This patch adds a new feature to enable the validation of input data
to control elements in the ALSA core side. When
CONFIG_SND_CTL_INPUT_VALIDATION is set, ALSA core verifies whether the
each input value via control API is in the defined ranges, also checks
whether it's aligned to the defined steps. If an invalid value is
detected, ALSA core returns -EINVAL error immediately without passing
further to the driver's callback. So this is a kind of hardening for
(badly written) drivers that have no proper error checks, at the cost
of a slight performance overhead.
Technically seen, this reuses a part of the existing validation code
for CONFIG_SND_CTL_DEBUG case with a slight modification to suppress
error prints for the input validation.
Link: https://lore.kernel.org/r/20220609120219.3937-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The purpose of CONFIG_SND_CTL_VALIDATION is rather to enable the
debugging feature for the control API. The validation is only a part
of it. Let's rename it to be more explicit and intuitive.
While we're at it, let's advertise, give more comment to recommend
this feature for development in the kconfig help text.
Link: https://lore.kernel.org/r/20220609120219.3937-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The control elements are managed in a single linked list and we
traverse the whole list for matching each numid or ctl id per every
inquiry of a control element. This is OK-ish for a small number of
elements but obviously it doesn't scale. Especially the matching with
the ctl id takes time because it checks each field of the snd_ctl_id
element, e.g. the name string is matched with strcmp().
This patch adds the hash tables with Xarray for improving the lookup
speed of a control element. There are two xarray tables added to the
card; one for numid and another for ctl id. For the numid, we use the
numid as the index, while for the ctl id, we calculate a hash key.
The lookup is done via a single xa_load() execution. As long as the
given control element is found on the Xarray table, that's fine, we
can give back a quick lookup result. The problem is when no entry
hits on the table, and for this case, we have a slight optimization.
Namely, the driver checks whether we had a collision on Xarray table,
and do a fallback search (linear lookup of the full entries) only if a
hash key collision happened beforehand.
So, in theory, the inquiry for a non-existing element might take still
time even with this patch in a worst case, but this must be pretty
rare.
The feature is enabled via CONFIG_SND_CTL_FAST_LOOKUP, which is turned
on as default. For simplicity, the option can be turned off only when
CONFIG_EXPERT is set ("You are expert? Then you manage 1000 knobs").
Link: https://lore.kernel.org/r/20211028130027.18764-1-tiwai@suse.de
Link: https://lore.kernel.org/r/20220609180504.775-1-tiwai@suse.de
Link: https://lore.kernel.org/all/cover.1653813866.git.quic_rbankapu@quicinc.com/
Link: https://lore.kernel.org/r/20220610064537.18660-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent laptops have usually two LEDs assigned to reflect
the speaker and microphone mute state. This implementation
adds a tiny layer on top of the control API which calculates
the state for those LEDs using the driver callbacks.
Two new access flags are introduced to describe the controls
which affects the audio path settings (an easy code change
for drivers).
The LED resource can be shared with multiple sound cards with
this code. The user space controls may be added to the state
chain on demand, too.
This code should replace the LED code in the HDA driver and
add a possibility to easy extend the other drivers (ASoC
codecs etc.).
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-4-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This change adds audio jack injection feature through debugfs, with
this feature, we could validate alsa userspace changes by injecting
plugin or plugout events to the non-phantom audio jacks.
With this change, the sound core will build the folders
$debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled.
And if users also enable the SND_JACK_INJECTION_DEBUG, the jack
injection nodes will be built in the folder cardN like below:
$tree $debugfs_mount_dir/sound
$debugfs_mount_dir/sound
├── card0
│ ├── HDMI_DP_pcm_10_Jack
│ │ ├── jackin_inject
│ │ ├── kctl_id
│ │ ├── mask_bits
│ │ ├── status
│ │ ├── sw_inject_enable
│ │ └── type
...
│ └── HDMI_DP_pcm_9_Jack
│ ├── jackin_inject
│ ├── kctl_id
│ ├── mask_bits
│ ├── status
│ ├── sw_inject_enable
│ └── type
└── card1
├── HDMI_DP_pcm_5_Jack
│ ├── jackin_inject
│ ├── kctl_id
│ ├── mask_bits
│ ├── status
│ ├── sw_inject_enable
│ └── type
...
├── Headphone_Jack
│ ├── jackin_inject
│ ├── kctl_id
│ ├── mask_bits
│ ├── status
│ ├── sw_inject_enable
│ └── type
└── Headset_Mic_Jack
├── jackin_inject
├── kctl_id
├── mask_bits
├── status
├── sw_inject_enable
└── type
The nodes kctl_id, mask_bits, status and type are read-only, users
could check jack or jack_kctl's information through them.
