Commit Graph

169127 Commits

Author SHA1 Message Date
Frederic Weisbecker
27026a05bb reiserfs: Fix reiserfs lock <-> i_mutex dependency inversion on xattr
While deleting the xattrs of an inode, we hold the reiserfs lock
and grab the inode->i_mutex of the targeted inode and the root
private xattr directory.

Later on, we may relax the reiserfs lock for various reasons, this
creates inverted dependencies.

We can remove the reiserfs lock -> i_mutex dependency by relaxing
the former before calling open_xa_dir(). This is fine because the
lookup and creation of xattr private directories done in
open_xa_dir() are covered by the targeted inode mutexes. And deeper
operations in the tree are still done under the write lock.

This fixes the following lockdep report:

=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.32-atom #173
-------------------------------------------------------
cp/3204 is trying to acquire lock:
 (&REISERFS_SB(s)->lock){+.+.+.}, at: [<c11432b9>] reiserfs_write_lock_once+0x29/0x50

but task is already holding lock:
 (&sb->s_type->i_mutex_key#4/3){+.+.+.}, at: [<c1141e18>] open_xa_dir+0xd8/0x1b0

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&sb->s_type->i_mutex_key#4/3){+.+.+.}:
       [<c105ea7f>] __lock_acquire+0x11ff/0x19e0
       [<c105f2c8>] lock_acquire+0x68/0x90
       [<c1401a2b>] mutex_lock_nested+0x5b/0x340
       [<c1141d83>] open_xa_dir+0x43/0x1b0
       [<c1142722>] reiserfs_for_each_xattr+0x62/0x260
       [<c114299a>] reiserfs_delete_xattrs+0x1a/0x60
       [<c111ea1f>] reiserfs_delete_inode+0x9f/0x150
       [<c10c9c32>] generic_delete_inode+0xa2/0x170
       [<c10c9d4f>] generic_drop_inode+0x4f/0x70
       [<c10c8b07>] iput+0x47/0x50
       [<c10c0965>] do_unlinkat+0xd5/0x160
       [<c10c0a00>] sys_unlink+0x10/0x20
       [<c1002ec4>] sysenter_do_call+0x12/0x32

-> #0 (&REISERFS_SB(s)->lock){+.+.+.}:
       [<c105f176>] __lock_acquire+0x18f6/0x19e0
       [<c105f2c8>] lock_acquire+0x68/0x90
       [<c1401a2b>] mutex_lock_nested+0x5b/0x340
       [<c11432b9>] reiserfs_write_lock_once+0x29/0x50
       [<c1117012>] reiserfs_lookup+0x62/0x140
       [<c10bd85f>] __lookup_hash+0xef/0x110
       [<c10bf21d>] lookup_one_len+0x8d/0xc0
       [<c1141e2a>] open_xa_dir+0xea/0x1b0
       [<c1141fe5>] xattr_lookup+0x15/0x160
       [<c1142476>] reiserfs_xattr_get+0x56/0x2a0
       [<c1144042>] reiserfs_get_acl+0xa2/0x360
       [<c114461a>] reiserfs_cache_default_acl+0x3a/0x160
       [<c111789c>] reiserfs_mkdir+0x6c/0x2c0
       [<c10bea96>] vfs_mkdir+0xd6/0x180
       [<c10c0c10>] sys_mkdirat+0xc0/0xd0
       [<c10c0c40>] sys_mkdir+0x20/0x30
       [<c1002ec4>] sysenter_do_call+0x12/0x32

other info that might help us debug this:

2 locks held by cp/3204:
 #0:  (&sb->s_type->i_mutex_key#4/1){+.+.+.}, at: [<c10bd8d6>] lookup_create+0x26/0xa0
 #1:  (&sb->s_type->i_mutex_key#4/3){+.+.+.}, at: [<c1141e18>] open_xa_dir+0xd8/0x1b0

stack backtrace:
Pid: 3204, comm: cp Not tainted 2.6.32-atom #173
Call Trace:
 [<c13ff993>] ? printk+0x18/0x1a
 [<c105d33a>] print_circular_bug+0xca/0xd0
 [<c105f176>] __lock_acquire+0x18f6/0x19e0
 [<c105d3aa>] ? check_usage+0x6a/0x460
 [<c105f2c8>] lock_acquire+0x68/0x90
 [<c11432b9>] ? reiserfs_write_lock_once+0x29/0x50
 [<c11432b9>] ? reiserfs_write_lock_once+0x29/0x50
 [<c1401a2b>] mutex_lock_nested+0x5b/0x340
 [<c11432b9>] ? reiserfs_write_lock_once+0x29/0x50
 [<c11432b9>] reiserfs_write_lock_once+0x29/0x50
 [<c1117012>] reiserfs_lookup+0x62/0x140
 [<c105ccca>] ? debug_check_no_locks_freed+0x8a/0x140
 [<c105cbe4>] ? trace_hardirqs_on_caller+0x124/0x170
 [<c10bd85f>] __lookup_hash+0xef/0x110
 [<c10bf21d>] lookup_one_len+0x8d/0xc0
 [<c1141e2a>] open_xa_dir+0xea/0x1b0
 [<c1141fe5>] xattr_lookup+0x15/0x160
 [<c1142476>] reiserfs_xattr_get+0x56/0x2a0
 [<c1144042>] reiserfs_get_acl+0xa2/0x360
 [<c10ca2e7>] ? new_inode+0x27/0xa0
 [<c114461a>] reiserfs_cache_default_acl+0x3a/0x160
 [<c1402eb7>] ? _spin_unlock+0x27/0x40
 [<c111789c>] reiserfs_mkdir+0x6c/0x2c0
 [<c10c7cb8>] ? __d_lookup+0x108/0x190
 [<c105c932>] ? mark_held_locks+0x62/0x80
 [<c1401c8d>] ? mutex_lock_nested+0x2bd/0x340
 [<c10bd17a>] ? generic_permission+0x1a/0xa0
 [<c11788fe>] ? security_inode_permission+0x1e/0x20
 [<c10bea96>] vfs_mkdir+0xd6/0x180
 [<c10c0c10>] sys_mkdirat+0xc0/0xd0
 [<c10505c6>] ? up_read+0x16/0x30
 [<c1002fd8>] ? restore_all_notrace+0x0/0x18
 [<c10c0c40>] sys_mkdir+0x20/0x30
 [<c1002ec4>] sysenter_do_call+0x12/0x32

v2: Don't drop reiserfs_mutex_lock_nested_safe() as we'll still
    need it later

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Christian Kujau <lists@nerdbynature.de>
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
2010-01-02 01:54:47 +01:00
Frederic Weisbecker
c4a62ca362 reiserfs: Warn on lock relax if taken recursively
When we relax the reiserfs lock to avoid creating unwanted
dependencies against others locks while grabbing these,
we want to ensure it has not been taken recursively, otherwise
the lock won't be really relaxed. Only its depth will be decreased.
The unwanted dependency would then actually happen.

