Commit Graph

174 Commits

Author SHA1 Message Date
Jiri Pirko
78a2f5e6c1 devlink: fix port new reply cmd type
Due to a c&p error, port new reply fills-up cmd with wrong value,
any other existing port command replies and notifications.

Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW.

Skimmed through devlink userspace implementations, none of them cares
about this cmd value.

Reported-by: Chenyuan Yang <chenyuan0y@gmail.com>
Closes: https://lore.kernel.org/all/ZfZcDxGV3tSy4qsV@cy-server/
Fixes: cd76dcd68d ("devlink: Support add and delete devlink port")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20240318091908.2736542-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-19 19:37:57 -07:00
Shay Drory
d7d7512496 devlink: Fix devlink parallel commands processing
Commit 870c7ad4a5 ("devlink: protect devlink->dev by the instance
lock") added devlink instance locking inside a loop that iterates over
all the registered devlink instances on the machine in the pre-doit
phase. This can lead to serialization of devlink commands over
different devlink instances.

For example: While the first devlink instance is executing firmware
flash, all commands to other devlink instances on the machine are
forced to wait until the first devlink finishes.

Therefore, in the pre-doit phase, take the devlink instance lock only
for the devlink instance the command is targeting. Devlink layer is
taking a reference on the devlink instance, ensuring the devlink->dev
pointer is valid. This reference taking was introduced by commit
a380687200 ("devlink: take device reference for devlink object").
Without this commit, it would not be safe to access devlink->dev
lockless.

Fixes: 870c7ad4a5 ("devlink: protect devlink->dev by the instance lock")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-13 08:31:40 +00:00
William Tu
8f4cd89bf1 devlink: Fix length of eswitch inline-mode
Set eswitch inline-mode to be u8, not u16. Otherwise, errors below

$ devlink dev eswitch set pci/0000:08:00.0 mode switchdev \
  inline-mode network
    Error: Attribute failed policy validation.
    kernel answers: Numerical result out of rang
    netlink: 'devlink': attribute type 26 has an invalid length.

Fixes: f2f9dd164d ("netlink: specs: devlink: add the remaining command to generate complete split_ops")
Signed-off-by: William Tu <witu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240310164547.35219-1-witu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-11 13:13:53 -07:00
Jiri Pirko
61c43780e9 devlink: fix port dump cmd type
Unlike other commands, due to a c&p error, port dump fills-up cmd with
wrong value, different from port-get request cmd, port-get doit reply
and port notification.

Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW.

Skimmed through devlink userspace implementations, none of them cares
about this cmd value. Only ynl, for which, this is actually a fix, as it
expects doit and dumpit ops rsp_value to be the same.

Omit the fixes tag, even thought this is fix, better to target this for
next release.

Fixes: bfcd3a4661 ("Introduce devlink infrastructure")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240220075245.75416-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21 17:11:04 -08:00
Vasiliy Kovalev
def689fc26 devlink: fix possible use-after-free and memory leaks in devlink_init()
The pernet operations structure for the subsystem must be registered
before registering the generic netlink family.

Make an unregister in case of unsuccessful registration.

Fixes: 687125b579 ("devlink: split out core code")
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://lore.kernel.org/r/20240215203400.29976-1-kovalev@altlinux.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-20 10:17:46 +01:00
Jiri Pirko
58086721b7 devlink: avoid potential loop in devlink_rel_nested_in_notify_work()
In case devlink_rel_nested_in_notify_work() can not take the devlink
lock mutex. Convert the work to delayed work and in case of reschedule
do it jiffie later and avoid potential looping.

Suggested-by: Paolo Abeni <pabeni@redhat.com>
Fixes: c137743bce ("devlink: introduce object and nested devlink relationship infra")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240205171114.338679-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-06 18:45:16 -08:00
Parav Pandit
1a89e24f8b devlink: Fix referring to hw_addr attribute during state validation
When port function state change is requested, and when the driver
does not support it, it refers to the hw address attribute instead
of state attribute. Seems like a copy paste error.

Fix it by referring to the port function state attribute.

