Commit Graph

77 Commits

Author SHA1 Message Date
Rik van Riel
8c38b705b4 silence nfscache allocation warnings with kvzalloc
silence nfscache allocation warnings with kvzalloc

Currently nfsd_reply_cache_init attempts hash table allocation through
kmalloc, and manually falls back to vzalloc if that fails. This makes
the code a little larger than needed, and creates a significant amount
of serial console spam if you have enough systems.

Switching to kvzalloc gets rid of the allocation warnings, and makes
the code a little cleaner too as a side effect.

Freeing of nn->drc_hashtbl is already done using kvfree currently.

Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-09-25 18:01:28 -04:00
J. Bruce Fields
c25bf185e5 nfsd: safer handling of corrupted c_type
This can only happen if there's a bug somewhere, so let's make it a WARN
not a printk.  Also, I think it's safest to ignore the corruption rather
than trying to fix it by removing a cache entry.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-06-03 11:12:32 -04:00
J. Bruce Fields
027690c75e nfsd4: make drc_slab global, not per-net
I made every global per-network-namespace instead.  But perhaps doing
that to this slab was a step too far.

The kmem_cache_create call in our net init method also seems to be
responsible for this lockdep warning:

[   45.163710] Unable to find swap-space signature
[   45.375718] trinity-c1 (855): attempted to duplicate a private mapping with mremap.  This is not supported.
[   46.055744] futex_wake_op: trinity-c1 tries to shift op by -209; fix this program
[   51.011723]
[   51.013378] ======================================================
[   51.013875] WARNING: possible circular locking dependency detected
[   51.014378] 5.2.0-rc2 #1 Not tainted
[   51.014672] ------------------------------------------------------
[   51.015182] trinity-c2/886 is trying to acquire lock:
[   51.015593] 000000005405f099 (slab_mutex){+.+.}, at: slab_attr_store+0xa2/0x130
[   51.016190]
[   51.016190] but task is already holding lock:
[   51.016652] 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500
[   51.017266]
[   51.017266] which lock already depends on the new lock.
[   51.017266]
[   51.017909]
[   51.017909] the existing dependency chain (in reverse order) is:
[   51.018497]
[   51.018497] -> #1 (kn->count#43){++++}:
[   51.018956]        __lock_acquire+0x7cf/0x1a20
[   51.019317]        lock_acquire+0x17d/0x390
[   51.019658]        __kernfs_remove+0x892/0xae0
[   51.020020]        kernfs_remove_by_name_ns+0x78/0x110
[   51.020435]        sysfs_remove_link+0x55/0xb0
[   51.020832]        sysfs_slab_add+0xc1/0x3e0
[   51.021332]        __kmem_cache_create+0x155/0x200
[   51.021720]        create_cache+0xf5/0x320
[   51.022054]        kmem_cache_create_usercopy+0x179/0x320
[   51.022486]        kmem_cache_create+0x1a/0x30
[   51.022867]        nfsd_reply_cache_init+0x278/0x560
[   51.023266]        nfsd_init_net+0x20f/0x5e0
[   51.023623]        ops_init+0xcb/0x4b0
[   51.023928]        setup_net+0x2fe/0x670
[   51.024315]        copy_net_ns+0x30a/0x3f0
[   51.024653]        create_new_namespaces+0x3c5/0x820
[   51.025257]        unshare_nsproxy_namespaces+0xd1/0x240
[   51.025881]        ksys_unshare+0x506/0x9c0
[   51.026381]        __x64_sys_unshare+0x3a/0x50
[   51.026937]        do_syscall_64+0x110/0x10b0
[   51.027509]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   51.028175]
[   51.028175] -> #0 (slab_mutex){+.+.}:
[   51.028817]        validate_chain+0x1c51/0x2cc0
[   51.029422]        __lock_acquire+0x7cf/0x1a20
[   51.029947]        lock_acquire+0x17d/0x390
[   51.030438]        __mutex_lock+0x100/0xfa0
[   51.030995]        mutex_lock_nested+0x27/0x30
[   51.031516]        slab_attr_store+0xa2/0x130
[   51.032020]        sysfs_kf_write+0x11d/0x180
[   51.032529]        kernfs_fop_write+0x32a/0x500
[   51.033056]        do_loop_readv_writev+0x21d/0x310
[   51.033627]        do_iter_write+0x2e5/0x380
[   51.034148]        vfs_writev+0x170/0x310
[   51.034616]        do_pwritev+0x13e/0x160
[   51.035100]        __x64_sys_pwritev+0xa3/0x110
[   51.035633]        do_syscall_64+0x110/0x10b0
[   51.036200]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   51.036924]
[   51.036924] other info that might help us debug this:
[   51.036924]
[   51.037876]  Possible unsafe locking scenario:
[   51.037876]
[   51.038556]        CPU0                    CPU1
[   51.039130]        ----                    ----
[   51.039676]   lock(kn->count#43);
[   51.040084]                                lock(slab_mutex);
[   51.040597]                                lock(kn->count#43);
[   51.041062]   lock(slab_mutex);
[   51.041320]
[   51.041320]  *** DEADLOCK ***
[   51.041320]
[   51.041793] 3 locks held by trinity-c2/886:
[   51.042128]  #0: 000000001f55e152 (sb_writers#5){.+.+}, at: vfs_writev+0x2b9/0x310
[   51.042739]  #1: 00000000c7d6c034 (&of->mutex){+.+.}, at: kernfs_fop_write+0x25b/0x500
[   51.043400]  #2: 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500

