Commit Graph

767 Commits

Author SHA1 Message Date
Linus Torvalds
88ed86fee6 Merge branch 'proc' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc
* 'proc' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc: (35 commits)
  proc: remove fs/proc/proc_misc.c
  proc: move /proc/vmcore creation to fs/proc/vmcore.c
  proc: move pagecount stuff to fs/proc/page.c
  proc: move all /proc/kcore stuff to fs/proc/kcore.c
  proc: move /proc/schedstat boilerplate to kernel/sched_stats.h
  proc: move /proc/modules boilerplate to kernel/module.c
  proc: move /proc/diskstats boilerplate to block/genhd.c
  proc: move /proc/zoneinfo boilerplate to mm/vmstat.c
  proc: move /proc/vmstat boilerplate to mm/vmstat.c
  proc: move /proc/pagetypeinfo boilerplate to mm/vmstat.c
  proc: move /proc/buddyinfo boilerplate to mm/vmstat.c
  proc: move /proc/vmallocinfo to mm/vmalloc.c
  proc: move /proc/slabinfo boilerplate to mm/slub.c, mm/slab.c
  proc: move /proc/slab_allocators boilerplate to mm/slab.c
  proc: move /proc/interrupts boilerplate code to fs/proc/interrupts.c
  proc: move /proc/stat to fs/proc/stat.c
  proc: move rest of /proc/partitions code to block/genhd.c
  proc: move /proc/cpuinfo code to fs/proc/cpuinfo.c
  proc: move /proc/devices code to fs/proc/devices.c
  proc: move rest of /proc/locks to fs/locks.c
  ...
2008-10-23 12:04:37 -07:00
Linus Torvalds
1f6d6e8ebe Merge branch 'v28-range-hrtimers-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'v28-range-hrtimers-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits)
  hrtimers: add missing docbook comments to struct hrtimer
  hrtimers: simplify hrtimer_peek_ahead_timers()
  hrtimers: fix docbook comments
  DECLARE_PER_CPU needs linux/percpu.h
  hrtimers: fix typo
  rangetimers: fix the bug reported by Ingo for real
  rangetimer: fix BUG_ON reported by Ingo
  rangetimer: fix x86 build failure for the !HRTIMERS case
  select: fix alpha OSF wrapper
  select: fix alpha OSF wrapper
  hrtimer: peek at the timer queue just before going idle
  hrtimer: make the futex() system call use the per process slack value
  hrtimer: make the nanosleep() syscall use the per process slack
  hrtimer: fix signed/unsigned bug in slack estimator
  hrtimer: show the timer ranges in /proc/timer_list
  hrtimer: incorporate feedback from Peter Zijlstra
  hrtimer: add a hrtimer_start_range() function
  hrtimer: another build fix
  hrtimer: fix build bug found by Ingo
  hrtimer: make select() and poll() use the hrtimer range feature
  ...
2008-10-23 10:53:02 -07:00
Linus Torvalds
133e887f90 Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: disable the hrtick for now
  sched: revert back to per-rq vruntime
  sched: fair scheduler should not resched rt tasks
  sched: optimize group load balancer
  sched: minor fast-path overhead reduction
  sched: fix the wrong mask_len, cleanup
  sched: kill unused scheduler decl.
  sched: fix the wrong mask_len
  sched: only update rq->clock while holding rq->lock
2008-10-23 09:37:16 -07:00
Alexey Dobriyan
b5aadf7f14 proc: move /proc/schedstat boilerplate to kernel/sched_stats.h
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-10-23 18:06:12 +04:00
Thomas Gleixner
268a3dcfea Merge branch 'timers/range-hrtimers' into v28-range-hrtimers-for-linus-v2
Conflicts:

	kernel/time/tick-sched.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-22 09:48:06 +02:00
Linus Torvalds
92b29b86fe Merge branch 'tracing-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (131 commits)
  tracing/fastboot: improve help text
  tracing/stacktrace: improve help text
  tracing/fastboot: fix initcalls disposition in bootgraph.pl
  tracing/fastboot: fix bootgraph.pl initcall name regexp
  tracing/fastboot: fix issues and improve output of bootgraph.pl
  tracepoints: synchronize unregister static inline
  tracepoints: tracepoint_synchronize_unregister()
  ftrace: make ftrace_test_p6nop disassembler-friendly
  markers: fix synchronize marker unregister static inline
  tracing/fastboot: add better resolution to initcall debug/tracing
  trace: add build-time check to avoid overrunning hex buffer
  ftrace: fix hex output mode of ftrace
  tracing/fastboot: fix initcalls disposition in bootgraph.pl
  tracing/fastboot: fix printk format typo in boot tracer
  ftrace: return an error when setting a nonexistent tracer
  ftrace: make some tracers reentrant
  ring-buffer: make reentrant
  ring-buffer: move page indexes into page headers
  tracing/fastboot: only trace non-module initcalls
  ftrace: move pc counter in irqtrace
  ...

