It's not only for PCI devices any more, and the scope information for an
ACPI device provides the bus and devfn so that has to be stored here too.
It is the device pointer itself which needs to be protected with RCU,
so the __rcu annotation follows it into the definition of struct
dmar_dev_scope, since we're no longer just passing arrays of device
pointers around.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
In commit 2e12bc29 ("intel-iommu: Default to non-coherent for domains
unattached to iommus") we decided to err on the side of caution and
always assume that it's possible that a device will be attached which is
behind a non-coherent IOMMU.
In some cases, however, that just *cannot* happen. If there *are* no
IOMMUs in the system which are non-coherent, then we don't need to do
it. And flushing the dcache is a *significant* performance hit.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
There is a race condition between the existing clear/free code and the
hardware. The IOMMU is actually permitted to cache the intermediate
levels of the page tables, and doesn't need to walk the table from the
very top of the PGD each time. So the existing back-to-back calls to
dma_pte_clear_range() and dma_pte_free_pagetable() can lead to a
use-after-free where the IOMMU reads from a freed page table.
When freeing page tables we actually need to do the IOTLB flush, with
the 'invalidation hint' bit clear to indicate that it's not just a
leaf-node flush, after unlinking each page table page from the next level
up but before actually freeing it.
So in the rewritten domain_unmap() we just return a list of pages (using
pg->freelist to make a list of them), and then the caller is expected to
do the appropriate IOTLB flush (or tear down the domain completely,
whatever), before finally calling dma_free_pagelist() to free the pages.
As an added bonus, we no longer need to flush the CPU's data cache for
pages which are about to be *removed* from the page table hierarchy anyway,
in the non-cache-coherent case. This drastically improves the performance
of large unmaps.
As a side-effect of all these changes, this also fixes the fact that
intel_iommu_unmap() was neglecting to free the page tables for the range
in question after clearing them.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
We have this horrid API where iommu_unmap() can unmap more than it's asked
to, if the IOVA in question happens to be mapped with a large page.
Instead of propagating this nonsense to the point where we end up returning
the page order from dma_pte_clear_range(), let's just do it once and adjust
the 'size' parameter accordingly.
Augment pfn_to_dma_pte() to return the level at which the PTE was found,
which will also be useful later if we end up changing the API for
iommu_iova_to_phys() to behave the same way as is being discussed upstream.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
The iopte_free() function should check for NULL because
kmem_cache_free() will panic on NULL argument.
Signed-off-by: Zhouyi Zhou <yizhouzhou@ict.ac.cn>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Now we have a PCI bus notification based mechanism to update DMAR
device scope array, we could extend the mechanism to support boot
time initialization too, which will help to unify and simplify
the implementation.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Current Intel DMAR/IOMMU driver assumes that all PCI devices associated
with DMAR/RMRR/ATSR device scope arrays are created at boot time and
won't change at runtime, so it caches pointers of associated PCI device
object. That assumption may be wrong now due to:
1) introduction of PCI host bridge hotplug
2) PCI device hotplug through sysfs interfaces.
Wang Yijing has tried to solve this issue by caching <bus, dev, func>
tupple instead of the PCI device object pointer, but that's still
unreliable because PCI bus number may change in case of hotplug.
Please refer to http://lkml.org/lkml/2013/11/5/64
Message from Yingjing's mail:
after remove and rescan a pci device
[ 611.857095] dmar: DRHD: handling fault status reg 2
[ 611.857109] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff7000
[ 611.857109] DMAR:[fault reason 02] Present bit in context entry is clear
[ 611.857524] dmar: DRHD: handling fault status reg 102
[ 611.857534] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff6000
[ 611.857534] DMAR:[fault reason 02] Present bit in context entry is clear
[ 611.857936] dmar: DRHD: handling fault status reg 202
[ 611.857947] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff5000
[ 611.857947] DMAR:[fault reason 02] Present bit in context entry is clear
[ 611.858351] dmar: DRHD: handling fault status reg 302
[ 611.858362] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff4000
[ 611.858362] DMAR:[fault reason 02] Present bit in context entry is clear
[ 611.860819] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 611.860983] dmar: DRHD: handling fault status reg 402
[ 611.860995] dmar: INTR-REMAP: Request device [[86:00.3] fault index a4
[ 611.860995] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is clear
This patch introduces a new mechanism to update the DRHD/RMRR/ATSR device scope
caches by hooking PCI bus notification.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Global DMA and interrupt remapping resources may be accessed in
interrupt context, so use RCU instead of rwsem to protect them
in such cases.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Introduce a global rwsem dmar_global_lock, which will be used to
protect DMAR related global data structures from DMAR/PCI/memory
device hotplug operations in process context.
DMA and interrupt remapping related data structures are read most,
and only change when memory/PCI/DMAR hotplug event happens.
So a global rwsem solution is adopted for balance between simplicity
and performance.
For interrupt remapping driver, function intel_irq_remapping_supported(),
dmar_table_init(), intel_enable_irq_remapping(), disable_irq_remapping(),
reenable_irq_remapping() and enable_drhd_fault_handling() etc
are called during booting, suspending and resuming with interrupt
disabled, so no need to take the global lock.
For interrupt remapping entry allocation, the locking model is:
down_read(&dmar_global_lock);
/* Find corresponding iommu */
iommu = map_hpet_to_ir(id);
if (iommu)
/*
* Allocate remapping entry and mark entry busy,
* the IOMMU won't be hot-removed until the
* allocated entry has been released.
*/
index = alloc_irte(iommu, irq, 1);
up_read(&dmar_global_lock);
For DMA remmaping driver, we only uses the dmar_global_lock rwsem to
protect functions which are only called in process context. For any
function which may be called in interrupt context, we will use RCU
to protect them in following patches.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Introduce for_each_dev_scope()/for_each_active_dev_scope() to walk
{active} device scope entries. This will help following RCU lock
related patches.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Reduce duplicated code to handle virtual machine domains, there's no
functionality changes. It also improves code readability.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Enhance function get_domain_for_dev() to release allocated resources
if failed to create domain for PCIe endpoint, otherwise the allocated
resources will get lost.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Function get_domain_for_dev() is a little complex, simplify it
by factoring out dmar_search_domain_by_dev_info() and
dmar_insert_dev_info().
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Move private structures and variables into intel-iommu.c, which will
help to simplify locking policy for hotplug. Also delete redundant
declarations.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Factor out function dmar_alloc_dev_scope() from dmar_parse_dev_scope()
for later reuse.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Function device_notifier() in intel-iommu.c only remove domain_device_info
data structure associated with a PCI device when handling PCI device
driver unbinding events. If a PCI device has never been bound to a PCI
device driver, there won't be BUS_NOTIFY_UNBOUND_DRIVER event when
hot-removing the PCI device. So associated domain_device_info data
structure may get lost.
On the other hand, if iommu_pass_through is enabled, function
iommu_prepare_static_indentify_mapping() will create domain_device_info
data structure for each PCIe to PCIe bridge and PCIe endpoint,
no matter whether there are drivers associated with those PCIe devices
or not. So those domain_device_info data structures will get lost when
hot-removing the assocated PCIe devices if they have never bound to
any PCI device driver.
To be even worse, it's not only an memory leak issue, but also an
caching of stale information bug because the memory are kept in
device_domain_list and domain->devices lists.
Fix the bug by trying to remove domain_device_info data structure when
handling BUS_NOTIFY_DEL_DEVICE event.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Function device_notifier() in intel-iommu.c fails to remove
device_domain_info data structures for PCI devices if they are
associated with si_domain because iommu_no_mapping() returns true
for those PCI devices. This will cause memory leak and caching of
stale information in domain->devices list.
So fix the issue by not calling iommu_no_mapping() and skipping check
of iommu_pass_through.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The OMAP IOMMU driver locates the IOMMU associated to a device using the
IOMMU name stored in the device archdata iommu field. That field is
expected to be populated by platform code and is left unset for DT-based
devices. This results in a crash when the IOMMU driver attaches a domain
to a device.
Fix this by allocating the archdata iommu structure when devices are
added and freeing when they are removed. Devices without an OF node, and
devices without an iommus property in their OF node are ignored. The
iommu name is initialized from the IOMMU device node name.
This should be simplified when removing non-DT support completely from
the IOMMU users as the IOMMU name won't be needed anymore, and the
IOMMU device pointer could then be stored in the archdata iommu field
directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[s-anna@ti.com: updated to use device name instead of OF name]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The remoteproc MMUs in OMAP4+ SoCs have some additional debug
registers that can give out the PC value in addition to the
MMU fault address. The PC value can be extracted properly only
on the DSP cores, and is not available on the ARM processors
within the IPU sub-systems. Instead, the MMUs have been enhanced
to throw a bus-error response back to the IPU processors.
This functionality is programmable through the MMU_GP_REG register.
The cores are simply stalled if the MMU_GP_REG.BUS_ERR_BACK_EN bit
is not set. When set, a bus-error exception is raised allowing the
processor to handle it as a bus fault and provide additional debug
information. This feature is turned on by default by the driver on
iommus supporting it.
Signed-off-by: Subramaniam Chanderashekarapuram <subramaniam.ca@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
As OMAP2+ is moving to a full DT boot for all SoC families, commit
7ce93f3 "ARM: OMAP2+: Fix more missing data for omap3.dtsi file"
adds basic DT bits for OMAP3. But the driver is not yet converted,
so this will not work and driver will not be probed. Convert it!
The legacy boot mode is still supported until OMAP3 is converted
to DT-boot only.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
[s-anna@ti.com: dev_name adaptation and improved error checking]
Signed-off-by: Suman Anna <s-anna@ti.com>
[tony@atomide.com: Ack for arch/arm/*omap* parts]
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
When booting with a devicetree, no platform data is provided.
Do not prematurely exit iommu_enable() and iommu_disable() in
such a case.
Note: As OMAP do not yet has a proper reset controller driver,
IOMMUs requiring a reset signal should use pdata-quirks as a
transitional solution.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
There are couple of issues with the error return paths in
omap_iommu_attach():
1. omap_iommu_attach() returns NULL or ERR_PTR in case of error,
but omap_iommu_attach_dev() only checks for IS_ERR. Thus a NULL
return value (in case driver_find_device fails) will cause the
kernel to panic when omap_iommu_attach_dev() dereferences the
pointer.
2. A try_module_get() failure returns a valid success value as
returned from iommu_enable().
Both the above issues have been fixed up to return the proper
ERR_PTR.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Use the various devm_ interfaces to simplify the cleanup in
probe and remove functions.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Commit 78a2e12f51 ("iommu: shmobile: Enable driver compilation with
COMPILE_TEST") added an optional dependency on SH_MOBILE. But that
Kconfig symbol doesn't exist. It seems ARCH_SHMOBILE was intended. Use
that.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
This patch corrects the PASID format in the INVALIDATE_IOTLB_PAGES
command, which was caused by incorrect information in
the AMD IOMMU Architectural Specification v2.01 document.
Incorrect format:
cmd->data[0][16:23] = PASID[7:0]
cmd->data[1][16:27] = PASID[19:8]
Correct format:
cmd->data[0][16:23] = PASID[15:8]
cmd->data[1][16:23] = PASID[7:0]
However, this does not affect the IOMMUv2 hardware implementation,
and has been corrected since version 2.02 of the specification
(available through AMD NDA).
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The 'order' parameter for IOMMU-aware dma-mapping implementation was
introduced mainly as a hack to reduce size of the bitmap used for
tracking IO virtual address space. Since now it is possible to dynamically
resize the bitmap, this hack is not needed and can be removed without any
impact on the client devices. This way the parameters for
arm_iommu_create_mapping() becomes much easier to understand. 'size'
parameter now means the maximum supported IO address space size.
The code will allocate (resize) bitmap in chunks, ensuring that a single
chunk is not larger than a single memory page to avoid unreliable
allocations of size larger than PAGE_SIZE in atomic context.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Commit 1463fe44fd ("iommu/arm-smmu: Don't use VMIDs for stage-1
translations") moved our TLB invalidation from context creation time to
context destruction time, but forgot to update an associated comment.
This patch fixes the broken comment.
Signed-off-by: Will Deacon <will.deacon@arm.com>
These should have been octal.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On coherent systems, publishing new page tables to the SMMU walker is
achieved with a dsb instruction. In fact, this can be a dsb(ishst) which
also provides the mandatory barrier option for arm64.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit 972157cac5 ("arm/smmu: Use irqsafe spinlock for domain lock")
fixed our page table locks to be the irq{save,restore} variants, since
the DMA mapping API can be invoked from interrupt context.
This patch cleans up our use of the flags variable so we can distinguish
between IRQ flags (now `flags') and pte protection bits (now `prot').
Signed-off-by: Will Deacon <will.deacon@arm.com>
In such a case we have to use secure aliases of some non-secure
registers.
This handling is switched on by DT property
"calxeda,smmu-secure-config-access" for an SMMU node.
Signed-off-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
[will: merged with driver option handling patch]
Signed-off-by: Will Deacon <will.deacon@arm.com>
The DT parsing code that determines stream IDs uses
of_parse_phandle_with_args and thus MAX_MASTER_STREAMIDS
is always bound by MAX_PHANDLE_ARGS.
Signed-off-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
As the lock might be used through DMA-API which is allowed
in interrupt context.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Will Deacon <will.deacon@arm.com>
We currently include <linux/irqreturn.h> in <linux/pci.h>, but I'm about to
remove that from linux/pci.h, so add explicit includes where needed.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Whilst trying to bring-up an SMMUv2 implementation with the table
walker plumbed into a coherent interconnect, I noticed that the memory
transactions targetting the CPU caches from the SMMU were marked as
outer-shareable instead of inner-shareable.
