This replaces uses of new_encode_dev/new_decode_dev with their 64-bit
counterparts, huge_encode_dev/huge_decode_dev respectively.
This is just for clarification and has no impact on the disk format.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
deactivate_super was replaced with deactivate_locked_super, but the
comment of nilfs_get_sb remain unchanged. This renews the comment.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
MS_VERBOSE is deprecated. This replaces it with MS_SILENT in
reference to get_sb_bdev function.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
An fmode_t argument is passed to kill_block_super() through s_mode
member of the super_block structure. This is used to release the
block device with the same mode, however, nilfs does not set s_mode
anywhere.
This modifies nilfs_get_sb function to properly initialize the s_mode
member.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The second argument of open_bdev_exclusive/close_bdev_exclusive takes
fmode_t flags instead of mount flags. This fixes the misuse.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Nilfs maintains two super blocks, and selects the new one on mount
time if they both have valid checksums and their timestamps differ.
However, this has potential for mis-selection since the system clock
may be rewinded and the resolution of the timestamps is not high.
Usually this doesn't become an issue because both super blocks are
updated at the same time when the file system is unmounted. Even if
the file system wasn't unmounted cleanly, the roll-forward recovery
will find the proper log which stores the latest super root. Thus,
the issue can appear only if update of one super block fails and the
clock happens to be rewinded.
This fixes the issue by using checkpoint numbers instead of timestamps
to pick the super block storing the location of the latest log.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds missing endian conversions in comparision of the magic
number of super blocks. It was coincidence that prior versions didn't
incur problems; the upper byte of the magic number happened to be
equal to the lower byte. But, semantically it's wrong to depend on
this.
This won't change anything else nor suffer any compatibility issues.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This kills the following sparse warnings:
fs/nilfs2/segment.c:567:28: warning: symbol 'nilfs_sc_file_ops' was not declared. Should it be static?
fs/nilfs2/segment.c:617:28: warning: symbol 'nilfs_sc_dat_ops' was not declared. Should it be static?
fs/nilfs2/segment.c:625:28: warning: symbol 'nilfs_sc_dsync_ops' was not declared. Should it be static?
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The implementation of persistent object allocator (alloc.c) is poorly
documented. This adds kernel doc style comments on that functions.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
In nilfs_segctor_thread(), timer is a local variable allocated on stack. Its
address can't be set to sci->sc_timer and passed in several procedures.
It works now by chance, just because other procedures are called by
nilfs_segctor_thread() directly or indirectly and the stack hasn't been
deallocated yet.
Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
There are only two lines of code in nilfs_segctor_init(). From a logic
design view, the first line 'sci->sc_seq_done = sci->sc_seq_request;'
should be put in nilfs_segctor_new(). Even in nilfs_segctor_new(),
this initialization is needless because sci is kzalloc-ed. So
nilfs_segctor_init() is only a wrap call to
nilfs_segctor_start_thread().
Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds a field to record the latest checkpoint number in the
nilfs_segment_summary structure. This will help to recover the latest
checkpoint number from logs on disk. This field is intended for
crucial cases in which super blocks have lost pointer to the latest
log.
Even though this will change the disk format, both backward and
forward compatibility is preserved by a size field prepared in the
segment summary header.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Printing a message after loading a file system is a practice. Add this to
provide a better user-friendly experience.
Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This cleanup patch gives several improvements:
- Moving all kmem_cache_{create_destroy} calls into one place, which removes
some small function calls, cleans up error check code and clarify the logic.
- Mark all initial code in __init section.
- Remove some very obvious comments.
- Adjust some declarations.
- Fix some space-tab issues.
Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This moves a pointer to buffer storing super root block to each log
buffer from nilfs_sc_info struct for simplicity.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Like ext3, nilfs has 'errors' mount option to allow specifying desired
behavior on severe errors.
Currently, the default action is 'errors=continue' and has potential
to advance filesystem corruption for severe errors.
This will change the action to 'errors=remount-ro' to avoid the issue.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
nilfs_btree_release_path() and nilfs_btree_free_path() are bound into each other
tightly. Make them into one procedure to clearify the logic and avoid some
misusages.
Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
nilfs_btree_alloc_path() and nilfs_btree_init_path() are bound into each other
tightly. Make them into one procedure to clearify the logic and avoid some
misusages.
Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
As of 32a88aa1, __sync_filesystem() will return 0 if s_bdi is not set.
And nilfs does not set s_bdi anywhere. I noticed this problem by the
warning introduced by the recent commit 5129a469 ("Catch filesystem
lacking s_bdi").
WARNING: at fs/super.c:959 vfs_kern_mount+0xc5/0x14e()
Hardware name: PowerEdge 2850
Modules linked in: nilfs2 loop tpm_tis tpm tpm_bios video shpchp pci_hotplug output dcdbas
Pid: 3773, comm: mount.nilfs2 Not tainted 2.6.34-rc6-debug #38
Call Trace:
[<c1028422>] warn_slowpath_common+0x60/0x90
[<c102845f>] warn_slowpath_null+0xd/0x10
[<c1095936>] vfs_kern_mount+0xc5/0x14e
[<c1095a03>] do_kern_mount+0x32/0xbd
[<c10a811e>] do_mount+0x671/0x6d0
[<c1073794>] ? __get_free_pages+0x1f/0x21
[<c10a684f>] ? copy_mount_options+0x2b/0xe2
[<c107b634>] ? strndup_user+0x48/0x67
[<c10a81de>] sys_mount+0x61/0x8f
[<c100280c>] sysenter_do_call+0x12/0x32
This ensures to set s_bdi for nilfs and fixes the sync silent failure.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After merging the block tree, today's linux-next build (powerpc ppc64_defconfig)
failed like this:
fs/nilfs2/the_nilfs.c: In function 'nilfs_discard_segments':
fs/nilfs2/the_nilfs.c:673: error: 'DISCARD_FL_BARRIER' undeclared (first use in this function)
Caused by commit fbd9b09a17 ("blkdev:
generalize flags for blkdev_issue_fn functions") interacting with commit
e902ec9906 ("nilfs2: issue discard request
after cleaning segments") (which netered Linus' tree on about March 4 -
before v2.6.34-rc1).
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
nilfs2: fix typo "numer" -> "number" in alloc.c
nilfs2: Remove an uninitialization warning in nilfs_btree_propagate_v()
nilfs2: fix a wrong type conversion in nilfs_ioctl()
`make CONFIG_NILFS2_FS=m M=fs/nilfs2/` will give the following warnings:
fs/nilfs2/btree.c: In function 'nilfs_btree_propagate':
fs/nilfs2/btree.c:1882: warning: 'maxlevel' may be used uninitialized in this function
fs/nilfs2/btree.c:1882: note: 'maxlevel' was declared here
Set maxlevel = 0 to fix it.
Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
(void * __user *) should be (void __user *)
Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
nilfs_wait_on_logs has a potential to slip out before completion of
all bio requests when it met an error. This synchronization fault may
cause unexpected results, for instance, violative access to freed
segment buffers from an end-bio callback routine.
This fixes the issue by ensuring that nilfs_wait_on_logs waits all
given logs.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
According to the report from Andreas Beckmann (Message-ID:
<4BA54677.3090902@abeckmann.de>), nilfs in 2.6.33 kernel got stuck
after a disk full error.
This turned out to be a regression by log writer updates merged at
kernel 2.6.33. nilfs_segctor_abort_construction, which is a cleanup
function for erroneous cases, was skipping writeback completion for
some logs.
This fixes the bug and would resolve the hang issue.
Reported-by: Andreas Beckmann <debian@abeckmann.de>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable <stable@kernel.org> [2.6.33.x]
Andreas Beckmann gave me a report that nilfs logged the following
warnings when it got a disk full:
nilfs_sufile_do_cancel_free: segment 0 must be clean
nilfs_sufile_do_cancel_free: segment 1 must be clean
These arise from a duplicate call to nilfs_segctor_cancel_freev in an
error path of log writer. This will fix the issue.
Reported-by: Andreas Beckmann <debian@abeckmann.de>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This kills the following checkpatch warnings:
WARNING: unnecessary whitespace before a quoted newline
#869: FILE: super.c:869:
+ "remount to a different snapshot. \n",
WARNING: unnecessary whitespace before a quoted newline
#389: FILE: the_nilfs.c:389:
+ printk(KERN_ERR "NILFS: too short segment. \n");
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This kills the following checkpatch warnings:
WARNING: please, no space before tabs
#74: FILE: segment.h:74:
+^Iunsigned ^I^Iflags;$
WARNING: please, no space before tabs
#35: FILE: segbuf.c:35:
+^Iint ^I^I^Istart, end; /* The region to be submitted */$
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Two segbuf functions, nilfs_segbuf_write and nilfs_segbuf_wait, are
declared with the static storage class specifier, but their
implementations are not.
This fixes the discrepancy.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (52 commits)
init: Open /dev/console from rootfs
mqueue: fix typo "failues" -> "failures"
mqueue: only set error codes if they are really necessary
mqueue: simplify do_open() error handling
mqueue: apply mathematics distributivity on mq_bytes calculation
mqueue: remove unneeded info->messages initialization
mqueue: fix mq_open() file descriptor leak on user-space processes
fix race in d_splice_alias()
set S_DEAD on unlink() and non-directory rename() victims
vfs: add NOFOLLOW flag to umount(2)
get rid of ->mnt_parent in tomoyo/realpath
hppfs can use existing proc_mnt, no need for do_kern_mount() in there
Mirror MS_KERNMOUNT in ->mnt_flags
get rid of useless vfsmount_lock use in put_mnt_ns()
Take vfsmount_lock to fs/internal.h
get rid of insanity with namespace roots in tomoyo
take check for new events in namespace (guts of mounts_poll()) to namespace.c
Don't mess with generic_permission() under ->d_lock in hpfs
sanitize const/signedness for udf
nilfs: sanitize const/signedness in dealing with ->d_name.name
...
Fix up fairly trivial (famous last words...) conflicts in
drivers/infiniband/core/uverbs_main.c and security/tomoyo/realpath.c
This adds reader's lock for the_nilfs->cno in nilfs_ioctl_sync,
for the_nilfs->cno should be proctected by segctor_sem when reading.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This is a trivial patch to remove unnecessary condition.
load_segment_summary() checks crc of segment_summary OR crc of whole
log data blocks based on boolean argument full_check. However,
callers of the function pass only 1 as full_check, which means only
whole log data blocks checking code is running all the time.
