In eukrea_tlv320_probe(), we need to hold the reference returned
from of_find_compatible_node() which has increased the refcount
and then call of_node_put() with it when done.
Fixes: 66f232908d ("ASoC: eukrea-tlv320: Add DT support.")
Co-authored-by: Kelin Wang <wangkelin2023@163.com>
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220914134354.3995587-1-windhl@126.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use regmap_read_poll_timeout to poll I2S_CLR.
It also fixes the 'rockchip-i2s ff070000.i2s; fail to clear' when
the read of I2S_CLR exceeds the retry limit.
Fixes: 0ff9f8b9f5 ("ASoC: rockchip: i2s: Fix error code when fail to read I2S_CLR")
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20220914031234.2250298-1-judyhsiao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 2848d34c3b ("ASoC: tas2562: Fix mute/unmute") the
following build warning is seen:
sound/soc/codecs/tas2562.c:442:13: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
Fix the warning by returning the 'ret' variable.
Fixes: 2848d34c3b ("ASoC: tas2562: Fix mute/unmute")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220913231706.516849-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In configurations with CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC=n,
gcc warns about an unused variable:
sound/soc/intel/skylake/skl.c: In function ‘probe_codec’:
sound/soc/intel/skylake/skl.c:729:18: error: unused variable ‘skl’ [-Werror=unused-variable]
struct skl_dev *skl = bus_to_skl(bus);
^~~
cc1: all warnings being treated as errors
Fixes: 3fd63658ca ("ASoC: Intel: Drop hdac_ext usage for codec device creation")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220822035133.2147381-1-cuigaosheng1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the case when a codec device is probed before codec analog
controls, snd_soc_register_card() returns -EPROBE_DEFER, resulting in
a misleading error message
sun4i-codec 1c22c00.codec: Failed to register our card
even if the device is probed successfully later. Use dev_err_probe()
to demote the above error to a debug message.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220911145713.55199-1-mike.rudenko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
qcom,q6afe is already documented in soc/qcom/qcom,apr.yaml. The
version-based compatibles ("qcom,q6afe-v<MAJOR-NUMBER>.<MINOR-NUMBER>")
are not used (neither in upstream nor in downstream DTS).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220910090856.49271-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit b3821f7839 ("arm64: dts: mediatek:
kukui: Remove i2s-share properties") which was mistakenly applied
to the ASoC tree.
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixup this warning when CONFIG_PM not defined
linux/sound/soc/codecs/ak4458.c:631:13: error: 'ak4458_reset' defined but\
not used [-Werror=unused-function]
631 | static void ak4458_reset(struct ak4458_priv *ak4458, bool active)
| ^~~~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: e9e7df8899 ("ASoC: ak4458: Remove component probe() and remove()")
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1663057594-29141-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Nícolas F. R. A. Prado <nfraprado@collabora.com>:
The i2s ports on MediaTek SoCs only support a single data lane. In order
to achieve full-duplex operation thus two i2s ports, one for input and
one for output, need to be used together and sharing a single clock from
one of the ports.
This clock sharing setting was previously read by the sound platform
driver from the devicetree, but given that the input/output pairing is
closely related to which codecs are connected to which ports, the
machine sound driver can infer and set it, so that no DT property is
required.
At this point only mt8183-kukui was using the DT property, but given
that this property was never documented, and that the API introduced in
this series makes it obsolete, the undocumented DT property can safely
be removed.
This series adds a function to allow setting the i2s shared clocks,
makes use of it in the machine drivers as required, and removes the no
longer required DT properties and support for them in the drivers, for
all of mt8192, mt8183 and mt8186.
