The Linux console's VT102 implementation already consumes OSC
("Operating System Command") sequences, probably because that's how
palette changes are transmitted.
In addition to OSC, there are three other major clases of ANSI control
strings: APC ("Application Program Command"), PM ("Privacy Message"),
and DCS ("Device Control String"). They are handled similarly to OSC in
terms of termination.
Source: vt100.net
Add three new enumerated states, one for each of these types. All three
are handled the same way right now--they simply consume input until
terminated. I hope to expand upon this firmament in the future. Add
new predicate ansi_control_string(), returning true for any of these
states. Replace explicit checks against ESosc with calls to this
function. Transition to these states appropriately from the escape
initiation (ESesc) state.
This was motivated by the following Notcurses bugs:
https://github.com/dankamongmen/notcurses/issues/2050https://github.com/dankamongmen/notcurses/issues/1828https://github.com/dankamongmen/notcurses/issues/2069
where standard VT sequences are not consumed by the Linux console. It's
not necessary that the Linux console *support* these sequences, but it
ought *consume* these well-specified classes of sequences.
Tested by sending a variety of escape sequences to the console, and
verifying that they still worked, or were now properly consumed.
Verified that the escapes were properly terminated at a generic level.
Verified that the Notcurses tools continued to show expected output on
the Linux console, except now without escape bleedthrough.
Link: https://lore.kernel.org/lkml/YSydL0q8iaUfkphg@schwarzgerat.orthanc/
Signed-off-by: nick black <dankamongmen@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This just does the "if the architecture does efficient unaligned
handling, start the memcmp using 'unsigned long' accesses", since
Nikolay Borisov found a load that cares.
This is basically the minimal patch, and limited to architectures that
are known to not have slow unaligned handling. We've had the stupid
byte-at-a-time version forever, and nobody has ever even noticed before,
so let's keep the fix minimal.
A potential further improvement would be to align one of the sources in
order to at least minimize unaligned cases, but the only real case of
bigger memcmp() users seems to be the FIDEDUPERANGE ioctl(). As David
Sterba says, the dedupe ioctl is typically called on ranges spanning
many pages so the common case will all be page-aligned anyway.
All the relevant architectures select HAVE_EFFICIENT_UNALIGNED_ACCESS,
so I'm not going to worry about the combination of a very rare use-case
and a rare architecture until somebody actually hits it. Particularly
since Nikolay also tested the more complex patch with extra alignment
handling code, and it only added overhead.
Link: https://lore.kernel.org/lkml/20210721135926.602840-1-nborisov@suse.com/
Reported-by: Nikolay Borisov <nborisov@suse.com>
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When new work is added, io_wqe_enqueue() checks if we need to wake or
create a new worker. But that check is done outside the lock that
otherwise synchronizes us with a worker going to sleep, so we can end
up in the following situation:
CPU0 CPU1
lock
insert work
unlock
atomic_read(nr_running) != 0
lock
atomic_dec(nr_running)
no wakeup needed
Hold the wqe lock around the "need to wakeup" check. Then we can also get
rid of the temporary work_flags variable, as we know the work will remain
valid as long as we hold the lock.
Cc: stable@vger.kernel.org
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring no longer queues async work off completion handlers that run in
hard or soft interrupt context, and that use case was the only reason that
io-wq had to use IRQ safe locks for wqe and worker locks.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For the two places where new workers are created, we diligently check if
we are allowed to create a new worker. If we're currently at the limit
of how many workers of a given type we can have, then we don't create
any new ones.
If you have a mixed workload with various types of bound and unbounded
work, then it can happen that a worker finishes one type of work and
is then transitioned to the other type. For this case, we don't check
if we are actually allowed to do so. This can cause io-wq to temporarily
exceed the allowed number of workers for a given type.
When retrieving work, check that the types match. If they don't, check
if we are allowed to transition to the other type. If not, then don't
handle the new work.
Cc: stable@vger.kernel.org
Reported-by: Johannes Lundberg <johalun0@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Quite a quiet release this time, mostly a combination of cleanups
and a good set of new drivers.
