Merge series from Walker Chen <walker.chen@starfivetech.com>:
This patchset adds TDM audio driver for the StarFive JH7110 SoC. The
first patch adds device tree binding for TDM module. The second patch
adds tdm driver support for JH7110 SoC. The last patch adds device tree
node and pins configuration of tdm to JH7110 dts.
The series has been tested on the VisionFive 2 board by plugging an
audio expansion board.
For more information of audio expansion board, you can take a look
at the following webpage:
https://wiki.seeedstudio.com/ReSpeaker_2_Mics_Pi_HAT/
Add mt8188 and mt8186 .dbg_dump callback to print some information when
DSP panic occurs.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230601034939.15802-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch is to manage HSD feature for power saving. The detail is to
disable HSD feature after the headset detection is done. When the jack
is inserted, the HSD feature will be enabled again.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20230531075334.168637-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_get_playback_capture() (A) returns number of substreams for
playback/capture, and then, we can use playback/capture_only flag (X)(Y).
(A) static int soc_get_playback_capture(...)
{
...
(X) if (dai_link->playback_only) {
(*) *playback = 1;
*capture = 0;
}
(Y) if (dai_link->capture_only) {
*playback = 0;
(*) *capture = 1;
}
...
}
But this flag should not have effect to opposite side stream (*).
This patch tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87sfbezlq8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_get_playback_capture() (A) returns number of substreams for
playback/capture (B).
(A) static int soc_get_playback_capture(...,
(B) int *playback, int *capture)
{
...
for_each_xxx(...) {
if (xxx)
return -EINVAL;
=> *playback = 1;
...
=> *capture = 1;
...
}
...
}
But, it is directly updating playback/capture which is the result of this
function even though it might be error. It should be updated in case of
succeed only. This patch updates it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87ttvuzlqe.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_get_playback_capture() (A) checks dai_link status, and indicate error
if it was not matching (B).
(A) static int soc_get_playback_capture(...)
{
...
^ if (dai_link->dynamic && dai_link->num_cpus > 1) {
| dev_err(rtd->dev,
(B) "DPCM doesn't support Multi CPU for Front-Ends yet\n");
| return -EINVAL;
v }
...
}
We can use 100 char for 1 line today. This patch cleanup error code line.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87v8gazlqk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_get_playback_capture() (A) is using rtd->dai_link->xxx everywhere.
Because of that, 1 line is unnecessarily long and not readable.
(A) static int soc_get_playback_capture(...)
{
if (rtd->dai_link->dynamic ...) {
^^^^^^^^^^^^^
...
} else {
int cpu_capture = rtd->dai_link->c2c_params ?
^^^^^^^^^^^^^
...
}
if (rtd->dai_link->playback_only) {
^^^^^^^^^^^^^
...
}
...
}
This patch uses variable "dai_link" to be clear code.
Nothing changes the meanings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87wn0qzlqp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_get_playback_capture() (A) returns number of substreams for
playback/capture (B).
ASoC will probe the Sound Card and mapps CPU<->Codec pair.
(A) static int soc_get_playback_capture(...,
(B) int *playback, int *capture)
{
...
if (rtd->dai_link->playback_only) {
*playback = 1;
*capture = 0;
}
if (rtd->dai_link->capture_only) {
*playback = 0;
*capture = 1;
}
(C)
return 0;
}
But it might be no playback no capture if it returns playback=0, capture=0.
It is very difficult to notice about it. This patch indicates error at (C)
then.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87y1l6zlqx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This patch series handles a few issues related to the ES8316 audio
codec, discovered while doing some testing on the Rock 5B board.
When using the codec through the generic audio graph card, there are at
least two calls of es8316_set_dai_sysclk(), with the effect of limiting
the allowed sample rates according to the MCLK/LRCK ratios supported by
the codec:
1. During audio card setup, to set the initial MCLK - see
asoc_simple_init_dai().
2. Before opening a stream, to update MCLK, according to the stream
sample rate and the multiplication factor - see
asoc_simple_hw_params().
