Commit Graph

10176 Commits

Author SHA1 Message Date
Linus Torvalds
4a2d057e4f Merge branch 'PAGE_CACHE_SIZE-removal'
Merge PAGE_CACHE_SIZE removal patches from Kirill Shutemov:
 "PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
  ago with promise that one day it will be possible to implement page
  cache with bigger chunks than PAGE_SIZE.

  This promise never materialized.  And unlikely will.

  Let's stop pretending that pages in page cache are special.  They are
  not.

  The first patch with most changes has been done with coccinelle.  The
  second is manual fixups on top.

  The third patch removes macros definition"

[ I was planning to apply this just before rc2, but then I spaced out,
  so here it is right _after_ rc2 instead.

  As Kirill suggested as a possibility, I could have decided to only
  merge the first two patches, and leave the old interfaces for
  compatibility, but I'd rather get it all done and any out-of-tree
  modules and patches can trivially do the converstion while still also
  working with older kernels, so there is little reason to try to
  maintain the redundant legacy model.    - Linus ]

* PAGE_CACHE_SIZE-removal:
  mm: drop PAGE_CACHE_* and page_cache_{get,release} definition
  mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usage
  mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
2016-04-04 10:50:24 -07:00
Kirill A. Shutemov
ea1754a084 mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usage
Mostly direct substitution with occasional adjustment or removing
outdated comments.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00
Kirill A. Shutemov
09cbfeaf1a mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00
Neil Zhang
ec3b688250 mm/page_isolation.c: fix the function comments
Commit fea85cff11 ("mm/page_isolation.c: return last tested pfn rather
than failure indicator") changed the meaning of the return value.  Let's
change the function comments as well.

Signed-off-by: Neil Zhang <neilzhang1123@hotmail.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 17:03:37 -05:00
Michal Hocko
af8e15cc85 oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head
Commit bb29902a75 ("oom, oom_reaper: protect oom_reaper_list using
simpler way") has simplified the check for tasks already enqueued for
the oom reaper by checking tsk->oom_reaper_list != NULL.  This check is
not sufficient because the tsk might be the head of the queue without
any other tasks queued and then we would simply lockup looping on the
same task.  Fix the condition by checking for the head as well.

Fixes: bb29902a75 ("oom, oom_reaper: protect oom_reaper_list using simpler way")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 17:03:37 -05:00
Nadav Amit
858eaaa711 mm/rmap: batched invalidations should use existing api
The recently introduced batched invalidations mechanism uses its own
mechanism for shootdown.  However, it does wrong accounting of
interrupts (e.g., inc_irq_stat is called for local invalidations),
trace-points (e.g., TLB_REMOTE_SHOOTDOWN for local invalidations) and
may break some platforms as it bypasses the invalidation mechanisms of
Xen and SGI UV.

This patch reuses the existing TLB flushing mechnaisms instead.  We use
NULL as mm to indicate a global invalidation is required.

Fixes 72b252aed5 ("mm: send one IPI per CPU to TLB flush all entries after unmapping pages")
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 17:03:37 -05:00
Xishi Qiu
6f25a14a70 mm: fix invalid node in alloc_migrate_target()
It is incorrect to use next_node to find a target node, it will return
MAX_NUMNODES or invalid node.  This will lead to crash in buddy system
allocation.

Fixes: c8721bbbdd ("mm: memory-hotplug: enable memory hotplug to handle hugepage")
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Laura Abbott" <lauraa@codeaurora.org>
Cc: Hui Zhu <zhuhui@xiaomi.com>
Cc: Wang Xiaoqiang <wangxq10@lzu.edu.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 17:03:37 -05:00
Alexander Potapenko
0b355eaaaa mm, kasan: fix compilation for CONFIG_SLAB
Add the missing argument to set_track().

Fixes: cd11016e5f ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB")
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Konstantin Serebryany <kcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 17:03:37 -05:00
Kirill A. Shutemov
0fda2788b0 thp: fix typo in khugepaged_scan_pmd()
!PageLRU should lead to SCAN_PAGE_LRU, not SCAN_SCAN_ABORT result.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Nicolai Stange
e7080a439a mm/filemap: generic_file_read_iter(): check for zero reads unconditionally
If
 - generic_file_read_iter() gets called with a zero read length,
 - the read offset is at a page boundary,
 - IOCB_DIRECT is not set
-  and the page in question hasn't made it into the page cache yet,
then do_generic_file_read() will trigger a readahead with a req_size hint
of zero.

Since roundup_pow_of_two(0) is undefined, UBSAN reports

  UBSAN: Undefined behaviour in include/linux/log2.h:63:13
  shift exponent 64 is too large for 64-bit type 'long unsigned int'
  CPU: 3 PID: 1017 Comm: sa1 Tainted: G L 4.5.0-next-20160318+ #14
  [...]
  Call Trace:
   [...]
   [<ffffffff813ef61a>] ondemand_readahead+0x3aa/0x3d0
   [<ffffffff813ef61a>] ? ondemand_readahead+0x3aa/0x3d0
   [<ffffffff813c73bd>] ? find_get_entry+0x2d/0x210
   [<ffffffff813ef9c3>] page_cache_sync_readahead+0x63/0xa0
   [<ffffffff813cc04d>] do_generic_file_read+0x80d/0xf90
   [<ffffffff813cc955>] generic_file_read_iter+0x185/0x420
   [...]
   [<ffffffff81510b06>] __vfs_read+0x256/0x3d0
   [...]

when get_init_ra_size() gets called from ondemand_readahead().

The net effect is that the initial readahead size is arch dependent for
requested read lengths of zero: for example, since

  1UL << (sizeof(unsigned long) * 8)

evaluates to 1 on x86 while its result is 0 on ARMv7, the initial readahead
size becomes 4 on the former and 0 on the latter.

What's more, whether or not the file access timestamp is updated for zero
length reads is decided differently for the two cases of IOCB_DIRECT
being set or cleared: in the first case, generic_file_read_iter()
explicitly skips updating that timestamp while in the latter case, it is
always updated through the call to do_generic_file_read().

According to POSIX, zero length reads "do not modify the last data access
timestamp" and thus, the IOCB_DIRECT behaviour is POSIXly correct.

Let generic_file_read_iter() unconditionally check the requested read
length at its entry and return immediately with success if it is zero.

Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Alexander Potapenko
cd11016e5f mm, kasan: stackdepot implementation. Enable stackdepot for SLAB
Implement the stack depot and provide CONFIG_STACKDEPOT.  Stack depot
will allow KASAN store allocation/deallocation stack traces for memory
chunks.  The stack traces are stored in a hash table and referenced by
handles which reside in the kasan_alloc_meta and kasan_free_meta
structures in the allocated memory chunks.

IRQ stack traces are cut below the IRQ entry point to avoid unnecessary
duplication.

Right now stackdepot support is only enabled in SLAB allocator.  Once
KASAN features in SLAB are on par with those in SLUB we can switch SLUB
to stackdepot as well, thus removing the dependency on SLUB stack
bookkeeping, which wastes a lot of memory.

