Commit Graph

5517 Commits

Author SHA1 Message Date
Linus Torvalds
cfeafd9466 Driver core / kernfs changes for 6.0-rc1
Here is the set of driver core and kernfs changes for 6.0-rc1.
 
 "biggest" thing in here is some scalability improvements for kernfs for
 large systems.  Other than that, included in here are:
 	- arch topology and cache info changes that have been reviewed
 	  and discussed a lot.
 	- potential error path cleanup fixes
 	- deferred driver probe cleanups
 	- firmware loader cleanups and tweaks
 	- documentation updates
 	- other small things
 
 All of these have been in the linux-next tree for a while with no
 reported problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYuqCnw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ym/JgCcCnaycJY00ZPRQm3LQCyzfJ0HgqoAn2qxGV+K
 NKycLeXZSnuvIA87dycE
 =/4Jk
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core / kernfs updates from Greg KH:
 "Here is the set of driver core and kernfs changes for 6.0-rc1.

  The "biggest" thing in here is some scalability improvements for
  kernfs for large systems. Other than that, included in here are:

   - arch topology and cache info changes that have been reviewed and
     discussed a lot.

   - potential error path cleanup fixes

   - deferred driver probe cleanups

   - firmware loader cleanups and tweaks

   - documentation updates

   - other small things

  All of these have been in the linux-next tree for a while with no
  reported problems"

* tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (63 commits)
  docs: embargoed-hardware-issues: fix invalid AMD contact email
  firmware_loader: Replace kmap() with kmap_local_page()
  sysfs docs: ABI: Fix typo in comment
  kobject: fix Kconfig.debug "its" grammar
  kernfs: Fix typo 'the the' in comment
  docs: driver-api: firmware: add driver firmware guidelines. (v3)
  arch_topology: Fix cache attributes detection in the CPU hotplug path
  ACPI: PPTT: Leave the table mapped for the runtime usage
  cacheinfo: Use atomic allocation for percpu cache attributes
  drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist
  MAINTAINERS: Change mentions of mpm to olivia
  docs: ABI: sysfs-devices-soc: Update Lee Jones' email address
  docs: ABI: sysfs-class-pwm: Update Lee Jones' email address
  Documentation/process: Add embargoed HW contact for LLVM
  Revert "kernfs: Change kernfs_notify_list to llist."
  ACPI: Remove the unused find_acpi_cpu_cache_topology()
  arch_topology: Warn that topology for nested clusters is not supported
  arch_topology: Add support for parsing sockets in /cpu-map
  arch_topology: Set cluster identifier in each core/thread from /cpu-map
  arch_topology: Limit span of cpu_clustergroup_mask()
  ...
2022-08-04 11:31:20 -07:00
Linus Torvalds
a771ea6413 Power management updates for 5.20-rc1
- Make cpufreq_show_cpus() more straightforward (Viresh Kumar).
 
  - Drop unnecessary CPU hotplug locking from store() used by cpufreq
    sysfs attributes (Viresh Kumar).
 
  - Make the ACPI cpufreq driver support the boost control interface on
    Zhaoxin/Centaur processors (Tony W Wang-oc).
 
  - Print a warning message on attempts to free an active cpufreq policy
    which should never happen (Viresh Kumar).
 
  - Fix grammar in the Kconfig help text for the loongson2 cpufreq
    driver (Randy Dunlap).
 
  - Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq
    governor (Zhao Liu).
 
  - Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll
    cpuidle driver (Eiichi Tsukata).
 
  - Modify intel_idle to treat C1 and C1E as independent idle states on
    Sapphire Rapids (Artem Bityutskiy).
 
  - Extend support for wakeirq to callback wrappers used during system
    suspend and resume (Ulf Hansson).
 
  - Defer waiting for device probe before loading a hibernation image
    till the first actual device access to avoid possible deadlocks
    reported by syzbot (Tetsuo Handa).
 
  - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
    Helgaas).
 
  - Add Raptor Lake-P to the list of processors supported by the Intel
    RAPL driver (George D Sworo).
 
  - Add Alder Lake-N and Raptor Lake-P to the list of processors for
    which Power Limit4 is supported in the Intel RAPL driver (Sumeet
    Pawnikar).
 
  - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
    attempting to remove it (Hsin-Yi Wang).
 
  - Change the Energy Model code to represent power in micro-Watts and
    adjust its users accordingly (Lukasz Luba).
 
  - Add new devfreq driver for Mediatek CCI (Cache Coherent
    Interconnect) (Johnson Wang).
 
  - Convert the Samsung Exynos SoC Bus bindings to DT schema of
    exynos-bus.c (Krzysztof Kozlowski).
 
  - Address kernel-doc warnings by adding the description for unused
    fucntion parameters in devfreq core (Mauro Carvalho Chehab).
 
  - Use NULL to pass a null pointer rather than zero according to the
    function propotype in imx-bus.c (Colin Ian King).
 
  - Print error message instead of error interger value in
    tegra30-devfreq.c (Dmitry Osipenko).
 
  - Add checks to prevent setting negative frequency QoS limits for
    CPUs (Shivnandan Kumar).
 
  - Update the pm-graph suite of utilities to the latest revision 5.9
    including multiple improvements (Todd Brandt).
 
  - Drop pme_interrupt reference from the PCI power management
    documentation (Mario Limonciello).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmLoKy8SHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRx3+oQAJNVU+W14EaRPWXQRMuwBC5zk3hb6T9q
 JqmMd8coEd+9/4ABAeRAWso1B26rUzB6JyBvw3lGH9OXInpYmvnJEhEPrTpK2h0D
 U9HxEARuGJolrDm0X9NAkn7tKKMC9GnvPS9z2s7s+N97VFFWC/QiU+PHB0SypGNb
 JxRfbVJZQCuxmNG9UeK+xeHFQ9lM2Z9ZdTxR71G0n7nQPPR+sUvnFufFby3Aogf3
 XnBYfia+YNqkUlefxxwB5a0cFwPXOUGsQkIf4d64gZnq1TgZ+71kht1GEF08PDFl
 wV8v1rOWuXEae8dozuf5xszp/eVyAqzgB+IShT9APREOO3Wg6I16XdBm8R1TGwCK
 JTdZqnm6HVKBNqchEwYViJILX69rrNUT+AwHBWhtKKDNh3qeTuwi/JGTeDVN++en
 xf3TNKx3LV31Nq6nWJFzDGLehfZMnAPkhfYohUBI7FNyblpk4mJRVcZ0bYI7UNnS
 als77uoipvb5KdFCtdhxYBHd/y867NvXKa1qsAuDxusAsfJHf4SnlMdbgOepBH2y
 jJg06CGrMDU3TZ8BL+WpqUYk4irQnAMs/159Txh7A6/dOnTjE7S9NHrENCwmt2og
 FrHSLH1eLX6Sa4RSibiGHPC7mNULP2/TOtryf3zFdlIVcjm3NEU3bnfzx7nlJn05
 8t6ObMxgMhWT
 =XeLV
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These are mostly minor improvements all over including new CPU IDs for
  the Intel RAPL driver, an Energy Model rework to use micro-Watt as the
  power unit, cpufreq fixes and cleanus, cpuidle updates, devfreq
  updates, documentation cleanups and a new version of the pm-graph
  suite of utilities.

