mirror of
https://github.com/torvalds/linux.git
synced 2024-09-20 23:13:00 +00:00
3822a7c409
1164810 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Masami Hiramatsu (Google)
|
96cd93af79 |
selftests/ftrace: Fix probepoint testcase to ignore __pfx_* symbols
Fix kprobe probepoint testcase to ignore __pfx_* prefix symbols. Those are introduced by commit |
||
|
Masami Hiramatsu (Google)
|
a457e944df |
selftests/ftrace: Fix eprobe syntax test case to check filter support
Fix eprobe syntax test case to check whether the kernel supports the filter
on eprobe for filter syntax test command. Without this fix, this test case
will fail if the kernel supports eprobe but doesn't support the filter on
eprobe.
Link: https://lore.kernel.org/all/167309834742.640500.379128668288448035.stgit@devnote3/
Fixes:
|
||
|
Masami Hiramatsu (Google)
|
133921530c |
tracing/eprobe: Fix to add filter on eprobe description in README file
Fix to add a description of the filter on eprobe in README file. This
is required to identify the kernel supports the filter on eprobe or not.
Link: https://lore.kernel.org/all/167309833728.640500.12232259238201433587.stgit@devnote3/
Fixes:
|
||
Yang Jihong
|
f1c97a1b4e |
x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe range
When arch_prepare_optimized_kprobe calculating jump destination address,
it copies original instructions from jmp-optimized kprobe (see
__recover_optprobed_insn), and calculated based on length of original
instruction.
arch_check_optimized_kprobe does not check KPROBE_FLAG_OPTIMATED when
checking whether jmp-optimized kprobe exists.
As a result, setup_detour_execution may jump to a range that has been
overwritten by jump destination address, resulting in an inval opcode error.
For example, assume that register two kprobes whose addresses are
<func+9> and <func+11> in "func" function.
The original code of "func" function is as follows:
0xffffffff816cb5e9 <+9>: push %r12
0xffffffff816cb5eb <+11>: xor %r12d,%r12d
0xffffffff816cb5ee <+14>: test %rdi,%rdi
0xffffffff816cb5f1 <+17>: setne %r12b
0xffffffff816cb5f5 <+21>: push %rbp
1.Register the kprobe for <func+11>, assume that is kp1, corresponding optimized_kprobe is op1.
After the optimization, "func" code changes to:
0xffffffff816cc079 <+9>: push %r12
0xffffffff816cc07b <+11>: jmp 0xffffffffa0210000
0xffffffff816cc080 <+16>: incl 0xf(%rcx)
0xffffffff816cc083 <+19>: xchg %eax,%ebp
0xffffffff816cc084 <+20>: (bad)
0xffffffff816cc085 <+21>: push %rbp
Now op1->flags == KPROBE_FLAG_OPTIMATED;
2. Register the kprobe for <func+9>, assume that is kp2, corresponding optimized_kprobe is op2.
register_kprobe(kp2)
register_aggr_kprobe
alloc_aggr_kprobe
__prepare_optimized_kprobe
arch_prepare_optimized_kprobe
__recover_optprobed_insn // copy original bytes from kp1->optinsn.copied_insn,
// jump address = <func+14>
3. disable kp1:
disable_kprobe(kp1)
__disable_kprobe
...
if (p == orig_p || aggr_kprobe_disabled(orig_p)) {
ret = disarm_kprobe(orig_p, true) // add op1 in unoptimizing_list, not unoptimized
orig_p->flags |= KPROBE_FLAG_DISABLED; // op1->flags == KPROBE_FLAG_OPTIMATED | KPROBE_FLAG_DISABLED
...
4. unregister kp2
__unregister_kprobe_top
...
if (!kprobe_disabled(ap) && !kprobes_all_disarmed) {
optimize_kprobe(op)
...
if (arch_check_optimized_kprobe(op) < 0) // because op1 has KPROBE_FLAG_DISABLED, here not return
return;
p->kp.flags |= KPROBE_FLAG_OPTIMIZED; // now op2 has KPROBE_FLAG_OPTIMIZED
}
"func" code now is:
0xffffffff816cc079 <+9>: int3
0xffffffff816cc07a <+10>: push %rsp
0xffffffff816cc07b <+11>: jmp 0xffffffffa0210000
0xffffffff816cc080 <+16>: incl 0xf(%rcx)
0xffffffff816cc083 <+19>: xchg %eax,%ebp
0xffffffff816cc084 <+20>: (bad)
0xffffffff816cc085 <+21>: push %rbp
5. if call "func", int3 handler call setup_detour_execution:
if (p->flags & KPROBE_FLAG_OPTIMIZED) {
...
regs->ip = (unsigned long)op->optinsn.insn + TMPL_END_IDX;
...
}
The code for the destination address is
0xffffffffa021072c: push %r12
0xffffffffa021072e: xor %r12d,%r12d
0xffffffffa0210731: jmp 0xffffffff816cb5ee <func+14>
However, <func+14> is not a valid start instruction address. As a result, an error occurs.
Link: https://lore.kernel.org/all/20230216034247.32348-3-yangjihong1@huawei.com/
Fixes:
|
||
|
Yang Jihong
|
868a6fc0ca |
x86/kprobes: Fix __recover_optprobed_insn check optimizing logic
Since the following commit: commit |
||
|
Masami Hiramatsu (Google)
|
4fbd2f83fd |
kprobes: Fix to handle forcibly unoptimized kprobes on freeing_list
Since forcibly unoptimized kprobes will be put on the freeing_list directly
in the unoptimize_kprobe(), do_unoptimize_kprobes() must continue to check
the freeing_list even if unoptimizing_list is empty.
This bug can happen if a kprobe is put in an instruction which is in the
middle of the jump-replaced instruction sequence of an optprobe, *and* the
optprobe is recently unregistered and queued on unoptimizing_list.
In this case, the optprobe will be unoptimized forcibly (means immediately)
and put it into the freeing_list, expecting the optprobe will be handled in
do_unoptimize_kprobe().
But if there is no other optprobes on the unoptimizing_list, current code
returns from the do_unoptimize_kprobe() soon and does not handle the
optprobe which is on the freeing_list. Then the optprobe will hit the
WARN_ON_ONCE() in the do_free_cleaned_kprobes(), because it is not handled
in the latter loop of the do_unoptimize_kprobe().
To solve this issue, do not return from do_unoptimize_kprobes() immediately
even if unoptimizing_list is empty.
Moreover, this change affects another case. kill_optimized_kprobes() expects
kprobe_optimizer() will just free the optprobe on freeing_list.
So I changed it to just do list_move() to freeing_list if optprobes are on
unoptimizing list. And the do_unoptimize_kprobe() will skip
arch_disarm_kprobe() if the probe on freeing_list has gone flag.