After a bunch of digging, it seems that we actually need to program
CBARn.BPSHCFG for s1-s2-bypass contexts to act as non-shareable in order
for the shareability configured in the corresponding TTBCR not to be
overridden with an outer-shareable attribute.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that we populate page tables as we traverse them ("iommu/arm-smmu:
fix pud/pmd entry fill sequence"), we need to ensure that we flush out
our zeroed tables after initial allocation, to prevent speculative TLB
fills using bogus data.
This patch adds additional calls to arm_smmu_flush_pgtable during
initial table allocation, and moves the dsb required by coherent table
walkers into the helper.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit a44a9791e7 ("iommu/arm-smmu: use mutex instead of spinlock for
locking page tables") replaced the page table spinlock with a mutex, to
allow blocking allocations to satisfy lazy mapping requests.
Unfortunately, it turns out that IOMMU mappings are created from atomic
context (e.g. spinlock held during a dma_map), so this change doesn't
really help us in practice.
This patch is a partial revert of the offending commit, bringing back
the original spinlock but replacing our page table allocations for any
levels below the pgd (which is allocated during domain init) with
GFP_ATOMIC instead of GFP_KERNEL.
Cc: <stable@vger.kernel.org>
Reported-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The ARM SMMU driver's population of puds and pmds is broken, since we
iterate over the next level of table repeatedly setting the current
level descriptor to point at the pmd being initialised. This is clearly
wrong when dealing with multiple pmds/puds.
This patch fixes the problem by moving the pud/pmd population out of the
loop and instead performing it when we allocate the next level (like we
correctly do for ptes already). The starting address for the next level
is then calculated prior to entering the loop.
Cc: <stable@vger.kernel.org>
Signed-off-by: Yifan Zhang <zhangyf@marvell.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
A few patches have been queued up for this merge window:
* Improvements for the ARM-SMMU driver
(IOMMU_EXEC support, IOMMU group support)
* Updates and fixes for the shmobile IOMMU driver
* Various fixes to generic IOMMU code and the
Intel IOMMU driver
* Some cleanups in IOMMU drivers (dev_is_pci() usage)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=YKLk
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU Updates from Joerg Roedel:
"A few patches have been queued up for this merge window:
- improvements for the ARM-SMMU driver (IOMMU_EXEC support, IOMMU
group support)
- updates and fixes for the shmobile IOMMU driver
- various fixes to generic IOMMU code and the Intel IOMMU driver
- some cleanups in IOMMU drivers (dev_is_pci() usage)"
* tag 'iommu-updates-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (36 commits)
iommu/vt-d: Fix signedness bug in alloc_irte()
iommu/vt-d: free all resources if failed to initialize DMARs
iommu/vt-d, trivial: clean sparse warnings
iommu/vt-d: fix wrong return value of dmar_table_init()
iommu/vt-d: release invalidation queue when destroying IOMMU unit
iommu/vt-d: fix access after free issue in function free_dmar_iommu()
iommu/vt-d: keep shared resources when failed to initialize iommu devices
iommu/vt-d: fix invalid memory access when freeing DMAR irq
iommu/vt-d, trivial: simplify code with existing macros
iommu/vt-d, trivial: use defined macro instead of hardcoding
iommu/vt-d: mark internal functions as static
iommu/vt-d, trivial: clean up unused code
iommu/vt-d, trivial: check suitable flag in function detect_intel_iommu()
iommu/vt-d, trivial: print correct domain id of static identity domain
iommu/vt-d, trivial: refine support of 64bit guest address
iommu/vt-d: fix resource leakage on error recovery path in iommu_init_domains()
iommu/vt-d: fix a race window in allocating domain ID for virtual machines
iommu/vt-d: fix PCI device reference leakage on error recovery path
drm/msm: Fix link error with !MSM_IOMMU
iommu/vt-d: use dedicated bitmap to track remapping entry allocation status
...
- ACPI core changes to make it create a struct acpi_device object for every
device represented in the ACPI tables during all namespace scans regardless
of the current status of that device. In accordance with this, ACPI hotplug
operations will not delete those objects, unless the underlying ACPI tables
go away.
- On top of the above, new sysfs attribute for ACPI device objects allowing
user space to check device status by triggering the execution of _STA for
its ACPI object. From Srinivas Pandruvada.
- ACPI core hotplug changes reducing code duplication, integrating the
PCI root hotplug with the core and reworking container hotplug.
- ACPI core simplifications making it use ACPI_COMPANION() in the code
"glueing" ACPI device objects to "physical" devices.
- ACPICA update to upstream version 20131218. This adds support for the
DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug
facilities. From Bob Moore, Lv Zheng and Betty Dall.
- Init code change to carry out the early ACPI initialization earlier.
That should allow us to use ACPI during the timekeeping initialization
and possibly to simplify the EFI initialization too. From Chun-Yi Lee.
- Clenups of the inclusions of ACPI headers in many places all over from
Lv Zheng and Rashika Kheria (work in progress).
- New helper for ACPI _DSM execution and rework of the code in drivers
that uses _DSM to execute it via the new helper. From Jiang Liu.
- New Win8 OSI blacklist entries from Takashi Iwai.
- Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo,
Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria,
Tang Chen, Zhang Rui.
- intel_pstate driver updates, including proper Baytrail support, from
Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra.
- Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski.
- powernow-k6 cpufreq driver fixes from Mikulas Patocka.
- cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown.
- Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias,
Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar.
- cpuidle cleanups from Bartlomiej Zolnierkiewicz.
- Support for hibernation APM events from Bin Shi.
- Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled
during thaw transitions from Bjørn Mork.
- PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson.
- PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa,
Rashika Kheria.
- New tool for profiling system suspend from Todd E Brandt and a cpupower
tool cleanup from One Thousand Gnomes.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=dRf6
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"As far as the number of commits goes, the top spot belongs to ACPI
this time with cpufreq in the second position and a handful of PM
core, PNP and cpuidle updates. They are fixes and cleanups mostly, as
usual, with a couple of new features in the mix.
The most visible change is probably that we will create struct
acpi_device objects (visible in sysfs) for all devices represented in
the ACPI tables regardless of their status and there will be a new
sysfs attribute under those objects allowing user space to check that
status via _STA.
Consequently, ACPI device eject or generally hot-removal will not
delete those objects, unless the table containing the corresponding
namespace nodes is unloaded, which is extremely rare. Also ACPI
container hotplug will be handled quite a bit differently and cpufreq
will support CPU boost ("turbo") generically and not only in the
acpi-cpufreq driver.
Specifics:
- ACPI core changes to make it create a struct acpi_device object for
every device represented in the ACPI tables during all namespace
scans regardless of the current status of that device. In
accordance with this, ACPI hotplug operations will not delete those
objects, unless the underlying ACPI tables go away.
- On top of the above, new sysfs attribute for ACPI device objects
allowing user space to check device status by triggering the
execution of _STA for its ACPI object. From Srinivas Pandruvada.
- ACPI core hotplug changes reducing code duplication, integrating
the PCI root hotplug with the core and reworking container hotplug.
- ACPI core simplifications making it use ACPI_COMPANION() in the
code "glueing" ACPI device objects to "physical" devices.
- ACPICA update to upstream version 20131218. This adds support for
the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves
debug facilities. From Bob Moore, Lv Zheng and Betty Dall.
- Init code change to carry out the early ACPI initialization
earlier. That should allow us to use ACPI during the timekeeping
initialization and possibly to simplify the EFI initialization too.
From Chun-Yi Lee.
- Clenups of the inclusions of ACPI headers in many places all over
from Lv Zheng and Rashika Kheria (work in progress).
- New helper for ACPI _DSM execution and rework of the code in
drivers that uses _DSM to execute it via the new helper. From
Jiang Liu.
- New Win8 OSI blacklist entries from Takashi Iwai.
- Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun
Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava,
Rashika Kheria, Tang Chen, Zhang Rui.
- intel_pstate driver updates, including proper Baytrail support,
from Dirk Brandewie and intel_pstate documentation from Ramkumar
Ramachandra.
- Generic CPU boost ("turbo") support for cpufreq from Lukasz
Majewski.
- powernow-k6 cpufreq driver fixes from Mikulas Patocka.
- cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark
Brown.
- Assorted cpufreq drivers fixes and cleanups from Anson Huang, John
Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh
Kumar.
- cpuidle cleanups from Bartlomiej Zolnierkiewicz.
- Support for hibernation APM events from Bin Shi.
- Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC
disabled during thaw transitions from Bjørn Mork.
- PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf
Hansson.
- PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente
Kurusa, Rashika Kheria.
- New tool for profiling system suspend from Todd E Brandt and a
cpupower tool cleanup from One Thousand Gnomes"
* tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits)
thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412)
cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ
Documentation: cpufreq / boost: Update BOOST documentation
cpufreq: exynos: Extend Exynos cpufreq driver to support boost
cpufreq / boost: Kconfig: Support for software-managed BOOST
acpi-cpufreq: Adjust the code to use the common boost attribute
cpufreq: Add boost frequency support in core
intel_pstate: Add trace point to report internal state.
cpufreq: introduce cpufreq_generic_get() routine
ARM: SA1100: Create dummy clk_get_rate() to avoid build failures
cpufreq: stats: create sysfs entries when cpufreq_stats is a module
cpufreq: stats: free table and remove sysfs entry in a single routine
cpufreq: stats: remove hotplug notifiers
cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly
cpufreq: speedstep: remove unused speedstep_get_state
platform: introduce OF style 'modalias' support for platform bus
PM / tools: new tool for suspend/resume performance optimization
ACPI: fix module autoloading for ACPI enumerated devices
ACPI: add module autoloading support for ACPI enumerated devices
ACPI: fix create_modalias() return value handling
...
dma_pte_free_level() has an off-by-one error when checking whether a pte
is completely covered by a range. Take for example the case of
attempting to free pfn 0x0 - 0x1ff, ie. 512 entries covering the first
2M superpage.
The level_size() is 0x200 and we test:
static void dma_pte_free_level(...
...
if (!(0 > 0 || 0x1ff < 0 + 0x200)) {
...
}
Clearly the 2nd test is true, which means we fail to take the branch to
clear and free the pagetable entry. As a result, we're leaking
pagetables and failing to install new pages over the range.
This was found with a PCI device assigned to a QEMU guest using vfio-pci
without a VGA device present. The first 1M of guest address space is
mapped with various combinations of 4K pages, but eventually the range
is entirely freed and replaced with a 2M contiguous mapping.
intel-iommu errors out with something like:
ERROR: DMA PTE for vPFN 0x0 already set (to 5c2b8003 not 849c00083)
In this case 5c2b8003 is the pointer to the previous leaf page that was
neither freed nor cleared and 849c00083 is the superpage entry that
we're trying to replace it with.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* acpi-cleanup: (22 commits)
ACPI / tables: Return proper error codes from acpi_table_parse() and fix comment.
ACPI / tables: Check if id is NULL in acpi_table_parse()
ACPI / proc: Include appropriate header file in proc.c
ACPI / EC: Remove unused functions and add prototype declaration in internal.h
ACPI / dock: Include appropriate header file in dock.c
ACPI / PCI: Include appropriate header file in pci_link.c
ACPI / PCI: Include appropriate header file in pci_slot.c
ACPI / EC: Mark the function acpi_ec_add_debugfs() as static in ec_sys.c
ACPI / NVS: Include appropriate header file in nvs.c
ACPI / OSL: Mark the function acpi_table_checksum() as static
ACPI / processor: initialize a variable to silence compiler warning
ACPI / processor: use ACPI_COMPANION() to get ACPI device
ACPI: correct minor typos
ACPI / sleep: Drop redundant acpi_disabled check
ACPI / dock: Drop redundant acpi_disabled check
ACPI / table: Replace '1' with specific error return values
ACPI: remove trailing whitespace
ACPI / IBFT: Fix incorrect <acpi/acpi.h> inclusion in iSCSI boot firmware module
ACPI / i915: Fix incorrect <acpi/acpi.h> inclusions via <linux/acpi_io.h>
SFI / ACPI: Fix warnings reported during builds with W=1
...
Conflicts:
drivers/acpi/nvs.c
drivers/hwmon/asus_atk0110.c
"index" needs to be signed for the error handling to work. I deleted a
little bit of obsolete cruft related to "index" and "start_index" as
well.
Fixes: 360eb3c568 ('iommu/vt-d: use dedicated bitmap to track remapping entry allocation status')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Enhance intel_iommu_init() to free all resources if failed to
initialize DMAR hardware.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Clean up most sparse warnings in Intel DMA and interrupt remapping
drivers.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
If dmar_table_init() fails to detect DMAR table on the first call,
it will return wrong result on following calls because it always
sets dmar_table_initialized no matter if succeeds or fails to
detect DMAR table.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Release associated invalidation queue when destroying IOMMU unit
to avoid memory leak.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Simplify vt-d related code with existing macros and introduce a new
macro for_each_active_drhd_unit() to enumerate all active DRHD unit.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Use defined macro instead of hardcoding in function set_ioapic_sid()
for readability.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Functions alloc_iommu() and parse_ioapics_under_ir()
are only used internally, so mark them as static.
[Joerg: Made detect_intel_iommu() non-static again for IA64]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Remove dead code from VT-d related files.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Conflicts:
drivers/iommu/dmar.c
Flag irq_remapping_enabled is only set by intel_enable_irq_remapping(),
which is called after detect_intel_iommu(). So moving pr_info() from
detect_intel_iommu() to intel_enable_irq_remapping(), which also
slightly simplifies implementation.
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Field si_domain->id is set by iommu_attach_domain(), so we should only
print domain id for static identity domain after calling
iommu_attach_domain(si_domain, iommu), otherwise it's always zero.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
In Intel IOMMU driver, it calculate page table level from adjusted guest
address width as 'level = (agaw - 30) / 9', which assumes (agaw -30)
could be divided by 9. On the other hand, 64bit is a valid agaw and
(64 - 30) can't be divided by 9, so it needs special handling.
This patch enhances Intel IOMMU driver to correctly handle 64bit agaw.
It's mainly for code readability because there's no hardware supporting
64bit agaw yet.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Release allocated resources on error recovery path in function
iommu_init_domains().
