Pull ARM fixes from Russell King:
"A couple more fixes for 4.10:
- fix addressing the short regset write issue (Dave Martin)
- fix for LPAE systems which leave a pending imprecise data abort
before entering the kernel (Alexander Sverdlin)"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8643/3: arm/ptrace: Preserve previous registers for short regset write
ARM: 8642/1: LPAE: catch pending imprecise abort on unmask
SMBSLVCNT must be protected with the piix4_mutex_sb800 in order to avoid
multiple buses accessing to the semaphore at the same time.
Fixes: 701dc207bf ("i2c: piix4: Avoid race conditions with IMC")
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Since '701dc207bf55 ("i2c: piix4: Avoid race conditions with IMC")' we
are using the SMBSLVCNT register at offset 0x8. We need to request it.
Fixes: 701dc207bf ("i2c: piix4: Avoid race conditions with IMC")
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Without this change, the HDMI/DP codec will be recognised as a
generic codec, and there is no sound when playing through this codec.
As suggested by NVidia side, after adding the new ID in the driver,
the sound playing works well.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Otherwise KVM will fail to pass them through to the host
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The IPIs come in as HVI not EE, so we need to test the appropriate
SRR1 bits. The encoding is such that it won't have false positives
on P7 and P8 so we can just test it like that. We also need to handle
the icp-opal variant of the flush.
Fixes: d74361881f ("powerpc/xics: Add ICP OPAL backend")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Three tiny changes to the ERAT flushing logic: First don't make
it depend on DD1. It hasn't been decided yet but we might run
DD2 in a mode that also requires explicit flushes for performance
reasons so make it unconditional. We also add a missing isync, and
finally remove the flush from _tlbiel_va as it is only necessary
for congruence-class invalidations (PID, LPID and full TLB), not
targetted invalidations.
Fixes: 96ed1fe511 ("powerpc/mm/radix: Invalidate ERAT on tlbiel for POWER9 DD1")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This reverts commit 020eb3daab.
Gabriel C reports that it causes his machine to not boot, and we haven't
tracked down the reason for it yet. Since the bug it fixes has been
around for a longish time, we're better off reverting the fix for now.
Gabriel says:
"It hangs early and freezes with a lot RCU warnings.
I bisected it down to :
> Ruslan Ruslichenko (1):
> x86/ioapic: Restore IO-APIC irq_chip retrigger callback
Reverting this one fixes the problem for me..
The box is a PRIMERGY TX200 S5 , 2 socket , 2 x E5520 CPU(s) installed"
and Ruslan and Thomas are currently stumped.
Reported-and-bisected-by: Gabriel C <nix.or.die@gmail.com>
Cc: Ruslan Ruslichenko <rruslich@cisco.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org # for the backport of the original commit
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge fixes from Andrew Morton:
"4 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/slub.c: fix random_seq offset destruction
cpumask: use nr_cpumask_bits for parsing functions
mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers
kernel/ucount.c: mark user_header with kmemleak_ignore()
Commit 210e7a43fa ("mm: SLUB freelist randomization") broke USB hub
initialisation as described in
https://bugzilla.kernel.org/show_bug.cgi?id=177551.
Bail out early from init_cache_random_seq if s->random_seq is already
initialised. This prevents destroying the previously computed
random_seq offsets later in the function.
If the offsets are destroyed, then shuffle_freelist will truncate
page->freelist to just the first object (orphaning the rest).
Fixes: 210e7a43fa ("mm: SLUB freelist randomization")
Link: http://lkml.kernel.org/r/20170207140707.20824-1-sean@erifax.org
Signed-off-by: Sean Rees <sean@erifax.org>
Reported-by: <userwithuid@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 513e3d2d11 ("cpumask: always use nr_cpu_ids in formatting and
parsing functions") converted both cpumask printing and parsing
functions to use nr_cpu_ids instead of nr_cpumask_bits. While this was
okay for the printing functions as it just picked one of the two output
formats that we were alternating between depending on a kernel config,
doing the same for parsing wasn't okay.
nr_cpumask_bits can be either nr_cpu_ids or NR_CPUS. We can always use
nr_cpu_ids but that is a variable while NR_CPUS is a constant, so it can
be more efficient to use NR_CPUS when we can get away with it.
Converting the printing functions to nr_cpu_ids makes sense because it
affects how the masks get presented to userspace and doesn't break
anything; however, using nr_cpu_ids for parsing functions can
incorrectly leave the higher bits uninitialized while reading in these
masks from userland. As all testing and comparison functions use
nr_cpumask_bits which can be larger than nr_cpu_ids, the parsed cpumasks
can erroneously yield false negative results.
This made the taskstats interface incorrectly return -EINVAL even when
the inputs were correct.
Fix it by restoring the parse functions to use nr_cpumask_bits instead
of nr_cpu_ids.
Link: http://lkml.kernel.org/r/20170206182442.GB31078@htj.duckdns.org
Fixes: 513e3d2d11 ("cpumask: always use nr_cpu_ids in formatting and parsing functions")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Martin Steigerwald <martin.steigerwald@teamix.de>
Debugged-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: <stable@vger.kernel.org> [4.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some ->page_mkwrite handlers may return VM_FAULT_RETRY as its return
code (GFS2 or Lustre can definitely do this). However VM_FAULT_RETRY
from ->page_mkwrite is completely unhandled by the mm code and results
in locking and writeably mapping the page which definitely is not what
the caller wanted.
