Commit Graph

796614 Commits

Author SHA1 Message Date
Linus Torvalds
3dca04d694 RISC-V Patches for the 4.20 Merge Window, Part 2 v2
This tag contains the follow-on patches I'd like to target for the 4.20
 merge window.  I'm being somewhat conservative here, as while there are
 a few patches on the mailing list that were posted early in the merge
 window I'd like to let those bake for another round -- this was a fairly
 big release as far as RISC-V is concerened, and we need to walk before
 we can run.
 
 As far as the patches that made it go:
 
 * A patch to ignore offline CPUs when calculating AT_HWCAP.  This should
   fix GDB on the HiFive unleashed, which has an embedded core for hart
   0 which is exposed to Linux as an offline CPU.
 * A move of EM_RISCV to elf-em.h, which is where it should have been to
   begin with.
 * I've also removed the 64-bit divide routines.  I know I'm not really
   playing by my own rules here because I posted the patches this
   morning, but since they shouldn't be in the kernel I think it's better
   to err on the side of going too fast here.
 
 I don't anticipate any more patch sets for the merge window.
 
 Changes since v1:
 
 * Use a consistent base to merge from so the history isn't a mess.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAlvZ//ITHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRDvTKFQLMurQaOqEACpJTs19+1HFQ/YSB4P+drIImDq9XNF
 OFElcqe+R961BnyHJUA4WObl0Bl9bDqciYhelwdeb/0gYaOBG5IsmwAKxN9N2f9d
 m2/3eVUyiwMDKsc8Mrdcu7e3TLvfnhfaSOVe9hDvVcSeZvaC4S+dr+b7gjOZd45o
 52SQqj6TMh20g5h6knaU5wnhHriJH7U4MwiEmwSTZuUkKj8Uoa1HGyzuVqqhi6A2
 3y0m4VmVTwS9dmork2xZdsif+POSxrRxdtMTMWf85FelSO1OdTeMemUx2WnnWlCU
 5VoPF5upXWB6uVtgXAVC8yhjCke5mUIOMcO10UGXdcjS/q9Vfg0yt6LusijTmYec
 UznnpnkPOap3t6tb+dkRanP+BRphB6A9DpXUkiGGo2nwbi48OC+pTYjZMdRUX7r3
 FHq3LknprDfK6+D6goftlXlYSmb8H2rSCubK5dv6Zq9/rkBAkN/ESo9HEXvtPrAh
 oQAU1kmjq1EQg87fpmMvVySLApj+YPCoNMaPn3be03JRup4vaoGo8obmVP7rqgAG
 BIq6gx2BqqWWNvJftFm85AurTC1K3ClLO0mgTD5zhHvaCTHNI0TLlYh58QcKU00j
 c6+u+6tMF00Nvk8n/cbC/hRc2T+oAGb6hr6pFQEhANAkMu9dYpYfOWRbYl7Iiszq
 J3eT+7rxvHXCpg==
 =9Lsg
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-4.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull more RISC-V updates from Palmer Dabbelt:
 "This contains the follow-on patches I'd like to target for the 4.20
  merge window. I'm being somewhat conservative here, as while there are
  a few patches on the mailing list that were posted early in the merge
  window I'd like to let those bake for another round -- this was a
  fairly big release as far as RISC-V is concerened, and we need to walk
  before we can run.

  As far as the patches that made it go:

   - A patch to ignore offline CPUs when calculating AT_HWCAP. This
     should fix GDB on the HiFive unleashed, which has an embedded core
     for hart 0 which is exposed to Linux as an offline CPU.

   - A move of EM_RISCV to elf-em.h, which is where it should have been
     to begin with.

   - I've also removed the 64-bit divide routines. I know I'm not really
     playing by my own rules here because I posted the patches this
     morning, but since they shouldn't be in the kernel I think it's
     better to err on the side of going too fast here.

  I don't anticipate any more patch sets for the merge window"

* tag 'riscv-for-linus-4.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  Move EM_RISCV into elf-em.h
  RISC-V: properly determine hardware caps
  Revert "lib: Add umoddi3 and udivmoddi4 of GCC library routines"
  Revert "RISC-V: Select GENERIC_LIB_UMODDI3 on RV32"
2018-10-31 16:20:28 -07:00
Naveen N. Rao
1936f094e1 selftests/powerpc: Fix compilation issue due to asm label
We are using 'dscr_insn' as a label in inline asm to identify if a
SIGILL was generated by the mtspr instruction at that point. However,
with inline assembly, the compiler is still free to duplicate the asm
statement for optimization purposes, which results in the label being
defined twice with the error:
	/tmp/ccerQCql.s:874: Error: symbol `dscr_insn' is already defined

With different compiler versions, we may also see:
	/tmp/ccJzLDlN.o:(.toc+0x0): undefined reference to `dscr_insn'

Remove the use of the label in the inline assembly. Instead, just look
for the offending instruction in the signal handler.

Fixes: d2bf793237 ("selftests/powerpc: Add test to verify rfi flush across a system call")
Reported-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-01 10:06:03 +11:00
Linus Torvalds
9bb9d4fdce Merge branch 'for-linus-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:

 - removal of old and dead code

 - a bug fix for our tty driver

 - other minor cleanups across the code base

* 'for-linus-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Make line/tty semantics use true write IRQ
  um: trap: fix spelling mistake, EACCESS -> EACCES
  um: Don't hardcode path as it is architecture dependent
  um: NULL check before kfree is not needed
  um: remove unused AIO code
  um: Give start_idle_thread() a return code
  um: Remove update_debugregs()
  um: Drop own definition of PTRACE_SYSEMU/_SINGLESTEP
2018-10-31 15:46:16 -07:00
Linus Torvalds
adb6b2b2b5 c6x changes for 4.20
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJb2glLAAoJEOiN4VijXeFPjfUQAJcSJ/NeoGGpj9T8/+InkEZ9
 dFkB91lyylooew15b9s7Jvrm1kLDzQ6wZif3BzLuBqE4mkh58MawAuOVCYolzTlN
 dkaA5Jqz/CA0ycvQAnfKQKdzJlBDhRanUg1MmB2O018q4afGJKbMlhRicqKtVdv1
 T5GVzwFLkklaAbmPgWOsTujvyK1aAlXUljwO31oKaFZT5Cjl2eM51NfmMiXzQ63o
 lqutmpMspCd9V+jac0aLlYonjFKVIoMHI687RUReIWlbsIySA2GMG/W7xLmnIxJe
 Ny2labiL/epmBlK3IgM0q/eW7RrZN5gX5o6TVpsVL2PJePEOQkMMVz6MAZAt4u9k
 MVcdeuWCqOawMtoyKLUsC/N5ve/rRMildf/XUOL5uu171IEjp3WWCrHR1n1j5aH4
 ouPiXjedB+k9muzi5lQGNERthvPqTshnPohu5xyZt2FcvcA15gbNBFKbzYTlaMVI
 YJANFfLBVaH2QnY1ZSXgp5k1zzlpueil7WB0sqQlbcr372KPJKyscGjXV+4Qa6iJ
 uUjXY8XTuNHeFC5/RKwY3CFWfbE4ebxtvRaUgniVvxYk/OiTjswRhTletMPXxG8+
 QE4+ZNKC8NQfaaxba3yYTPd5Nk7+1WypZC3lbuJcObBQFrDFWpRF58ZGrB53+ssG
 3mB+TupWvjV2KjasXozC
 =8GvY
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming

Pull c6x update from Mark Salter.

* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
  c6x: switch to NO_BOOTMEM
2018-10-31 15:39:25 -07:00
Andrey Ignatov
3615353218 libbpf: Fix compile error in libbpf_attach_type_by_name
Arnaldo Carvalho de Melo reported build error in libbpf when clang
version 3.8.1-24 (tags/RELEASE_381/final) is used:

libbpf.c:2201:36: error: comparison of constant -22 with expression of
type 'const enum bpf_attach_type' is always false
[-Werror,-Wtautological-constant-out-of-range-compare]
                if (section_names[i].attach_type == -EINVAL)
                    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^  ~~~~~~~
1 error generated.

Fix the error by keeping "is_attachable" property of a program in a
separate struct field instead of trying to use attach_type itself.

Fixes: 956b620fcf ("libbpf: Introduce libbpf_attach_type_by_name")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-31 23:06:17 +01:00
Li Zhijian
deee2cae27 kselftests/bpf: use ping6 as the default ipv6 ping binary if it exists
ping binary on some distros doesn't support "ping -6" anymore.

Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-31 23:05:30 +01:00
Ingo Molnar
29995d296e perf/urgent improvements and fixes:
- Fixes dealing with the removal of the fallback to looking up samples
   marked as userspace in the kernel maps, done recently:
 
   - For intel-pt, that was setting the synthesized header misc field
     as PERF_RECORD_MISC_USER, depending thus on the fallback to take
     place, now it sets as USER or KERNEL according to x86 specific
     knowledge. Also now it inserts the PERF_CONTEXT_{USER,KERNEL} into
     the PERF_SAMPLE_CALLCHAINs it synthesizes from hw traces (Adrian Hunter)
 
   - Similar fixes for the cs-etm ARM HW trace code, that used the Intel PT
     model as a starting point (Leo Yan)
 
   - For the "caller" callchain order, where the callchain returned by the
     kernel was simply reversed without taking into account the
     PERF_CONTEXT_{USER,KERNEL,etc} markers from where to define if an entry
     was for kernel or userspace, working just because the map lookup fallback
     was in place (David S. Miller)
 
 - Allow for selecting if 'overwrite' mode should be used in 'perf top' and
   make the default for it not to be used. This is due to problems with the
   current implementation where the pausing used ends up making 'perf top'
   miss PERF_RECORD_{MMAP,FORK,EXEC,etc} events, which with short lifetime
   threads workloads leads quickly to many "unknown" maps (and thus symbols)
   to appear in the UI. Workloads with long thread lifetimes and with few
   metadata events can still use --overwrite to take advantage of the
   overwrite mode (Arnaldo Carvalho de Melo)
 
 - Start 'perf top''s display thread earlier, so that the screen doesn't
   remain blank for too long at tool start (David S. Miller)
 
 - Don't clone maps from parent when synthesizing forks, to avoid the inevitable
   flurry of overlapping maps as we process the synthesized MMAP2 events that get
   delivered shortly thereafter. (David S. Miller)
 
 - Take pgoff into account when reporting elf to libdwfl, now the unwinding
   results are the same with elfutils's libdwfl and libunwind (Milian Wolff)
 
 - Update lotsa kernel ABI headers (Arnaldo Carvalho de Melo)
 
 - 'perf trace' syscall arg beautification improvements to allow for
   handling args such as mount's 'flags', where maks have to be ignored
   before considering what is left, that, if only zeroes, is suppressed
   like other args without such masks (Arnaldo Carvalho de Melo)
 
 - Beautify mount's 'source' and 'flags' args (Arnaldo Carvalho de Melo)
 
 - Generate mmap's flags bit constants from linux/mman.h and all the
   arch specific mman.h files, so that no changes in the main 'perf trace'
   source files is required when new flags get added (Arnaldo Carvalho de Melo)
 
 - Consider syscall aliases, so that 'perf trace -e umount' works and we don't
   have to use 'umount2' (that works as well, just not required) (Arnaldo Carvalho de Melo)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCW9nYxQAKCRCyPKLppCJ+
 J+L1AQCYddnP+10DKmX1AANnFZrnhwpNuXSXmsa1Ar1npLdDLQD9H/v8EOdqQ4f8
 ckoYhlgw7+R/QANS5C4J2aalCbvQ2Qc=
 =uYi2
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-for-mingo-4.20-20181031' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent improvements and fixes from Arnaldo Carvalho de Melo:

- Fixes dealing with the removal of the fallback to looking up samples
  marked as userspace in the kernel maps, done recently:

  - For intel-pt, that was setting the synthesized header misc field
    as PERF_RECORD_MISC_USER, depending thus on the fallback to take
    place, now it sets as USER or KERNEL according to x86 specific
    knowledge. Also now it inserts the PERF_CONTEXT_{USER,KERNEL} into
    the PERF_SAMPLE_CALLCHAINs it synthesizes from hw traces (Adrian Hunter)

  - Similar fixes for the cs-etm ARM HW trace code, that used the Intel PT
    model as a starting point (Leo Yan)

  - For the "caller" callchain order, where the callchain returned by the
    kernel was simply reversed without taking into account the
    PERF_CONTEXT_{USER,KERNEL,etc} markers from where to define if an entry
    was for kernel or userspace, working just because the map lookup fallback
    was in place (David S. Miller)

- Allow for selecting if 'overwrite' mode should be used in 'perf top' and
  make the default for it not to be used. This is due to problems with the
  current implementation where the pausing used ends up making 'perf top'
  miss PERF_RECORD_{MMAP,FORK,EXEC,etc} events, which with short lifetime
  threads workloads leads quickly to many "unknown" maps (and thus symbols)
  to appear in the UI. Workloads with long thread lifetimes and with few
  metadata events can still use --overwrite to take advantage of the
  overwrite mode (Arnaldo Carvalho de Melo)

- Start 'perf top''s display thread earlier, so that the screen doesn't
  remain blank for too long at tool start (David S. Miller)

- Don't clone maps from parent when synthesizing forks, to avoid the inevitable
  flurry of overlapping maps as we process the synthesized MMAP2 events that get
  delivered shortly thereafter. (David S. Miller)

- Take pgoff into account when reporting elf to libdwfl, now the unwinding
  results are the same with elfutils's libdwfl and libunwind (Milian Wolff)

- Update lotsa kernel ABI headers (Arnaldo Carvalho de Melo)

- 'perf trace' syscall arg beautification improvements to allow for
  handling args such as mount's 'flags', where maks have to be ignored
  before considering what is left, that, if only zeroes, is suppressed
  like other args without such masks (Arnaldo Carvalho de Melo)

- Beautify mount's 'source' and 'flags' args (Arnaldo Carvalho de Melo)

- Generate mmap's flags bit constants from linux/mman.h and all the
  arch specific mman.h files, so that no changes in the main 'perf trace'
  source files is required when new flags get added (Arnaldo Carvalho de Melo)

- Consider syscall aliases, so that 'perf trace -e umount' works and we don't
  have to use 'umount2' (that works as well, just not required) (Arnaldo Carvalho de Melo)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-31 22:53:40 +01:00
Linus Torvalds
9b5cf826ef fuse update for 4.20
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCW9m8rQAKCRDh3BK/laaZ
 POTeAP9DthScqnVxrRiyvORwffjTLOCijY4yAatgxTU5MO6TQgD/eeO62Exq5Cij
 4uXCSNIzPVPKiimunVKYoDM8KmcNtAQ=
 =z92F
 -----END PGP SIGNATURE-----

Merge tag 'fuse-update-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse

Pull fuse updates from Miklos Szeredi:
 "As well as the usual bug fixes, this adds the following new features:

   - cached readdir and readlink

   - max I/O size increased from 128k to 1M

   - improved performance and scalability of request queues

   - copy_file_range support

  The only non-fuse bits are trivial cleanups of macros in
  <linux/bitops.h>"

