Commit Graph

1555 Commits

Author SHA1 Message Date
Arnaldo Carvalho de Melo
3d3b5e9599 perf evlist: Split perf_evlist__id_hash
The previous situation was to receive an fd from where to read the event
ID.

Spin off a routine for when we have the ID handy, not having to read it
from some fd.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-06 13:10:45 -03:00
Arnaldo Carvalho de Melo
60098917c0 perf hists browser: Handle browsing empty hists tree
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-06 13:10:05 -03:00
Arnaldo Carvalho de Melo
d7603d5122 perf hists: Remove needless global col lenght calcs
To support multiple events we need to do these calcs per 'struct hists'
instance, and it turns out we already do that at:

	__hists__add_entry
		hists__inc_nr_entries
			hists__calc_col_len

for all the unfiltered hist_entry instances we stash in the rb tree, so
trow away the dead code.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-05 22:31:04 -03:00
Arnaldo Carvalho de Melo
a03f35ceeb perf report tui: Fix multi event switching
TAB/UNTAB were not hotkeys, so didn't exit hists__browse back to
hists__tui_browse_tree, allowing just the first event to be browsed.

Reported-by: William Cohen <wcohen@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: William Cohen <wcohen@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-05 22:31:04 -03:00
Ingo Molnar
888a8a3e9d Merge branch 'perf/urgent' into perf/core
Merge reason: Pick up updates before queueing up dependent patches.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-04 10:40:25 +01:00
Frederic Weisbecker
cfff2d909c perf: Fix undefined PyVarObject_HEAD_INIT in python 2.5
PyVarObject_HEAD_INIT is undefined in python 2.5, resulting
in a build crash:

	util/python.c:81: attention : déclaration implicite de la fonction « «PyVarObject_HEAD_INIT» »
	util/python.c:82: erreur: request for member «tp_name» in something not a structure or union
	util/python.c:117: erreur: request for member «tp_name» in something not a structure or union
	util/python.c:146: erreur: request for member «tp_name» in something not a structure or union
	util/python.c:177: erreur: request for member «tp_name» in something not a structure or union
	util/python.c:290: erreur: request for member «tp_name» in something not a structure or union
	util/python.c:359: erreur: request for member «tp_name» in something not a structure or union
	util/python.c:532: erreur: request for member «tp_name» in something not a structure or union
	util/python.c:761: erreur: request for member «tp_name» in something not a structure or union
	error: command 'gcc' failed with exit status 1
	make: *** [python/perf.so] Erreur 1

We can fix that by defining PyVarObject_HEAD_INIT as a wrapper on
PyObject_HEAD_INIT, thanks to a trick found on biopython:
d4eaf57946

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-04 01:17:27 +01:00
Frederic Weisbecker
ff9ae1babd perf: Fix missing strndup declaration
<ctype.h> is included first without _GNU_SOURCE, so it ends up
including <string.h> without declaring strndup(). And further
<string.h> declarations, even with _GNU_SOURCE defined, are
of course without effect.

Therefore:

	util/strfilter.c: Dans la fonction «strfilter_node__new» :
	util/strfilter.c:134: attention : déclaration implicite de la fonction « «strndup» »
	util/strfilter.c:134: attention : incompatible implicit declaration of built-in function «strndup»
	make: *** [util/strfilter.o] Erreur 1

Just don't include ctype.h as it doesn't appear to be necessary
anyway.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-04 01:17:18 +01:00
Frederic Weisbecker
0a10247914 perf: Set filters before mmaping events
We currently set the filters after we mmap the events, this is a
race that let undesired events record themselves in the buffer before
we had the time to set the filters.

So set the filters before they can be recorded. That also librarizes
the filters setting so that filtering can be done more easily
from other tools than perf record later.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
2011-03-02 16:05:51 +01:00
Arnaldo Carvalho de Melo
5807806a92 perf top tui: Wait till the first sample to refresh the screen.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-01 10:43:03 -03:00
Arnaldo Carvalho de Melo
374cfe5689 perf top: Fix reporting of invalid --vmlinux
Using ui__warning, that will, in --tui, show a window with the message,
waiting for the user to press Ok.

Also run exit_browser() to let newt do its final cleaning of the screen.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-01 10:27:27 -03:00
Arnaldo Carvalho de Melo
a1ceb741cf perf tui: Make ui__warning modal
By taking the ui__lock so that no other screen updates take place while
waiting for the user.

