There was an I/O error that prevented reading the last partial block of
large files in an ISO9660 filesystem. The error was generated when a file
comprised more than one section and had a size that was not an exact
multiple of the filesystem block size. This patch removes the check (and
failure) for reading into the last partial block (and possibly beyond) for
multiple-section files.
It worked in my testing to prevent reading beyond the end of the section;
my first patch just incremented the sect_size block count for a partial
block and continued doing the check. But there is a commment in the source
code about reading beyond the end of the file to fill a page cache.
Failing to access beyond the section would prevent reading beyond the end
of the file.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Dquot passes the tty to tty_write_message without locking
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
do_each_thread() is rcu-safe, and all tasks which use this ->mm must sleep
in wait_for_completion(&mm->core_done) at this point, so we can use RCU
locks.
Also, remove unneeded INIT_LIST_HEAD(new) before list_add(new, head).
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
do_each_thread() is rcu-safe, and all tasks which use this ->mm must sleep
in wait_for_completion(&mm->core_done) at this point, so we can use RCU
locks.
Also, remove unneeded INIT_LIST_HEAD(new) before list_add(new, head).
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The problem is that close() syscalls can call a file system's flush
handler, which in turn might sleep interruptibly and ultimately pass back
an -ERESTARTSYS return value. This happens for files backed by an
interruptible NFS mount under nfs_file_flush() when a large file has just
been written and nfs_wait_bit_interruptible() detects that there is a
signal pending.
I have a test case where the "strace" command is used to attach to a
process sleeping in such a close(). Since the SIGSTOP is forced onto the
victim process (removing it from the thread's "blocked" mask in
force_sig_info()), the RPC wait is interrupted and the close() is
terminated early.
But the file table entry has already been cleared before the flush handler
was called. Thus, when the syscall is restarted, the file descriptor
appears closed and an EBADF error is returned (which is wrong). What's
worse, there is the hypothetical case where another thread of a
multi-threaded application might have reused the file descriptor, in which
case that file would be mistakenly closed.
The bottom line is that close() syscalls are not restartable, and thus
-ERESTARTSYS return values should be mapped to -EINTR. This is consistent
with the close(2) manual page. The fix is below.
Signed-off-by: Ernie Petrides <petrides@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The code in __register_chrdev_region checks that if the driver wishing to
register has the same major as an existing driver the new minor range is
strictly less than the existing minor range. However, it does not also
check that the new minor range is strictly greater than the existing minor
range. That is, if driver X has registered with major=x and minor=0-3,
__register_chrdev_region will allow driver Y to register with major=x and
minor=1-4.
Signed-off-by: Amos Waterland <apw@us.ibm.com>
Cc: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fixed race on put_files_struct on exec with proc. Restoring files on
current on error path may lead to proc having a pointer to already kfree-d
files_struct.
->files changing at exit.c and khtread.c are safe as exit_files() makes all
things under lock.
Found during OpenVZ stress testing.
[akpm@osdl.org: add export]
Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Signed-off-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fat is commonly used on removable media. Mounting with -o flush tells the
FS to write things to disk as quickly as possible. It is like -o sync, but
much faster (and not as safe).
Signed-off-by: Chris Mason <mason@suse.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[assuming BSD security levels are deleted]
The only user of i_security, f_security, s_security fields is SELinux,
however, quite a few security modules are trying to get into kernel.
So, wrap them under CONFIG_SECURITY. Adding config option for each
security field is likely an overkill.
Following Stephen Smalley's suggestion, i_security initialization is
moved to security_inode_alloc() to not clutter core code with ifdefs
and make alloc_inode() codepath tiny little bit smaller and faster.
The user of (highly greppable) struct fown_struct::security field is
still to be found. I've checked every "fown_struct" and every "f_owner"
occurence. Additionally it's removal doesn't break i386 allmodconfig
build.
struct inode, struct file, struct super_block, struct fown_struct
become smaller.
P.S. Combined with two reiserfs inode shrinking patches sent to
linux-fsdevel, I can finally suck 12 reiserfs inodes into one page.