Link: https://lore.kernel.org/all/Y8URdIfVr3pq2X8w@xpf.sh.intel.com/
Link: https://lore.kernel.org/all/167448024501.3253718.13037333683110512967.stgit@devnote3/
Fixes:
|
||
Dave Airlie
|
ef04277600 |
Short summary of fixes pull:
Contains fixes for DP MST and the panel orientation on an Lenovo IdeaPad model. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmPuB6cACgkQaA3BHVML eiNrgwf+Of4L65lpUbMtqfXygfIvy++rzMJuB06+ccmXA3j/QLiAftLVEEtwJpfm 9nn3Fmu0tBE9i3ULkiVUDOizP76EjNXewWSfPl730NJ1+Y6/h0/ljdCeQDNLxts7 QkZkm7FgIldP2rNN4P84VMz60A6m8B8C60N64+ucFdNtd7+67jhLdwHpP1/gwkKS idwMGcfVfV37PnSUCdXvfYUWpKZZ1xiUkR+0twjWR//8pEEekSRBsiF3l/gyJqK0 u80myF4ph+yvfdLuerFFqHdVtSVzSiCcziuiIMdn5t5d03MxVlD6C/pCfExbwBmi D0VthHzn215rRdOlaApLL9FlzbvnhA== =g76M -----END PGP SIGNATURE----- Merge tag 'drm-misc-next-fixes-2023-02-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next Short summary of fixes pull: Contains fixes for DP MST and the panel orientation on an Lenovo IdeaPad model. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/Y+4H4C4E6cZcM9+J@linux-uq9g |
||
Linus Torvalds
|
c72e04c26f |
ARM: defconfigs for 6.3
As usual, this branch contains all the patches to enable options for newly added device drivers in the 32-bit and 64-bit defconfig files. I have sorted the files according to the changes to Kconfig files, to make it easier to check what has changed compared to the 'make savedefconfig' output. The most notable change this time is a series from Mark Brown to add a 'virtconfig' target for arm64, which is for the moment the same as the 'defconfig' target but disables all the top-level SoC specific options in order to have a smaller and faster kernel build. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPtOE0ACgkQmmx57+YA GNk0DQ/+N1/Ga/kGtD8UOHrAOO3IPyGJJjQduYBp8e2mNbBy7uq4kOzXdir6va13 4i0N1+5gGt+OC4hbDry4405k8X064nnz5dpgKPWlfIZpMlM/r93xPVKTHRh2rBJI r18PH0I6QRvM4tGDBhbOXxs/T3jzYXTL0Vk4Y7RYO4Gqx0CL5QgQGIXyPkHTCk/y WCl9Ycbb4KAjTsA3lcmsZ+horkKK1uiJuI1KeIiWwKMeHc8rMTJRdSedprURCPaP SyQ4IHMMf3aST4PE8FLLnjD63F0suwUl/K4JRNktOcHcP+29T8cIqOgo7Tq8WLRk WHemO2dQl7stA6K03RPEabXFR7QN8VNVobLiWAfAAY0jf73pXC/OGxHilzWKJwPS Dd8SH2T2BW6p0Iuv95cYarfBXm2yp5Cp7WVmZhwX2/vPGjB9qJhvORiHoObYPIdo JS3FxPvlV6xKOkZwcTTrwJlooO735xNNFl9AyzUXOvmraVFTA+njZ9S7fGq0h/30 Z4UONXkaOSxAe4AfcD7vMDk9ezKFM7rDsPeT27tU3Ti1pLU+AAAkUlyEeWqwerxz miThF1LI5p5SWhSL32LjjBTfBPZ5DXZPni77Mbigq27OK/osuW3CJMenU5qD33+8 tmyzbX5CrkrwL0kfXpB9fCLiQKNmuO5VokbaapewwZykrdvX4H4= =48oI -----END PGP SIGNATURE----- Merge tag 'soc-defconfig-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM defconfigs updates from Arnd Bergmann: "As usual, this contains all the patches to enable options for newly added device drivers in the 32-bit and 64-bit defconfig files. I have sorted the files according to the changes to Kconfig files, to make it easier to check what has changed compared to the 'make savedefconfig' output. The most notable change this time is a series from Mark Brown to add a 'virtconfig' target for arm64, which is for the moment the same as the 'defconfig' target but disables all the top-level SoC specific options in order to have a smaller and faster kernel build" * tag 'soc-defconfig-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (39 commits) arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform arm64: defconfig: Enable DisplayPort on SC8280XP laptops arm64: configs: Add virtconfig kbuild: Provide a version of merge_into_defconfig without override warnings scripts: merge_config: Add option to suppress warning on overrides ARM: reorder defconfig files arm64: reorder defconfig arm64: defconfig: enable Qualcomm SDAM nvmem driver arm64: defconfig: enable SM8450 DISPCC clock driver ARM: defconfig: Add IOSCHED_BFQ to the default configs ARM: configs: multi_v7: enable NVMEM driver for STM32 ARM: Add wpcm450_defconfig for Nuvoton WPCM450 arm64: defconfig: Enable DMA_RESTRICTED_POOL arm64: defconfig: Enable missing configs for mt8192-asurada riscv: defconfig: Enable the Allwinner D1 platform and drivers ARM: imx_v6_v7_defconfig: Don't enable PROVE_LOCKING ARM: multi_v7_defconfig: Add GXP Fan and SPI support ARM: add multi_v7_lpae_defconfig kbuild: Add config fragment merge functionality ARM: multi_v7_defconfig: Add options to support TQMLS102xA series ... |
||
|
Linus Torvalds
|
b32c6e029c |
ARM: SoC updates for 6.3
The majority of the changes are for the OMAP2 platform, mostly removing some dead code that got left behind from previous cleanups. Aside from that, there are very minor updates and correctness fixes for Zynq, i.MX, Samsung, Broadcom, AT91, ep93xx, and OMAP1. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPtUJwACgkQmmx57+YA GNkkqhAAqKN4MyRJgMesZD0SbXrmPCJC7FwLAfr47GdhhanR0sEjLeqtjug4mi1C E24ivgegIpVuywOtzMUgGrX37J+mNNrHz5oxF4GORlPPIn4zHwYgaOdftllxkFis K1Jk/bZp8PyAJcWDzPJ0Cy29uNypO8lUmZgcyAPBH66O2nSi94IMvjzmEz+uwaI/ QdQyCo4xY88SW0Zht48PmqwLDTNmJ/mC8IwI4Km92SEn2qO/gn9D1dVKY2sVAFZh LaU2v0znYDlQ6rrdkBby3cBj25Q9KzOr62wQ18/AAwDcHuLtVf2aXa94pByB5vDl JH2fFQf/eCt/5IXfFrB+iOXGleX2LA0FlMwMuZzvwV0obJPkhia3ismLds1c39uO dcaC3mU5D7VSEuq+q4eSL87aCHxIH/BO9m9DJycNG6n+Bk46eWKne2gMIBfbunf3 gwtJlrWl7FzpJdvc/xbdbILlUaBvSUsZorRcVraQbK554zOVTJRXmQpz4Nz8nfSP olNmeqNg8jRK9rDHWUYJxPgp4kJ/bHXIdacinVYkkXZwqmd26yDNkUSkmBGvUDvP UghiV1R4snjHRG9syxZexyHO9Tz/7zNxOwXGcl5Z8KNg6b9xi8kKLRkd4oIAHSjs /x5OBPkwSdauzqFJV71qns3HnEazAksUe7fxc1DPCPNI1kpfQtY= =4Xcx -----END PGP SIGNATURE----- Merge tag 'arm-soc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC updates from Arnd Bergmann: "The majority of the changes are for the OMAP2 platform, mostly removing some dead code that got left behind from previous cleanups. Aside from that, there are very minor updates and correctness fixes for Zynq, i.MX, Samsung, Broadcom, AT91, ep93xx, and OMAP1" * tag 'arm-soc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits) dt-bindings: soc: samsung: exynos-pmu: allow phys as child ARM: imx: mach-imx6ul: add imx6ulz support ARM: imx: Call ida_simple_remove() for ida_simple_get arm64: drop redundant "ARMv8" from Kconfig option title ARM: ep93xx: Convert to use descriptors for GPIO LEDs ARM: s3c: fix s3c64xx_set_timer_source prototype ARM: OMAP2+: Fix spelling typos in comment ARM: OMAP2+: Remove unneeded #include <linux/pinctrl/machine.h> ARM: OMAP2+: Remove unneeded #include <linux/pinctrl/pinmux.h> ARM: OMAP1: call platform_device_put() in error case in omap1_dm_timer_init() ARM: BCM63xx: remove useless goto statement ARM: omap2: make functions static ARM: omap2: remove unused omap2_pm_init ARM: omap2: remove unused declarations ARM: omap2: remove unused functions ARM: omap2: smartreflex: remove on_init control ARM: omap2: remove APLL control ARM: omap2: simplify clock2xxx header ARM: omap2: remove unused omap_hwmod_reset.c ARM: omap2: remove unused headers ... |
||
|
Linus Torvalds
|
ff0c7e1862 |
ARM: unused boardfile removal for 6.3
This is a follow-up to the deprecation of most of the old-style board files that was merged in linux-6.0, removing them for good. This branch is almost exclusively dead code removal based on those annotations. Some device driver removals went through separate subsystem trees, but the majority is in the same branch, in order to better handle dependencies between the patches and avoid breaking bisection. Unfortunately that leads to merge conflicts against other changes in the subsystem trees, but they should all be trivial to resolve by removing the files. See commit |
||
David Howells
|
16541195c6 |
cifs: Add a function to read into an iter from a socket
Add a helper function to read data from a socket into the given iterator. Signed-off-by: David Howells <dhowells@redhat.com> cc: Steve French <sfrench@samba.org> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org Link: https://lore.kernel.org/r/164928617874.457102.10021662143234315566.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165211419563.3154751.18431990381145195050.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165348879662.2106726.16881134187242702351.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165364826398.3334034.12541600783145647319.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/166126395495.708021.12328677373159554478.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/166697258876.61150.3530237818849429372.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/166732031039.3186319.10691316510079412635.stgit@warthog.procyon.org.uk/ # rfc Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
