Commit Graph

22102 Commits

Author SHA1 Message Date
Michael S. Tsirkin
24b6842ade virtio: virtio_has_iommu_quirk -> virtio_has_dma_quirk
Now that the corresponding feature bit has been renamed,
rename the quirk too - it's about special ways to
do DMA, not necessarily about the IOMMU.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-03 16:11:42 -04:00
Michael S. Tsirkin
321bd21261 virtio: VIRTIO_F_IOMMU_PLATFORM -> VIRTIO_F_ACCESS_PLATFORM
Rename the bit to match latest virtio spec.
Add a compat macro to avoid breaking existing userspace.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
2020-08-03 16:11:42 -04:00
Linus Torvalds
628e04dfeb Bugfixes and strengthening the validity checks on inputs from new userspace APIs.
-----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl8mdWQUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroM48Qf/eUYXVdGQWErQ/BQR/pLPfTUkjkIj
 1C/IGogWijbWPQrtIsnXVG53eULgHocbfzExZ8PzUSfjuZ/g9V8aHGbrGKbg/y6g
 SVArpCTu+BDidmLMbjsAKh3f5SEbzZZuFKnoxoEEKiA2TeYqDQ05nxcv9+T4udrs
 DWqXnk27y0vR9RtJkf5sqDnyH36cDT9TsbRFPaCt/hFE0UA65UTtWgl1ZaagzmuL
 I70z5Ap+/6fsEMoKoys9AKSCpLRGUBu/42fQhZkEq9no0w5PBkzn/YMfapHwT9I+
 1i9WUv3gn+FQOXpqAg0+aaPtWwIBIEONbm0qmw4yNNUI24Btq2QjGWxRqg==
 =VQPu
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
 "Bugfixes and strengthening the validity checks on inputs from new
  userspace APIs.

  Now I know why I shouldn't prepare pull requests on the weekend, it's
  hard to concentrate if your son is shouting about his latest Minecraft
  builds in your ear. Fortunately all the patches were ready and I just
  had to check the test results..."

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SVM: Fix disable pause loop exit/pause filtering capability on SVM
  KVM: LAPIC: Prevent setting the tscdeadline timer if the lapic is hw disabled
  KVM: arm64: Don't inherit exec permission across page-table levels
  KVM: arm64: Prevent vcpu_has_ptrauth from generating OOL functions
  KVM: nVMX: check for invalid hdr.vmx.flags
  KVM: nVMX: check for required but missing VMCS12 in KVM_SET_NESTED_STATE
  selftests: kvm: do not set guest mode flag
2020-08-02 10:41:00 -07:00
Linus Torvalds
ac3a0c8472 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

 1) Encap offset calculation is incorrect in esp6, from Sabrina Dubroca.

 2) Better parameter validation in pfkey_dump(), from Mark Salyzyn.

 3) Fix several clang issues on powerpc in selftests, from Tanner Love.

 4) cmsghdr_from_user_compat_to_kern() uses the wrong length, from Al
    Viro.

 5) Out of bounds access in mlx5e driver, from Raed Salem.

 6) Fix transfer buffer memleak in lan78xx, from Johan Havold.

 7) RCU fixups in rhashtable, from Herbert Xu.

 8) Fix ipv6 nexthop refcnt leak, from Xiyu Yang.

 9) vxlan FDB dump must be done under RCU, from Ido Schimmel.

10) Fix use after free in mlxsw, from Ido Schimmel.

11) Fix map leak in HASH_OF_MAPS bpf code, from Andrii Nakryiko.

12) Fix bug in mac80211 Tx ack status reporting, from Vasanthakumar
    Thiagarajan.

13) Fix memory leaks in IPV6_ADDRFORM code, from Cong Wang.

14) Fix bpf program reference count leaks in mlx5 during
    mlx5e_alloc_rq(), from Xin Xiong.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
  vxlan: fix memleak of fdb
  rds: Prevent kernel-infoleak in rds_notify_queue_get()
  net/sched: The error lable position is corrected in ct_init_module
  net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq
  net/mlx5e: E-Switch, Specify flow_source for rule with no in_port
  net/mlx5e: E-Switch, Add misc bit when misc fields changed for mirroring
  net/mlx5e: CT: Support restore ipv6 tunnel
  net: gemini: Fix missing clk_disable_unprepare() in error path of gemini_ethernet_port_probe()
  ionic: unlock queue mutex in error path
  atm: fix atm_dev refcnt leaks in atmtcp_remove_persistent
  net: ethernet: mtk_eth_soc: fix MTU warnings
  net: nixge: fix potential memory leak in nixge_probe()
  devlink: ignore -EOPNOTSUPP errors on dumpit
  rxrpc: Fix race between recvmsg and sendmsg on immediate call failure
  MAINTAINERS: Replace Thor Thayer as Altera Triple Speed Ethernet maintainer
  selftests/bpf: fix netdevsim trap_flow_action_cookie read
  ipv6: fix memory leaks on IPV6_ADDRFORM path
  net/bpfilter: Initialize pos in __bpfilter_process_sockopt
  igb: reinit_locked() should be called with rtnl_lock
  e1000e: continue to init PHY even when failed to disable ULP
  ...
2020-08-01 16:47:24 -07:00
David S. Miller
69138b34a7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2020-07-31

The following pull-request contains BPF updates for your *net* tree.

We've added 5 non-merge commits during the last 21 day(s) which contain
a total of 5 files changed, 126 insertions(+), 18 deletions(-).

The main changes are:

1) Fix a map element leak in HASH_OF_MAPS map type, from Andrii Nakryiko.

2) Fix a NULL pointer dereference in __btf_resolve_helper_id() when no
   btf_vmlinux is available, from Peilin Ye.

3) Init pos variable in __bpfilter_process_sockopt(), from Christoph Hellwig.

4) Fix a cgroup sockopt verifier test by specifying expected attach type,
   from Jean-Philippe Brucker.

Note that when net gets merged into net-next later on, there is a small
merge conflict in kernel/bpf/btf.c between commit 5b801dfb7f ("bpf: Fix
NULL pointer dereference in __btf_resolve_helper_id()") from the bpf tree
and commit 138b9a0511 ("bpf: Remove btf_id helpers resolving") from the
net-next tree.

Resolve as follows: remove the old hunk with the __btf_resolve_helper_id()
function. Change the btf_resolve_helper_id() so it actually tests for a
NULL btf_vmlinux and bails out:

int btf_resolve_helper_id(struct bpf_verifier_log *log,
                          const struct bpf_func_proto *fn, int arg)
{
        int id;

        if (fn->arg_type[arg] != ARG_PTR_TO_BTF_ID || !btf_vmlinux)
                return -EINVAL;
        id = fn->btf_id[arg];
        if (!id || id > btf_vmlinux->nr_types)
                return -EINVAL;
        return id;
}

Let me know if you run into any others issues (CC'ing Jiri Olsa so he's in
the loop with regards to merge conflict resolution).
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31 17:19:47 -07:00
Ben Hutchings
39efdd94e3 libtraceevent: Fix build with binutils 2.35
In binutils 2.35, 'nm -D' changed to show symbol versions along with
symbol names, with the usual @@ separator.  When generating
libtraceevent-dynamic-list we need just the names, so strip off the
version suffix if present.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-31 09:31:55 -03:00
Wei Li
bd3c628f8f perf tools: Fix record failure when mixed with ARM SPE event
When recording with cache-misses and arm_spe_x event, I found that it
will just fail without showing any error info if i put cache-misses
after 'arm_spe_x' event.

  [root@localhost 0620]# perf record -e cache-misses \
				-e arm_spe_0/ts_enable=1,pct_enable=1,pa_enable=1,load_filter=1,jitter=1,store_filter=1,min_latency=0/ sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.067 MB perf.data ]
  [root@localhost 0620]#
  [root@localhost 0620]# perf record -e arm_spe_0/ts_enable=1,pct_enable=1,pa_enable=1,load_filter=1,jitter=1,store_filter=1,min_latency=0/ \
				     -e  cache-misses sleep 1
  [root@localhost 0620]#

The current code can only work if the only event to be traced is an
'arm_spe_x', or if it is the last event to be specified. Otherwise the
last event type will be checked against all the arm_spe_pmus[i]->types,
none will match and an out of bound 'i' index will be used in
arm_spe_recording_init().

We don't support concurrent multiple arm_spe_x events currently, that
is checked in arm_spe_recording_options(), and it will show the relevant
info. So add the check and record of the first found 'arm_spe_pmu' to
fix this issue here.

Fixes: ffd3d18c20 ("perf tools: Add ARM Statistical Profiling Extensions (SPE) support")
Signed-off-by: Wei Li <liwei391@huawei.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200724071111.35593-2-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-31 09:29:01 -03:00
Thomas Richter
463538a383 perf tests: Fix test 68 zstd compression for s390
Commit 5aa98879ef ("s390/cpum_sf: prohibit callchain data collection")
prohibits call graph sampling for hardware events on s390. The
information recorded is out of context and does not match.

On s390 this commit now breaks test case 68 Zstd perf.data
compression/decompression.

Therefore omit call graph sampling on s390 in this test.

Output before:
  [root@t35lp46 perf]# ./perf test -Fv 68
  68: Zstd perf.data compression/decompression              :
  --- start ---
  Collecting compressed record file:
  Error:
  cycles: PMU Hardware doesn't support sampling/overflow-interrupts.
                                Try 'perf stat'
  ---- end ----
  Zstd perf.data compression/decompression: FAILED!
  [root@t35lp46 perf]#

Output after:
[root@t35lp46 perf]# ./perf test -Fv 68
  68: Zstd perf.data compression/decompression              :
  --- start ---
  Collecting compressed record file:
  500+0 records in
  500+0 records out
  256000 bytes (256 kB, 250 KiB) copied, 0.00615638 s, 41.6 MB/s
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.004 MB /tmp/perf.data.X3M,
                        compressed (original 0.002 MB, ratio is 3.609) ]
  Checking compressed events stats:
  # compressed : Zstd, level = 1, ratio = 4
        COMPRESSED events:          1
  2ELIFREPh---- end ----
  Zstd perf.data compression/decompression: Ok
  [root@t35lp46 perf]#

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200729135314.91281-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-31 09:27:32 -03:00
Philippe Duplessis-Guindon
e24c6447cc tools lib traceevent: Fix memory leak in process_dynamic_array_len
I compiled with AddressSanitizer and I had these memory leaks while I
was using the tep_parse_format function:

    Direct leak of 28 byte(s) in 4 object(s) allocated from:
        #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe)
        #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985
        #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140
        #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206
        #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291
        #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299
        #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849
        #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161
        #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207
        #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786
        #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285
        #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369
        #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335
        #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389
        #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431
        #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251
        #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284
        #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593
        #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727
        #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048
        #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127
        #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152
        #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252
        #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347
        #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461
        #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673
        #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)

The token variable in the process_dynamic_array_len function is
allocated in the read_expect_type function, but is not freed before
calling the read_token function.

Free the token variable before calling read_token in order to plug the
leak.

Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-31 09:23:13 -03:00
Hangbin Liu
4bbca662df selftests/bpf: fix netdevsim trap_flow_action_cookie read
When read netdevsim trap_flow_action_cookie, we need to init it first,
or we will get "Invalid argument" error.

Fixes: d3cbb907ae ("netdevsim: add ACL trap reporting cookie as a metadata")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-30 16:33:07 -07:00
Andrii Nakryiko
0ba5834841 selftests/bpf: Extend map-in-map selftest to detect memory leaks
Add test validating that all inner maps are released properly after skeleton
is destroyed. To ensure determinism, trigger kernel-side synchronize_rcu()
before checking map existence by their IDs.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200729040913.2815687-2-andriin@fb.com
2020-07-30 01:30:26 +02:00
Amit Cohen
10fef9ca6a selftests: ethtool: Fix test when only two speeds are supported
The test case check_highest_speed_is_chosen() configures $h1 to
advertise a subset of its supported speeds and checks that $h2 chooses
the highest speed from the subset.

To find the common advertised speeds between $h1 and $h2,
common_speeds_get() is called.

Currently, the first speed returned from common_speeds_get() is removed
claiming "h1 does not advertise this speed". The claim is wrong because
the function is called after $h1 already advertised a subset of speeds.

In case $h1 supports only two speeds, it will advertise a single speed
which will be later removed because of previously mentioned bug. This
results in the test needlessly failing. When more than two speeds are
supported this is not an issue because the first advertised speed
is the lowest one.

Fix this by not removing any speed from the list of commonly advertised
speeds.