/proc/slabinfo
-ext2_inode_cache 388 10
+ext2_inode_cache 384 10
-inode_cache 280 14
+inode_cache 276 14
-proc_inode_cache 296 13
+proc_inode_cache 292 13
-reiser_inode_cache 336 11
+reiser_inode_cache 332 12 <=
-shmem_inode_cache 372 10
+shmem_inode_cache 368 10
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ReiserFS does periodic cleanup of old transactions in order to limit the
length of time a journal replay may take after a crash. Sometimes, writing
metadata from an old (already committed) transaction may require committing
a newer transaction, which also requires writing all data=ordered buffers.
This can cause very long stalls on journal_begin.
This patch makes sure new transactions will not need to be committed before
trying a periodic reclaim of an old transaction. It is low risk because if
a bad decision is made, it just means a slightly longer journal replay
after a crash.
Signed-off-by: Chris Mason <mason@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
make sure that reiserfs_fsync only triggers barriers when mounted with -o
barrier=flush
Signed-off-by: Chris Mason <mason@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There's a bug where a UDF_PART_FLAG_READ_ONLY udf partition gets mounted
read-write, then subsequent problems happen; files seem to be able to be
removed, but file creation results in EIO or worse, oops.
EIO is coming from udf_new_block(), which returns EIO if the right flags
aren't set; only UDF_PART_FLAG_READ_ONLY is set in this case. We probably
s hould not have gotten this far...
Attached patch seems to fix it - and includes a printk to alert the user
that their "rw" mount request has been converted to "ro."
Here's the testcase I used:
[root@magnesium ~]# mkisofs -R -J -udf -o testiso /tmp/
...
Total translation table size: 0
Total rockridge attributes bytes: 342923
Total directory bytes: 382312
Path table size(bytes): 104
Max brk space used 103000
105059 extents written (205 MB)
[root@magnesium ~]# mount -o loop testiso /mnt/test/
[root@magnesium ~]# ls /mnt/test/fsfile
/mnt/test/fsfile
[root@magnesium ~]# rm /mnt/test/fsfile
[root@magnesium ~]# ls /mnt/test/fsfile
ls: /mnt/test/fsfile: No such file or directory
[root@magnesium ~]# touch /mnt/test/fsfile
touch: cannot touch `/mnt/test/fsfile': Input/output error
[root@magnesium tmp]# grep udf /proc/mounts
/dev/loop1 /mnt/test udf rw 0 0
Force readonly mounts of UDF partitions marked as read-only.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The on-disk data structures from AIX are not known, also the filesystem
layout is not known. There is a msdos partition signature at the end of
the first block, and the kernel recognizes 3 small (and overlapping)
partitions. But they are not usable. Maybe the firmware uses it to find
the bootloader for AIX, but AIX boots also if the first block is cleared.
This is the content of the partition table:
# dd if=/dev/sdb count=$(( 4 * 16 )) bs=1 skip=$(( 0x1be )) | xxd
0000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0000010: 80ff ffff 41ff ffff 1b11 0000 381b 0000 ....A.......8...
0000020: 00ff ffff 41ff ffff 0211 0000 1900 0000 ....A...........
0000030: 80ff ffff 41ff ffff 1b11 0000 381b 0000 ....A.......8...
Handle the whole disk as empty disk.
This fixes also YaST which compares the output from parted (and formerly
fdisk) with /proc/partitions. fdisk recognizes the AIX label since a long
time, SuSE has a patch for parted to handle the disk label as unknown.
dmesg will look like this:
sda: [AIX] unknown partition table
Tested on an IBM B50 with AIX V4.3.3.
Signed-off-by: Olaf Hering <olh@suse.de>
Cc: Albert Cahalan <acahalan@gmail.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In the "operation does permission checking" model used by fuse, chdir
permission is not checked, since there's no chdir method.
