair: sanitize vruntime of entity being placed sched/fair: Remove capacity inversion detection sched/fair: unlink misfit task from cpu overutilized objtool: mem*() are not uaccess safe cpuidle: Fix poll_idle() noinstr annotation sched/clock: Make local_clock() noinstr sched/clock/x86: Mark sched_clock() noinstr x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read() x86/atomics: Always inline arch_atomic64*() cpuidle: tracing, preempt: Squash _rcuidle tracing cpuidle: tracing: Warn about !rcu_is_watching() cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG cpuidle: drivers: firmware: psci: Dont instrument suspend code KVM: selftests: Fix build of rseq test exit: Detect and fix irq disabled state in oops cpuidle, arm64: Fix the ARM64 cpuidle logic cpuidle: mvebu: Fix duplicate flags assignment sched/fair: Limit sched slice duration ... |
||
Jakub Kicinski
|
ee8d72a157 |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY+/uBgAKCRDbK58LschI g0ngAPwJHd1RicBuy2C4fLv0nGKZtmYZBAnTGlI2RisPxU6BRwEAwUDLHuc5K6nR j261okOxOy/MRxdN1NhmR6Qe7nMyQAk= =tYU+ -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2023-02-17 We've added 64 non-merge commits during the last 7 day(s) which contain a total of 158 files changed, 4190 insertions(+), 988 deletions(-). The main changes are: 1) Add a rbtree data structure following the "next-gen data structure" precedent set by recently-added linked-list, that is, by using kfunc + kptr instead of adding a new BPF map type, from Dave Marchevsky. 2) Add a new benchmark for hashmap lookups to BPF selftests, from Anton Protopopov. 3) Fix bpf_fib_lookup to only return valid neighbors and add an option to skip the neigh table lookup, from Martin KaFai Lau. 4) Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accouting for container environments, from Yafang Shao. 5) Batch of ice multi-buffer and driver performance fixes, from Alexander Lobakin. 6) Fix a bug in determining whether global subprog's argument is PTR_TO_CTX, which is based on type names which breaks kprobe progs, from Andrii Nakryiko. 7) Prep work for future -mcpu=v4 LLVM option which includes usage of BPF_ST insn. Thus improve BPF_ST-related value tracking in verifier, from Eduard Zingerman. 8) More prep work for later building selftests with Memory Sanitizer in order to detect usages of undefined memory, from Ilya Leoshkevich. 9) Fix xsk sockets to check IFF_UP earlier to avoid a NULL pointer dereference via sendmsg(), from Maciej Fijalkowski. 10) Implement BPF trampoline for RV64 JIT compiler, from Pu Lehui. 11) Fix BPF memory allocator in combination with BPF hashtab where it could corrupt special fields e.g. used in bpf_spin_lock, from Hou Tao. 12) Fix LoongArch BPF JIT to always use 4 instructions for function address so that instruction sequences don't change between passes, from Hengqi Chen. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (64 commits) selftests/bpf: Add bpf_fib_lookup test bpf: Add BPF_FIB_LOOKUP_SKIP_NEIGH for bpf_fib_lookup riscv, bpf: Add bpf trampoline support for RV64 riscv, bpf: Add bpf_arch_text_poke support for RV64 riscv, bpf: Factor out emit_call for kernel and bpf context riscv: Extend patch_text for multiple instructions Revert "bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES" selftests/bpf: Add global subprog context passing tests selftests/bpf: Convert test_global_funcs test to test_loader framework bpf: Fix global subprog context argument resolution logic LoongArch, bpf: Use 4 instructions for function address in JIT bpf: bpf_fib_lookup should not return neigh in NUD_FAILED state bpf: Disable bh in bpf_test_run for xdp and tc prog xsk: check IFF_UP earlier in Tx path Fix typos in selftest/bpf files selftests/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd() samples/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd() bpftool: Use bpf_{btf,link,map,prog}_get_info_by_fd() libbpf: Use bpf_{btf,link,map,prog}_get_info_by_fd() libbpf: Introduce bpf_{btf,link,map,prog}_get_info_by_fd() ... ==================== Link: https://lore.kernel.org/r/20230217221737.31122-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Shunsuke Mie
|
0d0ed40061 |
tools/virtio: enable to build with retpoline
