As reported by Randy Dunlap, having sdhci built-in and LEDs class
as a module resulted in undefined symbols. Change the code to handle
that case properly (by not having LEDs class support in sdhci).
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Add command response and card status to error
messages.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
This function sets the OCR mask bits according to provided voltage
ranges. Will be used by the mmc_spi OpenFirmware bindings.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
The latest generation of laptops are shipping with a newer
model of Ricoh chip where the firewire controller is the
primary PCI function but a cardbus controller is also present.
The existing code assumes that if a cardbus controller is,
present, then it must be the one to manipulate - but the real
rule is that you manipulate PCI function 0. This patch adds an
additional constraint that the target must be function 0.
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
CONFIG_LEDS_CLASS is defined only if led-class is built-in, otherwise
when it is a module the option is called CONFIG_LEDS_CLASS_MODULE. Led
support should also be activated in this case.
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
sg_init_one is reading a be32, annotate as such.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Use the new pci_ioremap_bar() function in drivers/mmc.
pci_ioremap_bar() just takes a pci device and a bar number, with the goal
of making it really hard to get wrong, while also having a central place
to stick sanity checks.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* 'irq-fixes-for-linus-4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sparseirq: move __weak symbols into separate compilation unit
sparseirq: work around __weak alias bug
sparseirq: fix hang with !SPARSE_IRQ
sparseirq: set lock_class for legacy irq when sparse_irq is selected
sparseirq: work around compiler optimizing away __weak functions
sparseirq: fix desc->lock init
sparseirq: do not printk when migrating IRQ descriptors
sparseirq: remove duplicated arch_early_irq_init()
irq: simplify for_each_irq_desc() usage
proc: remove ifdef CONFIG_SPARSE_IRQ from stat.c
irq: for_each_irq_desc() move to irqnr.h
hrtimer: remove #include <linux/irq.h>
This driver implements support for the watchdog functionality provided
by the Wolfson Microelectronics WM8350, a multi-function audio and
power management subsystem intended for use in embedded systems. It is
based on a driver originally written by Graeme Gregory, though it has
been extensively modified since then.
Use of a GPIO to kick the watchdog is not yet supported.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a watchdog driver for the hardware watchdog timer on the
SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset.
Tested-by: Marco Chiappero <marco@absence.it>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
The invlpg and sync walkers lack knowledge of large host sptes,
descending to non-existant pagetable level.
Stop at directory level in such case.
Fixes SMP Windows XP with hugepages.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
While most accesses to the i8259 are with the kvm mutex taken, the call
to kvm_pic_read_irq() is not. We can't easily take the kvm mutex there
since the function is called with interrupts disabled.
Fix by adding a spinlock to the virtual interrupt controller. Since we
can't send an IPI under the spinlock (we also take the same spinlock in
an irq disabled context), we defer the IPI until the spinlock is released.
Similarly, we defer irq ack notifications until after spinlock release to
avoid lock recursion.
Signed-off-by: Avi Kivity <avi@redhat.com>
The pte.g bit is meaningless if global pages are disabled; deferring
mmu page synchronization on these ptes will lead to the guest using stale
shadow ptes.
Fixes Vista x86 smp bootloader failure.
Signed-off-by: Avi Kivity <avi@redhat.com>
Anthony Xu no longer works on kvm.
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Fix kvm_arch_vcpu_ioctl_[gs]et_regs() to do something meaningful on
ia64. Old versions could never have worked since they required
pointers to be set in the ioctl payload which were never being set by
the ioctl handler for get_regs.
In addition reserve extra space for future extensions.
The change of layout of struct kvm_regs doesn't require adding a new
CAP since get/set regs never worked on ia64 until now.
This version doesn't support copying the KVM kernel stack in/out of
the kernel. This should be implemented in a seperate ioctl call if
ever needed.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by : Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
There is no point in doing the ready_for_nmi_injection/
request_nmi_window dance with user space. First, we don't do this for
in-kernel irqchip anyway, while the code path is the same as for user
space irqchip mode. And second, there is nothing to loose if a pending
NMI is overwritten by another one (in contrast to IRQs where we have to
save the number). Actually, there is even the risk of raising spurious
NMIs this way because the reason for the held-back NMI might already be
handled while processing the first one.
