Commit Graph

171 Commits

Author SHA1 Message Date
Shinya Kuribayashi
d91f2cbe69 MIPS: EMMA: Move <asm/emma2rh> to <asm/emma> dir
We'll put all EMMA related headers there in the future.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:29 +00:00
Shinya Kuribayashi
cd741b604b MIPS: EMMA: Kconfig reorganization
- Move EMMA related stuff into arch/mips/emma/Kconfig
- Create CONFIG_SOC_EMMA* to handle more EMMA SoCs effectively
- Rename CONFIG_MARKEINS into CONFIG_NEC_MARKEINS

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:29 +00:00
Adrian Bunk
052ac71c4b MIPS: RB532: Fix build error
mips/pci/fixup-rc32434.c must #include <asm/mach-rc32434/irq.h>

This patch fixes the following compile error caused by
commit 606a083b1e
(MIPS: RB532: Cleanup the headers again):

<--  snip  -->

...
  CC      arch/mips/pci/fixup-rc32434.o
arch/mips/pci/fixup-rc32434.c: In function 'pcibios_map_irq':
arch/mips/pci/fixup-rc32434.c:46: error: 'GROUP4_IRQ_BASE' undeclared (first use in this function)
arch/mips/pci/fixup-rc32434.c:46: error: (Each undeclared identifier is reported only once
arch/mips/pci/fixup-rc32434.c:46: error: for each function it appears in.)
make[2]: *** [arch/mips/pci/fixup-rc32434.o] Error 1

<--  snip  -->

A virtually identical patch was also submitted by Yoichi Yuasa
<yoichi_yuasa@tripeaks.co.jp>.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:26 +00:00
Shinya Kuribayashi
08da6f1bdd MIPS: Kill unused <asm/debug.h> inclusions
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15 12:46:52 +01:00
Aurelien Jarno
540799e32e MIPS: PCI: Scan busses when they are registered
The patch below changes register_pci_controller() such that controllers
being added after pcibios_init() has run are be scanned immediately.

This is needed for example by the BCM47xx PCI controller, which is located
on the SSB bus, which is now initialized after the PCI subsystem.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15 12:46:51 +01:00
Atsushi Nemoto
0dcdbe6add MIPS: TXx9: Add TX4939 SoC support
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/pci/pci-tx4939.c
 create mode 100644 arch/mips/txx9/generic/irq_tx4939.c
 create mode 100644 arch/mips/txx9/generic/setup_tx4939.c
 create mode 100644 include/asm-mips/txx9/tx4939.h
2008-10-11 16:18:49 +01:00
Atsushi Nemoto
ee25d33f87 MIPS: TXx9: Add __init tag for tx4938_pcic1_map_irq.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:44 +01:00
Aurelien Jarno
2dc42b47a7 [MIPS] BCM47xx: Fix build error due to missing PCI functions
This patch defines pcibios_map_irq() and pcibios_plat_dev_init() for
the BCM47xx platform.

It fixes the regression introduced by commit
aab547ce0d.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-27 15:45:36 +01:00
Ralf Baechle
f4d15f1c87 [MIPS] IP27: Switch to dynamic interrupt routing avoding panic on error.
pcibios_map_irq is no way of returning an error but on IP27 an interrupt
is possibly not routable when running out of resources.  So do the
interrupt routing at pcibios_enable_device time.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-27 15:45:36 +01:00
Ralf Baechle
a571444a06 [MIPS] IP27: Export symbol pcibus_to_node to modules.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-08-26 09:10:25 +01:00
Atsushi Nemoto
455cc256eb [MIPS] TXx9: PCI error handling
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Thu, 24 Jul 2008 00:25:16 +0900
Subject: [PATCH] txx9: PCI error handling

Add more control and detailed report on PCI error interrupt.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30 21:54:38 +01:00
Atsushi Nemoto
0751752922 [MIPS] TXx9: Add some pci options
Add pci options for backplane type, clock selection, error handling,
timeout values.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30 21:54:38 +01:00
Atsushi Nemoto
47a5c97648 [MIPS] Introduce pcibios_plat_setup
Introduce pcibios_plat_setup for platform-specific pcibios_setup.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30 21:54:36 +01:00
Atsushi Nemoto
32d00d0f93 [MIPS] TXx9: PCI fixes for tx3927/tx4927
* Fix tx3927 pci ops for Type-1 configuration
* Fix abort checking of tx3927 pci ops
* Flush write buffer to avoid spurious PCI error interrupt
* Add a quirk for FPCIB backplane

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30 21:54:35 +01:00
Ralf Baechle
73b4390fb2 [MIPS] Routerboard 532: Support for base system
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-20 14:38:18 +01:00
Dmitri Vorobiev
3450004a8c [MIPS] PCI: Make the pcibios_max_latency variable static
The pcibios_max_latency variable is needlessly defined global, and this
patch makes it static.