Manually fix conflicts:
 - init/main.c: initcall tracing
 - kernel/module.c: verbose level vs tracepoints
 - scripts/bootgraph.pl: fallout from cherry-picking commits.
2008-10-20 13:35:07 -07:00
Peter Zijlstra
ffda12a17a sched: optimize group load balancer
I noticed that tg_shares_up() unconditionally takes rq-locks for all cpus
in the sched_domain. This hurts.

We need the rq-locks whenever we change the weight of the per-cpu group sched
entities. To allevate this a little, only change the weight when the new
weight is at least shares_thresh away from the old value.

This avoids the rq-lock for the top level entries, since those will never
be re-weighted, and fuzzes the lower level entries a little to gain performance
in semi-stable situations.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-20 14:05:02 +02:00
Thomas Gleixner
c465a76af6 Merge branches 'timers/clocksource', 'timers/hrtimers', 'timers/nohz', 'timers/ntp', 'timers/posixtimers' and 'timers/debug' into v28-timers-for-linus 2008-10-20 13:14:06 +02:00
Arjan van de Ven
651dab4264 Merge commit 'linus/master' into merge-linus
Conflicts:

	arch/x86/kvm/i8254.c
2008-10-17 09:20:26 -07:00
Peter Zijlstra
8cd162ce23 sched: only update rq->clock while holding rq->lock
Vatsa noticed rq->clock going funny and tracked it down to an update_rq_clock()
outside a rq->lock section.

This is a problem because things like double_rq_lock() update the rq->clock
value for both rqs. Therefore disabling interrupts isn't strong enough.

Reported-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-15 20:43:27 +02:00
Mathieu Desnoyers
0a16b60758 tracing, sched: LTTng instrumentation - scheduler
Instrument the scheduler activity (sched_switch, migration, wakeups,
wait for a task, signal delivery) and process/thread
creation/destruction (fork, exit, kthread stop). Actually, kthread
creation is not instrumented in this patch because it is architecture
dependent. It allows to connect tracers such as ftrace which detects
scheduling latencies, good/bad scheduler decisions. Tools like LTTng can
export this scheduler information along with instrumentation of the rest
of the kernel activity to perform post-mortem analysis on the scheduler
activity.

About the performance impact of tracepoints (which is comparable to
markers), even without immediate values optimizations, tests done by
Hideo Aoki on ia64 show no regression. His test case was using hackbench
on a kernel where scheduler instrumentation (about 5 events in code
scheduler code) was added. See the "Tracepoints" patch header for
performance result detail.

Changelog :

- Change instrumentation location and parameter to match ftrace
  instrumentation, previously done with kernel markers.

[ mingo@elte.hu: conflict resolutions ]
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: 'Peter Zijlstra' <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:30:52 +02:00
Ingo Molnar
a5d8c3483a sched debug: add name to sched_domain sysctl entries
add /proc/sys/kernel/sched_domain/cpu0/domain0/name, to make
it easier to see which specific scheduler domain remained at
that entry.

Since we process the scheduler domain tree and
simplify it, it's not always immediately clear during debugging
which domain came from where.

depends on CONFIG_SCHED_DEBUG=y.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-09 17:13:06 +02:00
Li Zefan
34b3ede235 sched: remove redundant code in cpu_cgroup_create()
css will be initialized by cgroup core.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-06 08:13:34 +02:00
Ingo Molnar
2c10c22af0 Merge branch 'linus' into sched/devel 2008-10-06 08:13:18 +02:00
Ingo Molnar
1508487e7f timers: fix itimer/many thread hang, fix
fix bogus rq dereference: v3 removed the locking but also removed the rq
initialization.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 08:28:17 +02:00
Thomas Gleixner
ccc7dadf73 hrtimer: prevent migration of per CPU hrtimers
Impact: per CPU hrtimers can be migrated from a dead CPU

The hrtimer code has no knowledge about per CPU timers, but we need to
prevent the migration of such timers and warn when such a timer is
active at migration time.