Fixes: 64916b57c0 ("selftests: forwarding: Add speed and auto-negotiation test")
Reported-by: Danielle Ratson <danieller@mellanox.com>
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-29 12:16:21 -07:00
Tanner Love
94b6c13be5 selftests/net: tcp_mmap: fix clang warning for target arch PowerPC
When size_t maps to unsigned int (e.g. on 32-bit powerpc), then the
comparison with 1<<35 is always true. Clang 9 threw:
warning: result of comparison of constant 34359738368 with \
expression of type 'size_t' (aka 'unsigned int') is always true \
[-Wtautological-constant-out-of-range-compare]
        while (total < FILE_SZ) {

Tested: make -C tools/testing/selftests TARGETS="net" run_tests

Fixes: 192dc405f3 ("selftests: net: add tcp_mmap program")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27 12:56:59 -07:00
Tanner Love
b4da96ffd3 selftests/net: so_txtime: fix clang issues for target arch PowerPC
On powerpcle, int64_t maps to long long. Clang 9 threw:
warning: absolute value function 'labs' given an argument of type \
'long long' but has parameter of type 'long' which may cause \
truncation of value [-Wabsolute-value]
        if (labs(tstop - texpect) > cfg_variance_us)

Tested: make -C tools/testing/selftests TARGETS="net" run_tests

Fixes: af5136f950 ("selftests/net: SO_TXTIME with ETF and FQ")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27 12:56:58 -07:00
Tanner Love
64f9ede227 selftests/net: psock_fanout: fix clang issues for target arch PowerPC
Clang 9 threw:
warning: format specifies type 'unsigned short' but the argument has \
type 'int' [-Wformat]
                typeflags, PORT_BASE, PORT_BASE + port_off);

Tested: make -C tools/testing/selftests TARGETS="net" run_tests

Fixes: 77f65ebdca ("packet: packet fanout rollover during socket overload")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27 12:56:58 -07:00
Tanner Love
955cbe91bc selftests/net: rxtimestamp: fix clang issues for target arch PowerPC
The signedness of char is implementation-dependent. Some systems
(including PowerPC and ARM) use unsigned char. Clang 9 threw:
warning: result of comparison of constant -1 with expression of type \
'char' is always true [-Wtautological-constant-out-of-range-compare]
                                  &arg_index)) != -1) {

Tested: make -C tools/testing/selftests TARGETS="net" run_tests

Fixes: 16e7812241 ("selftests/net: Add a test to validate behavior of rx timestamps")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27 12:56:58 -07:00
Paolo Bonzini
5e105c88ab KVM: nVMX: check for invalid hdr.vmx.flags
hdr.vmx.flags is meant for future extensions to the ABI, rejecting
invalid flags is necessary to avoid broken half-loads of the
nVMX state.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-27 09:04:50 -04:00
Paolo Bonzini
0f02bd0ade KVM: nVMX: check for required but missing VMCS12 in KVM_SET_NESTED_STATE
A missing VMCS12 was not causing -EINVAL (it was just read with
copy_from_user, so it is not a security issue, but it is still
wrong).  Test for VMCS12 validity and reject the nested state
if a VMCS12 is required but not present.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-27 09:04:49 -04:00
Paolo Bonzini
9319676595 selftests: kvm: do not set guest mode flag
Setting KVM_STATE_NESTED_GUEST_MODE enables various consistency checks
on VMCS12 and therefore causes KVM_SET_NESTED_STATE to fail spuriously
with -EINVAL.  Do not set the flag so that we're sure to cover the
conditions included by the test, and cover the case where VMCS12 is
set and KVM_SET_NESTED_STATE is called with invalid VMCS12 contents.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-27 09:04:48 -04:00
Linus Torvalds
1b64b2e244 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net into master
Pull networking fixes from David Miller:

 1) Fix RCU locaking in iwlwifi, from Johannes Berg.

 2) mt76 can access uninitialized NAPI struct, from Felix Fietkau.

 3) Fix race in updating pause settings in bnxt_en, from Vasundhara
    Volam.

 4) Propagate error return properly during unbind failures in ax88172a,
    from George Kennedy.

 5) Fix memleak in adf7242_probe, from Liu Jian.

 6) smc_drv_probe() can leak, from Wang Hai.

 7) Don't muck with the carrier state if register_netdevice() fails in
    the bonding driver, from Taehee Yoo.

 8) Fix memleak in dpaa_eth_probe, from Liu Jian.

 9) Need to check skb_put_padto() return value in hsr_fill_tag(), from
    Murali Karicheri.

10) Don't lose ionic RSS hash settings across FW update, from Shannon
    Nelson.

11) Fix clobbered SKB control block in act_ct, from Wen Xu.

12) Missing newlink in "tx_timeout" sysfs output, from Xiongfeng Wang.

13) IS_UDPLITE cleanup a long time ago, incorrectly handled
    transformations involving UDPLITE_RECV_CC. From Miaohe Lin.

14) Unbalanced locking in netdevsim, from Taehee Yoo.

15) Suppress false-positive error messages in qed driver, from Alexander
    Lobakin.

16) Out of bounds read in ax25_connect and ax25_sendmsg, from Peilin Ye.

17) Missing SKB release in cxgb4's uld_send(), from Navid Emamdoost.

18) Uninitialized value in geneve_changelink(), from Cong Wang.

19) Fix deadlock in xen-netfront, from Andera Righi.

19) flush_backlog() frees skbs with IRQs disabled, so should use
    dev_kfree_skb_irq() instead of kfree_skb(). From Subash Abhinov
    Kasiviswanathan.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
  drivers/net/wan: lapb: Corrected the usage of skb_cow
  dev: Defer free of skbs in flush_backlog
  qrtr: orphan socket in qrtr_release()
  xen-netfront: fix potential deadlock in xennet_remove()
  flow_offload: Move rhashtable inclusion to the source file
  geneve: fix an uninitialized value in geneve_changelink()
  bonding: check return value of register_netdevice() in bond_newlink()
  tcp: allow at most one TLP probe per flight
  AX.25: Prevent integer overflows in connect and sendmsg
  cxgb4: add missing release on skb in uld_send()
  net: atlantic: fix PTP on AQC10X
  AX.25: Prevent out-of-bounds read in ax25_sendmsg()
  sctp: shrink stream outq when fails to do addstream reconf
  sctp: shrink stream outq only when new outcnt < old outcnt
  AX.25: Fix out-of-bounds read in ax25_connect()
  enetc: Remove the mdio bus on PF probe bailout
  net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offload
  net: ethernet: ave: Fix error returns in ave_init
  drivers/net/wan/x25_asy: Fix to make it work
  ipvs: fix the connection sync failed in some cases
  ...
2020-07-25 11:50:59 -07:00
Paolo Pisati
b346c0c858 selftest: txtimestamp: fix net ns entry logic
According to 'man 8 ip-netns', if `ip netns identify` returns an empty string,
there's no net namespace associated with current PID: fix the net ns entrance
logic.

Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21 16:11:07 -07:00
Thomas Richter
3d3af181d3 s390/cpum_cf,perf: change DFLT_CCERROR counter name
Change the counter name DLFT_CCERROR to DLFT_CCFINISH on IBM z15.
This counter counts completed DEFLATE instructions with exit code
0, 1 or 2. Since exit code 0 means success and exit code 1 or 2
indicate errors, change the counter name to avoid confusion.
This counter is incremented each time the DEFLATE instruction
completed regardless if an error was detected or not.

Fixes: d68d5d51dc ("s390/cpum_cf: Add new extended counters for IBM z15")
Fixes: e7950166e4 ("perf vendor events s390: Add new deflate counters for IBM z15")
Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-21 13:53:56 +02:00
Linus Torvalds
92188b41f1 Third batch of perf tooling fixes for 5.8:
- Update hashmap.h from libbpf and kvm.h from x86's kernel UAPI.
 
 - Set opt->set in libsubcmd's OPT_CALLBACK_SET(). Fixes
   'perf record --switch-output-event event-name' usage.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 
 Test results:
 
 The first ones are container based builds of tools/perf with and without libelf
 support.  Where clang is available, it is also used to build perf with/without
 libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang
 when clang and its devel libraries are installed.
 
 The objtool and samples/bpf/ builds are disabled now that I'm switching from
 using the sources in a local volume to fetching them from a http server to
 build it inside the container, to make it easier to build in a container cluster.
 Those will come back later.
 
 Several are cross builds, the ones with -x-ARCH and the android one, and those
 may not have all the features built, due to lack of multi-arch devel packages,
 available and being used so far on just a few, like
 debian:experimental-x-{arm64,mipsel}.
 
 The 'perf test' one will perform a variety of tests exercising
 tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
 with a variety of command line event specifications to then intercept the
 sys_perf_event syscall to check that the perf_event_attr fields are set up as
 expected, among a variety of other unit tests.
 
 Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
 with a variety of feature sets, exercising the build with an incomplete set of
 features as well as with a complete one. It is planned to have it run on each
 of the containers mentioned above, using some container orchestration
 infrastructure. Get in contact if interested in helping having this in place.
 
 Some of the most recent, experimental distros are failing, fixes will be
 provided, but those gcc/clang versions are not yet in general use and some
 are related to linking with libllvm, not the default build.
 