To prevent from that, add a reiserfs_lock_check_recursive() call
in the places that need it.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
2010-01-02 01:54:37 +01:00
Frederic Weisbecker
0719d34347 reiserfs: Fix reiserfs lock <-> i_xattr_sem dependency inversion
i_xattr_sem depends on the reiserfs lock. But after we grab
i_xattr_sem, we may relax/relock the reiserfs lock while waiting
on a freezed filesystem, creating a dependency inversion between
the two locks.

In order to avoid the i_xattr_sem -> reiserfs lock dependency, let's
create a reiserfs_down_read_safe() that acts like
reiserfs_mutex_lock_safe(): relax the reiserfs lock while grabbing
another lock to avoid undesired dependencies induced by the
heivyweight reiserfs lock.

This fixes the following warning:

[  990.005931] =======================================================
[  990.012373] [ INFO: possible circular locking dependency detected ]
[  990.013233] 2.6.33-rc1 #1
[  990.013233] -------------------------------------------------------
[  990.013233] dbench/1891 is trying to acquire lock:
[  990.013233]  (&REISERFS_SB(s)->lock){+.+.+.}, at: [<ffffffff81159505>] reiserfs_write_lock+0x35/0x50
[  990.013233]
[  990.013233] but task is already holding lock:
[  990.013233]  (&REISERFS_I(inode)->i_xattr_sem){+.+.+.}, at: [<ffffffff8115899a>] reiserfs_xattr_set_handle+0x8a/0x470
[  990.013233]
[  990.013233] which lock already depends on the new lock.
[  990.013233]
[  990.013233]
[  990.013233] the existing dependency chain (in reverse order) is:
[  990.013233]
[  990.013233] -> #1 (&REISERFS_I(inode)->i_xattr_sem){+.+.+.}:
[  990.013233]        [<ffffffff81063afc>] __lock_acquire+0xf9c/0x1560
[  990.013233]        [<ffffffff8106414f>] lock_acquire+0x8f/0xb0
[  990.013233]        [<ffffffff814ac194>] down_write+0x44/0x80
[  990.013233]        [<ffffffff8115899a>] reiserfs_xattr_set_handle+0x8a/0x470
[  990.013233]        [<ffffffff81158e30>] reiserfs_xattr_set+0xb0/0x150
[  990.013233]        [<ffffffff8115a6aa>] user_set+0x8a/0x90
[  990.013233]        [<ffffffff8115901a>] reiserfs_setxattr+0xaa/0xb0
[  990.013233]        [<ffffffff810e2596>] __vfs_setxattr_noperm+0x36/0xa0
[  990.013233]        [<ffffffff810e26bc>] vfs_setxattr+0xbc/0xc0
[  990.013233]        [<ffffffff810e2780>] setxattr+0xc0/0x150
[  990.013233]        [<ffffffff810e289d>] sys_fsetxattr+0x8d/0xa0
[  990.013233]        [<ffffffff81002dab>] system_call_fastpath+0x16/0x1b
[  990.013233]
[  990.013233] -> #0 (&REISERFS_SB(s)->lock){+.+.+.}:
[  990.013233]        [<ffffffff81063e30>] __lock_acquire+0x12d0/0x1560
[  990.013233]        [<ffffffff8106414f>] lock_acquire+0x8f/0xb0
[  990.013233]        [<ffffffff814aba77>] __mutex_lock_common+0x47/0x3b0
[  990.013233]        [<ffffffff814abebe>] mutex_lock_nested+0x3e/0x50
[  990.013233]        [<ffffffff81159505>] reiserfs_write_lock+0x35/0x50
[  990.013233]        [<ffffffff811340e5>] reiserfs_prepare_write+0x45/0x180
[  990.013233]        [<ffffffff81158bb6>] reiserfs_xattr_set_handle+0x2a6/0x470
[  990.013233]        [<ffffffff81158e30>] reiserfs_xattr_set+0xb0/0x150
[  990.013233]        [<ffffffff8115a6aa>] user_set+0x8a/0x90
[  990.013233]        [<ffffffff8115901a>] reiserfs_setxattr+0xaa/0xb0
[  990.013233]        [<ffffffff810e2596>] __vfs_setxattr_noperm+0x36/0xa0
[  990.013233]        [<ffffffff810e26bc>] vfs_setxattr+0xbc/0xc0
[  990.013233]        [<ffffffff810e2780>] setxattr+0xc0/0x150
[  990.013233]        [<ffffffff810e289d>] sys_fsetxattr+0x8d/0xa0
[  990.013233]        [<ffffffff81002dab>] system_call_fastpath+0x16/0x1b
[  990.013233]
[  990.013233] other info that might help us debug this:
[  990.013233]
[  990.013233] 2 locks held by dbench/1891:
[  990.013233]  #0:  (&sb->s_type->i_mutex_key#12){+.+.+.}, at: [<ffffffff810e2678>] vfs_setxattr+0x78/0xc0
[  990.013233]  #1:  (&REISERFS_I(inode)->i_xattr_sem){+.+.+.}, at: [<ffffffff8115899a>] reiserfs_xattr_set_handle+0x8a/0x470
[  990.013233]
[  990.013233] stack backtrace:
[  990.013233] Pid: 1891, comm: dbench Not tainted 2.6.33-rc1 #1
[  990.013233] Call Trace:
[  990.013233]  [<ffffffff81061639>] print_circular_bug+0xe9/0xf0
[  990.013233]  [<ffffffff81063e30>] __lock_acquire+0x12d0/0x1560
[  990.013233]  [<ffffffff8115899a>] ? reiserfs_xattr_set_handle+0x8a/0x470
[  990.013233]  [<ffffffff8106414f>] lock_acquire+0x8f/0xb0
[  990.013233]  [<ffffffff81159505>] ? reiserfs_write_lock+0x35/0x50
[  990.013233]  [<ffffffff8115899a>] ? reiserfs_xattr_set_handle+0x8a/0x470
[  990.013233]  [<ffffffff814aba77>] __mutex_lock_common+0x47/0x3b0
[  990.013233]  [<ffffffff81159505>] ? reiserfs_write_lock+0x35/0x50
[  990.013233]  [<ffffffff81159505>] ? reiserfs_write_lock+0x35/0x50
[  990.013233]  [<ffffffff81062592>] ? mark_held_locks+0x72/0xa0
[  990.013233]  [<ffffffff814ab81d>] ? __mutex_unlock_slowpath+0xbd/0x140
[  990.013233]  [<ffffffff810628ad>] ? trace_hardirqs_on_caller+0x14d/0x1a0
[  990.013233]  [<ffffffff814abebe>] mutex_lock_nested+0x3e/0x50
[  990.013233]  [<ffffffff81159505>] reiserfs_write_lock+0x35/0x50
[  990.013233]  [<ffffffff811340e5>] reiserfs_prepare_write+0x45/0x180
[  990.013233]  [<ffffffff81158bb6>] reiserfs_xattr_set_handle+0x2a6/0x470
[  990.013233]  [<ffffffff81158e30>] reiserfs_xattr_set+0xb0/0x150
[  990.013233]  [<ffffffff814abcb4>] ? __mutex_lock_common+0x284/0x3b0
[  990.013233]  [<ffffffff8115a6aa>] user_set+0x8a/0x90
[  990.013233]  [<ffffffff8115901a>] reiserfs_setxattr+0xaa/0xb0
[  990.013233]  [<ffffffff810e2596>] __vfs_setxattr_noperm+0x36/0xa0
[  990.013233]  [<ffffffff810e26bc>] vfs_setxattr+0xbc/0xc0
[  990.013233]  [<ffffffff810e2780>] setxattr+0xc0/0x150
[  990.013233]  [<ffffffff81056018>] ? sched_clock_cpu+0xb8/0x100
[  990.013233]  [<ffffffff8105eded>] ? trace_hardirqs_off+0xd/0x10
[  990.013233]  [<ffffffff810560a3>] ? cpu_clock+0x43/0x50
[  990.013233]  [<ffffffff810c6820>] ? fget+0xb0/0x110
[  990.013233]  [<ffffffff810c6770>] ? fget+0x0/0x110
[  990.013233]  [<ffffffff81002ddc>] ? sysret_check+0x27/0x62
[  990.013233]  [<ffffffff810e289d>] sys_fsetxattr+0x8d/0xa0
[  990.013233]  [<ffffffff81002dab>] system_call_fastpath+0x16/0x1b

