This timer HW supports 8, 16 and 32-bit timer widths. This
driver currently uses a u32 to store the max possible value
of the timer. However, statements perform addition of 2 in
xilinx_pwm_apply() when calculating the period_cycles and
duty_cycles values. Since priv->max is a u32, this will
result in an overflow to 1 which will not only be incorrect
but fail on range comparison. This results in making it
impossible to set the PWM in this timer mode.
There are two obvious solutions to the current problem:
1. Cast each instance where overflow occurs to u64.
2. Change priv->max from a u32 to a u64.
Solution #1 requires more code modifications, and leaves
opportunity to introduce similar overflows if other math
statements are added in the future. These may also go
undetected if running in non 32-bit timer modes.
Solution #2 is the much smaller and cleaner approach and
thus the chosen method in this patch.
This was tested on a Zynq UltraScale+ with multiple
instances of the PWM IP.
Signed-off-by: Ken Sloat <ksloat@designlinxhs.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/SJ0P222MB0107490C5371B848EF04351CA1E19@SJ0P222MB0107.NAMP222.PROD.OUTLOOK.COM
Signed-off-by: Michal Simek <michal.simek@amd.com>
Currently hv_read_tsc_page_tsc() (ab)uses the (valid) time value of
U64_MAX as an error return. This breaks the clean wrap-around of the
clock.
Modify the function signature to return a boolean state and provide
another u64 pointer to store the actual time on success. This obviates
the need to steal one time value and restores the full counter width.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V
Link: https://lore.kernel.org/r/20230519102715.775630881@infradead.org
With ECV and CNTPOFF_EL2, it is very easy to offer an offset for
the physical timer. So let's do just that.
Nothing can set the offset yet, so this should have no effect
whatsoever (famous last words...).
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-5-maz@kernel.org
- Core:
- The timer_shutdown[_sync]() infrastructure:
Tearing down timers can be tedious when there are circular
dependencies to other things which need to be torn down. A prime
example is timer and workqueue where the timer schedules work and the
work arms the timer.
What needs to prevented is that pending work which is drained via
destroy_workqueue() does not rearm the previously shutdown
timer. Nothing in that shutdown sequence relies on the timer being
functional.
The conclusion was that the semantics of timer_shutdown_sync() should
be:
- timer is not enqueued
- timer callback is not running
- timer cannot be rearmed
Preventing the rearming of shutdown timers is done by discarding rearm
attempts silently. A warning for the case that a rearm attempt of a
shutdown timer is detected would not be really helpful because it's
entirely unclear how it should be acted upon. The only way to address
such a case is to add 'if (in_shutdown)' conditionals all over the
place. This is error prone and in most cases of teardown not required
all.
- The real fix for the bluetooth HCI teardown based on
timer_shutdown_sync().
A larger scale conversion to timer_shutdown_sync() is work in
progress.
- Consolidation of VDSO time namespace helper functions
- Small fixes for timer and timerqueue
- Drivers:
- Prevent integer overflow on the XGene-1 TVAL register which causes
an never ending interrupt storm.
- The usual set of new device tree bindings
- Small fixes and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=JlDe
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timers, timekeeping and drivers:
Core:
- The timer_shutdown[_sync]() infrastructure:
Tearing down timers can be tedious when there are circular
dependencies to other things which need to be torn down. A prime
example is timer and workqueue where the timer schedules work and
the work arms the timer.
What needs to prevented is that pending work which is drained via
destroy_workqueue() does not rearm the previously shutdown timer.
Nothing in that shutdown sequence relies on the timer being
functional.
The conclusion was that the semantics of timer_shutdown_sync()
should be:
- timer is not enqueued
- timer callback is not running
- timer cannot be rearmed
Preventing the rearming of shutdown timers is done by discarding
rearm attempts silently.
A warning for the case that a rearm attempt of a shutdown timer is
detected would not be really helpful because it's entirely unclear
how it should be acted upon. The only way to address such a case is
to add 'if (in_shutdown)' conditionals all over the place. This is
error prone and in most cases of teardown not required all.
- The real fix for the bluetooth HCI teardown based on
timer_shutdown_sync().
A larger scale conversion to timer_shutdown_sync() is work in
progress.
- Consolidation of VDSO time namespace helper functions
- Small fixes for timer and timerqueue
Drivers:
- Prevent integer overflow on the XGene-1 TVAL register which causes
an never ending interrupt storm.
- The usual set of new device tree bindings
- Small fixes and improvements all over the place"
* tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
dt-bindings: timer: renesas,cmt: Add r8a779g0 CMT support
dt-bindings: timer: renesas,tmu: Add r8a779g0 support
clocksource/drivers/arm_arch_timer: Use kstrtobool() instead of strtobool()
clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock()
clocksource/drivers/timer-ti-dm: Clear settings on probe and free
clocksource/drivers/timer-ti-dm: Make timer_get_irq static
clocksource/drivers/timer-ti-dm: Fix warning for omap_timer_match
clocksource/drivers/arm_arch_timer: Fix XGene-1 TVAL register math error
clocksource/drivers/timer-npcm7xx: Enable timer 1 clock before use
dt-bindings: timer: nuvoton,npcm7xx-timer: Allow specifying all clocks
dt-bindings: timer: rockchip: Add rockchip,rk3128-timer
clockevents: Repair kernel-doc for clockevent_delta2ns()
clocksource/drivers/ingenic-ost: Define pm functions properly in platform_driver struct
clocksource/drivers/sh_cmt: Access registers according to spec
vdso/timens: Refactor copy-pasted find_timens_vvar_page() helper into one copy
Bluetooth: hci_qca: Fix the teardown problem for real
timers: Update the documentation to reflect on the new timer_shutdown() API
timers: Provide timer_shutdown[_sync]()
timers: Add shutdown mechanism to the internal functions
timers: Split [try_to_]del_timer[_sync]() to prepare for shutdown mode
...
- Core:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for PCI/MSI[-X]
and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows device
manufactures to provide implementation defined storage for MSI messages
contrary to the uniform and specification defined storage mechanisms for
PCI/MSI and PCI/MSI-X. IMS not only allows to overcome the size limitations
of the MSI-X table, but also gives the device manufacturer the freedom to
store the message in arbitrary places, even in host memory which is shared
with the device.