Fix Lustre and block_page_mkwrite_ret() used by other filesystems
(notably GFS2) to return VM_FAULT_NOPAGE instead which results in
bailing out from the fault code, the CPU then retries the access, and we
fault again effectively doing what the handler wanted.
Link: http://lkml.kernel.org/r/20170203150729.15863-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The user_header gets caught by kmemleak with the following splat as
missing a free:
unreferenced object 0xffff99667a733d80 (size 96):
comm "swapper/0", pid 1, jiffies 4294892317 (age 62191.468s)
hex dump (first 32 bytes):
a0 b6 92 b4 ff ff ff ff 00 00 00 00 01 00 00 00 ................
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
kmemleak_alloc+0x4a/0xa0
__kmalloc+0x144/0x260
__register_sysctl_table+0x54/0x5e0
register_sysctl+0x1b/0x20
user_namespace_sysctl_init+0x17/0x34
do_one_initcall+0x52/0x1a0
kernel_init_freeable+0x173/0x200
kernel_init+0xe/0x100
ret_from_fork+0x2c/0x40
The BUG_ON()s are intended to crash so no need to clean up after
ourselves on error there. This is also a kernel/ subsys_init() we don't
need a respective exit call here as this is never modular, so just white
list it.
Link: http://lkml.kernel.org/r/20170203211404.31458-1-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When drm_crtc_init_with_planes() was orignally added
(in drm_crtc.c, e13161af80
drm: Add drm_crtc_init_with_planes() (v2)), it only checked for "primary"
being non-null. If that was the case, it modified primary->possible_crtcs.
Then, when support for cursor planes was added
(fc1d3e44ef drm: Allow drivers to register
cursor planes with crtc), the same behaviour was implemented for cursor
planes.
vc4_plane_init() since its inception has passed 0xff as "possible_crtcs"
parameter to drm_universal_plane_init(). With a change in drm_crtc.c
(7abc7d4751 drm: don't override
possible_crtcs for primary/cursor planes) passing 0xff results in primary's
possible_crtcs set to 0xff (cursor was updated manually by vc4_crtc.c).
Consequently, it would be allowed to use the primary plane from CRTC 1 (for
example) on CRTC 0, which would result in the overlay and cursors being
buried.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1485941708-27892-1-git-send-email-andrzej.p@samsung.com
Fixes: 7abc7d4751 ("drm: don't override possible_crtcs for primary/cursor planes")
This patch fixes the case where there is no phydev attached
to a LMAC in DT due to non-existance of a PHY driver or due
to usage of non-stanadard PHY which doesn't support autoneg.
Changes dependeds on firmware to send correct info w.r.t
PHY and autoneg capability.
This patch also covers a case where a 10G/40G interface is used
as a 1G with convertors with Cortina PHY in between.
Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@cavium.com>
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uhbh
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.10-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- check MSI affinity vs. number of vectors to avoid memory corruption
- drop runtime power management for PCIe hotplug ports for now to avoid
regressing hotplug via sysfs
* tag 'pci-v4.10-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: pciehp: Add runtime PM support for PCIe hotplug ports"
PCI/MSI: Don't apply affinity if there aren't enough vectors left
dsa_slave_create() can fail, and dsa_user_port_unapply() will properly check
for the network device not being NULL before attempting to destroy it. We were
not setting the slave network device as NULL if dsa_slave_create() failed, so
we would later on be calling dsa_slave_destroy() on a now free'd and
unitialized network device, causing crashes in dsa_slave_destroy().
Fixes: 83c0afaec7 ("net: dsa: Add new binding implementation")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn says:
====================
net: Fixes for header length truncation
Packets should not enter the stack with truncated link layer headers
and link layer headers should always be stored in the skb linear
segment.
Patch 1 ensures the first for PF_PACKET sockets
Patch 2 ensures the second for PF_PACKET GSO sockets without tx_ring
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Link layer protocols may unconditionally pull headers, as Ethernet
does in eth_type_trans. Ensure that the entire link layer header
always lies in the skb linear segment. tpacket_snd has such a check.
Extend this to packet_snd.
Variable length link layer headers complicate the computation
somewhat. Here skb->len may be smaller than dev->hard_header_len.
Round up the linear length to be at least as long as the smallest of
the two.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The stack must not pass packets to device drivers that are shorter
than the minimum link layer header length.
Previously, packet sockets would drop packets smaller than or equal
to dev->hard_header_len, but this has false positives. Zero length
payload is used over Ethernet. Other link layer protocols support
variable length headers. Support for validation of these protocols
removed the min length check for all protocols.
Introduce an explicit dev->min_header_len parameter and drop all
packets below this value. Initially, set it to non-zero only for
Ethernet and loopback. Other protocols can follow in a patch to
net-next.
Fixes: 9ed988cd59 ("packet: validate variable length ll headers")
Reported-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds internal LIO sgl limit since the driver already
sets a max transfer limit on transport layer of 1MB to the client.