Reported-and-tested-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
2010-01-02 01:54:04 +01:00
Frederic Weisbecker
98ea3f50bc reiserfs: Fix remaining in-reclaim-fs <-> reclaim-fs-on locking inversion
Commit 500f5a0bf5
(reiserfs: Fix possible recursive lock) fixed a vmalloc under reiserfs
lock that triggered a lockdep warning because of a
IN-FS-RECLAIM <-> RECLAIM-FS-ON locking dependency inversion.

But this patch has ommitted another vmalloc call in the same path
that allocates the journal. Relax the lock for this one too.

Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
2009-12-29 22:34:59 +01:00
Frederic Weisbecker
47376ceba5 reiserfs: Fix reiserfs lock <-> inode mutex dependency inversion
The reiserfs lock -> inode mutex dependency gets inverted when we
relax the lock while walking to the tree.

To fix this, use a specialized version of reiserfs_mutex_lock_safe
that takes care of mutex subclasses. Then we can grab the inode
mutex with I_MUTEX_XATTR subclass without any reiserfs lock
dependency.

This fixes the following report:

[ INFO: possible circular locking dependency detected ]
2.6.32-06793-gf405425-dirty #2
-------------------------------------------------------
mv/18566 is trying to acquire lock:
 (&REISERFS_SB(s)->lock){+.+.+.}, at: [<c1110708>] reiserfs_write_lock+0x28=
/0x40

but task is already holding lock:
 (&sb->s_type->i_mutex_key#5/3){+.+.+.}, at: [<c111033c>]
reiserfs_for_each_xattr+0x10c/0x380

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&sb->s_type->i_mutex_key#5/3){+.+.+.}:
       [<c104f723>] validate_chain+0xa23/0xf70
       [<c1050155>] __lock_acquire+0x4e5/0xa70
       [<c105075a>] lock_acquire+0x7a/0xa0
       [<c134c76f>] mutex_lock_nested+0x5f/0x2b0
       [<c11102b4>] reiserfs_for_each_xattr+0x84/0x380
       [<c1110615>] reiserfs_delete_xattrs+0x15/0x50
       [<c10ef57f>] reiserfs_delete_inode+0x8f/0x140
       [<c10a565c>] generic_delete_inode+0x9c/0x150
       [<c10a574d>] generic_drop_inode+0x3d/0x60
       [<c10a4667>] iput+0x47/0x50
       [<c109cc0b>] do_unlinkat+0xdb/0x160
       [<c109cca0>] sys_unlink+0x10/0x20
       [<c1002c50>] sysenter_do_call+0x12/0x36

-> #0 (&REISERFS_SB(s)->lock){+.+.+.}:
       [<c104fc68>] validate_chain+0xf68/0xf70
       [<c1050155>] __lock_acquire+0x4e5/0xa70
       [<c105075a>] lock_acquire+0x7a/0xa0
       [<c134c76f>] mutex_lock_nested+0x5f/0x2b0
       [<c1110708>] reiserfs_write_lock+0x28/0x40
       [<c1103d6b>] search_by_key+0x1f7b/0x21b0
       [<c10e73ef>] search_by_entry_key+0x1f/0x3b0
       [<c10e77f7>] reiserfs_find_entry+0x77/0x400
       [<c10e81e5>] reiserfs_lookup+0x85/0x130
       [<c109a144>] __lookup_hash+0xb4/0x110
       [<c109b763>] lookup_one_len+0xb3/0x100
       [<c1110350>] reiserfs_for_each_xattr+0x120/0x380
       [<c1110615>] reiserfs_delete_xattrs+0x15/0x50
       [<c10ef57f>] reiserfs_delete_inode+0x8f/0x140
       [<c10a565c>] generic_delete_inode+0x9c/0x150
       [<c10a574d>] generic_drop_inode+0x3d/0x60
       [<c10a4667>] iput+0x47/0x50
       [<c10a1c4f>] dentry_iput+0x6f/0xf0
       [<c10a1d74>] d_kill+0x24/0x50
       [<c10a396b>] dput+0x5b/0x120
       [<c109ca89>] sys_renameat+0x1b9/0x230
       [<c109cb28>] sys_rename+0x28/0x30
       [<c1002c50>] sysenter_do_call+0x12/0x36

other info that might help us debug this:

2 locks held by mv/18566:
 #0:  (&sb->s_type->i_mutex_key#5/1){+.+.+.}, at: [<c109b6ac>]
lock_rename+0xcc/0xd0
 #1:  (&sb->s_type->i_mutex_key#5/3){+.+.+.}, at: [<c111033c>]
reiserfs_for_each_xattr+0x10c/0x380

