mirror of
https://github.com/torvalds/linux.git
synced 2024-11-14 16:12:02 +00:00
2be1d4f119
27239 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
9187210eee |
Networking changes for 6.9.
Core & protocols
----------------
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps etc.)
lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core
instead of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length
and budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global config
variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug
of ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for
use on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code
--------------------------------------------
- Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce
VM_SPARSE kind and vm_area_[un]map_pages (used by bpf_arena).
- Rework selftest harness to enable the use of the full range of
ksft exit code (pass, fail, skip, xfail, xpass).
Netfilter
---------
- Allow userspace to define a table that is exclusively owned by a daemon
(via netlink socket aliveness) without auto-removing this table when
the userspace program exits. Such table gets marked as orphaned and
a restarting management daemon can re-attach/regain ownership.
- Speed up element insertions to nftables' concatenated-ranges set type.
Compact a few related data structures.
BPF
---
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between BPF
program and user space where structures inside the arena can have
pointers to other areas of the arena, and pointers work seamlessly
for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the verifier
and the program. The verifier allows the program to loop assuming it's
behaving well, but reserves the right to terminate it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF objects.
Wireless
--------
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API
----------
- Major overhaul of the Energy Efficient Ethernet internals to support
new link modes (2.5GE, 5GE), share more code between drivers
(especially those using phylib), and encourage more uniform behavior.
Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc
----
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions,
and packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message encapsulation
or "Netlink polymorphism", where interpretation of nested attributes
depends on link type, classifier type or some other "class type".
Drivers
-------
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic
on CAN BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO) support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oY52
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
|
||
|
Linus Torvalds
|
216532e147 |
hardening updates for v6.9-rc1
- string.h and related header cleanups (Tanzir Hasan, Andy Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev, Harshit
Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure (Michael
Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer
-----BEGIN PGP SIGNATURE-----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=OP+o
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As is pretty normal for this tree, there are changes all over the
place, especially for small fixes, selftest improvements, and improved
macro usability.
Some header changes ended up landing via this tree as they depended on
the string header cleanups. Also, a notable set of changes is the work
for the reintroduction of the UBSAN signed integer overflow sanitizer
so that we can continue to make improvements on the compiler side to
make this sanitizer a more viable future security hardening option.
Summary:
- string.h and related header cleanups (Tanzir Hasan, Andy
Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev,
Harshit Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure
(Michael Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob
Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer"
* tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits)
selftests/powerpc: Fix load_unaligned_zeropad build failure
string: Convert helpers selftest to KUnit
string: Convert selftest to KUnit
sh: Fix build with CONFIG_UBSAN=y
compiler.h: Explain how __is_constexpr() works
overflow: Allow non-type arg to type_max() and type_min()
VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
lib/string_helpers: Add flags param to string_get_size()
x86, relocs: Ignore relocations in .notes section
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
overflow: Use POD in check_shl_overflow()
lib: stackinit: Adjust target string to 8 bytes for m68k
sparc: vdso: Disable UBSAN instrumentation
kernel.h: Move lib/cmdline.c prototypes to string.h
leaking_addresses: Provide mechanism to scan binary files
leaking_addresses: Ignore input device status lines
leaking_addresses: Use File::Temp for /tmp files
MAINTAINERS: Update LEAKING_ADDRESSES details
fortify: Improve buffer overflow reporting
fortify: Add KUnit tests for runtime overflows
...
|
||
|
Linus Torvalds
|
65d287c7eb |
asm-generic updates for 6.9
Just two small updates this time:
- A series I did to unify the definition of PAGE_SIZE through Kconfig,
intended to help with a vdso rework that needs the constant but
cannot include the normal kernel headers when building the compat
VDSO on arm64 and potentially others.
- a patch from Yan Zhao to remove the pfn_to_virt() definitions from
a couple of architectures after finding they were both incorrect
and entirely unused.
-----BEGIN PGP SIGNATURE-----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=X4Cs
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"Just two small updates this time:
- A series I did to unify the definition of PAGE_SIZE through
Kconfig, intended to help with a vdso rework that needs the
constant but cannot include the normal kernel headers when building
the compat VDSO on arm64 and potentially others
- a patch from Yan Zhao to remove the pfn_to_virt() definitions from
a couple of architectures after finding they were both incorrect
and entirely unused"
* tag 'asm-generic-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: define CONFIG_PAGE_SIZE_*KB on all architectures
arch: simplify architecture specific page size configuration
arch: consolidate existing CONFIG_PAGE_SIZE_*KB definitions
mm: Remove broken pfn_to_virt() on arch csky/hexagon/openrisc
|
||
|
Linus Torvalds
|
89c572e2f3 |
Scheduler changes for v6.9:
- Fix inconsistency in misfit task load-balancing - Fix CPU isolation bugs in the task-wakeup logic - Rework & unify the sched_use_asym_prio() and sched_asym_prefer() logic - Clean up & simplify ->avg_* accesses - Misc cleanups & fixes Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmXu9V0RHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1gqWBAAvqPlJx/jwNTePiXtxsObmtTnTStnVSM8 8SRxb2uznSFjYj73RdMDUzeYOfweE48elJoUAN7IGX2fgCFjxeDgpPnAyvnU0jFE X/gJXEO2xCCYsvDnMg1huNSxEJ1ZQl6YJgdd6eLGjBK6l75pkgLJLOSmeFfTShgw gMk4yIaUrxd/yc/bBvK39gMW1JDXiFIwmHuzfEl0/5k+abzVOU0ZfqFir2OH/GT9 YH8ZNsKKn88i01mp2qzo9LouF7mmOH4dZYd9k0SueH+rW8Z+goSuVF8O3igodL0T TM5sqqG7qd1WC8SN0zng+OGODmJ+PrN7soKbTZC5NsC+LvipjVZ1Y92dLyS1xhgn Bpm+NjVNrz9ZWhZiC5LiIF+zDZHu51RDejcOgt1Va6qBIY229GFKLgxFSis/TzzD 7xFpi7ApGCS/Rp9VeIDC69V8ZVfsCPJ7D1oxo5wmLzGe17nThxMeE1AmoWOXOUp8 M9ISbvete8i/8uS8jJQQMylrFceQkzumTVK7p+LqEdlaH0fF/fNKyeH81ZLZMwpM 0pfc7OVFpxd3Rt4wq+db00ilStdfV4yKkVAJiOLfVPyh+tZusvxkKjqXIMrm3RI/ DkZu6/3KYompfVcfkVXbW57Zu+kfgi6kQVt+6yEGrnLcIPkaPR08inEB7vtf6T+R EBncKVtt1Rs= =3CZV -----END PGP SIGNATURE----- Merge tag 'sched-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - Fix inconsistency in misfit task load-balancing - Fix CPU isolation bugs in the task-wakeup logic - Rework and unify the sched_use_asym_prio() and sched_asym_prefer() logic - Clean up and simplify ->avg_* accesses - Misc cleanups and fixes * tag 'sched-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/topology: Rename SD_SHARE_PKG_RESOURCES to SD_SHARE_LLC sched/fair: Check the SD_ASYM_PACKING flag in sched_use_asym_prio() sched/fair: Rework sched_use_asym_prio() and sched_asym_prefer() sched/fair: Remove unused parameter from sched_asym() sched/topology: Remove duplicate descriptions from TOPOLOGY_SD_FLAGS sched/fair: Simplify the update_sd_pick_busiest() logic sched/fair: Do strict inequality check for busiest misfit task group sched/fair: Remove unnecessary goto in update_sd_lb_stats() sched/fair: Take the scheduling domain into account in select_idle_core() sched/fair: Take the scheduling domain into account in select_idle_smt() sched/fair: Add READ_ONCE() and use existing helper function to access ->avg_irq sched/fair: Use existing helper functions to access ->avg_rt and ->avg_dl sched/core: Simplify code by removing duplicate #ifdefs |
||
Jakub Kicinski
|
5f20e6ab1f |
for-netdev
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmXvm7IACgkQ6rmadz2v bTqdMA//VMHNHVLb4oROoXyQD9fw2mCmIUEKzP88RXfqcxsfEX7HF+k8B5ZTk0ro CHXTAnc79+Qqg0j24bkQKxup/fKBQVw9D+Ia4b3ytlm1I2MtyU/16xNEzVhAPU2D iKk6mVBsEdCbt/GjpWORy/VVnZlZpC7BOpZLxsbbxgXOndnCegyjXzSnLGJGxdvi zkrQTn2SrFzLi6aNpVLqrv6Nks6HJusfCKsIrtlbkQ85dulasHOtwK9s6GF60nte aaho+MPx3L+lWEgapsm8rR779pHaYIB/GbZUgEPxE/xUJ/V8BzDgFNLMzEiIBRMN a0zZam11BkBzCfcO9gkvDRByaei/dZz2jdqfU4GlHklFj1WFfz8Q7fRLEPINksvj WXLgJADGY5mtGbjG21FScThxzj+Ruqwx0a13ddlyI/W+P3y5yzSWsLwJG5F9p0oU 6nlkJ4U8yg+9E1ie5ae0TibqvRJzXPjfOERZGwYDSVvfQGzv1z+DGSOPMmgNcWYM dIaO+A/+NS3zdbk8+1PP2SBbhHPk6kWyCUByWc7wMzCPTiwriFGY/DD2sN+Fsufo zorzfikUQOlTfzzD5jbmT49U8hUQUf6QIWsu7BijSiHaaC7am4S8QB2O6ibJMqdv yNiwvuX+ThgVIY3QKrLLqL0KPGeKMR5mtfq6rrwSpfp/b4g27FE= =eFgA -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Alexei Starovoitov says: ==================== pull-request: bpf-next 2024-03-11 We've added 59 non-merge commits during the last 9 day(s) which contain a total of 88 files changed, 4181 insertions(+), 590 deletions(-). The main changes are: 1) Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce VM_SPARSE kind and vm_area_[un]map_pages to be used in bpf_arena, from Alexei. 2) Introduce bpf_arena which is sparse shared memory region between bpf program and user space where structures inside the arena can have pointers to other areas of the arena, and pointers work seamlessly for both user-space programs and bpf programs, from Alexei and Andrii. 3) Introduce may_goto instruction that is a contract between the verifier and the program. The verifier allows the program to loop assuming it's behaving well, but reserves the right to terminate it, from Alexei. 4) Use IETF format for field definitions in the BPF standard document, from Dave. 5) Extend struct_ops libbpf APIs to allow specify version suffixes for stuct_ops map types, share the same BPF program between several map definitions, and other improvements, from Eduard. 6) Enable struct_ops support for more than one page in trampolines, from Kui-Feng. 7) Support kCFI + BPF on riscv64, from Puranjay. 8) Use bpf_prog_pack for arm64 bpf trampoline, from Puranjay. 9) Fix roundup_pow_of_two undefined behavior on 32-bit archs, from Toke. ==================== Link: https://lore.kernel.org/r/20240312003646.8692-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Alexei Starovoitov
|
d7bca9199a |
mm: Introduce vmap_page_range() to map pages in PCI address space
ioremap_page_range() should be used for ranges within vmalloc range only.
The vmalloc ranges are allocated by get_vm_area(). PCI has "resource"
allocator that manages PCI_IOBASE, IO_SPACE_LIMIT address range, hence
introduce vmap_page_range() to be used exclusively to map pages
in PCI address space.
Fixes:
|
||
Paolo Bonzini
|
961e2bfcf3 |
KVM/arm64 updates for 6.9
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized to
address serialization some of the serialization on the LPI injection
path
- Support for _architectural_ VHE-only systems, advertised through the
absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZepBjgAKCRCivnWIJHzd
FnngAP93VxjCkJ+5qSmYpFNG6r0ECVIbLHFQ59nKn0+GgvbPEgEAwt8svdLdW06h
njFTpdzvl4Po+aD/V9xHgqVz3kVvZwE=
=1FbW
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.9
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized to
address serialization some of the serialization on the LPI injection
path
- Support for _architectural_ VHE-only systems, advertised through the
absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
|
||
|
Paolo Bonzini
|
233d0bc4d8 |
LoongArch KVM changes for v6.9
1. Set reserved bits as zero in CPUCFG. 2. Start SW timer only when vcpu is blocking. 3. Do not restart SW timer when it is expired. 4. Remove unnecessary CSR register saving during enter guest. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmXoeWIWHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImehb3D/9C5IrdyU/2f3fEUuuXO0a2ZS1p l2OT+yr7C6/jATokGcd+53CF8MzYawzuAT3tSXYyoqAxRu0HUkvuS1oA/eFM4EwV iIoUC3jnqcsQ5LCPt6yt+Tzgug64Xm5F4btYWIpmXgCJWx/VVG6+z3JarXAfA2it vgVMGgrrfHt68sEsenNFNgiJ5tCCubjR7XFwjM8rsL7AzUDdmXpF7gFyH2Ufgosi a5CxcPPauO1y5ZCGU4JU9QvxnVqW1kt/TRZIGqqGfULtlBSoZbD9zP3OcCQkL+ai SPNxvU5I+BeX6honpmO6aR/F1EphQhRji3ZKxI8UBo4aJD5+FtMG/YOEPI+ZAS0/ JPuWpDqJH46SN3jfKTQay8jXc+mcnOYXJ9Yrixd4UCf66WJit/+BOma/wP638u2j RUzm1kqhNGad6QiDDtSjISM6sg6FozAGc/KhCkWAhV+lHLnfkXtaf3S+GIu5OiWz ETCKlmIGiy0y774+iftlD7RDRGmtrC4cx5ibl7cKKi62Y5vgujCdDofAyYC+D5cW puaIuHOx1hWtPRT9p1WfUL310ED+Qj3N2pDDcJcqdCIiRRZ5l/hxGS7V687a30WV GcegEqh19CjI9KDat4E1ld4jUHJxaFrw3pr2z3SP7cW3IgdngPJL57M0M2jSazaQ 479xZPJ/i4xhJaKACg== =8HOW -----END PGP SIGNATURE----- Merge tag 'loongarch-kvm-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD LoongArch KVM changes for v6.9 * Set reserved bits as zero in CPUCFG. * Start SW timer only when vcpu is blocking. * Do not restart SW timer when it is expired. * Remove unnecessary CSR register saving during enter guest. |
||
|
Paolo Bonzini
|
7d8942d8e7 |
KVM GUEST_MEMFD fixes for 6.8:
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY to
avoid creating ABI that KVM can't sanely support.
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely a development and testing vehicle, and
come with zero guarantees.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term plan
is to support confidential VMs with deterministic private memory (SNP
and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD negative test that resulted in false passes
when verifying that KVM_MEM_GUEST_MEMFD memslots can't be dirty logged.
-----BEGIN PGP SIGNATURE-----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=M0td
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-guest_memfd_fixes-6.8' of https://github.com/kvm-x86/linux into HEAD
KVM GUEST_MEMFD fixes for 6.8:
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY to
avoid creating ABI that KVM can't sanely support.
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely a development and testing vehicle, and
come with zero guarantees.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term plan
is to support confidential VMs with deterministic private memory (SNP
and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD negative test that resulted in false passes
when verifying that KVM_MEM_GUEST_MEMFD memslots can't be dirty logged.
|
||
Thomas Zimmermann
|
838f865802 |
arch/powerpc: Remove <linux/fb.h> from backlight code
Replace <linux/fb.h> with a forward declaration in <asm/backlight.h> to
resolve an unnecessary dependency. Remove pmac_backlight_curve_lookup()
and struct fb_info from source and header files. The function and the
framebuffer struct are unused. No functional changes.
v3:
* Add Fixes tag (Christophe)
* fix typos in commit message (Jani)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes:
|
||
Dawei Li
|
9db2235326 |
powerpc/macio: Make remove callback of macio driver void returned
Commit
|
||
Michael Ellerman
|
c2e5d70cf0 |
powerpc/83xx: Fix build failure with FPU=n
Building eg. 83xx/mpc832x_rdb_defconfig with FPU=n, fails with:
arch/powerpc/platforms/83xx/suspend.c: In function 'mpc83xx_suspend_enter':
arch/powerpc/platforms/83xx/suspend.c:209:17: error: implicit declaration of function 'enable_kernel_fp'
209 | enable_kernel_fp();
Fix it by providing an enable_kernel_fp() stub for FPU=n builds,
which allows using IS_ENABLED(CONFIG_PPC_FPU) around the call to
enable_kernel_fp().
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240306125853.3714578-2-mpe@ellerman.id.au
|
||
|
Michael Ellerman
|
329105ce53 |
powerpc/64s: Fix get_hugepd_cache_index() build failure
With CONFIG_BUG=n, the 64-bit Book3S build fails with: arch/powerpc/include/asm/book3s/64/pgtable-64k.h: In function 'get_hugepd_cache_index': arch/powerpc/include/asm/book3s/64/pgtable-64k.h:51:1: error: no return statement in function returning non-void Currently the body of the function is just BUG(), so when CONFIG_BUG=n it is an empty function, leading to the error. get_hugepd_cache_index() should never be called, the only call is behind an is_hugepd() check, which is always false for this configuration. Instead mark it as always inline, and change the BUG() to BUILD_BUG(). That should allow the compiler to see that the function is never called, and therefore that it never returns, fixing the build error. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240306125853.3714578-1-mpe@ellerman.id.au |
||
Peter Xu
|
e72c7c2b88 |
mm/treewide: drop pXd_large()
They're not used anymore, drop all of them. Link: https://lkml.kernel.org/r/20240305043750.93762-10-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Muchun Song <muchun.song@linux.dev> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Peter Xu
|
0a845e0f63 |
mm/treewide: replace pud_large() with pud_leaf()
pud_large() is always defined as pud_leaf(). Merge their usages. Chose pud_leaf() because pud_leaf() is a global API, while pud_large() is not. Link: https://lkml.kernel.org/r/20240305043750.93762-9-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Muchun Song <muchun.song@linux.dev> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Peter Xu
|
2f709f7bfd |
mm/treewide: replace pmd_large() with pmd_leaf()
pmd_large() is always defined as pmd_leaf(). Merge their usages. Chose pmd_leaf() because pmd_leaf() is a global API, while pmd_large() is not. Link: https://lkml.kernel.org/r/20240305043750.93762-8-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Muchun Song <muchun.song@linux.dev> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Peter Xu
|
bd18b68822 |
mm/powerpc: replace pXd_is_leaf() with pXd_leaf()
They're the same macros underneath. Drop pXd_is_leaf(), instead always use pXd_leaf(). At the meantime, instead of renames, drop the pXd_is_leaf() fallback definitions directly in arch/powerpc/include/asm/pgtable.h. because similar fallback macros for pXd_leaf() are already defined in include/linux/pgtable.h. Link: https://lkml.kernel.org/r/20240305043750.93762-3-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Muchun Song <muchun.song@linux.dev> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Peter Xu
|
a2aa530d85 |
mm/powerpc: define pXd_large() with pXd_leaf()
Patch series "mm/treewide: Replace pXd_large() with pXd_leaf()", v3. These two APIs are mostly always the same. It's confusing to have both of them. Merge them into one. Here I used pXd_leaf() only because pXd_leaf() is a global API which is always defined, while pXd_large() is not. We have yet one more API that is similar which is pXd_huge(), but that's even trickier, so let's do it step by step. Some special cares are taken for ppc and x86, they're done as separate cleanups first. This patch (of 10): The two definitions are the same. The only difference is that pXd_large() is only defined with THP selected, and only on book3s 64bits. Instead of implementing it twice, make pXd_large() a macro to pXd_leaf(). Define it unconditionally just like pXd_leaf(). This helps to prepare merging the two APIs. Link: https://lkml.kernel.org/r/20240305043750.93762-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20240305043750.93762-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Muchun Song <muchun.song@linux.dev> Cc: Yang Shi <shy828301@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Gang Li
|
b78b27d029 |
hugetlb: parallelize 1G hugetlb initialization
Optimizing the initialization speed of 1G huge pages through
parallelization.
1G hugetlbs are allocated from bootmem, a process that is already very
fast and does not currently require optimization. Therefore, we focus on
parallelizing only the initialization phase in `gather_bootmem_prealloc`.
Here are some test results:
test case no patch(ms) patched(ms) saved
------------------- -------------- ------------- --------
256c2T(4 node) 1G 4745 2024 57.34%
128c1T(2 node) 1G 3358 1712 49.02%
12T 1G 77000 18300 76.23%
[akpm@linux-foundation.org: s/initialied/initialized/, per Alexey]
Link: https://lkml.kernel.org/r/20240222140422.393911-9-gang.li@linux.dev
Signed-off-by: Gang Li <ligang.bdlg@bytedance.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
Arnd Bergmann
|
d3e5bab923 |
arch: simplify architecture specific page size configuration
arc, arm64, parisc and powerpc all have their own Kconfig symbols in place of the common CONFIG_PAGE_SIZE_4KB symbols. Change these so the common symbols are the ones that are actually used, while leaving the arhcitecture specific ones as the user visible place for configuring it, to avoid breaking user configs. Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> (powerpc32) Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Helge Deller <deller@gmx.de> # parisc Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Michael Ellerman
|
5b9e00a600 |
powerpc/4xx: Fix warp_gpio_leds build failure
The 44x/warp_defconfig build fails with:
arch/powerpc/platforms/44x/warp.c:109:15: error: variable ‘warp_gpio_leds’ has initializer but incomplete type
109 | static struct platform_device warp_gpio_leds = {
| ^~~~~~~~~~~~~~~
Fix it by including platform_device.h.
Fixes:
|
||
|
Michael Ellerman
|
e8b1ce0e28 |
powerpc/amigaone: Make several functions static
These functions can all be static. Make them so. That also fixes no previous prototype warnings: arch/powerpc/platforms/amigaone/setup.c:28:6: error: no previous prototype for 'amigaone_show_cpuinfo' arch/powerpc/platforms/amigaone/setup.c:68:13: error: no previous prototype for 'amigaone_setup_arch' arch/powerpc/platforms/amigaone/setup.c:86:13: error: no previous prototype for 'amigaone_init_IRQ' arch/powerpc/platforms/amigaone/setup.c:126:17: error: no previous prototype for 'amigaone_restart' Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240305123410.3306253-2-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
20933531be |
powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc.
Move the prototypes into mpc10x.h which is included by all the relevant C files, fixes: arch/powerpc/platforms/embedded6xx/ls_uart.c:59:6: error: no previous prototype for 'avr_uart_configure' arch/powerpc/platforms/embedded6xx/ls_uart.c:82:6: error: no previous prototype for 'avr_uart_send' Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240305123410.3306253-1-mpe@ellerman.id.au |
||
Nathan Chancellor
|
35f20786c4 |
powerpc: xor_vmx: Add '-mhard-float' to CFLAGS
arch/powerpc/lib/xor_vmx.o is built with '-msoft-float' (from the main
powerpc Makefile) and '-maltivec' (from its CFLAGS), which causes an
error when building with clang after a recent change in main:
error: option '-msoft-float' cannot be specified with '-maltivec'
make[6]: *** [scripts/Makefile.build:243: arch/powerpc/lib/xor_vmx.o] Error 1
Explicitly add '-mhard-float' before '-maltivec' in xor_vmx.o's CFLAGS
to override the previous inclusion of '-msoft-float' (as the last option
wins), which matches how other areas of the kernel use '-maltivec', such
as AMDGPU.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/1986
Link:
|
||
|
Michael Ellerman
|
6caecacc92 |
powerpc/fsl: Fix mfpmr() asm constraint error
mfpmr() needs to be marked always inline, otherwise the compiler will
complain that the rn argument can't be passed to the asm block as an
integer:
arch/powerpc/include/asm/reg_fsl_emb.h:18:9: warning: 'asm' operand 1 probably does not match constraints
18 | asm (".machine push; "
| ^~~
arch/powerpc/include/asm/reg_fsl_emb.h:18:9: error: impossible constraint in 'asm'
Mark mtpmr() always inline also to avoid any future problems with it.
Fixes:
|
||
|
Linus Torvalds
|
e4f7900095 |
powerpc fixes for 6.8 #5
- Fix IOMMU table initialisation when doing kdump over SR-IOV. - Fix incorrect RTAS function name for resetting TCE tables. - Fix fpu_signal selftest failures since a recent change. Thanks to: Gaurav Batra, Nathan Lynch. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmXkauwTHG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgLTSD/4/boNe5MtrGgk6RtxnyWJv/p9KCMcC rRTa5pSR6HFVK3m89V17O0onL8aKyIljO5P3rDS8X4SUhr41Z9b9/FUoHv277E7a f7hgX4/901DYiMLJEt9jkfmM30IxTYkPmlft0Uus/NiesNdTcdQOO4UScSysnZac 0HM1POp32KSC2HQRc/i+WIshRnaZcC+f0PPTU/qfS/u7/pwK4eekWdayLNvvvSvH TfjV5Hu4JVDF7hBLsoY4PdqVQGVD3t3d1D5+UrhHuYzPx+Afc8rIDfJx/+o339W6 ZTXrRPOfiticfhHQvMX1AgsYr3/A0BbZj/wCvv+pPsCjZPfox9XsW6CgiMKUxVDf ifrBhvNx0fICMf+cEjH9q2dcGwMba7dZTX5HBlSXR4xLeNitUI8pt6bYCaqw7UjH ohwl9aAI7Rl1hcW6qBaviKaIDqhbmj3N4B4ZdgMAKj2gnovbF9gUSG3ARLwEjsqB qfd0c3x6UUThj4vYfGC/iI1z1LCXC8myqof6EGArLTc13R9vFv+ycx5FwERvAxtY ALNBh6LMIkKI5z8ZrGWULoXHoS2QrE1SXpQ5ooH2g9n+vLibd37JdJNcrEMf/TJZ PluhRCJcEWkw98aUSzIoRFIFpZ2wMg/uzg3KZePhRus3GhgttTqFTbrcKHhyONBO pq/EDB8FizZ9/A== =MSDF -----END PGP SIGNATURE----- Merge tag 'powerpc-6.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix IOMMU table initialisation when doing kdump over SR-IOV - Fix incorrect RTAS function name for resetting TCE tables - Fix fpu_signal selftest failures since a recent change Thanks to Gaurav Batra and Nathan Lynch. * tag 'powerpc-6.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Fix fpu_signal failures powerpc/rtas: use correct function name for resetting TCE tables powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV |
||
Christophe Leroy
|
ca3d3aa14e |
powerpc: Remove cpu-as-y completely
cpu-as-y is there to force assembler building options. But there is no
need for that. GCC is passed the necessary options and it automatically
pass the appropriate option to GAS.
GCC is given -maltivec when relevant, so no need for -Wa,-maltivec
either.
And -Wa,-many is wrong as it will hide innapropriate instructions.
Better to detect them and handle them on a case by case basis.
The setting of -Wa,-many was added by commit
|
||
|
Michael Ellerman
|
f01dbd73cc |
powerpc/fsl: Modernise mt/mfpmr
With the addition of the machine directives, these are no longer simple 1-2 liner macros. So modernise them to be static inlines and use named asm parameters. Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240229122521.762431-4-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
5f491356b7 |
powerpc/fsl: Fix mfpmr build errors with newer binutils
Binutils 2.38 complains about the use of mfpmr when building
ppc6xx_defconfig:
CC arch/powerpc/kernel/pmc.o
{standard input}: Assembler messages:
{standard input}:45: Error: unrecognized opcode: `mfpmr'
{standard input}:56: Error: unrecognized opcode: `mtpmr'
This is because by default the kernel is built with -mcpu=powerpc, and
the mt/mfpmr instructions are not defined.
It can be avoided by enabling CONFIG_E300C3_CPU, but just adding that to
the defconfig will leave open the possibility of randconfig failures.
So add machine directives around the mt/mfpmr instructions to tell
binutils how to assemble them.
Cc: stable@vger.kernel.org
Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229122521.762431-3-mpe@ellerman.id.au
|
||
|
Michael Ellerman
|
4e284e38ed |
powerpc/64s: Use .machine power4 around dcbt
There are multiple decodings for the "dcbt" mnemonic, so the assembler has to pick one. That requires passing -many to the assembler, which is not recommended. Without -many the clang 14 / binutils 2.38 build fails with: arch/powerpc/kernel/exceptions-64s.S:2976: Error: junk at end of line: `0b01010' clang: error: assembler command failed with exit code 1 (use -v to see invocation) Fix it by adding .machine directives around the use of dcbt to specify which encoding is desired. Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240229122521.762431-2-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
8488cdcb00 |
powerpc/64s: Move dcbt/dcbtst sequence into a macro
There's an almost identical code sequence to specify load/store access hints in __copy_tofrom_user_power7(), copypage_power7() and memcpy_power7(). Move the sequence into a common macro, which is passed the registers to use as they differ slightly. There also needs to be a copy in the selftests, it could be shared in future if the headers are cleaned up / refactored. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240229122521.762431-1-mpe@ellerman.id.au |
||
Kunwu Chan
|
d9cf600ecb |
powerpc/mm: Code cleanup for __hash_page_thp
This part was commented from commit
|
||
Kajol Jain
|
ad86d7ee43 |
powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks
Running event hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/
in one of the system throws below error:
---Logs---
# perf list | grep hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles
hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=?/[Kernel PMU event]
# perf stat -v -e hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ sleep 2
Using CPUID 00800200
Control descriptor is not initialized
Warning:
hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ event is not supported by the kernel.
failed to read counter hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/
Performance counter stats for 'system wide':
<not supported> hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/
2.000700771 seconds time elapsed
The above error is because of the hcall failure as required
permission "Enable Performance Information Collection" is not set.
Based on current code, single_gpci_request function did not check the
error type incase hcall fails and by default returns EINVAL. But we can
have other reasons for hcall failures like H_AUTHORITY/H_PARAMETER with
detail_rc as GEN_BUF_TOO_SMALL, for which we need to act accordingly.
Fix this issue by adding new checks in the single_gpci_request and
h_gpci_event_init functions.
Result after fix patch changes:
# perf stat -e hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ sleep 2
Error:
No permission to enable hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ event.
Fixes:
|
||
|
Michael Ellerman
|
4eb20bf34e |
powerpc/irq: Allow softirq to hardirq stack transition
Allow a transition from the softirq stack to the hardirq stack when handling a hardirq. Doing so means a hardirq received while deep in softirq processing is less likely to cause a stack overflow of the softirq stack. Previously it wasn't safe to do so because irq_exit() (which initiates softirq processing) was called on the hardirq stack. That was changed in commit |
||
|
Christophe Leroy
|
2a066ae118 |
powerpc: Stop using of_root
Replace all usages of of_root by of_find_node_by_path("/")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231214103152.12269-5-mpe@ellerman.id.au
|
||
|
Christophe Leroy
|
28da734d58 |
powerpc/machdep: Define 'compatibles' property in ppc_md and use it
Most probe functions that do not use the 'compatible' string do nothing else than checking whether the machine is compatible with one of the strings in a NULL terminated table of strings. Define that table of strings in ppc_md structure and check it directly from probe_machine() instead of using ppc_md.probe() for that. Keep checking in ppc_md.probe() only for more complex probing. All .compatible could be replaced with a single element NULL terminated list but that's not worth the churn. Can be do incrementaly in follow-up patches. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231214103152.12269-4-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
af1ebca503 |
powerpc: Add allmodconfig for all 32-bit sub-arches
32-bit powerpc kernels can be built for one of 5 sub-arches, see Kconfig.cputype: PPC_BOOK3S_32: "512x/52xx/6xx/7xx/74xx/82xx/83xx/86xx" PPC_85xx: "Freescale 85xx" PPC_8xx: "Freescale 8xx" 40x: "AMCC 40x" 44x: "AMCC 44x, 46x or 47x" By default none of these are built for a plain allmodconfig build, because it selects PPC64 which builds a 64-bit kernel. There is already a ppc32_allmodconfig, which enables PPC_BOOK3S_32. Add similar targets for the other 32-bit sub-arches to increase build coverage: ppc40x_allmodconfig ppc44x_allmodconfig ppc8xx_allmodconfig ppc85xx_allmodconfig Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240229114108.743810-1-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
3f9f3557ac |
powerpc/85xx: Make some pic_init functions static
These functions can all be static, make them so, which also fixes no previous prototype warnings. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240229114216.744502-1-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
f2d5bccaca |
powerpc/boot: Only free if realloc() succeeds
simple_realloc() frees the original buffer (ptr) even if the reallocation failed. Fix it to behave like standard realloc() and only free the original buffer if the reallocation succeeded. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240229115149.749264-1-mpe@ellerman.id.au |
||
Li zeming
|
69b0194cce |
powerpc/boot: Handle allocation failure in simple_realloc()
simple_malloc() will return NULL when there is not enough memory left. Check pointer 'new' before using it to copy the old data. Signed-off-by: Li zeming <zeming@nfschina.com> [mpe: Reword subject, use change log from Christophe] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20221219021816.3012-1-zeming@nfschina.com |
||
Qiheng Lin
|
cda9c0d556 |
powerpc/pseries: Fix potential memleak in papr_get_attr()
`buf` is allocated in papr_get_attr(), and krealloc() of `buf`
could fail. We need to free the original `buf` in the case of failure.
Fixes:
|
||
Sathvika Vasireddy
|
6035e7e354 |
powerpc/32: Curb objtool unannotated intra-function call warning
objtool throws the following warning: arch/powerpc/kexec/relocate_32.o: warning: objtool: .text+0x2bc: unannotated intra-function call Fix this warning by annotating intra-function call, using ANNOTATE_INTRA_FUNCTION_CALL macro, to indicate that the branch target is valid. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20221215115258.80810-1-sv@linux.ibm.com |
||
|
Michael Ellerman
|
b72c066ba8 |
powerpc/32: fix ADB_CUDA kconfig warning
Fix a (randconfig) kconfig warning by correcting the select
statement:
WARNING: unmet direct dependencies detected for ADB_CUDA
Depends on [n]: MACINTOSH_DRIVERS [=n] && (ADB [=n] || PPC_PMAC [=y]) && !PPC_PMAC64 [=n]
Selected by [y]:
- PPC_PMAC [=y] && PPC_BOOK3S [=y] && CPU_BIG_ENDIAN [=y] && POWER_RESET [=y] && PPC32 [=y]
The PPC32 isn't needed because ADB depends on (PPC_PMAC && PPC32).
Fixes:
|
||
Brian King
|
b997bf240e |
powerpc: Enable support for 32 bit MSI-X vectors
Some devices are not capable of addressing 64 bits via DMA, which includes MSI-X vectors. This allows us to ensure these devices use MSI-X vectors in 32 bit space. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240117214632.134539-1-brking@linux.vnet.ibm.com |
||
|
Christophe Leroy
|
9cbacb834b |
powerpc: Don't ignore errors from set_memory_{n}p() in __kernel_map_pages()
set_memory_p() and set_memory_np() can fail. As mentioned in linux/mm.h: /* * To support DEBUG_PAGEALLOC architecture must ensure that * __kernel_map_pages() never fails */ So panic in case set_memory_p() or set_memory_np() fail in __kernel_map_pages(). Link: https://github.com/KSPP/linux/issues/7 Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20ef75884aa6a636e8298736f3d1056b0793d3d9.1708078640.git.christophe.leroy@csgroup.eu |
||
|
Christophe Leroy
|
3c8016e681 |
powerpc: Refactor __kernel_map_pages()
__kernel_map_pages() is almost identical for PPC32 and RADIX. Refactor it. On PPC32 it is not needed for KFENCE, but to keep it simple just make it similar to PPC64. Move the prototype of hash__kernel_map_pages() into mmu_decl.h to allow IS_ENABLED() to work on 32-bit. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/3656d47c53bff577739dac536dbae31fff52f6d8.1708078640.git.christophe.leroy@csgroup.eu |
||
Serge Semin
|
19e7b35d8a |
powerpc: dts: akebono: Harmonize EHCI/OHCI DT nodes name
In accordance with the Generic EHCI/OHCI bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible nodes are correctly named. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20240222174456.25903-2-Sergey.Semin@baikalelectronics.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Alex Shi
|
54de442747 |
sched/topology: Rename SD_SHARE_PKG_RESOURCES to SD_SHARE_LLC
SD_SHARE_PKG_RESOURCES is a bit of a misnomer: its naming suggests that it's sharing all 'package resources' - while in reality it's specifically for sharing the LLC only. Rename it to SD_SHARE_LLC to reduce confusion. [ mingo: Rewrote the confusing changelog as well. ] Suggested-by: Valentin Schneider <vschneid@redhat.com> Signed-off-by: Alex Shi <alexs@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Valentin Schneider <vschneid@redhat.com> Reviewed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Reviewed-by: Barry Song <baohua@kernel.org> Link: https://lore.kernel.org/r/20240210113924.1130448-5-alexs@kernel.org |
||
Daniel Vetter
|
f112b68f27 |
Linux 6.8-rc6
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmXb0T4eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5YQH/3eCV90sNGch0Y94 8rtTdqFrVx7QPNl0pz+Mo6OUIKUUHvTuwime16ckLxG+3x2Y3I0MjP1edd1NB99C Kje//JTpaZBPpTZ/jY4u8B1Shov2Drdx/J4NFnE/9rG6yXzKQBtvON/xAxXDCVHT mLhst2LR0FeCSMk9jAX6CoqUPEgwlylNyAetKxaDQgoHl4GTZC7FDO17WxyjpIxe 1rVHsrV9Eq8kD4uxrzpTYWgZrwTObPmlZjvefa1JfzSwRNABIBJj/C1nra1Zc1oi b7xVaXS1cMOxrtuuG00fmHsPnWivu0tuND7H3/yLd1mRCZAPSsVbVvrI/KNtoeV4 1euINlY= =7IFt -----END PGP SIGNATURE----- Merge v6.8-rc6 into drm-next Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches, there's a few same-area-changed conflicts (xe and amdgpu mostly) that are getting a bit too annoying. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> |
||
|
Linus Torvalds
|
ab0a97cffa |
powerpc fixes for 6.8 #4
- Fix a crash when hot adding a PCI device to an LPAR since recent changes. - Fix nested KVM level-2 guest reboot failure due to empty 'arch_compat'. Thanks to: Amit Machhiwal, Aneesh Kumar K.V (IBM), Brian King, Gaurav Batra, Vaibhav Jain. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmXaf8kTHG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgJUyEACK+gmbPJxVwRnt60e7l8SJrjaXE9ZH llI2ffSM63KOL0qeJlWj8EfNcmU3ihCnMpVS4VHAIvEvCq8KBdcHh7EfLmIjMSl2 oHfcb+dpdnWpQUkI2jci6ptxv8Al7hmd5kP6X5TGn0XJaXWatW4tj7QDP574DCZY UfbHGvGnCVmlcxm3xhn7JzJT4Lgj9ehxgZEMHB68qfwU2rJgUXNITBzOsGwfq4c0 wiIdzVGMuJQdaFLt0JLNP2KY8kpVsAeKRYgSsLrkDkp+tKOIPvgeBmC221pOb1Y4 iZbpXR3h06WfFBnA2PJpdfuacN55/gF0U5BnyOj5tB7CTx65oTyX/BJLIocKWAlF hRRPVEYqBH0mZCHXn03+J/A2/iut1XxDlVMpEhjjZjb57CTYCApSpHer6shPw6PV QqG+iAr7lBCZ70qS2m2+mjPhgDf5TNlxlsip7S3xJJpJvScN/JyPDupDF7tQYuHD GjIOm8gSHL0i3F4L3NAZ9FtPRwxXcv85sWCTbE7jsfVOT/kkDGTwhx/vdPIR0la8 agDv/Q0FyyFHWd5IS4oqXFop6P3boulHexdIec/MIhBrPSZ6oG0ySzj3rqdI7VYh 7BYj/cHerKONR/BU6S3vKddh9RDD9Fe5ghEAgng2DxG+Za/m/M2v/76123/ZeZuw qQ8aiIvYOJ4DGA== =+tcX -----END PGP SIGNATURE----- Merge tag 'powerpc-6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix a crash when hot adding a PCI device to an LPAR since recent changes - Fix nested KVM level-2 guest reboot failure due to empty 'arch_compat' Thanks to Amit Machhiwal, Aneesh Kumar K.V (IBM), Brian King, Gaurav Batra, and Vaibhav Jain. * tag 'powerpc-6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Book3S HV: Fix L2 guest reboot failure due to empty 'arch_compat' powerpc/pseries/iommu: DLPAR add doesn't completely initialize pci_controller |
||
Baoquan He
|
199da8714c |
arch, crash: move arch_crash_save_vmcoreinfo() out to file vmcore_info.c
Nathan reported below building error: ===== $ curl -LSso .config https://git.alpinelinux.org/aports/plain/community/linux-edge/config-edge.armv7 $ make -skj"$(nproc)" ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- olddefconfig all .. arm-linux-gnueabi-ld: arch/arm/kernel/machine_kexec.o: in function `arch_crash_save_vmcoreinfo': machine_kexec.c:(.text+0x488): undefined reference to `vmcoreinfo_append_str' ==== On architecutres, like arm, s390, ppc, sh, function arch_crash_save_vmcoreinfo() is located in machine_kexec.c and it can only be compiled in when CONFIG_KEXEC_CORE=y. That's not right because arch_crash_save_vmcoreinfo() is used to export arch specific vmcoreinfo. CONFIG_VMCORE_INFO is supposed to control its compiling in. However, CONFIG_VMVCORE_INFO could be independent of CONFIG_KEXEC_CORE, e.g CONFIG_PROC_KCORE=y will select CONFIG_VMVCORE_INFO. Or CONFIG_KEXEC/CONFIG_KEXEC_FILE is set while CONFIG_CRASH_DUMP is not set, it will report linking error. So, on arm, s390, ppc and sh, move arch_crash_save_vmcoreinfo out to a new file vmcore_info.c. Let CONFIG_VMCORE_INFO decide if compiling in arch_crash_save_vmcoreinfo(). [akpm@linux-foundation.org: remove stray newlines at eof] Link: https://lkml.kernel.org/r/20240129135033.157195-3-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Reported-by: Nathan Chancellor <nathan@kernel.org> Closes: https://lore.kernel.org/all/20240126045551.GA126645@dev-arch.thelio-3990X/T/#u Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Klara Modin <klarasmodin@gmail.com> Cc: Michael Kelley <mhklinux@outlook.com> Cc: Pingfan Liu <piliu@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Baoquan He
|
086d67ef33 |
ppc, crash: enforce KEXEC and KEXEC_FILE to select CRASH_DUMP
In PowerPC, the crash dumping and kexec reboot share code in arch_kexec_locate_mem_hole(), in which struct crash_mem is used. Here enfoce enforce KEXEC and KEXEC_FILE to select CRASH_DUMP for now. [bhe@redhat.com: fix allnoconfig on ppc] Link: https://lkml.kernel.org/r/ZbJwMyCpz4HDySoo@MiWiFi-R3L-srv Link: https://lkml.kernel.org/r/20240124051254.67105-9-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Pingfan Liu <piliu@redhat.com> Cc: Klara Modin <klarasmodin@gmail.com> Cc: Michael Kelley <mhklinux@outlook.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Baoquan He
|
2c44b67e2e |
crash: remove dependency of FA_DUMP on CRASH_DUMP
In kdump kernel, /proc/vmcore is an elf file mapping the crashed kernel's old memory content. Its elf header is constructed in 1st kernel and passed to kdump kernel via elfcorehdr_addr. Config CRASH_DUMP enables the code of 1st kernel's old memory accessing in different architectures. Currently, config FA_DUMP has dependency on CRASH_DUMP because fadump needs access global variable 'elfcorehdr_addr' to judge if it's in kdump kernel within function is_kdump_kernel(). In the current kernel/crash_dump.c, variable 'elfcorehdr_addr' is defined, and function setup_elfcorehdr() used to parse kernel parameter to fetch the passed value of elfcorehdr_addr. Only for accessing elfcorehdr_addr, FA_DUMP really doesn't have to depends on CRASH_DUMP. To remove the dependency of FA_DUMP on CRASH_DUMP to avoid confusion, rename kernel/crash_dump.c to kernel/elfcorehdr.c, and build it when CONFIG_VMCORE_INFO is ebabled. With this, FA_DUMP doesn't need to depend on CRASH_DUMP. [bhe@redhat.com: power/fadump: make FA_DUMP select CRASH_DUMP] Link: https://lkml.kernel.org/r/Zb8D1ASrgX0qVm9z@MiWiFi-R3L-srv Link: https://lkml.kernel.org/r/20240124051254.67105-4-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Pingfan Liu <piliu@redhat.com> Cc: Klara Modin <klarasmodin@gmail.com> Cc: Michael Kelley <mhklinux@outlook.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Baoquan He
|
443cbaf9e2 |
crash: split vmcoreinfo exporting code out from crash_core.c
Now move the relevant codes into separate files:
kernel/crash_reserve.c, include/linux/crash_reserve.h.
