btree_deadlock_to_text() searches the list of btree transactions to find
a deadlock - when it finds one it's done; it's not like other *_read()
functions that's printing each object.
Factor out btree_deadlock_to_text() to make this clearer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We were grabbing the sequence number before unlock incremented it - fix
this by moving the increment to seqmutex_lock() (so the seqmutex_relock()
failure path skips the mutex_trylock()), and returning the sequence
number from unlock(), to make the API simpler and safer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
`inode->ei_flags` setting and cleaning should be done after initialization,
otherwise the operation is invalid.
Fixes: 9ca4853b98 ("bcachefs: Fix quota support for snapshots")
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
write_super() may reallocate the superblock buffer - but
bch_sb_field_ext was referencing it; don't use it after the write_super
call.
Reported-by: syzbot+8992fc10a192067b8d8a@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
printk strings get truncated to 1024 bytes; if we have a long error
message (journal debug info) we need to use a helper.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
discard_new_inode() is the correct interface for tearing down an indoe
that was fully created but not made visible to other threads, but it
expects I_NEW to be set, which we don't use.
Reported-by: https://github.com/koverstreet/bcachefs/issues/690
Fixes: bcachefs: Fix race path in bch2_inode_insert()
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Incorrect bucket state transition in the discard path; when incrementing
a bucket's generation number that had already been discarded, we were
forgetting to check if it should be need_gc_gens, not free.
This was caught by the .invalid checks in the transaction commit path,
causing us to go emergency read only.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
With CONFIG_READ_ONLY_THP_FOR_FS, the Linux kernel supports using THPs
for read-only mmapped files, such as shared libraries. However, the
kernel makes no attempt to actually align those mappings on 2MB
boundaries, which makes it impossible to use those THPs most of the
time. This issue applies to general file mapping THP as well as
existing setups using CONFIG_READ_ONLY_THP_FOR_FS. This is easily
fixed by using thp_get_unmapped_area for the unmapped_area function
in bcachefs, which is what ext2, ext4, fuse, xfs and btrfs all use.
Similar to commit b0c582233a ("btrfs: fix alignment of VMA for
memory mapped files on THP").
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
i.e. the start of automatic self healing:
If errors=continue or fix_safe, we now automatically fix simple errors
without user intervention.
New error action option: fix_safe
This replaces the existing errors=ro option, which gets a new slot, i.e.
existing errors=ro users now get errors=fix_safe.
This is currently only enabled for a limited set of errors - initially
just disk accounting; errors we would never not want to fix, and we
don't want to require user intervention (i.e. to make sure a bug report
gets filed).
Errors will still be counted in the superblock, so we (developers) will
still know they've been occuring if a bug report gets filed (as bug
reports typically include the errors superblock section).
Eventually we'll be enabling this for a much wider set of errors, after
we've done thorough error injection testing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
reference: https://github.com/koverstreet/bcachefs/issues/692
trans->ref is the reference used by the cycle detector, which walks
btree_trans objects of other threads to walk the graph of held locks and
issue wakeups when an abort is required.
We have to wait for the ref to go to 1 before freeing trans->paths or
clearing trans->locking_wait.task.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
LRUs only have 48 bits for the time field (i.e. LRU order); thus we need
overflow checks and guards.
Reported-by: syzbot+df3bf3f088dcaa728857@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We've been moving away from going RW lazily; if we want to go RW we do
that in set_may_go_rw(), and if we didn't go RW we don't need to delete
dead snapshots.
Reported-by: syzbot+4366624c0b5aac4906cf@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We shouln't be running the journal shutdown sequence if we never fully
initialized the journal.
Reported-by: syzbot+ffd2270f0bca3322ee00@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We can only handle btree IDs up to 62, since the btree id (plus the type
for interior btree nodes) has to fit ito a 64 bit bitmask - check for
invalid ones to avoid invalid shifts later.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We can't discard a bucket while it's still open; this needs the
bucket_is_open_safe() version, which takes the open_buckets lock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We use 0 size arrays as markers, but ubsan doesn't know that - cast them
to a pointer to fix the splat.