Fixes: c0bea69d1c ("devlink: Validate port function request")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129191059.129030-1-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-30 18:32:41 -08:00
Jiri Pirko
ded6f77c05 devlink: extend multicast filtering by port index
Expose the previously introduced notification multicast messages
filtering infrastructure and allow the user to select messages using
port index.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-19 15:31:40 +01:00
Jiri Pirko
13b127d257 devlink: add a command to set notification filter and use it for multicasts
Currently the user listening on a socket for devlink notifications
gets always all messages for all existing instances, even if he is
interested only in one of those. That may cause unnecessary overhead
on setups with thousands of instances present.

User is currently able to narrow down the devlink objects replies
to dump commands by specifying select attributes.

Allow similar approach for notifications. Introduce a new devlink
NOTIFY_FILTER_SET which the user passes the select attributes. Store
these per-socket and use them for filtering messages
during multicast send.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-19 15:31:40 +01:00
Jiri Pirko
5648de0b1f devlink: introduce a helper for netlink multicast send
Introduce a helper devlink_nl_notify_send() so each object notification
function does not have to call genlmsg_multicast_netns() with the same
arguments.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-19 15:31:40 +01:00
Jiri Pirko
cddbff470e devlink: send notifications only if there are listeners
Introduce devlink_nl_notify_need() helper and using it to check at the
beginning of notification functions to avoid overhead of composing
notification messages in case nobody listens.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-19 15:31:40 +01:00
Jiri Pirko
11280ddeae devlink: introduce __devl_is_registered() helper and use it instead of xa_get_mark()
Introduce __devl_is_registered() which does not assert on devlink
instance lock and use it in notifications which may be called
without devlink instance lock held.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-19 15:31:40 +01:00
Jiri Pirko
337ad364c4 devlink: use devl_is_registered() helper instead xa_get_mark()
Instead of checking the xarray mark directly using xa_get_mark() helper
use devl_is_registered() helper which wraps it up. Note that there are
couple more users of xa_get_mark() left which are going to be handled
by the next patch.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-19 15:31:40 +01:00
Jiri Pirko
9b2348e2d6 devlink: warn about existing entities during reload-reinit
During reload-reinit, all entities except for params, resources, regions
and health reporter should be removed and re-added. Add a warning to
be triggered in case the driver behaves differently.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-30 12:31:23 +01:00
Ido Schimmel
527a07e176 devlink: Add device lock assert in reload operation
Add an assert to verify that the device lock is always held throughout
reload operations.

Tested the following flows with netdevsim and mlxsw while lockdep is
enabled:

netdevsim:

 # echo "10 1" > /sys/bus/netdevsim/new_device
 # devlink dev reload netdevsim/netdevsim10
 # ip netns add bla
 # devlink dev reload netdevsim/netdevsim10 netns bla
 # ip netns del bla
 # echo 10 > /sys/bus/netdevsim/del_device

mlxsw:

 # devlink dev reload pci/0000:01:00.0
 # ip netns add bla
 # devlink dev reload pci/0000:01:00.0 netns bla
 # ip netns del bla
 # echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/remove
 # echo 1 > /sys/bus/pci/rescan

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-18 17:38:50 +00:00
Ido Schimmel
bf6b200bc8 devlink: Acquire device lock during reload command
Device drivers register with devlink from their probe routines (under
the device lock) by acquiring the devlink instance lock and calling
devl_register().

Drivers that support a devlink reload usually implement the
reload_{down, up}() operations in a similar fashion to their remove and
probe routines, respectively.

However, while the remove and probe routines are invoked with the device
lock held, the reload operations are only invoked with the devlink
instance lock held. It is therefore impossible for drivers to acquire
the device lock from their reload operations, as this would result in
lock inversion.

The motivating use case for invoking the reload operations with the
device lock held is in mlxsw which needs to trigger a PCI reset as part
of the reload. The driver cannot call pci_reset_function() as this
function acquires the device lock. Instead, it needs to call
__pci_reset_function_locked which expects the device lock to be held.

To that end, adjust devlink to always acquire the device lock before the
devlink instance lock when performing a reload.