Cc: stable@vger.kernel.org
Tested-by: Steven Royer <seroyer@linux.vnet.ibm.com>
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
- A relatively large patch restores booting on i.MX platforms that
failed to boot after a cleanup was merged for v4.10.
- A quirk for USB needs to be enabled on the STi platform
- On the Meson platform, we saw memory corruption with part of
the memory used by the secure monitor, so we have to stay out
of that area.
- The same platform also has a problem with ethernet under load,
which is fixed by disabling EEE negotiation.
- imx6dl has an incorrect pin configuration, which prevents SPI
from working.
- Two maintainers have lost their access to their email addresses, so
we should update the MAINTAINERS file before the release
- Renaming one of the orion5x linkstation models to help simplify
the debian install.
- A couple of fixes for build warnings that were introduced during
v4.10-rc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zlTb
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
- A relatively large patch restores booting on i.MX platforms that
failed to boot after a cleanup was merged for v4.10.
- A quirk for USB needs to be enabled on the STi platform
- On the Meson platform, we saw memory corruption with part of the
memory used by the secure monitor, so we have to stay out of that
area.
- The same platform also has a problem with ethernet under load, which
is fixed by disabling EEE negotiation.
- imx6dl has an incorrect pin configuration, which prevents SPI from
working.
- Two maintainers have lost their access to their email addresses, so
we should update the MAINTAINERS file before the release
- Renaming one of the orion5x linkstation models to help simplify the
debian install.
- A couple of fixes for build warnings that were introduced during
v4.10-rc.
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: defconfigs: make NF_CT_PROTO_SCTP and NF_CT_PROTO_UDPLITE built-in
MAINTAINERS: socfpga: update email for Dinh Nguyen
ARM: orion5x: fix Makefile for linkstation-lschl.dtb
ARM: dts: orion5x-lschl: More consistent naming on linkstation series
ARM: dts: orion5x-lschl: Fix model name
MAINTAINERS: change email address from atmel to microchip
MAINTAINERS: at91: change email address
ARM64: dts: meson-gx: Add firmware reserved memory zones
ARM64: dts: meson-gxbb-odroidc2: fix GbE tx link breakage
ARM: dts: STiH407-family: set snps,dis_u3_susphy_quirk
ARM: dts: imx: Pass 'chosen' and 'memory' nodes
ARM: dts: imx6dl: fix GPIO4 range
ARM: imx: hide unused variable in #ifdef
Pull selinux fix from James Morris:
"Fix off-by-one in setprocattr"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
selinux: fix off-by-one in setprocattr
Pull block fix from Jens Axboe:
"A single fix that should go into 4.10, fixing a regression on some
devices with the WRITE_SAME command"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: don't try Write Same from __blkdev_issue_zeroout
An error was reported upgrading to 4.9.8:
root@Typhoon:~# ip route add default table 210 nexthop dev eth0 via 10.68.64.1
weight 1 nexthop dev eth0 via 10.68.64.2 weight 1
RTNETLINK answers: Operation not supported
The problem occurs when CONFIG_LWTUNNEL is not enabled and a multipath
route is submitted.
The point of lwtunnel_valid_encap_type_attr is catch modules that
need to be loaded before any references are taken with rntl held. With
CONFIG_LWTUNNEL disabled, there will be no modules to load so the
lwtunnel_valid_encap_type_attr stub should just return 0.
Fixes: 9ed59592e3 ("lwtunnel: fix autoload of lwt modules")
Reported-by: pupilla@libero.it
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove references to private kernel header and defines from exported
ib_user_verb.h file.
The code snippet below is used to reproduce the issue:
#include <stdio.h>
#include <rdma/ib_user_verb.h>
int main(void)
{
printf("IB_USER_VERBS_ABI_VERSION = %d\n", IB_USER_VERBS_ABI_VERSION);
return 0;
}
It fails during compilation phase with an error:
➜ /tmp gcc main.c
main.c:2:31: fatal error: rdma/ib_user_verb.h: No such file or directory
#include <rdma/ib_user_verb.h>
^
compilation terminated.
Fixes: 189aba99e7 ("IB/uverbs: Extend modify_qp and support packet pacing")
CC: Bodong Wang <bodong@mellanox.com>
CC: Matan Barak <matanb@mellanox.com>
CC: Christoph Hellwig <hch@infradead.org>
Tested-by: Slava Shwartsman <slavash@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Update the range check to avoid integer-overflow in edge case.
Resolves CVE 2016-8636.
Signed-off-by: Eyal Itkin <eyal.itkin@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Update the response's resid field when larger than MTU, instead of only
updating the local resid variable.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Eyal Itkin <eyal.itkin@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Under some circumstances it is possible that no new temporary addresses
will be generated.
For instance, addrconf_prefix_rcv_add_addr() indirectly calls
ipv6_create_tempaddr(), which creates a tentative temporary address and
starts dad. Next, addrconf_prefix_rcv_add_addr() indirectly calls
addrconf_verify_rtnl(). Now, assume that the previously created temporary
address has the least preferred lifetime among all existing addresses and
is still tentative (that is, dad is still running). Hence, the next run of
addrconf_verify_rtnl() is performed when the preferred lifetime of the
temporary address ends. If dad succeeds before the next run, the temporary
address becomes deprecated during the next run, but no new temporary
address is generated.