* tag 'fuse-update-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (31 commits)
  fuse: enable caching of symlinks
  fuse: only invalidate atime in direct read
  fuse: don't need GETATTR after every READ
  fuse: allow fine grained attr cache invaldation
  bitops: protect variables in bit_clear_unless() macro
  bitops: protect variables in set_mask_bits() macro
  fuse: realloc page array
  fuse: add max_pages to init_out
  fuse: allocate page array more efficiently
  fuse: reduce size of struct fuse_inode
  fuse: use iversion for readdir cache verification
  fuse: use mtime for readdir cache verification
  fuse: add readdir cache version
  fuse: allow using readdir cache
  fuse: allow caching readdir
  fuse: extract fuse_emit() helper
  fuse: add FOPEN_CACHE_DIR
  fuse: split out readdir.c
  fuse: Use hash table to link processing request
  fuse: kill req->intr_unique
  ...
2018-10-31 14:50:02 -07:00
Linus Torvalds
31990f0f53 The highlights are:
- a series that fixes some old memory allocation issues in libceph
   (myself).  We no longer allocate memory in places where allocation
   failures cannot be handled and BUG when the allocation fails.
 
 - support for copy_file_range() syscall (Luis Henriques).  If size and
   alignment conditions are met, it leverages RADOS copy-from operation.
   Otherwise, a local copy is performed.
 
 - a patch that reduces memory requirement of ceph_sync_read() from the
   size of the entire read to the size of one object (Zheng Yan).
 
 - fallocate() syscall is now restricted to FALLOC_FL_PUNCH_HOLE (Luis
   Henriques)
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlvZ6AcTHGlkcnlvbW92
 QGdtYWlsLmNvbQAKCRBKf944AhHzi8H+B/9V/QB1BX5Q2DvkS3mcLNI2NphrppaD
 VBuviwoIzaBm1paCrx40J/pCtsK1Fybl5dBAh1W0SDxEGR8JUA8GJw+oemtOS6pZ
 DwjOF9S7uhzf5M3nQ9SvAbIudBISMZQRi22Y8fWs3k+yaECIz1J/pe7RiKo/GBAB
 NnlbrZ1AYSB02chchVCSmWTApeIRp9JXnaM9xLMJWGVLL/vONjt3ltJ/w9haGYz8
 FPFLPFeWobWqFElnOUomxU8Cv84DgPtH8si0UAn16jveractpFJWO4X6LDs/ZYDk
 /MccfsB3EK9BCJdLJMoI0/lXxE33z3/MehmJDs9xGSX/N4N7UTF8Ve1b
 =U91e
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-4.20-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "The highlights are:

   - a series that fixes some old memory allocation issues in libceph
     (myself). We no longer allocate memory in places where allocation
     failures cannot be handled and BUG when the allocation fails.

   - support for copy_file_range() syscall (Luis Henriques). If size and
     alignment conditions are met, it leverages RADOS copy-from
     operation. Otherwise, a local copy is performed.

   - a patch that reduces memory requirement of ceph_sync_read() from
     the size of the entire read to the size of one object (Zheng Yan).

   - fallocate() syscall is now restricted to FALLOC_FL_PUNCH_HOLE (Luis
     Henriques)"

* tag 'ceph-for-4.20-rc1' of git://github.com/ceph/ceph-client: (25 commits)
  ceph: new mount option to disable usage of copy-from op
  ceph: support copy_file_range file operation
  libceph: support the RADOS copy-from operation
  ceph: add non-blocking parameter to ceph_try_get_caps()
  libceph: check reply num_data_items in setup_request_data()
  libceph: preallocate message data items
  libceph, rbd, ceph: move ceph_osdc_alloc_messages() calls
  libceph: introduce alloc_watch_request()
  libceph: assign cookies in linger_submit()
  libceph: enable fallback to ceph_msg_new() in ceph_msgpool_get()
  ceph: num_ops is off by one in ceph_aio_retry_work()
  libceph: no need to call osd_req_opcode_valid() in osd_req_encode_op()
  ceph: set timeout conditionally in __cap_delay_requeue
  libceph: don't consume a ref on pagelist in ceph_msg_data_add_pagelist()
  libceph: introduce ceph_pagelist_alloc()
  libceph: osd_req_op_cls_init() doesn't need to take opcode
  libceph: bump CEPH_MSG_MAX_DATA_LEN
  ceph: only allow punch hole mode in fallocate
  ceph: refactor ceph_sync_read()
  ceph: check if LOOKUPNAME request was aborted when filling trace
  ...
2018-10-31 14:42:31 -07:00
Gustavo A. R. Silva
1b7619828d NTB: ntb_hw_idt: replace IS_ERR_OR_NULL with regular NULL checks
Both devm_kcalloc() and devm_kzalloc() return NULL on error. They
never return error pointers.

The use of IS_ERR_OR_NULL is currently applied to the wrong
context.

Fix this by replacing IS_ERR_OR_NULL with regular NULL checks.

Fixes: bf2a952d31 ("NTB: Add IDT 89HPESxNTx PCIe-switches support")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-10-31 16:22:44 -04:00
Dave Jiang
7756e2b5d6 ntb: intel: fix return value for ndev_vec_mask()
ndev_vec_mask() should be returning u64 mask value instead of int.
Otherwise the mask value returned can be incorrect for larger
vectors.

Fixes: e26a5843f7 ("NTB: Split ntb_hw_intel and ntb_transport drivers")

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Lucas Van <lucas.van@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-10-31 16:07:26 -04:00
Jon Mason
a861594b1b ntb_netdev: fix sleep time mismatch
The tx_time should be in usecs (according to the comment above the
variable), but the setting of the timer during the rearming is done in
msecs.  Change it to match the expected units.

Fixes: e74bfeedad ("NTB: Add flow control to the ntb_netdev")
Suggested-by: Gerd W. Haeussler <gerd.haeussler@cesys-it.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Acked-by: Dave Jiang <dave.jiang@intel.com>
2018-10-31 16:02:39 -04:00
David S. Miller
e2acdddde0 Merge branch 'mlxsw-Enable-minimum-shaper-on-MC-TCs'
Ido Schimmel says:

====================
mlxsw: Enable minimum shaper on MC TCs

Petr says:

An MC-aware mode was introduced in commit 7b81953066 ("mlxsw:
spectrum: Configure MC-aware mode on mlxsw ports"). In MC-aware mode,
BUM traffic gets a special treatment by being assigned to a separate set
of traffic classes 8..15. Pairs of TCs 0 and 8, 1 and 9, etc., are then
configured to strictly prioritize the lower-numbered ones. The intention
is to prevent BUM traffic from flooding the switch and push out all UC
traffic, which would otherwise happen, and instead give UC traffic
precedence.

However strictly prioritizing UC traffic has the effect that UC overload
pushes out all BUM traffic, such as legitimate ARP queries. These
packets are kept in queues for a while, but under sustained UC overload,
their lifetime eventually expires and these packets are dropped. That is
detrimental to network performance as well.

In this patchset, MC TCs (8..15) are configured with minimum shaper of
200Mbps (a minimum permitted value) to allow a trickle of necessary
control traffic to get through.

First in patch #1, the QEEC register is extended with fields necessary
to configure the minimum shaper.

In patch #2, minimum shaper is enabled on TCs 8..15.

