Secondary preemption buffer is accessible by NPU's DMA and can be
allocated with addresses above 4 GB. Move secondary preemption buffer
allocation from SHAVE range which is much smaller (2GB) to DMA range.
This allows to allocate more command queues with corresponding
preemption buffers without running out of address range.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-12-jacek.lawrynowicz@linux.intel.com
Increase DMA address range to:
* 128 GB on 37xx (due to MMU limitations)
* 256 GB on other generations
Merge User and DMA ranges on 40xx and above as it is possible
to access whole 256 GBs from both FW and DMA.
Increase User range on 37xx from 255MB to 511MB
to allow loading very large models.
Do not set global_alias_pio_base/size on other generations than 37xx
as it's only used on 37xx anyway.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-11-jacek.lawrynowicz@linux.intel.com
Add CONFIG_DRM_ACCEL_IVPU_DEBUG option that:
- Adds -DDEBUG that enables printk regardless of the kernel config
- Enables unsafe module params (that are now disabled by default)
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-10-jacek.lawrynowicz@linux.intel.com
Do not allocate preemption buffers when Mid Inference Preemption (MIP)
is disabled through test mode.
Rename IVPU_TEST_MODE_PREEMPTION_DISABLE to IVPU_TEST_MODE_MIP_DISABLE
to better describe that this test mode only disables MIP - job level
preemption will still occur.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-9-jacek.lawrynowicz@linux.intel.com
Use XArray for dynamic command queue ID allocations instead of fixed
ones. This is required by upcoming changes to UAPI that will allow to
manage command queues by user space instead of having predefined number
of queues in a context.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-8-jacek.lawrynowicz@linux.intel.com
Remove custom ivpu_id_alloc() wrapper used for ID allocations
and replace it with standard xa_alloc_cyclic() API.
The idea behind ivpu_id_alloc() was to have monotonic IDs, so the driver
is easier to debug because same IDs are not reused all over. The same
can be achieved just by using appropriate Linux API.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-7-jacek.lawrynowicz@linux.intel.com
Ensure that all buffers that were created only partially through
allocated scatter-gather table are unmapped from MMU600 in case of errors.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-6-jacek.lawrynowicz@linux.intel.com
Don't leave a context descriptor in case CFGI_ALL flush fails.
Mark it as invalid (by clearing valid bit) so nothing is left in
partially-initialized state.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-5-jacek.lawrynowicz@linux.intel.com
Copy engine was deprecated by the FW and is no longer supported.
Compute engine includes all copy engine functionality and should be used
instead.
This change does not affect user space as the copy engine was never
used outside of a couple of tests.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-4-jacek.lawrynowicz@linux.intel.com
Defer root page table allocation and unify context init/fini functions.
Move allocation of the root page table from the file_priv_open function to
perform a lazy allocation approach during ivpu_bo_pin().
By doing so, we avoid the overhead of allocating page tables for simple
operations like GET_PARAM that do not require them.
Additionally, the MMU context descriptor table initialization has been
moved to the ivpu_mmu_context_map_page function.
This change streamlines the process and ensures that the descriptor table
is only initialized when it is actually needed.
Refactor init/fini functions to remove redundant code and make the context
management more straightforward.
Overall, these changes lead to a reduction in the time taken by the file
descriptor open operation, as the costly root page table allocation is now
avoided for operations that do not require it.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-3-jacek.lawrynowicz@linux.intel.com
Allow TILE_FUSE register to disable more than 1 tile.
The driver should not prevent such configurations from being functional.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-2-jacek.lawrynowicz@linux.intel.com
The NOC firewall interrupt means that the HW prevented
unauthorized access to a protected resource, so there
is no need to trigger device reset in such case.
To facilitate security testing add firewall_irq_counter
debugfs file that tracks firewall interrupts.
Fixes: 8a27ad81f7 ("accel/ivpu: Split IP and buttress code")
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017144958.79327-1-jacek.lawrynowicz@linux.intel.com
The Sahara protocol has a crashdump functionality. In the hello
exchange, the device can advertise it has a memory dump available for
the host to collect. Instead of the device making requests of the host,
the host requests data from the device which can be later analyzed.
Implement this functionality and utilize the devcoredump framework for
handing the dump over to userspace.
Similar to how firmware loading in Sahara involves multiple files,
crashdump can consist of multiple files for different parts of the dump.
Structure these into a single buffer that userspace can parse and
extract the original files from.
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021200355.544126-1-quic_jhugo@quicinc.com
Recently I noticed that both gcc-14 and clang-18 report that passing
a non-string literal as the format argument of alloc_workqueue()
is potentially insecure.
E.g. clang-18 says:
.../qaic_drv.c:61:23: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
61 | wq = alloc_workqueue(fmt, WQ_UNBOUND, 0);
| ^~~
.../qaic_drv.c:61:23: note: treat the string as an argument to avoid this
61 | wq = alloc_workqueue(fmt, WQ_UNBOUND, 0);
| ^
| "%s",
It is always the case where the contents of fmt is safe to pass as the
format argument. That is, in my understanding, it never contains any
format escape sequences.
But, it seems better to be safe than sorry. And, as a bonus, compiler
output becomes less verbose by addressing this issue as suggested by
clang-18.
Also, change the name of the parameter of qaicm_wq_init from
fmt to name to better reflect it's purpose.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241011-string-thing-v1-3-acc506568033@kernel.org
Only for_each_sgtable_dma_sg() should be used to walk through a SG table
to grab correct bus address and length pair after calling DMA MAP API on
a SG table as DMA MAP APIs updates the SG table and for_each_sgtable_sg()
walks through the original SG table.
