Fixes all whitespace issues reported by checkpatch
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes all issues reported by checkpatch about "unsigned", lets convert
them to unsigned int.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Testing ixp4xx_crypto lead to:
alg: skcipher: ecb(des)-ixp4xx encryption overran dst buffer on test vector 0, cfg="two even aligned splits"
The HW overwrites destination always when sg_nents() > 1.
The problem seems that the HW always write areq->cryptlen bytes on the
last SG.
A comment in driver's code seems to give a clue that multiple SG was not
planned "This was never tested by Intel for more than one dst buffer, I think".
So let's add a fallback for this situation.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Crypto selftests fail on ixp4xx since it do not update IV after skcipher
requests.
Fixes: 81bef01500 ("crypto: ixp4xx - Hardware crypto support for IXP4xx CPUs")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Testing ixp4xx_crypto with CONFIG_DMA_API_DEBUG lead to the following error:
DMA-API: platform ixp4xx_crypto.0: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=24 bytes]
This is due to dma_unmap using the wrong address.
Fixes: 0d44dc59b2 ("crypto: ixp4xx - Fix handling of chained sg buffers")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Qualcomm crypto engine does not handle the following scenarios and
will issue an abort. In such cases, pass on the transformation to
a fallback algorithm.
- DES3 algorithms with all three keys same.
- AES192 algorithms.
- 0 length messages.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove various redundant checks in qce_auth_cfg. Also allow qce_auth_cfg
to take auth_size as a parameter which is a required setting for ccm(aes)
algorithms
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
rf4309 is the specification that uses aes ccm algorithms with IPsec
security packets. Add a submode to identify rfc4309 ccm(aes) algorithm
in the crypto driver.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Qualcomm crypto engine allows for IV registers and status register
to be concatenated to the output. This option is enabled by setting the
RESULTS_DUMP field in GOPROC register. This is useful for most of the
algorithms to either retrieve status of operation or in case of
authentication algorithms to retrieve the mac. But for ccm
algorithms, the mac is part of the output stream and not retrieved
from the IV registers, thus needing a separate buffer to retrieve it.
Make enabling RESULTS_DUMP field optional so that algorithms can choose
whether or not to enable the option.
Note that in this patch, the enabled algorithms always choose
RESULTS_DUMP to be enabled. But later with the introduction of ccm
algorithms, this changes.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
MAC_FAILED gets set in the status register if authenthication fails
for ccm algorithms(during decryption). Add support to catch and flag
this error.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use 'hlist_for_each_entry' instead of hand writing it.
This saves a few lines of code.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Annotate the firmware files CCP might need using MODULE_FIRMWARE().
This will get them included into an initrd when CCP is also included
there. Otherwise the CCP module will not find its firmware when loaded
before the root-fs is mounted.
This can cause problems when the pre-loaded SEV firmware is too old to
support current SEV and SEV-ES virtualization features.
Fixes: e93720606e ("crypto: ccp - Allow SEV firmware to be chosen based on Family and Model")
Cc: stable@vger.kernel.org # v4.20+
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation,
zap under read lock, enable/disably dirty page logging under
read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing
the architecture-specific code
- Some selftests improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCJ13kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM1HAgAqzPxEtiTPTFeFJV5cnPPJ3dFoFDK
y/juZJUQ1AOtvuWzzwuf175ewkv9vfmtG6rVohpNSkUlJYeoc6tw7n8BTTzCVC1b
c/4Dnrjeycr6cskYlzaPyV6MSgjSv5gfyj1LA5UEM16LDyekmaynosVWY5wJhju+
Bnyid8l8Utgz+TLLYogfQJQECCrsU0Wm//n+8TWQgLf1uuiwshU5JJe7b43diJrY
+2DX+8p9yWXCTz62sCeDWNahUv8AbXpMeJ8uqZPYcN1P0gSEUGu8xKmLOFf9kR7b
M4U1Gyz8QQbjd2lqnwiWIkvRLX6gyGVbq2zH0QbhUe5gg3qGUX7JjrhdDQ==
=AXUi
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
Pull crypto updates from Herbert Xu:
"API:
- crypto_destroy_tfm now ignores errors as well as NULL pointers
Algorithms:
- Add explicit curve IDs in ECDH algorithm names
- Add NIST P384 curve parameters
- Add ECDSA
Drivers:
- Add support for Green Sardine in ccp
- Add ecdh/curve25519 to hisilicon/hpre
- Add support for AM64 in sa2ul"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits)
fsverity: relax build time dependency on CRYPTO_SHA256
fscrypt: relax Kconfig dependencies for crypto API algorithms
crypto: camellia - drop duplicate "depends on CRYPTO"
crypto: s5p-sss - consistently use local 'dev' variable in probe()
crypto: s5p-sss - remove unneeded local variable initialization
crypto: s5p-sss - simplify getting of_device_id match data
ccp: ccp - add support for Green Sardine
crypto: ccp - Make ccp_dev_suspend and ccp_dev_resume void functions
crypto: octeontx2 - add support for OcteonTX2 98xx CPT block.