That was happening when handling an invalid --vmlinux parameter in 'perf
top --tui', with the screen refresh routine repainting the screen and
removing the warning window.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-01 10:24:43 -03:00
Arnaldo Carvalho de Melo
3166fc8fb6 perf top browser: Handle empty active symbols list
Fixing a SEGV. An empty list could happen when not being able to resolve
symbols, for instance when --vmlinux invalid-file is used.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-01 10:21:44 -03:00
Arnaldo Carvalho de Melo
a639dc64e5 perf symbols: Fix vmlinux path when not using --symfs
The ec5761e cset introduced the symfs feature with a bug for loading vmlinux
files that ended up causing this failure:

[root@emilia v2.6.38-rc5+]# strace -e trace=open perf top --vmlinux ./vmlinux 2>&1 | tail -3
open("/./vmlinux", O_RDONLY)            = -1 ENOENT (No such file or directory)
./vmlinux with build id b9266bf40e98dadb5d43a2f3e95d3c5d4aff46dc not found, continuing without symbols
The ./vmlinux file can't be used
[root@emilia v2.6.38-rc5+]#

Remove the extra slash, just like is done in the DSO__ORIG_DSO handling in
dso__load() and other parts of the ec5761e cset.

Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: David Ahern <daahern@cisco.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-28 13:54:38 -03:00
Thomas Renninger
54b08f5f90 perf timechart: Fix max number of cpus
Currently numcpus is determined in pid_put_sample which is only
called on sched_switch/sched_wakeup sample processing.

On a machine with a lot cpus I often saw the last cpu missing.

Check for (max) numcpus on every event happening and in the
beginning. -> fixes the issue for me.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: lenb@kernel.org
LKML-Reference: <1298842606-55712-6-git-send-email-trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-28 08:56:15 +01:00
Thomas Renninger
e853072055 perf timechart: Fix black idle boxes in the title
This fix is needed for eye of gnome and firefox svg viewers.
Only Inkscape can handle the broken case.

Compare with the other svg_legenda_box declarations, looks
like a typo slipped in at this place.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: lenb@kernel.org
LKML-Reference: <1298842606-55712-5-git-send-email-trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-28 08:56:14 +01:00
Arnaldo Carvalho de Melo
b210b3bb1b perf ui browser: Introduce ui_browser__show_title
Needed because we were only showing the title in ui_browser__show,
not in ui_browser__run, and in the run loop we may be calling other
browsers that would then change the title, when we go back to the
previous browser, we need to redraw the title.

We could have done this as the Newt help line, with pop, etc, but I
don't think its worth, doing it explicitely, when needed (some browsers
may not use the title area at all) seems enough/more flexible.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-25 11:33:31 -03:00
Arnaldo Carvalho de Melo
c16bfe9ac3 perf top browser: Fix up exit keys
The left key was exiting 'perf top --tui' when it really shouldn't, it
was too easy to leave the live annotation window and then press one too
many <- and get out of the tool altogether.

Do just like the report TUI does, ignore the left key for exit and also
ask the user when pressing ESC if that is really what is wanted.

Reported-by: Mike Galbraith <efault@gmx.de>
Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-25 09:30:29 -03:00
Arnaldo Carvalho de Melo
69cf0218d1 perf hists: Print number of samples, not the period sum
So that we match the header where we state the number of events with the
"Samples" column when using 'perf report -n/--show-nr-samples':

 [root@emilia ~]# perf record -a sleep 1
 [ perf record: Woken up 1 times to write data ]
 [ perf record: Captured and wrote 0.111 MB perf.data (~4860 samples) ]
 [root@emilia ~]# perf report --stdio --show-nr-samples
 # Events: 11  cycles
 #
 # Overhead  Samples        Command       Shared Object                        Symbol
 # ........ ..........  ...........  ..................  ............................
 #
     16.65%          1        sleep  [kernel.kallsyms]   [k] unmap_vmas
     16.10%          1         perf  libpthread-2.12.so  [.] __pthread_cleanup_push_defer
     15.79%          2         perf  [kernel.kallsyms]   [k] format_decode
     12.88%          1  kworker/1:2  [kernel.kallsyms]   [k] cache_reap
     10.69%          1      swapper  [kernel.kallsyms]   [k] _raw_spin_lock
      7.55%          1        sleep  [kernel.kallsyms]   [k] prepare_exec_creds
      6.00%          1         perf  [jbd2]              [k] start_this_handle
      5.29%          1         perf  [kernel.kallsyms]   [k] seq_read
      4.75%          1         perf  [kernel.kallsyms]   [k] get_pid_task
      4.30%          1         perf  [kernel.kallsyms]   [k] _raw_spin_unlock_irqrestore

