Add a corruption check for passing an invalid block number, which is a
lot easier to understand than the xfs_bmapi_read failure later on.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Protect against developers passing stupid limits when refactoring the
RT code once again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
All callers pass a 0 limit to xfs_rtfind_back, so remove the argument
and hard code it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Split the RT geometry validation in the early mount code into a
helper than can be reused by repair (from which this code was
apparently originally stolen anyway).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: u64 return value for calc_rbmblocks]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Replace xfs_validate_rtextents with an open coded check for 0
rtextents. The name for the function implies it does a lot more
than a zero check, which is more obvious when open coded.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Pass the xfs_icreate_args object to xfs_dialloc since we can extract the
relevant mode (really just the file type) and parent inumber from there.
This simplifies the calling convention in preparation for the next
patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This patch introduces two more new ioctls to manage atomic updates to
file contents -- XFS_IOC_START_COMMIT and XFS_IOC_COMMIT_RANGE. The
commit mechanism here is exactly the same as what XFS_IOC_EXCHANGE_RANGE
does, but with the additional requirement that file2 cannot have changed
since some sampling point. The start-commit ioctl performs the sampling
of file attributes.
Note: This patch currently samples i_ctime during START_COMMIT and
checks that it hasn't changed during COMMIT_RANGE. This isn't entirely
safe in kernels prior to 6.12 because ctime only had coarse grained
granularity and very fast updates could collide with a COMMIT_RANGE.
With the multi-granularity ctime introduced by Jeff Layton, it's now
possible to update ctime such that this does not happen.
It is critical, then, that this patch must not be backported to any
kernel that does not support fine-grained file change timestamps.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
As a result of the factoring in commit 14dd46cf31 ("xfs: split
xfs_inobt_init_cursor"), mount started taking a long time on a
user's filesystem. For Anders, this made mount times regress from
under a second to over 15 minutes for a filesystem with only 30
million inodes in it.
Anders bisected it down to the above commit, but even then the bug
was not obvious. In this commit, over 20 calls to
xfs_inobt_init_cursor() were modified, and some we modified to call
a new function named xfs_finobt_init_cursor().
If that takes you a moment to reread those function names to see
what the rename was, then you have realised why this bug wasn't
spotted during review. And it wasn't spotted on inspection even
after the bisect pointed at this commit - a single missing "f" isn't
the easiest thing for a human eye to notice....
The result is that xfs_finobt_count_blocks() now incorrectly calls
xfs_inobt_init_cursor() so it is now walking the inobt instead of
the finobt. Hence when there are lots of allocated inodes in a
filesystem, mount takes a -long- time run because it now walks a
massive allocated inode btrees instead of the small, nearly empty
free inode btrees. It also means all the finobt space reservations
are wrong, so mount could potentially given ENOSPC on kernel
upgrade.
In hindsight, commit 14dd46cf31 should have been two commits - the
first to convert the finobt callers to the new API, the second to
modify the xfs_inobt_init_cursor() API for the inobt callers. That
would have made the bug very obvious during review.
Fixes: 14dd46cf31 ("xfs: split xfs_inobt_init_cursor")
Reported-by: Anders Blomdell <anders.blomdell@gmail.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
"KjellR" complained on IRC that an old V4 filesystem suddenly stopped
mounting after upgrading from 6.9.11 to 6.10.3, with the following splat
when trying to read the rt bitmap inode:
00000000: 49 4e 80 00 01 02 00 01 00 00 00 00 00 00 00 00 IN..............
00000010: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000020: 00 00 00 00 00 00 00 00 43 d2 a9 da 21 0f d6 30 ........C...!..0
00000030: 43 d2 a9 da 21 0f d6 30 00 00 00 00 00 00 00 00 C...!..0........
00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000050: 00 00 00 02 00 00 00 00 00 00 00 04 00 00 00 00 ................
00000060: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
As Dave Chinner points out, this is a V1 inode with both di_onlink and
di_nlink set to 1 and di_flushiter == 0. In other words, this inode was
formatted this way by mkfs and hasn't been touched since then.
Back in the old days of xfsprogs 3.2.3, I observed that libxfs_ialloc
would set di_nlink, but if the filesystem didn't have NLINK, it would
then set di_version = 1. libxfs_iflush_int later sees the V1 inode and
copies the value of di_nlink to di_onlink without zeroing di_onlink.
Eventually this filesystem must have been upgraded to support NLINK
because 6.10 doesn't support !NLINK filesystems, which is how we tripped
over this old behavior. The filesystem doesn't have a realtime section,
so that's why the rtbitmap inode has never been touched.