This patch is based on the "mm: kasan: stack depots" patch originally
prepared by Dmitry Chernenkov.

Joonsoo has said that he plans to reuse the stackdepot code for the
mm/page_owner.c debugging facility.

[akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t]
[aryabinin@virtuozzo.com: comment style fixes]
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Alexander Potapenko
505f5dcb1c mm, kasan: add GFP flags to KASAN API
Add GFP flags to KASAN hooks for future patches to use.

This patch is based on the "mm: kasan: unified support for SLUB and SLAB
allocators" patch originally prepared by Dmitry Chernenkov.

Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Alexander Potapenko
7ed2f9e663 mm, kasan: SLAB support
Add KASAN hooks to SLAB allocator.

This patch is based on the "mm: kasan: unified support for SLUB and SLAB
allocators" patch originally prepared by Dmitry Chernenkov.

Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Vlastimil Babka
d9dddbf556 mm/page_alloc: prevent merging between isolated and other pageblocks
Hanjun Guo has reported that a CMA stress test causes broken accounting of
CMA and free pages:

> Before the test, I got:
> -bash-4.3# cat /proc/meminfo | grep Cma
> CmaTotal:         204800 kB
> CmaFree:          195044 kB
>
>
> After running the test:
> -bash-4.3# cat /proc/meminfo | grep Cma
> CmaTotal:         204800 kB
> CmaFree:         6602584 kB
>
> So the freed CMA memory is more than total..
>
> Also the the MemFree is more than mem total:
>
> -bash-4.3# cat /proc/meminfo
> MemTotal:       16342016 kB
> MemFree:        22367268 kB
> MemAvailable:   22370528 kB

Laura Abbott has confirmed the issue and suspected the freepage accounting
rewrite around 3.18/4.0 by Joonsoo Kim.  Joonsoo had a theory that this is
caused by unexpected merging between MIGRATE_ISOLATE and MIGRATE_CMA
pageblocks:

> CMA isolates MAX_ORDER aligned blocks, but, during the process,
> partialy isolated block exists. If MAX_ORDER is 11 and
> pageblock_order is 9, two pageblocks make up MAX_ORDER
> aligned block and I can think following scenario because pageblock
> (un)isolation would be done one by one.
>
> (each character means one pageblock. 'C', 'I' means MIGRATE_CMA,
> MIGRATE_ISOLATE, respectively.
>
> CC -> IC -> II (Isolation)
> II -> CI -> CC (Un-isolation)
>
> If some pages are freed at this intermediate state such as IC or CI,
> that page could be merged to the other page that is resident on
> different type of pageblock and it will cause wrong freepage count.

This was supposed to be prevented by CMA operating on MAX_ORDER blocks,
but since it doesn't hold the zone->lock between pageblocks, a race
window does exist.

It's also likely that unexpected merging can occur between
MIGRATE_ISOLATE and non-CMA pageblocks.  This should be prevented in
__free_one_page() since commit 3c605096d3 ("mm/page_alloc: restrict
max order of merging on isolated pageblock").  However, we only check
the migratetype of the pageblock where buddy merging has been initiated,
not the migratetype of the buddy pageblock (or group of pageblocks)
which can be MIGRATE_ISOLATE.

Joonsoo has suggested checking for buddy migratetype as part of
page_is_buddy(), but that would add extra checks in allocator hotpath
and bloat-o-meter has shown significant code bloat (the function is
inline).

This patch reduces the bloat at some expense of more complicated code.
The buddy-merging while-loop in __free_one_page() is initially bounded
to pageblock_border and without any migratetype checks.  The checks are
placed outside, bumping the max_order if merging is allowed, and
returning to the while-loop with a statement which can't be possibly
considered harmful.

This fixes the accounting bug and also removes the arguably weird state
in the original commit 3c605096d3 where buddies could be left
unmerged.

Fixes: 3c605096d3 ("mm/page_alloc: restrict max order of merging on isolated pageblock")
Link: https://lkml.org/lkml/2016/3/2/280
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Hanjun Guo <guohanjun@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Debugged-by: Laura Abbott <labbott@redhat.com>
Debugged-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>	[3.18+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Tetsuo Handa
bb29902a75 oom, oom_reaper: protect oom_reaper_list using simpler way
"oom, oom_reaper: disable oom_reaper for oom_kill_allocating_task" tried
to protect oom_reaper_list using MMF_OOM_KILLED flag.  But we can do it
by simply checking tsk->oom_reaper_list != NULL.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Michal Hocko
e26796066f oom: make oom_reaper freezable
After "oom: clear TIF_MEMDIE after oom_reaper managed to unmap the
address space" oom_reaper will call exit_oom_victim on the target task
after it is done.  This might however race with the PM freezer:

CPU0				CPU1				CPU2
freeze_processes
  try_to_freeze_tasks
  				# Allocation request
				out_of_memory
  oom_killer_disable
				  wake_oom_reaper(P1)
				  				__oom_reap_task
								  exit_oom_victim(P1)
    wait_event(oom_victims==0)
[...]
    				do_exit(P1)
				  perform IO/interfere with the freezer

which breaks the oom_killer_disable semantic.  We no longer have a
guarantee that the oom victim won't interfere with the freezer because
it might be anywhere on the way to do_exit while the freezer thinks the
task has already terminated.  It might trigger IO or touch devices which
are frozen already.

In order to close this race, make the oom_reaper thread freezable.  This
will work because
	a) already running oom_reaper will block freezer to enter the
	   quiescent state
	b) wake_oom_reaper will not wake up the reaper after it has been
	   frozen
	c) the only way to call exit_oom_victim after try_to_freeze_tasks
	   is from the oom victim's context when we know the further
	   interference shouldn't be possible

Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Vladimir Davydov
29c696e1c6 oom: make oom_reaper_list single linked
Entries are only added/removed from oom_reaper_list at head so we can
use a single linked list and hence save a word in task_struct.

Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Michal Hocko
855b018325 oom, oom_reaper: disable oom_reaper for oom_kill_allocating_task
Tetsuo has reported that oom_kill_allocating_task=1 will cause
oom_reaper_list corruption because oom_kill_process doesn't follow
standard OOM exclusion (aka ignores TIF_MEMDIE) and allows to enqueue
the same task multiple times - e.g.  by sacrificing the same child
multiple times.

This patch fixes the issue by introducing a new MMF_OOM_KILLED mm flag
which is set in oom_kill_process atomically and oom reaper is disabled
if the flag was already set.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Michal Hocko
03049269de mm, oom_reaper: implement OOM victims queuing
wake_oom_reaper has allowed only 1 oom victim to be queued.  The main
reason for that was the simplicity as other solutions would require some
way of queuing.  The current approach is racy and that was deemed
sufficient as the oom_reaper is considered a best effort approach to
help with oom handling when the OOM victim cannot terminate in a
reasonable time.  The race could lead to missing an oom victim which can
get stuck

out_of_memory
  wake_oom_reaper
    cmpxchg // OK
    			oom_reaper
			  oom_reap_task
			    __oom_reap_task
oom_victim terminates
			      atomic_inc_not_zero // fail
out_of_memory
  wake_oom_reaper
    cmpxchg // fails
			  task_to_reap = NULL

This race requires 2 OOM invocations in a short time period which is not
very likely but certainly not impossible.  E.g.  the original victim
might have not released a lot of memory for some reason.