In some cases the initial MCLK might be set to a frequency that doesn't
match any of the supported ratios, e.g. 12287999 instead of 12288000,
which is only 1 Hz below the supported clock, as that is what the
hardware reports. This creates an empty list of rate constraints, which
is further passed to snd_pcm_hw_constraint_list() via
es8316_pcm_startup(), and causes the following error on the very first
access of the sound card:
$ speaker-test -D hw:Analog,0 -F S16_LE -c 2 -t wav
Broken configuration for playback: no configurations available: Invalid argument
Setting of hwparams failed: Invalid argument
Note that all subsequent retries succeed thanks to the updated MCLK set
at point 2 above, which uses a computed frequency value instead of a
reading from the hardware registers. Normally this would have mitigated
the issue, but es8316_pcm_startup() executes before the 2nd call to
es8316_set_dai_sysclk(), hence it cannot make use of the updated
constraints.
Since es8316_pcm_hw_params() performs anyway a final validation of MCLK
against the stream sample rate and the supported MCLK/LRCK ratios, fix
the issue by ensuring that sysclk_constraints list is only set when at
least one supported sample rate is autodetected by the codec.
Fixes: b8b88b7087 ("ASoC: add es8316 codec driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230530181140.483936-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The following error occurs when trying to restore a previously saved
ALSA mixer state (tested on a Rock 5B board):
$ alsactl --no-ucm -f /tmp/asound.state store hw:Analog
$ alsactl --no-ucm -I -f /tmp/asound.state restore hw:Analog
alsactl: set_control:1475: Cannot write control '2:0:0:ALC Capture Target Volume:0' : Invalid argument
According to ES8316 datasheet, the register at address 0x2B, which is
related to the above mixer control, contains by default the value 0xB0.
Considering the corresponding ALC target bits (ALCLVL) are 7:4, the
control is initialized with 11, which is one step above the maximum
value allowed by the driver:
ALCLVL | dB gain
-------+--------
0000 | -16.5
0001 | -15.0
0010 | -13.5
.... | .....
0111 | -6.0
1000 | -4.5
1001 | -3.0
1010 | -1.5
.... | .....
1111 | -1.5
The tests performed using the VU meter feature (--vumeter=TYPE) of
arecord/aplay confirm the specs are correct and there is no measured
gain if the 1011-1111 range would have been mapped to 0 dB:
dB gain | VU meter %
--------+-----------
-6.0 | 30-31
-4.5 | 35-36
-3.0 | 42-43
-1.5 | 50-51
0.0 | 50-51
Increment the max value allowed for ALC Capture Target Volume control,
so that it matches the hardware default. Additionally, update the
related TLV to prevent an artificial extension of the dB gain range.
Fixes: b8b88b7087 ("ASoC: add es8316 codec driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230530181140.483936-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The topology file and the machine driver rely on common definitions
for the dailink stream_name. To avoid any backwards-compatibility
problems, the machine driver stream names are set in stone and cannot
be modified.
This is problematic when we try to name some of the topology widgets
after the stream_name, since the widget name is limited to 44
characters
tools/include/uapi/sound/asound.h:#define SNDRV_CTL_ELEM_ID_NAME_MAXLEN 44
Existing examples include "Analog Playback and Capture" for HDaudio
dailinks, which leaves less than 20 chars to identify widgets/controls
with a meaningful name.
Since the 44-char limit is part of the UAPI definitions, we assumed
there is no way to increase it.
This patchset suggests instead a partial match which allows topology
files to use a shorter stream_name, which in turn allows for
self-explanatory widget names that comply with the 44-char limit.
This should not break any existing setup but with the introduction of
a partial match new dailinks should be named carefully to avoid
confusions between e.g. 'link1' and 'link10'. The last patch fixes
such an issue in the 'nocodec' test topology used by Intel.
With a common kernel config for nocodec and codec modes, the number of DAI
drivers will be set to 15 for nocodec as well. So adjust this when set
the machine params for the nocodec mode if the debug flag is set.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230526204149.456068-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This allows setting shorter names for the widget stream names in
topology. For example, in the case of HDA Analog DAI link, the stream
name is "Analog Playback and Capture". But it is enough to match "Analog"
in the DAI link stream name with a widget's stream name. This is needed
to set more meaningful names for the DAI widgets using the stream name
in topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230526204149.456068-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This allows for setting shorter link names in topology. For example,
for the HDA Analog DAI link, just "Analog" would suffice instead of
"Analog Playback and Capture"
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230526204149.456068-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use pcm_for_each_format for the PCM format iteration and fix the
following sparse warnings.
