If a driver raises a connection error before the connection is bound, we
can leave a cleanup_work queued that can later run and disconnect/stop a
connection that is logged in. The problem is that drivers can call
iscsi_conn_error_event for endpoints that are connected but not yet bound
when something like the network port they are using is brought down.
iscsi_cleanup_conn_work_fn will check for this and exit early, but if the
cleanup_work is stuck behind other works, it might not get run until after
userspace has done ep_disconnect. Because the endpoint is not yet bound
there was no way for ep_disconnect to flush the work.
The bug of leaving stop_conns queued was added in:
Commit 23d6fefbb3 ("scsi: iscsi: Fix in-kernel conn failure handling")
and:
Commit 0ab710458d ("scsi: iscsi: Perform connection failure entirely in
kernel space")
was supposed to fix it, but left this case.
This patch moves the conn state check to before we even queue the work so
we can avoid queueing.
Link: https://lore.kernel.org/r/20220408001314.5014-7-michael.christie@oracle.com
Fixes: 0ab710458d ("scsi: iscsi: Perform connection failure entirely in kernel space")
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If iscsid is doing a stop_conn at the same time the kernel is starting
error recovery we can hit a race that allows the cleanup work to run on a
valid connection. In the race, iscsi_if_stop_conn sees the cleanup bit set,
but it calls flush_work on the clean_work before iscsi_conn_error_event has
queued it. The flush then returns before the queueing and so the
cleanup_work can run later and disconnect/stop a conn while it's in a
connected state.
The patch:
Commit 0ab710458d ("scsi: iscsi: Perform connection failure entirely in
kernel space")
added the late stop_conn call bug originally, and the patch:
Commit 23d6fefbb3 ("scsi: iscsi: Fix in-kernel conn failure handling")
attempted to fix it but only fixed the normal EH case and left the above
race for the iscsid restart case. For the normal EH case we don't hit the
race because we only signal userspace to start recovery after we have done
the queueing, so the flush will always catch the queued work or see it
completed.
For iscsid restart cases like boot, we can hit the race because iscsid will
call down to the kernel before the kernel has signaled any error, so both
code paths can be running at the same time. This adds a lock around the
setting of the cleanup bit and queueing so they happen together.
Link: https://lore.kernel.org/r/20220408001314.5014-6-michael.christie@oracle.com
Fixes: 0ab710458d ("scsi: iscsi: Perform connection failure entirely in kernel space")
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch fixes a bug where when using iSCSI offload we can free an
endpoint while userspace still thinks it's active. That then causes the
endpoint ID to be reused for a new connection's endpoint while userspace
still thinks the ID is for the original connection. Userspace will then end
up disconnecting a running connection's endpoint or trying to bind to
another connection's endpoint.
This bug is a regression added in:
Commit 23d6fefbb3 ("scsi: iscsi: Fix in-kernel conn failure handling")
where we added a in kernel ep_disconnect call to fix a bug in:
Commit 0ab710458d ("scsi: iscsi: Perform connection failure entirely in
kernel space")
where we would call stop_conn without having done ep_disconnect. This early
ep_disconnect call will then free the endpoint and it's ID while userspace
still thinks the ID is valid.
Fix the early release of the ID by having the in kernel recovery code keep
a reference to the endpoint until userspace has called into the kernel to
finish cleaning up the endpoint/connection. It requires the previous commit
"scsi: iscsi: Release endpoint ID when its freed" which moved the freeing
of the ID until when the endpoint is released.
Link: https://lore.kernel.org/r/20220408001314.5014-5-michael.christie@oracle.com
Fixes: 23d6fefbb3 ("scsi: iscsi: Fix in-kernel conn failure handling")
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We can't release the endpoint ID until all references to the endpoint have
been dropped or it could be allocated while in use. This has us use an idr
instead of looping over all conns to find a free ID and then free the ID
when all references have been dropped instead of when the device is only
deleted.
Link: https://lore.kernel.org/r/20220408001314.5014-4-michael.christie@oracle.com
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When userspace restarts during boot or upgrades it won't know about the
offload driver's endpoint and connection mappings. iscsid will start by
cleaning up the old session by doing a stop_conn call. Later, if we are
able to create a new connection, we clean up the old endpoint during the
binding stage. The problem is that if we do stop_conn before doing the
ep_disconnect call offload, drivers can still be executing I/O. We then
might free tasks from the under the card/driver.