And add config item CRASH_RESERVE to control its enabling.
And also update the old ifdeffery of CONFIG_CRASH_CORE, including of
<linux/crash_core.h> and config item dependency on CRASH_CORE
accordingly.
And also do renaming as follows:
- arch/xxx/kernel/{crash_core.c => vmcore_info.c}
because they are only related to vmcoreinfo exporting on x86, arm64,
riscv.
And also Remove config item CRASH_CORE, and rely on CONFIG_KEXEC_CORE to
decide if build in crash_core.c.
[yang.lee@linux.alibaba.com: remove duplicated include in vmcore_info.c]
Link: https://lkml.kernel.org/r/20240126005744.16561-1-yang.lee@linux.alibaba.com
Link: https://lkml.kernel.org/r/20240124051254.67105-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Baoquan He
|
85fcde402d |
kexec: split crashkernel reservation code out from crash_core.c
Patch series "Split crash out from kexec and clean up related config items", v3. Motivation: ============= Previously, LKP reported a building error. When investigating, it can't be resolved reasonablly with the present messy kdump config items. https://lore.kernel.org/oe-kbuild-all/202312182200.Ka7MzifQ-lkp@intel.com/ The kdump (crash dumping) related config items could causes confusions: Firstly, CRASH_CORE enables codes including - crashkernel reservation; - elfcorehdr updating; - vmcoreinfo exporting; - crash hotplug handling; Now fadump of powerpc, kcore dynamic debugging and kdump all selects CRASH_CORE, while fadump - fadump needs crashkernel parsing, vmcoreinfo exporting, and accessing global variable 'elfcorehdr_addr'; - kcore only needs vmcoreinfo exporting; - kdump needs all of the current kernel/crash_core.c. So only enabling PROC_CORE or FA_DUMP will enable CRASH_CORE, this mislead people that we enable crash dumping, actual it's not. Secondly, It's not reasonable to allow KEXEC_CORE select CRASH_CORE. Because KEXEC_CORE enables codes which allocate control pages, copy kexec/kdump segments, and prepare for switching. These codes are shared by both kexec reboot and kdump. We could want kexec reboot, but disable kdump. In that case, CRASH_CORE should not be selected. -------------------- CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_KEXEC=y CONFIG_KEXEC_FILE=y --------------------- Thirdly, It's not reasonable to allow CRASH_DUMP select KEXEC_CORE. That could make KEXEC_CORE, CRASH_DUMP are enabled independently from KEXEC or KEXEC_FILE. However, w/o KEXEC or KEXEC_FILE, the KEXEC_CORE code built in doesn't make any sense because no kernel loading or switching will happen to utilize the KEXEC_CORE code. --------------------- CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_CRASH_DUMP=y --------------------- In this case, what is worse, on arch sh and arm, KEXEC relies on MMU, while CRASH_DUMP can still be enabled when !MMU, then compiling error is seen as the lkp test robot reported in above link. ------arch/sh/Kconfig------ config ARCH_SUPPORTS_KEXEC def_bool MMU config ARCH_SUPPORTS_CRASH_DUMP def_bool BROKEN_ON_SMP --------------------------- Changes: =========== 1, split out crash_reserve.c from crash_core.c; 2, split out vmcore_infoc. from crash_core.c; 3, move crash related codes in kexec_core.c into crash_core.c; 4, remove dependency of FA_DUMP on CRASH_DUMP; 5, clean up kdump related config items; 6, wrap up crash codes in crash related ifdefs on all 8 arch-es which support crash dumping, except of ppc; Achievement: =========== With above changes, I can rearrange the config item logic as below (the right item depends on or is selected by the left item): PROC_KCORE -----------> VMCORE_INFO |----------> VMCORE_INFO FA_DUMP----| |----------> CRASH_RESERVE ---->VMCORE_INFO / |---->CRASH_RESERVE KEXEC --| /| |--> KEXEC_CORE--> CRASH_DUMP-->/-|---->PROC_VMCORE KEXEC_FILE --| \ | \---->CRASH_HOTPLUG KEXEC --| |--> KEXEC_CORE (for kexec reboot only) KEXEC_FILE --| Test ======== On all 8 architectures, including x86_64, arm64, s390x, sh, arm, mips, riscv, loongarch, I did below three cases of config item setting and building all passed. Take configs on x86_64 as exampmle here: (1) Both CONFIG_KEXEC and KEXEC_FILE is unset, then all kexec/kdump items are unset automatically: # Kexec and crash features # CONFIG_KEXEC is not set # CONFIG_KEXEC_FILE is not set # end of Kexec and crash features (2) set CONFIG_KEXEC_FILE and 'make olddefconfig': --------------- # Kexec and crash features CONFIG_CRASH_RESERVE=y CONFIG_VMCORE_INFO=y CONFIG_KEXEC_CORE=y CONFIG_KEXEC_FILE=y CONFIG_CRASH_DUMP=y CONFIG_CRASH_HOTPLUG=y CONFIG_CRASH_MAX_MEMORY_RANGES=8192 # end of Kexec and crash features --------------- (3) unset CONFIG_CRASH_DUMP in case 2 and execute 'make olddefconfig': ------------------------ # Kexec and crash features CONFIG_KEXEC_CORE=y CONFIG_KEXEC_FILE=y # end of Kexec and crash features ------------------------ Note: For ppc, it needs investigation to make clear how to split out crash code in arch folder. Hope Hari and Pingfan can help have a look, see if it's doable. Now, I make it either have both kexec and crash enabled, or disable both of them altogether. This patch (of 14): Both kdump and fa_dump of ppc rely on crashkernel reservation. Move the relevant codes into separate files: crash_reserve.c, include/linux/crash_reserve.h. And also add config item CRASH_RESERVE to control its enabling of the codes. And update config items which has relationship with crashkernel reservation. And also change ifdeffery from CONFIG_CRASH_CORE to CONFIG_CRASH_RESERVE when those scopes are only crashkernel reservation related. And also rename arch/XXX/include/asm/{crash_core.h => crash_reserve.h} on arm64, x86 and risc-v because those architectures' crash_core.h is only related to crashkernel reservation. [akpm@linux-foundation.org: s/CRASH_RESEERVE/CRASH_RESERVE/, per Klara Modin] Link: https://lkml.kernel.org/r/20240124051254.67105-1-bhe@redhat.com Link: https://lkml.kernel.org/r/20240124051254.67105-2-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Pingfan Liu <piliu@redhat.com> Cc: Klara Modin <klarasmodin@gmail.com> Cc: Michael Kelley <mhklinux@outlook.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Oliver Upton
|
284851ee5c |
KVM: Get rid of return value from kvm_arch_create_vm_debugfs()
The general expectation with debugfs is that any initialization failure is nonfatal. Nevertheless, kvm_arch_create_vm_debugfs() allows implementations to return an error and kvm_create_vm_debugfs() allows that to fail VM creation. Change to a void return to discourage architectures from making debugfs failures fatal for the VM. Seems like everyone already had the right idea, as all implementations already return 0 unconditionally. Acked-by: Marc Zyngier <maz@kernel.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lore.kernel.org/r/20240216155941.2029458-1-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
Nathan Lynch
|
fad87dbd48 |
powerpc/rtas: use correct function name for resetting TCE tables
The PAPR spec spells the function name as
"ibm,reset-pe-dma-windows"
but in practice firmware uses the singular form:
"ibm,reset-pe-dma-window"
in the device tree. Since we have the wrong spelling in the RTAS
function table, reverse lookups (token -> name) fail and warn:
unexpected failed lookup for token 86
WARNING: CPU: 1 PID: 545 at arch/powerpc/kernel/rtas.c:659 __do_enter_rtas_trace+0x2a4/0x2b4
CPU: 1 PID: 545 Comm: systemd-udevd Not tainted 6.8.0-rc4 #30
Hardware name: IBM,9105-22A POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NL1060_028) hv:phyp pSeries
NIP [c0000000000417f0] __do_enter_rtas_trace+0x2a4/0x2b4
LR [c0000000000417ec] __do_enter_rtas_trace+0x2a0/0x2b4
Call Trace:
__do_enter_rtas_trace+0x2a0/0x2b4 (unreliable)
rtas_call+0x1f8/0x3e0
enable_ddw.constprop.0+0x4d0/0xc84
dma_iommu_dma_supported+0xe8/0x24c
dma_set_mask+0x5c/0xd8
mlx5_pci_init.constprop.0+0xf0/0x46c [mlx5_core]
probe_one+0xfc/0x32c [mlx5_core]
local_pci_probe+0x68/0x12c
pci_call_probe+0x68/0x1ec
pci_device_probe+0xbc/0x1a8
really_probe+0x104/0x570
__driver_probe_device+0xb8/0x224
driver_probe_device+0x54/0x130
__driver_attach+0x158/0x2b0
bus_for_each_dev+0xa8/0x120
driver_attach+0x34/0x48
bus_add_driver+0x174/0x304
driver_register+0x8c/0x1c4
__pci_register_driver+0x68/0x7c
mlx5_init+0xb8/0x118 [mlx5_core]
do_one_initcall+0x60/0x388
do_init_module+0x7c/0x2a4
init_module_from_file+0xb4/0x108
idempotent_init_module+0x184/0x34c
sys_finit_module+0x90/0x114
And oopses are possible when lockdep is enabled or the RTAS
tracepoints are active, since those paths dereference the result of
the lookup.
Use the correct spelling to match firmware's behavior, adjusting the
related constants to match.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes:
|
||
Gaurav Batra
|
09a3c1e461 |
powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV
When kdump kernel tries to copy dump data over SR-IOV, LPAR panics due to NULL pointer exception: Kernel attempted to read user page (0) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc000000020847ad4 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: mlx5_core(+) vmx_crypto pseries_wdt papr_scm libnvdimm mlxfw tls psample sunrpc fuse overlay squashfs loop CPU: 12 PID: 315 Comm: systemd-udevd Not tainted 6.4.0-Test102+ #12 Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries NIP: c000000020847ad4 LR: c00000002083b2dc CTR: 00000000006cd18c REGS: c000000029162ca0 TRAP: 0300 Not tainted (6.4.0-Test102+) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48288244 XER: 00000008 CFAR: c00000002083b2d8 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 1 ... NIP _find_next_zero_bit+0x24/0x110 LR bitmap_find_next_zero_area_off+0x5c/0xe0 Call Trace: dev_printk_emit+0x38/0x48 (unreliable) iommu_area_alloc+0xc4/0x180 iommu_range_alloc+0x1e8/0x580 iommu_alloc+0x60/0x130 iommu_alloc_coherent+0x158/0x2b0 dma_iommu_alloc_coherent+0x3c/0x50 dma_alloc_attrs+0x170/0x1f0 mlx5_cmd_init+0xc0/0x760 [mlx5_core] mlx5_function_setup+0xf0/0x510 [mlx5_core] mlx5_init_one+0x84/0x210 [mlx5_core] probe_one+0x118/0x2c0 [mlx5_core] local_pci_probe+0x68/0x110 pci_call_probe+0x68/0x200 pci_device_probe+0xbc/0x1a0 really_probe+0x104/0x540 __driver_probe_device+0xb4/0x230 driver_probe_device+0x54/0x130 __driver_attach+0x158/0x2b0 bus_for_each_dev+0xa8/0x130 driver_attach+0x34/0x50 bus_add_driver+0x16c/0x300 driver_register+0xa4/0x1b0 __pci_register_driver+0x68/0x80 mlx5_init+0xb8/0x100 [mlx5_core] do_one_initcall+0x60/0x300 do_init_module+0x7c/0x2b0 At the time of LPAR dump, before kexec hands over control to kdump kernel, DDWs (Dynamic DMA Windows) are scanned and added to the FDT. For the SR-IOV case, default DMA window "ibm,dma-window" is removed from the FDT and DDW added, for the device. Now, kexec hands over control to the kdump kernel. When the kdump kernel initializes, PCI busses are scanned and IOMMU group/tables created, in pci_dma_bus_setup_pSeriesLP(). For the SR-IOV case, there is no "ibm,dma-window". The original commit: |
||
|
Nathan Chancellor
|
9a12e9a165 |
powerpc: Kconfig: remove tautology in CONFIG_COMPAT
This reverts commit
|
||
|
Nathan Chancellor
|
2947a4567f |
treewide: update LLVM Bugzilla links
LLVM moved their issue tracker from their own Bugzilla instance to GitHub issues. While all of the links are still valid, they may not necessarily show the most up to date information around the issues, as all updates will occur on GitHub, not Bugzilla. Another complication is that the Bugzilla issue number is not always the same as the GitHub issue number. Thankfully, LLVM maintains this mapping through two shortlinks: https://llvm.org/bz<num> -> https://bugs.llvm.org/show_bug.cgi?id=<num> https://llvm.org/pr<num> -> https://github.com/llvm/llvm-project/issues/<mapped_num> Switch all "https://bugs.llvm.org/show_bug.cgi?id=<num>" links to the "https://llvm.org/pr<num>" shortlink so that the links show the most up to date information. Each migrated issue links back to the Bugzilla entry, so there should be no loss of fidelity of information here. Link: https://lkml.kernel.org/r/20240109-update-llvm-links-v1-3-eb09b59db071@kernel.org Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Fangrui Song <maskray@google.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Mykola Lysenko <mykolal@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
David Hildenbrand
|
4d5bf0b618 |
mm/mmu_gather: add tlb_remove_tlb_entries()
Let's add a helper that lets us batch-process multiple consecutive PTEs. Note that the loop will get optimized out on all architectures except on powerpc. We have to add an early define of __tlb_remove_tlb_entry() on ppc to make the compiler happy (and avoid making tlb_remove_tlb_entries() a macro). [arnd@kernel.org: change __tlb_remove_tlb_entry() to an inline function] Link: https://lkml.kernel.org/r/20240221154549.2026073-1-arnd@kernel.org Link: https://lkml.kernel.org/r/20240214204435.167852-8-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Anshuman Khandual
|
ce70cfb145 |
mm/hugetlb: move page order check inside hugetlb_cma_reserve()
All platforms could benefit from page order check against MAX_PAGE_ORDER before allocating a CMA area for gigantic hugetlb pages. Let's move this check from individual platforms to generic hugetlb. Link: https://lkml.kernel.org/r/20240209054221.1403364-1-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Jane Chu <jane.chu@oracle.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
David Hildenbrand
|
802cc2ab33 |
powerpc/mm: use pte_next_pfn() in set_ptes()
Let's use our handy new helper. Note that the implementation is slightly different, but shouldn't really make a difference in practice. Link: https://lkml.kernel.org/r/20240129124649.189745-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
David Hildenbrand
|
f7dc4d689e |
powerpc/pgtable: define PFN_PTE_SHIFT
We want to make use of pte_next_pfn() outside of set_ptes(). Let's simply define PFN_PTE_SHIFT, required by pte_next_pfn(). Link: https://lkml.kernel.org/r/20240129124649.189745-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Christophe Leroy
|
6cdc82db0c |
mm: ptdump: have ptdump_check_wx() return bool
Have ptdump_check_wx() return true when the check is successful or false otherwise. [akpm@linux-foundation.org: fix a couple of build issues (x86_64 allmodconfig)] Link: https://lkml.kernel.org/r/7943149fe955458cb7b57cd483bf41a3aad94684.1706610398.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Greg KH <greg@kroah.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Phong Tran <tranmanphong@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Steven Price <steven.price@arm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Christophe Leroy
|
592e15f62f |
powerpc,s390: ptdump: define ptdump_check_wx() regardless of CONFIG_DEBUG_WX
Following patch will use ptdump_check_wx() regardless of CONFIG_DEBUG_WX, so define it at all times on powerpc and s390 just like other architectures. Though keep the WARN_ON_ONCE() only when CONFIG_DEBUG_WX is set. Link: https://lkml.kernel.org/r/07bfb04c7fec58e84413e91d2533581be357a696.1706610398.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Greg KH <greg@kroah.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Phong Tran <tranmanphong@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Steven Price <steven.price@arm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Christophe Leroy
|
a5e8131a03 |
arm64, powerpc, riscv, s390, x86: ptdump: refactor CONFIG_DEBUG_WX
All architectures using the core ptdump functionality also implement CONFIG_DEBUG_WX, and they all do it more or less the same way, with a function called debug_checkwx() that is called by mark_rodata_ro(), which is a substitute to ptdump_check_wx() when CONFIG_DEBUG_WX is set and a no-op otherwise. Refactor by centrally defining debug_checkwx() in linux/ptdump.h and call debug_checkwx() immediately after calling mark_rodata_ro() instead of calling it at the end of every mark_rodata_ro(). On x86_32, mark_rodata_ro() first checks __supported_pte_mask has _PAGE_NX before calling debug_checkwx(). Now the check is inside the callee ptdump_walk_pgd_level_checkwx(). On powerpc_64, mark_rodata_ro() bails out early before calling ptdump_check_wx() when the MMU doesn't have KERNEL_RO feature. The check is now also done in ptdump_check_wx() as it is called outside mark_rodata_ro(). Link: https://lkml.kernel.org/r/a59b102d7964261d31ead0316a9f18628e4e7a8e.1706610398.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Greg KH <greg@kroah.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Phong Tran <tranmanphong@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Steven Price <steven.price@arm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Christophe Leroy
|
f7f18e30b4 |
powerpc/kprobes: Handle error returned by set_memory_rox()
set_memory_rox() can fail. In case it fails, free allocated memory and return NULL. Link: https://github.com/KSPP/linux/issues/7 Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/b4907cf4339bd086abc40430d91311436cb0c18e.1708078401.git.christophe.leroy@csgroup.eu |
||
|
Christophe Leroy
|
09ca1b1171 |
powerpc: Implement set_memory_rox()
Same as x86 and s390, add set_memory_rox() to avoid doing one pass with set_memory_ro() and a second pass with set_memory_x(). See commit |
||
|
Christophe Leroy
|
d5835fb60b |
powerpc: Use user_mode() macro when possible
There is a nice macro to check user mode. Use it instead of open coding anding with MSR_PR to increase readability and avoid having to comment what that anding is for. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/fbf74887dcf1f1ba9e1680fc3247cbb581b00662.1708078228.git.christophe.leroy@csgroup.eu |
||
|
Christophe Leroy
|
9e00743aba |
powerpc/trace: Restrict hash_fault trace event to HASH MMU
'perf list' on powerpc 8xx shows an event named "1:hash_fault". This event is pointless because trace_hash_fault() is called only from mm/book3s64/hash_utils.c Only define it when CONFIG_PPC_64S_HASH_MMU is selected. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/85a86e51b4ab26ce4b592984cc0a0851a3cc9479.1708076780.git.christophe.leroy@csgroup.eu |
||
Uwe Kleine-König
|
a3e1820186 |
powerpc: pmi: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/3201daed6d19c01ee0ee72e0f9302a38ecef3577.1708529736.git.u.kleine-koenig@pengutronix.de |
||
|
Uwe Kleine-König
|
e2064de2f3 |
powerpc: fsl_msi: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/42d8e3721053dce21ea373a24cb37fb0f59eed26.1708529736.git.u.kleine-koenig@pengutronix.de |
||
|
Uwe Kleine-König
|
18a4a2612b |
powerpc: papr_scm: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/34847d756453af2e85e5944a8cc2e2c21aacc905.1708529736.git.u.kleine-koenig@pengutronix.de |
||
|
Uwe Kleine-König
|
ca899c1221 |
powerpc: opal-prd: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/28dd12b7cbde4b278b8b1d0ae4382dbd8ce9c9c5.1708529736.git.u.kleine-koenig@pengutronix.de |
||
|
Uwe Kleine-König
|
b1cd248f42 |
powerpc: gpio_mdio: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/8a5ac8044578694879e919322dbd46f140b64950.1708529736.git.u.kleine-koenig@pengutronix.de |
||
|
Uwe Kleine-König
|
9d16a8591a |
powerpc: sgy_cts1000: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/1e8396078942d9e46e56d70ed2f749a76391c381.1708529736.git.u.kleine-koenig@pengutronix.de |
||
Geoff Levand
|
914d081ead |
Revert "powerpc/ps3_defconfig: Disable PPC64_BIG_ENDIAN_ELF_ABI_V2"
This reverts commit
|
||
Nicholas Piggin
|
28b2ed8675 |
powerpc/ps3: Make real stack frames for LV1 hcalls
The PS3 hcall assembly code makes ad-hoc stack frames that don't have a back-chain pointer or meet other requirements like minimum frame size. This probably confuses stack unwinders. Give all hcalls a real stack frame. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Geoff Levand <geoff@infradead.org> [mpe: Add missing \ in LV1_2_IN_4_OUT] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231227072405.63751-4-npiggin@gmail.com |
||
|
Nicholas Piggin
|
d901473c4d |
powerpc/ps3: lv1 hcall code use symbolic constant for LR save offset
The LRSAVE constant is required for assembly compiled for both 32-bit and 64-bit, because the value differs there. PS3 is 64-bit only so this is a noop, but it is nice to abstract stack frame offsets. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231227072405.63751-3-npiggin@gmail.com |
||
|
Nicholas Piggin
|
6735fef14c |
powerpc/ps3: Fix lv1 hcall assembly for ELFv2 calling convention
Stack-passed parameters begin at a different offset in the caller's
stack in the ELFv2 ABI.
Reported-by: Geoff Levand <geoff@infradead.org>
Fixes:
|
||
|
Nicholas Piggin
|
6e9de2054e |
powerpc/pseries: Set CPU_FTR_DBELL according to ibm,pi-features
PAPR will define a new ibm,pi-features bit which says that doorbells should not be used even on architectures where they exist. This could be because they are emulated and slower than using the interrupt controller directly for IPIs. Wire this bit into the pi-features parser to clear CPU_FTR_DBELL, and ensure CPU_FTR_DBELL is not in CPU_FTRS_ALWAYS. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240207035220.339726-2-npiggin@gmail.com |
||
|
Nicholas Piggin
|
8b33806106 |
powerpc/pseries: Add a clear modifier to ibm,pa/pi-features parser
When a new ibm,pa/pi-features bit is introduced that is intended to
apply to existing systems and features, it may have an "inverted"
meaning (i.e., bit clear => feature available; bit set => unavailable).
Depending on the nature of the feature, this may give the best
backward compatibility result where old firmware will continue to
have that bit clear and therefore the feature available.
The 'invert' modifier presumably was introduced for this type of
feature bit. However it invert will set the feature if the bit is
clear, which prevents it being used in the situation where an old
CPU lacks a feature that a new CPU has, then a new firmware comes
out to disable that feature on the new CPU if the bit is set.
Adding an 'invert' entry for that feature would incorrectly enable
it for the old CPU.
So add a 'clear' modifier that clears the feature if the bit is set,
but it does not set the feature if the bit is clear. The feature
is expected to be set in the cpu table.
This replaces the 'invert' modifier, which is unused since commit
|
||
Madhavan Srinivasan
|
b22ea62722 |
powerpc/perf: Power11 Performance Monitoring support
Base enablement patch to register performance monitoring hardware support for Power11. Most of fields are copied from power10_pmu struct for power11_pmu struct. Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240221044623.1598642-2-mpe@ellerman.id.au |
||
|
Madhavan Srinivasan
|
c2ed087ed3 |
powerpc: Add Power11 architected and raw mode
Add CPU table entries for raw and architected mode. Most fields are copied from the Power10 table entries. CPU, MMU and user (ELF_HWCAP) features are unchanged vs P10. However userspace can detect P11 because the AT_PLATFORM value changes to "power11". The logical PVR value of 0x0F000007, passed to firmware via the ibm_arch_vec, indicates the kernel can support a P11 compatible CPU, which means at least ISA v3.1 compliant. Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240221044623.1598642-1-mpe@ellerman.id.au |
||
Shrikanth Hegde
|
8c328de8fd |
powerpc: Remove duplicate/unnecessary ifdefs
When an ifdef is used in the below manner, second one could be considered as duplicate. ifdef DEFINE_A ...code block... ifdef DEFINE_A <-- This is a duplicate. ...code block... endif else ifndef DEFINE_A <-- This is also duplicate. ...code block... endif endif More details about the script and methods used to find these code patterns are in cover letter of [1]. Few places in arch/powerpc where this pattern was seen: paca.h: Hunk1: Code is under check of CONFIG_PPC64 from line 13, hence the second CONFIG_PPC64 at line 166 is a duplicate. Hunk2: CONFIG_PPC_BOOK3S_64 was defined back to back. Merged the two ifdefs. asm-offsets.c: Code is under check of CONFIG_PPC64 from line 176 hence second CONFIG_PPC64 at line 249 is a duplicate. powermac/feature.c: #ifndef CONFIG_PPC64 is used at line 2066. And then in #else again #ifdef CONFIG_PPC64 is used. Which is a duplicate since in #else means CONFIG_PPC64 is defined. xmon.c: Code is under the check of CONFIG_SMP from line 521 hence the same check of CONFIG_SMP at line 646 is a duplicate. No functional change is intended here. It only aims to improve code readability. [1] https://lore.kernel.org/all/20240118080326.13137-1-sshegde@linux.ibm.com/ Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240216053016.528906-1-sshegde@linux.ibm.com |
||
Amit Machhiwal
|
20c8c4dafe |
KVM: PPC: Book3S HV: Fix L2 guest reboot failure due to empty 'arch_compat'
Currently, rebooting a pseries nested qemu-kvm guest (L2) results in
below error as L1 qemu sends PVR value 'arch_compat' == 0 via
ppc_set_compat ioctl. This triggers a condition failure in
kvmppc_set_arch_compat() resulting in an EINVAL.
qemu-system-ppc64: Unable to set CPU compatibility mode in KVM: Invalid
argument
Also, a value of 0 for arch_compat generally refers the default
compatibility of the host. But, arch_compat, being a Guest Wide Element
in nested API v2, cannot be set to 0 in GSB as PowerVM (L0) expects a
non-zero value. A value of 0 triggers a kernel trap during a reboot and
consequently causes it to fail:
[ 22.106360] reboot: Restarting system
KVM: unknown exit, hardware reason ffffffffffffffea
NIP 0000000000000100 LR 000000000000fe44 CTR 0000000000000000 XER 0000000020040092 CPU#0
MSR 0000000000001000 HID0 0000000000000000 HF 6c000000 iidx 3 didx 3
TB 00000000 00000000 DECR 0
GPR00 0000000000000000 0000000000000000 c000000002a8c300 000000007fe00000
GPR04 0000000000000000 0000000000000000 0000000000001002 8000000002803033
GPR08 000000000a000000 0000000000000000 0000000000000004 000000002fff0000
GPR12 0000000000000000 c000000002e10000 0000000105639200 0000000000000004
GPR16 0000000000000000 000000010563a090 0000000000000000 0000000000000000
GPR20 0000000105639e20 00000001056399c8 00007fffe54abab0 0000000105639288
GPR24 0000000000000000 0000000000000001 0000000000000001 0000000000000000
GPR28 0000000000000000 0000000000000000 c000000002b30840 0000000000000000
CR 00000000 [ - - - - - - - - ] RES 000@ffffffffffffffff
SRR0 0000000000000000 SRR1 0000000000000000 PVR 0000000000800200 VRSAVE 0000000000000000
SPRG0 0000000000000000 SPRG1 0000000000000000 SPRG2 0000000000000000 SPRG3 0000000000000000
SPRG4 0000000000000000 SPRG5 0000000000000000 SPRG6 0000000000000000 SPRG7 0000000000000000
HSRR0 0000000000000000 HSRR1 0000000000000000
CFAR 0000000000000000
LPCR 0000000000020400
PTCR 0000000000000000 DAR 0000000000000000 DSISR 0000000000000000
kernel:trap=0xffffffea | pc=0x100 | msr=0x1000
This patch updates kvmppc_set_arch_compat() to use the host PVR value if
'compat_pvr' == 0 indicating that qemu doesn't want to enforce any
specific PVR compat mode.
The relevant part of the code might need a rework if PowerVM implements
a support for `arch_compat == 0` in nestedv2 API.
Fixes:
|
||
Masahiro Yamada
|
97a5253d7c |
powerpc: remove unused KCSAN_SANITIZE_early_64.o in Makefile
Commit
|
||
Gaurav Batra
|
a5c57fd2e9 |
powerpc/pseries/iommu: DLPAR add doesn't completely initialize pci_controller
When a PCI device is dynamically added, the kernel oopses with a NULL pointer dereference: BUG: Kernel NULL pointer dereference on read at 0x00000030 Faulting instruction address: 0xc0000000006bbe5c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs xsk_diag bonding nft_compat nf_tables nfnetlink rfkill binfmt_misc dm_multipath rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c mlx5_core mlxfw sd_mod t10_pi sg tls ibmvscsi ibmveth scsi_transport_srp vmx_crypto pseries_wdt psample dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 17 PID: 2685 Comm: drmgr Not tainted 6.7.0-203405+ #66 Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries NIP: c0000000006bbe5c LR: c000000000a13e68 CTR: c0000000000579f8 REGS: c00000009924f240 TRAP: 0300 Not tainted (6.7.0-203405+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002220 XER: 20040006 CFAR: c000000000a13e64 DAR: 0000000000000030 DSISR: 40000000 IRQMASK: 0 ... NIP sysfs_add_link_to_group+0x34/0x94 LR iommu_device_link+0x5c/0x118 Call Trace: iommu_init_device+0x26c/0x318 (unreliable) iommu_device_link+0x5c/0x118 iommu_init_device+0xa8/0x318 iommu_probe_device+0xc0/0x134 iommu_bus_notifier+0x44/0x104 notifier_call_chain+0xb8/0x19c blocking_notifier_call_chain+0x64/0x98 bus_notify+0x50/0x7c device_add+0x640/0x918 pci_device_add+0x23c/0x298 of_create_pci_dev+0x400/0x884 of_scan_pci_dev+0x124/0x1b0 __of_scan_bus+0x78/0x18c pcibios_scan_phb+0x2a4/0x3b0 init_phb_dynamic+0xb8/0x110 dlpar_add_slot+0x170/0x3b8 [rpadlpar_io] add_slot_store.part.0+0xb4/0x130 [rpadlpar_io] kobj_attr_store+0x2c/0x48 sysfs_kf_write+0x64/0x78 kernfs_fop_write_iter+0x1b0/0x290 vfs_write+0x350/0x4a0 ksys_write+0x84/0x140 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec Commit |
||
|
Linus Torvalds
|
c02197fc90 |
powerpc fixes for 6.8 #3
- Fix ftrace bug on boot caused by exit text sections with -fpatchable-function-entry.
- Fix accuracy of stolen time on pseries since the switch to VIRT_CPU_ACCOUNTING_GEN.
- Fix a crash in the IOMMU code when doing DLPAR remove.
- Set pt_regs->link on scv entry to fix BPF stack unwinding.
- Add missing PPC_FEATURE_BOOKE on 64-bit e5500/e6500, which broke gdb.
- Fix boot on some 6xx platforms with STRICT_KERNEL_RWX enabled.
- Fix build failures with KASAN enabled and 32KB stack size.
- Some other minor fixes.
Thanks to: Arnd Bergmann, Benjamin Gray, Christophe Leroy, David Engraf, Gaurav
Batra, Jason Gunthorpe, Jiangfeng Xiao, Matthias Schiffer, Nathan Lynch, Naveen
N Rao, Nicholas Piggin, Nysal Jan K.A, R Nageswara Sastry, Shivaprasad G Bhat,
Shrikanth Hegde, Spoorthy, Srikar Dronamraju, Venkat Rao Bagalkote.
-----BEGIN PGP SIGNATURE-----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=TiJM
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"This is a bit of a big batch for rc4, but just due to holiday hangover
and because I didn't send any fixes last week due to a late revert
request. I think next week should be back to normal.
- Fix ftrace bug on boot caused by exit text sections with
'-fpatchable-function-entry'
- Fix accuracy of stolen time on pseries since the switch to
VIRT_CPU_ACCOUNTING_GEN
- Fix a crash in the IOMMU code when doing DLPAR remove
- Set pt_regs->link on scv entry to fix BPF stack unwinding
- Add missing PPC_FEATURE_BOOKE on 64-bit e5500/e6500, which broke
gdb
- Fix boot on some 6xx platforms with STRICT_KERNEL_RWX enabled
- Fix build failures with KASAN enabled and 32KB stack size
- Some other minor fixes
Thanks to Arnd Bergmann, Benjamin Gray, Christophe Leroy, David
Engraf, Gaurav Batra, Jason Gunthorpe, Jiangfeng Xiao, Matthias
Schiffer, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nysal Jan K.A,
R Nageswara Sastry, Shivaprasad G Bhat, Shrikanth Hegde, Spoorthy,
Srikar Dronamraju, and Venkat Rao Bagalkote"
* tag 'powerpc-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/iommu: Fix the missing iommu_group_put() during platform domain attach
powerpc/pseries: fix accuracy of stolen time
powerpc/ftrace: Ignore ftrace locations in exit text sections
powerpc/cputable: Add missing PPC_FEATURE_BOOKE on PPC64 Book-E
powerpc/kasan: Limit KASAN thread size increase to 32KB
Revert "powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add"
powerpc: 85xx: mark local functions static
powerpc: udbg_memcons: mark functions static
powerpc/kasan: Fix addr error caused by page alignment
powerpc/6xx: set High BAT Enable flag on G2_LE cores
selftests/powerpc/papr_vpd: Check devfd before get_system_loc_code()
powerpc/64: Set task pt_regs->link to the LR value on scv entry
powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add
powerpc/pseries/papr-sysparm: use u8 arrays for payloads
|
||
Ricardo B. Marliere
|
14ce0dbb56 |
powerpc: ibmebus: make ibmebus_bus_type const
Since commit
|
||
|
Ricardo B. Marliere
|
112202f34e |
powerpc: pmac: make macio_bus_type const
Since commit
|
||
|
Ricardo B. Marliere
|
8e3d0b8d99 |
powerpc: mpic: make mpic_subsys const
Since commit
|
||
|
Ricardo B. Marliere
|
565206aaa6 |
powerpc: vio: make vio_bus_type const
Since commit
|
||
|
Ricardo B. Marliere
|
e15d01277a |
powerpc: vio: move device attributes into a new ifdef
In order to make the distinction of the vio_bus_type variable based on CONFIG_PPC_SMLPAR more explicit, move the required structs into a new ifdef block. This is needed in order to make vio_bus_type const and because the distinction is made explicit, there is no need to set the fields within the vio_cmo_sysfs_init function. Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240212-bus_cleanup-powerpc2-v2-1-8441b3f77827@marliere.net |
||
|
Christophe Leroy
|
c5aebb53b3 |
powerpc: Force inlining of arch_vmap_p{u/m}d_supported()
arch_vmap_pud_supported() and arch_vmap_pmd_supported() are
expected to constant-fold to false when RADIX is not enabled.