  Specifics:

   - Make cpufreq_show_cpus() more straightforward (Viresh Kumar).

   - Drop unnecessary CPU hotplug locking from store() used by cpufreq
     sysfs attributes (Viresh Kumar).

   - Make the ACPI cpufreq driver support the boost control interface on
     Zhaoxin/Centaur processors (Tony W Wang-oc).

   - Print a warning message on attempts to free an active cpufreq
     policy which should never happen (Viresh Kumar).

   - Fix grammar in the Kconfig help text for the loongson2 cpufreq
     driver (Randy Dunlap).

   - Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq
     governor (Zhao Liu).

   - Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll
     cpuidle driver (Eiichi Tsukata).

   - Modify intel_idle to treat C1 and C1E as independent idle states on
     Sapphire Rapids (Artem Bityutskiy).

   - Extend support for wakeirq to callback wrappers used during system
     suspend and resume (Ulf Hansson).

   - Defer waiting for device probe before loading a hibernation image
     till the first actual device access to avoid possible deadlocks
     reported by syzbot (Tetsuo Handa).

   - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
     Helgaas).

   - Add Raptor Lake-P to the list of processors supported by the Intel
     RAPL driver (George D Sworo).

   - Add Alder Lake-N and Raptor Lake-P to the list of processors for
     which Power Limit4 is supported in the Intel RAPL driver (Sumeet
     Pawnikar).

   - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
     attempting to remove it (Hsin-Yi Wang).

   - Change the Energy Model code to represent power in micro-Watts and
     adjust its users accordingly (Lukasz Luba).

   - Add new devfreq driver for Mediatek CCI (Cache Coherent
     Interconnect) (Johnson Wang).

   - Convert the Samsung Exynos SoC Bus bindings to DT schema of
     exynos-bus.c (Krzysztof Kozlowski).

   - Address kernel-doc warnings by adding the description for unused
     function parameters in devfreq core (Mauro Carvalho Chehab).

   - Use NULL to pass a null pointer rather than zero according to the
     function propotype in imx-bus.c (Colin Ian King).

   - Print error message instead of error interger value in
     tegra30-devfreq.c (Dmitry Osipenko).

   - Add checks to prevent setting negative frequency QoS limits for
     CPUs (Shivnandan Kumar).

   - Update the pm-graph suite of utilities to the latest revision 5.9
     including multiple improvements (Todd Brandt).

   - Drop pme_interrupt reference from the PCI power management
     documentation (Mario Limonciello)"

* tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
  powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P
  PM: QoS: Add check to make sure CPU freq is non-negative
  PM: hibernate: defer device probing when resuming from hibernation
  intel_idle: make SPR C1 and C1E be independent
  cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask
  cpufreq: loongson2: fix Kconfig "its" grammar
  pm-graph v5.9
  cpufreq: Warn users while freeing active policy
  cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1
  firmware: arm_scmi: Get detailed power scale from perf
  Documentation: EM: Switch to micro-Watts scale
  PM: EM: convert power field to micro-Watts precision and align drivers
  PM / devfreq: tegra30: Add error message for devm_devfreq_add_device()
  PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero
  PM / devfreq: shut up kernel-doc warnings
  dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema
  PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver
  dt-bindings: interconnect: Add MediaTek CCI dt-bindings
  PM: domains: Ensure genpd_debugfs_dir exists before remove
  PM: runtime: Extend support for wakeirq for force_suspend|resume
  ...
2022-08-02 11:17:00 -07:00
Linus Torvalds
2e7a95156d regmap: Updates for v5.20
The big thing this release is a big cleanup of the interrupt code from
 Aidan MacDonald, plus a few new API updates:
 
  - Rework of the interrupt code, making it much simpler and easier to
    extend.
  - Support for device specific update bits operations with devices that
    otherwise use bitstream interfaces.
  - Support for bit operations on fields as well as whole registers.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmLnvh0ACgkQJNaLcl1U
 h9DlbQf/RELySinbi6WTIthuigJTfQq7xFIrR3LsEIrLWTuKsb+mBtxPkv0sAUF4
 lmTtxmixtCAp3z2xWLXTw99dxDcII49YPmR1TzKZ9vBsK0vkAof6t7BQyhFoICpy
 cbGdw4Mqi3qOHHeDH3obNbYhz1IwWL47Q0eASkNyaHrrnxykIyjeJ0TTURoVWJpX
 FEzGwvFtH4+5w3yc0aE+WvjzHXgPj/xAsyE835TF9jv8cW9a2/KAYPLo7gW+icaz
 Qx4JrmwMBuxzJEuaRvx2dxtasDCZKPFyod1cKS2gTpF4OnNKHocDwC3cSoGDLztr
 BRljUV3VfWzOB8DdeAaB5XQM8LJeiw==
 =talc
 -----END PGP SIGNATURE-----

Merge tag 'regmap-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
 "The big thing this release is a big cleanup of the interrupt code from
  Aidan MacDonald, plus a few new API updates:

   - Rework of the interrupt code, making it much simpler and easier to
     extend

   - Support for device specific update bits operations with devices
     that otherwise use bitstream interfaces

   - Support for bit operations on fields as well as whole registers"

* tag 'regmap-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: permit to set reg_update_bits with bulk implementation
  regmap: add WARN_ONCE when invalid mask is provided to regmap_field_init()
  regmap-irq: Fix bug in regmap_irq_get_irq_reg_linear()
  regmap: cache: Add extra parameter check in regcache_init
  regmap-irq: Deprecate the not_fixed_stride flag
  regmap-irq: Add get_irq_reg() callback
  regmap-irq: Fix inverted handling of unmask registers
  regmap-irq: Deprecate type registers and virtual registers
  regmap-irq: Introduce config registers for irq types
  regmap-irq: Refactor checks for status bulk read support
  regmap-irq: Remove mask_writeonly and regmap_irq_update_bits()
  regmap-irq: Remove inappropriate uses of regmap_irq_update_bits()
  regmap-irq: Remove an unnecessary restriction on type_in_mask
  regmap-irq: Cleanup sizeof(...) use in memory allocation
  regmap-irq: Remove unused type_reg_stride field
  regmap-irq: Convert bool bitfields to unsigned int
  regmap: Don't warn about cache only mode for devices with no cache
  regmap: provide regmap_field helpers for simple bit operations
  regmap: cache: Fix syntax errors in comments
2022-08-02 10:12:25 -07:00
Rafael J. Wysocki
954a83fc60 Merge branches 'pm-core', 'pm-sleep', 'powercap', 'pm-domains' and 'pm-em'
Merge core device power management changes for v5.20-rc1:

 - Extend support for wakeirq to callback wrappers used during system
   suspend and resume (Ulf Hansson).