Explicitely mark the timers as per CPU and use a more understandable
mode descriptor for the interrupts safe unlocked callback mode, which
is used by hrtimer_sleeper and the scheduler code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-29 17:09:14 +02:00
Frank Mayhar
7086efe1c1 timers: fix itimer/many thread hang, v3
- fix UP lockup
- another set of UP/SMP cleanups and simplifications

Signed-off-by: Frank Mayhar <fmayhar@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-27 20:04:45 +02:00
Peter Zijlstra
4653f803e6 sched: more sanity checks on the bandwidth settings
While playing around with it, I noticed we missed some sanity checks.
Also add some comments while we're there.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-23 16:23:16 +02:00
Ingo Molnar
63e5c39859 Merge branches 'sched/urgent' and 'sched/rt' into sched/devel 2008-09-23 16:23:05 +02:00
Frank Mayhar
bb34d92f64 timers: fix itimer/many thread hang, v2
This is the second resubmission of the posix timer rework patch, posted
a few days ago.

This includes the changes from the previous resubmittion, which addressed
Oleg Nesterov's comments, removing the RCU stuff from the patch and
un-inlining the thread_group_cputime() function for SMP.

In addition, per Ingo Molnar it simplifies the UP code, consolidating much
of it with the SMP version and depending on lower-level SMP/UP handling to
take care of the differences.

It also cleans up some UP compile errors, moves the scheduler stats-related
macros into kernel/sched_stats.h, cleans up a merge error in
kernel/fork.c and has a few other minor fixes and cleanups as suggested
by Oleg and Ingo. Thanks for the review, guys.

Signed-off-by: Frank Mayhar <fmayhar@google.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-23 13:38:44 +02:00
Andrew Morton
006c75f146 sched: clarify ifdef tangle
- Add some comments to try to make the ifdef puzzle a bit clearer

- Explicitly inline one of the three init_hrtick() implementations.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-23 11:02:31 +02:00
Rakib Mullick
fa74820317 sched: fix init_hrtick() section mismatch warning
LD      kernel/built-in.o
WARNING: kernel/built-in.o(.text+0x326): Section mismatch in reference
from the function init_hrtick() to the variable
.cpuinit.data:hotplug_hrtick_nb.8
The function init_hrtick() references
the variable __cpuinitdata hotplug_hrtick_nb.8.
This is often because init_hrtick lacks a __cpuinitdata
annotation or the annotation of hotplug_hrtick_nb.8 is wrong.

Signed-off-by: Md.Rakib H. Mullick <rakib.mullick@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-23 11:02:13 +02:00
Peter Zijlstra
15afe09bf4 sched: wakeup preempt when small overlap
Lin Ming reported a 10% OLTP regression against 2.6.27-rc4.

The difference seems to come from different preemption agressiveness,
which affects the cache footprint of the workload and its effective
cache trashing.

Aggresively preempt a task if its avg overlap is very small, this should
avoid the task going to sleep and find it still running when we schedule
back to it - saving a wakeup.

Reported-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-22 16:28:32 +02:00
Frank Mayhar
f06febc96b timers: fix itimer/many thread hang
Overview

This patch reworks the handling of POSIX CPU timers, including the
ITIMER_PROF, ITIMER_VIRT timers and rlimit handling.  It was put together
with the help of Roland McGrath, the owner and original writer of this code.

The problem we ran into, and the reason for this rework, has to do with using
a profiling timer in a process with a large number of threads.  It appears
that the performance of the old implementation of run_posix_cpu_timers() was
at least O(n*3) (where "n" is the number of threads in a process) or worse.
Everything is fine with an increasing number of threads until the time taken
for that routine to run becomes the same as or greater than the tick time, at
which point things degrade rather quickly.

This patch fixes bug 9906, "Weird hang with NPTL and SIGPROF."

Code Changes

This rework corrects the implementation of run_posix_cpu_timers() to make it
run in constant time for a particular machine.  (Performance may vary between
one machine and another depending upon whether the kernel is built as single-
or multiprocessor and, in the latter case, depending upon the number of
running processors.)  To do this, at each tick we now update fields in
signal_struct as well as task_struct.  The run_posix_cpu_timers() function
uses those fields to make its decisions.