The situation would improve considerably if wake_oom_reaper used a more
robust queuing.  This is what this patch implements.  This means adding
oom_reaper_list list_head into task_struct (eat a hole before embeded
thread_struct for that purpose) and a oom_reaper_lock spinlock for
queuing synchronization.  wake_oom_reaper will then add the task on the
queue and oom_reaper will dequeue it.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Andrea Argangeli <andrea@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Michal Hocko
bc448e897b mm, oom_reaper: report success/failure
Inform about the successful/failed oom_reaper attempts and dump all the
held locks to tell us more who is blocking the progress.

[akpm@linux-foundation.org: fix CONFIG_MMU=n build]
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Andrea Argangeli <andrea@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Michal Hocko
36324a990c oom: clear TIF_MEMDIE after oom_reaper managed to unmap the address space
When oom_reaper manages to unmap all the eligible vmas there shouldn't
be much of the freable memory held by the oom victim left anymore so it
makes sense to clear the TIF_MEMDIE flag for the victim and allow the
OOM killer to select another task.

The lack of TIF_MEMDIE also means that the victim cannot access memory
reserves anymore but that shouldn't be a problem because it would get
the access again if it needs to allocate and hits the OOM killer again
due to the fatal_signal_pending resp.  PF_EXITING check.  We can safely
hide the task from the OOM killer because it is clearly not a good
candidate anymore as everyhing reclaimable has been torn down already.

This patch will allow to cap the time an OOM victim can keep TIF_MEMDIE
and thus hold off further global OOM killer actions granted the oom
reaper is able to take mmap_sem for the associated mm struct.  This is
not guaranteed now but further steps should make sure that mmap_sem for
write should be blocked killable which will help to reduce such a lock
contention.  This is not done by this patch.

Note that exit_oom_victim might be called on a remote task from
__oom_reap_task now so we have to check and clear the flag atomically
otherwise we might race and underflow oom_victims or wake up waiters too
early.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Andrea Argangeli <andrea@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Michal Hocko
aac4536355 mm, oom: introduce oom reaper
This patch (of 5):

This is based on the idea from Mel Gorman discussed during LSFMM 2015
and independently brought up by Oleg Nesterov.

The OOM killer currently allows to kill only a single task in a good
hope that the task will terminate in a reasonable time and frees up its
memory.  Such a task (oom victim) will get an access to memory reserves
via mark_oom_victim to allow a forward progress should there be a need
for additional memory during exit path.

It has been shown (e.g.  by Tetsuo Handa) that it is not that hard to
construct workloads which break the core assumption mentioned above and
the OOM victim might take unbounded amount of time to exit because it
might be blocked in the uninterruptible state waiting for an event (e.g.
lock) which is blocked by another task looping in the page allocator.

This patch reduces the probability of such a lockup by introducing a
specialized kernel thread (oom_reaper) which tries to reclaim additional
memory by preemptively reaping the anonymous or swapped out memory owned
by the oom victim under an assumption that such a memory won't be needed
when its owner is killed and kicked from the userspace anyway.  There is
one notable exception to this, though, if the OOM victim was in the
process of coredumping the result would be incomplete.  This is
considered a reasonable constrain because the overall system health is
more important than debugability of a particular application.

A kernel thread has been chosen because we need a reliable way of
invocation so workqueue context is not appropriate because all the
workers might be busy (e.g.  allocating memory).  Kswapd which sounds
like another good fit is not appropriate as well because it might get
blocked on locks during reclaim as well.

oom_reaper has to take mmap_sem on the target task for reading so the
solution is not 100% because the semaphore might be held or blocked for
write but the probability is reduced considerably wrt.  basically any
lock blocking forward progress as described above.  In order to prevent
from blocking on the lock without any forward progress we are using only
a trylock and retry 10 times with a short sleep in between.  Users of
mmap_sem which need it for write should be carefully reviewed to use
_killable waiting as much as possible and reduce allocations requests
done with the lock held to absolute minimum to reduce the risk even
further.

The API between oom killer and oom reaper is quite trivial.
wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only
NULL->mm transition and oom_reaper clear this atomically once it is done
with the work.  This means that only a single mm_struct can be reaped at
the time.  As the operation is potentially disruptive we are trying to
limit it to the ncessary minimum and the reaper blocks any updates while
it operates on an mm.  mm_struct is pinned by mm_count to allow parallel
exit_mmap and a race is detected by atomic_inc_not_zero(mm_users).

Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Mel Gorman <mgorman@suse.de>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Argangeli <andrea@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Piotr Kwapulinski
f138556daf mm/mprotect.c: don't imply PROT_EXEC on non-exec fs
The mprotect(PROT_READ) fails when called by the READ_IMPLIES_EXEC
binary on a memory mapped file located on non-exec fs.  The mprotect
does not check whether fs is _executable_ or not.  The PROT_EXEC flag is
set automatically even if a memory mapped file is located on non-exec
fs.  Fix it by checking whether a memory mapped file is located on a
non-exec fs.  If so the PROT_EXEC is not implied by the PROT_READ.  The
implementation uses the VM_MAYEXEC flag set properly in mmap.  Now it is
consistent with mmap.

I did the isolated tests (PT_GNU_STACK X/NX, multiple VMAs, X/NX fs).  I
also patched the official 3.19.0-47-generic Ubuntu 14.04 kernel and it
seems to work.

Signed-off-by: Piotr Kwapulinski <kwapulinski.piotr@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Dmitry Vyukov
5c9a8750a6 kernel: add kcov code coverage
kcov provides code coverage collection for coverage-guided fuzzing
(randomized testing).  Coverage-guided fuzzing is a testing technique
that uses coverage feedback to determine new interesting inputs to a
system.  A notable user-space example is AFL
(http://lcamtuf.coredump.cx/afl/).  However, this technique is not
widely used for kernel testing due to missing compiler and kernel
support.

kcov does not aim to collect as much coverage as possible.  It aims to
collect more or less stable coverage that is function of syscall inputs.
To achieve this goal it does not collect coverage in soft/hard
interrupts and instrumentation of some inherently non-deterministic or
non-interesting parts of kernel is disbled (e.g.  scheduler, locking).

Currently there is a single coverage collection mode (tracing), but the
API anticipates additional collection modes.  Initially I also
implemented a second mode which exposes coverage in a fixed-size hash
table of counters (what Quentin used in his original patch).  I've
dropped the second mode for simplicity.

This patch adds the necessary support on kernel side.  The complimentary
compiler support was added in gcc revision 231296.

We've used this support to build syzkaller system call fuzzer, which has
found 90 kernel bugs in just 2 months:

  https://github.com/google/syzkaller/wiki/Found-Bugs

We've also found 30+ bugs in our internal systems with syzkaller.
Another (yet unexplored) direction where kcov coverage would greatly
help is more traditional "blob mutation".  For example, mounting a
random blob as a filesystem, or receiving a random blob over wire.