The nodes sw_inject_enable and jackin_inject are directly used for
injection. The sw_inject_enable is read-write, users could check if
software injection is enabled or not on this jack, and users could
echo 1 or 0 to enable or disable software injection on this jack. Once
the injection is enabled, the jack will not change by hardware events
anymore, once the injection is disabled, the jack will restore the
last reported hardware events to the jack. The jackin_inject is
write-only, if the injection is enabled, users could echo 1 or 0 to
this node to inject plugin or plugout events to this jack.
For the detailed usage information on these nodes, please refer to
Documentation/sound/designs/jack-injection.rst.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current implementation of ALSA control API fully relies on the
callbacks of each driver, and there is no verification of the values
passed via API. This patch is an attempt to improve the situation
slightly by adding the validation code for the values stored via info
and get callbacks.
The patch adds a new kconfig, CONFIG_SND_CTL_VALIDATION. It depends
on CONFIG_SND_DEBUG and off as default since the validation would
require a slight overhead including the additional call of info
callback at each get callback invocation.
When this config is enabled, the values stored by each info callback
invocation are verified, namely:
- Whether the info type is valid
- Whether the number of enum items is non-zero
- Whether the given info count is within the allowed boundary
Similarly, the values stored at each get callback are verified as
well:
- Whether the values are within the given range
- Whether the values are aligned with the given step
- Whether any further changes are seen in the data array over the
given info count
The last point helps identifying a possibly invalid data type access,
typically a case where the info callback declares the type being
SNDRV_CTL_ELEM_TYPE_ENUMERATED while the get/put callbacks store
the values in value.integer.value[] array.
When a validation fails, the ALSA core logs an error message including
the device and the control ID, and the API call also returns an
error. So, with the new validation turned on, the driver behavior
difference may be visible on user-space, too -- it's intentional,
though, so that we can catch an error more clearly.
The patch also introduces a new ctl access type,
SNDRV_CTL_ELEM_ACCESS_SKIP_CHECK. A driver may pass this flag with
other access bits to indicate that the ctl element won't be verified.
It's useful when a driver code is specially written to access the data
greater than info->count size by some reason. For example, this flag
is actually set now in HD-audio HDMI codec driver which needs to clear
the data array in the case of the disconnected monitor.
Also, the PCM channel-map helper code is slightly modified to avoid
the false-positive hit by this validation code, too.
Link: https://lore.kernel.org/r/20200104083556.27789-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191004144931.3851-1-krzk@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As we move stuff around, some doc references are broken. Fix some of
them via this script:
./scripts/documentation-file-ref-check --fix
Manually checked if the produced result is valid, removing a few
false-positives.
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Many drivers bind the sequencer stuff in off-load by another driver
module, so that it's loaded only on demand. In the current code, this
mechanism doesn't work when the driver is built-in while the sequencer
is module. We check with IS_REACHABLE() and enable only when the
sequencer is in the same level of build.
However, this is basically a overshoot. The binder code
(snd-seq-device) is an individual module from the sequencer core
(snd-seq), and we just have to make the former a built-in while
keeping the latter a module for allowing the scenario like the above.
This patch achieves that by rewriting Kconfig slightly. Now, a driver
that provides the manual sequencer device binding should select
CONFIG_SND_SEQ_DEVICE in a way as
select SND_SEQ_DEVICE if SND_SEQUENCER != n
Note that the "!=n" is needed here to avoid the influence of the
sequencer core is module while the driver is built-in.
Also, since rawmidi.o may be linked with snd_seq_device.o when
built-in, we have to shuffle the code to make the linker happy.
(the kernel linker isn't smart enough yet to handle such a case.)
That is, snd_seq_device.c is moved to sound/core from sound/core/seq,
as well as Makefile.
Last but not least, the patch replaces the code using IS_REACHABLE()
with IS_ENABLED(), since now the condition meets always when enabled.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a slightly intensive rewrite of Kconfig and Makefile about
ALSA sequencer stuff.
The first major change is that the kconfig items for the sequencer are
moved to sound/core/seq/Kconfig. OK, that's easy.
The substantial change is that, instead of hackish top-level module
selection in Makefile, we define a Kconfig item for each sequencer
module. The driver that requires such sequencer components select
exclusively the kconfig items. This is more straightforward and
standard way.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently OSS sequencer emulation is tied with ALSA sequencer core,
both are built in the same level; i.e. when CONFIG_SND_SEQUENCER=y,
the OSS sequencer emulation is also always built-in, even though the
functionality can be built as an individual module.
This patch changes the rule and allows users to build snd-seq-oss
module while others are built-in. Essentially, it's just a few simple
changes in Kconfig and Makefile. Some driver codes like opl3 need to
convert from the simple ifdef to IS_ENABLED(). But that's all.
