The CAT875 sub board from Silicon Linux uses a Realtek PHY.
The phy driver commit bbc4d71d63 ("net: phy: realtek: fix
rtl8211e rx/tx delay config") introduced NFS mount failures. Now it
needs both rx/tx delays for the NFS mount to work.
This patch fixes the NFS mount failure issue by adding "rgmii-id" mode
to the avb device node.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: bbc4d71d63 ("net: phy: realtek: fix rtl8211e rx/tx delay config")
Link: https://lore.kernel.org/r/20211115142830.12651-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
When building external modules, vdso_prepare should not be run. If the
kernel sources are read-only, it will fail.
Fixes: fde9c59aeb ("riscv: explicitly use symbol offsets for VDSO")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Let's enable KVM RISC-V in RV64 and RV32 defconfigs as module
so that it always built along with the default kernel image.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
and one revert targeting stable 5.4, for TGL's DSI display clocks
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmGW1DAACgkQ+mJfZA7r
E8oMlwf+N6COiFS92Wv1Lt50RN9jWRFv8UPSr3R9KoqZd1gU/yo0iTMFMm7mZcOc
7uu/ykcuYSBAEB6m/oSMKsklhHTvKC3CUyCQ+dpn5keGe+YLtKlRF1Vkjfrw/+sE
n3P/pxeY4s/QxHpvPeTnuOWocRzFWxglRac4Vlb+UXnwBSt0SFUGkvaigSUefRi9
3VjmrTgR8xWRnadPMae7C3P0ZoHjcmOhCiwQSpBeDXCQD+VFlmlHEFYHRzNRmrJw
MPSkdc8NUjXwb+lHZHWWz/XORrRkP45XII/FYcpq62kN9ak6TzQBc9VLrrcBTURy
Wq8x2LXFtjaDtALoeq0+m84atS3LWQ==
=HwsI
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2021-11-18' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
One quick fix for return error handling, one fix for ADL-P display
and one revert targeting stable 5.4, for TGL's DSI display clocks
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YZbUPIHpR1S3JZ2b@intel.com
for GEM CMA helpers, a Kconfig dependency fix for sun4i, two fixes for
drm/scheduler refcounting and a probing fix for efifb.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYZYGrQAKCRDj7w1vZxhR
xT2AAQCsSVq8evF5G4pcYng9g8G827B+5nefNJ0y5sCSTQgUuQD/dSPrz5CkHMAH
gXqO4GQ+Rf9FwPC3nTirGn9gfhAXkw4=
=iaQ9
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2021-11-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A infoframe corruption fix for nouveau, a wrong free function usage fix
for GEM CMA helpers, a Kconfig dependency fix for sun4i, two fixes for
drm/scheduler refcounting and a probing fix for efifb.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211118075447.5rn6zaulnrequqnm@gilmour
If trace_seq becomes full, trace_seq_vprintf() no longer consumes
arguments from va_list, making va_list out of sync with format
processing by trace_check_vprintf().
This causes va_arg() in trace_check_vprintf() to return wrong
positional argument, which results into a WARN_ON_ONCE() hit.
ftrace_stress_test from LTP triggers this situation.
Fix it by explicitly avoiding further use if va_list at the point
when it's consistency can no longer be guaranteed.
Link: https://lkml.kernel.org/r/20211118145516.13219-1-nikita.yushchenko@virtuozzo.com
Signed-off-by: Nikita Yushchenko <nikita.yushchenko@virtuozzo.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Use memset_startat() to avoid confusing memset() about writing beyond
the target struct member.
Link: https://lkml.kernel.org/r/20211118202217.1285588-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix stack usage on parisc & improve code size bloat
This PR contains 3 commits:
1. Fixes a minor unused variable warning reported by Kernel test robot [0].
2. Improves the reported code bloat (-88KB / 374KB) [1] by outlining
some functions that are unlikely to be used in performance sensitive
workloads.
3. Fixes the reported excess stack usage on parisc [2] by removing -O3
from zstd's compilation flags. -O3 triggered bugs in the hppa-linux-gnu
gcc-8 compiler. -O2 performance is acceptable: neutral compression,
about -1% decompression speed. We also reduce code bloat
(-105KB / 374KB).
After this commit our code bloat is cut from 374KB to 105KB with gcc-11.
If we wanted to cut the remaining 105KB we'd likely have to trade
signicant performance, so I want to say that this is enough for now.
We should be able to get further gains without sacrificing speed, but
that will take some significant optimization effort, and isn't suitable
for a quick fix. I've opened an upstream issue [3] to track the code size,
and try to avoid future regressions, and improve it in the long term.
[0] https://lore.kernel.org/linux-mm/202111120312.833wII4i-lkp@intel.com/T/
[1] https://lkml.org/lkml/2021/11/15/710
[2] https://lkml.org/lkml/2021/11/14/189
[3] https://github.com/facebook/zstd/issues/2867
Link: https://lore.kernel.org/r/20211117014949.1169186-1-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-1-nickrterrell@gmail.com/
Signed-off-by: Nick Terrell <terrelln@fb.com>
-----BEGIN PGP SIGNATURE-----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=kBgl
-----END PGP SIGNATURE-----
Merge tag 'zstd-for-linus-5.16-rc1' of git://github.com/terrelln/linux
Pull zstd fixes from Nick Terrell:
"Fix stack usage on parisc & improve code size bloat
This contains three commits:
1. Fixes a minor unused variable warning reported by Kernel test
robot [0].
2. Improves the reported code bloat (-88KB / 374KB) [1] by outlining
some functions that are unlikely to be used in performance
sensitive workloads.