For this case set a lookup flag, which will be passed to ->permission(), so
fuse can distinguish it from permission checks for other operations.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Some filesystems may want to report different values depending on the path
within the filesystem, i.e. one mount is actually several filesystems. This
can be the case for a network filesystem exported by an unprivileged server
(e.g. sshfs).
This is now possible, thanks to David Howells "VFS: Permit filesystem to
perform statfs with a known root dentry" patch.
This change is backward compatible, so no need to change interface version.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Files supported by fs/proc/base.c, i.e. /proc/<pid>/*, are not capable of
meeting the validity checks in ELF load_elf_*() handling because they have
no mmap handler which is required by ELF. In order to stop a.out
executables being used as part of an exploit attack against /proc-related
vulnerabilities, we make a.out executables depend on ->mmap() existing.
Signed-off-by: Eugene Teo <eteo@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
grab_super gets called with sb_lock held, and releases it. Add a lock
annotation to this function so that sparse can check callers for lock
pairing, and so that sparse will not complain about this function since it
intentionally uses the lock in this manner.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
hugetlbfs_forget_inode releases inode_lock. Add a lock annotation to this
function so that sparse can check callers for lock pairing, and so that
sparse will not complain about this functions since it intentionally uses
the lock in this manner.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
request_end and fuse_read_interrupt release fc->lock. Add lock annotations
to these two functions so that sparse can check callers for lock pairing,
and so that sparse will not complain about these functions since they
intentionally use locks in this manner.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
afs_proc_cell_servers_start acquires a lock, and afs_proc_cell_servers_stop
releases that lock. Add lock annotations to these two functions so that
sparse can check callers for lock pairing, and so that sparse will not
complain about these functions since they intentionally use locks in this
manner.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Only compile with -O1 if the (very old) compiler is broken. We use
reiserfs alot since SLES9 on ppc64, and it was never seen with gcc33.
Assume the broken gcc is gcc-3.4 or older.
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove the unnecessary PageUptodate check from simple_readpage. The only
two callers for ->readpage that don't have explicit PageUptodate check are
read_cache_pages and page_cache_read which operate on newly allocated pages
which don't have the flag set.
[akpm: use the allegedly-faster clear_page(), too]
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Check driver layer errors.
Fix from: "Jun'ichi Nomura" <j-nomura@ce.jp.nec.com>
In blockdevc-check-errors.patch, add_bd_holder() is modified to return error
values when some of its operation failed. Among them, it returns -EEXIST when
a given bd_holder object already exists in the list.
However, in this case, the function completed its work successfully and need
no action by its caller other than freeing unused bd_holder object. So I
think it's better to return success after freeing by itself.
Otherwise, bd_claim-ing with same claim pointer will fail.
Typically, lvresize will fails with following message:
device-mapper: reload ioctl failed: Invalid argument
and you'll see messages like below in kernel log:
device-mapper: table: 254:13: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
Similarly, it should not add bd_holder to the list if either one of symlinking
fails. I don't have a test case for this to happen but it should cause
dereference of freed pointer.
If a matching bd_holder is found in bd_holder_list, add_bd_holder() completes
its job by just incrementing the reference count. In this case, it should be
considered as success but it used to return 'fail' to let the caller free
temporary bd_holder. Fixed it to return success and free given object by
itself.
Also, if either one of symlinking fails, the bd_holder should not be added to
the list so that it can be discarded later. Otherwise, the caller will free
bd_holder which is in the list.
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We leak a bh ref in "journal_init_dev()" in case of failure.
Signed-off-by: Zoltan Menyhart <Zoltan.Menyhart@bull.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It's always good to make symbols static when we can, and this also eliminates
the need to rename the function in jbd2
Suggested by Eric Sandeen.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ingo Oeser pointed out that because current expands to an inline function
it is more space efficient and somewhat faster to simply keep a cached copy
of current in another variable. This patch implements that for the
de_thread function.
(akpm: saves nearly 100 bytes of text on x86)
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In de_thread we move pids from one process to another, a rather ugly case.
The function transfer_pid makes it clear what we are doing, and makes the
action atomic. This is useful we ever want to atomically traverse the
process group and session lists, in a rcu safe manner.
