Commit Graph

55398 Commits

Author SHA1 Message Date
Linus Torvalds
1a9df9e29c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "Fixes here and there, a couple new device IDs, as usual:

   1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei.

   2) Fix 64-bit division in iwlwifi, from Arnd Bergmann.

   3) Fix documentation for some eBPF helpers, from Quentin Monnet.

   4) Some UAPI bpf header sync with tools, also from Quentin Monnet.

   5) Set descriptor ownership bit at the right time for jumbo frames in
      stmmac driver, from Aaro Koskinen.

   6) Set IFF_UP properly in tun driver, from Eric Dumazet.

   7) Fix load/store doubleword instruction generation in powerpc eBPF
      JIT, from Naveen N. Rao.

   8) nla_nest_start() return value checks all over, from Kangjie Lu.

   9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this
      merge window. From Marcelo Ricardo Leitner and Xin Long.

  10) Fix memory corruption with large MTUs in stmmac, from Aaro
      Koskinen.

  11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric
      Dumazet.

  12) Fix topology subscription cancellation in tipc, from Erik Hugne.

  13) Memory leak in genetlink error path, from Yue Haibing.

  14) Valid control actions properly in packet scheduler, from Davide
      Caratti.

  15) Even if we get EEXIST, we still need to rehash if a shrink was
      delayed. From Herbert Xu.

  16) Fix interrupt mask handling in interrupt handler of r8169, from
      Heiner Kallweit.

  17) Fix leak in ehea driver, from Wen Yang"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits)
  dpaa2-eth: fix race condition with bql frame accounting
  chelsio: use BUG() instead of BUG_ON(1)
  net: devlink: skip info_get op call if it is not defined in dumpit
  net: phy: bcm54xx: Encode link speed and activity into LEDs
  tipc: change to check tipc_own_id to return in tipc_net_stop
  net: usb: aqc111: Extend HWID table by QNAP device
  net: sched: Kconfig: update reference link for PIE
  net: dsa: qca8k: extend slave-bus implementations
  net: dsa: qca8k: remove leftover phy accessors
  dt-bindings: net: dsa: qca8k: support internal mdio-bus
  dt-bindings: net: dsa: qca8k: fix example
  net: phy: don't clear BMCR in genphy_soft_reset
  bpf, libbpf: clarify bump in libbpf version info
  bpf, libbpf: fix version info and add it to shared object
  rxrpc: avoid clang -Wuninitialized warning
  tipc: tipc clang warning
  net: sched: fix cleanup NULL pointer exception in act_mirr
  r8169: fix cable re-plugging issue
  net: ethernet: ti: fix possible object reference leak
  net: ibm: fix possible object reference leak
  ...
2019-03-27 12:22:57 -07:00
Linus Torvalds
14c741de93 NFS client bugfixes for Linux 5.1
Highlights include:
 
 Stable fixes:
 - Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
 - fix mount/umount race in nlmclnt.
 - NFSv4.1 don't free interrupted slot on open
 
 Bugfixes:
 - Don't let RPC_SOFTCONN tasks time out if the transport is connected
 - Fix a typo in nfs_init_timeout_values()
 - Fix layoutstats handling during read failovers
 - fix uninitialized variable warning
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcmobMAAoJEA4mA3inWBJc/7cP+wR19SPLnbPAFnA09LyT2wDu
 wZI/y4KYcqGX4kW+ZfhvtR91Zy+UzF685NlbY+kH74JH9Wp9o9DJHW6DC//oxAM5
 bzMKH4FIY5IEYN6R554QzHHvIzDzJADgdmjwaSjZyYiNQMJ5xnYClkAWBqU4zG4c
 luTLcYg2cHYic/2bYCVI/SvSSH4Rq93MhttxWgmP0yUm2l3ed+r+ZydQiAyxBFRv
 0DN8dM7gltHnbOapKVxttmdNpK7EIDlTdUFupiwZMvsm5OCGcLm09DUUE0oE0d+s
 bZflhWNtV/0P7zjx0SZTfd3/XKo5PRIzAB2sx4KsqzbnC5kR9fl3royZ0CUgPJYa
 n7Bb9PJd8AJV+0FK5cyH3KQwL5UokpU7g1pD7MNxUuIM8iDbpZcOfsiKN/ZWVInJ
 E/eot9/D4kaDvTWQ+EmCzb7bI6yjVo6B27KFVC+ZNunfP1hFz+CrybUHpbraMw+7
 okvE9x+qCeeHRKTNGhcFTAEjGFPQX6nomS6MyFUXUriKSy29Fiq9kUem1qFFsPxk
 c79pYQdu/TUX3sUxjVsOaOr1sS+VJZOrUzGe2/IAZKM86Mu0fQ8W4PTKhqv/ZG+4
 oxC4ukHI39cDYcjyUMnpOGgZ3k1w7UcttVKy0fcsfHQJCTfa5kfd+s9mPpCBV3JG
 GN9QQkWPLud8uoR/85rR
 =d5ft
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

  Stable fixes:
   - Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
   - fix mount/umount race in nlmclnt.
   - NFSv4.1 don't free interrupted slot on open

  Bugfixes:
   - Don't let RPC_SOFTCONN tasks time out if the transport is connected
   - Fix a typo in nfs_init_timeout_values()
   - Fix layoutstats handling during read failovers
   - fix uninitialized variable warning"

* tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: fix uninitialized variable warning
  pNFS/flexfiles: Fix layoutstats handling during read failovers
  NFS: Fix a typo in nfs_init_timeout_values()
  SUNRPC: Don't let RPC_SOFTCONN tasks time out if the transport is connected
  NFSv4.1 don't free interrupted slot on open
  NFS: fix mount/umount race in nlmclnt.
  NFS: Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
2019-03-26 14:25:48 -07:00
Alakesh Haloi
01f2f5b82a SUNRPC: fix uninitialized variable warning
Avoid following compiler warning on uninitialized variable

net/sunrpc/xprtsock.c: In function ‘xs_read_stream_request.constprop’:
net/sunrpc/xprtsock.c:525:10: warning: ‘read’ may be used uninitialized in this function [-Wmaybe-uninitialized]
   return read;
          ^~~~
net/sunrpc/xprtsock.c:529:23: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  return ret < 0 ? ret : read;
         ~~~~~~~~~~~~~~^~~~~~

Signed-off-by: Alakesh Haloi <alakesh.haloi@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-26 13:04:32 -07:00
Jiri Pirko
c493b09b27 net: devlink: skip info_get op call if it is not defined in dumpit
In dumpit, unlike doit, the check for info_get op being defined
is missing. Add it and avoid null pointer dereference in case driver
does not define this op.

Fixes: f9cf22882c ("devlink: add device information API")
Reported-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26 11:25:29 -07:00
Xin Long
9926cb5f8b tipc: change to check tipc_own_id to return in tipc_net_stop
When running a syz script, a panic occurred:

[  156.088228] BUG: KASAN: use-after-free in tipc_disc_timeout+0x9c9/0xb20 [tipc]
[  156.094315] Call Trace:
[  156.094844]  <IRQ>
[  156.095306]  dump_stack+0x7c/0xc0
[  156.097346]  print_address_description+0x65/0x22e
[  156.100445]  kasan_report.cold.3+0x37/0x7a
[  156.102402]  tipc_disc_timeout+0x9c9/0xb20 [tipc]
[  156.106517]  call_timer_fn+0x19a/0x610
[  156.112749]  run_timer_softirq+0xb51/0x1090

It was caused by the netns freed without deleting the discoverer timer,
while later on the netns would be accessed in the timer handler.

The timer should have been deleted by tipc_net_stop() when cleaning up a
netns. However, tipc has been able to enable a bearer and start d->timer
without the local node_addr set since Commit 52dfae5c85 ("tipc: obtain
node identity from interface by default"), which caused the timer not to
be deleted in tipc_net_stop() then.

So fix it in tipc_net_stop() by changing to check local node_id instead
of local node_addr, as Jon suggested.

While at it, remove the calling of tipc_nametbl_withdraw() there, since
tipc_nametbl_stop() will take of the nametbl's freeing after.

Fixes: 52dfae5c85 ("tipc: obtain node identity from interface by default")
Reported-by: syzbot+a25307ad099309f1c2b9@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26 11:21:20 -07:00
Leslie Monis
1f8389bf63 net: sched: Kconfig: update reference link for PIE
RFC 8033 replaces the IETF draft for PIE

Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26 11:17:09 -07:00
Arnd Bergmann
526949e877 rxrpc: avoid clang -Wuninitialized warning
clang produces a false-positive warning as it fails to notice
that "lost = true" implies that "ret" is initialized:

net/rxrpc/output.c:402:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
        if (lost)
            ^~~~
net/rxrpc/output.c:437:6: note: uninitialized use occurs here
        if (ret >= 0) {
            ^~~
net/rxrpc/output.c:402:2: note: remove the 'if' if its condition is always false
        if (lost)
        ^~~~~~~~~
net/rxrpc/output.c:339:9: note: initialize the variable 'ret' to silence this warning
        int ret, opt;
               ^
                = 0

Rearrange the code to make that more obvious and avoid the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23 21:48:30 -04:00
Jon Maloy
737889efe9 tipc: tipc clang warning
When checking the code with clang -Wsometimes-uninitialized we get the
following warning:

if (!tipc_link_is_establishing(l)) {
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/tipc/node.c:847:46: note: uninitialized use occurs here
      tipc_bearer_xmit(n->net, bearer_id, &xmitq, maddr);

net/tipc/node.c:831:2: note: remove the 'if' if its condition is always
true
if (!tipc_link_is_establishing(l)) {
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/tipc/node.c:821:31: note: initialize the variable 'maddr' to silence
this warning
struct tipc_media_addr *maddr;

We fix this by initializing 'maddr' to NULL. For the matter of clarity,
we also test if 'xmitq' is non-empty before we use it and 'maddr'
further down in the  function. It will never happen that 'xmitq' is non-
empty at the same time as 'maddr' is NULL, so this is a sufficient test.