This patch deletes the condition and full_check argument and also
deletes enum 'NILFS_SEG_FAIL_CHECKSUM_SEGSUM' and corresponding case
clause, for it is nolonger used anymore.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This moves iterator to submit write requests for a series of logs into
segbuf.c, and hides nilfs_segbuf_write() and nilfs_segbuf_wait() in
the file.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This replaces s_dirt flag use in nilfs with a new flag added on the
nilfs object. The s_dirt flag was used to indicate if
sop->write_super() should be called, however the current version of
nilfs does not use the callback. Thus, it can be replaced with the
own flag.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Jiro SEKIBA <jir@unicus.jp>
This will clean up nilfs_segctor_req struct and the obscure request
argument passed among private methods of segment constructor.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This is a trivial patch to delete unnecessary condition in nilfs_dat_translate.
nilfs_dat_translate() will asign translated address to *blocknrp if blocknrp
is not NULL. However the condition is unneeded, because all callers of
nilfs_dat_translate() pass blocknrp properly.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
nilfs_error() calls nilfs_detach_segment_constructor() if
errors=remount-ro option is specified, and this may lead to a hang due
to recursive locking of, for instance, nilfs->ns_segctor_sem and
others.
In this case, detaching segment constructor is not necessary because
read-only flag is set to the filesystem and further writes are
blocked.
This fixes the potential hang issue by removing the
nilfs_detach_segment_constructor() call from nilfs_error.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
A few nilfs2 ioctls need to ask for and then later release write
access to the mount in order to avoid potential write to read-only
mounts.
This adds the missing mnt_want_write and mnt_drop_write in
nilfs_ioctl_change_cpmode, nilfs_ioctl_delete_checkpoint, and
nilfs_ioctl_clean_segments.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds a function to send discard requests for given array of
segment numbers, and calls the function when garbage collection
succeeded.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This fixes incorrect usage of nilfs_segctor_confirm() test function in
nilfs_segctor_destroy(); nilfs_segctor_confirm() returns zero if the
filesystem is not clean, so its use in nilfs_segctor_destroy() needs
inversion.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The C99 specification states in section 6.11.5:
The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This is a trivial style fix patch to mend errors/warnings
reported by "checkpatch.pl --file".
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This reverts commit e4c570c4cb, as
requested by Alexey:
"I think I gave a good enough arguments to not merge it.
To iterate:
* patch makes impossible to start using ext3 on EXT3_FS=n kernels
without reboot.
* this is done only for one pointer on task_struct"
None of config options which define task_struct are tristate directly
or effectively."
Requested-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
journal_info in task_struct is used in journaling file system only. So
introduce CONFIG_FS_JOURNAL_INFO and make it conditional.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This separates wait function for submitted logs from the write
function nilfs_segctor_write(). A new list of segment buffers
"sc_write_logs" is added to hold logs under writing, and double
buffering is partially applied to hide io latency.
At this point, the double buffering is disabled for blocksize <
pagesize because page dirty flag is turned off during write and dirty
buffers are not properly collected for pages crossing over segments.
To receive full benefit of the double buffering, further refinement is
needed to move the io wait outside the lock section of log writer.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds a few iterator functions for segment buffers to make it easy
to handle multiple series of logs.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Hides nilfs_write_info struct and nilfs_segbuf_prepare_write function
in segbuf.c to simplify the interface of nilfs_segbuf_write function.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This moves io status variables in nilfs_write_info struct to
nilfs_segment_buffer struct.
This is a preparation to hide nilfs_write_info in segment buffer code.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Previously, log writer had possibility to set an io error flag on
segments even in case of memory allocation failure.
This fixes the issue.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This applies list_splice_tail (or list_splice_tail_init) operation
instead of list_splice (or list_splice_init, respectively) to append a
new list to tail of an existing list.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Replace mark_inode_dirty() as nilfs_mark_inode_dirty()
to reduce deep function calls.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Delete mark_inode_dirty() in nilfs_delete_entry() to reduce duplicate
mark_inode_dirty() calls both in nilfs_rename() and nilfs_delete_entry().
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Delete mark_inode_dirty() in nilfs_commit_chunk(), for callers of
nilfs_commit_chunk() will call equivalent mark_inode_dirty()
after calling nilfs_commit_chunk().
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
change return type of nilfs_commit_chunk() as void from int,
for nilfs_set_file_dirty() usually does not return error.
This is an intermediate patch to reduce mark_inode_dirty() in
nilfs_commit_chunk().
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Split nilfs_unlink() to reduce nested transaction and duplicate
mark_inode_dirty() calls when calling nilfs_unlink() from nilfs_rmdir().
nilfs_do_unlink() is an actual unlink functionality which is not
in transaction and does not call mark_inode_dirty() for dentry argument.
nilfs_unlink() is a wrapper function for do_nilfs_unlink() with
transaction and mark_inode_dirty() for dentry argument.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This is an intermidiate patch to reduce redandunt mark_inode_dirty() calls
by calling inode_inc_link_count() and inode_dec_link_count() functions.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
It is redundant to call mark_inode_dirty() in nilfs_new_inode() because
all caller of nilfs_new_inode() will call mark_inode_dirty()
after calling nilfs_new_inode() directly or indirectly in transaction.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds "norecovery" mount option which disables temporal write
access to read-only mounts or snapshots during mount/recovery.
Without this option, write access will be even performed for those
types of mounts; the temporal write access is needed to mount root
file system read-only after an unclean shutdown.
This option will be helpful when user wants to prevent any write
access to the device.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Eric Sandeen <sandeen@redhat.com>
This adds a helper function, nilfs_valid_fs() which returns if nilfs
is in a valid state or not.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Although mount recovery of nilfs is integrated in load_nilfs()
procedure, the completion of recovery was isolated from the procedure
and performed at the end of the fill_super routine.
This was somewhat confusing since the recovery is needed for the nilfs
object, not for a super block instance.
To resolve the inconsistency, this will integrate the recovery
completion into load_nilfs().
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This inserts readahead in the recovery code. The readahead request is
issued per segment while searching the latest super root block.
This will shorten mount time after unclean unmount. A measurement
shows the recovery time was reduced by more than 60 percent:
e.g. real 0m11.586s -> 0m3.918s (x 2.96)
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This eliminates obsolete nilfs_get_sufile_get_segment_usage() and
nilfs_set_sufile_segment_usage() from sufile.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds nilfs_sufile_set_segment_usage() function in sufile to
replace direct access to the sufile metadata in log writer code.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds nilfs_sufile_mark_dirty() function in sufile to replace
nilfs_touch_segusage() function in log writer code. This is a
preparation for the further cleanup which will move out low level
sufile operations in the log writer.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This implements cache operation in get block routines of palloc code:
nilfs_palloc_get_desc_block(), nilfs_palloc_get_bitmap_block(), and
nilfs_palloc_get_entry_block().
This will complete the palloc cache.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds the palloc cache to ifile. The palloc cache is allocated on
the extended region of nilfs_mdt_info struct. The struct
nilfs_ifile_info defines the extended on memory structure of ifile.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Data pages in gcdat metadata file (i.e. the secondary DAT for GC), are
cleared or even moved back to the normal DAT when a shot of garbage
collection was done.
Buffer heads held by the palloc cache of gcdat must be cleared before
these page cache manipulation. This adds nilfs_palloc_clear_cache()
to ensure this.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds the palloc cache to DAT file. The palloc cache is allocated
on the extended region of nilfs_mdt_info struct. The struct
nilfs_dat_info defines the extended on memory structure of DAT.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds setup and cleanup routines of the persistent object
allocator cache.
According to ftrace analyses, accessing buffers of the DAT file
suffers indispensable overhead many times. To mitigate the overhead,
This introduce cache framework for the persistent object allocator
(palloc) which the DAT file and ifile are using.
struct nilfs_palloc_cache represents the cache object per metadata
file using palloc.
The cache is initialized through nilfs_palloc_setup_cache() and
destroyed by nilfs_palloc_destroy_cache(); callers of the former
function will be added to individual allocators of DAT and ifile on
successive patches.
nilfs_palloc_destroy_cache() will be called from nilfs_mdt_destroy()
if the cache is attached to a metadata file. A companion function
nilfs_palloc_clear_cache() is provided to allow releasing buffer head
references independently with the cleanup task. This adjunctive
function will be used before invalidating pages of metadata file with
the cache.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This expands a trivial address calculation in the function into its
every callsite. This expansion improves readability of the callers.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This removes the obsolete nilfs_btnode_get() function and makes
nilfs_btree_get_block() directly call nilfs_btnode_submit_block().
This expansion will provide better opportunity for code optimization.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This removes the obsolete argument from nilfs_btnode_submit_block().
This will complete separating a create function of btree node.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This displaces nilfs_btnode_get() use to create new btree node block
with nilfs_btnode_create_block.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Adds a separate routine for creating a btree node block. This is a
preparation to reduce the depth of function calls during submitting
btree node buffer.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This turns off readhead action of metadata file if nilfs_mdt_get_block
function was called with a create flag.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Previously, this function took an status code to return possible error
codes. The ("nilfs2: add local variable to cache the number of clean
segments") patch removed the possibility to return errors.
So, this simplifies the function definition to make it directly return
the number of clean segments.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This will hide a function call of nilfs_mdt_clear() in
nilfs_mdt_destroy().
This ensures nilfs_mdt_destroy() to do cleanup jobs included in
nilfs_mdt_clear().
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Will displace nilfs_mdt_read_inode_direct function with an individual
read method: nilfs_dat_read, nilfs_sufile_read, nilfs_cpfile_read.
This provides the opportunity to initialize local variables of each
metadata file after reading the inode.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This will displace nilfs_mdt_new() constructor with individual
metadata file constructors like nilfs_dat_new(), new_sufile_new(),
nilfs_cpfile_new(), and nilfs_ifile_new().
This makes it possible for each metadata file to have own
intialization code.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds an optional "object size" argument to nilfs_mdt_new_common()
function; the argument specifies the size of private object attached
to a newly allocated metadata file inode.
This will afford space to keep local variables for meta data files.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Previously, nilfs_bmap_add_blocks() and nilfs_bmap_sub_blocks() called
mark_inode_dirty() after they changed the number of data blocks.