 - Defer waiting for device probe before loading a hibernation image
   till the first actual device access to avoid possible deadlocks
   reported by syzbot (Tetsuo Handa).

 - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
   Helgaas).

 - Add Raptor Lake-P to the list of processors supported by the Intel
   RAPL driver (George D Sworo).

 - Add Alder Lake-N and Raptor Lake-P to the list of processors for
   which Power Limit4 is supported in the Intel RAPL driver (Sumeet
   Pawnikar).

 - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
   attempting to remove it (Hsin-Yi Wang).

 - Change the Energy Model code to represent power in micro-Watts and
   adjust its users accordingly (Lukasz Luba).

* pm-core:
  PM: runtime: Extend support for wakeirq for force_suspend|resume

* pm-sleep:
  PM: hibernate: defer device probing when resuming from hibernation
  PM: wakeup: Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP

* powercap:
  powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P
  powercap: intel_rapl: Add support for RAPTORLAKE_P

* pm-domains:
  PM: domains: Ensure genpd_debugfs_dir exists before remove

* pm-em:
  cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1
  firmware: arm_scmi: Get detailed power scale from perf
  Documentation: EM: Switch to micro-Watts scale
  PM: EM: convert power field to micro-Watts precision and align drivers
2022-07-29 19:33:13 +02:00
Fabio M. De Francesco
f2d57765b7 firmware_loader: Replace kmap() with kmap_local_page()
The use of kmap() is being deprecated in favor of kmap_local_page().

Two main problems with kmap(): (1) It comes with an overhead as mapping
space is restricted and protected by a global lock for synchronization and
(2) kmap() also requires global TLB invalidation when the kmap’s pool
wraps and it might block when the mapping space is fully utilized until a
slot becomes available.

kmap_local_page() is preferred over kmap() and kmap_atomic(). Where it
cannot mechanically replace the latters, code refactor should be considered
(special care must be taken if kernel virtual addresses are aliases in
different contexts).

With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).

Call kmap_local_page() in firmware_loader wherever kmap() is currently
used. In firmware_rw() use the helpers copy_{from,to}_page() instead of
open coding the local mappings + memcpy().

Successfully tested with "firmware" selftests on a QEMU/KVM 32-bits VM
with 4GB RAM, booting a kernel with HIGHMEM64GB enabled.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20220714235030.12732-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-28 16:32:56 +02:00
Sudeep Holla
3fcbf1c77d arch_topology: Fix cache attributes detection in the CPU hotplug path
init_cpu_topology() is called only once at the boot and all the cache
attributes are detected early for all the possible CPUs. However when
the CPUs are hotplugged out, the cacheinfo gets removed. While the
attributes are added back when the CPUs are hotplugged back in as part
of CPU hotplug state machine, it ends up called quite late after the
update_siblings_masks() are called in the secondary_start_kernel()
resulting in wrong llc_sibling_masks.

Move the call to detect_cache_attributes() inside update_siblings_masks()
to ensure the cacheinfo is updated before the LLC sibling masks are
updated. This will fix the incorrect LLC sibling masks generated when
the CPUs are hotplugged out and hotplugged back in again.

Reported-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220720-arch_topo_fixes-v3-3-43d696288e84@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-22 10:04:43 +02:00
Sudeep Holla
11969d698f cacheinfo: Use atomic allocation for percpu cache attributes
On couple of architectures like RISC-V and ARM64, we need to detect
cache attribues quite early during the boot when the secondary CPUs
start. So we will call detect_cache_attributes in the atomic context
and since use of normal allocation can sleep, we will end up getting
"sleeping in the atomic context" bug splat.

In order avoid that, move the allocation to use atomic version in
preparation to move the actual detection of cache attributes in the
CPU hotplug path which is atomic.

Cc: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220720-arch_topo_fixes-v3-1-43d696288e84@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-22 10:04:42 +02:00
Christian Marangi
739f872e48
regmap: permit to set reg_update_bits with bulk implementation
A regmap may still require to set a custom reg_update_bits instead of
relying to the regmap_bus_read/write general function.

Permit to set it in the map if provided by the regmap config.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20220715201032.19507-1-ansuelsmth@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-18 13:45:28 +01:00
Phil Auld
7ee951acd3 drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist
Using bin_attributes with a 0 size causes fstat and friends to return that
0 size. This breaks userspace code that retrieves the size before reading
the file. Rather than reverting 75bd50fa84 ("drivers/base/node.c: use
bin_attribute to break the size limitation of cpumap ABI") let's put in a
size value at compile time.

For cpulist the maximum size is on the order of
	NR_CPUS * (ceil(log10(NR_CPUS)) + 1)/2

which for 8192 is 20480 (8192 * 5)/2. In order to get near that you'd need
a system with every other CPU on one node. For example: (0,2,4,8, ... ).
To simplify the math and support larger NR_CPUS in the future we are using
(NR_CPUS * 7)/2. We also set it to a min of PAGE_SIZE to retain the older
behavior for smaller NR_CPUS.

The cpumap file the size works out to be NR_CPUS/4 + NR_CPUS/32 - 1
(or NR_CPUS * 9/32 - 1) including the ","s.

Add a set of macros for these values to cpumask.h so they can be used in
multiple places. Apply these to the handful of such files in
drivers/base/topology.c as well as node.c.

As an example, on an 80 cpu 4-node system (NR_CPUS == 8192):

before:

-r--r--r--. 1 root root 0 Jul 12 14:08 system/node/node0/cpulist
-r--r--r--. 1 root root 0 Jul 11 17:25 system/node/node0/cpumap

after:

-r--r--r--. 1 root root 28672 Jul 13 11:32 system/node/node0/cpulist
-r--r--r--. 1 root root  4096 Jul 13 11:31 system/node/node0/cpumap

CONFIG_NR_CPUS = 16384
-r--r--r--. 1 root root 57344 Jul 13 14:03 system/node/node0/cpulist
-r--r--r--. 1 root root  4607 Jul 13 14:02 system/node/node0/cpumap

The actual number of cpus doesn't matter for the reported size since they
are based on NR_CPUS.

