- factor out fsck_err_get()
- if the "bcachefs (%s):" prefix has already been applied, don't
duplicate it
- convert to printbufs instead of static char arrays
- tidy up control flow a bit
- use bch2_print_string_as_lines(), to avoid messages getting truncated
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This removes an optimization that didn't actually save us any memory,
due to alignment, but did make the code more complicated than it needed
to be. We were also seeing a bug where journal_seq_base wasn't getting
correctly initailized, so hopefully it'll fix that too.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since we've now got time_stats for lock hold times (per btree
transaction), we don't need this anymore.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Also, do some reorganizing/renaming, convert atomic counters in bch_fs
to persistent counters, and add a few missing counters.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch
- tracks maximum bch2_trans_kmalloc() memory used in btree_transaction_stats
- makes it available in debugfs
- switches bch2_trans_init() to using that for the amount of memory to
preallocate, instead of the parameter passed in
This drastically reduces transaction restarts, and means we no longer
need to track this in the source code.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We need a way to check if the machinery for handling btree_paths with in
a transaction is behaving reasonably, as it often has not been - we've
had bugs with transaction path overflows caused by duplicate paths and
plenty of other things.
This patch tracks, per transaction fn, the most btree paths ever
allocated by that transaction and makes it available in debugfs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Going to be adding more things to this in the next patch.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We now record the length of time btree locks are held and expose this in debugfs.
Enabled via CONFIG_BCACHEFS_LOCK_TIME_STATS.
Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
fsck doesn't want to run while we're cleaning up deleted snapshots - if
that work needs to be done, we want it to have finished before fsck
runs, otherwise fsck will get confused when it finds multiple keys in
the same snapshot ID equivalence class (i.e. the mechanism that
snapshot deletion uses for cleaning up redundant keys).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
move_ratelimit() now has a bool that specifies whether we want to
wait for copygc to finish.
When copygc is running, we're probably low on free buckets instead
of consuming the remaining buckets, we want to wait for copygc to
finish.
This should help with performance, and run away bucket fragmentation.
Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
btree updates before going RW are expensive if they're in random order,
since they use the list of keys for journal replay to insert, which is
just a gap buffer.
This patch improves the bucket invalidate path so that if
bch2_check_lrus() hasn't finished it only prints warnings instead of
doing an emergency shutdown, which means we can now set BCH_FS_MAY_GO_RW
before bch2_check_lrus().
Also, the filesystem state bits are reorganized a bit.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This adds a new superblock field for persisting counters
and adds a sysfs interface in counters/ exposing these counters.
The superblock field is ignored by older versions letting us avoid
an on disk version bump.
Each sysfs file outputs a counter that tracks since filesystem
creation and a counter for the current mount session.
Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We're seeing occasional firings of the assertion in the key cache
shutdown code that nr_dirty == 0, which means we must sometimes be doing
transaction commits after we've gone read only.
Cleanups & changes:
- BCH_FS_ALLOC_CLEAN renamed to BCH_FS_CLEAN_SHUTDOWN
- new helper bch2_btree_interior_updates_flush(), which returns true if
it had to wait
- bch2_btree_flush_writes() now also returns true if there were btree
writes in flight
- __bch2_fs_read_only now checks if btree writes were in flight in the
shutdown loop: btree write completion does a transaction update, to
update the pointer in the parent node
- assert that !BCH_FS_CLEAN_SHUTDOWN in __bch2_trans_commit
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This option was useful when the replicas mechism was new and still being
debugged, but hasn't been used in ages - let's delete it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Previously, the journal read path used a linked list for storing the
journal entries we read from disk. But there's been a bug that's been
causing journal_flush_delay to incorrectly be set to 0, leading to far
more journal entries than is normal being written out, which then means
filesystems are no longer able to start due to the O(n^2) behaviour of
inserting into/searching that linked list.
Fix this by switching to a radix tree.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Btree updates before we go RW work by inserting into the array of keys
that journal replay will insert - but inserting into a flat array is
O(n), meaning if btree_gc needs to update many alloc keys, we're O(n^2).
Fortunately, the updates btree_gc does happens in sequential order,
which means a gap buffer works nicely here - this patch implements a gap
buffer for journal keys.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
All code using the in-memory bucket array, excluding GC, has now been
converted to use the alloc btree directly - so we can finally delete it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In the old allocator code, preparing an existing empty bucket was part
of the same code path that invalidated buckets containing cached data.
In the new allocator code this is no longer the case: the main allocator
path finds empty buckets (via the new freespace btree), and can't
allocate buckets that contain cached data.
We now need a separate code path to invalidate buckets containing cached
data when we're low on empty buckets, which this patch implements. When
the number of free buckets decreases that triggers the new invalidate
path to run, which uses the LRU btree to pick cached data buckets to
invalidate until we're above our watermark.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In the old allocator code, buckets would be discarded just prior to
being used - this made sense in bcache where we were discarding buckets
just after invalidating the cached data they contain, but in a
filesystem where we typically have more free space we want to be
discarding buckets when they become empty.
This patch implements the new behaviour - it checks the need_discard
btree for buckets awaiting discards, and then clears the appropriate
bit in the alloc btree, which moves the buckets to the freespace btree.
Additionally, discards are now enabled by default.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now that we have new persistent data structures for the allocator, this
patch converts the allocator to use them.
Now, foreground bucket allocation uses the freespace btree to find
buckets to allocate, instead of popping buckets off the freelist.
The background allocator threads are no longer needed and are deleted,
as well as the allocator freelists. Now we only need background tasks
for invalidating buckets containing cached data (when we are low on
empty buckets), and for issuing discards.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds two new btrees for the upcoming allocator rewrite: an extents
btree of free buckets, and a btree for buckets awaiting discards.