This moves these calls outside bmap outermost functions like
nilfs_bmap_insert() or nilfs_bmap_truncate().
This will mitigate overhead for truncate or delete operation since
they repeatedly remove set of blocks. Nearly 10 percent improvement
was observed for removal of a large file:
# dd if=/dev/zero of=/test/aaa bs=1M count=512
# time rm /test/aaa
real 2.968s -> 2.705s
Further optimization may be possible by eliminating these
mark_inode_dirty() uses though I avoid mixing separate changes here.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Since metadata file routines mark the inode dirty after they
successfully changed bmap objects, nilfs_mdt_mark_dirty() calls in
nilfs_bmap_add_blocks() and nilfs_bmap_sub_blocks() are redundant.
This removes these overlapping calls from the bmap routines.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
lock_buffer() and unlock_buffer() uses in btree.c are eliminable
because btree functions gain buffer heads through nilfs_btnode_get(),
which never returns an on-the-fly buffer.
Although nilfs_clear_dirty_page() and nilfs_copy_back_pages() in
nilfs_commit_gcdat_inode() juggle btree node buffers of DAT, this is
safe because these operations are protected by a log writer lock or
the metadata file semaphore of DAT.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This lock is eliminable because inodes on the buffer can be updated
independently. Although a log writer also fills in bmap data on the
on-disk inodes, this update is exclusively done by a log writer lock.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Since most of fs using nofoobar style option,
modified barrier=off option as nobarrier.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This is a trivial patch to expose struct nilfs_fs_btree_node.
The struct should be exposed outside of kernel, for it is disk format.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The current btree lookup routines make a kernel oops when detected
inconsistency in btree blocks. These routines should instead return a
proper error code because the inconsistency usually comes from
corruption of on-disk metadata.
This fixes the issue by converting BUG_ON calls to proper error
handlings.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The comment says, "Caller of this function MUST lock s_inode_lock",
however just above the comment, it locks s_inode_lock in the function.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This fixes an -rc1 regression brought by the commit:
1cf58fa840 ("nilfs2: shorten freeze
period due to GC in write operation v3").
Although the patch moved out a function call of
nilfs_ioctl_move_blocks() to nilfs_ioctl_clean_segments() from
nilfs_ioctl_prepare_clean_segments(), it didn't move corresponding
cleanup job needed for the error case.
This will move the missing cleanup job to the destination function.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Jiro SEKIBA <jir@unicus.jp>
This fixes a kernel oops reported by Markus Trippelsdorf in the email
titled "[NILFS users] kernel Oops while running nilfs_cleanerd".
The oops was caused by a bug of error path in
nilfs_ioctl_move_blocks() function, which was inlined in
nilfs_ioctl_clean_segments().
nilfs_ioctl_move_blocks checks duplication of blocks which will be
moved in garbage collection. But, the check should have be done
within nilfs_ioctl_move_inode_block() to prevent list corruption among
buffers storing the target blocks.
To fix the kernel oops, this moves forward the duplication check
before the list insertion.
I also tested this for stable trees [2.6.30, 2.6.31].
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable <stable@kernel.org>
Adds missing initialization of newly allocated b-tree node buffers.
This avoids garbage data to be mixed in b-tree node blocks.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
When nilfs flushes out dirty data to reduce memory pressure, creation
of checkpoints is wrongly postponed. This bug causes irregular
checkpoint creation especially in small footprint systems.
To correct this issue, a timer for the checkpoint creation has to be
continued if a log writer does not create a checkpoint.
This will do the correction.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Bruno Prémont and Dunphy, Bill noticed me that NILFS will certainly
hang on ARM-based targets.
I found this was caused by an underflow of dirty pages counter. A
b-tree cache routine was marking page dirty without adjusting page
account information.
This fixes the dirty page accounting leak and resolves the hang on
arm-based targets.
Reported-by: Bruno Prémont <bonbons@linux-vserver.org>
Reported-by: Dunphy, Bill <WDunphy@tandbergdata.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Bruno Prémont <bonbons@linux-vserver.org>
Cc: stable <stable@kernel.org>
The i_dir_start_lookup field in nilfs_inode_info objects should be
cleared when the objects are allocated, but the the initialization was
missing in case of reading from disk. This adds the initialization.
Since the variable just gives a start page on directory lookups, the
bug was nonfatal until now.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This will fix file system corruption which infrequently happens after
mount. The problem was reported from users with the title "[NILFS
users] Fail to mount NILFS." (Message-ID:
<200908211918.34720.yuri@itinteg.net>), and so forth. I've also
experienced the corruption multiple times on kernel 2.6.30 and 2.6.31.
The problem turned out to be caused due to discordance between
mapping->nrpages of a btree node cache and the actual number of pages
hung on the cache; if the mapping->nrpages becomes zero even as it has
pages, truncate_inode_pages() returns without doing anything. Usually
this is harmless except it may cause page leak, but garbage collection
fairly infrequently sees a stale page remained in the btree node cache
of DAT (i.e. disk address translation file of nilfs), and induces the
corruption.
I identified a missing initialization in btree node caches was the
root cause. This corrects the bug.
I've tested this for kernel 2.6.30 and 2.6.31.
Reported-by: Yuri Chislov <yuri@itinteg.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable <stable@kernel.org>
* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code
But leave TTM code alone, something is fishy there with global vm_ops
being used.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It has been unused since it was introduced in:
commit 520808bf20e90fdbdb320264ba7dd5cf9d47dcac
Author: Andrew Morton <akpm@osdl.org>
Date: Fri May 21 00:46:17 2004 -0700
[PATCH] block device layer: separate backing_dev_info infrastructure
So lets just kill it.
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Some people asked me questions like the following:
On Wed, 15 Jul 2009 13:11:21 +0200, Leon Woestenberg wrote:
> just wondering, any reasons why NILFS2 is one of the miscellaneous
> filesystems and, for example, btrfs, is not in Kconfig?
Actually, nilfs is NOT a filesystem came from other operating systems,
but a filesystem created purely for Linux. Nor is it a flash
filesystem but that for generic block devices.
So, this moves nilfs outside the misc category as I responded in LKML
"Re: Why does NILFS2 hide under Miscellaneous filesystems?"
(Message-Id: <20090716.002526.93465395.ryusuke@osrg.net>).
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The nilfs_bmap_lookup() is now a wrapper function of
nilfs_bmap_lookup_at_level().
This moves the nilfs_bmap_lookup() to a header file converting it to
an inline function and gives an opportunity for optimization.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The current btree code is written so that btree functions call dat
operations via wrapper functions in bmap.c when they allocate, free,
or modify virtual block addresses.
This abstraction requires additional function calls and causes
frequent call of nilfs_bmap_get_dat() function since it is used in the
every wrapper function.
This removes the wrapper functions and makes them available from
btree.c and direct.c, which will increase the opportunity of
compiler optimization.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This is a preparation for the successive cleanup ("nilfs2: allow btree
to directly call dat operations").
This adds functions bundling a few operations to change an entry of
virtual block address on the dat file.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This gets rid of NILFS_CPFILE_GFP, NILFS_SUFILE_GFP, NILFS_DAT_GFP,
and NILFS_IFILE_GFP. All of these constants refer to NILFS_MDT_GFP,
and can be removed.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The btree path object is cleared just before it is freed.
This will remove the code doing the unnecessary clear operation.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Even though many btree functions take a btree object as their first
argument, most of them are not used in their functions.
This sticky use of the btree argument is hurting code readability and
giving the possibility of inefficient code generation.
So, this removes the unnecessary btree arguments.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This is a re-revised patch to shorten freeze period.
This version include a fix of the bug Konishi-san mentioned last time.
When GC is runnning, GC moves live block to difference segments.
Copying live blocks into memory is done in a transaction,
however it is not necessarily to be in the transaction.
This patch will get the nilfs_ioctl_move_blocks() out from
transaction lock and put it before the transaction.
I ran sysbench fileio test against nilfs partition.
I copied some DVD/CD images and created snapshot to create live blocks
before starting the benchmark.
Followings are summary of rc8 and rc8 w/ the patch of per-request
statistics, which is min/max and avg. I ran each test three times and
bellow is average of those numers.
According to this benchmark result, average time is slightly degrated.
However, worstcase (max) result is significantly improved.
This can address a few seconds write freeze.
- random write per-request performance of rc8
min 0.843ms
max 680.406ms
avg 3.050ms
- random write per-request performance of rc8 w/ this patch
min 0.843ms -> 100.00%
max 380.490ms -> 55.90%
avg 3.233ms -> 106.00%
- sequential write per-request performance of rc8
min 0.736ms
max 774.343ms
avg 2.883ms
- sequential write per-request performance of rc8 w/ this patch
min 0.720ms -> 97.80%
max 644.280ms-> 83.20%
avg 3.130ms -> 108.50%
-----8<-----8<-----nilfs_cleanerd.conf-----8<-----8<-----
protection_period 150
selection_policy timestamp # timestamp in ascend order
nsegments_per_clean 2
cleaning_interval 2
retry_interval 60
use_mmap
log_priority info
-----8<-----8<-----nilfs_cleanerd.conf-----8<-----8<-----
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
nilfs2: Add more safeguard routines and protections in mount process,
which also makes nilfs2 report consistency error messages when
checkpoint number is invalid.
Signed-off-by: Zhu Yanhai <zhu.yanhai@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
nilfs2: In procedure 'nilfs_get_sb()', when a nilfs filesysttem is
mounted for the first time, local variable 'nilfs->ns_last_cno' is
used before loading the latest checkpoint number from disk (in
'nilfs_fill_super'). 'nilfs->ns_last_cno' is assigned to 'sd.cno', but
'sd.cno' has never been used in the procedure.
Signed-off-by: Zhang Qiang <zhangqiang.buaa@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Alberto Bertogli advised me about bio_alloc() use in nilfs:
On Sat, 13 Jun 2009 22:52:40 -0300, Alberto Bertogli wrote:
> By the way, those bio_alloc()s are using GFP_NOWAIT but it looks
> like they could use at least GFP_NOIO or GFP_NOFS, since the caller
> can (and sometimes do) sleep. The only caller is nilfs_submit_bh(),
> which calls nilfs_submit_seg_bio() which can sleep calling
> wait_for_completion().
