In preparation for adding support for quiescing timers in the final
stage of suspend-to-idle transitions, rework the freeze_enter()
function making the system wait on a wakeup event, the freeze_wake()
function terminating the suspend-to-idle loop and the mechanism by
which deep idle states are entered during suspend-to-idle.
First of all, introduce a simple state machine for suspend-to-idle
and make the code in question use it.
Second, prevent freeze_enter() from losing wakeup events due to race
conditions and ensure that the number of online CPUs won't change
while it is being executed. In addition to that, make it force
all of the CPUs re-enter the idle loop in case they are in idle
states already (so they can enter deeper idle states if possible).
Next, drop cpuidle_use_deepest_state() and replace use_deepest_state
checks in cpuidle_select() and cpuidle_reflect() with a single
suspend-to-idle state check in cpuidle_idle_call().
Finally, introduce cpuidle_enter_freeze() that will simply find the
deepest idle state available to the given CPU and enter it using
cpuidle_enter().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Neaten the MODULE_PARAM_DESC message.
Use 30 seconds in the comment for the zap console locks timeout.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the hypervisor pauses a virtualised kernel the kernel will observe a
jump in timebase, this can cause spurious messages from the softlockup
detector.
Whilst these messages are harmless, they are accompanied with a stack
trace which causes undue concern and more problematically the stack trace
in the guest has nothing to do with the observed problem and can only be
misleading.
Futhermore, on POWER8 this is completely avoidable with the introduction
of the Virtual Time Base (VTB) register.
This patch (of 2):
This permits the use of arch specific clocks for which virtualised kernels
can use their notion of 'running' time, not the elpased wall time which
will include host execution time.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andrew Jones <drjones@redhat.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: chai wen <chaiw.fnst@cn.fujitsu.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Ben Zhang <benzh@chromium.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If an attacker can cause a controlled kernel stack overflow, overwriting
the restart block is a very juicy exploit target. This is because the
restart_block is held in the same memory allocation as the kernel stack.
Moving the restart block to struct task_struct prevents this exploit by
making the restart_block harder to locate.
Note that there are other fields in thread_info that are also easy
targets, at least on some architectures.
It's also a decent simplification, since the restart code is more or less
identical on all architectures.
[james.hogan@imgtec.com: metag: align thread_info::supervisor_stack]
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: David Miller <davem@davemloft.net>
Acked-by: Richard Weinberger <richard@nod.at>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The only caller of cpuset_init_current_mems_allowed is the __init
annotated build_all_zonelists_init, so we can also make the former __init.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vishnu Pratap Singh <vishnu.ps@samsung.com>
Cc: Pintu Kumar <pintu.k@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm->nr_pmds doesn't make sense on !MMU configurations
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, we release css->id in css_release_work_fn, right before calling
css_free callback, so that when css_free is called, the id may have
already been reused for a new cgroup.
I am going to use css->id to create unique names for per memcg kmem
caches. Since kmem caches are destroyed only on css_free, I need css->id
to be freed after css_free was called to avoid name clashes. This patch
therefore moves css->id removal to css_free_work_fn. To prevent
css_from_id from returning a pointer to a stale css, it makes
css_release_work_fn replace the css ptr at css_idr:css->id with NULL.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull ARM updates from Russell King:
- clang assembly fixes from Ard
- optimisations and cleanups for Aurora L2 cache support
- efficient L2 cache support for secure monitor API on Exynos SoCs
- debug menu cleanup from Daniel Thompson to allow better behaviour for
multiplatform kernels
- StrongARM SA11x0 conversion to irq domains, and pxa_timer
- kprobes updates for older ARM CPUs
- move probes support out of arch/arm/kernel to arch/arm/probes
- add inline asm support for the rbit (reverse bits) instruction
- provide an ARM mode secondary CPU entry point (for Qualcomm CPUs)
- remove the unused ARMv3 user access code
- add driver_override support to AMBA Primecell bus
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (55 commits)
ARM: 8256/1: driver coamba: add device binding path 'driver_override'
ARM: 8301/1: qcom: Use secondary_startup_arm()
ARM: 8302/1: Add a secondary_startup that assumes ARM mode
ARM: 8300/1: teach __asmeq that r11 == fp and r12 == ip
ARM: kprobes: Fix compilation error caused by superfluous '*'
ARM: 8297/1: cache-l2x0: optimize aurora range operations
ARM: 8296/1: cache-l2x0: clean up aurora cache handling
ARM: 8284/1: sa1100: clear RCSR_SMR on resume
ARM: 8283/1: sa1100: collie: clear PWER register on machine init
ARM: 8282/1: sa1100: use handle_domain_irq
ARM: 8281/1: sa1100: move GPIO-related IRQ code to gpio driver
ARM: 8280/1: sa1100: switch to irq_domain_add_simple()
ARM: 8279/1: sa1100: merge both GPIO irqdomains
ARM: 8278/1: sa1100: split irq handling for low GPIOs
ARM: 8291/1: replace magic number with PAGE_SHIFT macro in fixup_pv code
ARM: 8290/1: decompressor: fix a wrong comment
ARM: 8286/1: mm: Fix dma_contiguous_reserve comment
ARM: 8248/1: pm: remove outdated comment
ARM: 8274/1: Fix DEBUG_LL for multi-platform kernels (without PL01X)
ARM: 8273/1: Seperate DEBUG_UART_PHYS from DEBUG_LL on EP93XX
...
o Several clean ups to the code
One such clean up was to convert to 64 bit time keeping, in the
ring buffer benchmark code.
o Adding of __print_array() helper macro for TRACE_EVENT()
o Updating the sample/trace_events/ to add samples of different ways to
make trace events. Lots of features have been added since the sample
code was made, and these features are mostly unknown. Developers
have been making their own hacks to do things that are already available.
o Performance improvements. Most notably, I found a performance bug where
a waiter that is waiting for a full page from the ring buffer will
see that a full page is not available, and go to sleep. The sched
event caused by it going to sleep would cause it to wake up again.
It would see that there was still not a full page, and go back to sleep
again, and that would wake it up again, until finally it would see a
full page. This change has been marked for stable.
Other improvements include removing global locks from fast paths.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU3M+GAAoJEEjnJuOKh9ldpWQIAJTUzeVXlU0cf3bVn768VW7e
XS41WHF34l1tNevmKTh6fCPiw8+U0UMGLQt5WKtyaaARsZn2MlefLVuvHPKFlK2w
+qcI4OEVHH97Qgf9HWJSsYgnZaOnOE+TENqnokEgXMimRMuVcd/S4QaGxwJVDcjm
iBF5j2TaG4aGbx4a3J7KueoZ3K+39r3ut15hIGi/IZBZldQ1pt26ytafD/KA3CU3
BLRM2HLttAMsV1ds0EDLgZjSGICVetFcdOmI5Gwj7Qr3KrOTRPYJMNc8NdDL7Js9
v8VhujhFGvcCrhO/IKpVvd9yluz3RCF+Z7ihc+D/+1B3Nsm0PTwN3Fl5J+f89AA=
=u2Mm
-----END PGP SIGNATURE-----
Merge tag 'trace-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The updates included in this pull request for ftrace are:
o Several clean ups to the code
One such clean up was to convert to 64 bit time keeping, in the
ring buffer benchmark code.
o Adding of __print_array() helper macro for TRACE_EVENT()
o Updating the sample/trace_events/ to add samples of different ways
to make trace events. Lots of features have been added since the
sample code was made, and these features are mostly unknown.
Developers have been making their own hacks to do things that are
already available.
o Performance improvements. Most notably, I found a performance bug
where a waiter that is waiting for a full page from the ring buffer
will see that a full page is not available, and go to sleep. The
sched event caused by it going to sleep would cause it to wake up
again. It would see that there was still not a full page, and go
back to sleep again, and that would wake it up again, until finally
it would see a full page. This change has been marked for stable.
Other improvements include removing global locks from fast paths"
* tag 'trace-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Do not wake up a splice waiter when page is not full
tracing: Fix unmapping loop in tracing_mark_write
tracing: Add samples of DECLARE_EVENT_CLASS() and DEFINE_EVENT()
tracing: Add TRACE_EVENT_FN example
tracing: Add TRACE_EVENT_CONDITION sample
tracing: Update the TRACE_EVENT fields available in the sample code
tracing: Separate out initializing top level dir from instances
tracing: Make tracing_init_dentry_tr() static
trace: Use 64-bit timekeeping
tracing: Add array printing helper
tracing: Remove newline from trace_printk warning banner
tracing: Use IS_ERR() check for return value of tracing_init_dentry()
tracing: Remove unneeded includes of debugfs.h and fs.h
tracing: Remove taking of trace_types_lock in pipe files
tracing: Add ref count to tracer for when they are being read by pipe
Userland code may be built using an ABI which permits linking to objects
that have more restrictive floating point requirements. For example,
userland code may be built to target the O32 FPXX ABI. Such code may be
linked with other FPXX code, or code built for either one of the more
restrictive FP32 or FP64. When linking with more restrictive code, the
overall requirement of the process becomes that of the more restrictive
code. The kernel has no way to know in advance which mode the process
will need to be executed in, and indeed it may need to change during
execution. The dynamic loader is the only code which will know the
overall required mode, and so it needs to have a means to instruct the
kernel to switch the FP mode of the process.
This patch introduces 2 new options to the prctl syscall which provide
such a capability. The FP mode of the process is represented as a
simple bitmask combining a number of mode bits mirroring those present
in the hardware. Userland can either retrieve the current FP mode of
the process:
mode = prctl(PR_GET_FP_MODE);
or modify the current FP mode of the process:
err = prctl(PR_SET_FP_MODE, new_mode);
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Matthew Fortune <matthew.fortune@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8899/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull security layer updates from James Morris:
"Highlights:
- Smack adds secmark support for Netfilter
- /proc/keys is now mandatory if CONFIG_KEYS=y
- TPM gets its own device class
- Added TPM 2.0 support
- Smack file hook rework (all Smack users should review this!)"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (64 commits)
cipso: don't use IPCB() to locate the CIPSO IP option
SELinux: fix error code in policydb_init()
selinux: add security in-core xattr support for pstore and debugfs
selinux: quiet the filesystem labeling behavior message
selinux: Remove unused function avc_sidcmp()
ima: /proc/keys is now mandatory
Smack: Repair netfilter dependency
X.509: silence asn1 compiler debug output
X.509: shut up about included cert for silent build
KEYS: Make /proc/keys unconditional if CONFIG_KEYS=y
MAINTAINERS: email update
tpm/tpm_tis: Add missing ifdef CONFIG_ACPI for pnp_acpi_device
smack: fix possible use after frees in task_security() callers
smack: Add missing logging in bidirectional UDS connect check
Smack: secmark support for netfilter
Smack: Rework file hooks
tpm: fix format string error in tpm-chip.c
char/tpm/tpm_crb: fix build error
smack: Fix a bidirectional UDS connect check typo
smack: introduce a special case for tmpfs in smack_d_instantiate()
...
Pull audit fix from Paul Moore:
"Just one patch from the audit tree for v3.20, and a very minor one at
that.
The patch simply removes an old, unused field from the audit_krule
structure, a private audit-only struct. In audit related news, we did
a proper overhaul of the audit pathname code and removed the nasty
getname()/putname() hacks for audit, you should see those patches in
Al's vfs tree if you haven't already.
That's it for audit this time, let's hope for a quiet -rcX series"
* 'upstream' of git://git.infradead.org/users/pcmoore/audit:
audit: remove vestiges of vers_ops
Merge second set of updates from Andrew Morton:
"More of MM"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (83 commits)
mm/nommu.c: fix arithmetic overflow in __vm_enough_memory()
mm/mmap.c: fix arithmetic overflow in __vm_enough_memory()
vmstat: Reduce time interval to stat update on idle cpu
mm/page_owner.c: remove unnecessary stack_trace field
Documentation/filesystems/proc.txt: describe /proc/<pid>/map_files
mm: incorporate read-only pages into transparent huge pages
vmstat: do not use deferrable delayed work for vmstat_update
mm: more aggressive page stealing for UNMOVABLE allocations
mm: always steal split buddies in fallback allocations
mm: when stealing freepages, also take pages created by splitting buddy page
mincore: apply page table walker on do_mincore()
mm: /proc/pid/clear_refs: avoid split_huge_page()
mm: pagewalk: fix misbehavior of walk_page_range for vma(VM_PFNMAP)
mempolicy: apply page table walker on queue_pages_range()
arch/powerpc/mm/subpage-prot.c: use walk->vma and walk_page_vma()
memcg: cleanup preparation for page table walk
numa_maps: remove numa_maps->vma
numa_maps: fix typo in gather_hugetbl_stats
pagemap: use walk->vma instead of calling find_vma()
clear_refs: remove clear_refs_private->vma and introduce clear_refs_test_walk()
...
Including:
- Update of all defconfigs
- Addition of a bunch of config options to modernise our defconfigs
- Some PS3 updates from Geoff
- Optimised memcmp for 64 bit from Anton
- Fix for kprobes that allows 'perf probe' to work from Naveen
- Several cxl updates from Ian & Ryan
- Expanded support for the '24x7' PMU from Cody & Sukadev
- Freescale updates from Scott:
"Highlights include 8xx optimizations, some more work on datapath device
tree content, e300 machine check support, t1040 corenet error reporting,
and various cleanups and fixes."
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=xDU3
-----END PGP SIGNATURE-----
Merge tag 'powerpc-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux
Pull powerpc updates from Michael Ellerman:
- Update of all defconfigs
- Addition of a bunch of config options to modernise our defconfigs
- Some PS3 updates from Geoff
- Optimised memcmp for 64 bit from Anton
- Fix for kprobes that allows 'perf probe' to work from Naveen
- Several cxl updates from Ian & Ryan
- Expanded support for the '24x7' PMU from Cody & Sukadev
- Freescale updates from Scott:
"Highlights include 8xx optimizations, some more work on datapath
device tree content, e300 machine check support, t1040 corenet
error reporting, and various cleanups and fixes"
* tag 'powerpc-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (102 commits)
cxl: Add missing return statement after handling AFU errror
cxl: Fail AFU initialisation if an invalid configuration record is found
cxl: Export optional AFU configuration record in sysfs
powerpc/mm: Warn on flushing tlb page in kernel context
powerpc/powernv: Add OPAL soft-poweroff routine
powerpc/perf/hv-24x7: Document sysfs event description entries
powerpc/perf/hv-gpci: add the remaining gpci requests
powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated
powerpc/perf/hv-24x7: parse catalog and populate sysfs with events
perf: define EVENT_DEFINE_RANGE_FORMAT_LITE helper
perf: add PMU_EVENT_ATTR_STRING() helper
perf: provide sysfs_show for struct perf_pmu_events_attr
powerpc/kernel: Avoid initializing device-tree pointer twice
powerpc: Remove old compile time disabled syscall tracing code
powerpc/kernel: Make syscall_exit a local label
cxl: Fix device_node reference counting
powerpc/mm: bail out early when flushing TLB page
powerpc: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)
perf/powerpc: reset event hw state when adding it to the PMU
powerpc/qe: Use strlcpy()
...
Pull s390 updates from Martin Schwidefsky:
- The remaining patches for the z13 machine support: kernel build
option for z13, the cache synonym avoidance, SMT support,
compare-and-delay for spinloops and the CES5S crypto adapater.
- The ftrace support for function tracing with the gcc hotpatch option.
This touches common code Makefiles, Steven is ok with the changes.
- The hypfs file system gets an extension to access diagnose 0x0c data
in user space for performance analysis for Linux running under z/VM.
- The iucv hvc console gets wildcard spport for the user id filtering.
- The cacheinfo code is converted to use the generic infrastructure.
- Cleanup and bug fixes.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (42 commits)
s390/process: free vx save area when releasing tasks
s390/hypfs: Eliminate hypfs interval
s390/hypfs: Add diagnose 0c support
s390/cacheinfo: don't use smp_processor_id() in preemptible context
s390/zcrypt: fixed domain scanning problem (again)
s390/smp: increase maximum value of NR_CPUS to 512
s390/jump label: use different nop instruction
s390/jump label: add sanity checks
s390/mm: correct missing space when reporting user process faults
s390/dasd: cleanup profiling
s390/dasd: add locking for global_profile access
s390/ftrace: hotpatch support for function tracing
ftrace: let notrace function attribute disable hotpatching if necessary
ftrace: allow architectures to specify ftrace compile options
s390: reintroduce diag 44 calls for cpu_relax()
s390/zcrypt: Add support for new crypto express (CEX5S) adapter.
s390/zcrypt: Number of supported ap domains is not retrievable.
s390/spinlock: add compare-and-delay to lock wait loops
s390/tape: remove redundant if statement
s390/hvc_iucv: add simple wildcard matches to the iucv allow filter
...
The problem is that we check nr_ptes/nr_pmds in exit_mmap() which happens
*before* pgd_free(). And if an arch does pte/pmd allocation in
pgd_alloc() and frees them in pgd_free() we see offset in counters by the
time of the checks.
We tried to workaround this by offsetting expected counter value according
to FIRST_USER_ADDRESS for both nr_pte and nr_pmd in exit_mmap(). But it
doesn't work in some cases:
1. ARM with LPAE enabled also has non-zero USER_PGTABLES_CEILING, but
upper addresses occupied with huge pmd entries, so the trick with
offsetting expected counter value will get really ugly: we will have
to apply it nr_pmds, but not nr_ptes.
2. Metag has non-zero FIRST_USER_ADDRESS, but doesn't do allocation
pte/pmd page tables allocation in pgd_alloc(), just setup a pgd entry
which is allocated at boot and shared accross all processes.
The proposal is to move the check to check_mm() which happens *after*
pgd_free() and do proper accounting during pgd_alloc() and pgd_free()
which would bring counters to zero if nothing leaked.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Tyler Baker <tyler.baker@linaro.org>
Tested-by: Tyler Baker <tyler.baker@linaro.org>
Tested-by: Nishanth Menon <nm@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave noticed that unprivileged process can allocate significant amount of
memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and
memory cgroup. The trick is to allocate a lot of PMD page tables. Linux
kernel doesn't account PMD tables to the process, only PTE.