In order to fix this, schedule the next addrconf_verify_rtnl() run slightly
before the temporary address becomes deprecated, if dad succeeded.
Signed-off-by: Marcus Huewe <suse-tux@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 4c63c2454e incorrectly assumed that returning -ENOIOCTLCMD would
cause the native ioctl to be called. The ->compat_ioctl callback is
expected to handle all ioctls, not just compat variants. As a result,
when using 32-bit userspace on 64-bit kernels, everything except those
three ioctls would return -ENOTTY.
Fixes: 4c63c2454e ("btrfs: bugfix: handle FS_IOC32_{GETFLAGS,SETFLAGS,GETVERSION} in btrfs_ioctl")
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch addresses a long standing bug where the commit phase
of COMPARE_AND_WRITE would result in a se_cmd->cmd_kref reference
leak if se_cmd->scsi_status returned non SAM_STAT_GOOD.
This would manifest first as a lost SCSI response, and eventual
hung task during fabric driver logout or re-login, as existing
shutdown logic waited for the COMPARE_AND_WRITE se_cmd->cmd_kref
to reach zero.
To address this bug, compare_and_write_post() has been changed
to drop the incorrect !cmd->scsi_status conditional that was
preventing *post_ret = 1 for being set during non SAM_STAT_GOOD
status.
This patch has been tested with SAM_STAT_CHECK_CONDITION status
from normal target_complete_cmd() callback path, as well as the
incoming __target_execute_cmd() submission failure path when
se_cmd->execute_cmd() returns non zero status.
Reported-by: Donald White <dew@datera.io>
Cc: Donald White <dew@datera.io>
Tested-by: Gary Guo <ghg@datera.io>
Cc: Gary Guo <ghg@datera.io>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org> # v3.12+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch addresses a long-standing bug with multi-session
(eg: iscsi-target + iser-target) se_node_acl dynamic free
withini transport_deregister_session().
This bug is caused when a storage endpoint is configured with
demo-mode (generate_node_acls = 1 + cache_dynamic_acls = 1)
initiators, and initiator login creates a new dynamic node acl
and attaches two sessions to it.
After that, demo-mode for the storage instance is disabled via
configfs (generate_node_acls = 0 + cache_dynamic_acls = 0) and
the existing dynamic acl is never converted to an explicit ACL.
The end result is dynamic acl resources are released twice when
the sessions are shutdown in transport_deregister_session().
If the storage instance is not changed to disable demo-mode,
or the dynamic acl is converted to an explict ACL, or there
is only a single session associated with the dynamic ACL,
the bug is not triggered.
To address this big, move the release of dynamic se_node_acl
memory into target_complete_nacl() so it's only freed once
when se_node_acl->acl_kref reaches zero.
(Drop unnecessary list_del_init usage - HCH)
Reported-by: Rob Millner <rlm@daterainc.com>
Tested-by: Rob Millner <rlm@daterainc.com>
Cc: Rob Millner <rlm@daterainc.com>
Cc: stable@vger.kernel.org # 4.1+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch fixes a bug where incoming task management requests
can be explicitly aborted during an active LUN_RESET, but who's
struct work_struct are canceled in-flight before execution.
This occurs when core_tmr_drain_tmr_list() invokes cancel_work_sync()
for the incoming se_tmr_req->task_cmd->work, resulting in cmd->work
for target_tmr_work() never getting invoked and the aborted TMR
waiting indefinately within transport_wait_for_tasks().
To address this case, perform a CMD_T_ABORTED check early in
transport_generic_handle_tmr(), and invoke the normal path via
transport_cmd_check_stop_to_fabric() to complete any TMR kthreads
blocked waiting for CMD_T_STOP in transport_wait_for_tasks().
Also, move the TRANSPORT_ISTATE_PROCESSING assignment earlier
into transport_generic_handle_tmr() so the existing check in
core_tmr_drain_tmr_list() avoids attempting abort the incoming
se_tmr_req->task_cmd->work if it has already been queued into
se_device->tmr_wq.
Reported-by: Rob Millner <rlm@daterainc.com>
Tested-by: Rob Millner <rlm@daterainc.com>
Cc: Rob Millner <rlm@daterainc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch adds the missing target_complete_cmd() SCSI status
parameter change in target_xcopy_do_work(), that was originally
missing in commit 926317de33.
It correctly propigates up the correct SCSI status during
EXTENDED_COPY exception cases, instead of always using the
hardcoded SAM_STAT_CHECK_CONDITION from original code.
This is required for ESX host environments that expect to
hit SAM_STAT_RESERVATION_CONFLICT for certain scenarios,
and SAM_STAT_CHECK_CONDITION results in non-retriable
status for these cases.
Reported-by: Nixon Vincent <nixon.vincent@calsoftinc.com>
Tested-by: Nixon Vincent <nixon.vincent@calsoftinc.com>
Cc: Nixon Vincent <nixon.vincent@calsoftinc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
After the v4.2+ RCU conversion to se_node_acl->lun_entry_hlist,
a BUG_ON() was added in core_enable_device_list_for_node() to
detect when the located orig->se_lun_acl contains an existing
se_lun_acl pointer reference.