This takes in the comment and replaces the use of GFP_NOWAIT flag with
GFP_NOIO.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This removes nilfs_write_super and commit super block in nilfs
internal thread, instead of periodic write_super callback.
VFS layer calls ->write_super callback periodically. However,
it looks like that calling back is ommited when disk I/O is busy.
And when cleanerd (nilfs GC) is runnig, disk I/O tend to be busy thus
nilfs superblock is not synchronized as nilfs designed.
To avoid it, syncing superblock by nilfs thread instead of pdflush.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Separate conditions that check if syncing super block and alternative
super block are required as inline functions to reuse the conditions.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This fixes disorder of nilfs_write_super in nilfs_sync_fs. Commiting
super block must be the end of the function so that every changes are
reflected.
->sync_fs() is not called frequently so this makes nilfs_sync_fs call
nilfs_commit_super instead of nilfs_write_super.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This removes redundant super block commit.
nilfs_write_super will call nilfs_commit_super to store super block
into block device. However, nilfs_put_super will call
nilfs_commit_super right after calling nilfs_write_super. So calling
nilfs_write_super in nilfs_put_super would be redundant.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This is a patch to display mount options in procfs.
Mount options will show up in the /proc/mounts as other fs does.
...
/dev/sda6 /mnt nilfs2 ro,relatime,barrier=off,cp=3,order=strict 0 0
...
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The current metadata file code skips disk address lookup for its data
block if the buffer has a mapped flag.
This has a potential risk to cause read request to be performed
against the stale block address that GC moved, and it may lead to meta
data corruption. The mapped flag is safe if the buffer has an
uptodate flag, otherwise it may prevent necessary update of disk
address in the next read.
This will avoid the potential problem by ensuring disk address lookup
before reading metadata block even for buffers with the mapped flag.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
will get rid of nilfs_get_writer() and nilfs_put_writer() pair used to
retain a writable FS-instance for a period.
The pair functions were making up some kind of recursive lock with a
mutex, but they became overkill since the commit
201913ed74. Furthermore, they caused
the following lockdep warning because the mutex can be released by a
task which didn't lock it:
=====================================
[ BUG: bad unlock balance detected! ]
-------------------------------------
kswapd0/422 is trying to release lock (&nilfs->ns_writer_mutex) at:
[<c1359ff5>] mutex_unlock+0x8/0xa
but there are no more locks to release!
other info that might help us debug this:
no locks held by kswapd0/422.
stack backtrace:
Pid: 422, comm: kswapd0 Not tainted 2.6.31-rc4-nilfs #51
Call Trace:
[<c1358f97>] ? printk+0xf/0x18
[<c104fea7>] print_unlock_inbalance_bug+0xcc/0xd7
[<c11578de>] ? prop_put_global+0x3/0x35
[<c1050195>] lock_release+0xed/0x1dc
[<c1359ff5>] ? mutex_unlock+0x8/0xa
[<c1359f83>] __mutex_unlock_slowpath+0xaf/0x119
[<c1359ff5>] mutex_unlock+0x8/0xa
[<d1284add>] nilfs_mdt_write_page+0xd8/0xe1 [nilfs2]
[<c1092653>] shrink_page_list+0x379/0x68d
[<c109171b>] ? isolate_pages_global+0xb4/0x18c
[<c1092bd2>] shrink_list+0x26b/0x54b
[<c10930be>] shrink_zone+0x20c/0x2a2
[<c10936b7>] kswapd+0x407/0x591
[<c1091667>] ? isolate_pages_global+0x0/0x18c
[<c1040603>] ? autoremove_wake_function+0x0/0x33
[<c10932b0>] ? kswapd+0x0/0x591
[<c104033b>] kthread+0x69/0x6e
[<c10402d2>] ? kthread+0x0/0x6e
[<c1003e33>] kernel_thread_helper+0x7/0x1a
This patch uses a reader/writer semaphore instead of the own lock and
kills this warning.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Unlike on most other architectures ino_t is an unsigned int on s390.
So add an explicit cast to avoid this compile warning:
fs/nilfs2/recovery.c: In function 'recover_dsync_blocks':
fs/nilfs2/recovery.c:555: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t'
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The __nilfs_read_inode function is ignoring the error code returned
from nilfs_read_inode_common(), and wrongly delivers a success code
(zero) when it escapes from the function in erroneous cases.
This adds the missing error handling.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
will fix kernel oopses like the following:
# mount -t nilfs2 -r -o cp=20 /dev/sdb1 /test1
# mount -t nilfs2 -r -o cp=20 /dev/sdb1 /test2
# umount /test1
# umount /test2
BUG: sleeping function called from invalid context at arch/x86/mm/fault.c:1069
in_atomic(): 0, irqs_disabled(): 1, pid: 3886, name: umount.nilfs2
1 lock held by umount.nilfs2/3886:
#0: (&type->s_umount_key#31){+.+...}, at: [<c10b398a>] deactivate_super+0x52/0x6c
irq event stamp: 1219
hardirqs last enabled at (1219): [<c135c774>] __mutex_unlock_slowpath+0xf8/0x119
hardirqs last disabled at (1218): [<c135c6d5>] __mutex_unlock_slowpath+0x59/0x119
softirqs last enabled at (1214): [<c1033316>] __do_softirq+0x1a5/0x1ad
softirqs last disabled at (1205): [<c1033354>] do_softirq+0x36/0x5a
Pid: 3886, comm: umount.nilfs2 Not tainted 2.6.31-rc6 #55
Call Trace:
[<c1023549>] __might_sleep+0x107/0x10e
[<c13603c0>] do_page_fault+0x246/0x397
[<c136017a>] ? do_page_fault+0x0/0x397
[<c135e753>] error_code+0x6b/0x70
[<c136017a>] ? do_page_fault+0x0/0x397
[<c104f805>] ? __lock_acquire+0x91/0x12fd
[<c1050a62>] ? __lock_acquire+0x12ee/0x12fd
[<c1050a62>] ? __lock_acquire+0x12ee/0x12fd
[<c1050b2b>] lock_acquire+0xba/0xdd
[<d0d17d3f>] ? nilfs_detach_segment_constructor+0x2f/0x2fa [nilfs2]
[<c135d4fe>] down_write+0x2a/0x46
[<d0d17d3f>] ? nilfs_detach_segment_constructor+0x2f/0x2fa [nilfs2]
[<d0d17d3f>] nilfs_detach_segment_constructor+0x2f/0x2fa [nilfs2]
[<c104ea2c>] ? mark_held_locks+0x43/0x5b
[<c104ecb1>] ? trace_hardirqs_on_caller+0x10b/0x133
[<c104ece4>] ? trace_hardirqs_on+0xb/0xd
[<d0d09ac1>] nilfs_put_super+0x2f/0xca [nilfs2]
[<c10b3352>] generic_shutdown_super+0x49/0xb8
[<c10b33de>] kill_block_super+0x1d/0x31
[<c10e6599>] ? vfs_quota_off+0x0/0x12
[<c10b398f>] deactivate_super+0x57/0x6c
[<c10c4bc3>] mntput_no_expire+0x8c/0xb4
[<c10c5094>] sys_umount+0x27f/0x2a4
[<c10c50c6>] sys_oldumount+0xd/0xf
[<c10031a4>] sysenter_do_call+0x12/0x38
...
This turns out to be a bug brought by an -rc1 patch ("nilfs2: simplify
remaining sget() use").
In the patch, a new "put resource" function, nilfs_put_sbinfo()
was introduced to delay freeing nilfs_sb_info struct.
But the nilfs_put_sbinfo() mistakenly used atomic_dec_and_test()
function to check the reference count, and it caused the nilfs_sb_info
was freed when user mounted a snapshot twice.
This bug also suggests there was unseen memory leak in usual mount
/umount operations for nilfs.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
'ns_cno' of structure 'the_nilfs' must be protected from segment
writer, in other words, the caller of nilfs_get_checkpoint should hold
read lock for nilfs->ns_segctor_sem. This patch adds the lock/unlock
operations in nilfs_attach_checkpoint() when calling
nilfs_cpfile_get_checkpoint().
Signed-off-by: Zhang Qiang <zhangqiang.buaa@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds a missing unlock of nilfs->ns_writer_mutex in
nilfs_mdt_write_page() function.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Andrea Gelmini gave me a report that a kernel oops hit on a nilfs
filesystem with a 1KB block size when doing rsync.
This turned out to be caused by an inconsistency of dirty state
between a page and its buffers storing b-tree node blocks.
If the page had multiple buffers split over multiple logs, and if the
logs were written at a time, a dirty flag remained in the page even
every dirty flag in the buffers was cleared.
This will fix the failure by dropping the dirty flag properly for
pages with the discrete multiple b-tree nodes.
Reported-by: Andrea Gelmini <andrea.gelmini@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Andrea Gelmini <andrea.gelmini@gmail.com>
Cc: stable@kernel.org
fs/Kconfig file was split into individual fs/*/Kconfig files before
nilfs was merged. I've found the current config entry of nilfs is
tainting the work. Sorry, I didn't notice. This fixes the violation.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT
This will make hardirq.h inclusion cheaper for every PREEMPT=n config
(which includes allmodconfig/allyesconfig, BTW)
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes a bug that checkpoint count gets wrong on errors when
deleting a series of checkpoints.
The count error is persistent since the checkpoint count is stored on
disk. Some userland programs refer to the count via ioctl, and this
bugfix is needed to prevent malfunction of such programs.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable@kernel.org
This will fix the following false positive of recursive locking which
lockdep has detected:
=============================================
[ INFO: possible recursive locking detected ]
2.6.30-nilfs #42
---------------------------------------------
nilfs_cleanerd/10607 is trying to acquire lock:
(&bmap->b_sem){++++-.}, at: [<e0d025b7>] nilfs_bmap_lookup_at_level+0x1a/0x74 [nilfs2]
but task is already holding lock:
(&bmap->b_sem){++++-.}, at: [<e0d024e0>] nilfs_bmap_truncate+0x19/0x6a [nilfs2]
other info that might help us debug this:
2 locks held by nilfs_cleanerd/10607:
#0: (&nilfs->ns_segctor_sem){++++.+}, at: [<e0d0d75a>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]
#1: (&bmap->b_sem){++++-.}, at: [<e0d024e0>] nilfs_bmap_truncate+0x19/0x6a [nilfs2]
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Leandro Lucarella gave me a report that nilfs gets stuck after its
write function fails.