3. Fixes the reported excess stack usage on parisc [2] by removing
-O3 from zstd's compilation flags. -O3 triggered bugs in the
hppa-linux-gnu gcc-8 compiler. -O2 performance is acceptable:
neutral compression, about -1% decompression speed. We also reduce
code bloat (-105KB / 374KB).
After this our code bloat is cut from 374KB to 105KB with gcc-11. If
we wanted to cut the remaining 105KB we'd likely have to trade
signicant performance, so I want to say that this is enough for now.
We should be able to get further gains without sacrificing speed, but
that will take some significant optimization effort, and isn't
suitable for a quick fix. I've opened an upstream issue [3] to track
the code size, and try to avoid future regressions, and improve it in
the long term"
Link: https://lore.kernel.org/linux-mm/202111120312.833wII4i-lkp@intel.com/T/ [0]
Link: https://lkml.org/lkml/2021/11/15/710 [1]
Link: https://lkml.org/lkml/2021/11/14/189 [2]
Link: https://github.com/facebook/zstd/issues/2867 [3]
Link: https://lore.kernel.org/r/20211117014949.1169186-1-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-1-nickrterrell@gmail.com/
* tag 'zstd-for-linus-5.16-rc1' of git://github.com/terrelln/linux:
lib: zstd: Don't add -O3 to cflags
lib: zstd: Don't inline functions in zstd_opt.c
lib: zstd: Fix unused variable warning
- Prevent the previous high and low thermal zone trip values from
being retained over a system suspend-resume cycle (Manaf
Meethalavalappu Pallikunhi).
- Prevent the int340x thermal driver from being built in 32-bit
kernel configurations, because running it on 32-bit is
questionable (Arnd Bergmann).
-----BEGIN PGP SIGNATURE-----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=39M5
-----END PGP SIGNATURE-----
Merge tag 'thermal-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix the handling of thermal zones during system resume and
disable building of the int340x thermal driver on 32-bit.
Specifics:
- Prevent the previous high and low thermal zone trip values from
being retained over a system suspend-resume cycle (Manaf
Meethalavalappu Pallikunhi)
- Prevent the int340x thermal driver from being built in 32-bit
kernel configurations, because running it on 32-bit is questionable
(Arnd Bergmann)"
* tag 'thermal-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Reset previous low and high trip during thermal zone init
thermal: int340x: Limit Kconfig to 64-bit
- Fix system suspend handling in DTPM when it is enabled, but not
actually used (Daniel Lezcano).
- Describe the new cpufreq callback for Energy Model registration
and explain the "advanced" and "simple" EM variants in the EM
documentation (Lukasz Luba).
-----BEGIN PGP SIGNATURE-----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=zSux
-----END PGP SIGNATURE-----
Merge tag 'pm-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a system-wide suspend issue in the DTPM framework and
improve the Energy Model documentation.
Specifics:
- Fix system suspend handling in DTPM when it is enabled, but not
actually used (Daniel Lezcano)
- Describe the new cpufreq callback for Energy Model registration and
explain the "advanced" and "simple" EM variants in the EM
documentation (Lukasz Luba)"
* tag 'pm-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Documentation: power: Describe 'advanced' and 'simple' EM models
Documentation: power: Add description about new callback for EM registration
powercap: DTPM: Fix suspend failure and kernel warning
Revert tbe change attempting to release PM resources blocked by
unused ACPI objects after device enumeration, because it caused
boot issues to appear on multiple systems.
-----BEGIN PGP SIGNATURE-----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=EyNC
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert the change attempting to release PM resources blocked by unused
ACPI objects after device enumeration, because it caused boot issues
to appear on multiple systems"
* tag 'acpi-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: scan: Release PM resources blocked by unused objects"
Various build- and bug-fixes as well as 1 hardware-id addition.
The following is an automated git shortlog grouped by driver:
amd-pmc:
- Make CONFIG_AMD_PMC depend on RTC_CLASS
dell-wmi-descriptor:
- disable by default
hp_accel:
- Fix an error handling path in 'lis3lv02d_probe()'
platform/mellanox:
- mlxreg-lc: fix error code in mlxreg_lc_create_static_devices()
samsung-laptop:
- Fix typo in a comment
think-lmi:
- Abort probe on analyze failure
thinkpad_acpi:
- fix documentation for adaptive keyboard
- Fix WWAN device disabled issue after S3 deep
- Add support for dual fan control
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmGWHnoUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wwfwf9Hrv9vdzWDnwdeGh5BiWqeTq37/YT
FqYB9HzKIaZKe5MYvibZD7sQQa86Up9/fTNF+TlIj+uMjgvzLkAXWR3841aGM7Mh
z4OhCCx9aJLtpBUWyzsXRmO1ArLfkUIbHMBWMpcrPbeNGIwZMRfuq3ms5wPXWgfu
QzNaDJEBHQlM4aNScb1K3a2HCXJIWcFw78/A8oq7LD0iKxd11ZmOuvKR9MIeUq5s
hH/UEZqeJ8MCG+lNGShYvSCYAG1UIV6qF35XLR8VSlY/FZ48AcT6bgMyrhwJPrCW
yJF6GBd8YnaAJqWWwqeaQMhIi8OKIMthFBbRd4epWAYmgP00w0ROJ+4SLQ==
=siB2
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Various build- and bug-fixes as well as one hardware-id addition"
* tag 'platform-drivers-x86-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: fix documentation for adaptive keyboard
platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deep