Force inlining in order to avoid following failure which
leads to unexpected call of non-existing pud_set_huge() and
pmd_set_huge() on powerpc 8xx.
In function 'pud_huge_tests',
inlined from 'debug_vm_pgtable' at mm/debug_vm_pgtable.c:1399:2:
./arch/powerpc/include/asm/vmalloc.h:9:33: warning: inlining failed in call to 'arch_vmap_pud_supported.isra': call is unlikely and code size would grow [-Winline]
9 | #define arch_vmap_pud_supported arch_vmap_pud_supported
| ^~~~~~~~~~~~~~~~~~~~~~~
./arch/powerpc/include/asm/vmalloc.h:10:20: note: in expansion of macro 'arch_vmap_pud_supported'
10 | static inline bool arch_vmap_pud_supported(pgprot_t prot)
| ^~~~~~~~~~~~~~~~~~~~~~~
./arch/powerpc/include/asm/vmalloc.h:9:33: note: called from here
9 | #define arch_vmap_pud_supported arch_vmap_pud_supported
mm/debug_vm_pgtable.c:458:14: note: in expansion of macro 'arch_vmap_pud_supported'
458 | if (!arch_vmap_pud_supported(args->page_prot) ||
| ^~~~~~~~~~~~~~~~~~~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402131836.OU1TDuoi-lkp@intel.com/
Fixes:
|
||
|
Michael Ellerman
|
0875f1ceba |
powerpc/smp: Remap boot CPU onto core 0 if >= nr_cpu_ids
If nr_cpu_ids is too low to include the boot CPU, remap the boot CPU onto logical core 0. This is achieved in two stages. In early_init_dt_scan_cpus() the boot CPU is renumbered to be on logical core 0, and the original boot core's hardware ID is recorded. Later in smp_setup_cpu_maps(), if the original boot core ID is set, the logical CPU numbers on the 0th core are skipped in the normal device tree search over CPU device tree nodes. Then the search is continued until the device tree node matching the boot core is found, and those CPUs are assigned the CPU numbers starting at 0. This allows kdump kernels to be booted with low values for nr_cpu_ids to conserve memory, while also allowing the crashing/boot CPU to be any CPU. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Wen Xiong <wenxiong@us.ibm.com> Link: https://msgid.link/20231229120107.2281153-5-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
9832de6544 |
powerpc/smp: Factor out assign_threads()
Factor out the for loop that assigns CPU numbers to threads of a core. The function takes the next CPU number to use as input, and returns the next available CPU number after the threads has been assigned. This will allow a subsequent change to assign threads out of order. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231229120107.2281153-4-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
dca79603fb |
powerpc/smp: Lookup avail once per device tree node
The of_device_is_available() check only needs to be done once per device node, there's no need to repeat it for each thread. Move it out of the loop. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231229120107.2281153-3-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
777f81f0a9 |
powerpc/smp: Increase nr_cpu_ids to include the boot CPU
If nr_cpu_ids is too low to include the boot CPU adjust nr_cpu_ids upward. Otherwise the kernel will BUG when trying to allocate a paca for the boot CPU and fail to boot. Cc: stable@vger.kernel.org Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231229120107.2281153-2-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
5580e96dad |
powerpc/smp: Adjust nr_cpu_ids to cover all threads of a core
If nr_cpu_ids is too low to include at least all the threads of a single core adjust nr_cpu_ids upwards. This avoids triggering odd bugs in code that assumes all threads of a core are available. Cc: stable@vger.kernel.org Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231229120107.2281153-1-mpe@ellerman.id.au |
||
Shivaprasad G Bhat
|
0846dd77c8 |
powerpc/iommu: Fix the missing iommu_group_put() during platform domain attach
The function spapr_tce_platform_iommu_attach_dev() is missing to call
iommu_group_put() when the domain is already set. This refcount leak
shows up with BUG_ON() during DLPAR remove operation as:
KernelBug: Kernel bug in state 'None': kernel BUG at arch/powerpc/platforms/pseries/iommu.c:100!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=8192 NUMA pSeries
<snip>
Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_016) hv:phyp pSeries
NIP: c0000000000ff4d4 LR: c0000000000ff4cc CTR: 0000000000000000
REGS: c0000013aed5f840 TRAP: 0700 Tainted: G I (6.8.0-rc3-autotest-g99bd3cb0d12e)
MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 44002402 XER: 20040000
CFAR: c000000000a0d170 IRQMASK: 0
...
NIP iommu_reconfig_notifier+0x94/0x200
LR iommu_reconfig_notifier+0x8c/0x200
Call Trace:
iommu_reconfig_notifier+0x8c/0x200 (unreliable)
notifier_call_chain+0xb8/0x19c
blocking_notifier_call_chain+0x64/0x98
of_reconfig_notify+0x44/0xdc
of_detach_node+0x78/0xb0
ofdt_write.part.0+0x86c/0xbb8
proc_reg_write+0xf4/0x150
vfs_write+0xf8/0x488
ksys_write+0x84/0x140
system_call_exception+0x138/0x330
system_call_vectored_common+0x15c/0x2ec
The patch adds the missing iommu_group_put() call.
Fixes:
|
||
|
Shrikanth Hegde
|
cbecc9fcbb |
powerpc/pseries: fix accuracy of stolen time
powerVM hypervisor updates the VPA fields with stolen time data.
It currently reports enqueue_dispatch_tb and ready_enqueue_tb for
this purpose. In linux these two fields are used to report the stolen time.
The VPA fields are updated at the TB frequency. On powerPC its mostly
set at 512Mhz. Hence this needs a conversion to ns when reporting it
back as rest of the kernel timings are in ns. This conversion is already
handled in tb_to_ns function. So use that function to report accurate
stolen time.
Observed this issue and used an Capped Shared Processor LPAR(SPLPAR) to
simplify the experiments. In all these cases, 100% VP Load is run using
stress-ng workload. Values of stolen time is in percentages as reported
by mpstat. With the patch values are close to expected.
6.8.rc1 +Patch
12EC/12VP 0.0 0.0
12EC/24VP 25.7 50.2
12EC/36VP 37.3 69.2
12EC/48VP 38.5 78.3
Fixes:
|
||
Naveen N Rao
|
ea73179e64 |
powerpc/ftrace: Ignore ftrace locations in exit text sections
Michael reported that we are seeing an ftrace bug on bootup when KASAN
is enabled and we are using -fpatchable-function-entry:
ftrace: allocating 47780 entries in 18 pages
ftrace-powerpc: 0xc0000000020b3d5c: No module provided for non-kernel address
------------[ ftrace bug ]------------
ftrace faulted on modifying
[<c0000000020b3d5c>] 0xc0000000020b3d5c
Initializing ftrace call sites
ftrace record flags: 0
(0)
expected tramp: c00000000008cef4
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2180 ftrace_bug+0x3c0/0x424
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rc3-00120-g0f71dcfb4aef #860
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
NIP: c0000000003aa81c LR: c0000000003aa818 CTR: 0000000000000000
REGS: c0000000033cfab0 TRAP: 0700 Not tainted (6.5.0-rc3-00120-g0f71dcfb4aef)
MSR: 8000000002021033 <SF,VEC,ME,IR,DR,RI,LE> CR: 28028240 XER: 00000000
CFAR: c0000000002781a8 IRQMASK: 3
...
NIP [c0000000003aa81c] ftrace_bug+0x3c0/0x424
LR [c0000000003aa818] ftrace_bug+0x3bc/0x424
Call Trace:
ftrace_bug+0x3bc/0x424 (unreliable)
ftrace_process_locs+0x5f4/0x8a0
ftrace_init+0xc0/0x1d0
start_kernel+0x1d8/0x484
With CONFIG_FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY=y and
CONFIG_KASAN=y, compiler emits nops in functions that it generates for
registering and unregistering global variables (unlike with -pg and
-mprofile-kernel where calls to _mcount() are not generated in those
functions). Those functions then end up in INIT_TEXT and EXIT_TEXT
respectively. We don't expect to see any profiled functions in
EXIT_TEXT, so ftrace_init_nop() assumes that all addresses that aren't
in the core kernel text belongs to a module. Since these functions do
not match that criteria, we see the above bug.
Address this by having ftrace ignore all locations in the text exit
sections of vmlinux.
Fixes:
|
||
David Engraf
|
eb6d871f4b |
powerpc/cputable: Add missing PPC_FEATURE_BOOKE on PPC64 Book-E
Commit |
||
|
Michael Ellerman
|
f1acb10950 |
powerpc/kasan: Limit KASAN thread size increase to 32KB
KASAN is seen to increase stack usage, to the point that it was reported to lead to stack overflow on some 32-bit machines (see link). To avoid overflows the stack size was doubled for KASAN builds in commit |
||
|
Michael Ellerman
|
1fba2bf8e9 |
Revert "powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add"
This reverts commit
|
||
|
Linus Torvalds
|
4356e9f841 |
work around gcc bugs with 'asm goto' with outputs
We've had issues with gcc and 'asm goto' before, and we created a 'asm_volatile_goto()' macro for that in the past: see commits |
||
Randy Dunlap
|
7edd062339 |
drivers/ps3: select VIDEO to provide cmdline functions
When VIDEO is not set, there is a build error. Fix that by selecting VIDEO for PS3_PS3AV. ERROR: modpost: ".video_get_options" [drivers/ps3/ps3av_mod.ko] undefined! Fixes: |
||
|
Paolo Bonzini
|
687d8f4c3d |
Merge branch 'kvm-kconfig'
Cleanups to Kconfig definitions for KVM * replace HAVE_KVM with an architecture-dependent symbol, when CONFIG_KVM may or may not be available depending on CPU capabilities (MIPS) * replace HAVE_KVM with IS_ENABLED(CONFIG_KVM) for host-side code that is not part of the KVM module, so that it is completely compiled out * factor common "select" statements in common code instead of requiring each architecture to specify it |
||
|
Paolo Bonzini
|
61df71ee99 |
kvm: move "select IRQ_BYPASS_MANAGER" to common code
CONFIG_IRQ_BYPASS_MANAGER is a dependency of the common code included by CONFIG_HAVE_KVM_IRQ_BYPASS. There is no advantage in adding the corresponding "select" directive to each architecture. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
6bda055d62 |
KVM: define __KVM_HAVE_GUEST_DEBUG unconditionally
Since all architectures (for historical reasons) have to define struct kvm_guest_debug_arch, and since userspace has to check KVM_CHECK_EXTENSION(KVM_CAP_SET_GUEST_DEBUG) anyway, there is no advantage in masking the capability #define itself. Remove the #define __KVM_HAVE_GUEST_DEBUG from architecture-specific headers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
d750951c9e |
KVM: powerpc: move powerpc-specific structs to uapi/asm/kvm.h
While this in principle breaks the appearance of KVM_PPC_* ioctls on architectures other than powerpc, this seems unlikely to be a problem considering that there are already many "struct kvm_ppc_*" definitions in arch/powerpc/include/uapi. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
Kees Cook
|
918327e9b7 |
ubsan: Remove CONFIG_UBSAN_SANITIZE_ALL
For simplicity in splitting out UBSan options into separate rules, remove CONFIG_UBSAN_SANITIZE_ALL, effectively defaulting to "y", which is how it is generally used anyway. (There are no ":= y" cases beyond where a specific file is enabled when a top-level ":= n" is in effect.) Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Marco Elver <elver@google.com> Cc: linux-doc@vger.kernel.org Cc: linux-kbuild@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> |
||
|
Arnd Bergmann
|
1c57b9f63a |
powerpc: 85xx: mark local functions static
These functions are either used in only one file and can just be made static or need an #include statement to avoid a warning: arch/powerpc/platforms/85xx/mpc8536_ds.c:30:13: error: no previous prototype for 'mpc8536_ds_pic_init' [-Werror=missing-prototypes] arch/powerpc/platforms/85xx/p1010rdb.c:27:13: error: no previous prototype for 'p1010_rdb_pic_init' [-Werror=missing-prototypes] arch/powerpc/platforms/85xx/p1022_ds.c:373:6: error: no previous prototype for 'p1022ds_set_pixel_clock' [-Werror=missing-prototypes] arch/powerpc/platforms/85xx/p1022_ds.c:422:1: error: no previous prototype for 'p1022ds_valid_monitor_port' [-Werror=missing-prototypes] arch/powerpc/platforms/85xx/p1022_ds.c:435:13: error: no previous prototype for 'p1022_ds_pic_init' [-Werror=missing-prototypes] arch/powerpc/platforms/85xx/p1022_rdk.c:43:6: error: no previous prototype for 'p1022rdk_set_pixel_clock' [-Werror=missing-prototypes] arch/powerpc/platforms/85xx/p1022_rdk.c:92:1: error: no previous prototype for 'p1022rdk_valid_monitor_port' [-Werror=missing-prototypes] arch/powerpc/platforms/85xx/p1022_rdk.c:99:13: error: no previous prototype for 'p1022_rdk_pic_init' [-Werror=missing-prototypes] arch/powerpc/platforms/85xx/socrates_fpga_pic.c:273:13: error: no previous prototype for 'socrates_fpga_pic_init' [-Werror=missing-prototypes] arch/powerpc/platforms/85xx/xes_mpc85xx.c:40:13: error: no previous prototype for 'xes_mpc85xx_pic_init' [-Werror=missing-prototypes] arch/powerpc/platforms/85xx/mvme2500.c:24:13: error: no previous prototype for 'mvme2500_pic_init' [-Werror=missing-prototypes] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240123125148.2004648-2-arnd@kernel.org |
||
|
Arnd Bergmann
|
5c84bc8b61 |
powerpc: udbg_memcons: mark functions static
ppc64_book3e_allmodconfig has one more driver that triggeres a few missing-prototypes warnings: arch/powerpc/sysdev/udbg_memcons.c:44:6: error: no previous prototype for 'memcons_putc' [-Werror=missing-prototypes] arch/powerpc/sysdev/udbg_memcons.c:57:5: error: no previous prototype for 'memcons_getc_poll' [-Werror=missing-prototypes] arch/powerpc/sysdev/udbg_memcons.c:80:5: error: no previous prototype for 'memcons_getc' [-Werror=missing-prototypes] Mark all these function static as there are no other users. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240123125148.2004648-1-arnd@kernel.org |
||
Jiangfeng Xiao
|
4a7aee9620 |
powerpc/kasan: Fix addr error caused by page alignment
In kasan_init_region, when k_start is not page aligned, at the begin of
for loop, k_cur = k_start & PAGE_MASK is less than k_start, and then
`va = block + k_cur - k_start` is less than block, the addr va is invalid,
because the memory address space from va to block is not alloced by
memblock_alloc, which will not be reserved by memblock_reserve later, it
will be used by other places.
As a result, memory overwriting occurs.
for example:
int __init __weak kasan_init_region(void *start, size_t size)
{
[...]
/* if say block(dcd97000) k_start(feef7400) k_end(feeff3fe) */
block = memblock_alloc(k_end - k_start, PAGE_SIZE);
[...]
for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) {
/* at the begin of for loop
* block(dcd97000) va(dcd96c00) k_cur(feef7000) k_start(feef7400)
* va(dcd96c00) is less than block(dcd97000), va is invalid
*/
void *va = block + k_cur - k_start;
[...]
}
[...]
}
Therefore, page alignment is performed on k_start before
memblock_alloc() to ensure the validity of the VA address.
Fixes:
|
||
Matthias Schiffer
|
a038a3ff8c |
powerpc/6xx: set High BAT Enable flag on G2_LE cores
MMU_FTR_USE_HIGH_BATS is set for G2_LE cores and derivatives like e300cX,
but the high BATs need to be enabled in HID2 to work. Add register
definitions and add the needed setup to __setup_cpu_603.
This fixes boot on CPUs like the MPC5200B with STRICT_KERNEL_RWX enabled
on systems where the flag has not been set by the bootloader already.
Fixes:
|
||
|
Naveen N Rao
|
aad98efd0b |
powerpc/64: Set task pt_regs->link to the LR value on scv entry
Nysal reported that userspace backtraces are missing in offcputime bcc
tool. As an example:
$ sudo ./bcc/tools/offcputime.py -uU
Tracing off-CPU time (us) of user threads by user stack... Hit Ctrl-C to end.
^C
write
- python (9107)
8
write
- sudo (9105)
9
mmap
- python (9107)
16
clock_nanosleep
- multipathd (697)
3001604
The offcputime bcc tool attaches a bpf program to a kprobe on
finish_task_switch(), which is usually hit on a syscall from userspace.
With the switch to system call vectored, we started setting
pt_regs->link to zero. This is because system call vectored behaves like
a function call with LR pointing to the system call return address, and
with no modification to SRR0/SRR1. The LR value does indicate our next
instruction, so it is being saved as pt_regs->nip, and pt_regs->link is
being set to zero. This is not a problem by itself, but BPF uses perf
callchain infrastructure for capturing stack traces, and that stores LR
as the second entry in the stack trace. perf has code to cope with the
second entry being zero, and skips over it. However, generic userspace
unwinders assume that a zero entry indicates end of the stack trace,
resulting in a truncated userspace stack trace.
Rather than fixing all userspace unwinders to ignore/skip past the
second entry, store the real LR value in pt_regs->link so that there
continues to be a valid, though duplicate entry in the stack trace.
With this change:
$ sudo ./bcc/tools/offcputime.py -uU
Tracing off-CPU time (us) of user threads by user stack... Hit Ctrl-C to end.
^C
write
write
[unknown]
[unknown]
[unknown]
[unknown]
[unknown]
PyObject_VectorcallMethod
[unknown]
[unknown]
PyObject_CallOneArg
PyFile_WriteObject
PyFile_WriteString
[unknown]
[unknown]
PyObject_Vectorcall
_PyEval_EvalFrameDefault
PyEval_EvalCode
[unknown]
[unknown]
[unknown]
_PyRun_SimpleFileObject
_PyRun_AnyFileObject
Py_RunMain
[unknown]
Py_BytesMain
[unknown]
__libc_start_main
- python (1293)
7
write
write
[unknown]
sudo_ev_loop_v1
sudo_ev_dispatch_v1
[unknown]
[unknown]
[unknown]
[unknown]
__libc_start_main
- sudo (1291)
7
syscall
syscall
bpf_open_perf_buffer_opts
[unknown]
[unknown]
[unknown]
[unknown]
_PyObject_MakeTpCall
PyObject_Vectorcall
_PyEval_EvalFrameDefault
PyEval_EvalCode
[unknown]
[unknown]
[unknown]
_PyRun_SimpleFileObject
_PyRun_AnyFileObject
Py_RunMain
[unknown]
Py_BytesMain
[unknown]
__libc_start_main
- python (1293)
11
clock_nanosleep
clock_nanosleep
nanosleep
sleep
[unknown]
[unknown]
__clone
- multipathd (698)
3001661
Fixes:
|
||
|
Gaurav Batra
|
ed8b94f6e0 |
powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add
When a PCI device is dynamically added, the kernel oopses with a NULL pointer dereference: BUG: Kernel NULL pointer dereference on read at 0x00000030 Faulting instruction address: 0xc0000000006bbe5c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs xsk_diag bonding nft_compat nf_tables nfnetlink rfkill binfmt_misc dm_multipath rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c mlx5_core mlxfw sd_mod t10_pi sg tls ibmvscsi ibmveth scsi_transport_srp vmx_crypto pseries_wdt psample dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 17 PID: 2685 Comm: drmgr Not tainted 6.7.0-203405+ #66 Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries NIP: c0000000006bbe5c LR: c000000000a13e68 CTR: c0000000000579f8 REGS: c00000009924f240 TRAP: 0300 Not tainted (6.7.0-203405+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002220 XER: 20040006 CFAR: c000000000a13e64 DAR: 0000000000000030 DSISR: 40000000 IRQMASK: 0 ... NIP sysfs_add_link_to_group+0x34/0x94 LR iommu_device_link+0x5c/0x118 Call Trace: iommu_init_device+0x26c/0x318 (unreliable) iommu_device_link+0x5c/0x118 iommu_init_device+0xa8/0x318 iommu_probe_device+0xc0/0x134 iommu_bus_notifier+0x44/0x104 notifier_call_chain+0xb8/0x19c blocking_notifier_call_chain+0x64/0x98 bus_notify+0x50/0x7c device_add+0x640/0x918 pci_device_add+0x23c/0x298 of_create_pci_dev+0x400/0x884 of_scan_pci_dev+0x124/0x1b0 __of_scan_bus+0x78/0x18c pcibios_scan_phb+0x2a4/0x3b0 init_phb_dynamic+0xb8/0x110 dlpar_add_slot+0x170/0x3b8 [rpadlpar_io] add_slot_store.part.0+0xb4/0x130 [rpadlpar_io] kobj_attr_store+0x2c/0x48 sysfs_kf_write+0x64/0x78 kernfs_fop_write_iter+0x1b0/0x290 vfs_write+0x350/0x4a0 ksys_write+0x84/0x140 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec Commit |
||
|
Nathan Lynch
|
8ded03ae48 |
powerpc/pseries/papr-sysparm: use u8 arrays for payloads
Some PAPR system parameter values are formatted by firmware as
nul-terminated strings (e.g. LPAR name, shared processor attributes).
But the values returned for other parameters, such as processor module
info and TLB block invalidate characteristics, are binary data with
parameter-specific layouts. So char[] isn't the appropriate type for
the general case. Use u8/__u8.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes:
|
||
|
Christophe Leroy
|
79d9f965ec |
powerpc: Simplify strict_kernel_rwx_enabled()
Now that rodata_enabled is always declared, remove #ifdef and define a single version of strict_kernel_rwx_enabled(). Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Shivaprasad G Bhat
|
d2d00e1580 |
powerpc: iommu: Bring back table group release_ownership() call
The commit |
||
Tanzir Hasan
|
66a5c40f60 |
kernel.h: removed REPEAT_BYTE from kernel.h
This patch creates wordpart.h and includes it in asm/word-at-a-time.h for all architectures. WORD_AT_A_TIME_CONSTANTS depends on kernel.h because of REPEAT_BYTE. Moving this to another header and including it where necessary allows us to not include the bloated kernel.h. Making this implicit dependency on REPEAT_BYTE explicit allows for later improvements in the lib/string.c inclusion list. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Tanzir Hasan <tanzirh@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20231226-libstringheader-v6-1-80aa08c7652c@google.com Signed-off-by: Kees Cook <keescook@chromium.org> |
||
Danny Tsen
|
109303336a |
crypto: vmx - Move to arch/powerpc/crypto
Relocate all crypto files in vmx driver to arch/powerpc/crypto directory and remove vmx directory. drivers/crypto/vmx/aes.c rename to arch/powerpc/crypto/aes.c drivers/crypto/vmx/aes_cbc.c rename to arch/powerpc/crypto/aes_cbc.c drivers/crypto/vmx/aes_ctr.c rename to arch/powerpc/crypto/aes_ctr.c drivers/crypto/vmx/aes_xts.c rename to arch/powerpc/crypto/aes_xts.c drivers/crypto/vmx/aesp8-ppc.h rename to arch/powerpc/crypto/aesp8-ppc.h drivers/crypto/vmx/aesp8-ppc.pl rename to arch/powerpc/crypto/aesp8-ppc.pl drivers/crypto/vmx/ghash.c rename to arch/powerpc/crypto/ghash.c drivers/crypto/vmx/ghashp8-ppc.pl rename to arch/powerpc/crypto/ghashp8-ppc.pl drivers/crypto/vmx/vmx.c rename to arch/powerpc/crypto/vmx.c deleted files: drivers/crypto/vmx/Makefile drivers/crypto/vmx/Kconfig drivers/crypto/vmx/ppc-xlate.pl This patch has been tested has passed the selftest. The patch is also tested with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled. Signed-off-by: Danny Tsen <dtsen@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Linus Torvalds
|
7b297a5cc9 |
powerpc fixes for 6.8 #2
-
|
||
|
Linus Torvalds
|
bd736f38c0 |
TTY/Serial changes for 6.8-rc1
Here is the big set of tty and serial driver changes for 6.8-rc1. As usual, Jiri has a bunch of refactoring and cleanups for the tty core and drivers in here, along with the usual set of rs485 updates (someday this might work properly...) Along with those, in here are changes for: - sc16is7xx serial driver updates - platform driver removal api updates - amba-pl011 driver updates - tty driver binding updates - other small tty/serial driver updates and changes All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeUaw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykyOgCgp1uhP/b9iW6qM7qL6OYEG6idI0kAnj0VASNm vSI69HmdKKwo69YLOSBp =14n1 -----END PGP SIGNATURE----- Merge tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.8-rc1. As usual, Jiri has a bunch of refactoring and cleanups for the tty core and drivers in here, along with the usual set of rs485 updates (someday this might work properly...) Along with those, in here are changes for: - sc16is7xx serial driver updates - platform driver removal api updates - amba-pl011 driver updates - tty driver binding updates - other small tty/serial driver updates and changes All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits) serial: sc16is7xx: refactor EFR lock serial: sc16is7xx: reorder code to remove prototype declarations serial: sc16is7xx: refactor FIFO access functions to increase commonality serial: sc16is7xx: drop unneeded MODULE_ALIAS serial: sc16is7xx: replace hardcoded divisor value with BIT() macro serial: sc16is7xx: add explicit return for some switch default cases serial: sc16is7xx: add macro for max number of UART ports serial: sc16is7xx: add driver name to struct uart_driver serial: sc16is7xx: use i2c_get_match_data() serial: sc16is7xx: use spi_get_device_match_data() serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield serial: sc16is7xx: improve do/while loop in sc16is7xx_irq() serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq() serial: sc16is7xx: set safe default SPI clock frequency serial: sc16is7xx: add check for unsupported SPI modes during probe serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error serial: 8250_exar: Set missing rs485_supported flag serial: omap: do not override settings for RS485 support serial: core, imx: do not set RS485 enabled if it is not supported serial: core: make sure RS485 cannot be enabled when it is not supported ... |
||
|
Michael Ellerman
|
18f14afe28 |
powerpc/64s: Increase default stack size to 32KB
There are reports of kernels crashing due to stack overflow while running OpenShift (Kubernetes). The primary contributor to the stack usage seems to be openvswitch, which is used by OVN-Kubernetes (based on OVN (Open Virtual Network)), but NFS also contributes in some stack traces. There may be some opportunities to reduce stack usage in the openvswitch code, but doing so potentially require tradeoffs vs performance, and also requires testing across architectures. Looking at stack usage across the kernel (using -fstack-usage), shows that ppc64le stack frames are on average 50-100% larger than the equivalent function built for x86-64. Which is not surprising given the minimum stack frame size is 32 bytes on ppc64le vs 16 bytes on x86-64. So increase the default stack size to 32KB for the modern 64-bit Book3S platforms, ie. pseries (virtualised) and powernv (bare metal). That leaves the older systems like G5s, and the AmigaOne (pasemi) with a 16KB stack which should be sufficient on those machines. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org> Link: https://msgid.link/20231215124449.317597-1-mpe@ellerman.id.au |
||
|
Linus Torvalds
|
e1aa9df440 |
pci-v6.8-changes
-----BEGIN PGP SIGNATURE-----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=ri0M
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Reserve ECAM so we don't assign it to PCI BARs; this works around
bugs where BIOS included ECAM in a PNP0A03 host bridge window,
didn't reserve it via a PNP0C02 motherboard device, and didn't
allocate space for SR-IOV VF BARs (Bjorn Helgaas)
- Add MMCONFIG/ECAM debug logging (Bjorn Helgaas)
- Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas)
- Log device type (Root Port, Switch Port, etc) during enumeration
(Bjorn Helgaas)
- Log bridges before downstream devices so the dmesg order is more
logical (Bjorn Helgaas)
- Log resource names (BAR 0, VF BAR 0, bridge window, etc)
consistently instead of a mix of names and "reg 0x10" (Puranjay
Mohan, Bjorn Helgaas)
- Fix 64GT/s effective data rate calculation to use 1b/1b encoding
rather than the 8b/10b or 128b/130b used by lower rates (Ilpo
Järvinen)
- Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI
lpfc (Ilpo Järvinen)
- Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen)
Resource management:
- Restructure pci_dev_for_each_resource() to avoid computing the
address of an out-of-bounds array element (the bounds check was
performed later so the element was never actually *read*, but it's
nicer to avoid even computing an out-of-bounds address) (Andy
Shevchenko)
Driver binding:
- Convert pci-host-common.c platform .remove() callback to
.remove_new() returning 'void' since it's not useful to return
error codes here (Uwe Kleine-König)
- Convert exynos, keystone, kirin from .remove() to .remove_new(),
which returns void instead of int (Uwe Kleine-König)
- Drop unused struct pci_driver.node member (Mathias Krause)
Virtualization:
- Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc)
Error handling:
- Log AER errors as "Correctable" (not "Corrected") or
"Uncorrectable" to match spec terminology (Bjorn Helgaas)
- Decode Requester ID when no error info found instead of printing
the raw hex value (Bjorn Helgaas)
Endpoint framework:
- Use a unique test pattern for each BAR in the pci_endpoint_test to
make it easier to debug address translation issues (Niklas Cassel)
Broadcom STB PCIe controller driver:
- Add DT property "brcm,clkreq-mode" and driver support for different
CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan)
Freescale Layerscape PCIe controller driver:
- Add suspend/resume support for Layerscape LS1043a and LS1021a,
including software-managed PME_Turn_Off and transitions between L0,
L2/L3_Ready Link states (Frank Li)
MediaTek PCIe controller driver:
- Clear MSI interrupt status before handler to avoid missing MSIs
that occur after the handler (qizhong cheng)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 translation window setup to handle MMIO space
that is not a power of two in size (Jianjun Wang)
Qualcomm PCIe controller driver:
- Increase qcom iommu-map maxItems to accommodate SDX55 (five
entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski)
- Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof
Kozlowski)
- Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof
Kozlowski)
- Correct the qcom "reset-name" property, previously incorrectly
called "reset-names" (Krzysztof Kozlowski)
- Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil
Armstrong)
Renesas R-Car PCIe controller driver:
- Replace of_device.h with explicit of.h include to untangle header
usage (Rob Herring)
- Add DT and driver support for optional miniPCIe 1.5v and 3.3v
regulators on KingFisher (Wolfram Sang)
SiFive FU740 PCIe controller driver:
- Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to
ARCH_SIFIVE (Conor Dooley)
Synopsys DesignWare PCIe controller driver:
- Align iATU mapping for endpoint MSI-X (Niklas Cassel)
- Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro
Shimoda)
- Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro
Shimoda)
- Rename struct dw_pcie_ep_ops.func_conf_select() to
.get_dbi_offset() to be more descriptive (Yoshihiro Shimoda)
- Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro
Shimoda)
TI J721E PCIe driver:
- Add j721e DT and driver support for 'num-lanes' for devices that
support x1, x2, or x4 Links (Matt Ranostay)
- Add j721e DT compatible strings and driver support for j784s4 (Matt
Ranostay)
- Make TI J721E Kconfig depend on ARCH_K3 since the hardware is
specific to those TI SoC parts (Peter Robinson)
TI Keystone PCIe controller driver:
- Hold power management references to all PHYs while enabling them to
avoid a race when one provides clocks to others (Siddharth
Vadapalli)
Xilinx XDMA PCIe controller driver:
- Remove redundant dev_err(), since platform_get_irq() and
platform_get_irq_byname() already log errors (Yang Li)
- Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
(Krzysztof Wilczyński)
- Fix xilinx_pl_dma_pcie_init_irq_domain() error return when
irq_domain_add_linear() fails (Harshit Mogalapalli)
MicroSemi Switchtec management driver:
- Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm
ioremapping in switchtec_pci_probe(). Previously the cleanup was
done in stdev_release(), which used stale pointers if stdev->cdev
happened to be open when the PCI device was removed (Daniel
Stodden)
Miscellaneous:
- Convert interrupt terminology from "legacy" to "INTx" to be more
specific and match spec terminology (Damien Le Moal)
- In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of
deprecated ida_simple_*() API with ida_alloc() and ida_free()
(Christophe JAILLET)"
* tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Fix kernel-doc issues
PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device
dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode"
PCI: mediatek-gen3: Fix translation window size calculation
PCI: mediatek: Clear interrupt status before dispatching handler
PCI: keystone: Fix race condition when initializing PHYs
PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain()
PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error
PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning
PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers
PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops
PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops
PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members
misc: pci_endpoint_test: Use a unique test pattern for each BAR
PCI: j721e: Make TI J721E depend on ARCH_K3
PCI: j721e: Add TI J784S4 PCIe configuration
PCI/AER: Use explicit register sizes for struct members
PCI/AER: Decode Requester ID when no error info found
PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors
...
|
||
|
Linus Torvalds
|
09d1c6a80f |
Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
switch a memory area between guest_memfd and regular anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that guarantees
confidentiality (AMD PSP, Intel TDX module, or EL2 in the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new guest_memfd
and page attributes infrastructure. This is mostly useful for testing,
since there is no pKVM-like infrastructure to provide a meaningfully
reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages during
CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf
TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually care
about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a stable TSC",
because some of them don't expect the "TSC stable" bit (added to the pvclock
ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM always
flushes on nested transitions, i.e. always satisfies flush requests. This
allows running bleeding edge versions of VMware Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV support.
- On AMD machines with vNMI, always rely on hardware instead of intercepting
IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters and other state
prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events using a
dedicated field instead of snapshotting the "previous" counter. If the
hardware PMC count triggers overflow that is recognized in the same VM-Exit
that KVM manually bumps an event count, KVM would pend PMIs for both the
hardware-triggered overflow and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be problematic for
subsystems that require no regressions for W=1 builds.
- Advertise all of the host-supported CPUID bits that enumerate IA32_SPEC_CTRL
"features".
- Don't force a masterclock update when a vCPU synchronizes to the current TSC
generation, as updating the masterclock can cause kvmclock's time to "jump"
unexpectedly, e.g. when userspace hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter fault paths,
partly as a super minor optimization, but mostly to make KVM play nice with
position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing flag
in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix the
various bugs that were lurking due to lack of said annotation.
There are two non-KVM patches buried in the middle of guest_memfd support:
fs: Rename anon_inode_getfile_secure() and anon_inode_getfd_secure()
mm: Add AS_UNMOVABLE to mark mapping as completely unmovable
The first is small and mostly suggested-by Christian Brauner; the second
a bit less so but it was written by an mm person (Vlastimil Babka).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWcMWkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO15gf/WLmmg3SET6Uzw9iEq2xo28831ZA+
6kpILfIDGKozV5safDmMvcInlc/PTnqOFrsKyyN4kDZ+rIJiafJdg/loE0kPXBML
wdR+2ix5kYI1FucCDaGTahskBDz8Lb/xTpwGg9BFLYFNmuUeHc74o6GoNvr1uliE
4kLZL2K6w0cSMPybUD+HqGaET80ZqPwecv+s1JL+Ia0kYZJONJifoHnvOUJ7DpEi
rgudVdgzt3EPjG0y1z6MjvDBXTCOLDjXajErlYuZD3Ej8N8s59Dh2TxOiDNTLdP4
a4zjRvDmgyr6H6sz+upvwc7f4M4p+DBvf+TkWF54mbeObHUYliStqURIoA==
=66Ws
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
|
||
|
Linus Torvalds
|
499aa1ca4e |
dcache stuff for this cycle
change of locking rules for __dentry_kill(), regularized refcounting
rules in that area, assorted cleanups and removal of weird corner
cases (e.g. now ->d_iput() on child is always called before the parent
might hit __dentry_kill(), etc.)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZZ+sQQAKCRBZ7Krx/gZQ
6ybjAQDM5jiS93IUzfHjCWq0nVBX5YGbDAkZOeqxbmIdQb+2UAEA6elP5r0fBBcA
seo3bry4DirQMDaA/Cjh4+8r71YSOQs=
=7+Hk
-----END PGP SIGNATURE-----
Merge tag 'pull-dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull dcache updates from Al Viro:
"Change of locking rules for __dentry_kill(), regularized refcounting
rules in that area, assorted cleanups and removal of weird corner
cases (e.g. now ->d_iput() on child is always called before the parent
might hit __dentry_kill(), etc)"
* tag 'pull-dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
dcache: remove unnecessary NULL check in dget_dlock()
kill DCACHE_MAY_FREE
__d_unalias() doesn't use inode argument
d_alloc_parallel(): in-lookup hash insertion doesn't need an RCU variant
get rid of DCACHE_GENOCIDE
d_genocide(): move the extern into fs/internal.h
simple_fill_super(): don't bother with d_genocide() on failure
nsfs: use d_make_root()
d_alloc_pseudo(): move setting ->d_op there from the (sole) caller
kill d_instantate_anon(), fold __d_instantiate_anon() into remaining caller
retain_dentry(): introduce a trimmed-down lockless variant
__dentry_kill(): new locking scheme
d_prune_aliases(): use a shrink list
switch select_collect{,2}() to use of to_shrink_list()
to_shrink_list(): call only if refcount is 0
fold dentry_kill() into dput()
don't try to cut corners in shrink_lock_dentry()
fold the call of retain_dentry() into fast_dput()
Call retain_dentry() with refcount 0
dentry_kill(): don't bother with retain_dentry() on slow path
...
|
||
|
Linus Torvalds
|
3e7aeb78ab |
Networking changes for 6.8.
Core & protocols
----------------
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up
build time warnings to safeguard against future header changes.
This improves TCP performances with many concurrent connections
up to 40%.
- Add page-pool netlink-based introspection, exposing the
memory usage and recycling stats. This helps indentify
bad PP users and possible leaks.
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set.
This lowers the time taken by connect() for hosts having
many active connections to the same destination.
- Refactor the TCP bind conflict code, shrinking related socket
structs.
- Refactor TCP SYN-Cookie handling, as a preparation step to
allow arbitrary SYN-Cookie processing via eBPF.
- Tune optmem_max for 0-copy usage, increasing the default value
to 128KB and namespecifying it.
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations.
- Reduce extension header parsing overhead at GRO time.
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries.
- Reorder nftables struct members, to keep data accessed by the
datapath first.
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer.
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex).
- More data-race annotations.
- Extend the diag interface to dump TCP bound-only sockets.
- Conditional notification of events for TC qdisc class and actions.
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID.
- Implement SMCv2.1 virtual ISM device support.
- Add support for Batman-avd mulicast packet type.
BPF
---
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers. It
improves the verifier "instructions processed" metric from single
digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload.
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y.
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques.
- Support uid/gid options when mounting bpffs.
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is identified
by its id.
- Extend verifier to allow bpf_refcount_acquire() of a map value field
obtained via direct load which is a use-case needed in sched_ext.
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter.
- Support for VLAN tag in XDP hints.
- Remove deprecated bpfilter kernel leftovers given the project
is developed in user-space (https://github.com/facebook/bpfilter).
Misc
----
- Support for parellel TC self-tests execution.
- Increase MPTCP self-tests coverage.
- Updated the bridge documentation, including several so-far
undocumented features.
- Convert all the net self-tests to run in unique netns, to
avoid random failures due to conflict and allow concurrent
runs.
- Add TCP-AO self-tests.
- Add kunit tests for both cfg80211 and mac80211.
- Autogenerate Netlink families documentation from YAML spec.