Fixes: 75bd50fa84 ("drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI")
Fixes: bb9ec13d15 ("topology: use bin_attribute to break the size limitation of cpumap ABI")
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Yury Norov <yury.norov@gmail.com> (for include/linux/cpumask.h)
Signed-off-by: Phil Auld <pauld@redhat.com>
Link: https://lore.kernel.org/r/20220715134924.3466194-1-pauld@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-15 17:36:33 +02:00
Hsin-Yi Wang
37101d3c71 PM: domains: Ensure genpd_debugfs_dir exists before remove
Both genpd_debug_add() and genpd_debug_remove() may be called
indirectly by other drivers while genpd_debugfs_dir is not yet
set. For example, drivers can call pm_genpd_init() in probe or
pm_genpd_init() in probe fail/cleanup path:

pm_genpd_init()
 --> genpd_debug_add()

pm_genpd_remove()
 --> genpd_remove()
   --> genpd_debug_remove()

At this time, genpd_debug_init() may not yet be called.

genpd_debug_add() checks that if genpd_debugfs_dir is NULL, it
will return directly. Make sure this is also checked
in pm_genpd_remove(), otherwise components under debugfs root
which has the same name as other components under pm_genpd may
be accidentally removed, since NULL represents debugfs root.

Fixes: 718072ceb2 ("PM: domains: create debugfs nodes when adding power domains")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-14 20:50:06 +02:00
Linus Torvalds
ce114c8668 Just when you thought that all the speculation bugs were addressed and
solved and the nightmare is complete, here's the next one: speculating
 after RET instructions and leaking privileged information using the now
 pretty much classical covert channels.
 
 It is called RETBleed and the mitigation effort and controlling
 functionality has been modelled similar to what already existing
 mitigations provide.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmLKqAgACgkQEsHwGGHe
 VUoM5w/8CSvwPZ3otkhmu8MrJPtWc7eLDPjYN4qQP+19e+bt094MoozxeeWG2wmp
 hkDJAYHT2Oik/qDuEdhFgNYwS7XGgbV3Py3B8syO4//5SD5dkOSG+QqFXvXMdFri
 YsVqqNkjJOWk/YL9Ql5RS/xQewsrr0OqEyWWocuI6XAvfWV4kKvlRSd+6oPqtZEO
 qYlAHTXElyIrA/gjmxChk1HTt5HZtK3uJLf4twNlUfzw7LYFf3+sw3bdNuiXlyMr
 WcLXMwGpS0idURwP3mJa7JRuiVBzb4+kt8mWwWqA02FkKV45FRRRFhFUsy667r00
 cdZBaWdy+b7dvXeliO3FN/x1bZwIEUxmaNy1iAClph4Ifh0ySPUkxAr8EIER7YBy
 bstDJEaIqgYg8NIaD4oF1UrG0ZbL0ImuxVaFdhG1hopQsh4IwLSTLgmZYDhfn/0i
 oSqU0Le+A7QW9s2A2j6qi7BoAbRW+gmBuCgg8f8ECYRkFX1ZF6mkUtnQxYrU7RTq
 rJWGW9nhwM9nRxwgntZiTjUUJ2HtyXEgYyCNjLFCbEBfeG5QTg7XSGFhqDbgoymH
 85vsmSXYxgTgQ/kTW7Fs26tOqnP2h1OtLJZDL8rg49KijLAnISClEgohYW01CWQf
 ZKMHtz3DM0WBiLvSAmfGifScgSrLB5AjtvFHT0hF+5/okEkinVk=
 =09fW
 -----END PGP SIGNATURE-----

Merge tag 'x86_bugs_retbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 retbleed fixes from Borislav Petkov:
 "Just when you thought that all the speculation bugs were addressed and
  solved and the nightmare is complete, here's the next one: speculating
  after RET instructions and leaking privileged information using the
  now pretty much classical covert channels.

  It is called RETBleed and the mitigation effort and controlling
  functionality has been modelled similar to what already existing
  mitigations provide"

* tag 'x86_bugs_retbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
  x86/speculation: Disable RRSBA behavior
  x86/kexec: Disable RET on kexec
  x86/bugs: Do not enable IBPB-on-entry when IBPB is not supported
  x86/entry: Move PUSH_AND_CLEAR_REGS() back into error_entry
  x86/bugs: Add Cannon lake to RETBleed affected CPU list
  x86/retbleed: Add fine grained Kconfig knobs
  x86/cpu/amd: Enumerate BTC_NO
  x86/common: Stamp out the stepping madness
  KVM: VMX: Prevent RSB underflow before vmenter
  x86/speculation: Fill RSB on vmexit for IBRS
  KVM: VMX: Fix IBRS handling after vmexit
  KVM: VMX: Prevent guest RSB poisoning attacks with eIBRS
  KVM: VMX: Convert launched argument to flags
  KVM: VMX: Flatten __vmx_vcpu_run()
  objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}
  x86/speculation: Remove x86_spec_ctrl_mask
  x86/speculation: Use cached host SPEC_CTRL value for guest entry/exit
  x86/speculation: Fix SPEC_CTRL write on SMT state change
  x86/speculation: Fix firmware entry SPEC_CTRL handling
  x86/speculation: Fix RSB filling with CONFIG_RETPOLINE=n
  ...
2022-07-11 18:15:25 -07:00
Ulf Hansson
c46a0d5ae4 PM: runtime: Extend support for wakeirq for force_suspend|resume
A driver that makes use of pm_runtime_force_suspend|resume() to support
system suspend/resume, currently needs to manage the wakeirq support
itself. To avoid the boilerplate code in the driver's system suspend/resume
callbacks in particular, let's extend pm_runtime_force_suspend|resume() to
deal with the wakeirq.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-08 21:29:06 +02:00
Greg Kroah-Hartman
2c8f7ef4b3 cacheinfo and arch_topology updates for v5.20
These are updates to fix some discrepancies we have in the CPU topology
 parsing from the device tree /cpu-map node and the divergence from the
 behaviour on a ACPI enabled platform. The expectation is that both DT
 and ACPI enabled systems must present consistent view of the CPU topology.
 
 The current assignment of generated cluster count as the physical package
 identifier for each CPU is wrong. The device tree bindings for CPU
 topology supports sockets to infer the socket or physical package
 identifier for a given CPU. It is now being made use of you address the
 issue. These updates also assigns the cluster identifier as parsed from
 the device tree cluster nodes within /cpu-map without support for
 nesting of the clusters as there are no such reported/known platforms.
 
 In order to be on par with ACPI PPTT physical package/socket support,
 these updates also include support for socket nodes in /cpu-map.
 