Nícolas F. R. A. Prado (10):
ASoC: mediatek: mt8192: Allow setting shared clocks from machine
driver
ASoC: mediatek: mt8192-mt6359: Make i2s9 share the clock from i2s8
ASoC: mediatek: mt8192: Remove clock share parsing from DT
ASoC: mediatek: mt8183: Allow setting shared clocks from machine
driver
ASoC: mediatek: mt8183: Configure shared clocks
ASoC: mediatek: mt8183: Remove clock share parsing from DT
arm64: dts: mediatek: kukui: Remove i2s-share properties
ASoC: mediatek: mt8186: Allow setting shared clocks from machine
driver
ASoC: mediatek: mt8186: Configure shared clocks
ASoC: mediatek: mt8186: Remove clock share parsing from DT
.../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 5 --
sound/soc/mediatek/mt8183/mt8183-afe-common.h | 3 ++
.../mediatek/mt8183/mt8183-da7219-max98357.c | 33 +++++++++++++
sound/soc/mediatek/mt8183/mt8183-dai-i2s.c | 45 ++++++++---------
.../mt8183/mt8183-mt6358-ts3a227-max98357.c | 33 +++++++++++++
sound/soc/mediatek/mt8186/mt8186-afe-common.h | 3 ++
sound/soc/mediatek/mt8186/mt8186-dai-i2s.c | 44 ++++++++---------
.../mt8186/mt8186-mt6366-da7219-max98357.c | 18 +++++++
.../mt8186/mt8186-mt6366-rt1019-rt5682s.c | 18 +++++++
sound/soc/mediatek/mt8192/mt8192-afe-common.h | 3 ++
sound/soc/mediatek/mt8192/mt8192-dai-i2s.c | 49 ++++++++-----------
.../mt8192/mt8192-mt6359-rt1015-rt5682.c | 9 ++++
12 files changed, 180 insertions(+), 83 deletions(-)
--
2.37.3
If the initialization is not finished, then filling input data to
the FIFO may fail. So it is better to add initialization finishing
check in the runtime resume for suspend & resume case.
And consider the case of three instances working in parallel,
increase the retry times to 50 for more initialization time.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicolinc@gmail.com>
Link: https://lore.kernel.org/r/1662695098-24602-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hdmi-codec.c is using kzalloc(), but we can replace it to
devm_kzalloc() and then, we can remove .remove callback.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/874jxhmjgw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the clock sharing for i2s ports can be configured from the
sound machine driver, remove the logic that was used to parse the
properties from the devicetree.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-11-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i2s0 and i2s1 are paired input/output connected to the same codec and
should share the same clock. Likewise for i2s2 and i2s3. Set the clock
sharing for each pair during the codec's initialization.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-10-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new function to configure the shared clock between two i2s ports,
and export it. This will allow the clock sharing to be set from the
machine driver instead of the devicetree.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-9-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2sN-share properties were never documented in the dt-binding and
thus shouldn't be used. Now that the ASoC machine drivers are setting
the I2S clock sharing internally, these properties are no longer needed,
so remove them.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-8-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the clock sharing for i2s ports can be configured from the
sound machine driver, remove the logic that was used to parse the
properties from the devicetree.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-7-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i2s0 and i2s5 are paired input/output connected to the same codec and
should share the same clock. Likewise for i2s2 and i2s3. Set the clock
sharing for each pair during the DAI initialization.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-6-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new function to configure the shared clock between two i2s ports,
and export it. This will allow the clock sharing to be set from the
machine driver instead of the devicetree.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-5-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the clock sharing for i2s ports can be configured from the
sound machine driver, remove the logic that was used to parse the
properties from the devicetree.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-4-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Both i2s8 and i2s9 are connected to the rt5682 codec and should share
the same clock to work in a full-duplex manner. Set the clock sharing
during the initialization for rt5682.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-3-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new function to configure the shared clock between two i2s ports,
and export it. This will allow the clock sharing to be set from the
machine driver instead of the devicetree.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-2-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the mtrace type for platforms supported by IPC4.
Note: currently only SOF_IPC4_MTRACE_INTEL_CAVS_2 type is supported by
the ipc4-mtrace driver, which is used by CAVS 2.x platforms (ICL, TGL, ADL)
and ACE (MTL).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220909114332.31393-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add implementation of low level, platform dependent IPC4 message handling
and set the DSP ops for IPC4 for ICL platform.
Suggested-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220909114332.31393-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
One of the debugging/logging features for an IPC4 based firmware is the use
of the debug window to deliver log messages to host via the shared SRAM.
The initial implementation of the mtrace supports only TGL/MTL style of
logging, but can be extended to support other types, like APL, SKL, CNL,
etc.
The window is split into 16 'slots' where the first slot contains the
descriptors for the remaining 15 slots.
Each DSP core logs to a separate slot and the slot allocation is not fixed,
we can not assume that the first slot is always used by core0 for example.
The firmware sends LOG_BUFFER_STATUS message when new log batch is
available from one of the cores (after it updated the write_ptr in the
given slot).
