* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Fix sched rt group scheduling when hierachy is enabled
Although they run as rpciod background tasks, under normal operation
(i.e. no SIGKILL), functions like nfs_sillyrename(), nfs4_proc_unlck()
and nfs4_do_close() want to be fully synchronous. This means that when we
exit, we want all references to the rpc_task to be gone, and we want
any dentry references etc. held by that task to be released.
For this reason these functions call __rpc_wait_for_completion_task(),
followed by rpc_put_task() in the expectation that the latter will be
releasing the last reference to the rpc_task, and thus ensuring that the
callback_ops->rpc_release() has been called synchronously.
This patch fixes a race which exists due to the fact that
rpciod calls rpc_complete_task() (in order to wake up the callers of
__rpc_wait_for_completion_task()) and then subsequently calls
rpc_put_task() without ensuring that these two steps are done atomically.
In order to avoid adding new spin locks, the patch uses the existing
waitqueue spin lock to order the rpc_task reference count releases between
the waiting process and rpciod.
The common case where nobody is waiting for completion is optimised for by
checking if the RPC_TASK_ASYNC flag is cleared and/or if the rpc_task
reference count is 1: in those cases we drop trying to grab the spin lock,
and immediately free up the rpc_task.
Those few processes that need to put the rpc_task from inside an
asynchronous context and that do not care about ordering are given a new
helper: rpc_put_task_async().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Reviving a cleanup I had done about a year ago as part of a larger
futex_set_wait proposal. Over the years, the locking of the hashed
futex queue got improved, so that some of the "rare but normal" race
conditions described in comments can't actually happen anymore.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Darren Hart <dvhltc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110307020750.GA31188@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If the kernel command line declares a tracer "ftrace=sometracer" and
that tracer is either not defined or is enabled after irqsoff,
then the irqs off selftest will fail with the following error:
Testing tracer irqsoff:
------------[ cut here ]------------
WARNING: at /home/rostedt/work/autotest/nobackup/linux-test.git/kernel/trace/tra
ce.c:713 update_max_tr_single+0xfa/0x11b()
Hardware name:
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.38-rc8-test #1
Call Trace:
[<c0441d9d>] ? warn_slowpath_common+0x65/0x7a
[<c049adb2>] ? update_max_tr_single+0xfa/0x11b
[<c0441dc1>] ? warn_slowpath_null+0xf/0x13
[<c049adb2>] ? update_max_tr_single+0xfa/0x11b
[<c049e454>] ? stop_critical_timing+0x154/0x204
[<c049b54b>] ? trace_selftest_startup_irqsoff+0x5b/0xc1
[<c049b54b>] ? trace_selftest_startup_irqsoff+0x5b/0xc1
[<c049b54b>] ? trace_selftest_startup_irqsoff+0x5b/0xc1
[<c049e529>] ? time_hardirqs_on+0x25/0x28
[<c0468bca>] ? trace_hardirqs_on_caller+0x18/0x12f
[<c0468cec>] ? trace_hardirqs_on+0xb/0xd
[<c049b54b>] ? trace_selftest_startup_irqsoff+0x5b/0xc1
[<c049b6b8>] ? register_tracer+0xf8/0x1a3
[<c14e93fe>] ? init_irqsoff_tracer+0xd/0x11
[<c040115e>] ? do_one_initcall+0x71/0x121
[<c14e93f1>] ? init_irqsoff_tracer+0x0/0x11
[<c14ce3a9>] ? kernel_init+0x13a/0x1b6
[<c14ce26f>] ? kernel_init+0x0/0x1b6
[<c0403842>] ? kernel_thread_helper+0x6/0x10
---[ end trace e93713a9d40cd06c ]---
.. no entries found ..FAILED!
What happens is the "ftrace=..." will expand the ring buffer to its
default size (from its minimum size) but it will not expand the
max ring buffer (the ring buffer to store maximum latencies).
When the irqsoff test runs, it will call the ring buffer swap routine
that checks if the max ring buffer is the same size as the normal
ring buffer, and will fail if it is not. This causes the test to fail.
The solution is to expand the max ring buffer before running the self
test if the max ring buffer is used by that tracer and the normal ring
buffer is expanded. The max ring buffer should be shrunk again after
the test is done to save space.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Trace events belonging to a module only exists when the module is
loaded. Well, we can use trace_set_clr_event funtion to enable some
trace event at the module init routine, so that we will not miss
something while loading then module.
So, Export the trace_set_clr_event function so that module can use it.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
LKML-Reference: <1289196312-25323-1-git-send-email-yuanhan.liu@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The "Delta way too big" warning might appear on a system with a
unstable shed clock right after the system is resumed and tracing
was enabled at time of suspend.
Since it's not realy a bug, and the unstable sched clock is working
fast and reliable otherwise, Steven suggested to keep using the
sched clock in any case and just to make note in the warning itself.
v2 changes:
- added #ifdef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <20110218145219.GD2604@jolsa.brq.redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Formatting change only to improve code readability. No code changes except to
introduce intermediate variables.
Signed-off-by: David Sharp <dhsharp@google.com>
LKML-Reference: <1291421609-14665-13-git-send-email-dhsharp@google.com>
[ Keep variable declarations and assignment separate ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: David Sharp <dhsharp@google.com>
LKML-Reference: <1291421609-14665-6-git-send-email-dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The lock_depth field in the event headers was added as a temporary
data point for help in removing the BKL. Now that the BKL is pretty
much been removed, we can remove this field.
This in turn changes the header from 12 bytes to 8 bytes,
removing the 4 byte buffer that gcc would insert if the first field
in the data load was 8 bytes in size.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the plugging now being explicitly controlled by the
submitter, callers need not pass down unplugging hints
to the block layer. If they want to unplug, it's because they
manually plugged on their own - in which case, they should just
unplug at will.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This patch adds support for creating a queuing context outside
of the queue itself. This enables us to batch up pieces of IO
before grabbing the block device queue lock and submitting them to
the IO scheduler.
The context is created on the stack of the process and assigned in
the task structure, so that we can auto-unplug it if we hit a schedule
event.
