loop_lookup has two callers - one wants to do the a find by index and the
other wants any unbound loop device. Open code the respective
functionality in each caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210623145908.92973-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Passing a negative index to loop_lookup while return any unbound device.
Doing that for a delete does not make much sense, so add check to
explicitly reject that case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210623145908.92973-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move acquiring and releasing loop_ctl_mutex from the callers into
loop_add.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210623145908.92973-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split loop_control_ioctl into a helper for each command. This keeps the
code nicely separated for the upcoming locking changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210623145908.92973-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
None of the callers cares about the allocated struct loop_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210623145908.92973-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
loop_ctl_mutex is only needed to iterate the IDR for removing the loop
devices, so reduce the coverage.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210623145908.92973-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unregister the misc and blockdevice first to prevent further access,
and only then iterate to remove the devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210623145908.92973-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=D6dS
-----END PGP SIGNATURE-----
Merge tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Pretty calm round, mostly just NVMe and a bit of MD:
- NVMe updates (via Christoph)
- improve the APST configuration algorithm (Alexey Bogoslavsky)
- look for StorageD3Enable on companion ACPI device
(Mario Limonciello)
- allow selecting the network interface for TCP connections
(Martin Belanger)
- misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King,
Christoph)
- move the ACPI StorageD3 code to drivers/acpi/ and add quirks
for certain AMD CPUs (Mario Limonciello)
- zoned device support for nvmet (Chaitanya Kulkarni)
- fix the rules for changing the serial number in nvmet
(Noam Gottlieb)
- various small fixes and cleanups (Dan Carpenter, JK Kim,
Chaitanya Kulkarni, Hannes Reinecke, Wesley Sheng, Geert
Uytterhoeven, Daniel Wagner)
- MD updates (Via Song)
- iostats rewrite (Guoqing Jiang)
- raid5 lock contention optimization (Gal Ofri)
- Fall through warning fix (Gustavo)
- Misc fixes (Gustavo, Jiapeng)"
* tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block: (78 commits)
nvmet: use NVMET_MAX_NAMESPACES to set nn value
loop: Fix missing discard support when using LOOP_CONFIGURE
nvme.h: add missing nvme_lba_range_type endianness annotations
nvme: remove zeroout memset call for struct
nvme-pci: remove zeroout memset call for struct
nvmet: remove zeroout memset call for struct
nvmet: add ZBD over ZNS backend support
nvmet: add Command Set Identifier support
nvmet: add nvmet_req_bio put helper for backends
nvmet: add req cns error complete helper
block: export blk_next_bio()
nvmet: remove local variable
nvmet: use nvme status value directly
nvmet: use u32 type for the local variable nsid
nvmet: use u32 for nvmet_subsys max_nsid
nvmet: use req->cmd directly in file-ns fast path
nvmet: use req->cmd directly in bdev-ns fast path
nvmet: make ver stable once connection established
nvmet: allow mn change if subsys not discovered
nvmet: make sn stable once connection was established
...
The current code only associates with the existing blkcg when aio is used
to access the backing file. This patch covers all types of i/o to the
backing file and also associates the memcg so if the backing file is on
tmpfs, memory is charged appropriately.
This patch also exports cgroup_get_e_css and int_active_memcg so it can be
used by the loop module.
Link: https://lkml.kernel.org/r/20210610173944.1203706-4-schatzberg.dan@gmail.com
Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: Chris Down <chris@chrisdown.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Charge loop device i/o to issuing cgroup", v14.
The loop device runs all i/o to the backing file on a separate kworker
thread which results in all i/o being charged to the root cgroup. This
allows a loop device to be used to trivially bypass resource limits and
other policy. This patch series fixes this gap in accounting.