Also improve printk messages in iommu_init_domains().
Acked-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Function intel_iommu_domain_init() may be concurrently called by upper
layer without serialization, so use atomic_t to protect domain id
allocation.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Function dmar_parse_dev_scope() should release the PCI device reference
count gained in function dmar_parse_one_dev_scope() on error recovery,
otherwise it will cause PCI device object leakage.
This patch also introduces dmar_free_dev_scope(), which will be used
to support DMAR device hotplug.
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Currently Intel interrupt remapping drivers uses the "present" flag bit
in remapping entry to track whether an entry is allocated or not.
It works as follow:
1) allocate a remapping entry and set its "present" flag bit to 1
2) compose other fields for the entry
3) update the remapping entry with the composed value
The remapping hardware may access the entry between step 1 and step 3,
which then observers an entry with the "present" flag set but random
values in all other fields.
This patch introduces a dedicated bitmap to track remapping entry
allocation status instead of sharing the "present" flag with hardware,
thus eliminate the race window. It also simplifies the implementation.
Tested-and-reviewed-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The lock is taken in atomic context, replace it with a spinlock.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The archdata attached_list field isn't initialized, leading to random
crashes when accessed. Use kzalloc() to allocate the whole structure and
make sure all fields get initialized properly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Use PCI standard marco dev_is_pci() instead of directly compare
pci_bus_type to check whether it is pci device.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Varun Sethi <varun.sethi@freescale.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Use PCI standard marco dev_is_pci() instead of directly compare
pci_bus_type to check whether it is pci device.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Use PCI standard marco dev_is_pci() instead of directly compare
pci_bus_type to check whether it is pci device.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Fix a warning in of_iommu.c:
drivers/iommu/of_iommu.c:38:5: warning: no previous prototype for 'of_get_dma_window' [-Wmissing-prototypes]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Hiroshi DOYU <hdoyu@nvidia.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
This helps increasing build testing coverage.
The driver doesn't compile on non-ARM platforms due to usage of the ARM
DMA IOMMU API, restrict compilation to ARM.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Mark function eoi_ioapic_pin_remapped() as static in irq_remapping.c
because it is not used outside this file.
This eliminates the following warning in
irq_remapping.c:drivers/iommu/irq_remapping.c:153:6: warning: no
previous prototype for ‘eoi_ioapic_pin_remapped’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Mark functions int get_irte() and ir_dev_scope_init() as static in
intel_irq_remapping.c because they are not used outside this file.
This eliminates the following warnings in intel_irq_remapping.c:
drivers/iommu/intel_irq_remapping.c:49:5: warning: no previous prototype for ‘get_irte’ [-Wmissing-prototypes]
drivers/iommu/intel_irq_remapping.c:810:12: warning: no previous prototype for ‘ir_dev_scope_init’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Mark the functions check_zero_address() and dmar_get_fault_reason() as
static in dmar.c because they are not used outside this file.
This eliminates the following warnings in dmar.c:
drivers/iommu/dmar.c:491:12: warning: no previous prototype for ‘check_zero_address’ [-Wmissing-prototypes]
drivers/iommu/dmar.c:1116:13: warning: no previous prototype for ‘dmar_get_fault_reason’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Previously, all of our mappings were marked as executable, which isn't
usually required. Now that we have the IOMMU_EXEC flag, use that to
determine whether or not a mapping should be marked as executable.
Signed-off-by: Will Deacon <will.deacon@arm.com>
With the introduction of the VA_BITS definition for arm64, make use of
it in the driver, allowing up to 42-bits of VA space when configured
with 64k pages.
Signed-off-by: Will Deacon <will.deacon@arm.com>
IOMMU groups are expected by certain users of the IOMMU API,
e.g. VFIO. Add new devices found by the SMMU driver to an IOMMU
group to satisfy those users.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and
<acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h>
inclusions and remove some inclusions of those files that aren't
necessary.
First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>
should not be included directly from any files that are built for
CONFIG_ACPI unset, because that generally leads to build warnings about
undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set,
<linux/acpi.h> includes those files and for CONFIG_ACPI unset it
provides stub ACPI symbols to be used in that case.
Second, there are ordering dependencies between those files that always
have to be met. Namely, it is required that <acpi/acpi_bus.h> be included
prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the
latter depends on are always there. And <acpi/acpi.h> which provides
basic ACPICA type declarations should always be included prior to any other
ACPI headers in CONFIG_ACPI builds. That also is taken care of including
<linux/acpi.h> as appropriate.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff)
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix to return -ENODEV instead of 0 when context interrupt number
does no match in arm_smmu_device_dt_probe().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When handling mapping requests, we dereference the SMMU domain before
checking that it is NULL. This patch fixes the issue by removing the check
altogether, since we don't actually use the leaf_smmu when creating
mappings.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When creating IO mappings, we lazily allocate our page tables using the
standard, non-atomic allocator functions. This presents us with a
problem, since our page tables are protected with a spinlock.
This patch reworks the smmu_domain lock to use a mutex instead of a
spinlock. iova_to_phys is then reworked so that it only reads the page
tables, and can run in a lockless fashion, leaving the mutex to guard
against concurrent mapping threads.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit 7d02c4d64d ("iommu/shmobile: Enable the driver on all ARM
platforms") completely brokenly enabled the shmobile-iommu driver under
COMPILE_TEST.
It's bogus, because it won't compile anywhere else than ARM, since it
tries to include <asm/dma-iommu.h>, which is very much ARM-only.
So remove the bogus COMPILE_TEST dependency, which just causes
allmodconfig to fail on non-ARM platforms.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Simon Horman <horms@verge.net.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This time the updates contain:
* Tracepoints for certain IOMMU-API functions to make
their use easier to debug
* A tracepoint for IOMMU page faults to make it easier
to get them in user space
* Updates and fixes for the new ARM SMMU driver after
the first hardware showed up
* Various other fixes and cleanups in other IOMMU drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJShVQAAAoJECvwRC2XARrj4T8P/2C/aej9QoEZhZRsJbClt7d6
6j6VoAYzFGQ5KKGuIXH/qmJqQKrDhRq7O/dP6XZEFYTDiyAcpLPK9sZ3eovNrur6
xW7TIpewZczEOPY0sz7Hkg90DgP0DnU37fELA0oYoUe55jQ0uZrcXmptcWlQssei
UZ6Cx2x9ebVcvPz2Ge7cNuDT8FXpu2MGNR7FLlh49EarFwMkl/al5oFuTcnmAojO
ypsafA5JBmsjhu3VpiI+VolZMEnYzUtZlIjv44cHw891RL5iQkcxVT/UWC8q3jHW
+OZZci21/MN3X4f2GcQUE5lEJTLX+mcmlGRoDF6B4Lh4n0IZGikyNThZMPRU1Q6x
6Ab76qHhOJtcGnxWcMiEbReUC6oPRFyr8YzTrJJfNp6iTMNgXgISKwL6UV1A7Lha
pZDXjAzREgxe8FbU3JZGfgcMg7WlnN/Y33R5E/UGwXK/MDAL0BCwNV4PBE0LCbtH
2qCzBC3TIWF7NMbIp0GnD8cbJJRO7c1hIZkVNRUwbUXkrMT75CfNIhq3l9xeWAIF
ooXvNa+MO0uJPQ/0IAJc5+AGBEEiPnvXEnp8XfTWE6S8dkA26LokKslI6fsZE27s
r0P+dHhc1OiHsIAngYqetWXZ/OdeNMfeBhIWeiKj2VKrT8MG8e/tdO9ICAHkVQSt
dnUAmLQqyR41hcI5hFEu
=IWTK
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
"This time the updates contain:
- Tracepoints for certain IOMMU-API functions to make their use
easier to debug
- A tracepoint for IOMMU page faults to make it easier to get them in
user space
- Updates and fixes for the new ARM SMMU driver after the first
hardware showed up
- Various other fixes and cleanups in other IOMMU drivers"
* tag 'iommu-updates-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (26 commits)
iommu/shmobile: Enable the driver on all ARM platforms
iommu/tegra-smmu: Staticize tegra_smmu_pm_ops
iommu/tegra-gart: Staticize tegra_gart_pm_ops
iommu/vt-d: Use list_for_each_entry_safe() for dmar_domain->devices traversal
iommu/vt-d: Use for_each_drhd_unit() instead of list_for_each_entry()
iommu/vt-d: Fixed interaction of VFIO_IOMMU_MAP_DMA with IOMMU address limits
iommu/arm-smmu: Clear global and context bank fault status registers
iommu/arm-smmu: Print context fault information
iommu/arm-smmu: Check for num_context_irqs > 0 to avoid divide by zero exception
iommu/arm-smmu: Refine check for proper size of mapped region
iommu/arm-smmu: Switch to subsys_initcall for driver registration
iommu/arm-smmu: use relaxed accessors where possible
iommu/arm-smmu: replace devm_request_and_ioremap by devm_ioremap_resource
iommu: Remove stack trace from broken irq remapping warning
iommu: Change iommu driver to call io_page_fault trace event
iommu: Add iommu_error class event to iommu trace
iommu/tegra: gart: cleanup devm_* functions usage
iommu/tegra: Print phys_addr_t using %pa
iommu: No need to pass '0x' when '%pa' is used
iommu: Change iommu driver to call unmap trace event
...
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- New power capping framework and the the Intel Running Average Power
Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.
- Addition of the in-kernel switching feature to the arm_big_little
cpufreq driver from Viresh Kumar and Nicolas Pitre.
- cpufreq support for iMac G5 from Aaro Koskinen.
- Baytrail processors support for intel_pstate from Dirk Brandewie.
- cpufreq support for Midway/ECX-2000 from Mark Langsdorf.
- ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.
- ACPI power management support for the I2C and SPI bus types from
Mika Westerberg and Lv Zheng.
- cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.
- cpufreq drivers updates (mostly fixes and cleanups) from Viresh Kumar,
Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz Majewski,
Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.
- intel_pstate updates from Dirk Brandewie and Adrian Huang.
- ACPICA update to version 20130927 includig fixes and cleanups and
some reduction of divergences between the ACPICA code in the kernel
and ACPICA upstream in order to improve the automatic ACPICA patch
generation process. From Bob Moore, Lv Zheng, Tomasz Nowicki,
Naresh Bhat, Bjorn Helgaas, David E Box.
- ACPI IPMI driver fixes and cleanups from Lv Zheng.
- ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani,
Zhang Yanfei, Rafael J Wysocki.
- Conversion of the ACPI AC driver to the platform bus type and
multiple driver fixes and cleanups related to ACPI from Zhang Rui.
- ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.
- Fixes and cleanups and new blacklist entries related to the ACPI
video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
Kirill Tkhai.
- cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.
- cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
Bartlomiej Zolnierkiewicz, Prarit Bhargava.
- devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.
- Operation Performance Points (OPP) core updates from Nishanth Menon.
- Runtime power management core fix from Rafael J Wysocki and update
from Ulf Hansson.
- Hibernation fixes from Aaron Lu and Rafael J Wysocki.
- Device suspend/resume lockup detection mechanism from Benoit Goby.
- Removal of unused proc directories created for various ACPI drivers
from Lan Tianyu.
- ACPI LPSS driver fix and new device IDs for the ACPI platform scan
handler from Heikki Krogerus and Jarkko Nikula.
- New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.
- Assorted fixes and cleanups related to ACPI from Andy Shevchenko,
Al Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
Liu Chuansheng.
- Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
Jean-Christophe Plagniol-Villard.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=JCxk
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael J Wysocki:
- New power capping framework and the the Intel Running Average Power
Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.
- Addition of the in-kernel switching feature to the arm_big_little
cpufreq driver from Viresh Kumar and Nicolas Pitre.
- cpufreq support for iMac G5 from Aaro Koskinen.
- Baytrail processors support for intel_pstate from Dirk Brandewie.
- cpufreq support for Midway/ECX-2000 from Mark Langsdorf.
- ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.
- ACPI power management support for the I2C and SPI bus types from Mika
Westerberg and Lv Zheng.
- cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.
- cpufreq drivers updates (mostly fixes and cleanups) from Viresh
Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz
Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.
- intel_pstate updates from Dirk Brandewie and Adrian Huang.
- ACPICA update to version 20130927 includig fixes and cleanups and
some reduction of divergences between the ACPICA code in the kernel
and ACPICA upstream in order to improve the automatic ACPICA patch
generation process. From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh
Bhat, Bjorn Helgaas, David E Box.
- ACPI IPMI driver fixes and cleanups from Lv Zheng.
- ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang
Yanfei, Rafael J Wysocki.
- Conversion of the ACPI AC driver to the platform bus type and
multiple driver fixes and cleanups related to ACPI from Zhang Rui.
- ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.
- Fixes and cleanups and new blacklist entries related to the ACPI
video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
Kirill Tkhai.
- cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.
- cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
Bartlomiej Zolnierkiewicz, Prarit Bhargava.
- devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.
- Operation Performance Points (OPP) core updates from Nishanth Menon.
- Runtime power management core fix from Rafael J Wysocki and update
from Ulf Hansson.
- Hibernation fixes from Aaron Lu and Rafael J Wysocki.
- Device suspend/resume lockup detection mechanism from Benoit Goby.
- Removal of unused proc directories created for various ACPI drivers
from Lan Tianyu.
- ACPI LPSS driver fix and new device IDs for the ACPI platform scan
handler from Heikki Krogerus and Jarkko Nikula.
- New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.
- Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al
Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
Liu Chuansheng.
- Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
Jean-Christophe Plagniol-Villard.
* tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits)
cpufreq: conservative: fix requested_freq reduction issue
ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines
PM / runtime: Use pm_runtime_put_sync() in __device_release_driver()
ACPI / event: remove unneeded NULL pointer check
Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1"
ACPI / video: Quirk initial backlight level 0
ACPI / video: Fix initial level validity test
intel_pstate: skip the driver if ACPI has power mgmt option
PM / hibernate: Avoid overflow in hibernate_preallocate_memory()
ACPI / hotplug: Do not execute "insert in progress" _OST
ACPI / hotplug: Carry out PCI root eject directly
ACPI / hotplug: Merge device hot-removal routines
ACPI / hotplug: Make acpi_bus_hot_remove_device() internal
ACPI / hotplug: Simplify device ejection routines
ACPI / hotplug: Fix handle_root_bridge_removal()
ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug
ACPI / scan: Start matching drivers after trying scan handlers
ACPI: Remove acpi_pci_slot_init() headers from internal.h
ACPI / blacklist: fix name of ThinkPad Edge E530
PowerCap: Fix build error with option -Werror=format-security
...
Conflicts:
arch/arm/mach-omap2/opp.c
drivers/Kconfig
drivers/spi/spi.c
Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI, and increase build testing coverage with
COMPILE_TEST.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
'tegra_smmu_pm_ops' is used only in this file. Make it static.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
'tegra_gart_pm_ops' is local to this file. Make it static.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Use for_each_drhd_unit() instead of list_for_each_entry for
better readability.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The BUG_ON in drivers/iommu/intel-iommu.c:785 can be triggered from userspace via
VFIO by calling the VFIO_IOMMU_MAP_DMA ioctl on a vfio device with any address
beyond the addressing capabilities of the IOMMU. The problem is that the ioctl code
calls iommu_iova_to_phys before it calls iommu_map. iommu_map handles the case that
it gets addresses beyond the addressing capabilities of its IOMMU.
intel_iommu_iova_to_phys does not.
This patch fixes iommu_iova_to_phys to return NULL for addresses beyond what the
IOMMU can handle. This in turn causes the ioctl call to fail in iommu_map and
(correctly) return EFAULT to the user with a helpful warning message in the kernel
log.
Signed-off-by: Julian Stecklina <jsteckli@os.inf.tu-dresden.de>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
This patch updates DMAR table header definitions as such enhancement
has been made in ACPICA upstream already. It ports that change to
the Linux source to reduce source code differences between Linux and
ACPICA upstream.
Build test done on x86-64 machine with the following configs enabled:
CONFIG_DMAR_TABLE
CONFIG_IRQ_REMAP
CONFIG_INTEL_IOMMU
This patch does not affect the generation of the Linux kernel binary.
[rjw: Changelog]
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After reset these registers have unknown values.
This might cause problems when evaluating SMMU_GFSR and/or SMMU_CB_FSR
in handlers for combined interrupts.
Signed-off-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Print context fault information when the fault was not handled by
report_iommu_fault.
Signed-off-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
[will: fixed string formatting]
Signed-off-by: Will Deacon <will.deacon@arm.com>
With the right (or wrong;-) definition of v1 SMMU node in DTB it is
possible to trigger a division by zero in arm_smmu_init_domain_context
(if number of context irqs is 0):
if (smmu->version == 1) {
root_cfg->irptndx = atomic_inc_return(&smmu->irptndx);
=> root_cfg->irptndx %= smmu->num_context_irqs;
} else {
Avoid this by checking for num_context_irqs > 0 when probing
for SMMU devices.
Signed-off-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
[will: changed to dev_err on probe failure path]
Signed-off-by: Will Deacon <will.deacon@arm.com>
There is already a check to print a warning if the size of SMMU
address space (calculated from SMMU register values) is greater than
the size of the mapped memory region (e.g. passed via DT to the
driver).
Adapt this check to print also a warning in case the mapped region is
larger than the SMMU address space.
Such a mismatch could be intentional (to fix wrong register values).
If its not intentional (e.g. due to wrong DT information) this will
very likely cause a malfunction of the driver as SMMU_CB_BASE is
derived from the size of the mapped region. The warning helps to
identify the root cause in this case.
Signed-off-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This should ensure that arm-smmu is initialized before other drivers
start handling devices that propably need smmu support.
Signed-off-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Apart from fault handling and page table manipulation, we don't care
about memory ordering between SMMU control registers and normal,
cacheable memory, so use the _relaxed I/O accessors wherever possible.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Use devm_ioremap_resource instead of devm_request_and_ioremap.
This was partly done using the semantic patch
scripts/coccinelle/api/devm_ioremap_resource.cocci
The error-handling code on the call to platform_get_resource was removed
manually, and the initialization of smmu->size was manually moved lower, to
take advantage of the NULL test on res performed by devm_ioremap_resource.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit ebd97be635 ('PCI: remove ARCH_SUPPORTS_MSI kconfig option')
removed the ARCH_SUPPORTS_MSI option which architectures could select
to indicate that they support MSI. Now, all architectures are supposed
to build fine when MSI support is enabled: instead of having the
architecture tell *when* MSI support can be used, it's up to the
architecture code to ensure that MSI support can be enabled.
On x86, commit ebd97be635 removed the following line:
select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
Which meant that MSI support was only available when the local APIC
and I/O APIC were enabled. While this is always true on SMP or x86-64,
it is not necessarily the case on i386 !SMP.
The below patch makes sure that the local APIC and I/O APIC support is
always enabled when MSI support is enabled. To do so, it:
* Ensures the X86_UP_APIC option is not visible when PCI_MSI is
enabled. This is the option that allows, on UP machines, to enable
or not the APIC support. It is already not visible on SMP systems,
or x86-64 systems, for example. We're simply also making it
invisible on i386 MSI systems.
* Ensures that the X86_LOCAL_APIC and X86_IO_APIC options are 'y'
when PCI_MSI is enabled.
Notice that this change requires a change in drivers/iommu/Kconfig to
avoid a recursive Kconfig dependencey. The AMD_IOMMU option selects
PCI_MSI, but was depending on X86_IO_APIC. This dependency is no
longer needed: as soon as PCI_MSI is selected, the presence of
X86_IO_APIC is guaranteed. Moreover, the AMD_IOMMU already depended on
X86_64, which already guaranteed that X86_IO_APIC was enabled, so this
dependency was anyway redundant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: http://lkml.kernel.org/r/1380794354-9079-1-git-send-email-thomas.petazzoni@free-electrons.com
Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The warning for the irq remapping broken check in intel_irq_remapping.c is
pretty pointless. We need the warning, but we know where its comming from, the
stack trace will always be the same, and it needlessly triggers things like
Abrt. This changes the warning to just print a text warning about BIOS being
broken, without the stack trace, then sets the appropriate taint bit. Since we
automatically disable irq remapping, theres no need to contiue making Abrt jump
at this problem
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Joerg Roedel <joro@8bytes.org>
CC: Bjorn Helgaas <bhelgaas@google.com>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
iommu_error class event can be enabled to trigger when an iommu
error occurs. This trace event is intended to be called to report the
error information. Trace information includes driver name, device name,
iova, and flags.
iommu_error:io_page_fault
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The devm_[kzalloc|ioremap] functions allocates data that are released
when a driver detaches. Thus, there is no reason to explicitly call
devm_[kfree|iounmap] in probe or remove functions.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
When enabling LPAE on ARM, phys_addr_t becomes 64 bits wide and printing
a variable of that type using a simple %x format specifier causes the
compiler to complain. Change the format specifier to %pa, which is used
specifically for variables of type phys_addr_t.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Commit 6197ca82 (iommu: Use %pa and %zx instead of casting) introduced the
usage of '%pa', but still kept the '0x', which leads to printing '0x0x'.
Remove the '0x' when '%pa' is used.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Change iommu driver to call unmap trace event. This iommu_map_unmap class
event can be enabled to trigger when iommu unmap iommu ops is called. Trace
information includes iova, physical address (map event only), and size.
Testing:
Added trace calls to iommu_prepare_identity_map() for testing some of the
conditions that are hard to trigger. Here is the trace from the testing:
swapper/0-1 [003] .... 1.854102: unmap: IOMMU: iova=0x00000000cb800000 size=0x400
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Change iommu driver to call map trace event. This iommu_map_unmap class event
can be enabled to trigger when iommu map iommu ops is called. Trace information
includes iova, physical address (map event only), and size.
Testing:
Added trace calls to iommu_prepare_identity_map() for testing some of the
conditions that are hard to trigger. Here is the trace from the testing:
swapper/0-1 [003] .... 1.854102: map: IOMMU: iova=0x00000000cb800000 paddr=0x00000000cf9fffff size=0x400
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Change iommu driver to call detach_device_to_domain trace event. This
iommu_device class event can be enabled to trigger when devices are detached
from a domain. Trace information includes device name.
Testing:
Added trace calls to iommu_prepare_identity_map() for testing some of the
conditions that are hard to trigger. Here is the trace from the testing:
swapper/0-1 [003] .... 1.854102: detach_device_from_domain: IOMMU: device=0000:00:02.0
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Change iommu driver to call attach_device_to_domain trace event. This
iommu_device class event can be enabled to trigger when devices are attached
to a domain. Trace information includes device name.
Testing:
Added trace calls to iommu_prepare_identity_map() for testing some of the
conditions that are hard to trigger. Here is the trace from the testing:
swapper/0-1 [003] .... 1.854102: attach_device_to_domain: IOMMU: device=0000:00:02.0
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Change iommu driver to call remove_device_to_group trace event. This
iommu_group class event can be enabled to trigger when devices get
removed from an iommu group. Trace information includes iommu group id and
device name.
Testing:
Added trace calls to iommu_prepare_identity_map() for testing some of the
conditions that are hard to trigger. Here is the trace from the testing:
swapper/0-1 [003] .... 1.854101: remove_device_from_group: IOMMU: groupID=0 device=0000:00:02.0
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Change iommu driver to call add_device_to_group trace event. This iommu_group
class event can be enabled to trigger when devices get added to an iommu group.
Trace information includes iommu group id and device name.
Testing:
The following is trace is generated when intel-iommu driver adds devices to
to iommu groups during boot-time during its initialization:
swapper/0-1 [003] .... 1.854793: add_device_to_group: IOMMU: groupID=0 device=0000:00:00.0
swapper/0-1 [003] .... 1.854797: add_device_to_group: IOMMU: groupID=1 device=0000:00:02.0
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Add tracing feature to iommu to report various iommu events. Classes
iommu_group, iommu_device, and iommu_map_unmap are defined.
iommu_group class events can be enabled to trigger when devices get added
to and removed from an iommu group. Trace information includes iommu group
id and device name.
iommu:add_device_to_group
iommu:remove_device_from_group
iommu_device class events can be enabled to trigger when devices are attached
to and detached from a domain. Trace information includes device name.
iommu:attach_device_to_domain
iommu:detach_device_from_domain
iommu_map_unmap class events can be enabled to trigger when iommu map and
unmap iommu ops. Trace information includes iova, physical address (map event
only), and size.
iommu:map
iommu:unmap
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
We currently reset and enable the SMMU before the device has finished
being probed, so if we fail later on (for example, because we couldn't
request a global irq successfully) then we will leave the device in an
active state.
This patch delays the reset and enabling of the SMMU hardware until
probing has completed.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The extra semi-colon on the end breaks the test.
Cc: <stable@vger.kernel.org>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Unsigned char is never equal to -1.
Cc: <stable@vger.kernel.org>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This round the updates contain:
* A new driver for the Freescale PAMU IOMMU from Varun Sethi.
This driver has cooked for a while and required changes to the
IOMMU-API and infrastructure that were already merged before.
* Updates for the ARM-SMMU driver from Will Deacon
* Various fixes, the most important one is probably a fix from
Alex Williamson for a memory leak in the VT-d page-table
freeing code
In summary not all that much. The biggest part in the diffstat is the
new PAMU driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=UZoD
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU Updates from Joerg Roedel:
"This round the updates contain:
- A new driver for the Freescale PAMU IOMMU from Varun Sethi.
This driver has cooked for a while and required changes to the
IOMMU-API and infrastructure that were already merged before.
- Updates for the ARM-SMMU driver from Will Deacon
- Various fixes, the most important one is probably a fix from Alex
Williamson for a memory leak in the VT-d page-table freeing code
In summary not all that much. The biggest part in the diffstat is the
new PAMU driver"
* tag 'iommu-updates-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
intel-iommu: Fix leaks in pagetable freeing
iommu/amd: Fix resource leak in iommu_init_device()
iommu/amd: Clean up unnecessary MSI/MSI-X capability find
iommu/arm-smmu: Simplify VMID and ASID allocation
iommu/arm-smmu: Don't use VMIDs for stage-1 translations
iommu/arm-smmu: Tighten up global fault reporting
iommu/arm-smmu: Remove broken big-endian check
iommu/fsl: Remove unnecessary 'fsl-pamu' prefixes
iommu/fsl: Fix whitespace problems noticed by git-am
iommu/fsl: Freescale PAMU driver and iommu implementation.
iommu/fsl: Add additional iommu attributes required by the PAMU driver.
powerpc: Add iommu domain pointer to device archdata
iommu/exynos: Remove dead code (set_prefbuf)
The driver core clears the driver data to NULL after device_release or
on probe failure. Thus, it is not needed to manually clear the device
driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: David Brown <davidb@codeaurora.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Suman Anna <s-anna@ti.com>
Acked-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This branch includes a single cleanup patch which removes redundant
error-handling for platform_get_resource().
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=S+q6
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.12-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup
From: Stephen Warren:
ARM: tegra: cleanups for 3.12
This branch includes a single cleanup patch which removes redundant
error-handling for platform_get_resource().
* tag 'tegra-for-3.12-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
tegra: simplify use of devm_ioremap_resource
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Remove unneeded error handling on the result of a call to
platform_get_resource when the value is passed to devm_ioremap_resource.
A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression pdev,res,n,e,e1;
expression ret != 0;
identifier l;
@@
- res = platform_get_resource(pdev, IORESOURCE_MEM, n);
... when != res
- if (res == NULL) { ... \(goto l;\|return ret;\) }
... when != res
+ res = platform_get_resource(pdev, IORESOURCE_MEM, n);
e = devm_ioremap_resource(e1, res);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
At best the current code only seems to free the leaf pagetables and
the root. If you're unlucky enough to have a large gap (like any
QEMU guest with more than 3G of memory), only the first chunk of leaf
pagetables are freed (plus the root). This is a massive memory leak.
