Some features, like Intel MPX, work only if the kernel uses eagerfpu
model. So we should force eagerfpu on unless the user has explicitly
disabled it.
Add definitions for Intel MPX and add it to the supported list.
[ hpa: renamed XSTATE_FLEXIBLE to XSTATE_LAZY and added comments ]
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Link: http://lkml.kernel.org/r/9E0BE1322F2F2246BD820DA9FC397ADE014A6115@SHSMSX102.ccr.corp.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Reimplement FPU detection code in C and drop old, not-so-recommended
detection method in asm. Move all the relevant stuff into i387.c where
it conceptually belongs. Finally drop cpuinfo_x86.hard_math.
[ hpa: huge thanks to Borislav for taking my original concept patch
and productizing it ]
[ Boris, note to self: do not use static_cpu_has before alternatives! ]
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1367244262-29511-2-git-send-email-bp@alien8.de
Link: http://lkml.kernel.org/r/1365436666-9837-2-git-send-email-bp@alien8.de
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
With SMAP, the [f][x]rstor_checking() functions are no longer usable
for user-space pointers by applying a simple __force cast. Instead,
create new [f][x]rstor_user() functions which do the proper SMAP
magic.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1343171129-2747-3-git-send-email-suresh.b.siddha@intel.com
Add the "eagerfpu=auto" (that selects the default scheme in
enabling eagerfpu) which can override compiled-in boot parameters
like "eagerfpu=on/off" (that force enable/disable eagerfpu).
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1347300665-6209-5-git-send-email-suresh.b.siddha@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
xsaveopt/xrstor support optimized state save/restore by tracking the
INIT state and MODIFIED state during context-switch.
Enable eagerfpu by default for processors supporting xsaveopt.
Can be disabled by passing "eagerfpu=off" boot parameter.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1347300665-6209-3-git-send-email-suresh.b.siddha@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Decouple non-lazy/eager fpu restore policy from the existence of the xsave
feature. Introduce a synthetic CPUID flag to represent the eagerfpu
policy. "eagerfpu=on" boot paramter will enable the policy.
Requested-by: H. Peter Anvin <hpa@zytor.com>
Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1347300665-6209-2-git-send-email-suresh.b.siddha@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Fundamental model of the current Linux kernel is to lazily init and
restore FPU instead of restoring the task state during context switch.
This changes that fundamental lazy model to the non-lazy model for
the processors supporting xsave feature.
Reasons driving this model change are:
i. Newer processors support optimized state save/restore using xsaveopt and
xrstor by tracking the INIT state and MODIFIED state during context-switch.
This is faster than modifying the cr0.TS bit which has serializing semantics.
ii. Newer glibc versions use SSE for some of the optimized copy/clear routines.
With certain workloads (like boot, kernel-compilation etc), application
completes its work with in the first 5 task switches, thus taking upto 5 #DNA
traps with the kernel not getting a chance to apply the above mentioned
pre-load heuristic.
iii. Some xstate features (like AMD's LWP feature) don't honor the cr0.TS bit
and thus will not work correctly in the presence of lazy restore. Non-lazy
state restore is needed for enabling such features.
Some data on a two socket SNB system:
* Saved 20K DNA exceptions during boot on a two socket SNB system.
* Saved 50K DNA exceptions during kernel-compilation workload.
* Improved throughput of the AVX based checksumming function inside the
kernel by ~15% as xsave/xrstor is faster than the serializing clts/stts
pair.
Also now kernel_fpu_begin/end() relies on the patched
alternative instructions. So move check_fpu() which uses the
kernel_fpu_begin/end() after alternative_instructions().
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1345842782-24175-7-git-send-email-suresh.b.siddha@intel.com
Merge 32-bit boot fix from,
Link: http://lkml.kernel.org/r/1347300665-6209-4-git-send-email-suresh.b.siddha@intel.com
Cc: Jim Kukunas <james.t.kukunas@linux.intel.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Few lines below we do drop_fpu() which is more safer. Remove the
unnecessary user_fpu_end() in save_xstate_sig(), which allows
the drop_fpu() to ignore any pending exceptions from the user-space
and drop the current fpu.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1345842782-24175-3-git-send-email-suresh.b.siddha@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
No need to save the state with unlazy_fpu(), that is about to get overwritten
by the state from the signal frame. Instead use drop_fpu() and continue
to restore the new state.
Also fold the stop_fpu_preload() into drop_fpu().
