This config exists entirely to hide the cpufreq menu from the
kernel configuration unless a platform has selected it. Nothing
is actually built if this config is 'Y' and it just leads to more
patches that add a select under a platform Kconfig so that some
other CPUfreq option can be chosen. Let's remove the option so
that we can always enable CPUfreq drivers on ARM platforms.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This addresses a section mismatch problem in the IM-PD1
driver in the Integrator/AP.
The IM-PD1 contains a VIC interrupt controller and therefore
the driver calls vic_init_cascaded() which is marked __init as
irqchips are simply not hot-pluggable and specifically the VIC
is assumed to initiate only on boot.
However the module driver model of the Integrator LM bus
assumes that logic tile drivers can be probed at runtime. This
is not really the case for IM-PD1: these tiles are detected at
boot and they cannot be plugged into a running system. Before
this patch it is of course possible to modprobe them later.
By first forcing the IM-PD1 to bool we make sure this driver
gets compiled into the kernel, and we know it will be probed
only at boot time when the tiles are detected, so we can tag
its probe function __init_refok as we know it won't be called
after boot now, and the section mismatch problem goes away.
As a side effect, sysfs binding from userspace becomes
impossible, so we tag the driver to suppress the bind/unbind
sysfs attributes.
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The OpenBlocks AX3-4 has a non-DT bootloader. It also comes with 1GB of
soldered on RAM, and a DIMM slot for expansion.
Unfortunately, atags_to_fdt() doesn't work in big-endian mode, so we see
the following failure when attempting to boot a big-endian kernel:
686 slab pages
17 pages shared
0 pages swap cached
[ pid ] uid tgid total_vm rss nr_ptes swapents oom_score_adj name
Kernel panic - not syncing: Out of memory and no killable processes...
CPU: 1 PID: 351 Comm: kworker/u4:0 Not tainted 3.15.0-rc8-next-20140603 #1
[<c0215a54>] (unwind_backtrace) from [<c021160c>] (show_stack+0x10/0x14)
[<c021160c>] (show_stack) from [<c0802500>] (dump_stack+0x78/0x94)
[<c0802500>] (dump_stack) from [<c0800068>] (panic+0x90/0x21c)
[<c0800068>] (panic) from [<c02b5704>] (out_of_memory+0x320/0x340)
[<c02b5704>] (out_of_memory) from [<c02b93a0>] (__alloc_pages_nodemask+0x874/0x930)
[<c02b93a0>] (__alloc_pages_nodemask) from [<c02d446c>] (handle_mm_fault+0x744/0x96c)
[<c02d446c>] (handle_mm_fault) from [<c02cf250>] (__get_user_pages+0xd0/0x4c0)
[<c02cf250>] (__get_user_pages) from [<c02f3598>] (get_arg_page+0x54/0xbc)
[<c02f3598>] (get_arg_page) from [<c02f3878>] (copy_strings+0x278/0x29c)
[<c02f3878>] (copy_strings) from [<c02f38bc>] (copy_strings_kernel+0x20/0x28)
[<c02f38bc>] (copy_strings_kernel) from [<c02f4f1c>] (do_execve+0x3a8/0x4c8)
[<c02f4f1c>] (do_execve) from [<c025ac10>] (____call_usermodehelper+0x15c/0x194)
[<c025ac10>] (____call_usermodehelper) from [<c020e9b8>] (ret_from_fork+0x14/0x3c)
CPU0: stopping
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-rc8-next-20140603 #1
[<c0215a54>] (unwind_backtrace) from [<c021160c>] (show_stack+0x10/0x14)
[<c021160c>] (show_stack) from [<c0802500>] (dump_stack+0x78/0x94)
[<c0802500>] (dump_stack) from [<c021429c>] (handle_IPI+0x138/0x174)
[<c021429c>] (handle_IPI) from [<c02087f0>] (armada_370_xp_handle_irq+0xb0/0xcc)
[<c02087f0>] (armada_370_xp_handle_irq) from [<c0212100>] (__irq_svc+0x40/0x50)
Exception stack(0xc0b6bf68 to 0xc0b6bfb0)
bf60: e9fad598 00000000 00f509a3 00000000 c0b6a000 c0b724c4
bf80: c0b72458 c0b6a000 00000000 00000000 c0b66da0 c0b6a000 00000000 c0b6bfb0
bfa0: c027bb94 c027bb24 60000313 ffffffff
[<c0212100>] (__irq_svc) from [<c027bb24>] (cpu_startup_entry+0x54/0x214)
[<c027bb24>] (cpu_startup_entry) from [<c0ac5b30>] (start_kernel+0x318/0x37c)
[<c0ac5b30>] (start_kernel) from [<00208078>] (0x208078)
---[ end Kernel panic - not syncing: Out of memory and no killable processes...
A similar failure will also occur if ARM_ATAG_DTB_COMPAT isn't selected.
Fix this by setting a sane default (1 GB) in the dts file.
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Kevin Hilman <khilman@linaro.org>
Cc: <stable@vger.kernel.org> #v3.13+
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The only remaining driver using the samsung dmadev code is the broken
samsung-ac97 sound driver. However, as found by Russell's autobuilder,
the elaborate dependency chains around it cause problems with
circular dependencies.
This is an attempt to simplify those dependencies by making the
SAMSUNG_DMADEV option user-selectable. I also try to keep the
default settings for all related options unchanged, so we don't
introduce any regressions against earlier testing on linux-next.