David Howells
|
b8713c4dbf |
cifs: Add some helper functions
Add some helper functions to manipulate the folio marks by iterating through a list of folios held in an xarray rather than using a page list. Signed-off-by: David Howells <dhowells@redhat.com> cc: Steve French <sfrench@samba.org> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org Link: https://lore.kernel.org/r/164928616583.457102.15157033997163988344.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165211418840.3154751.3090684430628501879.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165348878940.2106726.204291614267188735.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165364825674.3334034.3356201708659748648.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/166126394799.708021.10637797063862600488.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/166697258147.61150.9940790486999562110.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/166732030314.3186319.9209944805565413627.stgit@warthog.procyon.org.uk/ # rfc Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
David Howells
|
39bc58203f |
cifs: Add a function to Hash the contents of an iterator
Add a function to push the contents of a BVEC-, KVEC- or XARRAY-type iterator into a synchronous hash algorithm. UBUF- and IOBUF-type iterators are not supported on the assumption that either we're doing buffered I/O, in which case we won't see them, or we're doing direct I/O, in which case the iterator will have been extracted into a BVEC-type iterator higher up. Signed-off-by: David Howells <dhowells@redhat.com> cc: Steve French <sfrench@samba.org> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org cc: linux-crypto@vger.kernel.org Link: https://lore.kernel.org/r/166697257423.61150.12070648579830206483.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/166732029577.3186319.17162612653237909961.stgit@warthog.procyon.org.uk/ # rfc Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
David Howells
|
e5fbdde430 |
cifs: Add a function to build an RDMA SGE list from an iterator
Add a function to add elements onto an RDMA SGE list representing page fragments extracted from a BVEC-, KVEC- or XARRAY-type iterator and DMA mapped until the maximum number of elements is reached. Nothing is done to make sure the pages remain present - that must be done by the caller. Signed-off-by: David Howells <dhowells@redhat.com> cc: Steve French <sfrench@samba.org> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Tom Talpey <tom@talpey.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org cc: linux-rdma@vger.kernel.org Link: https://lore.kernel.org/r/166697256704.61150.17388516338310645808.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/166732028840.3186319.8512284239779728860.stgit@warthog.procyon.org.uk/ # rfc Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
David Howells
|
0185846975 |
netfs: Add a function to extract an iterator into a scatterlist
Provide a function for filling in a scatterlist from the list of pages contained in an iterator. If the iterator is UBUF- or IOBUF-type, the pages have a pin taken on them (as FOLL_PIN). If the iterator is BVEC-, KVEC- or XARRAY-type, no pin is taken on the pages and it is left to the caller to manage their lifetime. It cannot be assumed that a ref can be validly taken, particularly in the case of a KVEC iterator. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: Steve French <sfrench@samba.org> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: linux-cachefs@redhat.com cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
David Howells
|
85dd2c8ff3 |
netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator
Add a function to extract the pages from a user-space supplied iterator
(UBUF- or IOVEC-type) into a BVEC-type iterator, retaining the pages by
getting a pin on them (as FOLL_PIN) as we go.
This is useful in three situations:
(1) A userspace thread may have a sibling that unmaps or remaps the
process's VM during the operation, changing the assignment of the
pages and potentially causing an error. Retaining the pages keeps
some pages around, even if this occurs; futher, we find out at the
point of extraction if EFAULT is going to be incurred.
(2) Pages might get swapped out/discarded if not retained, so we want to
retain them to avoid the reload causing a deadlock due to a DIO
from/to an mmapped region on the same file.
(3) The iterator may get passed to sendmsg() by the filesystem. If a
fault occurs, we may get a short write to a TCP stream that's then
tricky to recover from.
We don't deal with other types of iterator here, leaving it to other
mechanisms to retain the pages (eg. PG_locked, PG_writeback and the pipe
lock).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: linux-cachefs@redhat.com
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
||
|
David Howells
|
4e260a8fd7 |
cifs: Implement splice_read to pass down ITER_BVEC not ITER_PIPE
Provide cifs_splice_read() to use a bvec rather than an pipe iterator as
the latter cannot so easily be split and advanced, which is necessary to
pass an iterator down to the bottom levels. Upstream cifs gets around this
problem by using iov_iter_get_pages() to prefill the pipe and then passing
the list of pages down.
This is done by:
(1) Bulk-allocate a bunch of pages to carry as much of the requested
amount of data as possible, but without overrunning the available
slots in the pipe and add them to an ITER_BVEC.
(2) Synchronously call ->read_iter() to read into the buffer.
(3) Discard any unused pages.
(4) Load the remaining pages into the pipe in order and advance the head
pointer.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: linux-cifs@vger.kernel.org
Link: https://lore.kernel.org/r/166732028113.3186319.1793644937097301358.stgit@warthog.procyon.org.uk/ # rfc
Signed-off-by: Steve French <stfrench@microsoft.com>
|
||
|
David Howells
|
7c8e01ebf2 |
splice: Export filemap/direct_splice_read()
filemap_splice_read() and direct_splice_read() should be exported. Signed-off-by: David Howells <dhowells@redhat.com> cc: Steve French <sfrench@samba.org> cc: Jens Axboe <axboe@kernel.dk> cc: Christoph Hellwig <hch@lst.de> cc: Al Viro <viro@zeniv.linux.org.uk> cc: David Hildenbrand <david@redhat.com> cc: John Hubbard <jhubbard@nvidia.com> cc: linux-cifs@vger.kernel.org cc: linux-mm@kvack.org cc: linux-block@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
David Howells
|
7d58fe7310 |
iov_iter: Add a function to extract a page list from an iterator
Add a function, iov_iter_extract_pages(), to extract a list of pages from
an iterator. The pages may be returned with a pin added or nothing,
depending on the type of iterator.
Add a second function, iov_iter_extract_will_pin(), to determine how the
cleanup should be done.
There are two cases:
(1) ITER_IOVEC or ITER_UBUF iterator.
Extracted pages will have pins (FOLL_PIN) obtained on them so that a
concurrent fork() will forcibly copy the page so that DMA is done
to/from the parent's buffer and is unavailable to/unaffected by the
child process.
iov_iter_extract_will_pin() will return true for this case. The
caller should use something like unpin_user_page() to dispose of the
page.
(2) Any other sort of iterator.
No refs or pins are obtained on the page, the assumption is made that
the caller will manage page retention.
iov_iter_extract_will_pin() will return false. The pages don't need
additional disposal.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: John Hubbard <jhubbard@nvidia.com>
cc: David Hildenbrand <david@redhat.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
||
|
David Howells
|
f62e52d127 |
iov_iter: Define flags to qualify page extraction.