Also, make sure this code gets tested a bit more.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
btree_iter_init() needs to happen before key_cache_init(), to initialize
btree_trans_barrier
Reported-by: syzbot+3cca837c2183f8f6fcaf@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
One patch from John David Anglin which reworks the parisc cache flushing
routines with the aim to fix the random segmentation faults on machines with
PA8800 and PA8900 processors. We have faced those segfaults since many years,
but with this patch no single segfault could be triggered any longer. The
patch was tested by 3 people on 5 different machines with various stable
kernels (6.6, 6.8 and 6.9).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZm7t1gAKCRD3ErUQojoP
X5KaAQCNbzn2jRVOJnWS2MaoMXikDOT1Mc45++M/BQVKFCd0EAEAhGvLFlmwJA6X
h03pyiJ08/8dga/qCBgP8sAEucNP8Ag=
=r3iu
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fix from Helge Deller:
"On parisc we have suffered since years from random segfaults which
seem to have been triggered due to cache inconsistencies. Those
segfaults happened more often on machines with PA8800 and PA8900 CPUs,
which have much bigger caches than the earlier machines.
Dave Anglin has worked over the last few weeks to fix this bug. His
patch has been successfully tested by various people on various
machines and with various kernels (6.6, 6.8 and 6.9), and the debian
buildd servers haven't shown a single random segfault with this patch.
Since the cache handling has been reworked, the patch is slightly
bigger than I would like in this stage, but the greatly improved
stability IMHO justifies the inclusion now"
* tag 'parisc-for-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Try to fix random segmentation faults in package builds
-----BEGIN PGP SIGNATURE-----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=ORm4
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two fixes to correctly report i2c functionality, ensuring that
I2C_FUNC_SLAVE is reported when a device operates solely as a slave
interface"
* tag 'i2c-for-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: designware: Fix the functionality flags of the slave-only interface
i2c: at91: Fix the functionality flags of the slave-only interface
Here are some small USB and Thunderbolt driver fixes for 6.10-rc4.
Included in here are:
- thunderbolt debugfs bugfix
- USB typec bugfixes
- kcov usb bugfix
- xhci bugfixes
- usb-storage bugfix
- dt-bindings bugfix
- cdc-wdm log message spam bugfix
All of these, except for the last cdc-wdm log level change, have been in
linux-next for a while with no reported problems. The cdc-wdm bugfix
has been tested by syzbot and proved to fix the reported cpu lockup
issues when the log is constantly spammed by a broken device.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZm68wA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylZmgCfeRfuQkFXgRs1LYZ8x2g2FfHmxFgAoJe+2RAW
yR6Lp2bPhH+YQS3rhjNL
=hNwg
-----END PGP SIGNATURE-----
Merge tag 'usb-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.10-rc4.
Included in here are:
- thunderbolt debugfs bugfix
- USB typec bugfixes
- kcov usb bugfix
- xhci bugfixes
- usb-storage bugfix
- dt-bindings bugfix
- cdc-wdm log message spam bugfix
All of these, except for the last cdc-wdm log level change, have been
in linux-next for a while with no reported problems. The cdc-wdm
bugfix has been tested by syzbot and proved to fix the reported cpu
lockup issues when the log is constantly spammed by a broken device"
* tag 'usb-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages
xhci: Handle TD clearing for multiple streams case
xhci: Apply broken streams quirk to Etron EJ188 xHCI host
xhci: Apply reset resume quirk to Etron EJ188 xHCI host
xhci: Set correct transferred length for cancelled bulk transfers
usb-storage: alauda: Check whether the media is initialized
usb: typec: ucsi: Ack also failed Get Error commands
kcov, usb: disable interrupts in kcov_remote_start_usb_softirq
dt-bindings: usb: realtek,rts5411: Add missing "additionalProperties" on child nodes
usb: typec: tcpm: Ignore received Hard Reset in TOGGLING state
usb: typec: tcpm: fix use-after-free case in tcpm_register_source_caps
USB: xen-hcd: Traverse host/ when CONFIG_USB_XEN_HCD is selected
usb: typec: ucsi: glink: increase max ports for x1e80100
Revert "usb: chipidea: move ci_ulpi_init after the phy initialization"
thunderbolt: debugfs: Fix margin debugfs node creation condition
Here are some small tty and serial driver fixes that resolve som
reported problems. Included in here are:
- n_tty lookahead buffer bugfix
- WARN_ON() removal where it was not needed
- 8250_dw driver bugfixes
- 8250_pxa bugfix
- sc16is7xx Kconfig fixes for reported build issues
All of these have been in linux-next for over a week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZm6+jQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl/xwCgjLYn51rN/qHGGCy7db5/+B+EeiEAoNXP9BGV
6EmNQc5A9V2Ze+I6xSsE
=aEiP
-----END PGP SIGNATURE-----
Merge tag 'tty-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes that resolve som
reported problems. Included in here are:
- n_tty lookahead buffer bugfix
- WARN_ON() removal where it was not needed
- 8250_dw driver bugfixes
- 8250_pxa bugfix
- sc16is7xx Kconfig fixes for reported build issues
All of these have been in linux-next for over a week with no reported
problems"
* tag 'tty-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: drop debugging WARN_ON_ONCE() from uart_write()
serial: sc16is7xx: re-add Kconfig SPI or I2C dependency
serial: sc16is7xx: rename Kconfig CONFIG_SERIAL_SC16IS7XX_CORE
serial: port: Don't block system suspend even if bytes are left to xmit
serial: 8250_pxa: Configure tx_loadsz to match FIFO IRQ level
serial: 8250_dw: Revert "Move definitions to the shared header"
serial: 8250_dw: Don't use struct dw8250_data outside of 8250_dw
tty: n_tty: Fix buffer offsets when lookahead is used
Here is a single staging driver fix, for the vc04 driver, for 6.10-rc4.
