This is useful for distinguishing SMB sessions on a multiuser mount.
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
This code is more organized and robust.
Signed-off-by: Kenneth D'souza <kdsouza@redhat.com>
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently the end user is unaware with what sec type the
cifs share is mounted if no sec=<type> option is parsed.
With this patch one can easily check from DebugData.
Example:
1) Name: x.x.x.x Uses: 1 Capability: 0x8001f3fc Session Status: 1 Security type: RawNTLMSSP
Signed-off-by: Kenneth D'souza <kdsouza@redhat.com>
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Aurelien Aptel <aaptel@suse.com>
As an optimization, SMBD tries to track two types of packets: packets with
payload and without payload. There is no obvious benefit or performance gain
to separately track two types of packets.
Just treat them as pending packets and merge the tracking code.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
* show server&TCP states for extra channels
* mention if an interface has a channel connected to it
In this version three of the patch, fixed minor printk format
issue pointed out by the kbuild robot.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Number of requests in_send and the number of waiters on sendRecv
are useful counters in various cases, move them from
CONFIG_CIFS_STATS2 to be on by default especially with multichannel
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
On reconnect, the transport data structure is NULL and its information is not
available.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Displayed in /proc/fs/cifs/Stats once for each
socket we are connected to.
This allows us to find out what the maximum number of
requests that had been in flight (at any one time). Note that
/proc/fs/cifs/Stats can be reset if you want to look for
maximum over a small period of time.
Sample output (immediately after mount):
Resources in use
CIFS Session: 1
Share (unique mount targets): 2
SMB Request/Response Buffer: 1 Pool size: 5
SMB Small Req/Resp Buffer: 1 Pool size: 30
Operations (MIDs): 0
0 session 0 share reconnects
Total vfs operations: 5 maximum at one time: 2
Max requests in flight: 2
1) \\localhost\scratch
SMBs: 18
Bytes read: 0 Bytes written: 0
...
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
SMB3 ACL support is needed for many use cases now and should not be
ifdeffed out, even for SMB1 (CIFS). Remove the CONFIG_CIFS_ACL
ifdef so ACL support is always built into cifs.ko
Signed-off-by: Steve French <stfrench@microsoft.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Displaying the session id in /proc/fs/cifs/DebugData
is needed in order to correlate Linux client information
with network and server traces for many common support
scenarios. Turned out to be very important for debugging.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
New negotiate context (3) allows the server and client to
negotiate which compression algorithms to use. Add support
for this and save it off in the server structure.
Also now displayed in /proc/fs/cifs/DebugData (see below example
to Windows 10) where compression algoirthm "LZ77" was negotiated:
Servers:
Number of credits: 326 Dialect 0x311 COMPRESS_LZ77 signed
1) Name: 192.168.92.17 Uses: 1 Capability: 0x300067 Session Status: 1 TCP status: 1 Instance: 1
See MS-XCA and MS-SMB2 2.2.3.1 for more details.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Now upper layer is handling the transport shutdown and reconnect, remove
the code that handling transport shutdown on RDMA disconnect.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
It can be helpful for debugging. According to MS-FSCC:
"A 32-bit unsigned integer that contains the serial number of the
volume. The serial number is an opaque value generated by the file
system at format time"
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
When the server required encryption (but we didn't connect to it with the
"seal" mount option) we weren't displaying in /proc/fs/cifs/DebugData that
the tcon for that share was encrypted. Similarly we were not displaying
that signing was required when ses->sign was enabled (we only
checked ses->server->sign). This makes it easier to debug when in
fact the connection is signed (or sealed), whether for performance
or security questions.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Was helpful in debug for some recent problems.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
* Add new dfs_cache.[ch] files
* Add new /proc/fs/cifs/dfscache file
- dump current cache when read
- clear current cache when writing "0" to it
* Add delayed_work to periodically refresh cache entries
The new interface will be used for caching DFS referrals, as well as
supporting client target failover.