Add build options to bring it close to a linux kernel. It allows for testing that is close to reality. Signed-off-by: Shunsuke Mie <mie@igel.co.jp> Message-Id: <20230202104538.2041879-1-mie@igel.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
Donglin Peng
|
8478cca1e3 |
tracing/probe: add a char type to show the character value of traced arguments
There are scenes that we want to show the character value of traced arguments other than a decimal or hexadecimal or string value for debug convinience. I add a new type named 'char' to do it and a new test case file named 'kprobe_args_char.tc' to do selftest for char type. For example: The to be traced function is 'void demo_func(char type, char *name);', we can add a kprobe event as follows to show argument values as we want: echo 'p:myprobe demo_func $arg1:char +0($arg2):char[5]' > kprobe_events we will get the following trace log: ... myprobe: (demo_func+0x0/0x29) arg1='A' arg2={'b','p','f','1',''} Link: https://lore.kernel.org/all/20221219110613.367098-1-dolinux.peng@gmail.com/ Signed-off-by: Donglin Peng <dolinux.peng@gmail.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> |
||
Masami Hiramatsu (Google)
|
96cd93af79 |
selftests/ftrace: Fix probepoint testcase to ignore __pfx_* symbols
Fix kprobe probepoint testcase to ignore __pfx_* prefix symbols. Those are introduced by commit |
||
Masami Hiramatsu (Google)
|
a457e944df |
selftests/ftrace: Fix eprobe syntax test case to check filter support
Fix eprobe syntax test case to check whether the kernel supports the filter
on eprobe for filter syntax test command. Without this fix, this test case
will fail if the kernel supports eprobe but doesn't support the filter on
eprobe.
Link: https://lore.kernel.org/all/167309834742.640500.379128668288448035.stgit@devnote3/
Fixes:
|
||
Arnd Bergmann
|
d5d4692472 |
objtool: add UACCESS exceptions for __tsan_volatile_read/write
A lot of the tsan helpers are already excempt from the UACCESS warnings,
but some more functions were added that need the same thing:
kernel/kcsan/core.o: warning: objtool: __tsan_volatile_read16+0x0: call to __tsan_unaligned_read16() with UACCESS enabled
kernel/kcsan/core.o: warning: objtool: __tsan_volatile_write16+0x0: call to __tsan_unaligned_write16() with UACCESS enabled
vmlinux.o: warning: objtool: __tsan_unaligned_volatile_read16+0x4: call to __tsan_unaligned_read16() with UACCESS enabled
vmlinux.o: warning: objtool: __tsan_unaligned_volatile_write16+0x4: call to __tsan_unaligned_write16() with UACCESS enabled
As Marco points out, these functions don't even call each other
explicitly but instead gcc (but not clang) notices the functions
being identical and turns one symbol into a direct branch to the
other.
Link: https://lkml.kernel.org/r/20230215130058.3836177-4-arnd@kernel.org
Fixes:
|
||
Linus Torvalds
|
05e6295f7b |
fs.idmapped.v6.3
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY+5NlQAKCRCRxhvAZXjc
orOaAP9i2h3OJy95nO2Fpde0Bt2UT+oulKCCcGlvXJ8/+TQpyQD/ZQq47gFQ0EAz
Br5NxeyGeecAb0lHpFz+CpLGsxMrMwQ=
=+BG5
-----END PGP SIGNATURE-----
Merge tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs idmapping updates from Christian Brauner:
- Last cycle we introduced the dedicated struct mnt_idmap type for
mount idmapping and the required infrastucture in
|
||
Masami Hiramatsu (Google)
|
7dc8e24f0e |
ktest: Restore stty setting at first in dodie
The do_send_email() will call die before restoring stty if sendmail setting is not correct or sendmail is not installed. It is safer to restore it in the beginning of dodie(). Link: https://lkml.kernel.org/r/167420617635.2988775.13045295332829029437.stgit@devnote3 Cc: John 'Warthog9' Hawley <warthog9@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> |
||
Steven Rostedt
|
4e7d2a8f0b |
ktest.pl: Add RUN_TIMEOUT option with default unlimited
There is a disconnect between the run_command function and the
wait_for_input. The wait_for_input has a default timeout of 2 minutes. But
if that happens, the run_command loop will exit out to the waitpid() of
the executing command. This fails in that it no longer monitors the
command, and also, the ssh to the test box can hang when its finished, as
it's waiting for the pipe it's writing to to flush, but the loop that
reads that pipe has already exited, leaving the command stuck, and the
test hangs.
