In commit 0d9c2beed1 ("wifi: mac80211: fix monitor channel
with chanctx emulation") I changed mac80211 to always have an
internal monitor_sdata to have something to have the chanctx
bound to.
However, if the driver didn't also have the WANT_MONITOR flag
this would cause mac80211 to allocate it without telling the
driver (which was intentional) but also use it for later APIs
to the driver without it ever having known about it which was
_not_ intentional.
Check through the code and only use the monitor_sdata in the
relevant places (TX, MU-MIMO follow settings, TX power, and
interface iteration) when the WANT_MONITOR flag is set.
Cc: stable@vger.kernel.org
Fixes: 0d9c2beed1 ("wifi: mac80211: fix monitor channel with chanctx emulation")
Reported-by: ZeroBeat <ZeroBeat@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219086
Tested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20240725184836.25d334157a8e.I02574086da2c5cf0e18264ce5807db6f14ffd9c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the CSA is announced with only HT elements, the AP
chandef isn't captured correctly, leading to crashes in
the later code that checks for TPE changes during CSA.
Capture the AP chandef correctly in both cases to fix
this.
Reported-by: Jouni Malinen <j@w1.fi>
Fixes: 4540568136 ("wifi: mac80211: handle TPE element during CSA")
Link: https://patch.msgid.link/20240709160851.47805f24624d.I024091f701447f7921e93bb23b46e01c2f46347d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Chanctx emulation didn't info IEEE80211_CONF_CHANGE_CHANNEL to drivers
during ieee80211_restart_hw (ieee80211_emulate_add_chanctx). It caused
non-chanctx drivers to not stand on the correct channel after recovery.
RX then behaved abnormally. Finally, disconnection/reconnection occurred.
So, set IEEE80211_CONF_CHANGE_CHANNEL when in_reconfig.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Link: https://patch.msgid.link/20240709073531.30565-1-kevin_yang@realtek.com
Cc: stable@vger.kernel.org
Fixes: 0a44dfc070 ("wifi: mac80211: simplify non-chanctx drivers")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Do not check BSS color collision in following cases
1. already under a color change
2. color change is disabled
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://patch.msgid.link/20240705074346.11228-1-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The color change finalize work might be called after the link is
stopped, which might lead to a kernel crash.
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://patch.msgid.link/20240705074326.11172-1-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Avoid reusing stale driver data when an interface is brought down and up
again. In order to avoid having to duplicate the memset in every single
driver, do it here.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20240704130947.48609-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This flag is annoying because it puts a lot of logic into mac80211
that could just as well be in the driver (only iwlmvm uses it) and
the implementation is also broken for MLO.
Remove the flag in favour of calling drv_mgd_prepare_tx() without
any conditions even for the deauth-while-assoc case. The drivers
that implement it can take the appropriate actions, which for the
only user of DEAUTH_NEED_MGD_TX_PREP (iwlmvm) is a bit more tricky
than the implementation in mac80211 is anyway, and all others have
no need and can just exit if info->was_assoc is set.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240627132527.94924bcc9c9e.I328a219e45f2e2724cd52e75bb9feee3bf21a463@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The beacon processing should be fully done in the context of the link.
This also resolves a bug with CQM handling with MLO as in such a case
the RSSI thresholds configuration is maintained in the link context and
not in the interface context.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20240627104600.bb2f0f697881.I675b6a8a186b717f3eef79113c27361fd1a7622c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
e3f02f32a0 ("ionic: fix kernel panic due to multi-buffer handling")
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When updating a channel context, the code can apply wider
bandwidth TDLS STA channel definitions to each and every
channel context used by the device, an approach that will
surely lead to problems if there is ever more than one.
Restrict the wider BW TDLS STA consideration to only TDLS
STAs that are actually related to links using the channel
context being updated.
Fixes: 0fabfaafec ("mac80211: upgrade BW of TDLS peers when possible")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240612143707.1ad989acecde.I5c75c94d95c3f4ea84f8ff4253189f4b13bad5c3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In channel switch without an additional channel context,
where the reassign logic kicks in, we also need to update
the station bandwidth and chandef minimum width correctly
to avoid having station rate control configured to wider
bandwidth than the channel context. Do that now.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240612143418.0bc3d28231b3.I51e76df86212057ca0469e235ba9bf4461cbee75@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Make ieee80211_chan_bw_change() able to use the reserved chanreq
(really the chandef part of it) for the calculations, so it can
be used _without_ applying the changes first. Remove the comment
that indicates this is required, since it no longer is. However,
this capability only gets used later.