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1345842782-24175-2-git-send-email-suresh.b.siddha@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Currently for x86 and x86_32 binaries, fpstate in the user sigframe is copied
to/from the fpstate in the task struct.
And in the case of signal delivery for x86_64 binaries, if the fpstate is live
in the CPU registers, then the live state is copied directly to the user
sigframe. Otherwise fpstate in the task struct is copied to the user sigframe.
During restore, fpstate in the user sigframe is restored directly to the live
CPU registers.
Historically, different code paths led to different bugs. For example,
x86_64 code path was not preemption safe till recently. Also there is lot
of code duplication for support of new features like xsave etc.
Unify signal handling code paths for x86 and x86_64 kernels.
New strategy is as follows:
Signal delivery: Both for 32/64-bit frames, align the core math frame area to
64bytes as needed by xsave (this where the main fpu/extended state gets copied
to and excludes the legacy compatibility fsave header for the 32-bit [f]xsave
frames). If the state is live, copy the register state directly to the user
frame. If not live, copy the state in the thread struct to the user frame. And
for 32-bit [f]xsave frames, construct the fsave header separately before
the actual [f]xsave area.
Signal return: As the 32-bit frames with [f]xstate has an additional
'fsave' header, copy everything back from the user sigframe to the
fpstate in the task structure and reconstruct the fxstate from the 'fsave'
header (Also user passed pointers may not be correctly aligned for
any attempt to directly restore any partial state). At the next fpstate usage,
everything will be restored to the live CPU registers.
For all the 64-bit frames and the 32-bit fsave frame, restore the state from
the user sigframe directly to the live CPU registers. 64-bit signals always
restored the math frame directly, so we can expect the math frame pointer
to be correctly aligned. For 32-bit fsave frames, there are no alignment
requirements, so we can restore the state directly.
"lat_sig catch" microbenchmark numbers (for x86, x86_64, x86_32 binaries) are
with in the noise range with this change.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1343171129-2747-4-git-send-email-suresh.b.siddha@intel.com
[ Merged in compilation fix ]
Link: http://lkml.kernel.org/r/1344544736.8326.17.camel@sbsiddha-desk.sc.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Don't remove the __user annotation of the fpstate pointer, but
drop the superfluous void * cast instead.
This fixes the following sparse warnings:
xsave.c:135:15: warning: cast removes address space of expression
xsave.c:135:15: warning: incorrect type in argument 1 (different address spaces)
xsave.c:135:15: expected void const volatile [noderef] <asn:1>*<noident>
[...]
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1346621506-30857-6-git-send-email-minipli@googlemail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use a more current logging style:
- Bare printks should have a KERN_<LEVEL> for consistency's sake
- Add pr_fmt where appropriate
- Neaten some macro definitions
- Convert some Ok output to OK
- Use "%s: ", __func__ in pr_fmt for summit
- Convert some printks to pr_<level>
Message output is not identical in all cases.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: levinsasha928@gmail.com
Link: http://lkml.kernel.org/r/1337655007.24226.10.camel@joe2Laptop
[ merged two similar patches, tidied up the changelog ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Code paths like fork(), exit() and signal handling flush the fpu
state explicitly to the structures in memory.
BUG_ON() in __sanitize_i387_state() is checking that the fpu state
is not live any more. But for preempt kernels, task can be scheduled
out and in at any place and the preload_fpu logic during context switch
can make the fpu registers live again.
For example, consider a 64-bit Task which uses fpu frequently and as such
you will find its fpu_counter mostly non-zero. During its time slice, kernel
used fpu by doing kernel_fpu_begin/kernel_fpu_end(). After this, in the same
scheduling slice, task-A got a signal to handle. Then during the signal
setup path we got preempted when we are just before the sanitize_i387_state()
in arch/x86/kernel/xsave.c:save_i387_xstate(). And when we come back we
will have the fpu registers live that can hit the bug_on.
Similarly during core dump, other threads can context-switch in and out
(because of spurious wakeups while waiting for the coredump to finish in
kernel/exit.c:exit_mm()) and the main thread dumping core can run into this
bug when it finds some other thread with its fpu registers live on some other cpu.
So remove the paranoid check for now, even though it caught a bug in the
multi-threaded core dump case (fixed in the previous patch).
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1336692811-30576-3-git-send-email-suresh.b.siddha@intel.com
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
While various modules include <asm/i387.h> to get access to things we
actually *intend* for them to use, most of that header file was really
pretty low-level internal stuff that we really don't want to expose to
others.