The problem turned out to be caused by bugs which leave writeback flag
on pages. This fixes the problem by ensuring to clear the writeback
flag in error path.
Reported-by: Leandro Lucarella <llucax@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable@kernel.org
The following error code handling in nilfs_segctor_write() function
wrongly converted negative error codes to a truth value (i.e. 1):
err = unlikely(err) ? : res;
which originaly meant to be
err = err ? : res;
This mis-conversion caused that write or sync functions receive the
unexpected error code. This fixes the bug by removing the unlikely
directive.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable@kernel.org
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (22 commits)
nilfs2: support contiguous lookup of blocks
nilfs2: add sync_page method to page caches of meta data
nilfs2: use device's backing_dev_info for btree node caches
nilfs2: return EBUSY against delete request on snapshot
nilfs2: modify list of unsupported features in caveats
nilfs2: enable sync_page method
nilfs2: set bio unplug flag for the last bio in segment
nilfs2: allow future expansion of metadata read out via get info ioctl
NILFS2: Pagecache usage optimization on NILFS2
nilfs2: remove nilfs_btree_operations from btree mapping
nilfs2: remove nilfs_direct_operations from direct mapping
nilfs2: remove bmap pointer operations
nilfs2: remove useless b_low and b_high fields from nilfs_bmap struct
nilfs2: remove pointless NULL check of bpop_commit_alloc_ptr function
nilfs2: move get block functions in bmap.c into btree codes
nilfs2: remove nilfs_bmap_delete_block
nilfs2: remove nilfs_bmap_put_block
nilfs2: remove header file for segment list operations
nilfs2: eliminate removal list of segments
nilfs2: add sufile function that can modify multiple segment usages
...
This will remove every bd_mount_sem use in nilfs.
The intended exclusion control was replaced by the previous patch
("nilfs2: correct exclusion control in nilfs_remount function") for
nilfs_remount(), and this patch will replace remains with a new mutex
that this inserts in nilfs object.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
nilfs_remount() changes mount state of a superblock instance. Even
though nilfs accesses other superblock instances during mount or
remount, the mount state was not properly protected in
nilfs_remount().
Moreover, nilfs_remount() has a lock order reversal problem;
nilfs_get_sb() holds:
1. bdev->bd_mount_sem
2. sb->s_umount (sget acquires)
and nilfs_remount() holds:
1. sb->s_umount (locked by the caller in vfs)
2. bdev->bd_mount_sem
To avoid these problems, this patch divides a semaphore protecting
super block instances from nilfs->ns_sem, and applies it to the mount
state protection in nilfs_remount().
With this change, bd_mount_sem use is removed from nilfs_remount() and
the lock order reversal will be resolved. And the new rw-semaphore,
nilfs->ns_super_sem will properly protect the mount state except the
modification from nilfs_error function.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This simplifies the test function passed on the remaining sget()
callsite in nilfs.
Instead of checking mount type (i.e. ro-mount/rw-mount/snapshot mount)
in the test function passed to sget(), this patch first looks up the
nilfs_sb_info struct which the given mount type matches, and then
acquires the super block instance holding the nilfs_sb_info.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This stops using sget() for checking if an r/w-mount or an r/o-mount
exists on the device. This elimination uses a back pointer to the
current mount added to nilfs object.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This will change the way to obtain nilfs object in nilfs_get_sb()
function.
Previously, a preliminary sget() call was performed, and the nilfs
object was acquired from a super block instance found by the sget()
call.
This patch, instead, instroduces a new dedicated function
find_or_create_nilfs(); as the name implies, the function finds an
existent nilfs object from a global list or creates a new one if no
object is found on the device.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The following EBUSY case in nilfs_get_sb() is meaningless. Indeed,
this error code is never returned to the caller.
if (!s->s_root) {
...
} else if (!(s->s_flags & MS_RDONLY)) {
err = -EBUSY;
}
This simply removes the else case.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The call to ->write_super from __sync_filesystem will go away, so make
sure nilfs2 performs the same actions from inside ->sync_fs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move BKL into ->put_super from the only caller. A couple of
filesystems had trivial enough ->put_super (only kfree and NULLing of
s_fs_info + stuff in there) to not get any locking: coda, cramfs, efs,
hugetlbfs, omfs, qnx4, shmem, all others got the full treatment. Most
of them probably don't need it, but I'd rather sort that out individually.
Preferably after all the other BKL pushdowns in that area.
[AV: original used to move lock_super() down as well; these changes are
removed since we don't do lock_super() at all in generic_shutdown_super()
now]
[AV: fuse, btrfs and xfs are known to need no damn BKL, exempt]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We just did a full fs writeout using sync_filesystem before, and if
that's not enough for the filesystem it can perform it's own writeout
in ->put_super, which many filesystems already do.
Move a call to foofs_write_super into every foofs_put_super for now to
guarantee identical behaviour until it's cleaned up by the individual
filesystem maintainers.
Exceptions:
- affs already has identical copy & pasted code at the beginning of
affs_put_super so no need to do it twice.
- xfs does the right thing without it and I have changes pending for
the xfs tree touching this are so I don't really need conflicts
here..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits)
block: add request clone interface (v2)
floppy: fix hibernation
ramdisk: remove long-deprecated "ramdisk=" boot-time parameter
fs/bio.c: add missing __user annotation
block: prevent possible io_context->refcount overflow
Add serial number support for virtio_blk, V4a
block: Add missing bounce_pfn stacking and fix comments
Revert "block: Fix bounce limit setting in DM"
cciss: decode unit attention in SCSI error handling code
cciss: Remove no longer needed sendcmd reject processing code
cciss: change SCSI error handling routines to work with interrupts enabled.
cciss: separate error processing and command retrying code in sendcmd_withirq_core()
cciss: factor out fix target status processing code from sendcmd functions
cciss: simplify interface of sendcmd() and sendcmd_withirq()
cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code
cciss: Use schedule_timeout_uninterruptible in SCSI error handling code
block: needs to set the residual length of a bidi request
Revert "block: implement blkdev_readpages"
block: Fix bounce limit setting in DM
Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt
...
Manually fix conflicts with tracing updates in:
block/blk-sysfs.c
drivers/ide/ide-atapi.c
drivers/ide/ide-cd.c
drivers/ide/ide-floppy.c
drivers/ide/ide-tape.c
include/trace/events/block.h
kernel/trace/blktrace.c
Although get_block() callback function can return extent of contiguous
blocks with bh->b_size, nilfs_get_block() function did not support
this feature.
This adds contiguous lookup feature to the block mapping codes of
nilfs, and allows the nilfs_get_blocks() function to return the extent
information by applying the feature.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This applies block_sync_page() function to the sync_page method of
page caches for meta data files, gc page caches, and btree node
buffers. This is a companion patch of ("nilfs2: enable sync_page
mothod") which applied the function for data pages.
This allows lock_page() for those meta data to unplug pending bio
requests.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Previously, default_backing_dev_info was used for the mapping of btree
node caches. This uses device dependent backing_dev_info to allow
detailed control of the device for the btree node pages.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This helps userland programs like the rmcp command to distinguish
error codes returned against a checkpoint removal request.
Previously -EPERM was returned, and not discriminable from real
permission errors. This also allows removal of the latest checkpoint
because the deletion leads to create a new checkpoint, and thus it's
harmless for the filesystem.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds a missing sync_page method which unplugs bio requests when
waiting for page locks. This will improve read performance of nilfs.
Here is a measurement result using dd command.
Without this patch:
# mount -t nilfs2 /dev/sde1 /test
# dd if=/test/aaa of=/dev/null bs=512k
1024+0 records in
1024+0 records out
536870912 bytes (537 MB) copied, 6.00688 seconds, 89.4 MB/s
With this patch:
# mount -t nilfs2 /dev/sde1 /test
# dd if=/test/aaa of=/dev/null bs=512k
1024+0 records in
1024+0 records out
536870912 bytes (537 MB) copied, 3.54998 seconds, 151 MB/s
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This sets BIO_RW_UNPLUG flag on the last bio of each segment during
write. The last bio should be unplugged immediately because the
caller waits for the completion after the submission.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Nilfs has some ioctl commands to read out metadata from meta data
files:
- NILFS_IOCTL_GET_CPINFO for checkpoint file,
- NILFS_IOCTL_GET_SUINFO for segment usage file, and
- NILFS_IOCTL_GET_VINFO for Disk Address Transalation (DAT) file,
respectively.
Every routine on these metadata files is implemented so that it allows
future expansion of on-disk format. But, the above ioctl commands do
not support expansion even though nilfs_argv structure can handle
arbitrary size for data exchanged via ioctl.
This allows future expansion of the following structures which give
basic format of the "get information" ioctls:
- struct nilfs_cpinfo
- struct nilfs_suinfo
- struct nilfs_vinfo
So, this introduces forward compatility of such ioctl commands.
In this patch, a sanity check in nilfs_ioctl_get_info() function is
changed to accept larger data structure [1], and metadata read
routines are rewritten so that they become compatible for larger
structures; the routines will just ignore the remaining fields which
the current version of nilfs doesn't know.
[1] The ioctl function already has another upper limit (PAGE_SIZE
against a structure, which appears in nilfs_ioctl_wrap_copy
function), and this will not cause security problem.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Hi,
I introduced "is_partially_uptodate" aops for NILFS2.
A page can have multiple buffers and even if a page is not uptodate, some buffers
can be uptodate on pagesize != blocksize environment.
This aops checks that all buffers which correspond to a part of a file
that we want to read are uptodate. If so, we do not have to issue actual
read IO to HDD even if a page is not uptodate because the portion we
want to read are uptodate.
"block_is_partially_uptodate" function is already used by ext2/3/4.
With the following patch random read/write mixed workloads or random read after
random write workloads can be optimized and we can get performance improvement.
I did a performance test using the sysbench.
