We later want to add fields for Firmware SW version. The current
extracted FW version is the inner FW versioning so the new name
is better and also better differentiate from the FW's SW version.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
the helper is extract_u32_until_given_char and can later be used to
also get the major/minor of the sw version.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This commit fixes a bug in Gaudi2 when freeing the scratchpad memory
in case software init fails.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Once it was decided that these security settings are to be done by FW
rather than by the driver, there's no reason to keep them in the code.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
EDMA transpose workload requires to signal for every activation.
User FW sends all the dummy signals to RD_LBW_RATE_LIM_CFG, to save
lbw bandwidth. We need the user to be able to access that register to
configure it.
Signed-off-by: Rakesh Ughreja <rughreja@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In Gaudi2 asic, PSOC RAZWI may cause in HBW or LBW. The address that
caused the error is read from HW register and printed by the Driver.
There are cases where the Driver receives an indication on PSOC
RAZWI error but the address value is zero. In that case, the indication
is a false positive.
The Driver should not "count" a PSOC RAZWI event error when the
caused the address is zeroed.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
gcc with W=1 reports
drivers/accel/habanalabs/gaudi/gaudi.c:117:19: error:
‘gaudi_irq_name’ defined but not used [-Werror=unused-const-variable=]
117 | static const char gaudi_irq_name[GAUDI_MSI_ENTRIES][GAUDI_MAX_STRING_LEN] = {
| ^~~~~~~~~~~~~~
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
ttm:
- Fix TTM build on archs where PMD_SHIFT is not constant.
qaic:
- Revert uAPI from accel/qaic.
panel:
- Improve error handling in nt35950.
- Fix double unregister in otm8009a when removing the driver.
-----BEGIN PGP SIGNATURE-----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=/auu
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-04-27' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"A bit out of routine fixes pull for rc1.
There's a build breakage on some platforms due to ttm, this has that
fix + qaic uapi removal + minor panel fixes.
ttm:
- Fix TTM build on archs where PMD_SHIFT is not constant
qaic:
- Revert uAPI from accel/qaic
panel:
- Improve error handling in nt35950
- Fix double unregister in otm8009a when removing the driver"
* tag 'drm-next-2023-04-27' of git://anongit.freedesktop.org/drm/drm:
drm/panel: novatek-nt35950: Only unregister DSI1 if it exists
drm/panel: otm8009a: Set backlight parent to panel device
drm/panel: novatek-nt35950: Improve error handling
drm/ttm: revert "Reduce the number of used allocation orders for TTM pages"
Revert "accel/qaic: Add mhi_qaic_cntl"
- New drivers
- Driver for Acbel FSB032 power supply
- Driver for StarFive JH71x0 temperature sensor
- Added support to existing drivers
- aquacomputer_d5next: Support for Aquacomputer Aquastream XT
- nct6775: Added various ASUS boards to list of boards supporting WMI
- asus-ec-sensors: ROG STRIX Z390-F GAMING, ProArt B550-Creator,
- Notable improvements
- Regulator event and sysfs notification support for PMBus drivers
- Notable cleanup:
- Constified pointers to hwmon_channel_info
- Various other minor bug fixes and improvements
-----BEGIN PGP SIGNATURE-----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=i+Fr
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers
- Driver for Acbel FSB032 power supply
- Driver for StarFive JH71x0 temperature sensor
Added support to existing drivers:
- aquacomputer_d5next: Support for Aquacomputer Aquastream XT
- nct6775: Added various ASUS boards to list of boards supporting WMI
- asus-ec-sensors: ROG STRIX Z390-F GAMING, ProArt B550-Creator,
Notable improvements:
- Regulator event and sysfs notification support for PMBus drivers
Notable cleanup:
- Constified pointers to hwmon_channel_info
.. and various other minor bug fixes and improvements"
* tag 'hwmon-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (131 commits)
hwmon: lochnagar: Remove the unneeded include <linux/i2c.h>
hwmon: (pmbus/fsp-3y) Fix functionality bitmask in FSP-3Y YM-2151E
hwmon: (adt7475) Use device_property APIs when configuring polarity
hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream XT
hwmon: (it87) Disable/enable SMBus access for IT8622E chipset
hwmon: (it87) Add calls to smbus_enable/smbus_disable as required
hwmon: (it87) Test for error in it87_update_device
hwmon: (it87) Disable SMBus access for environmental controller registers.