Fixes: 598411d70f ("tipc: make resetting of links non-atomic")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23 21:45:59 -04:00
John Hurley
064c5d6881 net: sched: fix cleanup NULL pointer exception in act_mirr
A new mirred action is created by the tcf_mirred_init function. This
contains a list head struct which is inserted into a global list on
successful creation of a new action. However, after a creation, it is
still possible to error out and call the tcf_idr_release function. This,
in turn, calls the act_mirr cleanup function via __tcf_idr_release and
__tcf_action_put. This cleanup function tries to delete the list entry
which is as yet uninitialised, leading to a NULL pointer exception.

Fix this by initialising the list entry on creation of a new action.

Bug report:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
PGD 8000000840c73067 P4D 8000000840c73067 PUD 858dcc067 PMD 0
Oops: 0002 [#1] SMP PTI
CPU: 32 PID: 5636 Comm: handler194 Tainted: G           OE     5.0.0+ #186
Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.3.6 06/03/2015
RIP: 0010:tcf_mirred_release+0x42/0xa7 [act_mirred]
Code: f0 90 39 c0 e8 52 04 57 c8 48 c7 c7 b8 80 39 c0 e8 94 fa d4 c7 48 8b 93 d0 00 00 00 48 8b 83 d8 00 00 00 48 c7 c7 f0 90 39 c0 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 83 d0 00
RSP: 0018:ffffac4aa059f688 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff9dcd1b214d00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9dcd1fa165f8 RDI: ffffffffc03990f0
RBP: ffff9dccf9c7af80 R08: 0000000000000a3b R09: 0000000000000000
R10: ffff9dccfa11f420 R11: 0000000000000000 R12: 0000000000000001
R13: ffff9dcd16b433c0 R14: ffff9dcd1b214d80 R15: 0000000000000000
FS:  00007f441bfff700(0000) GS:ffff9dcd1fa00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 0000000839e64004 CR4: 00000000001606e0
Call Trace:
tcf_action_cleanup+0x59/0xca
__tcf_action_put+0x54/0x6b
__tcf_idr_release.cold.33+0x9/0x12
tcf_mirred_init.cold.20+0x22e/0x3b0 [act_mirred]
tcf_action_init_1+0x3d0/0x4c0
tcf_action_init+0x9c/0x130
tcf_exts_validate+0xab/0xc0
fl_change+0x1ca/0x982 [cls_flower]
tc_new_tfilter+0x647/0x8d0
? load_balance+0x14b/0x9e0
rtnetlink_rcv_msg+0xe3/0x370
? __switch_to_asm+0x40/0x70
? __switch_to_asm+0x34/0x70
? _cond_resched+0x15/0x30
? __kmalloc_node_track_caller+0x1d4/0x2b0
? rtnl_calcit.isra.31+0xf0/0xf0
netlink_rcv_skb+0x49/0x110
netlink_unicast+0x16f/0x210
netlink_sendmsg+0x1df/0x390
sock_sendmsg+0x36/0x40
___sys_sendmsg+0x27b/0x2c0
? futex_wake+0x80/0x140
? do_futex+0x2b9/0xac0
? ep_scan_ready_list.constprop.22+0x1f2/0x210
? ep_poll+0x7a/0x430
__sys_sendmsg+0x47/0x80
do_syscall_64+0x55/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 4e232818bd ("net: sched: act_mirred: remove dependency on rtnl lock")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23 21:36:04 -04:00
Trond Myklebust
d84dd3fb82 SUNRPC: Don't let RPC_SOFTCONN tasks time out if the transport is connected
If the transport is still connected, then we do want to allow
RPC_SOFTCONN tasks to retry. They should time out if and only if
the connection is broken.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-23 11:51:22 -04:00
Wang Hai
6b70fc94af net-sysfs: Fix memory leak in netdev_register_kobject
When registering struct net_device, it will call
	register_netdevice ->
		netdev_register_kobject ->
			device_initialize(dev);
			dev_set_name(dev, "%s", ndev->name)
			device_add(dev)
			register_queue_kobjects(ndev)

In netdev_register_kobject(), if device_add(dev) or
register_queue_kobjects(ndev) failed. Register_netdevice()
will return error, causing netdev_freemem(ndev) to be
called to free net_device, however put_device(&dev->dev)->..->
kobject_cleanup() won't be called, resulting in a memory leak.

syzkaller report this:
BUG: memory leak
unreferenced object 0xffff8881f4fad168 (size 8):
comm "syz-executor.0", pid 3575, jiffies 4294778002 (age 20.134s)
hex dump (first 8 bytes):
  77 70 61 6e 30 00 ff ff                          wpan0...
backtrace:
  [<000000006d2d91d7>] kstrdup_const+0x3d/0x50 mm/util.c:73
  [<00000000ba9ff953>] kvasprintf_const+0x112/0x170 lib/kasprintf.c:48
  [<000000005555ec09>] kobject_set_name_vargs+0x55/0x130 lib/kobject.c:281
  [<0000000098d28ec3>] dev_set_name+0xbb/0xf0 drivers/base/core.c:1915
  [<00000000b7553017>] netdev_register_kobject+0xc0/0x410 net/core/net-sysfs.c:1727
  [<00000000c826a797>] register_netdevice+0xa51/0xeb0 net/core/dev.c:8711
  [<00000000857bfcfd>] cfg802154_update_iface_num.isra.2+0x13/0x90 [ieee802154]
  [<000000003126e453>] ieee802154_llsec_fill_key_id+0x1d5/0x570 [ieee802154]
  [<00000000e4b3df51>] 0xffffffffc1500e0e
  [<00000000b4319776>] platform_drv_probe+0xc6/0x180 drivers/base/platform.c:614
  [<0000000037669347>] really_probe+0x491/0x7c0 drivers/base/dd.c:509
  [<000000008fed8862>] driver_probe_device+0xdc/0x240 drivers/base/dd.c:671
  [<00000000baf52041>] device_driver_attach+0xf2/0x130 drivers/base/dd.c:945
  [<00000000c7cc8dec>] __driver_attach+0x10e/0x210 drivers/base/dd.c:1022
  [<0000000057a757c2>] bus_for_each_dev+0x154/0x1e0 drivers/base/bus.c:304
  [<000000005f5ae04b>] bus_add_driver+0x427/0x5e0 drivers/base/bus.c:645

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 1fa5ae857b ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Wang Hai <wanghai26@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:38:27 -07:00
Davide Caratti
ee3bbfe806 net/sched: let actions use RCU to access 'goto_chain'
use RCU when accessing the action chain, to avoid use after free in the
traffic path when 'goto chain' is replaced on existing TC actions (see
script below). Since the control action is read in the traffic path
without holding the action spinlock, we need to explicitly ensure that
a->goto_chain is not NULL before dereferencing (i.e it's not sufficient
to rely on the value of TC_ACT_GOTO_CHAIN bits). Not doing so caused NULL
dereferences in tcf_action_goto_chain_exec() when the following script:

 # tc chain add dev dd0 chain 42 ingress protocol ip flower \
 > ip_proto udp action pass index 4
 # tc filter add dev dd0 ingress protocol ip flower \
 > ip_proto udp action csum udp goto chain 42 index 66
 # tc chain del dev dd0 chain 42 ingress
 (start UDP traffic towards dd0)
 # tc action replace action csum udp pass index 66

was run repeatedly for several hours.

Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Suggested-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:42 -07:00
Davide Caratti
7e0c8892df net/sched: act_vlan: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action vlan pop pass index 90
 # tc actions replace action vlan \
 > pop goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action vlan

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: vlan  pop goto chain 42
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 800000007974f067 P4D 800000007974f067 PUD 79638067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffff982dfdb83be0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff982dfc55db00 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffff982df97099c0 RDI: ffff982dfc55db00
 RBP: ffff982dfdb83c80 R08: ffff982df983fec8 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff982df5aacd00
 R13: ffff982df5aacd08 R14: 0000000000000001 R15: ffff982df97099c0
 FS:  0000000000000000(0000) GS:ffff982dfdb80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 00000000796d0005 CR4: 00000000001606e0
 Call Trace:
  <IRQ>
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ip6_finish_output2+0x369/0x590
  ip6_finish_output2+0x369/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.35+0x79/0xc0
  mld_sendpack+0x16f/0x220
  mld_ifc_timer_expire+0x195/0x2c0
  ? igmp6_timer_handler+0x70/0x70
  call_timer_fn+0x2b/0x130
  run_timer_softirq+0x3e8/0x440
  ? enqueue_hrtimer+0x39/0x90
  __do_softirq+0xe3/0x2f5
  irq_exit+0xf0/0x100
  smp_apic_timer_interrupt+0x6c/0x130
  apic_timer_interrupt+0xf/0x20
  </IRQ>
 RIP: 0010:native_safe_halt+0x2/0x10
 Code: 7b ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
 RSP: 0018:ffffa4714038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
 RAX: ffffffff840184f0 RBX: 0000000000000003 RCX: 0000000000000000
 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000001e57d3f387
 RBP: 0000000000000003 R08: 001125d9ca39e1eb R09: 0000000000000000
 R10: 000000000000027d R11: 000000000009f400 R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
  ? __sched_text_end+0x1/0x1
  default_idle+0x1c/0x140
  do_idle+0x1c4/0x280
  cpu_startup_entry+0x19/0x20
  start_secondary+0x1a7/0x200
  secondary_startup_64+0xa4/0xb0
 Modules linked in: act_vlan veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic mbcache crct10dif_pclmul jbd2 snd_hda_intel crc32_pclmul snd_hda_codec ghash_clmulni_intel snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev snd_timer virtio_balloon snd pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt virtio_net fb_sys_fops virtio_blk ttm net_failover virtio_console failover ata_piix drm libata crc32c_intel virtio_pci serio_raw virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_vlan_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:42 -07:00
Davide Caratti
e5fdabacbf net/sched: act_tunnel_key: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.2 dst_port 3128 \
 > nocsum id 1 pass index 90
 # tc actions replace action tunnel_key \
 > set src_ip 10.10.10.1 dst_ip 20.20.2 dst_port 3128 nocsum id 1 \
 > goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action tunnel_key

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: tunnel_key  set
         src_ip 10.10.10.1
         dst_ip 20.20.2.0
         key_id 1
         dst_port 3128
         nocsum goto chain 42
          index 90 ref 2 bind 1
         cookie c1a0c1a0

then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 800000002aba4067 P4D 800000002aba4067 PUD 795f9067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffff9346bdb83be0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff9346bb795c00 RCX: 0000000000000002
 RDX: 0000000000000000 RSI: ffff93466c881700 RDI: 0000000000000246
 RBP: ffff9346bdb83c80 R08: ffff9346b3e1e0c8 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9346b978f000
 R13: ffff9346b978f008 R14: 0000000000000001 R15: ffff93466dceeb40
 FS:  0000000000000000(0000) GS:ffff9346bdb80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 000000007a6c2002 CR4: 00000000001606e0
 Call Trace:
  <IRQ>
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ip6_finish_output2+0x369/0x590
  ip6_finish_output2+0x369/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.35+0x79/0xc0
  mld_sendpack+0x16f/0x220
  mld_ifc_timer_expire+0x195/0x2c0
  ? igmp6_timer_handler+0x70/0x70
  call_timer_fn+0x2b/0x130
  run_timer_softirq+0x3e8/0x440
  ? tick_sched_timer+0x37/0x70
  __do_softirq+0xe3/0x2f5
  irq_exit+0xf0/0x100
  smp_apic_timer_interrupt+0x6c/0x130
  apic_timer_interrupt+0xf/0x20
  </IRQ>
 RIP: 0010:native_safe_halt+0x2/0x10
 Code: 55 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
 RSP: 0018:ffffa48a8038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
 RAX: ffffffffaa8184f0 RBX: 0000000000000003 RCX: 0000000000000000
 RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000003
 RBP: 0000000000000003 R08: 0011251c6fcfac49 R09: ffff9346b995be00
 R10: ffffa48a805e7ce8 R11: 00000000024c38dd R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
  ? __sched_text_end+0x1/0x1
  default_idle+0x1c/0x140
  do_idle+0x1c4/0x280
  cpu_startup_entry+0x19/0x20
  start_secondary+0x1a7/0x200
  secondary_startup_64+0xa4/0xb0
 Modules linked in: act_tunnel_key veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel mbcache snd_hda_intel jbd2 snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev snd_timer snd pcspkr virtio_balloon soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops ttm net_failover virtio_console virtio_blk failover drm serio_raw crc32c_intel ata_piix virtio_pci floppy virtio_ring libata virtio dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_tunnel_key_init() proved to fix
the above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:42 -07:00
Davide Caratti
7c3d825d12 net/sched: act_skbmod: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action skbmod set smac 00:c1:a0:c1:a0:00 pass index 90
 # tc actions replace action skbmod \
 > set smac 00:c1:a0:c1:a0:00 goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action skbmod

had the following output:

 src MAC address <00:c1:a0:c1:a0:00>
 src MAC address <00:c1:a0:c1:a0:00>
 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: skbmod goto chain 42 set smac 00:c1:a0:c1:a0:00
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 800000002d5c7067 P4D 800000002d5c7067 PUD 77e16067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffff8987ffd83be0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff8987aeb68800 RCX: ffff8987fa263640
 RDX: 0000000000000000 RSI: ffff8987f51c8802 RDI: 00000000000000a0
 RBP: ffff8987ffd83c80 R08: ffff8987f939bac8 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8987f5c77d00
 R13: ffff8987f5c77d08 R14: 0000000000000001 R15: ffff8987f0c29f00
 FS:  0000000000000000(0000) GS:ffff8987ffd80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 000000007832c004 CR4: 00000000001606e0
 Call Trace:
  <IRQ>
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ip6_finish_output2+0x369/0x590
  ip6_finish_output2+0x369/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.35+0x79/0xc0
  mld_sendpack+0x16f/0x220
  mld_ifc_timer_expire+0x195/0x2c0
  ? igmp6_timer_handler+0x70/0x70
  call_timer_fn+0x2b/0x130
  run_timer_softirq+0x3e8/0x440
  ? tick_sched_timer+0x37/0x70
  __do_softirq+0xe3/0x2f5
  irq_exit+0xf0/0x100
  smp_apic_timer_interrupt+0x6c/0x130
  apic_timer_interrupt+0xf/0x20
  </IRQ>
 RIP: 0010:native_safe_halt+0x2/0x10
 Code: 56 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
 RSP: 0018:ffffa2a1c038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
 RAX: ffffffffa94184f0 RBX: 0000000000000003 RCX: 0000000000000001
 RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000003
 RBP: 0000000000000003 R08: 001123cfc2ba71ac R09: 0000000000000000
 R10: 0000000000000000 R11: 00000000000f4240 R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
  ? __sched_text_end+0x1/0x1
  default_idle+0x1c/0x140
  do_idle+0x1c4/0x280
  cpu_startup_entry+0x19/0x20
  start_secondary+0x1a7/0x200
  secondary_startup_64+0xa4/0xb0
 Modules linked in: act_skbmod veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mbcache jbd2 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device aesni_intel crypto_simd cryptd glue_helper snd_pcm joydev pcspkr virtio_balloon snd_timer snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops net_failover virtio_console ttm virtio_blk failover drm crc32c_intel serio_raw ata_piix virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_skbmod_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:42 -07:00
Davide Caratti
ec7727bb24 net/sched: act_skbedit: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action skbedit ptype host pass index 90
 # tc actions replace action skbedit \
 > ptype host goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action skbedit

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: skbedit  ptype host goto chain 42
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP PTI
 CPU: 3 PID: 3467 Comm: kworker/3:3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 Workqueue: ipv6_addrconf addrconf_dad_work
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffffb50a81e1fad0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff9aa47ba4ea00 RCX: 0000000000000001
 RDX: 0000000000000000 RSI: ffff9aa469eeb3c0 RDI: ffff9aa47ba4ea00
 RBP: ffffb50a81e1fb70 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: ffff9aa47bce0638 R12: ffff9aa4793b0c00
 R13: ffff9aa4793b0c08 R14: 0000000000000001 R15: ffff9aa469eeb3c0
 FS:  0000000000000000(0000) GS:ffff9aa474780000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 000000007360e005 CR4: 00000000001606e0
 Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ndisc_next_option+0x50/0x50
  ? ___neigh_create+0x4d5/0x680
  ? ip6_finish_output2+0x1b5/0x590
  ip6_finish_output2+0x1b5/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.28+0x79/0xc0
  ndisc_send_skb+0x248/0x2e0
  ndisc_send_ns+0xf8/0x200
  ? addrconf_dad_work+0x389/0x4b0
  addrconf_dad_work+0x389/0x4b0
  ? __switch_to_asm+0x34/0x70
  ? process_one_work+0x195/0x380
  ? addrconf_dad_completed+0x370/0x370
  process_one_work+0x195/0x380
  worker_thread+0x30/0x390
  ? process_one_work+0x380/0x380
  kthread+0x113/0x130
  ? kthread_park+0x90/0x90
  ret_from_fork+0x35/0x40
 Modules linked in: act_skbedit veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep mbcache snd_hda_core jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev soundcore pcspkr virtio_balloon i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_net net_failover drm failover virtio_blk virtio_console ata_piix virtio_pci crc32c_intel serio_raw libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_skbedit_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
4b006b0c13 net/sched: act_simple: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action simple sdata hello pass index 90
 # tc actions replace action simple \
 > sdata world goto chain 42 index 90 cookie c1a0c1a0
 # tc action show action simple