The DFS cache is a hashtable that maps UNC paths to cache entries.
A cache entry contains:
- the UNC path it is mapped on
- how much the the UNC path the entry consumes
- flags
- a Time-To-Live after which the entry expires
- a list of possible targets (linked lists of UNC paths)
- a "hint target" pointing the last known working target or the first
target if none were tried. This hint lets cifs.ko remember and try
working targets first.
* Looking for an entry in the cache is done with dfs_cache_find()
- if no valid entries are found, a DFS query is made, stored in the
cache and returned
- the full target list can be copied and returned to avoid race
conditions and looped on with the help with the
dfs_cache_tgt_iterator
* Updating the target hint to the next target is done with
dfs_cache_update_tgthint()
These functions have a dfs_cache_noreq_XXX() version that doesn't
fetches referrals if no entries are found. These versions don't
require the tcp/ses/tcon/cifs_sb parameters as a result.
Expired entries cannot be used and since they have a pretty short TTL
[1] in order for them to be useful for failover the DFS cache adds a
delayed work called periodically to keep them fresh.
Since we might not have available connections to issue the referral
request when refreshing we need to store volume_info structs with
credentials and other needed info to be able to connect to the right
server.
1: Windows defaults: 5mn for domain-based referrals, 30mn for regular
links
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In order to debug complex problems it is often helpful to
have detailed information on the client and server view
of the open file information. Add the ability for root to
view the list of smb3 open files and dump the persistent
handle and other info so that it can be more easily
correlated with server logs.
Sample output from "cat /proc/fs/cifs/open_files"
# Version:1
# Format:
# <tree id> <persistent fid> <flags> <count> <pid> <uid> <filename> <mid>
0x5 0x800000378 0x8000 1 7704 0 some-file 0x14
0xcb903c0c 0x84412e67 0x8000 1 7754 1001 rofile 0x1a6d
0xcb903c0c 0x9526b767 0x8000 1 7720 1000 file 0x1a5b
0xcb903c0c 0x9ce41a21 0x8000 1 7715 0 smallfile 0xd67
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Make the output of /proc/fs/cifs/DebugData a little easier to
read by cleaning up the listing of network interfaces removing
a wasted line break.
Here is a comparison of the network interface information
that from be viewed at the end of output from
"cat /proc/fs/cifs/DebugData"
Before:
Server interfaces: 8
0)
Speed: 10000000000 bps
Capabilities: rss
IPv6: fe80:0000:0000:0000:2cf5:407e:84b0:21dd
1)
Speed: 1000000000 bps
Capabilities:
IPv6: fe80:0000:0000:0000:61cd:6147:3d0c:f484
vs. after:
Server interfaces: 11
0) Speed: 10000000000 bps
Capabilities: rss
IPv6: fe80:0000:0000:0000:2cf5:407e:84b0:21dd
1) Speed: 2000000000 bps
Capabilities:
IPv6: fe80:0000:0000:0000:3d76:2d05:dcf8:ed10
Signed-off-by: Steve French <stfrench@microsoft.com>
Each time we reconnect to the same server, bump an instance
counter (and display in /proc/fs/cifs/DebugData) to make it
easier to debug.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Currently, "echo 0 > /proc/fs/cifs/Stats" resets all of the stats
except the session and share reconnect counts. Fix it to
reset those as well.
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
When CONFIG_CIFS_STATS2 is enabled keep counters for slow
commands (ie server took longer than 1 second to respond)
by SMB2/SMB3 command code. This can help in diagnosing
whether performance problems are on server (instead of
client) and which commands are causing the problem.
Sample output (the new lines contain words "slow responses ...")