- Add yml-gen support for fixed headers and recursive nests, the
tool can now generate user-space code for all genetlink families
for which we have specs.
- A bunch of additional module descriptions fixes.
- Catch incorrect freeing of pages belonging to a page pool.
Driver API
----------
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust.
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship.
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances.
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host.
- Add support for ethtool symmetric-xor RSS hash.
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform.
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute.
- Convert older drivers to platform remove callback returning void.
- Add support for PHY package MMD read/write.
New hardware / drivers
----------------------
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed
-------
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Drivers
-------
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will allow
in future releases combining multiple PFs devices attached to
different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring param,
coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=1bW6
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.
Core & protocols:
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes
This improves TCP performances with many concurrent connections up
to 40%
- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination
- Refactor the TCP bind conflict code, shrinking related socket
structs
- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF
- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations
- Reduce extension header parsing overhead at GRO time
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries
- Reorder nftables struct members, to keep data accessed by the
datapath first
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)
- More data-race annotations
- Extend the diag interface to dump TCP bound-only sockets
- Conditional notification of events for TC qdisc class and actions
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID
- Implement SMCv2.1 virtual ISM device support
- Add support for Batman-avd mulicast packet type
BPF:
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques
- Support uid/gid options when mounting bpffs
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id
- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter
- Support for VLAN tag in XDP hints
- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)
Misc:
- Support for parellel TC self-tests execution
- Increase MPTCP self-tests coverage
- Updated the bridge documentation, including several so-far
undocumented features
- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs
- Add TCP-AO self-tests
- Add kunit tests for both cfg80211 and mac80211
- Autogenerate Netlink families documentation from YAML spec
- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs
- A bunch of additional module descriptions fixes
- Catch incorrect freeing of pages belonging to a page pool
Driver API:
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host
- Add support for ethtool symmetric-xor RSS hash
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute
- Convert older drivers to platform remove callback returning void
- Add support for PHY package MMD read/write
New hardware / drivers:
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed:
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Driver updates:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"
* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...
|
||
|
Linus Torvalds
|
c299010061 |
asm-generic cleanups for 6.8
A series from Baoquan He cleans up the asm-generic/io.h to remove the ioremap_uc() definition from everything except x86, which still needs it for pre-PAT systems. This series notably contains a patch from Jiaxun Yang that converts MIPS to use asm-generic/io.h like every other architecture does, enabling future cleanups. Some of my own patches fix -Wmissing-prototype warnings in architecture specific code across several architectures. This is now needed as the warning is enabled by default. There are still some remaining warnings in minor platforms, but the series should catch most of the widely used ones make them more consistent with one another. David McKay fixes a bug in __generic_cmpxchg_local() when this is used on 64-bit architectures. This could currently only affect parisc64 and sparc64. Additional cleanups address from Linus Walleij, Uwe Kleine-König, Thomas Huth, and Kefeng Wang help reduce unnecessary inconsistencies between architectures. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmWeak8ACgkQYKtH/8kJ UidSiQ/+LL1WTO9d3Zx5HI0GGGjaIYpYs6jUNSf9Y5GPQiOrvjfEWj7CU11/4vxl GlQRpRyncYm8Eiz0Qu+aNxZFiiMah8Uful75yfbX8P1L4EPTbAYNDjkyNJrTjIAK jPK4sl8awIrapOeFUz++PsEj22R/4Is4f0mo+CqoCkL5RKlHe5oFdXzcwjmds4yK CvU6Ldn+M7FZ3EItMdjXaB3D3HS9uictFiO5JByZY8p+IcqgNRI/iHNnZIMsltJ+ XjDi0DG+x4jCj6teElSchw7AofE4OcNSP3xbR1PLKv6+xBLGYaAGZhNuPTz88eV/ Gj0loDQrrR5McGUfDBRHK9zN2Jd0O/FKnfh9kLOt1FLFyGPvC78Q/2HkpVCjbBr2 Pr1aqhLDHA+tGNSsThsV8RUa8/tiEnxAki43tfBFS3SEKhtQsTm2g1z4miwbE3p0 BJIrSgTqrP/SBq7a9z/thPrkzdZcNuA9FUETTbaMeUlJS51n1V9E5A1t7sOG7jaI vV/gbuR6FjvD49mTyQiOSCt3V4ygRqgN1Q+C4QM8WLqq2keUq0AhGodquv8F78in J3x2j2r27lHY7jKf8B0dua/JXAsF20u8qD6yDQ9ymkjt/MWhGXBgK0jpT7RTIuMS e2jmTywUVD4UohAcx3inkOojUhIJ5KDB0I4Pzv4zWcHNbyFNKcY= =4VQl -----END PGP SIGNATURE----- Merge tag 'asm-generic-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cleanups from Arnd Bergmann: "A series from Baoquan He cleans up the asm-generic/io.h to remove the ioremap_uc() definition from everything except x86, which still needs it for pre-PAT systems. This series notably contains a patch from Jiaxun Yang that converts MIPS to use asm-generic/io.h like every other architecture does, enabling future cleanups. Some of my own patches fix -Wmissing-prototype warnings in architecture specific code across several architectures. This is now needed as the warning is enabled by default. There are still some remaining warnings in minor platforms, but the series should catch most of the widely used ones make them more consistent with one another. David McKay fixes a bug in __generic_cmpxchg_local() when this is used on 64-bit architectures. This could currently only affect parisc64 and sparc64. Additional cleanups address from Linus Walleij, Uwe Kleine-König, Thomas Huth, and Kefeng Wang help reduce unnecessary inconsistencies between architectures" * tag 'asm-generic-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: Fix 32 bit __generic_cmpxchg_local Hexagon: Make pfn accessors statics inlines ARC: mm: Make virt_to_pfn() a static inline mips: remove extraneous asm-generic/iomap.h include sparc: Use $(kecho) to announce kernel images being ready arm64: vdso32: Define BUILD_VDSO32_64 to correct prototypes csky: fix arch_jump_label_transform_static override arch: add do_page_fault prototypes arch: add missing prepare_ftrace_return() prototypes arch: vdso: consolidate gettime prototypes arch: include linux/cpu.h for trap_init() prototype arch: fix asm-offsets.c building with -Wmissing-prototypes arch: consolidate arch_irq_work_raise prototypes hexagon: Remove CONFIG_HEXAGON_ARCH_VERSION from uapi header asm/io: remove unnecessary xlate_dev_mem_ptr() and unxlate_dev_mem_ptr() mips: io: remove duplicated codes arch/*/io.h: remove ioremap_uc in some architectures mips: add <asm-generic/io.h> including |
||
|
Linus Torvalds
|
78273df7f6 |
header cleanups for 6.8
The goal is to get sched.h down to a type only header, so the main thing happening in this patchset is splitting out various _types.h headers and dependency fixups, as well as moving some things out of sched.h to better locations. This is prep work for the memory allocation profiling patchset which adds new sched.h interdepencencies. Testing - it's been in -next, and fixes from pretty much all architectures have percolated in - nothing major. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEKnAFLkS8Qha+jvQrE6szbY3KbnYFAmWfBwwACgkQE6szbY3K bnZPwBAAmuRojXaeWxi01IPIOehSGDe68vw44PR9glEMZvxdnZuPOdvE4/+245/L bRKU2WBCjBUokUbV9msIShwRkFTZAmEMPNfPAAsFMA+VXeDYHKB+ZRdwTggNAQ+I SG6fZgh5m0HsewCDxU8oqVHkjVq4fXn0cy+aL6xLEd9gu67GoBzX2pDieS2Kvy6j jnyoKTxFwb+LTQgph0P4EIpq5I2umAsdLwdSR8EJ+8e9NiNvMo1pI00Lx/ntAnFZ JftWUJcMy3TQ5u1GkyfQN9y/yThX1bZK5GvmHS9SJ2Dkacaus5d+xaKCHtRuFS1I 7C6b8PsNgRczUMumBXus44HdlNfNs1yU3lvVxFvBIPE1qC9pYRHrkWIXXIocXLLC oxTEJ6B2G3BQZVQgLIA4fOaxMVhmvKffi/aEZLi9vN9VVosd1a6XNKI6KbyRnXFp GSs9qDqszhn5I3GYNlDNQTc/8UsRlhPFgS6nS0By6QnvxtGi9QkU2tBRBsXvqwCy cLoCYIhc2tvugHvld70dz26umiJ4rnmxGlobStNoigDvIKAIUt1UmIdr1so8P8eH xehnL9ZcOX6xnANDL0AqMFFHV6I58CJynhFdUoXfVQf/DWLGX48mpi9LVNsYBzsI CAwVOAQ0UjGrpdWmJ9ueY/ABYqg9vRjzaDEXQ+MhAYO55CLaVsg= =3tyT -----END PGP SIGNATURE----- Merge tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs Pull header cleanups from Kent Overstreet: "The goal is to get sched.h down to a type only header, so the main thing happening in this patchset is splitting out various _types.h headers and dependency fixups, as well as moving some things out of sched.h to better locations. This is prep work for the memory allocation profiling patchset which adds new sched.h interdepencencies" * tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits) Kill sched.h dependency on rcupdate.h kill unnecessary thread_info.h include Kill unnecessary kernel.h include preempt.h: Kill dependency on list.h rseq: Split out rseq.h from sched.h LoongArch: signal.c: add header file to fix build error restart_block: Trim includes lockdep: move held_lock to lockdep_types.h sem: Split out sem_types.h uidgid: Split out uidgid_types.h seccomp: Split out seccomp_types.h refcount: Split out refcount_types.h uapi/linux/resource.h: fix include x86/signal: kill dependency on time.h syscall_user_dispatch.h: split out *_types.h mm_types_task.h: Trim dependencies Split out irqflags_types.h ipc: Kill bogus dependency on spinlock.h shm: Slim down dependencies workqueue: Split out workqueue_types.h ... |
||
|
Linus Torvalds
|
999a36b52b |
bcachefs updates for 6.8:
- btree write buffer rewrite: instead of adding keys to the btree write
buffer at transaction commit time, we know journal them with a
different journal entry type and copy them from the journal to the
write buffer just prior to journal write.
This reduces the number of atomic operations on shared cachelines
in the transaction commit path and is a signicant performance
improvement on some workloads: multithreaded 4k random writes went
from ~650k iops to ~850k iops.
- Bring back optimistic spinning for six locks: the new implementation
doesn't use osq locks; instead we add to the lock waitlist as normal,
and then spin on the lock_acquired bit in the waitlist entry, _not_
the lock itself.
- BCH_IOCTL_DEV_USAGE_V2, which allows for new data types
- BCH_IOCTL_OFFLINE_FSCK, which runs the kernel implementation of fsck
but without mounting: useful for transparently using the kernel
version of fsck from 'bcachefs fsck' when the kernel version is a
better match for the on disk filesystem.
- BCH_IOCTL_ONLINE_FSCK: online fsck. Not all passes are supported yet,
but the passes that are supported are fully featured - errors may be
corrected as normal.
The new ioctls use the new 'thread_with_file' abstraction for kicking
off a kthread that's tied to a file descriptor returned to userspace
via the ioctl.
- btree_paths within a btree_trans are now dynamically growable,
instead of being limited to 64. This is important for the
check_directory_structure phase of fsck, and also fixes some issues
we were having with btree path overflow in the reflink btree.
- Trigger refactoring; prep work for the upcoming disk space accounting
rewrite
- Numerous bugfixes :)
-----BEGIN PGP SIGNATURE-----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=JvA2
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-01-10' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs updates from Kent Overstreet:
- btree write buffer rewrite: instead of adding keys to the btree write
buffer at transaction commit time, we now journal them with a
different journal entry type and copy them from the journal to the
write buffer just prior to journal write.
This reduces the number of atomic operations on shared cachelines in
the transaction commit path and is a signicant performance
improvement on some workloads: multithreaded 4k random writes went
from ~650k iops to ~850k iops.
- Bring back optimistic spinning for six locks: the new implementation
doesn't use osq locks; instead we add to the lock waitlist as normal,
and then spin on the lock_acquired bit in the waitlist entry, _not_
the lock itself.
- New ioctls:
- BCH_IOCTL_DEV_USAGE_V2, which allows for new data types
- BCH_IOCTL_OFFLINE_FSCK, which runs the kernel implementation of
fsck but without mounting: useful for transparently using the
kernel version of fsck from 'bcachefs fsck' when the kernel
version is a better match for the on disk filesystem.
- BCH_IOCTL_ONLINE_FSCK: online fsck. Not all passes are supported
yet, but the passes that are supported are fully featured - errors
may be corrected as normal.
The new ioctls use the new 'thread_with_file' abstraction for kicking
off a kthread that's tied to a file descriptor returned to userspace
via the ioctl.
- btree_paths within a btree_trans are now dynamically growable,
instead of being limited to 64. This is important for the
check_directory_structure phase of fsck, and also fixes some issues
we were having with btree path overflow in the reflink btree.
- Trigger refactoring; prep work for the upcoming disk space accounting
rewrite
- Numerous bugfixes :)
* tag 'bcachefs-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (226 commits)
bcachefs: eytzinger0_find() search should be const
bcachefs: move "ptrs not changing" optimization to bch2_trigger_extent()
bcachefs: fix simulateously upgrading & downgrading
bcachefs: Restart recovery passes more reliably
bcachefs: bch2_dump_bset() doesn't choke on u64s == 0
bcachefs: improve checksum error messages
bcachefs: improve validate_bset_keys()
bcachefs: print sb magic when relevant
bcachefs: __bch2_sb_field_to_text()
bcachefs: %pg is banished
bcachefs: Improve would_deadlock trace event
bcachefs: fsck_err()s don't need to manually check c->sb.version anymore
bcachefs: Upgrades now specify errors to fix, like downgrades
bcachefs: no thread_with_file in userspace
bcachefs: Don't autofix errors we can't fix
bcachefs: add missing bch2_latency_acct() call
bcachefs: increase max_active on io_complete_wq
bcachefs: add time_stats for btree_node_read_done()
bcachefs: don't clear accessed bit in btree node fill
bcachefs: Add an option to control btree node prefetching
...
|
||
|
Linus Torvalds
|
0cb552aa97 |
This update includes the following changes:
API: - Add incremental lskcipher/skcipher processing. Algorithms: - Remove SHA1 from drbg. - Remove CFB and OFB. Drivers: - Add comp high perf mode configuration in hisilicon/zip. - Add support for 420xx devices in qat. - Add IAA Compression Accelerator driver. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmWdxR4ACgkQxycdCkmx i6fAjg//SqOwxeUYWpT4KdMCxGMn7U9iE3wJeX8nqfma3a62Wt2soey7H3GB9G7v gEh0OraOKIGeBtS8giIX83SZJOirMlgeE2tngxMmR9O95EUNR0XGnywF/emyt96z WcSN1IrRZ8qQzTASBF0KpV2Ir5mNzBiOwU9tVHIztROufA4C1fwKl7yhPM67C3MU 88vf1R+ZeWUbNbzQNC8oYIqU11dcNaMNhOVPiZCECKbIR6LqwUf3Swexz+HuPR/D WTSrb4J3Eeg77SMhI959/Hi53WeEyVW1vWYAVMgfTEFw6PESiOXyPeImfzUMFos6 fFYIAoQzoG5GlQeYwLLSoZAwtfY+f7gTNoaE+bnPk5317EFzFDijaXrkjjVKqkS2 OOBfxrMMIGNmxp7pPkt6HPnIvGNTo+SnbAdVIm6M3EN1K+BTGrj7/CTJkcT6XSyK nCBL6nbP7zMB1GJfCFGPvlIdW4oYnAfB1Q5YJ9tzYbEZ0t5NWxDKZ45RnM9xQp4Y 2V1zdfALdqmGRKBWgyUcqp1T4/AYRU0+WaQxz7gHw3BPR4QmfVLPRqiiR7OT0Z+P XFotOYD3epVXS1OUyZdLBn5+FXLnRd1uylQ+j8FNfnddr4Nr+tH1J6edK71NMvXG Tj7p5rP5bbgvVkD43ywsVnCI0w+9NS55mH5UP2Y4fSLS6p2tJAw= =yMmO -----END PGP SIGNATURE----- Merge tag 'v6.8-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add incremental lskcipher/skcipher processing Algorithms: - Remove SHA1 from drbg - Remove CFB and OFB Drivers: - Add comp high perf mode configuration in hisilicon/zip - Add support for 420xx devices in qat - Add IAA Compression Accelerator driver" * tag 'v6.8-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (172 commits) crypto: iaa - Account for cpu-less numa nodes crypto: scomp - fix req->dst buffer overflow crypto: sahara - add support for crypto_engine crypto: sahara - remove error message for bad aes request size crypto: sahara - remove unnecessary NULL assignments crypto: sahara - remove 'active' flag from sahara_aes_reqctx struct crypto: sahara - use dev_err_probe() crypto: sahara - use devm_clk_get_enabled() crypto: sahara - use BIT() macro crypto: sahara - clean up macro indentation crypto: sahara - do not resize req->src when doing hash operations crypto: sahara - fix processing hash requests with req->nbytes < sg->length crypto: sahara - improve error handling in sahara_sha_process() crypto: sahara - fix wait_for_completion_timeout() error handling crypto: sahara - fix ahash reqsize crypto: sahara - handle zero-length aes requests crypto: skcipher - remove excess kerneldoc members crypto: shash - remove excess kerneldoc members crypto: qat - generate dynamically arbiter mappings crypto: qat - add support for ring pair level telemetry ... |
||
|
Linus Torvalds
|
063a7ce32d |
lsm/stable-6.8 PR 20240105
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmWYKUIUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXNyHw/+IKnqL1MZ5QS+/HtSzi4jCL47N9yZ OHLol6XswyEGHH9myKPPGnT5lVA93v98v4ty2mws7EJUSGZQQUntYBPbU9Gi40+B XDzYSRocoj96sdlKeOJMgaWo3NBRD9HYSoGPDNWZixy6m+bLPk/Dqhn3FabKf1lo 2qQSmstvChFRmVNkmgaQnBCAtWVqla4EJEL0EKX6cspHbuzRNTeJdTPn6Q/zOUVL O2znOZuEtSVpYS7yg3uJT0hHD8H0GnIciAcDAhyPSBL5Uk5l6gwJiACcdRfLRbgp QM5Z4qUFdKljV5XBCzYnfhhrx1df08h1SG84El8UK8HgTTfOZfYmawByJRWNJSQE TdCmtyyvEbfb61CKBFVwD7Tzb9/y8WgcY5N3Un8uCQqRzFIO+6cghHri5NrVhifp nPFlP4klxLHh3d7ZVekLmCMHbpaacRyJKwLy+f/nwbBEID47jpPkvZFIpbalat+r QaKRBNWdTeV+GZ+Yu0uWsI029aQnpcO1kAnGg09fl6b/dsmxeKOVWebir25AzQ++ a702S8HRmj80X+VnXHU9a64XeGtBH7Nq0vu0lGHQPgwhSx/9P6/qICEPwsIriRjR I9OulWt4OBPDtlsonHFgDs+lbnd0Z0GJUwYT8e9pjRDMxijVO9lhAXyglVRmuNR8 to2ByKP5BO+Vh8Y= =Py+n -----END PGP SIGNATURE----- Merge tag 'lsm-pr-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm Pull security module updates from Paul Moore: - Add three new syscalls: lsm_list_modules(), lsm_get_self_attr(), and lsm_set_self_attr(). The first syscall simply lists the LSMs enabled, while the second and third get and set the current process' LSM attributes. Yes, these syscalls may provide similar functionality to what can be found under /proc or /sys, but they were designed to support multiple, simultaneaous (stacked) LSMs from the start as opposed to the current /proc based solutions which were created at a time when only one LSM was allowed to be active at a given time. We have spent considerable time discussing ways to extend the existing /proc interfaces to support multiple, simultaneaous LSMs and even our best ideas have been far too ugly to support as a kernel API; after +20 years in the kernel, I felt the LSM layer had established itself enough to justify a handful of syscalls. Support amongst the individual LSM developers has been nearly unanimous, with a single objection coming from Tetsuo (TOMOYO) as he is worried that the LSM_ID_XXX token concept will make it more difficult for out-of-tree LSMs to survive. Several members of the LSM community have demonstrated the ability for out-of-tree LSMs to continue to exist by picking high/unused LSM_ID values as well as pointing out that many kernel APIs rely on integer identifiers, e.g. syscalls (!), but unfortunately Tetsuo's objections remain. My personal opinion is that while I have no interest in penalizing out-of-tree LSMs, I'm not going to penalize in-tree development to support out-of-tree development, and I view this as a necessary step forward to support the push for expanded LSM stacking and reduce our reliance on /proc and /sys which has occassionally been problematic for some container users. Finally, we have included the linux-api folks on (all?) recent revisions of the patchset and addressed all of their concerns. - Add a new security_file_ioctl_compat() LSM hook to handle the 32-bit ioctls on 64-bit systems problem. This patch includes support for all of the existing LSMs which provide ioctl hooks, although it turns out only SELinux actually cares about the individual ioctls. It is worth noting that while Casey (Smack) and Tetsuo (TOMOYO) did not give explicit ACKs to this patch, they did both indicate they are okay with the changes. - Fix a potential memory leak in the CALIPSO code when IPv6 is disabled at boot. While it's good that we are fixing this, I doubt this is something users are seeing in the wild as you need to both disable IPv6 and then attempt to configure IPv6 labeled networking via NetLabel/CALIPSO; that just doesn't make much sense. Normally this would go through netdev, but Jakub asked me to take this patch and of all the trees I maintain, the LSM tree seemed like the best fit. - Update the LSM MAINTAINERS entry with additional information about our process docs, patchwork, bug reporting, etc. I also noticed that the Lockdown LSM is missing a dedicated MAINTAINERS entry so I've added that to the pull request. I've been working with one of the major Lockdown authors/contributors to see if they are willing to step up and assume a Lockdown maintainer role; hopefully that will happen soon, but in the meantime I'll continue to look after it. - Add a handful of mailmap entries for Serge Hallyn and myself. * tag 'lsm-pr-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (27 commits) lsm: new security_file_ioctl_compat() hook lsm: Add a __counted_by() annotation to lsm_ctx.ctx calipso: fix memory leak in netlbl_calipso_add_pass() selftests: remove the LSM_ID_IMA check in lsm/lsm_list_modules_test MAINTAINERS: add an entry for the lockdown LSM MAINTAINERS: update the LSM entry mailmap: add entries for Serge Hallyn's dead accounts mailmap: update/replace my old email addresses lsm: mark the lsm_id variables are marked as static lsm: convert security_setselfattr() to use memdup_user() lsm: align based on pointer length in lsm_fill_user_ctx() lsm: consolidate buffer size handling into lsm_fill_user_ctx() lsm: correct error codes in security_getselfattr() lsm: cleanup the size counters in security_getselfattr() lsm: don't yet account for IMA in LSM_CONFIG_COUNT calculation lsm: drop LSM_ID_IMA LSM: selftests for Linux Security Module syscalls SELinux: Add selfattr hooks AppArmor: Add selfattr hooks Smack: implement setselfattr and getselfattr hooks ... |
||
|
Linus Torvalds
|
9f2a635235 |
Quite a lot of kexec work this time around. Many singleton patches in
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in "nilfs2: Folio
conversions for file paths".
- Additional nilfs2 folio conversion from Ryusuke Konishi in "nilfs2:
Folio conversions for directory paths".
- IA64 remnant removal in Heiko Carstens's "Remove unused code after
IA-64 removal".
- Arnd Bergmann has enabled the -Wmissing-prototypes warning everywhere
in "Treewide: enable -Wmissing-prototypes". This had some followup
fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
"hexagon: Fix up instances of -Wmissing-prototypes".
- Nathan also addressed some s390 warnings in "s390: A couple of
fixes for -Wmissing-prototypes".
- Arnd Bergmann addresses the same warnings for MIPS in his series
"mips: address -Wmissing-prototypes warnings".
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series "kexec_file: Load kernel at top of
system RAM if required"
- Baoquan He has also added the self-explanatory "kexec_file: print out
debugging message if required".
- Some checkstack maintenance work from Tiezhu Yang in the series
"Modify some code about checkstack".
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is "watchdog:
Better handling of concurrent lockups".
- Yuntao Wang has contributed some maintenance work on the crash code in
"crash: Some cleanups and fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZ2R6AAKCRDdBJ7gKXxA
juCVAP4t76qUISDOSKugB/Dn5E4Nt9wvPY9PcufnmD+xoPsgkQD+JVl4+jd9+gAV
vl6wkJDiJO5JZ3FVtBtC3DFA/xHtVgk=
=kQw+
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Quite a lot of kexec work this time around. Many singleton patches in
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio
conversions for file paths'.
- Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2:
Folio conversions for directory paths'.
- IA64 remnant removal in Heiko Carstens's 'Remove unused code after
IA-64 removal'.
- Arnd Bergmann has enabled the -Wmissing-prototypes warning
everywhere in 'Treewide: enable -Wmissing-prototypes'. This had
some followup fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
'hexagon: Fix up instances of -Wmissing-prototypes'.
- Nathan also addressed some s390 warnings in 's390: A couple of
fixes for -Wmissing-prototypes'.
- Arnd Bergmann addresses the same warnings for MIPS in his series
'mips: address -Wmissing-prototypes warnings'.
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series 'kexec_file: Load kernel at top
of system RAM if required'
- Baoquan He has also added the self-explanatory 'kexec_file: print
out debugging message if required'.
- Some checkstack maintenance work from Tiezhu Yang in the series
'Modify some code about checkstack'.
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is
'watchdog: Better handling of concurrent lockups'.
- Yuntao Wang has contributed some maintenance work on the crash code
in 'crash: Some cleanups and fixes'"
* tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits)
crash_core: fix and simplify the logic of crash_exclude_mem_range()
x86/crash: use SZ_1M macro instead of hardcoded value
x86/crash: remove the unused image parameter from prepare_elf_headers()
kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE
scripts/decode_stacktrace.sh: strip unexpected CR from lines
watchdog: if panicking and we dumped everything, don't re-enable dumping
watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/hardlockup: adopt softlockup logic avoiding double-dumps
kexec_core: fix the assignment to kimage->control_page
x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init()
lib/trace_readwrite.c:: replace asm-generic/io with linux/io
nilfs2: cpfile: fix some kernel-doc warnings
stacktrace: fix kernel-doc typo
scripts/checkstack.pl: fix no space expression between sp and offset
x86/kexec: fix incorrect argument passed to kexec_dprintk()
x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs
nilfs2: add missing set_freezable() for freezable kthread
kernel: relay: remove relay_file_splice_read dead code, doesn't work
docs: submit-checklist: remove all of "make namespacecheck"
...
|
||
|
Linus Torvalds
|
fb46e22a9e |
Many singleton patches against the MM code. The patch series which
are included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the
series
"maple_tree: add mt_free_one() and mt_attr() helpers"
"Some cleanups of maple tree"
- In the series "mm: use memmap_on_memory semantics for dax/kmem"
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few
fixes) in the patch series
"Add folio_zero_tail() and folio_fill_tail()"
"Make folio_start_writeback return void"
"Fix fault handler's handling of poisoned tail pages"
"Convert aops->error_remove_page to ->error_remove_folio"
"Finish two folio conversions"
"More swap folio conversions"
- Kefeng Wang has also contributed folio-related work in the series
"mm: cleanup and use more folio in page fault"
- Jim Cromie has improved the kmemleak reporting output in the
series "tweak kmemleak report format".
- In the series "stackdepot: allow evicting stack traces" Andrey
Konovalov to permits clients (in this case KASAN) to cause
eviction of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series "mm:
page_alloc: fixes for high atomic reserve caluculations".
- Dmitry Rokosov has added to the samples/ dorectory some sample
code for a userspace memcg event listener application. See the
series "samples: introduce cgroup events listeners".
- Some mapletree maintanance work from Liam Howlett in the series
"maple_tree: iterator state changes".
- Nhat Pham has improved zswap's approach to writeback in the
series "workload-specific and memory pressure-driven zswap
writeback".
- DAMON/DAMOS feature and maintenance work from SeongJae Park in
the series
"mm/damon: let users feed and tame/auto-tune DAMOS"
"selftests/damon: add Python-written DAMON functionality tests"
"mm/damon: misc updates for 6.8"
- Yosry Ahmed has improved memcg's stats flushing in the series
"mm: memcg: subtree stats flushing and thresholds".
- In the series "Multi-size THP for anonymous memory" Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series "More buffer_head
cleanups".
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
"userfaultfd move option". UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a "KSM Advisor", in the series
"mm/ksm: Add ksm advisor". This is a governor which tunes KSM's
scanning aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory
use in the series "mm/zswap: dstmem reuse optimizations and
cleanups".
- Matthew Wilcox has performed some maintenance work on the
writeback code, both code and within filesystems. The series is
"Clean up the writeback paths".
- Andrey Konovalov has optimized KASAN's handling of alloc and
free stack traces for secondary-level allocators, in the series
"kasan: save mempool stack traces".
- Andrey also performed some KASAN maintenance work in the series
"kasan: assorted clean-ups".
- David Hildenbrand has gone to town on the rmap code. Cleanups,
more pte batching, folio conversions and more. See the series
"mm/rmap: interface overhaul".
- Kinsey Ho has contributed some maintenance work on the MGLRU
code in the series "mm/mglru: Kconfig cleanup".
- Matthew Wilcox has contributed lruvec page accounting code
cleanups in the series "Remove some lruvec page accounting
functions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZyF2wAKCRDdBJ7gKXxA
jjWjAP42LHvGSjp5M+Rs2rKFL0daBQsrlvy6/jCHUequSdWjSgEAmOx7bc5fbF27
Oa8+DxGM9C+fwqZ/7YxU2w/WuUmLPgU=
=0NHs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
|
||
|
Linus Torvalds
|
aac4de465a |
Performance events changes for v6.8 are:
- Add branch stack counters ABI extension to better capture
the growing amount of information the PMU exposes via
branch stack sampling. There's matching tooling support.
- Fix race when creating the nr_addr_filters sysfs file
- Add Intel Sierra Forest and Grand Ridge intel/cstate
PMU support.
- Add Intel Granite Rapids, Sierra Forest and Grand Ridge
uncore PMU support.
- Misc cleanups & fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=2O/5
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
- Add branch stack counters ABI extension to better capture the growing
amount of information the PMU exposes via branch stack sampling.
There's matching tooling support.
- Fix race when creating the nr_addr_filters sysfs file
- Add Intel Sierra Forest and Grand Ridge intel/cstate PMU support
- Add Intel Granite Rapids, Sierra Forest and Grand Ridge uncore PMU
support
- Misc cleanups & fixes
* tag 'perf-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Factor out topology_gidnid_map()
perf/x86/intel/uncore: Fix NULL pointer dereference issue in upi_fill_topology()
perf/x86/amd: Reject branch stack for IBS events
perf/x86/intel/uncore: Support Sierra Forest and Grand Ridge
perf/x86/intel/uncore: Support IIO free-running counters on GNR
perf/x86/intel/uncore: Support Granite Rapids
perf/x86/uncore: Use u64 to replace unsigned for the uncore offsets array
perf/x86/intel/uncore: Generic uncore_get_uncores and MMIO format of SPR
perf: Fix the nr_addr_filters fix
perf/x86/intel/cstate: Add Grand Ridge support
perf/x86/intel/cstate: Add Sierra Forest support
x86/smp: Export symbol cpu_clustergroup_mask()
perf/x86/intel/cstate: Cleanup duplicate attr_groups
perf/core: Fix narrow startup race when creating the perf nr_addr_filters sysfs file
perf/x86/intel: Support branch counters logging
perf/x86/intel: Reorganize attrs and is_visible
perf: Add branch_sample_call_stack
perf/x86: Add PERF_X86_EVENT_NEEDS_BRANCH_STACK flag
perf: Add branch stack counters
|
||
|
Linus Torvalds
|
968b803324 |
powerpc updates for 6.8
- Add initial support to recognise the HeXin C2000 processor.
- Add papr-vpd and papr-sysparm character device drivers for VPD & sysparm
retrieval, so userspace tools can be adapted to avoid doing raw firmware
calls from userspace.
- Sched domains optimisations for shared processor partitions on P9/P10.
- A series of optimisations for KVM running as a nested HV under PowerVM.
- Other small features and fixes.
Thanks to: Aditya Gupta, Aneesh Kumar K.V, Arnd Bergmann, Christophe Leroy,
Colin Ian King, Dario Binacchi, David Heidelberg, Geoff Levand, Gustavo A.
R. Silva, Haoran Liu, Jordan Niethe, Kajol Jain, Kevin Hao, Kunwu Chan, Li
kunyu, Li zeming, Masahiro Yamada, Michal Suchánek, Nathan Lynch, Naveen N Rao,
Nicholas Piggin, Randy Dunlap, Sathvika Vasireddy, Srikar Dronamraju, Stephen
Rothwell, Vaibhav Jain, Zhao Ke.
-----BEGIN PGP SIGNATURE-----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=LjlQ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add initial support to recognise the HeXin C2000 processor.
- Add papr-vpd and papr-sysparm character device drivers for VPD &
sysparm retrieval, so userspace tools can be adapted to avoid doing
raw firmware calls from userspace.
- Sched domains optimisations for shared processor partitions on
P9/P10.
- A series of optimisations for KVM running as a nested HV under
PowerVM.
- Other small features and fixes.
Thanks to Aditya Gupta, Aneesh Kumar K.V, Arnd Bergmann, Christophe
Leroy, Colin Ian King, Dario Binacchi, David Heidelberg, Geoff Levand,
Gustavo A. R. Silva, Haoran Liu, Jordan Niethe, Kajol Jain, Kevin Hao,
Kunwu Chan, Li kunyu, Li zeming, Masahiro Yamada, Michal Suchánek,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Randy Dunlap, Sathvika
Vasireddy, Srikar Dronamraju, Stephen Rothwell, Vaibhav Jain, and
Zhao Ke.
* tag 'powerpc-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (96 commits)
powerpc/ps3_defconfig: Disable PPC64_BIG_ENDIAN_ELF_ABI_V2
powerpc/86xx: Drop unused CONFIG_MPC8610
powerpc/powernv: Add error handling to opal_prd_range_is_valid
selftests/powerpc: Fix spelling mistake "EACCESS" -> "EACCES"
powerpc/hvcall: Reorder Nestedv2 hcall opcodes
powerpc/ps3: Add missing set_freezable() for ps3_probe_thread()
powerpc/mpc83xx: Use wait_event_freezable() for freezable kthread
powerpc/mpc83xx: Add the missing set_freezable() for agent_thread_fn()
powerpc/fsl: Fix fsl,tmu-calibration to match the schema
powerpc/smp: Dynamically build Powerpc topology
powerpc/smp: Avoid asym packing within thread_group of a core
powerpc/smp: Add __ro_after_init attribute
powerpc/smp: Disable MC domain for shared processor
powerpc/smp: Enable Asym packing for cores on shared processor
powerpc/sched: Cleanup vcpu_is_preempted()
powerpc: add cpu_spec.cpu_features to vmcoreinfo
powerpc/imc-pmu: Add a null pointer check in update_events_in_group()
powerpc/powernv: Add a null pointer check in opal_powercap_init()
powerpc/powernv: Add a null pointer check in opal_event_init()
powerpc/powernv: Add a null pointer check to scom_debug_init_one()
...
|
||
Kirill A. Shutemov
|
5e0a760b44 |
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
commit
|
||
|
Linus Torvalds
|
8c9440fea7 |
vfs-6.8.mount
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZZU0CgAKCRCRxhvAZXjc
osncAQDSJK0frJL+72NqXxa4YNzivrnuw6fhp5iaDAEqxdm8ygEAoJWyh7Rmkt8G
drAXWGyGnCYqv7UgC6axLyciid7TxQg=
=vJuv
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
"This contains the work to retrieve detailed information about mounts
via two new system calls. This is hopefully the beginning of the end
of the saga that started with fsinfo() years ago.
The LWN articles in [1] and [2] can serve as a summary so we can avoid
rehashing everything here.
At LSFMM in May 2022 we got into a room and agreed on what we want to
do about fsinfo(). Basically, split it into pieces. This is the first
part of that agreement. Specifically, it is concerned with retrieving
information about mounts. So this only concerns the mount information
retrieval, not the mount table change notification, or the extended
filesystem specific mount option work. That is separate work.
Currently mounts have a 32bit id. Mount ids are already in heavy use
by libmount and other low-level userspace but they can't be relied
upon because they're recycled very quickly. We agreed that mounts
should carry a unique 64bit id by which they can be referenced
directly. This is now implemented as part of this work.
The new 64bit mount id is exposed in statx() through the new
STATX_MNT_ID_UNIQUE flag. If the flag isn't raised the old mount id is
returned. If it is raised and the kernel supports the new 64bit mount
id the flag is raised in the result mask and the new 64bit mount id is
returned. New and old mount ids do not overlap so they cannot be
conflated.
Two new system calls are introduced that operate on the 64bit mount
id: statmount() and listmount(). A summary of the api and usage can be
found on LWN as well (cf. [3]) but of course, I'll provide a summary
here as well.
Both system calls rely on struct mnt_id_req. Which is the request
struct used to pass the 64bit mount id identifying the mount to
operate on. It is extensible to allow for the addition of new
parameters and for future use in other apis that make use of mount
ids.
statmount() mimicks the semantics of statx() and exposes a set flags
that userspace may raise in mnt_id_req to request specific information
to be retrieved. A statmount() call returns a struct statmount filled
in with information about the requested mount. Supported requests are
indicated by raising the request flag passed in struct mnt_id_req in
the @mask argument in struct statmount.
Currently we do support:
- STATMOUNT_SB_BASIC:
Basic filesystem info
- STATMOUNT_MNT_BASIC
Mount information (mount id, parent mount id, mount attributes etc)
- STATMOUNT_PROPAGATE_FROM
Propagation from what mount in current namespace
- STATMOUNT_MNT_ROOT
Path of the root of the mount (e.g., mount --bind /bla /mnt returns /bla)
- STATMOUNT_MNT_POINT
Path of the mount point (e.g., mount --bind /bla /mnt returns /mnt)
- STATMOUNT_FS_TYPE
Name of the filesystem type as the magic number isn't enough due to submounts
The string options STATMOUNT_MNT_{ROOT,POINT} and STATMOUNT_FS_TYPE
are appended to the end of the struct. Userspace can use the offsets
in @fs_type, @mnt_root, and @mnt_point to reference those strings
easily.