In particular, all s3c64xx and s5p* platforms keep selecting the
pl330 and pl08x drivers they require, but the select statement
is now moved towards the main platform option, and it remains
optional by unselecting CONFIG_DMADEVICES.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Kukjin Kim <kgene.kim@samsung.com>
We can only use CMA on systems that have an MMU, because of
the requirement to use memory migration. NOMMU systems are
rather constrained to start with, but it seems reasonable
to assume that DMA allocations can still succeed in the
constrained case for remoteproc on NOMMU, so this patch
changes the da8xx implementation to not rely on CMA when
the MMU is disabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Robert Tivy <rtivy@ti.com>
The arm-cci code uses device tree helpers for initialization
that don't work on kernels built without CONFIG_OF. Further,
it contains an inline assembly in cci_enable_port_for_self()
that uses ARMv7 instructions and fails to build when targetting
other ARM instruction set versions.
This works around both issues by limiting the scope of the
Kconfig symbol to platforms that can actually build this driver
cleanly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
The dynamic relocation that the keystone platform performs
only works if we can pick the phys offset at boot time. It's
possible that there is another solution for this, but this
is the easiest workaround. Kernels with ARM_PATCH_PHYS_VIRT
are not portable across platforms, and I see no reason why
anyone would run a kernel without ARM_PATCH_PHYS_VIRT on
keystone.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Commit d941f86fad ("ARM: l2c: AM43x: add L2 cache support") enabled
the L2 cache support for the am43xx SoC, but caused a build regression
when the driver for that cache controller is disabled:
arch/arm/mach-omap2/built-in.o: In function `am43xx_init_early':
:(.init.text+0xb20): undefined reference to `omap_l2_cache_init'
This did not happen for OMAP4, which has the same call, but enables
the l2x0 driver unconditionally. We could do the same thing for
am43xx, but it seems better to allow turning it off and make the
code work in either case.
This adds an inline wrapper for omap_l2_cache_init for the disabled
case, and removes the 'select' from OMAP4 so it becomes a user
visible option.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
This is a small follow-up to the larger ARM SoC updates merged
last week, almost entirely for the keystone platform.
The main change here is to use the new dma-ranges parsing code
that came in through Russell's ARM tree. This allows the keystone
platform to do cache-coherent DMA and to finally support all the
available physical memory when LPAE is enabled.
Aside from this, the keystone reset driver has been rewritten,
and there is a small bug fix to allow building the orion5x platform
again.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=AqkT
-----END PGP SIGNATURE-----
Merge tag 'soc2-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull part two of ARM SoC updates from Arnd Bergmann:
"This is a small follow-up to the larger ARM SoC updates merged last
week, almost entirely for the keystone platform.
The main change here is to use the new dma-ranges parsing code that
came in through Russell's ARM tree. This allows the keystone platform
to do cache-coherent DMA and to finally support all the available
physical memory when LPAE is enabled.
Aside from this, the keystone reset driver has been rewritten, and
there is a small bug fix to allow building the orion5x platform again"
* tag 'soc2-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: keystone: Drop use of meminfo since its not available anymore
ARM: orion5x: fix mvebu_mbus_dt_init call
ARM: configs: keystone: enable reset driver support
ARM: dts: keystone: update reset node to work with reset driver
ARM: keystone: remove redundant reset stuff
ARM: keystone: Update the dma offset for non-dt platform devices
ARM: keystone: Switch over to coherent memory address space
ARM: configs: keystone: add MTD_SPI_NOR (new dependency for M25P80)
ARM: configs: keystone: drop CONFIG_COMMON_CLK_DEBUG
Pull reiserfs and ext3 changes from Jan Kara:
"Big reiserfs cleanup from Jeff, an ext3 deadlock fix, and some small
cleanups"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (34 commits)
reiserfs: Fix compilation breakage with CONFIG_REISERFS_CHECK
ext3: Fix deadlock in data=journal mode when fs is frozen
reiserfs: call truncate_setsize under tailpack mutex
fs/jbd/revoke.c: replace shift loop by ilog2
reiserfs: remove obsolete __constant_cpu_to_le32
reiserfs: balance_leaf refactor, split up balance_leaf_when_delete
reiserfs: balance_leaf refactor, format balance_leaf_finish_node
reiserfs: balance_leaf refactor, format balance_leaf_new_nodes_paste
reiserfs: balance_leaf refactor, format balance_leaf_paste_right
reiserfs: balance_leaf refactor, format balance_leaf_insert_right
reiserfs: balance_leaf refactor, format balance_leaf_paste_left
reiserfs: balance_leaf refactor, format balance_leaf_insert_left
reiserfs: balance_leaf refactor, pull out balance_leaf{left, right, new_nodes, finish_node}
reiserfs: balance_leaf refactor, pull out balance_leaf_finish_node_paste
reiserfs: balance_leaf refactor pull out balance_leaf_finish_node_insert
reiserfs: balance_leaf refactor, pull out balance_leaf_new_nodes_paste
reiserfs: balance_leaf refactor, pull out balance_leaf_new_nodes_insert
reiserfs: balance_leaf refactor, pull out balance_leaf_paste_right
reiserfs: balance_leaf refactor, pull out balance_leaf_insert_right
reiserfs: balance_leaf refactor, pull out balance_leaf_paste_left
...
Pull btrfs updates from Chris Mason:
"The biggest change here is Josef's rework of the btrfs quota
accounting, which improves the in-memory tracking of delayed extent
operations.