The current queue plugging happens implicitly if IO is submitted to
an empty device, yet callers have to remember to unplug that IO when
they are going to wait for it. This is an ugly API and has caused bugs
in the past. Additionally, it requires hacks in the vm (->sync_page()
callback) to handle that logic. By switching to an explicit plugging
scheme we make the API a lot nicer and can get rid of the ->sync_page()
hack in the vm.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
nd->inode is not set on the second attempt in path_walk()
unfuck proc_sysctl ->d_compare()
minimal fix for do_filp_open() race
Signed-off-by: David Sharp <dhsharp@google.com>
LKML-Reference: <1291421609-14665-3-git-send-email-dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add an "overwrite" trace_option for ftrace to control whether the buffer should
be overwritten on overflow or not. The default remains to overwrite old events
when the buffer is full. This patch adds the option to instead discard newest
events when the buffer is full. This is useful to get a snapshot of traces just
after enabling traces. Dropping the current event is also a simpler code path.
Signed-off-by: David Sharp <dhsharp@google.com>
LKML-Reference: <1291844807-15481-1-git-send-email-dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In complex subsystems like mac80211 structures can contain several
timers and work structs, so identifying a specific instance from the
call trace and object type output of debugobjects can be hard.
Allow the subsystems which support debugobjects to provide a hint
function. This function returns a pointer to a kernel address
(preferrably the objects callback function) which is printed along
with the debugobjects type.
Add hint methods for timer_list, work_struct and hrtimer.
[ tglx: Massaged changelog, made it compile ]
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
LKML-Reference: <20110307085809.GA9334@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
a) struct inode is not going to be freed under ->d_compare();
however, the thing PROC_I(inode)->sysctl points to just might.
Fortunately, it's enough to make freeing that sucker delayed,
provided that we don't step on its ->unregistering, clear
the pointer to it in PROC_I(inode) before dropping the reference
and check if it's NULL in ->d_compare().
b) I'm not sure that we *can* walk into NULL inode here (we recheck
dentry->seq between verifying that it's still hashed / fetching
dentry->d_inode and passing it to ->d_compare() and there's no
negative hashed dentries in /proc/sys/*), but if we can walk into
that, we really should not have ->d_compare() return 0 on it!
Said that, I really suspect that this check can be simply killed.
Nick?
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This removes the implementation of the big kernel lock,
at last. A lot of people have worked on this in the
past, I so the credit for this patch should be with
everyone who participated in the hunt.
The names on the Cc list are the people that were the
most active in this, according to the recorded git
history, in alphabetical order.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alan Cox <alan@linux.intel.com>
Cc: Alessio Igor Bogani <abogani@texware.it>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Hendry <andrew.hendry@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Jan Blunck <jblunck@infradead.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Paul Menage <menage@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
They are only used inside kernel/ptrace.c, and have been for a long
time. We don't want to go back to the bad-old-days when architectures
did things on their own, so make them static and private.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The build will break if you change the Kconfig to allow
DEBUG_OBJECTS_RCU_HEAD and !PREEMPT, so document the reasoning
near where the breakage would occur.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
DEBUG_OBJECTS_RCU_HEAD depends on PREEMPT, so #ifndef CONFIG_PREEMPT
is totally useless in kernel/rcupdate.c.
Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
linux/sched.h is included twice in kernel/rcutorture.c - once is enough.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Using __rcu_read_lock() in place of rcu_read_lock() leaves any debug
state as it really should be, namely with the lock still held.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Li Zefan reported that the jump label code sleeps and we're calling it
under a spinlock, *fail* ;-)
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In the failure path, we call perf_detach_cgroup(), but we didn't
call perf_get_cgroup() prio to it.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4D6F346E.9070606@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In perf_cgroup_connect(), fput_light() is missing in a failure path.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4D6F3461.6060406@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently, the event is not initialized if pmu is found in idr. This
never causes bug just because now no pmu is associated with the idr
id.
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1298812411.2699.9.camel@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
yield_to_task_fair() has code to resched the CPU of yielding task when the
intention is to resched the CPU of the task that is being yielded to.
Change here fixes the problem and also makes the resched conditional on
rq != p_rq.
Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1299025701-22168-1-git-send-email-venki@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The current scheduler implementation returns -EPERM when trying to
change from SCHED_IDLE to SCHED_OTHER or SCHED_BATCH. Since SCHED_IDLE
is considered to be a nice 20 on steroids, changing to another policy
should be allowed provided the RLIMIT_NICE is accounted for.
This patch allows the following test-case to pass with RLIMIT_NICE=40,
but still fail with RLIMIT_NICE=10 when the calling process is run
from a typical shell (nice 0, or 20 in rlimit terms).
int main()
{
int ret;
struct sched_param sp;
sp.sched_priority = 0;
/* switch to SCHED_IDLE */
ret = sched_setscheduler(0, SCHED_IDLE, &sp);
printf("setscheduler IDLE: %d\n", ret);
if (ret) return ret;
/* switch back to SCHED_OTHER */
ret = sched_setscheduler(0, SCHED_OTHER, &sp);
printf("setscheduler OTHER: %d\n", ret);
return ret;
}
$ ulimit -e
40
$ ./test
setscheduler IDLE: 0
setscheduler OTHER: 0
$ ulimit -e 10
$ ulimit -e
10
$ ./test
setscheduler IDLE: 0
setscheduler OTHER: -1
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
LKML-Reference: <4D657BEE.4040608@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Perform the test for SCHED_IDLE before testing for SCHED_BATCH (and
ensure idle tasks don't preempt idle tasks) so the non-interactive,
but still important, SCHED_BATCH tasks will run in favor of the very
low priority SCHED_IDLE tasks.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Mike Galbraith <efault@gmx.de>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
LKML-Reference: <1298408674-3130-2-git-send-email-dvhart@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The current sched rt code is broken when it comes to hierarchical
scheduling, this patch fixes two problems
1. It adds redundant enqueuing (harmless) when it finds a queue
has tasks enqueued, but it has no run time and it is not
throttled.
2. The most important change is in sched_rt_rq_enqueue/dequeue.
The code just picks the rt_rq belonging to the current cpu
on which the period timer runs, the patch fixes it, so that
the correct rt_se is enqueued/dequeued.