Why not gcov.  Typical fuzzing loop looks as follows: (1) reset
coverage, (2) execute a bit of code, (3) collect coverage, repeat.  A
typical coverage can be just a dozen of basic blocks (e.g.  an invalid
input).  In such context gcov becomes prohibitively expensive as
reset/collect coverage steps depend on total number of basic
blocks/edges in program (in case of kernel it is about 2M).  Cost of
kcov depends only on number of executed basic blocks/edges.  On top of
that, kernel requires per-thread coverage because there are always
background threads and unrelated processes that also produce coverage.
With inlined gcov instrumentation per-thread coverage is not possible.

kcov exposes kernel PCs and control flow to user-space which is
insecure.  But debugfs should not be mapped as user accessible.

Based on a patch by Quentin Casasnovas.

[akpm@linux-foundation.org: make task_struct.kcov_mode have type `enum kcov_mode']
[akpm@linux-foundation.org: unbreak allmodconfig]
[akpm@linux-foundation.org: follow x86 Makefile layout standards]
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Tavis Ormandy <taviso@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@google.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: David Drysdale <drysdale@google.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Minchan Kim
3f2b1a04f4 zram: revive swap_slot_free_notify
Commit b430e9d1c6 ("remove compressed copy from zram in-memory")
applied swap_slot_free_notify call in *end_swap_bio_read* to remove
duplicated memory between zram and memory.

However, with the introduction of rw_page in zram: 8c7f01025f ("zram:
implement rw_page operation of zram"), it became void because rw_page
doesn't need bio.

Memory footprint is really important in embedded platforms which have
small memory, for example, 512M) recently because it could start to kill
processes if memory footprint exceeds some threshold by LMK or some
similar memory management modules.

This patch restores the function for rw_page, thereby eliminating this
duplication.

Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: karam.lee <karam.lee@lge.com>
Cc: <sangseok.lee@lge.com>
Cc: Chan Jeong <chan.jeong@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Linus Torvalds
266c73b777 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "This is the main drm pull request for 4.6 kernel.

  Overall the coolest thing here for me is the nouveau maxwell signed
  firmware support from NVidia, it's taken a long while to extract this
  from them.

  I also wish the ARM vendors just designed one set of display IP, ARM
  display block proliferation is definitely increasing.

  Core:
     - drm_event cleanups
     - Internal API cleanup making mode_fixup optional.
     - Apple GMUX vga switcheroo support.
     - DP AUX testing interface

  Panel:
     - Refactoring of DSI core for use over more transports.

  New driver:
     - ARM hdlcd driver

  i915:
     - FBC/PSR (framebuffer compression, panel self refresh) enabled by default.
     - Ongoing atomic display support work
     - Ongoing runtime PM work
     - Pixel clock limit checks
     - VBT DSI description support
     - GEM fixes
     - GuC firmware scheduler enhancements

  amdkfd:
     - Deferred probing fixes to avoid make file or link ordering.

  amdgpu/radeon:
     - ACP support for i2s audio support.
     - Command Submission/GPU scheduler/GPUVM optimisations
     - Initial GPU reset support for amdgpu

  vmwgfx:
     - Support for DX10 gen mipmaps
     - Pageflipping and other fixes.

  exynos:
     - Exynos5420 SoC support for FIMD
     - Exynos5422 SoC support for MIPI-DSI

  nouveau:
     - GM20x secure boot support - adds acceleration for Maxwell GPUs.
     - GM200 support
     - GM20B clock driver support
     - Power sensors work

  etnaviv:
     - Correctness fixes for GPU cache flushing
     - Better support for i.MX6 systems.

  imx-drm:
     - VBlank IRQ support
     - Fence support
     - OF endpoint support

  msm:
     - HDMI support for 8996 (snapdragon 820)
     - Adreno 430 support
     - Timestamp queries support

  virtio-gpu:
     - Fixes for Android support.

  rockchip:
     - Add support for Innosilicion HDMI

  rcar-du:
     - Support for 4 crtcs
     - R8A7795 support
     - RCar Gen 3 support

  omapdrm:
     - HDMI interlace output support
     - dma-buf import support
     - Refactoring to remove a lot of legacy code.

  tilcdc:
     - Rewrite of pageflipping code
     - dma-buf support
     - pinctrl support

  vc4:
     - HDMI modesetting bug fixes
     - Significant 3D performance improvement.

  fsl-dcu (FreeScale):
     - Lots of fixes

  tegra:
     - Two small fixes

  sti:
     - Atomic support for planes
     - Improved HDMI support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1063 commits)
  drm/amdgpu: release_pages requires linux/pagemap.h
  drm/sti: restore mode_fixup callback
  drm/amdgpu/gfx7: add MTYPE definition
  drm/amdgpu: removing BO_VAs shouldn't be interruptible
  drm/amd/powerplay: show uvd/vce power gate enablement for tonga.
  drm/amd/powerplay: show uvd/vce power gate info for fiji
  drm/amdgpu: use sched fence if possible
  drm/amdgpu: move ib.fence to job.fence
  drm/amdgpu: give a fence param to ib_free
  drm/amdgpu: include the right version of gmc header files for iceland
  drm/radeon: fix indentation.
  drm/amd/powerplay: add uvd/vce dpm enabling flag to fix the performance issue for CZ
  drm/amdgpu: switch back to 32bit hw fences v2
  drm/amdgpu: remove amdgpu_fence_is_signaled
  drm/amdgpu: drop the extra fence range check v2
  drm/amdgpu: signal fences directly in amdgpu_fence_process
  drm/amdgpu: cleanup amdgpu_fence_wait_empty v2
  drm/amdgpu: keep all fences in an RCU protected array v2
  drm/amdgpu: add number of hardware submissions to amdgpu_fence_driver_init_ring
  drm/amdgpu: RCU protected amd_sched_fence_release
  ...
2016-03-21 13:48:00 -07:00
Linus Torvalds
643ad15d47 Merge branch 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 protection key support from Ingo Molnar:
 "This tree adds support for a new memory protection hardware feature
  that is available in upcoming Intel CPUs: 'protection keys' (pkeys).

  There's a background article at LWN.net:

      https://lwn.net/Articles/643797/

  The gist is that protection keys allow the encoding of
  user-controllable permission masks in the pte.  So instead of having a
  fixed protection mask in the pte (which needs a system call to change
  and works on a per page basis), the user can map a (handful of)
  protection mask variants and can change the masks runtime relatively
  cheaply, without having to change every single page in the affected
  virtual memory range.

  This allows the dynamic switching of the protection bits of large
  amounts of virtual memory, via user-space instructions.  It also
  allows more precise control of MMU permission bits: for example the
  executable bit is separate from the read bit (see more about that
  below).