Build-tested using malta_defconfig.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-20 14:38:17 +01:00
Thomas Bogendoerfer
b27418aa55 [MIPS] Remove mips_machtype for LASAT machines
This is the LASAT part of the mips_machtype removal.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:39 +01:00
Yoichi Yuasa
efff4ae259 [MIPS] cmbvr4133: Remove support
It cannot be built for a long time and nobody maintains it.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:36 +01:00
Atsushi Nemoto
edcaf1a6a7 [MIPS] TXx9: Make single kernel can support multiple boards
Make single kernel can be used on RBTX4927/37/38.  Also make
some SoC-specific code independent from board-specific code.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:35 +01:00
Atsushi Nemoto
89d63fe179 [MIPS] TXx9: Reorganize PCI code
Split out PCIC dependent code and SoC dependent code from board dependent
code.  Now TX4927 PCIC code is independent from TX4927/TX4938 SoC code.
Also fix some build problems on CONFIG_PCI=n.

As a bonus, "FPCIB0 Backplane Support" is available for all TX39/TX49 boards
and PCI66 support is available for all TX49 boards.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:35 +01:00
Atsushi Nemoto
22b1d707ff [MIPS] TXx9: Reorganize code
Move arch/mips/{jmr3927,tx4927,tx4938} into arch/mips/txx9/ tree.
This will help more code sharing and maintainance.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:35 +01:00
Ralf Baechle
2157bc6871 [MIPS] Atlas: Remove support code.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:33 +01:00
Atsushi Nemoto
b29eee4935 [MIPS] rbtx4927: misc cleanups
* Merge tx4927_pci.h into tx4927.h
* Kill (broken) external PCI clock frequency reporting
* Kill unnecessary wbflush()
* Kill unnecessary includes
* Kill debug garbages

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:32 +01:00
Atsushi Nemoto
af3e69cfc9 [MIPS] Declare some pci variables in header file
Declare pci_probe_only, etc. in asm-mips/pci.h file.  This will fix
some sparse warnings.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:32 +01:00
Dmitri Vorobiev
d58eaab5a0 [MIPS] Namespace clean-up in arch/mips/pci/pci.c
The following symbols

	hose_head
	hose_tail

are needlessly defined global in arch/mips/pci/pci.c, and
this patch makes them static.

The variable pci_isa_hose is not used, and is removed by
this patch.

Spotted by namespacecheck. Tested by booting a Malta 4Kc
board up to the shell prompt.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:31 +01:00
Thomas Bogendoerfer
8736595bb2 [MIPS] Enable FAST-20 for onboard scsi
Both onboard controller of the O2 support FAST-20 transfer speeds,
but the bit, which signals that to the aic driver, isn't set. Instead
of adding detection code to the scsi driver, we just fake the missing
bit in the PCI config space of the scsi chips.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:31 +01:00
Maciej W. Rozycki
c88a8b4ab0 [MIPS] Remove obsolete isa_slot_offset
The isa_slot_offset variable and its __ISA_IO_base macro is not used
anywhere anymore.  It does not look like a decent interface per today's
standards either.  Remove both including all places of initialization.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:29 +01:00
Yoichi Yuasa
f1304b358a [MIPS] Vr41xx: Initialize PCI io_map_base
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-06-16 15:14:48 +01:00
Maciej W. Rozycki
d0f9cbd4b2 [MIPS] SB1250: Initialize io_map_base
Correctly initialize io_map_base for the SB1250 PCI controller as required
for proper iomap support.  Based on a proposal from Daniel Jacobowitz.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-06-16 15:14:46 +01:00
Thomas Bogendoerfer
96173a6c4e [MIPS] IP27: misc fixes
- fix PCI interrupt assignment by emulating ioc3 interrupt pin register
- use pci_probe_only mode
- select correct page size in bridge
- remove no longer needed ioc3_sio_init() code

[Ralf: Fix for 64kB or larger pagesizes]

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-06-05 18:13:15 +01:00
Sergei Shtylyov
a9633279cf [MIPS] Alchemy PCI code style cleanup
Fix 15 errors and 4 warnings given by checkpatch.pl:

- space between the asterisk and variable name;

- space after opening and before closing parentheses;

- leading spaces instead of tabs;

- printk() without KERN_* facility level;

- unnecessary braces for single-statement block;

- line over 80 characters.