$ cat /proc/fs/cifs/Stats
Resources in use
CIFS Session: 1
Share (unique mount targets): 2
SMB Request/Response Buffer: 1 Pool size: 5
SMB Small Req/Resp Buffer: 1 Pool size: 30
Total Large 10 Small 490 Allocations
Operations (MIDs): 0
0 session 0 share reconnects
Total vfs operations: 67 maximum at one time: 2
4 slow responses from localhost for command 5
1 slow responses from localhost for command 6
1 slow responses from localhost for command 14
1 slow responses from localhost for command 16
1) \\localhost\test
SMBs: 243
Bytes read: 1024000 Bytes written: 104857600
TreeConnects: 1 total 0 failed
TreeDisconnects: 0 total 0 failed
Creates: 40 total 0 failed
Closes: 39 total 0 failed
...
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CONFIG_CIFS_STATS is now always enabled (to simplify the
code and since the STATS are important for some common
customer use cases and also debugging), but needed one
minor change so that STATS shows as enabled in the debug
output in /proc/fs/cifs/DebugData, otherwise it could
get confusing with STATS no longer showing up in the
"Features" list in /proc/fs/cifs/DebugData when basic
stats were in fact available.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
echo 0 > /proc/fs/cifs/Stats is supposed to reset the stats
but there were four (see example below) that were not reset
(bytes read and witten, total vfs ops and max ops
at one time).
...
0 session 0 share reconnects
Total vfs operations: 100 maximum at one time: 2
1) \\localhost\test
SMBs: 0
Bytes read: 502092 Bytes written: 31457286
TreeConnects: 0 total 0 failed
TreeDisconnects: 0 total 0 failed
...
This patch fixes cifs_stats_proc_write to properly reset
those four.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CONFIG_CIFS_STATS should always be enabled as Pavel recently
noted. Simple statistics are not a significant performance hit,
and removing the ifdef simplifies the code slightly.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
We really, really want to be encouraging use of secure dialects,
and SMB3.1.1 offers useful security features, and will soon
be the recommended dialect for many use cases. Simplify the code
by removing the CONFIG_CIFS_SMB311 ifdef so users don't disable
it in the build, and create compatibility and/or security issues
with modern servers - many of which have been supporting this
dialect for multiple years.
Also clarify some of the Kconfig text for cifs.ko about
SMB3.1.1 and current supported features in the module.
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
/proc/fs/cifs/DebugData displays the features (Kconfig options)
used to build cifs.ko but it was missing some, and needed comma
separator. These can be useful in debugging certain problems
so we know which optional features were enabled in the user's build.
Also clarify them, by making them more closely match the
corresponding CONFIG_CIFS_* parm.
Old format:
Features: dfs fscache posix spnego xattr acl
New format:
Features: DFS,FSCACHE,SMB_DIRECT,STATS,DEBUG2,ALLOW_INSECURE_LEGACY,CIFS_POSIX,UPCALL(SPNEGO),XATTR,ACL
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
CC: Stable <stable@vger.kernel.org>
If server does not support listing interfaces then do not
display empty "Server interfaces" line to avoid confusing users.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Aurelien Aptel <aaptel@suse.com>
-----BEGIN PGP SIGNATURE-----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=EXH7
-----END PGP SIGNATURE-----
Merge tag '4.18-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
- smb3 fixes for stable
- addition of ftrace hooks for cifs.ko
- improvements in compounding and smbdirect (rdma)
* tag '4.18-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (38 commits)
CIFS: Add support for direct pages in wdata
CIFS: Use offset when reading pages
CIFS: Add support for direct pages in rdata
cifs: update multiplex loop to handle compounded responses
cifs: remove header_preamble_size where it is always 0
cifs: remove struct smb2_hdr
CIFS: 511c54a2f6 adds a check for session expiry, status STATUS_NETWORK_SESSION_EXPIRED, however the server can also respond with STATUS_USER_SESSION_DELETED in cases where the session has been idle for some time and the server reaps the session to recover resources.