  This tree adds the MM infrastructure and low level x86 glue needed for
  that, plus it adds a high level API to make use of protection keys -
  if a user-space application calls:

        mmap(..., PROT_EXEC);

  or

        mprotect(ptr, sz, PROT_EXEC);

  (note PROT_EXEC-only, without PROT_READ/WRITE), the kernel will notice
  this special case, and will set a special protection key on this
  memory range.  It also sets the appropriate bits in the Protection
  Keys User Rights (PKRU) register so that the memory becomes unreadable
  and unwritable.

  So using protection keys the kernel is able to implement 'true'
  PROT_EXEC on x86 CPUs: without protection keys PROT_EXEC implies
  PROT_READ as well.  Unreadable executable mappings have security
  advantages: they cannot be read via information leaks to figure out
  ASLR details, nor can they be scanned for ROP gadgets - and they
  cannot be used by exploits for data purposes either.

  We know about no user-space code that relies on pure PROT_EXEC
  mappings today, but binary loaders could start making use of this new
  feature to map binaries and libraries in a more secure fashion.

  There is other pending pkeys work that offers more high level system
  call APIs to manage protection keys - but those are not part of this
  pull request.

  Right now there's a Kconfig that controls this feature
  (CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) that is default enabled
  (like most x86 CPU feature enablement code that has no runtime
  overhead), but it's not user-configurable at the moment.  If there's
  any serious problem with this then we can make it configurable and/or
  flip the default"

* 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
  x86/mm/pkeys: Fix mismerge of protection keys CPUID bits
  mm/pkeys: Fix siginfo ABI breakage caused by new u64 field
  x86/mm/pkeys: Fix access_error() denial of writes to write-only VMA
  mm/core, x86/mm/pkeys: Add execute-only protection keys support
  x86/mm/pkeys: Create an x86 arch_calc_vm_prot_bits() for VMA flags
  x86/mm/pkeys: Allow kernel to modify user pkey rights register
  x86/fpu: Allow setting of XSAVE state
  x86/mm: Factor out LDT init from context init
  mm/core, x86/mm/pkeys: Add arch_validate_pkey()
  mm/core, arch, powerpc: Pass a protection key in to calc_vm_flag_bits()
  x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU
  x86/mm/pkeys: Add Kconfig prompt to existing config option
  x86/mm/pkeys: Dump pkey from VMA in /proc/pid/smaps
  x86/mm/pkeys: Dump PKRU with other kernel registers
  mm/core, x86/mm/pkeys: Differentiate instruction fetches
  x86/mm/pkeys: Optimize fault handling in access_error()
  mm/core: Do not enforce PKEY permissions on remote mm access
  um, pkeys: Add UML arch_*_access_permitted() methods
  mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys
  x86/mm/gup: Simplify get_user_pages() PTE bit handling
  ...
2016-03-20 19:08:56 -07:00
Linus Torvalds
d5e2d00898 powerpc updates for 4.6
Highlights:
  - Restructure Linux PTE on Book3S/64 to Radix format from Paul Mackerras
  - Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh Kumar K.V
  - Add POWER9 cputable entry from Michael Neuling
  - FPU/Altivec/VSX save/restore optimisations from Cyril Bur
  - Add support for new ftrace ABI on ppc64le from Torsten Duwe
 
 Various cleanups & minor fixes from:
  - Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy, Cyril
    Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell Currey,
    Sukadev Bhattiprolu, Suraj Jitindar Singh.
 
 General:
  - atomics: Allow architectures to define their own __atomic_op_* helpers from
    Boqun Feng
  - Implement atomic{, 64}_*_return_* variants and acquire/release/relaxed
    variants for (cmp)xchg from Boqun Feng
  - Add powernv_defconfig from Jeremy Kerr
  - Fix BUG_ON() reporting in real mode from Balbir Singh
  - Add xmon command to dump OPAL msglog from Andrew Donnellan
  - Add xmon command to dump process/task similar to ps(1) from Douglas Miller
  - Clean up memory hotplug failure paths from David Gibson
 
 pci/eeh:
  - Redesign SR-IOV on PowerNV to give absolute isolation between VFs from Wei
    Yang.
  - EEH Support for SRIOV VFs from Wei Yang and Gavin Shan.
  - PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang
  - PCI: Add pcibios_bus_add_device() weak function from Wei Yang
  - MAINTAINERS: Update EEH details and maintainership from Russell Currey
 
 cxl:
  - Support added to the CXL driver for running on both bare-metal and
    hypervisor systems, from Christophe Lombard and Frederic Barrat.
  - Ignore probes for virtual afu pci devices from Vaibhav Jain
 
 perf:
  - Export Power8 generic and cache events to sysfs from Sukadev Bhattiprolu
  - hv-24x7: Fix usage with chip events, display change in counter values,
    display domain indices in sysfs, eliminate domain suffix in event names,
    from Sukadev Bhattiprolu
 
 Freescale:
  - Updates from Scott: "Highlights include 8xx optimizations, 32-bit checksum
    optimizations, 86xx consolidation, e5500/e6500 cpu hotplug, more fman and
    other dt bits, and minor fixes/cleanup."
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW69OrAAoJEFHr6jzI4aWAe5EQAJw/hE6WBQc6a7Tj70AnXOqR
 qk/m5pZjuTwQxfBteIvHR1pE5eXdlvtAjcD254LVkFkAbIn19W/h2k0VX/nlee7P
 n/VRHRifjtGmukqHrPYJJ7ua9mNlY7pxh3leGSixBFASnSWqMxNNNziNQtSTcuCs
 TjHiw6NkZ/kzeunA4bAfE4yHVUZjmL74oiS9JbLyaVHqoW4fqWLlh26AKo2yYMZI
 qPicBBG4HBi3FGvoexnKxlJNdcV4HO7LzDjJmCSfUKYCJi+Pw19T5qmhso0q0qVz
 vHg/A8HNeG4Hn83pNVmLeQSAIQRZ3DvTtcLgbjPo+TVwm/hzrRRBWipTeOVbkLW8
 2bcOXT4t7LWUq15EAJ1LYgYZGzcLrfRfUeOcuQ1TWd3+PcfY9pE7FmizsxAAfaVe
 E9j9mpz4XnIqBtWkFHneTIHkQ5OWptyKuZJEaYH0nut4VsP0k8NarkseafGqBPu7
 5eG83gbiQbCVixfOgblV9eocJ29JcwpjPAY4CZSGJimShg909FV7WRgZgJkKWrbK
 dBRco8Jcp4VglGfo2qymv7Uj4KwQoypBREOhiKUvrAsVlDxPfx+bcskhjGu9xGDC
 xs/+nme0/lKa/wg5K4C3mQ1GAlkMWHI0ojhJjsyODbetup5UbkEu03wjAaTdO9dT
 Y6ptGm0rYAJluPNlziFj
 =qkAt
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "This was delayed a day or two by some build-breakage on old toolchains
  which we've now fixed.

  There's two PCI commits both acked by Bjorn.

  There's one commit to mm/hugepage.c which is (co)authored by Kirill.