You might wonder how about the dependency: right, it can be messy, but
it still works. Since we rewrote the sequencer binding with the
standard bus, the driver can be bound at any time on demand. So, the
synthesizer driver module can be loaded individually from the OSS
emulation core before/after it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently CONFIG_SND_OSSEMUL is selected by each config like
CONFIG_SND_PCM_OSS. But, as see in the raw MIDI code that is built
conditionally with CONFIG_SND_OSSEMUL, we should rather make
CONFIG_SND_OSSEMUL user-selectable as the top kconfig item, and leave
the rest depending on it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are no users of rtctimer left. Remove its code as this is the
in-kernel user of the legacy PC RTC driver that will hopefully be removed
at some point.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since the recent integration of kctl jack and input jack layers, we
can basically build the jack layer even without input devices. That
is, the jack layer itself can be built with conditional to enable the
input device support or not, while the users may enable always
CONFIG_SND_JACK unconditionally.
For achieving it, this patch changes the following:
- A new Kconfig, CONFIG_SND_JACK_INPUT_DEV, was introduced to indicate
whether the jack layer supports the input device,
- A few items in snd_jack struct and relevant codes are conditionally
built upon CONFIG_SND_JACK_INPUT_DEV,
- The users of CONFIG_SND_JACK drop the messy dependency on
CONFIG_INPUT.
This change also automagically fixes a potential bug in HD-audio
driver Arnd reported, where the NULL or uninitialized jack instance is
dereferenced.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
PCM timer is not always used. For embedded device, we need an interface
to disable it when it is not needed, to shrink the kernel size and
memory footprint, here add CONFIG_SND_PCM_TIMER for it.
When both CONFIG_SND_PCM_TIMER and CONFIG_SND_TIMER is unselected,
about 25KB saving bonus we can get.
Please be noted that when disabled, those stubs who using pcm timer
(e.g. dmix, dsnoop & co) may work incorrectlly.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For some embedded devices, we need reduce code size and data
footprint as much as possible, e.g. disabling procfs, hw/sw
params refinement, mmap, dpcm, dapm, compressed API...
Here add SND_PROC_FS item for expert, we can unselect it to
disable sound proc FS and reduce memory footprint.
Signed-off-by: Jie Yang <yang.jie@intel.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a helper to create the IEC958 channel status from an ALSA
snd_pcm_runtime structure, taking account of the sample rate and
sample size.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviwed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a helper for the EDID like data structure, which is typically passed
from a HDMI adapter to its associated audio driver. This informs the
audio driver of the capabilities of the attached HDMI sink.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the ALSA jack core registers only input devices for each jack
registered. These jack input devices are not readable by userspace devices
that run as non root. This patch series will implement kctls inside the
core jack part, including kctls creating, status changing report, for both
HD-Audio and ASoC jack. This allows non root userspace to read jack status
and act on it.
This patch adds a new API called snd_jack_add_new_kctl(), which will create
a kcontrol, add it to the card, and also attach it to the jack kctl list.
This patch also initialises the jack kctl list after jack is newed, and
reports kctl status when jack insertion/removal events occur.
snd_jack_new() is updated in the following patches to also support creating
phantom jacks and jack kcontrols. We then remove these duplicated features
from HDA jack and have jack kctls handled by core throughout HDA and ASoC.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Modified-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Jie Yang <yang.jie@intel.com>
Reveiwed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When users of SND_DMAENGINE_PCM are built as module, the config symbol
SND_DMAENGINE_PCM must be tristate, otherwise the linker will fail.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
For the PXA DMA rework, we need the generic dmaengine implementation
that currently lives in sound/soc for standalone (non-ASoC) AC'97
support.
Move it to sound/core, and rename the Kconfig symbol.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Currently ALSA supports up to 32 card instances when the dynamic minor
is used. While 32 cards are usually big enough for normal use cases,
there are sometimes weird requirements with more card support.
Actually, this limitation, 32, comes from the index option, where you
can pass the bit mask to assign the card. Other than that, we can
actually give more cards up to the minor number limits (currently 256,
which can be extended more, too).
This patch adds a new Kconfig to specify the max card numbers, and
changes a few places to accept more than 32 cards.
The only incompatibility with high card numbers would be the handling
of index option. The index option can be still used to pass the
bitmask for card assignments, but this works only up to 32 slots.