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: Simple <world>
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 800000006a6fb067 P4D 800000006a6fb067 PUD 6aed6067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 2 PID: 3241 Comm: kworker/2:0 Not tainted 5.0.0-rc4.gotochain_crash+ #536
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 Workqueue: ipv6_addrconf addrconf_dad_work
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffffbe6781763ad0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff9e59bdb80e00 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffff9e59b4716738 RDI: ffff9e59ab12d140
 RBP: ffffbe6781763b70 R08: 0000000000000234 R09: 0000000000aaaaaa
 R10: 0000000000000000 R11: ffff9e59b247cd50 R12: ffff9e59b112f100
 R13: ffff9e59b112f108 R14: 0000000000000001 R15: ffff9e59ab12d0c0
 FS:  0000000000000000(0000) GS:ffff9e59b4700000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 000000006af92004 CR4: 00000000001606e0
 Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ndisc_next_option+0x50/0x50
  ? ___neigh_create+0x4d5/0x680
  ? ip6_finish_output2+0x1b5/0x590
  ip6_finish_output2+0x1b5/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.28+0x79/0xc0
  ndisc_send_skb+0x248/0x2e0
  ndisc_send_ns+0xf8/0x200
  ? addrconf_dad_work+0x389/0x4b0
  addrconf_dad_work+0x389/0x4b0
  ? __switch_to_asm+0x34/0x70
  ? process_one_work+0x195/0x380
  ? addrconf_dad_completed+0x370/0x370
  process_one_work+0x195/0x380
  worker_thread+0x30/0x390
  ? process_one_work+0x380/0x380
  kthread+0x113/0x130
  ? kthread_park+0x90/0x90
  ret_from_fork+0x35/0x40
 Modules linked in: act_simple veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep mbcache snd_hda_core jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops virtio_net ttm net_failover virtio_console virtio_blk failover drm crc32c_intel serio_raw floppy ata_piix libata virtio_pci virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_simple_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
e8c87c643e net/sched: act_sample: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action sample rate 1024 group 4 pass index 90
 # tc actions replace action sample \
 > rate 1024 group 4 goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action sample

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: sample rate 1/1024 group 4 goto chain 42
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 8000000079966067 P4D 8000000079966067 PUD 7987b067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.0.0-rc4.gotochain_crash+ #536
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 Workqueue: ipv6_addrconf addrconf_dad_work
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffffbee60033fad0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff99d7ae6e3b00 RCX: 00000000e555df9b
 RDX: 0000000000000000 RSI: 00000000b0352718 RDI: ffff99d7fda1fcf0
 RBP: ffffbee60033fb70 R08: 0000000070731ab1 R09: 0000000000000400
 R10: 0000000000000000 R11: ffff99d7ac733838 R12: ffff99d7f3c2be00
 R13: ffff99d7f3c2be08 R14: 0000000000000001 R15: ffff99d7f3c2b600
 FS:  0000000000000000(0000) GS:ffff99d7fda00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 00000000797de006 CR4: 00000000001606f0
 Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ndisc_next_option+0x50/0x50
  ? ___neigh_create+0x4d5/0x680
  ? ip6_finish_output2+0x1b5/0x590
  ip6_finish_output2+0x1b5/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.28+0x79/0xc0
  ndisc_send_skb+0x248/0x2e0
  ndisc_send_ns+0xf8/0x200
  ? addrconf_dad_work+0x389/0x4b0
  addrconf_dad_work+0x389/0x4b0
  ? __switch_to_asm+0x34/0x70
  ? process_one_work+0x195/0x380
  ? addrconf_dad_completed+0x370/0x370
  process_one_work+0x195/0x380
  worker_thread+0x30/0x390
  ? process_one_work+0x380/0x380
  kthread+0x113/0x130
  ? kthread_park+0x90/0x90
  ret_from_fork+0x35/0x40
 Modules linked in: act_sample psample veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mbcache jbd2 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device aesni_intel crypto_simd snd_pcm cryptd glue_helper snd_timer joydev snd pcspkr virtio_balloon i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops net_failover ttm failover virtio_blk virtio_console drm ata_piix serio_raw crc32c_intel libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_sample_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
d6124d6ba6 net/sched: act_police: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action police rate 3mbit burst 250k pass index 90
 # tc actions replace action police \
 > rate 3mbit burst 250k goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action police rate 3mbit burst

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0:  police 0x5a rate 3Mbit burst 250Kb mtu 2Kb  action goto chain 42 overhead 0b
         ref 2 bind 1
         cookie c1a0c1a0

Then, when crash0 starts transmitting more than 3Mbit/s, the following
kernel crash is observed:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 800000007a779067 P4D 800000007a779067 PUD 2ad96067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 3 PID: 5032 Comm: netperf Not tainted 5.0.0-rc4.gotochain_crash+ #533
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffffb0e04064fa60 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff93bb3322cce0 RCX: 0000000000000005
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff93bb3322cce0
 RBP: ffffb0e04064fb00 R08: 0000000000000022 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000001 R12: ffff93bb3beed300
 R13: ffff93bb3beed308 R14: 0000000000000001 R15: ffff93bb3b64d000
 FS:  00007f0bc6be5740(0000) GS:ffff93bb3db80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 00000000746a8001 CR4: 00000000001606e0
 Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ipt_do_table+0x31c/0x420 [ip_tables]
  ? ip_finish_output2+0x16f/0x430
  ip_finish_output2+0x16f/0x430
  ? ip_output+0x69/0xe0
  ip_output+0x69/0xe0
  ? ip_forward_options+0x1a0/0x1a0
  __tcp_transmit_skb+0x563/0xa40
  tcp_write_xmit+0x243/0xfa0
  __tcp_push_pending_frames+0x32/0xf0
  tcp_sendmsg_locked+0x404/0xd30
  tcp_sendmsg+0x27/0x40
  sock_sendmsg+0x36/0x40
  __sys_sendto+0x10e/0x140
  ? __sys_connect+0x87/0xf0
  ? syscall_trace_enter+0x1df/0x2e0
  ? __audit_syscall_exit+0x216/0x260
  __x64_sys_sendto+0x24/0x30
  do_syscall_64+0x5b/0x180
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7f0bc5ffbafd
 Code: 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 8b 05 ae c4 2c 00 85 c0 75 2d 45 31 c9 45 31 c0 4c 63 d1 48 63 ff b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 01 c3 48 8b 15 63 63 2c 00 f7 d8 64 89 02 48
 RSP: 002b:00007fffef94b7f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
 RAX: ffffffffffffffda RBX: 0000000000004000 RCX: 00007f0bc5ffbafd
 RDX: 0000000000004000 RSI: 00000000017e5420 RDI: 0000000000000004
 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000004
 R13: 00000000017e51d0 R14: 0000000000000010 R15: 0000000000000006
 Modules linked in: act_police veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic mbcache crct10dif_pclmul jbd2 crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper snd_timer snd joydev pcspkr virtio_balloon soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_blk virtio_net virtio_console net_failover failover crc32c_intel ata_piix libata serio_raw virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_police_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
6ac86ca352 net/sched: act_pedit: validate the control action inside init()
the following script:

 # tc filter add dev crash0 egress matchall \
 > action pedit ex munge ip ttl set 10 pass index 90
 # tc actions replace action pedit \
 > ex munge ip ttl set 10 goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action pedit

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0:  pedit action goto chain 42 keys 1
          index 90 ref 2 bind 1
          key #0  at ipv4+8: val 0a000000 mask 00ffffff
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP PTI
 CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.0.0-rc4.gotochain_crash+ #533
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffff94a73db03be0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff94a6ee4c0700 RCX: 000000000000000a
 RDX: 0000000000000000 RSI: ffff94a6ed22c800 RDI: 0000000000000000
 RBP: ffff94a73db03c80 R08: ffff94a7386fa4c8 R09: ffff94a73229ea20
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff94a6ed22cb00
 R13: ffff94a6ed22cb08 R14: 0000000000000001 R15: ffff94a6ed22c800
 FS:  0000000000000000(0000) GS:ffff94a73db00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 000000007120e002 CR4: 00000000001606e0
 Call Trace:
  <IRQ>
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ip6_finish_output2+0x369/0x590
  ip6_finish_output2+0x369/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.35+0x79/0xc0
  mld_sendpack+0x16f/0x220
  mld_ifc_timer_expire+0x195/0x2c0
  ? igmp6_timer_handler+0x70/0x70
  call_timer_fn+0x2b/0x130
  run_timer_softirq+0x3e8/0x440
  ? tick_sched_timer+0x37/0x70
  __do_softirq+0xe3/0x2f5
  irq_exit+0xf0/0x100
  smp_apic_timer_interrupt+0x6c/0x130
  apic_timer_interrupt+0xf/0x20
  </IRQ>
 RIP: 0010:native_safe_halt+0x2/0x10
 Code: 4e ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
 RSP: 0018:ffffab1740387eb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
 RAX: ffffffffb18184f0 RBX: 0000000000000002 RCX: 0000000000000001
 RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000002
 RBP: 0000000000000002 R08: 000f168fa695f9a9 R09: 0000000000000020
 R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
  ? __sched_text_end+0x1/0x1
  default_idle+0x1c/0x140
  do_idle+0x1c4/0x280
  cpu_startup_entry+0x19/0x20
  start_secondary+0x1a7/0x200
  secondary_startup_64+0xa4/0xb0
 Modules linked in: act_pedit veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache jbd2 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep aesni_intel snd_hda_core crypto_simd snd_seq cryptd glue_helper snd_seq_device snd_pcm joydev snd_timer pcspkr virtio_balloon snd soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs qxl ata_generic pata_acpi drm_kms_helper virtio_net net_failover syscopyarea sysfillrect sysimgblt failover virtio_blk fb_sys_fops virtio_console ttm drm crc32c_intel serio_raw ata_piix virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_pedit_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
1e45d043a8 net/sched: act_nat: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action nat ingress 1.18.1.1 1.18.2.2 pass index 90
 # tc actions replace action nat \
 > ingress 1.18.1.1 1.18.2.2 goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action nat