So split the header file into two: the small exported interfaces remain
in <asm/i387.h>, while the internal definitions that are only used by
core architecture code are now in <asm/fpu-internal.h>.
The guiding principle for this was to expose functions that we export to
modules, and leave them in <asm/i387.h>, while stuff that is used by
task switching or was marked GPL-only is in <asm/fpu-internal.h>.
The fpu-internal.h file could be further split up too, especially since
arch/x86/kvm/ uses some of the remaining stuff for its module. But that
kvm usage should probably be abstracted out a bit, and at least now the
internal FPU accessor functions are much more contained. Even if it
isn't perhaps as contained as it _could_ be.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1202211340330.5354@i5.linux-foundation.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This moves the bit that indicates whether a thread has ownership of the
FPU from the TS_USEDFPU bit in thread_info->status to a word of its own
(called 'has_fpu') in task_struct->thread.has_fpu.
This fixes two independent bugs at the same time:
- changing 'thread_info->status' from the scheduler causes nasty
problems for the other users of that variable, since it is defined to
be thread-synchronous (that's what the "TS_" part of the naming was
supposed to indicate).
So perfectly valid code could (and did) do
ti->status |= TS_RESTORE_SIGMASK;
and the compiler was free to do that as separate load, or and store
instructions. Which can cause problems with preemption, since a task
switch could happen in between, and change the TS_USEDFPU bit. The
change to TS_USEDFPU would be overwritten by the final store.
In practice, this seldom happened, though, because the 'status' field
was seldom used more than once, so gcc would generally tend to
generate code that used a read-modify-write instruction and thus
happened to avoid this problem - RMW instructions are naturally low
fat and preemption-safe.
- On x86-32, the current_thread_info() pointer would, during interrupts
and softirqs, point to a *copy* of the real thread_info, because
x86-32 uses %esp to calculate the thread_info address, and thus the
separate irq (and softirq) stacks would cause these kinds of odd
thread_info copy aliases.
This is normally not a problem, since interrupts aren't supposed to
look at thread information anyway (what thread is running at
interrupt time really isn't very well-defined), but it confused the
heck out of irq_fpu_usable() and the code that tried to squirrel
away the FPU state.
(It also caused untold confusion for us poor kernel developers).
It also turns out that using 'task_struct' is actually much more natural
for most of the call sites that care about the FPU state, since they
tend to work with the task struct for other reasons anyway (ie
scheduling). And the FPU data that we are going to save/restore is
found there too.
Thanks to Arjan Van De Ven <arjan@linux.intel.com> for pointing us to
the %esp issue.
Cc: Arjan van de Ven <arjan@linux.intel.com>
Reported-and-tested-by: Raphael Prevost <raphael@buro.asia>
Acked-and-tested-by: Suresh Siddha <suresh.b.siddha@intel.com>
Tested-by: Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This creates three helper functions that do the TS_USEDFPU accesses, and
makes everybody that used to do it by hand use those helpers instead.
In addition, there's a couple of helper functions for the "change both
CR0.TS and TS_USEDFPU at the same time" case, and the places that do
that together have been changed to use those. That means that we have
fewer random places that open-code this situation.
The intent is partly to clarify the code without actually changing any
semantics yet (since we clearly still have some hard to reproduce bug in
this area), but also to make it much easier to use another approach
entirely to caching the CR0.TS bit for software accesses.
Right now we use a bit in the thread-info 'status' variable (this patch
does not change that), but we might want to make it a full field of its
own or even make it a per-cpu variable.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 5b1cbac377 ("i387: make irq_fpu_usable() tests more robust")
added a sanity check to the #NM handler to verify that we never cause
the "Device Not Available" exception in kernel mode.
However, that check actually pinpointed a (fundamental) race where we do
cause that exception as part of the signal stack FPU state save/restore
code.
Because we use the floating point instructions themselves to save and
restore state directly from user mode, we cannot do that atomically with
testing the TS_USEDFPU bit: the user mode access itself may cause a page
fault, which causes a task switch, which saves and restores the FP/MMX
state from the kernel buffers.
This kind of "recursive" FP state save is fine per se, but it means that
when the signal stack save/restore gets restarted, it will now take the
'#NM' exception we originally tried to avoid. With preemption this can
happen even without the page fault - but because of the user access, we
cannot just disable preemption around the save/restore instruction.