This moves the ep_disconnect call to before we do the stop_conn call for
this case. It will then work and look like a normal recovery/cleanup
procedure from the driver's point of view.
Link: https://lore.kernel.org/r/20220408001314.5014-3-michael.christie@oracle.com
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch moves iscsi_ep_disconnect() so it can be called earlier in the
next patch.
Link: https://lore.kernel.org/r/20220408001314.5014-2-michael.christie@oracle.com
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Executing driver on servers with more than 32 CPUs were faced with command
timeouts. This is because we were not geting completions for commands
submitted on IQ32 - IQ63.
Set E64Q bit to enable upper inbound and outbound queues 32 to 63 in the
MPI main configuration table.
Added 500ms delay after successful MPI initialization as mentioned in
controller datasheet.
Link: https://lore.kernel.org/r/20220411064603.668448-3-Ajish.Koshy@microchip.com
Fixes: 05c6c029a4 ("scsi: pm80xx: Increase number of supported queues")
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When upper inbound and outbound queues 32-63 are enabled, we see upper
vectors 32-63 in interrupt service routine. We need corresponding registers
to handle masking and unmasking of these upper interrupts.
To achieve this, we use registers MSGU_ODMR_U(0x34) to mask and
MSGU_ODMR_CLR_U(0x3C) to unmask the interrupts. In these registers bit 0-31
represents interrupt vectors 32-63.
Link: https://lore.kernel.org/r/20220411064603.668448-2-Ajish.Koshy@microchip.com
Fixes: 05c6c029a4 ("scsi: pm80xx: Increase number of supported queues")
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Revert the patch mentioned in the subject since it blocks I/O after module
unload has started while this is a legitimate use case. For e.g. blktests
test case srp/001 that patch causes a command timeout to be triggered for
the following call stack:
__schedule+0x4c3/0xd20
schedule+0x82/0x110
schedule_timeout+0x122/0x200
io_schedule_timeout+0x7b/0xc0
__wait_for_common+0x2bc/0x380
wait_for_completion_io_timeout+0x1d/0x20
blk_execute_rq+0x1db/0x200
__scsi_execute+0x1fb/0x310
sd_sync_cache+0x155/0x2c0 [sd_mod]
sd_shutdown+0xbb/0x190 [sd_mod]
sd_remove+0x5b/0x80 [sd_mod]
device_remove+0x9a/0xb0
device_release_driver_internal+0x2c5/0x360
device_release_driver+0x12/0x20
bus_remove_device+0x1aa/0x270
device_del+0x2d4/0x640
__scsi_remove_device+0x168/0x1a0
scsi_forget_host+0xa8/0xb0
scsi_remove_host+0x9b/0x150
sdebug_driver_remove+0x3d/0x140 [scsi_debug]
device_remove+0x6f/0xb0
device_release_driver_internal+0x2c5/0x360
device_release_driver+0x12/0x20
bus_remove_device+0x1aa/0x270
device_del+0x2d4/0x640
device_unregister+0x18/0x70
sdebug_do_remove_host+0x138/0x180 [scsi_debug]
scsi_debug_exit+0x45/0xd5 [scsi_debug]
__do_sys_delete_module.constprop.0+0x210/0x320
__x64_sys_delete_module+0x1f/0x30
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Link: https://lore.kernel.org/r/20220409043704.28573-1-bvanassche@acm.org
Fixes: 2aad3cd853 ("scsi: scsi_debug: Address races following module load")
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Yi Zhang <yi.zhang@redhat.com>
Cc: Bob Pearson <rpearsonhpe@gmail.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When building with CONFIG_PM=y and CONFIG_PM_SLEEP=n (such as ARCH=riscv
allmodconfig), the following warnings/errors occur:
drivers/gpu/drm/msm/adreno/adreno_device.c:679:12: error: 'adreno_system_resume' defined but not used [-Werror=unused-function]
679 | static int adreno_system_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/adreno/adreno_device.c:655:12: error: 'adreno_system_suspend' defined but not used [-Werror=unused-function]
655 | static int adreno_system_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
These functions are only used in SET_SYSTEM_SLEEP_PM_OPS(), which
evaluates to empty when CONFIG_PM_SLEEP is not set, making these
functions unused.