Fix this by removing the di_onlink/di_nlink checking for all V1/V2
inodes because this is a muddy mess. The V3 inode handling code has
always supported NLINK and written di_onlink==0 so keep that check.
The removal of the V1 inode handling code when we dropped support for
!NLINK obscured this old behavior.
Reported-by: kjell.m.randa@gmail.com
Fixes: 40cb8613d6 ("xfs: check unused nlink fields in the ondisk inode")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
In the macro definition of XFS_DQUOT_LOGRES, a parameter is accepted,
but it is not used. Hence, it should be removed.
This patch has only passed compilation test, but it should be fine.
Signed-off-by: Julian Sun <sunjunchao2870@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The pag in xfs_ag_resv_rmapbt_alloc() is already held when the struct
xfs_btree_cur is initialized in xfs_rmapbt_init_cursor(), so there is no
need to get pag again.
On the other hand, in xfs_rmapbt_free_block(), the similar function
xfs_ag_resv_rmapbt_free() was removed in commit 92a005448f ("xfs: get
rid of unnecessary xfs_perag_{get,put} pairs"), xfs_ag_resv_rmapbt_alloc()
was left because scrub used it, but now scrub has removed it. Therefore,
we could get rid of xfs_ag_resv_rmapbt_alloc() just like the rmap free
block, make the code cleaner.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Currently the AIL attempts to keep 25% of the "log space" free,
where the current used space is tracked by the reserve grant head.
That is, it tracks both physical space used plus the amount reserved
by transactions in progress.
When we start tail pushing, we are trying to make space for new
reservations by writing back older metadata and the log is generally
physically full of dirty metadata, and reservations for modifications
in flight take up whatever space the AIL can physically free up.
Hence we don't really need to take into account the reservation
space that has been used - we just need to keep the log tail moving
as fast as we can to free up space for more reservations to be made.
We know exactly how much physical space the journal is consuming in
the AIL (i.e. max LSN - min LSN) so we can base push thresholds
directly on this state rather than have to look at grant head
reservations to determine how much to physically push out of the
log.
This also allows code that needs to know if log items in the current
transaction need to be pushed or re-logged to simply sample the
current target - they don't need to calculate the current target
themselves. This avoids the need for any locking when doing such
checks.
Further, moving to a physical target means we don't need "push all
until empty semantics" like were introduced in the previous patch.
We can now test and clear the "push all" as a one-shot command to
set the target to the current head of the AIL. This allows the
xfsaild to maximise the use of log space right up to the point where
conditions indicate that the xfsaild is not keeping up with load and
it needs to work harder, and as soon as those constraints go away
(i.e. external code no longer needs everything pushed) the xfsaild
will return to maintaining the normal 25% free space thresholds.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
We have a mechanism that checks the amount of log space remaining
available every time we make a transaction reservation. If the
amount of space is below a threshold (25% free) we push on the AIL
to tell it to do more work. To do this, we end up calculating the
LSN that the AIL needs to push to on every reservation and updating
the push target for the AIL with that new target LSN.
This is silly and expensive. The AIL is perfectly capable of
calculating the push target itself, and it will always be running
when the AIL contains objects.
What the target does is determine if the AIL needs to do
any work before it goes back to sleep. If we haven't run out of
reservation space or memory (or some other push all trigger), it
will simply go back to sleep for a while if there is more than 25%
of the journal space free without doing anything.
If there are items in the AIL at a lower LSN than the target, it
will try to push up to the target or to the point of getting stuck
before going back to sleep and trying again soon after.`
Hence we can modify the AIL to calculate it's own 25% push target
before it starts a push using the same reserve grant head based
calculation as is currently used, and remove all the places where we
ask the AIL to push to a new 25% free target. We can also drop the
minimum free space size of 256BBs from the calculation because the
25% of a minimum sized log is *always going to be larger than
256BBs.
This does still require a manual push in certain circumstances.
These circumstances arise when the AIL is not full, but the
reservation grants consume the entire of the free space in the log.
In this case, we still need to push on the AIL to free up space, so
when we hit this condition (i.e. reservation going to sleep to wait
on log space) we do a single push to tell the AIL it should empty
itself. This will keep the AIL moving as new reservations come in
and want more space, rather than keep queuing them and having to
push the AIL repeatedly.
The reason for using the "push all" when grant space runs out is
that we can run out of grant space when there is more than 25% of
the log free. Small logs are notorious for this, and we have a hack
in the log callback code (xlog_state_set_callback()) where we push
the AIL because the *head* moved) to ensure that we kick the AIL
when we consume space in it because that can push us over the "less
than 25% available" available that starts tail pushing back up
again.