However, this scenario can happen when a dynamically generated
NodeACL is being converted to an explicit NodeACL, when the
explicit NodeACL contains a different LUN mapping than the
default provided by the WWN endpoint.
So instead of triggering BUG_ON(), go ahead and fail instead
following the original pre RCU conversion logic.
Reported-by: Benjamin ESTRABAUD <ben.estrabaud@mpstor.com>
Cc: Benjamin ESTRABAUD <ben.estrabaud@mpstor.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
When autonuma (Automatic NUMA balancing) marks a PTE inaccessible it
clears all the protection bits but leave the PTE valid.
With the Radix MMU, an attempt at executing from such a PTE will
take a fault with bit 35 of SRR1 set "SRR1_ISI_N_OR_G".
It is thus incorrect to treat all such faults as errors. We should
pass them to handle_mm_fault() for autonuma to deal with. The case
of pages that are really not executable is handled by the existing
test for VM_EXEC further down.
That leaves us with catching the kernel attempts at executing user
pages. We can catch that earlier, even before we do find_vma.
It is never valid on powerpc for the kernel to take an exec fault
to begin with. So fold that test with the existing test for the
kernel faulting on kernel addresses to bail out early.
Fixes: 1d18ad0268 ("powerpc/mm: Detect instruction fetch denied and report")
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When a sequencer queue is created in snd_seq_queue_alloc(),it adds the
new queue element to the public list before referencing it. Thus the
queue might be deleted before the call of snd_seq_queue_use(), and it
results in the use-after-free error, as spotted by syzkaller.
The fix is to reference the queue object at the right time.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We're using non-canonical addresses in drm_mm, and we're making sure that
userspace is using canonical addressing - both in case of softpin
(verifying incoming offset) and when relocating (converting to canonical
when updating offset returned to userspace).
Unfortunately when considering the need for relocations, we're comparing
offset from userspace (in canonical form) with drm_mm node (in
non-canonical form), and as a result, we end up always relocating if our
offsets are in the "problematic" range.
Let's always convert the offsets to avoid the performance impact of
relocations.
Fixes: a5f0edf63b ("drm/i915: Avoid writing relocs with addresses in non-canonical form")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Reported-by: Michał Pyrzowski <michal.pyrzowski@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207195559.18798-1-michal.winiarski@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 038c95a313)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The goal of the WARN was to catch when we are still actively using the
fence as we go into the runtime suspend. However, the reg->pin_count is
too coarse as it does not distinguish between exclusive ownership of the
fence register from activity.
I've not improved on the WARN, nor have we captured this WARN in an
exact igt, but it is showing up regularly in the wild:
[ 1915.935332] WARNING: CPU: 1 PID: 10861 at drivers/gpu/drm/i915/i915_gem.c:2022 i915_gem_runtime_suspend+0x116/0x130 [i915]
[ 1915.935383] WARN_ON(reg->pin_count)[ 1915.935399] Modules linked in:
snd_hda_intel i915 drm_kms_helper vgem netconsole scsi_transport_iscsi fuse vfat fat x86_pkg_temp_thermal coretemp intel_cstate intel_uncore snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mei_me mei serio_raw intel_rapl_perf intel_pch_thermal soundcore wmi acpi_pad i2c_algo_bit syscopyarea sysfillrect sysimgblt fb_sys_fops drm r8169 mii video [last unloaded: drm_kms_helper]
[ 1915.935785] CPU: 1 PID: 10861 Comm: kworker/1:0 Tainted: G U W 4.9.0-rc5+ #170
[ 1915.935799] Hardware name: LENOVO 80MX/Lenovo E31-80, BIOS DCCN34WW(V2.03) 12/01/2015
[ 1915.935822] Workqueue: pm pm_runtime_work
[ 1915.935845] ffffc900044fbbf0 ffffffffac3220bc ffffc900044fbc40 0000000000000000
[ 1915.935890] ffffc900044fbc30 ffffffffac059bcb 000007e6044fbc60 ffff8801626e3198
[ 1915.935937] ffff8801626e0000 0000000000000002 ffffffffc05e5d4e 0000000000000000
[ 1915.935985] Call Trace:
[ 1915.936013] [<ffffffffac3220bc>] dump_stack+0x4f/0x73
[ 1915.936038] [<ffffffffac059bcb>] __warn+0xcb/0xf0
[ 1915.936060] [<ffffffffac059c4f>] warn_slowpath_fmt+0x5f/0x80
[ 1915.936158] [<ffffffffc052d916>] i915_gem_runtime_suspend+0x116/0x130 [i915]
[ 1915.936251] [<ffffffffc04f1c74>] intel_runtime_suspend+0x64/0x280 [i915]
[ 1915.936277] [<ffffffffac0926f1>] ? dequeue_entity+0x241/0xbc0
[ 1915.936298] [<ffffffffac36bb85>] pci_pm_runtime_suspend+0x55/0x180
[ 1915.936317] [<ffffffffac36bb30>] ? pci_pm_runtime_resume+0xa0/0xa0
[ 1915.936339] [<ffffffffac4514e2>] __rpm_callback+0x32/0x70
[ 1915.936356] [<ffffffffac451544>] rpm_callback+0x24/0x80
[ 1915.936375] [<ffffffffac36bb30>] ? pci_pm_runtime_resume+0xa0/0xa0
[ 1915.936392] [<ffffffffac45222d>] rpm_suspend+0x12d/0x680
[ 1915.936415] [<ffffffffac69f6d7>] ? _raw_spin_unlock_irq+0x17/0x30
[ 1915.936435] [<ffffffffac0810b8>] ? finish_task_switch+0x88/0x220
[ 1915.936455] [<ffffffffac4534bf>] pm_runtime_work+0x6f/0xb0
[ 1915.936477] [<ffffffffac074353>] process_one_work+0x1f3/0x4d0
[ 1915.936501] [<ffffffffac074678>] worker_thread+0x48/0x4e0
[ 1915.936523] [<ffffffffac074630>] ? process_one_work+0x4d0/0x4d0
[ 1915.936542] [<ffffffffac074630>] ? process_one_work+0x4d0/0x4d0
[ 1915.936559] [<ffffffffac07a2c9>] kthread+0xd9/0xf0
[ 1915.936580] [<ffffffffac07a1f0>] ? kthread_park+0x60/0x60
[ 1915.936600] [<ffffffffac69fe62>] ret_from_fork+0x22/0x30
In the case the register is pinned, it should be present and we will
need to invalidate them to be restored upon resume as we cannot expect
the owner of the pin to call get_fence prior to use after resume.