A simple script to demonstrate this behavior on cgroupv2 machine:
'''
#!/bin/bash
set -e
CGROUP=/sys/fs/cgroup/test.slice
LOOP_DEV=/dev/loop0
if [[ ! -d $CGROUP ]]
then
sudo mkdir $CGROUP
fi
grep oom_kill $CGROUP/memory.events
# Set a memory limit, write more than that limit to tmpfs -> OOM kill
sudo unshare -m bash -c "
echo \$\$ > $CGROUP/cgroup.procs;
echo 0 > $CGROUP/memory.swap.max;
echo 64M > $CGROUP/memory.max;
mount -t tmpfs -o size=512m tmpfs /tmp;
dd if=/dev/zero of=/tmp/file bs=1M count=256" || true
grep oom_kill $CGROUP/memory.events
# Set a memory limit, write more than that limit through loopback
# device -> no OOM kill
sudo unshare -m bash -c "
echo \$\$ > $CGROUP/cgroup.procs;
echo 0 > $CGROUP/memory.swap.max;
echo 64M > $CGROUP/memory.max;
mount -t tmpfs -o size=512m tmpfs /tmp;
truncate -s 512m /tmp/backing_file
losetup $LOOP_DEV /tmp/backing_file
dd if=/dev/zero of=$LOOP_DEV bs=1M count=256;
losetup -D $LOOP_DEV" || true
grep oom_kill $CGROUP/memory.events
'''
Naively charging cgroups could result in priority inversions through the
single kworker thread in the case where multiple cgroups are
reading/writing to the same loop device. This patch series does some
minor modification to the loop driver so that each cgroup can make forward
progress independently to avoid this inversion.
With this patch series applied, the above script triggers OOM kills when
writing through the loop device as expected.
This patch (of 3):
Existing uses of loop device may have multiple cgroups reading/writing to
the same device. Simply charging resources for I/O to the backing file
could result in priority inversion where one cgroup gets synchronously
blocked, holding up all other I/O to the loop device.
In order to avoid this priority inversion, we use a single workqueue where
each work item is a "struct loop_worker" which contains a queue of struct
loop_cmds to issue. The loop device maintains a tree mapping blk css_id
-> loop_worker. This allows each cgroup to independently make forward
progress issuing I/O to the backing file.
There is also a single queue for I/O associated with the rootcg which can
be used in cases of extreme memory shortage where we cannot allocate a
loop_worker.
The locking for the tree and queues is fairly heavy handed - we acquire a
per-loop-device spinlock any time either is accessed. The existing
implementation serializes all I/O through a single thread anyways, so I
don't believe this is any worse.
[colin.king@canonical.com: fixes]
Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com
Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com
Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
bdev_disk_changed can only operate on whole devices. Make that clear
by passing a gendisk instead of the struct block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210624123240.441814-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Without calling loop_config_discard() the discard flag and parameters
aren't set/updated for the loop device and worst-case they could
indicate discard support when it isn't the case (ex: if the
LOOP_SET_STATUS ioctl was used with a different file prior to
LOOP_CONFIGURE).
Cc: <stable@vger.kernel.org> # 5.8.x-
Fixes: 3448914e8c ("loop: Add LOOP_CONFIGURE ioctl")
Signed-off-by: Kristian Klausen <kristian@klausen.dk>
Link: https://lore.kernel.org/r/20210618115157.31452-1-kristian@klausen.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We must release the queue before freeing the tagset.
Fixes: 1c99502fae ("loop: use blk_mq_alloc_disk and blk_cleanup_disk")
Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=LOdw
-----END PGP SIGNATURE-----
Merge tag 'block-5.13-2021-06-12' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes that should go into 5.13:
- Fix a regression deadlock introduced in this release between open
and remove of a bdev (Christoph)
- Fix an async_xor md regression in this release (Xiao)
- Fix bcache oversized read issue (Coly)"
* tag 'block-5.13-2021-06-12' of git://git.kernel.dk/linux-block:
block: loop: fix deadlock between open and remove
async_xor: check src_offs is not NULL before updating it
bcache: avoid oversized read request in cache missing code path
bcache: remove bcache device self-defined readahead
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210602065345.355274-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit c76f48eb5c ("block: take bd_mutex around delete_partitions in
del_gendisk") adds disk->part0->bd_mutex in del_gendisk(), this way
causes the following AB/BA deadlock between removing loop and opening
loop:
1) loop_control_ioctl(LOOP_CTL_REMOVE)
-> mutex_lock(&loop_ctl_mutex)
-> del_gendisk
-> mutex_lock(&disk->part0->bd_mutex)
2) blkdev_get_by_dev
-> mutex_lock(&disk->part0->bd_mutex)
-> lo_open
-> mutex_lock(&loop_ctl_mutex)
Add a new Lo_deleting state to remove the need for clearing
->private_data and thus holding loop_ctl_mutex in the ioctl
LOOP_CTL_REMOVE path.