1 --file-block-size=8K --file-total-size=2G --file-test-mode=rndrw --file-fsync-freq=0 --fil
e-rw-ratio=1 run
-2.6.30-rc5
Test execution summary:
total time: 151.2907s
total number of events: 200000
total time taken by event execution: 2409.8387
per-request statistics:
min: 0.0000s
avg: 0.0120s
max: 0.9306s
approx. 95 percentile: 0.0439s
Threads fairness:
events (avg/stddev): 12500.0000/238.52
execution time (avg/stddev): 150.6149/0.01
-2.6.30-rc5-patched
Test execution summary:
total time: 140.8828s
total number of events: 200000
total time taken by event execution: 2240.8577
per-request statistics:
min: 0.0000s
avg: 0.0112s
max: 0.8750s
approx. 95 percentile: 0.0418s
Threads fairness:
events (avg/stddev): 12500.0000/218.43
execution time (avg/stddev): 140.0536/0.01
arch: ia64
pagesize: 16k
Thanks.
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Previously, the bmap codes of nilfs used three types of function
tables. The abuse of indirect function calls decreased source
readability and suffered many indirect jumps which would confuse
branch prediction of processors.
This eliminates one type of the function tables,
nilfs_bmap_ptr_operations, which was used to dispatch low level
pointer operations of the nilfs bmap.
This adds a new integer variable "b_ptr_type" to nilfs_bmap struct,
and uses the value to select the pointer operations.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This will cut off 16 bytes from the nilfs_bmap struct which is
embedded in the on-memory inode of nilfs.
The b_high field was never used, and the b_low field stores a constant
value which can be determined by whether the inode uses btree for
block mapping or not.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This indirect function is set to NULL only for gc cache inodes, but
the gc cache inodes never call this function.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Two get block function for btree nodes, nilfs_bmap_get_block() and
nilfs_bmap_get_new_block(), are called only from the btree codes.
This relocation will increase opportunities of compiler optimization.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
nilfs_bmap_delete_block() is a wrapper function calling
nilfs_btnode_delete(). This removes it for simplicity.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
nilfs_bmap_put_block() is a wrapper function calling brelse(). This
eliminates the wrapper for simplicity.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This will eliminate obsolete list operations of nilfs_segment_entry
structure which has been used to handle mutiple segment numbers.
The patch ("nilfs2: remove list of freeing segments") removed use of
the structure from the segment constructor code, and this patch
simplifies the remaining code by integrating it into recovery.c.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This will clean up the removal list of segments and the related
functions from segment.c and ioctl.c, which have hurt code
readability.
This elimination is applied by using nilfs_sufile_updatev() previously
introduced in the patch ("nilfs2: add sufile function that can modify
multiple segment usages").
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This is a preparation for the later cleanup patch ("nilfs2: remove
list of freeing segments").
This adds nilfs_sufile_updatev() to sufile, which can modify multiple
segment usages at a time.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This simplifies some low level functions of bmap.
Three bmap pointer operations, nilfs_bmap_start_v(),
nilfs_bmap_commit_v(), and nilfs_bmap_abort_v(), are unified into one
nilfs_bmap_start_v() function. And the related indirect function calls
are replaced with it.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The nilfs_cpfile_delete_checkpoints() wrongly skips brelse() for the
header block of checkpoint file in case of errors. This fixes the
leak bug.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Until now we have had a 1:1 mapping between storage device physical
block size and the logical block sized used when addressing the device.
With SATA 4KB drives coming out that will no longer be the case. The
sector size will be 4KB but the logical block size will remain
512-bytes. Hence we need to distinguish between the physical block size
and the logical ditto.
This patch renames hardsect_size to logical_block_size.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This fixes a new memory leak problem in garbage collection. The
problem was brought by the bugfix patch ("nilfs2: fix lock order
reversal in nilfs_clean_segments ioctl").
Thanks to Kentaro Suzuki for finding this problem.
Reported-by: Kentaro Suzuki <k_suzuki@ms.sylc.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Although some ioctls of nilfs2 exchange data in the form of indirectly
referenced array, some of them lack size check on the array elements.
This inserts the missing checks and rejects requests if data of ioctl
does not have a valid format.
We usually don't have to check size of structures that we associated
with ioctl commands because the size is tested implicitly for
identifying ioctl command; the checks this patch adds are for the
cases where the implicit check is not applied.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This is a companion patch to ("nilfs2: fix possible circular locking
for get information ioctls").
This corrects lock order reversal between mm->mmap_sem and
nilfs->ns_segctor_sem in nilfs_clean_segments() which was detected by
lockdep check:
=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.30-rc3-nilfs-00003-g360bdc1 #7
-------------------------------------------------------
mmap/5294 is trying to acquire lock:
(&nilfs->ns_segctor_sem){++++.+}, at: [<d0d0e846>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]
but task is already holding lock:
(&mm->mmap_sem){++++++}, at: [<c043700a>] do_page_fault+0x1d8/0x30a
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&mm->mmap_sem){++++++}:
[<c01470a5>] __lock_acquire+0x1066/0x13b0
[<c01474a9>] lock_acquire+0xba/0xdd
[<c01836bc>] might_fault+0x68/0x88
[<c023c61d>] copy_from_user+0x2a/0x111
[<d0d120d0>] nilfs_ioctl_prepare_clean_segments+0x1d/0xf1 [nilfs2]
[<d0d0e2aa>] nilfs_clean_segments+0x6d/0x1b9 [nilfs2]
[<d0d11f68>] nilfs_ioctl+0x2ad/0x318 [nilfs2]
[<c01a3be7>] vfs_ioctl+0x22/0x69
[<c01a408e>] do_vfs_ioctl+0x460/0x499
[<c01a4107>] sys_ioctl+0x40/0x5a
[<c01031a4>] sysenter_do_call+0x12/0x38
[<ffffffff>] 0xffffffff
-> #0 (&nilfs->ns_segctor_sem){++++.+}:
[<c0146e0b>] __lock_acquire+0xdcc/0x13b0
[<c01474a9>] lock_acquire+0xba/0xdd
[<c0433f1d>] down_read+0x2a/0x3e
[<d0d0e846>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]
[<d0cfe0e5>] nilfs_page_mkwrite+0xe7/0x154 [nilfs2]
[<c0183b0b>] __do_fault+0x165/0x376
[<c01855cd>] handle_mm_fault+0x287/0x5d1
[<c043712d>] do_page_fault+0x2fb/0x30a
[<c0435462>] error_code+0x72/0x78
[<ffffffff>] 0xffffffff
where nilfs_clean_segments() holds:
nilfs->ns_segctor_sem -> copy_from_user()
--> page fault -> mm->mmap_sem
And, page fault path may hold:
page fault -> mm->mmap_sem
--> nilfs_page_mkwrite() -> nilfs->ns_segctor_sem
Even though nilfs_clean_segments() does not perform write access on
given user pages, it may cause deadlock because nilfs->ns_segctor_sem
is shared per device and mm->mmap_sem can be shared with other tasks.
To avoid this problem, this patch moves all calls of copy_from_user()
outside the nilfs->ns_segctor_sem lock in the ioctl.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This is one of two patches which are to correct possible circular
locking between mm->mmap_sem and nilfs->ns_segctor_sem.
The problem was detected by lockdep check as follows:
=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.30-rc3-nilfs-00002-g3552613 #6
-------------------------------------------------------
mmap/5418 is trying to acquire lock:
(&nilfs->ns_segctor_sem){++++.+}, at: [<d0d0e852>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]
but task is already holding lock:
(&mm->mmap_sem){++++++}, at: [<c043700a>] do_page_fault+0x1d8/0x30a
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&mm->mmap_sem){++++++}:
[<c01470a5>] __lock_acquire+0x1066/0x13b0
[<c01474a9>] lock_acquire+0xba/0xdd
[<c01836bc>] might_fault+0x68/0x88
[<c023c730>] copy_to_user+0x2c/0xfc
[<d0d11b4f>] nilfs_ioctl_wrap_copy+0x103/0x160 [nilfs2]
[<d0d11fa9>] nilfs_ioctl+0x30a/0x3b0 [nilfs2]
[<c01a3be7>] vfs_ioctl+0x22/0x69
[<c01a408e>] do_vfs_ioctl+0x460/0x499
[<c01a4107>] sys_ioctl+0x40/0x5a
[<c01031a4>] sysenter_do_call+0x12/0x38
[<ffffffff>] 0xffffffff
-> #0 (&nilfs->ns_segctor_sem){++++.+}:
[<c0146e0b>] __lock_acquire+0xdcc/0x13b0
[<c01474a9>] lock_acquire+0xba/0xdd
[<c0433f1d>] down_read+0x2a/0x3e
[<d0d0e852>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]
[<d0cfe0e5>] nilfs_page_mkwrite+0xe7/0x154 [nilfs2]
[<c0183b0b>] __do_fault+0x165/0x376
[<c01855cd>] handle_mm_fault+0x287/0x5d1
[<c043712d>] do_page_fault+0x2fb/0x30a
[<c0435462>] error_code+0x72/0x78
[<ffffffff>] 0xffffffff
other info that might help us debug this:
1 lock held by mmap/5418:
#0: (&mm->mmap_sem){++++++}, at: [<c043700a>] do_page_fault+0x1d8/0x30a
stack backtrace:
Pid: 5418, comm: mmap Not tainted 2.6.30-rc3-nilfs-00002-g3552613 #6
Call Trace:
[<c0432145>] ? printk+0xf/0x12
[<c0145c48>] print_circular_bug_tail+0xaa/0xb5
[<c0146e0b>] __lock_acquire+0xdcc/0x13b0
[<d0d10149>] ? nilfs_sufile_get_stat+0x1e/0x105 [nilfs2]
[<c013b59a>] ? up_read+0x16/0x2c
[<d0d10225>] ? nilfs_sufile_get_stat+0xfa/0x105 [nilfs2]
[<c01474a9>] lock_acquire+0xba/0xdd
[<d0d0e852>] ? nilfs_transaction_begin+0xb6/0x10c [nilfs2]
[<c0433f1d>] down_read+0x2a/0x3e
[<d0d0e852>] ? nilfs_transaction_begin+0xb6/0x10c [nilfs2]
[<d0d0e852>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]
[<d0cfe0e5>] nilfs_page_mkwrite+0xe7/0x154 [nilfs2]
[<c0183b0b>] __do_fault+0x165/0x376
[<c01855cd>] handle_mm_fault+0x287/0x5d1
[<c043700a>] ? do_page_fault+0x1d8/0x30a
[<c013b54f>] ? down_read_trylock+0x39/0x43
[<c043712d>] do_page_fault+0x2fb/0x30a
[<c0436e32>] ? do_page_fault+0x0/0x30a
[<c0435462>] error_code+0x72/0x78
[<c0436e32>] ? do_page_fault+0x0/0x30a
This makes the lock granularity of nilfs->ns_segctor_sem finer than
that of the mmap semaphore for ioctl commands except
nilfs_clean_segments().