stack backtrace:
Pid: 18566, comm: mv Tainted: G         C 2.6.32-06793-gf405425-dirty #2
Call Trace:
 [<c134b252>] ? printk+0x18/0x1e
 [<c104e790>] print_circular_bug+0xc0/0xd0
 [<c104fc68>] validate_chain+0xf68/0xf70
 [<c104c8cb>] ? trace_hardirqs_off+0xb/0x10
 [<c1050155>] __lock_acquire+0x4e5/0xa70
 [<c105075a>] lock_acquire+0x7a/0xa0
 [<c1110708>] ? reiserfs_write_lock+0x28/0x40
 [<c134c76f>] mutex_lock_nested+0x5f/0x2b0
 [<c1110708>] ? reiserfs_write_lock+0x28/0x40
 [<c1110708>] ? reiserfs_write_lock+0x28/0x40
 [<c134b60a>] ? schedule+0x27a/0x440
 [<c1110708>] reiserfs_write_lock+0x28/0x40
 [<c1103d6b>] search_by_key+0x1f7b/0x21b0
 [<c1050176>] ? __lock_acquire+0x506/0xa70
 [<c1051267>] ? lock_release_non_nested+0x1e7/0x340
 [<c1110708>] ? reiserfs_write_lock+0x28/0x40
 [<c104e354>] ? trace_hardirqs_on_caller+0x124/0x170
 [<c104e3ab>] ? trace_hardirqs_on+0xb/0x10
 [<c1042a55>] ? T.316+0x15/0x1a0
 [<c1042d2d>] ? sched_clock_cpu+0x9d/0x100
 [<c10e73ef>] search_by_entry_key+0x1f/0x3b0
 [<c134bf2a>] ? __mutex_unlock_slowpath+0x9a/0x120
 [<c104e354>] ? trace_hardirqs_on_caller+0x124/0x170
 [<c10e77f7>] reiserfs_find_entry+0x77/0x400
 [<c10e81e5>] reiserfs_lookup+0x85/0x130
 [<c1042d2d>] ? sched_clock_cpu+0x9d/0x100
 [<c109a144>] __lookup_hash+0xb4/0x110
 [<c109b763>] lookup_one_len+0xb3/0x100
 [<c1110350>] reiserfs_for_each_xattr+0x120/0x380
 [<c110ffe0>] ? delete_one_xattr+0x0/0x1c0
 [<c1003342>] ? math_error+0x22/0x150
 [<c1110708>] ? reiserfs_write_lock+0x28/0x40
 [<c1110615>] reiserfs_delete_xattrs+0x15/0x50
 [<c1110708>] ? reiserfs_write_lock+0x28/0x40
 [<c10ef57f>] reiserfs_delete_inode+0x8f/0x140
 [<c10a561f>] ? generic_delete_inode+0x5f/0x150
 [<c10ef4f0>] ? reiserfs_delete_inode+0x0/0x140
 [<c10a565c>] generic_delete_inode+0x9c/0x150
 [<c10a574d>] generic_drop_inode+0x3d/0x60
 [<c10a4667>] iput+0x47/0x50
 [<c10a1c4f>] dentry_iput+0x6f/0xf0
 [<c10a1d74>] d_kill+0x24/0x50
 [<c10a396b>] dput+0x5b/0x120
 [<c109ca89>] sys_renameat+0x1b9/0x230
 [<c1042d2d>] ? sched_clock_cpu+0x9d/0x100
 [<c104c8cb>] ? trace_hardirqs_off+0xb/0x10
 [<c1042dde>] ? cpu_clock+0x4e/0x60
 [<c1350825>] ? do_page_fault+0x155/0x370
 [<c1041816>] ? up_read+0x16/0x30
 [<c1350825>] ? do_page_fault+0x155/0x370
 [<c109cb28>] sys_rename+0x28/0x30
 [<c1002c50>] sysenter_do_call+0x12/0x36

Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
2009-12-16 23:25:50 +01:00
Frederic Weisbecker
cb1c2e51c5 reiserfs: Fix reiserfs lock and journal lock inversion dependency
When we were using the bkl, we didn't care about dependencies against
other locks, but the mutex conversion created new ones, which is why
we have reiserfs_mutex_lock_safe(), which unlocks the reiserfs lock
before acquiring another mutex.

But this trick actually fails if we have acquired the reiserfs lock
recursively, as we try to unlock it to acquire the new mutex without
inverted dependency, but we eventually only decrease its depth.

This happens in the case of a nested inode creation/deletion.
Say we have no space left on the device, we create an inode
and tak the lock but fail to create its entry, then we release the
inode using iput(), which calls reiserfs_delete_inode() that takes
the reiserfs lock recursively. The path eventually ends up in
journal_begin() where we try to take the journal safely but we
fail because of the reiserfs lock recursion:

[ INFO: possible circular locking dependency detected ]
2.6.32-06486-g053fe57 #2
-------------------------------------------------------
vi/23454 is trying to acquire lock:
 (&journal->j_mutex){+.+...}, at: [<c110dac4>] do_journal_begin_r+0x64/0x2f0

but task is already holding lock:
 (&REISERFS_SB(s)->lock){+.+.+.}, at: [<c11106a8>] reiserfs_write_lock+0x28/0x40

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&REISERFS_SB(s)->lock){+.+.+.}:
       [<c104f8f3>] validate_chain+0xa23/0xf70
       [<c1050325>] __lock_acquire+0x4e5/0xa70
       [<c105092a>] lock_acquire+0x7a/0xa0
       [<c134c78f>] mutex_lock_nested+0x5f/0x2b0
       [<c11106a8>] reiserfs_write_lock+0x28/0x40
       [<c110dacb>] do_journal_begin_r+0x6b/0x2f0
       [<c110ddcf>] journal_begin+0x7f/0x120
       [<c10f76c2>] reiserfs_remount+0x212/0x4d0
       [<c1093997>] do_remount_sb+0x67/0x140
       [<c10a9ca6>] do_mount+0x436/0x6b0
       [<c10a9f86>] sys_mount+0x66/0xa0
       [<c1002c50>] sysenter_do_call+0x12/0x36

-> #0 (&journal->j_mutex){+.+...}:
       [<c104fe38>] validate_chain+0xf68/0xf70
       [<c1050325>] __lock_acquire+0x4e5/0xa70
       [<c105092a>] lock_acquire+0x7a/0xa0
       [<c134c78f>] mutex_lock_nested+0x5f/0x2b0
       [<c110dac4>] do_journal_begin_r+0x64/0x2f0
       [<c110ddcf>] journal_begin+0x7f/0x120
       [<c10ef52f>] reiserfs_delete_inode+0x9f/0x140
       [<c10a55fc>] generic_delete_inode+0x9c/0x150
       [<c10a56ed>] generic_drop_inode+0x3d/0x60
       [<c10a4607>] iput+0x47/0x50
       [<c10e915c>] reiserfs_create+0x16c/0x1c0
       [<c109a9c1>] vfs_create+0xc1/0x130
       [<c109dbec>] do_filp_open+0x81c/0x920
       [<c109004f>] do_sys_open+0x4f/0x110
       [<c1090179>] sys_open+0x29/0x40
       [<c1002c50>] sysenter_do_call+0x12/0x36

other info that might help us debug this:

2 locks held by vi/23454:
 #0:  (&sb->s_type->i_mutex_key#5){+.+.+.}, at: [<c109d64e>]
do_filp_open+0x27e/0x920
 #1:  (&REISERFS_SB(s)->lock){+.+.+.}, at: [<c11106a8>]
reiserfs_write_lock+0x28/0x40