Therefore this patch creates a simplified user space NMI injection
interface, exporting it under KVM_CAP_USER_NMI and dropping the old
KVM_CAP_NMI capability. And this time we also take care to provide the
interface only on archs supporting NMIs via KVM (right now only x86).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
As with the kernel irqchip, don't allow an NMI to stomp over an already
injected IRQ; instead wait for the IRQ injection to be completed.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If an assigned device shares a guest irq with an emulated
device then we currently interpret an ack generated by the
emulated device as originating from the assigned device
leading to e.g. "Unbalanced enable for IRQ 4347" from the
enable_irq() in kvm_assigned_dev_ack_irq().
The fix is fairly simple - don't enable the physical device
irq unless it was previously disabled.
Of course, this can still lead to a situation where a
non-assigned device ACK can cause the physical device irq to
be reenabled before the device was serviced. However, being
level sensitive, the interrupt will merely be regenerated.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
walk_shadow assumes the caller verified validity of the pdptr pointer in
question, which is not the case for the invlpg handler.
Fixes oops during Solaris 10 install.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This changes cpus_hardware_enabled from a cpumask_t to a cpumask_var_t:
equivalent for CONFIG_CPUMASKS_OFFSTACK=n, otherwise dynamically allocated.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Avi Kivity <avi@redhat.com>
We're getting rid on on-stack cpumasks for large NR_CPUS.
1) Use cpumask_var_t/alloc_cpumask_var.
2) smp_call_function_mask -> smp_call_function_many
3) cpus_clear, cpus_empty, cpu_set -> cpumask_clear, cpumask_empty,
cpumask_set_cpu.
This actually generates slightly smaller code than the old one with
CONFIG_CPUMASKS_OFFSTACK=n. (gcc knows that cpus cannot be NULL in
that case, where cpumask_var_t is cpumask_t[1]).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi said:
> Wow, code duplication from Rusty. Things must be bad.
Something about glass houses comes to mind. But instead, a patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Avi Kivity <avi@redhat.com>
There is a race between a "close of the file descriptors" and module
unload in the kvm module.
You can easily trigger this problem by applying this debug patch:
>--- kvm.orig/virt/kvm/kvm_main.c
>+++ kvm/virt/kvm/kvm_main.c
>@@ -648,10 +648,14 @@ void kvm_free_physmem(struct kvm *kvm)
> kvm_free_physmem_slot(&kvm->memslots[i], NULL);
> }
>
>+#include <linux/delay.h>
> static void kvm_destroy_vm(struct kvm *kvm)
> {
> struct mm_struct *mm = kvm->mm;
>
>+ printk("off1\n");
>+ msleep(5000);
>+ printk("off2\n");
> spin_lock(&kvm_lock);
> list_del(&kvm->vm_list);
> spin_unlock(&kvm_lock);
and killing the userspace, followed by an rmmod.
The problem is that kvm_destroy_vm can run while the module count
is 0. That means, you can remove the module while kvm_destroy_vm
is running. But kvm_destroy_vm is part of the module text. This
causes a kerneloops. The race exists without the msleep but is much
harder to trigger.
This patch requires the fix for anon_inodes (anon_inodes: use fops->owner
for module refcount).
With this patch, we can set the owner of all anonymous KVM inodes file
operations. The VFS will then control the KVM module refcount as long as there
is an open file. kvm_destroy_vm will be called by the release function of the
last closed file - before the VFS drops the module refcount.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
There is an imbalance for anonymous inodes. If the fops->owner field is set,
the module reference count of owner is decreases on release.
("filp_close" --> "__fput" ---> "fops_put")
On the other hand, anon_inode_getfd does not increase the module reference
count of owner. This causes two problems:
- if owner is set, the module refcount goes negative
- if owner is not set, the module can be unloaded while code is running
This patch changes anon_inode_getfd to be symmetric regarding fops->owner
handling.
I have checked all existing users of anon_inode_getfd. Noone sets fops->owner,
thats why nobody has seen the module refcount negative. The refcounting was
tested with a patched and unpatched KVM module.(see patch 2/2) I also did an
epoll_open/close test.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
kvm_get_tsc_khz() currently returns the previously-calculated preset_lpj
value, but it is in loops-per-jiffy, not kHz. The current code works
correctly only when HZ=1000.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If the guest executes invlpg, peek into the pagetable and attempt to
prepopulate the shadow entry.
Also stop dirty fault updates from interfering with the fork detector.
