Commit Graph

198 Commits

Author SHA1 Message Date
Stephen Hemminger
25d82d7a2f sky2: dual port NAPI problem
Shutting down port 0 disables the NAPI poll used by both ports.
The long term fix will be to separate NAPI object from net device
until then just reenable if needed.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 16:36:42 -05:00
Stephen Hemminger
0efdf26266 [PATCH] sky2: sparse warnings
Get rid of sparse warnings in sky2 driver because of mixed enum
usage.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-07 04:59:20 -05:00
Stephen Hemminger
c3905bc4b7 [PATCH] sky2: receive queue watermark tweak
This patch makes the receive performance on some systems go from
714MB/s to 941MB/s. It adjusts the watermark of the receive queue
to be lower, thereby avoiding excess hardware flow control. This is
most important on the systems which have little/no additional buffering.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-07 04:58:33 -05:00
Stephen Hemminger
6771290102 [PATCH] sky2: beter ram buffer partitioning
Different chips have different sizes of ram buffers, and some versions have
no ram buffer at all!.  Be more careful about sizing the ram usage because
it maybe a problem if vendor keeps changing sizes.

There is the (unlikely) possibility that some of the errors on some of the
chips have been caused by partitioning not on a 1K boundary.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-07 04:58:33 -05:00
Stephen Hemminger
e5b74c7ddd [PATCH] sky2: add comments to PCI ids
Add comments to sky2 driver to show relationship between PCI id and
hardware.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-07 04:58:33 -05:00
Stephen Hemminger
2a45b49c30 [PATCH] sky2: add PCI for 88ec033
Add another new/missing pci id for 88ec033 chip.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-07 04:58:32 -05:00
Al Viro
ff1dcadb1b [NET]: Split skb->csum
... into anonymous union of __wsum and __u32 (csum and csum_offset resp.)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:27:18 -08:00
Stephen Hemminger
b0a20ded56 [PATCH] sky2: msi enhancements.
If using Message Signaled Interrupts (MSI) then the IRQ will never
be shared. Don't call pci_disable_msi() unless using MSI.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02 00:22:30 -05:00
Stephen Hemminger
794b2bd20f [PATCH] sky2: kfree_skb_any needed
It is possible for the sky2 driver NAPI poll routine to be called with
IRQ's disabled if netpoll is trying to make space in the tx queue. This
is an obscure path, but if it happens, the kfree_skb needs to happen
via softirq. Calling kfree_skb with IRQ's disabled is a not allowed.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02 00:22:29 -05:00
Stephen Hemminger
8df9a87604 [PATCH] sky2: fixes for Yukon EC_U chip revisions
Update workarounds for 88E803X based on the latest SysKonnect vendor
driver version (8.41). Tested on EC_U rev A1, only.
These up the receive performance.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02 00:22:29 -05:00
Stephen Hemminger
508f89e75a [PATCH] sky2: add Dlink 560SX id
Add new PCI ID for DLink 560SX.
This from the latest SysKonnect vendor driver (version 8.41).

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02 00:22:29 -05:00
Stephen Hemminger
5df791117a [PATCH] sky2: receive error handling fix
If sky2 detects out of memory, or gets a bad frame, it reuses the same receive
buffer, but forgets to poke the hardware. This could lead to the receiver
getting stuck if there were lots of errors.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02 00:22:29 -05:00
Stephen Hemminger
0ca43235b3 [PATCH] sky2: netpoll on dual port cards
The sky2 driver uses a single NAPI poll routine for both ports on dual ported
cards (because there is a single IRQ and status ring). Netpoll makes assumptions
about the relationship between network device and NAPI that aren't correct
on the second port, this will cause the port to never clear work.

Most systems, just have single port, so not a big issue.
The easy fix is just make the second port, not netpoll capable.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31 20:22:06 -05:00
Stephen Hemminger
798b6b19d7 [PATCH] skge, sky2, et all. gplv2 only
I don't want my code to downgraded to GPLv3 because of
cut-n-pasted the comments. These files which I hold copyright
on were started before it was clear what GPLv3 was going to be.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31 20:22:06 -05:00
Stephen Hemminger
470ea7eba4 [PATCH] sky2: 88E803X transmit lockup
The reason sky2 driver was locking up on transmit on the Yukon-FE chipset
is that it was misconfiguring the internal RAM buffer so the transmitter
and receiver were sharing the same space.

The code assumed there was 16K of RAM on Yukon-FE (taken from vendor driver
sk98lin which is even more f*cked up on this). Then it assigned based on that.
The giveaway was that the registers would only hold 9bits so both RX/TX
had 0..1ff for space. It is a wonder it worked at all!