Based on an analysis and earlier patch from
Ming Lei <ming.lei@redhat.com>.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: c76f48eb5c ("block: take bd_mutex around delete_partitions in del_gendisk")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210605140950.5800-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the per-block device bd_mutex with a per-gendisk open_mutex,
thus simplifying locking wherever we deal with partitions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20210525061301.2242282-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
My UEK-derived config has 1030 files depending on pagemap.h before this
change. Afterwards, just 326 files need to be rebuilt when I touch
pagemap.h. I think blkdev.h is probably included too widely, but
untangling that dependency is harder and this solves my problem. x86
allmodconfig builds, but there may be implicit include problems on other
architectures.
Link: https://lkml.kernel.org/r/20210309195747.283796-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Dan Williams <dan.j.williams@intel.com> [nvdimm]
Acked-by: Jens Axboe <axboe@kernel.dk> [block]
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: Martin K. Petersen <martin.petersen@oracle.com> [scsi]
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=ccMs
-----END PGP SIGNATURE-----
Merge tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"A few stragglers (and one due to me missing it originally), and fixes
for changes in this merge window mostly. In particular:
- blktrace cleanups (Chaitanya, Greg)
- Kill dead blk_pm_* functions (Bart)
- Fixes for the bio alloc changes (Christoph)
- Fix for the partition changes (Christoph, Ming)
- Fix for turning off iopoll with polled IO inflight (Jeffle)
- nbd disconnect fix (Josef)
- loop fsync error fix (Mauricio)
- kyber update depth fix (Yang)
- max_sectors alignment fix (Mikulas)
- Add bio_max_segs helper (Matthew)"
* tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-block: (21 commits)
block: Add bio_max_segs
blktrace: fix documentation for blk_fill_rw()
block: memory allocations in bounce_clone_bio must not fail
block: remove the gfp_mask argument to bounce_clone_bio
block: fix bounce_clone_bio for passthrough bios
block-crypto-fallback: use a bio_set for splitting bios
block: fix logging on capacity change
blk-settings: align max_sectors on "logical_block_size" boundary
block: reopen the device in blkdev_reread_part
block: don't skip empty device in in disk_uevent
blktrace: remove debugfs file dentries from struct blk_trace
nbd: handle device refs for DESTROY_ON_DISCONNECT properly
kyber: introduce kyber_depth_updated()
loop: fix I/O error on fsync() in detached loop devices
block: fix potential IO hang when turning off io_poll
block: get rid of the trace rq insert wrapper
blktrace: fix blk_rq_merge documentation
blktrace: fix blk_rq_issue documentation
blktrace: add blk_fill_rwbs documentation comment
block: remove superfluous param in blk_fill_rwbs()
...
Pull misc vfs updates from Al Viro:
"Assorted stuff pile - no common topic here"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
whack-a-mole: don't open-code iminor/imajor
9p: fix misuse of sscanf() in v9fs_stat2inode()
audit_alloc_mark(): don't open-code ERR_CAST()
fs/inode.c: make inode_init_always() initialize i_ino to 0
vfs: don't unnecessarily clone write access for writable fds
There's an I/O error on fsync() in a detached loop device
if it has been previously attached.
The issue is write cache is enabled in the attach path in
loop_configure() but it isn't disabled in the detach path;
thus it remains enabled in the block device regardless of
whether it is attached or not.
Now fsync() can get an I/O request that will just be failed
later in loop_queue_rq() as device's state is not 'Lo_bound'.
So, disable write cache in the detach path.
Do so based on the queue flag, not the loop device flag for
read-only (used to enable) as the queue flag can be changed
via sysfs even on read-only loop devices (e.g., losetup -r.)
Test-case:
# DEV=/dev/loop7
# IMG=/tmp/image
# truncate --size 1M $IMG
# losetup $DEV $IMG
# losetup -d $DEV
Before:
# strace -e fsync parted -s $DEV print 2>&1 | grep fsync
fsync(3) = -1 EIO (Input/output error)
Warning: Error fsyncing/closing /dev/loop7: Input/output error
[ 982.529929] blk_update_request: I/O error, dev loop7, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
After:
# strace -e fsync parted -s $DEV print 2>&1 | grep fsync
fsync(3) = 0
Co-developed-by: Eric Desrochers <eric.desrochers@canonical.com>
Signed-off-by: Eric Desrochers <eric.desrochers@canonical.com>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Tested-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, loop device has only one global lock: loop_ctl_mutex.