The successive patch ("nilfs2: fix lock order reversal in
nilfs_clean_segments ioctl") is required to fully resolve the problem.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This would fix the following failure during GC:
nilfs_cpfile_delete_checkpoints: cannot delete block
NILFS: GC failed during preparation: cannot delete checkpoints: err=-2
The problem was caused by a break in state consistency between page
cache and btree; the above block was removed from the btree but the
page buffering the block was remaining in the page cache in dirty
state.
This resolves the inconsistency by ensuring to clear dirty state of
the page buffering the deleted block.
Reported-by: David Arendt <admin@prnet.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This fixes the following circular locking dependency problem:
=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.30-rc3 #5
-------------------------------------------------------
segctord/3895 is trying to acquire lock:
(&nilfs->ns_writer_mutex){+.+...}, at: [<d0d02172>]
nilfs_mdt_get_block+0x89/0x20f [nilfs2]
but task is already holding lock:
(&bmap->b_sem){++++..}, at: [<d0d02d99>]
nilfs_bmap_propagate+0x14/0x2e [nilfs2]
which lock already depends on the new lock.
The bugfix is done by replacing call sites of nilfs_get_writer() which
are never called from read-only context with direct dereferencing of
pointer to a writable FS-instance.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Some function calls in nilfs_prepare_segment_for_recovery() may fail
because they can create blocks on meta data files without configuring
a writable FS-instance. Concretely, nilfs_mdt_create_block() routine
of meta data files will fail in that case.
This fixes the problem by temporarily attaching a writable FS-instace
during the function is called.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
On-disk counters ndirtysegs and ncleansegs of sufile, can go wrong
after roll-forward recovery because
nilfs_prepare_segment_for_recovery() function marks segments dirty
without adjusting value of these counters.
This fixes the problem by adding a function to sufile which does the
operation adjusting the counters, and by letting the recovery function
use it.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This will simplify sufile.c by sharing common code which repeatedly
appears in routines updating a segment usage entry; a wrapper function
nilfs_sufile_update() is introduced for the purpose, and counter
modifications are integrated to a new function
nilfs_sufile_mod_counter().
This is a preparation for the successive bugfix patch ("nilfs2: fix
possible mismatch of sufile counters on recovery").
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The nilfs_sufile_set_error() function wrongly adjusts the number of
dirty segments instead of the number of clean segments. In addition,
the function calls brelse() twice for the same buffer head.
This fixes these bugs.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This fixes a bug of ("nilfs2: simplify handling of active state of
segments") patch. The patch did not take account that a base index is
increased in nilfs_sufile_get_suinfo() function if requested entries
go across block boundary on sufile.
Due to this bug, the active flag sometimes appears on wrong segments
and has induced malfunction of garbage collection.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
A MODULE_VERSION() macro has been used in out-of-tree nilfs modules,
but it's needless and not updated in tree. So, this removes it along
with the version declaration.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This fixes the following false detection of lockdep against nilfs meta
data files:
=============================================
[ INFO: possible recursive locking detected ]
2.6.29 #26
---------------------------------------------
mount.nilfs2/4185 is trying to acquire lock:
(&mi->mi_sem){----}, at: [<d0c7925b>] nilfs_sufile_get_stat+0x1e/0x105 [nilfs2]
but task is already holding lock:
(&mi->mi_sem){----}, at: [<d0c72026>] nilfs_count_free_blocks+0x48/0x84 [nilfs2]
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The bmap semaphore of DAT file can be held while a bmap of other files
is locked. This has caused the following false detection of lockdep
check:
mount.nilfs2/4667 is trying to acquire lock:
(&bmap->b_sem){..--}, at: [<d0c6c4b4>] nilfs_bmap_lookup_at_level+0x1a/0x74 [nilfs2]
but task is already holding lock:
(&bmap->b_sem){..--}, at: [<d0c6c4b4>] nilfs_bmap_lookup_at_level+0x1a/0x74 [nilfs2]
This will fix the false detection by distinguishing semaphores of the
DAT and other files.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This follows the change of Coly Li's series ("fs: return f_fsid for
statfs(2)"), and make nilfs2 return f_fsid info for statfs(2).
Acked-by: Coly Li <coly.li@suse.de>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
After a review of user's feedback for finding out other compatibility
issues, I found nilfs improperly initializes timestamps in inode;
CURRENT_TIME was used there instead of CURRENT_TIME_SEC even though nilfs
didn't have nanosecond timestamps on disk. A few users gave us the report
that the tar program sometimes failed to expand symbolic links on nilfs,
and it turned out to be the cause.
Instead of applying the above displacement, I've decided to support
nanosecond timestamps on this occation. Fortunetaly, a needless 64-bit
field was in the nilfs_inode struct, and I found it's available for this
purpose without impact for the users.
So, this will do the enhancement and resolve the tar problem.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The former versions didn't have extra super blocks. This improves the
weak point by introducing another super block at unused region in tail of
the partition.
This doesn't break disk format compatibility; older versions just ingore
the secondary super block, and new versions just recover it if it doesn't
exist. The partition created by an old mkfs may not have unused region,
but in that case, the secondary super block will not be added.
This doesn't make more redundant copies of the super block; it is a future
work.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
will reduce some lines of segment constructor. Previously, the state was
complexly controlled through a list of segments in order to keep
consistency in meta data of usage state of segments. Instead, this
presents ``calculated'' active flags to userland cleaner program and stop
maintaining its real flag on disk.
Only by this fake flag, the cleaner cannot exactly know if each segment is
reclaimable or not. However, the recent extension of nilfs_sustat ioctl
struct (nilfs2-extend-nilfs_sustat-ioctl-struct.patch) can prevent the
cleaner from reclaiming in-use segment wrongly.
So, now I can apply this for simplification.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nilfs creates checkpoints even for garbage collection or metadata updates
such as checkpoint mode change. So, user often sees checkpoints created
only by such internal operations.
This is inconvenient in some situations. For example, application that
monitors checkpoints and changes them to snapshots, will fall into an
infinite loop because it cannot distinguish internally created
checkpoints.
This patch solves this sort of problem by adding a flag to checkpoint for
identification.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The sketch file is a file to mark checkpoints with user data. It was
experimentally introduced in the original implementation, and now
obsolete. The file was handled differently with regular files; the file
size got truncated when a checkpoint was created.
This stops the special treatment and will treat it as a regular file.
Most users are not affected because mkfs.nilfs2 no longer makes this file.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds a missing endian conversion of checksum field in the super
block. This fixes compatibility issue on big endian machines which will
come to surface after supporting recovery of super block.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pekka Enberg advised me:
> It would be nice if BUG(), BUG_ON(), and panic() calls would be
> converted to proper error handling using WARN_ON() calls. The BUG()
> call in nilfs_cpfile_delete_checkpoints(), for example, looks to be
> triggerable from user-space via the ioctl() system call.
This will follow the comment and keep them to a minimum.
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds a new argument to the nilfs_sustat structure.
The extended field allows to delete volatile active state of segments,
which was needed to protect freshly-created segments from garbage
collection but has confused code dealing with segments. This
extension alleviates the mess and gives room for further
simplifications.
The volatile active flag is not persistent, so it's eliminable on this
occasion without affecting compatibility other than the ioctl change.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pekka Enberg suggested converting ->ioctl operations to use
->unlocked_ioctl to avoid BKL.
The conversion was verified to be safe, so I will take it on this
occasion.
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This removes compat code from the nilfs ioctls and applies the same
function for both .ioctl and .compat_ioctl file operations.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nilfs ioctl had structures not having fixed sized types such as:
struct nilfs_argv {
void *v_base;
size_t v_nmembs;
size_t v_size;
int v_index;
int v_flags;
};
Further, some of them are wrongly aligned:
e.g.
struct nilfs_cpmode {
__u64 cm_cno;
int cm_mode;
};
The size of wrongly aligned structures varies depending on
architectures, and it breaks the identity of ioctl commands, which
leads to arch dependent errors.
Previously, these are compensated by using compat_ioctl.
This fixes these problems and allows removal of compat ioctl.
Since this will change sizes of those structures, binary compatibility
for the past utilities will once break; new utilities have to be used
instead. However, it would be helpful to avoid platform dependent
problems in the long term.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This removes NILFS_IOCTL_TIMEDWAIT command from ioctl interface along
with the related flags and wait queue.
The command is terrible because it just sleeps in the ioctl. I prefer
to avoid this by devising means of event polling in userland program.
By reconsidering the userland GC daemon, I found this is possible
without changing behaviour of the daemon and sacrificing efficiency.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This will fix the weird behavior of lscp command in listing continuously
created checkpoints; the output of lscp is rewinded regularly for the
recent nilfs. As a result of debugging, a defect was found in
nilfs_cpfile_do_get_cpinfo() function.
Though the function can be repeatedly called to enumerate checkpoints and
it can skip invalid checkpoint entries, the index value was not carried
between successive calls.
The bug has long been present, and came to surface after applying a bugfix
nilfs2-fix-problems-of-memory-allocation-in-ioctl.patch, which increased
frequency of calling the function. The similar bugfix was already applied
for ``snapshots'' by
nilfs2-fix-gc-failure-on-volumes-keeping-numerous-snapshots.patch.
This fixes the problem by making the index argument bidirectional on the
function.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This cleans up the strange indirect function calling convention used in
nilfs to follow the normal kernel coding style.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A few tool developers gave me requests for fixing inconvenient return
value of nilfs_get_cpinfo() ioctl; if the requested mode is NILFS_SNAPSHOT
and the specified start entry is not a snapshot, the ioctl unnaturally
returns one as the number of acquired snapshot item.
In addition, the ioctl function returns an ENOENT error for checkpoints
within blocks deleted by garbage collection.
These behaviors require corrections for programs which enumerate
snapshots. This resolves the inconvenience by changing the return values
to zero for the above cases.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This resolves the following failure of nilfs2 cleaner daemon:
nilfs_cleanerd[20670]: cannot clean segments: No such file or directory
nilfs_cleanerd[20670]: shutdown
When creating thousands of snapshots, the cleaner daemon had rarely died
as above due to an error returned from the kernel code.