This patch addresses this, and fixes an easily reproducible hang on Transmit.
Only the Yukon-FE chip is Marvell 88E803X (10/100 only) are affected.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-21 14:08:24 -04:00
Stephen Hemminger
a052b52f4b sky2: accept multicast pause frames
When using flow control, the PHY needs to accept multicast pause frames.
Without this fix, these frames were getting discarded by the PHY before
doing any flow control.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-10-17 10:24:23 -07:00
Stephen Hemminger
52c89cac67 sky2: version 1.9
Mark version, this has been a lot of patches.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-10-17 10:24:18 -07:00
Stephen Hemminger
b6d7773462 sky2: no message on rx fifo overflow
Under high load it is possible to make the receiver FIFO get overloaded.
The driver/hardware recover properly, so there is no reason to fill the log
with lots of extra messages, just update counter.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-10-17 10:24:16 -07:00
Stephen Hemminger
16ad91e1c6 sky2: flow control setting fixes
The result of flow control negotiation should not limit the next
negotiatition. If board is plugged into an old half duplex 10Mbit port,
without pause, then replugged into a gigabit port, it should negotiate
what is desired, not inherit that last negotiation.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-10-17 10:24:13 -07:00
Stephen Hemminger
7800fddcd0 sky2: don't reset PHY twice
Don't need to reset PHY twice on startup.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-10-17 10:24:10 -07:00
Stephen Hemminger
7c74ac1c23 sky2: use duplex result bits
The result of duplex negotiation is avaliable in the phy status
register, so use that to simplify code and avoid rereading the PHY.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-10-17 10:24:08 -07:00
Stephen Hemminger
709c6e7bb0 sky2: fiber pause bits
The advertisement bits for flow control are located in
different location on fiber (1000baseX)

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-10-17 10:24:04 -07:00
Stephen Hemminger
ebc646f681 sky2: phy irq on shutdown
When PHY is turned off on shutdown, it causes the IRQ to get stuck on.
Make sure and disable the IRQ first, and if IRQ occurs when device
is not running, don't access PHY because that will hang.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-10-17 10:23:56 -07:00
Stephen Hemminger
e561a83be5 sky2: turn of workaround timer
The workaround timer is not needed in most systems with proper IRQ
routing and by perodically waking up it adds to laptop power consumption.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-10-17 10:20:51 -07:00
Stephen Hemminger
2bffc23a01 sky2: MSI test is only a warning
Some motherboards don't implement MSI correctly. The driver handles this
but the warning is too verbose and overly cautious.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-10-17 10:17:18 -07:00
Stephen Hemminger
6e532cfe49 [PATCH] sky2: set lower pause threshold to prevent overrun
Adjust the pause threshold on slower systems to keep from getting overrun.
Since FIFO is 2K bytes, don't send XON pause until there is space for a full
frame.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-11 04:07:45 -04:00
Stephen Hemminger
7bd656d121 [PATCH] sky2: revert pci express extensions
The pci express error handling extensions don't work unless PCI access is via
mmconfig. Otherwise, all accesses to pci config registers greater than 256 fail.
Since the sky2 driver has other ways of getting to PCI config space, it works
around this short coming, but the pci_find_ext_capablity doesn't work.

This backs out commit 91aeb3edbc
Go back to hardcoding, since we know where the error registers are anyway.
Fixes  http://bugzilla.kernel.org/show_bug.cgi?id=7222

Signed-off-by: Stephen Hemminger <shemmminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-11 04:07:45 -04:00
Jeff Garzik
24fcbacedb Merge branch 'master' into upstream-fixes 2006-10-11 03:56:12 -04:00
David Howells
7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Stephen Hemminger
489b10c1f6 [PATCH] sky2: incorrect length on receive packets
The previous change to do fragmented receive (post 2.6.18) introduced a bug
where packets are passed up with size set to the size of the receive buffer
not the actual received data.  IP silently trims this so it didn't show up
right away.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-05 06:43:23 -04:00
Stephen Hemminger
c73a29da23 [PATCH] sky2: version 1.9
Version 1.9 is for 2.6.19.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-27 17:56:32 -04:00
Stephen Hemminger
14d0263fea [PATCH] sky2: fragmented receive for large MTU
Use hardware support for chained receive to break up large frames
into multiple pages. This avoids having to do a mult-page allocation
that can fail on a busy system due to fragmented memory.