Instead, make the default "wait_for_input" of the run_command infinite,
and allow the user to override it if they want with a default timeout
option "RUN_TIMEOUT".
But this fixes the hang that happens when the pipe is full and the ssh
session never exits.
Cc: stable@vger.kernel.org
Fixes:
|
||
Steven Rostedt
|
83d29d439c |
ktest.pl: Give back console on Ctrt^C on monitor
When monitoring the console output, the stdout is being redirected to do
so. If Ctrl^C is hit during this mode, the stdout is not back to the
console, the user does not see anything they type (no echo).
Add "end_monitor" to the SIGINT interrupt handler to give back the console
on Ctrl^C.
Cc: stable@vger.kernel.org
Fixes:
|
||
Steven Rostedt
|
e8bf9b98d4 |
ktest.pl: Fix missing "end_monitor" when machine check fails
In the "reboot" command, it does a check of the machine to see if it is
still alive with a simple "ssh echo" command. If it fails, it will assume
that a normal "ssh reboot" is not possible and force a power cycle.
In this case, the "start_monitor" is executed, but the "end_monitor" is
not, and this causes the screen will not be given back to the console. That
is, after the test, a "reset" command needs to be performed, as "echo" is
turned off.
Cc: stable@vger.kernel.org
Fixes:
|
||
Paolo Abeni
|
3a7d84eae0 |
self-tests: more rps self tests
Explicitly check for child netns and main ns independency Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Paolo Bonzini
|
4090871d77 |
KVM/arm64 updates for 6.3
- Provide a virtual cache topology to the guest to avoid inconsistencies with migration on heterogenous systems. Non secure software has no practical need to traverse the caches by set/way in the first place. - Add support for taking stage-2 access faults in parallel. This was an accidental omission in the original parallel faults implementation, but should provide a marginal improvement to machines w/o FEAT_HAFDBS (such as hardware from the fruit company). - A preamble to adding support for nested virtualization to KVM, including vEL2 register state, rudimentary nested exception handling and masking unsupported features for nested guests. - Fixes to the PSCI relay that avoid an unexpected host SVE trap when resuming a CPU when running pKVM. - VGIC maintenance interrupt support for the AIC - Improvements to the arch timer emulation, primarily aimed at reducing the trap overhead of running nested. - Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the interest of CI systems. - Avoid VM-wide stop-the-world operations when a vCPU accesses its own redistributor. - Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions in the host. - Aesthetic and comment/kerneldoc fixes - Drop the vestiges of the old Columbia mailing list and add myself as co-maintainer This also drags in a couple of branches to avoid conflicts: - The shared 'kvm-hw-enable-refactor' branch that reworks initialization, as it conflicted with the virtual cache topology changes. - arm64's 'for-next/sme2' branch, as the PSCI relay changes, as both touched the EL2 initialization code. -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmPw29cPHG1hekBrZXJu ZWwub3JnAAoJECPQ0LrRPXpD9doQAIJyMW0odT6JBe15uGCxTuTnJbb8mniajJdX CuSxPl85WyKLtZbIJLRTQgyt6Nzbu0N38zM0y/qBZT5BvAnWYI8etvnJhYZjooAy jrf0Me/GM5hnORXN+1dByCmlV+DSuBkax86tgIC7HhU71a2SWpjlmWQi/mYvQmIK PBAqpFF+w2cWHi0ZvCq96c5EXBdN4FLEA5cdZhekCbgw1oX8+x+HxdpBuGW5lTEr 9oWOzOzJQC1uFnjP3unFuIaG94QIo+NA4aGLMzfb7wm2wdQUnKebtdj/RxsDZOKe 43Q1+MDFWMsxxFu4FULH8fPMwidIm5rfz3pw3JJloqaZp8vk/vjDLID7AYucMIX8 1G/mjqz6E9lYvv57WBmBhT/+apSDAmeHlAT97piH73Nemga91esDKuHSdtA8uB5j mmzcUYajuB2GH9rsaXJhVKt/HW7l9fbGliCkI99ckq/oOTO9VsKLsnwS/rMRIsPn y2Y8Lyoe4eqokd1DNn5/bo+3qDnfmzm6iDmZOo+JYuJv9KS95zuw17Wu7la9UAPV e13+btoijHDvu8RnTecuXljWfAAKVtEjpEIoS5aP2R2iDvhr0d8POlMPaJ40YuRq D2fKr18b6ngt+aI0TY63/ksEIFexx67HuwQsUZ2lRjyjq5/x+u3YIqUPbKrU4Rnl uxXjSvyr =r4s/ -----END PGP SIGNATURE----- Merge tag 'kvmarm-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for 6.3 - Provide a virtual cache topology to the guest to avoid inconsistencies with migration on heterogenous systems. Non secure software has no practical need to traverse the caches by set/way in the first place. - Add support for taking stage-2 