It resolves a reported problem that showed up in the 6.10-rc1 set of
changes.
It's been in linux-next for over a week with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZm6/6g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym++gCgnzk1zAAj6w5zLYVl4ANqfKgQFr8An35ZOsYh
trI5UWbK82fO94uH1jQA
=7bMb
-----END PGP SIGNATURE-----
Merge tag 'staging-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix, for the vc04 driver. It resolves
a reported problem that showed up in the merge window set of changes.
It's been in linux-next for over a week with no reported problems"
* tag 'staging-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_debugfs: Fix NPD in vchiq_dump_state
Here are 3 small changes for 6.10-rc4 that resolve reported problems,
and finally drop an unused api call. These are:
- removal of devm_device_add_groups(), all the callers of this are
finally gone after the 6.10-rc1 merge (changes came in through
different trees), so it's safe to remove.
- much reported sysfs build error fixed up for systems that did not
have sysfs enabled
- driver core sync issue fix for a many reported issue over the years
that no one really paid much attention to, until Dirk finally
tracked down the real issue and made the "obviously correct and
simple" fix for it.
All of these have been in linux-next for over a week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZm7A2w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykqCwCgxcSy9dsZPvXLjIUGWlT7pJk6a4MAoMUlXWF5
vjwwgsA0XOOaWxQc9XhT
=AM42
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and sysfs fixes from Greg KH:
"Here are three small changes for 6.10-rc4 that resolve reported
problems, and finally drop an unused api call. These are:
- removal of devm_device_add_groups(), all the callers of this are
finally gone after the 6.10-rc1 merge (changes came in through
different trees), so it's safe to remove.
- much reported sysfs build error fixed up for systems that did not
have sysfs enabled
- driver core sync issue fix for a many reported issue over the years
that no one really paid much attention to, until Dirk finally
tracked down the real issue and made the "obviously correct and
simple" fix for it.
All of these have been in linux-next for over a week with no reported
problems"
* tag 'driver-core-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: core: synchronize really_probe() and dev_uevent()
sysfs: Unbreak the build around sysfs_bin_attr_simple_read()
driver core: remove devm_device_add_groups()
Here are a number of small char/misc and iio driver fixes for 6.10-rc4.
Included in here are the following:
- iio driver fixes for a bunch of reported problems.
- mei driver fixes for a number of reported issues.
- amiga parport driver build fix.
- .editorconfig fix that was causing lots of unintended whitespace
changes to happen to files when they were being edited. Unless we
want to sweep the whole tree and remove all trailing whitespace at
once, this is needed for the .editorconfig file to be able to be
used at all. This change is required because the original
submitters never touched older files in the tree.
- jfs bugfix for a buffer overflow
The jfs bugfix is in here as I didn't know where else to put it, and
it's been ignored for a while as the filesystem seems to be abandoned
and I'm tired of seeing the same issue reported in multiple places.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZm7C7A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymdEACfcZAcnD6Z7WAcTJ7GfFfNT9ph0+EAnAtQUO8j
CxuaurBncWfcNeHkaYbB
=Px6n
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of small char/misc and iio driver fixes for
6.10-rc4. Included in here are the following:
- iio driver fixes for a bunch of reported problems.
- mei driver fixes for a number of reported issues.
- amiga parport driver build fix.
- .editorconfig fix that was causing lots of unintended whitespace
changes to happen to files when they were being edited. Unless we
want to sweep the whole tree and remove all trailing whitespace at
once, this is needed for the .editorconfig file to be able to be
used at all. This change is required because the original
submitters never touched older files in the tree.