Also, this is not ideal, we really should not different so much
between reserved and non-reserved usage, to simplify. That's a
further cleanup later though.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240612143418.1a08cf83b8cb.Ie567bb272eb25ce487651088f13ad041f549651c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We'll need this function to take a new chandef in
(some) channel switching cases, so prepare for that
by allowing that to be passed and using it if so.
Clean up the code a little bit while at it.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240612143418.772313f08b6a.If9708249e5870671e745d4c2b02e03b25092bea3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Public action extended channel switch announcement (ECSA)
frames cannot be protected well, the spec is unclear about
what should happen in the presence of stations that can
receive protected dual and stations that cannot.
Mitigate these issues by not treating public action frames
as the absolute truth, only treat them as a hint to stop
transmitting (quiet mode), and do the remainder of the CSA
handling only when receiving the next beacon (or protected
action frame) that contains the CSA; or, if it doesn't,
simply stop being quiet and continue operating normally.
This limits the exposure to malicious ECSA public action
frames, since they cannot cause a disconnect now, only a
short interruption in traffic.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240612143037.ec7ccc45903e.Ife17d55c7ecbf98060f9c52889f3c8ba48798970@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
req->n_channels must be set before req->channels[] can be used.
This patch fixes one of the issues encountered in [1].
[ 83.964255] UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:364:4
[ 83.964258] index 0 is out of range for type 'struct ieee80211_channel *[]'
[...]
[ 83.964264] Call Trace:
[ 83.964267] <TASK>
[ 83.964269] dump_stack_lvl+0x3f/0xc0
[ 83.964274] __ubsan_handle_out_of_bounds+0xec/0x110
[ 83.964278] ieee80211_prep_hw_scan+0x2db/0x4b0
[ 83.964281] __ieee80211_start_scan+0x601/0x990
[ 83.964291] nl80211_trigger_scan+0x874/0x980
[ 83.964295] genl_family_rcv_msg_doit+0xe8/0x160
[ 83.964298] genl_rcv_msg+0x240/0x270
[...]
[1] https://bugzilla.kernel.org/show_bug.cgi?id=218810
Co-authored-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Kenton Groombridge <concord@gentoo.org>
Link: https://msgid.link/20240605152218.236061-1-concord@gentoo.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's no need to have the always-zero ret variable in
the function scope, move it into the inner scope only.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605135233.eb7a24632d98.I72d7fe1da89d4b89bcfd0f5fb9057e3e69355cfe@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When e.g. wpa_supplicant sets only the MLD "sta" authorized
state, the code actually applies that change, but then returns
an error to userspace anyway because there were no changes to
the link station, and no link ID was given. However, it's not
incorrect to not have a link ID when wanting to change only
the MLD peer ("sta") state, so the code shouldn't require it.
To fix this, separate the "new_link" argument out into a new
three-state enum, because if modify is called on a link STA
only, it should return an error if no link is given or if it
doesn't exist. For modify on the MLD "sta", not having a link
ID is OK, but if there is one it should be validated.
This seems to not have mattered much as wpa_supplicant just
prints a message and continues, and the authorized state was
already set before this error return. However, in the later
code powersave recalculation etc. will be skipped, so that it
may result in never allowing powersave on MLO connections.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605135233.48e2b8af07e3.Ib9793c383fcba118c05100e024f4a11a1c3d0e85@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 3e2f544dd8 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.
Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
In this driver specifically, .ndo_get_stats64 basically points to
dev_fetch_sw_netstats(). Now it will point to dev_get_tstats64(), which
calls netdev_stats_to_stats64() and dev_fetch_sw_netstats().
netdev_stats_to_stats64() seems irrelevant for this driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://msgid.link/20240607102045.235071-2-leitao@debian.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core instead
of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Move mac80211 driver to leverage the core allocation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://msgid.link/20240607102045.235071-1-leitao@debian.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a monitor interface is started, ieee80211_recalc_offload() is
called and 802.11 encapsulation offloading support get disabled so
monitor interface could get native wifi frames directly. But when
this interface is stopped there is no need to keep the 802.11
encpasulation offloading off.
This call ieee80211_recalc_offload() when monitor interface is stopped
so 802.11 encapsulation offloading gets re-activated if possible.