Define flags to qualify page extraction to pass into iov_iter_*_pages*() rather than passing in FOLL_* flags. For now only a flag to allow peer-to-peer DMA is supported. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> cc: Al Viro <viro@zeniv.linux.org.uk> cc: Logan Gunthorpe <logang@deltatee.com> cc: linux-fsdevel@vger.kernel.org cc: linux-block@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
David Howells
|
33b3b04154 |
splice: Add a func to do a splice from an O_DIRECT file without ITER_PIPE
Implement a function, direct_file_splice(), that deals with this by using an ITER_BVEC iterator instead of an ITER_PIPE iterator as the former won't free its buffers when reverted. The function bulk allocates all the buffers it thinks it is going to use in advance, does the read synchronously and only then trims the buffer down. The pages we did use get pushed into the pipe. This fixes a problem with the upcoming iov_iter_extract_pages() function, whereby pages extracted from a non-user-backed iterator such as ITER_PIPE aren't pinned. __iomap_dio_rw(), however, calls iov_iter_revert() to shorten the iterator to just the bufferage it is going to use - which has the side-effect of freeing the excess pipe buffers, even though they're attached to a bio and may get written to by DMA (thanks to Hillf Danton for spotting this[1]). This then causes memory corruption that is particularly noticeable when the syzbot test[2] is run. The test boils down to: out = creat(argv[1], 0666); ftruncate(out, 0x800); lseek(out, 0x200, SEEK_SET); in = open(argv[1], O_RDONLY | O_DIRECT | O_NOFOLLOW); sendfile(out, in, NULL, 0x1dd00); run repeatedly in parallel. What I think is happening is that ftruncate() occasionally shortens the DIO read that's about to be made by sendfile's splice core by reducing i_size. This should be more efficient for DIO read by virtue of doing a bulk page allocation, but slightly less efficient by ignoring any partial page in the pipe. Reported-by: syzbot+a440341a59e3b7142895@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> cc: Christoph Hellwig <hch@lst.de> cc: Al Viro <viro@zeniv.linux.org.uk> cc: David Hildenbrand <david@redhat.com> cc: John Hubbard <jhubbard@nvidia.com> cc: linux-mm@kvack.org cc: linux-block@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20230207094731.1390-1-hdanton@sina.com/ [1] Link: https://lore.kernel.org/r/000000000000b0b3c005f3a09383@google.com/ [2] Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
David Howells
|
07073eb01c |
splice: Add a func to do a splice from a buffered file without ITER_PIPE
Provide a function to do splice read from a buffered file, pulling the folios out of the pagecache directly by calling filemap_get_pages() to do any required reading and then pasting the returned folios into the pipe. A helper function is provided to do the actual folio pasting and will handle multipage folios by splicing as many of the relevant subpages as will fit into the pipe. The code is loosely based on filemap_read() and might belong in mm/filemap.c with that as it needs to use filemap_get_pages(). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> cc: Christoph Hellwig <hch@lst.de> cc: Al Viro <viro@zeniv.linux.org.uk> cc: David Hildenbrand <david@redhat.com> cc: John Hubbard <jhubbard@nvidia.com> cc: linux-mm@kvack.org cc: linux-block@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
David Howells
|
dd5b9d003e |
mm: Pass info, not iter, into filemap_get_pages()
filemap_get_pages() and a number of functions that it calls take an iterator to provide two things: the number of bytes to be got from the file specified and whether partially uptodate pages are allowed. Change these functions so that this information is passed in directly. This allows it to be called without having an iterator to hand. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jens Axboe <axboe@kernel.dk> cc: Christoph Hellwig <hch@lst.de> cc: Matthew Wilcox <willy@infradead.org> cc: Al Viro <viro@zeniv.linux.org.uk> cc: David Hildenbrand <david@redhat.com> cc: John Hubbard <jhubbard@nvidia.com> cc: linux-mm@kvack.org cc: linux-block@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> |
||
Kees Cook
|
eb3e28c1e8 |
smb3: Replace smb2pdu 1-element arrays with flex-arrays
The kernel is globally removing the ambiguous 0-length and 1-element
arrays in favor of flexible arrays, so that we can gain both compile-time
and run-time array bounds checking[1].
Replace the trailing 1-element array with a flexible array in the
following structures:
struct smb2_err_rsp
struct smb2_tree_connect_req
struct smb2_negotiate_rsp
struct smb2_sess_setup_req
struct smb2_sess_setup_rsp
struct smb2_read_req
struct smb2_read_rsp
struct smb2_write_req
struct smb2_write_rsp
struct smb2_query_directory_req
struct smb2_query_directory_rsp
struct smb2_set_info_req
struct smb2_change_notify_rsp
struct smb2_create_rsp
struct smb2_query_info_req
struct smb2_query_info_rsp
Replace the trailing 1-element array with a flexible array, but leave
the existing structure padding:
struct smb2_file_all_info
struct smb2_lock_req
Adjust all related size calculations to match the changes to sizeof().
No machine code output or .data section differences are produced after
these changes.
[1] For lots of details, see both:
https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays
https://people.kernel.org/kees/bounded-flexible-arrays-in-c
Cc: Steve French <sfrench@samba.org>
Cc: Paulo Alcantara <pc@cjr.nz>
Cc: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
||
Paulo Alcantara
|
0e9bd27b2a |
cifs: get rid of dns resolve worker
We already upcall to resolve hostnames during reconnect by calling reconn_set_ipaddr_from_hostname(), so there is no point in having a worker to periodically call it. Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Reviewed-by <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Linus Torvalds
|
5b0ed59649 |
for-6.3/block-2023-02-16
-----BEGIN PGP SIGNATURE-----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=poRc
-----END PGP SIGNATURE-----
Merge tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Christoph:
- Small improvements to the logging functionality (Amit Engel)
- Authentication cleanups (Hannes Reinecke)
- Cleanup and optimize the DMA mapping cod in the PCIe driver
(Keith Busch)
- Work around the command effects for Format NVM (Keith Busch)
- Misc cleanups (Keith Busch, Christoph Hellwig)
- Fix and cleanup freeing single sgl (Keith Busch)
- MD updates via Song:
- Fix a rare crash during the takeover process
- Don't update recovery_cp when curr_resync is ACTIVE
- Free writes_pending in md_stop
- Change active_io to percpu
- Updates to drbd, inching us closer to unifying the out-of-tree driver
with the in-tree one (Andreas, Christoph, Lars, Robert)
- BFQ update adding support for multi-actuator drives (Paolo, Federico,
Davide)
- Make brd compliant with REQ_NOWAIT (me)
- Fix for IOPOLL and queue entering, fixing stalled IO waiting on
timeouts (me)
- Fix for REQ_NOWAIT with multiple bios (me)
- Fix memory leak in blktrace cleanup (Greg)
- Clean up sbitmap and fix a potential hang (Kemeng)
- Clean up some bits in BFQ, and fix a bug in the request injection
(Kemeng)
- Clean up the request allocation and issue code, and fix some bugs
related to that (Kemeng)
- ublk updates and fixes:
- Add support for unprivileged ublk (Ming)
- Improve device deletion handling (Ming)
- Misc (Liu, Ziyang)
- s390 dasd fixes (Alexander, Qiheng)
- Improve utility of request caching and fixes (Anuj, Xiao)
- zoned cleanups (Pankaj)
- More constification for kobjs (Thomas)
- blk-iocost cleanups (Yu)
- Remove bio splitting from drivers that don't need it (Christoph)
- Switch blk-cgroups to use struct gendisk. Some of this is now
incomplete as select late reverts were done. (Christoph)
- Add bvec initialization helpers, and convert callers to use that
rather than open-coding it (Christoph)
- Misc fixes and cleanups (Jinke, Keith, Arnd, Bart, Li, Martin,
Matthew, Ulf, Zhong)
* tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux: (169 commits)
brd: use radix_tree_maybe_preload instead of radix_tree_preload
block: use proper return value from bio_failfast()
block: bio-integrity: Copy flags when bio_integrity_payload is cloned
block: Fix io statistics for cgroup in throttle path
brd: mark as nowait compatible
brd: check for REQ_NOWAIT and set correct page allocation mask
brd: return 0/-error from brd_insert_page()
block: sync mixed merged request's failfast with 1st bio's
Revert "blk-cgroup: pin the gendisk in struct blkcg_gq"
Revert "blk-cgroup: pass a gendisk to blkg_lookup"
Revert "blk-cgroup: delay blk-cgroup initialization until add_disk"
Revert "blk-cgroup: delay calling blkcg_exit_disk until disk_release"
Revert "blk-cgroup: move the cgroup information to struct gendisk"
nvme-pci: remove iod use_sgls
nvme-pci: fix freeing single sgl
block: ublk: check IO buffer based on flag need_get_data
s390/dasd: Fix potential memleak in dasd_eckd_init()
s390/dasd: sort out physical vs virtual pointers usage
block: Remove the ALLOC_CACHE_SLACK constant
block: make kobj_type structures constant
...