access faults in parallel. This was an accidental omission in the original parallel faults implementation, but should provide a marginal improvement to machines w/o FEAT_HAFDBS (such as hardware from the fruit company). - A preamble to adding support for nested virtualization to KVM, including vEL2 register state, rudimentary nested exception handling and masking unsupported features for nested guests. - Fixes to the PSCI relay that avoid an unexpected host SVE trap when resuming a CPU when running pKVM. - VGIC maintenance interrupt support for the AIC - Improvements to the arch timer emulation, primarily aimed at reducing the trap overhead of running nested. - Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the interest of CI systems. - Avoid VM-wide stop-the-world operations when a vCPU accesses its own redistributor. - Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions in the host. - Aesthetic and comment/kerneldoc fixes - Drop the vestiges of the old Columbia mailing list and add [Oliver] as co-maintainer This also drags in arm64's 'for-next/sme2' branch, because both it and the PSCI relay changes touch the EL2 initialization code. |
||
Jakub Sitnicki
|
436864095a |
selftests/net: Interpret UDP_GRO cmsg data as an int value
Data passed to user-space with a (SOL_UDP, UDP_GRO) cmsg carries an
int (see udp_cmsg_recv), not a u16 value, as strace confirms:
recvmsg(8, {msg_name=...,
msg_iov=[{iov_base="\0\0..."..., iov_len=96000}],
msg_iovlen=1,
msg_control=[{cmsg_len=20, <-- sizeof(cmsghdr) + 4
cmsg_level=SOL_UDP,
cmsg_type=0x68}], <-- UDP_GRO
msg_controllen=24,
msg_flags=0}, 0) = 11200
Interpreting the data as an u16 value won't work on big-endian platforms.
Since it is too late to back out of this API decision [1], fix the test.
[1]: https://lore.kernel.org/netdev/20230131174601.203127-1-jakub@cloudflare.com/
Fixes:
|
||
Ross Zwisler
|
2455f0e124 |
tracing: Always use canonical ftrace path
The canonical location for the tracefs filesystem is at /sys/kernel/tracing. But, from Documentation/trace/ftrace.rst: Before 4.1, all ftrace tracing control files were within the debugfs file system, which is typically located at /sys/kernel/debug/tracing. For backward compatibility, when mounting the debugfs file system, the tracefs file system will be automatically mounted at: /sys/kernel/debug/tracing Many comments and Kconfig help messages in the tracing code still refer to this older debugfs path, so let's update them to avoid confusion. Link: https://lore.kernel.org/linux-trace-kernel/20230215223350.2658616-2-zwisler@google.com Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Martin KaFai Lau
|
168de02335 |
selftests/bpf: Add bpf_fib_lookup test
This patch tests the bpf_fib_lookup helper when looking up a neigh in NUD_FAILED and NUD_STALE state. It also adds test for the new BPF_FIB_LOOKUP_SKIP_NEIGH flag. Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230217205515.3583372-2-martin.lau@linux.dev |
||
Martin KaFai Lau
|
31de4105f0 |
bpf: Add BPF_FIB_LOOKUP_SKIP_NEIGH for bpf_fib_lookup
The bpf_fib_lookup() also looks up the neigh table. This was done before bpf_redirect_neigh() was added. In the use case that does not manage the neigh table and requires bpf_fib_lookup() to lookup a fib to decide if it needs to redirect or not, the bpf prog can depend only on using bpf_redirect_neigh() to lookup the neigh. It also keeps the neigh entries fresh and connected. This patch adds a bpf_fib_lookup flag, SKIP_NEIGH, to avoid the double neigh lookup when the bpf prog always call bpf_redirect_neigh() to do the neigh lookup. The params->smac output is skipped together when SKIP_NEIGH is set because bpf_redirect_neigh() will figure out the smac also. Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230217205515.3583372-1-martin.lau@linux.dev |
||
Martin KaFai Lau
|
181127fb76 |
Revert "bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES"
This reverts commit
|
||
Kajol Jain
|
f9fa0778ee |
perf tests stat_all_metrics: Change true workload to sleep workload for system wide check