Tested with a simple hierarchy
/c/d, c and d assigned similar runtimes of 50,000 and a while
1 loop runs within "d". Both c and d get throttled, without
the patch, the task just stops running and never runs (depends
on where the sched_rt b/w timer runs). With the patch, the
task is throttled and runs as expected.
[ bharata, suggestions on how to pick the rt_se belong to the
rt_rq and correct cpu ]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@kernel.org
LKML-Reference: <20110303113435.GA2868@balbir.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Netlink message processing in the kernel is synchronous these days, the
session information can be collected when needed.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we enable trace events to trace block actions, We use
blk_fill_rwbs_rq to analyze the corresponding actions
in request's cmd_flags, but we only choose the minor 2 bits
from it, so most of other flags(e.g, REQ_SYNC) are missing.
For example, with a sync write we get:
write_test-2409 [001] 160.013869: block_rq_insert: 3,64 W 0 () 258135 + =
8 [write_test]
Since now we have integrated the flags of both bio and request,
it is safe to pass rq->cmd_flags directly to blk_fill_rwbs and
blk_fill_rwbs_rq isn't needed any more.
With this patch, after a sync write we get:
write_test-2417 [000] 226.603878: block_rq_insert: 3,64 WS 0 () 258135 +=
8 [write_test]
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
We calculate the current time of each clock base by adding an offset
to clock_monotonic. The offset for the clock bases is set in
retrigger_next_event() which is called when we switch a cpu to highres
mode or when the clock was set.
Add the missing update for clock boottime.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <johnstul@us.ibm.com>
The fasteoi handler must mask the interrupt line in oneshot mode
otherwise we end up with an irq storm.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add a commandline parameter "threadirqs" which forces all interrupts except
those marked IRQF_NO_THREAD to run threaded. That's mostly a debug option to
allow retrieving better debug data from crashing interrupt handlers. If
"threadirqs" is not enabled on the kernel command line, then there is no
impact in the interrupt hotpath.
Architecture code needs to select CONFIG_IRQ_FORCED_THREADING after
marking the interrupts which cant be threaded IRQF_NO_THREAD. All
interrupts which have IRQF_TIMER set are implict marked
IRQF_NO_THREAD. Also all PER_CPU interrupts are excluded.
Forced threading hard interrupts also forces all soft interrupt
handling into thread context.
When enabled it might slow down things a bit, but for debugging problems in
interrupt code it's a reasonable penalty as it does not immediately
crash and burn the machine when an interrupt handler is buggy.
Some test results on a Core2Duo machine:
Cache cold run of:
# time git grep irq_desc
non-threaded threaded
real 1m18.741s 1m19.061s
user 0m1.874s 0m1.757s
sys 0m5.843s 0m5.427s
# iperf -c server
non-threaded
[ 3] 0.0-10.0 sec 1.09 GBytes 933 Mbits/sec
[ 3] 0.0-10.0 sec 1.09 GBytes 934 Mbits/sec
[ 3] 0.0-10.0 sec 1.09 GBytes 933 Mbits/sec
threaded
[ 3] 0.0-10.0 sec 1.09 GBytes 939 Mbits/sec
[ 3] 0.0-10.0 sec 1.09 GBytes 934 Mbits/sec
[ 3] 0.0-10.0 sec 1.09 GBytes 937 Mbits/sec
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110223234956.772668648@linutronix.de>
When the per cpu timer is marked CLOCK_EVT_FEAT_C3STOP, then we only
can switch into oneshot mode, when the backup broadcast device
supports oneshot mode as well. Otherwise we would try to switch the
broadcast device into an unsupported mode unconditionally. This went
unnoticed so far as the current available broadcast devices support
oneshot mode. Seth unearthed this problem while debugging and working
around an hpet related BIOS wreckage.
Add the necessary check to tick_is_oneshot_available().
Reported-and-tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <alpine.LFD.2.00.1102252231200.2701@localhost6.localdomain6>
Cc: stable@kernel.org # .21 ->
Fix this warning:
lkml.org/lkml/2011/1/30/124
kernel/sched.c:3719: warning: 'irqtime_account_idle_ticks' defined but not used
kernel/sched.c:3720: warning: 'irqtime_account_process_tick' defined but not used
In a cleaner way than:
7e9498705e: sched: Add #ifdef around irq time accounting functions
This patch will not have any functional impact.
Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Cc: heiko.carstens@de.ibm.com
Cc: a.p.zijlstra@chello.nl
LKML-Reference: <1298675596-10992-1-git-send-email-venki@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we force thread hard and soft interrupts the startup of ksoftirqd
would hang in kthread_bind() when wait_task_inactive() calls
schedule_timeout_uninterruptible() because there is no softirq yet
which will wake us up.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110223234956.677109139@linutronix.de>
Support ONESHOT on shared interrupts, if all drivers agree on it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110223234956.483640430@linutronix.de>
For level type interrupts we need to track how many threads are on
flight to avoid useless interrupt storms when not all thread handlers
have finished yet. Keep track of the woken threads and only unmask
when there are no more threads in flight.
Yes, I'm lazy and using a bitfield. But not only because I'm lazy, the
main reason is that it's way simpler than using a refcount. A refcount
based solution would need to keep track of various things like
crashing the irq thread, spurious interrupts coming in,
disables/enables, free_irq() and some more. The bitfield keeps the
tracking simple and makes things just work. It's also nicely confined
to the thread code pathes and does not require additional checks all
over the place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110223234956.388095876@linutronix.de>
The WARN_ON_ONCE in handle_percpu_event() which emits a warning when
an action handler returns with interrupts enabled is not really
useful. It does not reveal the interrupt number and handler function
which caused it. Make it WARN_ONCE() and add the information.
Reported-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Get rid of this:
kernel/sched.c:3731:13: warning: 'irqtime_account_idle_ticks' defined but not used
kernel/sched.c:3732:13: warning: 'irqtime_account_process_tick' defined but not used
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110225133228.GD7469@osiris.boeblingen.de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There is no point in us having different code paths for nmi and !nmi
here, so remove the !nmi one.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patches ensures that we do not end up calling
perf_cgroup_from_task() when there is no cgroup event.
This avoids potential RCU and locking issues.
The change in perf_cgroup_set_timestamp() ensures we
check against ctx->nr_cgroups. It also avoids calling
perf_clock() tiwce in a row. It also ensures we do need
to grab ctx->lock before calling the function.