This patch re-writes the pagetable freeing function to use a
recursive algorithm and manages to not only free all the pagetables,
but does it without any apparent performance loss versus the current
broken version.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
PCI core will initialize device MSI/MSI-X capability in
pci_msi_init_pci_dev(). So device driver should use
pci_dev->msi_cap/msix_cap to determine whether the device
support MSI/MSI-X instead of using
pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access
to PCIe device config space again will consume more time.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Joerg Roedel <joro@8bytes.org>
We only use ASIDs and VMIDs to identify individual stage-1 and stage-2
context-banks respectively, so rather than allocate these separately
from the context-banks, just calculate them based on the context bank
index.
Note that VMIDs are offset by 1, since VMID 0 is reserved for stage-1.
This doesn't cause us any issues with the numberspaces, since the
maximum number of context banks is half the minimum number of VMIDs.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Although permitted by the architecture, using VMIDs for stage-1
translations causes a complete nightmare for hypervisors, who end up
having to virtualise the VMID space across VMs, which may be using
multiple VMIDs each.
To make life easier for hypervisors (which might just decide not to
support this VMID virtualisation), this patch reworks the stage-1
context-bank TLB invalidation so that:
- Stage-1 mappings are marked non-global in the ptes
- Each Stage-1 context-bank is assigned an ASID in TTBR0
- VMID 0 is reserved for Stage-1 context-banks
This allows the hypervisor to overwrite the Stage-1 VMID in the CBAR
when trapping the write from the guest.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
On systems which use a single, combined irq line for the SMMU, context
faults may result in us spuriously reporting global faults with zero
status registers.
This patch fixes up the fsr checks in both the context and global fault
interrupt handlers, so that we only report the fault if the fsr
indicates something did indeed go awry.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The bottom word of the pgd should always be written to the low half of
the TTBR, so we don't need to swap anything for big-endian.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Following is a brief description of the PAMU hardware:
PAMU determines what action to take and whether to authorize the action on
the basis of the memory address, a Logical IO Device Number (LIODN), and
PAACT table (logically) indexed by LIODN and address. Hardware devices which
need to access memory must provide an LIODN in addition to the memory address.
Peripheral Access Authorization and Control Tables (PAACTs) are the primary
data structures used by PAMU. A PAACT is a table of peripheral access
authorization and control entries (PAACE).Each PAACE defines the range of
I/O bus address space that is accessible by the LIOD and the associated access
capabilities.
There are two types of PAACTs: primary PAACT (PPAACT) and secondary PAACT
(SPAACT).A given physical I/O device may be able to act as one or more
independent logical I/O devices (LIODs). Each such logical I/O device is
assigned an identifier called logical I/O device number (LIODN). A LIODN is
allocated a contiguous portion of the I/O bus address space called the DSA window
for performing DSA operations. The DSA window may optionally be divided into
multiple sub-windows, each of which may be used to map to a region in system
storage space. The first sub-window is referred to as the primary sub-window
and the remaining are called secondary sub-windows.
This patch provides the PAMU driver (fsl_pamu.c) and the corresponding IOMMU
API implementation (fsl_pamu_domain.c). The PAMU hardware driver (fsl_pamu.c)
has been derived from the work done by Ashish Kalra and Timur Tabi.
[For iommu group support]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Timur Tabi <timur@tabi.org>
Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
exynos_sysmmu_set_prefbuf() is not called any where.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Cho KyongHo <pullip.cho@samsung.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Two header files exist in mach-msm's include/mach directory that
are only used by the MSM iommu driver. Move these files to the
iommu driver directory and prefix them with "msm_". This allows
us to compile the MSM iommu driver on multi-platform kernels.
Acked-by: Joerg Roedel <joro@8bytes.org>
Cc: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
A few updates this time, most important and exiciting (to me) is:
* The new ARM SMMU driver. This is a common IOMMU driver that will
hopefully be used in a lot of upcoming ARM chips. So the mess in the
past where every SOC had its own IOMMU will be over.
Besides that:
* Some important fixes in the IOMMU unmap path. There are fixes in the
common code and also in the AMD IOMMU driver.
* Other random fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=oJr3
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
"A few updates this time, most important and exiciting (to me) is:
- The new ARM SMMU driver. This is a common IOMMU driver that will
hopefully be used in a lot of upcoming ARM chips. So the mess in
the past where every SOC had its own IOMMU will be over.
Besides that:
- Some important fixes in the IOMMU unmap path. There are fixes in
the common code and also in the AMD IOMMU driver.
- Other random fixes"
* tag 'iommu-updates-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
MAINTAINERS: add entry for ARM system MMU driver
iommu/arm: Add support for ARM Ltd. System MMU architecture
documentation/iommu: Add description of ARM System MMU binding
iommu: Use %pa and %zx instead of casting
iommu/amd: Only unmap large pages from the first pte
iommu: Fix compiler warning on pr_debug
iommu/amd: Fix memory leak in free_pagetable
iommu: Split iommu_unmaps
iommu/{vt-d,amd}: Remove multifunction assumption around grouping
iommu/omap: fix checkpatch warnings in omap iommu code
iommu/omap: fix printk formats for dma_addr_t
iommu/vt-d: DMAR reporting table needs at least one DRHD
iommu/vt-d: Downgrade the warning if enabling irq remapping fails
Fix two obvious problems:
1. We have registered msm_iommu_driver first, and need unregister it
when registered msm_iommu_ctx_driver fail
2. We don't need to kfree drvdata before kzalloc was successful.
[akpm@linux-foundation.org: remove now-unneeded initialization of ctx_drvdata, remove unneeded braces]
Signed-off-by: Libo Chen <libo.chen@huawei.com>
Acked-by: David Brown <davidb@codeaurora.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull powerpc updates from Ben Herrenschmidt:
"This is the powerpc changes for the 3.11 merge window. In addition to
the usual bug fixes and small updates, the main highlights are:
- Support for transparent huge pages by Aneesh Kumar for 64-bit
server processors. This allows the use of 16M pages as transparent
huge pages on kernels compiled with a 64K base page size.
- Base VFIO support for KVM on power by Alexey Kardashevskiy
- Wiring up of our nvram to the pstore infrastructure, including
putting compressed oopses in there by Aruna Balakrishnaiah
- Move, rework and improve our "EEH" (basically PCI error handling
and recovery) infrastructure. It is no longer specific to pseries
but is now usable by the new "powernv" platform as well (no
hypervisor) by Gavin Shan.
- I fixed some bugs in our math-emu instruction decoding and made it
usable to emulate some optional FP instructions on processors with
hard FP that lack them (such as fsqrt on Freescale embedded
processors).
- Support for Power8 "Event Based Branch" facility by Michael
Ellerman. This facility allows what is basically "userspace
interrupts" for performance monitor events.
- A bunch of Transactional Memory vs. Signals bug fixes and HW
breakpoint/watchpoint fixes by Michael Neuling.
And more ... I appologize in advance if I've failed to highlight
something that somebody deemed worth it."
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (156 commits)
pstore: Add hsize argument in write_buf call of pstore_ftrace_call
powerpc/fsl: add MPIC timer wakeup support
powerpc/mpic: create mpic subsystem object
powerpc/mpic: add global timer support
powerpc/mpic: add irq_set_wake support
powerpc/85xx: enable coreint for all the 64bit boards
powerpc/8xx: Erroneous double irq_eoi() on CPM IRQ in MPC8xx
powerpc/fsl: Enable CONFIG_E1000E in mpc85xx_smp_defconfig
powerpc/mpic: Add get_version API both for internal and external use
powerpc: Handle both new style and old style reserve maps
powerpc/hw_brk: Fix off by one error when validating DAWR region end
powerpc/pseries: Support compression of oops text via pstore
powerpc/pseries: Re-organise the oops compression code
pstore: Pass header size in the pstore write callback
powerpc/powernv: Fix iommu initialization again
powerpc/pseries: Inform the hypervisor we are using EBB regs
powerpc/perf: Add power8 EBB support
powerpc/perf: Core EBB support for 64-bit book3s
powerpc/perf: Drop MMCRA from thread_struct
powerpc/perf: Don't enable if we have zero events
...
PCI device hotplug
- Add pci_alloc_dev() interface (Gu Zheng)
- Add pci_bus_get()/put() for reference counting (Jiang Liu)
- Fix SR-IOV reference count issues (Jiang Liu)
- Remove unused acpi_pci_roots list (Jiang Liu)
MSI
- Conserve interrupt resources on x86 (Alexander Gordeev)
AER
- Force fatal severity when component has been reset (Betty Dall)
- Reset link below Root Port as well as Downstream Port (Betty Dall)
- Fix "Firmware first" flag setting (Bjorn Helgaas)
- Don't parse HEST for non-PCIe devices (Bjorn Helgaas)
ASPM
- Warn when we can't disable ASPM as driver requests (Bjorn Helgaas)
Miscellaneous
- Add CircuitCo PCI IDs (Darren Hart)
- Add AMD CZ SATA and SMBus PCI IDs (Shane Huang)
- Work around Ivytown NTB BAR size issue (Jon Mason)
- Detect invalid initial BAR values (Kevin Hao)
- Add pcibios_release_device() (Sebastian Ott)
- Fix powerpc & sparc PCI_UNKNOWN power state usage (Bjorn Helgaas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=X3Lo
-----END PGP SIGNATURE-----
Merge tag 'pci-v3.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI changes from Bjorn Helgaas:
"PCI device hotplug
- Add pci_alloc_dev() interface (Gu Zheng)
- Add pci_bus_get()/put() for reference counting (Jiang Liu)
- Fix SR-IOV reference count issues (Jiang Liu)
- Remove unused acpi_pci_roots list (Jiang Liu)
MSI
- Conserve interrupt resources on x86 (Alexander Gordeev)
AER
- Force fatal severity when component has been reset (Betty Dall)
- Reset link below Root Port as well as Downstream Port (Betty Dall)
- Fix "Firmware first" flag setting (Bjorn Helgaas)
- Don't parse HEST for non-PCIe devices (Bjorn Helgaas)
ASPM
- Warn when we can't disable ASPM as driver requests (Bjorn Helgaas)
Miscellaneous
- Add CircuitCo PCI IDs (Darren Hart)
- Add AMD CZ SATA and SMBus PCI IDs (Shane Huang)
- Work around Ivytown NTB BAR size issue (Jon Mason)
- Detect invalid initial BAR values (Kevin Hao)
- Add pcibios_release_device() (Sebastian Ott)
- Fix powerpc & sparc PCI_UNKNOWN power state usage (Bjorn Helgaas)"
* tag 'pci-v3.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits)
MAINTAINERS: Add ACPI folks for ACPI-related things under drivers/pci
PCI: Add CircuitCo vendor ID and subsystem ID
PCI: Use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)
PCI: Return early on allocation failures to unindent mainline code
PCI: Simplify IOV implementation and fix reference count races
PCI: Drop redundant setting of bus->is_added in virtfn_add_bus()
unicore32/PCI: Remove redundant call of pci_bus_add_devices()
m68k/PCI: Remove redundant call of pci_bus_add_devices()
PCI / ACPI / PM: Use correct power state strings in messages
PCI: Fix comment typo for pcie_pme_remove()
PCI: Rename pci_release_bus_bridge_dev() to pci_release_host_bridge_dev()
PCI: Fix refcount issue in pci_create_root_bus() error recovery path
ia64/PCI: Clean up pci_scan_root_bus() usage
PCI/AER: Reset link for devices below Root Port or Downstream Port
ACPI / APEI: Force fatal AER severity when component has been reset
PCI/AER: Remove "extern" from function declarations
PCI/AER: Move AER severity defines to aer.h
PCI/AER: Set dev->__aer_firmware_first only for matching devices
PCI/AER: Factor out HEST device type matching
PCI/AER: Don't parse HEST table for non-PCIe devices
...
Pull perf updates from Ingo Molnar:
"Kernel improvements:
- watchdog driver improvements by Li Zefan
- Power7 CPI stack events related improvements by Sukadev Bhattiprolu
- event multiplexing via hrtimers and other improvements by Stephane
Eranian
- kernel stack use optimization by Andrew Hunter
- AMD IOMMU uncore PMU support by Suravee Suthikulpanit
- NMI handling rate-limits by Dave Hansen
- various hw_breakpoint fixes by Oleg Nesterov
- hw_breakpoint overflow period sampling and related signal handling
fixes by Jiri Olsa
- Intel Haswell PMU support by Andi Kleen
Tooling improvements:
- Reset SIGTERM handler in workload child process, fix from David
Ahern.
- Makefile reorganization, prep work for Kconfig patches, from Jiri
Olsa.
- Add automated make test suite, from Jiri Olsa.
- Add --percent-limit option to 'top' and 'report', from Namhyung
Kim.
- Sorting improvements, from Namhyung Kim.
- Expand definition of sysfs format attribute, from Michael Ellerman.
Tooling fixes:
- 'perf tests' fixes from Jiri Olsa.
- Make Power7 CPI stack events available in sysfs, from Sukadev
Bhattiprolu.
- Handle death by SIGTERM in 'perf record', fix from David Ahern.
- Fix printing of perf_event_paranoid message, from David Ahern.
- Handle realloc failures in 'perf kvm', from David Ahern.
- Fix divide by 0 in variance, from David Ahern.
- Save parent pid in thread struct, from David Ahern.
- Handle JITed code in shared memory, from Andi Kleen.
- Fixes for 'perf diff', from Jiri Olsa.
- Remove some unused struct members, from Jiri Olsa.
- Add missing liblk.a dependency for python/perf.so, fix from Jiri
Olsa.
- Respect CROSS_COMPILE in liblk.a, from Rabin Vincent.