sound/soc/ti/davinci-mcasp.c:1336:26: sparse: warning: restricted snd_pcm_format_t degrades to integer
sound/soc/ti/davinci-mcasp.c:1358:26: sparse: warning: restricted snd_pcm_format_t degrades to integer
sound/soc/ti/davinci-mcasp.c:1438:26: sparse: warning: restricted snd_pcm_format_t degrades to integer
No functional changes.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Link: https://lore.kernel.org/r/20230519211636.3699-1-minhuadotchen@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have SOF and generic ACP support enabled for Vangogh platform
on some machines. Since we have same PCI id used for probing,
add check for machine configuration flag to avoid conflict with
newer pci drivers. Such machine flag has been initialized via
dmi match on few Vangogh based machines. If no flag is
specified probe and register older platform device.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20230530110802.674939-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mt8188 dai driver and specify of_machine to support mt8188 audio.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230523025933.30494-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add 4.8Mhz 9.6Mhz and 19.2MHz SCLK values
for MCLK 12MHz and 12.288MHz requested by Intel.
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230524125236.57149-1-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from David Rau <David.Rau.opensource@dm.renesas.com>:
This patchset adds the support of DA7219 Jack insertion detection
polarity selection.
The first patch replaces the old txt binding with a new schema binding.
The second patch adds `dlg,jack-ins-det-pty` property for Jack
insertion detection polarity selection.
The last patch adds the driver support for this topic.
The series has been verified on the DA7219 development kit.
Merge series from Daniel Baluta <daniel.baluta@oss.nxp.com>:
This patch series provides better handling of cases where sending
a data blob to FW results in a validation error.
In this case we restore to the last good known value instead of keeping
the data that firwmare rejected.
Merge series from Trevor Wu <trevor.wu@mediatek.com>:
The patch series includes a kselftest fix and changes for extending
driver capability to support more use cases.
Merge series from Claudiu Beznea <claudiu.beznea@microchip.com>:
Series removes the pm_runtime.h inclusion in files where
APIs exported though pm_runtime.h are not used. In case
of files that make use of pm.h which comes form pm_runtime.h
added patch 2/2.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The following series will enable multicore support on MTL platforms similarly
to other Intel platforms.
The TGL patch is included to simplify the core_put implementation.
Multicore support can be enabled by updated topologies, with current set of
tplg files this series is not introducing any runtime change.
Originally, lineout playback source can only be DAC_3RD. Some SoC
masters only support stereo MTKAIF outputs, so lineout path can't be
used in such case.
MTKAIF connections are as follows.
MOSI0 -> DAC_L
MOSI1 -> DAC_R
MOSI2 -> DAC_3rd
In the patch, lineout playback source can be chosen between DAC_L and
DAC_3rd, so sound can be outputted via lineout even though SoC only
supports stereo MTKAIF outputs.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230508071532.21665-5-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
kselftest tries to read/write the default value. The default register
value of playback gain is 0x1F(mute), but max gain we specified is 0x12.
The range of the control is 0x0~0x12 and mute(0x1F) is only used in the
driver internally. To solve the problem, implement a new callback
mt6359_get_playback_volsw to report user configured volume instead of
the register value.
In addition, update max of "Headset Volume" to 0x12, so it can match the
maximum seen on latest data sheet.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230508071532.21665-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are three output data pins MISO0, MISO1 and MISO2 for mt6359.
UL_SRC should be enabled when MISO0 or MISO1 is used, and UL_SRC_34
should be enabled when MISO2 is used.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230508071532.21665-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function is improved in the way that if the firmware returns a
validation error on the newly sent bytes, then the kernel will
automatically restore to the old bytes value for a given kcontrol.
This way, if the firmware rejects a data blob then the kernel will also
reject it, instead of saving it for the next suspend/resume cycle. The
old behaviour is that the kernel would save it anyway and on next
firmware boot it would apply the previously-rejected configuration,
leading to errors during playback.
Additionally, the function also saves previously validated
configurations, so that if the firmware does end up rejecting a new
bytes value the kernel can send an old, previously-valid configuration.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230503081049.73847-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function is improved in the way that if the firmware returns a
validation error on the newly sent bytes, then the kernel will
automatically restore to the old bytes value for a given kcontrol.
This way, if the firmware rejects a data blob then the kernel will also
reject it, instead of saving it for the next suspend/resume cycle. The
old behaviour is that the kernel would save it anyway and on next
firmware boot it would apply the previously-rejected configuration,
leading to errors during playback.
Additionally, the function also saves previously validated
configurations, so that if the firmware does end up rejecting a new
bytes value the kernel can send an old, previously-valid configuration.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230503081049.73847-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support of selecting insertion detection polarity
- Default polarity (Low)
- Inverted polarity (High)
Correct the keywords of parsing `dlg,jack-det-rate`
bases on the new DT binding.
Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20230523161821.4260-4-David.Rau.opensource@dm.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hda_ipc4_pre_trigger() has two issues:
1. In the default case, we are returning without unlocking the mutex.
2. In case SNDRV_PCM_TRIGGER_STOP: when ret is less than zero it goes
to out, unlocks but returns zero instead of a negative value.
Fix this by changing the final return value to 'ret' instead of zero,
and initialize 'ret' to zero in the start of the function.
Fixes: 225f37b578 ("ASoC: SOF: ipc4-pcm: reset all pipelines during FE DAI hw_free")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230519064404.1659637-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The return value from the call to sof_ipc4_get_valid_bits() is int.
However, the return value is being assigned to an unsigned
int variable 'out_ref_valid_bits', so making it an int.
Eliminate the following warning:
./sound/soc/sof/ipc4-topology.c:1537:6-24: WARNING: Unsigned expression compared with zero: out_ref_valid_bits < 0
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4985
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230516081116.71370-1-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Firmware may do context saving before powering off primary core, so driver
needs to send ipc msg by set_core_state. In IPC4 path, firmware needs to
save current context to IMR before powering off primary core. Firmware
does nothing for set_core_state message in IPC3 path. So IPC4 and IPC3
can share the same operation sequence.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230523103217.20412-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In core_get case, driver can power up primary core and don't need to send
ipc message to fw. Non-primary core should be powered up by fw with ipc
message.
In core_put case, driver should first send ipc message to fw to disable dsp
core then power down primary core if the target is primary core.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230523103217.20412-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not include pm_runtime.h header in files where runtime PM support is
not implemented. Use pm.h instead as suspend to RAM specific
implementation is available.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230517094903.2895238-3-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not include pm_runtime.h header in files where APIs exported by
pm_runtime.h are not used.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> # for omap-mcbsp-st.c
Link: https://lore.kernel.org/r/20230517094903.2895238-2-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding pre-charge actions to make FEPGA power stable faster. It
improve the recording quality at the beginning. Thus, it is also
meaningfully to decrease the final adc delay time.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20230523083303.98436-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
Series of patches cleaning up error messages when loading topology. In
few places instead of logging in place of failure message is logged in
caller. Additionally there are places where both caller and failing
function log error, leading to unnecessary logs. Clean all of the above
up.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The MOD_INIT_INSTANCE message contains a CPC (Cycles Per Chunk/processing unit)
parameter.
This CPC value is used by the firmware to calculate the total cycles needed by
the enabled module instances and based on this it can decide to set the
frequency of the DSP core(s).
The manifest section of the firmware image contains a module configuration
section, where a per module table of configurations are listed with measured
CPC values as triplet of IBS/IBS/CPC (Input/Output buffer size - corresponding
to the selected audio format).
In case the CPC value is 0 (missing from the manifest or the
configuration cannot be matched) the firmware will force the DSP cores
to maximum speed to avoid audio glitches due to starvation. In these
cases the kernel will print a warning message to let the SOF developers
know about the gap and provide information to correct it with a firmware
update.
Kernel coding guidelines recommend to not split string unnecessarily.
While at it adapt the other print present in the function to 100
characters line limit.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230519195611.4068853-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify code by logging any errors in function that does the actual
work instead of doing so in its callers.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230519195611.4068853-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The manifest's firmware module configuration section contains the measured
CPC values along with a matching IBS/OBS values.
The CPC can be looked up by looking for a matching IBS/OBS entry.
In case of multiple matches we will use the highest CPC value.
If there is no mod_cfg or no CPC value (all 0) or no match was found then
print warning message and use 0 as CPC value.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stop parsing the CPC value from topology to module_base_cfg.
The CPC value is only set for few modules in topology which makes the CPC
handling inconsistent.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename sof_ipc4_update_pipeline_mem_usage() to
sof_ipc4_update_resource_usage() in order to be re-usable for generic
resource storage, calculation of a module, like CPC adjustment.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Save a pointer to the firmware module configuration area in
sof_ipc4_fw_module struct for later use.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The bss_size is only set, but not used by the code, remove it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
First two patches are bugfixes.
Third patch skips the overhead of rebooting the amp after applying
firmware files when we know that it isn't necessary.