There have been several attempts to glue this into the current MSI code,
but after lengthy discussions it turned out that there is a fundamental
design problem in the current PCI/MSI-X implementation. This needs some
historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management was
completely different from what we have today in the actively developed
architectures. Interrupt management was completely architecture specific
and while there were attempts to create common infrastructure the
commonalities were rudimentary and just providing shared data structures and
interfaces so that drivers could be written in an architecture agnostic
way.
The initial PCI/MSI[-X] support obviously plugged into this model which
resulted in some basic shared infrastructure in the PCI core code for
setting up MSI descriptors, which are a pure software construct for holding
data relevant for a particular MSI interrupt, but the actual association to
Linux interrupts was completely architecture specific. This model is still
supported today to keep museum architectures and notorious stranglers
alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the kernel,
which was creating yet another architecture specific mechanism and resulted
in an unholy mess on top of the existing horrors of x86 interrupt handling.
The x86 interrupt management code was already an incomprehensible maze of
indirections between the CPU vector management, interrupt remapping and the
actual IO/APIC and PCI/MSI[-X] implementation.
At roughly the same time ARM struggled with the ever growing SoC specific
extensions which were glued on top of the architected GIC interrupt
controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86 vector
domain and interrupt remapping and also allowed ARM to handle the zoo of
SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that it is
not available the PCI/MSI[-X] domains have the vector domain as their
parent. This reduced the required interaction between the domains pretty
much to the initialization phase where it is obviously required to
establish the proper parent relation ship in the components of the
hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the hardware
it's clear that the actual PCI/MSI[-X] interrupt controller is not a global
entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the easy
solution of providing "global" PCI/MSI domains which was possible because
the PCI/MSI[-X] handling is uniform across the devices. This also allowed
to keep the existing PCI/MSI[-X] infrastructure mostly unchanged which in
turn made it simple to keep the existing architecture specific management
alive.
A similar problem was created in the ARM world with support for IP block
specific message storage. Instead of going all the way to stack a IP block
specific domain on top of the generic MSI domain this ended in a construct
which provides a "global" platform MSI domain which allows overriding the
irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the MSI
infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into the
existing infrastructure. Some of this just works by chance on particular
platforms but will fail in hard to diagnose ways when the driver is used
on platforms where the underlying MSI interrupt management code does not
expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront to
avoid resource exhaustion. They are expanded at run-time when the guest
actually tries to use them. The way how this is implemented is that the
host disables MSI-X and then re-enables it with a larger number of
vectors again. That works by chance because most device drivers set up
all interrupts before the device actually will utilize them. But that's
not universally true because some drivers allocate a large enough number
of vectors but do not utilize them until it's actually required,
e.g. for acceleration support. But at that point other interrupts of the
device might be in active use and the MSI-X disable/enable dance can
just result in losing interrupts and therefore hard to diagnose subtle
problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact that IMS
is not longer providing a uniform storage and configuration model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for PCI/IMS.
PCI/IMS has been verified with the work in progress IDXD driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
- Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place
-----BEGIN PGP SIGNATURE-----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=9erA
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt core and driver subsystem:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for
PCI/MSI[-X] and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows
device manufactures to provide implementation defined storage for MSI
messages (as opposed to PCI/MSI and PCI/MSI-X that has a specified
message store which is uniform accross all devices). The PCI/MSI[-X]
uniformity allowed us to get away with "global" PCI/MSI domains.
IMS not only allows to overcome the size limitations of the MSI-X
table, but also gives the device manufacturer the freedom to store the
message in arbitrary places, even in host memory which is shared with
the device.
There have been several attempts to glue this into the current MSI
code, but after lengthy discussions it turned out that there is a
fundamental design problem in the current PCI/MSI-X implementation.
This needs some historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management
was completely different from what we have today in the actively
developed architectures. Interrupt management was completely
architecture specific and while there were attempts to create common
infrastructure the commonalities were rudimentary and just providing
shared data structures and interfaces so that drivers could be written
in an architecture agnostic way.
The initial PCI/MSI[-X] support obviously plugged into this model
which resulted in some basic shared infrastructure in the PCI core
code for setting up MSI descriptors, which are a pure software
construct for holding data relevant for a particular MSI interrupt,
but the actual association to Linux interrupts was completely
architecture specific. This model is still supported today to keep
museum architectures and notorious stragglers alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the
kernel, which was creating yet another architecture specific mechanism
and resulted in an unholy mess on top of the existing horrors of x86
interrupt handling. The x86 interrupt management code was already an
incomprehensible maze of indirections between the CPU vector
management, interrupt remapping and the actual IO/APIC and PCI/MSI[-X]
implementation.
At roughly the same time ARM struggled with the ever growing SoC
specific extensions which were glued on top of the architected GIC
interrupt controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86
vector domain and interrupt remapping and also allowed ARM to handle
the zoo of SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that
it is not available the PCI/MSI[-X] domains have the vector domain as
their parent. This reduced the required interaction between the
domains pretty much to the initialization phase where it is obviously
required to establish the proper parent relation ship in the
components of the hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the
hardware it's clear that the actual PCI/MSI[-X] interrupt controller
is not a global entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the
easy solution of providing "global" PCI/MSI domains which was possible
because the PCI/MSI[-X] handling is uniform across the devices. This
also allowed to keep the existing PCI/MSI[-X] infrastructure mostly
unchanged which in turn made it simple to keep the existing
architecture specific management alive.