crypto: chelsio/chcr - Remove useless MODULE_VERSION
crypto: ux500/cryp - Remove duplicate argument
crypto: chelsio - remove unused function
crypto: sa2ul - Add support for AM64
crypto: sa2ul - Support for per channel coherency
dt-bindings: crypto: ti,sa2ul: Add new compatible for AM64
crypto: hisilicon - enable new error types for QM
crypto: hisilicon - add new error type for SEC
crypto: hisilicon - support new error types for ZIP
crypto: hisilicon - dynamic configuration 'err_info'
crypto: doc - fix kernel-doc notation in chacha.c and af_alg.c
...
For code readability, the probe() function uses 'dev' variable instead
of '&pdev->dev', so update remaining places.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The initialization of 'err' local variable is not needed as it is
shortly after overwritten.
Addresses-Coverity: Unused value
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use of_device_get_match_data() to make the code slightly smaller.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a new PCI device entry for Green Sardine APU.
Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Tested-by: Babulu Ellune <Babulu.Ellune@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since ccp_dev_suspend() and ccp_dev_resume() only return 0 which causes
ret to equal 0 in sp_suspend and sp_resume, making the if condition
impossible to use. it might be a more appropriate fix to have these be
void functions and eliminate the if condition in sp_suspend() and
sp_resume().
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
OcteonTX2 series of silicons have multiple variants, the
98xx variant has two crypto (CPT0 & CPT1) blocks. This patch
adds support for firmware load on new CPT block(CPT1).
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
kernel version describes module state more accurately.
hence remove chcr versioning.
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix the following coccicheck warning:
./drivers/crypto/ux500/cryp/cryp_p.h:84:6-27:duplicated argument to |
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sa2ul module in am64 have limited support for algorithms, and the
priv and priv_id used on the platform is different compared to AM654 or
j721e.
Use match data to get the SoC specific information and use it throughout
the driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vaibhav Gupta <v_gupta@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On AM64 the DMA channel for sa2ul can be configured to be coherent or
non coherent via DT binding.
Use the dmaengine_get_device_for_dma_api() to get the device pointer which
should be used for with the dma_api to use matching dma_ops for the
channel coherency/non coherency.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vaibhav Gupta <v_gupta@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
QM adds 'qm_mailbox_timeout' and 'qm_flr_timeout' hardware error types on
Kunpeng930. This patch enables the new error types and configures the error
types as NFE.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 SEC adds several new hardware error types. This patch enables
the new error types and configures the error types as NFE.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 ZIP adds 'zip_axi_poison_err' 'zip_sva_err' and
'QM_ACC_DO_TASK_TIMEOUT' hardware error types. This patch enables the error
types and configures the error types as NFE.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'err_info' does not support dynamic configuration since it is const type.
Therefore, in order to support new error type later, 'err_info' is changed
to dynamic configuration.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop the dedicated init_cmd_buf and instead use a local variable. Now
that the low level helper uses an internal buffer for all commands,
using the stack for the upper layers is safe even when running with
CONFIG_VMAP_STACK=y.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210406224952.4177376-8-seanjc@google.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the dedicated status_cmd_buf and instead use a local variable for
PLATFORM_STATUS. Now that the low level helper uses an internal buffer
for all commands, using the stack for the upper layers is safe even when
running with CONFIG_VMAP_STACK=y.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210406224952.4177376-7-seanjc@google.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For commands with small input/output buffers, use the local stack to
"allocate" the structures used to communicate with the PSP. Now that
__sev_do_cmd_locked() gracefully handles vmalloc'd buffers, there's no
reason to avoid using the stack, e.g. CONFIG_VMAP_STACK=y will just work.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210406224952.4177376-6-seanjc@google.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Copy the incoming @data comman to an internal buffer so that callers can
put SEV command buffers on the stack without running afoul of
CONFIG_VMAP_STACK=y, i.e. without bombing on vmalloc'd pointers. As of
today, the largest supported command takes a 68 byte buffer, i.e. pretty
much every command can be put on the stack. Because sev_cmd_mutex is
held for the entirety of a transaction, only a single bounce buffer is
required.