 #
 # (For a higher level overview, try: perf report --sort comm,dso)
 #
 [root@emilia ~]#

Reported-by: Stephane Eranian <eranian@google.com>
Reported-by: Cliff Wickman <cpw@sgi.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: <stable@kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[ cherry-picked it from perf/core, as it has been reported by others as well. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-25 10:55:03 +01:00
Arnaldo Carvalho de Melo
170ae6bc24 perf annotate: Show better message when no vmlinux is found
In both --tui and --stdio, in 'annotate', 'top', 'report' when trying to
annotate a kernel symbol having just access to a kallsyms file, that
doesn't have the DWARF info needed for annotation.

Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-23 12:13:39 -03:00
Marcin Slusarz
9826e8329b perf lock: Document valid sort keys
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110222205312.GA18474@joi.lan>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-23 07:29:33 -03:00
Arnaldo Carvalho de Melo
6435a5e39d perf top browser: Adjust the browser indexes when refreshing
This is not a problem when we're not at the bottom of the active symbols
list, so was not noticed, but at the end of the screen it falls apart.

Fix it by adjusting the ui_browser indexes according to the new number
of entries in the rb_tree and by seeking from the start of the rb_tree
to find the new symbol at the top of the screen.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-23 07:25:02 -03:00
Arnaldo Carvalho de Melo
c97cf42219 perf top: Live TUI Annotation
Now one has just to press the right key, 'a' or Enter on the main 'perf
top --tui' screen to live annotate the symbol under the cursor.

The annotate window starts centered on the hottest line (the one with
most samples so far) then TAB and shift+TAB can be used to go to the
prev/next hot line.

Pressing 'H' at any point will center again the screen on the hottest
line.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-22 12:02:07 -03:00
Arnaldo Carvalho de Melo
8635bf6ea3 perf probe: Remove redundant checks
While fixing an error propagating problem in f809b25 I added two
redundant checks.

I did that because I didn't expect the checks to be on the while and for
loop condition expression, where they are tested before we run the loop,
where the 'ret' variable is set.

So remove it from there and leave it just after it is actually set,
eliminating unneded tests.

Reported-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-22 07:02:07 -03:00
Arnaldo Carvalho de Melo
e603dc1507 perf evsel: Fix inverted test for fixing up attr.inherit flag
The kernel refuses mmapping an event with the inherit flag set for
something that is systemwide (cpu == -1), and the evsel layer got this
reversed at some point, fix it.

The symtom was that the --pid and --tid parameters for 'perf record' and
'perf top' returned with -EINVAL, like:

 # /tmp/build-perf/perf record -v -fo/tmp/perf.data -p 1042
   Warning:  ... trying to fall back to cpu-clock-ticks

   Fatal: failed to mmap with 22 (Invalid argument)

Reported-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-21 22:27:59 -03:00
Arnaldo Carvalho de Melo
fbee632d0c perf probe: Fix error propagation leading to segfault
There are two hunks in this patch that stops probe processing as soon as one
error is found, breaking out of loops, the other fix an error propagation that
should return a negative error number but instead was returning the result of
"ret < 0", which is 1 and thus made several error checks fail because they test
agains < 0.

The problem could be triggered by asking for a variable that was optimized out,
fact that should stop the whole probe processing but instead was segfaulting
while installing broken probes:

[root@emilia ~]# probe perf_mmap:55 user_lock_limit
Failed to find the location of user_lock_limit at this address.
 Perhaps, it has been optimized out.
Failed to find 'user_lock_limit' in this function.
Add new events:
  probe:perf_mmap      (on perf_mmap:55 with user_lock_limit)
  probe:perf_mmap_1    (on perf_mmap:55 with user_lock_limit)
Segmentation fault (core dumped)
[root@emilia ~]# perf probe -l
  probe:perf_mmap      (on perf_mmap:55@git/linux/kernel/perf_event.c with user_lock_limit)
  probe:perf_mmap_1    (on perf_mmap:55@git/linux/kernel/perf_event.c with user_lock_limit)
[root@emilia ~]#