stack backtrace:
Pid: 23454, comm: vi Not tainted 2.6.32-06486-g053fe57 #2
Call Trace:
 [<c134b202>] ? printk+0x18/0x1e
 [<c104e960>] print_circular_bug+0xc0/0xd0
 [<c104fe38>] validate_chain+0xf68/0xf70
 [<c104ca9b>] ? trace_hardirqs_off+0xb/0x10
 [<c1050325>] __lock_acquire+0x4e5/0xa70
 [<c105092a>] lock_acquire+0x7a/0xa0
 [<c110dac4>] ? do_journal_begin_r+0x64/0x2f0
 [<c134c78f>] mutex_lock_nested+0x5f/0x2b0
 [<c110dac4>] ? do_journal_begin_r+0x64/0x2f0
 [<c110dac4>] ? do_journal_begin_r+0x64/0x2f0
 [<c110ff80>] ? delete_one_xattr+0x0/0x1c0
 [<c110dac4>] do_journal_begin_r+0x64/0x2f0
 [<c110ddcf>] journal_begin+0x7f/0x120
 [<c11105b5>] ? reiserfs_delete_xattrs+0x15/0x50
 [<c10ef52f>] reiserfs_delete_inode+0x9f/0x140
 [<c10a55bf>] ? generic_delete_inode+0x5f/0x150
 [<c10ef490>] ? reiserfs_delete_inode+0x0/0x140
 [<c10a55fc>] generic_delete_inode+0x9c/0x150
 [<c10a56ed>] generic_drop_inode+0x3d/0x60
 [<c10a4607>] iput+0x47/0x50
 [<c10e915c>] reiserfs_create+0x16c/0x1c0
 [<c1099a5d>] ? inode_permission+0x7d/0xa0
 [<c109a9c1>] vfs_create+0xc1/0x130
 [<c10e8ff0>] ? reiserfs_create+0x0/0x1c0
 [<c109dbec>] do_filp_open+0x81c/0x920
 [<c104ca9b>] ? trace_hardirqs_off+0xb/0x10
 [<c134dc0d>] ? _spin_unlock+0x1d/0x20
 [<c10a6eea>] ? alloc_fd+0xba/0xf0
 [<c109004f>] do_sys_open+0x4f/0x110
 [<c1090179>] sys_open+0x29/0x40
 [<c1002c50>] sysenter_do_call+0x12/0x36

To fix this, use reiserfs_lock_once() from reiserfs_delete_inode()
which prevents from adding reiserfs lock recursion.

Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
2009-12-14 11:47:11 +01:00
Frederic Weisbecker
500f5a0bf5 reiserfs: Fix possible recursive lock
While allocating the bitmap using vmalloc, we hold the reiserfs lock,
which makes lockdep later reporting a possible deadlock as we may
swap out pages to allocate memory and then take the reiserfs lock
recursively:

inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
kswapd0/312 [HC0[0]:SC0[0]:HE1:SE1] takes:
 (&REISERFS_SB(s)->lock){+.+.?.}, at: [<c11108a8>] reiserfs_write_lock+0x28/0x40
{RECLAIM_FS-ON-W} state was registered at:
  [<c104e1c2>] mark_held_locks+0x62/0x90
  [<c104e28a>] lockdep_trace_alloc+0x9a/0xc0
  [<c108e396>] kmem_cache_alloc+0x26/0xf0
  [<c10850ec>] __get_vm_area_node+0x6c/0xf0
  [<c10857de>] __vmalloc_node+0x7e/0xa0
  [<c108597b>] vmalloc+0x2b/0x30
  [<c10e00b9>] reiserfs_init_bitmap_cache+0x39/0x70
  [<c10f8178>] reiserfs_fill_super+0x2e8/0xb90
  [<c1094345>] get_sb_bdev+0x145/0x180
  [<c10f5a11>] get_super_block+0x21/0x30
  [<c10931f0>] vfs_kern_mount+0x40/0xd0
  [<c10932d9>] do_kern_mount+0x39/0xd0
  [<c10a9857>] do_mount+0x2c7/0x6b0
  [<c10a9ca6>] sys_mount+0x66/0xa0
  [<c161589b>] mount_block_root+0xc4/0x245
  [<c1615a75>] mount_root+0x59/0x5f
  [<c1615b8c>] prepare_namespace+0x111/0x14b
  [<c1615269>] kernel_init+0xcf/0xdb
  [<c10031fb>] kernel_thread_helper+0x7/0x1c

This is actually fine for two reasons: we call vmalloc at mount time
then it's not in the swapping out path. Also the reiserfs lock can be
acquired recursively, but since its implementation depends on a mutex,
it's hard and not necessary worth it to teach that to lockdep.

The lock is useless at mount time anyway, at least until we replay the
journal. But let's remove it from this path later as this needs
more thinking and is a sensible change.

For now we can just relax the lock around vmalloc,

Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
2009-12-14 11:43:09 +01:00
Frederic Weisbecker
6548698f92 Merge commit 'v2.6.32' into reiserfs/kill-bkl
Merge-reason: The tree was based 2.6.31. It's better to be up to date
with 2.6.32. Although no conflicting changes were made in between,
it gives benchmarking results closer to the lastest kernel behaviour.
2009-12-07 07:29:22 +01:00
Linus Torvalds
22763c5cf3 Linux 2.6.32 2009-12-02 19:51:21 -08:00
Julia Lawall
0fdd07f77f VIDEO: Correct use of request_region/request_mem_region
request_region should be used with release_region, not request_mem_region.

Geert Uytterhoeven pointed out that in the case of drivers/video/gbefb.c,
the problem is actually the other way around; request_mem_region should be
used instead of request_region.

The semantic patch that finds/fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r1@
expression start;
@@

request_region(start,...)

@b1@
expression r1.start;
@@

request_mem_region(start,...)

@depends on !b1@
expression r1.start;
expression E;
@@

- release_mem_region
+ release_region
  (start,E)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-02 23:58:32 +00:00
Atsushi Nemoto
dbf763a2f1 SPI: spi_txx9: Fix bit rate calculation
TXx9 SPI bit rate is calculated by:
        fBR = (spi-baseclk) / (n + 1)
Fix calculation of min_speed_hz, max_speed_hz and n.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-02 23:58:32 +00:00
Linus Torvalds
56f3f55cf9 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Correct WM831X_MAX_ISEL_VALUE
2009-12-02 15:41:49 -08:00
Anisse Astier
049e2d13b8 Input: i8042 - add Dell Vostro 1320, 1520 and 1720 to the reset list
These laptops often leave i8042 in a wierd state resulting in non-
operational touchpad and keyboard.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-02 15:41:33 -08:00
Linus Torvalds
0a45281f8e Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
  md: revert incorrect fix for read error handling in raid1.
2009-12-02 15:40:37 -08:00
Rusty Russell
f066a4f6df param: don't complain about unused module parameters.
Jon confirms that recent modprobe will look in /proc/cmdline, so these
cmdline options can still be used.

See http://bugzilla.kernel.org/show_bug.cgi?id=14164

Reported-by: Adam Williamson <awilliam@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-02 15:40:07 -08:00
Linus Torvalds
86a7b7ef54 Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: RB532: Fix devices.c compilation.
  MIPS: Fix MIPS I build.
2009-12-02 15:39:20 -08:00
Linus Torvalds
bbbb45a02b Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [PATCH] rc32434_wdt: fix compilation failure
  [WATCHDOG] rc32434_wdt.c: use resource_size()
2009-12-02 15:38:49 -08:00
Helge Deller
35dead4235 modules: don't export section names of empty sections via sysfs
On the parisc architecture we face for each and every loaded kernel module
this kernel "badness warning":
  sysfs: cannot create duplicate filename '/module/ac97_bus/sections/.text'
  Badness at fs/sysfs/dir.c:487

Reason for that is, that on parisc all kernel modules do have multiple
.text sections due to the usage of the -ffunction-sections compiler flag
which is needed to reach all jump targets on this platform.