- No need to do locking when adding hists in perf report, only 'top'
needs that, from Namhyung Kim.
- Fix alignment of symbol column in in the hists browser (top,
report) when -v is given, from NAmhyung Kim.
- Fix 'perf top' -E option behavior, from Namhyung Kim.
- Fix bug in isupper() and islower(), from Sukadev Bhattiprolu.
- Fix compile errors in bp_signal 'perf test', from Sukadev
Bhattiprolu.
... and more things"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (102 commits)
perf/x86: Disable PEBS-LL in intel_pmu_pebs_disable()
perf/x86: Fix shared register mutual exclusion enforcement
perf/x86/intel: Support full width counting
x86: Add NMI duration tracepoints
perf: Drop sample rate when sampling is too slow
x86: Warn when NMI handlers take large amounts of time
hw_breakpoint: Introduce "struct bp_cpuinfo"
hw_breakpoint: Simplify *register_wide_hw_breakpoint()
hw_breakpoint: Introduce cpumask_of_bp()
hw_breakpoint: Simplify the "weight" usage in toggle_bp_slot() paths
hw_breakpoint: Simplify list/idx mess in toggle_bp_slot() paths
perf/x86/intel: Add mem-loads/stores support for Haswell
perf/x86/intel: Support Haswell/v4 LBR format
perf/x86/intel: Move NMI clearing to end of PMI handler
perf/x86/intel: Add Haswell PEBS support
perf/x86/intel: Add simple Haswell PMU support
perf/x86/intel: Add Haswell PEBS record support
perf/x86/intel: Fix sparse warning
perf/x86/amd: AMD IOMMU Performance Counter PERF uncore PMU implementation
perf/x86/amd: Add IOMMU Performance Counter resource management
...
This patch adds support for SMMUs implementing the ARM System MMU
architecture versions 1 or 2. Both arm and arm64 are supported, although
the v7s descriptor format is not used.
Cc: Rob Herring <robherring2@gmail.com>
Cc: Andreas Herrmann <andreas.herrmann@calxeda.com>
Cc: Olav Haugan <ohaugan@codeaurora.org>
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Calling clk_set_min_rate() is no better than just calling
clk_set_rate() because MSM clock code already takes care of
calling the min_rate ops if the clock really needs
clk_set_min_rate() called on it.
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Add calls to clk_prepare and unprepare so that MSM can migrate to
the common clock framework. We never unprepare the clocks until
driver remove because the clocks are enabled and disabled in irq
context. Finer grained power management is possible in the future
via runtime power management techniques.
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
printk supports using %pa for phys_addr_t and
%zx for size_t so use those instead of %lx and
casts to unsigned long.
Other miscellaneous changes around this:
Always use 0x%zx for size instead of one use of decimal.
Coalesce format and align arguments.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
If we use a large mapping, the expectation is that only unmaps from
the first pte in the superpage are supported. Unmaps from offsets
into the superpage should fail (ie. return zero sized unmap). In the
current code, unmapping from an offset clears the size of the full
mapping starting from an offset. For instance, if we map a 16k
physically contiguous range at IOVA 0x0 with a large page, then
attempt to unmap 4k at offset 12k, 4 ptes are cleared (12k - 28k) and
the unmap returns 16k unmapped. This potentially incorrectly clears
valid mappings and confuses drivers like VFIO that use the unmap size
to release pinned pages.
Fix by refusing to unmap from offsets into the page.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The IOMMU pagetables can have up to 6 levels, but the code
in free_pagetable() only releases the first 3 levels. Fix
this leak by releasing all levels.
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
iommu_map splits requests into pages that the iommu driver reports
that it can handle. The iommu_unmap path does not do the same. This
can cause problems not only from callers that might expect the same
behavior as the map path, but even from the failure path of iommu_map,
should it fail at a point where it has mapped and needs to unwind a
set of pages that the iommu driver cannot handle directly. amd_iommu,
for example, will BUG_ON if asked to unmap a non power of 2 size.
Fix this by extracting and generalizing the sizing code from the
iommu_map path and use it for both map and unmap.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
If a device is multifunction and does not have ACS enabled then we
assume that the entire package lacks ACS and use function 0 as the
base of the group. The PCIe spec however states that components are
permitted to implement ACS on some, none, or all of their applicable
functions. It's therefore conceivable that function 0 may be fully
independent and support ACS while other functions do not. Instead
use the lowest function of the slot that does not have ACS enabled
as the base of the group. This may be the current device, which is
intentional. So long as we use a consistent algorithm, all the
non-ACS functions will be grouped together and ACS functions will
get separate groups.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
This patch fixes the checkpatch warnings in omap iommu
code, most of them are related to broken strings.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Fixed the following printk format warnings for dma_addr_t
for OMAP IOMMU.
drivers/iommu/omap-iommu.c: In function 'omap_iommu_iova_to_phys':
drivers/iommu/omap-iommu.c:1238:4: warning: format '%lx' expects type 'long unsigned int', but argument 4 has type 'dma_addr_t'
drivers/iommu/omap-iommu.c:1245:4: warning: format '%lx' expects type 'long unsigned int', but argument 4 has type 'dma_addr_t'
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
In intel vt-d spec , chapter 8.1 , DMA Remapping Reporting Structure.
In the end of the table, it says:
Remapping Structures[]
-
A list of structures. The list will contain one or
more DMA Remapping Hardware Unit Definition
(DRHD) structures, and zero or more Reserved
Memory Region Reporting (RMRR) and Root Port
ATS Capability Reporting (ATSR) structures.
These structures are described below.
So, there should be at least one DRHD structure in DMA Remapping
reporting table. If there is no DRHD found, a warning is necessary.
Signed-off-by: Li, Zhen-Hua <zhen-hual@hp.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
This triggers on a MacBook Pro.
See https://bugzilla.redhat.com/show_bug.cgi?id=948262 for
the problem report.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The enables VFIO on the pSeries platform, enabling user space
programs to access PCI devices directly.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This initializes IOMMU groups based on the IOMMU configuration
discovered during the PCI scan on POWERNV (POWER non virtualized)
platform. The IOMMU groups are to be used later by the VFIO driver,
which is used for PCI pass through.
It also implements an API for mapping/unmapping pages for
guest PCI drivers and providing DMA window properties.
This API is going to be used later by QEMU-VFIO to handle
h_put_tce hypercalls from the KVM guest.
The iommu_put_tce_user_mode() does only a single page mapping
as an API for adding many mappings at once is going to be
added later.
Although this driver has been tested only on the POWERNV
platform, it should work on any platform which supports
TCE tables. As h_put_tce hypercall is received by the host
kernel and processed by the QEMU (what involves calling
the host kernel again), performance is not the best -
circa 220MB/s on 10Gb ethernet network.
To enable VFIO on POWER, enable SPAPR_TCE_IOMMU config
option and configure VFIO as required.
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Add functionality to check the availability of the AMD IOMMU Performance
Counters and export this functionality to other core drivers, such as in this
case, a perf AMD IOMMU PMU. This feature is not bound to any specific AMD
family/model other than the presence of the IOMMU with P-C enabled.
The AMD IOMMU P-C support static counting only at this time.
Signed-off-by: Steven Kinney <steven.kinney@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1370466709-3212-2-git-send-email-suravee.suthikulpanit@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Current multiple-MSI implementation does not take into account actual
number of requested MSIs and always rounds that number to a larger
power-of-two value. Yet, the number of MSIs a PCI device could send (and
therefore the number of messages a device driver could request) may be
smaller. As result, resources allocated for extra MSIs are just wasted.
This update takes advantage of 'msi_desc::nvec_used' field introduced with
generic MSI code to track the number of requested and used MSIs. As
result, resources associated with interrupts are conserved. Of those
resources most noticeable are x86 interrupt vectors.
The initial version of this fix also conserved IRTEs, but Jan noticed that
a malfunctioning PCI device might send a message number it did not claim
and thus refer to an IRTE it does not own. To avoid this security hole,
as many IRTEs are reserved as the device could possibly send.
[bhelgaas: changelog, rename to "nvec_used"]
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The updates are mostly about the x86 IOMMUs this time. Exceptions are
the groundwork for the PAMU IOMMU from Freescale (for a PPC platform)
and an extension to the IOMMU group interface. On the x86 side this
includes a workaround for VT-d to disable interrupt remapping on broken
chipsets. On the AMD-Vi side the most important new feature is a kernel
command-line interface to override broken information in IVRS ACPI
tables and get interrupt remapping working this way. Besides that there
are small fixes all over the place.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=MVc/
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
"The updates are mostly about the x86 IOMMUs this time.
Exceptions are the groundwork for the PAMU IOMMU from Freescale (for a
PPC platform) and an extension to the IOMMU group interface.
On the x86 side this includes a workaround for VT-d to disable
interrupt remapping on broken chipsets. On the AMD-Vi side the most
important new feature is a kernel command-line interface to override
broken information in IVRS ACPI tables and get interrupt remapping
working this way.
Besides that there are small fixes all over the place."
* tag 'iommu-updates-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (24 commits)
iommu/tegra: Fix printk formats for dma_addr_t
iommu: Add a function to find an iommu group by id
iommu/vt-d: Remove warning for HPET scope type
iommu: Move swap_pci_ref function to drivers/iommu/pci.h.
iommu/vt-d: Disable translation if already enabled
iommu/amd: fix error return code in early_amd_iommu_init()
iommu/AMD: Per-thread IOMMU Interrupt Handling
iommu: Include linux/err.h
iommu/amd: Workaround for ERBT1312
iommu/amd: Document ivrs_ioapic and ivrs_hpet parameters
iommu/amd: Don't report firmware bugs with cmd-line ivrs overrides
iommu/amd: Add ioapic and hpet ivrs override
iommu/amd: Add early maps for ioapic and hpet
iommu/amd: Extend IVRS special device data structure
iommu/amd: Move add_special_device() to __init
iommu: Fix compile warnings with forward declarations
iommu/amd: Properly initialize irq-table lock
iommu/amd: Use AMD specific data structure for irq remapping
iommu/amd: Remove map_sg_no_iommu()
iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets
...
Fix printk formats for dma_addr_t:
drivers/iommu/tegra-smmu.c: In function 'smmu_iommu_iova_to_phys':
>> drivers/iommu/tegra-smmu.c:774:2: warning: format '%lx' expects argument of type 'long unsigned int', but argument 4 has type 'dma_addr_t' [-Wformat]
--
drivers/iommu/tegra-gart.c: In function 'gart_iommu_iova_to_phys':
>> drivers/iommu/tegra-gart.c:298:3: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat]
Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Pull x86 mm changes from Ingo Molnar:
"Misc smaller changes all over the map"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/iommu/dmar: Remove warning for HPET scope type
x86/mm/gart: Drop unnecessary check
x86/mm/hotplug: Put kernel_physical_mapping_remove() declaration in CONFIG_MEMORY_HOTREMOVE
x86/mm/fixmap: Remove unused FIX_CYCLONE_TIMER
x86/mm/numa: Simplify some bit mangling
x86/mm: Re-enable DEBUG_TLBFLUSH for X86_32
x86/mm/cpa: Cleanup split_large_page() and its callee
x86: Drop always empty .text..page_aligned section
As IOMMU groups are exposed to the user space by their numbers,
the user space can use them in various kernel APIs so the kernel
might need an API to find a group by its ID.
As an example, QEMU VFIO on PPC64 platform needs it to associate
a logical bus number (LIOBN) with a specific IOMMU group in order
to support in-kernel handling of DMA map/unmap requests.
The patch adds the iommu_group_get_by_id(id) function which performs
such search.
v2: fixed reference counting.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
ACPI_DMAR_SCOPE_TYPE_HPET is parsed by ir_parse_ioapic_hpet_scope() and
should not be flagged as an unsupported type.
Signed-off-by: Linn Crosetto <linn@hp.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The swap_pci_ref function is used by the IOMMU API code for
swapping pci device pointers, while determining the iommu
group for the device.
Currently this function was being implemented for different
IOMMU drivers. This patch moves the function to a new file,
drivers/iommu/pci.h so that the implementation can be
shared across various IOMMU drivers.
Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
This patch disables translation(dma-remapping) before its initialization
if it is already enabled.
This is needed for kexec/kdump boot. If dma-remapping is enabled in the
first kernel, it need to be disabled before initializing its page table
during second kernel boot. Wei Hu also reported that this is needed
when second kernel boots with intel_iommu=off.
Basically iommu->gcmd is used to know whether translation is enabled or
disabled, but it is always zero at boot time even when translation is
enabled since iommu->gcmd is initialized without considering such a
case. Therefor this patch synchronizes iommu->gcmd value with global
command register when iommu structure is allocated.
Signed-off-by: Takao Indoh <indou.takao@jp.fujitsu.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Fix to return -ENOMEM int the memory alloc error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
In the current interrupt handling scheme, there are as many threads as
the number of IOMMUs. Each thread is created and assigned to an IOMMU at
the time of registering interrupt handlers (request_threaded_irq).
When an IOMMU HW generates an interrupt, the irq handler (top half) wakes up
the corresponding thread to process event and PPR logs of all IOMMUs
starting from the 1st IOMMU.
In the system with multiple IOMMU,this handling scheme complicates the
synchronization of the IOMMU data structures and status registers as
there could be multiple threads competing for the same IOMMU while
the other IOMMU could be left unhandled.
To simplify, this patch is proposing a different interrupt handling scheme
by having each thread only managing interrupts of the corresponding IOMMU.
This can be achieved by passing the struct amd_iommu when registering the
interrupt handlers. This structure is unique for each IOMMU and can be used
by the bottom half thread to identify the IOMMU to be handled instead
of calling for_each_iommu. Besides this also eliminate the needs to lock
the IOMMU for processing event and PPR logs.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Work around an IOMMU hardware bug where clearing the
EVT_INT or PPR_INT bit in the status register may race with
the hardware trying to set it again. When not handled the
bit might not be cleared and we lose all future event or ppr
interrupts.