  Highlights:
   - Restructure Linux PTE on Book3S/64 to Radix format from Paul
     Mackerras
   - Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh
     Kumar K.V
   - Add POWER9 cputable entry from Michael Neuling
   - FPU/Altivec/VSX save/restore optimisations from Cyril Bur
   - Add support for new ftrace ABI on ppc64le from Torsten Duwe

  Various cleanups & minor fixes from:
   - Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy,
     Cyril Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell
     Currey, Sukadev Bhattiprolu, Suraj Jitindar Singh.

  General:
   - atomics: Allow architectures to define their own __atomic_op_*
     helpers from Boqun Feng
   - Implement atomic{, 64}_*_return_* variants and acquire/release/
     relaxed variants for (cmp)xchg from Boqun Feng
   - Add powernv_defconfig from Jeremy Kerr
   - Fix BUG_ON() reporting in real mode from Balbir Singh
   - Add xmon command to dump OPAL msglog from Andrew Donnellan
   - Add xmon command to dump process/task similar to ps(1) from Douglas
     Miller
   - Clean up memory hotplug failure paths from David Gibson

  pci/eeh:
   - Redesign SR-IOV on PowerNV to give absolute isolation between VFs
     from Wei Yang.
   - EEH Support for SRIOV VFs from Wei Yang and Gavin Shan.
   - PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang
   - PCI: Add pcibios_bus_add_device() weak function from Wei Yang
   - MAINTAINERS: Update EEH details and maintainership from Russell
     Currey

  cxl:
   - Support added to the CXL driver for running on both bare-metal and
     hypervisor systems, from Christophe Lombard and Frederic Barrat.
   - Ignore probes for virtual afu pci devices from Vaibhav Jain

  perf:
   - Export Power8 generic and cache events to sysfs from Sukadev
     Bhattiprolu
   - hv-24x7: Fix usage with chip events, display change in counter
     values, display domain indices in sysfs, eliminate domain suffix in
     event names, from Sukadev Bhattiprolu

  Freescale:
   - Updates from Scott: "Highlights include 8xx optimizations, 32-bit
     checksum optimizations, 86xx consolidation, e5500/e6500 cpu
     hotplug, more fman and other dt bits, and minor fixes/cleanup"

* tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits)
  powerpc: Fix unrecoverable SLB miss during restore_math()
  powerpc/8xx: Fix do_mtspr_cpu6() build on older compilers
  powerpc/rcpm: Fix build break when SMP=n
  powerpc/book3e-64: Use hardcoded mttmr opcode
  powerpc/fsl/dts: Add "jedec,spi-nor" flash compatible
  powerpc/T104xRDB: add tdm riser card node to device tree
  powerpc32: PAGE_EXEC required for inittext
  powerpc/mpc85xx: Add pcsphy nodes to FManV3 device tree
  powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s)
  powerpc/86xx: Introduce and use common dtsi
  powerpc/86xx: Update device tree
  powerpc/86xx: Move dts files to fsl directory
  powerpc/86xx: Switch to kconfig fragments approach
  powerpc/86xx: Update defconfigs
  powerpc/86xx: Consolidate common platform code
  powerpc32: Remove one insn in mulhdu
  powerpc32: small optimisation in flush_icache_range()
  powerpc: Simplify test in __dma_sync()
  powerpc32: move xxxxx_dcache_range() functions inline
  powerpc32: Remove clear_pages() and define clear_page() inline
  ...
2016-03-19 15:38:41 -07:00
Linus Torvalds
814a2bf957 Merge branch 'akpm' (patches from Andrew)
Merge second patch-bomb from Andrew Morton:

 - a couple of hotfixes

 - the rest of MM

 - a new timer slack control in procfs

 - a couple of procfs fixes

 - a few misc things

 - some printk tweaks

 - lib/ updates, notably to radix-tree.

 - add my and Nick Piggin's old userspace radix-tree test harness to
   tools/testing/radix-tree/.  Matthew said it was a godsend during the
   radix-tree work he did.

 - a few code-size improvements, switching to __always_inline where gcc
   screwed up.

 - partially implement character sets in sscanf

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
  sscanf: implement basic character sets
  lib/bug.c: use common WARN helper
  param: convert some "on"/"off" users to strtobool
  lib: add "on"/"off" support to kstrtobool
  lib: update single-char callers of strtobool()
  lib: move strtobool() to kstrtobool()
  include/linux/unaligned: force inlining of byteswap operations
  include/uapi/linux/byteorder, swab: force inlining of some byteswap operations
  include/asm-generic/atomic-long.h: force inlining of some atomic_long operations
  usb: common: convert to use match_string() helper
  ide: hpt366: convert to use match_string() helper
  ata: hpt366: convert to use match_string() helper
  power: ab8500: convert to use match_string() helper
  power: charger_manager: convert to use match_string() helper
  drm/edid: convert to use match_string() helper
  pinctrl: convert to use match_string() helper
  device property: convert to use match_string() helper
  lib/string: introduce match_string() helper
  radix-tree tests: add test for radix_tree_iter_next
  radix-tree tests: add regression3 test
  ...
2016-03-18 19:26:54 -07:00
Linus Torvalds
49dc2b7173 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  drivers/rtc: broken link fix
  drm/i915 Fix typos in i915_gem_fence.c
  Docs: fix missing word in REPORTING-BUGS
  lib+mm: fix few spelling mistakes
  MAINTAINERS: add git URL for APM driver
  treewide: Fix typo in printk
2016-03-17 21:38:27 -07:00
Matthew Wilcox
7165092fe5 radix-tree,shmem: introduce radix_tree_iter_next()
shmem likes to occasionally drop the lock, schedule, then reacqire the
lock and continue with the iteration from the last place it left off.
This is currently done with a pretty ugly goto.  Introduce
radix_tree_iter_next() and use it throughout shmem.c.

[koct9i@gmail.com: fix bug in radix_tree_iter_next() for tagged iteration]
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Matthew Wilcox
2cf938aae1 mm: use radix_tree_iter_retry()
Instead of a 'goto restart', we can now use radix_tree_iter_retry() to
restart from our current position.  This will make a difference when
there are more ways to happen across an indirect pointer.  And it
eliminates some confusing gotos.

[vbabka@suse.cz: remove now-obsolete-and-misleading comment]
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Matthew Wilcox
e614523653 radix_tree: add support for multi-order entries
With huge pages, it is convenient to have the radix tree be able to
return an entry that covers multiple indices.  Previous attempts to deal
with the problem have involved inserting N duplicate entries, which is a
waste of memory and leads to problems trying to handle aliased tags, or
probing the tree multiple times to find alternative entries which might
cover the requested index.

This approach inserts one canonical entry into the tree for a given
range of indices, and may also insert other entries in order to ensure
that lookups find the canonical entry.

This solution only tolerates inserting powers of two that are greater
than the fanout of the tree.  If we wish to expand the radix tree's
abilities to support large-ish pages that is less than the fanout at the
penultimate level of the tree, then we would need to add one more step
in lookup to ensure that any sibling nodes in the final level of the
tree are dereferenced and we return the canonical entry that they
reference.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Christoph Lameter
93e205a728 fix Christoph's email addresses
There are various email addresses for me throughout the kernel.  Use the
one that will always be valid.

Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Tetsuo Handa
0a687aace3 mm,oom: do not loop !__GFP_FS allocation if the OOM killer is disabled
After the OOM killer is disabled during suspend operation, any
!__GFP_NOFAIL && __GFP_FS allocations are forced to fail.  Thus, any
!__GFP_NOFAIL && !__GFP_FS allocations should be forced to fail as well.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Tetsuo Handa
6afcf2895e mm,oom: make oom_killer_disable() killable
While oom_killer_disable() is called by freeze_processes() after all
user threads except the current thread are frozen, it is possible that
kernel threads invoke the OOM killer and sends SIGKILL to the current
thread due to sharing the thawed victim's memory.  Therefore, checking
for SIGKILL is preferable than TIF_MEMDIE.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Sergey Senozhatsky
1120ed5483 mm/zsmalloc: add `freeable' column to pool stat
Add a new column to pool stats, which will tell how many pages ideally
can be freed by class compaction, so it will be easier to analyze
zsmalloc fragmentation.

At the moment, we have only numbers of FULL and ALMOST_EMPTY classes,
but they don't tell us how badly the class is fragmented internally.

The new /sys/kernel/debug/zsmalloc/zramX/classes output look as follows:

 class  size almost_full almost_empty obj_allocated   obj_used pages_used pages_per_zspage freeable
[..]
    12   224           0            2           146          5          8                4        4
    13   240           0            0             0          0          0                1        0
    14   256           1           13          1840       1672        115                1       10
    15   272           0            0             0          0          0                1        0
[..]
    49   816           0            3           745        735        149                1        2
    51   848           3            4           361        306         76                4        8
    52   864          12           14           378        268         81                3       21
    54   896           1           12           117         57         26                2       12
    57   944           0            0             0          0          0                3        0
[..]
 Total                26          131         12709      10994       1071                       134

For example, from this particular output we can easily conclude that
class-896 is heavily fragmented -- it occupies 26 pages, 12 can be freed
by compaction.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
YiPing Xu
a82cbf0713 zsmalloc: drop unused member 'mapping_area->huge'
When unmapping a huge class page in zs_unmap_object, the page will be
unmapped by kmap_atomic.  the "!area->huge" branch in __zs_unmap_object
is alway true, and no code set "area->huge" now, so we can drop it.

Signed-off-by: YiPing Xu <xuyiping@huawei.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Shawn Lin
a1c0b1a074 mm/vmalloc: use PAGE_ALIGNED() to check PAGE_SIZE alignment
We have PAGE_ALIGNED() in mm.h, so let's use it instead of IS_ALIGNED()
for checking PAGE_SIZE aligned case.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Vladimir Davydov
e0775d10f1 mm: memcontrol: zap oom_info_lock
mem_cgroup_print_oom_info is always called under oom_lock, so
oom_info_lock is redundant.

Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Johannes Weiner
8b5926560f mm: memcontrol: clarify the uncharge_list() loop
uncharge_list() does an unusual list walk because the function can take
regular lists with dedicated list_heads as well as singleton lists where
a single page is passed via the page->lru list node.

This can sometimes lead to confusion as well as suggestions to replace
the loop with a list_for_each_entry(), which wouldn't work.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Johannes Weiner
b6e6edcfa4 mm: memcontrol: reclaim and OOM kill when shrinking memory.max below usage
Setting the original memory.limit_in_bytes hardlimit is subject to a
race condition when the desired value is below the current usage.  The
code tries a few times to first reclaim and then see if the usage has
dropped to where we would like it to be, but there is no locking, and
the workload is free to continue making new charges up to the old limit.
Thus, attempting to shrink a workload relies on pure luck and hope that
the workload happens to cooperate.

To fix this in the cgroup2 memory.max knob, do it the other way round:
set the limit first, then try enforcement.  And if reclaim is not able
to succeed, trigger OOM kills in the group.  Keep going until the new
limit is met, we run out of OOM victims and there's only unreclaimable
memory left, or the task writing to memory.max is killed.  This allows
users to shrink groups reliably, and the behavior is consistent with
what happens when new charges are attempted in excess of memory.max.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Johannes Weiner
588083bb37 mm: memcontrol: reclaim when shrinking memory.high below usage
When setting memory.high below usage, nothing happens until the next
charge comes along, and then it will only reclaim its own charge and not
the now potentially huge excess of the new memory.high.  This can cause
groups to stay in excess of their memory.high indefinitely.

To fix that, when shrinking memory.high, kick off a reclaim cycle that
goes after the delta.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Li Zhang
987b3095c2 mm: meminit: initialise more memory for inode/dentry hash tables in early boot
Upstream has supported page parallel initialisation for X86 and the boot
time is improved greately.  Some tests have been done for Power.

Here is the result I have done with different memory size.

* 4GB memory:
    boot time is as the following:
    with patch vs without patch: 10.4s vs 24.5s
    boot time is improved 57%
* 200GB memory:
    boot time looks the same with and without patches.
    boot time is about 38s
* 32TB memory:
    boot time looks the same with and without patches
    boot time is about 160s.
    The boot time is much shorter than X86 with 24TB memory.
    From community discussion, it costs about 694s for X86 24T system.

Parallel initialisation improves the performance by deferring memory
initilisation to kswap with N kthreads, it should improve the performance
therotically.

In testing on X86, performance is improved greatly with huge memory.  But
on Power platform, it is improved greatly with less than 100GB memory.
For huge memory, it is not improved greatly.  But it saves the time with
several threads at least, as the following information shows(32TB system
log):

[   22.648169] node 9 initialised, 16607461 pages in 280ms
[   22.783772] node 3 initialised, 23937243 pages in 410ms
[   22.858877] node 6 initialised, 29179347 pages in 490ms
[   22.863252] node 2 initialised, 29179347 pages in 490ms
[   22.907545] node 0 initialised, 32049614 pages in 540ms
[   22.920891] node 15 initialised, 32212280 pages in 550ms
[   22.923236] node 4 initialised, 32306127 pages in 550ms
[   22.923384] node 12 initialised, 32314319 pages in 550ms
[   22.924754] node 8 initialised, 32314319 pages in 550ms
[   22.940780] node 13 initialised, 33353677 pages in 570ms
[   22.940796] node 11 initialised, 33353677 pages in 570ms
[   22.941700] node 5 initialised, 33353677 pages in 570ms
[   22.941721] node 10 initialised, 33353677 pages in 570ms
[   22.941876] node 7 initialised, 33353677 pages in 570ms
[   22.944946] node 14 initialised, 33353677 pages in 570ms
[   22.946063] node 1 initialised, 33345485 pages in 580ms

It saves the time about 550*16 ms at least, although it can be ignore to
compare the boot time about 160 seconds.  What's more, the boot time is
much shorter on Power even without patches than x86 for huge memory
machine.

So this patchset is still necessary to be enabled for Power.