To resolve this, use the SYSTEM_SLEEP_PM_OPS() and RUNTIME_PM_OPS()
macros, which were introduced in commit 1a3c7bb088 ("PM: core: Add new
*_PM_OPS macros, deprecate old ones"). They are designed to avoid these
compiler warnings while still guarding their use on
CONFIG_PM{,_SLEEP}=y.
Fixes: 7e4167c9e0 ("drm/msm/gpu: Park scheduler threads for system suspend")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220411181249.2758344-1-nathan@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-04-08
Alexander fixes a use after free issue with aRFS for ice driver.
Mateusz reverts a commit that introduced issues related to device
resets for iavf driver.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
Revert "iavf: Fix deadlock occurrence during resetting VF interface"
ice: arfs: fix use-after-free when freeing @rx_cpu_rmap
====================
Link: https://lore.kernel.org/r/20220408163411.2415552-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Karsten Graul says:
====================
net/smc: fixes 2022-04-08
Patch 1 fixes two usages of snprintf() with non null-terminated
string which results into an out-of-bounds read.
Pach 2 fixes a syzbot finding where a pointer check was missed
before the call to dev_name().
Patch 3 fixes a crash when already released memory is used as
a function pointer.
====================
Link: https://lore.kernel.org/r/20220408151035.1044701-1-kgraul@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Child sockets may inherit the af_ops from the parent listen socket.
When the listen socket is released then the af_ops of the child socket
points to released memory.
Solve that by restoring the original af_ops for child sockets which
inherited the parent af_ops. And clear any inherited user_data of the
parent socket.
Fixes: 8270d9c210 ("net/smc: Limit backlog connections")
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dev_name() was called with dev.parent as argument but without to
NULL-check it before.
Solve this by checking the pointer before the call to dev_name().
Fixes: af5f60c7e3 ("net/smc: allow PCI IDs as ib device names in the pnet table")
Reported-by: syzbot+03e3e228510223dabd34@syzkaller.appspotmail.com
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using snprintf() to convert not null-terminated strings to null
terminated strings may cause out of bounds read in the source string.
Therefore use memcpy() and terminate the target string with a null
afterwards.
Fixes: fa08666255 ("net/smc: add support for user defined EIDs")
Fixes: 3c572145c2 ("net/smc: add generic netlink support for system EID")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function is not generally applicable enough to be included in the core
kernel header. Move it to block since it's the only subsystem using it.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20220327173316.315-1-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit 4298388574 ("net: macb: restart tx after tx used bit read")
added support for restarting transmission. Restarting tx does not work
in case controller asserts TXUBR interrupt and TQBP is already at the end
of the tx queue. In that situation, restarting tx will immediately cause
assertion of another TXUBR interrupt. The driver will end up in an infinite
interrupt loop which it cannot break out of.
For cases where TQBP is at the end of the tx queue, instead
only clear TX_USED interrupt. As more data gets pushed to the queue,
transmission will resume.
This issue was observed on a Xilinx Zynq-7000 based board.
During stress test of the network interface,
driver would get stuck on interrupt loop within seconds or minutes
causing CPU to stall.
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220407161659.14532-1-tomas.melin@vaisala.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are two reasons why this isn't the best idea:
- It's an odd area to grab a bit of storage space, hence it's an odd area
to grab storage from.
- It puts the 3rd io_kiocb cacheline into the hot path, where normal hot
path just needs the first two.
Use 'cflags' for joint fd/cflags storage. We only need fd until we
successfully issue, and we only need cflags once a request is done and is
completed.
Fixes: 6bf9c47a39 ("io_uring: defer file assignment")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for fixing a regression with pulling in an extra cacheline
for IO that doesn't usually touch the last cacheline of the io_kiocb,
move the cached location of apoll->events to space shared with some other
completion data. Like cflags, this isn't used until after the request
has been completed, so we can piggy back on top of comp_list.
Fixes: 81459350d5 ("io_uring: cache req->apoll->events in req->cflags")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-1 tells use to use the current position, but we check if the file is
a stream regardless of that. Fix up io_kiocb_update_pos() to only
dip into file if we need to. This is both more efficient and also drops
12 bytes of text on aarch64 and 64 bytes on x86-64.
Fixes: b4aec40015 ("io_uring: do not recalculate ppos unnecessarily")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The following WARN is triggered from kvm_vm_ioctl_set_clock():
WARNING: CPU: 10 PID: 579353 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:3161 mark_page_dirty_in_slot+0x6c/0x80 [kvm]
...