Do that when reload is explicitly triggered by user space by specifying
the 'DEVLINK_NL_FLAG_NEED_DEV_LOCK' flag in the pre_doit and post_doit
operations of the reload command.

A previous patch already handled the case where reload is invoked as
part of netns dismantle.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-18 17:38:50 +00:00
Ido Schimmel
d32c38256d devlink: Allow taking device lock in pre_doit operations
Introduce a new private flag ('DEVLINK_NL_FLAG_NEED_DEV_LOCK') to allow
netlink commands to specify that they need to acquire the device lock in
their pre_doit operation and release it in their post_doit operation.

The reload command will use this flag in the subsequent patch.

No functional changes intended.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-18 17:38:50 +00:00
Ido Schimmel
c8d0a7d615 devlink: Enable the use of private flags in post_doit operations
Currently, private flags (e.g., 'DEVLINK_NL_FLAG_NEED_PORT') are only
used in pre_doit operations, but a subsequent patch will need to
conditionally lock and unlock the device lock in pre and post doit
operations, respectively.

As a preparation, enable the use of private flags in post_doit
operations in a similar fashion to how it is done for pre_doit
operations.

No functional changes intended.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-18 17:38:50 +00:00
Ido Schimmel
e21c52d781 devlink: Acquire device lock during netns dismantle
Device drivers register with devlink from their probe routines (under
the device lock) by acquiring the devlink instance lock and calling
devl_register().

Drivers that support a devlink reload usually implement the
reload_{down, up}() operations in a similar fashion to their remove and
probe routines, respectively.

However, while the remove and probe routines are invoked with the device
lock held, the reload operations are only invoked with the devlink
instance lock held. It is therefore impossible for drivers to acquire
the device lock from their reload operations, as this would result in
lock inversion.

The motivating use case for invoking the reload operations with the
device lock held is in mlxsw which needs to trigger a PCI reset as part
of the reload. The driver cannot call pci_reset_function() as this
function acquires the device lock. Instead, it needs to call
__pci_reset_function_locked which expects the device lock to be held.

To that end, adjust devlink to always acquire the device lock before the
devlink instance lock when performing a reload.

For now, only do that when reload is triggered as part of netns
dismantle. Subsequent patches will handle the case where reload is
explicitly triggered by user space.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-18 17:38:50 +00:00
Ido Schimmel
526dd6d787 devlink: Move private netlink flags to C file
The flags are not used outside of the C file so move them there.

Suggested-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-18 17:38:50 +00:00
Jiri Pirko
05f0431bb9 netlink: specs: devlink: add forgotten port function caps enum values
Add two enum values that the blamed commit omitted.

Fixes: f2f9dd164d ("netlink: specs: devlink: add the remaining command to generate complete split_ops")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231030161750.110420-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-01 22:13:43 -07:00
Jiri Pirko
cebe730607 devlink: remove netlink small_ops
All commands are now covered by generated split_ops. Remove the
small_ops entirely alongside with unified devlink netlink policy array.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231021112711.660606-11-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 16:16:51 -07:00
Jiri Pirko
15c80e7a53 devlink: remove duplicated netlink callback prototypes
The prototypes are now generated, remove the old ones.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231021112711.660606-10-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 16:16:51 -07:00
Jiri Pirko
f2f9dd164d netlink: specs: devlink: add the remaining command to generate complete split_ops
Currently, some of the commands are not described in devlink yaml file
and are manually filled in net/devlink/netlink.c in small_ops. To make
all part of split_ops, add definitions of the rest of the commands
alongside with needed attributes and enums.

Note that this focuses on the kernel side. The requests are fully
described in order to generate split_op alongside with policies.
Follow-up will describe the replies in order to make the userspace
helpers complete.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231021112711.660606-9-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 16:16:32 -07:00
Jiri Pirko
53590934ba devlink: rename netlink callback to be aligned with the generated ones
All remaining doit and dumpit netlink callback functions are going to be
used by generated split ops. They expect certain name format. Rename the
callback to be aligned with generated names.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231021112711.660606-8-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 16:12:47 -07:00
Przemek Kitszel
0050629cd3 devlink: convert most of devlink_fmsg_*() to return void
Since struct devlink_fmsg retains error by now (see 1st patch of this
series), there is no longer need to keep returning it in each call.