This patch (of 2):

This patch is based on Mel Gorman's old patch in the mailing list,
https://lkml.org/lkml/2015/5/5/280 which is discussed but it is fixed with
a completion to wait for all memory initialised in page_alloc_init_late().
It is to fix the OOM problem on X86 with 24TB memory which allocates
memory in late initialisation.  But for Power platform with 32TB memory,
it causes a call trace in vfs_caches_init->inode_init() and inode hash
table needs more memory.  So this patch allocates 1GB for 0.25TB/node for
large system as it is mentioned in https://lkml.org/lkml/2015/5/1/627

This call trace is found on Power with 32TB memory, 1024CPUs, 16nodes.
Currently, it only allocates 2GB*16=32GB for early initialisation.  But
Dentry cache hash table needes 16GB and Inode cache hash table needs 16GB.
So the system have no enough memory for it.  The log from dmesg as the
following:

  Dentry cache hash table entries: 2147483648 (order: 18,17179869184 bytes)
  vmalloc: allocation failure, allocated 16021913600 of 17179934720 bytes
  swapper/0: page allocation failure: order:0,mode:0x2080020
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.0-0-ppc64
  Call Trace:
    .dump_stack+0xb4/0xb664 (unreliable)
    .warn_alloc_failed+0x114/0x160
    .__vmalloc_area_node+0x1a4/0x2b0
    .__vmalloc_node_range+0xe4/0x110
    .__vmalloc_node+0x40/0x50
    .alloc_large_system_hash+0x134/0x2a4
    .inode_init+0xa4/0xf0
    .vfs_caches_init+0x80/0x144
    .start_kernel+0x40c/0x4e0
    start_here_common+0x20/0x4a4

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Kirill A. Shutemov
5f7377147c thp: fix deadlock in split_huge_pmd()
split_huge_pmd() tries to munlock page with munlock_vma_page().  That
requires the page to locked.

If the is locked by caller, we would get a deadlock:

	Unable to find swap-space signature
	INFO: task trinity-c85:1907 blocked for more than 120 seconds.
	      Not tainted 4.4.0-00032-gf19d0bdced41-dirty #1606
	"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
	trinity-c85     D ffff88084d997608     0  1907    309 0x00000000
	Call Trace:
	  schedule+0x9f/0x1c0
	  schedule_timeout+0x48e/0x600
	  io_schedule_timeout+0x1c3/0x390
	  bit_wait_io+0x29/0xd0
	  __wait_on_bit_lock+0x94/0x140
	  __lock_page+0x1d4/0x280
	  __split_huge_pmd+0x5a8/0x10f0
	  split_huge_pmd_address+0x1d9/0x230
	  try_to_unmap_one+0x540/0xc70
	  rmap_walk_anon+0x284/0x810
	  rmap_walk_locked+0x11e/0x190
	  try_to_unmap+0x1b1/0x4b0
	  split_huge_page_to_list+0x49d/0x18a0
	  follow_page_mask+0xa36/0xea0
	  SyS_move_pages+0xaf3/0x1570
	  entry_SYSCALL_64_fastpath+0x12/0x6b
	2 locks held by trinity-c85/1907:
	 #0:  (&mm->mmap_sem){++++++}, at:  SyS_move_pages+0x933/0x1570
	 #1:  (&anon_vma->rwsem){++++..}, at:  split_huge_page_to_list+0x402/0x18a0

I don't think the deadlock is triggerable without split_huge_page()
simplifilcation patchset.

But munlock_vma_page() here is wrong: we want to munlock the page
unconditionally, no need in rmap lookup, that munlock_vma_page() does.

Let's use clear_page_mlock() instead.  It can be called under ptl.

Fixes: e90309c9f7 ("thp: allow mlocked THP again")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Kirill A. Shutemov
fec89c109f thp: rewrite freeze_page()/unfreeze_page() with generic rmap walkers
freeze_page() and unfreeze_page() helpers evolved in rather complex
beasts.  It would be nice to cut complexity of this code.

This patch rewrites freeze_page() using standard try_to_unmap().
unfreeze_page() is rewritten with remove_migration_ptes().

The result is much simpler.

But the new variant is somewhat slower for PTE-mapped THPs.  Current
helpers iterates over VMAs the compound page is mapped to, and then over
ptes within this VMA.  New helpers iterates over small page, then over
VMA the small page mapped to, and only then find relevant pte.

We have short cut for PMD-mapped THP: we directly install migration
entries on PMD split.

I don't think the slowdown is critical, considering how much simpler
result is and that split_huge_page() is quite rare nowadays.  It only
happens due memory pressure or migration.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Kirill A. Shutemov
e388466de4 mm: make remove_migration_ptes() beyond mm/migration.c
Make remove_migration_ptes() available to be used in split_huge_page().

New parameter 'locked' added: as with try_to_umap() we need a way to
indicate that caller holds rmap lock.

We also shouldn't try to mlock() pte-mapped huge pages: pte-mapeed THP
pages are never mlocked.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Kirill A. Shutemov
2a52bcbcc6 rmap: extend try_to_unmap() to be usable by split_huge_page()
Add support for two ttu_flags:

  - TTU_SPLIT_HUGE_PMD would split PMD if it's there, before trying to
    unmap page;

  - TTU_RMAP_LOCKED indicates that caller holds relevant rmap lock;

Also, change rwc->done to !page_mapcount() instead of !page_mapped().
try_to_unmap() works on pte level, so we are really interested in the
mappedness of this small page rather than of the compound page it's a
part of.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Kirill A. Shutemov
b97731992d rmap: introduce rmap_walk_locked()
This patchset rewrites freeze_page() and unfreeze_page() using
try_to_unmap() and remove_migration_ptes().  Result is much simpler, but
somewhat slower.

Migration 8GiB worth of PMD-mapped THP:

  Baseline	20.21 +/- 0.393
  Patched	20.73 +/- 0.082
  Slowdown	1.03x

It's 3% slower, comparing to 14% in v1.  I don't it should be a stopper.

Splitting of PTE-mapped pages slowed more.  But this is not a common
case.

Migration 8GiB worth of PMD-mapped THP:

  Baseline	20.39 +/- 0.225
  Patched	22.43 +/- 0.496
  Slowdown	1.10x

rmap_walk_locked() is the same as rmap_walk(), but the caller takes care
of the relevant rmap lock.

This is preparation for switching THP splitting from custom rmap walk in
freeze_page()/unfreeze_page() to the generic one.

There is no support for KSM pages for now: not clear which lock is
implied.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Dan Williams
99490f16f8 mm: ZONE_DEVICE depends on SPARSEMEM_VMEMMAP
The primary use case for devm_memremap_pages() is to allocate an memmap
array from persistent memory.  That capabilty requires vmem_altmap which
requires SPARSEMEM_VMEMMAP.

Also, without SPARSEMEM_VMEMMAP the addition of ZONE_DEVICE expands
ZONES_WIDTH and triggers the:

"Unfortunate NUMA and NUMA Balancing config, growing page-frame for
last_cpupid."

...warning in mm/memory.c.  SPARSEMEM_VMEMMAP=n && ZONE_DEVICE=y is not
a configuration we should worry about supporting.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00