   # export PERF_TARBALL=http://192.168.124.1/perf/perf-5.8.0-rc5.tar.xz
   # dm
    1 alpine:3.4                    : Ok   gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final)
    2 alpine:3.5                    : Ok   gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final)
    3 alpine:3.6                    : Ok   gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final)
    4 alpine:3.7                    : Ok   gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0)
    5 alpine:3.8                    : Ok   gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1)
    6 alpine:3.9                    : Ok   gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1)
    7 alpine:3.10                   : Ok   gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
    8 alpine:3.11                   : Ok   gcc (Alpine 9.2.0) 9.2.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0)
    9 alpine:3.12                   : Ok   gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
   10 alpine:edge                   : Ok   gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (git://git.alpinelinux.org/aports 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
   11 alt:p8                        : Ok   x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final)
   12 alt:p9                        : Ok   x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 7.0.1
   13 alt:sisyphus                  : Ok   x86_64-alt-linux-gcc (GCC) 9.2.1 20200123 (ALT Sisyphus 9.2.1-alt3), clang version 10.0.0
   14 amazonlinux:1                 : Ok   gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final)
   15 amazonlinux:2                 : Ok   gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2)
   16 android-ndk:r12b-arm          : Ok   arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
   17 android-ndk:r15c-arm          : Ok   arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
   18 centos:6                      : Ok   gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
   19 centos:7                      : Ok   gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39)
   20 centos:8                      : Ok   gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 9.0.1 (Red Hat 9.0.1-2.module_el8.2.0+309+0c7b6b03)
   21 clearlinux:latest             : Ok   gcc (Clear Linux OS for Intel Architecture) 10.1.1 20200708 releases/gcc-10.1.0-332-g17327d6cc7, clang version 10.0.0
   22 debian:8                      : Ok   gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
   23 debian:9                      : Ok   gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final)
   24 debian:10                     : Ok   gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8 (tags/RELEASE_701/final)
   25 debian:experimental           : FAIL gcc (Debian 9.3.0-15) 9.3.0, clang version 9.0.1-13
   26 debian:experimental-x-arm64   : Ok   aarch64-linux-gnu-gcc (Debian 9.3.0-8) 9.3.0
   27 debian:experimental-x-mips    : Ok   mips-linux-gnu-gcc (Debian 8.3.0-19) 8.3.0
   28 debian:experimental-x-mips64  : Ok   mips64-linux-gnuabi64-gcc (Debian 9.3.0-8) 9.3.0
   29 debian:experimental-x-mipsel  : Ok   mipsel-linux-gnu-gcc (Debian 9.2.1-8) 9.2.1 20190909
   30 fedora:20                     : Ok   gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
   31 fedora:22                     : Ok   gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final)
   32 fedora:23                     : Ok   gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final)
   33 fedora:24                     : Ok   gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final)
   34 fedora:24-x-ARC-uClibc        : Ok   arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
   35 fedora:25                     : Ok   gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final)
   36 fedora:26                     : Ok   gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final)
   37 fedora:27                     : Ok   gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final)
   38 fedora:28                     : Ok   gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final)
   39 fedora:29                     : Ok   gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29)
   40 fedora:30                     : Ok   gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 8.0.0 (Fedora 8.0.0-3.fc30)
   41 fedora:30-x-ARC-glibc         : Ok   arc-linux-gcc (ARC HS GNU/Linux glibc toolchain 2019.03-rc1) 8.3.1 20190225
   42 fedora:30-x-ARC-uClibc        : Ok   arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
   43 fedora:31                     : Ok   gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 9.0.1 (Fedora 9.0.1-2.fc31)
   44 fedora:32                     : Ok   gcc (GCC) 10.1.1 20200507 (Red Hat 10.1.1-1), clang version 10.0.0 (Fedora 10.0.0-2.fc32)
   45 fedora:rawhide                : FAIL gcc (GCC) 10.1.1 20200618 (Red Hat 10.1.1-2), clang version 10.0.0 (Fedora 10.0.0-6.fc33)
   46 gentoo-stage3-amd64:latest    : Ok   gcc (Gentoo 9.2.0-r2 p3) 9.2.0
   47 mageia:5                      : Ok   gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final)
   48 mageia:6                      : Ok   gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final)
   49 mageia:7                      : Ok   gcc (Mageia 8.3.1-0.20190524.1.mga7) 8.3.1 20190524, clang version 8.0.0 (Mageia 8.0.0-1.mga7)
   50 manjaro:latest                : Ok   gcc (GCC) 9.2.0, clang version 9.0.0 (tags/RELEASE_900/final)
   51 openmandriva:cooker           : Ok   gcc (GCC) 10.0.0 20200502 (OpenMandriva), clang version 10.0.1
   52 opensuse:15.0                 : Ok   gcc (SUSE Linux) 7.4.1 20190424 [gcc-7-branch revision 270538], clang version 5.0.1 (tags/RELEASE_501/final 312548)
   53 opensuse:15.1                 : Ok   gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
   54 opensuse:15.2                 : Ok   gcc (SUSE Linux) 7.5.0, clang version 9.0.1
   55 opensuse:42.3                 : Ok   gcc (SUSE Linux) 4.8.5, clang version 3.8.0 (tags/RELEASE_380/final 262553)
   56 opensuse:tumbleweed           : Ok   gcc (SUSE Linux) 10.1.1 20200625 [revision c91e43e9363bd119a695d64505f96539fa451bf2], clang version 10.0.0
   57 oraclelinux:6                 : Ok   gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
   58 oraclelinux:7                 : Ok   gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39.0.3)
   59 oraclelinux:8                 : Ok   gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5.0.3), clang version 9.0.1 (Red Hat 9.0.1-2.0.1.module+el8.2.0+5599+9ed9ef6d)
   60 ubuntu:12.04                  : Ok   gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3, Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0)
   61 ubuntu:14.04                  : Ok   gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
   62 ubuntu:16.04                  : Ok   gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
   63 ubuntu:16.04-x-arm            : Ok   arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
   64 ubuntu:16.04-x-arm64          : Ok   aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
   65 ubuntu:16.04-x-powerpc        : Ok   powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
   66 ubuntu:16.04-x-powerpc64      : Ok   powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
   67 ubuntu:16.04-x-powerpc64el    : Ok   powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
   68 ubuntu:16.04-x-s390           : Ok   s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
   69 ubuntu:18.04                  : Ok   gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
   70 ubuntu:18.04-x-arm            : Ok   arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
   71 ubuntu:18.04-x-arm64          : Ok   aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
   72 ubuntu:18.04-x-m68k           : Ok   m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
   73 ubuntu:18.04-x-powerpc        : Ok   powerpc-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
   74 ubuntu:18.04-x-powerpc64      : Ok   powerpc64-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
   75 ubuntu:18.04-x-powerpc64el    : Ok   powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
   76 ubuntu:18.04-x-riscv64        : Ok   riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
   77 ubuntu:18.04-x-s390           : Ok   s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
   78 ubuntu:18.04-x-sh4            : Ok   sh4-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
   79 ubuntu:18.04-x-sparc64        : Ok   sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
   80 ubuntu:18.10                  : Ok   gcc (Ubuntu 8.3.0-6ubuntu1~18.10.1) 8.3.0, clang version 7.0.0-3 (tags/RELEASE_700/final)
   81 ubuntu:19.04                  : Ok   gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0, clang version 8.0.0-3 (tags/RELEASE_800/final)
   82 ubuntu:19.04-x-alpha          : Ok   alpha-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
   83 ubuntu:19.04-x-arm64          : Ok   aarch64-linux-gnu-gcc (Ubuntu/Linaro 8.3.0-6ubuntu1) 8.3.0
   84 ubuntu:19.04-x-hppa           : Ok   hppa-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
   85 ubuntu:19.10                  : FAIL gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 9.0.0-2 (tags/RELEASE_900/final)
   86 ubuntu:20.04                  : Ok   gcc (Ubuntu 9.3.0-10ubuntu2) 9.3.0, clang version 10.0.0-4ubuntu1
   #
 
   # git log --oneline -1
   25d4e7f513 (HEAD -> perf/urgent) tools arch kvm: Sync kvm headers with the kernel sources
   # perf -vv
   perf version 5.8.rc5.g25d4e7f513d4
                    dwarf: [ on  ]  # HAVE_DWARF_SUPPORT
       dwarf_getlocations: [ on  ]  # HAVE_DWARF_GETLOCATIONS_SUPPORT
                    glibc: [ on  ]  # HAVE_GLIBC_SUPPORT
                     gtk2: [ on  ]  # HAVE_GTK2_SUPPORT
            syscall_table: [ on  ]  # HAVE_SYSCALL_TABLE_SUPPORT
                   libbfd: [ on  ]  # HAVE_LIBBFD_SUPPORT
                   libelf: [ on  ]  # HAVE_LIBELF_SUPPORT
                  libnuma: [ on  ]  # HAVE_LIBNUMA_SUPPORT
   numa_num_possible_cpus: [ on  ]  # HAVE_LIBNUMA_SUPPORT
                  libperl: [ on  ]  # HAVE_LIBPERL_SUPPORT
                libpython: [ on  ]  # HAVE_LIBPYTHON_SUPPORT
                 libslang: [ on  ]  # HAVE_SLANG_SUPPORT
                libcrypto: [ on  ]  # HAVE_LIBCRYPTO_SUPPORT
                libunwind: [ on  ]  # HAVE_LIBUNWIND_SUPPORT
       libdw-dwarf-unwind: [ on  ]  # HAVE_DWARF_SUPPORT
                     zlib: [ on  ]  # HAVE_ZLIB_SUPPORT
                     lzma: [ on  ]  # HAVE_LZMA_SUPPORT
                get_cpuid: [ on  ]  # HAVE_AUXTRACE_SUPPORT
                      bpf: [ on  ]  # HAVE_LIBBPF_SUPPORT
                      aio: [ on  ]  # HAVE_AIO_SUPPORT
                     zstd: [ on  ]  # HAVE_ZSTD_SUPPORT
   # uname -a
   Linux quaco 5.7.8-200.fc32.x86_64 #1 SMP Thu Jul 9 14:34:51 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
   # perf test
    1: vmlinux symtab matches kallsyms                       : Ok
    2: Detect openat syscall event                           : Ok
    3: Detect openat syscall event on all cpus               : Ok
    4: Read samples using the mmap interface                 : Ok
    5: Test data source output                               : Ok
    6: Parse event definition strings                        : Ok
    7: Simple expression parser                              : Ok
    8: PERF_RECORD_* events & perf_sample fields             : Ok
    9: Parse perf pmu format                                 : Ok
   10: PMU events                                            :
   10.1: PMU event table sanity                              : Ok
   10.2: PMU event map aliases                               : Ok
   10.3: Parsing of PMU event table metrics                  : Skip (some metrics failed)
   11: DSO data read                                         : Ok
   12: DSO data cache                                        : Ok
   13: DSO data reopen                                       : Ok
   14: Roundtrip evsel->name                                 : Ok
   15: Parse sched tracepoints fields                        : Ok
   16: syscalls:sys_enter_openat event fields                : Ok
   17: Setup struct perf_event_attr                          : Ok
   18: Match and link multiple hists                         : Ok
   19: 'import perf' in python                               : Ok
   20: Breakpoint overflow signal handler                    : Ok
   21: Breakpoint overflow sampling                          : Ok
   22: Breakpoint accounting                                 : Ok
   23: Watchpoint                                            :
   23.1: Read Only Watchpoint                                : Skip
   23.2: Write Only Watchpoint                               : Ok
   23.3: Read / Write Watchpoint                             : Ok
   23.4: Modify Watchpoint                                   : Ok
   24: Number of exit events of a simple workload            : Ok
   25: Software clock events period values                   : Ok
   26: Object code reading                                   : Ok
   27: Sample parsing                                        : Ok
   28: Use a dummy software event to keep tracking           : Ok
   29: Parse with no sample_id_all bit set                   : Ok
   30: Filter hist entries                                   : Ok
   31: Lookup mmap thread                                    : Ok
   32: Share thread maps                                     : Ok
   33: Sort output of hist entries                           : Ok
   34: Cumulate child hist entries                           : Ok
   35: Track with sched_switch                               : Ok
   36: Filter fds with revents mask in a fdarray             : Ok
   37: Add fd to a fdarray, making it autogrow               : Ok
   38: kmod_path__parse                                      : Ok
   39: Thread map                                            : Ok
   40: LLVM search and compile                               :
   40.1: Basic BPF llvm compile                              : Ok
   40.2: kbuild searching                                    : Ok
   40.3: Compile source for BPF prologue generation          : Ok
   40.4: Compile source for BPF relocation                   : Ok
   41: Session topology                                      : Ok
   42: BPF filter                                            :
   42.1: Basic BPF filtering                                 : Ok
   42.2: BPF pinning                                         : Ok
   42.3: BPF prologue generation                             : Ok
   42.4: BPF relocation checker                              : Ok
   43: Synthesize thread map                                 : Ok
   44: Remove thread map                                     : Ok
   45: Synthesize cpu map                                    : Ok
   46: Synthesize stat config                                : Ok
   47: Synthesize stat                                       : Ok
   48: Synthesize stat round                                 : Ok
   49: Synthesize attr update                                : Ok
   50: Event times                                           : Ok
   51: Read backward ring buffer                             : Ok
   52: Print cpu map                                         : Ok
   53: Merge cpu map                                         : Ok
   54: Probe SDT events                                      : Ok
   55: is_printable_array                                    : Ok
   56: Print bitmap                                          : Ok
   57: perf hooks                                            : Ok
   58: builtin clang support                                 : Skip (not compiled in)
   59: unit_number__scnprintf                                : Ok
   60: mem2node                                              : Ok
   61: time utils                                            : Ok
   62: Test jit_write_elf                                    : Ok
   63: Test libpfm4 support                                  : Skip (not compiled in)
   64: Test api io                                           : Ok
   65: maps__merge_in                                        : Ok
   66: Demangle Java                                         : Ok
   67: x86 rdpmc                                             : Ok
   68: Convert perf time to TSC                              : Ok
   69: DWARF unwind                                          : Ok
   70: x86 instruction decoder - new instructions            : Ok
   71: Intel PT packet decoder                               : Ok
   72: x86 bp modify                                         : Ok
   73: probe libc's inet_pton & backtrace it with ping       : Ok
   74: Use vfs_getname probe to get syscall args filenames   : Ok
   75: Add vfs_getname probe to get syscall args filenames   : Ok
   76: Check open filename arg using perf trace + vfs_getname: Ok
   77: Zstd perf.data compression/decompression              : Ok
   #
 
   $ git log --oneline -1 ; make -C tools/perf build-test
   25d4e7f513 (HEAD -> perf/urgent) tools arch kvm: Sync kvm headers with the kernel sources
   make: Entering directory '/home/acme/git/perf/tools/perf'
   - tarpkg: ./tests/perf-targz-src-pkg .
         make_no_libbpf_DEBUG_O: make NO_LIBBPF=1 DEBUG=1
             make_no_auxtrace_O: make NO_AUXTRACE=1
                 make_no_gtk2_O: make NO_GTK2=1
          make_with_clangllvm_O: make LIBCLANGLLVM=1
              make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
          make_no_syscall_tbl_O: make NO_SYSCALL_TABLE=1
             make_no_demangle_O: make NO_DEMANGLE=1
                make_no_slang_O: make NO_SLANG=1
               make_no_libbpf_O: make NO_LIBBPF=1
   make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
               make_no_libelf_O: make NO_LIBELF=1
                    make_help_O: make help
                 make_install_O: make install
                   make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
                   make_debug_O: make DEBUG=1
              make_no_libperl_O: make NO_LIBPERL=1
             make_install_bin_O: make install-bin
                     make_doc_O: make doc
            make_no_libbionic_O: make NO_LIBBIONIC=1
                    make_tags_O: make tags
                 make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1 NO_LIBZSTD=1 NO_LIBCAP=1 NO_SYSCALL_TABLE=1
            make_no_backtrace_O: make NO_BACKTRACE=1
                  make_static_O: make LDFLAGS=-static NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 NO_JVMTI=1
                    make_pure_O: make
        make_util_pmu_bison_o_O: make util/pmu-bison.o
                  make_perf_o_O: make perf.o
              make_no_libnuma_O: make NO_LIBNUMA=1
    make_install_prefix_slash_O: make install prefix=/tmp/krava/
             make_no_libaudit_O: make NO_LIBAUDIT=1
                  make_cscope_O: make cscope
            make_with_libpfm4_O: make LIBPFM4=1
            make_no_libcrypto_O: make NO_LIBCRYPTO=1
               make_clean_all_O: make clean all
            make_no_libpython_O: make NO_LIBPYTHON=1
          make_install_prefix_O: make install prefix=/tmp/krava
         make_with_babeltrace_O: make LIBBABELTRACE=1
            make_no_libunwind_O: make NO_LIBUNWIND=1
                 make_no_newt_O: make NO_NEWT=1
              make_util_map_o_O: make util/map.o
                  make_no_sdt_O: make NO_SDT=1
   OK
   make: Leaving directory '/home/acme/git/perf/tools/perf'
   $
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXxRCDgAKCRCyPKLppCJ+
 J9mzAQD2InaZH4Blcx/ChVpe8CVWn31PJP1/dc73Y+9WlVNZ2AD8DLHaUJehe4TJ
 EykQqfv1W4ETxxU2FNX9TkdA/7cNLQU=
 =hx9+
 -----END PGP SIGNATURE-----

Merge tag 'perf-tools-fixes-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into master

Pull perf tooling fixes from Arnaldo Carvalho de Melo:

 - Update hashmap.h from libbpf and kvm.h from x86's kernel UAPI.