platform/x86: thinkpad_acpi: Add support for dual fan control
platform/x86: think-lmi: Abort probe on analyze failure
platform/x86: dell-wmi-descriptor: disable by default
platform/x86: samsung-laptop: Fix typo in a comment
platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()'
platform/x86: amd-pmc: Make CONFIG_AMD_PMC depend on RTC_CLASS
platform/mellanox: mlxreg-lc: fix error code in mlxreg_lc_create_static_devices()
A few small fixes for v5.16, one in the core for an issue with handling
of controller unregistration that was introduced with the fixes for
registering nested SPI controllers and a few more minor device specific
ones.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmGWi0oACgkQJNaLcl1U
h9CYygf+ODj0rPRBpjUwirNQnT97VWWc6ttczQBAAsIPVT11lfC5/lThhm7iBQCX
snMiQVFrpfWWniswN3E5Im56v/cCTIsex9yahp/LZgfwTcufDGhDery9Mu6QtOg9
dSmG61cpuaGBpGSsrmfJ4SBSMZD9vjpyrtcyjsoNRZfNurRTa4NLrfitjo7hPfPN
5AXpVkUizpLTNO6zfvxqg7JEHp4nLzyYBH+VHqGKSqmHdX9Rd1erSudrIXZKI4OS
cXQc1v1ilyRa80XQzGy5C7vh07xgJ0XWVBD528Nt5o8kLUDtJXd5GrPrcY0umYfr
G87iDtyt7stZsTVUitbjwgVehEO11w==
=Mumf
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small fixes for v5.16, one in the core for an issue with
handling of controller unregistration that was introduced with the
fixes for registering nested SPI controllers and a few more minor
device specific ones"
* tag 'spi-fix-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fix use-after-free of the add_lock mutex
spi: spi-geni-qcom: fix error handling in spi_geni_grab_gpi_chan()
spi: lpspi: Silence error message upon deferred probe
spi: cadence-quadspi: fix write completion support
After the update to zstd-1.4.10 passing -O3 is no longer necessary to
get good performance from zstd. Using the default optimization level -O2
is sufficient to get good performance.
I've measured no significant change to compression speed, and a ~1%
decompression speed loss, which is acceptable.
This fixes the reported parisc -Wframe-larger-than=1536 errors [0]. The
gcc-8-hppa-linux-gnu compiler performed very poorly with -O3, generating
stacks that are ~3KB. With -O2 these same functions generate stacks in
the < 100B, completely fixing the problem. Function size deltas are
listed below:
ZSTD_compressBlock_fast_extDict_generic: 3800 -> 68
ZSTD_compressBlock_fast: 2216 -> 40
ZSTD_compressBlock_fast_dictMatchState: 1848 -> 64
ZSTD_compressBlock_doubleFast_extDict_generic: 3744 -> 76
ZSTD_fillDoubleHashTable: 3252 -> 0
ZSTD_compressBlock_doubleFast: 5856 -> 36
ZSTD_compressBlock_doubleFast_dictMatchState: 5380 -> 84
ZSTD_copmressBlock_lazy2: 2420 -> 72
Additionally, this improves the reported code bloat [1]. With gcc-11
bloat-o-meter shows an 80KB code size improvement:
```
> ../scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 31/8 grow/shrink: 24/155 up/down: 25734/-107924 (-82190)
Total: Before=6418562, After=6336372, chg -1.28%
```
Compared to before the zstd-1.4.10 update we see a total code size
regression of 105KB, down from 374KB at v5.16-rc1:
```
> ../scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 292/62 grow/shrink: 56/88 up/down: 235009/-127487 (107522)
Total: Before=6228850, After=6336372, chg +1.73%
```
[0] https://lkml.org/lkml/2021/11/15/710
[1] https://lkml.org/lkml/2021/11/14/189
Link: https://lore.kernel.org/r/20211117014949.1169186-4-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-4-nickrterrell@gmail.com/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>
`zstd_opt.c` contains the match finder for the highest compression
levels. These levels are already very slow, and are unlikely to be used
in the kernel. If they are used, they shouldn't be used in latency
sensitive workloads, so slowing them down shouldn't be a big deal.
This saves 188 KB of the 288 KB regression reported by Geert Uytterhoeven [0].
I've also opened an issue upstream [1] so that we can properly tackle
the code size issue in `zstd_opt.c` for all users, and can hopefully
remove this hack in the next zstd version we import.
Bloat-o-meter output on x86-64:
```
> ../scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 6/5 grow/shrink: 1/9 up/down: 16673/-209939 (-193266)
Function old new delta
ZSTD_compressBlock_opt_generic.constprop - 7559 +7559
ZSTD_insertBtAndGetAllMatches - 6304 +6304
ZSTD_insertBt1 - 1731 +1731
ZSTD_storeSeq - 693 +693
ZSTD_BtGetAllMatches - 255 +255
ZSTD_updateRep - 128 +128
ZSTD_updateTree 96 99 +3
ZSTD_insertAndFindFirstIndexHash3 81 - -81
ZSTD_setBasePrices.constprop 98 - -98
ZSTD_litLengthPrice.constprop 138 - -138
ZSTD_count 362 181 -181
ZSTD_count_2segments 1407 938 -469
ZSTD_insertBt1.constprop 2689 - -2689
ZSTD_compressBlock_btultra2 19990 423 -19567
ZSTD_compressBlock_btultra 19633 15 -19618
ZSTD_initStats_ultra 19825 - -19825
ZSTD_compressBlock_btopt 20374 12 -20362
ZSTD_compressBlock_btopt_extDict 29984 12 -29972
ZSTD_compressBlock_btultra_extDict 30718 15 -30703
ZSTD_compressBlock_btopt_dictMatchState 32689 12 -32677
ZSTD_compressBlock_btultra_dictMatchState 33574 15 -33559
Total: Before=6611828, After=6418562, chg -2.92%
```
[0] https://lkml.org/lkml/2021/11/14/189
[1] https://github.com/facebook/zstd/issues/2862
Link: https://lore.kernel.org/r/20211117014949.1169186-3-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-3-nickrterrell@gmail.com/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>
The variable `litLengthSum` is only used by an `assert()`, so when
asserts are disabled the compiler doesn't see any usage and warns.