The use-cases below use few tricks to allocate a lot of PMD page tables
while keeping VmRSS and VmPTE low. oom_score for the process will be 0.
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/mman.h>
#include <sys/prctl.h>
#define PUD_SIZE (1UL << 30)
#define PMD_SIZE (1UL << 21)
#define NR_PUD 130000
int main(void)
{
char *addr = NULL;
unsigned long i;
prctl(PR_SET_THP_DISABLE);
for (i = 0; i < NR_PUD ; i++) {
addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
if (addr == MAP_FAILED) {
perror("mmap");
break;
}
*addr = 'x';
munmap(addr, PMD_SIZE);
mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0);
if (addr == MAP_FAILED)
perror("re-mmap"), exit(1);
}
printf("PID %d consumed %lu KiB in PMD page tables\n",
getpid(), i * 4096 >> 10);
return pause();
}
The patch addresses the issue by account PMD tables to the process the
same way we account PTE.
The main place where PMD tables is accounted is __pmd_alloc() and
free_pmd_range(). But there're few corner cases:
- HugeTLB can share PMD page tables. The patch handles by accounting
the table to all processes who share it.
- x86 PAE pre-allocates few PMD tables on fork.
- Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity
check on exit(2).
Accounting only happens on configuration where PMD page table's level is
present (PMD is not folded). As with nr_ptes we use per-mm counter. The
counter value is used to calculate baseline for badness score by
oom-killer.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: David Rientjes <rientjes@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 5695be142e ("OOM, PM: OOM killed task shouldn't escape PM
suspend") has left a race window when OOM killer manages to
note_oom_kill after freeze_processes checks the counter. The race
window is quite small and really unlikely and partial solution deemed
sufficient at the time of submission.
Tejun wasn't happy about this partial solution though and insisted on a
full solution. That requires the full OOM and freezer's task freezing
exclusion, though. This is done by this patch which introduces oom_sem
RW lock and turns oom_killer_disable() into a full OOM barrier.
oom_killer_disabled check is moved from the allocation path to the OOM
level and we take oom_sem for reading for both the check and the whole
OOM invocation.
oom_killer_disable() takes oom_sem for writing so it waits for all
currently running OOM killer invocations. Then it disable all the further
OOMs by setting oom_killer_disabled and checks for any oom victims.
Victims are counted via mark_tsk_oom_victim resp. unmark_oom_victim. The
last victim wakes up all waiters enqueued by oom_killer_disable().
Therefore this function acts as the full OOM barrier.
The page fault path is covered now as well although it was assumed to be
safe before. As per Tejun, "We used to have freezing points deep in file
system code which may be reacheable from page fault." so it would be
better and more robust to not rely on freezing points here. Same applies
to the memcg OOM killer.
out_of_memory tells the caller whether the OOM was allowed to trigger and
the callers are supposed to handle the situation. The page allocation
path simply fails the allocation same as before. The page fault path will
retry the fault (more on that later) and Sysrq OOM trigger will simply
complain to the log.
Normally there wouldn't be any unfrozen user tasks after
try_to_freeze_tasks so the function will not block. But if there was an
OOM killer racing with try_to_freeze_tasks and the OOM victim didn't
finish yet then we have to wait for it. This should complete in a finite
time, though, because
- the victim cannot loop in the page fault handler (it would die
on the way out from the exception)
- it cannot loop in the page allocator because all the further
allocation would fail and __GFP_NOFAIL allocations are not
acceptable at this stage
- it shouldn't be blocked on any locks held by frozen tasks
(try_to_freeze expects lockless context) and kernel threads and
work queues are not frozen yet
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Suggested-by: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While touching this area let's convert printk to pr_*. This also makes
the printing of continuation lines done properly.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patchset addresses a race which was described in the changelog for
5695be142e ("OOM, PM: OOM killed task shouldn't escape PM suspend"):
: PM freezer relies on having all tasks frozen by the time devices are
: getting frozen so that no task will touch them while they are getting
: frozen. But OOM killer is allowed to kill an already frozen task in order
: to handle OOM situtation. In order to protect from late wake ups OOM
: killer is disabled after all tasks are frozen. This, however, still keeps
: a window open when a killed task didn't manage to die by the time
: freeze_processes finishes.
The original patch hasn't closed the race window completely because that
would require a more complex solution as it can be seen by this patchset.
The primary motivation was to close the race condition between OOM killer
and PM freezer _completely_. As Tejun pointed out, even though the race
condition is unlikely the harder it would be to debug weird bugs deep in
the PM freezer when the debugging options are reduced considerably. I can
only speculate what might happen when a task is still runnable
unexpectedly.
On a plus side and as a side effect the oom enable/disable has a better
(full barrier) semantic without polluting hot paths.
I have tested the series in KVM with 100M RAM:
- many small tasks (20M anon mmap) which are triggering OOM continually
- s2ram which resumes automatically is triggered in a loop
echo processors > /sys/power/pm_test
while true
do
echo mem > /sys/power/state
sleep 1s
done
- simple module which allocates and frees 20M in 8K chunks. If it sees
freezing(current) then it tries another round of allocation before calling
try_to_freeze
- debugging messages of PM stages and OOM killer enable/disable/fail added
and unmark_oom_victim is delayed by 1s after it clears TIF_MEMDIE and before
it wakes up waiters.
- rebased on top of the current mmotm which means some necessary updates
in mm/oom_kill.c. mark_tsk_oom_victim is now called under task_lock but
I think this should be OK because __thaw_task shouldn't interfere with any
locking down wake_up_process. Oleg?
As expected there are no OOM killed tasks after oom is disabled and
allocations requested by the kernel thread are failing after all the tasks
are frozen and OOM disabled. I wasn't able to catch a race where
oom_killer_disable would really have to wait but I kinda expected the race
is really unlikely.
[ 242.609330] Killed process 2992 (mem_eater) total-vm:24412kB, anon-rss:2164kB, file-rss:4kB
[ 243.628071] Unmarking 2992 OOM victim. oom_victims: 1
[ 243.636072] (elapsed 2.837 seconds) done.
[ 243.641985] Trying to disable OOM killer
[ 243.643032] Waiting for concurent OOM victims
[ 243.644342] OOM killer disabled
[ 243.645447] Freezing remaining freezable tasks ... (elapsed 0.005 seconds) done.
[ 243.652983] Suspending console(s) (use no_console_suspend to debug)
[ 243.903299] kmem_eater: page allocation failure: order:1, mode:0x204010
[...]
[ 243.992600] PM: suspend of devices complete after 336.667 msecs
[ 243.993264] PM: late suspend of devices complete after 0.660 msecs
[ 243.994713] PM: noirq suspend of devices complete after 1.446 msecs
[ 243.994717] ACPI: Preparing to enter system sleep state S3
[ 243.994795] PM: Saving platform NVS memory
[ 243.994796] Disabling non-boot CPUs ...
The first 2 patches are simple cleanups for OOM. They should go in
regardless the rest IMO.
Patches 3 and 4 are trivial printk -> pr_info conversion and they should
go in ditto.
The main patch is the last one and I would appreciate acks from Tejun and
Rafael. I think the OOM part should be OK (except for __thaw_task vs.
task_lock where a look from Oleg would appreciated) but I am not so sure I
haven't screwed anything in the freezer code. I have found several
surprises there.
This patch (of 5):
This patch is just a preparatory and it doesn't introduce any functional
change.
Note:
I am utterly unhappy about lowmemory killer abusing TIF_MEMDIE just to
wait for the oom victim and to prevent from new killing. This is
just a side effect of the flag. The primary meaning is to give the oom
victim access to the memory reserves and that shouldn't be necessary
here.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the scheduling-clock interrupt sets the current tasks need_qs flag,
but if the current CPU passes through a quiescent state in the meantime,
then rcu_preempt_qs() will fail to clear the need_qs flag, which can fool
RCU into thinking that additional rcu_read_unlock_special() processing
is needed. This commit therefore clears the need_qs flag before checking
for additional processing.
For this problem to occur, we need rcu_preempt_data.passed_quiesce equal
to true and current->rcu_read_unlock_special.b.need_qs also equal to true.
This condition can occur as follows:
1. CPU 0 is aware of the current preemptible RCU grace period,
but has not yet passed through a quiescent state. Among other
things, this means that rcu_preempt_data.passed_quiesce is false.
2. Task A running on CPU 0 enters a preemptible RCU read-side
critical section.
3. CPU 0 takes a scheduling-clock interrupt, which notices the
RCU read-side critical section and the need for a quiescent state,
and thus sets current->rcu_read_unlock_special.b.need_qs to true.
4. Task A is preempted, enters the scheduler, eventually invoking
rcu_preempt_note_context_switch() which in turn invokes
rcu_preempt_qs().
Because rcu_preempt_data.passed_quiesce is false,
control enters the body of the "if" statement, which sets
rcu_preempt_data.passed_quiesce to true.
5. At this point, CPU 0 takes an interrupt. The interrupt
handler contains an RCU read-side critical section, and
the rcu_read_unlock() notes that current->rcu_read_unlock_special
is nonzero, and thus invokes rcu_read_unlock_special().
6. Once in rcu_read_unlock_special(), the fact that
current->rcu_read_unlock_special.b.need_qs is true becomes
apparent, so rcu_read_unlock_special() invokes rcu_preempt_qs().
Recursively, given that we interrupted out of that same
function in the preceding step.
7. Because rcu_preempt_data.passed_quiesce is now true,
rcu_preempt_qs() does nothing, and simply returns.
8. Upon return to rcu_read_unlock_special(), it is noted that
current->rcu_read_unlock_special is still nonzero (because
the interrupted rcu_preempt_qs() had not yet gotten around
to clearing current->rcu_read_unlock_special.b.need_qs).
9. Execution proceeds to the WARN_ON_ONCE(), which notes that
we are in an interrupt handler and thus duly splats.
The solution, as noted above, is to make rcu_read_unlock_special()
clear out current->rcu_read_unlock_special.b.need_qs after calling
rcu_preempt_qs(). The interrupted rcu_preempt_qs() will clear it again,
but this is harmless. The worst that happens is that we clobber another
attempt to set this field, but this is not a problem because we just
got done reporting a quiescent state.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Fix embarrassing build bug noted by Sasha Levin. ]
Tested-by: Sasha Levin <sasha.levin@oracle.com>
When an application connects to the ring buffer via splice, it can only
read full pages. Splice does not work with partial pages. If there is
not enough data to fill a page, the splice command will either block
or return -EAGAIN (if set to nonblock).
Code was added where if the page is not full, to just sleep again.
The problem is, it will get woken up again on the next event. That
is, when something is written into the ring buffer, if there is a waiter
it will wake it up. The waiter would then check the buffer, see that
it still does not have enough data to fill a page and go back to sleep.
To make matters worse, when the waiter goes back to sleep, it could
cause another event, which would wake it back up again to see it
doesn't have enough data and sleep again. This produces a tremendous
overhead and fills the ring buffer with noise.
For example, recording sched_switch on an idle system for 10 seconds
produces 25,350,475 events!!!
Create another wait queue for those waiters wanting full pages.
When an event is written, it only wakes up waiters if there's a full
page of data. It does not wake up the waiter if the page is not yet
full.
After this change, recording sched_switch on an idle system for 10
seconds produces only 800 events. Getting rid of 25,349,675 useless
events (99.9969% of events!!), is something to take seriously.
Cc: stable@vger.kernel.org # 3.16+
Cc: Rabin Vincent <rabin@rab.in>
Fixes: e30f53aad2 "tracing: Do not busy wait in buffer splice"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since the introduction of the nested sleep warning; we've established
that the occasional sleep inside a wait_event() is fine.
wait_event() loops are invariant wrt. spurious wakeups, and the
occasional sleep has a similar effect on them. As long as its occasional
its harmless.
Therefore replace the 'correct' but verbose wait_woken() thing with
a simple annotation to shut up the warning.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Because wait_event() loops are safe vs spurious wakeups we can allow the
occasional sleep -- which ends up being very similar.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pull networking updates from David Miller:
1) More iov_iter conversion work from Al Viro.
[ The "crypto: switch af_alg_make_sg() to iov_iter" commit was
wrong, and this pull actually adds an extra commit on top of the
branch I'm pulling to fix that up, so that the pre-merge state is
ok. - Linus ]
2) Various optimizations to the ipv4 forwarding information base trie
lookup implementation. From Alexander Duyck.
3) Remove sock_iocb altogether, from CHristoph Hellwig.
4) Allow congestion control algorithm selection via routing metrics.
From Daniel Borkmann.
5) Make ipv4 uncached route list per-cpu, from Eric Dumazet.
6) Handle rfs hash collisions more gracefully, also from Eric Dumazet.
7) Add xmit_more support to r8169, e1000, and e1000e drivers. From
Florian Westphal.
8) Transparent Ethernet Bridging support for GRO, from Jesse Gross.
9) Add BPF packet actions to packet scheduler, from Jiri Pirko.
10) Add support for uniqu flow IDs to openvswitch, from Joe Stringer.
11) New NetCP ethernet driver, from Muralidharan Karicheri and Wingman
Kwok.
12) More sanely handle out-of-window dupacks, which can result in
serious ACK storms. From Neal Cardwell.
13) Various rhashtable bug fixes and enhancements, from Herbert Xu,
Patrick McHardy, and Thomas Graf.
14) Support xmit_more in be2net, from Sathya Perla.
15) Group Policy extensions for vxlan, from Thomas Graf.
16) Remove Checksum Offload support for vxlan, from Tom Herbert.
17) Like ipv4, support lockless transmit over ipv6 UDP sockets. From
Vlad Yasevich.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1494+1 commits)
crypto: fix af_alg_make_sg() conversion to iov_iter
ipv4: Namespecify TCP PMTU mechanism
i40e: Fix for stats init function call in Rx setup
tcp: don't include Fast Open option in SYN-ACK on pure SYN-data
openvswitch: Only set TUNNEL_VXLAN_OPT if VXLAN-GBP metadata is set
ipv6: Make __ipv6_select_ident static
ipv6: Fix fragment id assignment on LE arches.
bridge: Fix inability to add non-vlan fdb entry
net: Mellanox: Delete unnecessary checks before the function call "vunmap"
cxgb4: Add support in cxgb4 to get expansion rom version via ethtool
ethtool: rename reserved1 memeber in ethtool_drvinfo for expansion ROM version
net: dsa: Remove redundant phy_attach()
IB/mlx4: Reset flow support for IB kernel ULPs
IB/mlx4: Always use the correct port for mirrored multicast attachments
net/bonding: Fix potential bad memory access during bonding events
tipc: remove tipc_snprintf
tipc: nl compat add noop and remove legacy nl framework
tipc: convert legacy nl stats show to nl compat
tipc: convert legacy nl net id get to nl compat
tipc: convert legacy nl net id set to nl compat
...
Pull trivial tree changes from Jiri Kosina:
"Patches from trivial.git that keep the world turning around.
Mostly documentation and comment fixes, and a two corner-case code
fixes from Alan Cox"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
kexec, Kconfig: spell "architecture" properly
mm: fix cleancache debugfs directory path
blackfin: mach-common: ints-priority: remove unused function
doubletalk: probe failure causes OOPS
ARM: cache-l2x0.c: Make it clear that cache-l2x0 handles L310 cache controller
msdos_fs.h: fix 'fields' in comment
scsi: aic7xxx: fix comment
ARM: l2c: fix comment
ibmraid: fix writeable attribute with no store method
dynamic_debug: fix comment
doc: usbmon: fix spelling s/unpriviledged/unprivileged/
x86: init_mem_mapping(): use capital BIOS in comment
Pull live patching infrastructure from Jiri Kosina:
"Let me provide a bit of history first, before describing what is in
this pile.
Originally, there was kSplice as a standalone project that implemented
stop_machine()-based patching for the linux kernel. This project got
later acquired, and the current owner is providing live patching as a
proprietary service, without any intentions to have their
implementation merged.
Then, due to rising user/customer demand, both Red Hat and SUSE
started working on their own implementation (not knowing about each
other), and announced first versions roughly at the same time [1] [2].
The principle difference between the two solutions is how they are
making sure that the patching is performed in a consistent way when it
comes to different execution threads with respect to the semantic
nature of the change that is being introduced.
In a nutshell, kPatch is issuing stop_machine(), then looking at
stacks of all existing processess, and if it decides that the system
is in a state that can be patched safely, it proceeds insterting code
redirection machinery to the patched functions.
On the other hand, kGraft provides a per-thread consistency during one
single pass of a process through the kernel and performs a lazy
contignuous migration of threads from "unpatched" universe to the
"patched" one at safe checkpoints.
If interested in a more detailed discussion about the consistency
models and its possible combinations, please see the thread that
evolved around [3].
It pretty quickly became obvious to the interested parties that it's
absolutely impractical in this case to have several isolated solutions
for one task to co-exist in the kernel. During a dedicated Live
Kernel Patching track at LPC in Dusseldorf, all the interested parties
sat together and came up with a joint aproach that would work for both
distro vendors. Steven Rostedt took notes [4] from this meeting.
And the foundation for that aproach is what's present in this pull
request.
It provides a basic infrastructure for function "live patching" (i.e.
code redirection), including API for kernel modules containing the
actual patches, and API/ABI for userspace to be able to operate on the
patches (look up what patches are applied, enable/disable them, etc).
It's relatively simple and minimalistic, as it's making use of
existing kernel infrastructure (namely ftrace) as much as possible.
It's also self-contained, in a sense that it doesn't hook itself in
any other kernel subsystem (it doesn't even touch any other code).
It's now implemented for x86 only as a reference architecture, but
support for powerpc, s390 and arm is already in the works (adding
arch-specific support basically boils down to teaching ftrace about
regs-saving).
Once this common infrastructure gets merged, both Red Hat and SUSE
have agreed to immediately start porting their current solutions on
top of this, abandoning their out-of-tree code. The plan basically is
that each patch will be marked by flag(s) that would indicate which
consistency model it is willing to use (again, the details have been
sketched out already in the thread at [3]).