We drop update_cgrp_time() from task_clock_event_read()
because it is not needed. This also avoids having to
deal with perf_cgroup_from_task().
Thanks to Peter Zijlstra for his help on this.
Signed-off-by: Stephane Eranian <eranian@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d5e76b8.815bdf0a.7ac3.774f@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Disown it, and only display autogroup association if one exists.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1298383320.8036.5.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
when autogroup is disable from the beginning,
sched_autogroup_create_attach()
autogroup_move_group() <== 1
sched_move_task() <== 2
task_move_group_fair()
set_task_rq()
task_group()
autogroup_task_group()
We go the whole path without doing anything useful.
Then stop going further if autogroup is disabled.
But there will be a race window between 1 and 2, in which
sysctl_sched_autogroup_enabled is enabled. This issue
will be toke by following patch.
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1298185696-4403-4-git-send-email-yong.zhang0@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
sched_autogroup_enabled has min/max value, proc_dointvec_minmax() is
be used for this case.
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1298185696-4403-2-git-send-email-yong.zhang0@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On a 2*6*2 machine something like:
taskset -c 3-11 bash -c 'for ((i=0;i<9;i++)) do while :; do :; done & done'
_should_ result in 9 busy CPUs, each running 1 task.
However it didn't quite work reliably, most of the time one cpu of the
second socket (6-11) would be idle and one cpu of the first socket
(0-5) would have two tasks on it.
The group_imb logic is supposed to deal with this and detect when a
particular group is imbalanced (like in our case, 0-2 are idle but 3-5
will have 4 tasks on it).
The detection phase needed a bit of a tweak as it was too weak and
required more than 2 avg weight tasks difference between idle and busy
cpus in the group which won't trigger for our test-case. So cure that
to be one or more avg task weight difference between cpus.
Once the detection phase worked, it was then defeated by the f_b_g()
tests trying to avoid ping-pongs. In particular, this_load >= max_load
triggered because the pulling cpu (the (first) idle cpu in on the
second socket, say 6) would find this_load to be 5 and max_load to be
4 (there'd be 5 tasks running on our socket and only 4 on the other
socket).
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The existing comment tends to grow state (as it already has), split it
up and place it near the actual tests.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With the wholesale removal of the sd_idle SMT logic we can clean up
some more.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
"def_bool n" without prompt is pointless, these should be just "bool".
[ tglx: Adapted to latest changes ]
Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <4D5D3309020000780003264A@vpn.id2.novell.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We just leave the numbers assinged as commemoration and in case that
someone was crazy enough to reimplement the test stuff out of tree.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
genirq: Disable the SHIRQ_DEBUG call in request_threaded_irq for now
genirq: Prevent access beyond allocated_irqs bitmap
note_interrupt wants to be called with the combined result of all
handlers called, not with the last one. If it's a shared interrupt
then the last handler might return IRQ_NONE often enough to trigger
the spurious dectector which turns off a perfectly fine working
interrupt line. Bug was introduced in commit 1277a532(genirq: Simplify
handle_irq_event()).
Yes, I really messed up there. First the variable ret should not have
been named differently to avoid similarity with retval. Second it
should have been declared in the do {} loop.
Rename it to res and move it into the do {} loop and vanish under a
huge brown paperbag.
Reported-bisected-tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch exports CLOCK_BOOTTIME through the posix timers interface
CC: Jamie Lokier <jamie@shareable.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Alexander Shishkin <virtuoso@slind.org>
CC: Arve Hjønnevåg <arve@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
CLOCK_MONOTONIC stops while the system is in suspend. This is because
to applications system suspend is invisible. However, there is a
growing set of applications that are wanting to be suspend-aware,
but do not want to deal with the complications of CLOCK_REALTIME
(which might jump around if settimeofday is called).
For these applications, I propose a new clockid: CLOCK_BOOTTIME.
CLOCK_BOOTTIME is idential to CLOCK_MONOTONIC, except it also
includes any time spent in suspend.
This patch add hrtimer base for CLOCK_BOOTTIME, using
get_monotonic_boottime/ktime_get_boottime, to allow
in kernel users to set timers against.
CC: Jamie Lokier <jamie@shareable.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Alexander Shishkin <virtuoso@slind.org>
CC: Arve Hjønnevåg <arve@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
This adds new functions that return the monotonic time since boot
(in other words, CLOCK_MONOTONIC + suspend time).
CC: Jamie Lokier <jamie@shareable.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Alexander Shishkin <virtuoso@slind.org>
CC: Arve Hjønnevåg <arve@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
The hrtimer code is written mainly with CLOCK_REALTIME and CLOCK_MONOTONIC
in mind. These are clockids 0 and 1 resepctively. However, if we are
to introduce any new hrtimer bases, using new clockids, we have to skip
the cputimers (clockids 2,3) as well as other clockids that may not impelement
timers.
This patch adds a little bit of indirection between the clockid and
the base, so that we can extend the base by one when we add
a new clockid at number 7 or so.
CC: Jamie Lokier <jamie@shareable.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Alexander Shishkin <virtuoso@slind.org>
CC: Arve Hjønnevåg <arve@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
The switch case in __irq_set_trigger() lacks a break, which emits a
pr_err unconditionally on success.
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The runtime expansion of nr_irqs does not take into account that
bitmap_find_next_zero_area() returns "start" + size in case the search
for an matching zero area fails. That results in a start value which
can be completely off and is not covered by the following
expand_nr_irqs() and possibly outside of the absolute limit. But we
use it without further checking.
Use IRQ_BITMAP_BITS as the limit for the bitmap search and expand
nr_irqs when the start bit is beyond nr_irqs. So start is always
pointing to the correct area in the bitmap. nr_irqs is just the limit
for irq enumerations, not the real limit for the irq space.