2% improvement on RHEL3/AIM7.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Skip syncing global pages on cr3 switch (but not on cr4/cr0). This is
important for Linux 32-bit guests with PAE, where the kmap page is
marked as global.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Collapse remote TLB flushes on root sync.
kernbench is 2.7% faster on 4-way guest. Improvements have been seen
with other loads such as AIM7.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of invoking the handler directly collect pages into
an array so the caller can work with it.
Simplifies TLB flush collapsing.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The VMMCALL instruction doesn't get recognised and isn't processed
by the emulator.
This is seen on an Intel host that tries to execute the VMMCALL
instruction after a guest live migrates from an AMD host.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add emulation of shld and shrd instructions
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add the assembler code for instruction with three operands and one
operand is stored in ECX register
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add SrcOne operand type when we need to decode an implied '1' like with
regular shift instruction
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Instruction like shld has three operands, so we need to add a Src2
decode set. We start with Src2None, Src2CL, and Src2ImmByte, Src2One to
support shld/shrd and we will expand it later.
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Extend the opcode descriptor to 32 bits. This is needed by the
introduction of a new Src2 operand type.
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Right now, KVM does not remove a slot when we do a
register ioctl for size 0 (would be the expected behaviour).
Instead, we only mark it as empty, but keep all bitmaps
and allocated data structures present. It completely
nullifies our chances of reusing that same slot again
for mapping a different piece of memory.
In this patch, we destroy rmaps, and vfree() the
pointers that used to hold the dirty bitmap, rmap
and lpage_info structures.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The only significant changes were to kvmppc_exit_timing_write() and
kvmppc_exit_timing_show(), both of which were dramatically simplified.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Existing KVM statistics are either just counters (kvm_stat) reported for
KVM generally or trace based aproaches like kvm_trace.
For KVM on powerpc we had the need to track the timings of the different exit
types. While this could be achieved parsing data created with a kvm_trace
extension this adds too much overhead (at least on embedded PowerPC) slowing
down the workloads we wanted to measure.
Therefore this patch adds a in-kernel exit timing statistic to the powerpc kvm
code. These statistic is available per vm&vcpu under the kvm debugfs directory.
As this statistic is low, but still some overhead it can be enabled via a
.config entry and should be off by default.
Since this patch touched all powerpc kvm_stat code anyway this code is now
merged and simplified together with the exit timing statistic code (still
working with exit timing disabled in .config).
Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Store shadow TLB entries in memory, but only use it on host context switch
(instead of every guest entry). This improves performance for most workloads on
440 by reducing the guest TLB miss rate.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Formerly, we used to maintain a per-vcpu shadow TLB and on every entry to the
guest would load this array into the hardware TLB. This consumed 1280 bytes of
memory (64 entries of 16 bytes plus a struct page pointer each), and also
required some assembly to loop over the array on every entry.
Instead of saving a copy in memory, we can just store shadow mappings directly
into the hardware TLB, accepting that the host kernel will clobber these as
part of the normal 440 TLB round robin. When we do that we need less than half
the memory, and we have decreased the exit handling time for all guest exits,
at the cost of increased number of TLB misses because the host overwrites some
guest entries.
These savings will be increased on processors with larger TLBs or which
implement intelligent flush instructions like tlbivax (which will avoid the
need to walk arrays in software).
In addition to that and to the code simplification, we have a greater chance of
leaving other host userspace mappings in the TLB, instead of forcing all
subsequent tasks to re-fault all their mappings.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
KVM currently ignores the host's round robin TLB eviction selection, instead
maintaining its own TLB state and its own round robin index. However, by
participating in the normal 44x TLB selection, we can drop the alternate TLB
processing in KVM. This results in a significant performance improvement,
since that processing currently must be done on *every* guest exit.
Accordingly, KVM needs to be able to access and increment tlb_44x_index.
(KVM on 440 cannot be a module, so there is no need to export this symbol.)
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
KVM on 440 has always been able to handle large guest mappings with 4K host
pages -- we must, since the guest kernel uses 256MB mappings.
This patch makes KVM work when the host has large pages too (tested with 64K).
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Split out the logic corresponding to undoing assign_irq() and
clean it up a bit.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Make sure kvm_request_irq_source_id() never returns
KVM_USERSPACE_IRQ_SOURCE_ID.
Likewise, check that kvm_free_irq_source_id() never accepts
KVM_USERSPACE_IRQ_SOURCE_ID.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Set assigned_dev->irq_source_id to -1 so that we can avoid freeing
a source ID which we never allocated.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