I had been working on Btrfs stack usage for a while, mostly because it
had become impossible to do long stress runs with slab, lockdep and
pagealloc debugging turned on without blowing the stack. Even though
you upgraded us to a nice king sized stack, I kept most of the
patches.
We also have some very hard to find corruption fixes, an awesome sysfs
use after free, and the usual assortment of optimizations, cleanups
and other fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (80 commits)
Btrfs: convert smp_mb__{before,after}_clear_bit
Btrfs: fix scrub_print_warning to handle skinny metadata extents
Btrfs: make fsync work after cloning into a file
Btrfs: use right type to get real comparison
Btrfs: don't check nodes for extent items
Btrfs: don't release invalid page in btrfs_page_exists_in_range()
Btrfs: make sure we retry if page is a retriable exception
Btrfs: make sure we retry if we couldn't get the page
btrfs: replace EINVAL with EOPNOTSUPP for dev_replace raid56
trivial: fs/btrfs/ioctl.c: fix typo s/substract/subtract/
Btrfs: fix leaf corruption after __btrfs_drop_extents
Btrfs: ensure btrfs_prev_leaf doesn't miss 1 item
Btrfs: fix clone to deal with holes when NO_HOLES feature is enabled
btrfs: free delayed node outside of root->inode_lock
btrfs: replace EINVAL with ERANGE for resize when ULLONG_MAX
Btrfs: fix transaction leak during fsync call
btrfs: Avoid trucating page or punching hole in a already existed hole.
Btrfs: update commit root on snapshot creation after orphan cleanup
Btrfs: ioctl, don't re-lock extent range when not necessary
Btrfs: avoid visiting all extent items when cloning a range
...
This update contains:
o cleanup removing unused function args
o rework of the filestreams allocator to use dentry cache parent lookups
o new on-disk free inode btree and optimised inode allocator
o various bug fixes
o rework of internal attribute API
o cleanup of superblock feature bit support to remove historic cruft
o more fixes and minor cleanups
o added a new directory/attribute geometry abstraction
o yet more fixes and minor cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJTl+YfAAoJEK3oKUf0dfod/T8QALmvR28JZTL3vtlD5rppXp9+
DXOMrwgJ9V+GOI39tpUgw1u/C5DuaFPRPtmCjnb9Do4DJMrHj+zD8ADvoVd6asa0
FHH4TuulQqOJVu67SZ3ng15yjyy+wPfymQZIQPQY/IwVMUUEpWnSFnKha1GAsL8Y
RY/WNU50wMu4wxi0++ENooHJC2EoxXpzB80cHddN81zFEFZobw0cm5Aa5xBZEZ4i
P+GpEuUpWHKvVaWRLuIMgVC0NuOt5KtLfS97ong+tRgWCw//QVl28Rxhrj1ZHsF3
VAskVsSFVIIPHP7qKjQyCGk71iqBfrfAgRqqJHFZgSmtSzyK3hVvJlRRDdCT5hi6
00aHg9vz9815I7zrQwyMuy872N3DTislOxJZGD7PKgLpgfeHs4qk+cQ1xCi2gdFn
xnh2p4mLolZHzanUsoxYpSh7f7o+NT3xgET3yS63uuO/I57o74JJDfRDjWNX6I9F
LLtIGb1cwVFUYbXcHGfP1wxQ1BS6rYYYwKpSJqqwJXApL9MqoxH2B8Hoo0BaG43/
3UlNi+yljvhBNiJnx2pAIdU+WaIL1ZQj9XzuU1sFSa8lnFNb2x+wkgjHzJ0Hdotm
zZqirCo1jyyNkyTwGfwJwGzNgZemQDMQ7cr2MYzG1mhFMLEZZJeFmWVzfuzJ3yoR
jke/Hy/qiWVK0en43MdR
=qnz2
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-3.16-rc1' of git://oss.sgi.com/xfs/xfs
Pull xfs updates from Dave Chinner:
"This update contains:
- cleanup removing unused function args
- rework of the filestreams allocator to use dentry cache parent
lookups
- new on-disk free inode btree and optimised inode allocator
- various bug fixes
- rework of internal attribute API
- cleanup of superblock feature bit support to remove historic cruft
- more fixes and minor cleanups
- added a new directory/attribute geometry abstraction
- yet more fixes and minor cleanups"
* tag 'xfs-for-linus-3.16-rc1' of git://oss.sgi.com/xfs/xfs: (86 commits)
xfs: fix xfs_da_args sparse warning in xfs_readdir
xfs: Fix rounding in xfs_alloc_fix_len()
xfs: tone down writepage/releasepage WARN_ONs
xfs: small cleanup in xfs_lowbit64()
xfs: kill xfs_buf_geterror()
xfs: xfs_readsb needs to check for magic numbers
xfs: block allocation work needs to be kswapd aware
xfs: remove redundant geometry information from xfs_da_state
xfs: replace attr LBSIZE with xfs_da_geometry
xfs: pass xfs_da_args to xfs_attr_leaf_newentsize
xfs: use xfs_da_geometry for block size in attr code
xfs: remove mp->m_dir_geo from directory logging
xfs: reduce direct usage of mp->m_dir_geo
xfs: move node entry counts to xfs_da_geometry
xfs: convert dir/attr btree threshold to xfs_da_geometry
xfs: convert m_dirblksize to xfs_da_geometry
xfs: convert m_dirblkfsbs to xfs_da_geometry
xfs: convert directory segment limits to xfs_da_geometry
xfs: convert directory db conversion to xfs_da_geometry
xfs: convert directory dablk conversion to xfs_da_geometry
...