A similar problem was created in the ARM world with support for IP
block specific message storage. Instead of going all the way to stack
a IP block specific domain on top of the generic MSI domain this ended
in a construct which provides a "global" platform MSI domain which
allows overriding the irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the
MSI infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into
the existing infrastructure. Some of this just works by chance on
particular platforms but will fail in hard to diagnose ways when the
driver is used on platforms where the underlying MSI interrupt
management code does not expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront
to avoid resource exhaustion. They are expanded at run-time when the
guest actually tries to use them. The way how this is implemented is
that the host disables MSI-X and then re-enables it with a larger
number of vectors again. That works by chance because most device
drivers set up all interrupts before the device actually will utilize
them. But that's not universally true because some drivers allocate a
large enough number of vectors but do not utilize them until it's
actually required, e.g. for acceleration support. But at that point
other interrupts of the device might be in active use and the MSI-X
disable/enable dance can just result in losing interrupts and
therefore hard to diagnose subtle problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact
that IMS is not longer providing a uniform storage and configuration
model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per
device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for
PCI/IMS. PCI/IMS has been verified with the work in progress IDXD
driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place"
* tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (134 commits)
irqchip/ti-sci-inta: Fix kernel doc
irqchip/gic-v2m: Mark a few functions __init
irqchip/gic-v2m: Include arm-gic-common.h
irqchip/irq-mvebu-icu: Fix works by chance pointer assignment
iommu/amd: Enable PCI/IMS
iommu/vt-d: Enable PCI/IMS
x86/apic/msi: Enable PCI/IMS
PCI/MSI: Provide pci_ims_alloc/free_irq()
PCI/MSI: Provide IMS (Interrupt Message Store) support
genirq/msi: Provide constants for PCI/IMS support
x86/apic/msi: Enable MSI_FLAG_PCI_MSIX_ALLOC_DYN
PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X
PCI/MSI: Provide prepare_desc() MSI domain op
PCI/MSI: Split MSI-X descriptor setup
genirq/msi: Provide MSI_FLAG_MSIX_ALLOC_DYN
genirq/msi: Provide msi_domain_alloc_irq_at()
genirq/msi: Provide msi_domain_ops:: Prepare_desc()
genirq/msi: Provide msi_desc:: Msi_data
genirq/msi: Provide struct msi_map
x86/apic/msi: Remove arch_create_remap_msi_irq_domain()
...
We can make timer_get_irq() static as noted by Janusz. It is only used by
omap_rproc_get_timer_irq() via platform data.
Reported-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221028103604.40385-1-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Microsoft Hypervisor root partition has to map the TSC page specified
by the hypervisor, instead of providing the page to the hypervisor like
it's done in the guest partitions.
However, it's too early to map the page when the clock is initialized, so, the
actual mapping is happening later.
Signed-off-by: Stanislav Kinsburskiy <stanislav.kinsburskiy@gmail.com>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Wei Liu <wei.liu@kernel.org>
CC: Dexuan Cui <decui@microsoft.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Borislav Petkov <bp@alien8.de>
CC: Dave Hansen <dave.hansen@linux.intel.com>
CC: x86@kernel.org
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Daniel Lezcano <daniel.lezcano@linaro.org>
CC: linux-hyperv@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Link: https://lore.kernel.org/r/166759443644.385891.15921594265843430260.stgit@skinsburskii-cloud-desktop.internal.cloudapp.net
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Instead of converting the virtual address to physical directly.
This is a precursor patch for the upcoming support for TSC page mapping into
Microsoft Hypervisor root partition, where TSC PFN will be defined by the
hypervisor and thus can't be obtained by linear translation of the physical
address.
Signed-off-by: Stanislav Kinsburskiy <stanislav.kinsburskiy@gmail.com>
CC: Andy Lutomirski <luto@kernel.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Borislav Petkov <bp@alien8.de>
CC: Dave Hansen <dave.hansen@linux.intel.com>
CC: x86@kernel.org
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Wei Liu <wei.liu@kernel.org>
CC: Dexuan Cui <decui@microsoft.com>
CC: Daniel Lezcano <daniel.lezcano@linaro.org>
CC: linux-kernel@vger.kernel.org
CC: linux-hyperv@vger.kernel.org
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Link: https://lore.kernel.org/r/166749833939.218190.14095015146003109462.stgit@skinsburskii-cloud-desktop.internal.cloudapp.net
Signed-off-by: Wei Liu <wei.liu@kernel.org>
clocksource/hyperv_timer.h is included into the VDSO build. It includes
asm/mshyperv.h which in turn includes the world and some more. This worked
so far by chance, but any subtle change in the include chain results in a
build breakage because VDSO builds are building user space libraries.
Include asm/hyperv-tlfs.h instead which contains everything what the VDSO
build needs except the hv_get_raw_timer() define. Move this define into a
separate header file, which contains the prerequisites (msr.h) and is
included by clocksource/hyperv_timer.h.
Fixup drivers/hv/vmbus_drv.c which relies on the indirect include of
asm/mshyperv.h.
With that the VDSO build only pulls in the minimum requirements.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/87fsemtut0.ffs@tglx
There is no longer any need to expose the elements of struct omap_dm_timer
outside the driver. The pwm and remoteproc drivers just use struct
omap_dm_timer as a cookie.
Let's move the elements of struct omap_dm_timer into struct dmtimer that
is private to the driver. To do this, we mostly rename omap_dm_timer to
dmtimer in the driver. We keep omap_dm_timer only for the exposed
functions in the platform_data for the pwm and remoteproc drivers.