This becomes hot in scenarios where many loop devices are used.
Scale it by introducing per-device lock: lo_mutex that protects
modifications of all fields in struct loop_device.
Keep loop_ctl_mutex to protect global data: loop_index_idr, loop_lookup,
loop_add.
The new lock ordering requirement is that loop_ctl_mutex must be taken
before lo_mutex.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=ayp2
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Nothing major in here:
- NVMe pull request from Christoph:
- nvmet passthrough improvements (Chaitanya Kulkarni)
- fcloop error injection support (James Smart)
- read-only support for zoned namespaces without Zone Append
(Javier González)
- improve some error message (Minwoo Im)
- reject I/O to offline fabrics namespaces (Victor Gladkov)
- PCI queue allocation cleanups (Niklas Schnelle)
- remove an unused allocation in nvmet (Amit Engel)
- a Kconfig spelling fix (Colin Ian King)
- nvme_req_qid simplication (Baolin Wang)
- MD pull request from Song:
- Fix race condition in md_ioctl() (Dae R. Jeong)
- Initialize read_slot properly for raid10 (Kevin Vigor)
- Code cleanup (Pankaj Gupta)
- md-cluster resync/reshape fix (Zhao Heming)
- Move null_blk into its own directory (Damien Le Moal)
- null_blk zone and discard improvements (Damien Le Moal)
- bcache race fix (Dongsheng Yang)
- Set of rnbd fixes/improvements (Gioh Kim, Guoqing Jiang, Jack Wang,
Lutz Pogrell, Md Haris Iqbal)
- lightnvm NULL pointer deref fix (tangzhenhao)
- sr in_interrupt() removal (Sebastian Andrzej Siewior)
- FC endpoint security support for s390/dasd (Jan Höppner, Sebastian
Ott, Vineeth Vijayan). From the s390 arch guys, arch bits included
as it made it easier for them to funnel the feature through the
block driver tree.
- Follow up fixes (Colin Ian King)"
* tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block: (64 commits)
block: drop dead assignments in loop_init()
sr: Remove in_interrupt() usage in sr_init_command().
sr: Switch the sector size back to 2048 if sr_read_sector() changed it.
cdrom: Reset sector_size back it is not 2048.
drivers/lightnvm: fix a null-ptr-deref bug in pblk-core.c
null_blk: Move driver into its own directory
null_blk: Allow controlling max_hw_sectors limit
null_blk: discard zones on reset
null_blk: cleanup discard handling
null_blk: Improve implicit zone close
null_blk: improve zone locking
block: Align max_hw_sectors to logical blocksize
null_blk: Fail zone append to conventional zones
null_blk: Fix zone size initialization
bcache: fix race between setting bdev state to none and new write request direct to backing
block/rnbd: fix a null pointer dereference on dev->blk_symlink_name
block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name
block/rnbd: call kobject_put in the failure path
Documentation/ABI/rnbd-srv: add document for force_close
block/rnbd-srv: close a mapped device from server side.
...
Commit 8410d38c25 ("loop: use __register_blkdev to allocate devices on
demand") simplified loop_init(); so computing the range of the block region
is not required anymore and can be dropped.
Drop dead assignments in loop_init().
As compilers will detect these unneeded assignments and optimize this,
the resulting object code is identical before and after this change.
No functional change. No change in object code.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that the hd_struct always has a block device attached to it, there is
no need for having two size field that just get out of sync.
Additionally the field in hd_struct did not use proper serialization,
possibly allowing for torn writes. By only using the block_device field
this problem also gets fixed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stop passing the whole device as a separate argument given that it
can be trivially deducted and cleanup the !holder debug check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that each hd_struct has a reference to the corresponding
block_device, there is no need for the bd_contains pointer. Add
a bdev_whole() helper to look up the whole device block_device
struture instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch the block device lookup interfaces to directly work with a dev_t
so that struct block_device references are only acquired by the
blkdev_get variants (and the blk-cgroup special case). This means that
we now don't need an extra reference in the inode and can generally
simplify handling of struct block_device to keep the lookups contained
in the core block layer code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
set_blocksize is used by file systems to use their preferred buffer cache
block size. Block drivers should not set it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The update_bdev argument is always set to true, so remove it. Also
rename the function to the slighly less verbose set_capacity_and_notify,
as propagating the disk size to the block device isn't really
revalidation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no good reason to call revalidate_disk_size separately.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the simpler mechanism attached to major_name to allocate a brd device
when a currently unregistered minor is accessed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use set_disk_ro instead of set_device_ro to match all other block
drivers and to ensure all partitions mirror the read-only flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 716ad0986c ("loop: Switch to set_capacity_revalidate_and_notify")
causes an occasional drop of loop device uevent, which are no longer
triggered in loop_set_size() but in a different part of code.