docs: hwmon: Add documentaion for acbel-fsg032 PSU
hwmon: (pmbus/acbel-fsg032) Add Acbel power supply
dt-bindings: trivial-devices: Add acbel,fsg032
dt-bindings: vendor-prefixes: Add prefix for acbel
hwmon: (sfctemp) Simplify error message
hwmon: (pmbus/ibm-cffps) Use default debugfs attributes and lock function
hwmon: (pmbus/core) Add lock and unlock functions
hwmon: (pmbus/core) Request threaded interrupt with IRQF_ONESHOT
hwmon: (nct6775) update ASUS WMI monitoring list A620/B760/W790
hwmon: ina2xx: add optional regulator support
dt-bindings: hwmon: ina2xx: add supply property
dt-bindings: hwmon: pwm-fan: Convert to DT schema
...
New drivers:
- add QAIC acceleration driver
dma-buf:
- constify kobj_type structs
- Reject prime DMA-Buf attachment if get_sg_table is missing.
fbdev:
- cmdline parser fixes
- implement fbdev emulation for GEM DMA drivers
- always use shadow buffer in fbdev emulation helpers
dma-fence:
- add deadline hint to fences
- signal private stub fence
core:
- improve DisplayID 2.0 and EDID parsing
- add gem eviction function + callback
- prep to convert shmem helper to GEM resv lock
- move suballocator from radeon/amdgpu to core for Xe
- HPD polling fixes
- Documentation improvements
- Add atomic enable_plane callback
- use tgid instead of pid for client tracking
- DP: Add SDP Error Detection Configuration Register
- Add prime import/export to vram-helper
- use pci aperture helpers in more drivers
panel:
- Radxa 8/10HD support
- Samsung AMD495QA01 support
- Elida KD50T048A
- Sony TD4353
- Novatek NT36523
- STARRY 2081101QFH032011-53G
- B133UAN01.0
- AUO NE135FBM-N41
i915:
- More MTL enabling
- fix s/r problems with MEI/PXP
- Implement fb_dirty for PSR,FBC,DRRS fixes
- Fix eDP+DSI dual panel systems
- Fix issue #6333: "list_add corruption" and full system lockup from
performance monitoring
- Don't use stolen memory or BAR for ring buffers on LLC platforms
- Make sure DSM size has correct 1MiB granularity on Gen12+
- Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+
- Add engine TLB invalidation for Meteorlake
- Fix GSC races on driver load/unload on Meteorlake+
- Make kobj_type structures constant
- Move fd_install after last use of fence
- wm/vblank refactoring
- display code refactoring
- Create GSC submission targeting HDCP and PXP usages on MTL+
- Enable HDCP2.x via GSC CS
- Fix context runtime accounting on sysfs fdinfo for heavy workloads
- Use i915 instead of dev_priv insied the file_priv structure
- Replace fake flex-array with flexible-array member
amdgpu:
- Make kobj structures const
- Generalize dmabuf import to work with KFD
- Add capped/uncapped workload handling for supported APUs
- Expose additional memory stats via fdinfo
- Register vga_switcheroo for apple-gmux
- Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support
- Initial DC FAM infrastructure
- Link DC backlight to connector device rather than PCI device
- Add sysfs nodes for secondary VCN clocks
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- initial GC 9.4.3 support
radeon:
- iMac fix
- convert to client based fbdev emulation
habanalabs:
- Add opcodes to the CS ioctl to allow user to stall/resume specific engines
inside Gaudi2.
- INFO ioctl the amount of device memory that the driver
and f/w reserve for themselves.