Before this happens, the current codebase can be used to patch a large
group of secruity/stability problems the patches for which are not too
complex (in a sense that they don't introduce non-trivial change of
function's return value semantics, they don't change layout of data
structures, etc) -- this corresponds to LEAVE_FUNCTION &&
SWITCH_FUNCTION semantics described at [3].
This tree has been in linux-next since December.
[1] https://lkml.org/lkml/2014/4/30/477
[2] https://lkml.org/lkml/2014/7/14/857
[3] https://lkml.org/lkml/2014/11/7/354
[4] http://linuxplumbersconf.org/2014/wp-content/uploads/2014/10/LPC2014_LivePatching.txt
[ The core code is introduced by the three commits authored by Seth
Jennings, which got a lot of changes incorporated during numerous
respins and reviews of the initial implementation. All the followup
commits have materialized only after public tree has been created,
so they were not folded into initial three commits so that the
public tree doesn't get rebased ]"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: add missing newline to error message
livepatch: rename config to CONFIG_LIVEPATCH
livepatch: fix uninitialized return value
livepatch: support for repatching a function
livepatch: enforce patch stacking semantics
livepatch: change ARCH_HAVE_LIVE_PATCHING to HAVE_LIVE_PATCHING
livepatch: fix deferred module patching order
livepatch: handle ancient compilers with more grace
livepatch: kconfig: use bool instead of boolean
livepatch: samples: fix usage example comments
livepatch: MAINTAINERS: add git tree location
livepatch: use FTRACE_OPS_FL_IPMODIFY
livepatch: move x86 specific ftrace handler code to arch/x86
livepatch: samples: add sample live patching module
livepatch: kernel: add support for live patching
livepatch: kernel: add TAINT_LIVEPATCH
Merge misc updates from Andrew Morton:
"Bite-sized chunks this time, to avoid the MTA ratelimiting woes.
- fs/notify updates
- ocfs2
- some of MM"
That laconic "some MM" is mainly the removal of remap_file_pages(),
which is a big simplification of the VM, and which gets rid of a *lot*
of random cruft and special cases because we no longer support the
non-linear mappings that it used.
From a user interface perspective, nothing has changed, because the
remap_file_pages() syscall still exists, it's just done by emulating the
old behavior by creating a lot of individual small mappings instead of
one non-linear one.
The emulation is slower than the old "native" non-linear mappings, but
nobody really uses or cares about remap_file_pages(), and simplifying
the VM is a big advantage.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (78 commits)
memcg: zap memcg_slab_caches and memcg_slab_mutex
memcg: zap memcg_name argument of memcg_create_kmem_cache
memcg: zap __memcg_{charge,uncharge}_slab
mm/page_alloc.c: place zone_id check before VM_BUG_ON_PAGE check
mm: hugetlb: fix type of hugetlb_treat_as_movable variable
mm, hugetlb: remove unnecessary lower bound on sysctl handlers"?
mm: memory: merge shared-writable dirtying branches in do_wp_page()
mm: memory: remove ->vm_file check on shared writable vmas
xtensa: drop _PAGE_FILE and pte_file()-related helpers
x86: drop _PAGE_FILE and pte_file()-related helpers
unicore32: drop pte_file()-related helpers
um: drop _PAGE_FILE and pte_file()-related helpers
tile: drop pte_file()-related helpers
sparc: drop pte_file()-related helpers
sh: drop _PAGE_FILE and pte_file()-related helpers
score: drop _PAGE_FILE and pte_file()-related helpers
s390: drop pte_file()-related helpers
parisc: drop _PAGE_FILE and pte_file()-related helpers
openrisc: drop _PAGE_FILE and pte_file()-related helpers
nios2: drop _PAGE_FILE and pte_file()-related helpers
...
- Rework of the core ACPI resources parsing code to fix issues
in it and make using resource offsets more convenient and
consolidation of some resource-handing code in a couple of places
that have grown analagous data structures and code to cover the
the same gap in the core (Jiang Liu, Thomas Gleixner, Lv Zheng).
- ACPI-based IOAPIC hotplug support on top of the resources handling
rework (Jiang Liu, Yinghai Lu).
- ACPICA update to upstream release 20150204 including an interrupt
handling rework that allows drivers to install raw handlers for
ACPI GPEs which then become entirely responsible for the given GPE
and the ACPICA core code won't touch it (Lv Zheng, David E Box,
Octavian Purdila).
- ACPI EC driver rework to fix several concurrency issues and other
problems related to events handling on top of the ACPICA's new
support for raw GPE handlers (Lv Zheng).
- New ACPI driver for AMD SoCs analogous to the LPSS (Low-Power
Subsystem) driver for Intel chips (Ken Xue).
- Two minor fixes of the ACPI LPSS driver (Heikki Krogerus,
Jarkko Nikula).
- Two new blacklist entries for machines (Samsung 730U3E/740U3E and
510R) where the native backlight interface doesn't work correctly
while the ACPI one does (Hans de Goede).
- Rework of the ACPI processor driver's handling of idle states
to make the code more straightforward and less bloated overall
(Rafael J Wysocki).
- Assorted minor fixes related to ACPI and SFI (Andreas Ruprecht,
Andy Shevchenko, Hanjun Guo, Jan Beulich, Rafael J Wysocki,
Yaowei Bai).
- PCI core power management modification to avoid resuming (some)
runtime-suspended devices during system suspend if they are in
the right states already (Rafael J Wysocki).
- New SFI-based cpufreq driver for Intel platforms using SFI
(Srinidhi Kasagar).
- cpufreq core fixes, cleanups and simplifications (Viresh Kumar,
Doug Anderson, Wolfram Sang).
- SkyLake CPU support and other updates for the intel_pstate driver
(Kristen Carlson Accardi, Srinivas Pandruvada).
- cpufreq-dt driver cleanup (Markus Elfring).
- Init fix for the ARM big.LITTLE cpuidle driver (Sudeep Holla).
- Generic power domains core code fixes and cleanups (Ulf Hansson).
- Operating Performance Points (OPP) core code cleanups and kernel
documentation update (Nishanth Menon).
- New dabugfs interface to make the list of PM QoS constraints
available to user space (Nishanth Menon).
- New devfreq driver for Tegra Activity Monitor (Tomeu Vizoso).
- New devfreq class (devfreq_event) to provide raw utilization data
to devfreq governors (Chanwoo Choi).
- Assorted minor fixes and cleanups related to power management
(Andreas Ruprecht, Krzysztof Kozlowski, Rickard Strandqvist,
Pavel Machek, Todd E Brandt, Wonhong Kwon).
- turbostat updates (Len Brown) and cpupower Makefile improvement
(Sriram Raghunathan).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=zZER
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"We have a few new features this time, including a new SFI-based
cpufreq driver, a new devfreq driver for Tegra Activity Monitor, a new
devfreq class for providing its governors with raw utilization data
and a new ACPI driver for AMD SoCs.
Still, the majority of changes here are reworks of existing code to
make it more straightforward or to prepare it for implementing new
features on top of it. The primary example is the rework of ACPI
resources handling from Jiang Liu, Thomas Gleixner and Lv Zheng with
support for IOAPIC hotplug implemented on top of it, but there is
quite a number of changes of this kind in the cpufreq core, ACPICA,
ACPI EC driver, ACPI processor driver and the generic power domains
core code too.
The most active developer is Viresh Kumar with his cpufreq changes.
Specifics:
- Rework of the core ACPI resources parsing code to fix issues in it
and make using resource offsets more convenient and consolidation
of some resource-handing code in a couple of places that have grown
analagous data structures and code to cover the the same gap in the
core (Jiang Liu, Thomas Gleixner, Lv Zheng).
- ACPI-based IOAPIC hotplug support on top of the resources handling
rework (Jiang Liu, Yinghai Lu).
- ACPICA update to upstream release 20150204 including an interrupt
handling rework that allows drivers to install raw handlers for
ACPI GPEs which then become entirely responsible for the given GPE
and the ACPICA core code won't touch it (Lv Zheng, David E Box,
Octavian Purdila).
- ACPI EC driver rework to fix several concurrency issues and other
problems related to events handling on top of the ACPICA's new
support for raw GPE handlers (Lv Zheng).
- New ACPI driver for AMD SoCs analogous to the LPSS (Low-Power
Subsystem) driver for Intel chips (Ken Xue).
- Two minor fixes of the ACPI LPSS driver (Heikki Krogerus, Jarkko
Nikula).
- Two new blacklist entries for machines (Samsung 730U3E/740U3E and
510R) where the native backlight interface doesn't work correctly
while the ACPI one does (Hans de Goede).
- Rework of the ACPI processor driver's handling of idle states to
make the code more straightforward and less bloated overall (Rafael
J Wysocki).
- Assorted minor fixes related to ACPI and SFI (Andreas Ruprecht,
Andy Shevchenko, Hanjun Guo, Jan Beulich, Rafael J Wysocki, Yaowei
Bai).
- PCI core power management modification to avoid resuming (some)
runtime-suspended devices during system suspend if they are in the
right states already (Rafael J Wysocki).
- New SFI-based cpufreq driver for Intel platforms using SFI
(Srinidhi Kasagar).
- cpufreq core fixes, cleanups and simplifications (Viresh Kumar,
Doug Anderson, Wolfram Sang).
- SkyLake CPU support and other updates for the intel_pstate driver
(Kristen Carlson Accardi, Srinivas Pandruvada).
- cpufreq-dt driver cleanup (Markus Elfring).
- Init fix for the ARM big.LITTLE cpuidle driver (Sudeep Holla).
- Generic power domains core code fixes and cleanups (Ulf Hansson).
- Operating Performance Points (OPP) core code cleanups and kernel
documentation update (Nishanth Menon).
- New dabugfs interface to make the list of PM QoS constraints
available to user space (Nishanth Menon).
- New devfreq driver for Tegra Activity Monitor (Tomeu Vizoso).
- New devfreq class (devfreq_event) to provide raw utilization data
to devfreq governors (Chanwoo Choi).
- Assorted minor fixes and cleanups related to power management
(Andreas Ruprecht, Krzysztof Kozlowski, Rickard Strandqvist, Pavel
Machek, Todd E Brandt, Wonhong Kwon).
- turbostat updates (Len Brown) and cpupower Makefile improvement
(Sriram Raghunathan)"
* tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (151 commits)
tools/power turbostat: relax dependency on APERF_MSR
tools/power turbostat: relax dependency on invariant TSC
Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources
tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONS
tools/power turbostat: relax dependency on root permission
ACPI / video: Add disable_native_backlight quirk for Samsung 510R
ACPI / PM: Remove unneeded nested #ifdef
USB / PM: Remove unneeded #ifdef and associated dead code
intel_pstate: provide option to only use intel_pstate with HWP
ACPI / EC: Add GPE reference counting debugging messages
ACPI / EC: Add query flushing support
ACPI / EC: Refine command storm prevention support
ACPI / EC: Add command flushing support.
ACPI / EC: Introduce STARTED/STOPPED flags to replace BLOCKED flag
ACPI: add AMD ACPI2Platform device support for x86 system
ACPI / table: remove duplicate NULL check for the handler of acpi_table_parse()
ACPI / EC: Update revision due to raw handler mode.
ACPI / EC: Reduce ec_poll() by referencing the last register access timestamp.
ACPI / EC: Fix several GPE handling issues by deploying ACPI_GPE_DISPATCH_RAW_HANDLER mode.
ACPICA: Events: Enable APIs to allow interrupt/polling adaptive request based GPE handling model
...
Commit ed4d4902eb ("mm, hugetlb: remove hugetlb_zero and
hugetlb_infinity") replaced 'unsigned long hugetlb_zero' with 'int zero'
leading to out-of-bounds access in proc_doulongvec_minmax(). Use
'.extra1 = NULL' instead of '.extra1 = &zero'. Passing NULL is
equivalent to passing minimal value, which is 0 for unsigned types.
Fixes: ed4d4902eb ("mm, hugetlb: remove hugetlb_zero and hugetlb_infinity")
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We don't create non-linear mappings anymore. Let's drop code which
handles them in rmap.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* acpi-resources: (23 commits)
Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources
x86/irq, ACPI: Implement ACPI driver to support IOAPIC hotplug
ACPI: Add interfaces to parse IOAPIC ID for IOAPIC hotplug
x86/PCI: Refine the way to release PCI IRQ resources
x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementation
x86/PCI: Fix the range check for IO resources
PCI: Use common resource list management code instead of private implementation
resources: Move struct resource_list_entry from ACPI into resource core
ACPI: Introduce helper function acpi_dev_filter_resource_type()
ACPI: Add field offset to struct resource_list_entry
ACPI: Translate resource into master side address for bridge window resources
ACPI: Return translation offset when parsing ACPI address space resources
ACPI: Enforce stricter checks for address space descriptors
ACPI: Set flag IORESOURCE_UNSET for unassigned resources
ACPI: Normalize return value of resource parser functions
ACPI: Fix a bug in parsing ACPI Memory24 resource
ACPI: Add prefetch decoding to the address space parser
ACPI: Move the window flag logic to the combined parser
ACPI: Unify the parsing of address_space and ext_address_space
ACPI: Let the parser return false for disabled resources
...
Pull timer updates from Ingo Molnar:
"The main changes in this cycle were:
- rework hrtimer expiry calculation in hrtimer_interrupt(): the
previous code had a subtle bug where expiry caching would miss an
expiry, resulting in occasional bogus (late) expiry of hrtimers.
- continuing Y2038 fixes
- ktime division optimization
- misc smaller fixes and cleanups"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Make __hrtimer_get_next_event() static
rtc: Convert rtc_set_ntp_time() to use timespec64
rtc: Remove redundant rtc_valid_tm() from rtc_hctosys()
rtc: Modify rtc_hctosys() to address y2038 issues
rtc: Update rtc-dev to use y2038-safe time interfaces
rtc: Update interface.c to use y2038-safe time interfaces
time: Expose get_monotonic_boottime64 for in-kernel use
time: Expose getboottime64 for in-kernel uses
ktime: Optimize ktime_divns for constant divisors
hrtimer: Prevent stale expiry time in hrtimer_interrupt()
ktime.h: Introduce ktime_ms_delta
Pull scheduler updates from Ingo Molnar:
"The main scheduler changes in this cycle were:
- various sched/deadline fixes and enhancements
- rescheduling latency fixes/cleanups
- rework the rq->clock code to be more consistent and more robust.
- minor micro-optimizations
- ->avg.decay_count fixes
- add a stack overflow check to might_sleep()
- idle-poll handler fix, possibly resulting in power savings
- misc smaller updates and fixes"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/Documentation: Remove unneeded word
sched/wait: Introduce wait_on_bit_timeout()
sched: Pull resched loop to __schedule() callers
sched/deadline: Remove cpu_active_mask from cpudl_find()
sched: Fix hrtick_start() on UP
sched/deadline: Avoid pointless __setscheduler()
sched/deadline: Fix stale yield state
sched/deadline: Fix hrtick for a non-leftmost task
sched/deadline: Modify cpudl::free_cpus to reflect rd->online
sched/idle: Add missing checks to the exit condition of cpu_idle_poll()
sched: Fix missing preemption opportunity
sched/rt: Reduce rq lock contention by eliminating locking of non-feasible target
sched/debug: Print rq->clock_task
sched/core: Rework rq->clock update skips
sched/core: Validate rq_clock*() serialization
sched/core: Remove check of p->sched_class
sched/fair: Fix sched_entity::avg::decay_count initialization
sched/debug: Fix potential call to __ffs(0) in sched_show_task()
sched/debug: Check for stack overflow in ___might_sleep()
sched/fair: Fix the dealing with decay_count in __synchronize_entity_decay()
Commit 6edb2a8a38 introduced
an array map_pages that contains the addresses returned by
kmap_atomic. However, when unmapping those pages, map_pages[0]
is unmapped before map_pages[1], breaking the nesting requirement
as specified in the documentation for kmap_atomic/kunmap_atomic.
This was caught by the highmem debug code present in kunmap_atomic.
Fix the loop to do the unmapping properly.
Link: http://lkml.kernel.org/r/1418871056-6614-1-git-send-email-markivx@codeaurora.org
Cc: stable@vger.kernel.org # 3.5+
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Reported-by: Lime Yang <limey@codeaurora.org>
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- AMD range breakpoints support:
Extend breakpoint tools and core to support address range through
perf event with initial backend support for AMD extended
breakpoints.
The syntax is:
perf record -e mem:addr/len:type
For example set write breakpoint from 0x1000 to 0x1200 (0x1000 + 512)
perf record -e mem:0x1000/512:w
- event throttling/rotating fixes
- various event group handling fixes, cleanups and general paranoia
code to be more robust against bugs in the future.
- kernel stack overhead fixes
User-visible tooling side changes:
- Show precise number of samples in at the end of a 'record' session,
if processing build ids, since we will then traverse the whole
perf.data file and see all the PERF_RECORD_SAMPLE records,
otherwise stop showing the previous off-base heuristicly counted
number of "samples" (Namhyung Kim).
- Support to read compressed module from build-id cache (Namhyung
Kim)
- Enable sampling loads and stores simultaneously in 'perf mem'
(Stephane Eranian)
- 'perf diff' output improvements (Namhyung Kim)
- Fix error reporting for evsel pgfault constructor (Arnaldo Carvalho
de Melo)
Tooling side infrastructure changes:
- Cache eh/debug frame offset for dwarf unwind (Namhyung Kim)
- Support parsing parameterized events (Cody P Schafer)
- Add support for IP address formats in libtraceevent (David Ahern)
Plus other misc fixes"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
perf: Decouple unthrottling and rotating
perf: Drop module reference on event init failure
perf: Use POLLIN instead of POLL_IN for perf poll data in flag
perf: Fix put_event() ctx lock
perf: Fix move_group() order
perf: Fix event->ctx locking
perf: Add a bit of paranoia
perf symbols: Convert lseek + read to pread
perf tools: Use perf_data_file__fd() consistently
perf symbols: Support to read compressed module from build-id cache
perf evsel: Set attr.task bit for a tracking event
perf header: Set header version correctly
perf record: Show precise number of samples
perf tools: Do not use __perf_session__process_events() directly
perf callchain: Cache eh/debug frame offset for dwarf unwind
perf tools: Provide stub for missing pthread_attr_setaffinity_np
perf evsel: Don't rely on malloc working for sz 0
tools lib traceevent: Add support for IP address formats
perf ui/tui: Show fatal error message only if exists
perf tests: Fix typo in sample-parsing.c
...