The struct statmount reserves quite a bit of space currently for
future extensibility. This isn't really a problem and if this bothers
us we can just send a follow-up pull request during this cycle.
listmount() is given a 64bit mount id via mnt_id_req just as
statmount(). It takes a buffer and a size to return an array of the
64bit ids of the child mounts of the requested mount. Userspace can
thus choose to either retrieve child mounts for a mount in batches or
iterate through the child mounts. For most use-cases it will be
sufficient to just leave space for a few child mounts. But for big
mount tables having an iterator is really helpful. Iterating through a
mount table works by setting @param in mnt_id_req to the mount id of
the last child mount retrieved in the previous listmount() call"
Link: https://lwn.net/Articles/934469 [1]
Link: https://lwn.net/Articles/829212 [2]
Link: https://lwn.net/Articles/950569 [3]
* tag 'vfs-6.8.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
add selftest for statmount/listmount
fs: keep struct mnt_id_req extensible
wire up syscalls for statmount/listmount
add listmount(2) syscall
statmount: simplify string option retrieval
statmount: simplify numeric option retrieval
add statmount(2) syscall
namespace: extract show_path() helper
mounts: keep list of mounts in an rbtree
add unique mount ID
|
||
|
Paolo Bonzini
|
fb872da8e7 |
Common KVM changes for 6.8:
- Use memdup_array_user() to harden against overflow. - Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures. -----BEGIN PGP SIGNATURE----- iQJGBAABCgAwFiEEMHr+pfEFOIzK+KY1YJEiAU0MEvkFAmWW8F4SHHNlYW5qY0Bn b29nbGUuY29tAAoJEGCRIgFNDBL5urcP/Rex6Too26aHJXelUVHlFOGw3hfOnvbq Wr/P3kPqB/1Mncx3aiYTpEvUxFjVTvIkMB5dWba39Eq/G1BbOT2CAHCunlvKJrXy L83YgOl17QtZZJS1KmLTRCj1umfl4Z0c+GEIH+P1FOuOmllNXlLJ1+GWmolP6LLf u4DF2/tyVZf8JXXeJWYITHsU0YQQ0MhHgYL8/aMYJK8epNFpR3wKIqT3428ASxV3 Ru4WH7jpYkFF7PaKbvjKdepr+1wyVt4PXJDDpciCScz45/8eebgfylLJbMglpsR1 JSUTzd6KdCbekgzp51NnRdoIxP+MXgKA3dIuzXKyIDzm2Xq6tna87ve/aWDGw8JC nUMkP/vAuaKT+/QTOwskGAvK2GYDQD1UwVcFNLi12Iis50H0qPwcxsUionQuZgUC ykCmY4N31rSX4DhPg1WLiqsvC/EeDhfXprYrfSd4HQq08NgD45orRJw0Kov+shcS xijIlE1e3aVJMRrbfoSWyc4m79AcooxjYwojQC1Ayqsq0ZTTzzIpd6rqjmY+LbLL aP/wNz8hCfMhFekUV7dDk9rMdZY+bBnTiolyKAN66E6EnPYfl2EdrDEGnZOCPXF4 L/O/kMCXHE90cszzrmiR40yNHLkPelij8sK+ligE4JpqteQ7ia/knh8YAiPBxDw6 XcIfftXMm5XG =wpT4 -----END PGP SIGNATURE----- Merge tag 'kvm-x86-generic-6.8' of https://github.com/kvm-x86/linux into HEAD Common KVM changes for 6.8: - Use memdup_array_user() to harden against overflow. - Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures. |
||
|
Paolo Bonzini
|
caadf876bb |
KVM: introduce CONFIG_KVM_COMMON
CONFIG_HAVE_KVM is currently used by some architectures to either
enabled the KVM config proper, or to enable host-side code that is
not part of the KVM module. However, CONFIG_KVM's "select" statement
in virt/kvm/Kconfig corresponds to a third meaning, namely to
enable common Kconfigs required by all architectures that support
KVM.
These three meanings can be replaced respectively by an
architecture-specific Kconfig, by IS_ENABLED(CONFIG_KVM), or by
a new Kconfig symbol that is in turn selected by the
architecture-specific "config KVM".
Start by introducing such a new Kconfig symbol, CONFIG_KVM_COMMON.
Unlike CONFIG_HAVE_KVM, it is selected by CONFIG_KVM, not by
architecture code, and it brings in all dependencies of common
KVM code. In particular, INTERVAL_TREE was missing in loongarch
and riscv, so that is another thing that is fixed.
Fixes:
|
||
|
Linus Torvalds
|
95c8a35f1c |
12 hotfixes. 2 are cc:stable and the remainder either address post-6.7
issues or aren't considered necessary for earlier kernel versions. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZhbAwAKCRDdBJ7gKXxA jiFeAQD20H8wGT9hbMUYr/PxE4rOxyDXlhnv/mZ0Av3neve4SQD/YlgCFWYpEu8G F5rEAtq89UYE13qlgS3o9KjYOPzhtgQ= =vZ0P -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2024-01-05-11-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc mm fixes from Andrew Morton: "12 hotfixes. Two are cc:stable and the remainder either address post-6.7 issues or aren't considered necessary for earlier kernel versions" * tag 'mm-hotfixes-stable-2024-01-05-11-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm: shrinker: use kvzalloc_node() from expand_one_shrinker_info() mailmap: add entries for Mathieu Othacehe MAINTAINERS: change vmware.com addresses to broadcom.com arch/mm/fault: fix major fault accounting when retrying under per-VMA lock mm/mglru: skip special VMAs in lru_gen_look_around() MAINTAINERS: hand over hwpoison maintainership to Miaohe Lin MAINTAINERS: remove hugetlb maintainer Mike Kravetz mm: fix unmap_mapping_range high bits shift bug mm: memcg: fix split queue list crash when large folio migration mm: fix arithmetic for max_prop_frac when setting max_ratio mm: fix arithmetic for bdi min_ratio mm: align larger anonymous mappings on THP boundaries |
||
|
Jakub Kicinski
|
e63c1822ac |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c |
||
|
Paolo Bonzini
|
136292522e |
LoongArch KVM changes for v6.8
1. Optimization for memslot hugepage checking. 2. Cleanup and fix some HW/SW timer issues. 3. Add LSX/LASX (128bit/256bit SIMD) support. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmWGu+0WHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImesO7D/wOdYP96R+mRzpLBeuTtFxU8e4A 3n2luxOeP8v1WYtQ9H8M01Wgly+9u6cJ2pgAlv79BQHfmCfC0aWQLmpnCZmk/mYW wtQ75ASA3Qg6zOBWEksCkA0LUdPDHfQuaaUXT7RYZ7QtHKSNkkhsw2nMCq6fgrXU RnZjGctjuxgYSqQtwzfYO2AjSBAfAq1MjSzCTULJ0KkE8o5Bg0KOoGj8ijC1U+ua QWBnqTNzeKmYmqAFfhXoiiFYcuBUq7DEk5RtwDU7SeqqJEV3a8AbbsrWfz+wMemG gri95uRxvnhpPZ+6/PrVjIezqexPJmQ9+tjY6mxh/bPRnS5ICFygjV3lt050JUK8 xIaJEFvl7g88RIz5mnTeM9tU4ibIsCLgA9zj33ps2H7QP5NazUm1dzk1YGAgqPdw m5hjwtTFQEujQM6cz1DLfhoi15VDNcYUonJIvGFZMhl7InitDpB3u9sI+AVGIVUG yKzBkqGB1L1vbJGnuWmspEqSUo7Z9iYzuVGbOnjc9LKQ/8OpLxj0brymYheA+CKG CIdULximQFVEHc2lbE+H+bW4hnrFP4sN9hlTng7KN7ommCIg+FltisM8Nt5NLWID 9ywLj4Qa0Qrc5vB3FJ8+ksuDe2nD83uVLj247R7B0wxQcYw4ocyW/YU+gayF4EjY 6azutwllW5ZB+I3hyw== =phol -----END PGP SIGNATURE----- Merge tag 'loongarch-kvm-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD LoongArch KVM changes for v6.8 1. Optimization for memslot hugepage checking. 2. Cleanup and fix some HW/SW timer issues. 3. Add LSX/LASX (128bit/256bit SIMD) support. |
||
Jamal Hadi Salim
|
6d6d80e4f6 |
net/sched: Remove CONFIG_NET_ACT_IPT from default configs
Now that we are retiring the IPT action. Reviewed-by: Victor Noguiera <victor@mojatatu.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Kent Overstreet
|
ee841b77b3 |
powerpc: Export kvm_guest static key, for bcachefs six locks
bcachefs's six locks need kvm_guest, via ower_on_cpu() -> vcpu_is_preempted() -> is_kvm_guest() Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Cc: linuxppc-dev@lists.ozlabs.org Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) |
||
Suren Baghdasaryan
|
46e714c729 |
arch/mm/fault: fix major fault accounting when retrying under per-VMA lock
A test [1] in Android test suite started failing after [2] was merged. It
turns out that after handling a major fault under per-VMA lock, the
process major fault counter does not register that fault as major. Before
[2] read faults would be done under mmap_lock, in which case
FAULT_FLAG_TRIED flag is set before retrying. That in turn causes
mm_account_fault() to account the fault as major once retry completes.
With per-VMA locks we often retry because a fault can't be handled without
locking the whole mm using mmap_lock. Therefore such retries do not set
FAULT_FLAG_TRIED flag. This logic does not work after [2] because we can
now handle read major faults under per-VMA lock and upon retry the fact
there was a major fault gets lost. Fix this by setting FAULT_FLAG_TRIED
after retrying under per-VMA lock if VM_FAULT_MAJOR was returned. Ideally
we would use an additional VM_FAULT bit to indicate the reason for the
retry (could not handle under per-VMA lock vs other reason) but this
simpler solution seems to work, so keeping it simple.
[1] https://cs.android.com/android/platform/superproject/+/master:test/vts-testcase/kernel/api/drop_caches_prop/drop_caches_test.cpp
[2] https://lore.kernel.org/all/20231006195318.4087158-6-willy@infradead.org/
Link: https://lkml.kernel.org/r/20231226214610.109282-1-surenb@google.com
Fixes:
|
||
|
Michael Ellerman
|
44a1aad2fe |
Merge branch 'topic/ppc-kvm' into next
Merge our topic branch containing KVM related patches. |
||
|
Geoff Levand
|
482b718a84 |
powerpc/ps3_defconfig: Disable PPC64_BIG_ENDIAN_ELF_ABI_V2
Commit |
||
|
Michael Ellerman
|
5bb13e63cb |
powerpc/86xx: Drop unused CONFIG_MPC8610
The MPC8610 symbol used to be default y if MPC8610_HPCD, but since
MPC8610_HPCD was removed MPC8610 is now never used. Remove it.
Fixes:
|
||
|
Linus Torvalds
|
f5837722ff |
11 hotfixes. 7 are cc:stable and the other 4 address post-6.6 issues or
are not considered backporting material. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZYys4AAKCRDdBJ7gKXxA jtmaAQC+o04Ia7IfB8MIqp1p7dNZQo64x/EnGA8YjUnQ8N6IwQD+ImU7dHl9g9Oo ROiiAbtMRBUfeJRsExX/Yzc1DV9E9QM= =ZGcs -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2023-12-27-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "11 hotfixes. 7 are cc:stable and the other 4 address post-6.6 issues or are not considered backporting material" * tag 'mm-hotfixes-stable-2023-12-27-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mailmap: add an old address for Naoya Horiguchi mm/memory-failure: cast index to loff_t before shifting it mm/memory-failure: check the mapcount of the precise page mm/memory-failure: pass the folio and the page to collect_procs() selftests: secretmem: floor the memory size to the multiple of page_size mm: migrate high-order folios in swap cache correctly maple_tree: do not preallocate nodes for slot stores mm/filemap: avoid buffered read/write race to read inconsistent data kunit: kasan_test: disable fortify string checker on kmalloc_oob_memset kexec: select CRYPTO from KEXEC_FILE instead of depending on it kexec: fix KEXEC_FILE dependencies |
||
|
Kent Overstreet
|
1e2f2d3199 |
Kill sched.h dependency on rcupdate.h
by moving cond_resched_rcu() to rcupdate_wait.h, we can kill another big sched.h dependency. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> |
||
|
Kent Overstreet
|
932562a604 |
rseq: Split out rseq.h from sched.h
We're trying to get sched.h down to more or less just types only, not code - rseq can live in its own header. This helps us kill the dependency on preempt.h in sched.h. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> |
||
Haoran Liu
|
e6beb47edb |
powerpc/powernv: Add error handling to opal_prd_range_is_valid
In the opal_prd_range_is_valid function within opal-prd.c, error handling was missing for the of_get_address call. This patch adds necessary error checking, ensuring that the function gracefully handles scenarios where of_get_address fails. Signed-off-by: Haoran Liu <liuhaoran14@163.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231127144108.29782-1-liuhaoran14@163.com |
||
Vaibhav Jain
|
eb8446e164 |
powerpc/hvcall: Reorder Nestedv2 hcall opcodes
Reorder the newly introduced hcall opcodes for Nestedv2 to follow the
increasing-opcode-number convention followed in 'hvcall.h'.
Also updates the value for MAX_HCALL_OPCODE which is used in various
places in arch code for range checking. Notably in the KVM enabled-hcall
logic, and in hcall tracing.
Fixes:
|
||
Kevin Hao
|
ccc0f7b767 |
powerpc/ps3: Add missing set_freezable() for ps3_probe_thread()
The kernel thread function ps3_probe_thread() invokes the try_to_freeze() in its loop. But all the kernel threads are non-freezable by default. So if we want to make a kernel thread to be freezable, we have to invoke set_freezable() explicitly. Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231221044510.1802429-4-haokexin@gmail.com |
||
|
Kevin Hao
|
11611d254c |
powerpc/mpc83xx: Use wait_event_freezable() for freezable kthread
A freezable kernel thread can enter frozen state during freezing by either calling try_to_freeze() or using wait_event_freezable() and its variants. So for the following snippet of code in a kernel thread loop: wait_event_interruptible(); try_to_freeze(); We can change it to a simple wait_event_freezable() and then eliminate a function call. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231221044510.1802429-3-haokexin@gmail.com |
||
|
Kevin Hao
|
6addc560e6 |
powerpc/mpc83xx: Add the missing set_freezable() for agent_thread_fn()
The kernel thread function agent_thread_fn() invokes the try_to_freeze() in its loop. But all the kernel threads are non-freezable by default. So if we want to make a kernel thread to be freezable, we have to invoke set_freezable() explicitly. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231221044510.1802429-2-haokexin@gmail.com |
||
|
Baoquan He
|
63b642e952 |
kexec_file, power: print out debugging message if required
Then when specifying '-d' for kexec_file_load interface, loaded locations of kernel/initrd/cmdline etc can be printed out to help debug. Here replace pr_debug() with the newly added kexec_dprintk() in kexec_file loading related codes. Link: https://lkml.kernel.org/r/20231213055747.61826-7-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Conor Dooley <conor@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Arnd Bergmann
|
c1ad12ee0e |
kexec: fix KEXEC_FILE dependencies
The cleanup for the CONFIG_KEXEC Kconfig logic accidentally changed the 'depends on CRYPTO=y' dependency to a plain 'depends on CRYPTO', which causes a link failure when all the crypto support is in a loadable module and kexec_file support is built-in: x86_64-linux-ld: vmlinux.o: in function `__x64_sys_kexec_file_load': (.text+0x32e30a): undefined reference to `crypto_alloc_shash' x86_64-linux-ld: (.text+0x32e58e): undefined reference to `crypto_shash_update' x86_64-linux-ld: (.text+0x32e6ee): undefined reference to `crypto_shash_final' Both s390 and x86 have this problem, while ppc64 and riscv have the correct dependency already. On riscv, the dependency is only used for the purgatory, not for the kexec_file code itself, which may be a bit surprising as it means that with CONFIG_CRYPTO=m, it is possible to enable KEXEC_FILE but then the purgatory code is silently left out. Move this into the common Kconfig.kexec file in a way that is correct everywhere, using the dependency on CRYPTO_SHA256=y only when the purgatory code is available. This requires reversing the dependency between ARCH_SUPPORTS_KEXEC_PURGATORY and KEXEC_FILE, but the effect remains the same, other than making riscv behave like the other ones. On s390, there is an additional dependency on CRYPTO_SHA256_S390, which should technically not be required but gives better performance. Remove this dependency here, noting that it was not present in the initial Kconfig code but was brought in without an explanation in commit |
||
David Heidelberg
|
9ec1d7486e |
powerpc/fsl: Fix fsl,tmu-calibration to match the schema
fsl,tmu-calibration is defined as a u32 matrix in Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml. Use matching property syntax. No functional changes. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231212184515.82886-2-david@ixit.cz |
||
|
Linus Torvalds
|
5ef3720d91 |
powerpc fixes for 6.7 #5
- Fix a bug where heavy VAS (accelerator) usage could race with partition
migration and prevent the migration from completing.
- Update MAINTAINERS to add Aneesh & Naveen.
Thanks to: Haren Myneni
-----BEGIN PGP SIGNATURE-----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=MaRL
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a bug where heavy VAS (accelerator) usage could race with
partition migration and prevent the migration from completing.
- Update MAINTAINERS to add Aneesh & Naveen.
Thanks to Haren Myneni.
* tag 'powerpc-6.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
MAINTAINERS: powerpc: Add Aneesh & Naveen
powerpc/pseries/vas: Migration suspend waits for no in-progress open windows
|
||
Jens Axboe
|
ae1914174a |
cred: get rid of CONFIG_DEBUG_CREDENTIALS
This code is rarely (never?) enabled by distros, and it hasn't caught anything in decades. Let's kill off this legacy debug code. Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michael Ellerman
|
8fc63a91e7 |
Merge branch 'smp-topo' into next
Merge a branch containing SMP topology updates from Srikar, purely so we can include the cover letter which has a lot of good detail here: PowerVM systems configured in shared processors mode have some unique challenges. Some device-tree properties will be missing on a shared processor. Hence some sched domains may not make sense for shared processor systems. Most shared processor systems are over-provisioned. Underlying PowerVM Hypervisor would schedule at a Big Core (SMT8) granularity. The most recent power processors support two almost independent cores. In a lightly loaded condition, it helps the overall system performance if we pack to lesser number of Big Cores. Since each thread-group is independent, running threads on both the thread-groups of a SMT8 core, should have a minimal adverse impact in non over provisioned scenarios. These changes in this patchset will not affect in the over provisioned scenario. If there are more threads than SMT domains, then asym_packing will not kick-in. System Configuration type=Shared mode=Uncapped smt=8 lcpu=96 mem=1066409344 kB cpus=96 ent=64.00 So *64 Entitled cores/ 96 Virtual processor* Scenario lscpu Architecture: ppc64le Byte Order: Little Endian CPU(s): 768 On-line CPU(s) list: 0-767 Model name: POWER10 (architected), altivec supported Model: 2.0 (pvr 0080 0200) Thread(s) per core: 8 Core(s) per socket: 16 Socket(s): 6 Hypervisor vendor: pHyp Virtualization type: para L1d cache: 6 MiB (192 instances) L1i cache: 9 MiB (192 instances) NUMA node(s): 6 NUMA node0 CPU(s): 0-7,32-39,80-87,128-135,176-183,224-231,272-279,320-327,368-375,416-423,464-471,512-519,560-567,608-615,656-663,704-711,752-759 NUMA node1 CPU(s): 8-15,40-47,88-95,136-143,184-191,232-239,280-287,328-335,376-383,424-431,472-479,520-527,568-575,616-623,664-671,712-719,760-767 NUMA node4 CPU(s): 64-71,112-119,160-167,208-215,256-263,304-311,352-359,400-407,448-455,496-503,544-551,592-599,640-647,688-695,736-743 NUMA node5 CPU(s): 16-23,48-55,96-103,144-151,192-199,240-247,288-295,336-343,384-391,432-439,480-487,528-535,576-583,624-631,672-679,720-727 NUMA node6 CPU(s): 72-79,120-127,168-175,216-223,264-271,312-319,360-367,408-415,456-463,504-511,552-559,600-607,648-655,696-703,744-751 NUMA node7 CPU(s): 24-31,56-63,104-111,152-159,200-207,248-255,296-303,344-351,392-399,440-447,488-495,536-543,584-591,632-639,680-687,728-735 ebizzy -t 32 -S 200 (5 iterations) Records per second. (Higher is better) Kernel N Min Max Median Avg Stddev %Change 6.6.0-rc3 5 3840178 4059268 3978042 3973936.6 84264.456 +patch 5 3768393 3927901 3874994 3854046 71532.926 -3.01692 >From lparstat (when the workload stabilized) Kernel %user %sys %wait %idle physc %entc lbusy app vcsw phint 6.6.0-rc3 4.16 0.00 0.00 95.84 26.06 40.72 4.16 69.88 276906989 578 +patch 4.16 0.00 0.00 95.83 17.70 27.66 4.17 78.26 70436663 119 ebizzy -t 128 -S 200 (5 iterations) Records per second. (Higher is better) Kernel N Min Max Median Avg Stddev %Change 6.6.0-rc3 5 5520692 5981856 5717709 5727053.2 176093.2 +patch 5 5305888 6259610 5854590 5843311 375917.03 2.02998 >From lparstat (when the workload stabilized) Kernel %user %sys %wait %idle physc %entc lbusy app vcsw phint 6.6.0-rc3 16.66 0.00 0.00 83.33 45.49 71.08 16.67 50.50 288778533 581 +patch 16.65 0.00 0.00 83.35 30.15 47.11 16.65 65.76 85196150 133 ebizzy -t 512 -S 200 (5 iterations) Records per second. (Higher is better) Kernel N Min Max Median Avg Stddev %Change 6.6.0-rc3 5 19563921 20049955 19701510 19728733 198295.18 +patch 5 19455992 20176445 19718427 19832017 304094.05 0.523521 >From lparstat (when the workload stabilized) %Kernel user %sys %wait %idle physc %entc lbusy app vcsw phint 66.6.0-rc3 6.44 0.01 0.00 33.55 94.14 147.09 66.45 1.33 313345175 621 6+patch 6.44 0.01 0.00 33.55 94.15 147.11 66.45 1.33 109193889 309 System Configuration type=Shared mode=Uncapped smt=8 lcpu=40 mem=1067539392 kB cpus=96 ent=40.00 So *40 Entitled cores/ 40 Virtual processor* Scenario lscpu Architecture: ppc64le Byte Order: Little Endian CPU(s): 320 On-line CPU(s) list: 0-319 Model name: POWER10 (architected), altivec supported Model: 2.0 (pvr 0080 0200) Thread(s) per core: 8 Core(s) per socket: 10 Socket(s): 4 Hypervisor vendor: pHyp Virtualization type: para L1d cache: 2.5 MiB (80 instances) L1i cache: 3.8 MiB (80 instances) NUMA node(s): 4 NUMA node0 CPU(s): 0-7,32-39,64-71,96-103,128-135,160-167,192-199,224-231,256-263,288-295 NUMA node1 CPU(s): 8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 NUMA node4 CPU(s): 16-23,48-55,80-87,112-119,144-151,176-183,208-215,240-247,272-279,304-311 NUMA node5 CPU(s): 24-31,56-63,88-95,120-127,152-159,184-191,216-223,248-255,280-287,312-319 ebizzy -t 32 -S 200 (5 iterations) Records per second. (Higher is better) Kernel N Min Max Median Avg Stddev %Change 6.6.0-rc3 5 3535518 3864532 3745967 3704233.2 130216.76 +patch 5 3608385 3708026 3649379 3651596.6 37862.163 -1.42099 %Kernel user %sys %wait %idle physc %entc lbusy app vcsw phint 6.6.0-rc3 10.00 0.01 0.00 89.99 22.98 57.45 10.01 41.01 1135139 262 +patch 10.00 0.00 0.00 90.00 16.95 42.37 10.00 47.05 925561 19 ebizzy -t 64 -S 200 (5 iterations) Records per second. (Higher is better) Kernel N Min Max Median Avg Stddev %Change 6.6.0-rc3 5 4434984 4957281 4548786 4591298.2 211770.2 +patch 5 4461115 4835167 4544716 4607795.8 151474.85 0.359323 %Kernel user %sys %wait %idle physc %entc lbusy app vcsw phint 6.6.0-rc3 20.01 0.00 0.00 79.99 38.22 95.55 20.01 25.77 1287553 265 +patch 19.99 0.00 0.00 80.01 25.55 63.88 19.99 38.44 1077341 20 ebizzy -t 256 -S 200 (5 iterations) Records per second. (Higher is better) Kernel N Min Max Median Avg Stddev %Change 6.6.0-rc3 5 8850648 8982659 8951911 8936869.2 52278.031 +patch 5 8751038 9060510 8981409 8942268.4 117070.6 0.0604149 %Kernel user %sys %wait %idle physc %entc lbusy app vcsw phint 6.6.0-rc3 80.02 0.01 0.01 19.96 40.00 100.00 80.03 24.00 1597665 276 +patch 80.02 0.01 0.01 19.96 40.00 100.00 80.03 23.99 1383921 63 Observation: We are able to see Improvement in ebizzy throughput even with lesser core utilization (almost half the core utilization) in low utilization scenarios while still retaining throughput in mid and higher utilization scenarios. Note: The numbers are with Uncapped + no-noise case. In the Capped and/or noise case, due to contention on the Cores, the numbers are expected to further improve. Note: The numbers included (sched/fair: Enable group_asym_packing in find_idlest_group) https://lore.kernel.org/all/20231018155036.2314342-1-srikar@linux.vnet.ibm.com/ |
||
Srikar Dronamraju
|
c46975715f |
powerpc/smp: Dynamically build Powerpc topology
Currently there are four Powerpc specific sched topologies. These are all statically defined. However not all these topologies are used by all Powerpc systems. To avoid unnecessary degenerations by the scheduler, masks and flags are compared. However if the sched topologies are build dynamically then the code is simpler and there are greater chances of avoiding degenerations. Note: Even X86 builds its sched topologies dynamically and proposed changes are very similar to the way X86 is building its topologies. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231214180720.310852-6-srikar@linux.vnet.ibm.com |
||
|
Srikar Dronamraju
|
0e93f1c780 |
powerpc/smp: Avoid asym packing within thread_group of a core
PowerVM Hypervisor will schedule at a core granularity. However each core can have more than one thread_groups. For better utilization in case of a shared processor, its preferable for the scheduler to pack to the lowest core. However there is no benefit of moving a thread between two thread groups of the same core. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231214180720.310852-5-srikar@linux.vnet.ibm.com |
||
|
Srikar Dronamraju
|
fd535a858e |
powerpc/smp: Add __ro_after_init attribute
There are some variables that are only updated at boot time. So add __ro_after_init attribute to such variables Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231214180720.310852-4-srikar@linux.vnet.ibm.com |
||
|
Srikar Dronamraju
|
0e1c1986e0 |
powerpc/smp: Disable MC domain for shared processor
Like L2-cache info, coregroup information which is used to determine MC sched domains is only present on dedicated LPARs. i.e PowerVM doesn't export coregroup information for shared processor LPARs. Hence disable creating MC domains on shared LPAR Systems. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231214180720.310852-3-srikar@linux.vnet.ibm.com |
||
|
Srikar Dronamraju
|
aa80c6343f |
powerpc/smp: Enable Asym packing for cores on shared processor
If there are shared processor LPARs, underlying Hypervisor can have more virtual cores to handle than actual physical cores. Starting with Power 9, a big core (aka SMT8 core) has 2 nearly independent thread groups. On a shared processors LPARs, it helps to pack threads to lesser number of cores so that the overall system performance and utilization improves. PowerVM schedules at a big core level. Hence packing to fewer cores helps. Since each thread-group is independent, running threads on both the thread-groups of a SMT8 core, should have a minimal adverse impact in non over provisioned scenarios. These changes in this patchset will not affect in the over provisioned scenario. If there are more threads than SMT domains, then asym_packing will not kick-in For example: Lets says there are two 8-core Shared LPARs that are actually sharing a 8 Core shared physical pool, each running 8 threads each. Then Consolidating 8 threads to 4 cores on each LPAR would help them to perform better. This is because each of the LPAR will get 100% time to run applications and there will no switching required by the Hypervisor. To achieve this, enable SD_ASYM_PACKING flag at CACHE, MC and DIE level when the system is running in shared processor mode and has big cores. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231214180720.310852-2-srikar@linux.vnet.ibm.com |
||
Aneesh Kumar K.V
|
6f4b7052da |
powerpc/sched: Cleanup vcpu_is_preempted()
No functional change in this patch. A helper is added to find if vcpu is dispatched by hypervisor. Use that instead of opencoding. Also clarify some of the comments. Signed-off-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231114071219.198222-1-aneesh.kumar@linux.ibm.com |
||
Miklos Szeredi
|
d8b0f54650
|
wire up syscalls for statmount/listmount
Wire up all archs. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-7-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
Aditya Gupta
|
a143892cb7 |
powerpc: add cpu_spec.cpu_features to vmcoreinfo
CPU features can be determined in makedumpfile, using 'cur_cpu_spec.cpu_features'. This provides more data to makedumpfile about the crashed system, and can help in filtering the vmcore accordingly. Signed-off-by: Aditya Gupta <adityag@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230920105706.853626-2-adityag@linux.ibm.com |
||
|
Kunwu Chan
|
0a233867a3 |
powerpc/imc-pmu: Add a null pointer check in update_events_in_group()
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fixes:
|
||
|
Kunwu Chan
|
e123015c0b |
powerpc/powernv: Add a null pointer check in opal_powercap_init()
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fixes:
|
||
|
Kunwu Chan
|
8649829a1d |
powerpc/powernv: Add a null pointer check in opal_event_init()
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fixes:
|
||
|
Kunwu Chan
|
9a260f2dd8 |
powerpc/powernv: Add a null pointer check to scom_debug_init_one()
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Add a null pointer check, and release 'ent' to avoid memory leaks.
Fixes:
|
||
|
Kunwu Chan
|
f46c8a7526 |
powerpc/mm: Fix null-pointer dereference in pgtable_cache_add
kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity. Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231204023223.2447523-1-chentao@kylinos.cn |
||
Haren Myneni
|
0cf72f7f14 |
powerpc/pseries/vas: Migration suspend waits for no in-progress open windows
The hypervisor returns migration failure if all VAS windows are not
closed. During pre-migration stage, vas_migration_handler() sets
migration_in_progress flag and closes all windows from the list.
The allocate VAS window routine checks the migration flag, setup
the window and then add it to the list. So there is possibility of
the migration handler missing the window that is still in the
process of setup.
t1: Allocate and open VAS t2: Migration event
window
lock vas_pseries_mutex
If migration_in_progress set
unlock vas_pseries_mutex
return
open window HCALL
unlock vas_pseries_mutex
Modify window HCALL lock vas_pseries_mutex
setup window migration_in_progress=true
Closes all windows from the list
// May miss windows that are
// not in the list
unlock vas_pseries_mutex
lock vas_pseries_mutex return
if nr_closed_windows == 0
// No DLPAR CPU or migration
add window to the list
// Window will be added to the
// list after the setup is completed
unlock vas_pseries_mutex
return
unlock vas_pseries_mutex
Close VAS window
// due to DLPAR CPU or migration
return -EBUSY
This patch resolves the issue with the following steps:
- Set the migration_in_progress flag without holding mutex.
- Introduce nr_open_wins_progress counter in VAS capabilities
struct
- This counter tracks the number of open windows are still in
progress
- The allocate setup window thread closes windows if the migration
is set and decrements nr_open_window_progress counter
- The migration handler waits for no in-progress open windows.
The code flow with the fix is as follows:
t1: Allocate and open VAS t2: Migration event
window
lock vas_pseries_mutex
If migration_in_progress set
unlock vas_pseries_mutex
return
open window HCALL
nr_open_wins_progress++
// Window opened, but not
// added to the list yet
unlock vas_pseries_mutex
Modify window HCALL migration_in_progress=true
setup window lock vas_pseries_mutex
Closes all windows from the list
While nr_open_wins_progress {
unlock vas_pseries_mutex
lock vas_pseries_mutex sleep
if nr_closed_windows == 0 // Wait if any open window in
or migration is not started // progress. The open window
// No DLPAR CPU or migration // thread closes the window without
add window to the list // adding to the list and return if
nr_open_wins_progress-- // the migration is in progress.
unlock vas_pseries_mutex
return
Close VAS window
nr_open_wins_progress--
unlock vas_pseries_mutex
return -EBUSY lock vas_pseries_mutex
}
unlock vas_pseries_mutex
return
Fixes:
|
||
|
Sathvika Vasireddy
|
b20f98e8b3 |
powerpc/Kconfig: Select FUNCTION_ALIGNMENT_4B
Commit
|
||
|
Naveen N Rao
|
ae24db43b3 |
powerpc/ftrace: Remove nops after the call to ftrace_stub
ftrace_stub is within the same CU, so there is no need for a subsequent nop instruction. Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/8ee5ec520e37d5523654bb2cd65a17512fb774e2.1702045299.git.naveen@kernel.org |
||
|
Naveen N Rao
|
2ec36570c3 |
powerpc/ftrace: Fix indentation in ftrace.h
Replace seven spaces with a tab character to fix an indentation issue reported by the kernel test robot. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311221731.alUwTDIm-lkp@intel.com/ Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/9f058227bd9243f0842786ef7228d87ab10d29f6.1702045299.git.naveen@kernel.org |
||
|
Nathan Lynch
|
905b9e4878 |
powerpc/pseries/papr-sysparm: Expose character device to user space
Until now the papr_sysparm APIs have been kernel-internal. But user space needs access to PAPR system parameters too. The only method available to user space today to get or set system parameters is using sys_rtas() and /dev/mem to pass RTAS-addressable buffers between user space and firmware. This is incompatible with lockdown and should be deprecated. So provide an alternative ABI to user space in the form of a /dev/papr-sysparm character device with just two ioctl commands (get and set). The data payloads involved are small enough to fit in the ioctl argument buffer, making the code relatively simple. Exposing the system parameters through sysfs has been considered but it would be too awkward: * The kernel currently does not have to contain an exhaustive list of defined system parameters. This is a convenient property to maintain because we don't have to update the kernel whenever a new parameter is added to PAPR. Exporting a named attribute in sysfs for each parameter would negate this. * Some system parameters are text-based and some are not. * Retrieval of at least one system parameter requires input data, which a simple read-oriented interface can't support. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-11-e9eafd0c8c6c@linux.ibm.com |
||
|
Nathan Lynch
|
35aae182bd |
powerpc/pseries/papr-sysparm: Validate buffer object lengths
The ability to get and set system parameters will be exposed to user space, so let's get a little more strict about malformed papr_sysparm_buf objects. * Create accessors for the length field of struct papr_sysparm_buf. The length is always stored in MSB order and this is better than spreading the necessary conversions all over. * Reject attempts to submit invalid buffers to RTAS. * Warn if RTAS returns a buffer with an invalid length, clamping the returned length to a safe value that won't overrun the buffer. These are meant as precautionary measures to mitigate both firmware and kernel bugs in this area, should they arise, but I am not aware of any. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-10-e9eafd0c8c6c@linux.ibm.com |
||
|
Nathan Lynch
|
514f6ff436 |
powerpc/pseries: Add papr-vpd character driver for VPD retrieval
PowerVM LPARs may retrieve Vital Product Data (VPD) for system
components using the ibm,get-vpd RTAS function.
We can expose this to user space with a /dev/papr-vpd character
device, where the programming model is:
struct papr_location_code plc = { .str = "", }; /* obtain all VPD */
int devfd = open("/dev/papr-vpd", O_RDONLY);
int vpdfd = ioctl(devfd, PAPR_VPD_CREATE_HANDLE, &plc);
size_t size = lseek(vpdfd, 0, SEEK_END);
char *buf = malloc(size);
pread(devfd, buf, size, 0);
When a file descriptor is obtained from ioctl(PAPR_VPD_CREATE_HANDLE),
the file contains the result of a complete ibm,get-vpd sequence. The
file contents are immutable from the POV of user space. To get a new
view of the VPD, the client must create a new handle.
This design choice insulates user space from most of the complexities
that ibm,get-vpd brings:
* ibm,get-vpd must be called more than once to obtain complete
results.
* Only one ibm,get-vpd call sequence should be in progress at a time;
interleaved sequences will disrupt each other. Callers must have a
protocol for serializing their use of the function.
* A call sequence in progress may receive a "VPD changed, try again"
status, requiring the client to abandon the sequence and start
over.
The memory required for the VPD buffers seems acceptable, around 20KB
for all VPD on one of my systems. And the value of the
/rtas/ibm,vpd-size DT property (the estimated maximum size of VPD) is
consistently 300KB across various systems I've checked.
I've implemented support for this new ABI in the rtas_get_vpd()
function in librtas, which the vpdupdate command currently uses to
populate its VPD database. I've verified that an unmodified vpdupdate
binary generates an identical database when using a librtas.so that
prefers the new ABI.
Along with the papr-vpd.h header exposed to user space, this
introduces a common papr-miscdev.h uapi header to share a base ioctl
ID with similar drivers to come.
Tested-by: Michal Suchánek <msuchanek@suse.de>
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-9-e9eafd0c8c6c@linux.ibm.com
|
||
|
Nathan Lynch
|
e3681107bc |
powerpc/rtas: Warn if per-function lock isn't held
If the function descriptor has a populated lock member, then callers are required to hold it across calls. Now that the firmware activation sequence is appropriately guarded, we can warn when the requirement isn't satisfied. __do_enter_rtas_trace() gets reorganized a bit as a result of performing the function descriptor lookup unconditionally now. Reviewed-by: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org> Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-8-e9eafd0c8c6c@linux.ibm.com |
||
|
Nathan Lynch
|
dc7637c402 |
powerpc/rtas: Serialize firmware activation sequences
Use rtas_ibm_activate_firmware_lock to prevent interleaving call sequences of the ibm,activate-firmware RTAS function, which typically requires multiple calls to complete the update. While the spec does not specifically prohibit interleaved sequences, there's almost certainly no advantage to allowing them. Reviewed-by: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org> Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-7-e9eafd0c8c6c@linux.ibm.com |
||
|
Nathan Lynch
|
adf7a019e5 |
powerpc/rtas: Facilitate high-level call sequences
On RTAS platforms there is a general restriction that the OS must not
enter RTAS on more than one CPU at a time. This low-level
serialization requirement is satisfied by holding a spin
lock (rtas_lock) across most RTAS function invocations.
However, some pseries RTAS functions require multiple successive calls
to complete a logical operation. Beginning a new call sequence for such a
function may disrupt any other sequences of that function already in
progress. Safe and reliable use of these functions effectively
requires higher-level serialization beyond what is already done at the
level of RTAS entry and exit.
Where a sequence-based RTAS function is invoked only through
sys_rtas(), with no in-kernel users, there is no issue as far as the
kernel is concerned. User space is responsible for appropriately
serializing its call sequences. (Whether user space code actually
takes measures to prevent sequence interleaving is another matter.)
Examples of such functions currently include ibm,platform-dump and
ibm,get-vpd.
But where a sequence-based RTAS function has both user space and
in-kernel uesrs, there is a hazard. Even if the in-kernel call sites
of such a function serialize their sequences correctly, a user of
sys_rtas() can invoke the same function at any time, potentially
disrupting a sequence in progress.
So in order to prevent disruption of kernel-based RTAS call sequences,
they must serialize not only with themselves but also with sys_rtas()
users, somehow. Preferably without adding more function-specific hacks
to sys_rtas(). This is a prerequisite for adding an in-kernel call
sequence of ibm,get-vpd, which is in a change to follow.
Note that it has never been feasible for the kernel to prevent
sys_rtas()-based sequences from being disrupted because control
returns to user space on every call. sys_rtas()-based users of these
functions have always been, and continue to be, responsible for
coordinating their call sequences with other users, even those which
may invoke the RTAS functions through less direct means than
sys_rtas(). This is an unavoidable consequence of exposing
sequence-based RTAS functions through sys_rtas().
* Add an optional mutex member to struct rtas_function.
* Statically define a mutex for each RTAS function with known call
sequence serialization requirements, and assign its address to the
.lock member of the corresponding function table entry, along with
justifying commentary.
* In sys_rtas(), if the table entry for the RTAS function being
called has a populated lock member, acquire it before taking
rtas_lock and entering RTAS.