There are various ways to solve this, including using the
"enable/disable_page_fault()" helpers to not allow page faults at all
during the sequence, and fall back to copying things by hand without the
use of the native FP state save/restore instructions.
However, the simplest thing to do is to just allow the #NM from kernel
space, but fix the race in setting and clearing CR0.TS that this all
exposed: the TS bit changes and the TS_USEDFPU bit absolutely have to be
atomic wrt scheduling, so while the actual state save/restore can be
interrupted and restarted, the act of actually clearing/setting CR0.TS
and the TS_USEDFPU bit together must not.
Instead of just adding random "preempt_disable/enable()" calls to what
is already excessively ugly code, this introduces some helper functions
that mostly mirror the "kernel_fpu_begin/end()" functionality, just for
the user state instead.
Those helper functions should probably eventually replace the other
ad-hoc CR0.TS and TS_USEDFPU tests too, but I'll need to think about it
some more: the task switching functionality in particular needs to
expose the difference between the 'prev' and 'next' threads, while the
new helper functions intentionally were written to only work with
'current'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
They were generated by 'codespell' and then manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: trivial@kernel.org
LKML-Reference: <1300389856-1099-3-git-send-email-lucas.demarchi@profusion.mobi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Alignment of alloc_bootmem() depends on the value of
L1_CACHE_SHIFT. What we need here, however, is 64 byte alignment. Use
alloc_bootmem_align() and explicitly specify the alignment instead.
This fixes a kernel boot crash reported by Jody when the cpu in .config
is set to MPENTIUMII but the kernel is booted on a xsave-capable CPU.
Reported-by: Jody Bruchon <jody@nctritech.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20101116212442.059967454@sbsiddha-MOBL3.sc.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@kernel.org>
* 'x86-xsave-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, xsave: Make xstate_enable_boot_cpu() __init, protect on CPU 0
x86, xsave: Add __init attribute to setup_xstate_features()
x86, xsave: Make init_xstate_buf static
x86, xsave: Check cpuid level for XSTATE_CPUID (0x0d)
x86, xsave: Introduce xstate enable functions
x86, xsave: Separate fpu and xsave initialization
x86, xsave: Move boot cpu initialization to xsave_init()
x86, xsave: 32/64 bit boot cpu check unification in initialization
x86, xsave: Do not include asm/i387.h in asm/xsave.h
x86, xsave: Use xsaveopt in context-switch path when supported
x86, xsave: Sync xsave memory layout with its header for user handling
x86, xsave: Track the offset, size of state in the xsave layout
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Clean up arch/x86/kernel/cpu/mtrr/cleanup.c: use ";" not "," to terminate statements
* 'x86-vmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, vmware: Preset lpj values when on VMware.
* 'x86-mtrr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, mtrr: Use stop machine context to rendezvous all the cpu's
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86/apic/es7000_32: Remove unused variable
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Avoid unnecessary __clear_user() and xrstor in signal handling
* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, vdso: Unmap vdso pages
xstate_enable_boot_cpu() is, as the name implies, only used on the
boot CPU; furthermore, it invokes alloc_bootmem(), which is __init;
hence it needs to be tagged __init rather than __cpuinit.
Furthermore, it is *not* safe in the long run to rely on CPU 0 only
coming online during the early boot -- at some point we're going to
support offlining (and re-onlining) the boot CPU, and at that point we
must not call xstate_enable_boot_cpu() again.
The code is a fair bit more obscure than one would like, because the
__ref overrides aren't quite powerful enough.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Robert Richter <robert.richter@amd.com>
LKML-Reference: <4C476236.1020302@zytor.com>
This is called only from initialization code.
Signed-off-by: Robert Richter <robert.richter@amd.com>
LKML-Reference: <1279731838-1522-6-git-send-email-robert.richter@amd.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The pointer is only used in xsave.c. Making it static.
Signed-off-by: Robert Richter <robert.richter@amd.com>
LKML-Reference: <1279731838-1522-5-git-send-email-robert.richter@amd.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The patch introduces the XSTATE_CPUID macro and adds a check that
tests if XSTATE_CPUID exists.
Signed-off-by: Robert Richter <robert.richter@amd.com>
LKML-Reference: <1279731838-1522-4-git-send-email-robert.richter@amd.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The patch renames xsave_cntxt_init() and __xsave_init() into
xstate_enable_boot_cpu() and xstate_enable() as this names are more
meaningful.
It also removes the duplicate xcr setup for the boot cpu.