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0:  nat ingress 1.18.1.1/32 1.18.2.2 goto chain 42
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 800000002d180067 P4D 800000002d180067 PUD 7cb8b067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 3 PID: 164 Comm: kworker/3:1 Not tainted 5.0.0-rc4.gotochain_crash+ #533
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 Workqueue: ipv6_addrconf addrconf_dad_work
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffffae4500e2fad0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff9fa52e28c800 RCX: 0000000001011201
 RDX: 0000000000000000 RSI: 0000000000000056 RDI: ffff9fa52ca12800
 RBP: ffffae4500e2fb70 R08: 0000000000000022 R09: 000000000000000e
 R10: 00000000ffffffff R11: 0000000001011201 R12: ffff9fa52cbc9c00
 R13: ffff9fa52cbc9c08 R14: 0000000000000001 R15: ffff9fa52ca12780
 FS:  0000000000000000(0000) GS:ffff9fa57db80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 0000000073f8c004 CR4: 00000000001606e0
 Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ndisc_next_option+0x50/0x50
  ? ___neigh_create+0x4d5/0x680
  ? ip6_finish_output2+0x1b5/0x590
  ip6_finish_output2+0x1b5/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.28+0x79/0xc0
  ndisc_send_skb+0x248/0x2e0
  ndisc_send_ns+0xf8/0x200
  ? addrconf_dad_work+0x389/0x4b0
  addrconf_dad_work+0x389/0x4b0
  ? __switch_to_asm+0x34/0x70
  ? process_one_work+0x195/0x380
  ? addrconf_dad_completed+0x370/0x370
  process_one_work+0x195/0x380
  worker_thread+0x30/0x390
  ? process_one_work+0x380/0x380
  kthread+0x113/0x130
  ? kthread_park+0x90/0x90
  ret_from_fork+0x35/0x40
 Modules linked in: act_nat veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mbcache jbd2 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper snd_timer snd joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs qxl ata_generic pata_acpi drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_net virtio_blk net_failover failover virtio_console drm crc32c_intel floppy ata_piix libata virtio_pci virtio_ring virtio serio_raw dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_nat_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
c53075ea5d net/sched: act_connmark: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action connmark pass index 90
 # tc actions replace action connmark \
 > goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action connmark

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: connmark zone 0 goto chain 42
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP PTI
 CPU: 0 PID: 302 Comm: kworker/0:2 Not tainted 5.0.0-rc4.gotochain_crash+ #533
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 Workqueue: ipv6_addrconf addrconf_dad_work
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffff9bea406c3ad0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff8c5dfc009f00 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffff9bea406c3a80 RDI: ffff8c5dfb9d6ec0
 RBP: ffff9bea406c3b70 R08: ffff8c5dfda222a0 R09: ffffffff90933c3c
 R10: 0000000000000000 R11: 0000000092793f7d R12: ffff8c5df48b3c00
 R13: ffff8c5df48b3c08 R14: 0000000000000001 R15: ffff8c5dfb9d6e40
 FS:  0000000000000000(0000) GS:ffff8c5dfda00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 0000000062e0e006 CR4: 00000000001606f0
 Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ndisc_next_option+0x50/0x50
  ? ___neigh_create+0x4d5/0x680
  ? ip6_finish_output2+0x1b5/0x590
  ip6_finish_output2+0x1b5/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.28+0x79/0xc0
  ndisc_send_skb+0x248/0x2e0
  ndisc_send_ns+0xf8/0x200
  ? addrconf_dad_work+0x389/0x4b0
  addrconf_dad_work+0x389/0x4b0
  ? __switch_to_asm+0x34/0x70
  ? process_one_work+0x195/0x380
  ? addrconf_dad_completed+0x370/0x370
  process_one_work+0x195/0x380
  worker_thread+0x30/0x390
  ? process_one_work+0x380/0x380
  kthread+0x113/0x130
  ? kthread_park+0x90/0x90
  ret_from_fork+0x35/0x40
 Modules linked in: act_connmark nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul mbcache crc32_pclmul jbd2 snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel snd_timer crypto_simd cryptd snd glue_helper joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper virtio_net net_failover syscopyarea virtio_blk failover virtio_console sysfillrect sysimgblt fb_sys_fops ttm drm ata_piix crc32c_intel serio_raw libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_connmark_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
ff9721d32b net/sched: act_mirred: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action mirred ingress mirror dev lo pass
 # tc actions replace action mirred \
 > ingress mirror dev lo goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action mirred

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: mirred (Ingress Mirror to device lo) goto chain 42
         index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 Mirror/redirect action on
 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP PTI
 CPU: 3 PID: 47 Comm: kworker/3:1 Not tainted 5.0.0-rc4.gotochain_crash+ #533
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 Workqueue: ipv6_addrconf addrconf_dad_work
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffffa772404b7ad0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff9c5afc3f4300 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffff9c5afdba9380 RDI: 0000000000029380
 RBP: ffffa772404b7b70 R08: ffff9c5af7010028 R09: ffff9c5af7010029
 R10: 0000000000000000 R11: ffff9c5af94c6a38 R12: ffff9c5af7953000
 R13: ffff9c5af7953008 R14: 0000000000000001 R15: ffff9c5af7953d00
 FS:  0000000000000000(0000) GS:ffff9c5afdb80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 000000007c514004 CR4: 00000000001606e0
 Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ndisc_next_option+0x50/0x50
  ? ___neigh_create+0x4d5/0x680
  ? ip6_finish_output2+0x1b5/0x590
  ip6_finish_output2+0x1b5/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.28+0x79/0xc0
  ndisc_send_skb+0x248/0x2e0
  ndisc_send_ns+0xf8/0x200
  ? addrconf_dad_work+0x389/0x4b0
  addrconf_dad_work+0x389/0x4b0
  ? __switch_to_asm+0x34/0x70
  ? process_one_work+0x195/0x380
  ? addrconf_dad_completed+0x370/0x370
  process_one_work+0x195/0x380
  worker_thread+0x30/0x390
  ? process_one_work+0x380/0x380
  kthread+0x113/0x130
  ? kthread_park+0x90/0x90
  ret_from_fork+0x35/0x40
 Modules linked in: act_mirred veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul snd_hda_codec_generic crc32_pclmul snd_hda_intel snd_hda_codec mbcache ghash_clmulni_intel jbd2 snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel snd_timer snd crypto_simd cryptd glue_helper soundcore virtio_balloon joydev pcspkr i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops virtio_net ttm virtio_blk net_failover virtio_console failover drm ata_piix crc32c_intel virtio_pci serio_raw libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_mirred_init() proved to fix the
above issue. For the same reason, postpone the assignment of tcfa_action
and tcfm_eaction to avoid partial reconfiguration of a mirred rule when
it's replaced by another one that mirrors to a device that does not
exist. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
11a94d7fd8 net/sched: act_ife: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action ife encode allow mark pass index 90
 # tc actions replace action ife \
 > encode allow mark goto chain 42 index 90 cookie c1a0c1a0
 # tc action show action ife

had the following output:

 IFE type 0xED3E
 IFE type 0xED3E
 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: ife encode action goto chain 42 type 0XED3E
         allow mark
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 800000007b4e7067 P4D 800000007b4e7067 PUD 7b4e6067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 2 PID: 164 Comm: kworker/2:1 Not tainted 5.0.0-rc4.gotochain_crash+ #533
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 Workqueue: ipv6_addrconf addrconf_dad_work
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffffa6a7c0553ad0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff9796ee1bbd00 RCX: 0000000000000001
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
 RBP: ffffa6a7c0553b70 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: ffff9797385bb038 R12: ffff9796ead9d700
 R13: ffff9796ead9d708 R14: 0000000000000001 R15: ffff9796ead9d800
 FS:  0000000000000000(0000) GS:ffff97973db00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 000000007c41e006 CR4: 00000000001606e0
 Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ndisc_next_option+0x50/0x50
  ? ___neigh_create+0x4d5/0x680
  ? ip6_finish_output2+0x1b5/0x590
  ip6_finish_output2+0x1b5/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.28+0x79/0xc0
  ndisc_send_skb+0x248/0x2e0
  ndisc_send_ns+0xf8/0x200
  ? addrconf_dad_work+0x389/0x4b0
  addrconf_dad_work+0x389/0x4b0
  ? __switch_to_asm+0x34/0x70
  ? process_one_work+0x195/0x380
  ? addrconf_dad_completed+0x370/0x370
  process_one_work+0x195/0x380
  worker_thread+0x30/0x390
  ? process_one_work+0x380/0x380
  kthread+0x113/0x130
  ? kthread_park+0x90/0x90
  ret_from_fork+0x35/0x40
 Modules linked in: act_gact act_meta_mark act_ife dummy veth ip6table_filter ip6_tables iptable_filter binfmt_misc snd_hda_codec_generic ext4 snd_hda_intel snd_hda_codec crct10dif_pclmul mbcache crc32_pclmul jbd2 snd_hwdep snd_hda_core ghash_clmulni_intel snd_seq snd_seq_device snd_pcm snd_timer aesni_intel crypto_simd snd cryptd glue_helper virtio_balloon joydev pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl virtio_net drm_kms_helper virtio_blk net_failover syscopyarea failover sysfillrect virtio_console sysimgblt fb_sys_fops ttm drm crc32c_intel serio_raw ata_piix virtio_pci virtio_ring libata virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_ife]
 CR2: 0000000000000000