Let's also add a note about not using the exposed functions internally as
those will get deprecated eventually in favor of Linux generic frameworks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-8-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
These defines are only used by timer-ti-dm driver.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-6-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Let's unify register access and use dmtimer_read() and dmtimer_write()
also for the timer revision specific registers like we now do for the
shread registers.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-5-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
We still have some unused functions left, let's drop them.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-2-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Walleij)
- Fix grammar typo in the ARM global timer Kconfig option (Randy
Dunlap)
- Add the tegra186 timer and use it on the tegra234 board (Thierry
Reding)
- Add the 'CPUXGPT' CPU timer for Mediatek MT6795 and implement a
workaround to overcome an ATF bug where the timer is not correctly
initialized (AngeloGioacchino Del Regno)
- Rework the suspend/resume approach to enable the feature on the
timer even it is not an active clock and fix a compilation warning
(Claudiu Beznea)
- Add the Add R-Car Gen4 timer support along with the DT bindings
(Wolfram Sang)
- Add compatible for ti,am654-timer to support AM6 SoC (Tony Lindgren)
- Fix Kconfig option to put it back to 'bool' instead of 'tristate'
for the tegra186 (Daniel Lezcano)
- Sort 'family,type' DT bindings for the Renesas timers (Geert
Uytterhoeven)
- Add compatible 'allwinner,sun20i-d1-timer' for Allwinner D1 (Samuel
Holland)
- Remove unnecessary (void*) conversions for sun4i (XU pengfei)
- Remove unnecessary (void*) conversions for sun5i (Li zeming)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmLhWF0ACgkQqDIjiipP
6E+ziAgArY8BJ/09w4rt63LDO5nynorr0+Uuf0E9hCmc0KzRsSF3hO39EcuLj1zD
ubKKSXwaOucAcRYj7gCeqaSk/IOs9EmwESRVtLLIwEwYsg44iC1vmq4pJ8cX66qN
h5TqkOiq77fPIY3BR/nSFxddmlU2farO8oSUqdLNsVrqoIq2rttaQYADdYGa4LYn
dvQHEmh6jvJRoZM3aR6It0EWM7pyHKxAWFChWv+SbikheDCgIcugz+FUTy9lyhmf
39wLm2srmrCLbjaGdJnyc38/y/UPIJ0aqeSf7XSiHTWQ+dfNBfdbrmPTSJHiyIt+
iPrlx0ShvrMXeOxgbSxse53e+9Q88w==
=ApcN
-----END PGP SIGNATURE-----
Merge tag 'timers-v5.20-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clockevent/source updates from Daniel Lezcano:
- Add the missing DT bindings for the MTU nomadik timer (Linus
Walleij)
- Fix grammar typo in the ARM global timer Kconfig option (Randy
Dunlap)
- Add the tegra186 timer and use it on the tegra234 board (Thierry
Reding)
- Add the 'CPUXGPT' CPU timer for Mediatek MT6795 and implement a
workaround to overcome an ATF bug where the timer is not correctly
initialized (AngeloGioacchino Del Regno)
- Rework the suspend/resume approach to enable the feature on the
timer even it is not an active clock and fix a compilation warning
(Claudiu Beznea)
- Add the Add R-Car Gen4 timer support along with the DT bindings
(Wolfram Sang)
- Add compatible for ti,am654-timer to support AM6 SoC (Tony Lindgren)
- Fix Kconfig option to put it back to 'bool' instead of 'tristate'
for the tegra186 (Daniel Lezcano)
- Sort 'family,type' DT bindings for the Renesas timers (Geert
Uytterhoeven)
- Add compatible 'allwinner,sun20i-d1-timer' for Allwinner D1 (Samuel
Holland)
- Remove unnecessary (void*) conversions for sun4i (XU pengfei)
- Remove unnecessary (void*) conversions for sun5i (Li zeming)
Link: https://lore.kernel.org/all/7472984e-f502-5f27-82bf-070127dd85a5@linaro.org
The __omap_dm_timer_* inline functions in the header are no longer needed
outside the driver, and the header ifdefs prevent the driver working for
ARCH_K3.
Let's move the inline functions to the driver and drop the ifdefs and
drop the unused functions __omap_dm_timer_override_errata() and
__omap_dm_timer_load_start().
Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220408101715.43697-2-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Quite a large number of conversions this time around, courtesy of Uwe
who has been working tirelessly on these. No drivers of the legacy API
are left at this point, so as a next step the old API can be removed.
Support is added for a few new devices such as the Xilinx AXI timer-
based PWMs and the PWM IP found on Sunplus SoCs.
Other than that, there's a number of fixes, cleanups and optimizations.
-----BEGIN PGP SIGNATURE-----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=CwnJ
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Quite a large number of conversions this time around, courtesy of Uwe
who has been working tirelessly on these. No drivers of the legacy API
are left at this point, so as a next step the old API can be removed.
Support is added for a few new devices such as the Xilinx AXI timer-
based PWMs and the PWM IP found on Sunplus SoCs.
Other than that, there's a number of fixes, cleanups and optimizations"
* tag 'pwm/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (43 commits)
pwm: pwm-cros-ec: Add channel type support
dt-bindings: google,cros-ec-pwm: Add the new -type compatible
dt-bindings: Add mfd/cros_ec definitions
pwm: Document that the pinstate of a disabled PWM isn't reliable
pwm: twl-led: Implement .apply() callback
pwm: lpc18xx: Implement .apply() callback
pwm: mediatek: Implement .apply() callback
pwm: lpc32xx: Implement .apply() callback
pwm: tegra: Implement .apply() callback
pwm: stmpe: Implement .apply() callback
pwm: sti: Implement .apply() callback
pwm: pwm-mediatek: Add support for MediaTek Helio X10 MT6795
dt-bindings: pwm: pwm-mediatek: Add documentation for MT6795 SoC
pwm: tegra: Optimize period calculation
pwm: renesas-tpu: Improve precision of period and duty_cycle calculation
pwm: renesas-tpu: Improve maths to compute register settings
pwm: renesas-tpu: Rename variables to match the usual naming
pwm: renesas-tpu: Implement .apply() callback
pwm: renesas-tpu: Make use of devm functions
pwm: renesas-tpu: Make use of dev_err_probe()
...
This adds PWM support for Xilinx LogiCORE IP AXI soft timers commonly
found on Xilinx FPGAs. At the moment clock control is very basic: we
just enable the clock during probe and pin the frequency. In the future,
someone could add support for disabling the clock when not in use.
Some common code has been specially demarcated. While currently only
used by the PWM driver, it is anticipated that it may be split off in
the future to be used by the timer driver as well.
This driver was written with reference to Xilinx DS764 for v1.03.a [1].
[1] https://www.xilinx.com/support/documentation/ip_documentation/axi_timer/v1_03_a/axi_timer_ds764.pdf
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Add a clocksource based on the goldfish-rtc device.
Move the timer register definition to <clocksource/timer-goldfish.h>
This kernel implementation is based on the QEMU upstream implementation:
https://git.qemu.org/?p=qemu.git;a=blob_plain;f=hw/rtc/goldfish_rtc.c
goldfish-timer is a high-precision signed 64-bit nanosecond timer.
It is part of the 'goldfish' virtual hardware platform used to run
some emulated Android systems under QEMU.