This is a separate commit to allow per-driver conversion to stop using
those return values.

Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-20 11:34:51 +01:00
Przemek Kitszel
db80d3b255 devlink: retain error in struct devlink_fmsg
Retain error value in struct devlink_fmsg, to relieve drivers from
checking it after each call.
Note that fmsg is an in-memory builder/buffer of formatted message,
so it's not the case that half baked message was sent somewhere.

We could find following scheme in multiple drivers:
  err = devlink_fmsg_obj_nest_start(fmsg);
  if (err)
  	return err;
  err = devlink_fmsg_string_pair_put(fmsg, "src", src);
  if (err)
  	return err;
  err = devlink_fmsg_something(fmsg, foo, bar);
  if (err)
	return err;
  // and so on...
  err = devlink_fmsg_obj_nest_end(fmsg);

With retaining error API that translates to:
  devlink_fmsg_obj_nest_start(fmsg);
  devlink_fmsg_string_pair_put(fmsg, "src", src);
  devlink_fmsg_something(fmsg, foo, bar);
  // and so on...
  devlink_fmsg_obj_nest_end(fmsg);

What means we check error just when is time to send.

Possible error scenarios are developer error (API misuse) and memory
exhaustion, both cases are good candidates to choose readability
over fastest possible exit.

Note that this patch keeps returning errors, to allow per-driver conversion
to the new API, but those are not needed at this point already.

This commit itself is an illustration of benefits for the dev-user,
more of it will be in separate commits of the series.

Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-20 11:34:49 +01:00
Jiri Pirko
5d77371e8c devlink: document devlink_rel_nested_in_notify() function
Add a documentation for devlink_rel_nested_in_notify() describing the
devlink instance locking consequences.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-18 09:23:01 +01:00
Jiri Pirko
b5f4e37133 devlink: don't take instance lock for nested handle put
Lockdep reports following issue:

WARNING: possible circular locking dependency detected
------------------------------------------------------
devlink/8191 is trying to acquire lock:
ffff88813f32c250 (&devlink->lock_key#14){+.+.}-{3:3}, at: devlink_rel_devlink_handle_put+0x11e/0x2d0

                           but task is already holding lock:
ffffffff8511eca8 (rtnl_mutex){+.+.}-{3:3}, at: unregister_netdev+0xe/0x20

                           which lock already depends on the new lock.

                           the existing dependency chain (in reverse order) is:

                           -> #3 (rtnl_mutex){+.+.}-{3:3}:
       lock_acquire+0x1c3/0x500
       __mutex_lock+0x14c/0x1b20
       register_netdevice_notifier_net+0x13/0x30
       mlx5_lag_add_mdev+0x51c/0xa00 [mlx5_core]
       mlx5_load+0x222/0xc70 [mlx5_core]
       mlx5_init_one_devl_locked+0x4a0/0x1310 [mlx5_core]
       mlx5_init_one+0x3b/0x60 [mlx5_core]
       probe_one+0x786/0xd00 [mlx5_core]
       local_pci_probe+0xd7/0x180
       pci_device_probe+0x231/0x720
       really_probe+0x1e4/0xb60
       __driver_probe_device+0x261/0x470
       driver_probe_device+0x49/0x130
       __driver_attach+0x215/0x4c0
       bus_for_each_dev+0xf0/0x170
       bus_add_driver+0x21d/0x590
       driver_register+0x133/0x460
       vdpa_match_remove+0x89/0xc0 [vdpa]
       do_one_initcall+0xc4/0x360
       do_init_module+0x22d/0x760
       load_module+0x51d7/0x6750
       init_module_from_file+0xd2/0x130
       idempotent_init_module+0x326/0x5a0
       __x64_sys_finit_module+0xc1/0x130
       do_syscall_64+0x3d/0x90
       entry_SYSCALL_64_after_hwframe+0x46/0xb0