Host should update the read_ptr in the same slot when it has taken out log
data.
The patch also updates the sof_ipc4_fw_data struct with parameters needed
for the mtrace to be enabled and used safely.
Co-developed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220909114332.31393-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The debug window for IPC4 compatible firmware is always window #2,
set the debug_box.offset accordingly.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220909114332.31393-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using the index number directly, add a define for the outbox
window index.
It is always window 1 with IPC4.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220909114332.31393-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The LOG_BUFFER_STATUS message includes the ID of the core which updated
its log buffer.
With IPC4 each core logs to a different slot in the debug window.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220909114332.31393-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not print messages when the SOF_DBG_PRINT_DMA_POSITION_UPDATE_LOGS flag
is not set to reduce the amount of prints when the tracing is used.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220909114332.31393-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Most function in ak4458_probe() and ak4458_remove() are
duplicate with dai ops, so remove them and move dsd_path
setting to dai ops.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/1662622316-23426-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return the value regmap_write() and sti_sas_init_sas_registers() directly
instead of storing it in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/20220908010304.342760-1-ye.xingchen@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The Amp is already control in userspace before trigger calibrate function.
Remove unnecessary control in calibrate function and
add condition to check calibration is ready.
Signed-off-by: Steve Lee <steve.lee.analog@gmail.com>
Link: https://lore.kernel.org/r/20220908060359.13606-1-steve.lee.analog@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_link_event_pre_pmu() is using if/else for config->formats
check, but "else" case is for just error.
Unnecessary if/else is not good for readable code. this patch checks
if config->formats was zero as error case.
Moreover, we don't need to indicate config->formats value in error message,
because it is zero. This patch tidyup it, too.
=> if (config->formats) {
...
} else {
dev_warn(w->dapm->dev, "ASoC: Invalid format %llx specified\n",
=> config->formats);
...
}
Link: https://lore.kernel.org/all/YxiDkDOwRsbXeZ17@sirena.org.uk/
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877d2ebn3t.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:
This series fixes Sound Open Firmware support for MT8195 by making
sure that the sound card driver is actually able to probe and IPC
can finally happen.
It is now possible to get DSP support for audio.
Tested on MT8195 Tomato - Acer Chromebook Spin 513 CP513-2H (Pipewire).
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
These are cleanup patches for soc-dapm.c.
Each patches are not related, very random cleanup.
Current snd_soc_dapm_new_control_unlocked() error handling is wrong.
It is using "goto request_failed" (A), but error message is using
"w->name" (B) which is not yet created in such timing.
snd_soc_dapm_new_control_unlocked(xxx)
{
...
switch (w->id) {
case xxx:
...
if (IS_ERR(...)) {
ret = PTR_ERR(...);
(A) goto request_failed;
}
...
}
prefix = soc_dapm_prefix(...);
if (prefix)
(B) w->name = kasprintf(...);
else
(B) w->name = kstrdup_const(...);
...
(A) request_failed:
if (ret != -EPROBE_DEFER)
(B) dev_err(..., w->name, ...);
return ...;
}
we can create "w->name" at beginning of this function.
In such case, we need to call kfree_const(w->name) at error case.
This patch do these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wnah8l7e.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_dai_link_event_pre_pmu() is checking "config".
It is using dev_err() (A) if it was NULL, so we don't need to use
WARN_ON() (B) to check it, it is over-kill. This patch removes it.
(B) if (WARN_ON(!config)) {
(A) dev_err(...);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zgfd8l7s.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/YxeaITtlJexygQo9@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support devicetree by adding a snd_soc_of_mach array, specifying SOF
topologies for a generic MT8195 machine and for Google Tomato
Chromebooks.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220906092727.37324-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the .mailbox_{read,write} generic callbacks for SOF IPC and, while
at it, also change the ipc_msg_data callback to use the SOF API
sof_ipc_msg_data() instead of the custom function mt8195_ipc_msg_data().
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220906092727.37324-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding a probe callback on this snd_soc_card is required when
Sound Open Firmware support is desired, as we need to appropriately
populate the stream_name for SOF to be able to bind widgets.
Failing to do so will produce errors when applying the SOF topology
leading to card registration failure (so, no sound).
While at it, also make sure to fill the topology_shortname as required.
Fixes: 0caf1120c5 ("ASoC: mediatek: mt8195: extract SOF common code")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220906092727.37324-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