Fixes: 7c108fd8fe ("drm/i915: Move fence cancellation to runtime suspend")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98804
Reported-by: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Imre Deak <imre.deak@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20170203125717.8431-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit e0ec3ec698)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add the missing INTEL_OUTPUT_DP_MST case in bxt_get_dpll()
to correctly initialize the crtc_state and port plls when
link training a DP MST monitor on BXT/APL devices.
Fixes: a277ca7dc0 ("drm/i915: Split bxt_ddi_pll_select()")
Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=99572
Reviewed-by: Cooper Chiou <cooper.chiou@intel.com>
Reviewed-by: Gary C Wang <gary.c.wang@intel.com>
Reviewed-by: Ciobanu, Nathan D <nathan.d.ciobanu@intel.com>
Reviewed-by: Herbert, Marc <marc.herbert@intel.com>
Reviewed-by: Bride, Jim <jim.bride@intel.com>
Reviewed-by: Navare, Manasi D <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486096329-6255-1-git-send-email-shawn.c.lee@intel.com
(cherry picked from commit 0aab2c721d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This fixes a race condition that may occur whenever ST micro busy end
interrupt is raised just after being unmasked but before leaving mmci
interrupt context.
A dead-lock has been found if connecting mmci ST Micro variant whose amba
id is 0x10480180 to some new eMMC that supports internal caches. Whenever
mmci driver enables cache control by programming eMMC's EXT_CSD register,
block driver may request to flush the eMMC internal caches causing mmci
driver to send a MMC_SWITCH command to the card with FLUSH_CACHE operation.
And because busy end interrupt may be mistakenly cleared while not yet
processed, this mmc request may never complete. As a result, mmcqd task
may be stuck forever.
Here is an instance caught by lockup detector which shows that mmcqd task
was hung while waiting for mmc_flush_cache command to complete:
..
[ 240.251595] INFO: task mmcqd/1:52 blocked for more than 120 seconds.
[ 240.257973] Not tainted 4.1.13-00510-g9d91424 #2
[ 240.263109] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.270955] mmcqd/1 D c047504c 0 52 2 0x00000000
[ 240.277359] [<c047504c>] (__schedule) from [<c04754a0>] (schedule+0x40/0x98)
[ 240.284418] [<c04754a0>] (schedule) from [<c0477d40>] (schedule_timeout+0x148/0x188)
[ 240.292191] [<c0477d40>] (schedule_timeout) from [<c0476040>] (wait_for_common+0xa4/0x170)
[ 240.300491] [<c0476040>] (wait_for_common) from [<c02efc1c>] (mmc_wait_for_req_done+0x4c/0x13c)
[ 240.309224] [<c02efc1c>] (mmc_wait_for_req_done) from [<c02efd90>] (mmc_wait_for_cmd+0x64/0x84)
[ 240.317953] [<c02efd90>] (mmc_wait_for_cmd) from [<c02f5b14>] (__mmc_switch+0xa4/0x2a8)
[ 240.325964] [<c02f5b14>] (__mmc_switch) from [<c02f5d40>] (mmc_switch+0x28/0x30)
[ 240.333389] [<c02f5d40>] (mmc_switch) from [<c02f0984>] (mmc_flush_cache+0x54/0x80)
[ 240.341073] [<c02f0984>] (mmc_flush_cache) from [<c02ff0c4>] (mmc_blk_issue_rq+0x114/0x4e8)
[ 240.349459] [<c02ff0c4>] (mmc_blk_issue_rq) from [<c03008d4>] (mmc_queue_thread+0xc0/0x180)
[ 240.357844] [<c03008d4>] (mmc_queue_thread) from [<c003cf90>] (kthread+0xdc/0xf4)
[ 240.365339] [<c003cf90>] (kthread) from [<c0010068>] (ret_from_fork+0x14/0x2c)
..
..
[ 240.664311] INFO: task partprobe:564 blocked for more than 120 seconds.