More than 32, no bitmask style option is available but only a single
slot can be specified via index option.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: virtuoso: Xonar DS: fix polarity of front output
ALSA: Au88x0 - Reduce the number of playback subdevices of au8830 from 32 to 16
ALSA: Au88x0 - Support 4 channels playback when AC97 codecs has SDAC bit
ALSA: HDA: Fix internal microphone on Dell Studio 16 XPS 1645
ALSA: Don't prompt for CONFIG_SND_COMPRESS_OFFLOAD
ALSA: HDA: Use LPIB position fix for Macbook Pro 7,1
CONFIG_SND_COMPRESS_OFFLOAD is an item to be selected by the dirver
just like CONFIG_SND_PCM, and no need to prompt for explicit
selection.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (526 commits)
ASoC: twl6040 - Add method to query optimum PDM_DL1 gain
ALSA: hda - Fix the lost power-setup of seconary pins after PM resume
ALSA: usb-audio: add Yamaha MOX6/MOX8 support
ALSA: virtuoso: add S/PDIF input support for all Xonars
ALSA: ice1724 - Support for ooAoo SQ210a
ALSA: ice1724 - Allow card info based on model only
ALSA: ice1724 - Create capture pcm only for ADC-enabled configurations
ALSA: hdspm - Provide unique driver id based on card serial
ASoC: Dynamically allocate the rtd device for a non-empty release()
ASoC: Fix recursive dependency due to select ATMEL_SSC in SND_ATMEL_SOC_SSC
ALSA: hda - Fix the detection of "Loopback Mixing" control for VIA codecs
ALSA: hda - Return the error from get_wcaps_type() for invalid NIDs
ALSA: hda - Use auto-parser for HP laptops with cx20459 codec
ALSA: asihpi - Fix potential Oops in snd_asihpi_cmode_info()
ALSA: hdsp - Fix potential Oops in snd_hdsp_info_pref_sync_ref()
ALSA: hda/cirrus - support for iMac12,2 model
ASoC: cx20442: add bias control over a platform provided regulator
ALSA: usb-audio - Avoid flood of frame-active debug messages
ALSA: snd-usb-us122l: Delete calls to preempt_disable
mfd: Put WM8994 into cache only mode when suspending
...
Fix up trivial conflicts in:
- arch/arm/mach-s3c64xx/mach-crag6410.c:
renamed speyside_wm8962 to tobermory, added littlemill right
next to it
- drivers/base/regmap/{regcache.c,regmap.c}:
duplicate diff that had already come in with other changes in
the regmap tree
Now move the helper function for creating and reporting the jack-detection
to the common place. The driver that needs this functionality should
select CONFIG_SND_KCTL_JACK kconfig.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is no Kconfig symbol named GCD. The three select statements for
that symbol are nops. Drop these.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Using SG-buffers with dma_alloc_coherent() is often very inefficient
on non-coherent architectures because a tracking record could be
allocated in addition for each dma_alloc_coherent() call.
Instead, simply disable SG-buffers but just allocate normal continuous
buffers on non-supported (currently all but x86) architectures.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of mangling the CONFIG_* variables in the makefiles over and
over, set a few helper variables in Kconfig.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added a note on the dependency of old RTC stuff, which is exclusive
with the new RTC class drivers.
http://bugme.linux-foundation.org/show_bug.cgi?id=11430
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
sound/sound_core.c implements soundcore.ko and contains two parts -
sound_class which is shared by both ALSA and OSS and device
redirection support for OSS. It's always compiled when any sound
support is enabled although it's necessary only when OSS (the actual
one or emulation) is enabled. This is slightly wasteful and as device
redirection always registers character device region for major 14, it
prevents alternative implementation.
This patch introduces a new config SOUND_OSS_CORE which is selected
iff OSS support is actually necessary and build the OSS core part
conditionally.
If OSS is disabled, soundcore merely contains sound_class but leaving
it that way seems to be the simplest approach as otherwise sound_class
should be in ALSA core file if OSS is disabled but should be in
soundcore if OSS is enabled. Also, there's also the user confusion
factor.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Since jack detection requires the input subsystem which may not be
desired on small systems it is not built unless required by a driver
that is being built. Drivers using jack detection should use a pattern
like this:
config SND_FOO
tristate "..."
...
select SND_JACK if INPUT=y || INPUT=SND
to ensure that the jack detection API is enabled if the input subsystem
is. If the input subsystem is not enabled then a stub version of the
API is provided.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Replace CONFIG_SND_DEBUG_DETECT with CONFIG_SND_DEBUG_VERBOSE to
represent its meaning more better. This config isn't provided only
for the detection but for more verbose debug prints in general.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move the codes for virtual master controls to sound core part so that
not only hda-intel drivers can use it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix various typos in kernel docs and Kconfigs, 2.6.21-rc4.
Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
The dynamic minors code is mature, has been tested, and seems to work
fine.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Fixed Oops at rmmod with CONFIG_SND_VERBOSE_PROCFS=n.
Add ifdef to struct fields for optimization and better compile
checks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix misleading help text for SND_SEQUENCER_OSS config option.
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Modules: ALSA Core,PCM Midlevel,ALSA<-OSS emulation,USB generic driver
1) The verbose procfs code for the PCM midlevel and usb audio
can be removed now (more patches will follow).
CONFIG_SND_VERBOSE_PROCFS
2) The PCM OSS plugin system can be also compiled optionaly.
CONFIG_SND_PCM_OSS_PLUGINS
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