Testcase stat_all_metrics.sh fails in powerpc: 98: perf all metrics test : FAILED! Logs with verbose: [command]# ./perf test 98 -vv 98: perf all metrics test : --- start --- test child forked, pid 13262 Testing BRU_STALL_CPI Testing COMPLETION_STALL_CPI ---- Testing TOTAL_LOCAL_NODE_PUMPS_P23 Metric 'TOTAL_LOCAL_NODE_PUMPS_P23' not printed in: Error: Invalid event (hv_24x7/PM_PB_LNS_PUMP23,chip=3/) in per-thread mode, enable system wide with '-a'. Testing TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01 Metric 'TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01' not printed in: Error: Invalid event (hv_24x7/PM_PB_RTY_LNS_PUMP01,chip=3/) in per-thread mode, enable system wide with '-a'. ---- Based on above logs, we could see some of the hv-24x7 metric events fails, and logs suggest to run the metric event with -a option. This change happened after the commit |
||
Andrii Nakryiko
|
e2b5cfc978 |
selftests/bpf: Add global subprog context passing tests
Add tests validating that it's possible to pass context arguments into global subprogs for various types of programs, including a particularly tricky KPROBE programs (which cover kprobes, uprobes, USDTs, a vast and important class of programs). Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20230216045954.3002473-4-andrii@kernel.org |
||
Andrii Nakryiko
|
95ebb37617 |
selftests/bpf: Convert test_global_funcs test to test_loader framework
Convert 17 test_global_funcs subtests into test_loader framework for easier maintenance and more declarative way to define expected failures/successes. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20230216045954.3002473-3-andrii@kernel.org |
||
Athira Rajeev
|
cf26e043c2 |
perf vendor events power10: Add JSON metric events to present CPI stall cycles in powerpc
Power10 Performance Monitoring Unit (PMU) provides events to understand stall cycles of different pipeline stages. These events along with completed instructions provides useful metrics for application tuning. Patch implements the JSON changes to collect counter statistics to present the high level CPI stall breakdown metrics. New metric group is named as "CPI_STALL_RATIO" and this new metric group presents these stall metrics: - DISPATCHED_CPI ( Dispatch stall cycles per insn ) - ISSUE_STALL_CPI ( Issue stall cycles per insn ) - EXECUTION_STALL_CPI ( Execution stall cycles per insn ) - COMPLETION_STALL_CPI ( Completition stall cycles per insn ) To avoid multipling of events, PM_RUN_INST_CMPL event has been modified to use PMC5(performance monitoring counter5) instead of PMC4. This change is needed, since completion stall event is using PMC4. Usage example: ./perf stat --metric-no-group -M CPI_STALL_RATIO <workload> Performance counter stats for 'workload': 63,056,817,982 PM_CMPL_STALL # 0.28 COMPLETION_STALL_CPI 1,743,988,038,896 PM_ISSUE_STALL # 7.73 ISSUE_STALL_CPI 225,597,495,030 PM_RUN_INST_CMPL # 6.18 DISPATCHED_CPI # 37.48 EXECUTION_STALL_CPI 1,393,916,546,654 PM_DISP_STALL_CYC 8,455,376,836,463 PM_EXEC_STALL "--metric-no-group" is used for forcing PM_RUN_INST_CMPL to be scheduled in all group for more accuracy. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Disha Goel <disgoel@linux.ibm.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230216061240.18067-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Steinar H. Gunderson
|
7e55b95651 |
perf intel-pt: Synthesize cycle events
There is no good reason why we cannot synthesize "cycle" events from Intel PT just as we can synthesize "instruction" events, in particular when CYC packets are available. This enables using PT to getting much more accurate cycle profiles than regular sampling (record -e cycles) when the work last for very short periods (<10 ms). Thus, add support for this, based off of the existing IPC calculation framework. The new option to --itrace is "y" (for cYcles), as c was taken for calls. Cycle and instruction events can be synthesized together, and are by default. The only real caveat is that CYC packets are only emitted whenever some other packet is, which in practice is when a branch instruction is encountered (and not even all branches). Thus, even at no subsampling (e.g. --itrace=y0ns), it is impossible to get more accuracy than a single basic block, and all cycles spent executing that block will get attributed to the branch instruction that ends the packet. Thus, one cannot know whether the cycles came from e.g. a specific load, a mispredicted branch, or something else. When subsampling (which is the default), the cycle events will get smeared out even more, but will still be generally useful to attribute cycle counts to functions. Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Steinar H. Gunderson <sesse@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220322082452.1429091-1-sesse@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
