Commit Graph

41 Commits

Author SHA1 Message Date
Scott Mayhew
ce52914eb7 sunrpc: move NO_CRKEY_TIMEOUT to the auth->au_flags
A generic_cred can be used to look up a unx_cred or a gss_cred, so it's
not really safe to use the the generic_cred->acred->ac_flags to store
the NO_CRKEY_TIMEOUT flag.  A lookup for a unx_cred triggered while the
KEY_EXPIRE_SOON flag is already set will cause both NO_CRKEY_TIMEOUT and
KEY_EXPIRE_SOON to be set in the ac_flags, leaving the user associated
with the auth_cred to be in a state where they're perpetually doing 4K
NFS_FILE_SYNC writes.

This can be reproduced as follows:

1. Mount two NFS filesystems, one with sec=krb5 and one with sec=sys.
They do not need to be the same export, nor do they even need to be from
the same NFS server.  Also, v3 is fine.
$ sudo mount -o v3,sec=krb5 server1:/export /mnt/krb5
$ sudo mount -o v3,sec=sys server2:/export /mnt/sys

2. As the normal user, before accessing the kerberized mount, kinit with
a short lifetime (but not so short that renewing the ticket would leave
you within the 4-minute window again by the time the original ticket
expires), e.g.
$ kinit -l 10m -r 60m

3. Do some I/O to the kerberized mount and verify that the writes are
wsize, UNSTABLE:
$ dd if=/dev/zero of=/mnt/krb5/file bs=1M count=1

4. Wait until you're within 4 minutes of key expiry, then do some more
I/O to the kerberized mount to ensure that RPC_CRED_KEY_EXPIRE_SOON gets
set.  Verify that the writes are 4K, FILE_SYNC:
$ dd if=/dev/zero of=/mnt/krb5/file bs=1M count=1

5. Now do some I/O to the sec=sys mount.  This will cause
RPC_CRED_NO_CRKEY_TIMEOUT to be set:
$ dd if=/dev/zero of=/mnt/sys/file bs=1M count=1

6. Writes for that user will now be permanently 4K, FILE_SYNC for that
user, regardless of which mount is being written to, until you reboot
the client.  Renewing the kerberos ticket (assuming it hasn't already
expired) will have no effect.  Grabbing a new kerberos ticket at this
point will have no effect either.

Move the flag to the auth->au_flags field (which is currently unused)
and rename it slightly to reflect that it's no longer associated with
the auth_cred->ac_flags.  Add the rpc_auth to the arg list of
rpcauth_cred_key_to_expire and check the au_flags there too.  Finally,
add the inode to the arg list of nfs_ctx_key_to_expire so we can
determine the rpc_auth to pass to rpcauth_cred_key_to_expire.

Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-07-19 16:23:24 -04:00
Jeff Layton
3c6e0bc8a1 sunrpc: plumb gfp_t parm into crcreate operation
We need to be able to call the generic_cred creator from different
contexts. Add a gfp_t parm to the crcreate operation and to
rpcauth_lookup_credcache. For now, we just push the gfp_t parms up
one level to the *_lookup_cred functions.

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-09 09:05:40 -04:00
Chuck Lever
4500632f60 nfsd: Lower NFSv4.1 callback message size limit
The maximum size of a backchannel message on RPC-over-RDMA depends
on the connection's inline threshold. Today that threshold is
typically 1024 bytes, making the maximum message size 996 bytes.

The Linux server's CREATE_SESSION operation checks that the size
of callback Calls can be as large as 1044 bytes, to accommodate
RPCSEC_GSS. Thus CREATE_SESSION fails if a client advertises the
true message size maximum of 996 bytes.

But the server's backchannel currently does not support RPCSEC_GSS.
The actual maximum size it needs is much smaller. It is safe to
reduce the limit to enable NFSv4.1 on RDMA backchannel operation.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-01 13:06:35 -08:00
Jeff Layton
24a9a9610c sunrpc: increase UNX_MAXNODENAME from 32 to __NEW_UTS_LEN bytes
The current limit of 32 bytes artificially limits the name string that
we end up stuffing into NFSv4.x client ID blobs. If you have multiple
hosts with long hostnames that only differ near the end, then this can
cause NFSv4 client ID collisions.

Linux nodenames are actually limited to __NEW_UTS_LEN bytes (64), so use
that as the limit instead. Also, use XDR_QUADLEN to specify the slack
length, just for clarity and in case someone in the future changes this
to something not evenly divisible by 4.