Fixes: 6aea26ce5a ("mac80211: rework tx encapsulation offload API")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://msgid.link/840baab454f83718e6e16fd836ac597d924e85b9.1716048326.git.repk@triplefau.lt
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For the EHT EIRP transmit power envelope, the 320 MHz is in
the last octet, but if we've copied 4 octets (count == 3),
the next one is at index 4 not 5 (count + 2). Fix this, and
just hardcode the offset since count is always 3 here.
Fixes: 39dc8b8ea3 ("wifi: mac80211: pass parsed TPE data to drivers")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240612100533.f96c1e0fb758.I2f301c4341abb44dafd29128e7e32c66dc0e296d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have two
conflicts this time:
CONFLICT (content): Merge conflict in net/mac80211/cfg.c
CONFLICT (content): Merge conflict in drivers/net/wireless/microchip/wilc1000/netdev.c
Here are Stephen's resolutions for them:
https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au/https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au/
Major changes:
cfg80211/mac80211
* parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers
wilc1000
* read MAC address during probe to make it visible to user space
iwlwifi
* bump FW API to 91 for BZ/SC devices
* report 64-bit radiotap timestamp
* Enable P2P low latency by default
* handle Transmit Power Envelope (TPE) advertised by AP
* start using guard()
rtlwifi
* RTL8192DU support
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmZi07URHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZu3/QgAo7jyKgvpwMaNIVRLyfYCo0r3Q9wb7QPd
QeRNsftYxlWpPTJ4+Y95aZupy91Ay+RaEQXbbtl7PMIiyQrs7wb4V4Iqzedkws3t
DZsR5BitH+1BIGY0Omo0fiSB5HlWEwZGUj6inqlgKHpBtdIVTANSMjuwkdoMAV5y
ZU57axIGToySvDbRlhJQW833Nnh4KnaseA+TtyfXSaBVerzbshkjBr0d9pMBMiH9
irMQW5CW+7fbxp3OCNsKxX4eG6MFGmm/uP1hFmeYQi2qzUE4SddHMeV4I6oNKOrH
vFB+ZVmYvOjJUYsNhlCUe6Vy+EKwvmfiDWwE1egelEkgozCixJXAAQ==
=QT4C
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.11
The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have
two conflicts this time:
net/mac80211/cfg.c
https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au
drivers/net/wireless/microchip/wilc1000/netdev.c
https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au
Major changes:
cfg80211/mac80211
* parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers
wilc1000
* read MAC address during probe to make it visible to user space
iwlwifi
* bump FW API to 91 for BZ/SC devices
* report 64-bit radiotap timestamp
* enable P2P low latency by default
* handle Transmit Power Envelope (TPE) advertised by AP
* start using guard()
rtlwifi
* RTL8192DU support
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA)
support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
* tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits)
wifi: ath12k: add hw_link_id in ath12k_pdev
wifi: ath12k: add panic handler
wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity()
wifi: brcm80211: remove unused structs
wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type)
wifi: ath12k: do not process consecutive RDDM event
dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example
wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()
wifi: rtlwifi: handle return value of usb init TX/RX
wifi: rtlwifi: Enable the new rtl8192du driver
wifi: rtlwifi: Add rtl8192du/sw.c
wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg
wifi: rtlwifi: Add rtl8192du/dm.{c,h}
wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h}
wifi: rtlwifi: Add rtl8192du/rf.{c,h}
wifi: rtlwifi: Add rtl8192du/trx.{c,h}
wifi: rtlwifi: Add rtl8192du/phy.{c,h}
wifi: rtlwifi: Add rtl8192du/hw.{c,h}
wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU
wifi: rtlwifi: Add rtl8192du/table.{c,h}
...
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When testing the previous patch with CONFIG_UBSAN_BOUNDS, I've
noticed the following:
UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:372:4
index 0 is out of range for type 'struct ieee80211_channel *[]'
CPU: 0 PID: 1435 Comm: wpa_supplicant Not tainted 6.9.0+ #1
Hardware name: LENOVO 20UN005QRT/20UN005QRT <...BIOS details...>
Call Trace:
<TASK>
dump_stack_lvl+0x2d/0x90
__ubsan_handle_out_of_bounds+0xe7/0x140
? timerqueue_add+0x98/0xb0
ieee80211_prep_hw_scan+0x2db/0x480 [mac80211]
? __kmalloc+0xe1/0x470
__ieee80211_start_scan+0x541/0x760 [mac80211]
rdev_scan+0x1f/0xe0 [cfg80211]
nl80211_trigger_scan+0x9b6/0xae0 [cfg80211]
...<the rest is not too useful...>
Since '__ieee80211_start_scan()' leaves 'hw_scan_req->req.n_channels'
uninitialized, actual boundaries of 'hw_scan_req->req.channels' can't
be checked in 'ieee80211_prep_hw_scan()'. Although an initialization
of 'hw_scan_req->req.n_channels' introduces some confusion around
allocated vs. used VLA members, this shouldn't be a problem since
everything is correctly adjusted soon in 'ieee80211_prep_hw_scan()'.