After the fix:

[root@emilia ~]# probe perf_mmap:55 user_lock_limit
Failed to find the location of user_lock_limit at this address.
 Perhaps, it has been optimized out.
Failed to find 'user_lock_limit' in this function.
  Error: Failed to add events. (-2)
[root@emilia ~]#

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-21 22:21:27 -03:00
Michael Witten
a3d1ee10d1 perf tools: Makefile: Remove various and sundry cruft
This commit squashes several commits that remove:

 unnecessary uname calls
 `sh -c'
 BUILT_INS and QUIET_BUILT_IN

    They have no effect, and the `fixup-builtins' and `check-builtins.sh'
    scripts don't even exist.

 RUNTIME_PREFIX

    It's currently never anything but unset, and it's apparently
    only meaningful when Microsoft Windows is the operating system
    (according to the source for git).

 TEST_PROGRAMS
 EXTRA_PROGRAMS
 unused SHELL_PATH_SQ portions
 unused test for V=2
 useless exports

    Only when `V' is undefined (that is, only when the value of `V'
    is empty) is `export V' performed, which just has the effect of
    placing the empty-valued variable `V' in the environment.

    The only other script to make use of `V' is `Documentation/Makefile',
    which only checks whether `V' is undefined (that is, whether the value
    of `V' is empty); hence, the `export V' has no effect whatsoever.

    Similarly, `export QUIET_GEN' is useless because it will only have
    a non-empty value when `V' has an empty-value, and when `V' has
    an empty-value, `QUIET_GEN' is always explicitly set in every
    script in which it is used.

    `DESTDIR' is only ever defined by the user via the environment
    or the command line, both of which are automatically exported
    to sub-make processes. Furthermore, no non-make sub-scripts
    make use of `DESTDIR' as an environment variable.

    No other scripts use `perfexec_instdir'.

 unused QUIET_SUBDIR{0,1}
 TAR and RPMBUILD
 PTHREAD_LIBS
 Maintainer's dist rules and commands
 distclean target
 Test suite coverage testing
 PRINT_DIR and NO_SUBDIR
 `configure' target
 NO_CURL
 @@PERF_VERSION@@ substitution

    Without the sed command, all of the rule's commands can be reduced
    to a single line that copies a file and sets the permissions properly
    in the process.

 `make test' echo line
 template_instdir
 PERF-BUILD-OPTIONS
 double-colon rules

    The use of double-colon rules seems misguided or vestigial git.

 Essentially hard-coded $(SCRIPTS) expansion

Signed-off-by: Michael Witten <mfwitten@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-18 07:43:06 -02:00
Michael Witten
0a54fb6360 perf tools: Makefile: Remove tool-specific cruft
This commit squashes several commits that remove:

 NO_C99_FORMAT
 CURLDIR and EXPATDIR
 NO_DEFLATE_BOUND
 CC_LD_DYNPATH and NO_R_TO_GCC_LINKER
 NO_PERL_MAKEMAKER
 INTERNAL_QSORT
 NO_EXTERNAL_GREP
 NO_PERL
 SCRIPT_PERL
 PERL_PATH_SQ

Signed-off-by: Michael Witten <mfwitten@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-18 07:42:36 -02:00
Michael Witten
8796cb9d7d perf tools: Makefile: Remove platform-specific cruft
While it makes sense that this tool could be used on
other platforms at least to parse data, there doesn't
appear to be any real support for such usage.

This commit squashes several commits that remove:

 SNPRINTF_RETURNS_BOGUS
 FREAD_READS_DIRECTORIES
 NO_D_{INO,TYPE}_IN_DIRENT
 NO_STRCASESTR
 NO_MEMMEM
 NO_STRTOUMAX and NO_STRTOULL
 NO_SETENV
 NO_UNSETENV
 NO_MKDTEMP
 NEEDS_LIBICONV
 NEEDS_SOCKET
 NO_MMAP
 NO_PTHREADS
 NO_PREAD
 NO_TRUSTABLE_FILEMODE
 NO_IPV6 and NO_SOCKADDR_STORAGE
 NO_ICONV and OLD_ICONV
 NO_NSEC, USE_NSEC, and USE_ST_TIMESPEC
 NO_ST_BLOCKS_IN_STRUCT_STAT
 NO_FINK and NO_DARWIN_PORTS
 NO_SYS_SELECT_H
 NO_HSTRERROR
 DIR_HAS_BSD_GROUP_SEMANTICS and FORCE_DIR_SET_GID
 NEEDS_NSL, NO_UINTMAX_T, NO_INET_{N,P}TON
 COMPAT_{CFLAGS,OBJS}
 Executable extension `X'