We define a new structure, "task_cputime," to contain user, system and
scheduler times and use these in appropriate places:

struct task_cputime {
	cputime_t utime;
	cputime_t stime;
	unsigned long long sum_exec_runtime;
};

This is included in the structure "thread_group_cputime," which is a new
substructure of signal_struct and which varies for uniprocessor versus
multiprocessor kernels.  For uniprocessor kernels, it uses "task_cputime" as
a simple substructure, while for multiprocessor kernels it is a pointer:

struct thread_group_cputime {
	struct task_cputime totals;
};

struct thread_group_cputime {
	struct task_cputime *totals;
};

We also add a new task_cputime substructure directly to signal_struct, to
cache the earliest expiration of process-wide timers, and task_cputime also
replaces the it_*_expires fields of task_struct (used for earliest expiration
of thread timers).  The "thread_group_cputime" structure contains process-wide
timers that are updated via account_user_time() and friends.  In the non-SMP
case the structure is a simple aggregator; unfortunately in the SMP case that
simplicity was not achievable due to cache-line contention between CPUs (in
one measured case performance was actually _worse_ on a 16-cpu system than
the same test on a 4-cpu system, due to this contention).  For SMP, the
thread_group_cputime counters are maintained as a per-cpu structure allocated
using alloc_percpu().  The timer functions update only the timer field in
the structure corresponding to the running CPU, obtained using per_cpu_ptr().

We define a set of inline functions in sched.h that we use to maintain the
thread_group_cputime structure and hide the differences between UP and SMP
implementations from the rest of the kernel.  The thread_group_cputime_init()
function initializes the thread_group_cputime structure for the given task.
The thread_group_cputime_alloc() is a no-op for UP; for SMP it calls the
out-of-line function thread_group_cputime_alloc_smp() to allocate and fill
in the per-cpu structures and fields.  The thread_group_cputime_free()
function, also a no-op for UP, in SMP frees the per-cpu structures.  The
thread_group_cputime_clone_thread() function (also a UP no-op) for SMP calls
thread_group_cputime_alloc() if the per-cpu structures haven't yet been
allocated.  The thread_group_cputime() function fills the task_cputime
structure it is passed with the contents of the thread_group_cputime fields;
in UP it's that simple but in SMP it must also safely check that tsk->signal
is non-NULL (if it is it just uses the appropriate fields of task_struct) and,
if so, sums the per-cpu values for each online CPU.  Finally, the three
functions account_group_user_time(), account_group_system_time() and
account_group_exec_runtime() are used by timer functions to update the
respective fields of the thread_group_cputime structure.

Non-SMP operation is trivial and will not be mentioned further.

The per-cpu structure is always allocated when a task creates its first new
thread, via a call to thread_group_cputime_clone_thread() from copy_signal().
It is freed at process exit via a call to thread_group_cputime_free() from
cleanup_signal().

All functions that formerly summed utime/stime/sum_sched_runtime values from
from all threads in the thread group now use thread_group_cputime() to
snapshot the values in the thread_group_cputime structure or the values in
the task structure itself if the per-cpu structure hasn't been allocated.

Finally, the code in kernel/posix-cpu-timers.c has changed quite a bit.
The run_posix_cpu_timers() function has been split into a fast path and a
slow path; the former safely checks whether there are any expired thread
timers and, if not, just returns, while the slow path does the heavy lifting.
With the dedicated thread group fields, timers are no longer "rebalanced" and
the process_timer_rebalance() function and related code has gone away.  All
summing loops are gone and all code that used them now uses the
thread_group_cputime() inline.  When process-wide timers are set, the new
task_cputime structure in signal_struct is used to cache the earliest
expiration; this is checked in the fast path.

Performance

The fix appears not to add significant overhead to existing operations.  It
generally performs the same as the current code except in two cases, one in
which it performs slightly worse (Case 5 below) and one in which it performs
very significantly better (Case 2 below).  Overall it's a wash except in those
two cases.

I've since done somewhat more involved testing on a dual-core Opteron system.

Case 1: With no itimer running, for a test with 100,000 threads, the fixed
	kernel took 1428.5 seconds, 513 seconds more than the unfixed system,
	all of which was spent in the system.  There were twice as many
	voluntary context switches with the fix as without it.

Case 2: With an itimer running at .01 second ticks and 4000 threads (the most
	an unmodified kernel can handle), the fixed kernel ran the test in
	eight percent of the time (5.8 seconds as opposed to 70 seconds) and
	had better tick accuracy (.012 seconds per tick as opposed to .023
	seconds per tick).