[ 240.670943] Not tainted 4.1.13-00510-g9d91424 #2
[ 240.676078] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.683922] partprobe D c047504c 0 564 486 0x00000000
[ 240.690318] [<c047504c>] (__schedule) from [<c04754a0>] (schedule+0x40/0x98)
[ 240.697396] [<c04754a0>] (schedule) from [<c0477d40>] (schedule_timeout+0x148/0x188)
[ 240.705149] [<c0477d40>] (schedule_timeout) from [<c0476040>] (wait_for_common+0xa4/0x170)
[ 240.713446] [<c0476040>] (wait_for_common) from [<c01f3300>] (submit_bio_wait+0x58/0x64)
[ 240.721571] [<c01f3300>] (submit_bio_wait) from [<c01fbbd8>] (blkdev_issue_flush+0x60/0x88)
[ 240.729957] [<c01fbbd8>] (blkdev_issue_flush) from [<c010ff84>] (blkdev_fsync+0x34/0x44)
[ 240.738083] [<c010ff84>] (blkdev_fsync) from [<c0109594>] (do_fsync+0x3c/0x64)
[ 240.745319] [<c0109594>] (do_fsync) from [<c000ffc0>] (ret_fast_syscall+0x0/0x3c)
..
Here is the detailed sequence showing when this issue may happen:
1) At probe time, mmci device is initialized and card busy detection based
on DAT[0] monitoring is enabled.
2) Later during run time, since card reported to support internal caches, a
MMCI_SWITCH command is sent to eMMC device with FLUSH_CACHE operation. On
receiving this command, eMMC may enter busy state (for a relatively short
time in the case of the dead-lock).
3) Then mmci interrupt is raised and mmci_irq() is called:
MMCISTATUS register is read and is equal to 0x01000440. So the following
status bits are set:
- MCI_CMDRESPEND (= 6)
- MCI_DATABLOCKEND (= 10)
- MCI_ST_CARDBUSY (= 24)
Since MMCIMASK0 register is 0x3FF, status variable is set to 0x00000040 and
BIT MCI_CMDRESPEND is cleared by writing MMCICLEAR register.
Then mmci_cmd_irq() is called. Considering the following conditions:
- host->busy_status is 0,
- this is a "busy response",
- reading again MMCISTATUS register gives 0x1000400,
MMCIMASK0 is updated to unmask MCI_ST_BUSYEND bit.
Thus, MMCIMASK0 is set to 0x010003FF and host->busy_status is set to wait
for busy end completion.
Back again in status loop of mmci_irq(), we quickly go through
mmci_data_irq() as there are no data in that case. And we finally go
through following test at the end of while(status) loop:
/*
* Don't poll for busy completion in irq context.
*/
if (host->variant->busy_detect && host->busy_status)
status &= ~host->variant->busy_detect_flag;
Because status variable is not yet null (is equal to 0x40), we do not leave
interrupt context yet but we loop again into while(status) loop. So we run
across following steps:
a) MMCISTATUS register is read again and this time is equal to 0x01000400.
So that following bits are set:
- MCI_DATABLOCKEND (= 10)
- MCI_ST_CARDBUSY (= 24)
Since MMCIMASK0 register is equal to 0x010003FF:
b) status variable is set to 0x01000000.
c) MCI_ST_CARDBUSY bit is cleared by writing MMCICLEAR register.
Then, mmci_cmd_irq() is called one more time. Since host->busy_status is
set and that MCI_ST_CARDBUSY is set in status variable, we just return from
this function.
Back again in mmci_irq(), status variable is set to 0 and we finally leave
the while(status) loop. As a result we leave interrupt context, waiting for
busy end interrupt event.
Now, consider that busy end completion is raised IN BETWEEN steps 3.a) and
3.c). In such a case, we may mistakenly clear busy end interrupt at step
3.c) while it has not yet been processed. This will result in mmc command
to wait forever for a busy end completion that will never happen.
To fix the problem, this patch implements the following changes:
Considering that the mmci seems to be triggering the IRQ on both edges
while monitoring DAT0 for busy completion and that same status bit is used
to monitor start and end of busy detection, special care must be taken to
make sure that both start and end interrupts are always cleared one after
the other.
1) Clearing of card busy bit is moved in mmc_cmd_irq() function where
unmasking of busy end bit is effectively handled.
2) Just before unmasking busy end event, busy start event is cleared by
writing card busy bit in MMCICLEAR register.
3) Finally, once we are no more busy with a command, busy end event is
cleared writing again card busy bit in MMCICLEAR register.
This patch has been tested with the ST Accordo5 machine, not yet supported
upstream but relies on the mmci driver.
Signed-off-by: Sarang Mairal <sarang.mairal@garmin.com>
Signed-off-by: Jean-Nicolas Graux <jean-nicolas.graux@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Apparently there are machines out there with Skylake CPU and KabyPoint
PCH. Judging from our driver code, there doesn't seem to be any code
paths that would do anything different between SunrisePoint and
KabyPoint PCHs, so it would seem okay to accept the combo without
warnings.
Fixes: 22dea0be50 ("drm/i915: Introduce Kabypoint PCH for Kabylake H/DT.")
References: https://lists.freedesktop.org/archives/intel-gfx/2017-February/118611.html
Reported-by: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Cc: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.8+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485956769-26015-1-git-send-email-jani.nikula@intel.com
(cherry picked from commit 3aac4acb89)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit 920cf41949 ("drm/i915: Introduce an internal allocator for
disposable private objects") introduced a regression for the kernel
running as Xen dom0: when switching to graphics mode a GPU HANG
occurred.
Reason seems to be a missing adaption similar to that done in
commit 7453c549f5 ("swiotlb: Export swiotlb_max_segment to users")
to i915_gem_object_get_pages_internal().
So limit the maximum page order to be used according to the maximum
swiotlb segment size instead to the complete swiotlb size.
Fixes: 920cf41949 ("drm/i915: Introduce an internal allocator for disposable private objects")
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202094711.939-1-jgross@suse.com
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 5584f1b1d7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
On a non-llc system, the objects are created with .cache_level =
CACHE_NONE and so the transition to uncached for scanout is a no-op.
However, if the object was never written to, it will still be in the CPU
domain (having been zeroed out by shmemfs). Those cachelines need to be
flushed prior to display.
Reported-and-tested-by: Vito Caputo
Fixes: a6a7cc4b7d ("drm/i915: Always flush the dirty CPU cache when pinning the scanout")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20170109111932.6342-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 69aeafeae9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
SELinux tries to support setting/clearing of /proc/pid/attr attributes
from the shell by ignoring terminating newlines and treating an
attribute value that begins with a NUL or newline as an attempt to
clear the attribute. However, the test for clearing attributes has
always been wrong; it has an off-by-one error, and this could further
lead to reading past the end of the allocated buffer since commit
bb646cdb12 ("proc_pid_attr_write():
switch to memdup_user()"). Fix the off-by-one error.
Even with this fix, setting and clearing /proc/pid/attr attributes
from the shell is not straightforward since the interface does not
support multiple write() calls (so shells that write the value and
newline separately will set and then immediately clear the attribute,
requiring use of echo -n to set the attribute), whereas trying to use
echo -n "" to clear the attribute causes the shell to skip the
write() call altogether since POSIX says that a zero-length write
causes no side effects. Thus, one must use echo -n to set and echo
without -n to clear, as in the following example:
$ echo -n unconfined_u:object_r:user_home_t:s0 > /proc/$$/attr/fscreate
$ cat /proc/$$/attr/fscreate
unconfined_u:object_r:user_home_t:s0
$ echo "" > /proc/$$/attr/fscreate
$ cat /proc/$$/attr/fscreate
Note the use of /proc/$$ rather than /proc/self, as otherwise
the cat command will read its own attribute value, not that of the shell.
There are no users of this facility to my knowledge; possibly we
should just get rid of it.
UPDATE: Upon further investigation it appears that a local process
with the process:setfscreate permission can cause a kernel panic as a
result of this bug. This patch fixes CVE-2017-2618.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: added the update about CVE-2017-2618 to the commit description]
Cc: stable@vger.kernel.org # 3.5: d6ea83ec68
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Since KERN_CONT became meaningful again, lockdep stack traces have had
annoying extra newlines, like this:
[ 5.561122] -> #1 (B){+.+...}:
[ 5.561528]
[ 5.561532] [<ffffffff810d8873>] lock_acquire+0xc3/0x210
[ 5.562178]
[ 5.562181] [<ffffffff816f6414>] mutex_lock_nested+0x74/0x6d0
[ 5.562861]
[ 5.562880] [<ffffffffa01aa3c3>] init_btrfs_fs+0x21/0x196 [btrfs]
[ 5.563717]
[ 5.563721] [<ffffffff81000472>] do_one_initcall+0x52/0x1b0
[ 5.564554]
[ 5.564559] [<ffffffff811a3af6>] do_init_module+0x5f/0x209
[ 5.565357]
[ 5.565361] [<ffffffff81122f4d>] load_module+0x218d/0x2b80
[ 5.566020]
[ 5.566021] [<ffffffff81123beb>] SyS_finit_module+0xeb/0x120
[ 5.566694]
[ 5.566696] [<ffffffff816fd241>] entry_SYSCALL_64_fastpath+0x1f/0xc2
That's happening because each printk() call now gets printed on its own
line, and we do a separate call to print the spaces before the symbol.
Fix it by doing the printk() directly instead of using the
print_ip_sym() helper.
Additionally, the symbol address isn't very helpful, so let's get rid of
that, too. The final result looks like this:
[ 5.194518] -> #1 (B){+.+...}:
[ 5.195002] lock_acquire+0xc3/0x210
[ 5.195439] mutex_lock_nested+0x74/0x6d0
[ 5.196491] do_one_initcall+0x52/0x1b0
[ 5.196939] do_init_module+0x5f/0x209
[ 5.197355] load_module+0x218d/0x2b80
[ 5.197792] SyS_finit_module+0xeb/0x120
[ 5.198251] entry_SYSCALL_64_fastpath+0x1f/0xc2
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-team@fb.com
Fixes: 4bcc595ccd ("printk: reinstate KERN_CONT for printing continuation lines")
Link: http://lkml.kernel.org/r/43b4e114724b2bdb0308fa86cb33aa07d3d67fad.1486510315.git.osandov@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