Reported-by: kernel test robot <lkp@intel.com>
Fixes: 3ba75830ce "drc containerization"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-06-01 17:44:45 -04:00
Chuck Lever
0b175b1864 NFSD: Add tracepoints to NFSD's duplicate reply cache
Try to capture DRC failures.

Two additional clean-ups:
- Introduce Doxygen-style comments for the main entry points
- Remove a dprintk that fires for an allocation failure. This was
  the only dprintk in the REPCACHE class.

Reported-by: kbuild test robot <lkp@intel.com>
[ cel: force typecast for display of checksum values ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-05-20 17:30:34 -04:00
He Zhe
78e70e780b nfsd4: Fix kernel crash when reading proc file reply_cache_stats
reply_cache_stats uses wrong parameter as seq file private structure and
thus causes the following kernel crash when users read
/proc/fs/nfsd/reply_cache_stats

BUG: kernel NULL pointer dereference, address: 00000000000001f9
PGD 0 P4D 0
Oops: 0000 [#3] SMP PTI
CPU: 6 PID: 1502 Comm: cat Tainted: G      D           5.3.0-rc3+ #1
Hardware name: Intel Corporation Broadwell Client platform/Basking Ridge, BIOS BDW-E2R1.86C.0118.R01.1503110618 03/11/2015
RIP: 0010:nfsd_reply_cache_stats_show+0x3b/0x2d0
Code: 41 54 49 89 f4 48 89 fe 48 c7 c7 b3 10 33 88 53 bb e8 03 00 00 e8 88 82 d1 ff bf 58 89 41 00 e8 eb c5 85 00 48 83 eb 01 75 f0 <41> 8b 94 24 f8 01 00 00 48 c7 c6 be 10 33 88 4c 89 ef bb e8 03 00
RSP: 0018:ffffaa520106fe08 EFLAGS: 00010246
RAX: 000000cfe1a77123 RBX: 0000000000000000 RCX: 0000000000291b46
RDX: 000000cf00000000 RSI: 0000000000000006 RDI: 0000000000291b28
RBP: ffffaa520106fe20 R08: 0000000000000006 R09: 000000cfe17e55dd
R10: ffffa424e47c0000 R11: 000000000000030b R12: 0000000000000001
R13: ffffa424e5697000 R14: 0000000000000001 R15: ffffa424e5697000
FS:  00007f805735f580(0000) GS:ffffa424f8f80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000001f9 CR3: 00000000655ce005 CR4: 00000000003606e0
Call Trace:
 seq_read+0x194/0x3e0
 __vfs_read+0x1b/0x40
 vfs_read+0x95/0x140
 ksys_read+0x61/0xe0
 __x64_sys_read+0x1a/0x20
 do_syscall_64+0x4d/0x120
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f805728b861
Code: fe ff ff 50 48 8d 3d 86 b4 09 00 e8 79 e0 01 00 66 0f 1f 84 00 00 00 00 00 48 8d 05 d9 19 0d 00 8b 00 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 c3 66 0f 1f 44 00 00 48 83 ec 28 48 89 54
RSP: 002b:00007ffea1ce3c38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f805728b861
RDX: 0000000000020000 RSI: 00007f8057183000 RDI: 0000000000000003
RBP: 00007f8057183000 R08: 00007f8057182010 R09: 0000000000000000
R10: 0000000000000022 R11: 0000000000000246 R12: 0000559a60e8ff10
R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
Modules linked in:
CR2: 00000000000001f9
---[ end trace 01613595153f0cba ]---
RIP: 0010:nfsd_reply_cache_stats_show+0x3b/0x2d0
Code: 41 54 49 89 f4 48 89 fe 48 c7 c7 b3 10 33 88 53 bb e8 03 00 00 e8 88 82 d1 ff bf 58 89 41 00 e8 eb c5 85 00 48 83 eb 01 75 f0 <41> 8b 94 24 f8 01 00 00 48 c7 c6 be 10 33 88 4c 89 ef bb e8 03 00
RSP: 0018:ffffaa52004b3e08 EFLAGS: 00010246
RAX: 0000002bab45a7c6 RBX: 0000000000000000 RCX: 0000000000291b4c
RDX: 0000002b00000000 RSI: 0000000000000004 RDI: 0000000000291b28
RBP: ffffaa52004b3e20 R08: 0000000000000004 R09: 0000002bab1c8c7a
R10: ffffa424e5500000 R11: 00000000000002a9 R12: 0000000000000001
R13: ffffa424e4475000 R14: 0000000000000001 R15: ffffa424e4475000
FS:  00007f805735f580(0000) GS:ffffa424f8f80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000001f9 CR3: 00000000655ce005 CR4: 00000000003606e0
Killed