Signed-off-by: Robert Richter <robert.richter@amd.com>
LKML-Reference: <1279731838-1522-3-git-send-email-robert.richter@amd.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
As xsave also supports other than fpu features, it should be
initialized independently of the fpu. This patch moves this out of fpu
initialization.
There is also a lot of cross referencing between fpu and xsave
code. This patch reduces this by making xsave_cntxt_init() and
init_thread_xstate() static functions.
The patch moves the cpu_has_xsave check at the beginning of
xsave_init(). All other checks may removed then.
Signed-off-by: Robert Richter <robert.richter@amd.com>
LKML-Reference: <1279731838-1522-2-git-send-email-robert.richter@amd.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This patch moves boot cpu initialization to xsave_init(). Now all cpus
are initialized in one single function.
Signed-off-by: Robert Richter <robert.richter@amd.com>
LKML-Reference: <1279651857-24639-5-git-send-email-robert.richter@amd.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
With xsaveopt, if a processor implementation discern that a processor state
component is in its initialized state it may modify the corresponding bit in
the xsave_hdr.xstate_bv as '0', with out modifying the corresponding memory
layout. Hence wHile presenting the xstate information to the user, we always
ensure that the memory layout of a feature will be in the init state if the
corresponding header bit is zero. This ensures the consistency and avoids the
condition of the user seeing some some stale state in the memory layout during
signal handling, debugging etc.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20100719230205.351459480@sbs-t61.sc.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Subleaves of the cpuid vector 0xd provides the offset and size of different
feature state that are managed by the xsave/xrstor. Track this for the upcoming
usage during signal handling.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20100719230205.262987929@sbs-t61.sc.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
fxsave/xsave doesn't touch all the bytes in the memory layout used by
these instructions. Specifically SW reserved (bytes 464..511) fields
in the fxsave frame and the reserved fields in the xsave header.
To present a clean context for the signal handling, just clear these fields
instead of clearing the complete fxsave/xsave memory layout, when we dump these
registers directly to the user signal frame.
Also avoid the call to second xrstor (which inits the state not passed
in the signal frame) in restore_user_xstate() if all the state has already
been restored by the first xrstor.
These changes improve the performance of signal handling(by ~3-5% as measured
by the lat_sig).
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1277249017.2847.85.camel@sbs-t61.sc.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The places which call check_for_xstate() only care about zero or
non-zero so this patch doesn't change how the code runs, but it's a
cleanup. The main reason for this patch is that I'm looking for places
which don't return -EFAULT for copy_from_user() failures.
Signed-off-by: Dan Carpenter <error27@gmail.com>
LKML-Reference: <20100603100746.GU5483@bicker>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Currently all fpu state access is through tsk->thread.xstate. Since we wish
to generalize fpu access to non-task contexts, wrap the state in a new
'struct fpu' and convert existing access to use an fpu API.
Signal frame handlers are not converted to the API since they will remain
task context only things.
Signed-off-by: Avi Kivity <avi@redhat.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1273135546-29690-3-git-send-email-avi@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
The fpu code currently uses current->thread_info->status & TS_XSAVE as
a way to distinguish between XSAVE capable processors and older processors.
The decision is not really task specific; instead we use the task status to
avoid a global memory reference - the value should be the same across all
threads.
Eliminate this tie-in into the task structure by using an alternative
instruction keyed off the XSAVE cpu feature; this results in shorter and
faster code, without introducing a global memory reference.
[ hpa: in the future, this probably should use an asm jmp ]
Signed-off-by: Avi Kivity <avi@redhat.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1273135546-29690-2-git-send-email-avi@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Add the xstate regset support which helps extend the kernel ptrace and the
core-dump interfaces to support AVX state etc.
This regset interface is designed to support all the future state that gets
supported using xsave/xrstor infrastructure.
Looking at the memory layout saved by "xsave", one can't say which state
is represented in the memory layout. This is because if a particular state is
in init state, in the xsave hdr it can be represented by bit '0'. And hence
we can't really say by the xsave header wether a state is in init state or
the state is not saved in the memory layout.
And hence the xsave memory layout available through this regset
interface uses SW usable bytes [464..511] to convey what state is represented
in the memory layout.
First 8 bytes of the sw_usable_bytes[464..467] will be set to OS enabled xstate
mask(which is same as the 64bit mask returned by the xgetbv's xCR0).