|
||
|
Linus Torvalds
|
553637f73c |
for-6.3/dio-2023-02-16
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmPueAQQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgplopEACo17a4Z2p2xCedA0NCqX2ggtsSIdYiluPm pgdBzIEsgwKo1XVLGRgGiC8VdMRuzO4Zh/NGn4iRF1a68wjgjnwGWY7r052TUoSr q1yya739BpffnkXjj15x86cwl+5rHv2RQkm15+2HqBgcruA63/ZgdKBtjj+EtVKs zYOlmgyfFbkn8AdULMGiDKP4lixV8gUelv6vWneBwNrj4iSLnuN1+8nJNsl4wxwg ImSpx63AzhUoeL6byc+fmiA8fZhDhSvwON2tCyyCmOjlFM/TLrsm5t1juWiDid1O UROkQwQtsmjSUq3ow5fRJfjbZ3HLa1uGQr95DYHy0OBRAteAhDY5Upv0DXNL0ZBh uNNg8AXtJbyc+pLHWnncyiTzi+3eWs7WiMn04/a5eDhFvcJ0PZjLIgRi5j1ezUS1 bWqoPaAIxoMD83WoMxjnKvBpGeMzPHvNTijeZjkGOu0vOk8JhXqNmLTjNG9aLtzf 1Nvp0o8AqtQAW7cgFazZSWtw4bPk/wZ7mW0zHtqLDHIzXkc7A/Uo0ftdv84G08aW pvakNz4aNLwSPf7hxgPP9SgS9CeHhxK8PS6uk3V788SI8qGiew11+EcTNGkQNmvw /ItCo93UaWD/7SZLObTLslmet7rFHzz6PXaXrMxrSvaeZMkgr7DWEy9XS+ueOtXO fS8QhJX11w== =IU45 -----END PGP SIGNATURE----- Merge tag 'for-6.3/dio-2023-02-16' of git://git.kernel.dk/linux Pull legacy dio update from Jens Axboe: "We only have a few file systems that use the old dio code, make them select it rather than build it unconditionally" * tag 'for-6.3/dio-2023-02-16' of git://git.kernel.dk/linux: fs: build the legacy direct I/O code conditionally fs: move sb_init_dio_done_wq out of direct-io.c |
||
|
Linus Torvalds
|
c1ef500307 |
for-6.3/iter-ubuf-2023-02-16
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmPueOUQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpkEWD/9hOagNSeXfCd1eAJ44E5IemgHKqfU0RXRs kdW1o35eBXwPVAyhhDmcz60hkijm47Pw3IJUdSNaGqdm9uYpLwiatuYY5EOVC4qg BFkVPGCA8ERXStFM/mnWj0gkYDmb/8bzk9bdBU1FQvQOIQgYpomlHdMVfQJ+0tDT 7VTffRaWfcxWd1u+NBMDxmfz47teplxiHJDg38wGlgT6G1kMdEUK+y6hd0SoASPM ocMW8LL2v3wLQhQAOWYd6sw2kFnxx4VOzhSepPAY0U78CR6CYm6zthRd+k+Ro/nt RFKL6Ijt2LRaOZqY3HRnCpUwmhBNft0ZFH4OHh21vPaukB4sjWbQ5SJniucNcoCN rb9jAJDJdS6oy+Uimeig99aQ/yGSLJXG8MQKrC36NdGSwydUfaCLaoLKwfC8zYDC Zr3G7tfOhSJQzQtNSH1H0SqHFvMfc7C2Ra8mYXdHbcREswKOTT73aJUHq5RFfwO+ m10V5rQgCB9rJz0NLbo68GhxDrbTQuueDj+yDWCSoulUdNg3s2BZ3/iBjODJyJNO P3aG4bMYxC5te2JWCBnmR6du//8vnvDHnwWh9yKcUk+l/9OTtAPouAdUCv+r1wkz Ib0aEX3SiJ65LIePQO2kbdvgnweyFCJYduvMW9zjsH9GMgRP0eA6EKZh3mbKhOw4 yw9BcZoNYQ== =+ImB -----END PGP SIGNATURE----- Merge tag 'for-6.3/iter-ubuf-2023-02-16' of git://git.kernel.dk/linux Pull io_uring ITER_UBUF conversion from Jens Axboe: "Since we now have ITER_UBUF available, switch to using it for single ranges as it's more efficient than ITER_IOVEC for that" * tag 'for-6.3/iter-ubuf-2023-02-16' of git://git.kernel.dk/linux: block: use iter_ubuf for single range iov_iter: move iter_ubuf check inside restore WARN io_uring: use iter_ubuf for single range imports io_uring: switch network send/recv to ITER_UBUF iov: add import_ubuf() |
||
|
Linus Torvalds
|
cce5fe5eda |
for-6.3/io_uring-2023-02-16
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmPueWMQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgprngEADFtiQ+B3+PQxo6Y32H7JJloqG7e6HtyysO i7mZm3kbnpklFqqjqgswlTeBxwmQnJxfTaY9pl89AGMps2VmW50GpwnDR7VJb4nF VdWHgQ9n3+P/C+p1zcH0T+8ftP5GnmgckEWKisxIxaNNCGuenGhYmFo2qC7CyCl9 pzcukYrbjauytR59aCtV+bVZ/9tjpQw7QylUJ0oEk+BZ8md5O+DBUfkZbA65qj1X G9Jyb5fybLkyiWU2oXJ7XjSqEYND7I5io0yg9CtGsYzHCgrZcteX0L2Jux5CYvLd 6QIEgPWF1235Z9L0Zy7RcT6rvuCTVTdGVTjAFgT67WpeTaLNLn4ZC4Pm0MGGsx1i QhLsMxJhyFCcsMrii1FtIKPrxvS9hI/5HYymhUqU4wksno4Fpfg3nW2/HUGuNJBa 35AUwX4OhGvSfXPDJDuRjjNlzCFu5dWJoWwi0CRv6zrPcrqPQ5WZHGqURjzJYNaJ zz32PbQVObrs3nxj7UTa9g5eInqtXGnrd//f9BcMgnykgvXpBrtFq/l1oB0oDR/r m1HKiZBlcUqHZ+DqgbhXmRJCtbwuxt25WPMPxSqSzizZVuaKszyYreOOMfhxJFNd SH8kzJ83O4mBeCKozt6WwroHDFq5QRn9ILa/m40CUzci731Wdh3RBt7JXN+Yuc3S i/1kegdeNA== =dX7U -----END PGP SIGNATURE----- Merge tag 'for-6.3/io_uring-2023-02-16' of git://git.kernel.dk/linux Pull io_uring updates from Jens Axboe: - Cleanup series making the async prep and handling of REQ_F_FORCE_ASYNC easier to follow and verify (Dylan) - Enable specifying specific flags for OP_MSG_RING (Breno) - Enable use of KASAN with the internal request cache (Breno) - Split the opcode definition structs into a hot and cold part (Breno) - OP_MSG_RING fixes (Pavel, me) - Fix an issue with IOPOLL cancelation and PREEMPT_NONE (me) - Handle TIF_NOTIFY_RESUME for the io-wq threads that never return to userspace (me) - Add support for using io_uring_register() with a registered ring fd (Josh) - Improve handling of poll on the ring fd (Pavel) - Series improving the task_work handling (Pavel) - Misc cleanups, fixes, improvements (Dmitrii, Quanfa, Richard, Pavel, me) * tag 'for-6.3/io_uring-2023-02-16' of git://git.kernel.dk/linux: (51 commits) io_uring: Support calling io_uring_register with a registered ring fd io_uring,audit: don't log IORING_OP_MADVISE io_uring: mark task TASK_RUNNING before handling resume/task work io_uring: always go async for unsupported open flags io_uring: always go async for unsupported fadvise flags io_uring: for requests that require async, force it io_uring: if a linked request has REQ_F_FORCE_ASYNC then run it async io_uring: add reschedule point to handle_tw_list() io_uring: add a conditional reschedule to the IOPOLL cancelation loop io_uring: return normal tw run linking optimisation io_uring: refactor tctx_task_work io_uring: refactor io_put_task helpers io_uring: refactor req allocation io_uring: improve io_get_sqe io_uring: kill outdated comment about overflow flush io_uring: use user visible tail in io_uring_poll() io_uring: pass in io_issue_def to io_assign_file() io_uring: Enable KASAN for request cache io_uring: handle TIF_NOTIFY_RESUME when checking for task_work io_uring/msg-ring: ensure flags passing works for task_work completions ... |
||
|
Linus Torvalds
|
eca3a04f14 |
dlm for 6.3
This patch set fixes some races in the lowcomms startup and shutdown code that were found by targetted stress testing that quickly and repeatedly joins and leaves lockspaces. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJj870xAAoJEDgbc8f8gGmqGasP/2fy7GIe/NNaTDVfRPzJMVsh v5GP42q7pwuaR2rTZxHOpALfDJXx3wu9zsA3A6luSaYRRHxdntztaVT2vaAFa13o KI2IDB2DIdJ1PqDVgq8E9I6+X/y5gFpeq9Wyo2FdYATncQ370wN42uIk3EECPTZh 73HZHBkACQJ28ljt4zWg9ANn1rSiZQjaKayFwbnaH0AjbWrTehccyKR0BE2rNd6c EqoRX0tRJLH1RVaOHKW+m4EZaMDo2m5hQH/lhcwth/uqxOqQYOSyMPneKVj/TsI8 8ToXRCqOYwV3uNZVhgRxu3hHPd2e0l3OgU+mlvNqURTSANr8/D3kEZp90AWDV2yg yGtaSYspKY7tjgdIWZbTffxXu+5CZs0xTSkw53xjWyCZ4++c/MO4WO3w8/QIsmWd Ow8l29YQc5t7XI0zjpsgyQMaKHQLXE06y9F1jZlZpxa0PfvDOevhl+8YQrKGIJYh B+QzjtkmQLpD9RyBRdmxIrS5dl/Wv+wa4zhstD9jkUAkKvZ5ndYvCVtjRu5F8PZ7 HJzUorZFqDgKfXqTLt91irtS4OdMY4xPWr/V1K8NekTQ/+GY7Q1Qu1MlBOW2aqIk UHfn1VaxdFom+tdFF83WG+kmnUu2+YZK83vtnFoZlTsbvfY//zveR1Hbt4MnTj6G Z00nx5eb2SaKJFHD0J8z =4Def -----END PGP SIGNATURE----- Merge tag 'dlm-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm updates from David Teigland: "This fixes some races in the lowcomms startup and shutdown code that were found by targeted stress testing that quickly and repeatedly joins and leaves lockspaces" * tag 'dlm-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: fs: dlm: remove unnecessary waker_up() calls fs: dlm: move state change into else branch fs: dlm: remove newline in log_print fs: dlm: reduce the shutdown timeout to 5 secs fs: dlm: make dlm sequence id more robust fs: dlm: wait until all midcomms nodes detect version fs: dlm: ignore unexpected non dlm opts msgs fs: dlm: bring back previous shutdown handling fs: dlm: send FIN ack back in right cases fs: dlm: move sending fin message into state change handling fs: dlm: don't set stop rx flag after node reset fs: dlm: fix race setting stop tx flag fs: dlm: be sure to call dlm_send_queue_flush() fs: dlm: fix use after free in midcomms commit fs: dlm: start midcomms before scand fs/dlm: Remove "select SRCU" fs: dlm: fix return value check in dlm_memory_init() |
||
|
Linus Torvalds
|
885ce48739 |
for-6.3-tag
-----BEGIN PGP SIGNATURE-----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=NCpw
-----END PGP SIGNATURE-----
Merge tag 'for-6.3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"The usual mix of performance improvements and new features.