- INFO ioctl a bit-mask of the available rotator engines
- INFO ioctl the register's address of the f/w that should
be used to trigger interrupts
- INFO ioctl two new opcodes to fetch information on h/w and f/w events
- Enable graceful reset mechanism for compute-reset.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
msm:
- UBWC decoder programming rework
- SM8550, SM8450 bindings update
- uapi C++ fix
- a3xx and a4xx devfreq support
- GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
- dma-fence deadline hint support and wait-boost
- a640/650 speed bin support
cirrus:
- convert to regular atomic helpers
- add damage clipping
mediatek:
- 10-bit overlay support
- mt8195 support
- Only trigger DRM HPD events if bridge is attached
- Change the aux retries times when receiving AUX_DEFER
rockchip:
- add 4K support
vc4:
- use drm_gem_objects
virtio:
- allow KMS support to be disabled
- add damage clipping
vmwgfx:
- buffer object lifetime fixes
exynos:
- move MIPI DSI driver to drm bridge for iMX sharing
- use kernel fbdev emulation
panfrost:
- add support for mali MT81xx devices
- add speed binning support
lima:
- add usage stats
tegra:
- fbdev client conversion
vkms:
- Add primary plane positioning support
-----BEGIN PGP SIGNATURE-----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=NUEy
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"There is a new Qualcomm accel driver for their QAIC, dma-fence got a
deadline feature added, lots of refactoring around fbdev emulation,
and the usual pre-release hw enablements from AMD and Intel and fixes
everywhere.
New drivers:
- add QAIC acceleration driver
dma-buf:
- constify kobj_type structs
- Reject prime DMA-Buf attachment if get_sg_table is missing.
fbdev:
- cmdline parser fixes
- implement fbdev emulation for GEM DMA drivers
- always use shadow buffer in fbdev emulation helpers
dma-fence:
- add deadline hint to fences
- signal private stub fence
core:
- improve DisplayID 2.0 and EDID parsing
- add gem eviction function + callback
- prep to convert shmem helper to GEM resv lock
- move suballocator from radeon/amdgpu to core for Xe
- HPD polling fixes
- Documentation improvements
- Add atomic enable_plane callback
- use tgid instead of pid for client tracking
- DP: Add SDP Error Detection Configuration Register
- Add prime import/export to vram-helper
- use pci aperture helpers in more drivers
panel:
- Radxa 8/10HD support
- Samsung AMD495QA01 support
- Elida KD50T048A
- Sony TD4353
- Novatek NT36523
- STARRY 2081101QFH032011-53G
- B133UAN01.0
- AUO NE135FBM-N41
i915:
- More MTL enabling
- fix s/r problems with MEI/PXP
- Implement fb_dirty for PSR,FBC,DRRS fixes
- Fix eDP+DSI dual panel systems
- Fix issue #6333: "list_add corruption" and full system lockup from
performance monitoring
- Don't use stolen memory or BAR for ring buffers on LLC platforms
- Make sure DSM size has correct 1MiB granularity on Gen12+
- Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+
- Add engine TLB invalidation for Meteorlake
- Fix GSC races on driver load/unload on Meteorlake+
- Make kobj_type structures constant
- Move fd_install after last use of fence
- wm/vblank refactoring
- display code refactoring
- Create GSC submission targeting HDCP and PXP usages on MTL+
- Enable HDCP2.x via GSC CS
- Fix context runtime accounting on sysfs fdinfo for heavy workloads
- Use i915 instead of dev_priv insied the file_priv structure
- Replace fake flex-array with flexible-array member
amdgpu:
- Make kobj structures const
- Generalize dmabuf import to work with KFD
- Add capped/uncapped workload handling for supported APUs
- Expose additional memory stats via fdinfo
- Register vga_switcheroo for apple-gmux
- Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support
- Initial DC FAM infrastructure
- Link DC backlight to connector device rather than PCI device
- Add sysfs nodes for secondary VCN clocks
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- initial GC 9.4.3 support
radeon:
- iMac fix
- convert to client based fbdev emulation
habanalabs:
- Add opcodes to the CS ioctl to allow user to stall/resume specific
engines inside Gaudi2.
- INFO ioctl the amount of device memory that the driver and f/w
reserve for themselves.