The note NT_X86_XSTATE represents the extended state information in the
core file, using the above mentioned memory layout.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20100211195614.802495327@sbs-t61.sc.intel.com>
Signed-off-by: Hongjiu Lu <hjl.tools@gmail.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
In 64bit signal delivery path, clear_used_math() was happening before saving
the current active FPU state on to the user stack for signal handling. Between
clear_used_math() and the state store on to the user stack, potentially we
can get a page fault for the user address and can block. Infact, while testing
we were hitting the might_fault() in __clear_user() which can do a schedule().
At a later point in time, we will schedule back into this process and
resume the save state (using "xsave/fxsave" instruction) which can lead
to DNA fault. And as used_math was cleared before, we will reinit the FP state
in the DNA fault and continue. This reinit will result in loosing the
FPU state of the process.
Move clear_used_math() to a point after the FPU state has been stored
onto the user stack.
This issue is present from a long time (even before the xsave changes
and the x86 merge). But it can easily be exposed in 2.6.28.x and 2.6.29.x
series because of the __clear_user() in this path, which has an explicit
__cond_resched() leading to a context switch with CONFIG_PREEMPT_VOLUNTARY.
[ Impact: fix FPU state corruption ]
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: <stable@kernel.org> [2.6.28.x, 2.6.29.x]
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Impact: save/restore Intel-AVX state properly between tasks
Intel Advanced Vector Extensions (AVX) introduce 256-bit vector processing
capability. More about AVX at http://software.intel.com/sites/avx
Add OS support for YMM state management using xsave/xrstor infrastructure
to support AVX.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1239402084.27006.8057.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, reduce kernel size a bit, avoid sparse warning
Fixes sparse warning:
arch/x86/kernel/xsave.c:162:5: warning: symbol 'restore_user_xstate' was not declared. Should it be static?
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Annotate xsave_cntxt_init() as "can be called outside of __init".
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
These variables are only used in their source files, so make them static.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix warning:
arch/x86/kernel/xsave.c: In function ‘save_i387_xstate’:
arch/x86/kernel/xsave.c:98: warning: ignoring return value of ‘__clear_user’, declared with attribute warn_unused_result
check the return value and act on it. We should not be ignoring faults
at this point.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If a processor implementation discern that a processor state component is in
its initialized state, it may modify the corresponding bit in the
xsave header.xstate_bv as '0'. State in the memory layout setup by 'xsave'
will be consistent with the bit values in the header.
During signal handling, legacy applications may change the FP/SSE bits
in the sigcontext memory layout without touching the FP/SSE header bits
in the xsave header. So always set FP/SSE bits in the xsave header
while saving the sigcontext state to the user space. During signal return,
this will enable the kernel to capture any changes to the FP/SSE bits by the
legacy applications which don't touch xsave headers.
xsave aware apps can change the xstate_bv in the xsave header aswell
as change any contents in the memory layout. xrestor as part of sigreturn
will capture all the changes.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
WARNING: vmlinux.o(.text+0x22453): Section mismatch in reference from the function setup_xstate_init() to the function .init.text:__alloc_bootmem()
The function setup_xstate_init() references the function __init __alloc_bootmem().
This is often because setup_xstate_init lacks a __init annotation or the annotation of __alloc_bootmem is wrong.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
All these structure sizes are runtime determined. So use a runtime
bug check.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fxsave/xsave instructions will not touch all the bytes in the
fxsave/xsave frame. Clear the user buffer before doing fxsave/xsave
directly to user buffer during the sigcontext setup.
This is essentially needed in the context of xsave(for example,
some of the fields in the xsave header are not touched by the xsave
and defined as must be zero).
This will also present uniform and clean context to the user (from
which user can safely do fxrstor/xrstor).
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The XSAVE feature mask is a 64-bit number; keep it that way, in order
to avoid the mistake done with rdmsr/wrmsr. Use the xsetbv() function
provided in the previous patch.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On cpu's supporting xsave/xrstor, fpstate pointer in the sigcontext, will
include the extended state information along with fpstate information. Presence
of extended state information is indicated by the presence
of FP_XSTATE_MAGIC1 at fpstate.sw_reserved.magic1 and FP_XSTATE_MAGIC2
at fpstate + (fpstate.sw_reserved.extended_size - FP_XSTATE_MAGIC2_SIZE).
Extended feature bit mask that is saved in the memory layout is represented
by the fpstate.sw_reserved.xstate_bv
For RT signal frames, UC_FP_XSTATE in the uc_flags also indicate the
presence of extended state information in the sigcontext's fpstate
pointer.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