 The only exception is that the last level cache id information can be
 inferred from the same ACPI PPTT while we need to parse CPU cache nodes
 in the device tree. The cacheinfo changes here is to enable the re-use
 of the cacheinfo to detect the cache attributes for all the CPU quite
 early even before the scondardaries are booted so that the information
 can be used to build the schedular domains especially the last level
 cache(LLC).
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEunHlEgbzHrJD3ZPhAEG6vDF+4pgFAmLFak4ACgkQAEG6vDF+
 4pjHNxAAyzXpazkWuTjTot9UcX2TE8kIlEB4wXoGr1WJfi2uefVuvo3owvSKLdmr
 pBNUf0fSLKShljueXOYcmwxVvSoN3zWSrOh4huUBWv0VPBg5yyNplZChwbhxjmiL
 N5FGtSDHoTgPjjMUXnlsa/Y7/RDUhxR+s4ZdGS/vnMHbGr8Gsm5bjc6BNCq9E6cz
 xnGDzUOS3+Sin+751De09HIuH5FOoCEpWOj6FGVK3MtEsizHU4ANEKTgFdsE26mG
 nmVY1CU3GJmHluvG1JgL4+HmZsW02h2yU0tRSLqcseJCUou8gJ5yr0wYF6wmsHGk
 nzGDfV7GzLdQg5rVnWcgzrzibqbBKJvh795e2cW3tV60VjMxlh57L7OWnHAEzQh8
 QCF8HeE2CGg6VlYC+oB5JZ4pLdPE69e0+fHzhFy7hqK/B9yOr0olIKXxcm4tR/TV
 5Ri7D8bX4Oviq1pQcT+GE/8Of5vX5R9LTiH1V0ld38npVvA55KDnO6WKvcadEucO
 tKnHZx2dZYR/sRJ8ABz4hb7+UlLiLpCPFudx+BcXLHn+nWSqXYlu+F/2D2nsGRP+
 HpmJHISJ40gD669KvupLg0/TtPdQ1oRmuf9CXUiMkzQZcySIW4wmFvCvbUfMcApl
 7OzQ+FtAPb7n821mSV7KJBYJ5xOxNVR7DfUovmXCa/91xfqmE1M=
 =UCxa
 -----END PGP SIGNATURE-----

Merge tag 'arch-cache-topo-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into driver-core-next

Sudeep writes:

cacheinfo and arch_topology updates for v5.20

These are updates to fix some discrepancies we have in the CPU topology
parsing from the device tree /cpu-map node and the divergence from the
behaviour on a ACPI enabled platform. The expectation is that both DT
and ACPI enabled systems must present consistent view of the CPU topology.

The current assignment of generated cluster count as the physical package
identifier for each CPU is wrong. The device tree bindings for CPU
topology supports sockets to infer the socket or physical package
identifier for a given CPU. It is now being made use of you address the
issue. These updates also assigns the cluster identifier as parsed from
the device tree cluster nodes within /cpu-map without support for
nesting of the clusters as there are no such reported/known platforms.

In order to be on par with ACPI PPTT physical package/socket support,
these updates also include support for socket nodes in /cpu-map.

The only exception is that the last level cache id information can be
inferred from the same ACPI PPTT while we need to parse CPU cache nodes
in the device tree. The cacheinfo changes here is to enable the re-use
of the cacheinfo to detect the cache attributes for all the CPU quite
early even before the scondardaries are booted so that the information
can be used to build the schedular domains especially the last level
cache(LLC).

* tag 'arch-cache-topo-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (21 commits)
  ACPI: Remove the unused find_acpi_cpu_cache_topology()
  arch_topology: Warn that topology for nested clusters is not supported
  arch_topology: Add support for parsing sockets in /cpu-map
  arch_topology: Set cluster identifier in each core/thread from /cpu-map
  arch_topology: Limit span of cpu_clustergroup_mask()
  arch_topology: Don't set cluster identifier as physical package identifier
  arch_topology: Avoid parsing through all the CPUs once a outlier CPU is found
  arch_topology: Check for non-negative value rather than -1 for IDs validity
  arch_topology: Set thread sibling cpumask only within the cluster
  arch_topology: Drop LLC identifier stash from the CPU topology
  arm64: topology: Remove redundant setting of llc_id in CPU topology
  arch_topology: Use the last level cache information from the cacheinfo
  arch_topology: Add support to parse and detect cache attributes
  cacheinfo: Align checks in cache_shared_cpu_map_{setup,remove} for readability
  cacheinfo: Use cache identifiers to check if the caches are shared if available
  cacheinfo: Allow early detection and population of cache attributes
  cacheinfo: Add support to check if last level cache(LLC) is valid or shared
  cacheinfo: Move cache_leaves_are_shared out of CONFIG_OF
  cacheinfo: Add helper to access any cache index for a given CPU
  cacheinfo: Use of_cpu_device_node_get instead cpu_dev->of_node
  ...
2022-07-08 15:17:52 +02:00
Matt Ranostay
cf39ed2e8e
regmap: add WARN_ONCE when invalid mask is provided to regmap_field_init()
In regmap_field_init() when a invalid mask is provided it still
initializes with any warnings.

An example of this is when the LSB is greater than MSB a mask of zero
is produced.

WARN_ONCE() is not ideal for this but requires less changes to core regmap
code.

Cc: Mark Brown <broonie@kernel.org>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Link: https://lore.kernel.org/r/20220708013125.313892-1-mranostay@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-08 11:51:56 +01:00
Bjorn Helgaas
09d3154a6f PM: wakeup: Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP
Previously the CONFIG_PM_SLEEP and !CONFIG_PM_SLEEP device_init_wakeup()
implementations differed in confusing ways:

  - The PM_SLEEP version checked for a NULL device pointer and returned
    -EINVAL, while the !PM_SLEEP version did not and would simply
    dereference a NULL pointer.

  - When called with "false", the !PM_SLEEP version cleared "capable" and
    "enable" in the opposite order of the PM_SLEEP version.  That was
    harmless because for !PM_SLEEP they're simple assignments, but it's
    unnecessary confusion.

Use a simplified version of the PM_SLEEP implementation for both cases.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-05 20:48:46 +02:00
Aidan MacDonald
773d09b4c3
regmap-irq: Fix bug in regmap_irq_get_irq_reg_linear()
irq_reg_stride in struct regmap_irq_chip is often 0, but that
actually means to use the default stride of 1. The effective
stride is stored in struct regmap_irq_chip_data->irq_reg_stride
and will get the corrected default value.

The default ->get_irq_reg() callback was using the stride from
the chip definition, which is wrong; fix it to use the effective
stride from the chip data instead.