For normal size MTU, this code behaves the same.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-27 17:56:31 -04:00
Stephen Hemminger
2bb8c26242 [PATCH] sky2: use netif_tx_lock instead of LLTX
Use the netdevice transmit lock via netif_tx_lock rather than putting
lock in device specific code and using lockless transmit.  The code is
cleaner using netif_tx_lock, and the performance is same.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-27 17:56:31 -04:00
Stephen Hemminger
291ea6142b [PATCH] sky2: incremental transmit completion
Since a transmit can take several control blocks, the old code waited
until the last control block was marked as done. This code processes
the return values incrementally. This makes slots in the tx ring available
and less chance of getting stuck.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-27 17:56:31 -04:00
Stephen Hemminger
9fa1b1f33c [PATCH] sky2: name irq after eth for irqbalance
Use the ethernet device name when requesting the irq because the
irqbalance daemon looks for the name when deciding policy.
Better to play along with this dubious heuristic.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-27 17:56:31 -04:00
Stephen Hemminger
c2716fb407 [PATCH] sky2: workarounds for some 88e806x chips
Workarounds for 88e806x chips from the vendor driver.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-27 17:56:31 -04:00
Stephen Hemminger
91aeb3edbc [PATCH] sky2: use standard pci register capabilties for error register
Use the standard pci capability mechanism to access PCI express error
registers, rather than hard coding the offset. Mask off the PCI express
error from ever occuring on non-PCI express systems.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-27 17:56:31 -04:00
Stephen Hemminger
e0ed545903 [PATCH] sky2: gigabit full duplex negotiation
Look at the registers correctly, when doing gigabit full duplex.
Need to look for link partner result.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-27 17:56:31 -04:00
Linus Torvalds
a319a2773a Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (217 commits)
  net/ieee80211: fix more crypto-related build breakage
  [PATCH] Spidernet: add ethtool -S (show statistics)
  [NET] GT96100: Delete bitrotting ethernet driver
  [PATCH] mv643xx_eth: restrict to 32-bit PPC_MULTIPLATFORM
  [PATCH] Cirrus Logic ep93xx ethernet driver
  r8169: the MMIO region of the 8167 stands behin BAR#1
  e1000, ixgb: Remove pointless wrappers
  [PATCH] Remove powerpc specific parts of 3c509 driver
  [PATCH] s2io: Switch to pci_get_device
  [PATCH] gt96100: move to pci_get_device API
  [PATCH] ehea: bugfix for register access functions
  [PATCH] e1000 disable device on PCI error
  drivers/net/phy/fixed: #if 0 some incomplete code
  drivers/net: const-ify ethtool_ops declarations
  [PATCH] ethtool: allow const ethtool_ops
  [PATCH] sky2: big endian
  [PATCH] sky2: fiber support
  [PATCH] sky2: tx pause bug fix
  drivers/net: Trim trailing whitespace
  [PATCH] ehea: IBM eHEA Ethernet Device Driver
  ...

Manually resolved conflicts in drivers/net/ixgb/ixgb_main.c and
drivers/net/sky2.c related to CHECKSUM_HW/CHECKSUM_PARTIAL changes by
commit 84fa7933a3 that just happened to be
next to unrelated changes in this update.
2006-09-24 10:15:13 -07:00
Patrick McHardy
84fa7933a3 [NET]: Replace CHECKSUM_HW by CHECKSUM_PARTIAL/CHECKSUM_COMPLETE
Replace CHECKSUM_HW by CHECKSUM_PARTIAL (for outgoing packets, whose
checksum still needs to be completed) and CHECKSUM_COMPLETE (for
incoming packets, device supplied full checksum).

Patch originally from Herbert Xu, updated by myself for 2.6.18-rc3.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:53:53 -07:00
Jeff Garzik
7282d491ec drivers/net: const-ify ethtool_ops declarations
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 14:30:00 -04:00
Stephen Hemminger
f65b138ca9 [PATCH] sky2: big endian
Fix support for big endian platforms like PPC.
Still not sure about VLAN acceleration (does it need swapping)?

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:27:44 -04:00
Stephen Hemminger
b89165f2b7 [PATCH] sky2: fiber support
Fix the support for fiber connected gigabit boards.
Allow half duplex gigabit to be configured.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:27:44 -04:00
Stephen Hemminger
2eaba1a280 [PATCH] sky2: tx pause bug fix
Fix problems with transmit pause frames. The driver was telling the
GMAC to flush (not process) pause frames. Manually disabling pause wasn't
working because of problems in the setup.

This maybe the cause of the lockup under load.
	http://bugzilla.kernel.org/show_bug.cgi?id=6839

Patch against netdev-2.6 git tree

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:27:44 -04:00
Stephen Hemminger
2f4a66ad49 [PATCH] sky2: more pci device id's
Some more Marvell device id's, these are from the latest SysKonnect
vendor driver version of sk98lin (8.36).

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-06 11:10:50 -04:00
shemminger@osdl.org
e981d47b9f [PATCH] sky2: version 1.7
Change version number for this bundle.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-29 17:18:30 -04:00
shemminger@osdl.org
98232f85ff [PATCH] sky2: pci post bug
Make sure that PCI write occurs before the delay.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-29 17:18:30 -04:00
shemminger@osdl.org
d3bcfbeb27 [PATCH] sky2: power down PHY when not up
To save power, don't enable power to the PHY until device is brought up.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-29 17:18:30 -04:00
shemminger@osdl.org
1d179332f8 [PATCH] sky2: optimize checksum offload information
Since many packets have the same checksum starting offset and insertion
location; the driver can save the last information and only tell hardware
when it changes.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-29 17:18:30 -04:00
shemminger@osdl.org
e07560cd4f [PATCH] sky2: TSO mss optimization
The MSS in the transmit engine only has to change if TSO mtu changes. This
means less commands to the chip when mixing TSO and regular data.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-29 17:18:30 -04:00