Pull core locking updates from Ingo Molnar:
"The main changes are:
- mutex, completions and rtmutex micro-optimizations
- lock debugging fix
- various cleanups in the MCS and the futex code"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Optimize setting task running after being blocked
locking/rwsem: Use task->state helpers
sched/completion: Add lock-free checking of the blocking case
sched/completion: Remove unnecessary ->wait.lock serialization when reading completion state
locking/mutex: Explicitly mark task as running after wakeup
futex: Fix argument handling in futex_lock_pi() calls
doc: Fix misnamed FUTEX_CMP_REQUEUE_PI op constants
locking/Documentation: Update code path
softirq/preempt: Add missing current->preempt_disable_ip update
locking/osq: No need for load/acquire when acquire-polling
locking/mcs: Better differentiate between MCS variants
locking/mutex: Introduce ww_mutex_set_context_slowpath()
locking/mutex: Move MCS related comments to proper location
locking/mutex: Checking the stamp is WW only
Pull RCU updates from Ingo Molnar:
"The main RCU changes in this cycle are:
- Documentation updates.
- Miscellaneous fixes.
- Preemptible-RCU fixes, including fixing an old bug in the
interaction of RCU priority boosting and CPU hotplug.
- SRCU updates.
- RCU CPU stall-warning updates.
- RCU torture-test updates"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
rcu: Initialize tiny RCU stall-warning timeouts at boot
rcu: Fix RCU CPU stall detection in tiny implementation
rcu: Add GP-kthread-starvation checks to CPU stall warnings
rcu: Make cond_resched_rcu_qs() apply to normal RCU flavors
rcu: Optionally run grace-period kthreads at real-time priority
ksoftirqd: Use new cond_resched_rcu_qs() function
ksoftirqd: Enable IRQs and call cond_resched() before poking RCU
rcutorture: Add more diagnostics in rcu_barrier() test failure case
torture: Flag console.log file to prevent holdovers from earlier runs
torture: Add "-enable-kvm -soundhw pcspk" to qemu command line
rcutorture: Handle different mpstat versions
rcutorture: Check from beginning to end of grace period
rcu: Remove redundant rcu_batches_completed() declaration
rcutorture: Drop rcu_torture_completed() and friends
rcu: Provide rcu_batches_completed_sched() for TINY_RCU
rcutorture: Use unsigned for Reader Batch computations
rcutorture: Make build-output parsing correctly flag RCU's warnings
rcu: Make _batches_completed() functions return unsigned long
rcutorture: Issue warnings on close calls due to Reader Batch blows
documentation: Fix smp typo in memory-barriers.txt
...
The recent set_affinity commit by me introduced some null
pointer dereferences on driver unload, because some drivers
call this function with a NULL argument. This fixes the issue
by just checking for null before setting the affinity mask.
Fixes: e2e64a9325 ("genirq: Set initial affinity in irq_set_affinity_hint()")
Reported-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20150128185739.9689.84588.stgit@jbrandeb-cp2.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull timer and x86 fix from Ingo Molnar:
"A CLOCK_TAI early expiry fix and an x86 microcode driver oops fix"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Fix incorrect tai offset calculation for non high-res timer systems
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, microcode: Return error from driver init code when loader is disabled
Pull scheduler fixes from Ingo Molnar:
"Misc fixes"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix deadline parameter modification handling
sched/wait: Remove might_sleep() from wait_event_cmd()
sched: Fix crash if cpuset_cpumask_can_shrink() is passed an empty cpumask
sched/fair: Avoid using uninitialized variable in preferred_group_nid()
The warning message when loading modules with a wrong signature has
two spaces in it:
"module verification failed: signature and/or required key missing"
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
parse_args call module parameters' .set handlers, which may use locks defined in the module.
So, these classes should be freed in case parse_args returns error(e.g. due to incorrect parameter passed).
Signed-off-by: Andrey Tsyvarev <tsyvarev@ispras.ru>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Conflicts:
drivers/net/vxlan.c
drivers/vhost/net.c
include/linux/if_vlan.h
net/core/dev.c
The net/core/dev.c conflict was the overlap of one commit marking an
existing function static whilst another was adding a new function.
In the include/linux/if_vlan.h case, the type used for a local
variable was changed in 'net', whereas the function got rewritten
to fix a stacked vlan bug in 'net-next'.
In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next'
overlapped with an endainness fix for VHOST 1.0 in 'net'.
In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter
in 'net-next' whereas in 'net' there was a bug fix to pass in the
correct network namespace pointer in calls to this function.
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently ACPI, PCI and pnp all implement the same resource list
management with different data structure. We need to transfer from
one data structure into another when passing resources from one
subsystem into another subsystem. So move struct resource_list_entry
from ACPI into resource core and rename it as resource_entry,
then it could be reused by different subystems and avoid the data
structure conversion.
Introduce dedicated header file resource_ext.h instead of embedding
it into ioport.h to avoid header file inclusion order issues.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
I noticed some CLOCK_TAI timer test failures on one of my
less-frequently used configurations. And after digging in I
found in 76f4108892 (Cleanup hrtimer accessors to the
timekepeing state), the hrtimer_get_softirq_time tai offset
calucation was incorrectly rewritten, as the tai offset we
return shold be from CLOCK_MONOTONIC, and not CLOCK_REALTIME.
This results in CLOCK_TAI timers expiring early on non-highres
capable machines.
This patch fixes the issue, calculating the tai time properly
from the monotonic base.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable <stable@vger.kernel.org> # 3.17+
Link: http://lkml.kernel.org/r/1423097126-10236-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rename CONFIG_LIVE_PATCHING to CONFIG_LIVEPATCH to make the naming of
the config and the code more consistent.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently the adjusments made as part of perf_event_task_tick() use the
percpu rotation lists to iterate over any active PMU contexts, but these
are not used by the context rotation code, having been replaced by
separate (per-context) hrtimer callbacks. However, some manipulation of
the rotation lists (i.e. removal of contexts) has remained in
perf_rotate_context(). This leads to the following issues:
* Contexts are not always removed from the rotation lists. Removal of
PMUs which have been placed in rotation lists, but have not been
removed by a hrtimer callback can result in corruption of the rotation
lists (when memory backing the context is freed).
This has been observed to result in hangs when PMU drivers built as
modules are inserted and removed around the creation of events for
said PMUs.
* Contexts which do not require rotation may be removed from the
rotation lists as a result of a hrtimer, and will not be considered by
the unthrottling code in perf_event_task_tick.
This patch fixes the issue by updating the rotation ist when events are
scheduled in/out, ensuring that each rotation list stays in sync with
the HW state. As each event holds a refcount on the module of its PMU,
this ensures that when a PMU module is unloaded none of its CPU contexts
can be in a rotation list. By maintaining a list of perf_event_contexts
rather than perf_event_cpu_contexts, we don't need separate paths to
handle the cpu and task contexts, which also makes the code a little
simpler.
As the rotation_list variables are not used for rotation, these are
renamed to active_ctx_list, which better matches their current function.
perf_pmu_rotate_{start,stop} are renamed to
perf_pmu_ctx_{activate,deactivate}.
Reported-by: Johannes Jensen <johannes.jensen@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Will Deacon <Will.Deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150129134511.GR17721@leverpostej
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When initialising an event, perf_init_event will call try_module_get() to
ensure that the PMU's module cannot be removed for the lifetime of the
event, with __free_event() dropping the reference when the event is
finally destroyed. If something fails after the event has been
initialised, but before the event is installed, perf_event_alloc will
drop the reference on the module.
However, if we fail to initialise an event for some reason (e.g. we ask
an uncore PMU to perform sampling, and it refuses to initialise the
event), we do not drop the refcount. If we try to open such a bogus
event without a precise IDR type, we will loop over each PMU in the pmus
list, incrementing each of their refcounts without decrementing them.
This patch adds a module_put when pmu->event_init(event) fails, ensuring
that the refcounts are balanced in failure cases. As the innards of the
precise and search based initialisation look very similar, this logic is
hoisted out into a new helper function. While the early return for the
failed try_module_get is removed from the search case, this is handled
by the remaining return when ret is not -ENOENT.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1420642611-22667-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently we flag available data (via poll syscall) on perf fd with
POLL_IN macro, which is normally used for SIGIO interface.
We've been lucky, because POLLIN (0x1) is subset of POLL_IN (0x20001)
and sys_poll (do_pollfd function) cut the extra bit out (0x20000).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1422467678-22341-1-git-send-email-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So what I suspect; but I'm in zombie mode today it seems; is that while
I initially thought that it was impossible for ctx to change when
refcount dropped to 0, I now suspect its possible.
Note that until perf_remove_from_context() the event is still active and
visible on the lists. So a concurrent sys_perf_event_open() from another
task into this task can race.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: mark.rutland@arm.com
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150129134434.GB26304@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri reported triggering the new WARN_ON_ONCE in event_sched_out over
the weekend:
event_sched_out.isra.79+0x2b9/0x2d0
group_sched_out+0x69/0xc0
ctx_sched_out+0x106/0x130
task_ctx_sched_out+0x37/0x70
__perf_install_in_context+0x70/0x1a0
remote_function+0x48/0x60
generic_exec_single+0x15b/0x1d0
smp_call_function_single+0x67/0xa0
task_function_call+0x53/0x80
perf_install_in_context+0x8b/0x110
I think the below should cure this; if we install a group leader it
will iterate the (still intact) group list and find its siblings and
try and install those too -- even though those still have the old
event->ctx -- in the new ctx.
Upon installing the first group sibling we'd try and schedule out the
group and trigger the above warn.
Fix this by installing the group leader last, installing siblings
would have no effect, they're not reachable through the group lists
and therefore we don't schedule them.
Also delay resetting the state until we're absolutely sure the events
are quiescent.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Reported-by: vincent.weaver@maine.edu
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150126162639.GA21418@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There have been a few reported issues wrt. the lack of locking around
changing event->ctx. This patch tries to address those.
It avoids the whole rwsem thing; and while it appears to work, please
give it some thought in review.
What I did fail at is sensible runtime checks on the use of
event->ctx, the RCU use makes it very hard.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150123125834.209535886@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a few WARN()s to catch things that should never happen.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150123125834.150481799@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We explicitly mark the task running after returning from
a __rt_mutex_slowlock() call, which does the actual sleeping
via wait-wake-trylocking. As such, this patch does two things:
(1) refactors the code so that setting current to TASK_RUNNING
is done by __rt_mutex_slowlock(), and not by the callers. The
downside to this is that it becomes a bit unclear when at what
point we block. As such I've added a comment that the task
blocks when calling __rt_mutex_slowlock() so readers can figure
out when it is running again.
(2) relaxes setting current's state through __set_current_state(),
instead of it's more expensive barrier alternative. There was no
need for the implied barrier as we're obviously not planning on
blocking.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1422857784.18096.1.camel@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Call __set_task_state() instead of assigning the new state
directly. These interfaces also aid CONFIG_DEBUG_ATOMIC_SLEEP
environments, keeping track of who last changed the state.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1422257769-14083-2-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The "thread would block" case can be checked without grabbing ->wait.lock.
[ If the check does not return early then grab the lock and recheck.
A memory barrier is not needed as complete() and complete_all() imply
a barrier.
The ACCESS_ONCE() is needed for calls in a loop that, if inlined, could
optimize out the re-fetching of x->done. ]
Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1422013307-13200-1-git-send-email-der.herr@hofr.at
Signed-off-by: Ingo Molnar <mingo@kernel.org>
By the time we wake up and get the lock after being asleep
in the slowpath, we better be running. As good practice,
be explicit about this and avoid any mischief.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1421717961.4903.11.camel@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The second 'mutex' shouldn't be there, it can't be about the mutex,
as the mutex can't be freed, but unlocked, the memory where the
mutex resides however, can be freed.
Signed-off-by: Sharon Dvir <sharon.dvir1@mail.huji.ac.il>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1422827252-31363-1-git-send-email-sharon.dvir1@mail.huji.ac.il
Signed-off-by: Ingo Molnar <mingo@kernel.org>
__schedule() disables preemption during its job and re-enables it
afterward without doing a preemption check to avoid recursion.
But if an event happens after the context switch which requires
rescheduling, we need to check again if a task of a higher priority
needs the CPU. A preempt irq can raise such a situation. To handle that,
__schedule() loops on need_resched().
But preempt_schedule_*() functions, which call __schedule(), also loop
on need_resched() to handle missed preempt irqs. Hence we end up with
the same loop happening twice.
Lets simplify that by attributing the need_resched() loop responsibility
to all __schedule() callers.
There is a risk that the outer loop now handles reschedules that used
to be handled by the inner loop with the added overhead of caller details
(inc/dec of PREEMPT_ACTIVE, irq save/restore) but assuming those inner
rescheduling loop weren't too frequent, this shouldn't matter. Especially
since the whole preemption path is now losing one loop in any case.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1422404652-29067-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
cpu_active_mask is rarely changed (only on hotplug), so remove this
operation to gain a little performance.
If there is a change in cpu_active_mask, rq_online_dl() and
rq_offline_dl() should take care of it normally, so cpudl::free_cpus
carries enough information for us.
For the rare case when a task is put onto a dying cpu (which
rq_offline_dl() can't handle in a timely fashion), it will be
handled through _cpu_down()->...->multi_cpu_stop()->migration_call()
->migrate_tasks(), preventing the task from hanging on the
dead cpu.
Cc: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
[peterz: changelog]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1421642980-10045-2-git-send-email-pang.xunlei@linaro.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The commit 177ef2a631 ("sched/deadline: Fix a precision problem in
the microseconds range") forgot to change the UP version of
hrtick_start(), do so now.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Fixes: 177ef2a631 ("sched/deadline: Fix a precision problem in the microseconds range")
[ Fixed the changelog. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Kirill Tkhai <ktkhai@parallels.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1416962647-76792-7-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is no need to dequeue/enqueue and push/pull if there are
no scheduling parameters changed for the DL class.
Both fair and RT classes already check if parameters changed for
them to avoid unnecessary overhead. This patch add the parameters
changed test for the DL class in order to reduce overhead.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
[ Fixed up the changelog. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Kirill Tkhai <ktkhai@parallels.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1416962647-76792-5-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When we fail to start the deadline timer in update_curr_dl(), we
forget to clear ->dl_yielded, resulting in wrecked time keeping.
Since the natural place to clear both ->dl_yielded and ->dl_throttled
is in replenish_dl_entity(); both are after all waiting for that event;
make it so.
Luckily since 67dfa1b756 ("sched/deadline: Implement
cancel_dl_timer() to use in switched_from_dl()") the
task_on_rq_queued() condition in dl_task_timer() must be true, and can
therefore call enqueue_task_dl() unconditionally.
Reported-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kirill Tkhai <ktkhai@parallels.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1416962647-76792-4-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After update_curr_dl() the current task might not be the leftmost task
anymore. In that case do not start a new hrtick for it.
In this case NEED_RESCHED will be set and the next schedule will start
the hrtick for the new task if and when appropriate.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Acked-by: Juri Lelli <juri.lelli@arm.com>
[ Rewrote the changelog and comment. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kirill Tkhai <ktkhai@parallels.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1416962647-76792-2-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 67dfa1b756 ("sched/deadline: Implement cancel_dl_timer() to
use in switched_from_dl()") removed the hrtimer_try_cancel() function
call out from init_dl_task_timer(), which gets called from
__setparam_dl().
The result is that we can now re-init the timer while its active --
this is bad and corrupts timer state.
Furthermore; changing the parameters of an active deadline task is
tricky in that you want to maintain guarantees, while immediately
effective change would allow one to circumvent the CBS guarantees --
this too is bad, as one (bad) task should not be able to affect the
others.
Rework things to avoid both problems. We only need to initialize the
timer once, so move that to __sched_fork() for new tasks.
Then make sure __setparam_dl() doesn't affect the current running
state but only updates the parameters used to calculate the next
scheduling period -- this guarantees the CBS functions as expected
(albeit slightly pessimistic).
This however means we need to make sure __dl_clear_params() needs to
reset the active state otherwise new (and tasks flipping between
classes) will not properly (re)compute their first instance.
Todo: close class flipping CBS hole.
Todo: implement delayed BW release.
Reported-by: Luca Abeni <luca.abeni@unitn.it>
Acked-by: Juri Lelli <juri.lelli@arm.com>
Tested-by: Luca Abeni <luca.abeni@unitn.it>
Fixes: 67dfa1b756 ("sched/deadline: Implement cancel_dl_timer() to use in switched_from_dl()")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150128140803.GF23038@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
hibernate_preallocate_memory() prints out that how many pages are
allocated, but it doesn't take into consideration the pages freed by
free_unnecessary_pages(). Therefore, it always shows the count more
than actually allocated.
Signed-off-by: Wonhong Kwon <wonhong.kwon@lge.com>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUzvgKAAoJEHm+PkMAQRiG8XQH/1qVbHI4pP0KcnzfZUHq/mXq
RuS4aJMwLm/Y6cXFraXBDaPde1A3CPtwtpob2C6giKcfu2zXGunY65haOEeJWNpX
lCbBsLkNC3oDNkygBpVr5Zd6yibaw63WBjjLnpAi7pn2G2Zm2zB8DfILWWWMb7yz
MH8ZXV+/xIYCTkjNWGWA1iMjmdYqu0PQHPeOgLsYQ+u7rxfM1zb/wHEkjqUZS6iu
IaaZv7PV2PnFYnqib/iIPYjAEDvSQ4vN/7b82zlFd2Culm9j/568KCCWUPhJTb2l
X0u4QYs49GnMTWVRa3bgYxS/nTUaE/6DeWs2y2WzqTt0/XDntVUnok0blUeDxGk=
=o2kS
-----END PGP SIGNATURE-----
Merge tag 'v3.19-rc7' into x86/asm, to refresh the branch before pulling in new changes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The top level trace array is treated a little different than the
instances, as it has to deal with more of the general tracing.