                           -> #2 (mlx5_intf_mutex){+.+.}-{3:3}:
       lock_acquire+0x1c3/0x500
       __mutex_lock+0x14c/0x1b20
       mlx5_register_device+0x3e/0xd0 [mlx5_core]
       mlx5_init_one_devl_locked+0x8fa/0x1310 [mlx5_core]
       mlx5_devlink_reload_up+0x147/0x170 [mlx5_core]
       devlink_reload+0x203/0x380
       devlink_nl_cmd_reload+0xb84/0x10e0
       genl_family_rcv_msg_doit+0x1cc/0x2a0
       genl_rcv_msg+0x3c9/0x670
       netlink_rcv_skb+0x12c/0x360
       genl_rcv+0x24/0x40
       netlink_unicast+0x435/0x6f0
       netlink_sendmsg+0x7a0/0xc70
       sock_sendmsg+0xc5/0x190
       __sys_sendto+0x1c8/0x290
       __x64_sys_sendto+0xdc/0x1b0
       do_syscall_64+0x3d/0x90
       entry_SYSCALL_64_after_hwframe+0x46/0xb0

                           -> #1 (&dev->lock_key#8){+.+.}-{3:3}:
       lock_acquire+0x1c3/0x500
       __mutex_lock+0x14c/0x1b20
       mlx5_init_one_devl_locked+0x45/0x1310 [mlx5_core]
       mlx5_devlink_reload_up+0x147/0x170 [mlx5_core]
       devlink_reload+0x203/0x380
       devlink_nl_cmd_reload+0xb84/0x10e0
       genl_family_rcv_msg_doit+0x1cc/0x2a0
       genl_rcv_msg+0x3c9/0x670
       netlink_rcv_skb+0x12c/0x360
       genl_rcv+0x24/0x40
       netlink_unicast+0x435/0x6f0
       netlink_sendmsg+0x7a0/0xc70
       sock_sendmsg+0xc5/0x190
       __sys_sendto+0x1c8/0x290
       __x64_sys_sendto+0xdc/0x1b0
       do_syscall_64+0x3d/0x90
       entry_SYSCALL_64_after_hwframe+0x46/0xb0

                           -> #0 (&devlink->lock_key#14){+.+.}-{3:3}:
       check_prev_add+0x1af/0x2300
       __lock_acquire+0x31d7/0x4eb0
       lock_acquire+0x1c3/0x500
       __mutex_lock+0x14c/0x1b20
       devlink_rel_devlink_handle_put+0x11e/0x2d0
       devlink_nl_port_fill+0xddf/0x1b00
       devlink_port_notify+0xb5/0x220
       __devlink_port_type_set+0x151/0x510
       devlink_port_netdevice_event+0x17c/0x220
       notifier_call_chain+0x97/0x240
       unregister_netdevice_many_notify+0x876/0x1790
       unregister_netdevice_queue+0x274/0x350
       unregister_netdev+0x18/0x20
       mlx5e_vport_rep_unload+0xc5/0x1c0 [mlx5_core]
       __esw_offloads_unload_rep+0xd8/0x130 [mlx5_core]
       mlx5_esw_offloads_rep_unload+0x52/0x70 [mlx5_core]
       mlx5_esw_offloads_unload_rep+0x85/0xc0 [mlx5_core]
       mlx5_eswitch_unload_sf_vport+0x41/0x90 [mlx5_core]
       mlx5_devlink_sf_port_del+0x120/0x280 [mlx5_core]
       genl_family_rcv_msg_doit+0x1cc/0x2a0
       genl_rcv_msg+0x3c9/0x670
       netlink_rcv_skb+0x12c/0x360
       genl_rcv+0x24/0x40
       netlink_unicast+0x435/0x6f0
       netlink_sendmsg+0x7a0/0xc70
       sock_sendmsg+0xc5/0x190
       __sys_sendto+0x1c8/0x290
       __x64_sys_sendto+0xdc/0x1b0
       do_syscall_64+0x3d/0x90
       entry_SYSCALL_64_after_hwframe+0x46/0xb0

                           other info that might help us debug this:

Chain exists of:
                             &devlink->lock_key#14 --> mlx5_intf_mutex --> rtnl_mutex

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(rtnl_mutex);
                               lock(mlx5_intf_mutex);
                               lock(rtnl_mutex);
  lock(&devlink->lock_key#14);

Problem is taking the devlink instance lock of nested instance when RTNL
is already held.