[ tglx: Let irq_expand_nr_irqs() take the new upper end so we do not
expand nr_irqs more than necessary. Made changelog readable ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D6014F9.8040605@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We lazy disable interrupt lines, so only mark the line masked, when
the chip provides an irq_disable callback.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
wq:fixes-2.6.38 does s/WQ_FREEZEABLE/WQ_FREEZABLE and wq:for-2.6.39
adds new usage of the flag. The combination of the two creates a
build failure after merge. Fix it by renaming all freezeables to
freezables.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
No need to lookup the irq descriptor when calling from a chip callback
function which has irq_data already handy.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Some chips want irq_eoi() only called when an interrupt is actually
handled. So they have checks for INPROGRESS and DISABLED in their
irq_eoi callbacks. Add a chip flag, which allows to handle that in the
generic code. No impact on the fastpath.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
sparc64 needs to call a preflow handler on certain interrupts befor
calling the action chain. Integrate it into handle_fasteoi_irq. Must
be enabled via CONFIG_IRQ_FASTEOI_PREFLOW. No impact when disabled.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David S. Miller <davem@davemloft.net>
Most of the managing functions get the irq descriptor and lock it -
either with or without buslock. Instead of open coding this over and
over provide a common function to do that.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If everything uses the right accessors, then enabling
GENERIC_HARDIRQS_NO_COMPAT should just work. If not it will tell you.
Don't be lazy and use the trick which I use in the core code!
git grep status_use_accessors
will unearth it in a split second. Offenders are tracked down and not
slapped with stinking trouts. This time we use frozen shark for a
better educational value.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Some irq_chips need to know the state of wakeup mode for
setting the trigger type etc. Reflect it in irq_data state.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
irq_chips, which require to mask the chip before changing the trigger
type should set this flag. So the core takes care of it and the
requirement for looking into desc->status in the chip goes away.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
That's the data structure chip functions get provided. Also allow them
to signal the core code that they updated the flags in irq_data.state
by returning IRQ_SET_MASK_OK_NOCOPY. The default is unchanged.
The type bits should be accessed via:
val = irqd_get_trigger_type(irqdata);
and
irqd_set_trigger_type(irqdata, val);
Coders who access them directly will be tracked down and slapped with
stinking trouts.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
That's the right data structure to look at for arch code.
Accessor functions are provided.
irqd_is_per_cpu(irqdata);
irqd_can_balance(irqdata);
Coders who access them directly will be tracked down and slapped with
stinking trouts.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The saving of this switch is minimal versus the ifdef mess it
creates. Simple enable PER_CPU unconditionally and remove the config
switch.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
chip implementations need to know about it. Keep status in sync until
all users are fixed.
Accessor function: irqd_is_setaffinity_pending(irqdata)
Coders who access them directly will be tracked down and slapped with
stinking trouts.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We need to maintain the flag for now in both fields status and istate.
Add a CONFIG_GENERIC_HARDIRQS_NO_COMPAT switch to allow testing w/o
the status one. Wrap the access to status IRQ_INPROGRESS in a inline
which can be turned of with CONFIG_GENERIC_HARDIRQS_NO_COMPAT along
with the define.
There is no reason that anything outside of core looks at this. That
needs some modifications, but we'll get there.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The irq_desc.status field will either go away or renamed to
settings. Anyway we need to maintain compatibility to avoid breaking
the world and some more. While moving bits into the core, I need to
avoid that I use any of the still existing IRQ_ bits in the core code
by typos. So that file will hold the inline wrappers and some nasty
CPP tricks to break the build when typoed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
That field will contain internal state information which is not going
to be exposed to anything outside the core code - except via accessor
functions. I'm tired of everyone fiddling in irq_desc.status.
core_internal_state__do_not_mess_with_it is clear enough, annoying to
type and easy to grep for. Offenders will be tracked down and slapped
with stinking trouts.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
All archs implement show_interrupts() in more or less the same
way. That's tons of duplicated code with different bugs with no
value. Implement a generic version and deprecate show_interrupts()
Unfortunately we need some ifdeffery for !GENERIC_HARDIRQ archs.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
It's safe to drop the IRQ_INPROGRESS flag between action chain walks
as we are protected by desc->lock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Core code replacement for the ugly camel case. It contains all the
code which is shared in all handlers.
clear status flags
set INPROGRESS flag
unlock
call action chain
note_interrupt
lock
clr INPROGRESS flag
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
IRQ_MASKED is set in mask_ack_irq() anyway. Remove it from
handle_edge_irq() to allow simpler ab^HHreuse of that function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110202212551.918484270@linutronix.de>
Now that everything uses the wrappers, we can remove the default
functions. None of those functions is performance critical.
That makes the IRQ_MASKED flag tracking fully consistent.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Aside of duplicated code some of the startup/shutdown sites do not
handle the MASKED/DISABLED flags and the depth field at all. Move that
to a helper function and take care of it there.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110202212551.787481468@linutronix.de>
The if (chip->irq_shutdown) check will always evaluate to true, as we
fill in chip->irq_shutdown with default_shutdown in
irq_chip_set_defaults() if the chip does not provide its own function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110202212551.667607458@linutronix.de>
With the chip.end() function gone we might run into a situation where
a poll call runs and the real interrupt comes in, sees IRQ_INPROGRESS
and disables the line. That might be a perfect working one, which will
then be masked forever.
So mark them polled while the poll runs. When the real handler sees
IRQ_INPROGRESS it checks the poll flag and waits for the polling to
complete. Add the necessary amount of sanity checks to it to avoid
deadlocks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
There is no point in polling disabled lines.
percpu does not make sense at all because we only poll on the cpu
we're currently running on. Also polling per_cpu interrupts is racy as
hell. The handler runs without locking so we might get a huge
surprise.
If the timer interrupt needs polling, then we wont get there anyway.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
try_one_irq() contains redundant code and lots of useless checks for
shared interrupts. Check for shared before setting IRQ_INPROGRESS and
then call handle_IRQ_event() while pending. Shorter version with the
same functionality.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We run all handlers with interrupts disabled and expect them not to
enable them. Warn when we catch one who does.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We cannot walk the action chain unlocked. Even if IRQ_INPROGRESS is
set an action can be removed and we follow a null pointer. It's safe
to take the lock there, because the code which removes the action will
call synchronize_irq() which waits unlocked for IRQ_INPROGRESS going
away.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
While rumaging through arch code I found that there are a few
workarounds which deal with the fact that the initial affinity setting
from request_irq() copies the mask into irq_data->affinity before the
chip code is called. In the normal path we unconditionally copy the
mask when the chip code returns 0.