Hence when we run out of grant space and are going to sleep, we have
to consider that the grant space may be consuming almost all the log
space and there is almost nothing in the AIL. In this situation, the
AIL pins the tail and moving the tail forwards is the only way the
grant space will come available, so we have to force the AIL to push
everything to guarantee grant space will eventually be returned.
Hence triggering a "push all" just before sleeping removes all the
nasty corner cases we have in other parts of the code that work
around the "we didn't ask the AIL to push enough to free grant
space" condition that leads to log space hangs...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
A concurrent file creation and little writing could unexpectedly return
-ENOSPC error since there is a race window that the allocator could get
the wrong agf->agf_longest.
Write file process steps:
1) Find the entry that best meets the conditions, then calculate the start
address and length of the remaining part of the entry after allocation.
2) Delete this entry and update the -current- agf->agf_longest.
3) Insert the remaining unused parts of this entry based on the
calculations in 1), and update the agf->agf_longest again if necessary.
Create file process steps:
1) Check whether there are free inodes in the inode chunk.
2) If there is no free inode, check whether there has space for creating
inode chunks, perform the no-lock judgment first.
3) If the judgment succeeds, the judgment is performed again with agf lock
held. Otherwire, an error is returned directly.
If the write process is in step 2) but not go to 3) yet, the create file
process goes to 2) at this time, it may be mistaken for no space,
resulting in the file system still has space but the file creation fails.
We have sent two different commits to the community in order to fix this
problem[1][2]. Unfortunately, both solutions have flaws. In [2], I
discussed with Dave and Darrick, realized that a better solution to this
problem requires the "last cnt record tracking" to be ripped out of the
generic btree code. And surprisingly, Dave directly provided his fix code.
This patch includes appropriate modifications based on his tmp-code to
address this issue.
The entire fix can be roughly divided into two parts:
1) Delete the code related to lastrec-update in the generic btree code.
2) Place the process of updating longest freespace with cntbt separately
to the end of the cntbt modifications. Move the cursor to the rightmost
firstly, and update the longest free extent based on the record.
Note that we can not update the longest with xfs_alloc_get_rec() after
find the longest record, as xfs_verify_agbno() may not pass because
pag->block_count is updated on the outside. Therefore, use
xfs_btree_get_rec() as a replacement.
[1] https://lore.kernel.org/all/20240419061848.1032366-2-yebin10@huawei.com
[2] https://lore.kernel.org/all/20240604071121.3981686-1-wozizhi@huawei.com
Reported by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Move the code that adds the incore xfs_refcount_update_item deferred
work data to a transaction live with the CUI log item code. This means
that the refcount code no longer has to know about the inner workings of
the CUI log items.
As a consequence, we can get rid of the _{get,put}_group helpers.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Only update rcur when we know the final *pcur value.
Inspired-by: Christoph Hellwig <hch@lst.de>
[djwong: don't leave the caller with a dangling ref]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In xfs_refcount_finish_one we know the cursor is non-zero when calling
xfs_refcount_finish_one_cleanup and we pass a 0 error variable. This
means xfs_refcount_finish_one_cleanup is just doing a
xfs_btree_del_cursor.
Open code that and move xfs_refcount_finish_one_cleanup to
fs/xfs/xfs_refcount_item.c.
Inspired-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Pass the incore refcount intent structure to the tracepoints instead of
open-coding the argument passing.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Prepare the rest of refcount btree tracepoints for use with realtime
reflink by making them take the btree cursor object as a parameter.
This will save us a lot of trouble later on.
Remove the xfs_refcount_recover_extent tracepoint since it's already
covered by other refcount tracepoints.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The only user of the "ag" tracepoint event classes is the refcount
btree, so rename them to make that obvious and make them take the btree
cursor to simplify the arguments. This will save us a lot of trouble
later on.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Convert all the refcount tracepoints to use the btree error tracepoint
class.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the code that adds the incore xfs_rmap_update_item deferred work
data to a transaction to live with the RUI log item code. This means
that the rmap code no longer has to know about the inner workings of the
RUI log items.
As a consequence, we can get rid of the _{get,put}_group helpers.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Only update rcur when we know the final *pcur value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[djwong: don't leave the caller with a dangling ref]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
In xfs_rmap_finish_one we known the cursor is non-zero when calling
xfs_rmap_finish_one_cleanup and we pass a 0 error variable. This means
xfs_rmap_finish_one_cleanup is just doing a xfs_btree_del_cursor.