To fix this, don't take the devlink instance lock when putting nested
handle. Instead, rely on the preparations done by previous two patches
to be able to access device pointer and obtain netns id without devlink
instance lock held.

Fixes: c137743bce ("devlink: introduce object and nested devlink relationship infra")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-18 09:23:01 +01:00
Jiri Pirko
a380687200 devlink: take device reference for devlink object
In preparation to allow to access device pointer without devlink
instance lock held, make sure the device pointer is usable until
devlink_release() is called.

Fixes: c137743bce ("devlink: introduce object and nested devlink relationship infra")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-18 09:23:01 +01:00
Jiri Pirko
c503bc7df6 devlink: call peernet2id_alloc() with net pointer under RCU read lock
peernet2id_alloc() allows to be called lockless with peer net pointer
obtained in RCU critical section and makes sure to return ns ID if net
namespaces is not being removed concurrently. Benefit from
read_pnet_rcu() helper addition, use it to obtain net pointer under RCU
read lock and pass it to peernet2id_alloc() to get ns ID.

Fixes: c137743bce ("devlink: introduce object and nested devlink relationship infra")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-18 09:23:01 +01:00
Jakub Kicinski
0e6bb5b7f4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR.

No conflicts.

Adjacent changes:

kernel/bpf/verifier.c
  829955981c ("bpf: Fix verifier log for async callback return values")
  a923819fb2 ("bpf: Treat first argument as return value for bpf_throw")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-12 17:07:34 -07:00
Moshe Shemesh
aba0e909dc devlink: Hold devlink lock on health reporter dump get
Devlink health dump get callback should take devlink lock as any other
devlink callback. Otherwise, since devlink_mutex was removed, this
callback is not protected from a race of the reporter being destroyed
while handling the callback.

Add devlink lock to the callback and to any call for
devlink_health_do_dump(). This should be safe as non of the drivers dump
callback implementation takes devlink lock.

As devlink lock is added to any callback of dump, the reporter dump_lock
is now redundant and can be removed.

Fixes: d3efc2a6a6 ("net: devlink: remove devlink_mutex")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/1696510216-189379-1-git-send-email-moshe@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-06 15:56:46 -07:00
Jiri Pirko
c5e1bf8a51 devlink: introduce possibility to expose info about nested devlinks
In mlx5, there is a devlink instance created for PCI device. Also, one
separate devlink instance is created for auxiliary device that
represents the netdev of uplink port. This relation is currently
invisible to the devlink user.

Benefit from the rel infrastructure and allow for nested devlink
instance to set the relationship for the nested-in devlink instance.
Note that there may be many nested instances, therefore use xarray to
hold the list of rel_indexes for individual nested instances.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-17 14:01:47 +01:00
Jiri Pirko
9473bc0119 devlink: convert linecard nested devlink to new rel infrastructure
Benefit from the newly introduced rel infrastructure, treat the linecard
nested devlink instances in the same way as port function instances.
Convert the code to use the rel infrastructure.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-17 14:01:47 +01:00
Jiri Pirko
0b7a2721e3 devlink: expose peer SF devlink instance
Introduce a new helper devl_port_fn_devlink_set() to be used by driver
assigning a devlink instance to the peer devlink port function.

Expose this to user over new netlink attribute nested under port
function nest to expose devlink handle related to the port function.

This is particularly helpful for user to understand the relationship
between devlink instances created for SFs and the port functions
they belong to.

