This adds some preliminary docbook bits for SH, tying in to the few
interfaces that are exposed and that have adequate kerneldoc comments.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Now that arch/ppc is gone and CONFIG_PPC_MERGE is always set, remove
the dead code associated with !CONFIG_PPC_MERGE from arch/powerpc
and include/asm-powerpc.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
total_memory is a 'phys_addr_t', Which can be either 64 or 32 bits.
Force printing as unsigned long long to silence the warning.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Explicitly cast to unsigned long long, rather than u64.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
from include/asm-powerpc. This is the result of a
mkdir arch/powerpc/include/asm
git mv include/asm-powerpc/* arch/powerpc/include/asm
Followed by a few documentation/comment fixups and a couple of places
where <asm-powepc/...> was being used explicitly. Of the latter only
one was outside the arch code and it is a driver only built for powerpc.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
We can simply wrap in to the dev_set/get_drvdata(), there's no reason
to track an extra level of private data on top of the struct device.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
These were completely inconsistent. Clean these up to take a maple_driver
pointer directly for consistency.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
When Set Hop-by-Hop options header with NULL data
pointer and optlen is not zero use setsockopt(),
the kernel successfully return 0 instead of
return error EINVAL or EFAULT.
This patch fix the problem.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
cookie_v6_check() did not call reqsk_free() if xfrm_lookup() fails,
leaking the request sock.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Have a single probe function instead of a probe and a connect function.
Also tidy a comment.
Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Allow the removal (and subsequent reinsertion) of the maple_keyb (maple
keyboard) driver by adding a working removal function.
Also tidy long lines.
Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Commit 76e6ebfb40 ("netns: add namespace
parameter to rt_cache_flush") acceses the extra2 parameter of the
ip_default_ttl ctl_table, but it is never set to a meaningful
value. When e84f84f276 ("netns: place
rt_genid into struct net") is applied, we'll oops in
rt_cache_invalidate(). Set extra2 to init_net, to avoid that.
Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Tested-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: remove write-only variables from ext4_ordered_write_end
ext4: unexport jbd2_journal_update_superblock
ext4: Cleanup whitespace and other miscellaneous style issues
ext4: improve ext4_fill_flex_info() a bit
ext4: Cleanup the block reservation code path
ext4: don't assume extents can't cross block groups when truncating
ext4: Fix lack of credits BUG() when deleting a badly fragmented inode
ext4: Fix ext4_ext_journal_restart()
ext4: fix ext4_da_write_begin error path
jbd2: don't abort if flushing file data failed
ext4: don't read inode block if the buffer has a write error
ext4: Don't allow lg prealloc list to be grow large.
ext4: Convert the usage of NR_CPUS to nr_cpu_ids.
ext4: Improve error handling in mballoc
ext4: lock block groups when initializing
ext4: sync up block and inode bitmap reading functions
ext4: Allow read/only mounts with corrupted block group checksums
ext4: Fix data corruption when writing to prealloc area
Removed duplicated include <linux/irq.h> in
arch/sh/boards/mach-se/7343/irq.c.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Removed duplicated include <linux/delay.h> in
arch/sh/boards/board-ap325rxa.c.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Compiling pcm990 produces an error:
In file included from arch/arm/mach-pxa/pcm990-baseboard.c:25:
include/linux/ide.h:645: error: 'CONFIG_IDE_MAX_HWIFS' undeclared here (not in a function)
Fix it by removing unneeded header include.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
drivers/video/console/promcon.c:158: error: implicit declaration of
function 'con_protect_unimap'
Introduced by commit a29ccf6f82
("embedded: fix vc_translate operator precedence").
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
If a netdevice does not support hardware GSO, allowing the stack to
use GSO anyway and then splitting the GSO skb into MSS-sized pieces
as it is handed to the netdevice for transmitting is likely still
a win as far as throughput and/or CPU usage are concerned, since it
reduces the number of trips through the output path.
This patch enables the use of GSO on any netdevice that supports SG.
If a GSO skb is then sent to a netdevice that supports SG but does not
support hardware GSO, net/core/dev.c:dev_hard_start_xmit() will take
care of doing the necessary GSO segmentation in software.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
When pneigh entries exist, but the user's read buffer isn't sufficient to
hold them all, one of the pneigh entries will be missing from the results.
In neigh_get_idx_any, the number of elements which neigh_get_idx
encountered is not correctly subtracted from the position number before
the call to pneigh_get_idx. neigh_get_idx reduces the position by 1 for
each call to neigh_get_next, but it does not reduce it by one for the
first element (neigh_get_first). The patch alters the neigh_get_idx and
pneigh_get_idx functions to subtract one from pos, for the first element,
when pos is non-zero.
Signed-off-by: Chris Larson <clarson@mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
neigh_seq_next won't be called both with *pos > 0 && v ==
SEQ_START_TOKEN, so there's no point calling neigh_get_idx when we're
on the start token, just call neigh_get_first directly.
Signed-off-by: Chris Larson <clarson@mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is the only legal environment in which this can be
used.
Add some commentary explaining the situation.
Signed-off-by: David S. Miller <davem@davemloft.net>
Based upon a bug report by Jeff Kirsher.
Don't use qdisc_root_lock() in these cases as the root
qdisc could have been changed, and we'd thus lock the
wrong object.
Tested by Emil S Tantilov who confirms that this seems
to fix the problem.
Signed-off-by: David S. Miller <davem@davemloft.net>
The variables 'from' and 'to' are not used anywhere.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The following build error was caused by an obvious typo:
<-- snip -->
...
LD arch/sh/mm/built-in.o
make[2]: *** No rule to make target `arch/sh/boards/board-shmin..o', needed by `arch/sh/boards/built-in.o'. Stop.
<-- snip -->
Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
No file should be explicitly referencing its own platform headers
by specifying an absolute include path. Fix these paths to use
standard <asm/arch/...> includes.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Move platform independent header files to arch/arm/include/asm, leaving
those in asm/arch* and asm/plat* alone.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Fix both the IHEX firmware generation (len field always null, and EOF
marker a byte too short) and loading (struct ihex_binrec needs to be
packed to reflect the on-disk structure).
Signed-off-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* git://git.infradead.org/users/dwmw2/random-2.6:
[MTD] Fix !CONFIG_BLOCK compile for mtdsuper.c
firmware: silence __fw_modbuild and __fw_modinst 'Nothing to be done' messages
FAT has to handle the newly introduced ATTR_TIMES_SET for allow_utime
option.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Brian Wang reported that a FUSE filesystem exported through NFS could
return I/O errors on read. This was traced to splice_direct_to_actor()
returning a short or zero count when racing with page invalidation.
However this is not FUSE or NFSD specific, other filesystems (notably
NFS) also call invalidate_inode_pages2() to purge stale data from the
cache.
If this happens while such pages are sitting in a pipe buffer, then
splice(2) from the pipe can return zero, and read(2) from the pipe can
return ENODATA.
The zero return is especially bad, since it implies end-of-file or
disconnected pipe/socket, and is documented as such for splice. But
returning an error for read() is also nasty, when in fact there was no
error (data becoming stale is not an error).
The same problems can be triggered by "hole punching" with
madvise(MADV_REMOVE).
Fix this by not clearing the PG_uptodate flag on truncation and
invalidation.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The driver was not so bad at big endian at all, only the optimised fifo
read/write functions need a fix, with this fix the driver works on
a pegasus PPC machine.
Signed-off-by: Karsten Keil <kkeil@suse.de>
The channelmap should have the same size on 32 and 64 bit systems
and should not depend on endianess.
Thanks to David Woodhouse for spotting this.
Signed-off-by: Karsten Keil <kkeil@suse.de>
rt2x00usb_vendor_request_large_buff is write-only, so it is
safe to make the argument a const.
Fixes compile warning:
drivers/net/wireless/rt2x00/rt73usb.c: In function 'rt73usb_load_firmware':
drivers/net/wireless/rt2x00/rt73usb.c:916: warning: passing argument 5 of 'rt2x00usb_vendor_request_large_buff' discards qualifiers from pointer target typ
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As reported by Adrian Bunk, commit d5686b444f
(switch mtd and dm-table to lookup_bdev()) causes the following compile
error with CONFIG_BLOCK=n:
CC drivers/mtd/mtdsuper.o
drivers/mtd/mtdsuper.c: In function `get_sb_mtd':
drivers/mtd/mtdsuper.c:184: error: implicit declaration of function 'lookup_bdev'
drivers/mtd/mtdsuper.c:184: warning: assignment makes pointer from integer without a cast
drivers/mtd/mtdsuper.c:197: error: implicit declaration of function 'bdput'
make[3]: *** [drivers/mtd/mtdsuper.o] Error 1
Fix it by putting the block device lookup inside #ifdef CONFIG_BLOCK
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
People don't like them and think they're errors.
Leave the __fw_install one though; when 'make firmware_install' does
nothing, it's best to have a 'Nothing to be done for...' message rather
than just doing nothing.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Commit f15cbe6f1a
(sh: migrate to arch/sh/include/) moved KBUILD_CFLAGS
(which is used by LIBGCC) below LIBGCC, causing build
errors like the following:
<-- snip -->
...
LD .tmp_vmlinux1
arch/sh/kernel/built-in.o: In function `module_clk_recalc':
clock-sh4.c:(.text+0x80f0): undefined reference to `__udivsi3_i4i'
...
make[1]: *** [.tmp_vmlinux1] Error 1
<-- snip -->
Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This ended up causing build breakage on O= builds, as reported by Adrian:
<-- snip -->
...
CC init/main.o
In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/irq.h:4,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/irq.h:23,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/hardirq.h:5,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/hardirq.h:7,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/asm-generic/local.h:5,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/local.h:4,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/module.h:19,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/init/main.c:13:
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/machvec.h:15:27:
error: asm/machtypes.h: No such file or directory
make[2]: *** [init/main.o] Error 1
<-- snip -->
So we simply move machtypes.h back to its original place. asm-offsets.h is
still generated there regardless, until such a time that we find a better place
to stash auto-generated files.
Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This fixes a bug in operator precedence in the newly introduced vc_translate
macro. Without this fix, the translation of some characters on the
kernel console is garbled.
This patch was copied to the e-mail list previously for testing. Now,
all reports confirm that it works, so this is an official post for
application.
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Delete 2 EXPORTs that were accidentally sent upstream.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I asked legal about the licensing of ftrace.txt, and they told me that,
unless the Documentation directory is specifically set up to handle non
GPL licenses (which it does not appear to be), then it would be best to
put ftrace.txt under the GPL.
This patch adds a dual license to ftrace.txt such that it is under both
the FDL and the GPL.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