The tr->dir is the tracing directory, which is an immutable
dentry, where as the tr->dir of instances are the dentry that
was created, and can be destroyed later. These should have different
functions accessing them.
As only tracing_init_dentry() deals with the top level array, fold
the code for it into that function, and remove the trace_init_dentry_tr()
that was also used by the instances to get their directory dentry.
Add a tracing_get_dentry() to just get the tracing dir entry for
instances as well as the top level array.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
(struct perf_pmu_events_attr) is defined in include/linux/perf_event.h,
but the only "show" for it is in x86 and contains x86 specific stuff.
Make a generic one for those of us who are just using the event_str.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 8eb23b9f35 ("sched: Debug nested sleeps") added code to report
on nested sleep conditions, which we generally want to avoid because the
inner sleeping operation can re-set the thread state to TASK_RUNNING,
but that will then cause the outer sleep loop not actually sleep when it
calls schedule.
However, that's actually valid traditional behavior, with the inner
sleep being some fairly rare case (like taking a sleeping lock that
normally doesn't actually need to sleep).
And the debug code would actually change the state of the task to
TASK_RUNNING internally, which makes that kind of traditional and
working code not work at all, because now the nested sleep doesn't just
sometimes cause the outer one to not block, but will cause it to happen
every time.
In particular, it will cause the cardbus kernel daemon (pccardd) to
basically busy-loop doing scheduling, converting a laptop into a heater,
as reported by Bruno Prémont. But there may be other legacy uses of
that nested sleep model in other drivers that are also likely to never
get converted to the new model.
This fixes both cases:
- don't set TASK_RUNNING when the nested condition happens (note: even
if WARN_ONCE() only _warns_ once, the return value isn't whether the
warning happened, but whether the condition for the warning was true.
So despite the warning only happening once, the "if (WARN_ON(..))"
would trigger for every nested sleep.
- in the cases where we knowingly disable the warning by using
"sched_annotate_sleep()", don't change the task state (that is used
for all core scheduling decisions), instead use '->task_state_change'
that is used for the debugging decision itself.
(Credit for the second part of the fix goes to Oleg Nesterov: "Can't we
avoid this subtle change in behaviour DEBUG_ATOMIC_SLEEP adds?" with the
suggested change to use 'task_state_change' as part of the test)
Reported-and-bisected-by: Bruno Prémont <bonbons@linux-vserver.org>
Tested-by: Rafael J Wysocki <rjw@rjwysocki.net>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>,
Cc: Ilya Dryomov <ilya.dryomov@inktank.com>,
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>,
Cc: Davidlohr Bueso <dave@stgolabs.net>,
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also an event groups fix, two PMU driver
fixes and a CPU model variant addition"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Tighten (and fix) the grouping condition
perf/x86/intel: Add model number for Airmont
perf/rapl: Fix crash in rapl_scale()
perf/x86/intel/uncore: Move uncore_box_init() out of driver initialization
perf probe: Fix probing kretprobes
perf symbols: Introduce 'for' method to iterate over the symbols with a given name
perf probe: Do not rely on map__load() filter to find symbols
perf symbols: Introduce method to iterate symbols ordered by name
perf symbols: Return the first entry with a given name in find_by_name method
perf annotate: Fix memory leaks in LOCK handling
perf annotate: Handle ins parsing failures
perf scripting perl: Force to use stdbool
perf evlist: Remove extraneous 'was' on error message
Currently, cpudl::free_cpus contains all CPUs during init, see
cpudl_init(). When calling cpudl_find(), we have to add rd->span
to avoid selecting the cpu outside the current root domain, because
cpus_allowed cannot be depended on when performing clustered
scheduling using the cpuset, see find_later_rq().
This patch adds cpudl_set_freecpu() and cpudl_clear_freecpu() for
changing cpudl::free_cpus when doing rq_online_dl()/rq_offline_dl(),
so we can avoid the rd->span operation when calling cpudl_find()
in find_later_rq().
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1421642980-10045-1-git-send-email-pang.xunlei@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
cpu_idle_poll() is entered into when either the cpu_idle_force_poll is set or
tick_check_broadcast_expired() returns true. The exit condition from
cpu_idle_poll() is tif_need_resched().
However this does not take into account scenarios where cpu_idle_force_poll
changes or tick_check_broadcast_expired() returns false, without setting
the resched flag. So a cpu will be caught in cpu_idle_poll() needlessly,
thereby wasting power. Add an explicit check on cpu_idle_force_poll and
tick_check_broadcast_expired() to the exit condition of cpu_idle_poll()
to avoid this.
Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150121105655.15279.59626.stgit@preeti.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If an interrupt fires in cond_resched(), between the call to __schedule()
and the PREEMPT_ACTIVE count decrementation, and that interrupt sets
TIF_NEED_RESCHED, the call to preempt_schedule_irq() will be ignored
due to the PREEMPT_ACTIVE count. This kind of scenario, with irq preemption
being delayed because it's interrupting a preempt-disabled area, is
usually fixed up after preemption is re-enabled back with an explicit
call to preempt_schedule().
This is what preempt_enable() does but a raw preempt count decrement as
performed by __preempt_count_sub(PREEMPT_ACTIVE) doesn't handle delayed
preemption check. Therefore when such a race happens, the rescheduling
is going to be delayed until the next scheduler or preemption entrypoint.
This can be a problem for scheduler latency sensitive workloads.
Lets fix that by consolidating cond_resched() with preempt_schedule()
internals.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Ingo Molnar <mingo@kernel.org>
Original-patch-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1421946484-9298-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds checks that prevens futile attempts to move rt tasks
to a CPU with active tasks of equal or higher priority.
This reduces run queue lock contention and improves the performance of
a well known OLTP benchmark by 0.7%.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Shawn Bohrer <sbohrer@rgmadvisors.com>
Cc: Suruchi Kadu <suruchi.a.kadu@intel.com>
Cc: Doug Nelson<doug.nelson@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1421430374.2399.27.camel@schen9-desk2.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Export the suspend_resume tracepoint so it can be used
in loadable modules.
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If the kernel is compiled with function tracer support the -pg compile option
is passed to gcc to generate extra code into the prologue of each function.
This patch replaces the "open-coded" -pg compile flag with a CC_FLAGS_FTRACE
makefile variable which architectures can override if a different option
should be used for code generation.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The ring_buffer_producer uses 'struct timeval' to measure
its start and end times. 'struct timeval' on 32-bit systems
will have its tv_sec value overflow in year 2038 and beyond.
This patch replaces struct timeval with 'ktime_t' which uses
64-bit representation for nanoseconds.
Link: http://lkml.kernel.org/r/20150128141611.GA2701@tinar
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If a trace event contains an array, there is currently no standard
way to format this for text output. Drivers are currently hacking
around this by a) local hacks that use the trace_seq functionailty
directly, or b) just not printing that information. For fixed size
arrays, formatting of the elements can be open-coded, but this gets
cumbersome for arrays of non-trivial size.
These approaches result in non-standard content of the event format
description delivered to userspace, so userland tools needs to be
taught to understand and parse each array printing method
individually.
This patch implements a __print_array() helper that tracepoint
implementations can use instead of reinventing it. A simple C-style
syntax is used to delimit the array and its elements {like,this}.
So that the helpers can be used with large static arrays as well as
dynamic arrays, they take a pointer and element count: they can be
used with __get_dynamic_array() for use with dynamic arrays.
Link: http://lkml.kernel.org/r/1422449335-8289-2-git-send-email-javi.merino@arm.com
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
of this is an IST rework. When an IST exception interrupts user
space, we will handle it on the per-thread kernel stack instead of
on the IST stack. This sounds messy, but it actually simplifies the
IST entry/exit code, because it eliminates some ugly games we used
to play in order to handle rescheduling, signal delivery, etc on the
way out of an IST exception.
The IST rework introduces proper context tracking to IST exception
handlers. I haven't seen any bug reports, but the old code could
have incorrectly treated an IST exception handler as an RCU extended
quiescent state.
The memory failure change (included in this pull request with
Borislav and Tony's permission) eliminates a bunch of code that
is no longer needed now that user memory failure handlers are
called in process context.
Finally, this includes a few on Denys' uncontroversial and Obviously
Correct (tm) cleanups.
The IST and memory failure changes have been in -next for a while.
LKML references:
IST rework:
http://lkml.kernel.org/r/cover.1416604491.git.luto@amacapital.net
Memory failure change:
http://lkml.kernel.org/r/54ab2ffa301102cd6e@agluck-desk.sc.intel.com
Denys' cleanups:
http://lkml.kernel.org/r/1420927210-19738-1-git-send-email-dvlasenk@redhat.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUtvkFAAoJEK9N98ZeDfrkcfsIAJxZ0UBUCEDvulbqgk/iPGOa
fIpKLMowS7CpKtw6Wdc/YvAIkeHXWm1vU44Hj0TrjSrXCgVF8yCngs/xlXtOjoa1
dosXQqgqVJJ+hyui7chAEWyalLW7bEO8raq/6snhiMrhiuEkVKpEr7Fer4FVVCZL
4VALmNQQsbV+Qq4pXIhuagZC0Nt/XKi/+/cKvhS4p//q1F/TbHTz0FpDUrh0jPMh
18WFy0jWgxdkMRnSp/wJhekvdXX6PwUy5BdES9fjw8LQJZxxFpqN3Fe1kgfyzV0k
yuvEHw1hPt2aBGj3q69wQvDVyyn4OqMpRDBhk4S+GJYmVh7mFyFMN4BDMEy/EY8=
=LXVl
-----END PGP SIGNATURE-----
Merge tag 'pr-20150114-x86-entry' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux into x86/asm
Pull x86/entry enhancements from Andy Lutomirski:
" This is my accumulated x86 entry work, part 1, for 3.20. The meat
of this is an IST rework. When an IST exception interrupts user
space, we will handle it on the per-thread kernel stack instead of
on the IST stack. This sounds messy, but it actually simplifies the
IST entry/exit code, because it eliminates some ugly games we used
to play in order to handle rescheduling, signal delivery, etc on the
way out of an IST exception.
The IST rework introduces proper context tracking to IST exception
handlers. I haven't seen any bug reports, but the old code could
have incorrectly treated an IST exception handler as an RCU extended
quiescent state.
The memory failure change (included in this pull request with
Borislav and Tony's permission) eliminates a bunch of code that
is no longer needed now that user memory failure handlers are
called in process context.
Finally, this includes a few on Denys' uncontroversial and Obviously
Correct (tm) cleanups.
The IST and memory failure changes have been in -next for a while.
LKML references:
IST rework:
http://lkml.kernel.org/r/cover.1416604491.git.luto@amacapital.net
Memory failure change:
http://lkml.kernel.org/r/54ab2ffa301102cd6e@agluck-desk.sc.intel.com
Denys' cleanups:
http://lkml.kernel.org/r/1420927210-19738-1-git-send-email-dvlasenk@redhat.com
"
This tree semantically depends on and is based on the following RCU commit:
734d168013 ("rcu: Make rcu_nmi_enter() handle nesting")
... and for that reason won't be pushed upstream before the RCU bits hit Linus's tree.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The fix from 9fc81d8742 ("perf: Fix events installation during
moving group") was incomplete in that it failed to recognise that
creating a group with events for different CPUs is semantically
broken -- they cannot be co-scheduled.
Furthermore, it leads to real breakage where, when we create an event
for CPU Y and then migrate it to form a group on CPU X, the code gets
confused where the counter is programmed -- triggered in practice
as well by me via the perf fuzzer.
Fix this by tightening the rules for creating groups. Only allow
grouping of counters that can be co-scheduled in the same context.
This means for the same task and/or the same cpu.
Fixes: 9fc81d8742 ("perf: Fix events installation during moving group")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150123125834.090683288@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
At least some gcc versions - validly afaict - warn about potentially
using max_group uninitialized: There's no way the compiler can prove
that the body of the conditional where it and max_faults get set/
updated gets executed; in fact, without knowing all the details of
other scheduler code, I can't prove this either.
Generally the necessary change would appear to be to clear max_group
prior to entering the inner loop, and break out of the outer loop when
it ends up being all clear after the inner one. This, however, seems
inefficient, and afaict the same effect can be achieved by exiting the
outer loop when max_faults is still zero after the inner loop.
[ mingo: changed the solution to zero initialization: uninitialized_var()
needs to die, as it's an actively dangerous construct: if in the future
a known-proven-good piece of code is changed to have a true, buggy
uninitialized variable, the compiler warning is then supressed...
The better long term solution is to clean up the code flow, so that
even simple minded compilers (and humans!) are able to read it without
getting a headache. ]
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/54C2139202000078000588F7@mail.emea.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Conflicts:
arch/arm/boot/dts/imx6sx-sdb.dts
net/sched/cls_bpf.c
Two simple sets of overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the output-confusing newline below:
[ 0.191328]
**********************************************************
[ 0.191493] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.191586] ** **
...
Link: http://lkml.kernel.org/r/1422375440-31970-1-git-send-email-bp@alien8.de
Signed-off-by: Borislav Petkov <bp@suse.de>
[ added an extra '\n' by itself, to keep what it was suppose to do ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull networking fixes from David Miller:
1) Don't OOPS on socket AIO, from Christoph Hellwig.
2) Scheduled scans should be aborted upon RFKILL, from Emmanuel
Grumbach.
3) Fix sleep in atomic context in kvaser_usb, from Ahmed S Darwish.
4) Fix RCU locking across copy_to_user() in bpf code, from Alexei
Starovoitov.
5) Lots of crash, memory leak, short TX packet et al bug fixes in
sh_eth from Ben Hutchings.
6) Fix memory corruption in SCTP wrt. INIT collitions, from Daniel
Borkmann.
7) Fix return value logic for poll handlers in netxen, enic, and bnx2x.
From Eric Dumazet and Govindarajulu Varadarajan.
8) Header length calculation fix in mac80211 from Fred Chou.
9) mv643xx_eth doesn't handle highmem correctly in non-TSO code paths.
From Ezequiel Garcia.
10) udp_diag has bogus logic in it's hash chain skipping, copy same fix
tcp diag used. From Herbert Xu.
11) amd-xgbe programs wrong rx flow control register, from Thomas
Lendacky.
12) Fix race leading to use after free in ping receive path, from Subash
Abhinov Kasiviswanathan.
13) Cache redirect routes otherwise we can get a heavy backlog of rcu
jobs liberating DST_NOCACHE entries. From Hannes Frederic Sowa.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits)
net: don't OOPS on socket aio
stmmac: prevent probe drivers to crash kernel
bnx2x: fix napi poll return value for repoll
ipv6: replacing a rt6_info needs to purge possible propagated rt6_infos too
sh_eth: Fix DMA-API usage for RX buffers
sh_eth: Check for DMA mapping errors on transmit
sh_eth: Ensure DMA engines are stopped before freeing buffers
sh_eth: Remove RX overflow log messages
ping: Fix race in free in receive path
udp_diag: Fix socket skipping within chain
can: kvaser_usb: Fix state handling upon BUS_ERROR events
can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT
can: kvaser_usb: Send correct context to URB completion
can: kvaser_usb: Do not sleep in atomic context
ipv4: try to cache dst_entries which would cause a redirect
samples: bpf: relax test_maps check
bpf: rcu lock must not be held when calling copy_to_user()
net: sctp: fix slab corruption from use after free on INIT collisions
net: mv643xx_eth: Fix highmem support in non-TSO egress path
sh_eth: Fix serialisation of interrupt disable with interrupt & NAPI handlers
...
BUG: sleeping function called from invalid context at mm/memory.c:3732
in_atomic(): 0, irqs_disabled(): 0, pid: 671, name: test_maps
1 lock held by test_maps/671:
#0: (rcu_read_lock){......}, at: [<0000000000264190>] map_lookup_elem+0xe8/0x260
Call Trace:
([<0000000000115b7e>] show_trace+0x12e/0x150)
[<0000000000115c40>] show_stack+0xa0/0x100
[<00000000009b163c>] dump_stack+0x74/0xc8
[<000000000017424a>] ___might_sleep+0x23a/0x248
[<00000000002b58e8>] might_fault+0x70/0xe8
[<0000000000264230>] map_lookup_elem+0x188/0x260
[<0000000000264716>] SyS_bpf+0x20e/0x840
Fix it by allocating temporary buffer to store map element value.
Fixes: db20fd2b01 ("bpf: add lookup/update/delete/iterate methods to BPF maps")
Reported-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull cgroup fix from Tejun Heo:
"The lifetime rules of cgroup hierarchies always have been somewhat
counter-intuitive and cgroup core tried to enforce that hierarchies
w/o userland-visible usages must die in finite amount of time so that
the controllers can be reused for other hierarchies; unfortunately,
this can't be implemented reasonably for the memory controller - the
kmemcg part doesn't have any way to forcefully drain the existing
usages, leading to an interruptible hang if a following mount attempts
to use the controller in any way.
So, it seems like we're stuck with "hierarchies live on till they die
whenever that may be" at least for now. This pretty much confines
attaching controllers to hierarchies to before the hierarchies are
actively used by making dynamic configurations post active usages
unreliable. This has never been reliable and should be fine in
practice given how cgroups are used.