- jfs bugfix for a buffer overflow
The jfs bugfix is in here as I didn't know where else to put it, and
it's been ignored for a while as the filesystem seems to be abandoned
and I'm tired of seeing the same issue reported in multiple places.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (25 commits)
.editorconfig: remove trim_trailing_whitespace option
jfs: xattr: fix buffer overflow for invalid xattr
misc: microchip: pci1xxxx: Fix a memory leak in the error handling of gp_aux_bus_probe()
misc: microchip: pci1xxxx: fix double free in the error handling of gp_aux_bus_probe()
parport: amiga: Mark driver struct with __refdata to prevent section mismatch
mei: vsc: Fix wrong invocation of ACPI SID method
mei: vsc: Don't stop/restart mei device during system suspend/resume
mei: me: release irq in mei_me_pci_resume error path
mei: demote client disconnect warning on suspend to debug
iio: inkern: fix channel read regression
iio: imu: inv_mpu6050: stabilized timestamping in interrupt
iio: adc: ad7173: Fix sampling frequency setting
iio: adc: ad7173: Clear append status bit
iio: imu: inv_icm42600: delete unneeded update watermark call
iio: imu: inv_icm42600: stabilized timestamp in interrupt
iio: invensense: fix odr switching to same value
iio: adc: ad7173: Remove index from temp channel
iio: adc: ad7173: Add ad7173_device_info names
iio: adc: ad7173: fix buffers enablement for ad7176-2
iio: temperature: mlx90635: Fix ERR_PTR dereference in mlx90635_probe()
...
- Fix a bug where the SCSI Removable Media Bit (RMB) was incorrectly set
for hot-plug capable (and eSATA) ports. The RMB bit means that the
media is removable (e.g. floppy or CD-ROM), not that the device server
is removable. If the RMB bit is set, SCSI will set the removable media
sysfs attribute.
If the removable media sysfs attribute is set on a device, GNOME/udisks
will automatically mount the device on boot.
We only want to set the SCSI RMB bit (and thus the removable media
sysfs attribute) for devices where the ATA removable media device bit
is set.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCZm6u6AAKCRDJZDGjmcZN
cuyRAP42njwfV/t9IK6cAqUG15v4keX2AN9PDHvZNhn0QeJ7cwEA9bXu7OPjGsFk
1J6jWbxmgSNk0RC9HNXQ4wFlFz+JJgk=
=4VB1
-----END PGP SIGNATURE-----
Merge tag 'ata-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
"Fix a bug where the SCSI Removable Media Bit (RMB) was incorrectly set
for hot-plug capable (and eSATA) ports.
The RMB bit means that the media is removable (e.g. floppy or CD-ROM),
not that the device server is removable. If the RMB bit is set, SCSI
will set the removable media sysfs attribute.
If the removable media sysfs attribute is set on a device,
GNOME/udisks will automatically mount the device on boot.
We only want to set the SCSI RMB bit (and thus the removable media
sysfs attribute) for devices where the ATA removable media device bit
is set"
* tag 'ata-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-scsi: Set the RMB bit only for removable media devices
-----BEGIN PGP SIGNATURE-----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=cZJt
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v6.10_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Fix two issues with MI300 address translation logic
* tag 'edac_urgent_for_v6.10_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
RAS/AMD/ATL: Use system settings for MI300 DRAM to normalized address translation
RAS/AMD/ATL: Fix MI300 bank hash
- Update tracepoints events introduced in v6.10-rc1 so that it includes the
numeric identifier of host card in which the event happens.
- replace wiki URL with the current website URL in Kconfig
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZm1CswAKCRCsLtaWM8Lw
ExhaAQCu+YeWgrb6eg1ngZVvFYz03xfrItwQrfVBmifNo3PpxAD/azbA7HbquaC+
cueCZmjqxk9SLu4FnrZpExFtQjfvGA4=
=3X30
-----END PGP SIGNATURE-----
Merge tag 'firewire-fixes-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
- Update tracepoints events introduced in v6.10-rc1 so that it includes
the numeric identifier of host card in which the event happens
- replace wiki URL with the current website URL in Kconfig
* tag 'firewire-fixes-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: record card index in bus_reset_handle tracepoints event
firewire: core: record card index in tracepoinrts events derived from bus_reset_arrange_template
firewire: core: record card index in async_phy_inbound tracepoints event
firewire: core: record card index in async_phy_outbound_complete tracepoints event
firewire: core: record card index in async_phy_outbound_initiate tracepoints event
firewire: core: record card index in tracepoinrts events derived from async_inbound_template
firewire: core: record card index in tracepoinrts events derived from async_outbound_initiate_template
firewire: core: record card index in tracepoinrts events derived from async_outbound_complete_template
firewire: fix website URL in Kconfig
Commit 66601a29bb ("leds: class: If no default trigger is given, make
hw_control trigger the default trigger") causes ledtrig-netdev to get
set as default trigger on various network LEDs.