The core change is reworking how checksums are processed, with
followup cleanups and simplifications. There are two minor changes in
block layer and iomap code.
Features:
- block group allocation class heuristics:
- pack files by size (up to 128k, up to 8M, more) to avoid
fragmentation in block groups, assuming that file size and life
time is correlated, in particular this may help during balance
- with tracepoints and extensible in the future
Performance:
- send: cache directory utimes and only emit the command when
necessary
- speedup up to 10x
- smaller final stream produced (no redundant utimes commands
issued)
- compatibility not affected
- fiemap: skip backref checks for shared leaves
- speedup 3x on sample filesystem with all leaves shared (e.g. on
snapshots)
- micro optimized b-tree key lookup, speedup in metadata operations
(sample benchmark: fs_mark +10% of files/sec)
Core changes:
- change where checksumming is done in the io path:
- checksum and read repair does verification at lower layer
- cascaded cleanups and simplifications
- raid56 refactoring and cleanups
Fixes:
- sysfs: make sure that a run-time change of a feature is correctly
tracked by the feature files
- scrub: better reporting of tree block errors
Other:
- locally enable -Wmaybe-uninitialized after fixing all warnings
- misc cleanups, spelling fixes
Other code:
- block: export bio_split_rw
- iomap: remove IOMAP_F_ZONE_APPEND"
* tag 'for-6.3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (109 commits)
btrfs: make kobj_type structures constant
btrfs: remove the bdev argument to btrfs_rmap_block
btrfs: don't rely on unchanging ->bi_bdev for zone append remaps
btrfs: never return true for reads in btrfs_use_zone_append
btrfs: pass a btrfs_bio to btrfs_use_append
btrfs: set bbio->file_offset in alloc_new_bio
btrfs: use file_offset to limit bios size in calc_bio_boundaries
btrfs: do unsigned integer division in the extent buffer binary search loop
btrfs: eliminate extra call when doing binary search on extent buffer
btrfs: raid56: handle endio in scrub_rbio
btrfs: raid56: handle endio in recover_rbio
btrfs: raid56: handle endio in rmw_rbio
btrfs: raid56: submit the read bios from scrub_assemble_read_bios
btrfs: raid56: fold rmw_read_wait_recover into rmw_read_bios
btrfs: raid56: fold recover_assemble_read_bios into recover_rbio
btrfs: raid56: add a bio_list_put helper
btrfs: raid56: wait for I/O completion in submit_read_bios
btrfs: raid56: simplify code flow in rmw_rbio
btrfs: raid56: simplify error handling and code flow in raid56_parity_write
btrfs: replace btrfs_wait_tree_block_writeback by wait_on_extent_buffer_writeback
...
|
||
Andrew Morton
|
f9366f4c2a |
include/linux/migrate.h: remove unneeded externs
As suggested by Matthew. Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
SeongJae Park
|
32cf666eab |
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
Return value mechanism of do_migrate_range() is not very simple, while no caller of the function checks the return value. Make the function return nothing to be more simple, and cleanup related unnecessary code. Link: https://lkml.kernel.org/r/20230216170703.64574-1-sj@kernel.org Suggested-by: David Hildenbrand <david@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Peter Xu
|
7a079ba200 |
mm/uffd: fix comment in handling pte markers
The comment is obsolete after
|
||
Baolin Wang
|
cd7755800e |
mm: change to return bool for isolate_movable_page()
Now the isolate_movable_page() can only return 0 or -EBUSY, and no users will care about the negative return value, thus we can convert the isolate_movable_page() to return a boolean value to make the code more clear when checking the movable page isolation state. No functional changes intended. [akpm@linux-foundation.org: remove unneeded comment, per Matthew] Link: https://lkml.kernel.org/r/cb877f73f4fff8d309611082ec740a7065b1ade0.1676424378.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Baolin Wang
|
9747b9e924 |
mm: hugetlb: change to return bool for isolate_hugetlb()
Now the isolate_hugetlb() only returns 0 or -EBUSY, and most users did not care about the negative value, thus we can convert the isolate_hugetlb() to return a boolean value to make code more clear when checking the hugetlb isolation state. Moreover converts 2 users which will consider the negative value returned by isolate_hugetlb(). No functional changes intended. [akpm@linux-foundation.org: shorten locked section, per SeongJae Park] Link: https://lkml.kernel.org/r/12a287c5bebc13df304387087bbecc6421510849.1676424378.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Baolin Wang
|
f7f9c00dfa |
mm: change to return bool for isolate_lru_page()
The isolate_lru_page() can only return 0 or -EBUSY, and most users did not care about the negative error of isolate_lru_page(), except one user in add_page_for_migration(). So we can convert the isolate_lru_page() to return a boolean value, which can help to make the code more clear when checking the return value of isolate_lru_page(). Also convert all users' logic of checking the isolation state. No functional changes intended. Link: https://lkml.kernel.org/r/3074c1ab628d9dbf139b33f248a8bc253a3f95f0.1676424378.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Baolin Wang
|
be2d575638 |
mm: change to return bool for folio_isolate_lru()
Patch series "Change the return value for page isolation functions", v3.
Now the page isolation functions did not return a boolean to indicate
success or not, instead it will return a negative error when failed
to isolate a page. So below code used in most places seem a boolean
success/failure thing, which can confuse people whether the isolation
is successful.
if (folio_isolate_lru(folio))
continue;
Moreover the page isolation functions only return 0 or -EBUSY, and
most users did not care about the negative error except for few users,
thus we can convert all page isolation functions to return a boolean
value, which can remove the confusion to make code more clear.
No functional changes intended in this patch series.
This patch (of 4):
Now the folio_isolate_lru() did not return a boolean value to indicate
isolation success or not, however below code checking the return value can
make people think that it was a boolean success/failure thing, which makes
people easy to make mistakes (see the fix patch[1]).
if (folio_isolate_lru(folio))
continue;
Thus it's better to check the negative error value expilictly returned by
folio_isolate_lru(), which makes code more clear per Linus's
suggestion[2]. Moreover Matthew suggested we can convert the isolation
functions to return a boolean[3], since most users did not care about the
negative error value, and can also remove the confusing of checking return
value.
So this patch converts the folio_isolate_lru() to return a boolean value,
which means return 'true' to indicate the folio isolation is successful,
and 'false' means a failure to isolation. Meanwhile changing all users'
logic of checking the isolation state.
No functional changes intended.