Case 3: A 4000-thread test with an initial timer tick of .01 second and an
	interval of 10,000 seconds (i.e. a timer that ticks only once) had
	very nearly the same performance in both cases:  6.3 seconds elapsed
	for the fixed kernel versus 5.5 seconds for the unfixed kernel.

With fewer threads (eight in these tests), the Case 1 test ran in essentially
the same time on both the modified and unmodified kernels (5.2 seconds versus
5.8 seconds).  The Case 2 test ran in about the same time as well, 5.9 seconds
versus 5.4 seconds but again with much better tick accuracy, .013 seconds per
tick versus .025 seconds per tick for the unmodified kernel.

Since the fix affected the rlimit code, I also tested soft and hard CPU limits.

Case 4: With a hard CPU limit of 20 seconds and eight threads (and an itimer
	running), the modified kernel was very slightly favored in that while
	it killed the process in 19.997 seconds of CPU time (5.002 seconds of
	wall time), only .003 seconds of that was system time, the rest was
	user time.  The unmodified kernel killed the process in 20.001 seconds
	of CPU (5.014 seconds of wall time) of which .016 seconds was system
	time.  Really, though, the results were too close to call.  The results
	were essentially the same with no itimer running.

Case 5: With a soft limit of 20 seconds and a hard limit of 2000 seconds
	(where the hard limit would never be reached) and an itimer running,
	the modified kernel exhibited worse tick accuracy than the unmodified
	kernel: .050 seconds/tick versus .028 seconds/tick.  Otherwise,
	performance was almost indistinguishable.  With no itimer running this
	test exhibited virtually identical behavior and times in both cases.

In times past I did some limited performance testing.  those results are below.

On a four-cpu Opteron system without this fix, a sixteen-thread test executed
in 3569.991 seconds, of which user was 3568.435s and system was 1.556s.  On
the same system with the fix, user and elapsed time were about the same, but
system time dropped to 0.007 seconds.  Performance with eight, four and one
thread were comparable.  Interestingly, the timer ticks with the fix seemed
more accurate:  The sixteen-thread test with the fix received 149543 ticks
for 0.024 seconds per tick, while the same test without the fix received 58720
for 0.061 seconds per tick.  Both cases were configured for an interval of
0.01 seconds.  Again, the other tests were comparable.  Each thread in this
test computed the primes up to 25,000,000.

I also did a test with a large number of threads, 100,000 threads, which is
impossible without the fix.  In this case each thread computed the primes only
up to 10,000 (to make the runtime manageable).  System time dominated, at
1546.968 seconds out of a total 2176.906 seconds (giving a user time of
629.938s).  It received 147651 ticks for 0.015 seconds per tick, still quite
accurate.  There is obviously no comparable test without the fix.

Signed-off-by: Frank Mayhar <fmayhar@google.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-14 16:25:35 +02:00
Ingo Molnar
09b22a2f67 Merge commit 'v2.6.27-rc6' into sched/devel 2008-09-11 13:37:28 +02:00
Hiroshi Shimamoto
ec5d498991 sched: fix deadlock in setting scheduler parameter to zero
Andrei Gusev wrote:

> I played witch scheduler settings. After doing something like:
> echo -n 1000000 >sched_rt_period_us
>
> command is locked. I found in kernel.log:
>
> Sep 11 00:39:34 zaratustra
> Sep 11 00:39:34 zaratustra Pid: 4495, comm: bash Tainted: G        W
> (2.6.26.3 #12)
> Sep 11 00:39:34 zaratustra EIP: 0060:[<c0213fc7>] EFLAGS: 00210246 CPU: 0
> Sep 11 00:39:34 zaratustra EIP is at div64_u64+0x57/0x80
> Sep 11 00:39:34 zaratustra EAX: 0000389f EBX: 00000000 ECX: 00000000
> EDX: 00000000
> Sep 11 00:39:34 zaratustra ESI: d9800000 EDI: d9800000 EBP: 0000389f
> ESP: ea7a6edc
> Sep 11 00:39:34 zaratustra DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
> Sep 11 00:39:34 zaratustra Process bash (pid: 4495, ti=ea7a6000
> task=ea744000 task.ti=ea7a6000)
> Sep 11 00:39:34 zaratustra Stack: 00000000 000003e8 d9800000 0000389f
> c0119042 00000000 00000000 00000001
> Sep 11 00:39:34 zaratustra 00000000 00000000 ea7a6f54 00010000 00000000
> c04d2e80 00000001 000e7ef0
> Sep 11 00:39:34 zaratustra c01191a3 00000000 00000000 ea7a6fa0 00000001
> ffffffff c04d2e80 ea5b2480
> Sep 11 00:39:34 zaratustra Call Trace:
> Sep 11 00:39:34 zaratustra [<c0119042>] __rt_schedulable+0x52/0x130
> Sep 11 00:39:34 zaratustra [<c01191a3>] sched_rt_handler+0x83/0x120
> Sep 11 00:39:34 zaratustra [<c01a76a6>] proc_sys_call_handler+0xb6/0xd0
> Sep 11 00:39:34 zaratustra [<c01a76c0>] proc_sys_write+0x0/0x20
> Sep 11 00:39:34 zaratustra [<c01a76d9>] proc_sys_write+0x19/0x20
> Sep 11 00:39:34 zaratustra [<c016cc68>] vfs_write+0xa8/0x140
> Sep 11 00:39:34 zaratustra [<c016cdd1>] sys_write+0x41/0x80
> Sep 11 00:39:34 zaratustra [<c0103051>] sysenter_past_esp+0x6a/0x91
> Sep 11 00:39:34 zaratustra =======================
> Sep 11 00:39:34 zaratustra Code: c8 41 0f ad f3 d3 ee f6 c1 20 0f 45 de
> 31 f6 0f ad ef d3 ed f6 c1 20 0f 45 fd 0f 45 ee 31 c9 39 eb 89 fe 89 ea
> 77 08 89 e8 31 d2 <f7> f3 89 c1 89 f0 8b 7c 24 08 f7 f3 8b 74 24 04 89
> ca 8b 1c 24
> Sep 11 00:39:34 zaratustra EIP: [<c0213fc7>] div64_u64+0x57/0x80 SS:ESP
> 0068:ea7a6edc
> Sep 11 00:39:34 zaratustra ---[ end trace 4eaa2a86a8e2da22 ]---

fix the boundary condition.

sysctl_sched_rt_period=0 makes exception at to_ratio().

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-11 09:39:18 +02:00
Ingo Molnar
291c54ff76 Merge branch 'sched/cpuset' into sched/urgent 2008-09-06 21:03:16 +02:00
Max Krasnyansky
dfb512ec48 sched: arch_reinit_sched_domains() must destroy domains to force rebuild
What I realized recently is that calling rebuild_sched_domains() in
arch_reinit_sched_domains() by itself is not enough when cpusets are enabled.
partition_sched_domains() code is trying to avoid unnecessary domain rebuilds
and will not actually rebuild anything if new domain masks match the old ones.

What this means is that doing
     echo 1 > /sys/devices/system/cpu/sched_mc_power_savings
on a system with cpusets enabled will not take affect untill something changes
in the cpuset setup (ie new sets created or deleted).

This patch fixes restore correct behaviour where domains must be rebuilt in
order to enable MC powersaving flags.

Test on quad-core Core2 box with both CONFIG_CPUSETS and !CONFIG_CPUSETS.
Also tested on dual-core Core2 laptop. Lockdep is happy and things are working
as expected.

Signed-off-by: Max Krasnyansky <maxk@qualcomm.com>
Tested-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-06 19:22:15 +02:00
Ingo Molnar
7f79d852ed Merge branch 'linus' into sched/devel 2008-09-06 16:51:57 +02:00
Krzysztof Helt
c8bfff6dd4 sched: compilation fix with gcc 3.4.6
I found that 2.6.27-rc5-mm1 does not compile with gcc 3.4.6.
The error is:
  CC      kernel/sched.o
kernel/sched.c: In function `start_rt_bandwidth':
kernel/sched.c:208: sorry, unimplemented: inlining failed in call to 'rt_bandwidth_enabled': function body not available
kernel/sched.c:214: sorry, unimplemented: called from here
make[1]: *** [kernel/sched.o] Error 1
make: *** [kernel] Error 2