Pull block layer fixes from Jens Axboe:
"Final small batch of fixes to be included before -rc1. Some general
cleanups in here as well, but some of the blk-mq fixes we need for the
NVMe conversion and/or scsi-mq. The pull request contains:
- Support for not merging across a specified "chunk size", if set by
the driver. Some NVMe devices perform poorly for IO that crosses
such a chunk, so we need to support it generically as part of
request merging avoid having to do complicated split logic. From
me.
- Bump max tag depth to 10Ki tags. Some scsi devices have a huge
shared tag space. Before we failed with EINVAL if a too large tag
depth was specified, now we truncate it and pass back the actual
value. From me.
- Various blk-mq rq init fixes from me and others.
- A fix for enter on a dying queue for blk-mq from Keith. This is
needed to prevent oopsing on hot device removal.
- Fixup for blk-mq timer addition from Ming Lei.
- Small round of performance fixes for mtip32xx from Sam Bradshaw.
- Minor stack leak fix from Rickard Strandqvist.
- Two __init annotations from Fabian Frederick"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: add __init to blkcg_policy_register
block: add __init to elv_register
block: ensure that bio_add_page() always accepts a page for an empty bio
blk-mq: add timer in blk_mq_start_request
blk-mq: always initialize request->start_time
block: blk-exec.c: Cleaning up local variable address returnd
mtip32xx: minor performance enhancements
blk-mq: ->timeout should be cleared in blk_mq_rq_ctx_init()
blk-mq: don't allow queue entering for a dying queue
blk-mq: bump max tag depth to 10K tags
block: add blk_rq_set_block_pc()
block: add notion of a chunk size for request merging
- refactor m25p80.c driver for use as a general SPI NOR framework for other
drivers which may speak to SPI NOR flash without providing full SPI support
(i.e., not part of drivers/spi/)
- new Freescale QuadSPI driver (utilizing new SPI NOR framework)
- updates for the STMicro "FSM" SPI NOR driver
- fix sync/flush behavior on mtd_blkdevs
- fixup subpage write support on a few NAND drivers
- correct the MTD OOB test for odd-sized OOB areas
- add BCH-16 support for OMAP NAND
- fix warnings and trivial refactoring
- utilize new ECC DT bindings in pxa3xx NAND driver
- new LPDDR NVM driver
- address a few assorted bugs caught by Coverity
- add new imx6sx support for GPMI NAND
- use a bounce buffer for NAND when non-DMA-able buffers are used
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6UIq
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20140610' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris:
- refactor m25p80.c driver for use as a general SPI NOR framework for
other drivers which may speak to SPI NOR flash without providing full
SPI support (i.e., not part of drivers/spi/)
- new Freescale QuadSPI driver (utilizing new SPI NOR framework)
- updates for the STMicro "FSM" SPI NOR driver
- fix sync/flush behavior on mtd_blkdevs
- fixup subpage write support on a few NAND drivers
- correct the MTD OOB test for odd-sized OOB areas
- add BCH-16 support for OMAP NAND
- fix warnings and trivial refactoring
- utilize new ECC DT bindings in pxa3xx NAND driver
- new LPDDR NVM driver
- address a few assorted bugs caught by Coverity
- add new imx6sx support for GPMI NAND
- use a bounce buffer for NAND when non-DMA-able buffers are used
* tag 'for-linus-20140610' of git://git.infradead.org/linux-mtd: (77 commits)
mtd: gpmi: add gpmi support for imx6sx
mtd: maps: remove check for CONFIG_MTD_SUPERH_RESERVE
mtd: bf5xx_nand: use the managed version of kzalloc
mtd: pxa3xx_nand: make the driver work on big-endian systems
mtd: nand: omap: fix omap_calculate_ecc_bch() for-loop error
mtd: nand: r852: correct write_buf loop bounds
mtd: nand_bbt: handle error case for nand_create_badblock_pattern()
mtd: nand_bbt: remove unused variable
mtd: maps: sc520cdp: fix warnings
mtd: slram: fix unused variable warning
mtd: pfow: remove unused variable
mtd: lpddr: fix Kconfig dependency, for I/O accessors
mtd: nand: pxa3xx: Add supported ECC strength and step size to the DT binding
mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding
mtd: nand: pxa3xx: Clean pxa_ecc_init() error handling
mtd: nand: Warn the user if the selected ECC strength is too weak
mtd: nand: omap: Documentation: How to select correct ECC scheme for your device ?
mtd: nand: omap: add support for BCH16_ECC - NAND driver updates
mtd: nand: omap: add support for BCH16_ECC - ELM driver updates
mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates
...
Mostly performance improvements with a few corner-case bug fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=MaM/
-----END PGP SIGNATURE-----
Merge tag 'md/3.16' of git://neil.brown.name/md
Pull md updates from Neil Brown:
"Assorted md fixes for 3.16
Mostly performance improvements with a few corner-case bug fixes"
* tag 'md/3.16' of git://neil.brown.name/md:
raid5: speedup sync_request processing
md/raid5: deadlock between retry_aligned_read with barrier io
raid5: add an option to avoid copy data from bio to stripe cache
md/bitmap: remove confusing code from filemap_get_page.
raid5: avoid release list until last reference of the stripe
md: md_clear_badblocks should return an error code on failure.
md/raid56: Don't perform reads to support writes until stripe is ready.
md: refuse to change shape of array if it is active but read-only
There was a bug in debug printout when CONFIG_REISERFS_CHECK was
enabled so one of the assertions in do_balan.c didn't compile. Fix it.