- Lots of cleanups and improvements to the Intel drivers,
including some new systems support.
- New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek
Mt8195, Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P,
Renesas RZ/G2L,, Rockchip RK3568 S/PDIF.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmEsxhYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0Py1B/0dVvB5iLx7t7Vp3EbxIbAQ/4URpmfV
A/yIWY6fii6vhVsdsqU+8FN7D5m5ZpVUx+3kH//oCsPL7VLem3sjh64lge1lQz4A
9G9FU63nSCY8X0dL4cfZTNEd+FYrCHZDqU8y7oJg+v3U7D42MVLhTwySaCuP6W56
KZhxOUIuyfIrhmkfBEAUCA6jyPSbVAy7Aw9B5WhJhX07yw0vToxnycbTnjwMzMYn
3Bvfycyg9pqpxAdCuJVPVs3S8+CM5/+QjKb0J6vy1Zuw49jNSUdkvuyRWXZsAoAF
zepXWEKXvclKNZDR0N1AO4H+9fUeSvkc/IX7XEHZ0Zk8w2eMico0ceAz
=BHW1
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.15
Quite a quiet release this time, mostly a combination of cleanups
and a good set of new drivers.
- Lots of cleanups and improvements to the Intel drivers,
including some new systems support.
- New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek
Mt8195, Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P,
Renesas RZ/G2L,, Rockchip RK3568 S/PDIF.
'enum' is equivalent to 'oneOf' with a list of 'const' entries, but 'enum'
is more concise and yields better error messages.
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: dmaengine@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: linux-phy@lists.infradead.org
Cc: linux-serial@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-spi@vger.kernel.org
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> (mipi-ccs)
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210824202014.978922-1-robh@kernel.org
Add a if statements to avoid the warning.
Dan Carpenter report:
The patch faf482ca19: "net: ipv4: Move ip_options_fragment() out of
loop" from Aug 23, 2021, leads to the following Smatch complaint:
net/ipv4/ip_output.c:833 ip_do_fragment()
warn: variable dereferenced before check 'iter.frag' (see line 828)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: faf482ca19 ("net: ipv4: Move ip_options_fragment() out of loop")
Link: https://lore.kernel.org/netdev/20210830073802.GR7722@kadam/T/#t
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
These checks are still not strict enough. The main problem is that if
"cb->type == QRTR_TYPE_NEW_SERVER" is true then "len - hdrlen" is
guaranteed to be 4 but we need to be at least 16 bytes. In fact, we
can reject everything smaller than sizeof(*pkt) which is 20 bytes.
Also I don't like the ALIGN(size, 4). It's better to just insist that
data is needs to be aligned at the start.
Fixes: 0baa99ee35 ("net: qrtr: Allow non-immediate node routing")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot report an array-index-out-of-bounds in taprio_change
index 16 is out of range for type '__u16 [16]'
that's because mqprio->num_tc is lager than TC_MAX_QUEUE,so we check
the return value of netdev_set_num_tc.
Reported-by: syzbot+2b3e5fb6c7ef285a94f6@syzkaller.appspotmail.com
Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In netlbl_cipsov4_add_std() when 'doi_def->map.std' alloc
failed, we sometime observe panic:
BUG: kernel NULL pointer dereference, address:
...
RIP: 0010:cipso_v4_doi_free+0x3a/0x80
...
Call Trace:
netlbl_cipsov4_add_std+0xf4/0x8c0
netlbl_cipsov4_add+0x13f/0x1b0
genl_family_rcv_msg_doit.isra.15+0x132/0x170
genl_rcv_msg+0x125/0x240
This is because in cipso_v4_doi_free() there is no check
on 'doi_def->map.std' when doi_def->type got value 1, which
is possibe, since netlbl_cipsov4_add_std() haven't initialize
it before alloc 'doi_def->map.std'.
This patch just add the check to prevent panic happen in similar
cases.
Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
inet: make exception handling less predictible
This second round of patches is addressing Keyu Man recommendations
to make linux hosts more robust against a class of brute force attacks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Even after commit 6457378fe7 ("ipv4: use siphash instead of Jenkins in
fnhe_hashfun()"), an attacker can still use brute force to learn
some secrets from a victim linux host.
One way to defeat these attacks is to make the max depth of the hash
table bucket a random value.
Before this patch, each bucket of the hash table used to store exceptions
could contain 6 items under attack.
After the patch, each bucket would contains a random number of items,
between 6 and 10. The attacker can no longer infer secrets.
This is slightly increasing memory size used by the hash table,
by 50% in average, we do not expect this to be a problem.
This patch is more complex than the prior one (IPv6 equivalent),
because IPv4 was reusing the oldest entry.
Since we need to be able to evict more than one entry per
update_or_create_fnhe() call, I had to replace
fnhe_oldest() with fnhe_remove_oldest().
Also note that we will queue extra kfree_rcu() calls under stress,
which hopefully wont be a too big issue.
Fixes: 4895c771c7 ("ipv4: Add FIB nexthop exceptions.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Tested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even after commit 4785305c05 ("ipv6: use siphash in rt6_exception_hash()"),
an attacker can still use brute force to learn some secrets from a victim
linux host.
One way to defeat these attacks is to make the max depth of the hash
table bucket a random value.
Before this patch, each bucket of the hash table used to store exceptions
could contain 6 items under attack.
After the patch, each bucket would contains a random number of items,
between 6 and 10. The attacker can no longer infer secrets.
This is slightly increasing memory size used by the hash table,
we do not expect this to be a problem.
Following patch is dealing with the same issue in IPv4.
Fixes: 35732d01fe ("ipv6: introduce a hash table to store dst cache")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Cc: Wei Wang <weiwan@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since we have the nice helpers pr_err() and pr_warn(), use them instead
of raw printk().
[jgross@suse.com] Move the "#define pr_fmt" above the #includes in
order to avoid build warnings due to redefinition.
Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20210825114111.29009-1-zhaoxiao@uniontech.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Use BUG_ON instead of a if condition followed by BUG.
Generated by: scripts/coccinelle/misc/bugon.cocci
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jing Yangyang <jing.yangyang@zte.com.cn>
Reviewed-by: SeongJae Park <sjpark@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20210825062451.69998-1-deng.changcheng@zte.com.cn
Signed-off-by: Juergen Gross <jgross@suse.com>
Today blkfront will trust the backend to send only sane response data.
In order to avoid privilege escalations or crashes in case of malicious
backends verify the data to be within expected limits. Especially make
sure that the response always references an outstanding request.
Introduce a new state of the ring BLKIF_STATE_ERROR which will be
switched to in case an inconsistency is being detected. Recovering from
this state is possible only via removing and adding the virtual device
again (e.g. via a suspend/resume cycle).
Make all warning messages issued due to valid error responses rate
limited in order to avoid message floods being triggered by a malicious
backend.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20210730103854.12681-4-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
In order to avoid a malicious backend being able to influence the local
copy of a request build the request locally first and then copy it to
the ring page instead of doing it the other way round as today.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20210730103854.12681-3-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
In order to avoid problems in case the backend is modifying a response
on the ring page while the frontend has already seen it, just read the
response into a local buffer in one go and then operate on that buffer
only.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20210730103854.12681-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Clean up and consolidate ct ecache infrastructure by merging ct and
expect notifiers, from Florian Westphal.
2) Missing counters and timestamp in nfnetlink_queue and _log conntrack
information.
3) Missing error check for xt_register_template() in iptables mangle,
as a incremental fix for the previous pull request, also from
Florian Westphal.
4) Add netfilter hooks for the SRv6 lightweigh tunnel driver, from
Ryoga Sato. The hooks are enabled via nf_hooks_lwtunnel sysctl
to make sure existing netfilter rulesets do not break. There is
a static key to disable the hooks by default.