After the patch, hierarchies aren't killed if it isn't already
drained. A following mount attempt of the same mount options will
reuse the existing hierarchy. Mount attempts with differing options
will fail w/ -EBUSY"
* 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: prevent mount hang due to memory controller lifetime
Replace the old ns->bacct only with NULL and only if it still points
to acct. And assign the new value to it *before* calling acct_kill()
in acct_on(). That way we don't need to pass the new acct to acct_kill().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull x86 fixes from Thomas Gleixner:
"Hopefully the last round of fixes for 3.19
- regression fix for the LDT changes
- regression fix for XEN interrupt handling caused by the APIC
changes
- regression fixes for the PAT changes
- last minute fixes for new the MPX support
- regression fix for 32bit UP
- fix for a long standing relocation issue on 64bit tagged for stable
- functional fix for the Hyper-V clocksource tagged for stable
- downgrade of a pr_err which tends to confuse users
Looks a bit on the large side, but almost half of it are valuable
comments"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Change Fast TSC calibration failed from error to info
x86/apic: Re-enable PCI_MSI support for non-SMP X86_32
x86, mm: Change cachemode exports to non-gpl
x86, tls: Interpret an all-zero struct user_desc as "no segment"
x86, tls, ldt: Stop checking lm in LDT_empty
x86, mpx: Strictly enforce empty prctl() args
x86, mpx: Fix potential performance issue on unmaps
x86, mpx: Explicitly disable 32-bit MPX support on 64-bit kernels
x86, hyperv: Mark the Hyper-V clocksource as being continuous
x86: Don't rely on VMWare emulating PAT MSR correctly
x86, irq: Properly tag virtualization entry in /proc/interrupts
x86, boot: Skip relocs when load address unchanged
x86/xen: Override ACPI IRQ management callback __acpi_unregister_gsi
ACPI: pci: Do not clear pci_dev->irq in acpi_pci_irq_disable()
x86/xen: Treat SCI interrupt as normal GSI interrupt
Pull timer fixes from Thomas Gleixner:
"A set of small fixes:
- regression fix for exynos_mct clocksource
- trivial build fix for kona clocksource
- functional one liner fix for the sh_tmu clocksource
- two validation fixes to prevent (root only) data corruption in the
kernel via settimeofday and adjtimex. Tagged for stable"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: adjtimex: Validate the ADJ_FREQUENCY values
time: settimeofday: Validate the values of tv from user
clocksource: sh_tmu: Set cpu_possible_mask to fix SMP broadcast
clocksource: kona: fix __iomem annotation
clocksource: exynos_mct: Fix bitmask regression for exynos4_mct_write
kernel/time/hrtimer.c:444:9: sparse: symbol '__hrtimer_get_next_event' was not declared. Should it be static?
Fixes: 9bc7491906 hrtimer: Prevent stale expiry time in hrtimer_interrupt()
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: kbuild-all@01.org
Link: http://lkml.kernel.org/r/20150123121206.GA4766@snb
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ktime division optimization
* Expose a few more y2038-safe timekeeping interfaces
* RTC core changes to address y2038
Signed-off-by: John Stultz <john.stultz@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUwvXJAAoJEK8vClot3jMxTAoH/1DMT3fuVx6RFjKJ/P1abIB+
+w3cfEgEWgkSwYmuS0XHq1WppnQ0p0n1GOJcWUPiP9tTGrKcTdp5uG5qMprcga3q
XoeR8wefkyEKyH4ukStdGKQKot2Vj117TauDtVNPf2eOOBS5pqOw1dYUlwjlMtOj
45poW5ORNKmBMn90e22k8nlNSI9PebvMh9w6nzeYJWEibdyk96z2TOk1puPTvws/
ppyNzlhnKckpNb49JVxE8B4DNRpXsUV+aUxRNyRPN4OdqCGzHwIJCyEKi6+nbRyb
4HMUhfl8eRB2Iu7zHF2a2XEOqJdOjl8i1DsTwr3Vwd3crf4XkXD6WtTtGl2YKkU=
=YhDu
-----END PGP SIGNATURE-----
Merge tag 'fortglx-3.20-time' of https://git.linaro.org/people/john.stultz/linux into timers/core
Pull time updates from John Stultz for 3.20:
* ktime division optimization
* Expose a few more y2038-safe timekeeping interfaces
* RTC core changes to address y2038
rtc_set_ntp_time() uses timespec which is y2038-unsafe,
so modify to use timespec64 which is y2038-safe, then
replace rtc_time_to_tm() with rtc_time64_to_tm().
Also adjust all its call sites(only NTP uses it) accordingly.
Cc: pang.xunlei <pang.xunlei@linaro.org>
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Adds a timespec64 based getboottime64() implementation
that can be used as we convert internal users of
getboottime away from using timespecs.
Cc: pang.xunlei <pang.xunlei@linaro.org>
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
At least on ARM, do_div() is optimized to turn constant divisors into
an inline multiplication by the reciprocal value at compile time.
However this optimization is missed entirely whenever ktime_divns() is
used and the slow out-of-line division code is used all the time.
Let ktime_divns() use do_div() inline whenever the divisor is constant
and small enough. This will make things like ktime_to_us() and
ktime_to_ms() much faster.
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Nicolas Pitre <nico@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Remove the function get_safe_write_buffer() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PM QoS requests are notoriously hard to debug and made even
more so due to their highly dynamic nature. Having visibility
into the internal data representation per constraint allows
us to have much better appreciation of potential issues or
bad usage by drivers in the system.
So introduce for all classes of PM QoS, an entry in
/sys/kernel/debug/pm_qos that shall show all the current
requests as well as the snapshot of the value these requests
boil down to. For example:
==> /sys/kernel/debug/pm_qos/cpu_dma_latency <==
1: 4444: Active
2: 2000000000: Default
3: 2000000000: Default
4: 2000000000: Default
Type=Minimum, Value=4444, Requests: active=1 / total=4
==> /sys/kernel/debug/pm_qos/memory_bandwidth <==
Empty!
...
The actual value listed will have their meaning based
on the QoS it is on, the 'Type' indicates what logic
it would use to collate the information - Minimum,
Maximum, or Sum. Value is the collation of all requests.
This interface also compares the values with the defaults
for the QoS class and marks the ones that are
currently active.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Every kernel build that includes X.509 support prints out
a message like
- Including cert signing_key.x509
This may be useful for some cases, but when doing automated
build tests, it just means noise.
To hide the message, this uses '$(kecho)' for printing the
message, which means we still see it when building with V=1,
but not at the normal level or when building with 'make -s'.
Signed-off-by: Arnd Bergmann <arnd@arnd.de>
Signed-off-by: David Howells <dhowells@redhat.com>
hrtimer_interrupt() has the following subtle issue:
hrtimer_interrupt()
lock(cpu_base);
expires_next = KTIME_MAX;
expire_timers(CLOCK_MONOTONIC);
expires = get_next_timer(CLOCK_MONOTONIC);
if (expires < expires_next)
expires_next = expires;
expire_timers(CLOCK_REALTIME);
unlock(cpu_base);
wakeup()
hrtimer_start(CLOCK_MONOTONIC, newtimer);
lock(cpu_base();
expires = get_next_timer(CLOCK_REALTIME);
if (expires < expires_next)
expires_next = expires;
So because we already evaluated the next expiring timer of
CLOCK_MONOTONIC we ignore that the expiry time of newtimer might be
earlier than the overall next expiry time in hrtimer_interrupt().
To solve this, remove the caching of the next expiry value from
hrtimer_interrupt() and reevaluate all active clock bases for the next
expiry value. To avoid another code duplication, create a shared
evaluation function and use it for hrtimer_get_next_event(),
hrtimer_force_reprogram() and hrtimer_interrupt().
There is another subtlety in this mechanism:
While hrtimer_interrupt() is running, we want to avoid to touch the
hardware device because we will reprogram it anyway at the end of
hrtimer_interrupt(). This works nicely for hrtimers which get rearmed
via the HRTIMER_RESTART mechanism, because we drop out when the
callback on that CPU is running. But that fails, if a new timer gets
enqueued like in the example above.
This has another implication: While hrtimer_interrupt() is running we
refuse remote enqueueing of timers - see hrtimer_interrupt() and
hrtimer_check_target().
hrtimer_interrupt() tries to prevent this by setting cpu_base->expires
to KTIME_MAX, but that fails if a new timer gets queued.
Prevent both the hardware access and the remote enqueue
explicitely. We can loosen the restriction on the remote enqueue now
due to reevaluation of the next expiry value, but that needs a
seperate patch.
Folded in a fix from Vignesh Radhakrishnan.
Reported-and-tested-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Based-on-patch-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: vigneshr@codeaurora.org
Cc: john.stultz@linaro.org
Cc: viresh.kumar@linaro.org
Cc: fweisbec@gmail.com
Cc: cl@linux.com
Cc: stuart.w.hayes@gmail.com
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1501202049190.5526@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Problem:
The default behavior of the kernel is somewhat undesirable as all
requested interrupts end up on CPU0 after registration. A user can
run irqbalance daemon, or can manually configure smp_affinity via the
proc filesystem, but the default affinity of the interrupts for all
devices is always CPU zero, this can cause performance problems or
very heavy cpu use of only one core if not noticed and fixed by the
user.
Solution:
Enable the setting of the initial affinity directly when the driver
sets a hint.
This enabling means that kernel drivers can include an initial
affinity setting for the interrupt, instead of all interrupts starting
out life on CPU0. Of course if irqbalance is still running then the
interrupts will get moved as before.
This function is currently called by drivers in block, crypto,
infiniband, ethernet and scsi trees, but only a handful, so these will
be the devices affected by this change.
Tested on i40e, and default interrupts were spread across the CPUs
according to the hint.
drivers/block/mtip32xx/mtip32xx.c:3
drivers/block/nvme-core.c:2
drivers/crypto/qat/qat_dh895xcc/adf_isr.c:3
drivers/infiniband/hw/qib/qib_iba7322.c:2
drivers/net/ethernet/intel/i40e/i40e_main.c:3
drivers/net/ethernet/intel/i40evf/i40evf_main.c:3
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c:3
drivers/net/ethernet/mellanox/mlx4/en_cq.c:2
drivers/scsi/hpsa.c:3
drivers/scsi/lpfc/lpfc_init.c:3
drivers/scsi/megaraid/megaraid_sas_base.c:8
drivers/soc/ti/knav_qmss_acc.c:1
drivers/soc/ti/knav_qmss_queue.c:2
drivers/virtio/virtio_pci_common.c:2
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20141219012206.4220.27491.stgit@jbrandeb-cp2.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The following race exists in the smpboot percpu threads management:
CPU0 CPU1
cpu_up(2)
get_online_cpus();
smpboot_create_threads(2);
smpboot_register_percpu_thread();
for_each_online_cpu();
__smpboot_create_thread();
__cpu_up(2);
This results in a missing per cpu thread for the newly onlined cpu2 and
in a NULL pointer dereference on a consecutive offline of that cpu.
Proctect smpboot_register_percpu_thread() with get_online_cpus() to
prevent that.
[ tglx: Massaged changelog and removed the change in
smpboot_unregister_percpu_thread() because that's an
optimization and therefor not stable material. ]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1406777421-12830-1-git-send-email-laijs@cn.fujitsu.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In order to ensure that filenames are not released before the audit
subsystem is done with the strings there are a number of hacks built
into the fs and audit subsystems around getname() and putname(). To
say these hacks are "ugly" would be kind.
This patch removes the filename hackery in favor of a more
conventional reference count based approach. The diffstat below tells
most of the story; lots of audit/fs specific code is replaced with a
traditional reference count based approach that is easily understood,
even by those not familiar with the audit and/or fs subsystems.
CC: viro@zeniv.linux.org.uk
CC: linux-fsdevel@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In all likelihood there were some subtle, and perhaps not so subtle,
bugs with filename matching in audit_inode() and audit_inode_child()
for some time, however, recent changes to the audit filename code have
definitely broken the filename matching code. The breakage could
result in duplicate filenames in the audit log and other odd audit
record entries. This patch fixes the filename matching code and
restores some sanity to the filename audit records.
CC: viro@zeniv.linux.org.uk
CC: linux-fsdevel@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Enable recording of filenames in getname_kernel() and remove the
kludgy workaround in __audit_inode() now that we have proper filename
logging for kernel users.
CC: viro@zeniv.linux.org.uk
CC: linux-fsdevel@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Description from Michael Kerrisk. He suggested an identical patch
to one I had already coded up and tested.
commit fe3d197f84 "x86, mpx: On-demand kernel allocation of bounds
tables" added two new prctl() operations, PR_MPX_ENABLE_MANAGEMENT and
PR_MPX_DISABLE_MANAGEMENT. However, no checks were included to ensure
that unused arguments are zero, as is done in many existing prctl()s
and as should be done for all new prctl()s. This patch adds the
required checks.
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Suggested-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Hansen <dave@sr71.net>
Link: http://lkml.kernel.org/r/20150108223022.7F56FD13@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
First two are minor fallout from the param rework which went in this merge
window.
Next three are a series which fixes a longstanding (but never previously
reported and unlikely , so no CC stable) race between kallsyms and freeing
the init section.
Finally, a minor cleanup as our module refcount will now be -1 during
unload.
Thanks,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Kf9b
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module and param fixes from Rusty Russell:
"Surprising number of fixes this merge window :(
The first two are minor fallout from the param rework which went in
this merge window.
The next three are a series which fixes a longstanding (but never
previously reported and unlikely , so no CC stable) race between
kallsyms and freeing the init section.
Finally, a minor cleanup as our module refcount will now be -1 during
unload"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
module: make module_refcount() a signed integer.
module: fix race in kallsyms resolution during module load success.
module: remove mod arg from module_free, rename module_memfree().
module_arch_freeing_init(): new hook for archs before module->module_init freed.
param: fix uninitialized read with CONFIG_DEBUG_LOCK_ALLOC
param: initialize store function to NULL if not available.
tracing_init_dentry() will soon return NULL as a valid pointer for the
top level tracing directroy. NULL can not be used as an error value.
Instead, switch to ERR_PTR() and check the return status with
IS_ERR().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The creation of tracing files and directories is for the most part
encapsulated in helper functions in trace.c. Other files do not need to
include debugfs.h or fs.h, as they may have needed to in the past.
Remove them from the files that do not need them.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since b2052564e6 ("mm: memcontrol: continue cache reclaim from
offlined groups"), re-mounting the memory controller after using it is
very likely to hang.
The cgroup core assumes that any remaining references after deleting a
cgroup are temporary in nature, and synchroneously waits for them, but
the above-mentioned commit has left-over page cache pin its css until
it is reclaimed naturally. That being said, swap entries and charged
kernel memory have been doing the same indefinite pinning forever, the
bug is just more likely to trigger with left-over page cache.
Reparenting kernel memory is highly impractical, which leaves changing
the cgroup assumptions to reflect this: once a controller has been
mounted and used, it has internal state that is independent from mount
and cgroup lifetime. It can be unmounted and remounted, but it can't
be reconfigured during subsequent mounts.
Don't offline the controller root as long as there are any children,
dead or alive. A remount will no longer wait for these old references
to drain, it will simply mount the persistent controller state again.
Reported-by: "Suzuki K. Poulose" <Suzuki.Poulose@arm.com>
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
James Bottomley points out that it will be -1 during unload. It's
only used for diagnostics, so let's not hide that as it could be a
clue as to what's gone wrong.
Cc: Jason Wessel <jason.wessel@windriver.com>
Acked-and-documention-added-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Masami Hiramatsu <maasami.hiramatsu.pt@hitachi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fix a potentially uninitialized return value in klp_enable_func().
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull RCU updates from Paul E. McKenney:
- Documentation updates.
- Miscellaneous fixes.
- Preemptible-RCU fixes, including fixing an old bug in the
interaction of RCU priority boosting and CPU hotplug.
- SRCU updates.
- RCU CPU stall-warning updates.
- RCU torture-test updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull workqueue fix from Tejun Heo:
"The xfs folks have been running into weird and very rare lockups for
some time now. I didn't think this could have been from workqueue
side because no one else was reporting it. This time, Eric had a
kdump which we looked into and it turned out this actually was a
workqueue bug and the bug has been there since the beginning of
concurrency managed workqueue.
A worker pool ensures forward progress of the workqueues associated
with it by always having at least one worker reserved from executing
work items. When the pool is under contention, the idle one tries to
create more workers for the pool and if that doesn't succeed quickly
enough, it calls the rescuers to the pool.
This logic had a subtle race condition in an early exit path. When a
worker invokes this manager function, the function may return %false
indicating that the caller may proceed to executing work items either
because another worker is already performing the role or conditions
have changed and the pool is no longer under contention.
The latter part depended on the assumption that whether more workers
are necessary or not remains stable while the pool is locked; however,
pool->nr_running (concurrency count) may change asynchronously and it
getting bumped from zero asynchronously could send off the last idle
worker to execute work items.
The race window is fairly narrow, and, even when it gets triggered,
the pool deadlocks iff if all work items get blocked on pending work
items of the pool, which is highly unlikely but can be triggered by
xfs.
The patch removes the race window by removing the early exit path,
which doesn't server any purpose anymore anyway"
* 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix subtle pool management issue which can stall whole worker_pool
Add support for patching a function multiple times. If multiple patches
affect a function, the function in the most recently enabled patch
"wins". This enables a cumulative patch upgrade path, where each patch
is a superset of previous patches.
This requires restructuring the data a little bit. With the current
design, where each klp_func struct has its own ftrace_ops, we'd have to
unregister the old ops and then register the new ops, because
FTRACE_OPS_FL_IPMODIFY prevents us from having two ops registered for
the same function at the same time. That would leave a regression
window where the function isn't patched at all (not good for a patch
upgrade path).
This patch replaces the per-klp_func ftrace_ops with a global klp_ops
list, with one ftrace_ops per original function. A single ftrace_ops is
shared between all klp_funcs which have the same old_addr. This allows
the switch between function versions to happen instantaneously by
updating the klp_ops struct's func_stack list. The winner is the
klp_func at the top of the func_stack (front of the list).
[ jkosina@suse.cz: turn WARN_ON() into WARN_ON_ONCE() in ftrace handler to
avoid storm in pathological cases ]
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Only allow the topmost patch on the stack to be enabled or disabled, so
that patches can't be removed or added in an arbitrary order.
Suggested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Should have been removed with commit 18900909 ("audit: remove the old
depricated kernel interface").
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Change ARCH_HAVE_LIVE_PATCHING to HAVE_LIVE_PATCHING in Kconfigs. HAVE_
bools are prevalent there and we should go with the flow.
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The kallsyms routines (module_symbol_name, lookup_module_* etc) disable
preemption to walk the modules rather than taking the module_mutex:
this is because they are used for symbol resolution during oopses.
This works because there are synchronize_sched() and synchronize_rcu()
in the unload and failure paths. However, there's one case which doesn't
have that: the normal case where module loading succeeds, and we free
the init section.
