Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731122311.1143153-6-tzimmermann@suse.de
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731122311.1143153-5-tzimmermann@suse.de
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731122311.1143153-4-tzimmermann@suse.de
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Xinhui Pan <Xinhui.Pan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731122311.1143153-2-tzimmermann@suse.de
Add max_tmds_clock validation to prepare for additions and changes to
the MPLL config table. Use the same rate restrictions that is currently
applied.
The rate limit for RK3288, RK3399 and RK3568 is based on current mpll
table. The rate limit for RK3228 and RK3328 is based on the
inno-hdmi-phy pre-pll table.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240615170417.3134517-7-jonas@kwiboo.se
EDID cannot be read on RK3328 until after read_hpd has been called and
correct io voltage has been configured based on connection status.
When a forced mode is used, e.g. video=1920x1080@60e, the connector
detect ops, that in turn normally calls the read_hpd, never gets called.
This result in reading EDID to fail in connector get_modes ops.
Call dw_hdmi_rk3328_read_hpd at end of dw_hdmi_rk3328_setup_hpd to
correct io voltage and allow reading EDID after setup_hpd.
Fixes: 1c53ba8f22 ("drm/rockchip: dw_hdmi: add dw-hdmi support for the rk3328")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240615170417.3134517-5-jonas@kwiboo.se
There is no reason to limit VOP scaling to 3840px width, the limit of
RK3288, when there are newer VOP versions that support 4096px width.
Change to enforce a maximum of 4096px width plane scaling, the maximum
supported output width of the VOP versions supported by this driver.
Fixes: 4c156c21c7 ("drm/rockchip: vop: support plane scale")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240615170417.3134517-4-jonas@kwiboo.se
The mpll_cfg, cur_ctr and phy_config members in struct dw_hdmi_plat_data
are only used to configure the Synopsys PHYs supported internally by DW
HDMI transmitter driver (gpu/drm/bridge/synopsys/dw-hdmi.c), via
hdmi_phy_configure_dwc_hdmi_3d_tx(), which is further invoked from
dw_hdmi_phy_init(). This is part of the internal
dw_hdmi_synopsys_phy_ops struct, managed within dw_hdmi_detect_phy().
To handle vendor PHYs, DW HDMI driver doesn't make use of the internal
PHY ops and, instead, relies on the glue layer to provide the phy_ops
and phy_name members of struct dw_hdmi_plat_data.
Drop the unnecessary assignments of DW internal PHY related members from
structs rk3228_hdmi_drv_data and rk3328_hdmi_drv_data, since both set
the phy_force_vendor flag and correctly provide the expected vendor PHY
data.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240813-dw-hdmi-rockchip-cleanup-v1-4-b3e73b5f4fd6@collabora.com
Make use of devm_clk_get_optional_enabled() to replace devm_clk_get()
and clk_prepare_enable() for ref_clk and drop the now unnecessary calls
to clk_disable_unprepare().
Additionally, use devm_clk_get_optional() helper for grf_clk to replace
the open coding call to devm_clk_get() followed by the -ENOENT test.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240813-dw-hdmi-rockchip-cleanup-v1-2-b3e73b5f4fd6@collabora.com
Prefer drm_{err|info|dbg}() over deprecated DRM_DEV_{ERROR|INFO|DEBUG}()
logging macros.
Conversion done with the help of the following semantic patch, followed
by a few minor indentation adjustments:
@@
identifier T;
@@
(
-DRM_DEV_ERROR(T->dev,
+drm_err(T,
...)
|
-DRM_DEV_INFO(T->dev,
+drm_info(T,
...)
|
-DRM_DEV_DEBUG(T->dev,
+drm_dbg(T,
...)
)
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240813-dw-hdmi-rockchip-cleanup-v1-1-b3e73b5f4fd6@collabora.com
The RK3066 VOP sets a dma_stop bit when it's done scanning out a frame
and needs the driver to acknowledge that by clearing the bit.
Unless we clear it "between" frames, the RGB output only shows noise
instead of the picture. atomic_flush is the place for it that least
affects other code (doing it on vblank would require converting all
other usages of the reg_lock to spin_(un)lock_irq, which would affect
performance for everyone).
This seems to be a redundant synchronization mechanism that was removed
in later iterations of the VOP hardware block.
Fixes: f4a6de855e ("drm: rockchip: vop: add rk3066 vop definitions")
Cc: stable@vger.kernel.org
Signed-off-by: Val Packett <val@packett.cool>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624204054.5524-2-val@packett.cool
Driver makes use of the BIT() macro, but relies on the bits header being
implicitly included.
Explicitly pull the header in to avoid potential build failures in some
configurations.