If the device is in secure mode it's unnecessary to send a SHUTDOWN and
SYSTEM_RESET around the firmware download. It could only be patching
insecure tunings. A tuning patch doesn't need a SHUTDOWN and only needs
a REINIT afterwards. This will reduce the overhead of exiting system
suspend in secure mode.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/Message-Id: <20230518150250.1121006-4-rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SoundWire bus accesses must be performed under the guard of a pm_runtime
request, in this case the write was being performed just after the
request had been put() and so the bus could not be guaranteed to be
available.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/Message-Id: <20230518150250.1121006-3-rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Each time we go through dsp_work() it does a devm_kasprintf() to
allocate memory to hold the part name string. It's not strictly a memory
leak because devm will free it all if the driver is removed. But we keep
allocating more and more memory to hold the same string.
Move the allocation so that it is performed after the version and
secured state information is gathered and handle allocation errors.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/Message-Id: <20230518150250.1121006-2-rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Paweł Anikiel <pan@semihalf.com>:
The Google Chameleon v3 is a device made for testing audio and video
paths of other devices. This patchset adds support for ASoC audio on
this device. It has two audio sources: HDMI audio from the it68051 chip
(RX only), and analog audio from the ssm2603 chip (RX and TX).
The patchset adds the ASoC platform and codec drivers.
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Many SoundWire CODEC drivers store the device status in a member
variable in the driver data but never reference this, and in any case
the SoundWire core stores this information for drivers so it would be
redundant even if used.
Function jack_kctl_name_gen() will remove the redundant " Jack" from
the name, if present, and then it will add it back, so that all of
the controls are named "(pin-name) Jack".
Remove " Jack" from the Headphone pin name to spare some CPU cycles.
This commit brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com
Link: https://lore.kernel.org/r/20230517151516.343037-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-13-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-12-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-11-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
These IDs are for AD102, AD103, AD104, AD106, and AD107 gpus with
audio functions that are largely similar to the existing ones.
Tested audio using gnome-settings, over HDMI, DP-SST and DP-MST
connections on AD106 gpu.
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230517090736.15088-1-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Two functions are defined and used in pcm_oss.c but also optionally
used from io.c, with an optional prototype. If CONFIG_SND_PCM_OSS_PLUGINS
is disabled, this causes a warning as the functions are not static
and have no prototype:
sound/core/oss/pcm_oss.c:1235:19: error: no previous prototype for 'snd_pcm_oss_write3' [-Werror=missing-prototypes]
sound/core/oss/pcm_oss.c:1266:19: error: no previous prototype for 'snd_pcm_oss_read3' [-Werror=missing-prototypes]
Avoid this by making the prototypes unconditional.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516195046.550584-2-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_cs46xx_download_image() was originally called from dsp_spos.c, but
is now local to cs46xx_lib.c. Mark it as 'static' to avoid a warning
about it lacking a declaration, and '__maybe_unused' to avoid a warning
about it being unused when CONFIG_SND_CS46XX_NEW_DSP is disabled:
sound/pci/cs46xx/cs46xx_lib.c:534:5: error: no previous prototype for 'snd_cs46xx_download_image'
Fixes: 89f157d9e6 ("[ALSA] cs46xx - Fix PM resume")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516195046.550584-1-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
use snd_pcm_format_t instead of unsigned int to fix
the following sparse warnings:
sound/soc/tegra/tegra210_adx.c:125:14: sparse: warning: restricted snd_pcm_format_t degrades to integer
sound/soc/tegra/tegra210_adx.c:128:14: sparse: warning: restricted snd_pcm_format_t degrades to integer
sound/soc/tegra/tegra210_adx.c:131:14: sparse: warning: restricted snd_pcm_format_t degrades to integer
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com
Link: https://lore.kernel.org/r/20230516223700.185569-1-minhuadotchen@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org
get_line_out_pfx() may trigger an Oops by overflowing the static array
with more than 8 channels. This was reported for MacBookPro 12,1 with
Cirrus codec.
As a workaround, extend for the 9.1 channels and also fix the
potential Oops by unifying the code paths accessing the same array
with the proper size check.
Reported-by: Olliver Schinagl <oliver@schinagl.nl>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/64d95eb0-dbdb-cff8-a8b1-988dc22b24cd@schinagl.nl
Link: https://lore.kernel.org/r/20230516184412.24078-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
More fixes that came in since the merge window, the bulk of which are
for the SOF code, I suspect as a result of the wide usage, active
development and large code size rather than huge quality problems.