David S. Miller
|
675f176b4d |
Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net
Some of the devlink bits were tricky, but I think I got it right. Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Taichi Nishimura
|
df71a42cc3 |
Fix typos in selftest/bpf files
Run spell checker on files in selftest/bpf and fixed typos. Signed-off-by: Taichi Nishimura <awkrail01@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/bpf/20230216085537.519062-1-awkrail01@gmail.com |
||
Ilya Leoshkevich
|
c5a237a4db |
selftests/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()
Use the new type-safe wrappers around bpf_obj_get_info_by_fd(). Fix a prog/map mixup in prog_holds_map(). Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230214231221.249277-6-iii@linux.ibm.com |
||
Ilya Leoshkevich
|
38f0408ef7 |
bpftool: Use bpf_{btf,link,map,prog}_get_info_by_fd()
Use the new type-safe wrappers around bpf_obj_get_info_by_fd(). Split the bpf_obj_get_info_by_fd() call in build_btf_type_table() in two, since knowing the type helps with the Memory Sanitizer. Improve map_parse_fd_and_info() type safety by using struct bpf_map_info * instead of void * for info. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20230214231221.249277-4-iii@linux.ibm.com |
||
Ilya Leoshkevich
|
629dfc660c |
libbpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()
Use the new type-safe wrappers around bpf_obj_get_info_by_fd(). Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230214231221.249277-3-iii@linux.ibm.com |
||
Ilya Leoshkevich
|
55a9ed0e16 |
libbpf: Introduce bpf_{btf,link,map,prog}_get_info_by_fd()
These are type-safe wrappers around bpf_obj_get_info_by_fd(). They found one problem in selftests, and are also useful for adding Memory Sanitizer annotations. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230214231221.249277-2-iii@linux.ibm.com |
||
Linus Torvalds
|
3ac88fa460 |
Fixes from the main networking tree only.
Current release - regressions: - fix unwanted sign extension in netdev_stats_to_stats64() Current release - new code bugs: - initialize net->notrefcnt_tracker earlier - devlink: fix netdev notifier chain corruption - nfp: make sure mbox accesses in IPsec code are atomic - ice: fix check for weight and priority of a scheduling node Previous releases - regressions: - ice: xsk: fix cleaning of XDP_TX frame, prevent inf loop - igb: fix I2C bit banging config with external thermal sensor Previous releases - always broken: - sched: tcindex: update imperfect hash filters respecting rcu - mpls: fix stale pointer if allocation fails during device rename - dccp/tcp: avoid negative sk_forward_alloc by ipv6_pinfo.pktoptions - remove WARN_ON_ONCE(sk->sk_forward_alloc) from sk_stream_kill_queues() - af_key: fix heap information leak - ipv6: fix socket connection with DSCP (correct interpretation of the tclass field vs fib rule matching) - tipc: fix kernel warning when sending SYN message - vmxnet3: read RSS information from the correct descriptor (eop) Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmPueVYACgkQMUZtbf5S IrudBg/9ENOTSK4LeUE0If6Mr/DBUje6OwUX29/prxJz+PfU+XTNZqFf9xfVC5tX FnRAf7SxC4d4hmaA7JdOTFMyyDyZqQP1t13s0FSWAa5VbW3pnrqOXTyxCc9g3cZk 7m2co3XTH/U0FnbAZ6uzaoz7/NU+7UHYMVo5bCwLgB6YB31JWIcyTYKdYzl+xBFX y0GNkLLDJOo6cSpA5VRDMit42XmIUk1C4uuMPN0M6Q2U2xnYg2nYqlSXvaW2Y9CN NZgCCTp3AcKNqTU4zpjR6eyHK0xNgSCT4WJlx2tbnErdEo6gf8/Kw0PbbYAe/euk hgZQ0I8JxujskJFuA7S4u+VaPG92ycAyKMZFIucwepKSqtAjjA+XxTs8jxyVJIwZ +jwHnayEomlgnel+q+hE+XkNg3OdengTaudWn3vO2EtJrWyZh3nVP2krgxFlh8vY qwSqhSiXi+sjxspYgeIyyu2XGfWdY1sKNRgkGqisTyfBIMRK/jRhas5kyKOAOiYo 32xuvXzVouxXipVZhE5RVoR1VpeKl6OXlCIVVDvT6el2Y5bkbEmkCgEyIPfv1xBX 17C9a1IhvTfHU8uJ11Mbi7jxRCC3ELi7JHNdht0/WZtdVNppcwALuK+xGjHwR67H