While at it, reorder include directives alphabetically.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807-b4-rk3588-bridge-upstream-v3-4-60d6bab0dc7c@collabora.com
'struct drm_encoder_helper_funcs' is not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
7458 552 0 8010 1f4a drivers/gpu/drm/rockchip/analogix_dp-rockchip.o
After:
=====
text data bss dec hex filename
7578 424 0 8002 1f42 drivers/gpu/drm/rockchip/analogix_dp-rockchip.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/128f9941aab3b1367eb7abca4ac26e2e5dd6ad21.1720903899.git.christophe.jaillet@wanadoo.fr
Clean up a few logged messages, which were previously worded as rather
incomplete sentences separated by periods. This was both a bit unreadable
and grammatically incorrect, so convert them into partial sentences separated
(or connected) by semicolons, together with some wording improvements.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Andy Yan <andyshrk@163.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/92db74a313547c087cc71059428698c4ec37a9ae.1720048818.git.dsimic@manjaro.org
We'll want to stop drm_edid_block_valid() usage. KVMGT is the last
user. Replace with drm_edid_valid(), which unfortunately requires an
allocated drm_edid. However, on the plus side, this would be required to
handle the TODO comment about EDID extension block support.
Acked-by: Zhi Wang <zhiwang@kernel.rog>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812142849.1588006-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Debug printing at DisplayID validation leads to lots of log spamming as
it's called at DisplayID iterators during EDID parsing. Remove it, and
replace with a less noisy message at connector EDID update.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606123503.2825088-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Uprev mesa to adapt to the latest changes in mesa ci.
Project 'anholt/deqp-runner' was moved to 'mesa/deqp-runner'.
So update the link.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807082020.429434-1-vignesh.raman@collabora.com
GitHub Dependabot has issued the following alert:
"Upgrade setuptools to version 70.0.0 or later.
A vulnerability in the package_index module of pypa/setuptools
versions up to 69.1.1 allows for remote code execution via its
download functions. These functions, which are used to download
packages from URLs provided by users or retrieved from package
index servers, are susceptible to code injection. If these
functions are exposed to user-controlled inputs, such as package
URLs, they can execute arbitrary commands on the system. The
issue is fixed in version 70.0.
Severity: 8.8 / 10 (High)
Attack vector: Network
Attack complexity: Low
Privileges required: None
User interaction: Required
Scope: Unchanged
Confidentiality: High
Integrity: High
Availability: High
CVE ID: CVE-2024-6345"
To avoid disturbing everyone with the kernel repo hosted on GitHub,
I suggest we upgrade our python dependencies once again to appease
GitHub Dependabot.
Link: https://github.com/dependabot
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0237854884D6DB3C+20240716083743.33415-1-wangyuli@uniontech.com
Use multi style wrapped functions for mipi_dsi in the
startek-kd070fhfid015 panel.
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806135949.468636-3-tejasvipin76@gmail.com
Add more functions that can benefit from being multi style and mark
older variants as deprecated to eventually convert all mipi_dsi functions
to multi style.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
[dianders: Fixed whitespace warning when applying]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806135949.468636-2-tejasvipin76@gmail.com
This code has an issue because it loops until "i" is set to UINT_MAX but
the test for failure assumes that "i" is set to zero. The result is that
it will only print an error message if we succeed on the very last try.
Reformat the loop to count forwards instead of backwards.
Fixes: 2281475168 ("drm/ast: astdp: Perform link training during atomic_enable")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1ba8da25-2d09-4924-a4ff-c0714bfbb192@stanley.mountain
hibmc_mm_init() has been removed since commit 28645ae064
("drm/hisilicon/hibmc: Remove hibmc_ttm.c"), but remain the declaration
untouched in the header files. So, let's remove this unused declaration.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812123543.64300-1-zhangzekun11@huawei.com
The output_poll_changed hook in struct drm_mode_config_funcs is
unused. Remove it. The helper drm_client_dev_hotplug() implements
the callback's functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812083000.337744-10-tzimmermann@suse.de
The lastclose callback in struct drm_driver is unused. Remove it. Also
update documentation.
v2:
- update to use drm_lastclose()
- fix typo in documentation
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812083000.337744-9-tzimmermann@suse.de
Replace the call to drm_fb_helper_output_poll_changed() with a call
to drm_client_dev_hotplug(). It is equivalent in functionality, but
uses the DRM client infrastructure.
v2:
- fix commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812083000.337744-6-tzimmermann@suse.de
The output_poll_changed hook was only necessary before in-kernel
DRM clients existed, but is now obsolete. The client code handles
display hotplugging internally.