* Kernel-based RTAS call sequences are expected to access the
appropriate mutex explicitly by name. For example, a user of the
ibm,activate-firmware RTAS function would do:
int token = rtas_function_token(RTAS_FN_IBM_ACTIVATE_FIRMWARE);
int fwrc;
mutex_lock(&rtas_ibm_activate_firmware_lock);
do {
fwrc = rtas_call(token, 0, 1, NULL);
} while (rtas_busy_delay(fwrc));
mutex_unlock(&rtas_ibm_activate_firmware_lock);
There should be no perceivable change introduced here except that
concurrent callers of the same RTAS function via sys_rtas() may block
on a mutex instead of spinning on rtas_lock.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-6-e9eafd0c8c6c@linux.ibm.com
|
||
|
Nathan Lynch
|
e7582edb78 |
powerpc/rtas: Move token validation from block_rtas_call() to sys_rtas()
The rtas system call handler sys_rtas() delegates certain input validation steps to a helper function: block_rtas_call(). One of these steps ensures that the user-supplied token value maps to a known RTAS function. This is done by performing a "reverse" token-to-function lookup via rtas_token_to_function_untrusted() to obtain an rtas_function object. In changes to come, sys_rtas() itself will need the function descriptor for the token. To prepare: * Move the lookup and validation up into sys_rtas() and pass the resulting rtas_function pointer to block_rtas_call(), which is otherwise unconcerned with the token value. * Change block_rtas_call() to report the RTAS function name instead of the token value on validation failures, since it can now rely on having a valid function descriptor. One behavior change is that sys_rtas() now silently errors out when passed a bad token, before calling block_rtas_call(). So we will no longer log "RTAS call blocked - exploit attempt?" on invalid tokens. This is consistent with how sys_rtas() currently handles other "metadata" (nargs and nret), while block_rtas_call() is primarily concerned with validating the arguments to be passed to specific RTAS functions. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-5-e9eafd0c8c6c@linux.ibm.com |
||
|
Nathan Lynch
|
9592aa5ad5 |
powerpc/rtas: Add function return status constants
Not all of the generic RTAS function statuses specified in PAPR have symbolic constants and descriptions in rtas.h. Fix this, providing a little more background, slightly updating the existing wording, and improving the formatting. Reviewed-by: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org> Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-4-e9eafd0c8c6c@linux.ibm.com |
||
|
Nathan Lynch
|
669acc7eec |
powerpc/rtas: Fall back to linear search on failed token->function lookup
Enabling any of the powerpc:rtas_* tracepoints at boot is likely to
result in an oops on RTAS platforms. For example, booting a QEMU
pseries model with 'trace_event=powerpc:rtas_input' in the command
line leads to:
BUG: Kernel NULL pointer dereference on read at 0x00000008
Oops: Kernel access of bad area, sig: 7 [#1]
NIP [c00000000004231c] do_enter_rtas+0x1bc/0x460
LR [c00000000004231c] do_enter_rtas+0x1bc/0x460
Call Trace:
do_enter_rtas+0x1bc/0x460 (unreliable)
rtas_call+0x22c/0x4a0
rtas_get_boot_time+0x80/0x14c
read_persistent_clock64+0x124/0x150
read_persistent_wall_and_boot_offset+0x28/0x58
timekeeping_init+0x70/0x348
start_kernel+0xa0c/0xc1c
start_here_common+0x1c/0x20
(This is preceded by a warning for the failed lookup in
rtas_token_to_function().)
This happens when __do_enter_rtas_trace() attempts a token to function
descriptor lookup before the xarray containing the mappings has been
set up.
Fall back to linear scan of the table if rtas_token_to_function_xarray
is empty.
Fixes:
|
||
|
Nathan Lynch
|
c500c6e736 |
powerpc/rtas: Add for_each_rtas_function() iterator
Add a convenience macro for iterating over every element of the internal function table and convert the one site that can use it. An additional user of the macro is anticipated in changes to follow. Reviewed-by: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org> Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-2-e9eafd0c8c6c@linux.ibm.com |
||
|
Nathan Lynch
|
01e346ffef |
powerpc/rtas: Avoid warning on invalid token argument to sys_rtas()
rtas_token_to_function() WARNs when passed an invalid token; it's
meant to catch bugs in kernel-based users of RTAS functions. However,
user space controls the token value passed to rtas_token_to_function()
by block_rtas_call(), so user space with sufficient privilege to use
sys_rtas() can trigger the warnings at will:
unexpected failed lookup for token 2048
WARNING: CPU: 20 PID: 2247 at arch/powerpc/kernel/rtas.c:556
rtas_token_to_function+0xfc/0x110
...
NIP rtas_token_to_function+0xfc/0x110
LR rtas_token_to_function+0xf8/0x110
Call Trace:
rtas_token_to_function+0xf8/0x110 (unreliable)
sys_rtas+0x188/0x880
system_call_exception+0x268/0x530
system_call_common+0x160/0x2c4
It's desirable to continue warning on bogus tokens in
rtas_token_to_function(). Currently it is used to look up RTAS
function descriptors when tracing, where we know there has to have
been a successful descriptor lookup by different means already, and it
would be a serious inconsistency for the reverse lookup to fail.
So instead of weakening rtas_token_to_function()'s contract by
removing the warnings, introduce rtas_token_to_function_untrusted(),
which has no opinion on failed lookups. Convert block_rtas_call() and
rtas_token_to_function() to use it.
Fixes:
|
||
|
Kajol Jain
|
070b71f428 |
powerpc/hv-gpci: Add return value check in affinity_domain_via_partition_show function
To access hv-gpci kernel interface files data, the
"Enable Performance Information Collection" option has to be set
in hmc. Incase that option is not set and user try to read
the interface files, it should give error message as
operation not permitted.
Result of accessing added interface files with disabled
performance collection option:
[command]# cat processor_bus_topology
cat: processor_bus_topology: Operation not permitted
[command]# cat processor_config
cat: processor_config: Operation not permitted
[command]# cat affinity_domain_via_domain
cat: affinity_domain_via_domain: Operation not permitted
[command]# cat affinity_domain_via_virtual_processor
cat: affinity_domain_via_virtual_processor: Operation not permitted
[command]# cat affinity_domain_via_partition
Based on above result there is no error message when reading
affinity_domain_via_partition file because of missing
check for failed hcall. Fix this issue by adding
a check in the start of affinity_domain_via_partition_show
function, to return error incase hcall fails, with error type
other then H_PARAMETER.
Fixes:
|
||
Greg Kroah-Hartman
|
e045e18dbf |
Merge 6.7-rc5 into tty-next
We need the serial fixes in here as well to build off of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Stephen Rothwell
|
bfc4372b86 |
powerpc: pmd_move_must_withdraw() is only needed for CONFIG_TRANSPARENT_HUGEPAGE
This is required for the later patch "Makefile.extrawarn: turn on missing-prototypes globally". Link: https://lkml.kernel.org/r/20231127132809.45c2b398@canb.auug.org.au Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Heiko Carstens
|
0eb5085c38 |
arch: remove ARCH_TASK_STRUCT_ON_STACK
IA-64 was the only architecture which selected ARCH_TASK_STRUCT_ON_STACK. IA-64 was removed with commit |
||
|
Paolo Bonzini
|
c5b31cc237 |
KVM: remove CONFIG_HAVE_KVM_IRQFD
All platforms with a kernel irqchip have support for irqfd. Unify the two configuration items so that userspace can expect to use irqfd to inject interrupts into the irqchip. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
8132d887a7 |
KVM: remove CONFIG_HAVE_KVM_EVENTFD
virt/kvm/eventfd.c is compiled unconditionally, meaning that the ioeventfds member of struct kvm is accessed unconditionally. CONFIG_HAVE_KVM_EVENTFD therefore must be defined for KVM common code to compile successfully, remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
Jiri Slaby (SUSE)
|
f32fcbedbe |
tty: hvc: convert to u8 and size_t
Switch character types to u8 and sizes to size_t. To conform to characters/sizes in the rest of the tty layer. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Amit Shah <amit@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: linuxppc-dev@lists.ozlabs.org Cc: virtualization@lists.linux.dev Cc: linux-riscv@lists.infradead.org Link: https://lore.kernel.org/r/20231206073712.17776-13-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Michael Ellerman
|
402928b58e |
powerpc/Makefile: Auto detect cross compiler
If no cross compiler is specified, try to auto detect one. Look for various combinations, matching: powerpc(64(le)?)?(-unknown)?-linux(-gnu)?- There are more possibilities, but the above is known to find a compiler on Fedora and Ubuntu (which use linux-gnu-), and also detects the kernel.org cross compilers (which use linux-). This allows cross compiling with simply: # Ubuntu $ sudo apt install gcc-powerpc-linux-gnu # Fedora $ sudo dnf install gcc-powerpc64-linux-gnu $ make ARCH=powerpc defconfig $ make ARCH=powerpc -j 4 Inspired by arch/parisc/Makefile. Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231206115548.1466874-4-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
22f17b02f8 |
powerpc/Makefile: Default to ppc64le_defconfig when cross building
If the kernel is being cross compiled, there is no information from uname on which defconfig is most appropriate, so the Makefile defaults to ppc64. However these days almost all distros that support powerpc are little endian, so it's more likely that defaulting to ppc64le_defconfig will produce something useful for a user. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231206115548.1466874-3-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
42449052c9 |
powerpc/vdso: No need to undef powerpc for 64-bit build
The vdso Makefile adds -U$(ARCH) to CPPFLAGS for the vdso64.lds linker script. ARCH is always powerpc, so it becomes -Upowerpc, which means undefine the "powerpc" symbol. But the 64-bit compiler doesn't define powerpc in the first place, compare: $ gcc-5.1.0-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc -m32 -E -dM - </dev/null | grep -w powerpc #define powerpc 1 $ gcc-5.1.0-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc -m64 -E -dM - </dev/null | grep -w powerpc $ So there's no need to undefine it for the 64-bit linker script. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231206115548.1466874-2-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
dc420877b5 |
powerpc/Makefile: Don't use $(ARCH) unnecessarily
There's no need to use $(ARCH) for references to the arch directory in the source tree, it is always arch/powerpc. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231206115548.1466874-1-mpe@ellerman.id.au |
||
Aneesh Kumar K.V (IBM)
|
a59c14f6b4 |
powerpc/book3s64: Avoid __pte_protnone() check in __pte_flags_need_flush()
This reverts commit
|
||
|
Aneesh Kumar K.V (IBM)
|
773b93f1d1 |
powerpc/book3s/hash: Drop _PAGE_PRIVILEGED from PAGE_NONE
There used to be a dependency on _PAGE_PRIVILEGED with pte_savedwrite. But that got dropped by commit |
||
Jordan Niethe
|
180c6b072b |
KVM: PPC: Book3S HV nestedv2: Do not cancel pending decrementer exception
In the nestedv2 case, if there is a pending decrementer exception, the L1 must get the L2's timebase from the L0 to see if the exception should be cancelled. This adds the overhead of a H_GUEST_GET_STATE call to the likely case in which the decrementer should not be cancelled. Avoid this logic for the nestedv2 case. Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231201132618.555031-13-vaibhav@linux.ibm.com |
||
|
Jordan Niethe
|
797a5af8fc |
KVM: PPC: Reduce reliance on analyse_instr() in mmio emulation
Commit |
||
|
Jordan Niethe
|
db1dcfae1d |
KVM: PPC: Book3S HV nestedv2: Register the VPA with the L0
In the nestedv2 case, the L1 may register the L2's VPA with the L0. This allows the L0 to manage the L2's dispatch count, as well as enable possible performance optimisations by seeing if certain resources are not being used by the L2 (such as the PMCs). Use the H_GUEST_SET_STATE call to inform the L0 of the L2's VPA address. This can not be done in the H_GUEST_VCPU_RUN input buffer. Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231201132618.555031-11-vaibhav@linux.ibm.com |
||
|
Jordan Niethe
|
4bc8ff6f17 |
KVM: PPC: Book3S HV nestedv2: Do not call H_COPY_TOFROM_GUEST
H_COPY_TOFROM_GUEST is part of the nestedv1 API and so should not be called by a nestedv2 host. Do not attempt to call it. Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231201132618.555031-10-vaibhav@linux.ibm.com |
||
|
Jordan Niethe
|
a9a3de530d |
KVM: PPC: Book3S HV nestedv2: Avoid msr check in kvmppc_handle_exit_hv()
The msr check in kvmppc_handle_exit_hv() is not needed for nestedv2 hosts, skip the check to avoid a H_GUEST_GET_STATE hcall. Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231201132618.555031-9-vaibhav@linux.ibm.com |
||
|
Jordan Niethe
|
df938a5576 |
KVM: PPC: Book3S HV nestedv2: Do not inject certain interrupts
There is no need to inject an external interrupt in kvmppc_book3s_irqprio_deliver() as the test for BOOK3S_IRQPRIO_EXTERNAL in kvmhv_run_single_vcpu() before guest entry will raise LPCR_MER if needed. There is also no need to inject the decrementer interrupt as this will be raised within the L2 if needed. Avoiding these injections reduces H_GUEST_GET_STATE hcalls by the L1. Suggested-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231201132618.555031-8-vaibhav@linux.ibm.com |
||
|
Nicholas Piggin
|
ecd10702ba |
KVM: PPC: Book3S HV: Handle pending exceptions on guest entry with MSR_EE
Commit |
||
|
Jordan Niethe
|
ec0f6639fa |
KVM: PPC: Book3S HV nestedv2: Ensure LPCR_MER bit is passed to the L0
LPCR_MER is conditionally set during entry to a guest if there is a pending external interrupt. In the nestedv2 case, this change is not being communicated to the L0, which means it is not being set in the L2. Ensure the updated LPCR value is passed to the L0. Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231201132618.555031-6-vaibhav@linux.ibm.com |
||
|
Jordan Niethe
|
e678748a8d |
KVM: PPC: Book3S HV nestedv2: Get the PID only if needed to copy tofrom a guest
kvmhv_copy_tofrom_guest_radix() gets the PID at the start of the function. If pid is not used, then this is a wasteful H_GUEST_GET_STATE hcall for nestedv2 hosts. Move the assignment to where pid will be used. Suggested-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231201132618.555031-5-vaibhav@linux.ibm.com |
||
|
Jordan Niethe
|
63ccae78cd |
KVM: PPC: Book3S HV nestedv2: Do not check msr on hcalls
The check for a hcall coming from userspace is done for KVM-PR. This is not supported for nestedv2 and the L0 will directly inject the necessary exception to the L2 if userspace performs a hcall. Avoid checking the MSR and thus avoid a H_GUEST_GET_STATE hcall in the L1. Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231201132618.555031-4-vaibhav@linux.ibm.com |
||
|
Jordan Niethe
|
e0d4acbcba |
KVM: PPC: Book3S HV nestedv2: Avoid reloading the tb offset
The kvmppc_get_tb_offset() getter reloads KVMPPC_GSID_TB_OFFSET from the
L0 for nestedv2 host. This is unnecessary as the value does not change.
KVMPPC_GSID_TB_OFFSET also need not be reloaded in
kvmppc_{s,g}et_dec_expires().
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201132618.555031-3-vaibhav@linux.ibm.com
|
||
|
Jordan Niethe
|
7d370e1812 |
KVM: PPC: Book3S HV nestedv2: Invalidate RPT before deleting a guest
An L0 must invalidate the L2's RPT during H_GUEST_DELETE if this has not already been done. This is a slow operation that means H_GUEST_DELETE must return H_BUSY multiple times before completing. Invalidating the tables before deleting the guest so there is less work for the L0 to do. Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231201132618.555031-2-vaibhav@linux.ibm.com |
||
|
Naveen N Rao
|
4b3338aaa7 |
powerpc/ftrace: Fix stack teardown in ftrace_no_trace
Commit |
||
Ilpo Järvinen
|
3773343dd8 |
powerpc/fsl-pci: Use PCI_HEADER_TYPE_MASK instead of literal
Replace 0x7f literals with PCI_HEADER_TYPE_MASK. Link: https://lore.kernel.org/r/20231124090919.23687-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Nathan Lynch
|
27951e1d82 |
powerpc/pseries/memhp: Log more error conditions in add path
When an add operation for multiple LMBs fails, there is currently little indication from the kernel of what went wrong. Be a little more verbose about error conditions in the add paths. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231114-pseries-memhp-fixes-v1-3-fb8f2bb7c557@linux.ibm.com |
||
|
Nathan Lynch
|
bd68ffce69 |
powerpc/pseries/memhp: Fix access beyond end of drmem array
dlpar_memory_remove_by_index() may access beyond the bounds of the
drmem lmb array when the LMB lookup fails to match an entry with the
given DRC index. When the search fails, the cursor is left pointing to
&drmem_info->lmbs[drmem_info->n_lmbs], which is one element past the
last valid entry in the array. The debug message at the end of the
function then dereferences this pointer:
pr_debug("Failed to hot-remove memory at %llx\n",
lmb->base_addr);
This was found by inspection and confirmed with KASAN:
pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 1234
==================================================================
BUG: KASAN: slab-out-of-bounds in dlpar_memory+0x298/0x1658
Read of size 8 at addr c000000364e97fd0 by task bash/949
dump_stack_lvl+0xa4/0xfc (unreliable)
print_report+0x214/0x63c
kasan_report+0x140/0x2e0
__asan_load8+0xa8/0xe0
dlpar_memory+0x298/0x1658
handle_dlpar_errorlog+0x130/0x1d0
dlpar_store+0x18c/0x3e0
kobj_attr_store+0x68/0xa0
sysfs_kf_write+0xc4/0x110
kernfs_fop_write_iter+0x26c/0x390
vfs_write+0x2d4/0x4e0
ksys_write+0xac/0x1a0
system_call_exception+0x268/0x530
system_call_vectored_common+0x15c/0x2ec
Allocated by task 1:
kasan_save_stack+0x48/0x80
kasan_set_track+0x34/0x50
kasan_save_alloc_info+0x34/0x50
__kasan_kmalloc+0xd0/0x120
__kmalloc+0x8c/0x320
kmalloc_array.constprop.0+0x48/0x5c
drmem_init+0x2a0/0x41c
do_one_initcall+0xe0/0x5c0
kernel_init_freeable+0x4ec/0x5a0
kernel_init+0x30/0x1e0
ret_from_kernel_user_thread+0x14/0x1c
The buggy address belongs to the object at c000000364e80000
which belongs to the cache kmalloc-128k of size 131072
The buggy address is located 0 bytes to the right of
allocated 98256-byte region [c000000364e80000, c000000364e97fd0)
==================================================================
pseries-hotplug-mem: Failed to hot-remove memory at 0
Log failed lookups with a separate message and dereference the
cursor only when it points to a valid entry.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes:
|
||
|
Randy Dunlap
|
4a74197b65 |
powerpc/44x: select I2C for CURRITUCK
Fix build errors when CURRITUCK=y and I2C is not builtin (=m or is
not set). Fixes these build errors:
powerpc-linux-ld: arch/powerpc/platforms/44x/ppc476.o: in function `avr_halt_system':
ppc476.c:(.text+0x58): undefined reference to `i2c_smbus_write_byte_data'
powerpc-linux-ld: arch/powerpc/platforms/44x/ppc476.o: in function `ppc47x_device_probe':
ppc476.c:(.init.text+0x18): undefined reference to `i2c_register_driver'
Fixes:
|
||
Dario Binacchi
|
a9e1e4d6e8 |
powerpc/85xx: Fix typo in code comment
s/singals/signals/ Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231124100241.660374-1-dario.binacchi@amarulasolutions.com |
||
Zhao Ke
|
e12d8e2602 |
powerpc: Add PVN support for HeXin C2000 processor
HeXin Tech Co. has applied for a new PVN from the OpenPower Community for its new processor C2000. The OpenPower has assigned a new PVN and this newly assigned PVN is 0x0066, add pvr register related support for this PVN. Signed-off-by: Zhao Ke <ke.zhao@shingroup.cn> Link: https://discuss.openpower.foundation/t/how-to-get-a-new-pvr-for-processors-follow-power-isa/477/10 Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231129075845.57976-1-ke.zhao@shingroup.cn |
||
|
Michael Ellerman
|
f8d3555355 |
powerpc: Fix build error due to is_valid_bugaddr()
With CONFIG_GENERIC_BUG=n the build fails with:
arch/powerpc/kernel/traps.c:1442:5: error: no previous prototype for ‘is_valid_bugaddr’ [-Werror=missing-prototypes]
1442 | int is_valid_bugaddr(unsigned long addr)
| ^~~~~~~~~~~~~~~~
The prototype is only defined, and the function is only needed, when
CONFIG_GENERIC_BUG=y, so move the implementation under that.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231130114433.3053544-2-mpe@ellerman.id.au
|
||
|
Michael Ellerman
|
d8c3f243d4 |
powerpc/mm: Fix build failures due to arch_reserved_kernel_pages()
With NUMA=n and FA_DUMP=y or PRESERVE_FA_DUMP=y the build fails with:
arch/powerpc/kernel/fadump.c:1739:22: error: no previous prototype for ‘arch_reserved_kernel_pages’ [-Werror=missing-prototypes]
1739 | unsigned long __init arch_reserved_kernel_pages(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
The prototype for arch_reserved_kernel_pages() is in include/linux/mm.h,
but it's guarded by __HAVE_ARCH_RESERVED_KERNEL_PAGES. The powerpc
headers define __HAVE_ARCH_RESERVED_KERNEL_PAGES in asm/mmzone.h, which
is not included into the generic headers when NUMA=n.
Move the definition of __HAVE_ARCH_RESERVED_KERNEL_PAGES into asm/mmu.h
which is included regardless of NUMA=n.
Additionally the ifdef around __HAVE_ARCH_RESERVED_KERNEL_PAGES needs to
also check for CONFIG_PRESERVE_FA_DUMP.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231130114433.3053544-1-mpe@ellerman.id.au
|
||
Gustavo A. R. Silva
|
aaa03fdb56 |
crypto: p10-aes-gcm - Avoid -Wstringop-overflow warnings
The compiler doesn't know that `32` is an offset into the Hash table:
56 struct Hash_ctx {
57 u8 H[16]; /* subkey */
58 u8 Htable[256]; /* Xi, Hash table(offset 32) */
59 };
So, it legitimately complains about a potential out-of-bounds issue
if `256 bytes` are accessed in `htable` (this implies going
`32 bytes` beyond the boundaries of `Htable`):
arch/powerpc/crypto/aes-gcm-p10-glue.c: In function 'gcmp10_init':
arch/powerpc/crypto/aes-gcm-p10-glue.c:120:9: error: 'gcm_init_htable' accessing 256 bytes in a region of size 224 [-Werror=stringop-overflow=]
120 | gcm_init_htable(hash->Htable+32, hash->H);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/crypto/aes-gcm-p10-glue.c:120:9: note: referencing argument 1 of type 'unsigned char[256]'
arch/powerpc/crypto/aes-gcm-p10-glue.c:120:9: note: referencing argument 2 of type 'unsigned char[16]'
arch/powerpc/crypto/aes-gcm-p10-glue.c:40:17: note: in a call to function 'gcm_init_htable'
40 | asmlinkage void gcm_init_htable(unsigned char htable[256], unsigned char Xi[16]);
| ^~~~~~~~~~~~~~~
Address this by avoiding specifying the size of `htable` in the function
prototype; and just for consistency, do the same for parameter `Xi`.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20231121131903.68a37932@canb.auug.org.au/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
||
Wei Wang
|
63912245c1 |
KVM: move KVM_CAP_DEVICE_CTRL to the generic check
KVM_CAP_DEVICE_CTRL allows userspace to check if the kvm_device framework (e.g. KVM_CREATE_DEVICE) is supported by KVM. Move KVM_CAP_DEVICE_CTRL to the generic check for the two reasons: 1) it already supports arch agnostic usages (i.e. KVM_DEV_TYPE_VFIO). For example, userspace VFIO implementation may needs to create KVM_DEV_TYPE_VFIO on x86, riscv, or arm etc. It is simpler to have it checked at the generic code than at each arch's code. 2) KVM_CREATE_DEVICE has been added to the generic code. Link: https://lore.kernel.org/all/20221215115207.14784-1-wei.w.wang@intel.com Signed-off-by: Wei Wang <wei.w.wang@intel.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Acked-by: Anup Patel <anup@brainfault.org> (riscv) Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://lore.kernel.org/r/20230315101606.10636-1-wei.w.wang@intel.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Michael Ellerman
|
ede66cd224 |
powerpc/64s: Fix CONFIG_NUMA=n build due to create_section_mapping()
With CONFIG_NUMA=n the build fails with:
arch/powerpc/mm/book3s64/pgtable.c:275:15: error: no previous prototype for ‘create_section_mapping’ [-Werror=missing-prototypes]
275 | int __meminit create_section_mapping(unsigned long start, unsigned long end,
| ^~~~~~~~~~~~~~~~~~~~~~
That happens because the prototype for create_section_mapping() is in
asm/mmzone.h, but asm/mmzone.h is only included by linux/mmzone.h
when CONFIG_NUMA=y.
In fact the prototype is only needed by arch/powerpc/mm code, so move
the prototype into arch/powerpc/mm/mmu_decl.h, which also fixes the
build error.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231129131919.2528517-5-mpe@ellerman.id.au
|
||
|
Michael Ellerman
|
b90ad50171 |
powerpc/44x: Make ppc44x_idle_init() static
The 44x/fsp2_defconfig build fails with:
arch/powerpc/platforms/44x/idle.c:30:12: error: no previous prototype for ‘ppc44x_idle_init’ [-Werror=missing-prototypes]
30 | int __init ppc44x_idle_init(void)
| ^~~~~~~~~~~~~~~~
Fix it by making ppc44x_idle_init() static.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231129131919.2528517-4-mpe@ellerman.id.au
|
||
|
Michael Ellerman
|
10feb8f961 |
powerpc/512x: Fix missing prototype warnings
The mpc512x_defconfig build fails with:
arch/powerpc/platforms/512x/mpc5121_ads_cpld.c:142:1: error: no previous prototype for ‘mpc5121_ads_cpld_map’ [-Werror=missing-prototypes]
142 | mpc5121_ads_cpld_map(void)
| ^~~~~~~~~~~~~~~~~~~~
arch/powerpc/platforms/512x/mpc5121_ads_cpld.c:157:1: error: no previous prototype for ‘mpc5121_ads_cpld_pic_init’ [-Werror=missing-prototypes]
157 | mpc5121_ads_cpld_pic_init(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
There are prototypes for these functions but the header they are in is
not included by mpc5121_ads_cpld.c. Include it to fix the build error.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231129131919.2528517-3-mpe@ellerman.id.au
|
||
|
Michael Ellerman
|
24afc61990 |
powerpc/512x: Make pdm360ng_init() static
The mpc512x_defconfig config fails with:
arch/powerpc/platforms/512x/pdm360ng.c:104:13: error: no previous prototype for ‘pdm360ng_init’ [-Werror=missing-prototypes]
104 | void __init pdm360ng_init(void)
| ^~~~~~~~~~~~~
Fix it by making pdm360ng_init() static.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231129131919.2528517-2-mpe@ellerman.id.au
|
||
|
Michael Ellerman
|
360f051d82 |
powerpc/suspend: Add prototype for do_after_copyback()
With HIBERNATION=y the build breaks with:
arch/powerpc/kernel/swsusp_64.c:14:6: error: no previous prototype for ‘do_after_copyback’ [-Werror=missing-prototypes]
14 | void do_after_copyback(void)
| ^~~~~~~~~~~~~~~~~
do_after_copyback() is only called from asm, so there is no prototype,
nor any header where it makes sense to place one. Just add a prototype
in the C file to fix the build error.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231129131919.2528517-1-mpe@ellerman.id.au
|
||
|
Nicholas Piggin
|
dc158d23b3 |
KVM: PPC: Book3S HV: Fix KVM_RUN clobbering FP/VEC user registers
Before running a guest, the host process (e.g., QEMU) FP/VEC registers
are saved if they were being used, similarly to when the kernel uses FP
registers. The guest values are then loaded into regs, and the host
process registers will be restored lazily when it uses FP/VEC.
KVM HV has a bug here: the host process registers do get saved, but the
user MSR bits remain enabled, which indicates the registers are valid
for the process. After they are clobbered by running the guest, this
valid indication causes the host process to take on the FP/VEC register
values of the guest.
Fixes:
|
||
|
Arnd Bergmann
|
0734f5c7eb |
Merge branch 'asm-generic-prototypes' into asm-generic
As part of my quest to enable -Wmissing-prototypes by default, these patches clean up some of the prototypes that are needed by all architectures but are handled inconsistently. The duplicate prototypes are moved into common code, which helps both to clean up the existing warnings and simplifies the logic. * asm-generic-prototypes: arm64: vdso32: Define BUILD_VDSO32_64 to correct prototypes csky: fix arch_jump_label_transform_static override arch: add do_page_fault prototypes arch: add missing prepare_ftrace_return() prototypes arch: vdso: consolidate gettime prototypes arch: include linux/cpu.h for trap_init() prototype arch: fix asm-offsets.c building with -Wmissing-prototypes arch: consolidate arch_irq_work_raise prototypes |
||
Timothy Pearson
|
5e1d824f9a |
powerpc: Don't clobber f0/vs0 during fp|altivec register save
During floating point and vector save to thread data f0/vs0 are
clobbered by the FPSCR/VSCR store routine. This has been obvserved to
lead to userspace register corruption and application data corruption
with io-uring.
Fix it by restoring f0/vs0 after FPSCR/VSCR store has completed for
all the FP, altivec, VMX register save paths.
Tested under QEMU in kvm mode, running on a Talos II workstation with
dual POWER9 DD2.2 CPUs.
Additional detail (mpe):
Typically save_fpu() is called from __giveup_fpu() which saves the FP
regs and also *turns off FP* in the tasks MSR, meaning the kernel will
reload the FP regs from the thread struct before letting the task use FP
again. So in that case save_fpu() is free to clobber f0 because the FP
regs no longer hold live values for the task.
There is another case though, which is the path via:
sys_clone()
...
copy_process()
dup_task_struct()
arch_dup_task_struct()
flush_all_to_thread()
save_all()
That path saves the FP regs but leaves them live. That's meant as an
optimisation for a process that's using FP/VSX and then calls fork(),
leaving the regs live means the parent process doesn't have to take a
fault after the fork to get its FP regs back. The optimisation was added
in commit
|
||
|
Nathan Lynch
|
9be4feb768 |
powerpc/rtas_pci: rename and properly expose config access APIs
The rtas_read_config() and rtas_write_config() functions in
kernel/rtas_pci.c have external linkage and two users in arch/powerpc:
the rtas_pci code itself and the pseries platform's "enhanced error
handling" (EEH) support code.
The prototypes for these functions in asm/ppc-pci.h have until now
been guarded by CONFIG_EEH since the only external caller is the
pseries EEH code. However, this presumably has always generated
warnings when built with !CONFIG_EEH and -Wmissing-prototypes:
arch/powerpc/kernel/rtas_pci.c:46:5: error: no previous prototype for
function 'rtas_read_config' [-Werror,-Wmissing-prototypes]
46 | int rtas_read_config(struct pci_dn *pdn, int where,
int size, u32 *val)
arch/powerpc/kernel/rtas_pci.c:98:5: error: no previous prototype for
function 'rtas_write_config' [-Werror,-Wmissing-prototypes]
98 | int rtas_write_config(struct pci_dn *pdn, int where,
int size, u32 val)
The introduction of commit c6345dfa6e3e ("Makefile.extrawarn: turn on
missing-prototypes globally") forces the issue.
The efika and chrp platform code have (static) functions with the same
names but different signatures. We may as well eliminate the potential
for conflicts and confusion by renaming the globally visible versions
as their prototypes get moved out of the CONFIG_EEH-guarded region;
their current names are too generic anyway. Since they operate on
objects of the type 'struct pci_dn *', give them the slightly more
verbose prefix "rtas_pci_dn_" and fix up all the call sites.
Fixes: c6345dfa6e3e ("Makefile.extrawarn: turn on missing-prototypes globally")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/linuxppc-dev/CA+G9fYt0LLXtjSz+Hkf3Fhm-kf0ZQanrhUS+zVZGa3O+Wt2+vg@mail.gmail.com/
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231127-rtas-pci-rw-config-v1-1-385d29ace3df@linux.ibm.com
|
||
|
Stephen Rothwell
|
0d555b57ee |
powerpc: pmd_move_must_withdraw() is only needed for CONFIG_TRANSPARENT_HUGEPAGE
The linux-next build of powerpc64 allnoconfig fails with:
arch/powerpc/mm/book3s64/pgtable.c:557:5: error: no previous prototype for 'pmd_move_must_withdraw'
557 | int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl,
| ^~~~~~~~~~~~~~~~~~~~~~
Caused by commit:
c6345dfa6e3e ("Makefile.extrawarn: turn on missing-prototypes globally")
Fix it by moving the function definition under
CONFIG_TRANSPARENT_HUGEPAGE like the prototype. The function is only
called when CONFIG_TRANSPARENT_HUGEPAGE=y.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
[mpe: Flesh out change log from linux-next patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231127132809.45c2b398@canb.auug.org.au
|
||
|
Naveen N Rao
|
8f9abaa6d7 |
powerpc/lib: Validate size for vector operations
Some of the fp/vmx code in sstep.c assume a certain maximum size for the instructions being emulated. The size of those operations however is determined separately in analyse_instr(). Add a check to validate the assumption on the maximum size of the operations, so as to prevent any unintended kernel stack corruption. Signed-off-by: Naveen N Rao <naveen@kernel.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Build-tested-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231123071705.397625-1-naveen@kernel.org |
||
|
Michael Ellerman
|
df99da19c6 |
powerpc/lib: Avoid array bounds warnings in vec ops
Building with GCC with -Warray-bounds enabled there are several warnings
in sstep.c along the lines of:
In function ‘do_byte_reverse’,
inlined from ‘do_vec_load’ at arch/powerpc/lib/sstep.c:691:3,
inlined from ‘emulate_loadstore’ at arch/powerpc/lib/sstep.c:3439:9:
arch/powerpc/lib/sstep.c:289:23: error: array subscript 2 is outside array bounds of ‘u8[16]’ {aka ‘unsigned char[16]’} [-Werror=array-bounds=]
289 | up[2] = byterev_8(up[1]);
| ~~~~~~^~~~~~~~~~~~~~~~~~
arch/powerpc/lib/sstep.c: In function ‘emulate_loadstore’:
arch/powerpc/lib/sstep.c:681:11: note: at offset 16 into object ‘u’ of size 16
681 | } u = {};
| ^
do_byte_reverse() supports a size up to 32 bytes, but in these cases the
caller is only passing a 16 byte buffer. In practice there is no bug,
do_vec_load() is only called from the LOAD_VMX case in emulate_loadstore().
That in turn is only reached when analyse_instr() recognises VMX ops,
and in all cases the size is no greater than 16:
$ git grep -w LOAD_VMX arch/powerpc/lib/sstep.c
arch/powerpc/lib/sstep.c: op->type = MKOP(LOAD_VMX, 0, 1);
arch/powerpc/lib/sstep.c: op->type = MKOP(LOAD_VMX, 0, 2);
arch/powerpc/lib/sstep.c: op->type = MKOP(LOAD_VMX, 0, 4);
arch/powerpc/lib/sstep.c: op->type = MKOP(LOAD_VMX, 0, 16);
Similarly for do_vec_store().
Although the warning is incorrect, the code would be safer if it clamped
the size from the caller to the known size of the buffer. Do that using
min_t().
Reported-by: Bagas Sanjaya <bagasdotme@gmail.com>
Closes: https://lore.kernel.org/linuxppc-dev/YpbUcPrm61RLIiZF@debian.me/
Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Closes: https://lore.kernel.org/linuxppc-dev/20221212215117.aa7255t7qd6yefk4@lug-owl.de/
Reported-by: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Closes: https://lore.kernel.org/linuxppc-dev/6a8bf78c-aedb-4d5a-b0aa-82a51a17b884@embeddedor.com/
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Build-tested-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231120235436.1569255-1-mpe@ellerman.id.au
|
||
|
Kunwu Chan
|
45b1ba7e5d |
powerpc/xics: Check return value of kasprintf in icp_native_map_one_cpu
kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity. Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231122030651.3818-1-chentao@kylinos.cn |
||
|
Masahiro Yamada
|
1b1e380026 |
powerpc: add crtsavres.o to always-y instead of extra-y
crtsavres.o is linked to modules. However, as explained in commit |
||
|
Michael Ellerman
|
c8a1634145 |
powerpc/32: Drop unused grackle_set_stg()
The call to grackle_set_stg() ("Store Gathering") has always been inside
an #ifdef 0, since the code was first merged in v2.3.43pre7.