The pktgen_bench_xmit_mode_netif_receive.sh shows no noticeable
impact in the seg6_input path for non-netfilter users: similar
numbers with and without this patch.
This is a sample of the perf report output:
11.67% kpktgend_0 [ipv6] [k] ipv6_get_saddr_eval
7.89% kpktgend_0 [ipv6] [k] __ipv6_addr_label
7.52% kpktgend_0 [ipv6] [k] __ipv6_dev_get_saddr
6.63% kpktgend_0 [kernel.vmlinux] [k] asm_exc_nmi
4.74% kpktgend_0 [ipv6] [k] fib6_node_lookup_1
3.48% kpktgend_0 [kernel.vmlinux] [k] pskb_expand_head
3.33% kpktgend_0 [ipv6] [k] ip6_rcv_core.isra.29
3.33% kpktgend_0 [ipv6] [k] seg6_do_srh_encap
2.53% kpktgend_0 [ipv6] [k] ipv6_dev_get_saddr
2.45% kpktgend_0 [ipv6] [k] fib6_table_lookup
2.24% kpktgend_0 [kernel.vmlinux] [k] ___cache_free
2.16% kpktgend_0 [ipv6] [k] ip6_pol_route
2.11% kpktgend_0 [kernel.vmlinux] [k] __ipv6_addr_type
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
XENFEAT_gnttab_map_avail_bits is always set in Xen 4.0 and newer.
Remove coding assuming it might be zero.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210730071804.4302-4-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
XENFEAT_mmu_pt_update_preserve_ad is always set in Xen 4.0 and newer.
Remove coding assuming it might be zero.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210730071804.4302-3-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Linux kernel is not supported to run on Xen versions older than 4.0.
Add tests for required Xen features always being present in Xen 4.0
and newer.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210730071804.4302-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Xen PV guests are specifying the highest used PFN via the max_pfn
field in shared_info. This value is used by the Xen tools when saving
or migrating the guest.
Unfortunately this field is misnamed, as in reality it is specifying
the number of pages (including any memory holes) of the guest, so it
is the highest used PFN + 1. Renaming isn't possible, as this is a
public Xen hypervisor interface which needs to be kept stable.
The kernel will set the value correctly initially at boot time, but
when adding more pages (e.g. due to memory hotplug or ballooning) a
real PFN number is stored in max_pfn. This is done when expanding the
p2m array, and the PFN stored there is even possibly wrong, as it
should be the last possible PFN of the just added P2M frame, and not
one which led to the P2M expansion.
Fix that by setting shared_info->max_pfn to the last possible PFN + 1.
Fixes: 98dd166ea3 ("x86/xen/p2m: hint at the last populated P2M entry")
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20210730092622.9973-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Linus Walleij says:
====================
IXP46x PTP Timer clean-up and DT
ChangeLog v2->v3:
- Dropped the patch enabling compile tests: we are still dependent
on some machine-specific headers. The plan is to get rid of this
after device tree conversion. We include one of the compile testing
fixes anyway, because it is nice to have fixed.
- Rebased on the latest net-next
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds device tree probing support for the PTP module
adjacent to the ethernet module. It is pretty straight
forward, all resources are in the device tree as they
come to the platform device.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds device tree bindings for the IXP46x PTP Timer, a companion
to the IXP4xx ethernet in newer platforms.
Cc: devicetree@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver is being passed interrupts, then looking up the
same interrupts as GPIOs a second time to convert them into
interrupts and set properties on them.
This is pointless: the GPIO and irqchip APIs of a GPIO chip
are orthogonal. Just request the interrupts and be done
with it, drop reliance on any GPIO functions or definitions.