- INFO ioctl a bit-mask of the available rotator engines
- INFO ioctl the register's address of the f/w that should be used to
trigger interrupts
- INFO ioctl two new opcodes to fetch information on h/w and f/w
events
- Enable graceful reset mechanism for compute-reset.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
msm:
- UBWC decoder programming rework
- SM8550, SM8450 bindings update
- uapi C++ fix
- a3xx and a4xx devfreq support
- GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
- dma-fence deadline hint support and wait-boost
- a640/650 speed bin support
cirrus:
- convert to regular atomic helpers
- add damage clipping
mediatek:
- 10-bit overlay support
- mt8195 support
- Only trigger DRM HPD events if bridge is attached
- Change the aux retries times when receiving AUX_DEFER
rockchip:
- add 4K support
vc4:
- use drm_gem_objects
virtio:
- allow KMS support to be disabled
- add damage clipping
vmwgfx:
- buffer object lifetime fixes
exynos:
- move MIPI DSI driver to drm bridge for iMX sharing
- use kernel fbdev emulation
panfrost:
- add support for mali MT81xx devices
- add speed binning support
lima:
- add usage stats
tegra:
- fbdev client conversion
vkms:
- Add primary plane positioning support"
* tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm: (1495 commits)
drm/i915/dp_mst: Fix active port PLL selection for secondary MST streams
drm/exynos: Implement fbdev emulation as in-kernel client
drm/exynos: Initialize fbdev DRM client
drm/exynos: Remove fb_helper from struct exynos_drm_private
drm/exynos: Remove struct exynos_drm_fbdev
drm/exynos: Remove exynos_gem from struct exynos_drm_fbdev
drm/i915: Fix memory leaks in i915 selftests
drm/i915: Make intel_get_crtc_new_encoder() less oopsy
drm/i915/gt: Avoid out-of-bounds access when loading HuC
drm/amdgpu: add some basic elements for multiple XCD case
drm/amdgpu: move vmhub out of amdgpu_ring_funcs (v4)
Revert "drm/amdgpu: enable ras for mp0 v13_0_10 on SRIOV"
drm/amdgpu: add common ip block for GC 9.4.3
drm/amd/display: Add logging when DP link training Clock recovery is Successful
drm/amdgpu: add common early init support for GC 9.4.3
drm/amdgpu: switch to v9_4_3 gfx_funcs callbacks for GC 9.4.3
drm/amd/display: Add logging when setting DP sink power state fails
drm/amdkfd: Add gfx_target_version for GC 9.4.3
drm/amdkfd: Enable HW_UPDATE_RPTR on GC 9.4.3
drm/amdgpu: reserve the old gc_11_0_*_mes.bin
...
This reverts commit 566fc96198.
This exposes a userspace API that is still under debate. Revert the
change before the uAPI gets exposed to avoid making a mistake. QAIC is
otherwise still functional.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1681307864-3782-1-git-send-email-quic_jhugo@quicinc.com
hl_sysfs_fini() is called only if hl_sysfs_init() completes
successfully. Therefore if hl_sysfs_init() fails, need to remove any
sysfs group that was added until that point.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
HW queues testing at driver load and after reset takes a substantial
amount of time.
This commit reduces the queues test time in Gaudi2 devices by running
all the tests in parallel instead of one after the other.
Time measurements on tests duration shows that the new method is almost
x100 faster than the serial approach.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There is only single eq entry for arc farm sei event which aggregates
events from the four arc farms.
Fix the code to handle this event according to this behavior.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Multi MSI interrupts aren't working in Gaudi1 and because of that,
we are only using a single MSI interrupt. Therefore, let's remove this
dead code in order to avoid confusion.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Removing redundant asic prop variable as we don't need to expose this
to common code. In addition, fix some typos.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Sending COMMS_GOTO_WFE instructs the FW's CPU to halt (WFE state).
Once sent, FW's CPU isn't expected to continue communicating with LKD.
Therefore, the stage of waiting for COMMS_STS_OK should be skipped or
else waiting for COMMS_STS_OK will simply timeout, which will trigger
unexpected behavior.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Receiving events from FW, while the device is in hard reset, causes
a warning message in Driver log. The message may point to a
problem in the Driver or FW. But It also can appear as a result
of events that have been sent from FW just before the hard reset.