CPU: 10 PID: 579353 Comm: qemu-system-x86 Tainted: G W O 5.16.0.stable #20
Hardware name: LENOVO 20UF001CUS/20UF001CUS, BIOS R1CET65W(1.34 ) 06/17/2021
RIP: 0010:mark_page_dirty_in_slot+0x6c/0x80 [kvm]
...
Call Trace:
<TASK>
? kvm_write_guest+0x114/0x120 [kvm]
kvm_hv_invalidate_tsc_page+0x9e/0xf0 [kvm]
kvm_arch_vm_ioctl+0xa26/0xc50 [kvm]
? schedule+0x4e/0xc0
? __cond_resched+0x1a/0x50
? futex_wait+0x166/0x250
? __send_signal+0x1f1/0x3d0
kvm_vm_ioctl+0x747/0xda0 [kvm]
...
The WARN was introduced by commit 03c0304a86bc ("KVM: Warn if
mark_page_dirty() is called without an active vCPU") but the change seems
to be correct (unlike Hyper-V TSC page update mechanism). In fact, there's
no real need to actually write to guest memory to invalidate TSC page, this
can be done by the first vCPU which goes through kvm_guest_time_update().
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220407201013.963226-1-vkuznets@redhat.com>
Since current AVIC implementation cannot support encrypted memory,
inhibit AVIC for SEV-enabled guest.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220408133710.54275-1-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
+new file mode 100644
+WARNING: Missing or malformed SPDX-License-Identifier tag in line 1
+#27: FILE: Documentation/virt/kvm/x86/errata.rst:1:
Opportunistically update all other non-added KVM documents and
remove a new extra blank line at EOF for x86/errata.rst.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220406063715.55625-5-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The tsc_scaling_sync's binary should be present in the .gitignore
file for the git to ignore it.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220406063715.55625-3-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Remove hgatp zeroing in kvm_arch_vcpu_put()
- Fix alignment of the guest_hang() in KVM selftest
- Fix PTE A and D bits in KVM selftest
- Missing #include in vcpu_fp.c
-----BEGIN PGP SIGNATURE-----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=Q2bl
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-fixes-5.18-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv fixes for 5.18, take #1
- Remove hgatp zeroing in kvm_arch_vcpu_put()
- Fix alignment of the guest_hang() in KVM selftest
- Fix PTE A and D bits in KVM selftest
- Missing #include in vcpu_fp.c
The member 'msm_dsi->connector' isn't assigned until
msm_dsi_manager_connector_init() returns (see msm_dsi_modeset_init() and
how it assigns the return value). Therefore this pointer is going to be
NULL here. Let's use 'connector' which is what was intended.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Fixes: 6d5e784069 ("drm/msm/dsi: Move dsi panel init into modeset init path")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/478693/
Link: https://lore.kernel.org/r/20220318000731.2823718-1-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
kzalloc() is a memory allocation function which can return NULL when
some internal memory errors happen. So it is better to check it to
prevent potential wrong memory access.
Besides, since mdp5_plane_reset() is void type, so we should better
set `plane-state` to NULL after releasing it.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/481055/
Link: https://lore.kernel.org/r/tencent_8E2A1C78140EE1784AB2FF4B2088CC0AB908@qq.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The fourth param is size, rather than range_end.
Note that we could increase the address space size if we had a way to
prevent buffers from spanning a 4G split, mostly just to avoid fw bugs
with 64b math.
Fixes: 84c31ee16f ("drm/msm/a6xx: Add support for per-instance pagetables")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220407202836.1211268-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
kongweibin reported a kernel panic in ip6_forward() when input interface
has no in6 dev associated.
The following tc commands were used to reproduce this panic:
tc qdisc del dev vxlan100 root
tc qdisc add dev vxlan100 root netem corrupt 5%
CC: stable@vger.kernel.org
Fixes: ccd27f05ae ("ipv6: fix 'disable_policy' for fwd packets")
Reported-by: kongweibin <kongweibin2@huawei.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both of of_get_parent() and of_parse_phandle() return node pointer with
refcount incremented, use of_node_put() on it to decrease refcount
when done.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
cgroupv2 helper function ignores the already-looked up sk
and uses skb->sk instead.
Just pass sk from the calling function instead; this will
make cgroup matching work for udp and tcp in input even when
edemux did not set skb->sk already.