There's also a couple of MAINTAINERS updates and some new device quirks.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRjoe4ACgkQJNaLcl1U
h9BNiwf/SRv0HUMuaLHV/a7TUoLyFZbYIR7OoYNWZcGcNb01C12sEcjaFm38p7wD
sjzAAECQyfLgulLIaqc68lcOzF5+QfM28Gqfhw9mKVf9lLQaOvgzJfZ0gZG/CIRk
8MpqsFYF+XRsvmJy8xxS8PMaOCiBMJd31EFHt5dYr/rXJMmJnK7jwpGW5Gsf1o/N
naISPkeDIbjsmSalTyBXOfgebS/tWvcW4/Gsx6Rs37kH8e1xP72gOFjRy5bQXiVk
3o0eHVK7kw7oUacBUjAgxn1mWkeyhSFl235Nh6R89L6XDNeYr254SRFd3Y9kxeDq
Wx/H3RLjNhr8yA12XGJhrQ4/bK6Ktw==
=dYo0
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.4-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.4
More fixes that came in since the merge window, the bulk of which are
for the SOF code, I suspect as a result of the wide usage, active
development and large code size rather than huge quality problems.
There's also a couple of MAINTAINERS updates and some new device quirks.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Improve the logic to account for the current restrictions in topology while
making it extensible for future topology modifications.
The current topology definitions assume that input/output formats come in pairs.
For example even if there's only 1 output format for a module, we add 3 output
formats to match that of the input format count with the same parameters.
This is unnecessary but we have to deal with it until the topologies are
modified. Additionally, choosing the input/output audio format should
depend only on the pipeline params or the runtime FE hw_params depending
on where the module is in the pipeline.
This series modifies the logic for selection based on this and removes
unnecessary dependencies between the input and output formats.
Merge series from Trevor Wu <trevor.wu@mediatek.com>:
The series of patches consists of four major changes.
First, remove redundant supply for ADDA DAI dirver. Second, revise ETDM
control including APLL dynamic switch via DAPM, so APLL can be enabled
when it is really required. Third, update AFE probe function. Bus
protection change was dropped at the previous patch because the dependent
change was not accepted at that time. Finally, correct some binding errors
and add required clocks.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Do not reset pipelines during the stop/suspend triggers in the BE DAI
ops as the BE DAI pipeline needs to be left in the PAUSED state. It should
only be reset during hw_free. This simplification is already done for
the FE pipelines and the DAI trigger only toggles the states between
PAUSED and RUNNING.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The HDAudio support has not changed much since CometLake/2019: the
code was reshuffled for IPC4 support and we used hdac_hda for external
and Display Audio codec, but the hda-dai code was only used for
HDAudio codecs.
In the LunarLake architecture, all endpoints (HDaudio, SSP, DMIC,
SoundWire) are handled with the HDaudio DMA, which requires us to
revisit the definitions of HDA_LINK, and remove the mutual exclusion
between NOCODEC and HDA_LINK: we do want the ability to test SSP/DMIC
in NOCODEC mode even with an HDA DMA.
This code change exposed a number of issues, with a useless .prepare
callback, a DAI number mismatch and the need to support SoundWire
which is handled by a different component in
drivers/soundwire/intel_ace2.c.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
With additional testing with multiple links and multiple DAI types, we
found a couple of mistakes with refcounts, base address, missing
initialization.
A new helper was also added due to a change in the SoundWire
programming sequences, with the host driver in charge of setting up
the DMA channel mapping instead of the firmware.
Do not reset pipelines during the stop/suspend triggers in the BE DAI
ops as the BE DAI pipeline needs to be left in the PAUSED state. It should
only be reset during hw_free. This simplification is already done for
the FE pipelines and the DAI trigger only toggles the states between
PAUSED and RUNNING.
But because the FE DAI hw_free is invoked first and all the pipelines are
freed during this op, we need to make sure that the BE DAI pipeline also
gets reset before it is freed. So do not skip the pipelines that have the
skip_during_fe_trigger flag set when resetting pipelines.
Also, because the pipeline state changes are split between the FE and BE
DAI ops now, protect the BE DAI pipeline state changes with the
pipeline_state_mutex as well.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515112022.30297-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Introduce a separate op implementation for get_hext_stream() for IPC4.
This op will also be used to set the skip_during_fe_trigger flag for the
BE DAI pipeline. With this change, we can remove the flag setting in
sof_ipc4_dai_config() which will further simplify support for
DMIC/SSP/Soundwire in the LunarLake platform.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515112022.30297-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