 - Set opt->set in libsubcmd's OPT_CALLBACK_SET(). This fixes
   'perf record --switch-output-event event-name' usage"

* tag 'perf-tools-fixes-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  tools arch kvm: Sync kvm headers with the kernel sources
  perf tools: Sync hashmap.h with libbpf's
  libsubcmd: Fix OPT_CALLBACK_SET()
2020-07-19 12:35:07 -07:00
Linus Torvalds
721db9dfb1 powerpc fixes for 5.8 #7
A fix to the VAS code we merged this cycle, to report the proper error code to
 userspace for address translation failures. And a selftest update to match.
 
 Another fix for our pkey handling of PROT_EXEC mappings.
 
 A fix for a crash when booting a "secure VM" under an ultravisor with certain
 numbers of CPUs.
 
 Thanks to:
   Aneesh Kumar K.V, Haren Myneni, Laurent Dufour, Sandipan Das, Satheesh
   Rajendran, Thiago Jung Bauermann.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl8S7Q8THG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgA9WEAC580vTBCte54XEpRPfKLs0g/piM93z
 +rDDKFFkHrxI+EpySeg20jlDMc/3EoevLN6UNT5I2hrZ5QcNF17RPVmjRoHP0w2l
 ixy9B6Y+auFwos1yEec14ZLJ7iWsnko0SlgtWIAsn9r35hJYFtC3+ho3/XWO0lnF
 0jb31uZim4nFQvGSNwe3oZ3/rJsKwWtPZw0WznFr9GB4pMOnrspV/zx796RI9OKY
 khwm4y6pas5Duk9GUJPJjOIk4Mag4yLTXuhzJ5G5UeuUchZRxCTVcdnXEdGXeyte
 9ZJnRjbvbDjTM9qyk2lPSHv5zFHfEbglDkp2zoKX2Ie083LIcKlkwgeFvlBjhdxQ
 qwko27DXIZdmKTsSiFDODI0VlyK3ZHumCX/m2Ctg9/VmeSiYacebQjcS7DmAwQeE
 6h2bRL2TiTLRkgWiD4HOvHZZTy22pVgRcYe/pwGzMMXJW6SLQ9GUOhhar4XEYMgj
 pzn86uZRVJLf90qdUkI9sl8p/PthGlfehqHivfwgKYk/0H1AyGkChO3NB1mLiCfS
 WC+7J/lDIvtAMnC+536LqZT5l46ntt5RQ5tUcHfvn4bFoh5ndeav0Y9hXEXblyYI
 32lYj/paAmzR2kuHOzOQAa4hwy9rnKEQiGYsF1RcpMO5zdNupXl/EPY5WaKYyEx7
 p+eGalBNTf8zuw==
 =eEXz
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux into master

Pull powerpc fixes from Michael Ellerman:
 "Some more powerpc fixes for 5.8:

   - A fix to the VAS code we merged this cycle, to report the proper
     error code to userspace for address translation failures. And a
     selftest update to match.

   - Another fix for our pkey handling of PROT_EXEC mappings.

   - A fix for a crash when booting a "secure VM" under an ultravisor
     with certain numbers of CPUs.

  Thanks to: Aneesh Kumar K.V, Haren Myneni, Laurent Dufour, Sandipan
  Das, Satheesh Rajendran, Thiago Jung Bauermann"

* tag 'powerpc-5.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Use proper error code to check fault address
  powerpc/vas: Report proper error code for address translation failure
  powerpc/pseries/svm: Fix incorrect check for shared_lppaca_size
  powerpc/book3s64/pkeys: Fix pkey_access_permitted() for execute disable pkey
2020-07-18 10:45:17 -07:00
Paolo Pisati
aba69d49fb selftests: net: ip_defrag: modprobe missing nf_defrag_ipv6 support
Fix ip_defrag.sh when CONFIG_NF_DEFRAG_IPV6=m:

$ sudo ./ip_defrag.sh
+ set -e
+ mktemp -u XXXXXX
+ readonly NETNS=ns-rGlXcw
+ trap cleanup EXIT
+ setup
+ ip netns add ns-rGlXcw
+ ip -netns ns-rGlXcw link set lo up
+ ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_high_thresh=9000000
+ ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_low_thresh=7000000
+ ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_time=1
+ ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_high_thresh=9000000
+ ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_low_thresh=7000000
+ ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_time=1
+ ip netns exec ns-rGlXcw sysctl -w net.netfilter.nf_conntrack_frag6_high_thresh=9000000
+ cleanup
+ ip netns del ns-rGlXcw

$ ls -la /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh
ls: cannot access '/proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh': No such file or directory

$ sudo modprobe nf_defrag_ipv6
$ ls -la /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh
-rw-r--r-- 1 root root 0 Jul 14 12:34 /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh

Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17 12:49:18 -07:00
Arnaldo Carvalho de Melo
25d4e7f513 tools arch kvm: Sync kvm headers with the kernel sources
To pick up the changes from:

  83d31e5271 ("KVM: nVMX: fixes for preemption timer migration")

That don't entail changes in tooling.

This silences these tools/perf build warnings:

  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
  diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-17 09:39:16 -03:00
Arnaldo Carvalho de Melo
94fddb7ad0 perf tools: Sync hashmap.h with libbpf's
To pick up the changes in:

  b2f9f1535b ("libbpf: Fix libbpf hashmap on (I)LP32 architectures")

Silencing this warning:

  Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h'
  diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h

I'll eventually update the warning to remove the "Kernel ABI" part
and instead state libbpf when noticing that the original is at
"tools/lib/something".

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Jakub Bogusz <qboosh@pld-linux.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-17 09:35:18 -03:00
Ravi Bangoria
a2db71b912 libsubcmd: Fix OPT_CALLBACK_SET()
Any option macro with _SET suffix should set opt->set variable which is
not happening for OPT_CALLBACK_SET(). This is causing issues with perf
record --switch-output-event. Fix that.

Before:

  # ./perf record --overwrite -e sched:*switch,syscalls:sys_enter_mmap \
           --switch-output-event syscalls:sys_enter_mmap
  ^C[ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.297 MB perf.data (657 samples) ]

After:

  $ ./perf record --overwrite -e sched:*switch,syscalls:sys_enter_mmap \
          --switch-output-event syscalls:sys_enter_mmap
  [ perf record: dump data: Woken up 1 times ]
  [ perf record: Dump perf.data.2020061918144542 ]
  [ perf record: dump data: Woken up 1 times ]
  [ perf record: Dump perf.data.2020061918144608 ]
  [ perf record: dump data: Woken up 1 times ]
  [ perf record: Dump perf.data.2020061918144660 ]
  ^C[ perf record: dump data: Woken up 1 times ]
  [ perf record: Dump perf.data.2020061918144784 ]
  [ perf record: Woken up 0 times to write data ]
  [ perf record: Dump perf.data.2020061918144803 ]
  [ perf record: Captured and wrote 0.419 MB perf.data.<timestamp> ]

Fixes: 636eb4d001 ("libsubcmd: Introduce OPT_CALLBACK_SET()")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200619133412.50705-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-17 09:33:06 -03:00
Haren Myneni
f0479c4bcb selftests/powerpc: Use proper error code to check fault address
ERR_NX_TRANSLATION(CSB.CC=5) is for internal to VAS for fault handling
and should not used by OS. ERR_NX_AT_FAULT(CSB.CC=250) is the proper
error code should be reported by OS when NX encounters address
translation failure.

This patch uses CC=250 to determine the fault address when the request
is not successful.

Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0315251705baff94f678c33178491b5008723511.camel@linux.ibm.com
2020-07-15 23:10:17 +10:00
Paolo Pisati
651149f603 selftests: fib_nexthop_multiprefix: fix cleanup() netns deletion
During setup():
...
        for ns in h0 r1 h1 h2 h3
        do
                create_ns ${ns}
        done
...

while in cleanup():
...
        for n in h1 r1 h2 h3 h4
        do
                ip netns del ${n} 2>/dev/null
        done
...

and after removing the stderr redirection in cleanup():

$ sudo ./fib_nexthop_multiprefix.sh
...
TEST: IPv4: host 0 to host 3, mtu 1400                              [ OK ]
TEST: IPv6: host 0 to host 3, mtu 1400                              [ OK ]
Cannot remove namespace file "/run/netns/h4": No such file or directory
$ echo $?
1

and a non-zero return code, make kselftests fail (even if the test
itself is fine):

...
not ok 34 selftests: net: fib_nexthop_multiprefix.sh # exit=1
...

Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 15:06:12 -07:00
Linus Torvalds
5a764898af Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

 1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking
    BPF programs, from Maciej Żenczykowski.

 2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu
    Mariappan.

 3) Slay memory leak in nl80211 bss color attribute parsing code, from
    Luca Coelho.

 4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin.

 5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric
    Dumazet.

 6) xsk code dips too deeply into DMA mapping implementation internals.
    Add dma_need_sync and use it. From Christoph Hellwig

 7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko.

 8) Check for disallowed attributes when loading flow dissector BPF
    programs. From Lorenz Bauer.

 9) Correct packet injection to L3 tunnel devices via AF_PACKET, from
    Jason A. Donenfeld.

10) Don't advertise checksum offload on ipa devices that don't support
    it. From Alex Elder.

11) Resolve several issues in TCP MD5 signature support. Missing memory
    barriers, bogus options emitted when using syncookies, and failure
    to allow md5 key changes in established states. All from Eric
    Dumazet.

12) Fix interface leak in hsr code, from Taehee Yoo.

13) VF reset fixes in hns3 driver, from Huazhong Tan.

14) Make loopback work again with ipv6 anycast, from David Ahern.

15) Fix TX starvation under high load in fec driver, from Tobias
    Waldekranz.

16) MLD2 payload lengths not checked properly in bridge multicast code,
    from Linus Lüssing.

17) Packet scheduler code that wants to find the inner protocol
    currently only works for one level of VLAN encapsulation. Allow
    Q-in-Q situations to work properly here, from Toke
    Høiland-Jørgensen.

18) Fix route leak in l2tp, from Xin Long.

19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport
    support and various protocols. From Martin KaFai Lau.

20) Fix socket cgroup v2 reference counting in some situations, from
    Cong Wang.

21) Cure memory leak in mlx5 connection tracking offload support, from
    Eli Britstein.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
  mlxsw: pci: Fix use-after-free in case of failed devlink reload
  mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON()
  net: macb: fix call to pm_runtime in the suspend/resume functions
  net: macb: fix macb_suspend() by removing call to netif_carrier_off()
  net: macb: fix macb_get/set_wol() when moving to phylink
  net: macb: mark device wake capable when "magic-packet" property present
  net: macb: fix wakeup test in runtime suspend/resume routines
  bnxt_en: fix NULL dereference in case SR-IOV configuration fails
  libbpf: Fix libbpf hashmap on (I)LP32 architectures
  net/mlx5e: CT: Fix memory leak in cleanup
  net/mlx5e: Fix port buffers cell size value
  net/mlx5e: Fix 50G per lane indication
  net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash
  net/mlx5e: Fix VXLAN configuration restore after function reload
  net/mlx5e: Fix usage of rcu-protected pointer
  net/mxl5e: Verify that rpriv is not NULL
  net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode
  net/mlx5: Fix eeprom support for SFP module
  cgroup: Fix sock_cgroup_data on big-endian.
  selftests: bpf: Fix detach from sockmap tests
  ...
2020-07-10 18:16:22 -07:00
Jean-Philippe Brucker
55b244221c selftests/bpf: Fix cgroup sockopt verifier test
Since the BPF_PROG_TYPE_CGROUP_SOCKOPT verifier test does not set an
attach type, bpf_prog_load_check_attach() disallows loading the program
and the test is always skipped:

 #434/p perfevent for cgroup sockopt SKIP (unsupported program type 25)

Fix the issue by setting a valid attach type.