Use the internal buffer unconditionally, as the majority of in-kernel
users will soon switch to using the stack. At that point, checking
virt_addr_valid() becomes (negligible) overhead in most cases, and
supporting both paths slightly increases complexity. Since the commands
are all quite small, the cost of the copies is insignificant compared to
the latency of communicating with the PSP.
Allocate a full page for the buffer as opportunistic preparation for
SEV-SNP, which requires the command buffer to be in firmware state for
commands that trigger memory writes from the PSP firmware. Using a full
page now will allow SEV-SNP support to simply transition the page as
needed.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210406224952.4177376-5-seanjc@google.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN on and reject SEV commands that provide a valid data pointer, but do
not have a known, non-zero length. And conversely, reject commands that
take a command buffer but none is provided (data is null).
Aside from sanity checking input, disallowing a non-null pointer without
a non-zero size will allow a future patch to cleanly handle vmalloc'd
data by copying the data to an internal __pa() friendly buffer.
Note, this also effectively prevents callers from using commands that
have a non-zero length and are not known to the kernel. This is not an
explicit goal, but arguably the side effect is a good thing from the
kernel's perspective.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210406224952.4177376-4-seanjc@google.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly reject using pointers that are not virt_to_phys() friendly
as the source for SEV commands that are sent to the PSP. The PSP works
with physical addresses, and __pa()/virt_to_phys() will not return the
correct address in these cases, e.g. for a vmalloc'd pointer. At best,
the bogus address will cause the command to fail, and at worst lead to
system instability.
While it's unlikely that callers will deliberately use a bad pointer for
SEV buffers, a caller can easily use a vmalloc'd pointer unknowingly when
running with CONFIG_VMAP_STACK=y as it's not obvious that putting the
command buffers on the stack would be bad. The command buffers are
relative small and easily fit on the stack, and the APIs to do not
document that the incoming pointer must be a physically contiguous,
__pa() friendly pointer.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Fixes: 200664d523 ("crypto: ccp: Add Secure Encrypted Virtualization (SEV) command support")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210406224952.4177376-3-seanjc@google.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free the SEV device if later initialization fails. The memory isn't
technically leaked as it's tracked in the top-level device's devres
list, but unless the top-level device is removed, the memory won't be
freed and is effectively leaked.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210406224952.4177376-2-seanjc@google.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After completion of SEND_START, but before SEND_FINISH, the source VMM can
issue the SEND_CANCEL command to stop a migration. This is necessary so
that a cancelled migration can restart with a new target later.
Reviewed-by: Nathan Tempelman <natet@google.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Steve Rutherford <srutherford@google.com>
Message-Id: <20210412194408.2458827-1-srutherford@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'hpre_cfg_by_dsm' has checked and printed error path internally. It is not
necessary to do it here, so remove it.
It should return error immediately when return value of 'hpre_cfg_by_dsm'
is non-zero, and no need to execute the remaining sentences.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the received sqe is abnormal, the error message in the sqe written
back by the hardware is printed to help to analyze the abnormal causes.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The return value of 'le32_to_cpu' is unsigned, so change the
variable type from 'int' to 'unsigned int'.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are two spaces after return, just keep one.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable the detection of hangs by setting watchdog timers (WDTs) on
generations that supports that feature.
The default timeout value comes from HW specs. WTDs are reset each time
an accelerator wins arbitration and is able to send/read a command to/from
an accelerator.
The value has added significant margin to make sure there are no spurious
timeouts. The scope of watchdog is per QAT device.
If a timeout is detected, the firmware resets the accelerator and
returns a response descriptor with an appropriate error code.
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The buffer of the hardware sge needs to be initialized by
soft sgl.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This seems "32" and "31" is obfuscating, It might be better to add a comment,
which explain it.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