Copy after the code is called and add a return code
IRQ_SET_MASK_OK_NOCOPY for the chip functions, which prevents the
copy. That way we see the real mask when the chip function decided to
truncate it further as some arches do. IRQ_SET_MASK_OK is 0, which is
the current behaviour.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If the affinity had been set by the user, then a later request_irq()
will honour that setting. But online cpus can have changed. So apply
the online mask and for this case as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
There is lot of #ifdef CONFIG_GENERIC_PENDING_IRQ along with
duplicated code in the irq core. Move the #ifdeffery into one place
and cleanup the code so it's readable. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The irq namespace has become quite convoluted. My bad. Clean it up
and deprecate the old functions. All new functions follow the scheme:
irq number based:
irq_set/get/xxx/_xxx(unsigned int irq, ...)
irq_data based:
irq_data_set/get/xxx/_xxx(struct irq_data *d, ....)
irq_desc based:
irq_desc_get_xxx(struct irq_desc *desc)
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
chips behind a slow bus cannot update the chip under desc->lock, but
we miss the chip_buslock/chip_bus_sync_unlock() calls around the set
type and set wake functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We face more and more the requirement to expand nr_irqs at
runtime. The reason are irq expanders which can not be detected in the
early boot stage. So we speculate nr_irqs to have enough room. Further
Xen needs extra irq numbers and we really want to avoid adding more
"detection" code into the early boot. There is no real good reason why
we need to limit nr_irqs at early boot.
Allow the allocation code to expand nr_irqs. We have already 8k extra
number space in the allocation bitmap, so lets use it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
With CONFIG_SHIRQ_DEBUG=y we call a newly installed interrupt handler
in request_threaded_irq().
The original implementation (commit a304e1b8) called the handler
_BEFORE_ it was installed, but that caused problems with handlers
calling disable_irq_nosync(). See commit 377bf1e4.
It's braindead in the first place to call disable_irq_nosync in shared
handlers, but ....
Moving this call after we installed the handler looks innocent, but it
is very subtle broken on SMP.
Interrupt handlers rely on the fact, that the irq core prevents
reentrancy.
Now this debug call violates that promise because we run the handler
w/o the IRQ_INPROGRESS protection - which we cannot apply here because
that would result in a possibly forever masked interrupt line.
A concurrent real hardware interrupt on a different CPU results in
handler reentrancy and can lead to complete wreckage, which was
unfortunately observed in reality and took a fricking long time to
debug.
Leave the code here for now. We want this debug feature, but that's
not easy to fix. We really should get rid of those
disable_irq_nosync() abusers and remove that function completely.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: stable@kernel.org # .28 -> .37
Lars-Peter Clausen pointed out:
I stumbled upon this while looking through the existing archs using
SPARSE_IRQ. Even with SPARSE_IRQ the NR_IRQS is still the upper
limit for the number of IRQs.
Both PXA and MMP set NR_IRQS to IRQ_BOARD_START, with
IRQ_BOARD_START being the number of IRQs used by the core.
In various machine files the nr_irqs field of the ARM machine
defintion struct is then set to "IRQ_BOARD_START + NR_BOARD_IRQS".
As a result "nr_irqs" will greater then NR_IRQS which then again
causes the "allocated_irqs" bitmap in the core irq code to be
accessed beyond its size overwriting unrelated data.
The core code really misses a sanity check there.
This went unnoticed so far as by chance the compiler/linker places
data behind that bitmap which gets initialized later on those affected
platforms.
So the obvious fix would be to add a sanity check in early_irq_init()
and break all affected platforms. Though that check wants to be
backported to stable as well, which will require to fix all known
problematic platforms and probably some more yet not known ones as
well. Lots of churn.
A way simpler solution is to allocate a slightly larger bitmap and
avoid the whole churn w/o breaking anything. Add a few warnings when
an arch returns utter crap.
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org # .37
Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
* 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: make sure MAYDAY_INITIAL_TIMEOUT is at least 2 jiffies long
workqueue, freezer: unify spelling of 'freeze' + 'able' to 'freezable'
workqueue: wake up a worker when a rescuer is leaving a gcwq
The ADJ_SETOFFSET code redundantly checks the range of the nanoseconds
field of the time value. This field is checked again in the subsequent
call to timekeeping_inject_offset(). Also, as is, the check will not
detect whether the number of microseconds is out of range.
Let timekeeping_inject_offset() do the error checking.
Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Cc: johnstul@us.ibm.com
LKML-Reference: <20110218090724.GA2924@riccoc20.at.omicron.at>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This reverts commit 5e38ca8f3e.
Breaks the build of several !CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
architectures.
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Message-ID: <20110217171823.GB17058@elte.hu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently we return 0 in swsusp_alloc() when alloc_image_page() fails.
Fix that. Also remove unneeded "error" variable since the only
useful value of error is -ENOMEM.
[rjw: Fixed up the changelog and changed subject.]
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: stable@kernel.org
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
MAYDAY_INITIAL_TIMEOUT is defined as HZ / 100 and depending on
configuration may end up 0 or 1. Even when it's 1, depending on when
the mayday timer is added in the current jiffy interval, it may expire
way before a jiffy has passed.
Make sure MAYDAY_INITIAL_TIMEOUT is at least two to guarantee that at
least a full jiffy has passed before calling rescuers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ray Jui <rjui@broadcom.com>
Cc: stable@kernel.org
There are two spellings in use for 'freeze' + 'able' - 'freezable' and
'freezeable'. The former is the more prominent one. The latter is
mostly used by workqueue and in a few other odd places. Unify the
spelling to 'freezable'.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Twice I had to explain the output about why lockdep gives an error with
locks in IRQ context and with del_timer_sync(). Might as well write it
up and place it in the comments above the code in del_timer_sync().
Perhaps the next time this lockdep dump triggers people will understand
the issues.
It is a ticky issue and very subtle, explaining it in detail in the code
may help others understand the issue when they stumble upon the bug
again.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1297186794.23343.19.camel@gandalf.stny.rr.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
sd_idle logic was introduced way back in 2005 (commit 5969fe06),
as an HT optimization.