Fixes: 0456ea170c ("bpf: Enable more helpers for BPF_PROG_TYPE_CGROUP_{DEVICE,SYSCTL,SOCKOPT}")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200710150439.126627-1-jean-philippe@linaro.org
2020-07-11 01:32:15 +02:00
Linus Torvalds
0f318cba1e linux-kselftest-fixes-5.8-rc5
This Kselftest fixes update for Linux 5.8-rc5 consists of tmp2 test
 changes to run on python3 and kselftest framework fix to incorrect
 return type.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl8ImAcACgkQCwJExA0N
 QxwEPg//fYS/ilgwYRn+Zc9fV/JPGYBfJKN1DdAua0fRgXjcz2z3dMON7Tt/HBNY
 KZDCDJMY4SSPBAdHRt/2duQx21C0i8zVcCBsPgZPhJdPF5tUIbD4oM0qCxrto1hB
 Wss1UHWmobB+BPI7mJSPFirYXyVqVXcpdYJmKkRYbpJTFRS2t1g5jFczZVgEbeEv
 7lEY4yRi2hlGsCR4J+VqIUzyY+enc0vSYNaSaH8d4P1cC8h5Dl7MoqSIJshrNcDe
 kHz5l5R7cQSOQhsSIwvRuEolkmjyB0ejzuUsAQ6fwRKGMTVWlY+2fWcu5dNelYMm
 C3BGyVcAPXsrMfX6Vw4AFRd1a/7XiuNOFwH4PkQeomfAh2Ml9m1pO3fdqWQlbnHu
 VpkIbPaiTyarEaIYvF6UnxUTB+hNzHxw8Ac6TvwP3xz26k7U4X4ue75s03DVA7qx
 63EsxY+gtAhD0ATUSpHq65ZgUSnQh5OAk0UB24h7kzxaE5EZ8gU8ifYqBPGiEot2
 3KQ1QLZdCTmuTxsjI+OdXdOAnFuhqNtzk69CCS43YwDJitBLG6kz+aFgVWDZxkx1
 MY5msDi/ROyymiWEUCSZhE70qIhIU/tDKQ9+QeL4VqEhzfcGrgePtV+dsp6seKCl
 Swi2PY2zoCdq6gZshiiIQln/M5XaW8dPBvz+wKaRo/sMzwts18M=
 =pKoZ
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-fixes-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "TPM2 test changes to run on python3 and kselftest framework fix to
  incorrect return type"

* tag 'linux-kselftest-fixes-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kselftest: ksft_test_num return type should be unsigned
  selftests: tpm: upgrade TPM2 tests from Python 2 to Python 3
2020-07-10 10:15:37 -07:00
Jakub Bogusz
b2f9f1535b libbpf: Fix libbpf hashmap on (I)LP32 architectures
On ILP32, 64-bit result was shifted by value calculated for 32-bit long type
and returned value was much outside hashmap capacity.
As advised by Andrii Nakryiko, this patch uses different hashing variant for
architectures with size_t shorter than long long.

Fixes: e3b9242240 ("libbpf: add resizable non-thread safe internal hashmap")
Signed-off-by: Jakub Bogusz <qboosh@pld-linux.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200709225723.1069937-1-andriin@fb.com
2020-07-09 19:38:55 -07:00
Lorenz Bauer
f43cb0d672 selftests: bpf: Fix detach from sockmap tests
Fix sockmap tests which rely on old bpf_prog_dispatch behaviour.
In the first case, the tests check that detaching without giving
a program succeeds. Since these are not the desired semantics,
invert the condition. In the second case, the clean up code doesn't
supply the necessary program fds.

Fixes: bb0de3131f ("bpf: sockmap: Require attach_bpf_fd when detaching a program")
Reported-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200709115151.75829-1-lmb@cloudflare.com
2020-07-09 23:41:37 +02:00
Linus Torvalds
ce69fb3b39 Refactor kallsyms_show_value() users for correct cred
Several users of kallsyms_show_value() were performing checks not
 during "open". Refactor everything needed to gain proper checks against
 file->f_cred for modules, kprobes, and bpf.
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAl8GUbMWHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJohnD/9VsPsAMV+8lhsPvkcuW/DkTcAY
 qUEzsXU3v06gJ0Z/1lBKtisJ6XmD93wWcZCTFvJ0S8vR3yLZvOVfToVjCMO32Trc
 4ZkWTPwpvfeLug6T6CcI2ukQdZ/opI1cSabqGl79arSBgE/tsghwrHuJ8Exkz4uq
 0b7i8nZa+RiTezwx4EVeGcg6Dv1tG5UTG2VQvD/+QGGKneBlrlaKlI885N/6jsHa
 KxvB7+8ES1pnfGYZenx+RxMdljNrtyptbQEU8gyvoV5YR7635gjZsVsPwWANJo+4
 EGcFFpwWOAcVQaC3dareLTM8nVngU6Wl3Rd7JjZtjvtZba8DdCn669R34zDGXbiP
 +1n1dYYMSMBeqVUbAQfQyLD0pqMIHdwQj2TN8thSGccr2o3gNk6AXgYq0aYm8IBf
 xDCvAansJw9WqmxErIIsD4BFkMqF7MjH3eYZxwCPWSrKGDvKxQSPV5FarnpDC9U7
 dYCWVxNPmtn+unC/53yXjEcBepKaYgNR7j5G7uOfkHvU43Bd5demzLiVJ10D8abJ
 ezyErxxEqX2Gr7JR2fWv7iBbULJViqcAnYjdl0y0NgK/hftt98iuge6cZmt1z6ai
 24vI3X4VhvvVN5/f64cFDAdYtMRUtOo2dmxdXMid1NI07Mj2qFU1MUwb8RHHlxbK
 8UegV2zcrBghnVuMkw==
 =ib5Q
 -----END PGP SIGNATURE-----

Merge tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull kallsyms fix from Kees Cook:
 "Refactor kallsyms_show_value() users for correct cred.

  I'm not delighted by the timing of getting these changes to you, but
  it does fix a handful of kernel address exposures, and no one has
  screamed yet at the patches.

  Several users of kallsyms_show_value() were performing checks not
  during "open". Refactor everything needed to gain proper checks
  against file->f_cred for modules, kprobes, and bpf"

* tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  selftests: kmod: Add module address visibility test
  bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok()
  kprobes: Do not expose probe addresses to non-CAP_SYSLOG
  module: Do not expose section addresses to non-CAP_SYSLOG
  module: Refactor section attr into bin attribute
  kallsyms: Refactor kallsyms_show_value() to take cred
2020-07-09 13:09:30 -07:00
Kees Cook
2c79583927 selftests: kmod: Add module address visibility test
Make sure we don't regress the CAP_SYSLOG behavior of the module address
visibility via /proc/modules nor /sys/module/*/sections/*.

Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-08 16:01:36 -07:00
Linus Torvalds
6ec4476ac8 Raise gcc version requirement to 4.9
I realize that we fairly recently raised it to 4.8, but the fact is, 4.9
is a much better minimum version to target.

We have a number of workarounds for actual bugs in pre-4.9 gcc versions
(including things like internal compiler errors on ARM), but we also
have some syntactic workarounds for lacking features.

In particular, raising the minimum to 4.9 means that we can now just
assume _Generic() exists, which is likely the much better replacement
for a lot of very convoluted built-time magic with conditionals on
sizeof and/or __builtin_choose_expr() with same_type() etc.

Using _Generic also means that you will need to have a very recent
version of 'sparse', but thats easy to build yourself, and much less of
a hassle than some old gcc version can be.

The latest (in a long string) of reasons for minimum compiler version
upgrades was commit 5435f73d5c ("efi/x86: Fix build with gcc 4").

Ard points out that RHEL 7 uses gcc-4.8, but the people who stay back on
old RHEL versions persumably also don't build their own kernels anyway.
And maybe they should cross-built or just have a little side affair with
a newer compiler?

Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-08 10:48:35 -07:00
Linus Torvalds
dcde237b9b Second batch of perf tooling fixes for v5.8:
- Intel PT fixes for PEBS-via-PT with registers.
 
 - Fixes for Intel PT python based GUI.
 
 - Avoid duplicated sideband events with Intel PT in system wide tracing.
 
 - Remove needless 'dummy' event from TUI menu, used when synthesizing
   meta data events for pre-existing processes.
 
 - Fix corner case segfault when pressing enter in a screen without
   entries in the TUI for report/top.
 
 - Fixes for time stamp handling in libtraceevent.
 
 - Explicitly set utf-8 encoding in perf flamegraph.
 
 - Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy',
   silencing perf build warning.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 
 Test results:
 
 The first ones are container based builds of tools/perf with and without libelf
 support.  Where clang is available, it is also used to build perf with/without
 libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang
 when clang and its devel libraries are installed.
 
 The objtool and samples/bpf/ builds are disabled now that I'm switching from
 using the sources in a local volume to fetching them from a http server to
 build it inside the container, to make it easier to build in a container cluster.
 Those will come back later.
 
 Several are cross builds, the ones with -x-ARCH and the android one, and those
 may not have all the features built, due to lack of multi-arch devel packages,
 available and being used so far on just a few, like
 debian:experimental-x-{arm64,mipsel}.
 
 The 'perf test' one will perform a variety of tests exercising
 tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
 with a variety of command line event specifications to then intercept the
 sys_perf_event syscall to check that the perf_event_attr fields are set up as
 expected, among a variety of other unit tests.
 
 Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
 with a variety of feature sets, exercising the build with an incomplete set of
 features as well as with a complete one. It is planned to have it run on each
 of the containers mentioned above, using some container orchestration
 infrastructure. Get in contact if interested in helping having this in place.
 
 Some of the most recent, experimental distros are failing, fixes will be
 provided, but those gcc/clang versions are not yet in general use and some
 are related to linking with libllvm, not the default build.
 
   Mon 06 Jul 2020 10:07:28 AM -03
   # export PERF_TARBALL=http://192.168.124.1/perf/perf-5.8.0-rc3.tar.xz
   # dm
    1 alpine:3.4                    : Ok   gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final)
    2 alpine:3.5                    : Ok   gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final)
    3 alpine:3.6                    : Ok   gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final)
    4 alpine:3.7                    : Ok   gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0)
    5 alpine:3.8                    : Ok   gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1)
    6 alpine:3.9                    : Ok   gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1)
    7 alpine:3.10                   : Ok   gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
    8 alpine:3.11                   : Ok   gcc (Alpine 9.2.0) 9.2.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0)
    9 alpine:3.12                   : Ok   gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
   10 alpine:edge                   : Ok   gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (git://git.alpinelinux.org/aports 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
   11 alt:p8                        : Ok   x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final)
   12 alt:p9                        : Ok   x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 7.0.1
   13 alt:sisyphus                  : Ok   x86_64-alt-linux-gcc (GCC) 9.2.1 20200123 (ALT Sisyphus 9.2.1-alt3), clang version 10.0.0
   14 amazonlinux:1                 : Ok   gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final)
   15 amazonlinux:2                 : Ok   gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2)
   16 android-ndk:r12b-arm          : Ok   arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
   17 android-ndk:r15c-arm          : Ok   arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
   18 centos:5                      : Ok   gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-55)
   19 centos:6                      : Ok   gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
   20 centos:7                      : Ok   gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39)
   21 centos:8                      : Ok   gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 9.0.1 (Red Hat 9.0.1-2.module_el8.2.0+309+0c7b6b03)
   22 clearlinux:latest             : Ok   gcc (Clear Linux OS for Intel Architecture) 10.1.1 20200618 releases/gcc-10.1.0-218-g6e81b0cf4f, clang version 10.0.0
   23 debian:8                      : Ok   gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
   24 debian:9                      : Ok   gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final)
   25 debian:10                     : Ok   gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8 (tags/RELEASE_701/final)
   26 debian:experimental           : FAIL gcc (Debian 9.3.0-13) 9.3.0, clang version 9.0.1-12
 