Fixes: 3ba75830ce ("nfsd4: drc containerization")
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-16 13:36:55 -04:00
J. Bruce Fields
689d7ba489 nfsd: fix cleanup of nfsd_reply_cache_init on failure
The failure to unregister the shrinker results will result in corruption
when the nfsd_net is freed.

Also clean up the drc_slab while we're here.

Reported-by: syzbot+83a43746cebef3508b49@syzkaller.appspotmail.com
Fixes: db17b61765c2 ("nfsd4: drc containerization")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-03 17:52:09 -04:00
J. Bruce Fields
3ba75830ce nfsd4: drc containerization
The nfsd duplicate reply cache should not be shared between network
namespaces.

The most straightforward way to fix this is just to move every global in
the code to per-net-namespace memory, so that's what we do.

Still todo: sort out which members of nfsd_stats should be global and
which per-net-namespace.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-03 17:52:08 -04:00
J. Bruce Fields
b401170f6d nfsd: don't call nfsd_reply_cache_shutdown twice
The caller is cleaning up on ENOMEM, don't try to do it here too.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-03 17:52:08 -04:00
Arun KS
ca79b0c211 mm: convert totalram_pages and totalhigh_pages variables to atomic
totalram_pages and totalhigh_pages are made static inline function.

Main motivation was that managed_page_count_lock handling was complicating
things.  It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.

[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:47 -08:00
Trond Myklebust
736c6625de knfsd: Improve lookup performance in the duplicate reply cache using an rbtree
Use an rbtree to ensure the lookup/insert of an entry in a DRC bucket is
O(log(N)).

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-10-29 16:58:04 -04:00
Trond Myklebust
ed00c2f652 knfsd: Further simplify the cache lookup
Order the structure so that the key can be compared using memcmp().

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-10-29 16:58:04 -04:00
Trond Myklebust
76ecec2119 knfsd: Simplify NFS duplicate replay cache
Simplify the duplicate replay cache by initialising the preallocated
cache entry, so that we can use it as a key for the cache lookup.

Note that the 99.999% case we want to optimise for is still the one
where the lookup fails, and we have to add this entry to the cache,
so preinitialising should not cause a performance penalty.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-10-29 16:58:04 -04:00
Trond Myklebust
3e87da5145 knfsd: Remove dead code from nfsd_cache_lookup
The preallocated cache entry is always set to type RC_NOCACHE, and that
type isn't changed until we later call nfsd_cache_update().

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-10-29 16:58:04 -04:00
Linus Torvalds
b08fc5277a - Error path bug fix for overflow tests (Dan)
- Additional struct_size() conversions (Matthew, Kees)
 - Explicitly reported overflow fixes (Silvio, Kees)
 - Add missing kvcalloc() function (Kees)
 - Treewide conversions of allocators to use either 2-factor argument
   variant when available, or array_size() and array3_size() as needed (Kees)
 -----BEGIN PGP SIGNATURE-----
 Comment: Kees Cook <kees@outflux.net>
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAlsgVtMWHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJhsJEACLYe2EbwLFJz7emOT1KUGK5R1b
 oVxJog0893WyMqgk9XBlA2lvTBRBYzR3tzsadfYo87L3VOBzazUv0YZaweJb65sF
 bAvxW3nY06brhKKwTRed1PrMa1iG9R63WISnNAuZAq7+79mN6YgW4G6YSAEF9lW7
 oPJoPw93YxcI8JcG+dA8BC9w7pJFKooZH4gvLUSUNl5XKr8Ru5YnWcV8F+8M4vZI
 EJtXFmdlmxAledUPxTSCIojO8m/tNOjYTreBJt9K1DXKY6UcgAdhk75TRLEsp38P
 fPvMigYQpBDnYz2pi9ourTgvZLkffK1OBZ46PPt8BgUZVf70D6CBg10vK47KO6N2
 zreloxkMTrz5XohyjfNjYFRkyyuwV2sSVrRJqF4dpyJ4NJQRjvyywxIP4Myifwlb
 ONipCM1EjvQjaEUbdcqKgvlooMdhcyxfshqJWjHzXB6BL22uPzq5jHXXugz8/ol8
 tOSM2FuJ2sBLQso+szhisxtMd11PihzIZK9BfxEG3du+/hlI+2XgN7hnmlXuA2k3
 BUW6BSDhab41HNd6pp50bDJnL0uKPWyFC6hqSNZw+GOIb46jfFcQqnCB3VZGCwj3
 LH53Be1XlUrttc/NrtkvVhm4bdxtfsp4F7nsPFNDuHvYNkalAVoC3An0BzOibtkh
 AtfvEeaPHaOyD8/h2Q==
 =zUUp
 -----END PGP SIGNATURE-----

Merge tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull more overflow updates from Kees Cook:
 "The rest of the overflow changes for v4.18-rc1.