Link: https://lore.kernel.org/lkml/acaaf77f-3282-8544-dd3c-7915fc1a6a4f@samsung.com/
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220704112847.23844-1-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-05 13:00:55 +01:00
Sudeep Holla
00e66e37af arch_topology: Warn that topology for nested clusters is not supported
We don't support the topology for clusters of CPU clusters while the
DT and ACPI bindings theoritcally support the same. Just warn about the
same so that it is clear to the users of arch_topology that the nested
clusters are not yet supported.

Link: https://lore.kernel.org/r/20220704101605.1318280-21-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04 16:23:23 +01:00
Sudeep Holla
dea8c0b40f arch_topology: Add support for parsing sockets in /cpu-map
Finally let us add support for socket nodes in /cpu-map in the device
tree. Since this may not be present in all the old platforms and even
most of the existing platforms, we need to assume absence of the socket
node indicates that it is a single socket system and handle appropriately.

Also it is likely that most single socket systems skip to as the node
since it is optional.

Link: https://lore.kernel.org/r/20220704101605.1318280-20-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04 16:23:23 +01:00
Sudeep Holla
556c9678a7 arch_topology: Set cluster identifier in each core/thread from /cpu-map
Let us set the cluster identifier as parsed from the device tree
cluster nodes within /cpu-map.

We don't support nesting of clusters yet as there are no real hardware
to support clusters of clusters.

Link: https://lore.kernel.org/r/20220704101605.1318280-19-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04 16:23:23 +01:00
Ionela Voinescu
bfcc439743 arch_topology: Limit span of cpu_clustergroup_mask()
Currently the cluster identifier is not set on DT based platforms.
The reset or default value is -1 for all the CPUs. Once we assign the
cluster identifier values correctly, the cluster_sibling mask will be
populated and returned by cpu_clustergroup_mask() to contribute in the
creation of the CLS scheduling domain level, if SCHED_CLUSTER is
enabled.

To avoid topologies that will result in questionable or incorrect
scheduling domains, impose restrictions regarding the span of clusters,
as presented to scheduling domains building code: cluster_sibling should
not span more or the same CPUs as cpu_coregroup_mask().

This is needed in order to obtain a strict separation between the MC and
CLS levels, and maintain the same domains for existing platforms in
the presence of CONFIG_SCHED_CLUSTER, where the new cluster information
is redundant and irrelevant for the scheduler.

While previously the scheduling domain builder code would have removed MC
as redundant and kept CLS if SCHED_CLUSTER was enabled and the
cpu_coregroup_mask() and cpu_clustergroup_mask() spanned the same CPUs,
now CLS will be removed and MC kept.

Link: https://lore.kernel.org/r/20220704101605.1318280-18-sudeep.holla@arm.com
Cc: Darren Hart <darren@os.amperecomputing.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04 16:23:16 +01:00
Sudeep Holla
26a2b73a7b arch_topology: Don't set cluster identifier as physical package identifier
Currently as we parse the CPU topology from /cpu-map node from the
device tree, we assign generated cluster count as the physical package
identifier for each CPU which is wrong.

The device tree bindings for CPU topology supports sockets to infer
the socket or physical package identifier for a given CPU. Since it is
fairly new and not supported on most of the old and existing systems, we
can assume all such systems have single socket/physical package.

Fix the physical package identifier to 0 by removing the assignment of
cluster identifier to the same.

Link: https://lore.kernel.org/r/20220704101605.1318280-17-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04 16:22:29 +01:00
Sudeep Holla
5a01bb8efb arch_topology: Avoid parsing through all the CPUs once a outlier CPU is found
There is no point in looping through all the CPU's physical package
identifier to check if it is valid or not once a CPU which is outside
the topology(i.e. outlier CPU) is found.

Let us just break out of the loop early in such case.

Link: https://lore.kernel.org/r/20220704101605.1318280-16-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04 16:22:29 +01:00
Sudeep Holla
9eb5e54f87 arch_topology: Check for non-negative value rather than -1 for IDs validity
Instead of just comparing the cpu topology IDs with -1 to check their
validity, improve that by checking for a valid non-negative value.

Link: https://lore.kernel.org/r/20220704101605.1318280-15-sudeep.holla@arm.com
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04 16:22:29 +01:00
Sudeep Holla
3f8283296b arch_topology: Set thread sibling cpumask only within the cluster
Currently the cluster identifier is not set on the DT based platforms.
The reset or default value is -1 for all the CPUs. Once we assign the
cluster identifier values correctly that may result in getting the thread
siblings wrong as the core identifiers can be same for 2 different CPUs
belonging to 2 different cluster.

So, in order to get the thread sibling cpumasks correct, we need to
update them only if the cores they belong are in the same cluster within
the socket. Let us skip updation of the thread sibling cpumaks if the
cluster identifier doesn't match.

This change won't affect even if the cluster identifiers are not set
currently but will avoid any breakage once we set the same correctly.

Link: https://lore.kernel.org/r/20220704101605.1318280-14-sudeep.holla@arm.com
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04 16:22:29 +01:00
Sudeep Holla
5b8dc787ce arch_topology: Drop LLC identifier stash from the CPU topology
Since the cacheinfo LLC information is used directly in arch_topology,
there is no need to parse and store the LLC ID information only for
ACPI systems in the CPU topology.

Remove the redundant LLC ID from the generic CPU arch_topology
information.

Link: https://lore.kernel.org/r/20220704101605.1318280-13-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04 16:22:29 +01:00
Sudeep Holla
f027db2f9a arch_topology: Use the last level cache information from the cacheinfo
The cacheinfo is now initialised early along with the CPU topology
initialisation. Instead of relying on the LLC ID information parsed
separately only with ACPI PPTT elsewhere, migrate to use the similar
information from the cacheinfo.

This is generic for both DT and ACPI systems. The ACPI LLC ID information
parsed separately can now be removed from arch specific code.

Link: https://lore.kernel.org/r/20220704101605.1318280-11-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04 16:22:29 +01:00
Sudeep Holla
38db9b9546 arch_topology: Add support to parse and detect cache attributes
Currently ACPI populates just the minimum information about the last
level cache from PPTT in order to feed the same to build sched_domains.
Similar support for DT platforms is not present.

In order to enable the same, the entire cache hierarchy information can
be built as part of CPU topoplogy parsing both on ACPI and DT platforms.

Note that this change builds the cacheinfo early even on ACPI systems,
but the current mechanism of building llc_sibling mask remains unchanged.

Link: https://lore.kernel.org/r/20220704101605.1318280-10-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04 16:22:28 +01:00
Sudeep Holla
521103134a cacheinfo: Align checks in cache_shared_cpu_map_{setup,remove} for readability
The checks to skip the CPU itself or no cacheinfo case are implemented
bit differently though the effect is exactly same. Just align the
implementation in both cache_shared_cpu_map_{setup,remove} just for
improved readability. No functional change.

Link: https://lore.kernel.org/r/20220704101605.1318280-9-sudeep.holla@arm.com
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04 16:22:28 +01:00
Sudeep Holla
f16d1becf9 cacheinfo: Use cache identifiers to check if the caches are shared if available
The cache identifiers is an optional property on most of the platforms.
The presence of one must be indicated by the CACHE_ID valid bit in the
attributes.

We can use the cache identifiers provided by the firmware to check if
any two cpus share the same cache instead of relying on the fw_token
generated and set in the OS.

Link: https://lore.kernel.org/r/20220704101605.1318280-8-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04 16:22:28 +01:00
Sudeep Holla
36bbc5b4ff cacheinfo: Allow early detection and population of cache attributes
Some architecture/platforms may need to setup cache properties very
early in the boot along with other cpu topologies so that all these
information can be used to build sched_domains which is used by the
scheduler.

Allow detect_cache_attributes to be called quite early during the boot.

Link: https://lore.kernel.org/r/20220704101605.1318280-7-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04 16:22:28 +01:00
Sudeep Holla
cc1cfc47ea cacheinfo: Add support to check if last level cache(LLC) is valid or shared
It is useful to have helper to check if the given two CPUs share last
level cache. We can do that check by comparing fw_token or by comparing
the cache ID. Currently we check just for fw_token as the cache ID is
optional.

This helper can be used to build the llc_sibling during arch specific
topology parsing and feeding information to the sched_domains. This also
helps to get rid of llc_id in the CPU topology as it is sort of duplicate
information.

Also add helper to check if the llc information in cacheinfo is valid
or not.

Link: https://lore.kernel.org/r/20220704101605.1318280-6-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04 16:22:28 +01:00
Sudeep Holla
9447eb0f15 cacheinfo: Move cache_leaves_are_shared out of CONFIG_OF
cache_leaves_are_shared is already used even with ACPI and PPTT. It
checks if the cache leaves are the shared based on fw_token pointer.
However it is defined conditionally only if CONFIG_OF is enabled which
is wrong.

Move the function cache_leaves_are_shared out of CONFIG_OF and keep it
generic. It also handles the case where both OF and ACPI is not defined.

Link: https://lore.kernel.org/r/20220704101605.1318280-5-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04 16:22:28 +01:00
Sudeep Holla
b14e8d21f7 cacheinfo: Add helper to access any cache index for a given CPU
The cacheinfo for a given CPU at a given index is used at quite a few
places by fetching the base point for index 0 using the helper
per_cpu_cacheinfo(cpu) and offsetting it by the required index.

Instead, add another helper to fetch the required pointer directly and
use it to simplify and improve readability.

Link: https://lore.kernel.org/r/20220704101605.1318280-4-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04 16:22:28 +01:00
Sudeep Holla
d4ec840bae cacheinfo: Use of_cpu_device_node_get instead cpu_dev->of_node
The of_cpu_device_node_get takes care of fetching the CPU'd device node
either from cached cpu_dev->of_node if cpu_dev is initialised or uses
of_get_cpu_node to parse and fetch node if cpu_dev isn't available yet.

Just use of_cpu_device_node_get instead of getting the cpu device first
and then using cpu_dev->of_node for two reasons:
1. There is no other use of cpu_dev and can be simplified
2. It enabled the use detect_cache_attributes and hence cache_setup_of_node
   much earlier before the CPUs are registered as devices.

Link: https://lore.kernel.org/r/20220704101605.1318280-3-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04 16:22:27 +01:00
Rafael J. Wysocki
8873710660 PM: runtime: Fix supplier device management during consumer probe
Because pm_runtime_get_suppliers() bumps up the rpm_active counter
of each device link to a supplier of the given device in addition
to bumping up the supplier's PM-runtime usage counter, a runtime
suspend of the consumer device may case the latter to go down to 0
when pm_runtime_put_suppliers() is running on a remote CPU.  If that
happens after pm_runtime_put_suppliers() has released power.lock for
the consumer device, and a runtime resume of that device takes place
immediately after it, before pm_runtime_put() is called for the
supplier, that pm_runtime_put() call may cause the supplier to be
suspended even though the consumer is active.

To prevent that from happening, modify pm_runtime_get_suppliers() to
call pm_runtime_get_sync() for the given device's suppliers without
touching the rpm_active counters of the involved device links
Accordingly, modify pm_runtime_put_suppliers() to call pm_runtime_put()
for the given device's suppliers without looking at the rpm_active
counters of the device links at hand.  [This is analogous to what
happened before commit 4c06c4e6cf ("driver core: Fix possible
supplier PM-usage counter imbalance").]

Since pm_runtime_get_suppliers() sets supplier_preactivated for each
device link where the supplier's PM-runtime usage counter has been
incremented and pm_runtime_put_suppliers() calls pm_runtime_put() for
the suppliers whose device links have supplier_preactivated set, the
PM-runtime usage counter is balanced for each supplier and this is
independent of the runtime suspend and resume of the consumer device.

However, in case a device link with DL_FLAG_PM_RUNTIME set is dropped
during the consumer device probe, so pm_runtime_get_suppliers() bumps
up the supplier's PM-runtime usage counter, but it cannot be dropped by
pm_runtime_put_suppliers(), make device_link_release_fn() take care of
that.

Fixes: 4c06c4e6cf ("driver core: Fix possible supplier PM-usage counter imbalance")
Reported-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
2022-07-01 21:04:15 +02:00
Rafael J. Wysocki
07358194ba PM: runtime: Redefine pm_runtime_release_supplier()
Instead of passing an extra bool argument to pm_runtime_release_supplier(),
make its callers take care of triggering a runtime-suspend of the
supplier device as needed.

No expected functional impact.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
2022-07-01 21:04:02 +02:00
Mark Brown
e129e41381
regmap-irq cleanups and refactoring
Merge series from Aidan MacDonald <aidanmacdonald.0x0@gmail.com>:

This series is an attempt at cleaning up the regmap-irq API in order
to simplify things and consolidate existing features, while at the
same time generalizing it to support a wider range of hardware.

There is a new system for IRQ type configuration, some tweaks to
unmask registers so they're more intuitive and useful, and a new
callback for calculating register addresses. There's also a few
minor code cleanups in here.

In v2 I've taken the approach of adding new features and deprecating
existing ones rather than removing them aggressively. Warnings will
be issued for any drivers that use deprecated features, but they'll
otherwise continue to function normally.

One important caveat: not all of these changes are tested beyond
compile testing, since I don't have hardware to exercise all of
the features.
2022-06-30 18:26:37 +01:00
Schspa Shi
a5201d42e2
regmap: cache: Add extra parameter check in regcache_init
When num_reg_defaults > 0 but reg_defaults is NULL, there will be a
NULL pointer exception.

Current code has no such usage, but as additional hardening, also
check this to prevent any chance of crashing.

Signed-off-by: Schspa Shi <schspa@gmail.com>
Link: https://lore.kernel.org/r/20220629130951.63040-1-schspa@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-30 13:33:21 +01:00
Aidan MacDonald
48e014ee9a
regmap-irq: Deprecate the not_fixed_stride flag
This flag is a bit of a hack and the same thing can be accomplished
using a custom ->get_irq_reg() callback. Add a warning to catch any
use of the flag.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-13-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-29 18:13:17 +01:00
Aidan MacDonald
bdf9b86cd3
regmap-irq: Add get_irq_reg() callback
Replace the internal sub_irq_reg() function with a public callback
that drivers can use when they have more complex register layouts.
The default implementation is regmap_irq_get_irq_reg_linear(), used
if the chip doesn't provide its own callback.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-12-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-29 18:13:16 +01:00
Aidan MacDonald
e8ffb12e7f
regmap-irq: Fix inverted handling of unmask registers
To me "unmask" suggests that we write 1s to the register when
an interrupt is enabled. This also makes sense because it's the
opposite of what the "mask" register does (write 1s to disable
an interrupt).

But regmap-irq does the opposite: for a disabled interrupt, it
writes 1s to "unmask" and 0s to "mask". This is surprising and
deviates from the usual way mask registers are handled.

Additionally, mask_invert didn't interact with unmask registers
properly -- it caused them to be ignored entirely.

Fix this by making mask and unmask registers orthogonal, using
the following behavior:

* Mask registers are written with 1s for disabled interrupts.
* Unmask registers are written with 1s for enabled interrupts.

This behavior supports both normal or inverted mask registers
and separate set/clear registers via different combinations of
mask_base/unmask_base.

The old unmask register behavior is deprecated. Drivers need to
opt-in to the new behavior by setting mask_unmask_non_inverted.
Warnings are issued if the driver relies on deprecated behavior.
Chips that only set one of mask_base/unmask_base don't have to
use the mask_unmask_non_inverted flag because that use case was
previously not supported.

The mask_invert flag is also deprecated in favor of describing
inverted mask registers as unmask registers.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-11-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-29 18:13:15 +01:00
Aidan MacDonald
9edd4f5aee
regmap-irq: Deprecate type registers and virtual registers
Config registers can be used to replace both type and virtual
registers, so mark both features are deprecated and issue a
warning if they're used.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-10-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-29 18:13:14 +01:00
Aidan MacDonald
faa87ce919
regmap-irq: Introduce config registers for irq types
Config registers provide a more uniform approach to handling irq type
registers. They are essentially an extension of the virtual registers
used by the qcom-pm8008 driver.

Config registers can be represented as a 2D array:

    config_base[0]      reg0,0      reg0,1      reg0,2      reg0,3
    config_base[1]      reg1,0      reg1,1      reg1,2      reg1,3
    config_base[2]      reg2,0      reg2,1      reg2,2      reg2,3

There are 'num_config_bases' base registers, each of which is used to
address 'num_config_regs' registers. The addresses are calculated in
the same way as for other bases. It is assumed that an irq's type is
controlled by one column of registers; that column is identified by
the irq's 'type_reg_offset'.

The set_type_config() callback is responsible for updating the config
register contents. It receives an array of buffers (each represents a
row of registers) and the index of the column to update, along with
the 'struct regmap_irq' description and requested irq type.

Buffered values are written to registers in regmap_irq_sync_unlock().
Note that the entire register contents are overwritten, which is a
minor change in behavior from type registers via 'type_base'.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-9-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-29 18:13:13 +01:00
Aidan MacDonald
f7cc5062d6
regmap-irq: Refactor checks for status bulk read support
There are several conditions that must be satisfied to support
bulk read of status registers. Move the check into a function
to avoid duplicating it in two places.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-8-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-29 18:13:12 +01:00
Aidan MacDonald
ad22b3e98f
regmap-irq: Remove mask_writeonly and regmap_irq_update_bits()
Commit a71411dbf6 ("regmap: irq: add chip option mask_writeonly")
introduced the mask_writeonly option, but it isn't used now and it
appears it's never been used by any in-tree drivers. The motivation
for the option is mentioned in the commit message,

    Some irq controllers have writeonly/multipurpose register
    layouts. In those cases we read invalid data back. [...]

The option causes mask register updates to use regmap_write_bits()
instead of regmap_update_bits().

However, regmap_write_bits() doesn't solve the reading invalid data
problem. It's still a read-modify-write op like regmap_update_bits().
The difference is that 'update bits' will only write the new value
if it is different from the current value, while 'write bits' will
write the new value unconditionally, even if it's the same as the
current value.

This seems like a bit of a specialized use case and probably isn't
that useful for regmap-irq, so let's just remove the option and go
back to using an 'update bits' op for the mask registers. We can
always add the option back if some driver ends up needing it in the
future.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-7-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-29 18:13:11 +01:00
Aidan MacDonald
6b0c317477
regmap-irq: Remove inappropriate uses of regmap_irq_update_bits()
regmap_irq_update_bits() is misnamed and should only be used for
updating mask registers, since it checks the mask_writeonly flag.
However, it was also used for updating wake and type registers.

It's safe to replace these uses with regmap_update_bits() because
there are no users of the mask_writeonly flag.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-6-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-29 18:13:10 +01:00
Aidan MacDonald
610fdd668e
regmap-irq: Remove an unnecessary restriction on type_in_mask
Check types_supported instead of checking type_rising/falling_val
when using type_in_mask interrupts. This makes the intent clearer
and allows a type_in_mask irq to support level or edge triggers,
rather than only edge triggers.

Update the documentation and comments to reflect the new behavior.

This shouldn't affect existing drivers, because if they didn't
set types_supported properly the type buffer wouldn't be updated.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-5-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-29 18:13:09 +01:00
Aidan MacDonald
cffc2be302
regmap-irq: Cleanup sizeof(...) use in memory allocation
Instead of mentioning unsigned int directly, use a sizeof(...)
involving the buffer we're allocating to ensure the types don't
get out of sync.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-4-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-29 18:13:08 +01:00
Aidan MacDonald
53a1a16dcc
regmap-irq: Remove unused type_reg_stride field
It appears that no chip ever required a nonzero type_reg_stride
and commit 1066cfbdfa ("regmap-irq: Extend sub-irq to support
non-fixed reg strides") broke support. Just remove the field.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-3-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-29 18:13:07 +01:00
Aidan MacDonald
445cbd219a
regmap-irq: Convert bool bitfields to unsigned int
Use 'unsigned int' for bitfields for consistency with most other
kernel code.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-29 18:13:06 +01:00