This timer only supports oneshot event.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20220406201523.243733-4-laurent@vivier.eu
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
With FEAT_ECV and the 1GHz counter, it is pretty likely that the
event stream divider doesn't fit in the field that holds the
divider value (we only have 4 bits to describe counter bits [15:0]
Thankfully, FEAT_ECV also provides a scaling mechanism to switch
the field to cover counter bits [23:8] instead.
Enable this on arm64 when ECV is available (32bit doesn't have
any detection infrastructure and is unlikely to be run on an
ARMv8.6 system anyway).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220203170502.2694422-1-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
* More progress on the protected VM front, now with the full
fixed feature set as well as the limitation of some hypercalls
after initialisation.
* Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
* Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
* More memcg accounting of the memory allocated on behalf of a guest
* Timer and vgic selftests
* Workarounds for the Apple M1 broken vgic implementation
* KConfig cleanups
* New kvmarm.mode=none option, for those who really dislike us
RISC-V:
* New KVM port.
x86:
* New API to control TSC offset from userspace
* TSC scaling for nested hypervisors on SVM
* Switch masterclock protection from raw_spin_lock to seqcount
* Clean up function prototypes in the page fault code and avoid
repeated memslot lookups
* Convey the exit reason to userspace on emulation failure
* Configure time between NX page recovery iterations
* Expose Predictive Store Forwarding Disable CPUID leaf
* Allocate page tracking data structures lazily (if the i915
KVM-GT functionality is not compiled in)
* Cleanups, fixes and optimizations for the shadow MMU code
s390:
* SIGP Fixes
* initial preparations for lazy destroy of secure VMs
* storage key improvements/fixes
* Log the guest CPNC
Starting from this release, KVM-PPC patches will come from
Michael Ellerman's PPC tree.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGBOiEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNowwf/axlx3g9sgCwQHr12/6UF/7hL/RwP
9z+pGiUzjl2YQE+RjSvLqyd6zXh+h4dOdOKbZDLSkSTbcral/8U70ojKnQsXM0XM
1LoymxBTJqkgQBLm9LjYreEbzrPV4irk4ygEmuk3CPOHZu8xX1ei6c5LdandtM/n
XVUkXsQY+STkmnGv4P3GcPoDththCr0tBTWrFWtxa0w9hYOxx0ay1AZFlgM4FFX0
QFuRc8VBLoDJpIUjbkhsIRIbrlHc/YDGjuYnAU7lV/CIME8vf2BW6uBwIZJdYcDj
0ejozLjodEnuKXQGnc8sXFioLX2gbMyQJEvwCgRvUu/EU7ncFm1lfs7THQ==
=UxKM
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- More progress on the protected VM front, now with the full fixed
feature set as well as the limitation of some hypercalls after
initialisation.
- Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
- Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
- More memcg accounting of the memory allocated on behalf of a guest
- Timer and vgic selftests
- Workarounds for the Apple M1 broken vgic implementation
- KConfig cleanups
- New kvmarm.mode=none option, for those who really dislike us
RISC-V:
- New KVM port.
x86:
- New API to control TSC offset from userspace
- TSC scaling for nested hypervisors on SVM
- Switch masterclock protection from raw_spin_lock to seqcount
- Clean up function prototypes in the page fault code and avoid
repeated memslot lookups
- Convey the exit reason to userspace on emulation failure
- Configure time between NX page recovery iterations
- Expose Predictive Store Forwarding Disable CPUID leaf
- Allocate page tracking data structures lazily (if the i915 KVM-GT
functionality is not compiled in)
- Cleanups, fixes and optimizations for the shadow MMU code
s390:
- SIGP Fixes
- initial preparations for lazy destroy of secure VMs
- storage key improvements/fixes
- Log the guest CPNC
Starting from this release, KVM-PPC patches will come from Michael
Ellerman's PPC tree"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
RISC-V: KVM: fix boolreturn.cocci warnings
RISC-V: KVM: remove unneeded semicolon
RISC-V: KVM: Fix GPA passed to __kvm_riscv_hfence_gvma_xyz() functions
RISC-V: KVM: Factor-out FP virtualization into separate sources
KVM: s390: add debug statement for diag 318 CPNC data
KVM: s390: pv: properly handle page flags for protected guests
KVM: s390: Fix handle_sske page fault handling
KVM: x86: SGX must obey the KVM_INTERNAL_ERROR_EMULATION protocol
KVM: x86: On emulation failure, convey the exit reason, etc. to userspace
KVM: x86: Get exit_reason as part of kvm_x86_ops.get_exit_info
KVM: x86: Clarify the kvm_run.emulation_failure structure layout
KVM: s390: Add a routine for setting userspace CPU state
KVM: s390: Simplify SIGP Set Arch handling
KVM: s390: pv: avoid stalls when making pages secure
KVM: s390: pv: avoid stalls for kvm_s390_pv_init_vm
KVM: s390: pv: avoid double free of sida page
KVM: s390: pv: add macros for UVC CC values
s390/mm: optimize reset_guest_reference_bit()
s390/mm: optimize set_guest_storage_key()
s390/mm: no need for pte_alloc_map_lock() if we know the pmd is present
...
- No core updates
- No new clocksource/event driver
- A large rework of the ARM architected timer driver to prepare for the
support of the upcoming ARMv8.6 support
- Fix Kconfig options for Exynos MCT, Samsung PWM and TI DM timers
- Address a namespace collison in the ARC sp804 timer driver
-----BEGIN PGP SIGNATURE-----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=SVx3
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Time, timers and timekeeping updates:
- No core updates
- No new clocksource/event driver
- A large rework of the ARM architected timer driver to prepare for
the support of the upcoming ARMv8.6 support
- Fix Kconfig options for Exynos MCT, Samsung PWM and TI DM timers
- Address a namespace collison in the ARC sp804 timer driver"
* tag 'timers-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/timer-ti-dm: Select TIMER_OF
clocksource/drivers/exynosy: Depend on sub-architecture for Exynos MCT and Samsung PWM
clocksource/drivers/arch_arm_timer: Move workaround synchronisation around
clocksource/drivers/arm_arch_timer: Fix masking for high freq counters
clocksource/drivers/arm_arch_timer: Drop unnecessary ISB on CVAL programming
clocksource/drivers/arm_arch_timer: Remove any trace of the TVAL programming interface
clocksource/drivers/arm_arch_timer: Work around broken CVAL implementations
clocksource/drivers/arm_arch_timer: Advertise 56bit timer to the core code
clocksource/drivers/arm_arch_timer: Move MMIO timer programming over to CVAL
clocksource/drivers/arm_arch_timer: Fix MMIO base address vs callback ordering issue
clocksource/drivers/arm_arch_timer: Move drop _tval from erratum function names
clocksource/drivers/arm_arch_timer: Move system register timer programming over to CVAL
clocksource/drivers/arm_arch_timer: Extend write side of timer register accessors to u64
clocksource/drivers/arm_arch_timer: Drop CNT*_TVAL read accessors
clocksource/arm_arch_timer: Add build-time guards for unhandled register accesses
clocksource/drivers/arc_timer: Eliminate redefined macro error
In order to cope better with high frequency counters, move the
programming of the timers from the countdown timer (TVAL) over
to the comparator (CVAL).