In patches #3 and #4, first the MC-awareness test is tweaked to support
the minimum shaper, and then a new test is introduced to test that MC
traffic behaves well under UC overload.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:56:59 -07:00
Petr Machata
a5ee171d08 selftests: mlxsw: qos_mc_aware: Add a test for UC awareness
In a previous patch, mlxsw was updated to configure a minimum bandwidth
allowance on MC TCs. Test that this indeed fixes the problem of UC
traffic overload pushing out all MC traffic.

Fixes: b5638d46c9 ("selftests: mlxsw: Add a test for UC behavior under MC flood")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:56:59 -07:00
Petr Machata
8f3f09358c selftests: mlxsw: qos_mc_aware: Tweak for min shaper
Since the minimum shaper is now being enabled for MC TCs, it's
unreasonable to expect no UC traffic loss. Minimal min shaper value is
200Mbps, which is 20% of the 1Gbps that this test configures on egress.
To cover for glitches, tolerate up to 25% UC degradation under MC
overload.

Fixes: b5638d46c9 ("selftests: mlxsw: Add a test for UC behavior under MC flood")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:56:59 -07:00
Petr Machata
0fe6402316 mlxsw: spectrum: Set minimum shaper on MC TCs
An MC-aware mode was introduced in commit 7b81953066 ("mlxsw:
spectrum: Configure MC-aware mode on mlxsw ports"). In MC-aware mode,
BUM traffic gets a special treatment by being assigned to a separate set
of traffic classes 8..15. Pairs of TCs 0 and 8, 1 and 9, etc., are then
configured to strictly prioritize the lower-numbered ones. The intention
is to prevent BUM traffic from flooding the switch and push out all UC
traffic, which would otherwise happen, and instead give UC traffic
precedence.

However strictly prioritizing UC traffic has the effect that UC overload
pushes out all BUM traffic, such as legitimate ARP queries. These
packets are kept in queues for a while, but under sustained UC overload,
their lifetime eventually expires and these packets are dropped. That is
detrimental to network performance as well.

Therefore configure the MC TCs (8..15) with minimum shaper of 200Mbps (a
minimum permitted value) to allow a trickle of necessary control traffic
to get through.

Fixes: 7b81953066 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:56:58 -07:00
Petr Machata
8b931821aa mlxsw: reg: QEEC: Add minimum shaper fields
Add QEEC.mise (minimum shaper enable) and QEEC.min_shaper_rate to enable
configuration of minimum shaper.

Increase the QEEC length to 0x20 as well: that's the length that the
register has had for a long time now, but with the configurations that
mlxsw typically exercises, the firmware tolerated 0x1C-sized packets.
With mise=true however, FW rejects packets unless they have the full
required length.

Fixes: b9b7cee405 ("mlxsw: reg: Add QoS ETS Element Configuration register")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:56:58 -07:00
David S. Miller
c4d63c7147 Merge branch 'hns3-fixes'
Huazhong Tan says:

====================
Bugfix for the HNS3 driver

This patch series include bugfix for the HNS3 ethernet
controller driver.

Change log:
V4->V5:
	Fixes comments from Joe Perches & Sergei Shtylyov
V3->V4:
	Fixes comments from Sergei Shtylyov
V2->V3:
	Fixes comments from Sergei Shtylyov
V1->V2:
	Fixes the compilation break reported by kbuild test robot
	http://patchwork.ozlabs.org/patch/989818/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:39 -07:00
Huazhong Tan
29118ab962 net: hns3: bugfix for rtnl_lock's range in the hclgevf_reset()
Since hclgevf_reset_wait() is used to wait for the hardware to complete
the reset, it is not necessary to hold the rtnl_lock during
hclgevf_reset_wait(). So this patch releases the lock for the duration
of hclgevf_reset_wait().

Fixes: 6988eb2a9b ("net: hns3: Add support to reset the enet/ring mgmt layer")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:38 -07:00
Huazhong Tan
a963052e53 net: hns3: bugfix for rtnl_lock's range in the hclge_reset()
Since hclge_reset_wait() is used to wait for the hardware to complete
the reset, it is not necessary to hold the rtnl_lock during
hclge_reset_wait(). So this patch releases the lock for the duration
of hclge_reset_wait().

Fixes: 6d4fab3953 ("net: hns3: Reset net device with rtnl_lock")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:38 -07:00
Huazhong Tan
3c88ed1d79 net: hns3: bugfix for handling mailbox while the command queue reinitialized
In a multi-core machine, the mailbox service and reset service
will be executed at the same time. The reset service will re-initialize
the command queue, before that, the mailbox handler can only get some
invalid messages.

The HCLGE_STATE_CMD_DISABLE flag means that the command queue is not
available and needs to be reinitialized. Therefore, when the mailbox
handler recognizes this flag, it should not process the command.

Fixes: dde1a86e93 ("net: hns3: Add mailbox support to PF driver")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:38 -07:00
Huazhong Tan
7fa6be4fd2 net: hns3: fix incorrect return value/type of some functions
There are some functions that, when they fail to send the command,
need to return the corresponding error value to its caller.

Fixes: 46a3df9f97 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Fixes: 681ec3999b ("net: hns3: fix for vlan table lost problem when resetting")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:38 -07:00
Huazhong Tan
1c12493809 net: hns3: bugfix for hclge_mdio_write and hclge_mdio_read
When there is a PHY, the driver needs to complete some operations through
MDIO during reset reinitialization, so HCLGE_STATE_CMD_DISABLE is more
suitable than HCLGE_STATE_RST_HANDLING to prevent the MDIO operation from
being sent during the hardware reset.

Fixes: b50ae26c57 ("net: hns3: never send command queue message to IMP when reset)
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:38 -07:00
Huazhong Tan
6d71ec6cbf net: hns3: bugfix for is_valid_csq_clean_head()
The HEAD pointer of the hardware command queue maybe equal to the command
queue's next_to_use in the driver, so that does not belong to the invalid
HEAD pointer, since the hardware may not process the command in time,
causing the HEAD pointer to be too late to update. The variables' name
in this function is unreadable, so give them a more readable one.

Fixes: 3ff504908f ("net: hns3: fix a dead loop in hclge_cmd_csq_clean")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:38 -07:00
Huazhong Tan
5faaf0752a net: hns3: remove unnecessary queue reset in the hns3_uninit_all_ring()
It is not necessary to reset the queue in the hns3_uninit_all_ring(),
since the queue is stopped in the down operation, and will be reset
in the up operation. And the judgment of the HCLGE_STATE_RST_HANDLING
flag in the hclge_reset_tqp() is not correct, because we need to reset
tqp during pf reset, otherwise it may cause queue not being reset to
working state problem.

Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:38 -07:00
Huazhong Tan
b2f74dbaf1 net: hns3: bugfix for the initialization of command queue's spin lock
The spin lock of the command queue only need to be initialized once
when the driver initializes the command queue. It is not necessary to
initialize the spin lock when resetting. At the same time, the
modification of the queue member should be performed after acquiring
the lock.

Fixes: 3efb960f05 ("net: hns3: Refactor the initialization of command queue")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:38 -07:00
Huazhong Tan
0d4411408a net: hns3: bugfix for reporting unknown vector0 interrupt repeatly problem
The current driver supports handling two vector0 interrupts, reset and
mailbox. When the hardware reports an interrupt of another type of
interrupt source, if the driver does not process the interrupt, but
enables the interrupt, the hardware will repeatedly report the unknown
interrupt.

Therefore, the driver enables the vector0 interrupt after clearing the
known type of interrupt source. Other conditions are not enabled.

Fixes: cd8c5c269b ("net: hns3: Fix for hclge_reset running repeatly problem")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:38 -07:00
Huazhong Tan
73b907a083 net: hns3: bugfix for buffer not free problem during resetting
When hns3_get_ring_config()/hns3_queue_to_ring()/
hns3_get_vector_ring_chain() failed during resetting, the allocated
memory has not been freed before these three functions return. So
this patch adds error handler in these functions to fix it.

Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:38 -07:00
Huazhong Tan
ece4bf46e9 net: hns3: add error handler for hns3_nic_init_vector_data()
When hns3_nic_init_vector_data() fails to map ring to vector,
it should cancel the netif_napi_add() that has been successfully
done and then exits.

Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:42:38 -07:00
Eric Dumazet
d48051c5b8 net/mlx5e: fix csum adjustments caused by RXFCS
As shown by Dmitris, we need to use csum_block_add() instead of csum_add()
when adding the FCS contribution to skb csum.

Before 4.18 (more exactly commit 88078d98d1 "net: pskb_trim_rcsum()
and CHECKSUM_COMPLETE are friends"), the whole skb csum was thrown away,
so RXFCS changes were ignored.

Then before commit d55bef5059 ("net: fix pskb_trim_rcsum_slow() with
odd trim offset") both mlx5 and pskb_trim_rcsum_slow() bugs were canceling
each other.

Now we fixed pskb_trim_rcsum_slow() we need to fix mlx5.

Note that this patch also rewrites mlx5e_get_fcs() to :

- Use skb_header_pointer() instead of reinventing it.
- Use __get_unaligned_cpu32() to avoid possible non aligned accesses
  as Dmitris pointed out.

Fixes: 902a545904 ("net/mlx5e: When RXFCS is set, add FCS data into checksum calculation")
Reported-by: Paweł Staszewski <pstaszewski@itcare.pl>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Eran Ben Elisha <eranbe@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Dimitris Michailidis <dmichail@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Paweł Staszewski <pstaszewski@itcare.pl>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Tested-By: Maria Pasechnik <mariap@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:40:52 -07:00
Jason Wang
ff002269a4 vhost: Fix Spectre V1 vulnerability
The idx in vhost_vring_ioctl() was controlled by userspace, hence a
potential exploitation of the Spectre variant 1 vulnerability.

Fixing this by sanitizing idx before using it to index d->vqs.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:39:15 -07:00
Bo YU
b1c234441e net: drop a space before tabs
Fix a warning from checkpatch.pl:'please no space before tabs'
in include/net/af_unix.h

Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:37:12 -07:00
Bo YU
c4147beabe net: add an identifier name for 'struct sock *'
Fix a warning from checkpatch:
function definition argument 'struct sock *' should also have an
identifier name in include/net/af_unix.h.

Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:37:12 -07:00
Colin Ian King
e7611088f0 net: hns3: fix spelling mistake "intrerrupt" -> "interrupt"
Trivial fix to spelling mistake in dev_err message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31 12:33:10 -07:00
Palmer Dabbelt
ef70696a63
lib: Remove umoddi3 and udivmoddi4
These were only necessary for an out-of-tree driver that has since been
fixed to use the proper divide routines.  I've simply reverted the pair
of commits we made last week.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-31 12:13:54 -07:00
Palmer Dabbelt
9b4789eacb
Move EM_RISCV into elf-em.h
This should never have been inside our arch port to begin with, it's
just a relic from when we were maintaining out of tree patches.

Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-31 12:13:47 -07:00
Andreas Schwab
732e8e4130
RISC-V: properly determine hardware caps
On the Hifive-U platform, cpu 0 is a masked cpu with less capabilities
than the other cpus.  Ignore it for the purpose of determining the
hardware capabilities of the system.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-31 12:13:43 -07:00
Palmer Dabbelt
0ef08ca36a
Revert "lib: Add umoddi3 and udivmoddi4 of GCC library routines"
We don't want 64-bit divide in the kernel.

This reverts commit 6315730e9e.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-31 12:12:59 -07:00
Palmer Dabbelt
3b306f6f3a
Revert "RISC-V: Select GENERIC_LIB_UMODDI3 on RV32"
I'm removing the generic 64-bit divide support, which means this will no
longer work.

This reverts commit 757331db92.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-31 12:12:33 -07:00
Linus Torvalds
a9ac6cc47b fbdev changes for v4.20:
- update atyfb driver - improvements for ATI Mach64 chips: detect
   the dot clock divider correctly on Sparc, fix display corruptions
   (due to endianness issues and improper reading of accelerator
   registers), optimize scrolling performance and also fix debugging
   printks (Mikulas Patocka)
 
 - rewrite USB unplug handling in udlfb driver using framebuffer
   subsystem reference counting (Mikulas Patocka)
 
 - fix support for native-mode display-timings in atmel_lcdfb driver
   (Sam Ravnborg)
 
 - fix information leak & add missing access_ok() checks in sbuslib
   (Dan Carpenter)
 
 - allow using GPIO expanders that can sleep in ssd1307fb driver
   (Michal Vokáč)
 
 - convert omapfb driver to use GPIO descriptors instead of GPIO
   numbers for Amstrad Delta board (Janusz Krzysztofik)
 
 - fix broken Kconfig menu dependencies (Randy Dunlap)
 
 - convert fbdev subsystem to use %pOFn instead of device_node.name
   (Rob Herring)
 
 - remove the dead old CLPS711x LCD support driver (the new CLPS711x
   LCD support driver is still available)
 
 - misc fixes (Jia-Ju Bai, Gustavo A. R. Silva)
 
 - misc cleanups (Mehdi Bounya, Nathan Chancellor, YueHaibing)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJb2brsAAoJEH4ztj+gR8ILErEP/0Ae7KqsFLXg/6w/d4zrStVD
 jvE31VyjH0L1qLZJtCH+Mw6FFW7QmbA3ZiIhV5vr+pp/nJqKEBSi0PGPDb/Qq3//
 6YHyOBChIApuvs688RcoghGHySjV5vbJZpRhIYqF7Ti7dvnJNfyptWQy6RV3EpBO
 EnilDtQmHG1uaZgsBPJg9fCSqPioU+JRsdobf9fG5mkKxjZVM5OWPLv81UWaJGqu
 GXySBkCl7gH5pvcMqklQtBkhkO3WunvUehba0gpKk6aHDSqGJZTbwy5lI1pvhLoI
 V02dCEfMZebx4ZX+32W/dlroP4t7stWc/RBVSbJC4vPUWcBK09VhW0Ny2CHKgvkD
 XazLafhWZhQBm3T2KkmU7SnZnpodnatzwwsjaIe/mKfPlWLbmiBYK2Mqv86AZ5u8
 8YkUCmc/RvaWV5cY2r2mQ1iNFCcunHlwcR0o/WJVF3mDzkqZhuUXFxlJf0lUJej/
 oIOtMXMqziMm1aQXTY+H0KP37WiVTUogSarolY3QeaMtsZ3f1O2hgfPD+LG8F09k
 ihkQ7HnYYWAGEovY9V59XQ/qdlj3TTaJrtA0rkeMtav7MXtF7BvvQi8ivD2Ou3ko
 J9KGK8kcmkcQ0uHDq0y59ZO3r3kGXwZgdEnzVtcAceFYdehdCYOUrd89zUGEOze5
 tN/XXEycRb3PpDsMMasA
 =PcLW
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-v4.20' of https://github.com/bzolnier/linux

Pull fbdev updates from Bartlomiej Zolnierkiewicz:
 "No major changes to the subsystem itself, mainly fb drivers fixes &
  cleanups (atyfb & udlfb updates stand out from the rest) + removal of
  no longer needed old clps711xfb driver.