Fixes: 0080e9f9d3
Signed-off-by: Jan Kara <jack@suse.cz>
Pull watchdog updates from Wim Van Sebroeck:
"This contains:
- addition of the Intel MID watchdog
- removal of W83697HF and W83697UG drivers (code was merged into
w83627hf_wdt driver)
- addition of Armada 375/380 SoC support
- conversion of imx2_wdt to regmap API and to watchdog core API
- lots of other small improvements and fixes"
[ Wim was also tagged by gmail as a spammer, but not delayed by days
unlike Ben ]
* git://www.linux-watchdog.org/linux-watchdog: (25 commits)
x86: intel-mid: add watchdog platform code for Merrifield
watchdog: add Intel MID watchdog driver support
watchdog: sp805: Set watchdog_device->timeout from ->set_timeout()
booke/watchdog: refine and clean up the codes
watchdog: iop_wdt only builds for mach-iop13xx
watchdog: Remove drivers for W83697HF and W83697UG
watchdog: w83627hf_wdt: Add early_disable module parameter
ARM: mvebu: Add A375/A380 watchdog binding documentation
watchdog: orion: Add Armada 375/380 SoC support
watchdog: orion: Introduce per-SoC enabled() function
watchdog: orion: Introduce per-SoC stop() function
watchdog: orion: Remove unneeded atomic access
watchdog: orion: Introduce a SoC-specific RSTOUT mapping
watchdog: orion: Move the register ioremap'ing to its own function
watchdog: xilinx: Make of_device_id array const
watchdog: imx2_wdt: convert to watchdog core api
watchdog: imx2_wdt: convert to use regmap API.
watchdog: imx2_wdt: Sort the header files alphabetically
watchdog: ath79_wdt: switch to clk_prepare/clk_disable
watchdog: ath79_wdt: avoid spurious restarts on AR934x
...
Pull powerpc updates from Ben Herrenschmidt:
"Here is the bulk of the powerpc changes for this merge window. It got
a bit delayed in part because I wasn't paying attention, and in part
because I discovered I had a core PCI change without a PCI maintainer
ack in it. Bjorn eventually agreed it was ok to merge it though we'll
probably improve it later and I didn't want to rebase to add his ack.
There is going to be a bit more next week, essentially fixes that I
still want to sort through and test.
The biggest item this time is the support to build the ppc64 LE kernel
with our new v2 ABI. We previously supported v2 userspace but the
kernel itself was a tougher nut to crack. This is now sorted mostly
thanks to Anton and Rusty.
We also have a fairly big series from Cedric that add support for
64-bit LE zImage boot wrapper. This was made harder by the fact that
traditionally our zImage wrapper was always 32-bit, but our new LE
toolchains don't really support 32-bit anymore (it's somewhat there
but not really "supported") so we didn't want to rely on it. This
meant more churn that just endian fixes.
This brings some more LE bits as well, such as the ability to run in
LE mode without a hypervisor (ie. under OPAL firmware) by doing the
right OPAL call to reinitialize the CPU to take HV interrupts in the
right mode and the usual pile of endian fixes.
There's another series from Gavin adding EEH improvements (one day we
*will* have a release with less than 20 EEH patches, I promise!).
Another highlight is the support for the "Split core" functionality on
P8 by Michael. This allows a P8 core to be split into "sub cores" of
4 threads which allows the subcores to run different guests under KVM
(the HW still doesn't support a partition per thread).
And then the usual misc bits and fixes ..."
[ Further delayed by gmail deciding that BenH is a dirty spammer.
Google knows. ]
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (155 commits)
powerpc/powernv: Add missing include to LPC code
selftests/powerpc: Test the THP bug we fixed in the previous commit
powerpc/mm: Check paca psize is up to date for huge mappings
powerpc/powernv: Pass buffer size to OPAL validate flash call
powerpc/pseries: hcall functions are exported to modules, need _GLOBAL_TOC()
powerpc: Exported functions __clear_user and copy_page use r2 so need _GLOBAL_TOC()
powerpc/powernv: Set memory_block_size_bytes to 256MB
powerpc: Allow ppc_md platform hook to override memory_block_size_bytes
powerpc/powernv: Fix endian issues in memory error handling code
powerpc/eeh: Skip eeh sysfs when eeh is disabled
powerpc: 64bit sendfile is capped at 2GB
powerpc/powernv: Provide debugfs access to the LPC bus via OPAL
powerpc/serial: Use saner flags when creating legacy ports
powerpc: Add cpu family documentation
powerpc/xmon: Fix up xmon format strings
powerpc/powernv: Add calls to support little endian host
powerpc: Document sysfs DSCR interface
powerpc: Fix regression of per-CPU DSCR setting
powerpc: Split __SYSFS_SPRSETUP macro
arch: powerpc/fadump: Cleaning up inconsistent NULL checks
...