Signed-off-by: Michael Witten <mfwitten@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-18 07:42:07 -02:00
Michael Witten
006cdc3261 perf tools: Makefile: Remove vestigial git-specific cruft
This commit squashes several commits that remove:

 NO_SYMLINK_HEAD
 NO_SVN_TESTS
 NO_FAST_WORKING_DIRECTORY
 USE_STDEV
 SHA1/SSL cruft
 makefile rules

Signed-off-by: Michael Witten <mfwitten@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-18 07:40:54 -02:00
Arnaldo Carvalho de Melo
668b8788f4 perf list: Allow filtering list of events
The man page has the details, here are some examples:

[root@emilia ~]# perf list *fault*  *:*wait*

List of pre-defined events (to be used in -e):
  page-faults OR faults                      [Software event]
  minor-faults                               [Software event]
  major-faults                               [Software event]
  alignment-faults                           [Software event]
  emulation-faults                           [Software event]

  radeon:radeon_fence_wait_begin             [Tracepoint event]
  radeon:radeon_fence_wait_end               [Tracepoint event]
  writeback:wbc_writeback_wait               [Tracepoint event]
  writeback:wbc_balance_dirty_wait           [Tracepoint event]
  writeback:writeback_congestion_wait        [Tracepoint event]
  writeback:writeback_wait_iff_congested     [Tracepoint event]
  sched:sched_wait_task                      [Tracepoint event]
  sched:sched_process_wait                   [Tracepoint event]
  sched:sched_stat_wait                      [Tracepoint event]
  sched:sched_stat_iowait                    [Tracepoint event]
  syscalls:sys_enter_epoll_wait              [Tracepoint event]
  syscalls:sys_exit_epoll_wait               [Tracepoint event]
  syscalls:sys_enter_epoll_pwait             [Tracepoint event]
  syscalls:sys_exit_epoll_pwait              [Tracepoint event]
  syscalls:sys_enter_rt_sigtimedwait         [Tracepoint event]
  syscalls:sys_exit_rt_sigtimedwait          [Tracepoint event]
  syscalls:sys_enter_waitid                  [Tracepoint event]
  syscalls:sys_exit_waitid                   [Tracepoint event]
  syscalls:sys_enter_wait4                   [Tracepoint event]
  syscalls:sys_exit_wait4                    [Tracepoint event]
  syscalls:sys_enter_waitpid                 [Tracepoint event]
  syscalls:sys_exit_waitpid                  [Tracepoint event]
[root@emilia ~]#

Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-17 15:38:58 -02:00
Arnaldo Carvalho de Melo
74cfc17dc1 perf report: Tell the user when a perf.data file has no samples
[root@emilia ~]# perf report --stdio
The perf.data file has no samples!
[root@emilia ~]#

The TUI shows a popup warning message with the same message.

Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-17 14:40:46 -02:00
Arnaldo Carvalho de Melo
712a4b6049 perf record: Delay setting the header writing atexit call
While testing the --filter option I noticed that we were writing lots of
unneeded stuff to the perf.data header when the filter ioctl fails, so
move the atexit(atexit_header) call to after we create the counters
successfully.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-17 13:58:32 -02:00
Arnaldo Carvalho de Melo
fec9cbd15b perf hists: Print number of samples, not the period sum
So that we match the header where we state the number of events with the
"Samples" column when using 'perf report -n/--show-nr-samples':