We also add a new trigger for alloc keys to keep the new btrees up to
date, and a compatibility path to initialize them on existing
filesystems.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This implements new persistent LRUs, to be used for buckets containing
cached data, as well as stripes ordered by time when a block became
empty.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
In sysfs, files can only output at most PAGE_SIZE. This is a problem for
debug info that needs to list an arbitrary number of times, and because
of this limit some of our debug info has been terser and harder to read
than we'd like.
This patch moves info about journal pins and cached btree nodes to
debugfs, and greatly expands and improves the output we return.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This improves __bch2_trans_commit - early in the recovery process, when
we're running btree_gc and before we want to go RW, it now uses
bch2_journal_key_insert() to add the update to the list of updates for
journal replay to do, instead of btree_gc having to use separate
interfaces depending on whether we're running at bringup or, later,
runtime.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
The old .debugcheck methods are no more and this just calls the .invalid
method, which doesn't add much since we already check that when doing
btree updates and when reading metadata in.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Like the previous patches, this converts bch2_gc_gens() to use the alloc
btree directly, and private arrays of generation numbers for its own
recalculation of oldest_gen.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This changes the btree_gc code to only use the second bucket array, the
one dedicated to GC. On completion, it compares what's in its in memory
bucket array to the allocation information in the btree and writes it
directly, instead of updating the main in-memory bucket array and
writing that.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Add a new helper that returns true if the given btree ID uses the btree
key cache. This enables some new cleanups, since the helper can check
the options for whether caching is enabled on a given btree.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
We were double-freeing old_buckets and not freeing old_buckets_gens:
also, the code was supposed to free buckets, not old_buckets;
old_buckets is only needed because we have to use rcu_assign_pointer()
instead of swap(), and won't be set if we hit the error path.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Implement a hash table, using cuckoo hashing, for empty buckets that are
waiting on a journal commit before they can be reused.
This replaces the journal_seq field of bucket_mark, and is part of
eventually getting rid of the in memory bucket array.
We may need to make bch2_bucket_needs_journal_commit() lockless, pending
profiling and testing.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This reverts commit f95b61228efd04c9c158123da5827c96e9773b29.
It turns out, we're seeing filesystems in the wild end up with
blacklisted btree node bsets - this should not be happening, and until
we understand why and fix it we need to keep this code around.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
- Add a shim uuid_unparse_lower() in the kernel, since %pU doesn't work
in userspace
- We don't need to print the bcachefs: or the filesystem name prefix in
userspace
- Improve a few error messages
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Add a field to bch_dev for the dev_t of the underlying block device -
this fixes a null ptr deref in tracepoints.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
With BTREE_ITER_WITH_JOURNAL, there's no longer any restrictions on the
order we have to replay keys from the journal in, and we can also start
up journal reclaim right away - and delete a bunch of code.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This adds a new btree iterator flag, BTREE_ITER_WITH_JOURNAL, that is
automatically enabled when initializing a btree iterator before journal
replay has completed - it overlays the contents of the journal with the
btree.
This lets us delete bch2_btree_and_journal_walk() and just use the
normal btree iterator interface instead - which also lets us delete a
significant amount of duplicated code.
Note that BTREE_ITER_WITH_JOURNAL is still unoptimized in this patch -
we're redoing the binary search over keys in the journal every time we
call bch2_btree_iter_peek().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a flag to indicate whether a journal replay key has been
overwritten, and set/test it with appropriate btree locks held.
This fixes a race between the allocator - invalidating buckets, and
doing btree updates - and journal replay, which before this patch could
clobber the allocator thread's update with an older version of the key
from the journal.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
The main in-memory bucket array is going away, but we'll still need to
keep bucket generations in memory, at least for now - ptr_stale() needs
to be an efficient operation.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This is so that the copygc code doesn't have to refer to
bucket_mark.owned_by_allocator - assisting in getting rid of the in
memory bucket array.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Since metadata version bcachefs_metadata_version_btree_ptr_sectors_written,
we haven't needed the journal seq blacklist mechanism for ignoring
blacklisted btree node writes - we now only need it for ignoring journal
entries that were written after the newest flush journal entry, and then
we only need to keep those blacklist entries around until journal replay
is finished.
That means we can delete the code for scanning btree nodes to GC
journal_seq_blacklist entries.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
If the allocator threads start before journal replay has finished
replaying alloc keys, journal replay might overwrite the allocator's
btree updates.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This changes bch2_bucket_alloc_new_fs() to a simple bump allocator that
doesn't need to use the in memory bucket array, part of a larger patch
series to entirely get rid of the in memory bucket array, except for
gc/fsck.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
It'll now be handled at format time and in sysfs like other options - it
still can only be set at format time, though.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This adds flags for options that must be a power of two (block size and
btree node size), and options that are stored in the superblock as a
power of two (encoded extent max).
Also: options are now stored in memory in the same units they're
displayed in (bytes): we now convert when getting and setting from the
superblock.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This fixes some bugs when we hit an error very early in the filesystem
startup path, before most things have been initialized.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This adds more latency/event measurements and breaks some apart into
more events. Journal writes are broken apart into flush writes and
noflush writes, btree compactions are broken out from btree splits,
btree mergers are added, as well as btree_interior_updates - foreground
and total.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
We have two radix trees of stripes - one that mirrors some information
from the stripes btree in normal operation, and another that GC uses to
recalculate block usage counts.
The normal one is now only used for finding partially empty stripes in
order to reuse them - the normal stripes radix tree and the GC stripes
radix tree are used significantly differently, so this patch splits them
into separate types.
In an upcoming patch we'll be replacing c->stripes with a btree that
indexes stripes by the order we want to reuse them.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