An objdump on such a kernel module gives:
Sections:
Idx Name          Size      VMA       LMA       File off  Algn
  0 .note.gnu.build-id 00000024  00000000  00000000  00000034  2**2
                  CONTENTS, ALLOC, LOAD, READONLY, DATA
  1 .text         00000000  00000000  00000000  00000058  2**0
                  CONTENTS, ALLOC, LOAD, READONLY, CODE
  2 .text.ac97_bus_match 0000001c  00000000  00000000  00000058  2**2
                  CONTENTS, ALLOC, LOAD, READONLY, CODE
  3 .text         00000000  00000000  00000000  000000d4  2**0
                  CONTENTS, ALLOC, LOAD, READONLY, CODE
...
Since the .text sections are empty (size of 0 bytes) and won't be
loaded by the kernel module loader anyway, I don't see a reason
why such sections need to be listed under
/sys/module/<module_name>/sections/<section_name> either.

The attached patch does solve this issue by not exporting section
names which are empty.

This fixes bugzilla http://bugzilla.kernel.org/show_bug.cgi?id=14703

Signed-off-by: Helge Deller <deller@gmx.de>
CC: rusty@rustcorp.com.au
CC: akpm@linux-foundation.org
CC: James.Bottomley@HansenPartnership.com
CC: roland@redhat.com
CC: dave@hiauly1.hia.nrc.ca
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-02 15:38:25 -08:00
Linus Torvalds
ebd65a5855 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator: Initialise wm831x structure pointor for ISINK driver
2009-12-02 12:44:42 -08:00
Mark Brown
e8092da92e regulator: Initialise wm831x structure pointor for ISINK driver
The version that made it into mainline missed the initialisation of the
chip handle.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-12-02 19:37:16 +00:00
Florian Fainelli
4e7c81af3f MIPS: RB532: Fix devices.c compilation.
We should now use dev_set_drvdata to set the driver driver_data field.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/747/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-02 18:09:51 +00:00
Ralf Baechle
a91be9ee69 MIPS: Fix MIPS I build.
Broken by d63c63e889bbeeaa461a8addf1245f89f3ce4ece (lmo) rsp.
f1e39a4a61 (kernel.org).

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/746/
2009-12-02 18:09:51 +00:00
Linus Torvalds
6f9a76198f Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
* 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6:
  [ARM] pxamci: call mmc_remove_host() before freeing resources
2009-12-02 08:21:58 -08:00
Daniel Mack
5d6b1edf8c [ARM] pxamci: call mmc_remove_host() before freeing resources
mmc_remove_host() will cause the mmc core to switch off the bus power by
eventually calling pxamci_set_ios(). This function uses the regulator or
the GPIO which have been freed already.

This causes the following Oops on module unload.

[   49.519649] Unable to handle kernel paging request at virtual address 30303a70
[   49.526878] pgd = c7084000
[   49.529563] [30303a70] *pgd=00000000
[   49.533136] Internal error: Oops: 5 [#1]
[   49.537025] last sysfs file: /sys/devices/platform/pxa27x-ohci/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/scsi_level
[   49.547471] Modules linked in: pxamci(-) eeti_ts
[   49.552061] CPU: 0    Not tainted  (2.6.32-rc8 #322)
[   49.557001] PC is at regulator_is_enabled+0x3c/0xbc
[   49.561846] LR is at regulator_is_enabled+0x30/0xbc
[   49.566691] pc : [<c01a2448>]    lr : [<c01a243c>]    psr: 60000013
[   49.566702] sp : c7083e70  ip : 30303a30  fp : 00000000
[   49.578093] r10: c705e200  r9 : c7082000  r8 : c705e2e0
[   49.583280] r7 : c7061340  r6 : c7061340  r5 : c7083e70  r4 : 00000000
[   49.589759] r3 : c04dc434  r2 : c04dc434  r1 : c03eecea  r0 : 00000047
[   49.596241] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[   49.603329] Control: 0000397f  Table: a7084018  DAC: 00000015
[   49.609031] Process rmmod (pid: 1101, stack limit = 0xc7082278)
[   49.614908] Stack: (0xc7083e70 to 0xc7084000)
[   49.619238] 3e60:                                     c7082000 c703c4f8 c705ea00 c04f4074
[   49.627366] 3e80: 00000000 c705e3a0 ffffffff c0247ddc c70361a0 00000000 c705e3a0 ffffffff
[   49.635499] 3ea0: c705e200 bf006400 c78c4f00 c705e200 c705e3a0 ffffffff c705e200 ffffffff
[   49.643633] 3ec0: c04d8ac8 c02476d0 ffffffff c0247c60 c705e200 c0248678 c705e200 c0249064
[   49.651765] 3ee0: ffffffff bf006204 c04d8ad0 c04d8ad0 c04d8ac8 bf007490 00000880 c00440c4
[   49.659898] 3f00: 0000b748 c01c5708 bf007490 c01c44c8 c04d8ac8 c04d8afc bf007490 c01c4570
[   49.668031] 3f20: bf007490 bf00750c c04f4258 c01c37a4 00000000 bf00750c c7083f44 c007b014
[   49.676162] 3f40: 4000d000 6d617870 08006963 00000001 00000000 c7085000 00000001 00000000
[   49.684287] 3f60: 4000d000 c7083f8c 00000001 bea01a54 00005401 c7ab1400 c00440c4 00082000
[   49.692420] 3f80: bf00750c 00000880 c7083f8c 00000000 4000cfa8 00000000 00000880 bea01cc8
[   49.700552] 3fa0: 00000081 c0043f40 00000000 00000880 bea01cc8 00000880 00000006 00000000
[   49.708677] 3fc0: 00000000 00000880 bea01cc8 00000081 00000097 0000cca4 0000b748 00000000
[   49.716802] 3fe0: 4001a4f0 bea01cc0 00018bf4 4001a4fc 20000010 bea01cc8 a063e021 a063e421
[   49.724958] [<c01a2448>] (regulator_is_enabled+0x3c/0xbc) from [<c0247ddc>] (mmc_regulator_set_ocr+0x14/0xd8)
[   49.734836] [<c0247ddc>] (mmc_regulator_set_ocr+0x14/0xd8) from [<bf006400>] (pxamci_set_ios+0xd8/0x17c [pxamci])
[   49.745044] [<bf006400>] (pxamci_set_ios+0xd8/0x17c [pxamci]) from [<c02476d0>] (mmc_power_off+0x50/0x58)
[   49.754555] [<c02476d0>] (mmc_power_off+0x50/0x58) from [<c0247c60>] (mmc_detach_bus+0x68/0xc4)
[   49.763207] [<c0247c60>] (mmc_detach_bus+0x68/0xc4) from [<c0248678>] (mmc_stop_host+0xd4/0x1bc)
[   49.771944] [<c0248678>] (mmc_stop_host+0xd4/0x1bc) from [<c0249064>] (mmc_remove_host+0xc/0x20)
[   49.780681] [<c0249064>] (mmc_remove_host+0xc/0x20) from [<bf006204>] (pxamci_remove+0xc8/0x174 [pxamci])
[   49.790211] [<bf006204>] (pxamci_remove+0xc8/0x174 [pxamci]) from [<c01c5708>] (platform_drv_remove+0x1c/0x24)
[   49.800164] [<c01c5708>] (platform_drv_remove+0x1c/0x24) from [<c01c44c8>] (__device_release_driver+0x7c/0xc4)
[   49.810110] [<c01c44c8>] (__device_release_driver+0x7c/0xc4) from [<c01c4570>] (driver_detach+0x60/0x8c)
[   49.819535] [<c01c4570>] (driver_detach+0x60/0x8c) from [<c01c37a4>] (bus_remove_driver+0x90/0xcc)
[   49.828452] [<c01c37a4>] (bus_remove_driver+0x90/0xcc) from [<c007b014>] (sys_delete_module+0x1d8/0x254)
[   49.837891] [<c007b014>] (sys_delete_module+0x1d8/0x254) from [<c0043f40>] (ret_fast_syscall+0x0/0x28)
[   49.847145] Code: eb06c53a e596c030 e1a0500d e59f106c (e59c0040)
[   49.853566] ---[ end trace b5fa66a00cea142f ]---