  Details:

   - update atyfb driver - improvements for ATI Mach64 chips: detect the
     dot clock divider correctly on Sparc, fix display corruptions (due
     to endianness issues and improper reading of accelerator
     registers), optimize scrolling performance and also fix debugging
     printks (Mikulas Patocka)

   - rewrite USB unplug handling in udlfb driver using framebuffer
     subsystem reference counting (Mikulas Patocka)

   - fix support for native-mode display-timings in atmel_lcdfb driver
     (Sam Ravnborg)

   - fix information leak & add missing access_ok() checks in sbuslib
     (Dan Carpenter)

   - allow using GPIO expanders that can sleep in ssd1307fb driver
     (Michal Vokáč)

   - convert omapfb driver to use GPIO descriptors instead of GPIO
     numbers for Amstrad Delta board (Janusz Krzysztofik)

   - fix broken Kconfig menu dependencies (Randy Dunlap)

   - convert fbdev subsystem to use %pOFn instead of device_node.name
     (Rob Herring)

   - remove the dead old CLPS711x LCD support driver (the new CLPS711x
     LCD support driver is still available)

   - misc fixes (Jia-Ju Bai, Gustavo A. R. Silva)

   - misc cleanups (Mehdi Bounya, Nathan Chancellor, YueHaibing)"

* tag 'fbdev-v4.20' of https://github.com/bzolnier/linux: (22 commits)
  video: fbdev: remove redundant 'default n' from Kconfig-s
  video: fbdev: remove dead old CLPS711x LCD support driver
  Revert "video: ssd1307fb: Do not hard code active-low reset sequence"
  video: fbdev: arcfb: mark expected switch fall-through
  pxa168fb: remove set but not used variables 'mi'
  video: ssd1307fb: Do not hard code active-low reset sequence
  video: ssd1307fb: Use gpiod_set_value_cansleep() for reset
  fbdev: fix broken menu dependencies
  video: fbdev: sis: Remove unnecessary parentheses and commented code
  video: fbdev: omapfb: lcd_ams_delta: use GPIO lookup table
  fbdev: sbuslib: integer overflow in sbusfb_ioctl_helper()
  fbdev: sbuslib: use checked version of put_user()
  fbdev: Convert to using %pOFn instead of device_node.name
  atmel_lcdfb: support native-mode display-timings
  Video: vgastate: fixed a spacing coding style
  atyfb: fix debugging printks
  mach64: optimize wait_for_fifo
  mach64: fix image corruption due to reading accelerator registers
  mach64: fix display corruption on big endian machines
  mach64: detect the dot clock divider correctly on sparc
  ...
2018-10-31 11:41:37 -07:00
Linus Torvalds
d547d44e5c Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:

 - Fix a use-after-free issue when unregistering a thermal cooling
   device (Dmitry Osipenko)

 - use power_efficient_wq for thermal worker to save more power (Jeson
   Gao)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: core: using power_efficient_wq for thermal worker
  thermal: core: Fix use-after-free in thermal_cooling_device_destroy_sysfs
2018-10-31 11:28:12 -07:00
Borislav Petkov
a324e9396c EDAC, skx: Fix randconfig builds
The driver depends on the ADXL component glue and selects it. However,
ADXL itself implicitly depends on ACPI and in nonsensical randconfig
builds like this:

  # CONFIG_ACPI is not set
  CONFIG_ACPI_ADXL=y

where ACPI is not enabled, the build fails with:

  drivers/edac/skx_edac.o: In function `skx_mce_check_error':
  skx_edac.c:(.text+0xab): undefined reference to `adxl_decode'
  drivers/edac/skx_edac.o: In function `skx_init':
  skx_edac.c:(.init.text+0x8bf): undefined reference to `adxl_get_component_names'
  make: *** [vmlinux] Error 1

Add stubs for that case so that the build succeeds. CONFIG_ACPI=n
doesn't make any sense for real configurations but this fix will at
least silence randconfig builds.

Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
2018-10-31 19:24:21 +01:00
Linus Torvalds
519f64bf15 This time it looks like a quieter release cycle in the clk tree. I guess that's
because of summer time holidays/vacations. The biggest change in the diffstat
 is in the Qualcomm clk driver, where they got support for CPUs and handful of
 SoCs. After that, the at91 driver got a major rewrite for newer DT bindings
 that should make things easier going forward and the TI code moved to a
 clockdomain based design. The long tail is mostly small driver updates for
 newer clks and some simpler SoC clock drivers such as the Hisilicon and imx
 support.
 
 In the core framework, we only have two small changes this time. One is a new
 clk API to get all clks for a device with the bulk clk APIs. This allows
 drivers that don't care about doing anything besides turning on all the clks to
 just clk_get() them all and turn them on. The other change is the beginning of
 a way to support save and restore of clk settings in the clk framework. TI is
 the only user right now, but we will want to expand upon this design in the
 future to support more save and restore of clk registers.  At least this gets
 us started and works well enough for one SoC, but there's more work in the
 future.
 
 Core:
  - clk_bulk_get_all() API and friends to get all the clks for a device
  - Basic clk state save/restore hooks
 
 New Drivers:
  - Renesas RZ/A2 (R7S9210) SoC, including early clocks
  - Rensas RZ/G1N (R8A7744) and RZ/G2E (R8A774C0) SoCs
  - Rensas RZ/G2M (r8a774a1) SoC
  - Qualcomm Krait CPU clk support
  - Qualcomm QCS404 GCC support
  - Qualcomm SDM660 GCC support
  - Qualcomm SDM845 camera clock controller
  - Ingenic jz4725b CGU
  - Hisilicon 3670 SoC support
  - TI SCI clks on K3 SoCs
  - iMX6 MMDC clks
  - Reset Controller (RMU) support for Actions Semi Owl S900 and S700 SoCs
 
 Updates:
  - Rework at91 PMC clock driver for new DT bindings
  - Nvidia Tegra clk driver MBIST workaround fix
  - S2RAM support for Marvell mvebu periph clks
  - Use updated printk format for OF node names
  - Fix TI code to only search DT subnodes
  - Various static analysis finds
  - Tag various drivers with SPDX license tags
  - Support dynamic frequency switching (DFS) on qcom SDM845 GCC
  - Only use s2mps11 dt-binding defines instead of redefining them in the driver
  - Add some more missing clks to qcom MSM8996 GCC
  - Quad SPI clks on qcom SDM845
  - Add support for CMT timer clocks on R-Car V3H
  - Add support for SHDI and various timer clocks on R-Car V3M
  - Improve OSC and RCLK (watchdog) handling on R-Car Gen3 SoCs
  - Amlogic clk-pll driver improvements and updates
  - Amlogic axg audio controller system clocks
  - Register Amlogic meson8b clock controller early
  - Add support for SATA and Fine Display Processor (FDP) clocks on R-Car M3-N
  - Consolidation of system suspend related code in Exynos, S5P, S3C SoC clk drivers
  - Fixes for system suspend support on Exynos542x (Odroid boards) and Exynos5433 SoC
  - Remove obsoleted Exynos4212 ISP clock definitions
  - Migrated TI am3/4/5 and dra7 SoCs to clockdomain based design
  - TI RTC+DDR sleep mode support for clock save/restore
  - Allwinner A64 display engine support and fixes
  - Allwinner A83t display engine support and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlvY4ysRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSVaDBAA3Wv/rsCn4FJ2ZgIWYWQqr69lAWDcBVVe
 4nNbFqzEmRoml8e+XOfVFwnbsai4B5ALVxyMnRlkDyxQ5TFQtF957U12Pf8upPa5
 R447YBt4tw40NCj8u5KNAaBmYYHdmXXDvsBPXyQn+1iy/9R8Is8AcDmv+D2ucuJF
 PPBXOwb+2CstUQhuwlXyvsAw/tqq/rJDVyAZVJUoqXJwlNMjr76V0m0ZXHN6NcyC
 F2SfnzIO4srRteTeKXVFcMU/3uHC3zofEfammSJjGZkk4WHULuPpkD17RMEyBul1
 Ju1S1nzGiKvYME/mmbIcRPNcpry65EVo/wn6IjAcG2m4GaWSq3F6qIttnoc6dnra
 R2VylIEy7HnNcAf8fkQdkd/l+h/TDp3iVrXg0p/rRxRk4Jlc86n2PWO6jtsZv4S+
 NySeRhTb51KrTl72J76LP+dfDWdbeZfkAqr0Qx6QM04OznVYSTHlnQaeM1Nx2SZR
 5+k126NdxDp7xgoJNfq18wzufrlefjuRTg2Kck1YuFuhV4Fjmq7ZC81bSSaakYPh
 /t073TcSZ+VfEYP5hVsl/pjMdFzHcj8pbavhs0UNIYLQNXe494Bm9PyYJOzQKnwz
 Zpbf7V6eplh8J1I03VI8RHviNp340iv2hhz9vp4mNP1vIhgdNiz7R2gn5sLSoFt+
 vei0J0vEzCA=
 =V5aK
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This time it looks like a quieter release cycle in the clk tree. I
  guess that's because of summer time holidays/vacations. The biggest
  change in the diffstat is in the Qualcomm clk driver, where they got
  support for CPUs and handful of SoCs. After that, the at91 driver got
  a major rewrite for newer DT bindings that should make things easier
  going forward and the TI code moved to a clockdomain based design.