This causes users to hit a pre-existing AB-BA deadlock issue in
ledtrig-netdev between the LED-trigger locks and the rtnl mutex,
resulting in hung tasks in kernels >= 6.9.
Solving the deadlock is non trivial, so for now revert the change to
set the hw_control trigger as default trigger, so that ledtrig-netdev
no longer gets activated automatically for various network LEDs.
The netdev trigger is not needed because the network LEDs are usually under
hw-control and the netdev trigger tries to leave things that way so setting
it as the active trigger for the LED class device is a no-op.
Fixes: 66601a29bb ("leds: class: If no default trigger is given, make hw_control trigger the default trigger")
Reported-by: Genes Lists <lists@sapience.com>
Closes: https://lore.kernel.org/all/9d189ec329cfe68ed68699f314e191a10d4b5eda.camel@sapience.com/
Reported-by: Johannes Wüller <johanneswueller@gmail.com>
Closes: https://lore.kernel.org/lkml/e441605c-eaf2-4c2d-872b-d8e541f4cf60@gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
specifically ensuring that I2C_FUNC_SLAVE is reported when a
device operates solely as a slave interface.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCZmwimhYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1uOLEA/AuwGjBQT+R3rtW4Rm2TEvbORBTJ
7J0946wYpYrMi8zcAP0e/f1Or4ih6BXKUK2zztHa5duPfCyaajBvA+ynbyMKDw==
=sDff
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-fixes-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
Two fixes from Jean aim to correctly report i2c functionality,
specifically ensuring that I2C_FUNC_SLAVE is reported when a
device operates solely as a slave interface.
The currently used normalized address format is not applicable to all
MI300 systems. This leads to incorrect results during address
translation.
Drop the fixed layout and construct the normalized address from system
settings.
Fixes: 87a6123753 ("RAS/AMD/ATL: Add MI300 DRAM to normalized address translation support")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240607-mi300-dram-xl-fix-v1-2-2f11547a178c@amd.com
* Ensure xfs incore superblock's
1. Allocated inode counter
2. Free inode counter
3. Free data block counter
are zero or positive when they are copied over from
xfs_mount->m_[icount,ifree,fdblocks] respectively.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZm20zAAKCRAH7y4RirJu
9KU+AQDbXY06rXotcoDqALGSKoGZddBnfJMhOiFgOzNDJ+Cy7AEAieixGN2COKoV
Xa3TzIO6fb0mbNg7RDySY6XideiJ7Qw=
=xnum
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.10-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Chandan Babu:
"Ensure xfs incore superblock's allocated inode counter, free inode
counter, and free data block counter are all zero or positive when
they are copied over from xfs_mount->m_[icount,ifree,fdblocks]
respectively"
* tag 'xfs-6.10-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: make sure sb_fdblocks is non-negative
-----BEGIN PGP SIGNATURE-----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=6H3L
-----END PGP SIGNATURE-----
Merge tag '6.10-rc3-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"Two small smb3 server fixes:
- set xatttr fix
- pathname parsing check fix"
* tag '6.10-rc3-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix missing use of get_write in in smb2_set_ea()
ksmbd: move leading slash check to smb2_get_name()
The bus reset event occurs in the bus managed by one of 1394 OHCI
controller in Linux system, however the existing tracepoints events has
the lack of data about it to distinguish the issued hardware from the
others.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/20240613131440.431766-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The asynchronous transmission of phy packet is initiated on one of 1394
OHCI controller, however the existing tracepoints events has the lack of
data about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/20240613131440.431766-8-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The asynchronous transmission of phy packet is initiated on one of 1394
OHCI controller, however the existing tracepoints events has the lack of
data about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/20240613131440.431766-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The asynchronous transmission of phy packet is initiated on one of 1394
OHCI controller, however the existing tracepoints events has the lack of
data about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/20240613131440.431766-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The asynchronous transaction is initiated on one of 1394 OHCI
controller, however the existing tracepoints events has the lack of data
about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/20240613131440.431766-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The asynchronous transaction is initiated on one of 1394 OHCI controller,
however the existing tracepoints events has the lack of data about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/20240613131440.431766-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The asynchronous transaction is initiated on one of 1394 OHCI controller,
however the existing tracepoints events has the lack of data about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/20240613131440.431766-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