   # grep "make ARCH" dm.log/debian\:experimental
   + make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= -C /git/linux/tools/perf O=/tmp/build/perf
   + make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBELF=1 -C /git/linux/tools/perf O=/tmp/build/perf
   + make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBBPF=1 -C /git/linux/tools/perf O=/tmp/build/perf
   + make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
   + make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBELF=1 -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
   + make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBBPF=1 -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
   + make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= LIBCLANGLLVM=1 -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
   <SNIP>
   /usr/bin/ld: /usr/lib/llvm-9/lib/libclangAnalysis.a(ExprMutationAnalyzer.cpp.o): in function `clang::ast_matchers::internal::matcher_ignoringImpCasts0Matcher::matches(clang::Expr const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const':
   (.text._ZNK5clang12ast_matchers8internal32matcher_ignoringImpCasts0Matcher7matchesERKNS_4ExprEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE[_ZNK5clang12ast_matchers8internal32matcher_ignoringImpCasts0Matcher7matchesERKNS_4ExprEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE]+0x43): undefined reference to `clang::ast_matchers::internal::DynTypedMatcher::matches(clang::ast_type_traits::DynTypedNode const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const'
   /usr/bin/ld: /usr/lib/llvm-9/lib/libclangAnalysis.a(ExprMutationAnalyzer.cpp.o): in function `clang::ast_matchers::internal::matcher_hasLoopVariable0Matcher::matches(clang::CXXForRangeStmt const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const':
   (.text._ZNK5clang12ast_matchers8internal31matcher_hasLoopVariable0Matcher7matchesERKNS_15CXXForRangeStmtEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE[_ZNK5clang12ast_matchers8internal31matcher_hasLoopVariable0Matcher7matchesERKNS_15CXXForRangeStmtEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE]+0x48): undefined reference to `clang::ast_matchers::internal::DynTypedMatcher::matches(clang::ast_type_traits::DynTypedNode const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const'
   /usr/bin/ld: /usr/lib/llvm-9/lib/libclangAnalysis.a(ExprMutationAnalyzer.cpp.o): in function `clang::ast_matchers::internal::matcher_hasRangeInit0Matcher::matches(clang::CXXForRangeStmt const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const':
   (.text._ZNK5clang12ast_matchers8internal28matcher_hasRangeInit0Matcher7matchesERKNS_15CXXForRangeStmtEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE[_ZNK5clang12ast_matchers8internal28matcher_hasRangeInit0Matcher7matchesERKNS_15CXXForRangeStmtEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE]+0x48): undefined reference to `clang::ast_matchers::internal::DynTypedMatcher::matches(clang::ast_type_traits::DynTypedNode const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const'
   /usr/bin/ld: /usr/lib/llvm-9/lib/libclangAnalysis.a(ExprMutationAnalyzer.cpp.o): in function `clang::ast_matchers::internal::matcher_hasArgumentOfType0Matcher::matches(clang::UnaryExprOrTypeTraitExpr const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const':
   (.text._ZNK5clang12ast_matchers8internal33matcher_hasArgumentOfType0Matcher7matchesERKNS_24UnaryExprOrTypeTraitExprEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE[_ZNK5clang12ast_matchers8internal33matcher_hasArgumentOfType0Matcher7matchesERKNS_24UnaryExprOrTypeTraitExprEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE]+0x36): undefined reference to `clang::ast_matchers::internal::DynTypedMatcher::matches(clang::ast_type_traits::DynTypedNode const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const'
   <SNIP>
   #
 
   27 debian:experimental-x-arm64   : Ok   aarch64-linux-gnu-gcc (Debian 9.3.0-8) 9.3.0
   28 debian:experimental-x-mips    : Ok   mips-linux-gnu-gcc (Debian 8.3.0-19) 8.3.0
   29 debian:experimental-x-mips64  : Ok   mips64-linux-gnuabi64-gcc (Debian 9.3.0-8) 9.3.0
   30 debian:experimental-x-mipsel  : Ok   mipsel-linux-gnu-gcc (Debian 9.2.1-8) 9.2.1 20190909
   31 fedora:20                     : Ok   gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
   32 fedora:22                     : Ok   gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final)
   33 fedora:23                     : Ok   gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final)
   34 fedora:24                     : Ok   gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final)
   35 fedora:24-x-ARC-uClibc        : Ok   arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
   36 fedora:25                     : Ok   gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final)
   37 fedora:26                     : Ok   gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final)
   38 fedora:27                     : Ok   gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final)
   39 fedora:28                     : Ok   gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final)
   40 fedora:29                     : Ok   gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29)
   41 fedora:30                     : Ok   gcc (GCC) 9.2.1 20190827 (Red Hat 9.2.1-1), clang version 8.0.0 (Fedora 8.0.0-3.fc30)
   42 fedora:30-x-ARC-glibc         : Ok   arc-linux-gcc (ARC HS GNU/Linux glibc toolchain 2019.03-rc1) 8.3.1 20190225
   43 fedora:30-x-ARC-uClibc        : Ok   arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
   44 fedora:31                     : Ok   gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 9.0.1 (Fedora 9.0.1-2.fc31)
   45 fedora:32                     : Ok   gcc (GCC) 10.1.1 20200507 (Red Hat 10.1.1-1), clang version 10.0.0 (Fedora 10.0.0-1.fc32)
   46 fedora:rawhide                : FAIL gcc (GCC) 10.1.1 20200507 (Red Hat 10.1.1-1), clang version 10.0.0 (Fedora 10.0.0-4.fc33)
 
     CC       /tmp/build/perf/util/mem2node.o
   util/scripting-engines/trace-event-python.c: In function 'python_start_script':
   util/scripting-engines/trace-event-python.c:1595:2: error: 'visibility' attribute ignored [-Werror=attributes]
    1595 |  PyMODINIT_FUNC (*initfunc)(void);
         |  ^~~~~~~~~~~~~~
     LD       /tmp/build/perf/util/intel-pt-decoder/perf-in.o
 
   47 gentoo-stage3-amd64:latest    : Ok   gcc (Gentoo 9.2.0-r2 p3) 9.2.0
   48 mageia:5                      : Ok   gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final)
   49 mageia:6                      : Ok   gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final)
   50 mageia:7                      : Ok   gcc (Mageia 8.3.1-0.20190524.1.mga7) 8.3.1 20190524, clang version 8.0.0 (Mageia 8.0.0-1.mga7)
   51:latestError: error creating container storage: the container name "cool_zhukovsky" is already in use by "bebca2836e01c65d0c08a2c93fd96fb4b22b1d5b7e5945c8c21cd313823cd5a3". You have to remove that container to be able to reuse that name.: that name is already in use
    22aro:latest                : Ok   , clang version 9.0.0 (tags/RELEASE_900/final)
   52 openmandriva:cooker           : Ok   gcc (GCC) 10.0.0 20200502 (OpenMandriva), clang version 10.0.1
   53 opensuse:15.0                 : Ok   gcc (SUSE Linux) 7.4.1 20190424 [gcc-7-branch revision 270538], clang version 5.0.1 (tags/RELEASE_501/final 312548)
   54 opensuse:15.1                 : Ok   gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
   55 opensuse:15.2                 : Ok   gcc (SUSE Linux) 7.5.0, clang version 9.0.1
   56 opensuse:42.3                 : Ok   gcc (SUSE Linux) 4.8.5, clang version 3.8.0 (tags/RELEASE_380/final 262553)
   57 opensuse:tumbleweed           : Ok   gcc (SUSE Linux) 10.1.1 20200625 [revision c91e43e9363bd119a695d64505f96539fa451bf2], clang version 10.0.0
   58 oraclelinux:6                 : Ok   gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
   59 oraclelinux:7                 : Ok   gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39.0.3)
   60 oraclelinux:8                 : Ok   gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5.0.3), clang version 9.0.1 (Red Hat 9.0.1-2.0.1.module+el8.2.0+5599+9ed9ef6d)
   61 ubuntu:12.04                  : Ok   gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3, Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0)
   62 ubuntu:14.04                  : Ok   gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
   63 ubuntu:16.04                  : Ok   gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
   64 ubuntu:16.04-x-arm            : Ok   arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
   65 ubuntu:16.04-x-arm64          : Ok   aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
   66 ubuntu:16.04-x-powerpc        : Ok   powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
   67 ubuntu:16.04-x-powerpc64      : Ok   powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
   68 ubuntu:16.04-x-powerpc64el    : Ok   powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
   69 ubuntu:16.04-x-s390           : Ok   s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
   70 ubuntu:18.04                  : Ok   gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
   71 ubuntu:18.04-x-arm            : Ok   arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
   72 ubuntu:18.04-x-arm64          : Ok   aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
   73 ubuntu:18.04-x-m68k           : Ok   m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
   74 ubuntu:18.04-x-powerpc        : Ok   powerpc-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
   75 ubuntu:18.04-x-powerpc64      : Ok   powerpc64-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
   76 ubuntu:18.04-x-powerpc64el    : Ok   powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
   77 ubuntu:18.04-x-riscv64        : Ok   riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
   78 ubuntu:18.04-x-s390           : Ok   s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
   79 ubuntu:18.04-x-sh4            : Ok   sh4-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
   80 ubuntu:18.04-x-sparc64        : Ok   sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
   81 ubuntu:18.10                  : Ok   gcc (Ubuntu 8.3.0-6ubuntu1~18.10.1) 8.3.0, clang version 7.0.0-3 (tags/RELEASE_700/final)
   82 ubuntu:19.04                  : Ok   gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0, clang version 8.0.0-3 (tags/RELEASE_800/final)
   83 ubuntu:19.04-x-alpha          : Ok   alpha-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
   84 ubuntu:19.04-x-arm64          : Ok   aarch64-linux-gnu-gcc (Ubuntu/Linaro 8.3.0-6ubuntu1) 8.3.0
   85 ubuntu:19.04-x-hppa           : Ok   hppa-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
   86 ubuntu:19.10                  : FAIL gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 9.0.0-2 (tags/RELEASE_900/final)
 
   [root@quaco ~]# grep "make ARCH" dm.log/ubuntu\:19.10
   + make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= -C /git/linux/tools/perf O=/tmp/build/perf
   + make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBELF=1 -C /git/linux/tools/perf O=/tmp/build/perf
   + make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBBPF=1 -C /git/linux/tools/perf O=/tmp/build/perf
   + make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
   + make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBELF=1 -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
   + make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBBPF=1 -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
   + make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= LIBCLANGLLVM=1 -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
   <SNIP>
   /usr/bin/ld: /usr/lib/llvm-9/lib/libclangAnalysis.a(ExprMutationAnalyzer.cpp.o): in function `clang::ast_matchers::internal::BindableMatcher<clang::Stmt> clang::ast_matchers::internal::VariadicFunction<clang::ast_matchers::internal::BindableMatcher<clang::Stmt>, clang::ast_matchers::internal::Matcher<clang::Expr>, &(clang::ast_matchers::internal::BindableMatcher<clang::Stmt> clang::ast_matchers::internal::makeDynCastAllOfComposite<clang::Stmt, clang::Expr>(llvm::ArrayRef<clang::ast_matchers::internal::Matcher<clang::Expr> const*>))>::operator()<clang::ast_matchers::internal::VariadicOperatorMatcher<clang::ast_matchers::internal::ArgumentAdaptingMatcherFunc<clang::ast_matchers::internal::HasAncestorMatcher, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc>, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc> >::Adaptor<clang::TypeLoc>, clang::ast_matchers::internal::ArgumentAdaptingMatcherFunc<clang::ast_matchers::internal::HasAncestorMatcher, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc>, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc> >::Adaptor<clang::Stmt> > >(clang::ast_matchers::internal::Matcher<clang::Expr> const&, clang::ast_matchers::internal::VariadicOperatorMatcher<clang::ast_matchers::internal::ArgumentAdaptingMatcherFunc<clang::ast_matchers::internal::HasAncestorMatcher, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc>, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc> >::Adaptor<clang::TypeLoc>, clang::ast_matchers::internal::ArgumentAdaptingMatcherFunc<clang::ast_matchers::internal::HasAncestorMatcher, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc>, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc> >::Adaptor<clang::Stmt> > const&) const':
   (.text._ZNK5clang12ast_matchers8internal16VariadicFunctionINS1_15BindableMatcherINS_4StmtEEENS1_7MatcherINS_4ExprEEEXadL_ZNS1_25makeDynCastAllOfCompositeIS4_S7_EENS3_IT_EEN4llvm8ArrayRefIPKNS6_IT0_EEEEEEEclIJNS1_23VariadicOperatorMatcherIJNS1_27ArgumentAdaptingMatcherFuncINS1_18HasAncestorMatcherENS1_8TypeListIJNS_4DeclENS_22NestedNameSpecifierLocES4_NS_7TypeLocEEEESS_E7AdaptorISR_EENSU_IS4_EEEEEEEES5_RKS8_DpRKT_[_ZNK5clang12ast_matchers8internal16VariadicFunctionINS1_15BindableMatcherINS_4StmtEEENS1_7MatcherINS_4ExprEEEXadL_ZNS1_25makeDynCastAllOfCompositeIS4_S7_EENS3_IT_EEN4llvm8ArrayRefIPKNS6_IT0_EEEEEEEclIJNS1_23VariadicOperatorMatcherIJNS1_27ArgumentAdaptingMatcherFuncINS1_18HasAncestorMatcherENS1_8TypeListIJNS_4DeclENS_22NestedNameSpecifierLocES4_NS_7TypeLocEEEESS_E7AdaptorISR_EENSU_IS4_EEEEEEEES5_RKS8_DpRKT_]+0x4e): undefined reference to `clang::ast_matchers::internal::DynTypedMatcher::dynCastTo(clang::ast_type_traits::ASTNodeKind) const'
   <SNIP>
 