Reported-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <joro@8bytes.org>
When the IVRS entries for IOAPIC and HPET are overridden on
the kernel command line, a problem detected in the check
function might not be a firmware bug anymore. So disable
the firmware bug reporting if the user provided valid
ivrs_ioapic or ivrs_hpet entries on the command line.
Reviewed-by: Shuah Khan <shuahkhan@gmail.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Add two new kernel commandline parameters ivrs_ioapic and
ivrs_hpet to override the Id->DeviceId mapping from the IVRS
ACPI table. This can be used to work around broken BIOSes to
get interrupt remapping working on AMD systems.
Tested-by: Borislav Petkov <bp@suse.de>
Tested-by: Suravee Suthikulanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Shuah Khan <shuahkhan@gmail.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
This is needed in a later patch were ioapic_map and hpet_map
entries are created before the slab allocator is initialized
(and thus add_special_device() can't be used).
Reviewed-by: Shuah Khan <shuahkhan@gmail.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
This patch extends the devid_map data structure to allow
ioapic and hpet entries in ivrs to be overridden on the
kernel command line.
Reviewed-by: Shuah Khan <shuahkhan@gmail.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The function is only called by other __init functions, so it
can be moved to __init too.
Reviewed-by: Shuah Khan <shuahkhan@gmail.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
For compatibility reasons the irq remapping code for the AMD
IOMMU used the same per-irq data structure as the Intel
implementation. Now that support for the AMD specific data
structure is upstream we can use this one instead.
Reviewed-by: Shuah Khan <shuahkhan@gmail.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
This function was intended as a fall-back if the map_sg
function is called for a device not mapped by the IOMMU.
Since the AMD IOMMU driver uses per-device dma_ops this can
never happen. So this function isn't needed anymore.
Reviewed-by: Shuah Khan <shuahkhan@gmail.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
A few years back intel published a spec update:
http://www.intel.com/content/dam/doc/specification-update/5520-and-5500-chipset-ioh-specification-update.pdf
For the 5520 and 5500 chipsets which contained an errata (specificially errata
53), which noted that these chipsets can't properly do interrupt remapping, and
as a result the recommend that interrupt remapping be disabled in bios. While
many vendors have a bios update to do exactly that, not all do, and of course
not all users update their bios to a level that corrects the problem. As a
result, occasionally interrupts can arrive at a cpu even after affinity for that
interrupt has be moved, leading to lost or spurrious interrupts (usually
characterized by the message:
kernel: do_IRQ: 7.71 No irq handler for vector (irq -1)
There have been several incidents recently of people seeing this error, and
investigation has shown that they have system for which their BIOS level is such
that this feature was not properly turned off. As such, it would be good to
give them a reminder that their systems are vulnurable to this problem. For
details of those that reported the problem, please see:
https://bugzilla.redhat.com/show_bug.cgi?id=887006
[ Joerg: Removed CONFIG_IRQ_REMAP ifdef from early-quirks.c ]
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Prarit Bhargava <prarit@redhat.com>
CC: Don Zickus <dzickus@redhat.com>
CC: Don Dutile <ddutile@redhat.com>
CC: Bjorn Helgaas <bhelgaas@google.com>
CC: Asit Mallick <asit.k.mallick@intel.com>
CC: David Woodhouse <dwmw2@infradead.org>
CC: linux-pci@vger.kernel.org
CC: Joerg Roedel <joro@8bytes.org>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Arkadiusz Miśkiewicz <arekm@maven.pl>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Each iommu window can have access permissions associated with it. Extended the
window_enable API to incorporate window access permissions.
In case of PAMU each window can have its specific set of permissions.
Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
This is required in case of PAMU, as it can support a window size of up
to 64G (even on 32bit).
Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Current driver does not clear the IOMMU event log interrupt bit
in the IOMMU status register after processing an interrupt.
This causes the IOMMU hardware to generate event log interrupt only once.
This has been observed in both IOMMU v1 and V2 hardware.
This patch clears the bit by writing 1 to bit 1 of the IOMMU
status register (MMIO Offset 2020h)
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Here are some fixes which have collected since Linux v3.9-rc1. The most
important one fixes a long-standing regressen which make re-hotplugged
devices unusable when AMD IOMMU is used. The other patches fix build
issues (build regression on OMAP and a section mismatch). One patch just
removes a duplicate header include.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJRUrpyAAoJECvwRC2XARrjOQcQAMN2Rza2Ios/MgPmIPI5e+76
ogSYAnl3biSeYe7pLYzOOwmzIIGx8N/GOzM+XsoV8HF4y8dbPNrrNCKpAwweJrcS
RQUUw22+HZglg3nR8gVWuwx1BU6Gy8AukzjrAgBIIuKpxOloFGYDJD+NXn3ctq/v
rULPXc7M6bZDIoXu4Mjv0otCdh+CpTYl24TNs59vEJIibipQC5PKLzqCT6AhA6qP
4G3irtrlju63B2ItVAWDI1Ge2JF00qpXMhJKojCimv8bqooaG+XXOUg3ip4G61hp
6HgYkfozf081Y4vy4ojpu7RfysemA10gYy60f/g+uaMLvjCG5eLITlghUTzo7l30
8sTD6zB4V98tPK2V5CQ6S6WoVyd0Hq7u0ugt2nmVmBHk7VVKcc4JmViKxeNTWeOa
N/uKNoKD+Kb+ma0mSG/ig5hOHpBeOXrPDyDSDtbR+s7G6TRpmd5JKOs+Mjv0HhC1
Ny+NanFJlSWECpK3uhHQ68wQ9e75XppbEJfrUfdrsMBFbQlpE2lwvakeiuzqHLmO
/ZVyyAKXe0R4NEVNlqf2kOVQznBKIX+88Jn4NeCPR2go70kHLrWKCVrH4flv0qD9
nj08Ko8IY+jW+oXpcH7jZLTxdqVo031BAPV0hHoJvxbDAl0QyGu/B4VFWrVnesnM
mpx0vCbObLUdlkp9bXWK
=/K5U
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"Here are some fixes which have collected since Linux v3.9-rc1.
The most important one fixes a long-standing regressen which make
re-hotplugged devices unusable when AMD IOMMU is used.
The other patches fix build issues (build regression on OMAP and a
section mismatch). One patch just removes a duplicate header include."
* tag 'iommu-fixes-v3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Make sure dma_ops are set for hotplug devices
x86, io_apic: remove duplicated include from irq_remapping.c
iommu: OMAP: build only on OMAP2+
amd_iommu_init: remove __init from amd_iommu_erratum_746_workaround
There is a bug introduced with commit 27c2127 that causes
devices which are hot unplugged and then hot-replugged to
not have per-device dma_ops set. This causes these devices
to not function correctly. Fixed with this patch.
Cc: stable@vger.kernel.org
Reported-by: Andreas Degert <andreas.degert@googlemail.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Change to remove local PCI_BUS() define and use the new PCI_BUS_NUM()
interface from PCI.
Signed-off-by: Shuah Khan <shuah.khan@hp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joerg Roedel <joro@8bytes.org>
When there is a dmar irq, dmar_fault is called and all of the fields
in FSTS are cleared. But ICE/IQE/ITE should not be cleared here,
they need to be processed and cleared in function qi_check_fault.
[Minor cleanup by Joerg Roedel]
Signed-off-by: Li, Zhen-Hua <zhen-hual@hp.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The OMAP IOMMU driver intentionally fails to build on OMAP1
platforms, so we should not allow enabling it there.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Omar Ramirez Luna <omar.luna@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
commit 318fe78 ("IOMMU, AMD Family15h Model10-1Fh erratum 746 Workaround")
added amd_iommu_erratum_746_workaround and it's marked as __init, which is wrong
WARNING: drivers/iommu/built-in.o(.text+0x639c): Section mismatch in reference from the function iommu_init_pci() to the function .init.text:amd_iommu_erratum_746_workaround()
The function iommu_init_pci() references
the function __init amd_iommu_erratum_746_workaround().
This is often because iommu_init_pci lacks a __init
annotation or the annotation of amd_iommu_erratum_746_workaround is wrong.
Signed-off-by: Nikola Pajkovsky <npajkovs@redhat.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The number of DMA fault reasons in intel's document are from 1
to 0xD, but in dmar.c fault reason 0xD is not printed out.
In this document:
"Intel Virtualization Technology for Directed I/O Architecture Specification"
http://download.intel.com/technology/computing/vptech/Intel(r)_VT_for_Direct_IO.pdf
Chapter 4. Support For Device-IOTLBs
Table 6. Unsuccessful Translated Requests
There is fault reason for 0xD not listed in kernel:
Present context-entry used to process translation request
specifies blocking of Translation Requests (Translation Type (T)
field value not equal to 01b).
This patch adds reason 0xD as well.
Signed-off-by: Li, Zhen-Hua <zhen-hual@hp.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Donald Dutile <ddutile@redhat.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Hannes Reinecke <hare@suse.de>
Link: http://lkml.kernel.org/r/1362537797-6034-1-git-send-email-zhen-hual@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull vfs pile (part one) from Al Viro:
"Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
locking violations, etc.
The most visible changes here are death of FS_REVAL_DOT (replaced with
"has ->d_weak_revalidate()") and a new helper getting from struct file
to inode. Some bits of preparation to xattr method interface changes.
Misc patches by various people sent this cycle *and* ocfs2 fixes from
several cycles ago that should've been upstream right then.
PS: the next vfs pile will be xattr stuff."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
saner proc_get_inode() calling conventions
proc: avoid extra pde_put() in proc_fill_super()
fs: change return values from -EACCES to -EPERM
fs/exec.c: make bprm_mm_init() static
ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
ocfs2: fix possible use-after-free with AIO
ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
target: writev() on single-element vector is pointless
export kernel_write(), convert open-coded instances
fs: encode_fh: return FILEID_INVALID if invalid fid_type
kill f_vfsmnt
vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
nfsd: handle vfs_getattr errors in acl protocol
switch vfs_getattr() to struct path
default SET_PERSONALITY() in linux/elf.h
ceph: prepopulate inodes only when request is aborted
d_hash_and_lookup(): export, switch open-coded instances
9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
9p: split dropping the acls from v9fs_set_create_acl()
...
Besides some fixes and cleanups in the code there are three more
important changes to point out this time:
* New IOMMU driver for the ARM SHMOBILE platform
* An IOMMU-API extension for non-paging IOMMUs (required for
upcoming PAMU driver)
* Rework of the way the Tegra IOMMU driver accesses its
registetrs - register windows are easier to extend now.
There are also a few changes to non-iommu code, but that is acked by the
respective maintainers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=G4Ot
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU Updates from Joerg Roedel:
"Besides some fixes and cleanups in the code there are three more
important changes to point out this time:
* New IOMMU driver for the ARM SHMOBILE platform
* An IOMMU-API extension for non-paging IOMMUs (required for
upcoming PAMU driver)
* Rework of the way the Tegra IOMMU driver accesses its
registetrs - register windows are easier to extend now.
There are also a few changes to non-iommu code, but that is acked by
the respective maintainers."
* tag 'iommu-updates-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (23 commits)
iommu/tegra: assume CONFIG_OF in SMMU driver
iommu/tegra: assume CONFIG_OF in gart driver
iommu/amd: Remove redundant NULL check before dma_ops_domain_free().
iommu/amd: Initialize device table after dma_ops
iommu/vt-d: Zero out allocated memory in dmar_enable_qi
iommu/tegra: smmu: Fix incorrect mask for regbase
iommu/exynos: Make exynos_sysmmu_disable static
ARM: mach-shmobile: r8a7740: Add IPMMU device
ARM: mach-shmobile: sh73a0: Add IPMMU device
ARM: mach-shmobile: sh7372: Add IPMMU device
iommu/shmobile: Add iommu driver for Renesas IPMMU modules
iommu: Add DOMAIN_ATTR_WINDOWS domain attribute
iommu: Add domain window handling functions
iommu: Implement DOMAIN_ATTR_PAGING attribute
iommu: Check for valid pgsize_bitmap in iommu_map/unmap
iommu: Make sure DOMAIN_ATTR_MAX is really the maximum
iommu/tegra: smmu: Change SMMU's dependency on ARCH_TEGRA
iommu/tegra: smmu: Use helper function to check for valid register offset
iommu/tegra: smmu: Support variable MMIO ranges/blocks
iommu/tegra: Add missing spinlock initialization
...
Pull drm merge from Dave Airlie:
"Highlights:
- TI LCD controller KMS driver
- TI OMAP KMS driver merged from staging
- drop gma500 stub driver
- the fbcon locking fixes
- the vgacon dirty like zebra fix.
- open firmware videomode and hdmi common code helpers
- major locking rework for kms object handling - pageflip/cursor
won't block on polling anymore!
- fbcon helper and prime helper cleanups
- i915: all over the map, haswell power well enhancements, valleyview
macro horrors cleaned up, killing lots of legacy GTT code,
- radeon: CS ioctl unification, deprecated UMS support, gpu reset
rework, VM fixes
- nouveau: reworked thermal code, external dp/tmds encoder support
(anx9805), fences sleep instead of polling,
- exynos: all over the driver fixes."
Lovely conflict in radeon/evergreen_cs.c between commit de0babd60d
("drm/radeon: enforce use of radeon_get_ib_value when reading user cmd")
and the new changes that modified that evergreen_dma_cs_parse()
function.
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (508 commits)
drm/tilcdc: only build on arm
drm/i915: Revert hdmi HDP pin checks
drm/tegra: Add list of framebuffers to debugfs
drm/tegra: Fix color expansion
drm/tegra: Split DC_CMD_STATE_CONTROL register write
drm/tegra: Implement page-flipping support
drm/tegra: Implement VBLANK support
drm/tegra: Implement .mode_set_base()
drm/tegra: Add plane support
drm/tegra: Remove bogus tegra_framebuffer structure
drm: Add consistency check for page-flipping
drm/radeon: Use generic HDMI infoframe helpers
drm/tegra: Use generic HDMI infoframe helpers
drm: Add EDID helper documentation
drm: Add HDMI infoframe helpers
video: Add generic HDMI infoframe helpers
drm: Add some missing forward declarations
drm: Move mode tables to drm_edid.c
drm: Remove duplicate drm_mode_cea_vic()
gma500: Fix n, m1 and m2 clock limits for sdvo and lvds
...