Validating the control action within tcf_ife_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
0da2dbd602 net/sched: act_gact: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall \
 > action gact pass index 90
 # tc actions replace action gact \
 > goto chain 42 index 90 cookie c1a0c1a0
 # tc actions show action gact

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: gact action goto chain 42
          random type none pass val 0
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP PTI
 CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.0.0-rc4.gotochain_crash+ #533
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffff8c2434703be0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff8c23ed6d7e00 RCX: 000000000000005a
 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8c23ed6d7e00
 RBP: ffff8c2434703c80 R08: ffff8c243b639ac8 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8c2429e68b00
 R13: ffff8c2429e68b08 R14: 0000000000000001 R15: ffff8c2429c5a480
 FS:  0000000000000000(0000) GS:ffff8c2434700000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 000000002dc0e005 CR4: 00000000001606e0
 Call Trace:
  <IRQ>
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ip6_finish_output2+0x369/0x590
  ip6_finish_output2+0x369/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.35+0x79/0xc0
  mld_sendpack+0x16f/0x220
  mld_ifc_timer_expire+0x195/0x2c0
  ? igmp6_timer_handler+0x70/0x70
  call_timer_fn+0x2b/0x130
  run_timer_softirq+0x3e8/0x440
  ? tick_sched_timer+0x37/0x70
  __do_softirq+0xe3/0x2f5
  irq_exit+0xf0/0x100
  smp_apic_timer_interrupt+0x6c/0x130
  apic_timer_interrupt+0xf/0x20
  </IRQ>
 RIP: 0010:native_safe_halt+0x2/0x10
 Code: 74 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
 RSP: 0018:ffff9c8640387eb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
 RAX: ffffffff8b2184f0 RBX: 0000000000000002 RCX: 0000000000000001
 RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000002
 RBP: 0000000000000002 R08: 000eb57882b36cc3 R09: 0000000000000020
 R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
  ? __sched_text_end+0x1/0x1
  default_idle+0x1c/0x140
  do_idle+0x1c4/0x280
  cpu_startup_entry+0x19/0x20
  start_secondary+0x1a7/0x200
  secondary_startup_64+0xa4/0xb0
 Modules linked in: act_gact act_bpf veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic ext4 snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core mbcache jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper virtio_balloon joydev pcspkr snd_timer snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea virtio_net sysfillrect net_failover virtio_blk sysimgblt fb_sys_fops virtio_console ttm failover drm crc32c_intel serio_raw ata_piix libata floppy virtio_pci virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_bpf]
 CR2: 0000000000000000

Validating the control action within tcf_gact_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
f5c29d8386 net/sched: act_csum: validate the control action inside init()
the following script:

 # tc qdisc add dev crash0 clsact
 # tc filter add dev crash0 egress matchall action csum icmp pass index 90
 # tc actions replace action csum icmp goto chain 42 index 90 \
 > cookie c1a0c1a0
 # tc actions show action csum

had the following output:

Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1

        action order 0: csum (icmp) action goto chain 42
        index 90 ref 2 bind 1
        cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 8000000074692067 P4D 8000000074692067 PUD 2e210067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.0.0-rc4.gotochain_crash+ #533
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffff93153da03be0 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff9314ee40f700 RCX: 0000000000003a00
 RDX: 0000000000000000 RSI: ffff931537c87828 RDI: ffff931537c87818
 RBP: ffff93153da03c80 R08: 00000000527cffff R09: 0000000000000003
 R10: 000000000000003f R11: 0000000000000028 R12: ffff9314edf68400
 R13: ffff9314edf68408 R14: 0000000000000001 R15: ffff9314ed67b600
 FS:  0000000000000000(0000) GS:ffff93153da00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 0000000073e32003 CR4: 00000000001606f0
 Call Trace:
  <IRQ>
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ip6_finish_output2+0x369/0x590
  ip6_finish_output2+0x369/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.35+0x79/0xc0
  mld_sendpack+0x16f/0x220
  mld_ifc_timer_expire+0x195/0x2c0
  ? igmp6_timer_handler+0x70/0x70
  call_timer_fn+0x2b/0x130
  run_timer_softirq+0x3e8/0x440
  ? tick_sched_timer+0x37/0x70
  __do_softirq+0xe3/0x2f5
  irq_exit+0xf0/0x100
  smp_apic_timer_interrupt+0x6c/0x130
  apic_timer_interrupt+0xf/0x20
  </IRQ>
 RIP: 0010:native_safe_halt+0x2/0x10
 Code: 66 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
 RSP: 0018:ffffffff9a803e98 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
 RAX: ffffffff99e184f0 RBX: 0000000000000000 RCX: 0000000000000001
 RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000000
 RBP: 0000000000000000 R08: 000eb5c4572376b3 R09: 0000000000000000
 R10: ffffa53e806a3ca0 R11: 00000000000f4240 R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
  ? __sched_text_end+0x1/0x1
  default_idle+0x1c/0x140
  do_idle+0x1c4/0x280
  cpu_startup_entry+0x19/0x20
  start_kernel+0x49e/0x4be
  secondary_startup_64+0xa4/0xb0
 Modules linked in: act_csum veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel mbcache snd_hda_codec jbd2 snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt net_failover fb_sys_fops virtio_console virtio_blk ttm failover drm ata_piix crc32c_intel floppy virtio_pci serio_raw libata virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_csum_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
4e1810049c net/sched: act_bpf: validate the control action inside init()
the following script:

 # tc filter add dev crash0 egress matchall \
 > action bpf bytecode '1,6 0 0 4294967295' pass index 90
 # tc actions replace action bpf \
 > bytecode '1,6 0 0 4294967295' goto chain 42 index 90 cookie c1a0c1a0
 # tc action show action bpf

had the following output:

 Error: Failed to init TC action chain.
 We have an error talking to the kernel
 total acts 1

         action order 0: bpf bytecode '1,6 0 0 4294967295' default-action goto chain 42
         index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffffb3a0803dfa90 EFLAGS: 00010246
 RAX: 000000002000002a RBX: ffff942b347ada00 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffb3a08034d038 RDI: ffff942b347ada00
 RBP: ffffb3a0803dfb30 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: ffffb3a0803dfb0c R12: ffff942b3b682b00
 R13: ffff942b3b682b08 R14: 0000000000000001 R15: ffff942b3b682f00
 FS:  00007f6160a72740(0000) GS:ffff942b3da80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 00000000795a4002 CR4: 00000000001606e0
 Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ip_finish_output2+0x16f/0x430
  ip_finish_output2+0x16f/0x430
  ? ip_output+0x69/0xe0
  ip_output+0x69/0xe0
  ? ip_forward_options+0x1a0/0x1a0
  ip_send_skb+0x15/0x40
  raw_sendmsg+0x8e1/0xbd0
  ? sched_clock+0x5/0x10
  ? sched_clock_cpu+0xc/0xa0
  ? try_to_wake_up+0x54/0x480
  ? ldsem_down_read+0x3f/0x280
  ? _cond_resched+0x15/0x40
  ? down_read+0xe/0x30
  ? copy_termios+0x1e/0x70
  ? tty_mode_ioctl+0x1b6/0x4c0
  ? sock_sendmsg+0x36/0x40
  sock_sendmsg+0x36/0x40
  __sys_sendto+0x10e/0x140
  ? do_vfs_ioctl+0xa4/0x640
  ? handle_mm_fault+0xdc/0x210
  ? syscall_trace_enter+0x1df/0x2e0
  ? __audit_syscall_exit+0x216/0x260
  __x64_sys_sendto+0x24/0x30
  do_syscall_64+0x5b/0x180
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7f615f7e3c03
 Code: 48 8b 0d 90 62 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 9d c3 2c 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 4b cc 00 00 48 89 04 24
 RSP: 002b:00007ffee5d8cc28 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
 RAX: ffffffffffffffda RBX: 000055a4f28f1700 RCX: 00007f615f7e3c03
 RDX: 0000000000000040 RSI: 000055a4f28f1700 RDI: 0000000000000003
 RBP: 00007ffee5d8e340 R08: 000055a4f28ee510 R09: 0000000000000010
 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
 R13: 000055a4f28f16c0 R14: 000055a4f28ef69c R15: 0000000000000080
 Modules linked in: act_bpf veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache crct10dif_pclmul jbd2 crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper pcspkr joydev virtio_balloon snd_timer snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper virtio_blk virtio_net virtio_console net_failover failover syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel ata_piix serio_raw libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

Validating the control action within tcf_bpf_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
Davide Caratti
85d0966fa5 net/sched: prepare TC actions to properly validate the control action
- pass a pointer to struct tcf_proto in each actions's init() handler,
  to allow validating the control action, checking whether the chain
  exists and (eventually) refcounting it.
- remove code that validates the control action after a successful call
  to the action's init() handler, and replace it with a test that forbids
  addition of actions having 'goto_chain' and NULL goto_chain pointer at
  the same time.
- add tcf_action_check_ctrlact(), that will validate the control action
  and eventually allocate the action 'goto_chain' within the init()
  handler.
- add tcf_action_set_ctrlact(), that will assign the control action and
  swap the current 'goto_chain' pointer with the new given one.