  The long tail is mostly small driver updates for newer clks and some
  simpler SoC clock drivers such as the Hisilicon and imx support.

  In the core framework, we only have two small changes this time.

  One is a new clk API to get all clks for a device with the bulk clk
  APIs. This allows drivers that don't care about doing anything besides
  turning on all the clks to just clk_get() them all and turn them on.

  The other change is the beginning of a way to support save and restore
  of clk settings in the clk framework. TI is the only user right now,
  but we will want to expand upon this design in the future to support
  more save and restore of clk registers. At least this gets us started
  and works well enough for one SoC, but there's more work in the
  future.

  Core:
   - clk_bulk_get_all() API and friends to get all the clks for a device
   - Basic clk state save/restore hooks

  New Drivers:
   - Renesas RZ/A2 (R7S9210) SoC, including early clocks
   - Rensas RZ/G1N (R8A7744) and RZ/G2E (R8A774C0) SoCs
   - Rensas RZ/G2M (r8a774a1) SoC
   - Qualcomm Krait CPU clk support
   - Qualcomm QCS404 GCC support
   - Qualcomm SDM660 GCC support
   - Qualcomm SDM845 camera clock controller
   - Ingenic jz4725b CGU
   - Hisilicon 3670 SoC support
   - TI SCI clks on K3 SoCs
   - iMX6 MMDC clks
   - Reset Controller (RMU) support for Actions Semi Owl S900 and S700 SoCs

  Updates:
   - Rework at91 PMC clock driver for new DT bindings
   - Nvidia Tegra clk driver MBIST workaround fix
   - S2RAM support for Marvell mvebu periph clks
   - Use updated printk format for OF node names
   - Fix TI code to only search DT subnodes
   - Various static analysis finds
   - Tag various drivers with SPDX license tags
   - Support dynamic frequency switching (DFS) on qcom SDM845 GCC
   - Only use s2mps11 dt-binding defines instead of redefining them in the driver
   - Add some more missing clks to qcom MSM8996 GCC
   - Quad SPI clks on qcom SDM845
   - Add support for CMT timer clocks on R-Car V3H
   - Add support for SHDI and various timer clocks on R-Car V3M
   - Improve OSC and RCLK (watchdog) handling on R-Car Gen3 SoCs
   - Amlogic clk-pll driver improvements and updates
   - Amlogic axg audio controller system clocks
   - Register Amlogic meson8b clock controller early
   - Add support for SATA and Fine Display Processor (FDP) clocks on R-Car M3-N
   - Consolidation of system suspend related code in Exynos, S5P, S3C SoC clk drivers
   - Fixes for system suspend support on Exynos542x (Odroid boards) and Exynos5433 SoC
   - Remove obsoleted Exynos4212 ISP clock definitions
   - Migrated TI am3/4/5 and dra7 SoCs to clockdomain based design
   - TI RTC+DDR sleep mode support for clock save/restore
   - Allwinner A64 display engine support and fixes
   - Allwinner A83t display engine support and fixes"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (186 commits)
  clk: qcom: Remove unused arrays in SDM845 GCC
  clk: fixed-rate: fix of_node_get-put imbalance
  clk: s2mps11: Add used attribute to s2mps11_dt_match
  clk: qcom: gcc-sdm660: Add MODULE_LICENSE
  clk: qcom: Add safe switch hook for krait mux clocks
  dt-bindings: clock: Document qcom,krait-cc
  clk: qcom: Add Krait clock controller driver
  dt-bindings: arm: Document qcom,kpss-gcc
  clk: qcom: Add KPSS ACC/GCC driver
  clk: qcom: Add support for Krait clocks
  clk: qcom: Add IPQ806X's HFPLLs
  clk: qcom: Add MSM8960/APQ8064's HFPLLs
  dt-bindings: clock: Document qcom,hfpll
  clk: qcom: Add HFPLL driver
  clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
  ARM: Add Krait L2 register accessor functions
  clk: imx6q: add mmdc0 ipg clock
  clk: imx6sl: add mmdc ipg clocks
  clk: imx6sll: add mmdc1 ipg clock
  clk: imx6sx: add mmdc1 ipg clock
  ...
2018-10-31 11:08:30 -07:00
Radoslaw Tyl
6702185c1f ixgbe: fix MAC anti-spoofing filter after VFLR
This change resolves a driver bug where the driver is logging a
message that says "Spoofed packets detected". This can occur on the PF
(host) when a VF has VLAN+MACVLAN enabled and is re-started with a
different MAC address.

MAC and VLAN anti-spoofing filters are to be enabled together.

Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Acked-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-31 11:05:51 -07:00
Linus Torvalds
0c86e761b9 VFIO updates for v4.20
- EDID interfaces for vfio devices supporting display extensions
    (Gerd Hoffmann)
 
  - Generically select Type-1 IOMMU model support on ARM/ARM64
    (Geert Uytterhoeven)
 
  - Quirk for VFs reporting INTx pin (Alex Williamson)
 
  - Fix error path memory leak in MSI support (Li Qiang)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJb2MH7AAoJECObm247sIsiJ/wP+gOlhmUz7eVNhf8ZMC9+17Ev
 mWy41waHW4ATBWRxuaSNetLG0E3Cbt9IMpf6yx3YTuOiD+zCwUUJm934ZVfOUMWb
 yh5UEC2W4+fUt8HjDvYwuGlpyVeEwSTVnprtWjYz9bBsHbCeK7WY4vUeo6WHFrTt
 K+WOsYXC8TEzqj/VQ851Cr0Q23SzdlUFOWhKN0AO/CXshsOzL8An3Ryx95X26oPc
 HlVd1+KDOxpAKmfhA028HeT2GBy6Yu6EjJEGMwo66QtylwTJCPbNxTlg1/noYTTz
 1uV02FR7oAZcmuP6R4iKLr4UBfmJDs2hjIVS6Bcm561KL+tXAUl1FX91ky7snaRq
 0wqMUBJbAmDUEx2smFQI81LoE0OHN4T/u99uEe0cyZ/aNsAcnmbwWRS0rl/1s2eD
 AE9Ht05yMRDp4ENUc8aBKHbXWjId2HjxZwqAzAFd2moVpaD4W/4bZ1ZXssbGTaQk
 /VCXnYl8HJTqAjRwqChW6dc4d2tMaTDIU+FDD85yJVzg4DEZg4xJCAz6CWsGjYmr
 JWHh2iu8fO8FAFhqx5vNz2PzTQUWfi3yfGUNRSH7pFCX07AQ25LdSwQxOQ3eov/X
 YyqFINLscLePrAzw1WAAOk3ghCFBWw/mpIXyzShYNnrGnre+tzbzOSwSFcgMojlc
 nHP6PB+3S4VR24k6ZzUc
 =cat2
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v4.20-rc1.v2' of git://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:

 - EDID interfaces for vfio devices supporting display extensions (Gerd
   Hoffmann)

 - Generically select Type-1 IOMMU model support on ARM/ARM64 (Geert
   Uytterhoeven)

 - Quirk for VFs reporting INTx pin (Alex Williamson)

 - Fix error path memory leak in MSI support (Li Qiang)

* tag 'vfio-v4.20-rc1.v2' of git://github.com/awilliam/linux-vfio:
  vfio: add edid support to mbochs sample driver
  vfio: add edid api for display (vgpu) devices.
  drivers/vfio: Allow type-1 IOMMU instantiation with all ARM/ARM64 IOMMUs
  vfio/pci: Mask buggy SR-IOV VF INTx support
  vfio/pci: Fix potential memory leak in vfio_msi_cap_len
2018-10-31 11:01:38 -07:00
Mitch Williams
bb58fd7eef i40e: Update status codes
Add a few new status code which will be used by the ice driver, and
rename a few to make them more consistent. Error code are mapped to
similar values as in i40e_status.h, so as to be compatible with older
VF drivers not using this status enum.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-31 10:57:43 -07:00
Linus Torvalds
b3491d8430 media updates for v4.20-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJb2F9AAAoJEAhfPr2O5OEVm5YP/Ak53aAEI1oJNequwdTYKc+/
 2xWRpYWREa1g+x4MlqWO+szlPWbGXCUVwye8ii2N/xihLapsKVrLCr/dDd5khsvw
 bDux33BzpU3Ug/ncQKD6ZZv4vVRzG8DMPcpkOwSs0OoboJns6AkHVGCugR32qZsH
 3SH/r1aJce0oK1rrzgbYYZHTvaPshvY2IOLPKrtFmO+73iCVRhpSdWjFsY+q2Alp
 +3Ho/06iQYB2i+enXrwoIKHAYoXArXYbxS2dhaNz+NURrOAytmgfMisvvt67heHx
 IEilE0AcSjjlN/eyOxp+WCZrg9JLXVzZLX6ZnqqM2OEu1AS/XBultJBsGaN0hOiV
 dir2enoHNNOStI40hNSdbumg9I0Txmag2jtpaGyaBnnGmGRJ/JIYegCPRVMLygAf
 HHFHjR4fnRnqZrlh9OGAHaqc9RNlUgFVdlyqFtdyIah+aNeuij3o69mWM35QMLhw
 /0dTXBUXw9aD1dEg1cZ6PdzLWJgDd7n1gIdfzzzzLnzmBwmmhqxW8+evu9qSAXsP
 rnEZuE77HYKVfiacWMwpZK6+lT51STAE8ouo3N8fmaC+4RQmpq0dYXtR8RnlcSUD
 hKpJ6UsIIb5A6xKX7ed8x6FxV14TEEaa042A4eclxsAFiqqkNfWSozqV0vfW5vCD
 2lrsuN3knpfh7XDBSr0y
 =V4X4
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull new experimental media request API from Mauro Carvalho Chehab:
 "A new media request API

  This API is needed to support device drivers that can dynamically
  change their parameters for each new frame. The latest versions of
  Google camera and codec HAL depends on such feature.

  At this stage, it supports only stateless codecs.

  It has been discussed for a long time (at least over the last 3-4
  years), and we finally reached to something that seem to work.

  This series contain both the API and core changes required to support
  it and a new m2m decoder driver (cedrus).

  As the current API is still experimental, the only real driver using
  it (cedrus) was added at staging[1]. We intend to keep it there for a
  while, in order to test the API. Only when we're sure that this API
  works for other cases (like encoders), we'll move this driver out of
  staging and set the API into a stone.

  [1] We added support for the vivid virtual driver (used only for
  testing) to it too, as it makes easier to test the API for the ones
  that don't have the cedrus hardware"

* tag 'media/v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (53 commits)
  media: dt-bindings: Document the Rockchip VPU bindings
  media: platform: Add Cedrus VPU decoder driver
  media: dt-bindings: media: Document bindings for the Cedrus VPU driver
  media: v4l: Add definition for the Sunxi tiled NV12 format
  media: v4l: Add definitions for MPEG-2 slice format and metadata
  media: videobuf2-core: Rework and rename helper for request buffer count
  media: v4l2-ctrls.c: initialize an error return code with zero
  media: v4l2-compat-ioctl32.c: add missing documentation for a field
  media: media-request: update documentation
  media: media-request: EPERM -> EACCES/EBUSY
  media: v4l2-ctrls: improve media_request_(un)lock_for_update
  media: v4l2-ctrls: use media_request_(un)lock_for_access
  media: media-request: add media_request_(un)lock_for_access
  media: vb2: set reqbufs/create_bufs capabilities
  media: videodev2.h: add new capabilities for buffer types
  media: buffer.rst: only set V4L2_BUF_FLAG_REQUEST_FD for QBUF
  media: v4l2-ctrls: return -EACCES if request wasn't completed
  media: media-request: return -EINVAL for invalid request_fds
  media: vivid: add request support
  media: vivid: add mc
  ...
2018-10-31 10:53:29 -07:00
Jeff Kirsher
48e01e001d ixgbe/ixgbevf: fix XFRM_ALGO dependency
Based on the original work from Arnd Bergmann.

When XFRM_ALGO is not enabled, the new ixgbe IPsec code produces a
link error:

drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.o: In function `ixgbe_ipsec_vf_add_sa':
ixgbe_ipsec.c:(.text+0x1266): undefined reference to `xfrm_aead_get_byname'

Simply selecting XFRM_ALGO from here causes circular dependencies, so
to fix it, we probably want this slightly more complex solution that is
similar to what other drivers with XFRM offload do:

A separate Kconfig symbol now controls whether we include the IPsec
offload code. To keep the old behavior, this is left as 'default y'. The
dependency in XFRM_OFFLOAD still causes a circular dependency but is
not actually needed because this symbol is not user visible, so removing
that dependency on top makes it all work.

CC: Arnd Bergmann <arnd@arndb.de>
CC: Shannon Nelson <shannon.nelson@oracle.com>
Fixes: eda0333ac2 ("ixgbe: add VF IPsec management")
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
2018-10-31 10:53:15 -07:00
Jacob Keller
35ae5414e7 fm10k: bump driver version to match out-of-tree release
The upstream and out-of-tree drivers are once again at comparable
functionality. It's been a while since we updated the upstream driver
version, so bump it now.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-31 10:49:15 -07:00
Jacob Keller
9a1fe1e2bb fm10k: add missing device IDs to the upstream driver
The device IDs for the Ethernet SDI Adapter devices were never added to
the upstream driver. The IDs are already in the pci.ids database, and
are supported by the out-of-tree driver.

Add the device IDs now, so that the upstream driver can recognize and
load these devices.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-31 10:43:13 -07:00