cifs: change smb2_get_data_area_len to take a smb2_sync_hdr as argument
cifs: update smb2_calc_size to use smb2_sync_hdr instead of smb2_hdr
cifs: remove struct smb2_oplock_break_rsp
cifs: remove rfc1002 header from all SMB2 response structures
smb3: on reconnect set PreviousSessionId field
smb3: Add posix create context for smb3.11 posix mounts
smb3: add tracepoints for smb2/smb3 open
cifs: add debug output to show nocase mount option
smb3: add define for id for posix create context and corresponding struct
cifs: update smb2_check_message to handle PDUs without a 4 byte length header
smb3: allow "posix" mount option to enable new SMB311 protocol extensions
smb3: add support for posix negotiate context
cifs: allow disabling less secure legacy dialects
...
Unlike CIFS where UNIX/POSIX extensions had been negotiatable,
SMB3 did not have POSIX extensions yet. Add the new SMB3.11
POSIX negotiate context to ask the server whether it can
support POSIX (and thus whether we can send the new POSIX open
context).
Signed-off-by: Steve French <smfrench@gmail.com>
RHBZ: 1539612
Lets show the "w" bit for those files have a .write interface to set/enable/...
the feature.
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ: 1539617
Check that, if it is not a boolean, the value the user tries
to write to /proc/fs/cifs/cifsFYI is valid and return an error
if not.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Previous patches "cifs: update calc_size to take a server argument"
and
"cifs: add server argument to the dump_detail method"
were broken if CONFIG_CIFS_DEBUG2 enabled
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Ronnie Sahlberg <lsahlber@redhat.com>
We need a struct TCP_Server_Info *server to this method as it calls
calc_size. The calc_size method will soon be changed to also
take a server argument.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Variants of proc_create{,_data} that directly take a seq_file show
callback and drastically reduces the boilerplate code in the callers.
All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
* Since cifs_vfs_error was just using pr_debug_ratelimited like the rest
of cifs_dbg, move it there too
* Add a ONCE type flag to call the pr_xxx_once() debug function instead
of the ratelimited ones.
To convert existing printk_once() calls to this we can run:
perl -i -pE \
's/printk_once\s*\(([^" \n]+)(.*)/cifs_dbg(VFS|ONCE,$2/g' \
fs/cifs/*.c
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Allow dumping out debug information on dialect, signing, unix extensions
and encryption
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Quiet minor sparse warnings in new SMB3 rdma patch series
("symbol was not declared ...") by moving these externs to smbdirect.h
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
dump it as first share with an "IPC: " prefix.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
For debugging and troubleshooting, export SMBDirect debug counters to
/proc/fs/cifs/DebugData.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
For use-configurable SMB Direct protocol values, export them to /proc/fs/cifs.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Add "rdma" to CIFS mount options to connect to SMB Direct.
Add checks to validate this is used on SMB 3.X dialects.
To connect to SMBDirect, use "mount.cifs -o rdma,vers=3.x".
At the time of this patch, 3.x can be 3.0, 3.02 or 3.1.1.
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Ronnie Sahlberg <lsahlber.redhat.com>
We were not displaying some key fields (session status and capabilities and
whether guest authenticated) for SMB2/SMB3 session in /proc/fs/cifs/DebugData.
This is needed for real world triage of problems with the (now much more
common) SMB3 mounts.
Signed-off-by: Steve French <smfrench@gmail.com>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In debugging smb3, it is useful to display the number
of credits available, so we can see when the server has not granted
sufficient operations for the client to make progress, or alternatively
the client has requested too many credits (as we saw in a recent bug)
so we can compare with the number of credits the server thinks
we have.
Add a /proc/fs/cifs/DebugData line to display the client view
on how many credits are available.
Signed-off-by: Steve French <steve.french@primarydata.com>
Reported-by: Germano Percossi <germano.percossi@citrix.com>
CC: Stable <stable@vger.kernel.org>
it's not needed for file_operations of inodes located on fs defined
in the hosting module and for file_operations that go into procfs.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