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Reported-by: Sven Neumann <s.neumann@raumfeld.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: linux-mmc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: stable@kernel.org
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-02 22:58:19 +08:00
Florian Fainelli
810a90ae4d [PATCH] rc32434_wdt: fix compilation failure
This patch fixes the compilation failure of
rc32434 due to a bad module parameter description.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-12-02 12:47:24 +00:00
H Hartley Sweeten
be088b139f [WATCHDOG] rc32434_wdt.c: use resource_size()
The size value passed to ioremap_nocache() is not correct.
Use resource_size() to get the correct value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-12-02 10:10:27 +00:00
Randy Dunlap
e9438e3193 sysfs: fix SYSFS_DEPRECATED_V2 prompt
The SYSFS_DEPRECATED_V2 says "remove" older, deprecated features, but it
actually enables them, so correct this confusing, backwards text.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01 16:32:20 -08:00
Johannes Weiner
cb8799eedd rtc-x1205: reset clock to sane state after power failure
When detecting power failure, the probe function would reset the clock
time to defined state.

However, the clock's _date_ might still be bogus and a subsequent probe
fails when sanity-checking these values.

Change the power-failure fixup code to do a full setting of rtc_time,
including a valid date.

Signed-off-by: Johannes Weiner <jw@emlix.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01 16:32:20 -08:00
Johannes Weiner
48a7f77468 rtc-x1205: fix rtc_time to y2k register value conversion
The possible CCR_Y2K register values are 19 or 20 and struct rtc_time's
tm_year is in years since 1900.

The function translating rtc_time to register values assumes tm_year to be
years since first christmas, though, and we end up storing 0 or 1 in the
CCR_Y2K register, which the hardware does not refuse to do.

A subsequent probing of the clock fails due to the invalid value range in
the register, though.

[ And if it didn't, reading the clock would yield a bogus year because
  the function translating registers to tm_year is assuming a register
  value of 19 or 20. ]

This fixes the conversion from years since 1900 in tm_year to the
corresponding CCR_Y2K value of 19 or 20.

Signed-off-by: Johannes Weiner <jw@emlix.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01 16:32:20 -08:00
Peter Horton
0a1f127a05 aoe: prevent cache aliases
Prevent the AoE block driver from creating cache aliases of page cache
pages on machines with virtually indexed caches.

Building kernels on an AT91SAM9G20 board without this patch fails with
segmentation faults after a couple of passes.

Signed-off-by: Peter Horton <zero@colonel-panic.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01 16:32:20 -08:00
Alek Du
ca0297015d gpio: Langwell GPIO driver bugfixes
- Remove wrong and unnecessary unmask operation

- Remove extra GEDR reading

This fixes the loss of interrupts which occurs when two or more pins are
triggered in close succession.

Signed-off-by: Alek Du <alek.du@intel.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01 16:32:19 -08:00
Sam Ravnborg
974348435c kbuild: stepping down as maintainer
It has been fun but the last year or more it has been a duty and a burden.
So I leave it open for others to take over.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Anibal Monsalve Salazar <anibal@debian.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01 16:32:19 -08:00
Sudhakar Rajashekhara
3510b8f7f5 davinci: fb: fix frame buffer driver issues
Following issues have been addressed on DA8XX/OMAP-L1XX:

a. Screen misalignment during booting when frame buffer console is
   enabled.

b. Driver was configured always in PSEUDOCOLOR mode.  This patch
   dynamically configures the driver either in PSEUDOCOLOUR or TRUECOLOR
   mode depending on bpp.

c. The RED and BLUE offsets were interchanged resulting in wrong
   bootup logo colour.

This patch has been tested on DA830/OMAP-L137 and DA850/OMAP-L138 EVMs.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: Steve Chen <schen@mvista.com>
Cc: Pavel Kiryukhin <pkiryukhin@ru.mvista.com>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01 16:32:19 -08:00
Dan Carpenter
fa00e106eb drivers/rtc/rtc-pcf50633.c: fix use after free in pcf50633_rtc_probe()
"rtc" is freed and then dereferenced on the next line.  This patch fixes
that.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01 16:32:19 -08:00
Andrew Morton
4c4cb1b160 drivers/media/dvb/dvb-core/dvb_frontend.c: needs semaphore.h
Fixes:

  v4l/dvb_frontend.c: In function 'dvb_frontend_stop':
  v4l/dvb_frontend.c:707: error: implicit declaration of function 'init_MUTEX'

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14609

Reported-by: <tstrelar@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01 16:32:19 -08:00
Linus Torvalds
2127816366 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: update TODO files
  Staging: hv: Fix some missing author names
  Staging: hv: Fix vmbus event handler bug
  Staging: hv: Fix argument order in incorrect memset invocations in hyperv driver.
2009-12-01 10:41:40 -08:00
Linus Torvalds
e272a18643 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: Add support for Mobilcom Debitel USB UMTS Surf-Stick to option driver
  USB: work around for EHCI with quirky periodic schedules
  USB: musb: Fix CPPI IRQs not being signaled
  USB: musb: respect usb_request->zero in control requests
  USB: musb: fix ISOC Tx programming for CPPI DMAs
  USB: musb: Remove unwanted message in boot log
  usb: amd5536udc: fixed shared interrupt bug and warning oops
  USB: ftdi_sio: Keep going when write errors are encountered.
  USB: musb_gadget: fix STALL handling
  USB: EHCI: don't send Clear-TT-Buffer following a STALL
2009-12-01 10:41:05 -08:00
Linus Torvalds
e8ed34ced1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  tty/of_serial: add missing ns16550a id
  bcm63xx_uart: Fix serial driver compile breakage.
  tty_port: handle the nonblocking open of a dead port corner case
2009-12-01 10:40:51 -08:00
Linus Torvalds
0d9ccfe1b5 Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: Loongson: Switch from flatmem to sparsemem
  MIPS: Loongson: Disallow 4kB pages
  MIPS: Add missing definition for MADV_HWPOISON.
  MIPS: Fix build error if __xchg() is not getting inlined.
  MIPS: IP22/IP28 Disable early printk to fix boot problems on some systems.
2009-12-01 08:26:44 -08:00
Wu Zhangjin
f133f22dd6 MIPS: Loongson: Switch from flatmem to sparsemem
With flatmem hibernation for Loongson will fail, and there are also some
other problems such as broken files when using NFS or CIFS / Samba.