It seems that the gcc 3.4.6 requires full inline definition before first usage.
The patch below fixes the compilation problem.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> (if needed>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-06 15:17:09 +02:00
Arjan van de Ven
cc584b213f hrtimer: convert kernel/* to the new hrtimer apis
In order to be able to do range hrtimers we need to use accessor functions
to the "expire" member of the hrtimer struct.
This patch converts kernel/* to these accessors.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-09-05 21:35:13 -07:00
Balbir Singh
49048622ea sched: fix process time monotonicity
Spencer reported a problem where utime and stime were going negative despite
the fixes in commit b27f03d4bd. The suspected
reason for the problem is that signal_struct maintains it's own utime and
stime (of exited tasks), these are not updated using the new task_utime()
routine, hence sig->utime can go backwards and cause the same problem
to occur (sig->utime, adds tsk->utime and not task_utime()). This patch
fixes the problem

TODO: using max(task->prev_utime, derived utime) works for now, but a more
generic solution is to implement cputime_max() and use the cputime_gt()
function for comparison.

Reported-by: spencer@bluehost.com
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-05 18:14:35 +02:00
Ingo Molnar
7940ca3605 sched: extract walk_tg_tree(), fix
fix:

 kernel/sched.c: In function '__rt_schedulable':
 kernel/sched.c:8771: error: implicit declaration of function 'walk_tg_tree'
 kernel/sched.c:8771: error: 'tg_nop' undeclared (first use in this function)
 kernel/sched.c:8771: error: (Each undeclared identifier is reported only once
 kernel/sched.c:8771: error: for each function it appears in.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 12:08:00 +02:00
Ingo Molnar
aef745fca0 sched: clean up __might_sleep()
add KERN_ to the printout and clean up the flow a bit.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:36:03 +02:00
Joe Korty
29cbef4869 make might_sleep() display the oopsing process
Expand might_sleep's printk to indicate the oopsing process.

Signed-off-by: Joe Korty <joe.korty@ccur.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:36:02 +02:00
Kevin Diggs
65eb3dc609 sched: add kernel doc for the completion, fix kernel-doc-nano-HOWTO.txt
This patch adds kernel doc for the completion feature.

An error in the split-man.pl PERL snippet in kernel-doc-nano-HOWTO.txt is
also fixed.

Signed-off-by: Kevin Diggs <kevdig@hypersurf.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-26 10:26:54 +02:00
Ingo Molnar
3cf430b063 Merge branch 'linus' into sched/devel 2008-08-26 10:25:59 +02:00
Oleg Nesterov
93dcf55f82 wait_task_inactive: "improve" the returned value for ->nvcsw == 0
wait_task_inactive() returns 1 when p->nvcsw == 0 || p->nvcsw == 1.  This
means that two subsequent calls can return the same number while the task
was scheduled in between.

Change the code to return "nvcsw | LONG_MIN" instead of "nvcsw ?: 1", now
the overlap always needs LONG_MAX schedules.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-22 15:17:31 +02:00
Oleg Nesterov
f31e11d87a wait_task_inactive(): don't consider task->nivcsw
If wait_task_inactive() returns success the task was deactivated.  In that
case schedule() always increments ->nvcsw which alone can be used as a
"generation counter".

If the next call returns the same number, we can be sure that the task was
unscheduled.  Otherwise, because we know that .on_rq == 0 again, ->nvcsw
should have been changed in between.

Q: perhaps it is better to do "ncsw = (p->nvcsw << 1) | 1" ?  This
decreases the possibility of "was it unscheduled" false positive when
->nvcsw == 0.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-22 15:17:29 +02:00
Oleg Nesterov
94d3d8247d sched: do_wait_for_common: use signal_pending_state()
Change do_wait_for_common() to use signal_pending_state() instead of open
coding.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-22 15:17:28 +02:00
Peter Zijlstra
9a7e0b180d sched: rt-bandwidth fixes
The last patch allows sysctl_sched_rt_runtime to disable bandwidth accounting
for the group scheduler - however it doesn't deal with sched_setscheduler(),
which will keep tasks out of groups that have no assigned runtime.

If we relax this, we get into the situation where RT tasks can get into a group
when we disable bandwidth control, and then starve them by enabling it again.