v2:
- fix commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812083000.337744-5-tzimmermann@suse.de
Remove the implementation of struct drm_driver.lastclose. The hook
was only necessary before in-kernel DRM clients existed, but is now
obsolete. The code in nouveau_vga_lastclose() is performed by
drm_lastclose().
v2:
- update commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812083000.337744-4-tzimmermann@suse.de
Remove the implementation of struct drm_driver.lastclose. The hook
was only necessary before in-kernel DRM clients existed, but is now
obsolete. The code in amdgpu_driver_lastclose_kms() is performed by
drm_lastclose().
v2:
- update commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812083000.337744-3-tzimmermann@suse.de
Amdgpu and nouveau call vga_switcheroo_process_delayed_switch() from
their lastclose callbacks. Call it from drm_lastclose(), so that the
driver functions can finally be removed. Only PCI devices with enabled
switcheroo do the delayed switching. The call has no effect on other
hardware.
v2:
- move change to drm_lastclose() (Sima)
- update docs for vga_switcheroo_process_delayed_switch()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812083000.337744-2-tzimmermann@suse.de
Fix the unexpected indentation errors.
drm_connector.c has some kerneldoc comments that were missing newlines.
This results in the following warnings when running make htmldocs:
./Documentation/gpu/drm-kms:538: ./drivers/gpu/drm/drm_connector.c:2344: WARNING: Definition list ends without a blank line; unexpected unindent. [docutils]
./Documentation/gpu/drm-kms:538: ./drivers/gpu/drm/drm_connector.c:2346: ERROR: Unexpected indentation. [docutils]
./Documentation/gpu/drm-kms:538: ./drivers/gpu/drm/drm_connector.c:2368: WARNING: Block quote ends without a blank line; unexpected unindent. [docutils]
./Documentation/gpu/drm-kms:538: ./drivers/gpu/drm/drm_connector.c:2381: ERROR: Unexpected indentation. [docutils]
Signed-off-by: Daniel Yang <danielyangkang@gmail.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
[hmahfooz: append drm/connector prefix]
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809032350.226382-1-danielyangkang@gmail.com
This patch takes care of the following warnings during documentation
compiling:
./include/uapi/drm/drm_mode.h:869: warning: Function parameter or struct member 'width' not described in 'drm_plane_size_hint'
./include/uapi/drm/drm_mode.h:869: warning: Function parameter or struct member 'height' not described in 'drm_plane_size_hint'
Signed-off-by: Mohammed Anees <pvmohammedanees2003@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240811101653.170223-1-pvmohammedanees2003@gmail.com
Now that kmsg dump callback has the description parameter, use it in
the user panic screen.
This is the string passed to panic(), like "VFS: Unable to mount root
fs on xxx" or "Attempted to kill init! exitcode=0xxxx".
It gives a hint on why the panic occurred, without being too cryptic.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807134902.458669-6-jfalempe@redhat.com
Move the copyright notice to the top of drm_panic.h, and add the
missing Red Hat copyright notice.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807134902.458669-5-jfalempe@redhat.com
drm_panic_[un]register() are only used by the core drm, and are not
intended to be called by other drm drivers, so move their prototypes
to drm_crtc_internal.h.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807134902.458669-4-jfalempe@redhat.com
drm_panic_[un]register() are called only from the core drm, so there
is no need to export them.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807134902.458669-3-jfalempe@redhat.com
There is no space between the last word, and the punctuation mark in
English.
Suggested-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807134902.458669-2-jfalempe@redhat.com
Mgag200's BMC connector tracks the status of an underlying physical
connector and updates the BMC status accordingly. This functionality
works around GNOME's settings app, which cannot handle multiple
outputs on the same CRTC.
The workaround is now obsolete as the VGA-BMC connector handles BMC
support internally. Hence, remove the driver's code and the BMC output
entirely.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805130622.63458-6-tzimmermann@suse.de
Move calls to stop and start BMC scanout from CRTC helpers to the
VGA-BMC encoder's atomic_disable and atomic_enable. Makes the BMC
scanout transparent to the CRTC.
DRM's atomic helpers call an encoder's atomic_disable and atomic_enable
helpers for all enabled encoders. The BMC stops scanning out the VGA
signal if modeset disables the VGA encoder, and starts scanning out
if the modeset enables the VGA encoder.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805130622.63458-5-tzimmermann@suse.de
Control the VIDRST pin from the VGA-BMC encoder's atomic_check and
remove the respective code from CRTC. Makes the VIDRST functionality
fully composable.
The VIDRST pin allows an external clock source to control the SYNC
signals of the Matrox chip. The functionality is part of the CRTC,
but depends on the presence of the clock source. This is the case for
some BMCs, so control the pin from the VGA-BMC output.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805130622.63458-4-tzimmermann@suse.de