  This includes the explicit overflow fixes from Silvio, further
  struct_size() conversions from Matthew, and a bug fix from Dan.

  But the bulk of it is the treewide conversions to use either the
  2-factor argument allocators (e.g. kmalloc(a * b, ...) into
  kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a *
  b) into vmalloc(array_size(a, b)).

  Coccinelle was fighting me on several fronts, so I've done a bunch of
  manual whitespace updates in the patches as well.

  Summary:

   - Error path bug fix for overflow tests (Dan)

   - Additional struct_size() conversions (Matthew, Kees)

   - Explicitly reported overflow fixes (Silvio, Kees)

   - Add missing kvcalloc() function (Kees)

   - Treewide conversions of allocators to use either 2-factor argument
     variant when available, or array_size() and array3_size() as needed
     (Kees)"

* tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits)
  treewide: Use array_size in f2fs_kvzalloc()
  treewide: Use array_size() in f2fs_kzalloc()
  treewide: Use array_size() in f2fs_kmalloc()
  treewide: Use array_size() in sock_kmalloc()
  treewide: Use array_size() in kvzalloc_node()
  treewide: Use array_size() in vzalloc_node()
  treewide: Use array_size() in vzalloc()
  treewide: Use array_size() in vmalloc()
  treewide: devm_kzalloc() -> devm_kcalloc()
  treewide: devm_kmalloc() -> devm_kmalloc_array()
  treewide: kvzalloc() -> kvcalloc()
  treewide: kvmalloc() -> kvmalloc_array()
  treewide: kzalloc_node() -> kcalloc_node()
  treewide: kzalloc() -> kcalloc()
  treewide: kmalloc() -> kmalloc_array()
  mm: Introduce kvcalloc()
  video: uvesafb: Fix integer overflow in allocation
  UBIFS: Fix potential integer overflow in allocation
  leds: Use struct_size() in allocation
  Convert intel uncore to struct_size
  ...
2018-06-12 18:28:00 -07:00
Kees Cook
fad953ce0b treewide: Use array_size() in vzalloc()
The vzalloc() function has no 2-factor argument form, so multiplication
factors need to be wrapped in array_size(). This patch replaces cases of:

        vzalloc(a * b)

with:
        vzalloc(array_size(a, b))

as well as handling cases of:

        vzalloc(a * b * c)

with:

        vzalloc(array3_size(a, b, c))

This does, however, attempt to ignore constant size factors like:

        vzalloc(4 * 1024)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  vzalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  vzalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  vzalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  vzalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  vzalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  vzalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  vzalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  vzalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  vzalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  vzalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
  vzalloc(
-	sizeof(TYPE) * (COUNT_ID)
+	array_size(COUNT_ID, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(TYPE) * COUNT_ID
+	array_size(COUNT_ID, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(TYPE) * (COUNT_CONST)
+	array_size(COUNT_CONST, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(TYPE) * COUNT_CONST
+	array_size(COUNT_CONST, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(THING) * (COUNT_ID)
+	array_size(COUNT_ID, sizeof(THING))
  , ...)
|
  vzalloc(
-	sizeof(THING) * COUNT_ID
+	array_size(COUNT_ID, sizeof(THING))
  , ...)
|
  vzalloc(
-	sizeof(THING) * (COUNT_CONST)
+	array_size(COUNT_CONST, sizeof(THING))
  , ...)
|
  vzalloc(
-	sizeof(THING) * COUNT_CONST
+	array_size(COUNT_CONST, sizeof(THING))
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

  vzalloc(
-	SIZE * COUNT
+	array_size(COUNT, SIZE)
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  vzalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vzalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vzalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vzalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vzalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  vzalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  vzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  vzalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  vzalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  vzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  vzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  vzalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vzalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vzalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vzalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vzalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vzalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vzalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vzalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  vzalloc(C1 * C2 * C3, ...)
|
  vzalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants.
@@
expression E1, E2;
constant C1, C2;
@@

(
  vzalloc(C1 * C2, ...)
|
  vzalloc(
-	E1 * E2
+	array_size(E1, E2)
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Trond Myklebust
7e5d0e0de0 nfsd: Do not refuse to serve out of cache
Currently the knfsd replay cache appears to try to refuse replying to
retries that come within 200ms of the cache entry being created. That
makes limited sense in today's world of high speed TCP.

After a TCP disconnection, a client can very easily reconnect and retry
an rpc in less than 200ms.  If this logic drops that retry, however, the
client may be quite slow to retry again.  This logic is original to the
first reply cache implementation in 2.1, and may have made more sense
for UDP clients that retried much more frequently.