Note that caller of devlink_port_notify() needs to hold devlink
instance lock, put the assertion to devl_port_fn_devlink_set() to make
this requirement explicit. Also note the limitations that only allow to
make this assignment for registered objects.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-17 14:01:47 +01:00
Jiri Pirko
c137743bce devlink: introduce object and nested devlink relationship infra
It is a bit tricky to maintain relationship between devlink objects and
nested devlink instances due to following aspects:

1) Locking. It is necessary to lock the devlink instance that contains
   the object first, only after that to lock the nested instance.
2) Lifetimes. Objects (e.g devlink port) may be removed before
   the nested devlink instance.
3) Notifications. If nested instance changes (e.g. gets
   registered/unregistered) the nested-in object needs to send
   appropriate notifications.

Resolve this by introducing an xarray that holds 1:1 relationships
between devlink object and related nested devlink instance.
Use that xarray index to get the object/nested devlink instance on
the other side.

Provide necessary helpers:
devlink_rel_nested_in_add/clear() to add and clear the relationship.
devlink_rel_nested_in_notify() to call the nested-in object to send
	notifications during nested instance register/unregister/netns
	change.
devlink_rel_devlink_handle_put() to be used by nested-in object fill
	function to fill the nested handle.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-17 14:01:47 +01:00
Jiri Pirko
1c2197c47a devlink: extend devlink_nl_put_nested_handle() with attrtype arg
As the next patch is going to call this helper with need to fill another
type of nested attribute, pass it over function arg.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-17 14:01:46 +01:00
Jiri Pirko
af1f1400af devlink: move devlink_nl_put_nested_handle() into netlink.c
As the next patch is going to call this helper out of the linecard.c,
move to netlink.c.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-17 14:01:46 +01:00
Jiri Pirko
ad99637ac9 devlink: put netnsid to nested handle
If netns of devlink instance and nested devlink instance differs,
put netnsid attr to indicate that.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-17 14:01:46 +01:00
Jiri Pirko
d0b7e990f7 devlink: move linecard struct into linecard.c
Instead of exposing linecard struct, expose a simple helper to get the
linecard index, which is all is needed outside linecard.c. Move the
linecard struct to linecard.c and keep it private similar to the rest of
the devlink objects.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-17 14:01:46 +01:00
Jiri Pirko
71179ac5c2 devlink: move devlink_notify_register/unregister() to dev.c
At last, move the last bits out of leftover.c,
the devlink_notify_register/unregister() functions to dev.c

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230828061657.300667-16-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-28 08:02:24 -07:00
Jiri Pirko
29a390d177 devlink: move small_ops definition into netlink.c
Move the generic netlink small_ops definition where they are consumed,
into netlink.c

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230828061657.300667-15-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-28 08:02:23 -07:00
Jiri Pirko
890c556674 devlink: move tracepoint definitions into core.c
Move remaining tracepoint definitions to most suitable file core.c.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230828061657.300667-14-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-28 08:02:23 -07:00
Jiri Pirko
9edbe6f36c devlink: push linecard related code into separate file
Cut out another chunk from leftover.c and put linecard related code
into a separate file.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230828061657.300667-13-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-28 08:02:23 -07:00
Jiri Pirko
7cc7194e85 devlink: push rate related code into separate file
Cut out another chunk from leftover.c and put rate related code
into a separate file.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230828061657.300667-12-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-28 08:02:23 -07:00
Jiri Pirko
4bbdec80ff devlink: push trap related code into separate file
Cut out another chunk from leftover.c and put trap related code
into a separate file.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230828061657.300667-11-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-28 08:02:23 -07:00
Jiri Pirko
85facf94fd devlink: use tracepoint_enabled() helper
In preparation for the trap code move, use tracepoint_enabled() helper
instead of trace_devlink_trap_report_enabled() which would not be
defined in that scope.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230828061657.300667-10-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-28 08:02:23 -07:00
Jiri Pirko
1aa47ca1f5 devlink: push region related code into separate file
Cut out another chunk from leftover.c and put region related code
into a separate file.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230828061657.300667-9-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-28 08:02:23 -07:00
Jiri Pirko
830c41e1e9 devlink: push param related code into separate file
Cut out another chunk from leftover.c and put param related code
into a separate file.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230828061657.300667-8-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-28 08:02:22 -07:00