In addition to these changes, also do the following:

- combine the nested 'if' statements into one when possible;

- remove needless parentheses;

- add missing and remove excess spaces between operator and its operands;

- fix printk() format specifiers mismatching the argument types;

- put the function's result type and name/parameters on the same line;

- insert missing and remove excess new lines;

- properly indent multi-line expressions;

- make the multi-line comment style consistent with the kernel style elsewhere
  by adding empty first line;

- fix typos, capitalize acronyms, etc. in the comments;

- update MontaVista copyright;

- remove Pete Popov's old email address...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-05-12 16:46:52 +01:00
Sergei Shtylyov
ce28f94ca5 [MIPS] Alchemy: kill useless #include's, #define's and extern's
Go thru the Alchemy code and hunt down every unneeded #include, #define, and
extern (some of which refer to already long dead functions).

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-28 17:14:28 +01:00
Harvey Harrison
bb09a954b6 [MIPS] replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-28 17:14:27 +01:00
Thomas Bogendoerfer
cf7b7e0b37 [MIPS] BCM1480: Fix PCI/HT IO access
- removed check for enable HT-PCI bridges, because some CFE version
  init only the needed one and scanning works even with disabled HT
  links
- implemented I/O access behind HT PCI busses
- fixed pci_map for IO resource behind PCI bridge

Tested with E100 and Tulip driver.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-01 15:46:33 +01:00
Thomas Bogendoerfer
e790a46429 [MIPS] BCM1480: Init pci controller io_map_base
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-03-12 14:14:42 +00:00
Ralf Baechle
234fcd1484 [MIPS] Fix loads of section missmatches
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-03-12 14:14:41 +00:00
Ralf Baechle
40d7c1aa61 [MIPS] PCI: Coding style fixes for pcibios_enable_resources.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-02-19 17:01:34 +00:00
Ralf Baechle
986c94854e [MIPS] PCI: Port i386 PCI fixes.
The MIPS version of pcibios_enalbe_resources did not have the fixes
from ed6d14f976 yet which under circumstances
similar to x86 might result in failures.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-02-19 17:01:32 +00:00
Ralf Baechle
07c019bccc [MIPS] BCM1480: Use constants instead of magic numbers in PCI code.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:59 +00:00
Thomas Bogendoerfer
f6c0f32ee8 [MIPS] Cobalt: Fix ethernet interrupts for RaQ1
RAQ1 uses the same interrupt routing as Qube2.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-15 01:04:42 +00:00
Thomas Bogendoerfer
c990081bf8 [MIPS] Fix IP32 breakage
- suppress master aborts during config read
- set io_map_base
- only fixup end of iomem resource to avoid failing request_resource
  in serial driver
- killed useless setting of crime_int bit, which caused wrong interrupts
- use physcial address for serial port platform device and let 8250
  driver do the ioremap

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-07 15:32:03 +00:00
Sergei Shtylyov
9cfacb790f [MIPS] Alchemy: Fix use of __init code bug exposed by modpost warning
WARNING: vmlinux.o(.text+0x1ca608): Section mismatch: reference to
.init.text: add_wired_entry (between 'config_access' and 'config_read')

by refactoring the code calling add_wired_entry() from config_access() to
a separate function which is called from aau1x_pci_setup(). While at it:

- make some unnecassarily global variables 'static';

- fix the letter case, whitespace, etc. in the comments...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-07 15:32:03 +00:00
Ralf Baechle
d20e47e153 [MIPS] PCI: Make pcibios_fixup_device_resources ignore legacy resources.
There might be other reasons why a resource might be marked as fixed
such as a PCI UART holding the system console but until we use
IORESOURCE_PCI_FIXED that way also this will work.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-12-14 17:34:29 +00:00
Ralf Baechle
f435a91e66 [MIPS] BCM1480: Fix interrupt routing, take 2.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-12-06 17:15:57 +00:00
Ralf Baechle
a6733f2e14 [MIPS] BCM1480: Fix interrupt routing.
The old code did did only work as long as CFE and the kernel were using
the same interrupt numbering ...

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-12-03 19:40:26 +00:00
Yoichi Yuasa
89becf5c0d [MIPS] Lasat: Fix overlap of interrupt number ranges.
The range of MIPS_CPU IRQ and the range of LASAT IRQ overlap.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15 23:21:50 +00:00
Thomas Bogendoerfer
fcee3faf83 [MIPS] SNI PCIT CPLUS: workaround for b0rked irq wiring of onboard PCI bus 1
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15 23:21:50 +00:00
Roel Kluin
bb856c5b49 [MIPS] iounmap if in vr41xx_pciu_init() pci clock is over 33MHz
iounmap if pci clock is over 33MHz.  Cosmetic because the iomap() in this
case is just a bit of address magic.

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Acked-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15 23:21:49 +00:00
Ralf Baechle
1a3b7920fe [MIPS] tb0219: Update copyright message.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-29 19:35:37 +00:00
Ralf Baechle
1553f6a2ca Author: Ralf Baechle <ralf@linux-mips.org>
[MIPS] MSP71xx: Fix bitrot.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-29 19:35:37 +00:00