Pull x86 platform driver updates from Matthew Garrett:
"Very little of excitement here - the most significant is a new driver
for detecting device freefall on Dells, other than that it's pretty
much entirely minor fixes for specific machines"
* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
hp-wmi: Enable hotkeys on some systems
thinkpad_acpi: Add mappings for F9 - F12 hotkeys on X240 / T440 / T540
platform: x86: dell-smo8800: Dell Latitude freefall driver (ACPI SMO8800/SMO8810)
ideapad_laptop: Introduce the use of the managed version of kzalloc
platform/x86: Fix run-time dependencies of OLPC drivers
platform: x86: asus-wmi.c: Cleaning up uninitialized variables
ix86/mid/thermal: Introduce the use of the managed version of kzalloc
platform x86 Kconfig: Refer to the laptop list in the Compal driver help
Documentation: Add list of laptop models supported by the Compal driver
ideapad-laptop: Blacklist rfkill control on the Lenovo Yoga 2 11
asus-wmi: Set WAPF to 4 for Asus X550CA
alienware-wmi: For WMAX HDMI method, introduce a way to query HDMI cable status
alienware-wmi: Update WMAX brightness method limit to 15
pvpanic: Set high notifier priority
platform/x86: samsung-laptop: Add support for Samsung's NP7[34]0U3E models.
toshiba_acpi: Add alternative keymap support for Satellite M840
platform-drivers-x86: intel_pmic_gpio: Fix off-by-one valid offset range check
This is a third attempt to enable these buttons. The new variable being
commit 997daa1bd9 (i.e. hp-wmi: detect
"2009 BIOS or later"). Older systems that do not have the 2009 BIOS query
method respond with a dummy value, in this case 4. Using that, we can
target a fairly narrow group of systems. i.e. old enough to not have
HPWMI_FEATURE_QUERY 0xd, but new enough to have HPWMI_BIOS_QUERY 0x9.
This group may be further limited if some systems respond with something
other than 4 to non-existant feature queries.
Signed-off-by: Kyle Evans <kvans32@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The T440s user guide says that when Fn-lock is not active, the *40s' F9 - F12
keys should be mapped to: control-panel, search, show-all-windows and Computer.
These keys generate the sofar unused 28 - 31 hotkey scancodes.
For the first 2 this nicely matches the icons on the keys, for the latter 2
the icons are somewhat creative, which is why I ended up looking them up in
the user manual.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This acpi driver provide supports for freefall sensors SMO8800/SMO8810 which
can be found on Dell Latitude laptops. Driver register /dev/freefall misc
device which has same interface as driver hp_accel freefall driver. So any
existing applications for HP freefall sensor /dev/freefall will work for with
this new driver for Dell Latitude laptops too.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Cc: Sonal Santan <sonal.santan@gmail.com>
Tested-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This patch moves data allocated using kzalloc to managed data allocated
using devm_kzalloc and cleans now unnecessary kfrees in probe and remove
functions. The label sysfs_failed is removed as it is no longer
required. Also, linux/device.h is added to make sure the devm_*()
routine declarations are unambiguously available.
The following Coccinelle semantic patch was used for making the change:
@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
.probe = probefn,
.remove = removefn,
};
@prb@
identifier platform.probefn, pdev;
expression e, e1, e2;
@@
probefn(struct platform_device *pdev, ...) {
<+...
- e = kzalloc(e1, e2)
+ e = devm_kzalloc(&pdev->dev, e1, e2)
...
?-kfree(e);
...+>
}
@rem depends on prb@
identifier platform.removefn;
expression e;
@@
removefn(...) {
<...
- kfree(e);
...>
}
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Let the xo15-ebook driver depend on OLPC as all other OLPC drivers
already do. Add COMPILE_TEST as an alternative for both xo1-rfkill
and xo15-ebook, to increase the build testing coverage.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
There is a risk that the variable will be used without being initialized.
This was largely found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This patch moves data allocated using kzalloc to managed data allocated
using devm_kzalloc and cleans now unnecessary kfrees in probe and remove
functions.
The following Coccinelle semantic patch was used for making the change:
@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
.probe = probefn,
.remove = removefn,
};
@prb@
identifier platform.probefn, pdev;
expression e, e1, e2;
@@
probefn(struct platform_device *pdev, ...) {
<+...
- e = kzalloc(e1, e2)
+ e = devm_kzalloc(&pdev->dev, e1, e2)
...
?-kfree(e);
...+>
}
@rem depends on prb@
identifier platform.removefn;
expression e;
@@
removefn(...) {
<...
- kfree(e);
...>
}
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The Lenovo Yoga 2 11 always reports everything as blocked, causing userspace
to not even try to use the wlan / bluetooth even though they work fine.
Note this patch also removes the "else priv->rfk[i] = NULL;" bit of the
rfkill initialization, it is not necessary as the priv struct is allocated
with kzalloc.
Reported-and-tested-by: Vincent Gerris <vgerris@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The 'asus-nb-wmi' WAPF parameter must be set to 4, so the internal Wireless LAN device is operational.
Signed-off-by: Andreas Utterberg <andreas.utterberg@thundera.se>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Since there are now multiple HDMI attributes associated with the WMAX method,
create a sysfs group for them instead.
Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Merge leftovers from Andrew Morton:
"A few leftovers: ocfs2, gcov, RTC"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
rtc: s5m: consolidate two device type switch statements
rtc: s5m: add support for S2MPS14 RTC
rtc: s5m: support different register layout
rtc: s5m: use shorter time of register update
rtc: s5m: remove undocumented time init on first boot
mfd/rtc: sec/s5m: rename SEC* symbols to S5M
gcov: add support for GCC 4.9
ocfs2/o2net: incorrect to terminate accepting connections loop upon rejecting an invalid one
In probe the configuration of driver for different chipsets was done in
two switch (pdata->device_type) statements. Consolidate them into one
switch statement to increase code readability.