The programming model is slightly different, as we now need to
read the current counter value to have an absolute deadline
instead of a relative one.
There is a small overhead to this change, which we will address
in the following patches.
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-5-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The RISC-V hypervisor specification doesn't have any virtual timer
feature.
Due to this, the guest VCPU timer will be programmed via SBI calls.
The host will use a separate hrtimer event for each guest VCPU to
provide timer functionality. We inject a virtual timer interrupt to
the guest VCPU whenever the guest VCPU hrtimer event expires.
This patch adds guest VCPU timer implementation along with ONE_REG
interface to access VCPU timer state from user space.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Hyper-V clock/timer code in hyperv_timer.c is mostly independent from
other VMbus drivers, but building for ARM64 without hyperv_timer.c
shows some remaining entanglements. A default implementation of
hv_read_reference_counter can just read a Hyper-V synthetic register
and be independent of hyperv_timer.c, so move this code out and into
hv_common.c. Then it can be used by the timesync driver even if
hyperv_timer.c isn't built on a particular architecture. If
hyperv_timer.c *is* built, it can override with a faster implementation.
Also provide stubs for stimer functions called by the VMbus driver when
hyperv_timer.c isn't built.
No functional changes.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1626220906-22629-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
As we are using cpu_pm to save and restore context, we must also save and
restore the timer sysconfig register TIOCP_CFG. This is needed because
we are not calling PM runtime functions at all with cpu_pm.
Fixes: b34677b099 ("clocksource/drivers/timer-ti-dm: Implement cpu_pm notifier for context save and restore")
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Adam Ford <aford173@gmail.com>
Cc: Andreas Kemnade <andreas@kemnade.info>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210415085506.56828-1-tony@atomide.com
The 'struct samsung_pwm_variant' argument passed to initialization
functions is not modified, so it can be made const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210506202729.157260-2-krzysztof.kozlowski@canonical.com
Cleanup the code to be slightly more readable and follow coding
convention - only whitespace. This fixes checkpatch warnings:
WARNING: Block comments should align the * on each line
WARNING: please, no space before tabs
WARNING: Missing a blank line after declarations
CHECK: Alignment should match open parenthesis
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210506202729.157260-1-krzysztof.kozlowski@canonical.com
The Apple M1 is the processor used it all current generation Apple
Macintosh computers. Support for this platform so far is rudimentary,
but it boots and can use framebuffer and serial console over a special
USB cable.
Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe)
is work in progress but was not ready in time.
A very detailed description of what works is in the merge commit
and on the AsahiLinux wiki.
Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=pBZy
-----END PGP SIGNATURE-----
Merge tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Apple M1 platform support from Arnd Bergmann:
"The Apple M1 is the processor used it all current generation Apple
Macintosh computers. Support for this platform so far is rudimentary,
but it boots and can use framebuffer and serial console over a special
USB cable.
Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe)
is work in progress but was not ready in time.
A very detailed description of what works is in the commit message of
commit 1bb2fd3880 ("Merge tag 'm1-soc-bringup-v5' [..]") and on the
AsahiLinux wiki"
Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/
* tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
asm-generic/io.h: Unbork ioremap_np() declaration
arm64: apple: Add initial Apple Mac mini (M1, 2020) devicetree
dt-bindings: display: Add apple,simple-framebuffer
arm64: Kconfig: Introduce CONFIG_ARCH_APPLE
irqchip/apple-aic: Add support for the Apple Interrupt Controller
dt-bindings: interrupt-controller: Add DT bindings for apple-aic
arm64: Move ICH_ sysreg bits from arm-gic-v3.h to sysreg.h
of/address: Add infrastructure to declare MMIO as non-posted
asm-generic/io.h: implement pci_remap_cfgspace using ioremap_np
arm64: Implement ioremap_np() to map MMIO as nGnRnE
docs: driver-api: device-io: Document ioremap() variants & access funcs
docs: driver-api: device-io: Document I/O access functions
asm-generic/io.h: Add a non-posted variant of ioremap()
arm64: arch_timer: Implement support for interrupt-names
dt-bindings: timer: arm,arch_timer: Add interrupt-names support
arm64: cputype: Add CPU implementor & types for the Apple M1 cores
dt-bindings: arm: cpus: Add apple,firestorm & icestorm compatibles
dt-bindings: arm: apple: Add bindings for Apple ARM platforms
dt-bindings: vendor-prefixes: Add apple prefix
This allows the devicetree to correctly represent the available set of
timers, which varies from device to device, without the need for fake
dummy interrupts for unavailable slots.
Also add the hyp-virt timer/PPI, which is not currently used, but worth
representing.
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
STIMER0 interrupts are most naturally modeled as per-cpu IRQs. But
because x86/x64 doesn't have per-cpu IRQs, the core STIMER0 interrupt
handling machinery is done in code under arch/x86 and Linux IRQs are
not used. Adding support for ARM64 means adding equivalent code
using per-cpu IRQs under arch/arm64.