VWwWKO/M/ggd2OF1jW9eLzcJIixxCJjpu+VJFImd8aIUUw0LKy8= =r2l1 -----END PGP SIGNATURE----- Merge tag 'net-6.2-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Fixes from the main networking tree only, probably because all sub-trees have backed off and haven't submitted their changes. None of the fixes here are particularly scary and no outstanding regressions. In an ideal world the "current release" sections would be empty at this stage but that never happens. Current release - regressions: - fix unwanted sign extension in netdev_stats_to_stats64() Current release - new code bugs: - initialize net->notrefcnt_tracker earlier - devlink: fix netdev notifier chain corruption - nfp: make sure mbox accesses in IPsec code are atomic - ice: fix check for weight and priority of a scheduling node Previous releases - regressions: - ice: xsk: fix cleaning of XDP_TX frame, prevent inf loop - igb: fix I2C bit banging config with external thermal sensor Previous releases - always broken: - sched: tcindex: update imperfect hash filters respecting rcu - mpls: fix stale pointer if allocation fails during device rename - dccp/tcp: avoid negative sk_forward_alloc by ipv6_pinfo.pktoptions - remove WARN_ON_ONCE(sk->sk_forward_alloc) from sk_stream_kill_queues() - af_key: fix heap information leak - ipv6: fix socket connection with DSCP (correct interpretation of the tclass field vs fib rule matching) - tipc: fix kernel warning when sending SYN message - vmxnet3: read RSS information from the correct descriptor (eop)" * tag 'net-6.2-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits) devlink: Fix netdev notifier chain corruption igb: conditionalize I2C bit banging on external thermal sensor support net: mpls: fix stale pointer if allocation fails during device rename net/sched: tcindex: search key must be 16 bits tipc: fix kernel warning when sending SYN message igb: Fix PPS input and output using 3rd and 4th SDP net: use a bounce buffer for copying skb->mark ixgbe: add double of VLAN header when computing the max MTU i40e: add double of VLAN header when computing the max MTU ixgbe: allow to increase MTU to 3K with XDP enabled net: stmmac: Restrict warning on disabling DMA store and fwd mode net/sched: act_ctinfo: use percpu stats net: stmmac: fix order of dwmac5 FlexPPS parametrization sequence ice: fix lost multicast packets in promisc mode ice: Fix check for weight and priority of a scheduling node bnxt_en: Fix mqprio and XDP ring checking logic net: Fix unwanted sign extension in netdev_stats_to_stats64() net/usb: kalmia: Don't pass act_len in usb_bulk_msg error path net: openvswitch: fix possible memory leak in ovs_meter_cmd_set() af_key: Fix heap information leak ... |
||
Takashi Iwai
|
5661706efa |
Merge branch 'topic/apple-gmux' into for-next
Pull vga_switcheroo fix for Macs Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
Feng Tang
|
1470a108a6 |
perf c2c: Add report option to show false sharing in adjacent cachelines
Many platforms have feature of adjacent cachelines prefetch, when it is enabled, for data in RAM of 2 cachelines (2N and 2N+1) granularity, if one is fetched to cache, the other one could likely be fetched too, which sort of extends the cacheline size to double, thus the false sharing could happens in adjacent cachelines. 0Day has captured performance changed related with this [1], and some commercial software explicitly makes its hot global variables 128 bytes aligned (2 cache lines) to avoid this kind of extended false sharing. So add an option "--double-cl" for 'perf c2c report' to show false sharing in double cache line granularity, which acts just like the cacheline size is doubled. There is no change to c2c record. The hardware events of shared cacheline are still per cacheline, and this option just changes the granularity of how events are grouped and displayed. In the 'perf c2c report' output below (will-it-scale's 'pagefault2' case on old kernel): ---------------------------------------------------------------------- 26 31 2 0 0 0 0xffff888103ec6000 ---------------------------------------------------------------------- 35.48% 50.00% 0.00% 0.00% 0.00% 0x10 0 1 0xffffffff8133148b 1153 66 971 3748 74 [k] get_mem_cgroup_from_mm 6.45% 0.00% 0.00% 0.00% 0.00% 0x10 0 1 0xffffffff813396e4 570 0 1531 879 75 [k] mem_cgroup_charge 25.81% 50.