Use devres-managed functions and add a small devress quirk
to unregister the clock as well and we can rely on devres
to handle all the resources and cut down a bunch of
boilerplate in the process.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the driver to use portable integer types to avoid warnings
during compile testing, including:
drivers/net/ethernet/xscale/ixp4xx_eth.c:721:21: error: cast to 'u32 *' (aka 'unsigned int *') from smaller integer type 'int' [-Werror,-Wint-to-pointer-cast]
memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
^
drivers/net/ethernet/xscale/ixp4xx_eth.c:963:12: error: incompatible pointer types passing 'u32 *' (aka 'unsigned int *') to parameter of type 'dma_addr_t *' (aka 'unsigned long long *') [-Werror,-Wincompatible-pointer-types]
&port->desc_tab_phys)))
^~~~~~~~~~~~~~~~~~~~
include/linux/dmapool.h:27:20: note: passing argument to parameter 'handle' here
dma_addr_t *handle);
^
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the recent ixp4xx cleanups, the ptp driver has gained a
build failure in some configurations:
drivers/net/ethernet/xscale/ptp_ixp46x.c: In function 'ptp_ixp_init':
drivers/net/ethernet/xscale/ptp_ixp46x.c:290:51: error: 'IXP4XX_TIMESYNC_BASE_VIRT' undeclared (first use in this function)
Avoid the last bit of hardcoded constants from platform headers
by turning the ptp driver bit into a platform driver and passing
the IRQ and MMIO address as resources.
This is a bit tricky:
- The interface between the two drivers is now the new
ixp46x_ptp_find() function, replacing the global
ixp46x_phc_index variable. The call is done as late
as possible, in hwtstamp_set(), to ensure that the
ptp device is fully probed.
- As the ptp driver is now called by the network driver, the
link dependency is reversed, which in turn requires a small
Makefile hack
- The GPIO number is still left hardcoded. This is clearly not
great, but it can be addressed later. Note that commit 98ac0cc270
("ARM: ixp4xx: Convert to MULTI_IRQ_HANDLER") changed the
IRQ number to something meaningless. Passing the correct IRQ
in a resource fixes this.
- When the PTP driver is disabled, ethtool .get_ts_info()
now correctly lists only software timestamping regardless
of the hardware.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[Fix a missing include]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang says:
====================
net: hns3: add some cleanups
This series includes some cleanups for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The parameter name of hclge_ptp_clean_tx_hwts() in declaration is "dev",
but the definition of this function is used the common name "hdev" as
other functions, so modify it.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the "? :" statement wich max() to simplify code.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The type of tqp_vector->vector_irq is int, so modify its print format
to "%d".
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To improve flexibility, simplicity and maintainability to dump info of
every element of tm priority, add a struct hclge_dbg_item array of tm
priority and fill string of every data according to this array.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch reconstructs function hclge_ets_validate() to reduce the code
cycle complexity and make code more concise.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch reconstructs function hns3_self_test to reduce the code
cycle complexity and make code more concise.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To make the format of each member initialization of structure array
clearer, initialize each member on a separate line.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan says:
====================
bnxt_en: Implement new driver APIs to send FW messages
The current driver APIs to send messages to the firmware allow only one
outstanding message in flight. There is only one buffer for the firmware
response for each firmware channel. To send a firmware message, all
callers must take a mutex and it is released after the firmware response
has been read. This scheme does not allow multiple firmware messages
in flight. Firmware may take a long time to respond to some messages
(e.g. NVRAM related ones) and this causes the mutex to be held for
a long time, blocking other callers.
This patchset intoduces the new driver APIs to address the above
shortcomings. The new APIs are compatible with new and old firmware.
But the new deferred firmware response mechanism will require newer
firmware in order to allow multiple outstanding firmware commands.
All callers are updated to use the new APIs.
v2: Patch 4 and patch 9 updated to fix issues reported by test robot
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add infrastructure to maintain a pending list of HWRM commands awaiting
completion and reduce the scope of the hwrm_cmd_lock mutex so that it
protects only the request mailbox. The mailbox is free to use for one
or more concurrent commands after receiving deferred response events.
For uniformity and completeness, use the same pending list for
collecting completions for commands that respond via a completion ring.
These commands are only used for freeing rings and for IRQ test and
we only support one such command in flight.
Note deferred responses are also only supported on the main channel.
The secondary channel (KONG) does not support deferred responses.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are no longer any callers relying on the old API.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