A better model is to treat per-cpu IRQs as the normal path (which it is
for modern architectures), and the x86/x64 path as the exception. Do this
by incorporating standard Linux per-cpu IRQ allocation into the main
SITMER0 driver code, and bypass it in the x86/x64 exception case. For
x86/x64, special case code is retained under arch/x86, but no STIMER0
interrupt handling code is needed under arch/arm64.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1614721102-2241-11-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Since commit 7484c727b6 ("ARM: realview: delete the RealView board
files") and commit 16956fed35 ("ARM: versatile: switch to DT only
booting and remove legacy code"), there's no one to use the functions
defined or declared in include/clocksource/timer-sp804.h. Delete it.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200918132237.3552-3-thunder.leizhen@huawei.com
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/20200726110117.16346-1-grandmaster@al2klimov.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pwm_omap_dmtimer.h is used only:
- to typedef struct omap_dm_timer to pwm_omap_dmtimer
- for macro PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW_AND_COMPARE
Rest of the file is pretty mush unsed. So reuse omap_dm_timer
and OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE in pwm-omap-dmtimer.c
and delete the header file.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
omap_dm_timer_enable() restores the entire context(including counter)
based on 2 conditions:
- If get_context_loss_count is populated and context is lost.
- If get_context_loss_count is not populated update unconditionally.
Case2 has a side effect of updating the counter register even though
context is not lost. When timer is configured in pwm mode, this is
causing undesired behaviour in the pwm period.
Instead of using get_context_loss_count call back, implement cpu_pm
notifier with context save and restore support. And delete the
get_context_loss_count callback all together.
Suggested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[tony@atomide.com: removed pm_runtime calls from cpuidle calls]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200316111453.15441-1-lokeshvutla@ti.com
Let's add runtime_suspend and resume functions and atomic enabled
flag. This way we can use these when converting to use cpuidle
for saving and restoring device context.
And we need to maintain the driver state in the driver as documented
in "9. Autosuspend, or automatically-delayed suspends" in the
Documentation/power/runtime_pm.rst document related to using driver
private lock and races with runtime_suspend().
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200305082715.15861-3-lokeshvutla@ti.com
hyperv_timer.c exports hyperv_cs, which is used by stimers and the
timesync mechanism. However, the clocksource dependency is not
needed: these mechanisms only depend on the partition reference
counter (which can be read via a MSR or via the TSC Reference Page).
Introduce the (function) pointer hv_read_reference_counter, as an
embodiment of the partition reference counter read, and export it
in place of the hyperv_cs pointer. The latter can be removed.
This should clarify that there's no relationship between Hyper-V
stimers & timesync and the Linux clocksource abstractions. No
functional or semantic change.
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200109160650.16150-2-parri.andrea@gmail.com
Hyper-V has historically initialized stimer-based clockevents late in the
process of onlining a CPU because clockevents depend on stimer
interrupts. In the original Hyper-V design, stimer interrupts generate a
VMbus message, so the VMbus machinery must be running first, and VMbus
can't be initialized until relatively late. On x86/64, LAPIC timer based
clockevents are used during early initialization before VMbus and
stimer-based clockevents are ready, and again during CPU offlining after
the stimer clockevents have been shut down.
Unfortunately, this design creates problems when offlining CPUs for
hibernation or other purposes. stimer-based clockevents are shut down
relatively early in the offlining process, so clockevents_unbind_device()
must be used to fallback to the LAPIC-based clockevents for the remainder
of the offlining process. Furthermore, the late initialization and early
shutdown of stimer-based clockevents doesn't work well on ARM64 since there
is no other timer like the LAPIC to fallback to. So CPU onlining and
offlining doesn't work properly.
Fix this by recognizing that stimer Direct Mode is the normal path for
newer versions of Hyper-V on x86/64, and the only path on other
architectures. With stimer Direct Mode, stimer interrupts don't require any
VMbus machinery. stimer clockevents can be initialized and shut down
consistent with how it is done for other clockevent devices. While the old
VMbus-based stimer interrupts must still be supported for backward
compatibility on x86, that mode of operation can be treated as legacy.
So add a new Hyper-V stimer entry in the CPU hotplug state list, and use
that new state when in Direct Mode. Update the Hyper-V clocksource driver
to allocate and initialize stimer clockevents earlier during boot. Update
Hyper-V initialization and the VMbus driver to use this new design. As a
result, the LAPIC timer is no longer used during boot or CPU
onlining/offlining and clockevents_unbind_device() is not called. But
retain the old design as a legacy implementation for older versions of
Hyper-V that don't support Direct Mode.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lkml.kernel.org/r/1573607467-9456-1-git-send-email-mikelley@microsoft.com
There is no particular reason to not enable TSC page clocksource on
32-bit. mul_u64_u64_shr() is available and despite the increased
computational complexity (compared to 64bit) TSC page is still a huge win
compared to MSR-based clocksource.
In-kernel reads:
MSR based clocksource: 3361 cycles
TSC page clocksource: 49 cycles
Reads from userspace (utilizing vDSO in case of TSC page):
MSR based clocksource: 5664 cycles
TSC page clocksource: 131 cycles
Enabling TSC page on 32bits allows to get rid of CONFIG_HYPERV_TSCPAGE as
it is now not any different from CONFIG_HYPERV_TIMER.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lkml.kernel.org/r/20190822083630.17059-1-vkuznets@redhat.com
Hyper-V clock/timer code and data structures are currently mixed
in with other code in the ISA independent drivers/hv directory as
well as the ISA dependent Hyper-V code under arch/x86.
Consolidate this code and data structures into a Hyper-V clocksource driver
to better follow the Linux model. In doing so, separate out the ISA
dependent portions so the new clocksource driver works for x86 and for the
in-process Hyper-V on ARM64 code.
To start, move the existing clockevents code to create the new clocksource
driver. Update the VMbus driver to call initialization and cleanup routines
since the Hyper-V synthetic timers are not independently enumerated in
ACPI.
No behavior is changed and no new functionality is added.
Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: "bp@alien8.de" <bp@alien8.de>
Cc: "will.deacon@arm.com" <will.deacon@arm.com>
Cc: "catalin.marinas@arm.com" <catalin.marinas@arm.com>
Cc: "mark.rutland@arm.com" <mark.rutland@arm.com>
Cc: "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org>
Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>
Cc: "linux-hyperv@vger.kernel.org" <linux-hyperv@vger.kernel.org>
Cc: "olaf@aepfle.de" <olaf@aepfle.de>
Cc: "apw@canonical.com" <apw@canonical.com>
Cc: "jasowang@redhat.com" <jasowang@redhat.com>
Cc: "marcelo.cerri@canonical.com" <marcelo.cerri@canonical.com>
Cc: Sunil Muthuswamy <sunilmut@microsoft.com>
Cc: KY Srinivasan <kys@microsoft.com>
Cc: "sashal@kernel.org" <sashal@kernel.org>
Cc: "vincenzo.frascino@arm.com" <vincenzo.frascino@arm.com>
Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org>
Cc: "linux-mips@vger.kernel.org" <linux-mips@vger.kernel.org>
Cc: "linux-kselftest@vger.kernel.org" <linux-kselftest@vger.kernel.org>
Cc: "arnd@arndb.de" <arnd@arndb.de>
Cc: "linux@armlinux.org.uk" <linux@armlinux.org.uk>
Cc: "ralf@linux-mips.org" <ralf@linux-mips.org>
Cc: "paul.burton@mips.com" <paul.burton@mips.com>
Cc: "daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org>
Cc: "salyzyn@android.com" <salyzyn@android.com>
Cc: "pcc@google.com" <pcc@google.com>
Cc: "shuah@kernel.org" <shuah@kernel.org>
Cc: "0x7f454c46@gmail.com" <0x7f454c46@gmail.com>
Cc: "linux@rasmusvillemoes.dk" <linux@rasmusvillemoes.dk>
Cc: "huw@codeweavers.com" <huw@codeweavers.com>
Cc: "sfr@canb.auug.org.au" <sfr@canb.auug.org.au>
Cc: "pbonzini@redhat.com" <pbonzini@redhat.com>
Cc: "rkrcmar@redhat.com" <rkrcmar@redhat.com>
Cc: "kvm@vger.kernel.org" <kvm@vger.kernel.org>
Link: https://lkml.kernel.org/r/1561955054-1838-2-git-send-email-mikelley@microsoft.com
Currently the clocksource and clockevent support for davinci platforms
lives in mach-davinci. It hard-codes many things, uses global variables,
implements functionalities unused by any platform and has code fragments
scattered across many (often unrelated) files.
Implement a new, modern and simplified timer driver and put it into
drivers/clocksource. We still need to support legacy board files so
export a config structure and a function that allows machine code to
register the timer.
The timer we're using is 64-bit but can be programmed in dual 32-bit
mode (both chained and unchained).
On all davinci SoCs except for da830 we're using both halves. Lower half
for clockevents and upper half for clocksource. On da830 we're using the
lower half for both with the help of a compare register.
This patch contains the core code and support for clockevent. The
clocksource code will be included in a subsequent patch.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 315 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A host running in VHE mode gets the EL2 physical timer as its time
source (accessed using the EL1 sysreg accessors, which get re-directed
to the EL2 sysregs by VHE).
The EL1 physical timer remains unused by the host kernel, allowing us to
pass that on directly to a KVM guest and saves us from emulating this
timer for the guest on VHE systems.
Store the EL1 Physical Timer's IRQ number in
struct arch_timer_kvm_info on VHE systems to allow KVM to use it.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
This release brings up a new platform based on the old ARM9 core: the
Nuvoton NPCM is used as a baseboard management controller, competing
with the better known ASpeed AST2xx series.
Another important change is the addition of ARMv7-A based chips
in mach-stm32. The older parts in this platform are ARMv7-M based
microcontrollers, now they are expanding to general-purpose workloads.
The other changes are the usual defconfig updates to enable additional
drivers, lesser bugfixes. The largest updates as often are the ongoing
OMAP cleanups, but we also have a number of changes for the older
PXA and davinci platforms this time.
For the Renesas shmobile/r-car platform, some new infrastructure
is needed to make the watchdog work correctly.
Supporting Multiprocessing on Allwinner A80 required a significant
amount of new code, but is not doing anything unexpected.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=HD9V
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"This release brings up a new platform based on the old ARM9 core: the
Nuvoton NPCM is used as a baseboard management controller, competing
with the better known ASpeed AST2xx series.
Another important change is the addition of ARMv7-A based chips in
mach-stm32. The older parts in this platform are ARMv7-M based
microcontrollers, now they are expanding to general-purpose workloads.
The other changes are the usual defconfig updates to enable additional
drivers, lesser bugfixes. The largest updates as often are the ongoing
OMAP cleanups, but we also have a number of changes for the older PXA
and davinci platforms this time.
For the Renesas shmobile/r-car platform, some new infrastructure is
needed to make the watchdog work correctly.
Supporting Multiprocessing on Allwinner A80 required a significant
amount of new code, but is not doing anything unexpected"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits)
arm: npcm: modify configuration for the NPCM7xx BMC.
MAINTAINERS: update entry for ARM/berlin
ARM: omap2: fix am43xx build without L2X0
ARM: davinci: da8xx: simplify CFGCHIP regmap_config
ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data
ARM: multi_v7_defconfig: add NXP FlexCAN IP support
ARM: multi_v7_defconfig: enable thermal driver for i.MX devices
ARM: multi_v7_defconfig: add RN5T618 PMIC family support
ARM: multi_v7_defconfig: add NXP graphics drivers
ARM: multi_v7_defconfig: add GPMI NAND controller support
ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs
ARM: multi_v7_defconfig: configure I2C driver built-in
arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE
ARM: imx: fix imx6sll-only build
ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well
ARM: mxs_defconfig: Re-sync defconfig
ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver
ARM: imx_v4_v5_defconfig: Re-sync defconfig
arm64: defconfig: enable stmmac ethernet to defconfig
ARM: EXYNOS: Simplify code in coupled CPU idle hot path
...
As dmtimer no longer exports functions, make those previously
exported static (this requires few functions to be moved around
as their prototypes were deleted).
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Now that arch/metag/ has been removed, remove the metag generic
per-thread timer driver. It is of no value without the architecture
code.
Signed-off-by: James Hogan <jhogan@kernel.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-metag@vger.kernel.org