The config help of sparsemem says:

"This option provides some potential performance benefits, along with
decreased code complexity."

So to avoid the potential problems of FLATMEM, we disable FLATMEM directly
and use SPARSEMEM instead.

Related email thread:

http://groups.google.com/group/loongson-dev/browse_thread/thread/b6b65890ec2b0f24/feb43e5aa7f55d9b?show_docid=feb43e5aa7f55d9b

Reported-by: Tatu Kilappa <tatu.kilappa@gmail.com>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/737/
Cc: linux-mips@linux-mips.org
Cc: zhangfx@lemote.com
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-01 16:21:26 +00:00
Wu Zhangjin
315fe625f8 MIPS: Loongson: Disallow 4kB pages
Currently, with PAGE_SIZE_4KB, the kernel for loongson will hang on:

Kernel panic - not syncing: Attempted to kill init!

The possible reason is the cache aliases problem:

Loongson 2F has 64kb, 4 way L1 Cache, the way size is 16kb, which is bigger
then 4kb. so, If using 4kb page size, there is cache aliases problem.
To avoid this kind of problem, extra cache flushing.  The 2nd possible
solution is 16kb page size which avoids cache aliases without the need for
extra cache flushes.  So we disable 4kB pages until the aliasing issue is
solved.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/736/
Cc: linux-mips@linux-mips.org
Cc: zhangfx@lemote.com
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-01 16:21:26 +00:00
Ralf Baechle
e1eb3a983b MIPS: Add missing definition for MADV_HWPOISON.
Thanks to Joseph S. Myers for reporting this.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: "Joseph S. Myers" <joseph@codesourcery.com>
Patchwork: http://patchwork.linux-mips.org/patch/723/
2009-12-01 16:21:25 +00:00
Ralf Baechle
c677189af9 MIPS: Fix build error if __xchg() is not getting inlined.
If __xchg() is not getting inlined the outline version of the function
will have a reference to __xchg_called_with_bad_pointer() which does not
exist remaining.  Fixed by using BUILD_BUG_ON() to check for allowable
operand sizes.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/705/
2009-12-01 16:21:25 +00:00
Martin Michlmayr
2b5e63f6b8 MIPS: IP22/IP28 Disable early printk to fix boot problems on some systems.
Some Debian users have reported that the kernel hangs early during boot on
some IP22 systems.  Thomas Bogendoerfer found that this is due to a "bad
interaction between CONFIG_EARLY_PRINTK and overwritten prom memory during
early boot".  Since there's no fix yet, disable CONFIG_EARLY_PRINTK for now.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Cc: linux-mips@linux-mips.org
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/702/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-01 16:21:25 +00:00
David Howells
f13a48bd79 SLOW_WORK: Move slow_work's proc file to debugfs
Move slow_work's debugging proc file to debugfs.

Signed-off-by: David Howells <dhowells@redhat.com>
Requested-and-acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01 08:20:31 -08:00
Linus Torvalds
df87f8c06c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
  alpha: Fixup last users of irq_chip->typename
  Alpha: Rearrange thread info flags fixing two regressions
  arch/alpha/kernel: Add kmalloc NULL tests
  arch/alpha/kernel/sys_ruffian.c: Use DIV_ROUND_CLOSEST
2009-12-01 07:36:23 -08:00
Marc Dionne
3350b2acdd CacheFiles: Update IMA counters when using dentry_open
When IMA is active, using dentry_open without updating the
IMA counters will result in free/open imbalance errors when
fput is eventually called.

Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01 07:35:11 -08:00
David Howells
fa1dae4906 SLOW_WORK: Fix the CONFIG_MODULES=n case
Commits 3d7a641 ("SLOW_WORK: Wait for outstanding work items belonging to a
module to clear") introduced some code to make sure that all of a module's
slow-work items were complete before that module was removed, and commit
3bde31a ("SLOW_WORK: Allow a requeueable work item to sleep till the thread is
needed") further extended that, breaking it in the process if CONFIG_MODULES=n:

    CC      kernel/slow-work.o
  kernel/slow-work.c: In function 'slow_work_execute':
  kernel/slow-work.c:313: error: 'slow_work_thread_processing' undeclared (first use in this function)
  kernel/slow-work.c:313: error: (Each undeclared identifier is reported only once
  kernel/slow-work.c:313: error: for each function it appears in.)
  kernel/slow-work.c: In function 'slow_work_wait_for_items':
  kernel/slow-work.c:950: error: 'slow_work_unreg_sync_lock' undeclared (first use in this function)
  kernel/slow-work.c:951: error: 'slow_work_unreg_wq' undeclared (first use in this function)
  kernel/slow-work.c:961: error: 'slow_work_unreg_work_item' undeclared (first use in this function)
  kernel/slow-work.c:974: error: 'slow_work_unreg_module' undeclared (first use in this function)
  kernel/slow-work.c:977: error: 'slow_work_thread_processing' undeclared (first use in this function)
  make[1]: *** [kernel/slow-work.o] Error 1

Fix this by:

 (1) Extracting the bits of slow_work_execute() that are contingent on
     CONFIG_MODULES, and the bits that should be, into inline functions and
     placing them into the #ifdef'd section that defines the relevant variables
     and adding stubs for moduleless kernels.  This allows the removal of some
     #ifdefs.

 (2) #ifdef'ing out the contents of slow_work_wait_for_items() in moduleless
     kernels.

The four functions related to handling module unloading synchronisation (and
their associated variables) could be offloaded into a separate .c file, but
each function is only used once and three of them are tiny, so doing so would
prevent them from being inlined.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01 07:35:11 -08:00
David Howells
6f05416432 9p: fix build breakage introduced by FS-Cache
While building 2.6.32-rc8-git2 for Fedora I noticed the following thinko
in commit 201a15428b ("FS-Cache: Handle
pages pending storage that get evicted under OOM conditions"):

  fs/9p/cache.c: In function '__v9fs_fscache_release_page':
  fs/9p/cache.c:346: error: 'vnode' undeclared (first use in this function)
  fs/9p/cache.c:346: error: (Each undeclared identifier is reported only once
  fs/9p/cache.c:346: error: for each function it appears in.)
  make[2]: *** [fs/9p/cache.o] Error 1

Fix the 9P filesystem to correctly construct the argument to
fscache_maybe_release_page().

Signed-off-by: Kyle McMartin <kyle@redhat.com>
Signed-off-by: Xiaotian Feng <dfeng@redhat.com> [from identical patch]
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [from identical patch]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01 07:35:11 -08:00
Mark Brown
7716977b6a mfd: Correct WM831X_MAX_ISEL_VALUE
There was confusion between the array size and the highest ISEL
value possible.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-01 11:24:19 +01:00