This disallows 'goto_chain' on actions that don't initialize it properly
in their init() handler, i.e. calling tcf_action_check_ctrlact() after
successful IDR reservation and then calling tcf_action_set_ctrlact()
to assign 'goto_chain' and 'tcf_action' consistently.

By doing this, the kernel does not leak anymore refcounts when a valid
'goto chain' handle is replaced in TC actions, causing kmemleak splats
like the following one:

 # tc chain add dev dd0 chain 42 ingress protocol ip flower \
 > ip_proto tcp action drop
 # tc chain add dev dd0 chain 43 ingress protocol ip flower \
 > ip_proto udp action drop
 # tc filter add dev dd0 ingress matchall \
 > action gact goto chain 42 index 66
 # tc filter replace dev dd0 ingress matchall \
 > action gact goto chain 43 index 66
 # echo scan >/sys/kernel/debug/kmemleak
 <...>
 unreferenced object 0xffff93c0ee09f000 (size 1024):
 comm "tc", pid 2565, jiffies 4295339808 (age 65.426s)
 hex dump (first 32 bytes):
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
   00 00 00 00 08 00 06 00 00 00 00 00 00 00 00 00  ................
 backtrace:
   [<000000009b63f92d>] tc_ctl_chain+0x3d2/0x4c0
   [<00000000683a8d72>] rtnetlink_rcv_msg+0x263/0x2d0
   [<00000000ddd88f8e>] netlink_rcv_skb+0x4a/0x110
   [<000000006126a348>] netlink_unicast+0x1a0/0x250
   [<00000000b3340877>] netlink_sendmsg+0x2c1/0x3c0
   [<00000000a25a2171>] sock_sendmsg+0x36/0x40
   [<00000000f19ee1ec>] ___sys_sendmsg+0x280/0x2f0
   [<00000000d0422042>] __sys_sendmsg+0x5e/0xa0
   [<000000007a6c61f9>] do_syscall_64+0x5b/0x180
   [<00000000ccd07542>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
   [<0000000013eaa334>] 0xffffffffffffffff

Fixes: db50514f9a ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f4 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:26:41 -07:00
David S. Miller
e0831ef716 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree:

1) Remove a direct dependency with IPv6 introduced by the
   sip_external_media feature, from Alin Nastac.

2) Fix bogus ENOENT when removing interval elements from set.

3) Set transport_header from br_netfilter to mimic the stack
   behaviour, this partially fixes a checksum validation bug
   from the SCTP connection tracking, from Xin Long.

4) Fix undefined reference to symbol in xt_TEE, due to missing
   Kconfig dependencies, from Arnd Bergmann.

5) Check for NULL in skb_header_pointer() calls in ip6t_shr,
   from Kangjie Lu.

6) Fix bogus EBUSY when removing an existing conntrack helper from
   a transaction.

7) Fix module autoload of the redirect extension.

8) Remove duplicated transition in flowtable diagram in the existing
   documentation.

9) Missing .release_ops call from error path in newrule() which
   results module refcount leak, from Taehee Yoo.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 10:07:00 -07:00
YueHaibing
ceabee6c59 genetlink: Fix a memory leak on error path
In genl_register_family(), when idr_alloc() fails,
we forget to free the memory we possibly allocate for
family->attrbuf.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 2ae0f17df1 ("genetlink: use idr to track families")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 09:29:06 -07:00
Erik Hugne
33872d79f5 tipc: fix cancellation of topology subscriptions
When cancelling a subscription, we have to clear the cancel bit in the
request before iterating over any established subscriptions with memcmp.
Otherwise no subscription will ever be found, and it will not be
possible to explicitly unsubscribe individual subscriptions.

Fixes: 8985ecc7c1 ("tipc: simplify endianness handling in topology subscriber")
Signed-off-by: Erik Hugne <erik.hugne@gmail.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 09:09:04 -07:00
Xin Long
ef82bcfa67 sctp: use memdup_user instead of vmemdup_user
In sctp_setsockopt_bindx()/__sctp_setsockopt_connectx(), it allocates
memory with addrs_size which is passed from userspace. We used flag
GFP_USER to put some more restrictions on it in Commit cacc062152
("sctp: use GFP_USER for user-controlled kmalloc").

However, since Commit c981f254cc ("sctp: use vmemdup_user() rather
than badly open-coding memdup_user()"), vmemdup_user() has been used,
which doesn't check GFP_USER flag when goes to vmalloc_*(). So when
addrs_size is a huge value, it could exhaust memory and even trigger
oom killer.

This patch is to use memdup_user() instead, in which GFP_USER would
work to limit the memory allocation with a huge addrs_size.

Note we can't fix it by limiting 'addrs_size', as there's no demand
for it from RFC.

Reported-by: syzbot+ec1b7575afef85a0e5ca@syzkaller.appspotmail.com
Fixes: c981f254cc ("sctp: use vmemdup_user() rather than badly open-coding memdup_user()")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-20 11:09:47 -07:00
Xin Long
1c87e79a00 ipv6: make ip6_create_rt_rcu return ip6_null_entry instead of NULL
Jianlin reported a crash:

  [  381.484332] BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
  [  381.619802] RIP: 0010:fib6_rule_lookup+0xa3/0x160
  [  382.009615] Call Trace:
  [  382.020762]  <IRQ>
  [  382.030174]  ip6_route_redirect.isra.52+0xc9/0xf0
  [  382.050984]  ip6_redirect+0xb6/0xf0
  [  382.066731]  icmpv6_notify+0xca/0x190
  [  382.083185]  ndisc_redirect_rcv+0x10f/0x160
  [  382.102569]  ndisc_rcv+0xfb/0x100
  [  382.117725]  icmpv6_rcv+0x3f2/0x520
  [  382.133637]  ip6_input_finish+0xbf/0x460
  [  382.151634]  ip6_input+0x3b/0xb0
  [  382.166097]  ipv6_rcv+0x378/0x4e0

It was caused by the lookup function __ip6_route_redirect() returns NULL in
fib6_rule_lookup() when ip6_create_rt_rcu() returns NULL.

So we fix it by simply making ip6_create_rt_rcu() return ip6_null_entry
instead of NULL.

v1->v2:
  - move down 'fallback:' to make it more readable.

Fixes: e873e4b9cc ("ipv6: use fib6_info_hold_safe() when necessary")
Reported-by: Jianlin Shi <jishi@redhat.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-20 11:06:56 -07:00
Christoph Paasch
398f0132c1 net/packet: Set __GFP_NOWARN upon allocation in alloc_pg_vec
Since commit fc62814d69 ("net/packet: fix 4gb buffer limit due to overflow check")
one can now allocate packet ring buffers >= UINT_MAX. However, syzkaller
found that that triggers a warning:

[   21.100000] WARNING: CPU: 2 PID: 2075 at mm/page_alloc.c:4584 __alloc_pages_nod0
[   21.101490] Modules linked in:
[   21.101921] CPU: 2 PID: 2075 Comm: syz-executor.0 Not tainted 5.0.0 #146
[   21.102784] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
[   21.103887] RIP: 0010:__alloc_pages_nodemask+0x2a0/0x630
[   21.104640] Code: fe ff ff 65 48 8b 04 25 c0 de 01 00 48 05 90 0f 00 00 41 bd 01 00 00 00 48 89 44 24 48 e9 9c fe 3
[   21.107121] RSP: 0018:ffff88805e1cf920 EFLAGS: 00010246
[   21.107819] RAX: 0000000000000000 RBX: ffffffff85a488a0 RCX: 0000000000000000
[   21.108753] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000000
[   21.109699] RBP: 1ffff1100bc39f28 R08: ffffed100bcefb67 R09: ffffed100bcefb67
[   21.110646] R10: 0000000000000001 R11: ffffed100bcefb66 R12: 000000000000000d
[   21.111623] R13: 0000000000000000 R14: ffff88805e77d888 R15: 000000000000000d
[   21.112552] FS:  00007f7c7de05700(0000) GS:ffff88806d100000(0000) knlGS:0000000000000000
[   21.113612] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   21.114405] CR2: 000000000065c000 CR3: 000000005e58e006 CR4: 00000000001606e0
[   21.115367] Call Trace:
[   21.115705]  ? __alloc_pages_slowpath+0x21c0/0x21c0
[   21.116362]  alloc_pages_current+0xac/0x1e0
[   21.116923]  kmalloc_order+0x18/0x70
[   21.117393]  kmalloc_order_trace+0x18/0x110
[   21.117949]  packet_set_ring+0x9d5/0x1770
[   21.118524]  ? packet_rcv_spkt+0x440/0x440
[   21.119094]  ? lock_downgrade+0x620/0x620
[   21.119646]  ? __might_fault+0x177/0x1b0
[   21.120177]  packet_setsockopt+0x981/0x2940
[   21.120753]  ? __fget+0x2fb/0x4b0
[   21.121209]  ? packet_release+0xab0/0xab0
[   21.121740]  ? sock_has_perm+0x1cd/0x260
[   21.122297]  ? selinux_secmark_relabel_packet+0xd0/0xd0
[   21.123013]  ? __fget+0x324/0x4b0
[   21.123451]  ? selinux_netlbl_socket_setsockopt+0x101/0x320
[   21.124186]  ? selinux_netlbl_sock_rcv_skb+0x3a0/0x3a0
[   21.124908]  ? __lock_acquire+0x529/0x3200
[   21.125453]  ? selinux_socket_setsockopt+0x5d/0x70
[   21.126075]  ? __sys_setsockopt+0x131/0x210
[   21.126533]  ? packet_release+0xab0/0xab0
[   21.127004]  __sys_setsockopt+0x131/0x210
[   21.127449]  ? kernel_accept+0x2f0/0x2f0
[   21.127911]  ? ret_from_fork+0x8/0x50
[   21.128313]  ? do_raw_spin_lock+0x11b/0x280
[   21.128800]  __x64_sys_setsockopt+0xba/0x150
[   21.129271]  ? lockdep_hardirqs_on+0x37f/0x560
[   21.129769]  do_syscall_64+0x9f/0x450
[   21.130182]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