We don't want a synchronize_rcu() there, because it would slow down
module loading: this bug was introduced in 2009 to speed module
loading in the first place.
Thus, we want to do the free in an RCU callback. We do this in the
simplest possible way by allocating a new rcu_head: if we put it in
the module structure we'd have to worry about that getting freed.
Reported-by: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Nothing needs the module pointer any more, and the next patch will
call it from RCU, where the module itself might no longer exist.
Removing the arg is the safest approach.
This just codifies the use of the module_alloc/module_free pattern
which ftrace and bpf use.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: x86@kernel.org
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: linux-cris-kernel@axis.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: nios2-dev@lists.rocketboards.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: sparclinux@vger.kernel.org
Cc: netdev@vger.kernel.org
Archs have been abusing module_free() to clean up their arch-specific
allocations. Since module_free() is also (ab)used by BPF and trace code,
let's keep it to simple allocations, and provide a hook called before
that.
This means that avr32, ia64, parisc and s390 no longer need to implement
their own module_free() at all. avr32 doesn't need module_finalize()
either.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linux-s390@vger.kernel.org
ignore_lockdep is uninitialized, and sysfs_attr_init() doesn't initialize
it, so memset to 0.
Reported-by: Huang Ying <ying.huang@intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This patch fixes two separate buglets in calls to futex_lock_pi():
* Eliminate unused 'detect' argument
* Change unused 'timeout' argument of FUTEX_TRYLOCK_PI to NULL
The 'detect' argument of futex_lock_pi() seems never to have been
used (when it was included with the initial PI mutex implementation
in Linux 2.6.18, all checks against its value were disabled by
ANDing against 0 (i.e., if (detect... && 0)), and with
commit 778e9a9c3e, any mention of
this argument in futex_lock_pi() went way altogether. Its presence
now serves only to confuse readers of the code, by giving the
impression that the futex() FUTEX_LOCK_PI operation actually does
use the 'val' argument. This patch removes the argument.
The futex_lock_pi() call that corresponds to FUTEX_TRYLOCK_PI includes
'timeout' as one of its arguments. This misleads the reader into thinking
that the FUTEX_TRYLOCK_PI operation does employ timeouts for some sensible
purpose; but it does not. Indeed, it cannot, because the checks at the
start of sys_futex() exclude FUTEX_TRYLOCK_PI from the set of operations
that do copy_from_user() on the timeout argument. So, in the
FUTEX_TRYLOCK_PI futex_lock_pi() call it would be simplest to change
'timeout' to 'NULL'. This patch does that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Reviewed-by: Darren Hart <darren@dvhart.com>
Link: http://lkml.kernel.org/r/54B96646.8010200@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Contrary to common expectations for an "int" return, these functions
return only a positive value -- if used correctly they cannot even
return 0 because the message header will necessarily be in the skb.
This makes the very common pattern of
if (genlmsg_end(...) < 0) { ... }
be a whole bunch of dead code. Many places also simply do
return nlmsg_end(...);
and the caller is expected to deal with it.
This also commonly (at least for me) causes errors, because it is very
common to write
if (my_function(...))
/* error condition */
and if my_function() does "return nlmsg_end()" this is of course wrong.
Additionally, there's not a single place in the kernel that actually
needs the message length returned, and if anyone needs it later then
it'll be very easy to just use skb->len there.
Remove this, and make the functions void. This removes a bunch of dead
code as described above. The patch adds lines because I did
- return nlmsg_end(...);
+ nlmsg_end(...);
+ return 0;
I could have preserved all the function's return values by returning
skb->len, but instead I've audited all the places calling the affected
functions and found that none cared. A few places actually compared
the return value with <= 0 in dump functionality, but that could just
be changed to < 0 with no change in behaviour, so I opted for the more
efficient version.
One instance of the error I've made numerous times now is also present
in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't
check for <0 or <=0 and thus broke out of the loop every single time.
I've preserved this since it will (I think) have caused the messages to
userspace to be formatted differently with just a single message for
every SKB returned to userspace. It's possible that this isn't needed
for the tools that actually use this, but I don't even know what they
are so couldn't test that changing this behaviour would be acceptable.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid overflow possibility.
[ The overflow is purely theoretical, since this is used for memory
ranges that aren't even close to using the full 64 bits, but this is
the right thing to do regardless. - Linus ]
Signed-off-by: Louis Langholtz <lou_langholtz@me.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Peter Anvin <hpa@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A worker_pool's forward progress is guaranteed by the fact that the
last idle worker assumes the manager role to create more workers and
summon the rescuers if creating workers doesn't succeed in timely
manner before proceeding to execute work items.
This manager role is implemented in manage_workers(), which indicates
whether the worker may proceed to work item execution with its return
value. This is necessary because multiple workers may contend for the
manager role, and, if there already is a manager, others should
proceed to work item execution.
Unfortunately, the function also indicates that the worker may proceed
to work item execution if need_to_create_worker() is false at the head
of the function. need_to_create_worker() tests the following
conditions.
pending work items && !nr_running && !nr_idle
The first and third conditions are protected by pool->lock and thus
won't change while holding pool->lock; however, nr_running can change
asynchronously as other workers block and resume and while it's likely
to be zero, as someone woke this worker up in the first place, some
other workers could have become runnable inbetween making it non-zero.
If this happens, manage_worker() could return false even with zero
nr_idle making the worker, the last idle one, proceed to execute work
items. If then all workers of the pool end up blocking on a resource
which can only be released by a work item which is pending on that
pool, the whole pool can deadlock as there's no one to create more
workers or summon the rescuers.
This patch fixes the problem by removing the early exit condition from
maybe_create_worker() and making manage_workers() return false iff
there's already another manager, which ensures that the last worker
doesn't start executing work items.
We can leave the early exit condition alone and just ignore the return
value but the only reason it was put there is because the
manage_workers() used to perform both creations and destructions of
workers and thus the function may be invoked while the pool is trying
to reduce the number of workers. Now that manage_workers() is called
only when more workers are needed, the only case this early exit
condition is triggered is rare race conditions rendering it pointless.
Tested with simulated workload and modified workqueue code which
trigger the pool deadlock reliably without this patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Eric Sandeen <sandeen@sandeen.net>
Link: http://lkml.kernel.org/g/54B019F4.8030009@sandeen.net
Cc: Dave Chinner <david@fromorbit.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: stable@vger.kernel.org
the mixture of function graph tracing and kprobes.
When jprobes and function graph tracing is enabled at the same time
it will crash the system.
# modprobe jprobe_example
# echo function_graph > /sys/kernel/debug/tracing/current_tracer
After the first fork (jprobe_example probes it), the system will crash.
This is due to the way jprobes copies the stack frame and does not
do a normal function return. This messes up with the function graph
tracing accounting which hijacks the return address from the stack
and replaces it with a hook function. It saves the return addresses in
a separate stack to put back the correct return address when done.
But because the jprobe functions do not do a normal return, their
stack addresses are not put back until the function they probe is called,
which means that the probed function will get the return address of
the jprobe handler instead of its own.
The simple fix here was to disable function graph tracing while the
jprobe handler is being called.
While debugging this I found two minor bugs with the function graph
tracing.
The first was about the function graph tracer sharing its function hash
with the function tracer (they both get filtered by the same input).
The changing of the set_ftrace_filter would not sync the function recording
records after a change if the function tracer was disabled but the
function graph tracer was enabled. This was due to the update only checking
one of the ops instead of the shared ops to see if they were enabled and
should perform the sync. This caused the ftrace accounting to break and
a ftrace_bug() would be triggered, disabling ftrace until a reboot.
The second was that the check to update records only checked one of the
filter hashes. It needs to test both the "filter" and "notrace" hashes.
The "filter" hash determines what functions to trace where as the "notrace"
hash determines what functions not to trace (trace all but these).
Both hashes need to be passed to the update code to find out what change
is being done during the update. This also broke the ftrace record
accounting and triggered a ftrace_bug().
This patch set also include two more fixes that were reported separately
from the kprobe issue.
One was that init_ftrace_syscalls() was called twice at boot up.
This is not a major bug, but that call performed a rather large kmalloc
(NR_syscalls * sizeof(*syscalls_metadata)). The second call made the first
one a memory leak, and wastes memory.
The other fix is a regression caused by an update in the v3.19 merge window.
The moving to enable events early, moved the enabling before PID 1 was
created. The syscall events require setting the TIF_SYSCALL_TRACEPOINT
for all tasks. But for_each_process_thread() does not include the swapper
task (PID 0), and ended up being a nop. A suggested fix was to add
the init_task() to have its flag set, but I didn't really want to mess
with PID 0 for this minor bug. Instead I disable and re-enable events again
at early_initcall() where it use to be enabled. This also handles any other
event that might have its own reg function that could break at early
boot up.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUt9vmAAoJEEjnJuOKh9ldLHEIAJ9XrPW2xMIY5yI69jT1F7pv
PkSRqENnOK0l4UulD52SvIBecQTTBcEEjao4yVGkc7DCJBOws/1LZ5gW8OfNlKjq
rMB8yaosL1tXJ1ARVPMjcQVy+228zkgTXznwEZCjku1g7LuScQ28qyXsXO7B6yiK
xKoHqKjygmM/a2aVn+8tdiVKiDp6jdmkbYicbaFT4xP7XB5DaMmIiXRHxdvW6xdR
azKrVfYiMyJqTZNt/EVSWUk2WjeaYhoXyNtvgPx515wTo/llCnzhjcsocXBtH2P/
YOtwl+1L7Z89ukV9oXqrtrUJZ6Ps7+g7I1flJuL7/1FlNGnklcP9JojD+t6HeT8=
=vkec
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fixes from Steven Rostedt:
"This holds a few fixes to the ftrace infrastructure as well as the
mixture of function graph tracing and kprobes.
When jprobes and function graph tracing is enabled at the same time it
will crash the system:
# modprobe jprobe_example
# echo function_graph > /sys/kernel/debug/tracing/current_tracer
After the first fork (jprobe_example probes it), the system will
crash.
This is due to the way jprobes copies the stack frame and does not do
a normal function return. This messes up with the function graph
tracing accounting which hijacks the return address from the stack and
replaces it with a hook function. It saves the return addresses in a
separate stack to put back the correct return address when done. But
because the jprobe functions do not do a normal return, their stack
addresses are not put back until the function they probe is called,
which means that the probed function will get the return address of
the jprobe handler instead of its own.
The simple fix here was to disable function graph tracing while the
jprobe handler is being called.
While debugging this I found two minor bugs with the function graph
tracing.
The first was about the function graph tracer sharing its function
hash with the function tracer (they both get filtered by the same
input). The changing of the set_ftrace_filter would not sync the
function recording records after a change if the function tracer was
disabled but the function graph tracer was enabled. This was due to
the update only checking one of the ops instead of the shared ops to
see if they were enabled and should perform the sync. This caused the
ftrace accounting to break and a ftrace_bug() would be triggered,
disabling ftrace until a reboot.
The second was that the check to update records only checked one of
the filter hashes. It needs to test both the "filter" and "notrace"
hashes. The "filter" hash determines what functions to trace where as
the "notrace" hash determines what functions not to trace (trace all
but these). Both hashes need to be passed to the update code to find
out what change is being done during the update. This also broke the
ftrace record accounting and triggered a ftrace_bug().
This patch set also include two more fixes that were reported
separately from the kprobe issue.
One was that init_ftrace_syscalls() was called twice at boot up. This
is not a major bug, but that call performed a rather large kmalloc
(NR_syscalls * sizeof(*syscalls_metadata)). The second call made the
first one a memory leak, and wastes memory.
The other fix is a regression caused by an update in the v3.19 merge
window. The moving to enable events early, moved the enabling before
PID 1 was created. The syscall events require setting the
TIF_SYSCALL_TRACEPOINT for all tasks. But for_each_process_thread()
does not include the swapper task (PID 0), and ended up being a nop.
A suggested fix was to add the init_task() to have its flag set, but I
didn't really want to mess with PID 0 for this minor bug. Instead I
disable and re-enable events again at early_initcall() where it use to
be enabled. This also handles any other event that might have its own
reg function that could break at early boot up"
* tag 'trace-fixes-v3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix enabling of syscall events on the command line
tracing: Remove extra call to init_ftrace_syscalls()
ftrace/jprobes/x86: Fix conflict between jprobes and function graph tracing
ftrace: Check both notrace and filter for old hash
ftrace: Fix updating of filters for shared global_ops filters
The current tiny RCU stall-warning code assumes that the jiffies counter
starts at zero, however, it is sometimes initialized to other values,
for example, -30,000. This commit therefore changes rcu_init() to
invoke reset_cpu_stall_ticks() for both flavors of RCU to initialize
the stall-warning times properly at boot.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The tiny RCU CPU stall detection depends on *rcp->curtail not being
NULL. It is however a tail pointer and thus NULL by definition. Instead we
should check rcp->rcucblist for the presence of pending callbacks which
need to be processed. With this fix INFO about the stall is printed and
jiffies_stall (jiffies at next stall) correctly updated.
Note that the check for pending callback is necessary to avoid spurious
warnings if there are no pendings callbacks.
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
[ paulmck: Fused identical "if" statements, ported to -rcu. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a message that is printed if the relevant grace-period
kthread has not been able to run for the two seconds preceding the
stall warning. (The two seconds is double the maximum interval between
successive bouts of quiescent-state forcing.)
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Although cond_resched_rcu_qs() only applies to TASKS_RCU, it is used
in places where it would be useful for it to apply to the normal RCU
flavors, rcu_preempt, rcu_sched, and rcu_bh. This is especially the
case for workloads that aggressively overload the system, particularly
those that generate large numbers of RCU updates on systems running
NO_HZ_FULL CPUs. This commit therefore communicates quiescent states
from cond_resched_rcu_qs() to the normal RCU flavors.
Note that it is unfortunately necessary to leave the old ->passed_quiesce
mechanism in place to allow quiescent states that apply to only one
flavor to be recorded. (Yes, we could decrement ->rcu_qs_ctr_snap in
that case, but that is not so good for debugging of RCU internals.)
In addition, if one of the RCU flavor's grace period has stalled, this
will invoke rcu_momentary_dyntick_idle(), resulting in a heavy-weight
quiescent state visible from other CPUs.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Merge commit from Sasha Levin fixing a bug where __this_cpu()
was used in preemptible code. ]
Recent testing has shown that under heavy load, running RCU's grace-period
kthreads at real-time priority can improve performance (according to 0day
test robot) and reduce the incidence of RCU CPU stall warnings. However,
most systems do just fine with the default non-realtime priorities for
these kthreads, and it does not make sense to expose the entire user
base to any risk stemming from this change, given that this change is
of use only to a few users running extremely heavy workloads.
Therefore, this commit allows users to specify realtime priorities
for the grace-period kthreads, but leaves them running SCHED_OTHER
by default. The realtime priority may be specified at build time
via the RCU_KTHREAD_PRIO Kconfig parameter, or at boot time via the
rcutree.kthread_prio parameter. Either way, 0 says to continue the
default SCHED_OTHER behavior and values from 1-99 specify that priority
of SCHED_FIFO behavior. Note that a value of 0 is not permitted when
the RCU_BOOST Kconfig parameter is specified.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Commit 5f893b2639 "tracing: Move enabling tracepoints to just after
rcu_init()" broke the enabling of system call events from the command
line. The reason was that the enabling of command line trace events
was moved before PID 1 started, and the syscall tracepoints require
that all tasks have the TIF_SYSCALL_TRACEPOINT flag set. But the
swapper task (pid 0) is not part of that. Since the swapper task is the
only task that is running at this early in boot, no task gets the
flag set, and the tracepoint never gets reached.
Instead of setting the swapper task flag (there should be no reason to
do that), re-enabled trace events again after the init thread (PID 1)
has been started. It requires disabling all command line events and
re-enabling them, as just enabling them again will not reset the logic
to set the TIF_SYSCALL_TRACEPOINT flag, as the syscall tracepoint will
be fooled into thinking that it was already set, and wont try setting
it again. For this reason, we must first disable it and re-enable it.
Link: http://lkml.kernel.org/r/1421188517-18312-1-git-send-email-mpe@ellerman.id.au
Link: http://lkml.kernel.org/r/20150115040506.216066449@goodmis.org
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
trace_init() calls init_ftrace_syscalls() and then calls trace_event_init()
which also calls init_ftrace_syscalls(). It makes more sense to only
call it from trace_event_init().
Calling it twice wastes memory, as it allocates the syscall events twice,
and loses the first copy of it.
Link: http://lkml.kernel.org/r/54AF53BD.5070303@huawei.com
Link: http://lkml.kernel.org/r/20150115040505.930398632@goodmis.org
Reported-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Using just the filter for checking for trampolines or regs is not enough
when updating the code against the records that represent all functions.
Both the filter hash and the notrace hash need to be checked.
To trigger this bug (using trace-cmd and perf):
# perf probe -a do_fork
# trace-cmd start -B foo -e probe
# trace-cmd record -p function_graph -n do_fork sleep 1
The trace-cmd record at the end clears the filter before it disables
function_graph tracing and then that causes the accounting of the
ftrace function records to become incorrect and causes ftrace to bug.
Link: http://lkml.kernel.org/r/20150114154329.358378039@goodmis.org
Cc: stable@vger.kernel.org
[ still need to switch old_hash_ops to old_ops_hash ]
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As the set_ftrace_filter affects both the function tracer as well as the
function graph tracer, the ops that represent each have a shared
ftrace_ops_hash structure. This allows both to be updated when the filter
files are updated.
But if function graph is enabled and the global_ops (function tracing) ops
is not, then it is possible that the filter could be changed without the
update happening for the function graph ops. This will cause the changes
to not take place and may even cause a ftrace_bug to occur as it could mess
with the trampoline accounting.
The solution is to check if the ops uses the shared global_ops filter and
if the ops itself is not enabled, to check if there's another ops that is
enabled and also shares the global_ops filter. In that case, the
modification still needs to be executed.