[1] https://lore.kernel.org/all/20230131063206.28820-1-Kuan-Ying.Lee@mediatek.com/T/#u
[2] https://lore.kernel.org/all/CAHk-=wiBrY+O-4=2mrbVyxR+hOqfdJ=Do6xoucfJ9_5az01L4Q@mail.gmail.com/
[3] https://lore.kernel.org/all/Y+sTFqwMNAjDvxw3@casper.infradead.org/
Link: https://lkml.kernel.org/r/cover.1676424378.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/8a4e3679ed4196168efadf7ea36c038f2f7d5aa9.1676424378.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
Arnd Bergmann
|
d5d4692472 |
objtool: add UACCESS exceptions for __tsan_volatile_read/write
A lot of the tsan helpers are already excempt from the UACCESS warnings,
but some more functions were added that need the same thing:
kernel/kcsan/core.o: warning: objtool: __tsan_volatile_read16+0x0: call to __tsan_unaligned_read16() with UACCESS enabled
kernel/kcsan/core.o: warning: objtool: __tsan_volatile_write16+0x0: call to __tsan_unaligned_write16() with UACCESS enabled
vmlinux.o: warning: objtool: __tsan_unaligned_volatile_read16+0x4: call to __tsan_unaligned_read16() with UACCESS enabled
vmlinux.o: warning: objtool: __tsan_unaligned_volatile_write16+0x4: call to __tsan_unaligned_write16() with UACCESS enabled
As Marco points out, these functions don't even call each other
explicitly but instead gcc (but not clang) notices the functions
being identical and turns one symbol into a direct branch to the
other.
Link: https://lkml.kernel.org/r/20230215130058.3836177-4-arnd@kernel.org
Fixes:
|
||
|
Arnd Bergmann
|
e75a698859 |
kmsan: disable ftrace in kmsan core code
objtool warns about some suspicous code inside of kmsan:
vmlinux.o: warning: objtool: __msan_metadata_ptr_for_load_n+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_metadata_ptr_for_store_n+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_metadata_ptr_for_load_1+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_metadata_ptr_for_store_1+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_metadata_ptr_for_load_2+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_metadata_ptr_for_store_2+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_metadata_ptr_for_load_4+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_metadata_ptr_for_store_4+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_metadata_ptr_for_load_8+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_metadata_ptr_for_store_8+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_instrument_asm_store+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_chain_origin+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_poison_alloca+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_warning+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_get_context_state+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: kmsan_copy_to_user+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: kmsan_unpoison_memory+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: kmsan_unpoison_entry_regs+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: kmsan_report+0x4: call to __fentry__() with UACCESS enabled
The Makefile contained a line to turn off ftrace for the entire directory,
but this does not work. Replace it with individual lines, matching the
approach in kasan.
Link: https://lkml.kernel.org/r/20230215130058.3836177-3-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes:
|
||
|
Arnd Bergmann
|
9701c9ff83 |
kasan: mark addr_has_metadata __always_inline
Patch series "objtool warning fixes", v2. These are three of the easier fixes for objtool warnings around kasan/kmsan/kcsan. I dropped one patch since Peter had come up with a better fix, and adjusted the changelog text based on feedback. This patch (of 3): When the compiler decides not to inline this function, objtool complains about incorrect UACCESS state: mm/kasan/generic.o: warning: objtool: __asan_load2+0x11: call to addr_has_metadata() with UACCESS enabled Link: https://lore.kernel.org/all/20230208164011.2287122-1-arnd@kernel.org/ Link: https://lkml.kernel.org/r/20230215130058.3836177-2-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
274978f173 |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmPvZWkACgkQnJ2qBz9k QNkVtQf/V515KIb7lEkwOjlF7AQg5MS/c8zuodHISzWYhZyd0KSTb+qnF/QzLvVm cJ3cIPXrIyVw4Eeqh0qQvukOYCcBvUa1IBW5kePiy3mHiHRD2PRgaxSGBXTXqqPG xXagwllrn3/mG4ZKXlNYFrzgoshSFFeBdkLGEi+/L6DAe0B+mG+FIHON1eWylgOT j1D+/k9RNvRhRU8WtStcI4u9mnVPqUI2RSWUpjxuNzUPtyFflPVNCz+bkXXovPQ0 ZQY2HeZcs7jsorCmeSHUzTt5bbj3BfhO3uWL4/wnHgp+88OBRUUyvMrNbOF97xd6 KFqbJVQbSevasUSEvCS+3+EChzjGoA== =DaJi -----END PGP SIGNATURE----- Merge tag 'fixes_for_v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull UDF and ext2 fixes from Jan Kara: - Rewrite of udf directory iteration code to address multiple syzbot reports - Fixes to udf extent handling and block mapping code to address several syzbot reports and filesystem corruption issues uncovered by fsx & fsstress - Convert udf to kmap_local() - Add sanity checks when loading udf bitmaps - Drop old VARCONV support which I've never seen used and which was broken for quite some years without anybody noticing - Finish conversion of ext2 to kmap_local() - One fix to mpage_writepages() on which other udf fixes depend * tag 'fixes_for_v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (78 commits) udf: Avoid directory type conversion failure due to ENOMEM udf: Use unsigned variables for size calculations udf: remove reporting loc in debug output udf: Check consistency of Space Bitmap Descriptor udf: Fix file counting in LVID udf: Limit file size to 4TB udf: Don't return bh from udf_expand_dir_adinicb() udf: Convert udf_expand_file_adinicb() to avoid kmap_atomic() udf: Convert udf_adinicb_writepage() to memcpy_to_page() udf: Switch udf_adinicb_readpage() to kmap_local_page() udf: Move udf_adinicb_readpage() to inode.c udf: Mark aops implementation static udf: Switch to single address_space_operations udf: Add handling of in-ICB files to udf_bmap() udf: Convert all file types to use udf_write_end() udf: Convert in-ICB files to use udf_write_begin() udf: Convert in-ICB files to use udf_direct_IO() udf: Convert in-ICB files to use udf_writepages() udf: Unify .read_folio for normal and in-ICB files udf: Fix off-by-one error when discarding preallocation ... |
||
|
Linus Torvalds
|
cd776a4342 |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmPvZJwACgkQnJ2qBz9k QNlPcAf/UL7DDv37vnvfcFTa9lRyC0dXsgxnVZUwMU0hJs/ewbmueYGnJSBRTVLG 7ad7bKYQVWsjhas4YulofgRrFWxVDcR32qbC+pDo/X6vGjo4tDl2CNPYREY3n3kN xR6Ca7nPxBH5AVYwwOqBJSTqhWGy1TSDeuskndS0P+YtTv6Y4Zvm4UEiNAXJ4nwo 5Nd+bsPpkrEgQqO/NK2rCXfBfkJr4jAMcp+Nn2zAP44icZAXJYn8QrN3gVL6OZlN RKq36MGQf52lxyufVyFCulWKRbxhEKUS0nURZgAG+Sv87DlSuBJgRVG7xJ1baPpK 2g7wG2jaT7YMfA4PWms/rwAj/CkGLA== =NRh0 -----END PGP SIGNATURE----- Merge tag 'fsnotify_for_v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify updates from Jan Kara: "Support for auditing decisions regarding fanotify permission events" * tag 'fsnotify_for_v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fanotify,audit: Allow audit to use the full permission event response fanotify: define struct members to hold response decision context fanotify: Ensure consistent variable type for response |
||
|
Linus Torvalds
|
6639c3ce7f |
fsverity updates for 6.3
Fix the longstanding implementation limitation that fsverity was only supported when the Merkle tree block size, filesystem block size, and PAGE_SIZE were all equal. Specifically, add support for Merkle tree block sizes less than PAGE_SIZE, and make ext4 support fsverity on filesystems where the filesystem block size is less than PAGE_SIZE. Effectively, this means that fsverity can now be used on systems with non-4K pages, at least on ext4. These changes have been tested using the verity group of xfstests, newly updated to cover the new code paths. Also update fs/verity/ to support verifying data from large folios. There's also a similar patch for fs/crypto/, to support decrypting data from large folios, which I'm including in this pull request to avoid a merge conflict between the fscrypt and fsverity branches. There will be a merge conflict in fs/buffer.c with some of the foliation work in the mm tree. Please use the merge resolution from linux-next. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCY/KJtRQcZWJpZ2dlcnNA Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK/A/AP0RUlCClBRuHwXPRG0we8R1L153ga4s Vl+xRpCr+SswXwEAiOEpYN5cXoVKzNgxbEXo2pQzxi5lrpjZgUI6CL3DuQs= =ZRFX -----END PGP SIGNATURE----- Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux Pull fsverity updates from Eric Biggers: "Fix the longstanding implementation limitation that fsverity was only supported when the Merkle tree block size, filesystem block size, and PAGE_SIZE were all equal. Specifically, add support for Merkle tree block sizes less than PAGE_SIZE, and make ext4 support fsverity on filesystems where the filesystem block size is less than PAGE_SIZE. Effectively, this means that fsverity can now be used on systems with non-4K pages, at least on ext4. These changes have been tested using the verity group of xfstests, newly updated to cover the new code paths. Also update fs/verity/ to support verifying data from large folios. There's also a similar patch for fs/crypto/, to support decrypting data from large folios, which I'm including in here to avoid a merge conflict between the fscrypt and fsverity branches" * tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux: fscrypt: support decrypting data from large folios fsverity: support verifying data from large folios fsverity.rst: update git repo URL for fsverity-utils ext4: allow verity with fs block size < PAGE_SIZE fs/buffer.c: support fsverity in block_read_full_folio() f2fs: simplify f2fs_readpage_limit() ext4: simplify ext4_readpage_limit() fsverity: support enabling with tree block size < PAGE_SIZE fsverity: support verification with tree block size < PAGE_SIZE fsverity: replace fsverity_hash_page() with fsverity_hash_block() fsverity: use EFBIG for file too large to enable verity fsverity: store log2(digest_size) precomputed fsverity: simplify Merkle tree readahead size calculation fsverity: use unsigned long for level_start fsverity: remove debug messages and CONFIG_FS_VERITY_DEBUG fsverity: pass pos and size to ->write_merkle_tree_block fsverity: optimize fsverity_cleanup_inode() on non-verity files fsverity: optimize fsverity_prepare_setattr() on non-verity files fsverity: optimize fsverity_file_open() on non-verity files |
||
|
Linus Torvalds
|
f18f9845f2 |
fscrypt updates for 6.3
Simplify the implementation of the test_dummy_encryption mount option by adding the "test dummy key" on-demand. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCY/J7NRQcZWJpZ2dlcnNA Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK3UVAP9Likiuy47D/RM4mOsPMwLAlQRx5uW6 iGxT6DutekA7DwEA4hNjEQQ/EKO+UxFb+fBCX+xpTDbS3LB7CxGsqHzZJQM= =SiNJ -----END PGP SIGNATURE----- Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux Pull fscrypt updates from Eric Biggers: "Simplify the implementation of the test_dummy_encryption mount option by adding the 'test dummy key' on-demand" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux: fscrypt: clean up fscrypt_add_test_dummy_key() fs/super.c: stop calling fscrypt_destroy_keyring() from __put_super() f2fs: stop calling fscrypt_add_test_dummy_key() ext4: stop calling fscrypt_add_test_dummy_key() fscrypt: add the test dummy encryption key on-demand |
||
|
Linus Torvalds
|
dc483c851f |
Changes since last update:
- Add per-cpu kthreads for low-latency decompression for Android
use cases;
- Get rid of tagged pointer helpers since they are rarely used now;
- Several code cleanups to reduce codebase;
- Documentation and MAINTAINERS updates.
-----BEGIN PGP SIGNATURE-----
iIcEABYIAC8WIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCY/IDjhEceGlhbmdAa2Vy
bmVsLm9yZwAKCRA5NzHcH7XmBNbTAQDT2njll/B2JSYbVC2I2HYTZSyFXEaHhH+M
6gHRbEhTWAD/VNiAcdE600IkUwut/78tDvwlz/XJSd2JQMMwkTSviwc=
=oroQ
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"The most noticeable feature for this cycle is per-CPU kthread
decompression since Android use cases need low-latency I/O handling in
order to ensure the app runtime performance, currently unbounded
workqueue latencies are not quite good for production on many aarch64
hardwares and thus we need to introduce a deterministic expectation
for these. Decompression is CPU-intensive and it is sleepable for
EROFS, so other alternatives like decompression under softirq contexts
are not considered. More details are in the corresponding commit
message.
Others are random cleanups around the whole codebase and we will
continue to clean up further in the next few months.
Due to Lunar New Year holidays, some other new features were not
completely reviewed and solidified as expected and we may delay them
into the next version.
Summary:
- Add per-cpu kthreads for low-latency decompression for Android use
cases
- Get rid of tagged pointer helpers since they are rarely used now
- Several code cleanups to reduce codebase
- Documentation and MAINTAINERS updates"
* tag 'erofs-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: (21 commits)
erofs: fix an error code in z_erofs_init_zip_subsystem()
erofs: unify anonymous inodes for blob
erofs: relinquish volume with mutex held
erofs: maintain cookies of share domain in self-contained list
erofs: remove unused device mapping in meta routine
MAINTAINERS: erofs: Add Documentation/ABI/testing/sysfs-fs-erofs
Documentation/ABI: sysfs-fs-erofs: update supported features
erofs: remove unused EROFS_GET_BLOCKS_RAW flag
erofs: update print symbols for various flags in trace
erofs: make kobj_type structures constant
erofs: add per-cpu threads for decompression as an option
erofs: tidy up internal.h
erofs: get rid of z_erofs_do_map_blocks() forward declaration
erofs: move zdata.h into zdata.c
erofs: remove tagged pointer helpers
erofs: avoid tagged pointers to mark sync decompression
erofs: get rid of erofs_inode_datablocks()
erofs: simplify iloc()
erofs: get rid of debug_one_dentry()
erofs: remove linux/buffer_head.h dependency
...
|
||
|
Linus Torvalds
|
91bc559d8d |
fs.acl.v6.3
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY+5NzQAKCRCRxhvAZXjc otv2AP9wJtg+RL01iYiUE2mRMYxq4R79yWrtPEyuDEZIq5tQSwEA/H4yk7EHgHMS aKnEfny/P9JjKPtZzsxhMQcpiIVewQs= =+Q0C -----END PGP SIGNATURE----- Merge tag 'fs.acl.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping Pull vfs acl update from Christian Brauner: "This contains a single update to the internal get acl method and replaces an open-coded cmpxchg() comparison with with try_cmpxchg(). It's clearer and also beneficial on some architectures" * tag 'fs.acl.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: posix_acl: Use try_cmpxchg in get_acl |
||
|
Linus Torvalds
|
ea5aac6fae |
fs.v6.3
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY+5SogAKCRCRxhvAZXjc
orVwAP4jJ1dPZYx1xHip9TfB5fv5xHz3euhvWns6qGJdVYoHzwEAhVxgYUpqWdXX
L/+VKRFFujYxsSXP4BbS3xDPUJeQFAI=
=ccK2
-----END PGP SIGNATURE-----
Merge tag 'fs.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs hardening update from Christian Brauner:
"Jan pointed out that during shutdown both filp_close() and super block
destruction will use basic printk logging when bugs are detected. This
causes issues in a few scenarios:
- Tools like syzkaller cannot figure out that the logged message
indicates a bug.
- Users that explicitly opt in to have the kernel bug on data
corruption by selecting CONFIG_BUG_ON_DATA_CORRUPTION should see
the kernel crash when they did actually select that option.
- When there are busy inodes after the superblock is shut down later
access to such a busy inodes walks through freed memory. It would
be better to cleanly crash instead.
All of this can be addressed by using the already existing
CHECK_DATA_CORRUPTION() macro in these places when kernel bugs are
detected. Its logging improvement is useful for all users.
Otherwise this only has a meaningful behavioral effect when users do
select CONFIG_BUG_ON_DATA_CORRUPTION which means this is backward
compatible for regular users"
* tag 'fs.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
fs: Use CHECK_DATA_CORRUPTION() when kernel bugs are detected
|
||
|
Linus Torvalds
|
05e6295f7b |
fs.idmapped.v6.3
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY+5NlQAKCRCRxhvAZXjc
orOaAP9i2h3OJy95nO2Fpde0Bt2UT+oulKCCcGlvXJ8/+TQpyQD/ZQq47gFQ0EAz
Br5NxeyGeecAb0lHpFz+CpLGsxMrMwQ=
=+BG5
-----END PGP SIGNATURE-----
Merge tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs idmapping updates from Christian Brauner:
- Last cycle we introduced the dedicated struct mnt_idmap type for
mount idmapping and the required infrastucture in
|
||
Yury Norov
|
01bb11ad82 |
sched/topology: fix KASAN warning in hop_cmp()
Despite that prev_hop is used conditionally on cur_hop
is not the first hop, it's initialized unconditionally.
Because initialization implies dereferencing, it might happen
that the code dereferences uninitialized memory, which has been
spotted by KASAN. Fix it by reorganizing hop_cmp() logic.
Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Fixes:
|