Reported-by: Michael Skralivetsky <michael.skralivetsky@primarydata.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-08-12 14:31:04 -04:00
Jeff Layton
f895b252d4 sunrpc: eliminate RPC_DEBUG
It's always set to whatever CONFIG_SUNRPC_DEBUG is, so just use that.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-24 17:31:46 -05:00
Andy Adamson
35fa5f7b35 SUNRPC refactor rpcauth_checkverf error returns
Most of the time an error from the credops crvalidate function means the
server has sent us a garbage verifier. The gss_validate function is the
exception where there is an -EACCES case if the user GSS_context on the client
has expired.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-09-03 15:25:09 -04:00
Trond Myklebust
c219066103 SUNRPC: Replace clnt->cl_principal
The clnt->cl_principal is being used exclusively to store the service
target name for RPCSEC_GSS/krb5 callbacks. Replace it with something that
is stored only in the RPCSEC_GSS-specific code.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-30 09:19:36 -04:00
Eric W. Biederman
a570abbb96 sunrpc: Properly encode kuids and kgids in RPC_AUTH_UNIX credentials
When writing kuids onto the wire first map them into the initial user
namespace.

When writing kgids onto the wire first map them into the initial user
namespace.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 06:15:24 -08:00
Eric W. Biederman
e572fc7398 sunrpc: Use gid_valid to test for gid != INVALID_GID
In auth unix there are a couple of places INVALID_GID is used a
sentinel to mark the end of uc_gids array.  Use gid_valid
as a type safe way to verify we have not hit the end of
valid data in the array.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 06:15:20 -08:00
Eric W. Biederman
cdba321e29 sunrpc: Convert kuids and kgids to uids and gids for printing
When printing kuids and kgids for debugging purpropses convert them
to ordinary integers so their values can be fed to the oridnary
print functions.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 06:15:19 -08:00
Eric W. Biederman
9132adb021 sunrpc: Simplify auth_unix now that everything is a kgid_t
In unx_create_cred directly assign gids from acred->group_info
to cred->uc_gids.

In unx_match directly compare uc_gids with group_info.

Now that both group_info and unx_cred gids are stored as kgids
this is valid and the extra layer of translation can be removed.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 06:15:18 -08:00
Eric W. Biederman
0b4d51b02a sunrpc: Use uid_eq and gid_eq where appropriate
When comparing uids use uid_eq instead of ==.
When comparing gids use gid_eq instead of ==.

And unfortunate cost of type safety.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 06:15:17 -08:00
Eric W. Biederman
7eaf040b72 sunrpc: Use kuid_t and kgid_t where appropriate
Convert variables that store uids and gids to be of type
kuid_t and kgid_t instead of type uid_t and gid_t.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 06:15:16 -08:00
Eric W. Biederman
bf37f79437 sunrpc: Use userns friendly constants.
Instead of (uid_t)0 use GLOBAL_ROOT_UID.
Instead of (gid_t)0 use GLOBAL_ROOT_GID.
Instead of (uid_t)-1 use INVALID_UID
Instead of (gid_t)-1 use INVALID_GID.
Instead of NOGROUP use INVALID_GID.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 06:15:15 -08:00
Eric W. Biederman
ae2975bc34 userns: Convert group_info values from gid_t to kgid_t.
As a first step to converting struct cred to be all kuid_t and kgid_t
values convert the group values stored in group_info to always be
kgid_t values.   Unless user namespaces are used this change should
have no effect.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-05-03 03:27:21 -07:00
NeilBrown
dc6f55e9f8 NFS/sunrpc: don't use a credential with extra groups.
The sunrpc layer keeps a cache of recently used credentials and
'unx_match' is used to find the credential which matches the current
process.

However unx_match allows a match when the cached credential has extra
groups at the end of uc_gids list which are not in the process group list.

So if a process with a list of (say) 4 group accesses a file and gains
access because of the last group in the list, then another process
with the same uid and gid, and a gid list being the first tree of the
gids of the original process tries to access the file, it will be
granted access even though it shouldn't as the wrong rpc credential
will be used.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
2011-10-25 11:20:58 +02:00
Trond Myklebust
a17c2153d2 SUNRPC: Move the bound cred to struct rpc_rqst
This will allow us to save the original generic cred in rpc_message, so
that if we migrate from one server to another, we can generate a new bound
cred without having to punt back to the NFS layer.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-04 08:54:09 -04:00
Trond Myklebust
5d8d9a4d9f NFS: Ensure the AUTH_UNIX credcache is allocated dynamically
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-04 08:52:57 -04:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Trond Myklebust
0f38b873ae SUNRPC: Use GFP_NOFS when allocating credentials
Since the credentials may be allocated during the call to rpc_new_task(),
which again may be called by a memory allocator...

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-09 12:08:48 -04:00
Trond Myklebust
78ea323be6 NFSv4: Don't use cred->cr_ops->cr_name in nfs4_proc_setclientid()
With the recent change to generic creds, we can no longer use
cred->cr_ops->cr_name to distinguish between RPCSEC_GSS principals and
AUTH_SYS/AUTH_NULL identities. Replace it with the rpc_authops->au_name
instead...