Link: http://lkml.kernel.org/r/20150114154329.055980438@goodmis.org
Cc: stable@vger.kernel.org # 3.17+
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Conflicts:
drivers/net/xen-netfront.c
Minor overlapping changes in xen-netfront.c, mostly to do
with some buffer management changes alongside the split
of stats into TX and RX.
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify run_ksoftirqd() by using the new cond_resched_rcu_qs() function
that conditionally reschedules, but unconditionally supplies an RCU
quiescent state. This commit is separate from the previous commit by
Calvin Owens because Calvin's approach can be backported, while this
commit cannot be. The reason that this commit cannot be backported is
that cond_resched_rcu_qs() does not always provide the needed quiescent
state in earlier kernels.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
While debugging an issue with excessive softirq usage, I encountered the
following note in commit 3e339b5dae ("softirq: Use hotplug thread
infrastructure"):
[ paulmck: Call rcu_note_context_switch() with interrupts enabled. ]
...but despite this note, the patch still calls RCU with IRQs disabled.
This seemingly innocuous change caused a significant regression in softirq
CPU usage on the sending side of a large TCP transfer (~1 GB/s): when
introducing 0.01% packet loss, the softirq usage would jump to around 25%,
spiking as high as 50%. Before the change, the usage would never exceed 5%.
Moving the call to rcu_note_context_switch() after the cond_sched() call,
as it was originally before the hotplug patch, completely eliminated this
problem.
Signed-off-by: Calvin Owens <calvinowens@fb.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
While debugging some "sleeping function called from invalid context" bug I
realized that the debugging message "Preemption disabled at:" pointed to
an incorrect function.
In particular if the last function/action that disabled preemption was
spin_lock_bh() then current->preempt_disable_ip won't be updated.
The reason for this is that __local_bh_disable_ip() will increase
preempt_count manually instead of calling preempt_count_add(), which
would handle the update correctly.
It look like the manual handling was done to work around some lockdep issue.
So add the missing update of current->preempt_disable_ip to
__local_bh_disable_ip() as well.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150107090441.GC4365@osiris
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Both mutexes and rwsems took a performance hit when we switched
over from the original mcs code to the cancelable variant (osq).
The reason being the use of smp_load_acquire() when polling for
node->locked. This is not needed as reordering is not an issue,
as such, relax the barrier semantics. Paul describes the scenario
nicely: https://lkml.org/lkml/2013/11/19/405
- If we start polling before the insertion is complete, all that
happens is that the first few polls have no chance of seeing a lock
grant.
- Ordering the polling against the initialization -- the above
xchg() is already doing that for us.
The smp_load_acquire() when unqueuing make sense. In addition,
we don't need to worry about leaking the critical region as
osq is only used internally.
This impacts both regular and large levels of concurrency,
ie on a 40 core system with a disk intensive workload:
disk-1 804.83 ( 0.00%) 828.16 ( 2.90%)
disk-61 8063.45 ( 0.00%) 18181.82 (125.48%)
disk-121 7187.41 ( 0.00%) 20119.17 (179.92%)
disk-181 6933.32 ( 0.00%) 20509.91 (195.82%)
disk-241 6850.81 ( 0.00%) 20397.80 (197.74%)
disk-301 6815.22 ( 0.00%) 20287.58 (197.68%)
disk-361 7080.40 ( 0.00%) 20205.22 (185.37%)
disk-421 7076.13 ( 0.00%) 19957.33 (182.04%)
disk-481 7083.25 ( 0.00%) 19784.06 (179.31%)
disk-541 7038.39 ( 0.00%) 19610.92 (178.63%)
disk-601 7072.04 ( 0.00%) 19464.53 (175.23%)
disk-661 7010.97 ( 0.00%) 19348.23 (175.97%)
disk-721 7069.44 ( 0.00%) 19255.33 (172.37%)
disk-781 7007.58 ( 0.00%) 19103.14 (172.61%)
disk-841 6981.18 ( 0.00%) 18964.22 (171.65%)
disk-901 6968.47 ( 0.00%) 18826.72 (170.17%)
disk-961 6964.61 ( 0.00%) 18708.02 (168.62%)
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1420573509-24774-7-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Both Linus (most recent) and Steve (a while ago) reported that perf
related callbacks have massive stack bloat.
The problem is that software events need a pt_regs in order to
properly report the event location and unwind stack. And because we
could not assume one was present we allocated one on stack and filled
it with minimal bits required for operation.
Now, pt_regs is quite large, so this is undesirable. Furthermore it
turns out that most sites actually have a pt_regs pointer available,
making this even more onerous, as the stack space is pointless waste.
This patch addresses the problem by observing that software events
have well defined nesting semantics, therefore we can use static
per-cpu storage instead of on-stack.
Linus made the further observation that all but the scheduler callers
of perf_sw_event() have a pt_regs available, so we change the regular
perf_sw_event() to require a valid pt_regs (where it used to be
optional) and add perf_sw_event_sched() for the scheduler.
We have a scheduler specific call instead of a more generic _noregs()
like construct because we can assume non-recursion from the scheduler
and thereby simplify the code further (_noregs would have to put the
recursion context call inline in order to assertain which __perf_regs
element to use).
One last note on the implementation of perf_trace_buf_prepare(); we
allow .regs = NULL for those cases where we already have a pt_regs
pointer available and do not need another.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Javi Merino <javi.merino@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Link: http://lkml.kernel.org/r/20141216115041.GW3337@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We have two flavors of the MCS spinlock: standard and cancelable (OSQ).
While each one is independent of the other, we currently mix and match
them. This patch:
- Moves the OSQ code out of mcs_spinlock.h (which only deals with the traditional
version) into include/linux/osq_lock.h. No unnecessary code is added to the
more global header file, anything locks that make use of OSQ must include
it anyway.
- Renames mcs_spinlock.c to osq_lock.c. This file only contains osq code.
- Introduces a CONFIG_LOCK_SPIN_ON_OWNER in order to only build osq_lock
if there is support for it.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/r/1420573509-24774-5-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
... which is equivalent to the fastpath counter part.
This mainly allows getting some WW specific code out
of generic mutex paths.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1420573509-24774-4-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It serves much better if the comments are right before the osq_lock() call.
Also delete a useless comment.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1420573509-24774-3-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mark it so by renaming __mutex_lock_check_stamp().
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1420573509-24774-2-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The original purpose of rq::skip_clock_update was to avoid 'costly' clock
updates for back to back wakeup-preempt pairs. The big problem with it
has always been that the rq variable is unaware of the context and
causes indiscrimiate clock skips.
Rework the entire thing and create a sense of context by only allowing
schedule() to skip clock updates. (XXX can we measure the cost of the
added store?)
By ensuring only schedule can ever skip an update, we guarantee we're
never more than 1 tick behind on the update.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: umgwanakikbuti@gmail.com
Link: http://lkml.kernel.org/r/20150105103554.432381549@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
rq->clock{,_task} are serialized by rq->lock, verify this.
One immediate fail is the usage in scale_rt_capability, so 'annotate'
that for now, there's more 'funny' there. Maybe change rq->lock into a
raw_seqlock_t?
(Only 32-bit is affected)
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150105103554.361872747@infradead.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: umgwanakikbuti@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Search all usage of p->sched_class in sched/core.c, no one check it
before use, so it seems that every task must belong to one sched_class.
Signed-off-by: Yao Dongdong <yaodongdong@huawei.com>
[ Moved the early class assignment to make it boot. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1419835303-28958-1-git-send-email-yaodongdong@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Child has the same decay_count as parent. If it's not zero,
we add it to parent's cfs_rq->removed_load:
wake_up_new_task()->set_task_cpu()->migrate_task_rq_fair().
Child's load is a just garbade after copying of parent,
it hasn't been on cfs_rq yet, and it must not be added to
cfs_rq::removed_load in migrate_task_rq_fair().
The patch moves sched_entity::avg::decay_count intialization
in sched_fork(). So, migrate_task_rq_fair() does not change
removed_load.
Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1418644618.6074.13.camel@tkhai
Signed-off-by: Ingo Molnar <mingo@kernel.org>
"struct task_struct"->state is "volatile long" and __ffs() warns that
"Undefined if no bit exists, so code should check against 0 first."
Therefore, at expression
state = p->state ? __ffs(p->state) + 1 : 0;
in sched_show_task(), CPU might see "p->state" before "?" as "non-zero"
but "p->state" after "?" as "zero", which could result in
"state >= sizeof(stat_nam)" being true and bogus '?' is printed.
This patch changes "state" from "unsigned int" to "unsigned long" and
save "p->state" before calling __ffs(), in order to avoid potential call
to __ffs(0).
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/201412052131.GCE35924.FVHFOtLOJOMQFS@I-love.SAKURA.ne.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Sometimes a "BUG: sleeping function called from invalid context"
message is not indicative of locking problems, but is the result
of a stack overflow corrupting the thread info.
Witness http://oss.sgi.com/archives/xfs/2014-02/msg00325.html
for example, which took a few go-rounds to sort out.
If we're printing the warning, things are wonky already, and
it'd be informative to check for the stack end corruption at this
point, too.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/5490B158.4060005@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In __synchronize_entity_decay(), if "decays" happens to be zero,
se->avg.decay_count will not be zeroed, holding the positive value
assigned when dequeued last time.
This is problematic in the following case:
If this runnable task is CFS-balanced to other CPUs soon afterwards,
migrate_task_rq_fair() will treat it as a blocked task due to its
non-zero decay_count, thereby adding its load to cfs_rq->removed_load
wrongly.
Thus, we must zero se->avg.decay_count in this case as well.
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1418745509-2609-1-git-send-email-pang.xunlei@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pass the original kprobe for preparing an optimized kprobe arch-dep
part, since for some architecture (e.g. ARM32) requires the information
in original kprobe.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Pull scheduler fixes from Ingo Molnar:
"Misc fixes: group scheduling corner case fix, two deadline scheduler
fixes, effective_load() overflow fix, nested sleep fix, 6144 CPUs
system fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix RCU stall upon -ENOMEM in sched_create_group()
sched/deadline: Avoid double-accounting in case of missed deadlines
sched/deadline: Fix migration of SCHED_DEADLINE tasks
sched: Fix odd values in effective_load() calculations
sched, fanotify: Deal with nested sleeps
sched: Fix KMALLOC_MAX_SIZE overflow during cpumask allocation
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also some kernel side fixes: uncore PMU
driver fix, user regs sampling fix and an instruction decoder fix that
unbreaks PEBS precise sampling"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes
perf/x86_64: Improve user regs sampling
perf: Move task_pt_regs sampling into arch code
x86: Fix off-by-one in instruction decoder
perf hists browser: Fix segfault when showing callchain
perf callchain: Free callchains when hist entries are deleted
perf hists: Fix children sort key behavior
perf diff: Fix to sort by baseline field by default
perf list: Fix --raw-dump option
perf probe: Fix crash in dwarf_getcfi_elf
perf probe: Fix to fall back to find probe point in symbols
perf callchain: Append callchains only when requested
perf ui/tui: Print backtrace symbols when segfault occurs
perf report: Show progress bar for output resorting
Pull locking fixes from Ingo Molnar:
"A liblockdep fix and a mutex_unlock() mutex-debugging fix"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mutex: Always clear owner field upon mutex_unlock()
tools/liblockdep: Fix debug_check thinko in mutex destroy
Currently, rcutorture's Reader Batch checks measure from the end of
the previous grace period to the end of the current one. This commit
tightens up these checks by measuring from the start and end of the same
grace period. This involves adding rcu_batches_started() and friends
corresponding to the existing rcu_batches_completed() and friends.
We leave SRCU alone for the moment, as it does not yet have a way of
tracking both ends of its grace periods.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that the return type of rcu_batches_completed() and friends matches
that of the rcu_torture_ops structure's ->completed field, the wrapper
functions can be deleted. This commit carries out that deletion, while
also wiring "sched"'s ->completed field to rcu_batches_completed_sched().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The counter returned by the various ->completed functions is subject to
overflow, which means that subtracting two such counters might result
in overflow, which invokes undefined behavior in the C standard. This
commit therefore changes these functions and variables to unsigned to
avoid this undefined behavior.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Long ago, the various ->completed fields were of type long, but now are
unsigned long due to signed-integer-overflow concerns. However, the
various _batches_completed() functions remained of type long, even though
their only purpose in life is to return the corresponding ->completed
field. This patch cleans this up by changing these functions' return
types to unsigned long.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cleanups
kdb: Remove unused command flags, repeat flags and KDB_REPEAT_NONE
Fixes
kgdb/kdb: Allow access on a single core, if a CPU round up is deemed
impossible, which will allow inspection of the now "trashed" kernel
kdb: Add enable mask for the command groups
kdb: access controls to restrict sensitive commands
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=cf1c
-----END PGP SIGNATURE-----
Merge tag 'for_linus-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb
Pull kgdb/kdb fixes from Jason Wessel:
"These have been around since 3.17 and in kgdb-next for the last 9
weeks and some will go back to -stable.
Summary of changes:
Cleanups
- kdb: Remove unused command flags, repeat flags and KDB_REPEAT_NONE
Fixes
- kgdb/kdb: Allow access on a single core, if a CPU round up is
deemed impossible, which will allow inspection of the now "trashed"
kernel
- kdb: Add enable mask for the command groups
- kdb: access controls to restrict sensitive commands"
* tag 'for_linus-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
kernel/debug/debug_core.c: Logging clean-up
kgdb: timeout if secondary CPUs ignore the roundup
kdb: Allow access to sensitive commands to be restricted by default
kdb: Add enable mask for groups of commands
kdb: Categorize kdb commands (similar to SysRq categorization)
kdb: Remove KDB_REPEAT_NONE flag
kdb: Use KDB_REPEAT_* values as flags
kdb: Rename kdb_register_repeat() to kdb_register_flags()
kdb: Rename kdb_repeat_t to kdb_cmdflags_t, cmd_repeat to cmd_flags
kdb: Remove currently unused kdbtab_t->cmd_flags
When applying multiple patches to a module, if the module is loaded
after the patches are loaded, the patches are applied in reverse order:
$ insmod patch1.ko
[ 43.172992] livepatch: enabling patch 'patch1'
$ insmod patch2.ko
[ 46.571563] livepatch: enabling patch 'patch2'
$ modprobe nfsd
[ 52.888922] livepatch: applying patch 'patch2' to loading module 'nfsd'
[ 52.899847] livepatch: applying patch 'patch1' to loading module 'nfsd'
Fix the loading order by storing the klp_patches list in queue order.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
CONFIG_GCOV_FORMAT_3_4 / _4_7 / _AUTODETECT are exclusive.
Compare the CC version only when _AUTODETECT is enabled.
This change should have no impact.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Kbuild descends into kernel/gcov/ directory only when
CONFIG_GCOV_KERNEL is enabled. (See kernel/Makefile)
CONFIG_GCOV_KERNEL check can be omitted in kernel/gcov/Makefile.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Since commit 371fdc77af (kbuild: collect shorthands into
scripts/Kbuild.include), scripts/Makefile.clean includes
scripts/Kbuild.include.
The workaround and the comment block in kernel/gcov/Makefile
are no longer necessary.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The macros cc-version, cc-fullversion and ld-version take no argument.
It is not necessary to add $(call ...) to invoke them.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Helge Deller <deller@gmx.de> [parisc]
Signed-off-by: Michal Marek <mmarek@suse.cz>
Currently if DEBUG_MUTEXES is enabled, the mutex->owner field is only
cleared iff debug_locks is active. This exposes a race to other users of
the field where the mutex->owner may be still set to a stale value,
potentially upsetting mutex_spin_on_owner() among others.
References: https://bugs.freedesktop.org/show_bug.cgi?id=87955
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1420540175-30204-1-git-send-email-chris@chris-wilson.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The dl_runtime_exceeded() function is supposed to ckeck if
a SCHED_DEADLINE task must be throttled, by checking if its
current runtime is <= 0. However, it also checks if the
scheduling deadline has been missed (the current time is
larger than the current scheduling deadline), further
decreasing the runtime if this happens.
This "double accounting" is wrong:
- In case of partitioned scheduling (or single CPU), this
happens if task_tick_dl() has been called later than expected
(due to small HZ values). In this case, the current runtime is
also negative, and replenish_dl_entity() can take care of the
deadline miss by recharging the current runtime to a value smaller
than dl_runtime
- In case of global scheduling on multiple CPUs, scheduling
deadlines can be missed even if the task did not consume more
runtime than expected, hence penalizing the task is wrong
This patch fix this problem by throttling a SCHED_DEADLINE task
only when its runtime becomes negative, and not modifying the runtime
Signed-off-by: Luca Abeni <luca.abeni@unitn.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: Dario Faggioli <raistlin@linux.it>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1418813432-20797-3-git-send-email-luca.abeni@unitn.it
Signed-off-by: Ingo Molnar <mingo@kernel.org>
According to global EDF, tasks should be migrated between runqueues
without checking if their scheduling deadlines and runtimes are valid.
However, SCHED_DEADLINE currently performs such a check:
a migration happens doing:
deactivate_task(rq, next_task, 0);
set_task_cpu(next_task, later_rq->cpu);
activate_task(later_rq, next_task, 0);
which ends up calling dequeue_task_dl(), setting the new CPU, and then
calling enqueue_task_dl().
enqueue_task_dl() then calls enqueue_dl_entity(), which calls
update_dl_entity(), which can modify scheduling deadline and runtime,
breaking global EDF scheduling.
As a result, some of the properties of global EDF are not respected:
for example, a taskset {(30, 80), (40, 80), (120, 170)} scheduled on
two cores can have unbounded response times for the third task even
if 30/80+40/80+120/170 = 1.5809 < 2
This can be fixed by invoking update_dl_entity() only in case of
wakeup, or if this is a new SCHED_DEADLINE task.
Signed-off-by: Luca Abeni <luca.abeni@unitn.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: Dario Faggioli <raistlin@linux.it>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1418813432-20797-2-git-send-email-luca.abeni@unitn.it
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In effective_load, we have (long w * unsigned long tg->shares) / long W,
when w is negative, it is cast to unsigned long and hence the product is
insanely large. Fix this by casting tg->shares to long.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20141219002956.GA25405@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