Fixes: ff13be8303 ("accel/qaic: Add datapath")
Fixes: 129776ac2e ("accel/qaic: Add control path")
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193252.3888544-1-quic_jhugo@quicinc.com
Add basic support for the new AIC080 product. The PCIe Device ID is
0xa080. AIC080 is a lower cost, lower performance SKU variant of AIC100.
From the qaic perspective, it is the same as AIC100.
Reviewed-by: Troy Hanson <quic_thanson@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004195209.3910996-1-quic_jhugo@quicinc.com
The ipc_router channel allows AF_QIPCRTR clients and services to
communicate with the AIC100 device. The ipc_router MHI transport layer
expects the channel to be named exactly "IPCR".
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004164033.3825986-1-quic_jhugo@quicinc.com
Apply Hardware Architecture Specification compatible delays
for main island power delivery for 50xx and above.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004162505.1695605-3-maciej.falkowski@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Add support for the 5th generation of Intel NPU that
is going to be present in PTL_P (Panther Lake) CPUs.
NPU5 code reuses almost all of previous driver code.
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004162505.1695605-2-maciej.falkowski@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Do not restrict range for preemption buffers allocation just to the end
of user and shave ranges, use them whole instead to avoid situation
where end of range might be already allocated causing preemption buffers
allocation to fail.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-27-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Allow to proceed with job command queue creation even if preemption
buffers failed to be allocated, print warning that preemption on such
command queue will be disabled.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-26-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Warn in ivpu_file_priv_put() checks a pointer that is previously
accessed. Warn in ivpu_ipc_fini() can be triggered even in valid cases
where IPC is disabled upon closing the device.
Reviewed-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-25-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Move diagnostic functions to common error handling within ivpu_boot()
function to ensure diagnostics are gathered even in cases where NPU
fails after successful boot (DCT and HWS init failures).
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-24-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Refactor IPC send and receive functions to allow correct
handling of operations that should not trigger a recovery process.
Expose ivpu_send_receive_internal(), which is now utilized by the D0i3
entry, DCT initialization, and HWS initialization functions.
These functions have been modified to return error codes gracefully,
rather than initiating recovery.
The updated functions are invoked within ivpu_probe() and ivpu_resume(),
ensuring that any errors encountered during these stages result in a proper
teardown or shutdown sequence. The previous approach of triggering recovery
within these functions could lead to a race condition, potentially causing
undefined behavior and kernel crashes due to null pointer dereferences.
Fixes: 45e45362e0 ("accel/ivpu: Introduce ivpu_ipc_send_receive_active()")
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-23-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
The current reset_engine implementation unconditionally resets
all engines. Improve implementation to reset only the engine
requested by the user space to allow more granular testing.
Also use DEFINE_DEBUGFS_ATTRIBUTE() to simplify implementation.
Same changes applied to resume_engine debugfs file for consistency.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-22-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
With recent Simics model update CLOCK_RESOURCE_OWN_ACK signal
was implemented as part of VPU STATUS register and workaround
is no longer needed.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-21-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Add new test_mode BIT(9) that forces firmware to
enable turbo burst mode.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-20-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Save last used ID and use it to limit the possible values
for the ID. This should decrease the rate at which the IDs
are reused, which will make debugging easier.
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-19-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Change debug message to error level in case of receiving
non-successful result of JSM message.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-18-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Add one jiffy to ensure wait function never times out before
intended timeout value, which could happen if absolute timeout value
is less than (1s / CONFIG_HZ) in the future.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-16-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Make the dvfs_mode read-write to allow checking current mode.
Simplify the dvfs_mode implementation with the DEFINE_DEBUGFS_ATTRIBUTE.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-15-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Previously Simics was not providing workpoint for configurations
with 0 tiles enabled, that had to be worked around in the KMD.
This got fixed in Simics and workaround is no longer needed.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-14-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Hardcoded driver date is useless, so use kernel version as a driver date
to make identifying .ko file easier. Also allow to pass DRIVER_DATE
on build time to allow versioning the driver in case it is built out
of the tree.
Reviewed-by: Karol Wachowski <karol.wachowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-13-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
With recent Simics update DVFS flows using cdyn were fixed
and it is possible to enable D0i3/D3 entry flows on autosuspend.
Set autosuspend timeout to 100 ms by default on Simics.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-11-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Follow HW documentation recommendation of 500 ns delay between setting
AON_PWR_ISLAND_TRICKLE_EN and AON_PWR_ISLAND_EN registers during power
island enabling. Previously this was only done correctly for VPU 4+.
VPU 3.7 had the delay added after power island disable where it is not
needed.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-10-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Send JSM state dump message at the beginning of TDR handler. This allows
FW to collect debug info in the FW log before the state of the NPU is
lost allowing to analyze the cause of a TDR.
Wait a predefined timeout (10 ms) so the FW has a chance to write debug
logs. We cannot wait for JSM response at this point because IRQs are
already disabled before TDR handler is invoked.
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-9-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Use coredump (if available) to collect FW logs in case of a FW crash.
This makes dmesg more readable and allows to collect more log data.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-8-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
- Fix empty log detection that couldn't work without read_wrap_count
- Start printing wrapped log from correct position (log_start)
- Properly handle logs that are wrapped multiple times in reference
to reader position
- Don't add a newline when log buffer is wrapped
- Always add a newline after printing a log buffer in case log does
not end with one
Reviewed-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-6-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Add ivpu_fw_log_reset() that resets the read_index of all FW logs
on cold boot so logs are properly read.
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-4-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