We should allocate with __GFP_NOWARN to handle this.

Cc: Kal Conley <kal.conley@dectris.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Fixes: fc62814d69 ("net/packet: fix 4gb buffer limit due to overflow check")
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-20 10:46:50 -07:00
Ilya Dryomov
bb229bbb3b libceph: wait for latest osdmap in ceph_monc_blacklist_add()
Because map updates are distributed lazily, an OSD may not know about
the new blacklist for quite some time after "osd blacklist add" command
is completed.  This makes it possible for a blacklisted but still alive
client to overwrite a post-blacklist update, resulting in data
corruption.

Waiting for latest osdmap in ceph_monc_blacklist_add() and thus using
the post-blacklist epoch for all post-blacklist requests ensures that
all such requests "wait" for the blacklist to come into force on their
respective OSDs.

Cc: stable@vger.kernel.org
Fixes: 6305a3b415 ("libceph: support for blacklisting clients")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
2019-03-20 16:27:40 +01:00
Taehee Yoo
b25a31bf0c netfilter: nf_tables: add missing ->release_ops() in error path of newrule()
->release_ops() callback releases resources and this is used in error path.
If nf_tables_newrule() fails after ->select_ops(), it should release
resources. but it can not call ->destroy() because that should be called
after ->init().
At this point, ->release_ops() should be used for releasing resources.

Test commands:
   modprobe -rv xt_tcpudp
   iptables-nft -I INPUT -m tcp   <-- error command
   lsmod

Result:
   Module                  Size  Used by
   xt_tcpudp              20480  2      <-- it should be 0

Fixes: b8e2040063 ("netfilter: nft_compat: use .release_ops and remove list of extension")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-03-20 08:32:58 +01:00
Vinay K Nallamothu
f84532ce58 mpls: Fix 6PE forwarding
This patch adds support for 6PE (RFC 4798) which uses IPv4-mapped IPv6
nexthop to connect IPv6 islands over IPv4 only MPLS network core.

Prior to this fix, to find the link-layer destination mac address, 6PE
enabled host/router was sending IPv6 ND requests for IPv4-mapped IPv6
nexthop address over the interface facing the IPv4 only core which
wouldn't success as the core is IPv6 free.

This fix changes that behavior on 6PE host to treat the nexthop as IPv4
address and send ARP requests whenever the next-hop address is an
IPv4-mapped IPv6 address.

Below topology illustrates the issue and how the patch addresses it.

abcd::1.1.1.1 (lo)                                              abcd::2.2.2.2 (lo)
R0 (PE/host)------------------------R1--------------------------------R2 (PE/host)
            <--- IPv4 MPLS core --->   <------ IPv4 MPLS core -------->
           eth1               eth2       eth3                       eth4
          172.18.0.10     172.18.0.11   172.19.0.11              172.19.0.12
    ffff::172.18.0.10                                      ffff::172.19.0.12
            <------------------IPv6 MPLS tunnel ---------------------->

R0 and R2 act as 6PE routers of IPv6 islands. R1 is IPv4 only with MPLS tunnels
between R0,R1 and R1,R2.

 docker exec r0 ip -f inet6 route add abcd::2.2.2.2/128 nexthop encap mpls 100 via ::ffff:172.18.0.11 dev eth1
 docker exec r2 ip -f inet6 route add abcd::1.1.1.1/128 nexthop encap mpls 200 via ::ffff:172.19.0.11 dev eth4

 docker exec r1 ip -f mpls route add 100 via inet 172.19.0.12 dev eth3
 docker exec r1 ip -f mpls route add 200 via inet 172.18.0.10 dev eth2

With the change, when R0 sends an IPv6 packet over MPLS tunnel to abcd::2.2.2.2,
using ::ffff:172.18.0.11 as the nexthop, it does neighbor discovery for
172.18.18.0.11.

Signed-off-by: Vinay K Nallamothu <nvinay@juniper.net>
Tested-by: Avinash Lingala <ar977m@att.com>
Tested-by: Aravind Srinivas Srinivasa Prabhakar <aprabh@juniper.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19 16:00:22 -07:00
Eric Dumazet
e0aa67709f dccp: do not use ipv6 header for ipv4 flow
When a dual stack dccp listener accepts an ipv4 flow,
it should not attempt to use an ipv6 header or
inet6_iif() helper.

Fixes: 3df80d9320 ("[DCCP]: Introduce DCCPv6")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19 14:01:40 -07:00
Eric Dumazet
89e4130939 tcp: do not use ipv6 header for ipv4 flow
When a dual stack tcp listener accepts an ipv4 flow,
it should not attempt to use an ipv6 header or tcp_v6_iif() helper.

Fixes: 1397ed35f2 ("ipv6: add flowinfo for tcp6 pkt_options for all cases")
Fixes: df3687ffc6 ("ipv6: add the IPV6_FL_F_REFLECT flag to IPV6_FL_A_GET")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19 14:00:27 -07:00
Aditya Pakki
d7737d4257 nfc: Fix to check for kmemdup failure
In case of kmemdup failure while setting the service name the patch
returns -ENOMEM upstream for processing.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19 13:48:07 -07:00
YueHaibing
a3e23f719f net-sysfs: call dev_hold if kobject_init_and_add success
In netdev_queue_add_kobject and rx_queue_add_kobject,
if sysfs_create_group failed, kobject_put will call
netdev_queue_release to decrease dev refcont, however
dev_hold has not be called. So we will see this while
unregistering dev:

unregister_netdevice: waiting for bcsh0 to become free. Usage count = -1

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: d0d6683716 ("net: don't decrement kobj reference count on init failure")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19 13:45:58 -07:00
Xin Long
b59c19d9d9 sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_STREAM_SCHEDULER sockopt
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_STREAM_SCHEDULER sockopt.

Fixes: 7efba10d6b ("sctp: add SCTP_FUTURE_ASOC and SCTP_CURRENT_ASSOC for SCTP_STREAM_SCHEDULER sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18 18:31:09 -07:00
Xin Long
995186193f sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_EVENT sockopt
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_EVENT sockopt.

Fixes: d251f05e3b ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_EVENT sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18 18:31:09 -07:00
Xin Long
9430ff9926 sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_ENABLE_STREAM_RESET sockopt
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_ENABLE_STREAM_RESET sockopt.

Fixes: 99a62135e1 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_ENABLE_STREAM_RESET sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18 18:31:09 -07:00
Xin Long
cbb45c6cd5 sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_PRINFO sockopt
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_DEFAULT_PRINFO sockopt.

Fixes: 3a583059d1 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_DEFAULT_PRINFO sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18 18:31:09 -07:00
Xin Long
200f3a3bcb sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_AUTH_DEACTIVATE_KEY sockopt
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_AUTH_DEACTIVATE_KEY sockopt.

Fixes: 2af66ff3ed ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_AUTH_DEACTIVATE_KEY sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18 18:31:09 -07:00
Xin Long
220675eb2e sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_AUTH_DELETE_KEY sockopt
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_AUTH_DELETE_KEY sockopt.

Fixes: 3adcc30060 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_AUTH_DELETE_KEY sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18 18:31:09 -07:00
Xin Long
06b39e8506 sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_AUTH_ACTIVE_KEY sockopt
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_AUTH_ACTIVE_KEY sockopt.

Fixes: bf9fb6ad4f ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_AUTH_ACTIVE_KEY sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18 18:31:09 -07:00
Xin Long
0685d6b722 sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_AUTH_KEY sockopt
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_AUTH_KEY sockopt.

Fixes: 7fb3be13a2 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_AUTH_KEY sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18 18:31:09 -07:00
Xin Long
746bc215a6 sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_MAX_BURST sockopt
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_MAX_BURST sockopt.

Fixes: e0651a0dc8 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_MAX_BURST sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18 18:31:09 -07:00