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-04-19 16:54:53 -04:00
Trond Myklebust
5c691044ec SUNRPC: Add an rpc_credop callback for binding a credential to an rpc_task
We need the ability to treat 'generic' creds specially, since they want to
bind instances of the auth cred instead of binding themselves.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-03-14 13:42:41 -04:00
Trond Myklebust
af09383577 SUNRPC: Fix RPCAUTH_LOOKUP_ROOTCREDS
The current RPCAUTH_LOOKUP_ROOTCREDS flag only works for AUTH_SYS
authentication, and then only as a special case in the code. This patch
removes the auth_sys special casing, and replaces it with generic code.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-03-14 13:42:32 -04:00
Trond Myklebust
1be27f3660 SUNRPC: Remove the tk_auth macro...
We should almost always be deferencing the rpc_auth struct by means of the
credential's cr_auth field instead of the rpc_clnt->cl_auth anyway. Fix up
that historical mistake, and remove the macro that propagated it.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10 23:40:37 -04:00
Trond Myklebust
f5c2187cfe SUNRPC: Convert the credential garbage collector into a shrinker callback
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10 23:40:36 -04:00
Trond Myklebust
9499b4341b SUNRPC: Give credential cache a local spinlock
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10 23:40:36 -04:00
Trond Myklebust
31be5bf15f SUNRPC: Convert the credcache lookup code to use RCU
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10 23:40:36 -04:00
Trond Myklebust
fc432dd907 SUNRPC: Enforce atomic updates of rpc_cred->cr_flags
Convert to the use of atomic bitops...

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10 23:40:35 -04:00
Trond Myklebust
696e38df9d SUNRPC: replace casts in auth_unix.c with container_of()
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10 23:40:35 -04:00
Trond Myklebust
5fe4755e25 SUNRPC: Clean up rpc credential initialisation
Add a helper rpc_cred_init()

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10 23:40:35 -04:00
Trond Myklebust
f1c0a86150 SUNRPC: Mark auth and cred operation tables as constant.
Also do the same for gss_api operation tables.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10 23:40:34 -04:00
Trond Myklebust
5c9cfc828a SUNRPC: Fix a typo in unx_create()
We want to set the unix_cred_cache.nextgc on the first call to
unx_create(), which should be when unix_auth.au_count === 1

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10 23:40:33 -04:00
Trond Myklebust
3ab9bb7243 SUNRPC: Fix a memory leak in the auth credcache code
The leak only affects the RPCSEC_GSS caches, since they are the only ones
that are dynamically allocated...
Rename the existing rpcauth_free_credcache() to rpcauth_clear_credcache()
in order to better describe its role, then add a new function
rpcauth_destroy_credcache() that actually frees the cache in addition to
clearing it out.

Also move the call to destroy the credcache in gss_destroy() to come before
the rpc upcall pipe is unlinked.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10 23:40:33 -04:00
Trond Myklebust
4a8c1344dc SUNRPC: Add a backpointer from the struct rpc_cred to the rpc_auth
Cleans up an issue whereby rpcsec_gss uses the rpc_clnt->cl_auth. If we want
to be able to add several rpc_auths to a single rpc_clnt, then this abuse
must go.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10 23:40:31 -04:00
Chuck Lever
46121cf7d8 SUNRPC: fix print format for tk_pid
The tk_pid field is an unsigned short.  The proper print format specifier for
that type is %5u, not %4d.

Also clean up some miscellaneous print formatting nits.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-02-03 15:35:10 -08:00
Alexey Dobriyan
d8ed029d60 [SUNRPC]: trivial endianness annotations
pure s/u32/__be32/

[AV: large part based on Alexey's patches]

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28 18:01:21 -07:00
Trond Myklebust
81039f1f20 NFS: Display the chosen RPCSEC_GSS security flavour in /proc/mounts
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-06-09 09:34:34 -04:00
Trond Myklebust
8a3177604b SUNRPC: Fix a lock recursion in the auth_gss downcall
When we look up a new cred in the auth_gss downcall so that we can stuff
 the credcache, we do not want that lookup to queue up an upcall in order
 to initialise it. To do an upcall here not only redundant, but since we
 are already holding the inode->i_mutex, it will trigger a lock recursion.

 This patch allows rpcauth cache searches to indicate that they can cope
 with uninitialised credentials.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-02-01 12:52:23 -05:00
Kris Katterjohn
8b3a70058b [NET]: Remove more unneeded typecasts on *malloc()
This removes more unneeded casts on the return value for kmalloc(),
sock_kmalloc(), and vmalloc().

Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-11 16:32:14 -08:00
Chuck Lever
86b9f57dfd [PATCH] RPC: Eliminate socket.h includes in RPC client
Clean-up: get rid of unnecessary socket.h and in.h includes in the generic
 parts of the RPC client.

 Test-plan:
 Compile kernel with CONFIG_NFS enabled.

 Version: Thu, 11 Aug 2005 16:06:23 -0400

 Signed-off-by: Chuck Lever <cel@netapp.com>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23 12:38:23 -04:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00