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81331472 949 70 593 3359 74 [k] get_mem_cgroup_from_mm 19.35% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81339686 1352 0 1073 1022 74 [k] mem_cgroup_charge 9.68% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff813396d6 1401 0 863 768 74 [k] mem_cgroup_charge 3.23% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81333106 618 0 804 11 9 [k] uncharge_batch The offset 0x10 and 0x54 used to displayed in 2 groups, and now they are listed together to give users a hint of extended false sharing. [1]. https://lore.kernel.org/lkml/20201102091543.GM31092@shao2-debian/ Committer notes: Link: https://lore.kernel.org/r/Y+wvVNWqXb70l4uy@feng-clx Removed -a, leaving just as --double-cl, as this probably is not used so frequently and perhaps will be even auto-detected if we manage to record the MSR where this is configured. Reviewed-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Feng Tang <feng.tang@intel.com> Tested-by: Leo Yan <leo.yan@linaro.org> Acked-by: Joe Mario <jmario@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Link: https://lore.kernel.org/r/20230214075823.246414-1-feng.tang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Andrea Mayer
|
5198cb408f |
selftests: seg6: add selftest for PSP flavor in SRv6 End behavior
This selftest is designed for testing the PSP flavor in SRv6 End behavior. It instantiates a virtual network composed of several nodes: hosts and SRv6 routers. Each node is realized using a network namespace that is properly interconnected to others through veth pairs. The test makes use of the SRv6 End behavior and of the PSP flavor needed for removing the SRH from the IPv6 header at the penultimate node. The correct execution of the behavior is verified through reachability tests carried out between hosts. Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Paolo Lungaroni <paolo.lungaroni@uniroma2.it> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
Jamal Hadi Salim
|
265b4da82d |
net/sched: Retire rsvp classifier
The rsvp classifier has served us well for about a quarter of a century but has has not been getting much maintenance attention due to lack of known users. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
Jamal Hadi Salim
|
8c710f7525 |
net/sched: Retire tcindex classifier
The tcindex classifier has served us well for about a quarter of a century but has not been getting much TLC due to lack of known users. Most recently it has become easy prey to syzkaller. For this reason, we are retiring it. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
Jamal Hadi Salim
|
bbe77c14ee |
net/sched: Retire dsmark qdisc
The dsmark qdisc has served us well over the years for diffserv but has not been getting much attention due to other more popular approaches to do diffserv services. Most recently it has become a shooting target for syzkaller. For this reason, we are retiring it. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
Jamal Hadi Salim
|
fb38306ceb |
net/sched: Retire ATM qdisc
The ATM qdisc has served us well over the years but has not been getting much TLC due to lack of known users. Most recently it has become a shooting target for syzkaller. For this reason, we are retiring it. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
Jamal Hadi Salim
|
051d442098 |
net/sched: Retire CBQ qdisc
While this amazing qdisc has served us well over the years it has not been getting any tender love and care and has bitrotted over time. It has become mostly a shooting target for syzkaller lately. For this reason, we are retiring it. Goodbye CBQ - we loved you. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
Davide Caratti
|
f58531716c |
selftests: forwarding: tc_actions: cleanup temporary files when test is aborted
remove temporary files created by 'mirred_egress_to_ingress_tcp' test in the cleanup() handler. Also, change variable names to avoid clashing with globals from lib.sh. Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Link: https://lore.kernel.org/r/091649045a017fc00095ecbb75884e5681f7025f.1676368027.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |