- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of
a lot of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockde and the latency tracers
just get called directly (without using the trace events).
But because the original change cleaned up the code very nicely
we kept that, as well as the trace events for preempt and irqs
disabling, but they are limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not
allow them to be called in NMI context. Waiting till Paul makes
an NMI safe SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested
before the merge window opened.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW3ruhRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiM7AP47NhYdSnCFCRUJfrt6PovXmQtuCHt3
c3QMoGGdvzh9YAEAqcSXwh7uLhpHUp1LjMAPkXdZVwNddf4zJQ1zyxQ+EAU=
=vgEr
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of a lot
of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockdep and the latency tracers just
get called directly (without using the trace events). But because the
original change cleaned up the code very nicely we kept that, as well
as the trace events for preempt and irqs disabling, but they are
limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not allow
them to be called in NMI context. Waiting till Paul makes an NMI safe
SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested before
the merge window opened.
* tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
tracing: Fix SPDX format headers to use C++ style comments
tracing: Add SPDX License format tags to tracing files
tracing: Add SPDX License format to bpf_trace.c
blktrace: Add SPDX License format header
s390/ftrace: Add -mfentry and -mnop-mcount support
tracing: Add -mcount-nop option support
tracing: Avoid calling cc-option -mrecord-mcount for every Makefile
tracing: Handle CC_FLAGS_FTRACE more accurately
Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
Uprobes: Simplify uprobe_register() body
tracepoints: Free early tracepoints after RCU is initialized
uprobes: Use synchronize_rcu() not synchronize_sched()
tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister()
ftrace: Remove unused pointer ftrace_swapper_pid
tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing/irqsoff: Handle preempt_count for different configs
tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing: irqsoff: Account for additional preempt_disable
trace: Use rcu_dereference_raw for hooks from trace-event subsystem
tracing/kprobes: Fix within_notrace_func() to check only notrace functions
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=TTFG
-----END PGP SIGNATURE-----
Merge tag 'printk-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Different vendors have a different expectation about a console
quietness. Make it configurable to reduce bike-shedding about the
upstream default
- Decide about the message visibility when the message is stored. It
avoids races caused by a delayed console handling
- Always store printk() messages into the per-CPU buffers again in NMI.
The only exception is when flushing trace log in panic(). There the
risk of loosing messages is worth an eventual reordering
- Handle invalid %pO printf modifiers correctly
- Better handle %p printf modifier tests before crng is initialized
- Some clean up
* tag 'printk-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
lib/vsprintf: Do not handle %pO[^F] as %px
printk: Fix warning about unused suppress_message_printing
printk/nmi: Prevent deadlock when accessing the main log buffer in NMI
printk: Create helper function to queue deferred console handling
printk: Split the code for storing a message into the log buffer
printk: Clean up syslog_print_all()
printk: Remove unnecessary kmalloc() from syslog during clear
printk: Make CONSOLE_LOGLEVEL_QUIET configurable
printk: make sure to print log on console.
lib/test_printf.c: accept "ptrval" as valid result for plain 'p' tests
There's code that expects tracer_tracing_is_on() to be either true or false,
not some random number. Currently, it should only return one or zero, but
just in case, change its return value to bool, to enforce it.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently, when one echo's in 1 into tracing_on, the current tracer's
"start()" function is executed, even if tracing_on was already one. This can
lead to strange side effects. One being that if the hwlat tracer is enabled,
and someone does "echo 1 > tracing_on" into tracing_on, the hwlat tracer's
start() function is called again which will recreate another kernel thread,
and make it unable to remove the old one.
Link: http://lkml.kernel.org/r/1533120354-22923-1-git-send-email-erica.bugden@linutronix.de
Cc: stable@vger.kernel.org
Fixes: 2df8f8a6a8 ("tracing: Fix regression with irqsoff tracer and tracing_on file")
Reported-by: Erica Bugden <erica.bugden@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Maintain the tracing on/off setting of the ring_buffer when switching
to the trace buffer snapshot.
Taking a snapshot is done by swapping the backup ring buffer
(max_tr_buffer). But since the tracing on/off setting is defined
by the ring buffer, when swapping it, the tracing on/off setting
can also be changed. This causes a strange result like below:
/sys/kernel/debug/tracing # cat tracing_on
1
/sys/kernel/debug/tracing # echo 0 > tracing_on
/sys/kernel/debug/tracing # cat tracing_on
0
/sys/kernel/debug/tracing # echo 1 > snapshot
/sys/kernel/debug/tracing # cat tracing_on
1
/sys/kernel/debug/tracing # echo 1 > snapshot
/sys/kernel/debug/tracing # cat tracing_on
0
We don't touch tracing_on, but snapshot changes tracing_on
setting each time. This is an anomaly, because user doesn't know
that each "ring_buffer" stores its own tracing-enable state and
the snapshot is done by swapping ring buffers.
Link: http://lkml.kernel.org/r/153149929558.11274.11730609978254724394.stgit@devbox
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Hiraku Toyooka <hiraku.toyooka@cybertrust.co.jp>
Cc: stable@vger.kernel.org
Fixes: debdd57f51 ("tracing: Make a snapshot feature available from userspace")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[ Updated commit log and comment in the code ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently ftrace displays data in trace output like so:
_-----=> irqs-off
/ _----=> need-resched
| / _---=> hardirq/softirq
|| / _--=> preempt-depth
||| / delay
TASK-PID CPU TGID |||| TIMESTAMP FUNCTION
| | | | |||| | |
bash-1091 [000] ( 1091) d..2 28.313544: sched_switch:
However Android's trace visualization tools expect a slightly different
format due to an out-of-tree patch patch that was been carried for a
decade, notice that the TGID and CPU fields are reversed:
_-----=> irqs-off
/ _----=> need-resched
| / _---=> hardirq/softirq
|| / _--=> preempt-depth
||| / delay
TASK-PID TGID CPU |||| TIMESTAMP FUNCTION
| | | | |||| | |
bash-1091 ( 1091) [002] d..2 64.965177: sched_switch:
From kernel v4.13 onwards, during which TGID was introduced, tracing
with systrace on all Android kernels will break (most Android kernels
have been on 4.9 with Android patches, so this issues hasn't been seen
yet). From v4.13 onwards things will break.
The chrome browser's tracing tools also embed the systrace viewer which
uses the legacy TGID format and updates to that are known to be
difficult to make.
Considering this, I suggest we make this change to the upstream kernel
and backport it to all Android kernels. I believe this feature is merged
recently enough into the upstream kernel that it shouldn't be a problem.
Also logically, IMO it makes more sense to group the TGID with the
TASK-PID and the CPU after these.
Link: http://lkml.kernel.org/r/20180626000822.113931-1-joel@joelfernandes.org
Cc: jreck@google.com
Cc: tkjos@google.com
Cc: stable@vger.kernel.org
Fixes: 441dae8f2f ("tracing: Add support for display of tgid in trace output")
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The commit 719f6a7040 ("printk: Use the main logbuf in NMI
when logbuf_lock is available") brought back the possible deadlocks
in printk() and NMI.
The check of logbuf_lock is done only in printk_nmi_enter() to prevent
mixed output. But another CPU might take the lock later, enter NMI, and:
+ Both NMIs might be serialized by yet another lock, for example,
the one in nmi_cpu_backtrace().
+ The other CPU might get stopped in NMI, see smp_send_stop()
in panic().
The only safe solution is to use trylock when storing the message
into the main log-buffer. It might cause reordering when some lines
go to the main lock buffer directly and others are delayed via
the per-CPU buffer. It means that it is not useful in general.
This patch replaces the problematic NMI deferred context with NMI
direct context. It can be used to mark a code that might produce
many messages in NMI and the risk of losing them is more critical
than problems with eventual reordering.
The context is then used when dumping trace buffers on oops. It was
the primary motivation for the original fix. Also the reordering is
even smaller issue there because some traces have their own time stamps.
Finally, nmi_cpu_backtrace() need not longer be serialized because
it will always us the per-CPU buffers again.
Fixes: 719f6a7040 ("printk: Use the main logbuf in NMI when logbuf_lock is available")
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180627142028.11259-1-pmladek@suse.com
To: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Silence warnings (triggered at W=1) by adding relevant __printf attributes.
CC kernel/trace/trace.o
kernel/trace/trace.c: In function ‘__trace_array_vprintk’:
kernel/trace/trace.c:2979:2: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
len = vscnprintf(tbuffer, TRACE_BUF_SIZE, fmt, args);
^~~
AR kernel/trace/built-in.o
Link: http://lkml.kernel.org/r/20180308205843.27447-1-malat@debian.org
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Make use of the swap macro and remove unnecessary variable _buf_.
This makes the code easier to read and maintain. Also, reduces the
stack usage.
This code was detected with the help of Coccinelle.
Link: http://lkml.kernel.org/r/20180209175316.GA18720@embeddedgus
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
match_string() returns the index of an array for a matching string,
which can be used to simplify the code.
Link: http://lkml.kernel.org/r/1526546163-4609-1-git-send-email-xieyisheng1@huawei.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Allow writing to the trace_markers file initiate triggers defined in
tracefs/ftrace/print/trigger file. This will allow of user space to trigger
the same type of triggers (including histograms) that the trace events use.
Had to create a ftrace_event_register() function that will become the
trace_marker print event's reg() function. This is required because of how
triggers are enabled:
event_trigger_write() {
event_trigger_regex_write() {
trigger_process_regex() {
for p in trigger_commands {
p->func(); /* trigger_snapshot_cmd->func */
event_trigger_callback() {
cmd_ops->reg() /* register_trigger() */ {
trace_event_trigger_enable_disable() {
trace_event_enable_disable() {
call->class->reg();
Without the reg() function, the trigger code will call a NULL pointer and
crash the system.
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Karim Yaghmour <karim.yaghmour@opersys.com>
Cc: Brendan Gregg <bgregg@netflix.com>
Suggested-by: Joel Fernandes <joelaf@google.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Instead of having both trace_init_tracefs() and event_trace_init() be called
by fs_initcall() routines, have event_trace_init() called directly by
trace_init_tracefs(). This will guarantee order of how the events are
created with respect to the rest of the ftrace infrastructure. This is
needed to be able to assoctiate event files with ftrace internal events,
such as the trace_marker.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The snapshot trigger currently only affects the main ring buffer, even when
it is used by the instances. This can be confusing as the snapshot trigger
is listed in the instance.
> # cd /sys/kernel/tracing
> # mkdir instances/foo
> # echo snapshot > instances/foo/events/syscalls/sys_enter_fchownat/trigger
> # echo top buffer > trace_marker
> # echo foo buffer > instances/foo/trace_marker
> # touch /tmp/bar
> # chown rostedt /tmp/bar
> # cat instances/foo/snapshot
# tracer: nop
#
#
# * Snapshot is freed *
#
# Snapshot commands:
# echo 0 > snapshot : Clears and frees snapshot buffer
# echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
# Takes a snapshot of the main buffer.
# echo 2 > snapshot : Clears snapshot buffer (but does not allocate or free)
# (Doesn't have to be '2' works with any number that
# is not a '0' or '1')
> # cat snapshot
# tracer: nop
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
bash-1189 [000] .... 111.488323: tracing_mark_write: top buffer
Not only did the snapshot occur in the top level buffer, but the instance
snapshot buffer should have been allocated, and it is still free.
Cc: stable@vger.kernel.org
Fixes: 85f2b08268 ("tracing: Add basic event trigger framework")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Revert commits
92af4dcb4e ("tracing: Unify the "boot" and "mono" tracing clocks")
127bfa5f43 ("hrtimer: Unify MONOTONIC and BOOTTIME clock behavior")
7250a4047a ("posix-timers: Unify MONOTONIC and BOOTTIME clock behavior")
d6c7270e91 ("timekeeping: Remove boot time specific code")
f2d6fdbfd2 ("Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior")
d6ed449afd ("timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock")
72199320d4 ("timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock")
As stated in the pull request for the unification of CLOCK_MONOTONIC and
CLOCK_BOOTTIME, it was clear that we might have to revert the change.
As reported by several folks systemd and other applications rely on the
documented behaviour of CLOCK_MONOTONIC on Linux and break with the above
changes. After resume daemons time out and other timeout related issues are
observed. Rafael compiled this list:
* systemd kills daemons on resume, after >WatchdogSec seconds
of suspending (Genki Sky). [Verified that that's because systemd uses
CLOCK_MONOTONIC and expects it to not include the suspend time.]
* systemd-journald misbehaves after resume:
systemd-journald[7266]: File /var/log/journal/016627c3c4784cd4812d4b7e96a34226/system.journal
corrupted or uncleanly shut down, renaming and replacing.
(Mike Galbraith).
* NetworkManager reports "networking disabled" and networking is broken
after resume 50% of the time (Pavel). [May be because of systemd.]
* MATE desktop dims the display and starts the screensaver right after
system resume (Pavel).
* Full system hang during resume (me). [May be due to systemd or NM or both.]
That happens on debian and open suse systems.
It's sad, that these problems were neither catched in -next nor by those
folks who expressed interest in this change.
Reported-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Reported-by: Genki Sky <sky@genki.is>,
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
- Tom Zanussi's extended histogram work
This adds the synthetic events to have histograms from multiple event data
Adds triggers "onmatch" and "onmax" to call the synthetic events
Several updates to the histogram code from this
- Allow way to nest ring buffer calls in the same context
- Allow absolute time stamps in ring buffer
- Rewrite of filter code parsing based on Al Viro's suggestions
- Setting of trace_clock to global if TSC is unstable (on boot)
- Better OOM handling when allocating large ring buffers
- Added initcall tracepoints (consolidated initcall_debug code with them)
And other various fixes and clean ups
-----BEGIN PGP SIGNATURE-----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=91oN
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New features:
- Tom Zanussi's extended histogram work.
This adds the synthetic events to have histograms from multiple
event data Adds triggers "onmatch" and "onmax" to call the
synthetic events Several updates to the histogram code from this
- Allow way to nest ring buffer calls in the same context
- Allow absolute time stamps in ring buffer
- Rewrite of filter code parsing based on Al Viro's suggestions
- Setting of trace_clock to global if TSC is unstable (on boot)
- Better OOM handling when allocating large ring buffers
- Added initcall tracepoints (consolidated initcall_debug code with
them)
And other various fixes and clean ups"
* tag 'trace-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (68 commits)
init: Have initcall_debug still work without CONFIG_TRACEPOINTS
init, tracing: Have printk come through the trace events for initcall_debug
init, tracing: instrument security and console initcall trace events
init, tracing: Add initcall trace events
tracing: Add rcu dereference annotation for test func that touches filter->prog
tracing: Add rcu dereference annotation for filter->prog
tracing: Fixup logic inversion on setting trace_global_clock defaults
tracing: Hide global trace clock from lockdep
ring-buffer: Add set/clear_current_oom_origin() during allocations
ring-buffer: Check if memory is available before allocation
lockdep: Add print_irqtrace_events() to __warn
vsprintf: Do not preprocess non-dereferenced pointers for bprintf (%px and %pK)
tracing: Uninitialized variable in create_tracing_map_fields()
tracing: Make sure variable string fields are NULL-terminated
tracing: Add action comparisons when testing matching hist triggers
tracing: Don't add flag strings when displaying variable references
tracing: Fix display of hist trigger expressions containing timestamps
ftrace: Drop a VLA in module_exists()
tracing: Mention trace_clock=global when warning about unstable clocks
tracing: Default to using trace_global_clock if sched_clock is unstable
...
In commit 932066a15335 ("tracing: Default to using trace_global_clock if
sched_clock is unstable"), the logic for deciding to override the
default clock if unstable was reversed from the earlier posting. I was
trying to reduce the width of the message by using an early return
rather than a if-block, but reverted back to using the if-block and
accidentally left the predicate inverted.
Link: http://lkml.kernel.org/r/20180404212450.26646-1-chris@chris-wilson.co.uk
Fixes: 932066a15335 ("tracing: Default to using trace_global_clock if sched_clock is unstable")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Across suspend, we may see a very large drift in timestamps if the sched
clock is unstable, prompting the global trace's ringbuffer code to warn
and suggest switching to the global clock. Preempt this request by
detecting when the sched clock is unstable (determined during
late_initcall) and automatically switching the default clock over to
trace_global_clock.
This should prevent requiring user interaction to resolve warnings such
as:
Delta way too big! 18446743856563626466 ts=18446744054496180323 write stamp = 197932553857
If you just came from a suspend/resume,
please switch to the trace global clock:
echo global > /sys/kernel/debug/tracing/trace_clock
Link: http://lkml.kernel.org/r/20180330150132.16903-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull trivial tree updates from Jiri Kosina.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
kfifo: fix inaccurate comment
tools/thermal: tmon: fix for segfault
net: Spelling s/stucture/structure/
edd: don't spam log if no EDD information is present
Documentation: Fix early-microcode.txt references after file rename
tracing: Block comments should align the * on each line
treewide: Fix typos in printk
GenWQE: Fix a typo in two comments
treewide: Align function definition open/close braces
Unify the "boot" and "mono" tracing clocks and document the new behaviour.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20180301165150.489635255@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Allow tracing code outside of trace.c to access tracing_set_clock().
Some applications may require a particular clock in order to function
properly, such as latency calculations.
Also, add an accessor returning the current clock string.
Link: http://lkml.kernel.org/r/6d1c53e9ee2163f54e1849f5376573f54f0e6009.1516069914.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add the necessary infrastructure to allow the variables defined on one
event to be referenced in another. This allows variables set by a
previous event to be referenced and used in expressions combining the
variable values saved by that previous event and the event fields of
the current event. For example, here's how a latency can be
calculated and saved into yet another variable named 'wakeup_lat':
# echo 'hist:keys=pid,prio:ts0=common_timestamp ...
# echo 'hist:keys=next_pid:wakeup_lat=common_timestamp-$ts0 ...
In the first event, the event's timetamp is saved into the variable
ts0. In the next line, ts0 is subtracted from the second event's
timestamp to produce the latency.
Further users of variable references will be described in subsequent
patches, such as for instance how the 'wakeup_lat' variable above can
be displayed in a latency histogram.
Link: http://lkml.kernel.org/r/b1d3e6975374e34d501ff417c20189c3f9b2c7b8.1516069914.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Appending .usecs onto a common_timestamp field will cause the
timestamp value to be in microseconds instead of the default
nanoseconds. A typical latency histogram using usecs would look like
this:
# echo 'hist:keys=pid,prio:ts0=common_timestamp.usecs ...
# echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0 ...
This also adds an external trace_clock_in_ns() to trace.c for the
timestamp conversion.
Link: http://lkml.kernel.org/r/4e813705a170b3e13e97dc3135047362fb1a39f3.1516069914.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a new option flag indicating whether or not the ring buffer is in
'absolute timestamp' mode.
Currently this is only set/unset by hist triggers that make use of a
common_timestamp. As such, there's no reason to make this writeable
for users - its purpose is only to allow users to determine
unequivocally whether or not the ring buffer is in that mode (although
absolute timestamps can coexist with the normal delta timestamps, when
the ring buffer is in absolute mode, timestamps written while absolute
mode is in effect take up more space in the buffer, and are not as
efficient).
Link: http://lkml.kernel.org/r/e8aa7b1cde1cf15014e66545d06ac6ef2ebba456.1516069914.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Define a new function, tracing_set_time_stamp_abs(), which can be used
to enable or disable the use of absolute timestamps rather than time
deltas for a trace array.
Only the interface is added here; a subsequent patch will add the
underlying implementation.
Link: http://lkml.kernel.org/r/ce96119de44c7fe0ee44786d15254e9b493040d3.1516069914.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There's not much changes for the tracing system this release.
Mostly small clean ups and fixes.
The biggest change is to how bprintf works. bprintf is used by
trace_printk() to just save the format and args of a printf call,
and the formatting is done when the trace buffer is read. This is
done to keep the formatting out of the fast path (this was recommended
by you). The issue is when arguments are de-referenced.
If a pointer is saved, and the format has something like "%*pbl",
when the buffer is read, it will de-reference the argument then.
The problem is if the data no longer exists. This can cause the
kernel to oops.
The fix for this was to make these de-reference pointes do
the formatting at the time it is called (the fast path), as
this guarantees that the data exists (and doesn't change later)
-----BEGIN PGP SIGNATURE-----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=bmm/
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"There's not much changes for the tracing system this release. Mostly
small clean ups and fixes.
The biggest change is to how bprintf works. bprintf is used by
trace_printk() to just save the format and args of a printf call, and
the formatting is done when the trace buffer is read. This is done to
keep the formatting out of the fast path (this was recommended by
you). The issue is when arguments are de-referenced.
If a pointer is saved, and the format has something like "%*pbl", when
the buffer is read, it will de-reference the argument then. The
problem is if the data no longer exists. This can cause the kernel to
oops.
The fix for this was to make these de-reference pointes do the
formatting at the time it is called (the fast path), as this
guarantees that the data exists (and doesn't change later)"
* tag 'trace-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
vsprintf: Do not have bprintf dereference pointers
ftrace: Mark function tracer test functions noinline/noclone
trace_uprobe: Display correct offset in uprobe_events
tracing: Make sure the parsed string always terminates with '\0'
tracing: Clear parser->idx if only spaces are read
tracing: Detect the string nul character when parsing user input string
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
Pull RCU updates from Ingo Molnar:
"The main RCU changes in this cycle were:
- Updates to use cond_resched() instead of cond_resched_rcu_qs()
where feasible (currently everywhere except in kernel/rcu and in
kernel/torture.c). Also a couple of fixes to avoid sending IPIs to
offline CPUs.
- Updates to simplify RCU's dyntick-idle handling.
- Updates to remove almost all uses of smp_read_barrier_depends() and
read_barrier_depends().
- Torture-test updates.
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
torture: Save a line in stutter_wait(): while -> for
torture: Eliminate torture_runnable and perf_runnable
torture: Make stutter less vulnerable to compilers and races
locking/locktorture: Fix num reader/writer corner cases
locking/locktorture: Fix rwsem reader_delay
torture: Place all torture-test modules in one MAINTAINERS group
rcutorture/kvm-build.sh: Skip build directory check
rcutorture: Simplify functions.sh include path
rcutorture: Simplify logging
rcutorture/kvm-recheck-*: Improve result directory readability check
rcutorture/kvm.sh: Support execution from any directory
rcutorture/kvm.sh: Use consistent help text for --qemu-args
rcutorture/kvm.sh: Remove unused variable, `alldone`
rcutorture: Remove unused script, config2frag.sh
rcutorture/configinit: Fix build directory error message
rcutorture: Preempt RCU-preempt readers more vigorously
torture: Reduce #ifdefs for preempt_schedule()
rcu: Remove have_rcu_nocb_mask from tree_plugin.h
rcu: Add comment giving debug strategy for double call_rcu()
tracing, rcu: Hide trace event rcu_nocb_wake when not used
...
Always mark the parsed string with a terminated nul '\0' character. This removes
the need for the users to have to append the '\0' before using the parsed string.
Link: http://lkml.kernel.org/r/1516093350-12045-4-git-send-email-changbin.du@intel.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If only spaces were read while parsing the next string, then parser->idx should be
cleared in order to make trace_parser_loaded() return false.
Link: http://lkml.kernel.org/r/1516093350-12045-3-git-send-email-changbin.du@intel.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
User space can pass in a C nul character '\0' along with its input. The
function trace_get_user() will try to process it as a normal character,
and that will fail to parse.
open("/sys/kernel/debug/tracing//set_ftrace_pid", O_WRONLY|O_TRUNC) = 3
write(3, " \0", 2) = -1 EINVAL (Invalid argument)
while parse can handle spaces, so below works.
$ echo "" > set_ftrace_pid
$ echo " " > set_ftrace_pid
$ echo -n " " > set_ftrace_pid
Have the parser stop on '\0' and cease any further parsing. Only process
the characters up to the nul '\0' character and do not process it.
Link: http://lkml.kernel.org/r/1516093350-12045-2-git-send-email-changbin.du@intel.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
With the addition of ORC unwinder and FRAME POINTER unwinder, the stack
trace skipping requirements have changed.
I went through the tracing stack trace dumps with ORC and with frame
pointers and recalculated the proper values.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull RCU updates from Paul E. McKenney:
- Updates to use cond_resched() instead of cond_resched_rcu_qs()
where feasible (currently everywhere except in kernel/rcu and
in kernel/torture.c). Also a couple of fixes to avoid sending
IPIs to offline CPUs.
- Updates to simplify RCU's dyntick-idle handling.
- Updates to remove almost all uses of smp_read_barrier_depends()
and read_barrier_depends().
- Miscellaneous fixes.
- Torture-test updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jing Xia and Chunyan Zhang reported that on failing to allocate part of the
tracing buffer, memory is freed, but the pointers that point to them are not
initialized back to NULL, and later paths may try to free the freed memory
again. Jing and Chunyan fixed one of the locations that does this, but
missed a spot.
Link: http://lkml.kernel.org/r/20171226071253.8968-1-chunyan.zhang@spreadtrum.com
Cc: stable@vger.kernel.org
Fixes: 737223fbca ("tracing: Consolidate buffer allocation code")
Reported-by: Jing Xia <jing.xia@spreadtrum.com>
Reported-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Double free of the ring buffer happens when it fails to alloc new
ring buffer instance for max_buffer if TRACER_MAX_TRACE is configured.
The root cause is that the pointer is not set to NULL after the buffer
is freed in allocate_trace_buffers(), and the freeing of the ring
buffer is invoked again later if the pointer is not equal to Null,
as:
instance_mkdir()
|-allocate_trace_buffers()
|-allocate_trace_buffer(tr, &tr->trace_buffer...)
|-allocate_trace_buffer(tr, &tr->max_buffer...)
// allocate fail(-ENOMEM),first free
// and the buffer pointer is not set to null
|-ring_buffer_free(tr->trace_buffer.buffer)
// out_free_tr
|-free_trace_buffers()
|-free_trace_buffer(&tr->trace_buffer);
//if trace_buffer is not null, free again
|-ring_buffer_free(buf->buffer)
|-rb_free_cpu_buffer(buffer->buffers[cpu])
// ring_buffer_per_cpu is null, and
// crash in ring_buffer_per_cpu->pages
Link: http://lkml.kernel.org/r/20171226071253.8968-1-chunyan.zhang@spreadtrum.com
Cc: stable@vger.kernel.org
Fixes: 737223fbca ("tracing: Consolidate buffer allocation code")
Signed-off-by: Jing Xia <jing.xia@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The ring_buffer_read_page() takes care of zeroing out any extra data in the
page that it returns. There's no need to zero it out again from the
consumer. It was removed from one consumer of this function, but
read_buffers_splice_read() did not remove it, and worse, it contained a
nasty bug because of it.
Cc: stable@vger.kernel.org
Fixes: 2711ca237a ("ring-buffer: Move zeroing out excess in page to ring buffer code")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
By passing an export descriptor to the write function, users don't need to
keep a global static pointer and can rely on container_of() to fetch their
own structure.
Link: http://lkml.kernel.org/r/20170602102025.5140-1-felipe.balbi@linux.intel.com
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The default NR_CPUS can be very large, but actual possible nr_cpu_ids
usually is very small. For my x86 distribution, the NR_CPUS is 8192 and
nr_cpu_ids is 4. About 2 pages are wasted.
Most machines don't have so many CPUs, so define a array with NR_CPUS
just wastes memory. So let's allocate the buffer dynamically when need.
With this change, the mutext tracing_cpumask_update_lock also can be
removed now, which was used to protect mask_str.
Link: http://lkml.kernel.org/r/1512013183-19107-1-git-send-email-changbin.du@intel.com
Fixes: 36dfe9252b ("ftrace: make use of tracing_cpumask")
Cc: stable@vger.kernel.org
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Naming in code comments for tracing_snapshot, tracing_snapshot_alloc
and trace_pid_filter_add_remove_task don't match the real function
names. And latency_trace has been removed from tracing directory.
Fix them.
Link: http://lkml.kernel.org/r/1508394753-20887-1-git-send-email-chuhu@redhat.com
Fixes: cab5037 ("tracing/ftrace: Enable snapshot function trigger")
Fixes: 886b5b7 ("tracing: remove /debug/tracing/latency_trace")
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
[ Replaced /sys/kernel/debug/tracing with /sys/kerne/tracing ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Now that the irq path uses the rcu_nmi_{enter,exit}() algorithm,
rcu_irq_enter() and rcu_irq_exit() may be used from any context. There is
thus no need for rcu_irq_enter_disabled() and for the checks using it.
This commit therefore eliminates rcu_irq_enter_disabled().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
traceprobe_probes_write() and traceprobe_command() actually contain
nothing that ties them to kprobes - the code is generically useful for
similar types of parsing elsewhere, so separate it out and move it to
trace.c/trace.h.
Other than moving it, the only change is in naming:
traceprobe_probes_write() becomes trace_parse_run_command() and
traceprobe_command() becomes trace_run_command().
Link: http://lkml.kernel.org/r/ae5c26ea40c196a8986854d921eb6e713ede7e3f.1506105045.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In order to make future changes where we need to call
tracing_set_clock() from within an event command, the order of
trace_types_lock and event_mutex must be reversed, as the event command
will hold event_mutex and the trace_types_lock is taken from within
tracing_set_clock().
Link: http://lkml.kernel.org/r/20170921162249.0dde3dca@gandalf.local.home
Requested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When reading data from trace_pipe, tracing_wait_pipe() performs a
check to see if tracing has been turned off after some data was read.
Currently, this check always looks at global trace state, but it
should be checking the trace instance where trace_pipe is located at.
Because of this bug, cat instances/i1/trace_pipe in the following
script will immediately exit instead of waiting for data:
cd /sys/kernel/debug/tracing
echo 0 > tracing_on
mkdir -p instances/i1
echo 1 > instances/i1/tracing_on
echo 1 > instances/i1/events/sched/sched_process_exec/enable
cat instances/i1/trace_pipe
Link: http://lkml.kernel.org/r/20170917102348.1615-1-tahsin@google.com
Cc: stable@vger.kernel.org
Fixes: 10246fa35d ("tracing: give easy way to clear trace buffer")
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The mmiotrace tracer cannot be enabled with ftrace=mmiotrace in kernel
commandline. With this patch, noboot is added to the tracer struct,
and when system boot with a tracer that has noboot=true, it will print
out a warning message and continue booting.
Link: http://lkml.kernel.org/r/1505111195-31942-1-git-send-email-zsun@redhat.com
Signed-off-by: Ziqian SUN (Zamir) <zsun@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
One convenient way to erase trace is "echo > trace". However, this
is currently broken if the current tracer is irqsoff tracer. This
is because irqsoff tracer use max_buffer as the default trace
buffer.
Set the max_buffer as the one to be cleared when it's the trace
buffer currently in use.
Link: http://lkml.kernel.org/r/1505754215-29411-1-git-send-email-byan@nvidia.com
Cc: <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 4acd4d00f ("tracing: give easy way to clear trace buffer")
Signed-off-by: Bo Yan <byan@nvidia.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