 [root@emilia ~]# perf record -a sleep 1
 [ perf record: Woken up 1 times to write data ]
 [ perf record: Captured and wrote 0.111 MB perf.data (~4860 samples) ]
 [root@emilia ~]# perf report --stdio --show-nr-samples
 # Events: 11  cycles
 #
 # Overhead  Samples        Command       Shared Object                        Symbol
 # ........ ..........  ...........  ..................  ............................
 #
     16.65%          1        sleep  [kernel.kallsyms]   [k] unmap_vmas
     16.10%          1         perf  libpthread-2.12.so  [.] __pthread_cleanup_push_defer
     15.79%          2         perf  [kernel.kallsyms]   [k] format_decode
     12.88%          1  kworker/1:2  [kernel.kallsyms]   [k] cache_reap
     10.69%          1      swapper  [kernel.kallsyms]   [k] _raw_spin_lock
      7.55%          1        sleep  [kernel.kallsyms]   [k] prepare_exec_creds
      6.00%          1         perf  [jbd2]              [k] start_this_handle
      5.29%          1         perf  [kernel.kallsyms]   [k] seq_read
      4.75%          1         perf  [kernel.kallsyms]   [k] get_pid_task
      4.30%          1         perf  [kernel.kallsyms]   [k] _raw_spin_unlock_irqrestore

 #
 # (For a higher level overview, try: perf report --sort comm,dso)
 #
 [root@emilia ~]#

Reported-by: Stephane Eranian <eranian@google.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-17 13:56:20 -02:00
Stephane Eranian
f0c55bcf4a perf: make perf stat print user provided full event names
This patch changes the way perf stat prints event names at the end of a
run. Until now, it was trying to reconstruct the event name from its
encoding. The problem is that it would only print generic events without
their modifiers (u, k, pp).

This patch saves the event name as passed by the user in the evsel
struct and uses it to print the final event name.

This would also work in case perf is linked with a library (such as
libpfm4) which provides full PMU event tables.

$ perf stat -e cycles:u,cycles:k date
Wed Feb 16 14:58:52 CET 2011

 Performance counter stats for 'date':

            568600 cycles:u
           2779715 cycles:k

        0.001908182  seconds time elapsed

Cc: Arun Sharma <arun@sharma-home.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@gmail.com>
LPU-Reference: <4d5bdc64.98a1df0a.7aa3.06c2@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
[ committer note: Fixed a merge problem with 023695d "Add cgroup support" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-17 10:29:19 -02:00
Arnaldo Carvalho de Melo
4498062e72 perf python: Add cgroup.c to setup.py to get it building again
The 023695d cset added a new file, util/cgroup.c, that is referenced from
util/evsel.c, so it needs to be present in util/setup.py so that the python
shared object binding works, fixing this:

[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/python/
[root@emilia linux]# ./tools/perf/python/twatch.py
Traceback (most recent call last):
  File "./tools/perf/python/twatch.py", line 16, in <module>
    import perf
ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: close_cgroup

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-17 10:07:42 -02:00
Masami Hiramatsu
8737ebdea0 perf probe: Show filename which contains target function
Show filename which contains a target function with the function name on
"--lines" mode, because perf-probe just shows the first function even if
there are many same-name functions.

Originally adopted by Franck Bui-Huu's patch which shows file name
instead of function name. I've just modified it to show both of function
name and file name, because of completeness of output.

 E.g.)
 $ perf probe -L t_show
 <t_show@/home/mhiramat/ksrc/linux-2.6-tip/kernel/trace/ftrace.c:0>
      0  static int t_show(struct seq_file *m, void *v)
      1  {
      2         struct ftrace_iterator *iter = m->private;
 ...

 $ perf probe -L t_show@trace/trace.c
 <t_show@/home/mhiramat/ksrc/linux-2.6-tip/kernel/trace/trace.c:0>
      0  static int t_show(struct seq_file *m, void *v)
      1  {
                struct tracer *t = v;
 ...

Original-patch-by: Franck Bui-Huu <fbuihuu@gmail.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Franck Bui-Huu <fbuihuu@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110210090816.1809.43426.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-16 17:04:09 -02:00
Masami Hiramatsu
e116dfa1c3 perf probe: Support function@filename syntax for --line
Since "perf probe --add" supports function@filename syntax, --line
option should also support it.

Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Franck Bui-Huu <fbuihuu@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-kernel@vger.kernel.org
LKML-Reference: <20110210090810.1809.26913.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-16 17:03:23 -02:00
Jesse Brandeburg
4187e262bc perf tools: Update Makefile with some help
The perf makefile is nicely complete except for

a) an uninstall option
b) a 'make help' description

This patch implements b)
it also comments out other non-working makefile targets

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-16 14:47:56 -02:00
Arnaldo Carvalho de Melo
b99976e2d2 perf annotate browser: Use the percent color for the whole line
Not just for the percentage number, to see the hot lines more easily.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-16 14:47:55 -02:00
Arnaldo Carvalho de Melo
289c082044 perf annotate: Check if offset is less than symbol size
Just like done on symbol__inc_addr_samples to catch misparsed offsets
from objdump.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-16 14:47:55 -02:00
Arnaldo Carvalho de Melo
5c35d69fb6 perf ui: Serialize screen updates
The ui operations so far were used by just one thread, but 'perf top
--tui' now has two threads updating the screen, so we need to use a
mutex to avoid garbling the screen.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-16 14:47:55 -02:00
Stephane Eranian
023695d96e perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.

The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.

Example:

$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
 Performance counter stats for 'sleep 1':

      2,368,667,414  cycles                   test1
      2,369,661,459  cycles
      <not counted>  cycles                   test2

        1.001856890  seconds time elapsed

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-16 13:30:48 +01:00
Arnaldo Carvalho de Melo
0849327d13 perf report: Fix initializion of annotate symbol priv area
We only allocate it when in TUI mode. In --stdio mode unconditionally
initializing this area leads to memory corruption.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-11 12:09:54 -02:00
Arnaldo Carvalho de Melo
7c940c18c5 Merge remote branch 'acme/perf/urgent' into perf/core
Fixups due to rename of event_t routines from event__ to perf_event__
done in perf/core.

Conflicts:
	tools/perf/builtin-record.c
	tools/perf/builtin-top.c
	tools/perf/util/event.c
	tools/perf/util/event.h

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-11 11:45:54 -02:00
Arnaldo Carvalho de Melo
401b8e1317 perf tools: Fix thread_map event synthesizing in top and record
Jeff Moyer reported these messages:

  Warning:  ... trying to fall back to cpu-clock-ticks

couldn't open /proc/-1/status
couldn't open /proc/-1/maps
[ls output]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.008 MB perf.data (~363 samples) ]

That lead me and David Ahern to see that something was fishy on the thread
synthesizing routines, at least for the case where the workload is started
from 'perf record', as -1 is the default for target_tid in 'perf record --tid'
parameter, so somehow we were trying to synthesize the PERF_RECORD_MMAP and
PERF_RECORD_COMM events for the thread -1, a bug.

So I investigated this and noticed that when we introduced support for
recording a process and its threads using --pid some bugs were introduced and
that the way to fix it was to instead of passing the target_tid to the event
synthesizing routines we should better pass the thread_map that has the list of
threads for a --pid or just the single thread for a --tid.

Checked in the following ways:

On a 8-way machine run cyclictest:

[root@emilia ~]# perf record cyclictest -a -t -n -p99 -i100 -d50
policy: fifo: loadavg: 0.00 0.13 0.31 2/139 28798

T: 0 (28791) P:99 I:100 C:  25072 Min:      4 Act:    5 Avg:    6 Max:     122
T: 1 (28792) P:98 I:150 C:  16715 Min:      4 Act:    6 Avg:    5 Max:      27
T: 2 (28793) P:97 I:200 C:  12534 Min:      4 Act:    5 Avg:    4 Max:       8
T: 3 (28794) P:96 I:250 C:  10028 Min:      4 Act:    5 Avg:    5 Max:      96
T: 4 (28795) P:95 I:300 C:   8357 Min:      5 Act:    6 Avg:    5 Max:      12
T: 5 (28796) P:94 I:350 C:   7163 Min:      5 Act:    6 Avg:    5 Max:      12
T: 6 (28797) P:93 I:400 C:   6267 Min:      4 Act:    5 Avg:    5 Max:       9
T: 7 (28798) P:92 I:450 C:   5571 Min:      4 Act:    5 Avg:    5 Max:       9
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.108 MB perf.data (~4719 samples) ]

[root@emilia ~]#

This will create one extra thread per CPU:

[root@emilia ~]# tuna -t cyclictest -CP
                      thread       ctxt_switches
    pid SCHED_ rtpri affinity voluntary nonvoluntary             cmd
 28825   OTHER     0     0xff      2169          671      cyclictest
  28832   FIFO    93        6     52338            1      cyclictest
  28833   FIFO    92        7     46524            1      cyclictest
  28826   FIFO    99        0    209360            1      cyclictest
  28827   FIFO    98        1    139577            1      cyclictest
  28828   FIFO    97        2    104686            0      cyclictest
  28829   FIFO    96        3     83751            1      cyclictest
  28830   FIFO    95        4     69794            1      cyclictest
  28831   FIFO    94        5     59825            1      cyclictest
[root@emilia ~]#

So we should expect only samples for the above 9 threads when using the
--dump-raw-trace|-D perf report switch to look at the column with the tid:

[root@emilia ~]# perf report -D | grep RECORD_SAMPLE | cut -d/ -f2 | cut -d: -f1 | sort | uniq -c
    629 28825
    110 28826
    491 28827
    308 28828
    198 28829
    621 28830
    225 28831
    203 28832
     89 28833
[root@emilia ~]#

So for workloads started by 'perf record' seems to work, now for existing workloads,
just run cyclictest first, without 'perf record':

[root@emilia ~]# tuna -t cyclictest -CP
                      thread       ctxt_switches
    pid SCHED_ rtpri affinity voluntary nonvoluntary             cmd
 28859   OTHER     0     0xff       594          200      cyclictest
  28864   FIFO    95        4     16587            1      cyclictest
  28865   FIFO    94        5     14219            1      cyclictest
  28866   FIFO    93        6     12443            0      cyclictest
  28867   FIFO    92        7     11062            1      cyclictest
  28860   FIFO    99        0     49779            1      cyclictest
  28861   FIFO    98        1     33190            1      cyclictest
  28862   FIFO    97        2     24895            1      cyclictest
  28863   FIFO    96        3     19918            1      cyclictest
[root@emilia ~]#

and then later did:

[root@emilia ~]# perf record --pid 28859 sleep 3
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.027 MB perf.data (~1195 samples) ]
[root@emilia ~]#

To collect 3 seconds worth of samples for pid 28859 and its children:

[root@emilia ~]# perf report -D | grep RECORD_SAMPLE | cut -d/ -f2 | cut -d: -f1 | sort | uniq -c
     15 28859
     33 28860
     19 28861
     13 28862
     13 28863
     10 28864
     11 28865
      9 28866
    255 28867
[root@emilia ~]#

Works, last thing is to check if looking at just one of those threads also works:

[root@emilia ~]# perf record --tid 28866 sleep 3
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.006 MB perf.data (~242 samples) ]
[root@emilia ~]# perf report -D | grep RECORD_SAMPLE | cut -d/ -f2 | cut -d: -f1 | sort | uniq -c
      3 28866
[root@emilia ~]#

Works too.

Reported-by: Jeff Moyer <jmoyer@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-10 12:52:47 -02:00
Arnaldo Carvalho de Melo
d5e3d74700 perf annotate: Fix annotate context lines regression
The live annotation done in 'perf top' needs to limit the context before
lines that aren't filtered out by the min percent filter, if we don't do
that, the screen in a tty often is not enough for showing what is
interesting: lines with hits and a few source code lines before it.

Reported-by: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-08 15:29:25 -02:00
Arnaldo Carvalho de Melo
ce6f4fab40 perf annotate: Move locking to struct annotation
Since we'll need it when implementing the live annotate TUI browser.

This also simplifies things a bit by having the list head for the source
code to be in the dynamicly allocated part of struct annotation, that
way we don't have to pass it around, it can be found from the struct
symbol that is passed everywhere.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-08 15:03:36 -02:00
Arnaldo Carvalho de Melo
e3087b80aa perf annotate: Fix --stdio rendering
The checks for not using a max_lines parameter were b0rked, problem
introduced in 3653246.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-08 15:01:39 -02:00
Masami Hiramatsu
124bb83cd7 perf probe: Add bitfield member support
Add bitfield member accessing support to probe arguments.

Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20110204125211.9507.60265.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
[ committer note: Fixed up '%lu' use for return of BYTES_TO_BITS ('%zd') ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-07 12:48:48 -02:00
Borislav Petkov
a222179625 perf annotate: Fix build error
A small fix for when NO_NEWT_SUPPORT is defined.

Add a missing "struct" to the function prototype.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20110207143218.GA31197@kryptos.osrc.amd.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-07 12:41:55 -02:00