This issue is already fixed upstream by PR #2838 [0]. It was reported
by the Kernel test robot in [1].
Another approach would be to change zstd's disabled `assert()`
definition to use the argument in a disabled branch, instead of
ignoring the argument. I've avoided this approach because there are
some small changes necessary to get zstd to build, and I would
want to thoroughly re-test for performance, since that is slightly
changing the code in every function in zstd. It seems like a
trivial change, but some functions are pretty sensitive to small
changes. However, I think it is a valid approach that I would
like to see upstream take, so I've opened Issue #2868 to attempt
this upstream.
Lastly, I've chosen not to use __maybe_unused because all code
in lib/zstd/ must eventually be upstreamed. Upstream zstd can't
use __maybe_unused because it isn't portable across all compilers.
[0] https://github.com/facebook/zstd/pull/2838
[1] https://lore.kernel.org/linux-mm/202111120312.833wII4i-lkp@intel.com/T/
[2] https://github.com/facebook/zstd/issues/2868
Link: https://lore.kernel.org/r/20211117014949.1169186-2-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-2-nickrterrell@gmail.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nick Terrell <terrelln@fb.com>
Current release - regressions:
- devlink: don't throw an error if flash notification sent before
devlink visible
- page_pool: Revert "page_pool: disable dma mapping support...",
turns out there are active arches who need it
Current release - new code bugs:
- amt: cancel delayed_work synchronously in amt_fini()
Previous releases - regressions:
- xsk: fix crash on double free in buffer pool
- bpf: fix inner map state pruning regression causing program
rejections
- mac80211: drop check for DONT_REORDER in __ieee80211_select_queue,
preventing mis-selecting the best effort queue
- mac80211: do not access the IV when it was stripped
- mac80211: fix radiotap header generation, off-by-one
- nl80211: fix getting radio statistics in survey dump
- e100: fix device suspend/resume
Previous releases - always broken:
- tcp: fix uninitialized access in skb frags array for Rx 0cp
- bpf: fix toctou on read-only map's constant scalar tracking
- bpf: forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs
- tipc: only accept encrypted MSG_CRYPTO msgs
- smc: transfer remaining wait queue entries during fallback,
fix missing wake ups
- udp: validate checksum in udp_read_sock() (when sockmap is used)
- sched: act_mirred: drop dst for the direction from egress to ingress
- virtio_net_hdr_to_skb: count transport header in UFO, prevent
allowing bad skbs into the stack
- nfc: reorder the logic in nfc_{un,}register_device, fix unregister
- ipsec: check return value of ipv6_skip_exthdr
- usb: r8152: add MAC passthrough support for more Lenovo Docks
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=tlqV
-----END PGP SIGNATURE-----
Merge tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, mac80211.
Current release - regressions:
- devlink: don't throw an error if flash notification sent before
devlink visible
- page_pool: Revert "page_pool: disable dma mapping support...",
turns out there are active arches who need it
Current release - new code bugs:
- amt: cancel delayed_work synchronously in amt_fini()
Previous releases - regressions:
- xsk: fix crash on double free in buffer pool
- bpf: fix inner map state pruning regression causing program
rejections
- mac80211: drop check for DONT_REORDER in __ieee80211_select_queue,
preventing mis-selecting the best effort queue
- mac80211: do not access the IV when it was stripped
- mac80211: fix radiotap header generation, off-by-one
- nl80211: fix getting radio statistics in survey dump
- e100: fix device suspend/resume
Previous releases - always broken:
- tcp: fix uninitialized access in skb frags array for Rx 0cp
- bpf: fix toctou on read-only map's constant scalar tracking
- bpf: forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing
progs
- tipc: only accept encrypted MSG_CRYPTO msgs
- smc: transfer remaining wait queue entries during fallback, fix
missing wake ups
- udp: validate checksum in udp_read_sock() (when sockmap is used)
- sched: act_mirred: drop dst for the direction from egress to
ingress
- virtio_net_hdr_to_skb: count transport header in UFO, prevent
allowing bad skbs into the stack
- nfc: reorder the logic in nfc_{un,}register_device, fix unregister
- ipsec: check return value of ipv6_skip_exthdr
- usb: r8152: add MAC passthrough support for more Lenovo Docks"
* tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits)
ptp: ocp: Fix a couple NULL vs IS_ERR() checks
net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock()
net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound
ipv6: check return value of ipv6_skip_exthdr
e100: fix device suspend/resume
devlink: Don't throw an error if flash notification sent before devlink visible
page_pool: Revert "page_pool: disable dma mapping support..."
ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port()
octeontx2-af: debugfs: don't corrupt user memory
NFC: add NCI_UNREG flag to eliminate the race
NFC: reorder the logic in nfc_{un,}register_device
NFC: reorganize the functions in nci_request
tipc: check for null after calling kmemdup
i40e: Fix display error code in dmesg
i40e: Fix creation of first queue by omitting it if is not power of two
i40e: Fix warning message and call stack during rmmod i40e driver
i40e: Fix ping is lost after configuring ADq on VF
i40e: Fix changing previously set num_queue_pairs for PFs
i40e: Fix NULL ptr dereference on VSI filter sync
i40e: Fix correct max_pkt_size on VF RX queue
...
-----BEGIN PGP SIGNATURE-----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=ze0L
-----END PGP SIGNATURE-----
Merge tag 'for-5.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Several xes and one old ioctl deprecation. Namely there's fix for
crashes/warnings with lzo compression that was suspected to be caused
by first pull merge resolution, but it was a different bug.
Summary:
- regression fix for a crash in lzo due to missing boundary checks of
the page array
- fix crashes on ARM64 due to missing barriers when synchronizing
status bits between work queues
- silence lockdep when reading chunk tree during mount
- fix false positive warning in integrity checker on devices with
disabled write caching
- fix signedness of bitfields in scrub
- start deprecation of balance v1 ioctl"
* tag 'for-5.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: deprecate BTRFS_IOC_BALANCE ioctl
btrfs: make 1-bit bit-fields of scrub_page unsigned int
btrfs: check-integrity: fix a warning on write caching disabled disk
btrfs: silence lockdep when reading chunk tree during mount
btrfs: fix memory ordering between normal and ordered work functions
btrfs: fix a out-of-bound access in copy_compressed_data_to_page()
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmGWL+AACgkQnJ2qBz9k
QNnK3ggAtJLlaCwg4TxyIIGEWBP/KBKs2STLf80VDavhxZuplKKZ0o5/9IPZ2uu9
v9SgME4hnGpUNaECttVWqijT823SiIxA/4uFSBnN1hLlvPj2Wkwl0oRWb6vCFzZ5
OBUiZrycZKxEq78p2Ao8+FxeRsJ9RuXHnPkZULAqizkEue23d+gW33cO0x//UwB0
lB6i32yDqCmOAtLaT1Div5ttJ3oM/hGBbOURkh3YB7jV2MxojHX28ZjDv657S30k
lhpQwvmHF70jM7MPWbxtcbSTBdPKQdaF5+oDqpAFwDQn3nhEk1sjw6IrCUKr2NAK
Z+YFlRgv5eD+loRPEBVVU/6QrmfSEQ==
=ueAF
-----END PGP SIGNATURE-----
Merge tag 'fs_for_v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF fix from Jan Kara:
"A fix for a long-standing UDF bug where we were not properly
validating directory position inside readdir"
* tag 'fs_for_v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix crash after seekdir
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYZZM2AAKCRCRxhvAZXjc
onQYAP4oKQBguYvFThF4H4VnJY1xoS/33rNOqwPumubdj/8P2AD9EFOegFKYBFr7
tCpokujZl3jZTOqV6h32JDQkPZB0kAc=
=AqiS
-----END PGP SIGNATURE-----
Merge tag 'fs.idmapped.v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull setattr idmapping fix from Christian Brauner:
"This contains a simple fix for setattr. When determining the validity
of the attributes the ia_{g,u}id fields contain the value that will be
written to inode->i_{g,u}id. When the {g,u}id attribute of the file
isn't altered and the caller's fs{g,u}id matches the current {g,u}id
attribute the attribute change is allowed.
The value in ia_{g,u}id does already account for idmapped mounts and
will have taken the relevant idmapping into account. So in order to
verify that the {g,u}id attribute isn't changed we simple need to
compare the ia_{g,u}id value against the inode's i_{g,u}id value.
This only has any meaning for idmapped mounts as idmapping helpers are
idempotent without them. And for idmapped mounts this really only has
a meaning when circular idmappings are used, i.e. mappings where e.g.
id 1000 is mapped to id 1001 and id 1001 is mapped to id 1000. Such
ciruclar mappings can e.g. be useful when sharing the same home
directory between multiple users at the same time.
Before this patch we could end up denying legitimate attribute changes
and allowing invalid attribute changes when circular mappings are
used. To even get into this situation the caller must've been
privileged both to create that mapping and to create that idmapped
mount.
This hasn't been seen in the wild anywhere but came up when expanding
the fstest suite during work on a series of hardening patches. All
idmapped fstests pass without any regressions and we're adding new
tests to verify the behavior of circular mappings.
The new tests can be found at [1]"
Link: https://lore.kernel.org/linux-fsdevel/20211109145713.1868404-2-brauner@kernel.org [1]
* tag 'fs.idmapped.v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fs: handle circular mappings correctly
Fix some warnings which showed up with allmodconfig builds, a revert of
a change to the sigreturn trampoline which broke signal handling, wire
up futex_waitv and add CONFIG_PRINTK_TIME=y to 32bit defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYZZcxQAKCRD3ErUQojoP
X5FDAQDlg+P0Bt/CZaGNjmTv3MFfGJuykiahOp4lxLwjaTQhZwD9Foagdyj/LMMJ
ZBuVaIMo63iG0M9WJubk3oSGR+KVUgg=
=cyfZ
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"parisc bug and warning fixes and wire up futex_waitv.