Apparently it was suspected of causing problems on some hardware so was
disabled. No one has ever proved otherwise so drop the code as unused
for now.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Closes: https://lore.kernel.org/all/20231031145600.GA9161@bhelgaas/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231113051929.1952351-1-mpe@ellerman.id.au
|
||
|
Michael Ellerman
|
6f2a9e0e0a |
powerpc: Remove orphaned reg_a2.h
Commit
|
||
|
Michael Ellerman
|
98eb30fe4c |
powerpc: Make cpu_spec __ro_after_init
The cpu_spec is a struct holding various information about the CPU the kernel is executing on. It's populated early in boot and must not change after that. In particular the cpu_features and mmu_features hold the set of discovered CPU/MMU features and are used to set static keys for each feature, and do binary patching of assembly. So any change to the cpu_features/mmu_features later in boot will not be reflected in the state of the static keys or patched code. There is already logic to check that cpu_features/mmu_features don't change, see check_features() in feature-fixups.c. But as another layer of protection the entire cpu_spec should be read only after init, annotate it as such. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231025012452.1985680-1-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
183bc0c640 |
powerpc/configs/64s: Enable CONFIG_MEM_SOFT_DIRTY
Enable CONFIG_MEM_SOFT_DIRTY to get some test coverage. Distros enable
it, and it has been broken previously. See commit
|
||
Al Viro
|
da549bdd15 |
dentry: switch the lists of children to hlist
Saves a pointer per struct dentry and actually makes the things less clumsy. Cleaned the d_walk() and dcache_readdir() a bit by use of hlist_for_... iterators. A couple of new helpers - d_first_child() and d_next_sibling(), to make the expressions less awful. Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Arnd Bergmann
|
64bac5ea17 |
arch: consolidate arch_irq_work_raise prototypes
The prototype was hidden in an #ifdef on x86, which causes a warning: kernel/irq_work.c:72:13: error: no previous prototype for 'arch_irq_work_raise' [-Werror=missing-prototypes] Some architectures have a working prototype, while others don't. Fix this by providing it in only one place that is always visible. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Acked-by: Guo Ren <guoren@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Kefeng Wang
|
3cd944590d |
asm/io: remove unnecessary xlate_dev_mem_ptr() and unxlate_dev_mem_ptr()
The asm-generic/io.h already has default definition, remove unnecessary arch's defination. Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <linux@armlinux.org.uk> Cc: Brian Cain <bcain@quicinc.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stanislav Kinsburskii <stanislav.kinsburskii@gmail.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Baoquan He
|
026246f114 |
arch/*/io.h: remove ioremap_uc in some architectures
ioremap_uc() is only meaningful on old x86-32 systems with the PAT extension, and on ia64 with its slightly unconventional ioremap() behavior. So remove the ioremap_uc() definition in architecutures other than x86 and ia64. These architectures all have asm-generic/io.h included and will have the default ioremap_uc() definition which returns NULL. This changes the existing behaviour, while no need to worry about any breakage because in the only callsite of ioremap_uc(), code has been adjusted to eliminate the impact. Please see atyfb_setup_generic() of drivers/video/fbdev/aty/atyfb_base.c. If any new invocation of ioremap_uc() need be added, please consider using ioremap() intead or adding a ARCH specific version if necessary. Signed-off-by: Baoquan He <bhe@redhat.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Helge Deller <deller@gmx.de> # parisc Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> (SuperH) Cc: linux-alpha@vger.kernel.org Cc: linux-hexagon@vger.kernel.org Cc: linux-m68k@lists.linux-m68k.org Cc: linux-mips@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-sh@vger.kernel.org Cc: sparclinux@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Nathan Lynch
|
646477fc47 |
powerpc/rtas: Remove 'extern' from function declarations in rtas.h
This header occasionally gains new function declarations without the leading extern in accordance with current style rules. Leaving the legacy externs in place is making the header more difficult to read over time because of the inconsistency. Remove them. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> [mpe: Add names to rtas_call() parameters] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231106-rtas-trivial-v1-7-61847655c51f@linux.ibm.com |
||
|
Nathan Lynch
|
19773eda86 |
powerpc/rtas: Remove trailing space
Use scripts/cleanfile to remove instances of trailing space in the core RTAS code and header. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231106-rtas-trivial-v1-6-61847655c51f@linux.ibm.com |
||
|
Nathan Lynch
|
010862d235 |
powerpc/rtas: Move post_mobility_fixup() declaration to pseries
This is a pseries-specific function declaration that doesn't belong in rtas.h. Move it to the pseries platform code and adjust pseries/suspend.c accordingly. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231106-rtas-trivial-v1-5-61847655c51f@linux.ibm.com |
||
|
Nathan Lynch
|
1d8faf1f41 |
powerpc/rtas: Remove unused rtas_service_present()
rtas_service_present() has no more users. rtas_function_implemented() is now the appropriate API for determining whether a given RTAS function is available to call. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231106-rtas-trivial-v1-4-61847655c51f@linux.ibm.com |
||
|
Nathan Lynch
|
981d1c997f |
powerpc/rtas: Drop declaration of undefined call_rtas() function
The call_rtas() function has never been a part of arch/powerpc, and
its implementation was removed from arch/ppc by
|
||
|
Arnd Bergmann
|
afb36ac386 |
powerpc/powermac: mark smp_psurge_{give,take}_timebase static
These functions are only called locally and should be static like the
other corresponding functions are:
arch/powerpc/platforms/powermac/smp.c:416:13: error: no previous prototype for 'smp_psurge_take_timebase' [-Werror=missing-prototypes]
416 | void __init smp_psurge_take_timebase(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/platforms/powermac/smp.c:432:13: error: no previous prototype for 'smp_psurge_give_timebase' [-Werror=missing-prototypes]
432 | void __init smp_psurge_give_timebase(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231108125843.3806765-20-arnd@kernel.org
|
||
|
Arnd Bergmann
|
0c9a768de6 |
powerpc/pasemi: mark pas_shutdown() static
Allmodconfig builds show a warning about one function that is accidentally
marked global:
arch/powerpc/platforms/pasemi/setup.c:67:6: error: no previous prototype for 'pas_shutdown' [-Werror=missing-prototypes]
Fixes:
|
||
|
Arnd Bergmann
|
04c40eed3f |
powerpc/ps3: move udbg_shutdown_ps3gelic prototype
Allmodconfig kernels produce a missing-prototypes warning: arch/powerpc/platforms/ps3/gelic_udbg.c:239:6: error: no previous prototype for 'udbg_shutdown_ps3gelic' [-Werror=missing-prototypes] Move the declaration from a local header to asm/ps3.h where it can be seen from both the caller and the definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Geoff Levand <geoff@infradead.org> Acked-by: Jakub Kicinski <kuba@kernel.org> [mpe: Drop CONFIG_PS3GELIC_UDBG to fix build error] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231108125843.3806765-18-arnd@kernel.org |
||
Peter Zijlstra
|
5d2d4a9f60 |
Merge branch 'tip/perf/urgent'
Avoid conflicts, base on fixes. Signed-off-by: Peter Zijlstra <peterz@infradead.org> |
||
|
Paolo Bonzini
|
6c370dc653 |
Merge branch 'kvm-guestmemfd' into HEAD
Introduce several new KVM uAPIs to ultimately create a guest-first memory
subsystem within KVM, a.k.a. guest_memfd. Guest-first memory allows KVM
to provide features, enhancements, and optimizations that are kludgly
or outright impossible to implement in a generic memory subsystem.
The core KVM ioctl() for guest_memfd is KVM_CREATE_GUEST_MEMFD, which
similar to the generic memfd_create(), creates an anonymous file and
returns a file descriptor that refers to it. Again like "regular"
memfd files, guest_memfd files live in RAM, have volatile storage,
and are automatically released when the last reference is dropped.
The key differences between memfd files (and every other memory subystem)
is that guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
convert a guest memory area between the shared and guest-private states.
A second KVM ioctl(), KVM_SET_MEMORY_ATTRIBUTES, allows userspace to
specify attributes for a given page of guest memory. In the long term,
it will likely be extended to allow userspace to specify per-gfn RWX
protections, including allowing memory to be writable in the guest
without it also being writable in host userspace.
The immediate and driving use case for guest_memfd are Confidential
(CoCo) VMs, specifically AMD's SEV-SNP, Intel's TDX, and KVM's own pKVM.
For such use cases, being able to map memory into KVM guests without
requiring said memory to be mapped into the host is a hard requirement.
While SEV+ and TDX prevent untrusted software from reading guest private
data by encrypting guest memory, pKVM provides confidentiality and
integrity *without* relying on memory encryption. In addition, with
SEV-SNP and especially TDX, accessing guest private memory can be fatal
to the host, i.e. KVM must be prevent host userspace from accessing
guest memory irrespective of hardware behavior.
Long term, guest_memfd may be useful for use cases beyond CoCo VMs,
for example hardening userspace against unintentional accesses to guest
memory. As mentioned earlier, KVM's ABI uses userspace VMA protections to
define the allow guest protection (with an exception granted to mapping
guest memory executable), and similarly KVM currently requires the guest
mapping size to be a strict subset of the host userspace mapping size.
Decoupling the mappings sizes would allow userspace to precisely map
only what is needed and with the required permissions, without impacting
guest performance.
A guest-first memory subsystem also provides clearer line of sight to
things like a dedicated memory pool (for slice-of-hardware VMs) and
elimination of "struct page" (for offload setups where userspace _never_
needs to DMA from or into guest memory).
guest_memfd is the result of 3+ years of development and exploration;
taking on memory management responsibilities in KVM was not the first,
second, or even third choice for supporting CoCo VMs. But after many
failed attempts to avoid KVM-specific backing memory, and looking at
where things ended up, it is quite clear that of all approaches tried,
guest_memfd is the simplest, most robust, and most extensible, and the
right thing to do for KVM and the kernel at-large.
The "development cycle" for this version is going to be very short;
ideally, next week I will merge it as is in kvm/next, taking this through
the KVM tree for 6.8 immediately after the end of the merge window.
The series is still based on 6.6 (plus KVM changes for 6.7) so it
will require a small fixup for changes to get_file_rcu() introduced in
6.7 by commit
|
||
Sean Christopherson
|
eed52e434b |
KVM: Allow arch code to track number of memslot address spaces per VM
Let x86 track the number of address spaces on a per-VM basis so that KVM can disallow SMM memslots for confidential VMs. Confidentials VMs are fundamentally incompatible with emulating SMM, which as the name suggests requires being able to read and write guest memory and register state. Disallowing SMM will simplify support for guest private memory, as KVM will not need to worry about tracking memory attributes for multiple address spaces (SMM is the only "non-default" address space across all architectures). Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fuad Tabba <tabba@google.com> Tested-by: Fuad Tabba <tabba@google.com> Message-Id: <20231027182217.3615211-23-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
f128cf8cfb |
KVM: Convert KVM_ARCH_WANT_MMU_NOTIFIER to CONFIG_KVM_GENERIC_MMU_NOTIFIER
Convert KVM_ARCH_WANT_MMU_NOTIFIER into a Kconfig and select it where appropriate to effectively maintain existing behavior. Using a proper Kconfig will simplify building more functionality on top of KVM's mmu_notifier infrastructure. Add a forward declaration of kvm_gfn_range to kvm_types.h so that including arch/powerpc/include/asm/kvm_ppc.h's with CONFIG_KVM=n doesn't generate warnings due to kvm_gfn_range being undeclared. PPC defines hooks for PR vs. HV without guarding them via #ifdeffery, e.g. bool (*unmap_gfn_range)(struct kvm *kvm, struct kvm_gfn_range *range); bool (*age_gfn)(struct kvm *kvm, struct kvm_gfn_range *range); bool (*test_age_gfn)(struct kvm *kvm, struct kvm_gfn_range *range); bool (*set_spte_gfn)(struct kvm *kvm, struct kvm_gfn_range *range); Alternatively, PPC could forward declare kvm_gfn_range, but there's no good reason not to define it in common KVM. Acked-by: Anup Patel <anup@brainfault.org> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fuad Tabba <tabba@google.com> Tested-by: Fuad Tabba <tabba@google.com> Message-Id: <20231027182217.3615211-8-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
4a2e993faa |
KVM: PPC: Return '1' unconditionally for KVM_CAP_SYNC_MMU
Advertise that KVM's MMU is synchronized with the primary MMU for all flavors of PPC KVM support, i.e. advertise that the MMU is synchronized when CONFIG_KVM_BOOK3S_HV_POSSIBLE=y but the VM is not using hypervisor mode (a.k.a. PR VMs). PR VMs, via kvm_unmap_gfn_range_pr(), do the right thing for mmu_notifier invalidation events, and more tellingly, KVM returns '1' for KVM_CAP_SYNC_MMU when CONFIG_KVM_BOOK3S_HV_POSSIBLE=n and CONFIG_KVM_BOOK3S_PR_POSSIBLE=y, i.e. KVM already advertises a synchronized MMU for PR VMs, just not when CONFIG_KVM_BOOK3S_HV_POSSIBLE=y. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20231027182217.3615211-7-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
1853d7502a |
KVM: PPC: Drop dead code related to KVM_ARCH_WANT_MMU_NOTIFIER
Assert that both KVM_ARCH_WANT_MMU_NOTIFIER and CONFIG_MMU_NOTIFIER are defined when KVM is enabled, and return '1' unconditionally for the CONFIG_KVM_BOOK3S_HV_POSSIBLE=n path. All flavors of PPC support for KVM select MMU_NOTIFIER, and KVM_ARCH_WANT_MMU_NOTIFIER is unconditionally defined by arch/powerpc/include/asm/kvm_host.h. Effectively dropping use of KVM_ARCH_WANT_MMU_NOTIFIER will simplify a future cleanup to turn KVM_ARCH_WANT_MMU_NOTIFIER into a Kconfig, i.e. will allow combining all of the #if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER) checks into a single #ifdef CONFIG_KVM_GENERIC_MMU_NOTIFIER without having to worry about PPC's "bare" usage of KVM_ARCH_WANT_MMU_NOTIFIER. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fuad Tabba <tabba@google.com> Message-Id: <20231027182217.3615211-6-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
Casey Schaufler
|
5f42375904 |
LSM: wireup Linux Security Module syscalls
Wireup lsm_get_self_attr, lsm_set_self_attr and lsm_list_modules system calls. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-api@vger.kernel.org Reviewed-by: Mickaël Salaün <mic@digikod.net> [PM: forward ported beyond v6.6 due merge window changes] Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Linus Torvalds
|
5dd2020f33 |
powerpc fixes for 6.7 #2
- Finish a refactor of pgprot_framebuffer() which dependend on some changes
that were merged via the drm tree.
- Fix some kernel-doc warnings to quieten the bots.
Thanks to: Nathan Lynch, Thomas Zimmermann.
-----BEGIN PGP SIGNATURE-----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=Qaeg
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Finish a refactor of pgprot_framebuffer() which dependend
on some changes that were merged via the drm tree
- Fix some kernel-doc warnings to quieten the bots
Thanks to Nathan Lynch and Thomas Zimmermann.
* tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc
powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc
powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code
powerpc: Remove file parameter from phys_mem_access_prot()
powerpc/machdep: Remove trailing whitespaces
|
||
|
Arnd Bergmann
|
abc28463c8 |
kprobes: unify kprobes_exceptions_nofify() prototypes
Most architectures that support kprobes declare this function in their own asm/kprobes.h header and provide an override, but some are missing the prototype, which causes a warning for the __weak stub implementation: kernel/kprobes.c:1865:12: error: no previous prototype for 'kprobe_exceptions_notify' [-Werror=missing-prototypes] 1865 | int __weak kprobe_exceptions_notify(struct notifier_block *self, Move the prototype into linux/kprobes.h so it is visible to all the definitions. Link: https://lore.kernel.org/all/20231108125843.3806765-4-arnd@kernel.org/ Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> |
||
|
Linus Torvalds
|
4bbdb725a3 |
IOMMU Updates for Linux v6.7
Including:
- Core changes:
- Make default-domains mandatory for all IOMMU drivers
- Remove group refcounting
- Add generic_single_device_group() helper and consolidate
drivers
- Cleanup map/unmap ops
- Scaling improvements for the IOVA rcache depot
- Convert dart & iommufd to the new domain_alloc_paging()
- ARM-SMMU:
- Device-tree binding update:
- Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
- SMMUv2:
- Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
- SMMUv3:
- Large refactoring of the context descriptor code to
move the CD table into the master, paving the way
for '->set_dev_pasid()' support on non-SVA domains
- Minor cleanups to the SVA code
- Intel VT-d:
- Enable debugfs to dump domain attached to a pasid
- Remove an unnecessary inline function.
- AMD IOMMU:
- Initial patches for SVA support (not complete yet)
- S390 IOMMU:
- DMA-API conversion and optimized IOTLB flushing
- Some smaller fixes and improvements
-----BEGIN PGP SIGNATURE-----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=UyWC
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Make default-domains mandatory for all IOMMU drivers
- Remove group refcounting
- Add generic_single_device_group() helper and consolidate drivers
- Cleanup map/unmap ops
- Scaling improvements for the IOVA rcache depot
- Convert dart & iommufd to the new domain_alloc_paging()
ARM-SMMU:
- Device-tree binding update:
- Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
- SMMUv2:
- Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
- SMMUv3:
- Large refactoring of the context descriptor code to move the CD
table into the master, paving the way for '->set_dev_pasid()'
support on non-SVA domains
- Minor cleanups to the SVA code
Intel VT-d:
- Enable debugfs to dump domain attached to a pasid
- Remove an unnecessary inline function
AMD IOMMU:
- Initial patches for SVA support (not complete yet)
S390 IOMMU:
- DMA-API conversion and optimized IOTLB flushing
And some smaller fixes and improvements"
* tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (102 commits)
iommu/dart: Remove the force_bypass variable
iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging()
iommu/dart: Convert to domain_alloc_paging()
iommu/dart: Move the blocked domain support to a global static
iommu/dart: Use static global identity domains
iommufd: Convert to alloc_domain_paging()
iommu/vt-d: Use ops->blocked_domain
iommu/vt-d: Update the definition of the blocking domain
iommu: Move IOMMU_DOMAIN_BLOCKED global statics to ops->blocked_domain
Revert "iommu/vt-d: Remove unused function"
iommu/amd: Remove DMA_FQ type from domain allocation path
iommu: change iommu_map_sgtable to return signed values
iommu/virtio: Add __counted_by for struct viommu_request and use struct_size()
iommu/vt-d: debugfs: Support dumping a specified page table
iommu/vt-d: debugfs: Create/remove debugfs file per {device, pasid}
iommu/vt-d: debugfs: Dump entry pointing to huge page
iommu/vt-d: Remove unused function
iommu/arm-smmu-v3-sva: Remove bond refcount
iommu/arm-smmu-v3-sva: Remove unused iommu_sva handle
iommu/arm-smmu-v3: Rename cdcfg to cd_table
...
|
||
|
Nathan Lynch
|
644b6025bc |
powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc
>From a W=1 build: >> arch/powerpc/kernel/rtas-proc.c:771: warning: Function parameter or member 'm' not described in >> 'ppc_rtas_rmo_buf_show' >> arch/powerpc/kernel/rtas-proc.c:771: warning: Function parameter or member 'v' not described in >> 'ppc_rtas_rmo_buf_show' Add the missing parameter descriptions. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309211645.1Lvwmbv4-lkp@intel.com/ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231106-rtas-trivial-v1-2-61847655c51f@linux.ibm.com |
||
|
Nathan Lynch
|
65083333d3 |
powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc
>From a W=1 build: >> arch/powerpc/platforms/pseries/rtas-work-area.c:189: warning: Function parameter or member 'limit' not >> described in 'rtas_work_area_reserve_arena' Add the missing description of the limit parameter. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309131221.Bm1pg96n-lkp@intel.com/ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231106-rtas-trivial-v1-1-61847655c51f@linux.ibm.com |
||
|
Thomas Zimmermann
|
deebe5f607 |
powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code
Call __phys_mem_access_prot() from the fbdev mmap helper pgprot_framebuffer(). Allows to avoid the file argument of NULL. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230922080636.26762-6-tzimmermann@suse.de |
||
|
Thomas Zimmermann
|
1f92a844c3 |
powerpc: Remove file parameter from phys_mem_access_prot()
Remove 'file' parameter from struct machdep_calls.phys_mem_access_prot and its implementation in pci_phys_mem_access_prot(). The file is not used on PowerPC. By removing it, a later patch can simplify fbdev's mmap code, which uses phys_mem_access_prot() on PowerPC. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> [mpe: Rebase on unrelated changes to phys_mem_access_prot()] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230922080636.26762-5-tzimmermann@suse.de |
||
|
Thomas Zimmermann
|
322948c319 |
powerpc/machdep: Remove trailing whitespaces
Fix coding style. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230922080636.26762-4-tzimmermann@suse.de |
||
|
Linus Torvalds
|
5c5e048b24 |
Kbuild updates for v6.7
- Implement the binary search in modpost for faster symbol lookup
- Respect HOSTCC when linking host programs written in Rust
- Change the binrpm-pkg target to generate kernel-devel RPM package
- Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE
- Unify vdso_install rules
- Remove unused __memexit* annotations
- Eliminate stale whitelisting for __devinit/__devexit from modpost
- Enable dummy-tools to handle the -fpatchable-function-entry flag
- Add 'userldlibs' syntax
-----BEGIN PGP SIGNATURE-----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=PeX7
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Implement the binary search in modpost for faster symbol lookup
- Respect HOSTCC when linking host programs written in Rust
- Change the binrpm-pkg target to generate kernel-devel RPM package
- Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE
- Unify vdso_install rules
- Remove unused __memexit* annotations
- Eliminate stale whitelisting for __devinit/__devexit from modpost
- Enable dummy-tools to handle the -fpatchable-function-entry flag
- Add 'userldlibs' syntax
* tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kbuild: support 'userldlibs' syntax
kbuild: dummy-tools: pretend we understand -fpatchable-function-entry
kbuild: Correct missing architecture-specific hyphens
modpost: squash ALL_{INIT,EXIT}_TEXT_SECTIONS to ALL_TEXT_SECTIONS
modpost: merge sectioncheck table entries regarding init/exit sections
modpost: use ALL_INIT_SECTIONS for the section check from DATA_SECTIONS
modpost: disallow the combination of EXPORT_SYMBOL and __meminit*
modpost: remove EXIT_SECTIONS macro
modpost: remove MEM_INIT_SECTIONS macro
modpost: remove more symbol patterns from the section check whitelist
modpost: disallow *driver to reference .meminit* sections
linux/init: remove __memexit* annotations
modpost: remove ALL_EXIT_DATA_SECTIONS macro
kbuild: simplify cmd_ld_multi_m
kbuild: avoid too many execution of scripts/pahole-flags.sh
kbuild: remove ARCH_POSTLINK from module builds
kbuild: unify no-compiler-targets and no-sync-config-targets
kbuild: unify vdso_install rules
docs: kbuild: add INSTALL_DTBS_PATH
UML: remove unused cmd_vdso_install
...
|
||
|
Linus Torvalds
|
1f24458a10 |
TTY/Serial changes for 6.7-rc1
Here is the big set of tty/serial driver changes for 6.7-rc1. Included
in here are:
- console/vgacon cleanups and removals from Arnd
- tty core and n_tty cleanups from Jiri
- lots of 8250 driver updates and cleanups
- sc16is7xx serial driver updates
- dt binding updates
- first set of port lock wrapers from Thomas for the printk fixes
coming in future releases
- other small serial and tty core cleanups and updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUTbaw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk9+gCeKdoRb8FDwGCO/GaoHwR4EzwQXhQAoKXZRmN5
LTtw9sbfGIiBdOTtgLPb
=6PJr
-----END PGP SIGNATURE-----
Merge tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.7-rc1. Included
in here are:
- console/vgacon cleanups and removals from Arnd
- tty core and n_tty cleanups from Jiri
- lots of 8250 driver updates and cleanups
- sc16is7xx serial driver updates
- dt binding updates
- first set of port lock wrapers from Thomas for the printk fixes
coming in future releases
- other small serial and tty core cleanups and updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
serdev: Replace custom code with device_match_acpi_handle()
serdev: Simplify devm_serdev_device_open() function
serdev: Make use of device_set_node()
tty: n_gsm: add copyright Siemens Mobility GmbH
tty: n_gsm: fix race condition in status line change on dead connections
serial: core: Fix runtime PM handling for pending tx
vgacon: fix mips/sibyte build regression
dt-bindings: serial: drop unsupported samsung bindings
tty: serial: samsung: drop earlycon support for unsupported platforms
tty: 8250: Add note for PX-835
tty: 8250: Fix IS-200 PCI ID comment
tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
tty: 8250: Add support for Intashield IX cards
tty: 8250: Add support for additional Brainboxes PX cards
tty: 8250: Fix up PX-803/PX-857
tty: 8250: Fix port count of PX-257
tty: 8250: Add support for Intashield IS-100
tty: 8250: Add support for Brainboxes UP cards
tty: 8250: Add support for additional Brainboxes UC cards
tty: 8250: Remove UC-257 and UC-431
...
|
||
|
Linus Torvalds
|
707df298cb |
powerpc updates for 6.7
- Add support for KVM running as a nested hypervisor under development versions
of PowerVM, using the new PAPR nested virtualisation API.
- Add support for the BPF prog pack allocator.
- A rework of the non-server MMU handling to support execute-only on all platforms.
- Some optimisations & cleanups for the powerpc qspinlock code.
- Various other small features and fixes.
Thanks to: Aboorva Devarajan, Aditya Gupta, Amit Machhiwal, Benjamin Gray,
Christophe Leroy, Dr. David Alan Gilbert, Gaurav Batra, Gautam Menghani, Geert
Uytterhoeven, Haren Myneni, Hari Bathini, Joel Stanley, Jordan Niethe, Julia
Lawall, Kautuk Consul, Kuan-Wei Chiu, Michael Neuling, Minjie Du, Muhammad
Muzammil, Naveen N Rao, Nicholas Piggin, Nick Child, Nysal Jan K.A, Peter
Lafreniere, Rob Herring, Sachin Sant, Sebastian Andrzej Siewior, Shrikanth
Hegde, Srikar Dronamraju, Stanislav Kinsburskii, Vaibhav Jain, Wang Yufen, Yang
Yingliang, Yuan Tan.
-----BEGIN PGP SIGNATURE-----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=ddT4
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for KVM running as a nested hypervisor under development
versions of PowerVM, using the new PAPR nested virtualisation API
- Add support for the BPF prog pack allocator
- A rework of the non-server MMU handling to support execute-only on
all platforms
- Some optimisations & cleanups for the powerpc qspinlock code
- Various other small features and fixes
Thanks to Aboorva Devarajan, Aditya Gupta, Amit Machhiwal, Benjamin
Gray, Christophe Leroy, Dr. David Alan Gilbert, Gaurav Batra, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Julia Lawall, Kautuk Consul, Kuan-Wei Chiu, Michael
Neuling, Minjie Du, Muhammad Muzammil, Naveen N Rao, Nicholas Piggin,
Nick Child, Nysal Jan K.A, Peter Lafreniere, Rob Herring, Sachin Sant,
Sebastian Andrzej Siewior, Shrikanth Hegde, Srikar Dronamraju, Stanislav
Kinsburskii, Vaibhav Jain, Wang Yufen, Yang Yingliang, and Yuan Tan.
* tag 'powerpc-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (100 commits)
powerpc/vmcore: Add MMU information to vmcoreinfo
Revert "powerpc: add `cur_cpu_spec` symbol to vmcoreinfo"
powerpc/bpf: use bpf_jit_binary_pack_[alloc|finalize|free]
powerpc/bpf: rename powerpc64_jit_data to powerpc_jit_data
powerpc/bpf: implement bpf_arch_text_invalidate for bpf_prog_pack
powerpc/bpf: implement bpf_arch_text_copy
powerpc/code-patching: introduce patch_instructions()
powerpc/32s: Implement local_flush_tlb_page_psize()
powerpc/pseries: use kfree_sensitive() in plpks_gen_password()
powerpc/code-patching: Perform hwsync in __patch_instruction() in case of failure
powerpc/fsl_msi: Use device_get_match_data()
powerpc: Remove cpm_dp...() macros
powerpc/qspinlock: Rename yield_propagate_owner tunable
powerpc/qspinlock: Propagate sleepy if previous waiter is preempted
powerpc/qspinlock: don't propagate the not-sleepy state
powerpc/qspinlock: propagate owner preemptedness rather than CPU number
powerpc/qspinlock: stop queued waiters trying to set lock sleepy
powerpc/perf: Fix disabling BHRB and instruction sampling
powerpc/trace: Add support for HAVE_FUNCTION_ARG_ACCESS_API
powerpc/tools: Pass -mabi=elfv2 to gcc-check-mprofile-kernel.sh
...
|
||
|
Linus Torvalds
|
31e5f934ff |
Tracing updates for v6.7:
- Remove eventfs_file descriptor This is the biggest change, and the second part of making eventfs create its files dynamically. In 6.6 the first part was added, and that maintained a one to one mapping between eventfs meta descriptors and the directories and file inodes and dentries that were dynamically created. The directories were represented by a eventfs_inode and the files were represented by a eventfs_file. In v6.7 the eventfs_file is removed. As all events have the same directory make up (sched_switch has an "enable", "id", "format", etc files), the handing of what files are underneath each leaf eventfs directory is moved back to the tracing subsystem via a callback. When a event is added to the eventfs, it registers an array of evenfs_entry's. These hold the names of the files and the callbacks to call when the file is referenced. The callback gets the name so that the same callback may be used by multiple files. The callback then supplies the filesystem_operations structure needed to create this file. This has brought the memory footprint of creating multiple eventfs instances down by 2 megs each! - User events now has persistent events that are not associated to a single processes. These are privileged events that hang around even if no process is attached to them. - Clean up of seq_buf. There's talk about using seq_buf more to replace strscpy() and friends. But this also requires some minor modifications of seq_buf to be able to do this. - Expand instance ring buffers individually Currently if boot up creates an instance, and a trace event is enabled on that instance, the ring buffer for that instance and the top level ring buffer are expanded (1.4 MB per CPU). This wastes memory as this happens when nothing is using the top level instance. - Other minor clean ups and fixes. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZUMrBBQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6quzVAQCed/kPM7X9j2QZamJVDruMf2CmVxpu /TOvKvSKV584GgEAxLntf5VKx1Q98bc68y3Zkg+OCi8jSgORos1ROmURhws= =iIgb -----END PGP SIGNATURE----- Merge tag 'trace-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Remove eventfs_file descriptor This is the biggest change, and the second part of making eventfs create its files dynamically. In 6.6 the first part was added, and that maintained a one to one mapping between eventfs meta descriptors and the directories and file inodes and dentries that were dynamically created. The directories were represented by a eventfs_inode and the files were represented by a eventfs_file. In v6.7 the eventfs_file is removed. As all events have the same directory make up (sched_switch has an "enable", "id", "format", etc files), the handing of what files are underneath each leaf eventfs directory is moved back to the tracing subsystem via a callback. When an event is added to the eventfs, it registers an array of evenfs_entry's. These hold the names of the files and the callbacks to call when the file is referenced. The callback gets the name so that the same callback may be used by multiple files. The callback then supplies the filesystem_operations structure needed to create this file. This has brought the memory footprint of creating multiple eventfs instances down by 2 megs each! - User events now has persistent events that are not associated to a single processes. These are privileged events that hang around even if no process is attached to them - Clean up of seq_buf There's talk about using seq_buf more to replace strscpy() and friends. But this also requires some minor modifications of seq_buf to be able to do this - Expand instance ring buffers individually Currently if boot up creates an instance, and a trace event is enabled on that instance, the ring buffer for that instance and the top level ring buffer are expanded (1.4 MB per CPU). This wastes memory as this happens when nothing is using the top level instance - Other minor clean ups and fixes * tag 'trace-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (34 commits) seq_buf: Export seq_buf_puts() seq_buf: Export seq_buf_putc() eventfs: Use simple_recursive_removal() to clean up dentries eventfs: Remove special processing of dput() of events directory eventfs: Delete eventfs_inode when the last dentry is freed eventfs: Hold eventfs_mutex when calling callback functions eventfs: Save ownership and mode eventfs: Test for ei->is_freed when accessing ei->dentry eventfs: Have a free_ei() that just frees the eventfs_inode eventfs: Remove "is_freed" union with rcu head eventfs: Fix kerneldoc of eventfs_remove_rec() tracing: Have the user copy of synthetic event address use correct context eventfs: Remove extra dget() in eventfs_create_events_dir() tracing: Have trace_event_file have ref counters seq_buf: Introduce DECLARE_SEQ_BUF and seq_buf_str() eventfs: Fix typo in eventfs_inode union comment eventfs: Fix WARN_ON() in create_file_dentry() powerpc: Remove initialisation of readpos tracing/histograms: Simplify last_cmd_set() seq_buf: fix a misleading comment ... |
||
|
Linus Torvalds
|
8f6f76a6a2 |
As usual, lots of singleton and doubleton patches all over the tree and
there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- "kdump: use generic functions to simplify crashkernel reservation in
arch", from Baoquan He. This is mainly cleanups and consolidation of
the "crashkernel=" kernel parameter handling.
- After much discussion, David Laight's "minmax: Relax type checks in
min() and max()" is here. Hopefully reduces some typecasting and the
use of min_t() and max_t().
- A group of patches from Oleg Nesterov which clean up and slightly fix
our handling of reads from /proc/PID/task/... and which remove
task_struct.therad_group.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZUQP9wAKCRDdBJ7gKXxA
jmOAAQDh8sxagQYocoVsSm28ICqXFeaY9Co1jzBIDdNesAvYVwD/c2DHRqJHEiS4
63BNcG3+hM9nwGJHb5lyh5m79nBMRg0=
=On4u
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
|
||
|
Linus Torvalds
|
ecae0bd517 |
Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series "Fixes and cleanups to compaction".
- Joel Fernandes has a patchset ("Optimize mremap during mutual
alignment within PMD") which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested.
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i the
following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series "Do not try to access unaccepted memory" Adrian Hunter
provides some fixups for the recently-added "unaccepted memory' feature.
To increase the feature's checking coverage. "Plug a few gaps where
RAM is exposed without checking if it is unaccepted memory".
- In the series "cleanups for lockless slab shrink" Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code.
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series "use refcount+RCU method to implement
lockless slab shrink".
- David Hildenbrand contributes some maintenance work for the rmap code
in the series "Anon rmap cleanups".
- Kefeng Wang does more folio conversions and some maintenance work in
the migration code. Series "mm: migrate: more folio conversion and
unification".
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series "Add and use bdev_getblk()".
- In the series "Use nth_page() in place of direct struct page
manipulation" Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames.
- In the series "mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO" has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of gigantic
pages are in use.
- Matthew Wilcox has sent the series "Small hugetlb cleanups" - code
rationalization and folio conversions in the hugetlb code.
- Yin Fengwei has improved mlock()'s handling of large folios in the
series "support large folio for mlock"
- In the series "Expose swapcache stat for memcg v1" Liu Shixin has
added statistics for memcg v1 users which are available (and useful)
under memcg v2.
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named "MDWE
without inheritance".
- Kefeng Wang has provided the series "mm: convert numa balancing
functions to use a folio" which does what it says.
- In the series "mm/ksm: add fork-exec support for prctl" Stefan Roesch
makes is possible for a process to propagate KSM treatment across
exec().
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use "high
bandwidth memory" in addition to Optane Data Center Persistent Memory
Modules (DCPMM). The series is named "memory tiering: calculate
abstract distance based on ACPI HMAT"
- In the series "Smart scanning mode for KSM" Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans.
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in the
series "mm: memcg: fix tracking of pending stats updates values".
- In the series "Implement IOCTL to get and optionally clear info about
PTEs" Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits
us to atomically read-then-clear page softdirty state. This is mainly
used by CRIU.
- Hugh Dickins contributed the series "shmem,tmpfs: general maintenance"
- a bunch of relatively minor maintenance tweaks to this code.
- Matthew Wilcox has increased the use of the VMA lock over file-backed
page faults in the series "Handle more faults under the VMA lock". Some
rationalizations of the fault path became possible as a result.
- In the series "mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()" David Hildenbrand has implemented some cleanups
and folio conversions.
- In the series "various improvements to the GUP interface" Lorenzo
Stoakes has simplified and improved the GUP interface with an eye to
providing groundwork for future improvements.
- Andrey Konovalov has sent along the series "kasan: assorted fixes and
improvements" which does those things.
- Some page allocator maintenance work from Kemeng Shi in the series
"Two minor cleanups to break_down_buddy_pages".
- In thes series "New selftest for mm" Breno Leitao has developed
another MM self test which tickles a race we had between madvise() and
page faults.
- In the series "Add folio_end_read" Matthew Wilcox provides cleanups
and an optimization to the core pagecache code.
- Nhat Pham has added memcg accounting for hugetlb memory in the series
"hugetlb memcg accounting".
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series "Abstract vma_merge() and split_vma()".
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series "Fix page_owner's use of free timestamps".
- Lorenzo Stoakes has fixed the handling of new mappings of sealed files
in the series "permit write-sealed memfd read-only shared mappings".
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series "Batch hugetlb vmemmap modification operations".
- Some buffer_head folio conversions and cleanups from Matthew Wilcox in
the series "Finish the create_empty_buffers() transition".
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the series
"mm: PCP high auto-tuning".
- Roman Gushchin has contributed the patchset "mm: improve performance
of accounted kernel memory allocations" which improves their performance
by ~30% as measured by a micro-benchmark.
- folio conversions from Kefeng Wang in the series "mm: convert page
cpupid functions to folios".
- Some kmemleak fixups in Liu Shixin's series "Some bugfix about
kmemleak".
- Qi Zheng has improved our handling of memoryless nodes by keeping them
off the allocation fallback list. This is done in the series "handle
memoryless nodes more appropriately".
- khugepaged conversions from Vishal Moola in the series "Some
khugepaged folio conversions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZULEMwAKCRDdBJ7gKXxA
jhQHAQCYpD3g849x69DmHnHWHm/EHQLvQmRMDeYZI+nx/sCJOwEAw4AKg0Oemv9y
FgeUPAD1oasg6CP+INZvCj34waNxwAc=
=E+Y4
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
|
||
|
Linus Torvalds
|
426ee5196d |
sysctl-6.7-rc1
To help make the move of sysctls out of kernel/sysctl.c not incur a size
penalty sysctl has been changed to allow us to not require the sentinel, the
final empty element on the sysctl array. Joel Granados has been doing all this
work. On the v6.6 kernel we got the major infrastructure changes required to
support this. For v6.7-rc1 we have all arch/ and drivers/ modified to remove
the sentinel. Both arch and driver changes have been on linux-next for a bit
less than a month. It is worth re-iterating the value:
- this helps reduce the overall build time size of the kernel and run time
memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move sysctls
out from kernel/sysctl.c to their own files
For v6.8-rc1 expect removal of all the sentinels and also then the unneeded
check for procname == NULL.
The last 2 patches are fixes recently merged by Krister Johansen which allow
us again to use softlockup_panic early on boot. This used to work but the
alias work broke it. This is useful for folks who want to detect softlockups
super early rather than wait and spend money on cloud solutions with nothing
but an eventual hung kernel. Although this hadn't gone through linux-next it's
also a stable fix, so we might as well roll through the fixes now.
-----BEGIN PGP SIGNATURE-----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=Qf50
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"To help make the move of sysctls out of kernel/sysctl.c not incur a
size penalty sysctl has been changed to allow us to not require the
sentinel, the final empty element on the sysctl array. Joel Granados
has been doing all this work. On the v6.6 kernel we got the major
infrastructure changes required to support this. For v6.7-rc1 we have
all arch/ and drivers/ modified to remove the sentinel. Both arch and
driver changes have been on linux-next for a bit less than a month. It
is worth re-iterating the value:
- this helps reduce the overall build time size of the kernel and run
time memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move
sysctls out from kernel/sysctl.c to their own files
For v6.8-rc1 expect removal of all the sentinels and also then the
unneeded check for procname == NULL.
The last two patches are fixes recently merged by Krister Johansen
which allow us again to use softlockup_panic early on boot. This used
to work but the alias work broke it. This is useful for folks who want
to detect softlockups super early rather than wait and spend money on
cloud solutions with nothing but an eventual hung kernel. Although
this hadn't gone through linux-next it's also a stable fix, so we
might as well roll through the fixes now"
* tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits)
watchdog: move softlockup_panic back to early_param
proc: sysctl: prevent aliased sysctls from getting passed to init
intel drm: Remove now superfluous sentinel element from ctl_table array
Drivers: hv: Remove now superfluous sentinel element from ctl_table array
raid: Remove now superfluous sentinel element from ctl_table array
fw loader: Remove the now superfluous sentinel element from ctl_table array
sgi-xp: Remove the now superfluous sentinel element from ctl_table array
vrf: Remove the now superfluous sentinel element from ctl_table array
char-misc: Remove the now superfluous sentinel element from ctl_table array
infiniband: Remove the now superfluous sentinel element from ctl_table array
macintosh: Remove the now superfluous sentinel element from ctl_table array
parport: Remove the now superfluous sentinel element from ctl_table array
scsi: Remove now superfluous sentinel element from ctl_table array
tty: Remove now superfluous sentinel element from ctl_table array
xen: Remove now superfluous sentinel element from ctl_table array
hpet: Remove now superfluous sentinel element from ctl_table array
c-sky: Remove now superfluous sentinel element from ctl_talbe array
powerpc: Remove now superfluous sentinel element from ctl_table arrays
riscv: Remove now superfluous sentinel element from ctl_table array
x86/vdso: Remove now superfluous sentinel element from ctl_table array
...
|
||
|
Linus Torvalds
|
babe393974 |
The number of commits for documentation is not huge this time around, but
there are some significant changes nonetheless:
- Some more Spanish-language and Chinese translations.
- The much-discussed documentation of the confidential-computing threat
model.
- Powerpc and RISCV documentation move under Documentation/arch - these
complete this particular bit of documentation churn.
- A large traditional-Chinese documentation update.
- A new document on backporting and conflict resolution.
- Some kernel-doc and Sphinx fixes.