Rework the schedulability code to check for this condition and fail to turn
on bandwidth control with -EBUSY when this situation is found.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-19 13:10:12 +02:00
Peter Zijlstra
eb755805f2 sched: extract walk_tg_tree()
Extract walk_tg_tree() and make it a little more generic so we can use it
in the schedulablity test.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-19 13:10:11 +02:00
Peter Zijlstra
0b148fa048 sched: rt-bandwidth group disable fixes
More extensive disable of bandwidth control. It allows sysctl_sched_rt_runtime
to disable full group bandwidth control.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-19 13:10:10 +02:00
Linus Torvalds
c100548d46 Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: scale sysctl_sched_shares_ratelimit with nr_cpus
  sched: fix rt-bandwidth hotplug race
  sched: fix the race between walk_tg_tree and sched_create_group
2008-08-16 17:15:32 -07:00
Peter Zijlstra
55cd53404c sched: scale sysctl_sched_shares_ratelimit with nr_cpus
David reported that his Niagra spend a little too much time in
tg_shares_up(), which considering he has a large cpu count makes sense.

So scale the ratelimit value with the number of cpus like we do for
other controls as well.

Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15 18:25:07 +02:00
Dave Chinner
be4de35263 completions: uninline try_wait_for_completion and completion_done
m68k fails to build with these functions inlined in completion.h.  Move
them out of line into sched.c and export them to avoid this problem.

Signed-off-by: Dave Chinner <david@fromorbit.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15 08:35:44 -07:00
Zhang, Yanmin
09f2724a78 sched: fix the race between walk_tg_tree and sched_create_group
With 2.6.27-rc3, I hit a kernel panic when running volanoMark on my
new x86_64 machine. I also hit it with other 2.6.27-rc kernels.
See below log.

Basically, function walk_tg_tree and sched_create_group have a race
between accessing and initiating tg->children. Below patch fixes it
by moving tg->children initiation to the front of linking tg->siblings
to parent->children.

{----------------panic log------------}

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
IP: [<ffffffff802292ab>] walk_tg_tree+0x45/0x7f
PGD 1be1c4067 PUD 1bdd8d067 PMD 0
Oops: 0000 [1] SMP
CPU 11
Modules linked in: igb
Pid: 22979, comm: java Not tainted 2.6.27-rc3 #1
RIP: 0010:[<ffffffff802292ab>]  [<ffffffff802292ab>] walk_tg_tree+0x45/0x7f
RSP: 0018:ffff8801bfbbbd18  EFLAGS: 00010083
RAX: 0000000000000000 RBX: ffff8800be0dce40 RCX: ffffffffffffffc0
RDX: ffff880102c43740 RSI: 0000000000000000 RDI: ffff8800be0dce40
RBP: ffff8801bfbbbd48 R08: ffff8800ba437bc8 R09: 0000000000001f40
R10: ffff8801be812100 R11: ffffffff805fdf44 R12: ffff880102c43740
R13: 0000000000000000 R14: ffffffff8022cf0f R15: ffffffff8022749f
FS:  00000000568ac950(0063) GS:ffff8801bfa26d00(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 00000001bd848000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process java (pid: 22979, threadinfo ffff8801b145a000, task ffff8801bf18e450)
Stack:  0000000000000001 ffff8800ba5c8d60 0000000000000001 0000000000000001
 ffff8800bad1ccb8 0000000000000000 ffff8801bfbbbd98 ffffffff8022ed37
 0000000000000001 0000000000000286 ffff8801bd5ee180 ffff8800ba437bc8
Call Trace:
 <IRQ>  [<ffffffff8022ed37>] try_to_wake_up+0x71/0x24c
 [<ffffffff80247177>] autoremove_wake_function+0x9/0x2e
 [<ffffffff80228039>] ? __wake_up_common+0x46/0x76
 [<ffffffff802296d5>] __wake_up+0x38/0x4f
 [<ffffffff806169cc>] tcp_v4_rcv+0x380/0x62e

Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-14 10:58:48 +02:00
Linus Torvalds
1ea2950884 Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched, cpu hotplug: fix set_cpus_allowed() use in hotplug callbacks
  sched: fix mysql+oltp regression
  sched_clock: delay using sched_clock()
  sched clock: couple local and remote clocks
  sched clock: simplify __update_sched_clock()
  sched: eliminate scd->prev_raw
  sched clock: clean up sched_clock_cpu()
  sched clock: revert various sched_clock() changes
  sched: move sched_clock before first use
  sched: test runtime rather than period in global_rt_runtime()
  sched: fix SCHED_HRTICK dependency
  sched: fix warning in hrtick_start_fair()
2008-08-11 16:46:31 -07:00
Ingo Molnar
23a0ee908c Merge branch 'core/locking' into core/urgent 2008-08-12 00:11:49 +02:00
Ingo Molnar
251a169c69 Merge branch 'linus' into sched/urgent 2008-08-11 13:40:56 +02:00