Fix some warnings which showed up with allmodconfig builds, a revert
of a change to the sigreturn trampoline which broke signal handling,
wire up futex_waitv and add CONFIG_PRINTK_TIME=y to 32bit defconfig"
* tag 'for-5.16/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Enable CONFIG_PRINTK_TIME=y in 32bit defconfig
Revert "parisc: Reduce sigreturn trampoline to 3 instructions"
parisc: Wrap assembler related defines inside __ASSEMBLY__
parisc: Wire up futex_waitv
parisc: Include stringify.h to avoid build error in crypto/api.c
parisc/sticon: fix reverse colors
* Cleanups for the perf test infrastructure and mapping hugepages
* Avoid contention on mmap_sem when the guests start to run
* Add event channel upcall support to xen_shinfo_test
x86 changes:
* Fixes for Xen emulation
* Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache
* Fixes for migration of 32-bit nested guests on 64-bit hypervisor
* Compilation fixes
* More SEV cleanups
Generic:
* Cap the return value of KVM_CAP_NR_VCPUS to both KVM_CAP_MAX_VCPUS
and num_online_cpus(). Most architectures were only using one of the two.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGV/PAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMrogf/eAyilGRQL7lLETn3DTVlgLVv82+z
giX11HlUhUmATHIDluj/wVQUjVcY6AO4SnvFaudX7B+mibndkw4L19IubP/koQZu
xnKSJTn+mVANdzz3UdsHl0ujbPdQJaFCIPW6iewbn2GRRZMwA5F3vMK/H09XRApL
I7kq8CPA6sC0I3TPzPN3ROxigexzYunZmGQ4qQe0GUdtxHrJOYQN++ddmWbQoEIC
gdFTyF7CUQ+lmJe0b/Y88yhISFAJCEBuKFlg9tOTuxSfwvPX6lUu+pi+utEx9M+O
ckTSQli/apZ4RVcSzxMIwX/BciYqhqOz5uMG+w4DRlJixtGSHtjiEVxGxw==
=Iij4
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Selftest changes:
- Cleanups for the perf test infrastructure and mapping hugepages
- Avoid contention on mmap_sem when the guests start to run
- Add event channel upcall support to xen_shinfo_test
x86 changes:
- Fixes for Xen emulation
- Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache
- Fixes for migration of 32-bit nested guests on 64-bit hypervisor
- Compilation fixes
- More SEV cleanups
Generic:
- Cap the return value of KVM_CAP_NR_VCPUS to both KVM_CAP_MAX_VCPUS
and num_online_cpus(). Most architectures were only using one of
the two"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: x86: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: s390: Cap KVM_CAP_NR_VCPUS by num_online_cpus()
KVM: RISC-V: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: PPC: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: MIPS: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: arm64: Cap KVM_CAP_NR_VCPUS by kvm_arm_default_max_vcpus()
KVM: x86: Assume a 64-bit hypercall for guests with protected state
selftests: KVM: Add /x86_64/sev_migrate_tests to .gitignore
riscv: kvm: fix non-kernel-doc comment block
KVM: SEV: Fix typo in and tweak name of cmd_allowed_from_miror()
KVM: SEV: Drop a redundant setting of sev->asid during initialization
KVM: SEV: WARN if SEV-ES is marked active but SEV is not
KVM: SEV: Set sev_info.active after initial checks in sev_guest_init()
KVM: SEV: Disallow COPY_ENC_CONTEXT_FROM if target has created vCPUs
KVM: Kill kvm_map_gfn() / kvm_unmap_gfn() and gfn_to_pfn_cache
KVM: nVMX: Use a gfn_to_hva_cache for vmptrld
KVM: nVMX: Use kvm_read_guest_offset_cached() for nested VMCS check
KVM: x86/xen: Use sizeof_field() instead of open-coding it
KVM: nVMX: Use kvm_{read,write}_guest_cached() for shadow_vmcs12
KVM: x86/xen: Fix get_attr of KVM_XEN_ATTR_TYPE_SHARED_INFO
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmGWKj8ACgkQF0NaE2wM
flgj6gf+MoAnm6/LBGso1SlzTs7+gpBSpWX9I+MLEtZAvCUxuA5Nl7ogKR/oTfT+
PkB9r7c1aTEaNBTY8zJ95Dx1uiK8J80O0SiNcsIP4W+Nb8btByAnf8aotxcyR/Yc
oofpM1jTmy8KSH61ZuOvnS0jimSGNTNk4dpgiMWYq3l4OL4OWgggHKoZoIsYjiwx
NgXankSSXdLB71Dl+Gsnyfw+oPiNiskjbHLIRvAjTkqnoTbb94X+UO2ic9uUJaYw
13l3pzDiPoyl2vCTXvXeTZhnN6VlmqNeIIA5lKvnY/UlEkgX0rSJmNx7Hfu7JvNB
Zkb4lvpjfxNtd5CU2DuhExk/C7q4uw==
=2zA1
-----END PGP SIGNATURE-----
Merge tag 'docs-5.16-2' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A handful of documentation fixes for 5.16"
* tag 'docs-5.16-2' of git://git.lwn.net/linux:
Documentation/process: fix a cross reference
Documentation: update vcpu-requests.rst reference
docs: accounting: update delay-accounting.rst reference
libbpf: update index.rst reference
docs: filesystems: Fix grammatical error "with" to "which"
doc/zh_CN: fix a translation error in management-style
docs: ftrace: fix the wrong path of tracefs
Documentation: arm: marvell: Fix link to armada_1000_pb.pdf document
Documentation: arm: marvell: Put Armada XP section between Armada 370 and 375
Documentation: arm: marvell: Add some links to homepage / product infos
docs: Update Sphinx requirements
Calling destroy_hist_field() on an expression will recursively free
any operands associated with the expression. If during expression
parsing the operands of the expression are already set when an error
is encountered, there is no need to explicity free the operands. Doing
so will result in destroy_hist_field() being called twice for the
operands and lead to a use-after-free (UAF) error.