Plus the usual smattering of smaller updates and typo fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmVBNv8PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y0JkH/36MOpkaDnsY69/dMRKSuD4mAAP2H6LS8V63
SsMgH5VCj8lcy/Tz1+J89t14pbcX8l0viKxSo4UxvzoJ5snrz8A8gZ9oqY7NCcNs
nMtolnN5IwdbgGnEGqASSLsl07lnabhRK0VYv9ZO7lHjYQp97VsJ/qrjJn385HFE
vYW8iRcxcKdwtuuwOtbPcdAMjP54saJdNC5wMLsfMR0csKcGbzaSNpqpiGovzT7l
phG2DSxrJH0gUZyeGPryroNppaf+mVKSDSiwRdI8mzm0J67p6dZYYwBS1Iw6Awbf
8iYoj6W63/FVQbXffPx5d6ffOSQh4JkAskxgBUOzluSGusSDc+4=
=9HU5
-----END PGP SIGNATURE-----
Merge tag 'docs-6.7' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"The number of commits for documentation is not huge this time around,
but there are some significant changes nonetheless:
- Some more Spanish-language and Chinese translations
- The much-discussed documentation of the confidential-computing
threat model
- Powerpc and RISCV documentation move under Documentation/arch -
these complete this particular bit of documentation churn
- A large traditional-Chinese documentation update
- A new document on backporting and conflict resolution
- Some kernel-doc and Sphinx fixes
Plus the usual smattering of smaller updates and typo fixes"
* tag 'docs-6.7' of git://git.lwn.net/linux: (40 commits)
scripts/kernel-doc: Fix the regex for matching -Werror flag
docs: backporting: address feedback
Documentation: driver-api: pps: Update PPS generator documentation
speakup: Document USB support
doc: blk-ioprio: Bring the doc in line with the implementation
docs: usb: fix reference to nonexistent file in UVC Gadget
docs: doc-guide: mention 'make refcheckdocs'
Documentation: fix typo in dynamic-debug howto
scripts/kernel-doc: match -Werror flag strictly
Documentation/sphinx: Remove the repeated word "the" in comments.
docs: sparse: add SPDX-License-Identifier
docs/zh_CN: Add subsystem-apis Chinese translation
docs/zh_TW: update contents for zh_TW
docs: submitting-patches: encourage direct notifications to commenters
docs: add backporting and conflict resolution document
docs: move riscv under arch
docs: update link to powerpc/vmemmap_dedup.rst
mm/memory-hotplug: fix typo in documentation
docs: move powerpc under arch
PCI: Update the devres documentation regarding to pcim_*()
...
|
||
|
Linus Torvalds
|
1e0c505e13 |
asm-generic updates for v6.7
The ia64 architecture gets its well-earned retirement as planned, now that there is one last (mostly) working release that will be maintained as an LTS kernel. The architecture specific system call tables are updated for the added map_shadow_stack() syscall and to remove references to the long-gone sys_lookup_dcookie() syscall. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmVC40IACgkQYKtH/8kJ Uidhmw/9EX+aWSXGoObJ3fngaNSMw+PmrEuP8qEKBHxfKHcCdX3hc451Oh4GlhaQ tru91pPwgNvN2/rfoKusxT+V4PemGIzfNni/04rp+P0kvmdw5otQ2yNhsQNsfVmq XGWvkxF4P2GO6bkjjfR/1dDq7GtlyXtwwPDKeLbYb6TnJOZjtx+EAN27kkfSn1Ms R4Sa3zJ+DfHUmHL5S9g+7UD/CZ5GfKNmIskI4Mz5GsfoUz/0iiU+Bge/9sdcdSJQ kmbLy5YnVzfooLZ3TQmBFsO3iAMWb0s/mDdtyhqhTVmTUshLolkPYyKnPFvdupyv shXcpEST2XJNeaDRnL2K4zSCdxdbnCZHDpjfl9wfioBg7I8NfhXKpf1jYZHH1de4 LXq8ndEFEOVQw/zSpYWfQq1sux8Jiqr+UK/ukbVeFWiGGIUs91gEWtPAf8T0AZo9 ujkJvaWGl98O1g5wmBu0/dAR6QcFJMDfVwbmlIFpU8O+MEaz6X8mM+O5/T0IyTcD eMbAUjj4uYcU7ihKzHEv/0SS9Of38kzff67CLN5k8wOP/9NlaGZ78o1bVle9b52A BdhrsAefFiWHp1jT6Y9Rg4HOO/TguQ9e6EWSKOYFulsiLH9LEFaB9RwZLeLytV0W vlAgY9rUW77g1OJcb7DoNv33nRFuxsKqsnz3DEIXtgozo9CzbYI= =H1vH -----END PGP SIGNATURE----- Merge tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull ia64 removal and asm-generic updates from Arnd Bergmann: - The ia64 architecture gets its well-earned retirement as planned, now that there is one last (mostly) working release that will be maintained as an LTS kernel. - The architecture specific system call tables are updated for the added map_shadow_stack() syscall and to remove references to the long-gone sys_lookup_dcookie() syscall. * tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: hexagon: Remove unusable symbols from the ptrace.h uapi asm-generic: Fix spelling of architecture arch: Reserve map_shadow_stack() syscall number for all architectures syscalls: Cleanup references to sys_lookup_dcookie() Documentation: Drop or replace remaining mentions of IA64 lib/raid6: Drop IA64 support Documentation: Drop IA64 from feature descriptions kernel: Drop IA64 support from sig_fault handlers arch: Remove Itanium (IA-64) architecture |
||
|
Linus Torvalds
|
90d624af2e |
for-6.7/block-2023-10-30
-----BEGIN PGP SIGNATURE-----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=sace
-----END PGP SIGNATURE-----
Merge tag 'for-6.7/block-2023-10-30' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- Improvements to the queue_rqs() support, and adding null_blk support
for that as well (Chengming)
- Series improving badblocks support (Coly)
- Key store support for sed-opal (Greg)
- IBM partition string handling improvements (Jan)
- Make number of ublk devices supported configurable (Mike)
- Cancelation improvements for ublk (Ming)
- MD pull requests via Song:
- Handle timeout in md-cluster, by Denis Plotnikov
- Cleanup pers->prepare_suspend, by Yu Kuai
- Rewrite mddev_suspend(), by Yu Kuai
- Simplify md_seq_ops, by Yu Kuai
- Reduce unnecessary locking array_state_store(), by Mariusz
Tkaczyk
- Make rdev add/remove independent from daemon thread, by Yu Kuai
- Refactor code around quiesce() and mddev_suspend(), by Yu Kuai
- NVMe pull request via Keith:
- nvme-auth updates (Mark)
- nvme-tcp tls (Hannes)
- nvme-fc annotaions (Kees)
- Misc cleanups and improvements (Jiapeng, Joel)
* tag 'for-6.7/block-2023-10-30' of git://git.kernel.dk/linux: (95 commits)
block: ublk_drv: Remove unused function
md: cleanup pers->prepare_suspend()
nvme-auth: allow mixing of secret and hash lengths
nvme-auth: use transformed key size to create resp
nvme-auth: alloc nvme_dhchap_key as single buffer
nvmet-tcp: use 'spin_lock_bh' for state_lock()
powerpc/pseries: PLPKS SED Opal keystore support
block: sed-opal: keystore access for SED Opal keys
block:sed-opal: SED Opal keystore
ublk: simplify aborting request
ublk: replace monitor with cancelable uring_cmd
ublk: quiesce request queue when aborting queue
ublk: rename mm_lock as lock
ublk: move ublk_cancel_dev() out of ub->mutex
ublk: make sure io cmd handled in submitter task context
ublk: don't get ublk device reference in ublk_abort_queue()
ublk: Make ublks_max configurable
ublk: Limit dev_id/ub_number values
md-cluster: check for timeout while a new disk adding
nvme: rework NVME_AUTH Kconfig selection
...
|
||
|
Linus Torvalds
|
7d461b291e |
drm for 6.7-rc1
kernel:
- add initial vmemdup-user-array
core:
- fix platform remove() to return void
- drm_file owner updated to reflect owner
- move size calcs to drm buddy allocator
- let GPUVM build as a module
- allow variable number of run-queues in scheduler
edid:
- handle bad h/v sync_end in EDIDs
panfrost:
- add Boris as maintainer
fbdev:
- use fb_ops helpers more
- only allow logo use from fbcon
- rename fb_pgproto to pgprot_framebuffer
- add HPD state to drm_connector_oob_hotplug_event
- convert to fbdev i/o mem helpers
i915:
- Enable meteorlake by default
- Early Xe2 LPD/Lunarlake display enablement
- Rework subplatforms into IP version checks
- GuC based TLB invalidation for Meteorlake
- Display rework for future Xe driver integration
- LNL FBC features
- LNL display feature capability reads
- update recommended fw versions for DG2+
- drop fastboot module parameter
- added deviceid for Arrowlake-S
- drop preproduction workarounds
- don't disable preemption for resets
- cleanup inlines in headers
- PXP firmware loading fix
- Fix sg list lengths
- DSC PPS state readout/verification
- Add more RPL P/U PCI IDs
- Add new DG2-G12 stepping
- DP enhanced framing support to state checker
- Improve shared link bandwidth management
- stop using GEM macros in display code
- refactor related code into display code
- locally enable W=1 warnings
- remove PSR watchdog timers on LNL
amdgpu:
- RAS/FRU EEPROM updatse
- IP discovery updatses
- GC 11.5 support
- DCN 3.5 support
- VPE 6.1 support
- NBIO 7.11 support
- DML2 support
- lots of IP updates
- use flexible arrays for bo list handling
- W=1 fixes
- Enable seamless boot in more cases
- Enable context type property for HDMI
- Rework GPUVM TLB flushing
- VCN IB start/size alignment fixes
amdkfd:
- GC 10/11 fixes
- GC 11.5 support
- use partial migration in GPU faults
radeon:
- W=1 Fixes
- fix some possible buffer overflow/NULL derefs
nouveau:
- update uapi for NO_PREFETCH
- scheduler/fence fixes
- rework suspend/resume for GSP-RM
- rework display in preparation for GSP-RM
habanalabs:
- uapi: expose tsc clock
- uapi: block access to eventfd through control device
- uapi: force dma-buf export to PAGE_SIZE alignments
- complete move to accel subsystem
- move firmware interface include files
- perform hard reset on PCIe AXI drain event
- optimise user interrupt handling
msm:
- DP: use existing helpers for DPCD
- DPU: interrupts reworked
- gpu: a7xx (a730/a740) support
- decouple msm_drv from kms for headless devices
mediatek:
- MT8188 dsi/dp/edp support
- DDP GAMMA - 12 bit LUT support
- connector dynamic selection capability
rockchip:
- rv1126 mipi-dsi/vop support
- add planar formats
ast:
- rename constants
panels:
- Mitsubishi AA084XE01
- JDI LPM102A188A
- LTK050H3148W-CTA6
ivpu:
- power management fixes
qaic:
- add detach slice bo api
komeda:
- add NV12 writeback
tegra:
- support NVSYNC/NHSYNC
- host1x suspend fixes
ili9882t:
- separate into own driver
-----BEGIN PGP SIGNATURE-----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=l79u
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights:
- AMD adds some more upcoming HW platforms
- Intel made Meteorlake stable and started adding Lunarlake
- nouveau has a bunch of display rework in prepartion for the NVIDIA
GSP firmware support
- msm adds a7xx support
- habanalabs has finished migration to accel subsystem
Detail summary:
kernel:
- add initial vmemdup-user-array
core:
- fix platform remove() to return void
- drm_file owner updated to reflect owner
- move size calcs to drm buddy allocator
- let GPUVM build as a module
- allow variable number of run-queues in scheduler
edid:
- handle bad h/v sync_end in EDIDs
panfrost:
- add Boris as maintainer
fbdev:
- use fb_ops helpers more
- only allow logo use from fbcon
- rename fb_pgproto to pgprot_framebuffer
- add HPD state to drm_connector_oob_hotplug_event
- convert to fbdev i/o mem helpers
i915:
- Enable meteorlake by default
- Early Xe2 LPD/Lunarlake display enablement
- Rework subplatforms into IP version checks
- GuC based TLB invalidation for Meteorlake
- Display rework for future Xe driver integration
- LNL FBC features
- LNL display feature capability reads
- update recommended fw versions for DG2+
- drop fastboot module parameter
- added deviceid for Arrowlake-S
- drop preproduction workarounds
- don't disable preemption for resets
- cleanup inlines in headers
- PXP firmware loading fix
- Fix sg list lengths
- DSC PPS state readout/verification
- Add more RPL P/U PCI IDs
- Add new DG2-G12 stepping
- DP enhanced framing support to state checker
- Improve shared link bandwidth management
- stop using GEM macros in display code
- refactor related code into display code
- locally enable W=1 warnings
- remove PSR watchdog timers on LNL
amdgpu:
- RAS/FRU EEPROM updatse
- IP discovery updatses
- GC 11.5 support
- DCN 3.5 support
- VPE 6.1 support
- NBIO 7.11 support
- DML2 support
- lots of IP updates
- use flexible arrays for bo list handling
- W=1 fixes
- Enable seamless boot in more cases
- Enable context type property for HDMI
- Rework GPUVM TLB flushing
- VCN IB start/size alignment fixes
amdkfd:
- GC 10/11 fixes
- GC 11.5 support
- use partial migration in GPU faults
radeon:
- W=1 Fixes
- fix some possible buffer overflow/NULL derefs
nouveau:
- update uapi for NO_PREFETCH
- scheduler/fence fixes
- rework suspend/resume for GSP-RM
- rework display in preparation for GSP-RM
habanalabs:
- uapi: expose tsc clock
- uapi: block access to eventfd through control device
- uapi: force dma-buf export to PAGE_SIZE alignments
- complete move to accel subsystem
- move firmware interface include files
- perform hard reset on PCIe AXI drain event
- optimise user interrupt handling
msm:
- DP: use existing helpers for DPCD
- DPU: interrupts reworked
- gpu: a7xx (a730/a740) support
- decouple msm_drv from kms for headless devices
mediatek:
- MT8188 dsi/dp/edp support
- DDP GAMMA - 12 bit LUT support
- connector dynamic selection capability
rockchip:
- rv1126 mipi-dsi/vop support
- add planar formats
ast:
- rename constants
panels:
- Mitsubishi AA084XE01
- JDI LPM102A188A
- LTK050H3148W-CTA6
ivpu:
- power management fixes
qaic:
- add detach slice bo api
komeda:
- add NV12 writeback
tegra:
- support NVSYNC/NHSYNC
- host1x suspend fixes
ili9882t:
- separate into own driver"
* tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits)
drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo
drm/amdgpu: Remove duplicate fdinfo fields
drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded
drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems
drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table
drm/amdgpu: Identify data parity error corrected in replay mode
drm/amdgpu: Fix typo in IP discovery parsing
drm/amd/display: fix S/G display enablement
drm/amdxcp: fix amdxcp unloads incompletely
drm/amd/amdgpu: fix the GPU power print error in pm info
drm/amdgpu: Use pcie domain of xcc acpi objects
drm/amd: check num of link levels when update pcie param
drm/amdgpu: Add a read to GFX v9.4.3 ring test
drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported.
drm/amdgpu: get RAS poison status from DF v4_6_2
drm/amdgpu: Use discovery table's subrevision
drm/amd/display: 3.2.256
drm/amd/display: add interface to query SubVP status
drm/amd/display: Read before writing Backlight Mode Set Register
drm/amd/display: Disable SYMCLK32_SE RCO on DCN314
...
|
||
|
Linus Torvalds
|
befaa609f4 |
hardening updates for v6.7-rc1
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R. Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)
-----BEGIN PGP SIGNATURE-----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=0iVF
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One of the more voluminous set of changes is for adding the new
__counted_by annotation[1] to gain run-time bounds checking of
dynamically sized arrays with UBSan.
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R.
Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem
Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas
Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees
Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)"
* tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits)
hwmon: (acpi_power_meter) replace open-coded kmemdup_nul
reset: Annotate struct reset_control_array with __counted_by
kexec: Annotate struct crash_mem with __counted_by
virtio_console: Annotate struct port_buffer with __counted_by
ima: Add __counted_by for struct modsig and use struct_size()
MAINTAINERS: Include stackleak paths in hardening entry
string: Adjust strtomem() logic to allow for smaller sources
hardening: x86: drop reference to removed config AMD_IOMMU_V2
randstruct: Fix gcc-plugin performance mode to stay in group
mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by
drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by
irqchip/imx-intmux: Annotate struct intmux_data with __counted_by
KVM: Annotate struct kvm_irq_routing_table with __counted_by
virt: acrn: Annotate struct vm_memory_region_batch with __counted_by
hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by
sparc: Annotate struct cpuinfo_tree with __counted_by
isdn: kcapi: replace deprecated strncpy with strscpy_pad
isdn: replace deprecated strncpy with strscpy
NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by
nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by
...
|
||
|
Linus Torvalds
|
2656821f1f |
RCU pull request for v6.7
This pull request contains the following branches:
rcu/torture: RCU torture, locktorture and generic torture infrastructure
updates that include various fixes, cleanups and consolidations.
Among the user visible things, ftrace dumps can now be found into
their own file, and module parameters get better documented and
reported on dumps.
rcu/fixes: Generic and misc fixes all over the place. Some highlights:
* Hotplug handling has seen some light cleanups and comments.
* An RCU barrier can now be triggered through sysfs to serialize
memory stress testing and avoid OOM.
* Object information is now dumped in case of invalid callback
invocation.
* Also various SRCU issues, too hard to trigger to deserve urgent
pull requests, have been fixed.
rcu/docs: RCU documentation updates
rcu/refscale: RCU reference scalability test minor fixes and doc
improvements.
rcu/tasks: RCU tasks minor fixes
rcu/stall: Stall detection updates. Introduce RCU CPU Stall notifiers
that allows a subsystem to provide informations to help debugging.
Also cure some false positive stalls.
-----BEGIN PGP SIGNATURE-----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=cVD7
-----END PGP SIGNATURE-----
Merge tag 'rcu-next-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull RCU updates from Frederic Weisbecker:
- RCU torture, locktorture and generic torture infrastructure updates
that include various fixes, cleanups and consolidations.
Among the user visible things, ftrace dumps can now be found into
their own file, and module parameters get better documented and
reported on dumps.
- Generic and misc fixes all over the place. Some highlights:
* Hotplug handling has seen some light cleanups and comments
* An RCU barrier can now be triggered through sysfs to serialize
memory stress testing and avoid OOM
* Object information is now dumped in case of invalid callback
invocation
* Also various SRCU issues, too hard to trigger to deserve urgent
pull requests, have been fixed
- RCU documentation updates
- RCU reference scalability test minor fixes and doc improvements.
- RCU tasks minor fixes
- Stall detection updates. Introduce RCU CPU Stall notifiers that
allows a subsystem to provide informations to help debugging. Also
cure some false positive stalls.
* tag 'rcu-next-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: (56 commits)
srcu: Only accelerate on enqueue time
locktorture: Check the correct variable for allocation failure
srcu: Fix callbacks acceleration mishandling
rcu: Comment why callbacks migration can't wait for CPUHP_RCUTREE_PREP
rcu: Standardize explicit CPU-hotplug calls
rcu: Conditionally build CPU-hotplug teardown callbacks
rcu: Remove references to rcu_migrate_callbacks() from diagrams
rcu: Assume rcu_report_dead() is always called locally
rcu: Assume IRQS disabled from rcu_report_dead()
rcu: Use rcu_segcblist_segempty() instead of open coding it
rcu: kmemleak: Ignore kmemleak false positives when RCU-freeing objects
srcu: Fix srcu_struct node grpmask overflow on 64-bit systems
torture: Convert parse-console.sh to mktemp
rcutorture: Traverse possible cpu to set maxcpu in rcu_nocb_toggle()
rcutorture: Replace schedule_timeout*() 1-jiffy waits with HZ/20
torture: Add kvm.sh --debug-info argument
locktorture: Rename readers_bind/writers_bind to bind_readers/bind_writers
doc: Catch-up update for locktorture module parameters
locktorture: Add call_rcu_chains module parameter
locktorture: Add new module parameters to lock_torture_print_module_parms()
...
|
||
|
Linus Torvalds
|
63ce50fff9 |
Scheduler changes for v6.7 are:
- Fair scheduler (SCHED_OTHER) improvements:
- Remove the old and now unused SIS_PROP code & option
- Scan cluster before LLC in the wake-up path
- Use candidate prev/recent_used CPU if scanning failed for cluster wakeup
- NUMA scheduling improvements:
- Improve the VMA access-PID code to better skip/scan VMAs
- Extend tracing to cover VMA-skipping decisions
- Improve/fix the recently introduced sched_numa_find_nth_cpu() code
- Generalize numa_map_to_online_node()
- Energy scheduling improvements:
- Remove the EM_MAX_COMPLEXITY limit
- Add tracepoints to track energy computation
- Make the behavior of the 'sched_energy_aware' sysctl more consistent
- Consolidate and clean up access to a CPU's max compute capacity
- Fix uclamp code corner cases
- RT scheduling improvements:
- Drive dl_rq->overloaded with dl_rq->pushable_dl_tasks updates
- Drive the ->rto_mask with rt_rq->pushable_tasks updates
- Scheduler scalability improvements:
- Rate-limit updates to tg->load_avg
- On x86 disable IBRS when CPU is offline to improve single-threaded performance
- Micro-optimize in_task() and in_interrupt()
- Micro-optimize the PSI code
- Avoid updating PSI triggers and ->rtpoll_total when there are no state changes
- Core scheduler infrastructure improvements:
- Use saved_state to reduce some spurious freezer wakeups
- Bring in a handful of fast-headers improvements to scheduler headers
- Make the scheduler UAPI headers more widely usable by user-space
- Simplify the control flow of scheduler syscalls by using lock guards
- Fix sched_setaffinity() vs. CPU hotplug race
- Scheduler debuggability improvements:
- Disallow writing invalid values to sched_rt_period_us
- Fix a race in the rq-clock debugging code triggering warnings
- Fix a warning in the bandwidth distribution code
- Micro-optimize in_atomic_preempt_off() checks
- Enforce that the tasklist_lock is held in for_each_thread()
- Print the TGID in sched_show_task()
- Remove the /proc/sys/kernel/sched_child_runs_first sysctl
- Misc cleanups & fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GDqb
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Fair scheduler (SCHED_OTHER) improvements:
- Remove the old and now unused SIS_PROP code & option
- Scan cluster before LLC in the wake-up path
- Use candidate prev/recent_used CPU if scanning failed for cluster
wakeup
NUMA scheduling improvements:
- Improve the VMA access-PID code to better skip/scan VMAs
- Extend tracing to cover VMA-skipping decisions
- Improve/fix the recently introduced sched_numa_find_nth_cpu() code
- Generalize numa_map_to_online_node()
Energy scheduling improvements:
- Remove the EM_MAX_COMPLEXITY limit
- Add tracepoints to track energy computation
- Make the behavior of the 'sched_energy_aware' sysctl more
consistent
- Consolidate and clean up access to a CPU's max compute capacity
- Fix uclamp code corner cases
RT scheduling improvements:
- Drive dl_rq->overloaded with dl_rq->pushable_dl_tasks updates
- Drive the ->rto_mask with rt_rq->pushable_tasks updates
Scheduler scalability improvements:
- Rate-limit updates to tg->load_avg
- On x86 disable IBRS when CPU is offline to improve single-threaded
performance
- Micro-optimize in_task() and in_interrupt()
- Micro-optimize the PSI code
- Avoid updating PSI triggers and ->rtpoll_total when there are no
state changes
Core scheduler infrastructure improvements:
- Use saved_state to reduce some spurious freezer wakeups
- Bring in a handful of fast-headers improvements to scheduler
headers
- Make the scheduler UAPI headers more widely usable by user-space
- Simplify the control flow of scheduler syscalls by using lock
guards
- Fix sched_setaffinity() vs. CPU hotplug race
Scheduler debuggability improvements:
- Disallow writing invalid values to sched_rt_period_us
- Fix a race in the rq-clock debugging code triggering warnings
- Fix a warning in the bandwidth distribution code
- Micro-optimize in_atomic_preempt_off() checks
- Enforce that the tasklist_lock is held in for_each_thread()
- Print the TGID in sched_show_task()
- Remove the /proc/sys/kernel/sched_child_runs_first sysctl
... and misc cleanups & fixes"
* tag 'sched-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (82 commits)
sched/fair: Remove SIS_PROP
sched/fair: Use candidate prev/recent_used CPU if scanning failed for cluster wakeup
sched/fair: Scan cluster before scanning LLC in wake-up path
sched: Add cpus_share_resources API
sched/core: Fix RQCF_ACT_SKIP leak
sched/fair: Remove unused 'curr' argument from pick_next_entity()
sched/nohz: Update comments about NEWILB_KICK
sched/fair: Remove duplicate #include
sched/psi: Update poll => rtpoll in relevant comments
sched: Make PELT acronym definition searchable
sched: Fix stop_one_cpu_nowait() vs hotplug
sched/psi: Bail out early from irq time accounting
sched/topology: Rename 'DIE' domain to 'PKG'
sched/psi: Delete the 'update_total' function parameter from update_triggers()
sched/psi: Avoid updating PSI triggers and ->rtpoll_total when there are no state changes
sched/headers: Remove comment referring to rq::cpu_load, since this has been removed
sched/numa: Complete scanning of inactive VMAs when there is no alternative
sched/numa: Complete scanning of partial VMAs regardless of PID activity
sched/numa: Move up the access pid reset logic
sched/numa: Trace decisions related to skipping VMAs
...
|
||
|
Linus Torvalds
|
3cf3fabccb |
Locking changes in this cycle are:
- Futex improvements:
- Add the 'futex2' syscall ABI, which is an attempt to get away from the
multiplex syscall and adds a little room for extentions, while lifting
some limitations.
- Fix futex PI recursive rt_mutex waiter state bug
- Fix inter-process shared futexes on no-MMU systems
- Use folios instead of pages
- Micro-optimizations of locking primitives:
- Improve arch_spin_value_unlocked() on asm-generic ticket spinlock
architectures, to improve lockref code generation.
- Improve the x86-32 lockref_get_not_zero() main loop by adding
build-time CMPXCHG8B support detection for the relevant lockref code,
and by better interfacing the CMPXCHG8B assembly code with the compiler.
- Introduce arch_sync_try_cmpxchg() on x86 to improve sync_try_cmpxchg()
code generation. Convert some sync_cmpxchg() users to sync_try_cmpxchg().
- Micro-optimize rcuref_put_slowpath()
- Locking debuggability improvements:
- Improve CONFIG_DEBUG_RT_MUTEXES=y to have a fast-path as well
- Enforce atomicity of sched_submit_work(), which is de-facto atomic but
was un-enforced previously.
- Extend <linux/cleanup.h>'s no_free_ptr() with __must_check semantics
- Fix ww_mutex self-tests
- Clean up const-propagation in <linux/seqlock.h> and simplify
the API-instantiation macros a bit.
- RT locking improvements:
- Provide the rt_mutex_*_schedule() primitives/helpers and use them
in the rtmutex code to avoid recursion vs. rtlock on the PI state.
- Add nested blocking lockdep asserts to rt_mutex_lock(), rtlock_lock()
and rwbase_read_lock().
- Plus misc fixes & cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=36Ff
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Info Molnar:
"Futex improvements:
- Add the 'futex2' syscall ABI, which is an attempt to get away from
the multiplex syscall and adds a little room for extentions, while
lifting some limitations.
- Fix futex PI recursive rt_mutex waiter state bug
- Fix inter-process shared futexes on no-MMU systems
- Use folios instead of pages
Micro-optimizations of locking primitives:
- Improve arch_spin_value_unlocked() on asm-generic ticket spinlock
architectures, to improve lockref code generation
- Improve the x86-32 lockref_get_not_zero() main loop by adding
build-time CMPXCHG8B support detection for the relevant lockref
code, and by better interfacing the CMPXCHG8B assembly code with
the compiler
- Introduce arch_sync_try_cmpxchg() on x86 to improve
sync_try_cmpxchg() code generation. Convert some sync_cmpxchg()
users to sync_try_cmpxchg().
- Micro-optimize rcuref_put_slowpath()
Locking debuggability improvements:
- Improve CONFIG_DEBUG_RT_MUTEXES=y to have a fast-path as well
- Enforce atomicity of sched_submit_work(), which is de-facto atomic
but was un-enforced previously.
- Extend <linux/cleanup.h>'s no_free_ptr() with __must_check
semantics
- Fix ww_mutex self-tests
- Clean up const-propagation in <linux/seqlock.h> and simplify the
API-instantiation macros a bit
RT locking improvements:
- Provide the rt_mutex_*_schedule() primitives/helpers and use them
in the rtmutex code to avoid recursion vs. rtlock on the PI state.
- Add nested blocking lockdep asserts to rt_mutex_lock(),
rtlock_lock() and rwbase_read_lock()
.. plus misc fixes & cleanups"
* tag 'locking-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
futex: Don't include process MM in futex key on no-MMU
locking/seqlock: Fix grammar in comment
alpha: Fix up new futex syscall numbers
locking/seqlock: Propagate 'const' pointers within read-only methods, remove forced type casts
locking/lockdep: Fix string sizing bug that triggers a format-truncation compiler-warning
locking/seqlock: Change __seqprop() to return the function pointer
locking/seqlock: Simplify SEQCOUNT_LOCKNAME()
locking/atomics: Use atomic_try_cmpxchg_release() to micro-optimize rcuref_put_slowpath()
locking/atomic, xen: Use sync_try_cmpxchg() instead of sync_cmpxchg()
locking/atomic/x86: Introduce arch_sync_try_cmpxchg()
locking/atomic: Add generic support for sync_try_cmpxchg() and its fallback
locking/seqlock: Fix typo in comment
futex/requeue: Remove unnecessary ‘NULL’ initialization from futex_proxy_trylock_atomic()
locking/local, arch: Rewrite local_add_unless() as a static inline function
locking/debug: Fix debugfs API return value checks to use IS_ERR()
locking/ww_mutex/test: Make sure we bail out instead of livelock
locking/ww_mutex/test: Fix potential workqueue corruption
locking/ww_mutex/test: Use prng instead of rng to avoid hangs at bootup
futex: Add sys_futex_requeue()
futex: Add flags2 argument to futex_requeue()
...
|
||
|
Linus Torvalds
|
14ab6d425e |
vfs-6.7.ctime
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTppYgAKCRCRxhvAZXjc okIHAP9anLz1QDyMLH12ASuHjgBc0Of3jcB6NB97IWGpL4O21gEA46ohaD+vcJuC YkBLU3lXqQ87nfu28ExFAzh10hG2jwM= =m4pB -----END PGP SIGNATURE----- Merge tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs Pull vfs inode time accessor updates from Christian Brauner: "This finishes the conversion of all inode time fields to accessor functions as discussed on list. Changing timestamps manually as we used to do before is error prone. Using accessors function makes this robust. It does not contain the switch of the time fields to discrete 64 bit integers to replace struct timespec and free up space in struct inode. But after this, the switch can be trivially made and the patch should only affect the vfs if we decide to do it" * tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (86 commits) fs: rename inode i_atime and i_mtime fields security: convert to new timestamp accessors selinux: convert to new timestamp accessors apparmor: convert to new timestamp accessors sunrpc: convert to new timestamp accessors mm: convert to new timestamp accessors bpf: convert to new timestamp accessors ipc: convert to new timestamp accessors linux: convert to new timestamp accessors zonefs: convert to new timestamp accessors xfs: convert to new timestamp accessors vboxsf: convert to new timestamp accessors ufs: convert to new timestamp accessors udf: convert to new timestamp accessors ubifs: convert to new timestamp accessors tracefs: convert to new timestamp accessors sysv: convert to new timestamp accessors squashfs: convert to new timestamp accessors server: convert to new timestamp accessors client: convert to new timestamp accessors ... |
||
|
Linus Torvalds
|
3b3f874cc1 |
vfs-6.7.misc
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTpoQAAKCRCRxhvAZXjc
ovFNAQDgIRjXfZ1Ku+USxsRRdqp8geJVaNc3PuMmYhOYhUenqgEAmC1m+p0y31dS
P6+HlL16Mqgu0tpLCcJK9BibpDZ0Ew4=
=7yD1
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Rename and export helpers that get write access to a mount. They
are used in overlayfs to get write access to the upper mount.
- Print the pretty name of the root device on boot failure. This
helps in scenarios where we would usually only print
"unknown-block(1,2)".
- Add an internal SB_I_NOUMASK flag. This is another part in the
endless POSIX ACL saga in a way.
When POSIX ACLs are enabled via SB_POSIXACL the vfs cannot strip
the umask because if the relevant inode has POSIX ACLs set it might
take the umask from there. But if the inode doesn't have any POSIX
ACLs set then we apply the umask in the filesytem itself. So we end
up with:
(1) no SB_POSIXACL -> strip umask in vfs
(2) SB_POSIXACL -> strip umask in filesystem
The umask semantics associated with SB_POSIXACL allowed filesystems
that don't even support POSIX ACLs at all to raise SB_POSIXACL
purely to avoid umask stripping. That specifically means NFS v4 and
Overlayfs. NFS v4 does it because it delegates this to the server
and Overlayfs because it needs to delegate umask stripping to the
upper filesystem, i.e., the filesystem used as the writable layer.
This went so far that SB_POSIXACL is raised eve on kernels that
don't even have POSIX ACL support at all.
Stop this blatant abuse and add SB_I_NOUMASK which is an internal
superblock flag that filesystems can raise to opt out of umask
handling. That should really only be the two mentioned above. It's
not that we want any filesystems to do this. Ideally we have all
umask handling always in the vfs.
- Make overlayfs use SB_I_NOUMASK too.
- Now that we have SB_I_NOUMASK, stop checking for SB_POSIXACL in
IS_POSIXACL() if the kernel doesn't have support for it. This is a
very old patch but it's only possible to do this now with the wider
cleanup that was done.
- Follow-up work on fake path handling from last cycle. Citing mostly
from Amir:
When overlayfs was first merged, overlayfs files of regular files
and directories, the ones that are installed in file table, had a
"fake" path, namely, f_path is the overlayfs path and f_inode is
the "real" inode on the underlying filesystem.
In v6.5, we took another small step by introducing of the
backing_file container and the file_real_path() helper. This change
allowed vfs and filesystem code to get the "real" path of an
overlayfs backing file. With this change, we were able to make
fsnotify work correctly and report events on the "real" filesystem
objects that were accessed via overlayfs.
This method works fine, but it still leaves the vfs vulnerable to
new code that is not aware of files with fake path. A recent
example is commit
|
||
|
Masahiro Yamada
|
7f6d8f7e43 |
kbuild: remove ARCH_POSTLINK from module builds
The '%.ko' rule in arch/*/Makefile.postlink does nothing but call the 'true' command. Remove the unneeded code. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de> |
||
|
Linus Torvalds
|
09a4a03c07 |
powerpc fixes for 6.6 #6
- Fix boot crash with FLATMEM since set_ptes() introduction. - Avoid calling arch_enter/leave_lazy_mmu() in set_ptes(). Thanks to: Aneesh Kumar K.V, Erhard Furtner. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmU7cGwTHG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgGbkEACEuf1snnS76YYZgP4DnYg3ODAamSjL esOhFbkBviG9Y+2I0JsNqN4G0VAzydbLD6Ed2VW7gkzNqxYzsYEXrv8/ArxCu9Yb M7lliRo51bQz2hs+H0B8knihaF9e0ABt8EunksPiGpZPkiDA30fW12ZpxTkXNcM5 V01vAtKa+M1DIEXq2UTgu6rzB45Vx/cNt3vgvVtGFnQ3/v4WXANxMllPkFLRl6nK cF8J+xyiULQJ8mRVQ/TAPHOmqrYzVEGFaJ/XXk+KpfHRKdmR74IZI0rYb1DqOznw X9IwDG+Em7QWQFohHjbikY7avrcKbmjw/QnjQ8akQ7A1SqM8wydE4lXjg3X/fxz4 4tYoAaheD5U99zEgbCzM7Qsao6gmNXo4V0jMMD31nl447HIsbMK6Qh7wz8QOTael pgw6S71clHXKQufs/Uz2jFp6m8K6lMYmm+z23WIArYPNgs2vW+zcDPCXrU+c9AM5 yw8t6vupo5Af6KAQXo3H90A5Fsgza3cKtcN7wASMe5AEslYjy9dg3KHUs+ttTXKQ kUqG44DkHOu3gIugrrjHe1dQAOHwSpuGZ0oWJ847K+qL1HY8UNVrJ1Q0zmkEzqR/ 8MFdxciRyelAqInfLpIzuc/GXq8blmx8EVnVzTT9S6qWAHrErznX5OXrdhoLiaZe ZC8zR/F6nmVeSg== =OZrB -----END PGP SIGNATURE----- Merge tag 'powerpc-6.6-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix boot crash with FLATMEM since set_ptes() introduction - Avoid calling arch_enter/leave_lazy_mmu() in set_ptes() Thanks to Aneesh Kumar K.V and Erhard Furtner. * tag 'powerpc-6.6-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Avoid calling arch_enter/leave_lazy_mmu() in set_ptes powerpc/mm: Fix boot crash with FLATMEM |
||
Kan Liang
|
571d91dcad |
perf: Add branch stack counters
Currently, the additional information of a branch entry is stored in a u64 space. With more and more information added, the space is running out. For example, the information of occurrences of events will be added for each branch. Two places were suggested to append the counters. https://lore.kernel.org/lkml/20230802215814.GH231007@hirez.programming.kicks-ass.net/ One place is right after the flags of each branch entry. It changes the existing struct perf_branch_entry. The later ARCH specific implementation has to be really careful to consistently pick the right struct. The other place is right after the entire struct perf_branch_stack. The disadvantage is that the pointer of the extra space has to be recorded. The common interface perf_sample_save_brstack() has to be updated. The latter is much straightforward, and should be easily understood and maintained. It is implemented in the patch. Add a new branch sample type, PERF_SAMPLE_BRANCH_COUNTERS, to indicate the event which is recorded in the branch info. The "u64 counters" may store the occurrences of several events. The information regarding the number of events/counters and the width of each counter should be exposed via sysfs as a reference for the perf tool. Define the branch_counter_nr and branch_counter_width ABI here. The support will be implemented later in the Intel-specific patch. Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20231025201626.3000228-1-kan.liang@linux.intel.com |
||
|
Michael Ellerman
|
303d77a6e1 |
Merge branch 'topic/ppc-kvm' into next
Merge our KVM topic branch, this has been independently included in linux-next for most of the development cycle. |
||
Joerg Roedel
|
3613047280 |
Linux 6.6-rc7
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmU1ngkeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGrsIH/0k/+gdBBYFFdEym foRhKir9WV3ZX4oIozJjA1f7T+qVYclKs6kaYm3gNepRBb6AoG8pdgv4MMAqhYsf QMe2XHi0MrO/qKBgfNfivxEa9jq+0QK5uvTbqCRqCAB8LfwVyDqapCmg3EuiZcPW UbMITmnwLIfXgPxvp9rabmCsTqO6FLbf0GDOVIkNSAIDBXMpcO1iffjrWUbhRa7n oIoiJmWJLcXLxPWDsRKbpJwzw2cIG08YhfQYAiQnC3YaeRm1FKLDIICRBsmfYzja rWv9r4dn4TDfV4/AnjggQnsZvz2yPCxNaFSQIT88nIeiLvyuUTJ9j8aidsSfMZQf xZAbzbA= =NoQv -----END PGP SIGNATURE----- Merge tag 'v6.6-rc7' into core Linux 6.6-rc7 |
||
Jason Gunthorpe
|
e5d8be7406 |
iommu: Move IOMMU_DOMAIN_BLOCKED global statics to ops->blocked_domain
Following the pattern of identity domains, just assign the BLOCKED domain global statics to a value in ops. Update the core code to use the global static directly. Update powerpc to use the new scheme and remove its empty domain_alloc callback. Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Acked-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/1-v2-bff223cf6409+282-dart_paging_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de> |