Here is the big driver core merge for 3.9-rc1
There are two major series here, both of which touch lots of drivers all
over the kernel, and will cause you some merge conflicts:
- add a new function called devm_ioremap_resource() to properly be
able to check return values.
- remove CONFIG_EXPERIMENTAL
If you need me to provide a merged tree to handle these resolutions,
please let me know.
Other than those patches, there's not much here, some minor fixes and
updates.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlEmV0cACgkQMUfUDdst+yncCQCfbmnQZju7kzWXk6PjdFuKspT9
weAAoMCzcAtEzzc4LXuUxxG/sXBVBCjW
=yWAQ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core patches from Greg Kroah-Hartman:
"Here is the big driver core merge for 3.9-rc1
There are two major series here, both of which touch lots of drivers
all over the kernel, and will cause you some merge conflicts:
- add a new function called devm_ioremap_resource() to properly be
able to check return values.
- remove CONFIG_EXPERIMENTAL
Other than those patches, there's not much here, some minor fixes and
updates"
Fix up trivial conflicts
* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
base: memory: fix soft/hard_offline_page permissions
drivercore: Fix ordering between deferred_probe and exiting initcalls
backlight: fix class_find_device() arguments
TTY: mark tty_get_device call with the proper const values
driver-core: constify data for class_find_device()
firmware: Ignore abort check when no user-helper is used
firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
firmware: Make user-mode helper optional
firmware: Refactoring for splitting user-mode helper code
Driver core: treat unregistered bus_types as having no devices
watchdog: Convert to devm_ioremap_resource()
thermal: Convert to devm_ioremap_resource()
spi: Convert to devm_ioremap_resource()
power: Convert to devm_ioremap_resource()
mtd: Convert to devm_ioremap_resource()
mmc: Convert to devm_ioremap_resource()
mfd: Convert to devm_ioremap_resource()
media: Convert to devm_ioremap_resource()
iommu: Convert to devm_ioremap_resource()
drm: Convert to devm_ioremap_resource()
...
Pull x86/apic changes from Ingo Molnar:
"Main changes:
- Multiple MSI support added to the APIC, PCI and AHCI code - acked
by all relevant maintainers, by Alexander Gordeev.
The advantage is that multiple AHCI ports can have multiple MSI
irqs assigned, and can thus spread to multiple CPUs.
[ Drivers can make use of this new facility via the
pci_enable_msi_block_auto() method ]
- x86 IOAPIC code from interrupt remapping cleanups from Joerg
Roedel:
These patches move all interrupt remapping specific checks out of
the x86 core code and replaces the respective call-sites with
function pointers. As a result the interrupt remapping code is
better abstraced from x86 core interrupt handling code.
- Various smaller improvements, fixes and cleanups."
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
x86/intel/irq_remapping: Clean up x2apic opt-out security warning mess
x86, kvm: Fix intialization warnings in kvm.c
x86, irq: Move irq_remapped out of x86 core code
x86, io_apic: Introduce eoi_ioapic_pin call-back
x86, msi: Introduce x86_msi.compose_msi_msg call-back
x86, irq: Introduce setup_remapped_irq()
x86, irq: Move irq_remapped() check into free_remapped_irq
x86, io-apic: Remove !irq_remapped() check from __target_IO_APIC_irq()
x86, io-apic: Move CONFIG_IRQ_REMAP code out of x86 core
x86, irq: Add data structure to keep AMD specific irq remapping information
x86, irq: Move irq_remapping_enabled declaration to iommu code
x86, io_apic: Remove irq_remapping_enabled check in setup_timer_IRQ0_pin
x86, io_apic: Move irq_remapping_enabled checks out of check_timer()
x86, io_apic: Convert setup_ioapic_entry to function pointer
x86, io_apic: Introduce set_affinity function pointer
x86, msi: Use IRQ remapping specific setup_msi_irqs routine
x86, hpet: Introduce x86_msi_ops.setup_hpet_msi
x86, io_apic: Introduce x86_io_apic_ops.print_entries for debugging
x86, io_apic: Introduce x86_io_apic_ops.disable()
x86, apic: Mask IO-APIC and PIC unconditionally on LAPIC resume
...
We already have the quirk entry for the mobile platform, but also
reports on some desktop versions. So be paranoid and set it
everywhere.
References: http://www.mail-archive.com/dri-devel@lists.freedesktop.org/msg33138.html
Cc: stable@vger.kernel.org
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "Sankaran, Rajesh" <rajesh.sankaran@intel.com>
Reported-and-tested-by: Mihai Moldovan <ionic@ionic.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tegra only supports, and always enables, device tree. Remove all ifdefs
for DT support from the driver.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Tegra only supports, and always enables, device tree. Remove all ifdefs
for DT support from the driver.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
dma_ops_domain_free on a NULL pointer is a no-op, so the NULL check in
amd_iommu_init_dma_ops() can be removed.
Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
When dma_ops are initialized the unity mappings are
created. The init_device_table_dma() function makes sure DMA
from all devices is blocked by default. This opens a short
window in time where DMA to unity mapped regions is blocked
by the IOMMU. Make sure this does not happen by initializing
the device table after dma_ops.
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <joro@8bytes.org>
kmemcheck complained about the use of uninitialized memory.
Fix by using kzalloc instead of kmalloc.
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
This fixes kernel crash because of BUG() in register address
validation.
Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
'exynos_sysmmu_disable' is used only in this file and can be made static.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
This is the Renesas IPMMU driver and IOMMU API implementation.
The IPMMU module supports the MMU function and the PMB function. The
MMU function provides address translation by pagetable compatible with
ARMv6. The PMB function provides address translation including
tile-linear translation. This patch implements the MMU function.
The iommu driver does not register a platform driver directly because:
- the register space of the MMU function and the PMB function
have a common register (used for settings flush), so they should ideally
have a way to appropriately share this register.
- the MMU function uses the IOMMU API while the PMB function does not.
- the two functions may be used independently.
Signed-off-by: Hideki EIRAKU <hdk@igel.co.jp>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Add the iommu_domain_window_enable() and iommu_domain_window_disable()
functions to the IOMMU-API. These functions will be used to setup
domains that are based on subwindows and not on paging.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
This attribute of a domain can be queried to find out if the
domain supports setting up page-tables using the iommu_map()
and iommu_unmap() functions.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
In case the page-size bitmap is zero the code path in
iommu_map and iommu_unmap is undefined. Make it defined and
return -ENODEV in this case.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Theoretically TEGRA_IOMMU_SMMU depends on ARCH_TEGRA_3x_SOC and
ARCH_TEGRA_114_SOC only. This patch allows a Tegra20 only kernel to
enable SMMU(Tegra20 doesn't have a SMMU), which could avoid editing
this Kconfig entry every time we add a new chip later.
Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Do not repeat the checking loop in the read and write
functions. Use a single helper function for that check and
call it in both accessors.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Presently SMMU registers are located in discontiguous 3 blocks. They
are interleaved by MC registers. Ideally SMMU register blocks should
be in an independent one block, but it is too late to change this H/W
design. In the future Tegra chips over some generations, it is
expected that some of register block "size" can be extended towards
the end and also more new register blocks will be added at most a few
blocks. The starting address of each existing block won't change. This
patch allocates multiple number of register blocks dynamically based
on the info passed from DT. Those ranges are verified in the
accessors{read,write}. This may sacrifice some performance because a
new accessors prevents compiler optimization of a fixed size register
offset calculation. Since SMMU register accesses are not so frequent,
this would be acceptable. This patch is necessary to unify
"tegra-smmu.ko" over some Tegra SoC generations.
Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Current kernels print this on my Dell server:
------------[ cut here ]------------
WARNING: at drivers/iommu/intel_irq_remapping.c:542
intel_enable_irq_remapping+0x7b/0x27e()
Hardware name: PowerEdge R620
Your BIOS is broken and requested that x2apic be disabled
This will leave your machine vulnerable to irq-injection attacks
Use 'intremap=no_x2apic_optout' to override BIOS request
[...]
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
This is inconsistent with itself -- interrupt remapping is *on*.
Fix the mess by making the warnings say what they mean and my
making sure that compatibility format interrupts (the dangerous
ones) are disabled if x2apic is present regardless of BIOS
settings.
With this patch applied, the output is:
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
This should make us as or more secure than we are now and
replace a rather scary warning with a much less scary warning on
silly but functional systems.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Link: http://lkml.kernel.org/r/2011b943a886fd7c46079eb10bc24fc130587503.1359759303.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull drm fixes from Dave Airlie:
"Intel, radeon and exynos fixes. Nothing too major or wierd: one dmar
fix and a radeon cursor corruption, along with misc exynos fixes."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (21 commits)
drm/exynos: add check for the device power status
drm/exynos: Make 'drm_hdmi_get_edid' static
drm/exynos: fimd and ipp are broken on multiplatform
drm/exynos: don't include plat/gpio-cfg.h
drm/exynos: Remove "internal" interrupt handling
drm/exynos: Add missing static specifiers in exynos_drm_rotator.c
drm/exynos: Replace mdelay with usleep_range
drm/exynos: Make ipp_handle_cmd_work static
drm/exynos: Make g2d_userptr_get_dma_addr static
drm/exynos: consider DMA_NONE flag to dmabuf import
drm/exynos: free sg object if dma_map_sg is failed
drm/exynos: added validation of edid for vidi connection
drm/exynos: let drm handle edid allocations
drm/radeon: Enable DMA_IB_SWAP_ENABLE on big endian hosts.
drm/radeon: fix a rare case of double kfree
radeon_display: Use pointer return error codes
drm/radeon: fix cursor corruption on DCE6 and newer
drm/i915: dump UTS_RELEASE into the error_state
iommu/intel: disable DMAR for g4x integrated gfx
drm/i915: GFX_MODE Flush TLB Invalidate Mode must be '1' for scanline waits
...
The IOMMU may stop processing page translations due to a perceived lack
of credits for writing upstream peripheral page service request (PPR)
or event logs. If the L2B miscellaneous clock gating feature is enabled
the IOMMU does not properly register credits after the log request has
completed, leading to a potential system hang.
BIOSes are supposed to disable L2B micellaneous clock gating by setting
L2_L2B_CK_GATE_CONTROL[CKGateL2BMiscDisable](D0F2xF4_x90[2]) = 1b. This
patch corrects that for those which do not enable this workaround.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The pointer obj is dereferenced in line 146 and 149 respectively, so it is not
necessary to check null again in line 149 and 175. And I have checked that all
the callers of these two functions guarantee the parameter obj passed is not
null.
Signed-off-by: Cong Ding <dinggnu@gmail.com>
Acked-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The irq_remapped function is only used in IOMMU code after
the last patch. So move its definition there too.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This callback replaces the old __eoi_ioapic_pin function
which needs a special path for interrupt remapping.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This call-back points to the right function for initializing
the msi_msg structure. The old code for msi_msg generation
was split up into the irq-remapped and the default case.
The irq-remapped case just calls into the specific Intel or
AMD implementation when the device is behind an IOMMU.
Otherwise the default function is called.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This function does irq-remapping specific interrupt setup
like modifying the chip defaults.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The function is called unconditionally now in IO-APIC code
removing another irq_remapped() check from x86 core code.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Move all the code to either to the header file
asm/irq_remapping.h or to drivers/iommu/.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Remove the last left-over from this flag from x86 code.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Move these checks to IRQ remapping code by introducing the
panic_on_irq_remap() function.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This pointer is changed to a different function when IRQ
remapping is enabled.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
With interrupt remapping a special function is used to
change the affinity of an IO-APIC interrupt. Abstract this
with a function pointer.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Use seperate routines to setup MSI IRQs for both
irq_remapping_enabled cases.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This function pointer can be overwritten by the IRQ
remapping code. The irq_remapping_enabled check can be
removed from default_setup_hpet_msi.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This call-back is used to dump IO-APIC entries for debugging
purposes into the kernel log. VT-d needs a special routine
for this and will overwrite the default.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This function pointer is used to call a system-specific
function for disabling the IO-APIC. Currently this is used
for IRQ remapping which has its own disable routine.
Also introduce the necessary infrastructure in the interrupt
remapping code to overwrite this and other function pointers
as necessary by interrupt remapping.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Move the three easy to move checks in the x86' apic.c file
into the IRQ-remapping code.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Convert all uses of devm_request_and_ioremap() to the newly introduced
devm_ioremap_resource() which provides more consistent error handling.
devm_ioremap_resource() provides its own error messages so all explicit
error messages can be removed from the failure code paths.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DMAR support on g4x/gm45 integrated gpus seems to be totally busted.
So don't bother, but instead disable it by default to allow distros to
unconditionally enable DMAR support.
v2: Actually wire up the right quirk entry, spotted by Adam Jackson.
Note that according to intel marketing materials only g45 and gm45
support DMAR/VT-d. So we have reports for all relevant gen4 pci ids by
now. Still, keep all the other gen4 ids in the quirk table in case the
marketing stuff confused me again, which would not be the first time.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51921
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=538163
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=538163
Cc: Adam Jackson <ajax@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: stable@vger.kernel.org
Acked-By: David Woodhouse <David.Woodhouse@intel.com>
Tested-by: stathis <stathis@npcglib.org>
Tested-by: Mihai Moldovan <ionic@ionic.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: Joerg Roedel <joerg.roedel@amd.com>
CC: Hiroshi DOYU <hdoyu@nvidia.com>
CC: Jiri Kosina <jkosina@suse.cz>
CC: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