Even if the atomic properties this change should be a win as transfer_pid
should be less code to execute than executing both attach_pid and
detach_pid, and this should make de_thread slightly smaller as only a
single function call needs to be emitted. The only downside is that the
code might be slower to execute as the odds are against transfer_pid being
in cache.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Since sys_sysctl is deprecated start allow it to be compiled out. This
should catch any remaining user space code that cares, and paves the way
for further sysctl cleanups.
[akpm@osdl.org: If sys_sysctl() is not compiled-in, emit a warning]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Since the nolargeio option no longer has any effect, print a warning
instead of setting a write-only variable.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <mason@suse.com>
Cc: Hans Reiser <reiser@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This eliminates the i_blksize field from struct inode. Filesystems that want
to provide a per-inode st_blksize can do so by providing their own getattr
routine instead of using the generic_fillattr() function.
Note that some filesystems were providing pretty much random (and incorrect)
values for i_blksize.
[bunk@stusta.de: cleanup]
[akpm@osdl.org: generic_fillattr() fix]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move the i_cdev pointer in struct inode into a union.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move the i_bdev pointer in struct inode into a union.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The following patches reduce the size of the VFS inode structure by 28 bytes
on a UP x86. (It would be more on an x86_64 system). This is a 10% reduction
in the inode size on a UP kernel that is configured in a production mode
(i.e., with no spinlock or other debugging functions enabled; if you want to
save memory taken up by in-core inodes, the first thing you should do is
disable the debugging options; they are responsible for a huge amount of bloat
in the VFS inode structure).
This patch:
The filesystem or device-specific pointer in the inode is inside a union,
which is pretty pointless given that all 30+ users of this field have been
using the void pointer. Get rid of the union and rename it to i_private, with
a comment to explain who is allowed to use the void pointer. This is just a
cleanup, but it allows us to reuse the union 'u' for something something where
the union will actually be used.
[judith@osdl.org: powerpc build fix]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Judith Lebzelter <judith@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
get_blocks() was removed. So, this removes it on fat, and will take
advantage of the multi block mapping.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
For a long time now I have had a problem with not being able to return a
lookup failure on an existsing directory. In autofs this corresponds to a
mount failure on a autofs managed mount entry that is browsable (and so the
mount point directory exists).
While this problem has been present for a long time I've avoided resolving
it because it was not very visible. But now that autofs v5 has "mount and
expire on demand" of nested multiple mounts, such as is found when mounting
an export list from a server, solving the problem cannot be avoided any
longer.
I've tried very hard to find a way to do this entirely within the autofs4
module but have not been able to find a satisfactory way to achieve it.
So, I need to propose a change to the VFS.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move the fallback arch_vma_name() to a sensible place (kernel/signal.c).
Currently it's in fs/proc/task_mmu.c, a file that is dependent on both
CONFIG_PROC_FS and CONFIG_MMU being enabled, but it's used from
kernel/signal.c from where it is called unconditionally.
[akpm@osdl.org: build fix]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Implement /proc/pid/maps for NOMMU by reading the vm_area_list attached to
current->mm->context.vmlist.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Set the backing device info capabilities for /dev/mem and /dev/kmem to
permit direct sharing under no-MMU conditions and full mapping capabilities
under MMU conditions. Make the BDI used by these available to all directly
mappable character devices.
Also comment the capabilities for /dev/zero.
[akpm@osdl.org: ifdef reductions]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Rougly half of callers already do it by not checking return value
* Code in drivers/acpi/osl.c does the following to be sure:
(void)kmem_cache_destroy(cache);
* Those who check it printk something, however, slab_error already printed
the name of failed cache.
* XFS BUGs on failed kmem_cache_destroy which is not the decision
low-level filesystem driver should make. Converted to ignore.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Some of the changes in balloc.c are just cosmetic, as Andreas pointed out -
if they overflow they'll then underflow and things are fine.
5th hunk actually fixes an overflow problem.
Also check for potential overflows in inode & block counts when resizing.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