Additionally check the return value of regmap_irq_get_virq and exit
probe on error.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for S2MPS14 to the rtc-s5m driver. Differences in S2MPS14
(in comparison to S5M8767):
- Layout of registers
- Lack of century support for time and alarms (7 registers used for
storing time/alarm)
- Two buffer control registers: WUDR and RUDR
- No register for enabling writing time
- RTC interrupts are reported in main PMIC I2C device
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prepare for adding support for S2MPS14 RTC device to the rtc-s5m driver:
1. Add a map of registers used by the driver which differ between
the chipsets (S5M876X and S2MPS14).
2. Move code of checking for alarm pending to separate function.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Set the time needed for updating alarm and time registers to 0.45 ms.
The default is 7.32 ms which is too long and leads to warnings when
setting alarm or time:
s5m-rtc: waiting for UDR update, reached max number of retries
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the code for initializing time if this is first boot.
The code for detecting first boot uses undocumented field RTC_TCON in
RTC_UDR_CON register. According to S5M8767's datasheet this field is
reserved. On S2MPS14 it is not documented at all.
On device first boot the registers will be initialized with reset value
(2000-01-01 00:00:00).
The code might work on S5M8763 but still this does not look like a task
for RTC driver.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prepare for adding support for S2MPS14 RTC device to the rtc-s5m driver:
1. Rename SEC* symbols to S5M.
2. Add S5M prefix to some of defines which are different between S5M876X
and S2MPS14.
This is only a rename-like patch, new code is not added.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch handles the gcov-related changes in GCC 4.9:
A new counter (time profile) is added. The total number is 9 now.
A new profile merge function __gcov_merge_time_profile is added.
See gcc/gcov-io.h and libgcc/libgcov-merge.c
For the first change, the layout of struct gcov_info is affected.
For the second one, a dummy function is added to kernel/gcov/base.c
similarly.
Signed-off-by: Yuan Pengfei <coolypf@qq.com>
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When o2net-accept-one() rejects an illegal connection, it terminates the
loop picking up the remaining queued connections. This fix will
continue accepting connections till the queue is emtpy.
Addresses Orabug 17489469.
Signed-off-by: Tariq Saseed <tariq.x.saeed@oracle.com>
Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Right now when people try to report issues in the kernel they send stack
dumps to eachother, which looks something like this:
[ 6.906437] [<ffffffff811f0e90>] ? backtrace_test_irq_callback+0x20/0x20
[ 6.907121] [<ffffffff84388ce8>] dump_stack+0x52/0x7f
[ 6.907640] [<ffffffff811f0ec8>] backtrace_regression_test+0x38/0x110
[ 6.908281] [<ffffffff813596a0>] ? proc_create_data+0xa0/0xd0
[ 6.908870] [<ffffffff870a8040>] ? proc_modules_init+0x22/0x22
[ 6.909480] [<ffffffff810020c2>] do_one_initcall+0xc2/0x1e0
[...]
However, most of the text you get is pure garbage.
The only useful thing above is the function name. Due to the amount of
different kernel code versions and various configurations being used,
the kernel address and the offset into the function are not really
helpful in determining where the problem actually occured.
Too often the result of someone looking at a stack dump is asking the
person who sent it for a translation for one or more 'addr2line'
translations. Which slows down the entire process of debugging the
issue (and really annoying).
The decode_stacktrace script is an attempt to make the output more
useful and easy to work with by translating all kernel addresses in the
stack dump into line numbers. Which means that the stack dump would
look like this:
[ 635.148361] dump_stack (lib/dump_stack.c:52)
[ 635.149127] warn_slowpath_common (kernel/panic.c:418)
[ 635.150214] warn_slowpath_null (kernel/panic.c:453)
[ 635.151031] _oalloc_pages_slowpath+0x6a/0x7d0
[ 635.152171] ? zone_watermark_ok (mm/page_alloc.c:1728)
[ 635.152988] ? get_page_from_freelist (mm/page_alloc.c:1939)
[ 635.154766] __alloc_pages_nodemask (mm/page_alloc.c:2766)
It's pretty obvious why this is better than the previous stack dump
before.
Usage is pretty simple:
./decode_stacktrace.sh [vmlinux] [base path]
Where vmlinux is the vmlinux to extract line numbers from and base path
is the path that points to the root of the build tree, for example:
./decode_stacktrace.sh vmlinux /home/sasha/linux/ < input.log > output.log
The stack trace should be piped through it (I, for example, just pipe
the output of the serial console of my KVM test box through it).
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Highlights include:
- Massive cleanup of the NFS read/write code by Anna and Dros
- Support multiple NFS read/write requests per page in order to deal with
non-page aligned pNFS striping. Also cleans up the r/wsize < page size
code nicely.
- stable fix for ensuring inode is declared uptodate only after all the
attributes have been checked.
- stable fix for a kernel Oops when remounting
- NFS over RDMA client fixes
- move the pNFS files layout driver into its own subdirectory
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OyXR
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
- massive cleanup of the NFS read/write code by Anna and Dros
- support multiple NFS read/write requests per page in order to deal
with non-page aligned pNFS striping. Also cleans up the r/wsize <
page size code nicely.