Fixes: e0bb96db96 ("netfilter: nft_socket: add support for cgroupsv2")
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Topi Miettinen <toiwoton@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Don't use sizeof(pointer) when calculating scnprintf offset.
Fixes: 01f84f0ed3 ("mac80211: reduce stack usage in debugfs")
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20220406175659.20611-1-greearb@candelatech.com
[correct the Fixes tag]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Synchronize additions to nontrans_list of transmitting BSS with
bss_lock to avoid races. Also when cfg80211_add_nontrans_list() fails
__cfg80211_unlink_bss() needs bss_lock to be held (has lockdep assert
on bss_lock). So protect the whole block with bss_lock to avoid
races and warnings. Found during code review.
Fixes: 0b8fb8235b ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://lore.kernel.org/r/1649668071-9370-1-git-send-email-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A user may set the SO_TXTIME socket option to ensure a packet is send
at a given time. The taprio scheduler has to confirm, that it is allowed
to send a packet at that given time, by a check against the packet time
schedule. The scheduler drop the packet, if the gates are closed at the
given send time.
The check, if SO_TXTIME is set, may fail since sk_flags are part of an
union and the union is used otherwise. This happen, if a socket is not
a full socket, like a request socket for example.
Add a check to verify, if the union is used for sk_flags.
Fixes: 4cfd5779bd ("taprio: Add support for txtime-assist mode")
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using a fixed-link, the altr_tse_pcs driver crashes
due to null-pointer dereference as no phy_device is provided to
tse_pcs_fix_mac_speed function. Fix this by adding a check for
phy_dev before calling the tse_pcs_fix_mac_speed() function.
Also clean up the tse_pcs_fix_mac_speed function a bit. There is
no need to check for splitter_base and sgmii_adapter_base
because the driver will fail if these 2 variables are not
derived from the device tree.
Fixes: fb3bbdb859 ("net: ethernet: Add TSE PCS support to dwmac-socfpga")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the T1 phy master/slave state is changed, at the end of config_aneg
function genphy_softreset is called. After the reset all the registers
configured during the config_init are restored to default value.
To avoid this, removed the genphy_softreset call.
v1->v2
------
Added the author in cc
Fixes: 8a1b415d70 ("net: phy: added ethtool master-slave configuration support")
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A microcode update on some Intel processors causes all TSX transactions
to always abort by default[*]. Microcode also added functionality to
re-enable TSX for development purposes. With this microcode loaded, if
tsx=on was passed on the cmdline, and TSX development mode was already
enabled before the kernel boot, it may make the system vulnerable to TSX
Asynchronous Abort (TAA).
To be on safer side, unconditionally disable TSX development mode during
boot. If a viable use case appears, this can be revisited later.
[*]: Intel TSX Disable Update for Selected Processors, doc ID: 643557
[ bp: Drop unstable web link, massage heavily. ]
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/347bd844da3a333a9793c6687d4e4eb3b2419a3e.1646943780.git.pawan.kumar.gupta@linux.intel.com
If CPUs on a node are offline at boot time, the number of nodes is
different when building affinity masks for present cpus and when building
affinity masks for possible cpus. This causes the following problem:
In the case that the number of vectors is less than the number of nodes
there are cases where bits of masks for present cpus are overwritten when
building masks for possible cpus.
Fix this by excluding CPUs, which are not part of the current build mask
(present/possible).
[ tglx: Massaged changelog and added comment ]
Fixes: b825921990 ("genirq/affinity: Spread IRQs to all available NUMA nodes")
Signed-off-by: Rei Yamamoto <yamamoto.rei@jp.fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220331003309.10891-1-yamamoto.rei@jp.fujitsu.com
tsx_clear_cpuid() uses MSR_TSX_FORCE_ABORT to clear CPUID.RTM and
CPUID.HLE. Not all CPUs support MSR_TSX_FORCE_ABORT, alternatively use
MSR_IA32_TSX_CTRL when supported.
[ bp: Document how and why TSX gets disabled. ]
Fixes: 293649307e ("x86/tsx: Clear CPUID bits when TSX always force aborts")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/5b323e77e251a9c8bcdda498c5cc0095be1e1d3c.1646943780.git.pawan.kumar.gupta@linux.intel.com
For this specific device on Lenovo Thinkpad X12 tablet, the verbs were
dumped by qemu running a guest OS that init this codec properly.