After this patch we will still drop on finding the original request
still in progress.  We may want to fix that as well at some point,
though it's less likely.

Note that svc_check_conn_limits is often the cause of those
disconnections.  We may want to fix that some day.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-05-11 15:48:57 -04:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Alexey Dobriyan
5b5e0928f7 lib/vsprintf.c: remove %Z support
Now that %z is standartised in C99 there is no reason to support %Z.
Unlike %L it doesn't even make format strings smaller.

Use BUILD_BUG_ON in a couple ATM drivers.

In case anyone didn't notice lib/vsprintf.o is about half of SLUB which
is in my opinion is quite an achievement.  Hopefully this patch inspires
someone else to trim vsprintf.c more.

Link: http://lkml.kernel.org/r/20170103230126.GA30170@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:47 -08:00
Jeff Layton
8f97514b42 nfsd: more robust allocation failure handling in nfsd_reply_cache_init
Currently, we try to allocate the cache as a single, large chunk, which
can fail if no big chunks of memory are available. We _do_ try to size
it according to the amount of memory in the box, but if the server is
started well after boot time, then the allocation can fail due to memory
fragmentation.

Fall back to doing a vzalloc if the kcalloc fails, and switch the
shutdown code to do a kvfree to handle freeing correctly.

Reported-by: Olaf Hering <olaf@aepfle.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-11-01 15:47:43 -04:00
Jeff Layton
3e80dbcda7 nfsd: remove recurring workqueue job to clean DRC
We have a shrinker, we clean out the cache when nfsd is shut down, and
prune the chains on each request. A recurring workqueue job seems like
unnecessary overhead. Just remove it.

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-11-10 09:25:51 -05:00
Julia Lawall
e79017ddce nfsd: drop null test before destroy functions
Remove unneeded NULL test.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@ expression x; @@
-if (x != NULL) {
  \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x);
  x = NULL;
-}
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-10-12 17:31:04 -04:00
Kinglong Mee
a68465c9cb NFSD: Error out when register_shrinker() fail
If register_shrinker() failed, nfsd will cause a NULL pointer access as,

[ 9250.875465] nfsd: last server has exited, flushing export cache
[ 9251.427270] BUG: unable to handle kernel NULL pointer dereference at           (null)
[ 9251.427393] IP: [<ffffffff8136fc29>] __list_del_entry+0x29/0xd0
[ 9251.427579] PGD 13e4d067 PUD 13e4c067 PMD 0
[ 9251.427633] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[ 9251.427706] Modules linked in: ip6t_rpfilter ip6t_REJECT bnep bluetooth xt_conntrack cfg80211 rfkill ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw btrfs xfs microcode ppdev serio_raw pcspkr xor libcrc32c raid6_pq e1000 parport_pc parport i2c_piix4 i2c_core nfsd(OE-) auth_rpcgss nfs_acl lockd sunrpc(E) ata_generic pata_acpi
[ 9251.428240] CPU: 0 PID: 1557 Comm: rmmod Tainted: G           OE 3.16.0-rc2+ #22
[ 9251.428366] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013
[ 9251.428496] task: ffff880000849540 ti: ffff8800136f4000 task.ti: ffff8800136f4000
[ 9251.428593] RIP: 0010:[<ffffffff8136fc29>]  [<ffffffff8136fc29>] __list_del_entry+0x29/0xd0
[ 9251.428696] RSP: 0018:ffff8800136f7ea0  EFLAGS: 00010207
[ 9251.428751] RAX: 0000000000000000 RBX: ffffffffa0116d48 RCX: dead000000200200
[ 9251.428814] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa0116d48
[ 9251.428876] RBP: ffff8800136f7ea0 R08: ffff8800136f4000 R09: 0000000000000001
[ 9251.428939] R10: 8080808080808080 R11: 0000000000000000 R12: ffffffffa011a5a0
[ 9251.429002] R13: 0000000000000800 R14: 0000000000000000 R15: 00000000018ac090
[ 9251.429064] FS:  00007fb9acef0740(0000) GS:ffff88003fa00000(0000) knlGS:0000000000000000
[ 9251.429164] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9251.429221] CR2: 0000000000000000 CR3: 0000000031a17000 CR4: 00000000001407f0
[ 9251.429306] Stack:
[ 9251.429410]  ffff8800136f7eb8 ffffffff8136fcdd ffffffffa0116d20 ffff8800136f7ed0
[ 9251.429511]  ffffffff8118a0f2 0000000000000000 ffff8800136f7ee0 ffffffffa00eb765
[ 9251.429610]  ffff8800136f7ef0 ffffffffa010e93c ffff8800136f7f78 ffffffff81104ac2
[ 9251.429709] Call Trace:
[ 9251.429755]  [<ffffffff8136fcdd>] list_del+0xd/0x30
[ 9251.429896]  [<ffffffff8118a0f2>] unregister_shrinker+0x22/0x40
[ 9251.430037]  [<ffffffffa00eb765>] nfsd_reply_cache_shutdown+0x15/0x90 [nfsd]
[ 9251.430106]  [<ffffffffa010e93c>] exit_nfsd+0x9/0x6cd [nfsd]
[ 9251.430192]  [<ffffffff81104ac2>] SyS_delete_module+0x162/0x200
[ 9251.430280]  [<ffffffff81013b69>] ? do_notify_resume+0x59/0x90
[ 9251.430395]  [<ffffffff816f2369>] system_call_fastpath+0x16/0x1b
[ 9251.430457] Code: 00 00 55 48 8b 17 48 b9 00 01 10 00 00 00 ad de 48 8b 47 08 48 89 e5 48 39 ca 74 29 48 b9 00 02 20 00 00 00 ad de 48 39 c8 74 7a <4c> 8b 00 4c 39 c7 75 53 4c 8b 42 08 4c 39 c7 75 2b 48 89 42 08
[ 9251.430691] RIP  [<ffffffff8136fc29>] __list_del_entry+0x29/0xd0
[ 9251.430755]  RSP <ffff8800136f7ea0>
[ 9251.430805] CR2: 0000000000000000
[ 9251.431033] ---[ end trace 080f3050d082b4ea ]---

Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-20 12:44:00 -04:00
Jeff Layton
4d152e2c9a sunrpc: add a generic rq_flags field to svc_rqst and move rq_secure to it
In a later patch, we're going to need some atomic bit flags. Since that
field will need to be an unsigned long, we mitigate that space
consumption by migrating some other bitflags to the new field. Start
with the rq_secure flag.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:21:20 -05:00
Trond Myklebust
ef9b16dc6d nfsd: Reorder nfsd_cache_match to check more powerful discriminators first
We would normally expect the xid and the checksum to be the best
discriminators. Check them before looking at the procedure number,
etc.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-17 12:00:13 -04:00
Trond Myklebust
89a26b3d29 nfsd: split DRC global spinlock into per-bucket locks
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-17 12:00:13 -04:00
Trond Myklebust
31e60f5222 nfsd: convert num_drc_entries to an atomic_t
...so we can remove the spinlocking around it.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-17 12:00:12 -04:00
Trond Myklebust
11acf6ef3b nfsd: Remove the cache_hash list
Now that the lru list is per-bucket, we don't need a second list for
searches.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-17 12:00:12 -04:00
Trond Myklebust
bedd4b61a4 nfsd: convert the lru list into a per-bucket thing
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-17 12:00:12 -04:00
Trond Myklebust
7142b98d9f nfsd: Clean up drc cache in preparation for global spinlock elimination
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-08-17 12:00:12 -04:00
Jeff Layton
b3d8d1284a nfsd: clean up sparse endianness warnings in nfscache.c
We currently hash the XID to determine a hash bucket to use for the
reply cache entry, which is fed into hash_32 without byte-swapping it.
Add __force to make sparse happy, and add some comments to explain
why.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-06-23 11:31:37 -04:00
Jeff Layton
1b19453d1c nfsd: don't halt scanning the DRC LRU list when there's an RC_INPROG entry
Currently, the DRC cache pruner will stop scanning the list when it
hits an entry that is RC_INPROG. It's possible however for a call to
take a *very* long time. In that case, we don't want it to block other
entries from being pruned if they are expired or we need to trim the
cache to get back under the limit.

Fix the DRC cache pruner to just ignore RC_INPROG entries.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-06-06 19:22:49 -04:00
Jeff Layton
a0ef5e1968 nfsd: don't try to reuse an expired DRC entry off the list
Currently when we are processing a request, we try to scrape an expired
or over-limit entry off the list in preference to allocating a new one
from the slab.

This is unnecessarily complicated. Just use the slab layer.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-12-11 11:27:04 -05:00
Jeff Layton
781c2a5a5f nfsd: when reusing an existing repcache entry, unhash it first
The DRC code will attempt to reuse an existing, expired cache entry in
preference to allocating a new one. It'll then search the cache, and if
it gets a hit it'll then free the cache entry that it was going to
reuse.

The cache code doesn't unhash the entry that it's going to reuse
however, so it's possible for it end up designating an entry for reuse
and then subsequently freeing the same entry after it finds it.  This
leads it to a later use-after-free situation and usually some list
corruption warnings or an oops.

Fix this by simply unhashing the entry that we intend to reuse. That
will mean that it's not findable via a search and should prevent this
situation from occurring.

Cc: stable@vger.kernel.org # v3.10+
Reported-by: Christoph Hellwig <hch@infradead.org>
Reported-by: g. artim <gartim@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-12-10 20:34:44 -05:00
Dave Chinner
1ab6c4997e fs: convert fs shrinkers to new scan/count API
Convert the filesystem shrinkers to use the new API, and standardise some
of the behaviours of the shrinkers at the same time.  For example,
nr_to_scan means the number of objects to scan, not the number of objects
to free.