As per the discussion in the thread here:
lkml - sched: Resolve sd_idle and first_idle_cpu Catch-22 - v1
https://patchwork.kernel.org/patch/532501/
The capacity based logic in the load balancer right now handles this
in a much cleaner way, handling more than 2 SMT siblings etc, and sd_idle
does not seem to bring any additional benefits. sd_idle logic also has
some bugs that has performance impact. Here is the patch that removes
the sd_idle logic altogether.
Also, there was a dependency of sched_mc_power_savings == 2, with sd_idle
logic.
Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Acked-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1297723130-693-1-git-send-email-venki@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There is no need to re-initialize the hrtimer every time we start it,
so don't do that (shaves a few cycles). Also, since we know hrtimers
run at a fixed rate (nanoseconds) we can pre-compute the desired
frequency at which they tick. This avoids us having to go through the
whole adaptive frequency feedback logic (shaves another few cycles).
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1297448589.5226.47.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
By pre-computing the maximum number of samples per tick we can avoid a
multiplication and a conditional since MAX_INTERRUPTS >
max_samples_per_tick.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This kernel patch adds the ability to filter monitoring based on
container groups (cgroups). This is for use in per-cpu mode only.
The cgroup to monitor is passed as a file descriptor in the pid
argument to the syscall. The file descriptor must be opened to
the cgroup name in the cgroup filesystem. For instance, if the
cgroup name is foo and cgroupfs is mounted in /cgroup, then the
file descriptor is opened to /cgroup/foo. Cgroup mode is
activated by passing PERF_FLAG_PID_CGROUP in the flags argument
to the syscall.
For instance to measure in cgroup foo on CPU1 assuming
cgroupfs is mounted under /cgroup:
struct perf_event_attr attr;
int cgroup_fd, fd;
cgroup_fd = open("/cgroup/foo", O_RDONLY);
fd = perf_event_open(&attr, cgroup_fd, 1, -1, PERF_FLAG_PID_CGROUP);
close(cgroup_fd);
Signed-off-by: Stephane Eranian <eranian@google.com>
[ added perf_cgroup_{exit,attach} ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590250.114ddf0a.689e.4482@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make the ::exit method act like ::attach, it is after all very nearly
the same thing.
The bug had no effect on correctness - fixing it is an optimization for
the scheduler. Also, later perf-cgroups patches rely on it.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Menage <menage@google.com>
LKML-Reference: <1297160655.13327.92.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It was possible to call pmu::start() on an already running event. In
particular this lead so some wreckage as the hrtimer events would
re-initialize active timers.
This was due to throttled events being activated again by scheduling.
Scheduling in a context would add and force start events, resulting in
running events with a possible throttle status. The next tick to hit
that task will then try to unthrottle the event and call ->start() on
an already running event.
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Fix text_poke_smp_batch() deadlock
perf tools: Fix thread_map event synthesizing in top and record
watchdog, nmi: Lower the severity of error messages
ARM: oprofile: Fix backtraces in timer mode
oprofile: Fix usage of CONFIG_HW_PERF_EVENTS for oprofile_perf_init and friends
This patch enables gcov kernel profiling over the whole kernel for sh.
Profiling of specific files individually already worked. A handful of
files have to be explicitly excluded from the profiling to avoid
breaking things, notably pmb.c.
Signed-off-by: Chris Smith <chris.smith@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
After executing the matching works, a rescuer leaves the gcwq whether
there are more pending works or not. This may decrease the
concurrency level to zero and stall execution until a new work item is
queued on the gcwq.
Make rescuer wake up a regular worker when it leaves a gcwq if there
are more works to execute, so that execution isn't stalled.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ray Jui <rjui@broadcom.com>
Cc: stable@kernel.org
Add NULL check for avoiding NULL pointer deref.
This bug has been introduced by:
1ff511e35e: tracing/kprobes: Add bitfield type
which causes a null pointer dereference bug when kprobe-tracer
parses an argument without type.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110214054807.8919.69740.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
pci: use security_capable() when checking capablities during config space read
security: add cred argument to security_capable()
tpm_tis: Use timeouts returned from TPM
The wake_up_process() call in ptrace_detach() is spurious and not
interlocked with the tracee state. IOW, the tracee could be running or
sleeping in any place in the kernel by the time wake_up_process() is
called. This can lead to the tracee waking up unexpectedly which can be
dangerous.
The wake_up is spurious and should be removed but for now reduce its
toxicity by only waking up if the tracee is in TRACED or STOPPED state.
This bug can possibly be used as an attack vector. I don't think it
will take too much effort to come up with an attack which triggers oops
somewhere. Most sleeps are wrapped in condition test loops and should
be safe but we have quite a number of places where sleep and wakeup
conditions are expected to be interlocked. Although the window of
opportunity is tiny, ptrace can be used by non-privileged users and with
some loading the window can definitely be extended and exploited.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the fuction graph tracer starts, it needs to make a special
stack for each task to save the real return values of the tasks.
All running tasks have this stack created, as well as any new
tasks.
On CPU hot plug, the new idle task will allocate a stack as well
when init_idle() is called. The problem is that cpu hotplug does
not create a new idle_task. Instead it uses the idle task that
existed when the cpu went down.
ftrace_graph_init_task() will add a new ret_stack to the task
that is given to it. Because a clone will make the task
have a stack of its parent it does not check if the task's
ret_stack is already NULL or not. When the CPU hotplug code
starts a CPU up again, it will allocate a new stack even
though one already existed for it.
The solution is to treat the idle_task specially. In fact, the
function_graph code already does, just not at init_idle().
Instead of using the ftrace_graph_init_task() for the idle task,
which that function expects the task to be a clone, have a
separate ftrace_graph_init_idle_task(). Also, we will create a
per_cpu ret_stack that is used by the idle task. When we call
ftrace_graph_init_idle_task() it will check if the idle task's
ret_stack is NULL, if it is, then it will assign it the per_cpu
ret_stack.
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fixups due to rename of event_t routines from event__ to perf_event__
done in perf/core.
Conflicts:
tools/perf/builtin-record.c
tools/perf/builtin-top.c
tools/perf/util/event.c
tools/perf/util/event.h
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Expand security_capable() to include cred, so that it can be usable in a
wider range of call sites.