   87 ubuntu:20.04                  : Ok   gcc (Ubuntu 9.3.0-10ubuntu2) 9.3.0, clang version 10.0.0-4ubuntu1
   #
 
   # uname -a
   Linux quaco 5.8.0-rc3+ #2 SMP Tue Jun 30 09:47:17 -03 2020 x86_64 x86_64 x86_64 GNU/Linux
   # git log --oneline -1
   bee9ca1c8a perf report TUI: Remove needless 'dummy' event from menu
   # perf version --build-options
   perf version 5.8.rc3.gbee9ca1c8a23
                    dwarf: [ on  ]  # HAVE_DWARF_SUPPORT
       dwarf_getlocations: [ on  ]  # HAVE_DWARF_GETLOCATIONS_SUPPORT
                    glibc: [ on  ]  # HAVE_GLIBC_SUPPORT
                     gtk2: [ on  ]  # HAVE_GTK2_SUPPORT
            syscall_table: [ on  ]  # HAVE_SYSCALL_TABLE_SUPPORT
                   libbfd: [ on  ]  # HAVE_LIBBFD_SUPPORT
                   libelf: [ on  ]  # HAVE_LIBELF_SUPPORT
                  libnuma: [ on  ]  # HAVE_LIBNUMA_SUPPORT
   numa_num_possible_cpus: [ on  ]  # HAVE_LIBNUMA_SUPPORT
                  libperl: [ on  ]  # HAVE_LIBPERL_SUPPORT
                libpython: [ on  ]  # HAVE_LIBPYTHON_SUPPORT
                 libslang: [ on  ]  # HAVE_SLANG_SUPPORT
                libcrypto: [ on  ]  # HAVE_LIBCRYPTO_SUPPORT
                libunwind: [ on  ]  # HAVE_LIBUNWIND_SUPPORT
       libdw-dwarf-unwind: [ on  ]  # HAVE_DWARF_SUPPORT
                     zlib: [ on  ]  # HAVE_ZLIB_SUPPORT
                     lzma: [ on  ]  # HAVE_LZMA_SUPPORT
                get_cpuid: [ on  ]  # HAVE_AUXTRACE_SUPPORT
                      bpf: [ on  ]  # HAVE_LIBBPF_SUPPORT
                      aio: [ on  ]  # HAVE_AIO_SUPPORT
                     zstd: [ on  ]  # HAVE_ZSTD_SUPPORT
   # perf test
    1: vmlinux symtab matches kallsyms                       : Ok
    2: Detect openat syscall event                           : Ok
    3: Detect openat syscall event on all cpus               : Ok
    4: Read samples using the mmap interface                 : Ok
    5: Test data source output                               : Ok
    6: Parse event definition strings                        : Ok
    7: Simple expression parser                              : Ok
    8: PERF_RECORD_* events & perf_sample fields             : Ok
    9: Parse perf pmu format                                 : Ok
   10: PMU events                                            :
   10.1: PMU event table sanity                              : Ok
   10.2: PMU event map aliases                               : Ok
   10.3: Parsing of PMU event table metrics                  : Skip (some metrics failed)
   11: DSO data read                                         : Ok
   12: DSO data cache                                        : Ok
   13: DSO data reopen                                       : Ok
   14: Roundtrip evsel->name                                 : Ok
   15: Parse sched tracepoints fields                        : Ok
   16: syscalls:sys_enter_openat event fields                : Ok
   17: Setup struct perf_event_attr                          : Ok
   18: Match and link multiple hists                         : Ok
   19: 'import perf' in python                               : Ok
   20: Breakpoint overflow signal handler                    : Ok
   21: Breakpoint overflow sampling                          : Ok
   22: Breakpoint accounting                                 : Ok
   23: Watchpoint                                            :
   23.1: Read Only Watchpoint                                : Skip
   23.2: Write Only Watchpoint                               : Ok
   23.3: Read / Write Watchpoint                             : Ok
   23.4: Modify Watchpoint                                   : Ok
   24: Number of exit events of a simple workload            : Ok
   25: Software clock events period values                   : Ok
   26: Object code reading                                   : FAILED!
 
 	see below
 
   27: Sample parsing                                        : Ok
   28: Use a dummy software event to keep tracking           : Ok
   29: Parse with no sample_id_all bit set                   : Ok
   30: Filter hist entries                                   : Ok
   31: Lookup mmap thread                                    : Ok
   32: Share thread maps                                     : Ok
   33: Sort output of hist entries                           : Ok
   34: Cumulate child hist entries                           : Ok
   35: Track with sched_switch                               : Ok
   36: Filter fds with revents mask in a fdarray             : Ok
   37: Add fd to a fdarray, making it autogrow               : Ok
   38: kmod_path__parse                                      : Ok
   39: Thread map                                            : Ok
   40: LLVM search and compile                               :
   40.1: Basic BPF llvm compile                              : Ok
   40.2: kbuild searching                                    : Ok
   40.3: Compile source for BPF prologue generation          : Ok
   40.4: Compile source for BPF relocation                   : Ok
   41: Session topology                                      : Ok
   42: BPF filter                                            :
   42.1: Basic BPF filtering                                 : Skip
   42.2: BPF pinning                                         : Skip
   42.3: BPF prologue generation                             : Skip
   42.4: BPF relocation checker                              : Skip
   43: Synthesize thread map                                 : Ok
   44: Remove thread map                                     : Ok
   45: Synthesize cpu map                                    : Ok
   46: Synthesize stat config                                : Ok
   47: Synthesize stat                                       : Ok
   48: Synthesize stat round                                 : Ok
   49: Synthesize attr update                                : Ok
   50: Event times                                           : Ok
   51: Read backward ring buffer                             : Ok
   52: Print cpu map                                         : Ok
   53: Merge cpu map                                         : Ok
   54: Probe SDT events                                      : Ok
   55: is_printable_array                                    : Ok
   56: Print bitmap                                          : Ok
   57: perf hooks                                            : Ok
   58: builtin clang support                                 : Skip (not compiled in)
   59: unit_number__scnprintf                                : Ok
   60: mem2node                                              : Ok
   61: time utils                                            : Ok
   62: Test jit_write_elf                                    : Ok
   63: Test libpfm4 support                                  : Skip (not compiled in)
   64: Test api io                                           : Ok
   65: maps__merge_in                                        : Ok
   66: Demangle Java                                         : Ok
   67: x86 rdpmc                                             : Ok
   68: Convert perf time to TSC                              : Ok
   69: DWARF unwind                                          : Ok
   70: x86 instruction decoder - new instructions            : Ok
   71: Intel PT packet decoder                               : Ok
   72: x86 bp modify                                         : Ok
   73: probe libc's inet_pton & backtrace it with ping       : Ok
   74: Use vfs_getname probe to get syscall args filenames   : Ok
   75: Add vfs_getname probe to get syscall args filenames   : Ok
   76: Check open filename arg using perf trace + vfs_getname: Ok
   77: Zstd perf.data compression/decompression              : Ok
 
 This started failing most of the time with recent kernels, being investigated:
 
   # perf test -v object |& tail
   On file address is: 0xc736ba
   Objdump command is: objdump -z -d --start-address=0xffffffff81a736ba --stop-address=0xffffffff81a7373a /lib/modules/5.8.0-rc3+/build/vmlinux
   Bytes read match those read by objdump
   Reading object code for memory address: 0xffffffffc028d010
   File is: /lib/modules/5.8.0-rc3+/kernel/arch/x86/crypto/crc32c-intel.ko
   On file address is: 0xffffffffc028d0a0
   dso__data_read_offset failed
   test child finished with -1
   ---- end ----
   Object code reading: FAILED!
   #
 
 Noticed so far only with crc32c-intel.ko, seems related to:
 
   02213cec64 ("perf maps: Mark module DSOs with kernel type")
 
 Investigation ongoing.
 
   $ git log --oneline -1 ; time make -C tools/perf build-test
   bee9ca1c8a (HEAD -> perf/urgent, quaco/perf/urgent) perf report TUI: Remove needless 'dummy' event from menu
   make: Entering directory '/home/acme/git/perf/tools/perf'
   - tarpkg: ./tests/perf-targz-src-pkg .
              make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
               make_clean_all_O: make clean all
                   make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
                  make_no_sdt_O: make NO_SDT=1
         make_no_libbpf_DEBUG_O: make NO_LIBBPF=1 DEBUG=1
                    make_tags_O: make tags
                make_no_slang_O: make NO_SLANG=1
                  make_perf_o_O: make perf.o
               make_no_libbpf_O: make NO_LIBBPF=1
                   make_debug_O: make DEBUG=1
            make_with_libpfm4_O: make LIBPFM4=1
                 make_no_newt_O: make NO_NEWT=1
             make_no_demangle_O: make NO_DEMANGLE=1
                 make_no_gtk2_O: make NO_GTK2=1
          make_install_prefix_O: make install prefix=/tmp/krava
            make_no_libbionic_O: make NO_LIBBIONIC=1
   make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
            make_no_libpython_O: make NO_LIBPYTHON=1
                  make_static_O: make LDFLAGS=-static NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 NO_JVMTI=1
              make_no_libnuma_O: make NO_LIBNUMA=1
            make_no_libcrypto_O: make NO_LIBCRYPTO=1
                    make_help_O: make help
             make_no_auxtrace_O: make NO_AUXTRACE=1
              make_util_map_o_O: make util/map.o
          make_with_clangllvm_O: make LIBCLANGLLVM=1
                     make_doc_O: make doc
                    make_pure_O: make
             make_no_libaudit_O: make NO_LIBAUDIT=1
            make_no_libunwind_O: make NO_LIBUNWIND=1
          make_no_syscall_tbl_O: make NO_SYSCALL_TABLE=1
        make_util_pmu_bison_o_O: make util/pmu-bison.o
              make_no_libperl_O: make NO_LIBPERL=1
                 make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1 NO_LIBZSTD=1 NO_LIBCAP=1 NO_SYSCALL_TABLE=1
            make_no_backtrace_O: make NO_BACKTRACE=1
             make_install_bin_O: make install-bin
                 make_install_O: make install
    make_install_prefix_slash_O: make install prefix=/tmp/krava/
         make_with_babeltrace_O: make LIBBABELTRACE=1
               make_no_libelf_O: make NO_LIBELF=1
   OK
   make: Leaving directory '/home/acme/git/perf/tools/perf'
   $
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXwTWegAKCRCyPKLppCJ+
 J/4VAQCI6b9KdpTOhoMJTI6qyQDA68JsACOSYisbeSskFOv1zgD9F45oFMpAzFvG
 OsF81U2q+9DcjBHe8UlPrDbjUEGyfwo=
 =l1jZ
 -----END PGP SIGNATURE-----

Merge tag 'perf-tools-fixes-2020-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tooling fixes from Arnaldo Carvalho de Melo:

 - Intel PT fixes for PEBS-via-PT with registers

 - Fixes for Intel PT python based GUI

 - Avoid duplicated sideband events with Intel PT in system wide tracing

 - Remove needless 'dummy' event from TUI menu, used when synthesizing
   meta data events for pre-existing processes

 - Fix corner case segfault when pressing enter in a screen without
   entries in the TUI for report/top

 - Fixes for time stamp handling in libtraceevent

 - Explicitly set utf-8 encoding in perf flamegraph

 - Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy',
   silencing perf build warning

* tag 'perf-tools-fixes-2020-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf report TUI: Remove needless 'dummy' event from menu
  perf intel-pt: Fix PEBS sample for XMM registers
  perf intel-pt: Fix displaying PEBS-via-PT with registers
  perf intel-pt: Fix recording PEBS-via-PT with registers
  perf report TUI: Fix segmentation fault in perf_evsel__hists_browse()
  tools lib traceevent: Add proper KBUFFER_TYPE_TIME_STAMP handling
  tools lib traceevent: Add API to read time information from kbuffer
  perf scripts python: exported-sql-viewer.py: Fix time chart call tree
  perf scripts python: exported-sql-viewer.py: Fix zero id in call tree 'Find' result
  perf scripts python: exported-sql-viewer.py: Fix zero id in call graph 'Find' result
  perf scripts python: exported-sql-viewer.py: Fix unexpanded 'Find' result
  perf record: Fix duplicated sideband events with Intel PT system wide tracing
  perf scripts python: export-to-postgresql.py: Fix struct.pack() int argument
  tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy'
  perf flamegraph: Explicitly set utf-8 encoding
2020-07-07 15:38:53 -07:00
Paolo Bonzini
3c01655ac8 kselftest: ksft_test_num return type should be unsigned
Fixes a compiler warning:

In file included from sync_test.c:37:
../kselftest.h: In function ‘ksft_print_cnts’:
../kselftest.h:78:16: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Wsign-compare]
  if (ksft_plan != ksft_test_num())
                ^~

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-07-06 15:07:47 -06:00
David Ahern
34fe5a1cf9 ipv6: fib6_select_path can not use out path for nexthop objects
Brian reported a crash in IPv6 code when using rpfilter with a setup
running FRR and external nexthop objects. The root cause of the crash
is fib6_select_path setting fib6_nh in the result to NULL because of
an improper check for nexthop objects.