I refactored the CIFS idmap shrinker a little - it really needs to be
broken up into a shrinker per tree and keep an item count with the tree
root so that we don't need to walk the tree every time the shrinker needs
to count the number of objects in the tree (i.e.  all the time under
memory pressure).

[glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree]
[assorted fixes folded in]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@openvz.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-10 18:56:31 -04:00
Wei Yongjun
c8c797f9fd nfsd: make symbol nfsd_reply_cache_shrinker static
symbol 'nfsd_reply_cache_shrinker' only used within this file. It should
be static.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-04-30 18:19:34 -04:00
Jeff Layton
0733c7ba1e nfsd: scale up the number of DRC hash buckets with cache size
We've now increased the size of the duplicate reply cache by quite a
bit, but the number of hash buckets has not changed. So, we've gone from
an average hash chain length of 16 in the old code to 4096 when the
cache is its largest. Change the code to scale out the number of buckets
with the max size of the cache.

At the same time, we also need to fix the hash function since the
existing one isn't really suitable when there are more than 256 buckets.
Move instead to use the stock hash_32 function for this. Testing on a
machine that had 2048 buckets showed that this gave a smaller
longest:average ratio than the existing hash function:

The formula here is longest hash bucket searched divided by average
number of entries per bucket at the time that we saw that longest
bucket:

    old hash: 68/(39258/2048) == 3.547404
    hash_32:  45/(33773/2048) == 2.728807

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-04-03 11:47:25 -04:00
Jeff Layton
98d821bda1 nfsd: keep stats on worst hash balancing seen so far
The typical case with the DRC is a cache miss, so if we keep track of
the max number of entries that we've ever walked over in a search, then
we should have a reasonable estimate of the longest hash chain that
we've ever seen.

With that, we'll also keep track of the total size of the cache when we
see the longest chain. In the case of a tie, we prefer to track the
smallest total cache size in order to properly gauge the worst-case
ratio of max vs. avg chain length.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-04-03 11:47:25 -04:00
Jeff Layton
a2f999a37e nfsd: add new reply_cache_stats file in nfsdfs
For presenting statistics relating to duplicate reply cache.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-04-03 11:47:24 -04:00
Jeff Layton
6c6910cd4d nfsd: track memory utilization by the DRC
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-04-03 11:47:23 -04:00
Jeff Layton
9dc56143c2 nfsd: break out comparator into separate function
Break out the function that compares the rqstp and checksum against a
reply cache entry. While we're at it, track the efficacy of the checksum
over the NFS data by tracking the cases where we would have incorrectly
matched a DRC entry if we had not tracked it or the length.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-04-03 11:47:22 -04:00
Jeff Layton
0b9ea37f24 nfsd: eliminate one of the DRC cache searches
The most common case is to do a search of the cache, followed by an
insert. In the case where we have to allocate an entry off the slab,
then we end up having to redo the search, which is wasteful.

Better optimize the code for the common case by eliminating the initial
search of the cache and always preallocating an entry. In the case of a
cache hit, we'll end up just freeing that entry but that's preferable to
an extra search.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-04-03 11:47:22 -04:00
Jeff Layton
ac534ff2d5 nfsd: fix startup order in nfsd_reply_cache_init
If we end up doing "goto out_nomem" in this function, we'll call
nfsd_reply_cache_shutdown. That will attempt to walk the LRU list and
free entries, but that list may not be initialized yet if the server is
starting up for the first time. It's also possible for the shrinker to
kick in before we've initialized the LRU list.

Rearrange the initialization so that the LRU list_head and cache size
are initialized before doing any of the allocations that might fail.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-03-18 17:21:30 -04:00
Jeff Layton
a517b608fa nfsd: only unhash DRC entries that are in the hashtable
It's not safe to call hlist_del() on a newly initialized hlist_node.
That leads to a NULL pointer dereference. Only do that if the entry
is hashed.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-03-18 14:58:32 -04:00
Linus Torvalds
b6669737d3 Merge branch 'for-3.9' of git://linux-nfs.org/~bfields/linux
Pull nfsd changes from J Bruce Fields:
 "Miscellaneous bugfixes, plus:

   - An overhaul of the DRC cache by Jeff Layton.  The main effect is
     just to make it larger.  This decreases the chances of intermittent
     errors especially in the UDP case.  But we'll need to watch for any
     reports of performance regressions.

   - Containerized nfsd: with some limitations, we now support
     per-container nfs-service, thanks to extensive work from Stanislav
     Kinsbursky over the last year."

Some notes about conflicts, since there were *two* non-data semantic
conflicts here:

 - idr_remove_all() had been added by a memory leak fix, but has since
   become deprecated since idr_destroy() does it for us now.