In order to avoid receiving events from FW while the device is in reset
and is already in 'disabled' mode, sync the f/w events interrupt right
before setting the device to 'disabled'.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The decoder IRQ status register may have several set bits upon an
abnormal interrupt. Therefore, when setting the events mask, need to
check all bits and not using if-else.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Decoder abnormal interrupts are for errors and not for completion, so
rename the relevant work and work function to not include 'completion'.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There are rare cases of failures when cards are initialized due to
wrong values in efuse mappings that are parsed by firmware.
To help debug those cases, print (in debug level) the raw binning masks
as fetched from the firmware during device initialization.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Current mapping between HMMU event and HMMU block is wrong.
In addition the captured address in case of a page fault or
an access error is scrambled, Hence we must call the descramble
function.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
1. Rename the func to hl_get_preboot_major_minor because we also set
the extracted values in hdev fields.
2. Free the allocated string in the calling function which makes more
sense
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The register which needs to be cleared is the valid register instead
of the address.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Fix an issue in hard reset flow in which the driver didn't send a
disable pci message if there was an active compute context.
In hard reset, disable pci message should be sent no matter if
a compute context exists or not.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
The disable pci message is sent in reset device. It informs the FW not
to raise more EQs. The Driver may ignore received EQs, when the device
is in disabled mode.
The duplication happens when hard reset is scheduled during compute
reset and also performs 'escalate_reset_flow'.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
COMMS protocol is used for LKD <--> FW communication, and any
communication failure between the two might turn out to be
destructive, hence, it should be well emphasized.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
since the function might fail and we should propagate the failure.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
When the device is in disabled state, the driver isn't suppose to
receive any events from FW. Printing the event type, as part of the
message that was already printed, shall help to get more info if this
unexpected message is received.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Once a memory mapping is added to the page tables, it's followed by
a TLB invalidation request which could potentially fail (HW failure).
Removing the mapping is simply a part of this failure handling routine.
TLB invalidation failure prints were updated to be more accurate.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
HWmon core receives an array of pointers to hwmon_channel_info and it
does not modify it, thus it can be array of const pointers for safety.
This allows drivers to make them also const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Now that we have all the components of a minimum QAIC which can boot and
run an AIC100 device, add the infrastructure that allows the QAIC driver
to be built.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-8-git-send-email-quic_jhugo@quicinc.com
Some of the MHI channels for an AIC100 device need to be routed to
userspace so that userspace can communicate directly with QSM. The MHI
bus does not support this, and while the WWAN subsystem does (for the same
reasons), AIC100 is not a WWAN device. Also, MHI is not something that
other accelerators are expected to share, thus an accel subsystem function
that meets this usecase is unlikely.
Create a QAIC specific MHI userspace shim that exposes these channels.
Start with QAIC_SAHARA which is required to boot AIC100 and is consumed by
the kickstart application as documented in aic100.rst
Each AIC100 instance (currently, up to 16) in a system will create a
chardev for QAIC_SAHARA. This chardev will be found as
/dev/<mhi instance>_QAIC_SAHARA
For example - /dev/mhi0_QAIC_SAHARA
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-7-git-send-email-quic_jhugo@quicinc.com
Add the datapath component that manages BOs and submits them to running
workloads on the qaic device via the dma_bridge hardware. This allows
QAIC clients to interact with their workloads (run inferences) via the
following ioctls along with mmap():
DRM_IOCTL_QAIC_CREATE_BO
DRM_IOCTL_QAIC_MMAP_BO
DRM_IOCTL_QAIC_ATTACH_SLICE_BO
DRM_IOCTL_QAIC_EXECUTE_BO
DRM_IOCTL_QAIC_PARTIAL_EXECUTE_BO
DRM_IOCTL_QAIC_WAIT_BO
DRM_IOCTL_QAIC_PERF_STATS_BO
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-6-git-send-email-quic_jhugo@quicinc.com
Add the control path component that talks to the management processor (QSM)
to load workloads onto the AIC100 device. This implements the KMD portion
of the NNC protocol over the QAIC_CONTROL MHI channel and the
DRM_IOCTL_QAIC_MANAGE IOCTL to userspace. With this functionality, QAIC
clients are able to load, run, and cleanup their workloads on the device
but not interact with the workloads (run inferences).