Bug is reproducible with LTP test uevent01 [1]:
i=0; while true; do
i=$((i+1)); echo "== $i =="
lsmod |grep -q loop && rmmod -f loop
./uevent01 || break
done
Put back triggering through code called in loop_set_size().
Fix required to add yet another parameter to
set_capacity_revalidate_and_notify().
[1] https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/uevents/uevent01.c
[hch: rebased on a different change to the prototype of
set_capacity_revalidate_and_notify]
Cc: stable@vger.kernel.org # v5.9
Fixes: 716ad0986c ("loop: Switch to set_capacity_revalidate_and_notify")
Reported-by: <ltp@lists.linux.it>
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace bd_set_size with a version that takes the number of sectors
instead, as that fits most of the current and future callers much better.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl9JYHoQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpjMMD/9pp/oWPRv2pRXf7JBdQUh7zznIg84Uzv6c
6Bkfq3eGRk/Rvv21kqbI5gZOnp3/se4M3DNBph89/6Q3idlHAot9UCIAVtsQ2+I6
p/kNKMMkzIguxP0B6pb9aQTjuvSxUOuxNgGVDU8akPktjDj7Gv/gxIQVchAHqXob
GL1vpBK/fvjiDHrXCCFVldCsm98P3FT7DzRvXkGXVW7Hg5KHuUVgCZtzeDMaB/dx
YeGenGm5ZCOLvM1N+jgmF89XSqUmrWlZz8iqFVGJfHRf0G0QwDc2mpdNusnZdXDr
sf1oG+uXszTTcK/w7/MPaHJyj6s7cKJOsXEnNUjU4VloOZvuemk3W8+t5qQ/+S/C
usPuUa+QhiqoDLa7YyYgNSO6lx70s+S58TLAEgRbU7SHq/g8huOBQ3YT0MYuhX9C
ZVGZfa2Yb+zWoQVFPqJcClCNjqzLihSo4qZnGSXiY7aDYM088mzLWnnFLkQ+axUq
lecWHGOkF5ComTePQV31YCHx9uPtRZzyRJ+bENbFIcQc/CztpARGbADAaphZjSmV
LXqHJyyNHlIo5IVITQm/qbdU9SdWS8bGNoYkB9Fa53sSWt6NIRfvXyWPE1OuyJ7C
ICaXyMvo+pM5nXo28BnPwO30tfN5byqnvb7P0g3l7j3Ej/ujkhGPmWDyvj27cnve
nrKgMZ9bXw==
=UytK
-----END PGP SIGNATURE-----
Merge tag 'block-5.9-2020-08-28' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- nbd timeout fix (Hou)
- device size fix for loop LOOP_CONFIGURE (Martijn)
- MD pull from Song with raid5 stripe size fix (Yufen)
* tag 'block-5.9-2020-08-28' of git://git.kernel.dk/linux-block:
md/raid5: make sure stripe_size as power of two
loop: Set correct device size when using LOOP_CONFIGURE
nbd: restore default timeout when setting it to zero
The device size calculation was done before processing the loop
configuration, which meant that the we set the size on the underlying
block device incorrectly in case lo_offset/lo_sizelimit were set in the
configuration. Delay computing the size until we've setup the device
parameters correctly.
Fixes: 3448914e8cc5("loop: Add LOOP_CONFIGURE ioctl")
Reported-by: Lennart Poettering <mzxreary@0pointer.de>
Tested-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com>
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=fAwK
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.9-2020-08-23' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Sagi:
- nvme completion rework from Christoph and Chao that mostly came
from a bit of divergence of how we classify errors related to
pathing/retry etc.