 - xs_local_connect() had been added by this branch to make AF_LOCAL
   connections be synchronous, but in the meantime Trond had changed the
   calling convention in order to avoid a RCU dereference.

There were a couple of more obvious actual source-level conflicts due to
the hlist traversal changes and one just due to code changes next to
each other, but those were trivial.

* 'for-3.9' of git://linux-nfs.org/~bfields/linux: (49 commits)
  SUNRPC: make AF_LOCAL connect synchronous
  nfsd: fix compiler warning about ambiguous types in nfsd_cache_csum
  svcrpc: fix rpc server shutdown races
  svcrpc: make svc_age_temp_xprts enqueue under sv_lock
  lockd: nlmclnt_reclaim(): avoid stack overflow
  nfsd: enable NFSv4 state in containers
  nfsd: disable usermode helper client tracker in container
  nfsd: use proper net while reading "exports" file
  nfsd: containerize NFSd filesystem
  nfsd: fix comments on nfsd_cache_lookup
  SUNRPC: move cache_detail->cache_request callback call to cache_read()
  SUNRPC: remove "cache_request" argument in sunrpc_cache_pipe_upcall() function
  SUNRPC: rework cache upcall logic
  SUNRPC: introduce cache_detail->cache_request callback
  NFS: simplify and clean cache library
  NFS: use SUNRPC cache creation and destruction helper for DNS cache
  nfsd4: free_stid can be static
  nfsd: keep a checksum of the first 256 bytes of request
  sunrpc: trim off trailing checksum before returning decrypted or integrity authenticated buffer
  sunrpc: fix comment in struct xdr_buf definition
  ...
2013-02-28 18:02:55 -08:00
Sasha Levin
b67bfe0d42 hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Jeff Layton
56edc86b5a nfsd: fix compiler warning about ambiguous types in nfsd_cache_csum
kbuild test robot says:

tree:   git://linux-nfs.org/~bfields/linux.git for-3.9
head:   deb4534f4f
commit: 01a7decf75 [32/44] nfsd: keep a checksum of the first 256 bytes of request
config: i386-randconfig-x088 (attached as .config)

All warnings:

   fs/nfsd/nfscache.c: In function 'nfsd_cache_csum':
>> fs/nfsd/nfscache.c:266:9: warning: comparison of distinct pointer types lacks a cast [enabled by default]

vim +266 fs/nfsd/nfscache.c

   250		__wsum csum;
   251		struct xdr_buf *buf = &rqstp->rq_arg;
   252		const unsigned char *p = buf->head[0].iov_base;
   253		size_t csum_len = min_t(size_t, buf->head[0].iov_len + buf->page_len,
   254					RC_CSUMLEN);
   255		size_t len = min(buf->head[0].iov_len, csum_len);
   256
   257		/* rq_arg.head first */
   258		csum = csum_partial(p, len, 0);
   259		csum_len -= len;
   260
   261		/* Continue into page array */
   262		idx = buf->page_base / PAGE_SIZE;
   263		base = buf->page_base & ~PAGE_MASK;
   264		while (csum_len) {
   265			p = page_address(buf->pages[idx]) + base;
 > 266			len = min(PAGE_SIZE - base, csum_len);
   267			csum = csum_partial(p, len, csum);
   268			csum_len -= len;
   269			base = 0;
   270			++idx;
   271		}
   272		return csum;
   273	}
   274

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-02-17 11:02:23 -05:00
Jeff Layton
1ac8362977 nfsd: fix comments on nfsd_cache_lookup
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-02-15 10:43:48 -05:00
Jeff Layton
01a7decf75 nfsd: keep a checksum of the first 256 bytes of request
Now that we're allowing more DRC entries, it becomes a lot easier to hit
problems with XID collisions. In order to mitigate those, calculate a
checksum of up to the first 256 bytes of each request coming in and store
that in the cache entry, along with the total length of the request.

This initially used crc32, but Chuck Lever and Jim Rees pointed out that
crc32 is probably more heavyweight than we really need for generating
these checksums, and recommended looking at using the same routines that
are used to generate checksums for IP packets.

On an x86_64 KVM guest measurements with ftrace showed ~800ns to use
csum_partial vs ~1750ns for crc32.  The difference probably isn't
terribly significant, but for now we may as well use csum_partial.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Stones-thrown-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-02-08 16:02:26 -05:00
Jeff Layton
5976687a2b sunrpc: move address copy/cmp/convert routines and prototypes from clnt.h to addr.h
These routines are used by server and client code, so having them in a
separate header would be best.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-02-05 09:41:14 -05:00
Jeff Layton
b4e7f2c945 nfsd: register a shrinker for DRC cache entries
Since we dynamically allocate them now, allow the system to call us up
to release them if it gets low on memory. Since these entries aren't
replaceable, only free ones that are expired or that are over the cap.
The the seeks value is set to '1' however to indicate that freeing the
these entries is low-cost.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-02-04 17:19:13 -05:00