If the operands are associated with the expression, only call
destroy_hist_field() on the expression since the operands will be
recursively freed.
Link: https://lore.kernel.org/all/CAHk-=wgcrEbFgkw9720H3tW-AhHOoEKhYwZinYJw4FpzSaJ6_Q@mail.gmail.com/
Link: https://lkml.kernel.org/r/20211118011542.1420131-1-kaleshsingh@google.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Fixes: 8b5d46fd7a ("tracing/histogram: Optimize division by constants")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=wbBy
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.16-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
- Try to flush backtraces from other CPUs also on the local one. This
was a regression caused by printk_safe buffers removal.
- Remove header dependency warning.
* tag 'printk-for-5.16-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Remove printk.h inclusion in percpu.h
printk: restore flushing of NMI buffers on remote CPUs after NMI backtraces
Currently it is not possible to build the ftrace direct multi example
anymore due to broken config dependencies. Fix this by adding
SAMPLE_FTRACE_DIRECT_MULTI config option.
This broke when merging s390-5.16-1 due to an incorrect merge conflict
resolution proposed by me.
Also rename SAMPLE_FTRACE_MULTI_DIRECT to SAMPLE_FTRACE_DIRECT_MULTI
so it matches the module name.
Fixes: 0b707e572a ("Merge tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux")
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20211115195614.3173346-2-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
My borntraeger@de.ibm.com email is just a forwarder to the
linux.ibm.com address. Let us remove the extra hop to avoid
a potential source of errors.
While at it, add the relevant email addresses to mailmap.
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20211116135803.119489-2-borntraeger@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
kexec_file_add_ipl_report ignores that ipl_report_finish may fail and
can return an error pointer instead of a valid pointer.
Fix this and simplify by returning NULL in case of an error and let
the only caller handle this case.
Fixes: 99feaa717e ("s390/kexec_file: Create ipl report and pass to next kernel")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This commit fixes a bug introduced by commit e9e7870f90 ("s390/dump:
introduce boot data 'oldmem_data'").
OLDMEM_BASE was mistakenly replaced by oldmem_data.size instead of
oldmem_data.start.
This bug caused the following error during kdump:
kdump.sh[878]: No program header covering vaddr 0x3434f5245found kexec bug?
Fixes: e9e7870f90 ("s390/dump: introduce boot data 'oldmem_data'")
Cc: stable@vger.kernel.org # 5.15+
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
unit may have a strdup pointer or be to a literal, consequently memory
assocciated with it isn't freed. Change it so the unit is always strdup
and so the memory can be safely freed.
Fix related issue in perf_event__process_event_update() for name and
own_cpus. Leaks were spotted by leak sanitizer.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211118084749.2191447-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_tip() may allocate memory or use a literal, this means memory
wasn't freed if allocated. Change the API so that literals aren't used.
At the same time add missing frees for system_path. These issues were
spotted using leak sanitizer.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211118073804.2149974-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_hpp__column_unregister() removes an entry from a list but doesn't
free the memory causing a memory leak spotted by leak sanitizer.
Add the free while at the same time reducing the scope of the function
to static.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211118071247.2140392-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The patch removing the feature-sync-compare-and-swap feature detection
didn't remove the call to main_test_sync_compare_and_swap(), making the
'test-all' case fail an all the feature tests to be performed
individually:
$ cat /tmp/build/perf/feature/test-all.make.output
In file included from test-all.c:18:
test-libpython-version.c:5:10: error: #error
5 | #error
| ^~~~~
test-all.c: In function ‘main’:
test-all.c:203:9: error: implicit declaration of function ‘main_test_sync_compare_and_swap’ [-Werror=implicit-function-declaration]
203 | main_test_sync_compare_and_swap(argc, argv);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
$
Fix it, now to figure out what is that test-libpython-version.c
problem...
Fixes: 60fa754b2a ("tools: Remove feature-sync-compare-and-swap feature detection")
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YZU9Fe0sgkHSXeC2@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf inject' is currently not working for Arm SPE. When you try to run
'perf inject' and 'perf report' with a perf.data file that contains SPE
traces, the tool reports a "Bad address" error:
# ./perf record -e arm_spe_0/ts_enable=1,store_filter=1,branch_filter=1,load_filter=1/ -a -- sleep 1
# ./perf inject -i perf.data -o perf.inject.data --itrace
# ./perf report -i perf.inject.data --stdio
0x42c00 [0x8]: failed to process type: 9 [Bad address]
Error:
failed to process sample
As far as I know, the issue was first spotted in [1], but 'perf inject'
was not yet injecting the samples. This patch does something similar to
what cs_etm does for injecting the samples [2], but for SPE.
[1] https://patchwork.kernel.org/project/linux-arm-kernel/cover/20210412091006.468557-1-leo.yan@linaro.org/#24117339
[2] https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/util/cs-etm.c?h=perf/core&id=133fe2e617e48ca0948983329f43877064ffda3e#n1196
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211105104130.28186-2-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ASan reports memory leaks while running:
$ perf bench sched all
Fixes: e27454cc63 ("perf bench: Add sched-messaging.c: Benchmark for scheduler and IPC mechanisms based on hackbench")
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Russel <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pierre Gondois <pierre.gondois@arm.com>
Link: http://lore.kernel.org/lkml/20211110022012.16620-1-sohaib.amhmd@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 10269a2ca2 ("perf test sample-parsing: Add endian test for
struct branch_flags") broke the test case 27 (Sample parsing) on s390 on
linux-next tree:
# perf test -Fv 27
27: Sample parsing
--- start ---
parsing failed for sample_type 0x800
---- end ----
Sample parsing: FAILED!