After applying the recent patch which fixed memory allocation problems in
ioctl (Message-Id: <20081215.155840.105124170.ryusuke@osrg.net>), the
problem gets more frequent.
It turned out to be a bug of nilfs_ioctl_wrap_copy function and one of its
callback routines to read out information of snapshots; if the
nilfs_ioctl_wrap_copy function divided a large read request into multiple
requests, the second and later requests have failed since a restart
position on snapshot meta data was not properly set forward.
It's a deficiency of the callback interface that cannot pass the restart
position among multiple requests. This patch fixes the issue by allowing
nilfs_ioctl_wrap_copy and snapshot read functions to exchange a position
argument.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The file gcinode.c gives buffer cache functions for on-disk blocks
moved in garbage collection. Joern Engel has suggested inserting its
explanations in the source file (Message-ID:
<20080917144146.GD8750@logfs.org> and
<20080917224953.GB14644@logfs.org>).
This follows the comment.
Cc: Joern Engel <joern@logfs.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pekka Enberg pointed out that double error handlings found after
nilfs_transaction_end() can be avoided by separating abort operation:
OK, I don't understand this. The only way nilfs_transaction_end() can
fail is if we have NILFS_TI_SYNC set and we fail to construct the
segment. But why do we want to construct a segment if we don't commit?
I guess what I'm asking is why don't we have a separate
nilfs_transaction_abort() function that can't fail for the erroneous
case to avoid this double error value tracking thing?
This does the separation and renames nilfs_transaction_end() to
nilfs_transaction_commit() for clarification.
Since, some calls of these functions were used just for exclusion control
against the segment constructor, they are replaced with semaphore
operations.
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This will remove the following unnecessary locks and cleanup code in
nilfs_clear_inode():
- unnecessary protection using nilfs_transaction_begin() and
nilfs_transaction_end().
- cleanup code of i_dirty list field which is never chained
when this function is called.
- spinlock used when releasing i_bh field.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is another patch for fixing the following problems of a memory
copy function in nilfs2 ioctl:
(1) It tries to allocate 128KB size of memory even for small objects.
(2) Though the function repeatedly tries large memory allocations
while reducing the size, GFP_NOWAIT flag is not specified.
This increases the possibility of system memory shortage.
(3) During the retries of (2), verbose warnings are printed
because _GFP_NOWARN flag is not used for the kmalloc calls.
The first patch was still doing large allocations by kmalloc which are
repeatedly tried while reducing the size.
Andi Kleen told me that using copy_from_user for large memory is not
good from the viewpoint of preempt latency:
On Fri, 12 Dec 2008 21:24:11 +0100, Andi Kleen <andi@firstfloor.org> wrote:
> > In the current interface, each data item is copied twice: one is to
> > the allocated memory from user space (via copy_from_user), and another
>
> For such large copies it is better to use multiple smaller (e.g. 4K)
> copy user, that gives better real time preempt latencies. Each cfu has a
> cond_resched(), but only one, not multiple times in the inner loop.
He also advised me that:
On Sun, 14 Dec 2008 16:13:27 +0100, Andi Kleen <andi@firstfloor.org> wrote:
> Better would be if you could go to PAGE_SIZE. order 0 allocations
> are typically the fastest / least likely to stall.
>
> Also in this case it's a good idea to use __get_free_pages()
> directly, kmalloc tends to be become less efficient at larger
> sizes.
For the function in question, the size of buffer memory can be reduced
since the buffer is repeatedly used for a number of small objects. On
the other hand, it may incur large preempt latencies for larger buffer
because a copy_from_user (and a copy_to_user) was applied only once
each cycle.
With that, this revision uses the order 0 allocations with
__get_free_pages() to fix the original problems.
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds a Makefile for the nilfs2 file system, and updates the
makefile and Kconfig file in the file system directory.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds userland interface implemented with ioctl.
Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds the cache of on-disk blocks to be moved in garbage
collection. The disk blocks are held with dummy inodes (called
gcinodes), and this file provides lookup function of the dummy inodes,
and their buffer read function.
Signed-off-by: Seiji Kihara <kihara.seiji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Yoshiji Amagai <amagai.yoshiji@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NILFS2 uses another DAT inode during garbage collection to ensure
atomicity and consistency of the DAT in the transient state. This
twin inode is called GCDAT.
This adds functions to initialize the GCDAT and to switch page caches
and B-tree node caches between these two inodes.
Signed-off-by: Seiji Kihara <kihara.seiji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Yoshiji Amagai <amagai.yoshiji@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds recovery function on mount.
Usually the recovery is achieved by just finding the latest super
root. When logs without checkpoints were appended for data sync
operations after the latest super root, the recovery function will
perform roll forwarding and reconstruct new log(s) with a super root.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chris Mason pointed out that there is a missed sync issue in
nilfs_writepages():
On Wed, 17 Dec 2008 21:52:55 -0500, Chris Mason wrote:
> It looks like nilfs_writepage ignores WB_SYNC_NONE, which is used by
> do_sync_mapping_range().
where WB_SYNC_NONE in do_sync_mapping_range() was replaced with
WB_SYNC_ALL by Nick's patch (commit:
ee53a891f4).
This fixes the problem by letting nilfs_writepages() write out the log of
file data within the range if sync_mode is WB_SYNC_ALL.
This involves removal of nilfs_file_aio_write() which was previously
needed to ensure O_SYNC sync writes.
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds the segment constructor (also called log writer).
The segment constructor collects dirty buffers for every dirty inode,
makes summaries of the buffers, assigns disk block addresses to the
buffers, and then submits BIOs for the buffers.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds the segment buffer which is used to constuct logs.
[akpm@linux-foundation.org: BIO_RW_SYNC got removed]
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds super block operations for the nilfs2 file system.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds functions on the_nilfs object, which keeps shared resources and
states among a read/write mount and snapshots mounts going individually.
the_nilfs is allocated per block device; it is created when user first
mount a snapshot or a read/write mount on the device, then it is reused
for successive mounts. It will be freed when all mount instances on the
device are detached.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds pathname operations, most of which comes from the ext2 file
system.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds directory handling functions, most of which comes from the ext2
file system.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Yoshiji Amagai <amagai.yoshiji@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds primitives for regular file handling.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds a meta data file which stores the allocation state of segments.
[konishi.ryusuke@lab.ntt.co.jp: fix wrong counting of checkpoints and dirty segments]
Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds a meta data file which holds checkpoint entries in its data
blocks.
Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds a meta data file which stores on-disk inodes in its data blocks.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Yoshiji Amagai <amagai.yoshiji@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds the disk address translation file (DAT) whose primary function
is to convert virtual disk block numbers to actual disk block numbers.
The virtual block numbers of NILFS are associated with checkpoint
generation numbers, and this file also provides functions to manage the
lifetime information of each virtual block number.
Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds common functions to allocate or deallocate entries with bitmaps
on a meta data file. This feature is used by the DAT and ifile.
Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Yoshiji Amagai <amagai.yoshiji@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds the meta data file, which serves common buffer functions to the
DAT, sufile, cpfile, ifile, and so forth.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds common routines for buffer/page operations used in B-tree
node caches, meta data files, or segment constructor (log writer).
NILFS uses copy functions for buffers and pages due to the following
reasons:
1) Relocation required for COW
Since NILFS changes address of on-disk blocks, moving buffers
in page cache is needed for the buffers which are not addressed
by a file offset. If buffer size is smaller than page size,
this involves partial copy of pages.
2) Freezing mmapped pages
NILFS calculates checksums for each log to ensure its validity.
If page data changes after the checksum calculation, this validity
check will not work correctly. To avoid this failure for mmaped
pages, NILFS freezes their data by copying.
3) Copy-on-write for DAT pages
NILFS makes clones of DAT page caches in a copy-on-write manner
during GC processes, and this ensures atomicity and consistency
of the DAT in the transient state.
In addition, NILFS uses two obsolete functions, nilfs_mark_buffer_dirty()
and nilfs_clear_page_dirty() respectively.
* nilfs_mark_buffer_dirty() was required to avoid NULL pointer
dereference faults:
Since the page cache of B-tree node pages or data page cache of pseudo
inodes does not have a valid mapping->host, calling mark_buffer_dirty()
for their buffers causes the fault; it calls __mark_inode_dirty(NULL)
through __set_page_dirty().
* nilfs_clear_page_dirty() was needed in the two cases:
1) For B-tree node pages and data pages of the dat/gcdat, NILFS2 clears
page dirty flags when it copies back pages from the cloned cache
(gcdat->{i_mapping,i_btnode_cache}) to its original cache
(dat->{i_mapping,i_btnode_cache}).
2) Some B-tree operations like insertion or deletion may dispose buffers
in dirty state, and this needs to cancel the dirty state of their
pages. clear_page_dirty_for_io() caused faults because it does not
clear the dirty tag on the page cache.
Signed-off-by: Seiji Kihara <kihara.seiji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds block mappings using direct pointers which are stored in the
i_bmap array of inode.
Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds declarations and functions of NILFS2 B-tree.
Two variants are integrated in the NILFS2 B-tree. The B-tree for the most
files points to the child nodes or data blocks with virtual block
addresses, whereas the B-tree of the DAT uses actual block addresses.
Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds structures and operations for the block mapping (bmap for
short). NILFS2 uses direct mappings for short files or B-tree based
mappings for longer files.
Every on-disk data block is held with inodes and managed through this
block mapping. The nilfs_bmap structure and a set of functions here
provide this capability to the NILFS2 inode.
[penberg@cs.helsinki.fi: remove a bunch of bmap wrapper macros]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds the following common structures of the NILFS2 file system.
* nilfs_inode_info structure:
gives on-memory inode.
* nilfs_sb_info structure:
keeps per-mount state and a special inode for the ifile.
This structure is attached to the super_block structure.
* the_nilfs structure:
keeps shared state and locks among a read/write mount and snapshot
mounts. This keeps special inodes for the sufile, cpfile, dat, and
another dat inode used during GC (gcdat). This also has a hash table
of dummy inodes to cache disk blocks during GC (gcinodes).
* nilfs_transaction_info structure:
keeps per task state while nilfs is writing logs or doing indivisible
inode or namespace operations. This structure is used to identify
context during log making and store nest level of the lock which
ensures atomicity of file system operations.
Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