- nvmet passthru fixes from Chaitanya
- minor nvmet fixes from Amit and I
- mpath round-robin path selection fix from Martin
- ignore noiob for zoned devices from Keith
- minor nvme-fc fix from Tianjia"
- BFQ cgroup leak fix (Dmitry)
- block layer MAINTAINERS addition (Geert)
- fix null_blk FUA checking (Hou)
- get_max_io_size() size fix (Keith)
- fix block page_is_mergeable() for compound pages (Matthew)
- discard granularity fixes (Ming)
- IO scheduler ordering fix (Ming)
- misc fixes
* tag 'io_uring-5.9-2020-08-23' of git://git.kernel.dk/linux-block: (31 commits)
null_blk: fix passing of REQ_FUA flag in null_handle_rq
nvmet: Disable keep-alive timer when kato is cleared to 0h
nvme: redirect commands on dying queue
nvme: just check the status code type in nvme_is_path_error
nvme: refactor command completion
nvme: rename and document nvme_end_request
nvme: skip noiob for zoned devices
nvme-pci: fix PRP pool size
nvme-pci: Use u32 for nvme_dev.q_depth and nvme_queue.q_depth
nvme: Use spin_lock_irq() when taking the ctrl->lock
nvmet: call blk_mq_free_request() directly
nvmet: fix oops in pt cmd execution
nvmet: add ns tear down label for pt-cmd handling
nvme: multipath: round-robin: eliminate "fallback" variable
nvme: multipath: round-robin: fix single non-optimized path case
nvme-fc: Fix wrong return value in __nvme_fc_init_request()
nvmet-passthru: Reject commands with non-sgl flags set
nvmet: fix a memory leak
blkcg: fix memleak for iolatency
MAINTAINERS: Add missing header files to BLOCK LAYER section
...
In case of block device backend, if the backend supports write zeros, the
loop device will set queue flag of QUEUE_FLAG_DISCARD. However,
limits.discard_granularity isn't setup, and this way is wrong,
see the following description in Documentation/ABI/testing/sysfs-block:
A discard_granularity of 0 means that the device does not support
discard functionality.
Especially 9b15d109a6 ("block: improve discard bio alignment in
__blkdev_issue_discard()") starts to take q->limits.discard_granularity
for computing max discard sectors. And zero discard granularity may cause
kernel oops, or fail discard request even though the loop queue claims
discard support via QUEUE_FLAG_DISCARD.
Fix the issue by setup discard granularity and alignment.
Fixes: c52abf5630 ("loop: Better discard support for block devices")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Coly Li <colyli@suse.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Xiao Ni <xni@redhat.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Evan Green <evgreen@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When LOOP_CONFIGURE is used with LO_FLAGS_PARTSCAN we need to propagate
this into the GENHD_FL_NO_PART_SCAN. LOOP_SETSTATUS does this,
LOOP_CONFIGURE doesn't so far. Effect is that setting up a loopback
device with partition scanning doesn't actually work when LOOP_CONFIGURE
is issued, though it works fine with LOOP_SETSTATUS.
Let's correct that and propagate the flag in LOOP_CONFIGURE too.
Fixes: 3448914e8cc5("loop: Add LOOP_CONFIGURE ioctl")
Signed-off-by: Lennart Poettering <lennart@poettering.net>
Acked-by: Martijn Coenen <maco@android.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The arcane magic in bd_start_claiming is only needed to be able to claim
a block_device that hasn't been fully set up. Switch the loop driver
that claims from the ioctl path with a fully set up struct block_device
to just use the much simpler bd_prepare_to_claim directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Be pedantic on removal as well and hold the mutex.
This should prevent uses of addition while we exit.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the call to blk_should_fake_timeout out of blk_mq_complete_request
and into the drivers, skipping call sites that are obvious error
handlers, and remove the now superflous blk_mq_force_complete_rq helper.
This ensures we don't keep injecting errors into completions that just
terminate the Linux request after the hardware has been reset or the
command has been aborted.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a filesystem is mounted on a loop device and on a loop ioctl
LOOP_SET_STATUS64, because of kill_bdev, buffer_head mappings are getting
destroyed.
kill_bdev
truncate_inode_pages
truncate_inode_pages_range
do_invalidatepage
block_invalidatepage
discard_buffer -->clear BH_Mapped flag
sb_bread
__bread_gfp
bh = __getblk_gfp
-->discard_buffer clear BH_Mapped flag
__bread_slow
submit_bh
submit_bh_wbc
BUG_ON(!buffer_mapped(bh)) --> hit this BUG_ON
Fixes: 5db470e229 ("loop: drop caches if offset or block_size are changed")
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