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
In commit ce6ada35bd ("security: Define CAP_SYSLOG") Serge Hallyn
introduced CAP_SYSLOG, but broke backwards compatibility by no longer
accepting CAP_SYS_ADMIN as an override (it would cause a warning and
then reject the operation).
Re-instate CAP_SYS_ADMIN - but keeping the warning - as an acceptable
capability until any legacy applications have been updated. There are
apparently applications out there that drop all capabilities except for
CAP_SYS_ADMIN in order to access the syslog.
(This is a re-implementation of a patch by Serge, cleaning the logic up
and making the code more readable)
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reason: irq/for-mips is provided for mips to make core independent
progress. Merge it into irq/core to avoid conflicts
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
irq_chips that supply .irq_bus_lock/.irq_bus_sync_unlock functions,
expect that the other chip methods will be called inside of calls to
the pair. If this expectation is not met, things tend to not work.
Make setup_irq() call chip_bus_lock()/chip_bus_sync_unlock() too.
For the vast majority of irq_chips, this will be a NOP as most don't
have these bus lock functions.
[ tglx: No we don't want to call that in __setup_irq(). Way too many
error exit pathes. ]
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
LKML-Reference: <1297296265-18680-1-git-send-email-ddaney@caviumnetworks.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
During boot if the hardlockup detector fails to initialize, it
complains very loudly. Some failures should be expected under
certain situations, ie no lapics, or resource in-use. Tone
those error messages down a bit. Keep the rest at a high level.
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Tested-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1297278153-21111-1-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
cdrom: support devices that have check_events but not media_changed
cfq-iosched: Don't wait if queue already has requests.
blkio-throttle: Avoid calling blkiocg_lookup_group() for root group
cfq: rename a function to give it more appropriate name
cciss: make cciss_revalidate not loop through CISS_MAX_LUNS volumes unnecessarily.
drivers/block/aoe/Makefile: replace the use of <module>-objs with <module>-y
loop: queue_lock NULL pointer derefence in blk_throtl_exit
drivers/block/Makefile: replace the use of <module>-objs with <module>-y
blktrace: Don't output messages if NOTIFY isn't set.
tracing_enabled should not be used, it is heavy weight and does not
do much in helping lower the overhead.
tracing_on should be used instead. Warn users to use tracing_on
when tracing_enabled is used as it will soon be removed from the
tracing directory.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace events sched_switch and sched_wakeup do the same thing
as the stand alone sched_switch tracer does. It is no longer needed.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
CONFIG_KSTAT_IRQS_ONDEMAND does not exist. It's not worth to implement
it. Use sparse irqs if you care about memory consumption of the
interrupt layer.
Found by undertaker: http://vamos.informatik.uni-erlangen.de/trac/undertaker
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
ksoftirqd() calls do_softirq() which switches stacks on several
architectures. That makes no sense at all. ksoftirqd's stack is
sufficient.
Call __do_softirq() directly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: David Miller <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Reviewed-by: Frank Rowand <frank.rowand@am.sony.com>
LKML-Reference: <alpine.LFD.2.00.1102021704530.31804@localhost6.localdomain6>
The warning "Delta way too big" warning might appear on a system with
unstable shed clock right after the system is resumed and tracing
was enabled during the suspend.
Since it's not realy bug, and the unstable sched clock is working
fast and reliable otherwise, Steven suggested to keep using the
sched clock in any case and just to make note in the warning itself.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1296649698-6003-1-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
irq/for-xen contains new functionality to avoid Xen private irq
hackery. That branch has a single irq commit and is pulled by Xen to
base their new features on.
Merge it into irq/core as other patches modify the same code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Xen needs to reenable interrupts which are marked IRQF_NO_SUSPEND in the
resume path. Add a flag to force the reenabling in the resume code.
Tested-and-acked-by: Ian Campbell <Ian.Campbell@eu.citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Both attempts at trying to allow softirq usage for
del_timer_sync() failed (produced bogus warnings),
so revert the commit for this release:
f266a5110d: lockdep, timer: Fix del_timer_sync() annotation
and try again later.
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yong Zhang <yong.zhang0@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1297174680.13327.107.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Many system calls are unimplemented and mapped to sys_ni_syscall, but at
boot ftrace would still search through every syscall metadata entry for
a match which wouldn't be there.
This patch adds causes the search to terminate early if the system call
is not mapped.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-7-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some architectures have unusual symbol names and the generic code to
match the symbol name with the function name for the syscall metadata
will fail. For example, symbols on PPC64 start with a period and the
generic code will fail to match them.
This patch moves the match logic out into a separate function which an
arch can override by defining ARCH_HAS_SYSCALL_MATCH_SYM_NAME in
asm/ftrace.h and implementing arch_syscall_match_sym_name.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-5-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some architectures use non-trivial system call tables and will not work
with the generic arch_syscall_addr code. For example, PowerPC64 uses a
table of twin long longs.
This patch makes the generic arch_syscall_addr weak to allow
architectures with non-trivial system call tables to override it.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-4-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the ftrace events now checking if the syscall_nr is valid upon
initialisation it should no longer be possible to register or unregister
a syscall event without a valid syscall_nr since they should not be
created. This adds a WARN_ON_ONCE in the register and unregister
functions to locate potential regressions in the future.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-3-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
FTRACE_SYSCALLS would create events for each and every system call, even
if it had failed to map the system call's name with it's number. This
resulted in a number of events being created that would not behave as
expected.
This could happen, for example, on architectures who's symbol names are
unusual and will not match the system call name. It could also happen
with system calls which were mapped to sys_ni_syscall.
This patch changes the default system call number in the metadata to -1.
If the system call name from the metadata is not successfully mapped to
a system call number during boot, than the event initialisation routine
will now return an error, preventing the event from being created.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-2-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Because the filters are processed first and then activated
(added to the call), we no longer need to worry about the preds
of the filter in __alloc_preds() being used. As the filter that
is allocating preds is not activated yet.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When creating a new filter, instead of allocating the filter to the
event call first and then processing the filter, it is easier to
process a temporary filter and then just swap it with the call filter.
By doing this, it simplifies the code.
A filter is allocated and processed, when it is done, it is
swapped with the call filter, synchronize_sched() is called to make
sure all callers are done with the old filter (filters are called
with premption disabled), and then the old filter is freed.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