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-5-git-send-email-quic_jhugo@quicinc.com
An AIC100 device contains a MHI interface with a number of different
channels for controlling different aspects of the device. The MHI
controller works with the MHI bus to enable and drive that interface.
AIC100 uses the BHI protocol in PBL to load SBL. The MHI controller
expects the SBL to be located at /lib/firmware/qcom/aic100/sbl.bin and
expects the MHI bus to manage the process of loading and sending SBL to
the device.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-4-git-send-email-quic_jhugo@quicinc.com
Add the QAIC driver uapi file and core driver file that binds to the PCIe
device. The core driver file also creates the accel device and manages
all the interconnections between the different parts of the driver.
The driver can be built as a module. If so, it will be called "qaic.ko".
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-3-git-send-email-quic_jhugo@quicinc.com
Wait for VPU to be idle in ivpu_pm_suspend_cb() before powering off
the device, so jobs are not lost and TDRs are not triggered after
resume.
Fixes: 852be13f3b ("accel/ivpu: Add PM support")
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331113603.2802515-3-stanislaw.gruszka@linux.intel.com
Currently job->done_fence is added to every BO handle within a job. If job
handle (command buffer) is shared between multiple submits, KMD will add
the fence in each of them. Then bo_wait_ioctl() executed on command buffer
will exit only when all jobs containing that handle are done.
This creates deadlock scenario for user mode driver in case when job handle
is added as dependency of another job, because bo_wait_ioctl() of first job
will wait until second job finishes, and second job can not finish before
first one.
Having fences added only to job buffer handle allows user space to execute
bo_wait_ioctl() on the job even if it's handle is submitted with other job.
Fixes: cd7272215c ("accel/ivpu: Add command buffer submission logic")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331113603.2802515-2-stanislaw.gruszka@linux.intel.com
VPU on MTL has hardware optimizations and does not require 10ms
D0 - D3hot transition delay imposed by PCI specification (PCIe
r6.0, sec 5.9.) .
The delay removal is traditionally done by adding PCI ID to
quirk_remove_d3hot_delay() in drivers/pci/quirks.c . But since
we do not need that optimization before driver probe and we
can better specify in the ivpu driver on what (future) hardware
use the optimization, we do not use quirk_remove_d3hot_delay()
for that.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403121545.2995279-1-stanislaw.gruszka@linux.intel.com
We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IPC messages transmitted to the device must be marked as
allocated - status field must be set to 1. The VPU driver
has IVPU_IPC_HDR_ALLOCATED incorrectly defined. Future VPU
firmware versions will reject all IPC messages with invalid
status and will not work with a VPU driver that is missing
this fix.
Fixes: 5d7422cfb4 ("accel/ivpu: Add IPC driver and JSM messages")
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-9-stanislaw.gruszka@linux.intel.com
The driver calculates the wrong frequency because it ignores
the workpoint config and this cause undesired power/performance
characteristics. Fix this by using the workpoint config in
the freq calculations.
Fixes: 35b137630f ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-8-stanislaw.gruszka@linux.intel.com
The support for single tile SKUs was dropped from MTL.
Note that we can still boot the VPU with 1-tile work point
config - this is independent from number of tiles present
in the VPU.
Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-7-stanislaw.gruszka@linux.intel.com
Use pci_set_power_state() to disable buttress when device is removed.
This is workaround of hardware bug that hangs the system.
Additionally not disabling buttress prevents CPU enter deeper Pkg-C
states when the driver is unloaded or fail to probe.
Fixes: 35b137630f ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-6-stanislaw.gruszka@linux.intel.com
Remove FPGA workaround on power_down to skip checking for noc
quiescent state.
Put VPU in reset before powering it down and skip manipulating
registers that are reset by the VPU reset.
This fixes power down errors where VPU is powered down just after VPU
is booted.
Fixes: 35b137630f ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-5-stanislaw.gruszka@linux.intel.com
The SSID=1 is used by the firmware as default value in
case SSID mapping is not initialized. This allows
detecting use of miss-configured memory contexts.
The future FW versions may not allow using SSID=1.
SSID=65 is valid value, number of contexts are limited
by number of available command queues, but SSID can be
any u16 value.
Fixes: 35b137630f ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-4-stanislaw.gruszka@linux.intel.com