- stable fix for ensuring inode is declared uptodate only after all
the attributes have been checked.
- stable fix for a kernel Oops when remounting
- NFS over RDMA client fixes
- move the pNFS files layout driver into its own subdirectory"
* tag 'nfs-for-3.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits)
NFS: populate ->net in mount data when remounting
pnfs: fix lockup caused by pnfs_generic_pg_test
NFSv4.1: Fix typo in dprintk
NFSv4.1: Comment is now wrong and redundant to code
NFS: Use raw_write_seqcount_begin/end int nfs4_reclaim_open_state
xprtrdma: Disconnect on registration failure
xprtrdma: Remove BUG_ON() call sites
xprtrdma: Avoid deadlock when credit window is reset
SUNRPC: Move congestion window constants to header file
xprtrdma: Reset connection timeout after successful reconnect
xprtrdma: Use macros for reconnection timeout constants
xprtrdma: Allocate missing pagelist
xprtrdma: Remove Tavor MTU setting
xprtrdma: Ensure ia->ri_id->qp is not NULL when reconnecting
xprtrdma: Reduce the number of hardway buffer allocations
xprtrdma: Limit work done by completion handler
xprtrmda: Reduce calls to ib_poll_cq() in completion handlers
xprtrmda: Reduce lock contention in completion handlers
xprtrdma: Split the completion queue
xprtrdma: Make rpcrdma_ep_destroy() return void
...
Core:
- support HS400 mode of eMMC 5.0, via DT bindings mmc-hs400-1_{2,8}v
- if card init at 3.3v doesn't work, try 1.8v and 1.2v too
Drivers:
- moxart: New driver for MOXA ART SoCs
- rtsx_usb_sdmmc: New driver for Realtek USB card readers
- sdhci: Large rework around IRQ/regulator handling, remove card_tasklet
- sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
- sunxi: New driver for Allwinner sunxi SoCs
- usdhi6rol0: New driver for Renesas SD/SDIO controller
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OZao
-----END PGP SIGNATURE-----
Merge tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Pull MMC update from Chris Ball:
"MMC highlights for 3.16:
Core:
- support HS400 mode of eMMC 5.0, via DT bindings mmc-hs400-1_{2,8}v
- if card init at 3.3v doesn't work, try 1.8v and 1.2v too
Drivers:
- moxart: New driver for MOXA ART SoCs
- rtsx_usb_sdmmc: New driver for Realtek USB card readers
- sdhci: Large rework around IRQ/regulator handling, remove card_tasklet
- sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
- sunxi: New driver for Allwinner sunxi SoCs
- usdhi6rol0: New driver for Renesas SD/SDIO controller"
* tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (95 commits)
mmc: sdhci-s3c: use mmc_of_parse and remove the card_tasklet
mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller
mmc: sdhci-of-esdhc: Fixup compile error
mmc: tegra: fix reporting of base clock frequency
mmc: tegra: disable UHS modes
mmc: sdhci-dove: use mmc_of_parse() and remove card_tasklet CD handler
MAINTAINERS: mmc: Add path to git tree
mmc: dove: fix missing MACH_DOVE dependency
mmc: sdhci: SD tuning is broken for some controllers
mmc: sdhci-esdhc-imx: fix mmc ddr mode regression issue
mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
mmc: omap_hsmmc: split omap-dma header file
mmc: omap_hsmmc: fix cmd23 multiblock read/write
mmc: omap_hsmmc: use devm_ioremap_resource
mmc: omap_hsmmc: use devm_request_threaded_irq
mmc: omap_hsmmc: use devm_request_irq
mmc: omap_hsmmc: use devm_clk_get
mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs
mmc: wmt-sdmmc: Use GFP_KERNEL instead of hard-coded value
mmc: omap: Use DIV_ROUND_UP instead of open coded
...
The kernel has no concept of capabilities with respect to inodes; inodes
exist independently of namespaces. For example, inode_capable(inode,
CAP_LINUX_IMMUTABLE) would be nonsense.
This patch changes inode_capable to check for uid and gid mappings and
renames it to capable_wrt_inode_uidgid, which should make it more
obvious what it does.
Fixes CVE-2014-4014.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds platform code for Intel Merrifield.
Since the watchdog is not part of SFI table, we have no other option but
to manually register watchdog's platform device (argh!).
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Add initial Intel MID watchdog driver support.
This driver is an initial implementation of generic Intel MID watchdog
driver. Currently it supports Intel Merrifield platform.
Signed-off-by: Eric Ernst <eric.ernst@intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Implementation of ->set_timeout() is supposed to set 'timeout' field of 'struct
watchdog_device' passed to it. sp805 was rather setting this in a local
variable. Fix it.
Reported-by: Arun Ramamurthy <arun.ramamurthy@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: <stable@vger.kernel.org> # 2.6.36+
Basically, this patch does the following:
1. Move the codes of parsing boot parameters from setup-common.c
to driver. In this way, code reader can know directly that
there are boot parameters that can change the timeout.
2. Make boot parameter 'booke_wdt_period' effective.
currently, when driver is loaded, default timeout is always
being used in stead of booke_wdt_period.
3. Wrap up the watchdog timeout in device struct and clean up
unnecessary codes.
Signed-off-by: Tang Yuantian <yuantian.tang@freescale.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: Li Yang <leoli@freescale.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