More specifically, rpfilter invokes ip6_route_lookup with flowi6_oif
set causing fib6_select_path to be called with have_oif_match set.
fib6_select_path has early check on have_oif_match and jumps to the
out label which presumes a builtin fib6_nh. This path is invalid for
nexthop objects; for external nexthops fib6_select_path needs to just
return if the fib6_nh has already been set in the result otherwise it
returns after the call to nexthop_path_fib6_result. Update the check
on have_oif_match to not bail on external nexthops.

Update selftests for this problem.

Fixes: f88d8ea67f ("ipv6: Plumb support for nexthop object in a fib6_info")
Reported-by: Brian Rak <brak@choopa.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06 13:24:16 -07:00
Pengfei Xu
0b78c9e8c1 selftests: tpm: upgrade TPM2 tests from Python 2 to Python 3
Python 2 is no longer supported by the Python upstream project, so
upgrade TPM2 tests to Python 3.

Fixed minor merge conflicts
Shuah Khan <skhan@linuxfoundation.org>

Signed-off-by: Pengfei Xu <pengfei.xu@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-07-06 14:20:35 -06:00
Arnaldo Carvalho de Melo
bee9ca1c8a perf report TUI: Remove needless 'dummy' event from menu
Fixing the common case of:

  perf record
  perf report

And getting just the cycles events.

We now have a 'dummy' event to get perf metadata events that take place
while we synthesize metadata records for pre-existing processes by
traversing procfs, so we always have this extra 'dummy' evsel, but we
don't have to offer it as there will be no samples on it, remove this
distraction.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20200706115452.GA2772@redhat.com/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-06 09:24:02 -03:00
Adrian Hunter
4c95ad261c perf intel-pt: Fix PEBS sample for XMM registers
The condition to add XMM registers was missing, the regs array needed to
be in the outer scope, and the size of the regs array was too small.

Fixes: 143d34a6b3 ("perf intel-pt: Add XMM registers to synthesized PEBS sample")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Luwei Kang <luwei.kang@intel.com>
Link: http://lore.kernel.org/lkml/20200630133935.11150-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-06 09:03:39 -03:00
Adrian Hunter
add07ccd92 perf intel-pt: Fix displaying PEBS-via-PT with registers
After recording PEBS-via-PT, perf script will not accept 'iregs' field e.g.

 # perf record -c 10000 -e '{intel_pt/branch=0/,branch-loads/aux-output/ppp}' -I -- ls -l
 ...
 [ perf record: Woken up 1 times to write data ]
 [ perf record: Captured and wrote 0.062 MB perf.data ]
 # ./perf script --itrace=eop -F+iregs
 Samples for 'dummy:u' event do not have IREGS attribute set. Cannot print 'iregs' field.

Fix by using allow_user_set, which is true when recording AUX area data.

Fixes: 9e64cefe43 ("perf intel-pt: Process options for PEBS event synthesis")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Luwei Kang <luwei.kang@intel.com>
Link: http://lore.kernel.org/lkml/20200630133935.11150-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-06 09:03:39 -03:00
Adrian Hunter
75bcb8776d perf intel-pt: Fix recording PEBS-via-PT with registers
When recording PEBS-via-PT, the kernel will not accept the intel_pt
event with register sampling e.g.

 # perf record --kcore -c 10000 -e '{intel_pt/branch=0/,branch-loads/aux-output/ppp}' -I -- ls -l
 Error:
 intel_pt/branch=0/: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat'

Fix by suppressing register sampling on the intel_pt evsel.

Committer notes:

Adrian informed that this is only available from Tremont onwards, so on
older processors the error continues the same as before.

Fixes: 9e64cefe43 ("perf intel-pt: Process options for PEBS event synthesis")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Luwei Kang <luwei.kang@intel.com>
Link: http://lore.kernel.org/lkml/20200630133935.11150-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-06 09:03:39 -03:00
Wei Li
d61cbb859b perf report TUI: Fix segmentation fault in perf_evsel__hists_browse()
The segmentation fault can be reproduced as following steps:

1) Executing perf report in tui.

2) Typing '/xxxxx' to filter the symbol to get nothing matched.

3) Pressing enter with no entry selected.

Then it will report a segmentation fault.

It is caused by the lack of check of browser->he_selection when
accessing it's member res_samples in perf_evsel__hists_browse().

These processes are meaningful for specified samples, so we can skip
these when nothing is selected.

Fixes: 4968ac8fb7 ("perf report: Implement browsing of individual samples")
Signed-off-by: Wei Li <liwei391@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: http://lore.kernel.org/lkml/20200612094322.39565-1-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-06 09:03:39 -03:00
Linus Torvalds
72674d4800 A series of fixes for x86:
- Reset MXCSR in kernel_fpu_begin() to prevent using a stale user space
    value.
 
  - Prevent writing MSR_TEST_CTRL on CPUs which are not explicitly
    whitelisted for split lock detection. Some CPUs which do not support
    it crash even when the MSR is written to 0 which is the default value.
 
  - Fix the XEN PV fallout of the entry code rework
 
  - Fix the 32bit fallout of the entry code rework
 
  - Add more selftests to ensure that these entry problems don't come back.
 
  - Disable 16 bit segments on XEN PV. It's not supported because XEN PV
    does not implement ESPFIX64
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl8B9JoTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoV8LEAC6QJPDvqYUl4r0rNIRG+S6D99lQOse
 1smxvgXX4UaRz5Tgz6kvYUcucqmmnTfvnO8cg82LASeFw1xfVPPAtl3GZjoClwhv
 0NJkKYcMm5QUOSVjJmjkcbAld//FyRfxHuJ8HMEtrbvkys2qWBmLzMaUNhFDNhcc
 73UMmyuyL4kef9v/iAeR5WXG5+b+j9lZDiC1lTWuEKs10d1EdTwt2O/wtSRRPpMn
 kL1qGTJAL+iRyRe7weLOkC2KZ9+Gq2NtyJQutkthZtGe5+pLT3AT6AlWxeg1HU8q
 pxaQP25oe8/8naIoOmwiuwAP2qmm5eHedzXoN0h7i2XmofYOJaWeF95K7oDro8Nj
 2deCx1bk0wr/RUxbYlfUacs8S+wmMWe7+BPnHXZphkSq5Vx+oXIw6mJOqmNb7Yiv
 7ld1QwSD5dyWCEk1af16XKsFvSIRiGh8FypfTiTxyk+z7HIWBNXlu8OWHn1A7Sra
 iaolCZfXtTJzm4w5+VVT2FX3s7jJrmMM4iSLtM2ISo2k+1HMlTbgLE6/yGjQ3ZaY
 U298W7Pm8CwBRgzyKBvZVfncm0U/B0FNo/8C0jsJKPIOdpoLhs+u7sjpyaNC+toz
 GE0skoWZxMhga4xPF84ua/l1VGncVUN1d5/dmnXz8xdyxFlktUtkt2iPE4G0rt3S
 Xgh2uLHOgST6Kw==
 =lI9c
 -----END PGP SIGNATURE-----

Merge tag 'x86-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "A series of fixes for x86:

   - Reset MXCSR in kernel_fpu_begin() to prevent using a stale user
     space value.

   - Prevent writing MSR_TEST_CTRL on CPUs which are not explicitly
     whitelisted for split lock detection. Some CPUs which do not
     support it crash even when the MSR is written to 0 which is the
     default value.

   - Fix the XEN PV fallout of the entry code rework

   - Fix the 32bit fallout of the entry code rework

   - Add more selftests to ensure that these entry problems don't come
     back.

   - Disable 16 bit segments on XEN PV. It's not supported because XEN
     PV does not implement ESPFIX64"

* tag 'x86-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ldt: Disable 16-bit segments on Xen PV
  x86/entry/32: Fix #MC and #DB wiring on x86_32
  x86/entry/xen: Route #DB correctly on Xen PV
  x86/entry, selftests: Further improve user entry sanity checks
  x86/entry/compat: Clear RAX high bits on Xen PV SYSENTER
  selftests/x86: Consolidate and fix get/set_eflags() helpers
  selftests/x86/syscall_nt: Clear weird flags after each test
  selftests/x86/syscall_nt: Add more flag combinations
  x86/entry/64/compat: Fix Xen PV SYSENTER frame setup
  x86/entry: Move SYSENTER's regs->sp and regs->flags fixups into C
  x86/entry: Assert that syscalls are on the right stack
  x86/split_lock: Don't write MSR_TEST_CTRL on CPUs that aren't whitelisted
  x86/fpu: Reset MXCSR to default in kernel_fpu_begin()
2020-07-05 12:23:49 -07:00
Andy Lutomirski
3c73b81a91 x86/entry, selftests: Further improve user entry sanity checks
Chasing down a Xen bug caused me to realize that the new entry sanity
checks are still fairly weak.  Add some more checks.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/881de09e786ab93ce56ee4a2437ba2c308afe7a9.1593795633.git.luto@kernel.org
2020-07-04 19:47:25 +02:00
Tom Zanussi
2160d6c8a1 tools lib traceevent: Add proper KBUFFER_TYPE_TIME_STAMP handling
Kernel commit dc4e2801d4 (ring-buffer: Redefine the unimplemented
RINGBUF_TYPE_TIME_STAMP) changed the way the ring buffer timestamps work
- after that commit the previously unimplemented RINGBUF_TYPE_TIME_STAMP
type causes the time delta to be used as a timestamp rather than a delta
to be added to the timestamp.

The trace-cmd code didn't get updated to handle this, so misinterprets
the event data for this case, which causes a cascade of errors,
including trace-report not being able to identify synthetic (or any
other) events generated by the histogram code (which uses TIME_STAMP
mode).  For example, the following triggers along with the trace-cmd
shown cause an UNKNOWN_EVENT error and trace-cmd report crash:

  # echo 'wakeup_latency  u64 lat pid_t pid char comm[16]' > /sys/kernel/debug/tracing/synthetic_events

  # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' > /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
  # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_wakeup).trace(wakeup_latency,$wakeup_lat,next_pid,next_comm) if next_comm=="ping"' > /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
  # echo 'hist:keys=comm,pid,lat:wakeup_lat=lat:sort=lat' > /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/trigger

  # trace-cmd record -e wakeup_latency -e sched_wakeup -f comm==\"ping\" ping localhost -c 5

  # trace-cmd report
  CPU 0 is empty
  CPU 1 is empty
  CPU 2 is empty
  CPU 3 is empty
  CPU 5 is empty
  CPU 6 is empty
  CPU 7 is empty
  cpus=8
    ug! no event found for type 0
  [UNKNOWN TYPE 0]
    ug! no event found for type 11520
  Segmentation fault (core dumped)

After this patch we get the correct interpretation and the events are
shown properly:

  # trace-cmd report
  CPU 0 is empty
  CPU 1 is empty
  CPU 2 is empty
  CPU 3 is empty
  CPU 5 is empty
  CPU 6 is empty
  CPU 7 is empty
  cpus=8
          <idle>-0     [004] 23284.341392: sched_wakeup:         ping:12031 [120] success=1 CPU:004
          <idle>-0     [004] 23284.341464: wakeup_latency:       lat=58, pid=12031, comm=ping
          <idle>-0     [004] 23285.365303: sched_wakeup:         ping:12031 [120] success=1 CPU:004
          <idle>-0     [004] 23285.365382: wakeup_latency:       lat=64, pid=12031, comm=ping
          <idle>-0     [004] 23286.389290: sched_wakeup:         ping:12031 [120] success=1 CPU:004
          <idle>-0     [004] 23286.389378: wakeup_latency:       lat=72, pid=12031, comm=ping
          <idle>-0     [004] 23287.413213: sched_wakeup:         ping:12031 [120] success=1 CPU:004
          <idle>-0     [004] 23287.413291: wakeup_latency:       lat=64, pid=12031, comm=ping

Link: http://lkml.kernel.org/r/1567628224.13841.4.camel@kernel.org
Link: http://lore.kernel.org/linux-trace-devel/20200625100516.365338-3-tz.stoyanov@gmail.com

Signed-off-by: Tom Zanussi <zanussi@kernel.org>
[ Ported from trace-cmd.git ]
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200702185703.785094515@goodmis.org
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03 08:45:38 -03:00