#
The cause of the failure is a wrong #define BS_EXPECTED_BE statement in
above commit. Correct this define and the test case runs fine.
Output After:
# perf test -Fv 27
27: Sample parsing :
--- start ---
---- end ----
Sample parsing: Ok
#
Fixes: 10269a2ca2 ("perf test sample-parsing: Add endian test for struct branch_flags")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
CC: Sven Schnelle <svens@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/54077e81-503e-3405-6cb0-6541eb5532cc@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
828ca89628 ("KVM: x86: Expose TSC offset controls to userspace")
That just rebuilds kvm-stat.c on x86, no change in functionality.
This silences these perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Cc: Oliver Upton <oupton@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
andle 'p_stage_cyc' (for pipeline stage cycles) sort key with the same
rationale as for the 'weight' and 'local_weight', see the fix in this
series for a full explanation.
Not sure it also needs the local and global variants.
But I couldn't test it actually because I don't have the machine.
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211105225617.151364-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Handle 'ins_lat' (for instruction latency) and 'local_ins_lat' sort keys
with the same rationale as for the 'weight' and 'local_weight', see the
previous fix in this series for a full explanation.
But I couldn't test it actually, so only build tested.
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211105225617.151364-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, the 'weight' field in the perf sample has latency information
for some instructions like in memory accesses. And perf tool has 'weight'
and 'local_weight' sort keys to display the info.
But it's somewhat confusing what it shows exactly. In my understanding,
'local_weight' shows a weight in a single sample, and (global) 'weight'
shows a sum of the weights in the hist_entry.
For example:
$ perf mem record -t load dd if=/dev/zero of=/dev/null bs=4k count=1M
$ perf report --stdio -n -s +local_weight
...
#
# Overhead Samples Command Shared Object Symbol Local Weight
# ........ ....... ....... ................ ......................... ............
#
21.23% 313 dd [kernel.vmlinux] [k] lockref_get_not_zero 32
12.43% 183 dd [kernel.vmlinux] [k] lockref_get_not_zero 35
11.97% 159 dd [kernel.vmlinux] [k] lockref_get_not_zero 36
10.40% 141 dd [kernel.vmlinux] [k] lockref_put_return 32
7.63% 113 dd [kernel.vmlinux] [k] lockref_get_not_zero 33
6.37% 92 dd [kernel.vmlinux] [k] lockref_get_not_zero 34
6.15% 90 dd [kernel.vmlinux] [k] lockref_put_return 33
...
So let's look at the 'lockref_get_not_zero' symbols. The top entry
shows that 313 samples were captured with 'local_weight' 32, so the
total weight should be 313 x 32 = 10016. But it's not the case:
$ perf report --stdio -n -s +local_weight,weight -S lockref_get_not_zero
...
#
# Overhead Samples Command Shared Object Local Weight Weight
# ........ ....... ....... ................ ............ ......
#
1.36% 4 dd [kernel.vmlinux] 36 144
0.47% 4 dd [kernel.vmlinux] 37 148
0.42% 4 dd [kernel.vmlinux] 32 128
0.40% 4 dd [kernel.vmlinux] 34 136
0.35% 4 dd [kernel.vmlinux] 36 144
0.34% 4 dd [kernel.vmlinux] 35 140
0.30% 4 dd [kernel.vmlinux] 36 144
0.30% 4 dd [kernel.vmlinux] 34 136
0.30% 4 dd [kernel.vmlinux] 32 128
0.30% 4 dd [kernel.vmlinux] 32 128
...
With the 'weight' sort key, it's divided to 4 samples even with the same
info ('comm', 'dso', 'sym' and 'local_weight'). I don't think this is
what we want.
I found this because of the way it aggregates the 'weight' value. Since
it's not a period, we should not add them in the he->stat. Otherwise,
two 32 'weight' entries will create a 64 'weight' entry.
After that, new 32 'weight' samples don't have a matching entry so it'd
create a new entry and make it a 64 'weight' entry again and again.
Later, they will be merged into 128 'weight' entries during the
hists__collapse_resort() with 4 samples, multiple times like above.
Let's keep the weight and display it differently. For 'local_weight',
it can show the weight as is, and for (global) 'weight' it can display
the number multiplied by the number of samples.
With this change, I can see the expected numbers.
$ perf report --stdio -n -s +local_weight,weight -S lockref_get_not_zero
...
#
# Overhead Samples Command Shared Object Local Weight Weight
# ........ ....... ....... ................ ............ .....
#
21.23% 313 dd [kernel.vmlinux] 32 10016
12.43% 183 dd [kernel.vmlinux] 35 6405
11.97% 159 dd [kernel.vmlinux] 36 5724
7.63% 113 dd [kernel.vmlinux] 33 3729
6.37% 92 dd [kernel.vmlinux] 34 3128
4.17% 59 dd [kernel.vmlinux] 37 2183
0.08% 1 dd [kernel.vmlinux] 269 269
0.08% 1 dd [kernel.vmlinux] 38 38
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211105225617.151364-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is being used in tools/perf/arch/arm64/util/arm-spe.c and the
COMPAT_NEED_REALLOCARRAY was only being set when CORESIGHT=1 is set.
Fixes: 56c31cdff7 ("perf arm-spe: Implement find_snapshot callback")
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/all/YZT63mIc7iY01er3@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