After studying the dump, it turns out that
the same quirk used by the other Lenovo devices can be reused.
The patch was tested working against the mainline kernel.
Cc: <stable@vger.kernel.org>
Signed-off-by: Tao Jin <tao-j@outlook.com>
Link: https://lore.kernel.org/r/CO6PR03MB6241CD73310B37858FE64C85E1E89@CO6PR03MB6241.namprd03.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The intent of the version check in the mmap ioctl was to maintain
support for existing platforms (i.e., ADL/RPL and earlier), but drop
support on all future igpu platforms. As we've seen on the dgpu side,
the hardware teams are using a more fine-grained numbering system for IP
version numbers these days, so it's possible the version number
associated with our next igpu could be some form of "12.xx" rather than
13 or higher. Comparing against the full ver.release number will ensure
the intent of the check is maintained no matter what numbering the
hardware teams settle on.
Fixes: d3f3baa356 ("drm/i915: Reinstate the mmap ioctl for some platforms")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407161839.1073443-1-matthew.d.roper@intel.com
(cherry picked from commit 8e7e5c077c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Give applications a way to tell if the kernel supports sane linked files,
as in files being assigned at the right time to be able to reliably
do <open file direct into slot X><read file from slot X> while using
IOSQE_IO_LINK to order them.
Not really a bug fix, but flag it as such so that it gets pulled in with
backports of the deferred file assignment.
Fixes: 6bf9c47a39 ("io_uring: defer file assignment")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a single serial driver fix for a build issue that showed up due
to changes that came in through the tty tree in 5.18-rc1 that were
missed previously. It resolves a build error with the mpc52xx_uart
driver.
It has been in linux-next this week with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYlLSOw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykUDQCgpgjEqSAUVXHS3NMjIppMSF8RfD4AoNYjH7Hl
oVs5nzWNDcbZPvvh+TFw
=F6pL
-----END PGP SIGNATURE-----
Merge tag 'tty-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fix from Greg KH:
"This is a single serial driver fix for a build issue that showed up
due to changes that came in through the tty tree in 5.18-rc1 that were
missed previously. It resolves a build error with the mpc52xx_uart
driver.
It has been in linux-next this week with no reported problems"
* tag 'tty-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned, part II.
Here is a single staging driver fix for 5.18-rc2 that resolves an endian
issue for the r8188eu driver. It has been in linux-next all this week
with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYlLRlw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylqdgCcCNVlN2uYRqAYjVyZmYSNKumgzN8AoMm1/DVT
bT68T73BB/g1TFMNjuwy
=Ho+t
-----END PGP SIGNATURE-----
Merge tag 'staging-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 5.18-rc2 that resolves an
endian issue for the r8188eu driver. It has been in linux-next all
this week with no reported problems"
* tag 'staging-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: Fix PPPoE tag insertion on little endian systems
Here are 2 small driver core changes for 5.18-rc2.
They are the final bits in the removal of the default_attrs field in
struct kobj_type. I had to wait until after 5.18-rc1 for all of the
changes to do this came in through different development trees, and then
one new user snuck in. So this series has 2 changes:
- removal of the default_attrs field in the powerpc/pseries/vas
code. Change has been acked by the PPC maintainers to come
through this tree
- removal of default_attrs from struct kobj_type now that all
in-kernel users are removed. This cleans up the kobject code
a little bit and removes some duplicated functionality that
confused people (now there is only one way to do default
groups.)
All of these have been in linux-next for all of this week with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYlLRHg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn+9gCfXN0OvKmw5QD55z8YGp/jIycK0ToAnifJ/OX+
sU2V8ZQfNbV8xw7iXfc2
=L+Uc
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are two small driver core changes for 5.18-rc2.
They are the final bits in the removal of the default_attrs field in
struct kobj_type. I had to wait until after 5.18-rc1 for all of the
changes to do this came in through different development trees, and
then one new user snuck in. So this series has two changes:
- removal of the default_attrs field in the powerpc/pseries/vas code.
The change has been acked by the PPC maintainers to come through
this tree
- removal of default_attrs from struct kobj_type now that all
in-kernel users are removed.
This cleans up the kobject code a little bit and removes some
duplicated functionality that confused people (now there is only
one way to do default groups)
Both of these have been in linux-next for all of this week with no
reported problems"
* tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kobject: kobj_type: remove default_attrs
powerpc/pseries/vas: use default_groups in kobj_type