Open code that and move xfs_rmap_finish_one_cleanup to
fs/xfs/xfs_rmap_item.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: minor porting changes]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Pass the incore rmap structure to the tracepoints instead of open-coding
the argument passing.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Prepare the rmap btree tracepoints for use with realtime rmap btrees by
making them take the btree cursor object as a parameter. This will save
us a lot of trouble later on.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a new tracepoint class for btree-related errors, then convert all
the rmap tracepoints to use it. Also fix the one tracepoint that was
abusing the old class by making it a separate tracepoint.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the code that adds the incore xfs_extent_free_item deferred work
data to a transaction to live with the EFI log item code. This means
that the allocator code no longer has to know about the inner workings
of the EFI log items.
As a consequence, we can get rid of the _{get,put}_group helpers.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs_free_extent_later can handle the extra AGFL special casing with
very little extra logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The bno/len verification is already done by the calls to
xfs_verify_rtbext / xfs_verify_fsbext, and reporting a corruption error
seem like the better handling than tripping an assert anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Convert the boolean to skip discard on free into a proper flags field so
that we can add more flags in the next patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Pass the incore EFI structure to the tracepoints instead of open-coding
the argument passing. This cleans up the call sites a bit.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Currently, the XFS_SB_CRC_OFF macro uses the incore superblock struct
(xfs_sb) to compute the address of sb_crc within the ondisk superblock
struct (xfs_dsb). This is a landmine if we ever change the layout of
the incore superblock (as we're about to do), so redefine the macro
to use xfs_dsb to compute the layout of xfs_dsb.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the directory entry update hook code to xfs_dir2 so that it is
mostly consolidated with the higher level directory functions. Retain
the exports so that online fsck can still send notifications through the
hooks.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a new libxfs function to rename two directory entries. The
upcoming metadata directory feature will need this to replace a metadata
inode directory entry.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a new libxfs function to exchange two directory entries.
The upcoming metadata directory feature will need this to replace a
metadata inode directory entry.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a new libxfs function to remove a (name, inode) entry from a
directory. The upcoming metadata directory feature will need this to
create a metadata directory tree.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a libxfs helper function that marks an inode free on disk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a new libxfs function to link an existing inode into a directory.
The upcoming metadata directory feature will need this to create a
metadata directory tree.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a new libxfs function to link a newly created inode into a
directory. The upcoming metadata directory feature will need this to
create a metadata directory tree.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
INIT_XATTRS is overloaded here -- it's set during the creat process when
we think that we're immediately going to set some ACL xattrs to save
time. However, it's also used by the parent pointers code to enable the
attr fork in preparation to receive ppptr xattrs. This results in
xfs_has_parent() branches scattered around the codebase to turn on
INIT_XATTRS.
Linkable files are created far more commonly than unlinkable temporary
files or directory tree roots, so we should centralize this logic in
xfs_inode_init. For the three callers that don't want parent pointers
(online repiar tempfiles, unlinkable tempfiles, rootdir creation) we
provide an UNLINKABLE flag to skip attr fork initialization.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move all the code that initializes a new inode's attributes from the
icreate_args structure and the parent directory into libxfs.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There are two parts to initializing a newly allocated inode: setting up
the incore structures, and initializing the new inode core based on the
parent inode and the current user's environment. The initialization
code is not specific to the kernel, so we would like to share that with
userspace by hoisting it to libxfs. Therefore, split xfs_icreate into
separate functions to prepare for the next few patches.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Enable xfs_trans_ichgtime to change the inode access time so that we can
use this function to set inode times when allocating inodes instead of
open-coding it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Callers that want to create an inode currently pass all possible file
attribute values for the new inode into xfs_init_new_inode as ten
separate parameters. This causes two code maintenance issues: first, we
have large multi-line call sites which programmers must read carefully
to make sure they did not accidentally invert a value. Second, all
three file id parameters must be passed separately to the quota
functions; any discrepancy results in quota count errors.
Clean this up by creating a new icreate_args structure to hold all this
information, some helpers to initialize them properly, and make the
callers pass this structure through to the creation function, whose name
we shorten to xfs_icreate. This eliminates the issues, enables us to
keep the inode init code in sync with userspace via libxfs, and is
needed for future metadata directory tree management.
(A subsequent cleanup will also fix the quota alloc calls.)
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Hoist the inode flag conversion functions into libxfs so that we can
keep them in sync. Do this by creating a new xfs_inode_util.c file in
libxfs.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the extent size helpers to xfs_bmap.c in libxfs since they're used
there already.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