Cleanup 'kmalloc()' math in '__ieee80211_start_scan()' by using the
convenient 'struct_size()' as well.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://msgid.link/20240517153332.18271-2-dmantipov@yandex.ru
[improve (imho) indentation a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the way of parsing Spatial Reuse Parameter Set element is
incorrect and some members of struct ieee80211_he_obss_pd are not assigned.
To address this issue, it must be parsed in the order of the elements of
Spatial Reuse Parameter Set defined in the IEEE Std 802.11ax specification.
The diagram of the Spatial Reuse Parameter Set element (IEEE Std 802.11ax
-2021-9.4.2.252).
-------------------------------------------------------------------------
| | | | |Non-SRG| SRG | SRG | SRG | SRG |
|Element|Length| Element | SR |OBSS PD|OBSS PD|OBSS PD| BSS |Partial|
| ID | | ID |Control| Max | Min | Max |Color | BSSID |
| | |Extension| | Offset| Offset|Offset |Bitmap|Bitmap |
-------------------------------------------------------------------------
Fixes: 1ced169cc1 ("mac80211: allow setting spatial reuse parameters from bss_conf")
Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Link: https://msgid.link/20240516021854.5682-3-quic_lingbok@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the way to check the size of Spatial Reuse IE data in the
ieee80211_parse_extension_element() is incorrect.
This is because the len variable in the ieee80211_parse_extension_element()
function is equal to the size of Spatial Reuse IE data minus one and the
value of returned by the ieee80211_he_spr_size() function is equal to
the length of Spatial Reuse IE data. So the result of the
len >= ieee80211_he_spr_size(data) statement always false.
To address this issue and make it consistent with the logic used elsewhere
with ieee80211_he_oper_size(), change the
"len >= ieee80211_he_spr_size(data)" to
“len >= ieee80211_he_spr_size(data) - 1”.
Fixes: 9d0480a7c0 ("wifi: mac80211: move element parsing to a new file")
Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Link: https://msgid.link/20240516021854.5682-2-quic_lingbok@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Original changes[1] posted is having proper changes. However, at the same
time, there was chandef puncturing changes which had a conflict with this.
While applying, two errors crept in -
a) Whitespace error.
b) Link ID being passed to channel switch started notifier function is
0. However proper link ID is present in the function.
Fix these now.
[1] https://lore.kernel.org/all/20240130140918.1172387-5-quic_adisi@quicinc.com/
Fixes: 1a96bb4e8a ("wifi: mac80211: start and finalize channel switch on link basis")
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240509032555.263933-1-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The ieee80211_sta_ps_deliver_wakeup() function takes sta->ps_lock to
synchronizes with ieee80211_tx_h_unicast_ps_buf() which is called from
softirq context. However using only spin_lock() to get sta->ps_lock in
ieee80211_sta_ps_deliver_wakeup() does not prevent softirq to execute
on this same CPU, to run ieee80211_tx_h_unicast_ps_buf() and try to
take this same lock ending in deadlock. Below is an example of rcu stall
that arises in such situation.
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 2-....: (42413413 ticks this GP) idle=b154/1/0x4000000000000000 softirq=1763/1765 fqs=21206996
rcu: (t=42586894 jiffies g=2057 q=362405 ncpus=4)
CPU: 2 PID: 719 Comm: wpa_supplicant Tainted: G W 6.4.0-02158-g1b062f552873 #742
Hardware name: RPT (r1) (DT)
pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : queued_spin_lock_slowpath+0x58/0x2d0
lr : invoke_tx_handlers_early+0x5b4/0x5c0
sp : ffff00001ef64660
x29: ffff00001ef64660 x28: ffff000009bc1070 x27: ffff000009bc0ad8
x26: ffff000009bc0900 x25: ffff00001ef647a8 x24: 0000000000000000
x23: ffff000009bc0900 x22: ffff000009bc0900 x21: ffff00000ac0e000
x20: ffff00000a279e00 x19: ffff00001ef646e8 x18: 0000000000000000
x17: ffff800016468000 x16: ffff00001ef608c0 x15: 0010533c93f64f80
x14: 0010395c9faa3946 x13: 0000000000000000 x12: 00000000fa83b2da
x11: 000000012edeceea x10: ffff0000010fbe00 x9 : 0000000000895440
x8 : 000000000010533c x7 : ffff00000ad8b740 x6 : ffff00000c350880
x5 : 0000000000000007 x4 : 0000000000000001 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00000ac0e0e8
Call trace:
queued_spin_lock_slowpath+0x58/0x2d0
ieee80211_tx+0x80/0x12c
ieee80211_tx_pending+0x110/0x278
tasklet_action_common.constprop.0+0x10c/0x144
tasklet_action+0x20/0x28
_stext+0x11c/0x284
____do_softirq+0xc/0x14
call_on_irq_stack+0x24/0x34
do_softirq_own_stack+0x18/0x20
do_softirq+0x74/0x7c
__local_bh_enable_ip+0xa0/0xa4
_ieee80211_wake_txqs+0x3b0/0x4b8
__ieee80211_wake_queue+0x12c/0x168
ieee80211_add_pending_skbs+0xec/0x138
ieee80211_sta_ps_deliver_wakeup+0x2a4/0x480
ieee80211_mps_sta_status_update.part.0+0xd8/0x11c
ieee80211_mps_sta_status_update+0x18/0x24
sta_apply_parameters+0x3bc/0x4c0
ieee80211_change_station+0x1b8/0x2dc
nl80211_set_station+0x444/0x49c
genl_family_rcv_msg_doit.isra.0+0xa4/0xfc
genl_rcv_msg+0x1b0/0x244
netlink_rcv_skb+0x38/0x10c
genl_rcv+0x34/0x48
netlink_unicast+0x254/0x2bc
netlink_sendmsg+0x190/0x3b4
____sys_sendmsg+0x1e8/0x218
___sys_sendmsg+0x68/0x8c
__sys_sendmsg+0x44/0x84
__arm64_sys_sendmsg+0x20/0x28
do_el0_svc+0x6c/0xe8
el0_svc+0x14/0x48
el0t_64_sync_handler+0xb0/0xb4
el0t_64_sync+0x14c/0x150
Using spin_lock_bh()/spin_unlock_bh() instead prevents softirq to raise
on the same CPU that is holding the lock.
Fixes: 1d147bfa64 ("mac80211: fix AP powersave TX vs. wakeup race")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://msgid.link/8e36fe07d0fbc146f89196cd47a53c8a0afe84aa.1716910344.git.repk@triplefau.lt
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With a ath9k device I can see that:
iw phy phy0 interface add mesh0 type mp
ip link set mesh0 up
iw dev mesh0 scan
Will start a scan with the Power Management bit set in the Frame Control Field.
This is because we set this bit depending on the nonpeer_pm variable of the mesh
iface sdata and when there are no active links on the interface it remains to
NL80211_MESH_POWER_UNKNOWN.
As soon as links starts to be established, it wil switch to
NL80211_MESH_POWER_ACTIVE as it is the value set by befault on the per sta
nonpeer_pm field.
As we want no power save by default, (as expressed with the per sta ini values),
lets init it to the expected default value of NL80211_MESH_POWER_ACTIVE.
Also please note that we cannot change the default value from userspace prior to
establishing a link as using NL80211_CMD_SET_MESH_CONFIG will not work before
NL80211_CMD_JOIN_MESH has been issued. So too late for our initial scan.
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Link: https://msgid.link/20240527141759.299411-1-nico.escande@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we have a HW restart in the middle of a ROC period,
then there are two cases:
- if it's a software ROC, we really don't need to do
anything, since the ROC work will still be queued
and will run later, albeit with the interruption
due to the restart;
- if it's a hardware ROC, then it may have begun or
not, if it did begin already we can only remove it
and tell userspace about that.
In both cases, this fixes the warning that would appear
in ieee80211_start_next_roc() in this case.
In the case of some drivers such as iwlwifi, the part of
restarting is never going to happen since the driver will
cancel the ROC, but flushing the work to ensure nothing
is pending here will also result in no longer being able
to trigger the warning in this case.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240523120352.f1924b5411ea.Ifc02a45a5ce23868dc7e428bad8d0e6996dd10f4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
