This patch set only includes a single change to
fix the compatible string for SATA controllers on
X-Gene v2 SOC platforms.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Wnq5
-----END PGP SIGNATURE-----
Merge tag 'xgene-dts-for-v4.7-part1' of https://github.com/AppliedMicro/xgene-next into next/dt64
Merge "First part of X-Gene DTS changes queued for v4.7" from Duc Dang:
This patch set only includes a single change to
fix the compatible string for SATA controllers on
X-Gene v2 SOC platforms.
* tag 'xgene-dts-for-v4.7-part1' of https://github.com/AppliedMicro/xgene-next:
arm64: dts: apm: Fix compatible string for X-Gene 2 SATA controller DTS node
- Reserve memory regions for Hi6220
- Add sp804 timer node for Hi6220
- Add cpu and cluster level's low power state for Hi6220
- Add gpio configuration nodes for Hi6220
- Add pinctrl configuration nodes for Hi6220
- Add spi related nodes for Hi6220
- Add i2c nodes for Hi6220
- Add i2c nodes to work with mezzanine boards
- Add usb nodes for Hi6220
- Add mailobx node for Hi6220
- Add SRAM node and stub clock node for Hi6220
- Add pinctrl nodes for uarts and enable them
- Add LED nodes for hi6220-hikey board
- Add hi655x pmic node for Hi6220
- Add dwmmc nodes for Hi6220
- Add wifi nodes support for Hi6220-Hikey board
- Register thermal sensor for Hi6220
- Register Hi6220's thermal zone for power allocator
- Add L2 cache topology for Hi6220
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MpZ0
-----END PGP SIGNATURE-----
Merge tag 'hi6220-dt-for-4.7' of git://github.com/hisilicon/linux-hisi into next/dt64
Pull "ARM64: DT: Hisilicon Hi6220 soc and hikey board updates for 4.7" from Wei Xu
- Reserve memory regions for Hi6220
- Add sp804 timer node for Hi6220
- Add cpu and cluster level's low power state for Hi6220
- Add gpio configuration nodes for Hi6220
- Add pinctrl configuration nodes for Hi6220
- Add spi related nodes for Hi6220
- Add i2c nodes for Hi6220
- Add i2c nodes to work with mezzanine boards
- Add usb nodes for Hi6220
- Add mailobx node for Hi6220
- Add SRAM node and stub clock node for Hi6220
- Add pinctrl nodes for uarts and enable them
- Add LED nodes for hi6220-hikey board
- Add hi655x pmic node for Hi6220
- Add dwmmc nodes for Hi6220
- Add wifi nodes support for Hi6220-Hikey board
- Register thermal sensor for Hi6220
- Register Hi6220's thermal zone for power allocator
- Add L2 cache topology for Hi6220
* tag 'hi6220-dt-for-4.7' of git://github.com/hisilicon/linux-hisi:
arm64: dts: Add L2 cache topology to Hi6220
arm64: dts: register Hi6220's thermal zone for power allocator
arm64: dts: register Hi6220's thermal sensor
arm64: dts: add wifi nodes support for hi6220-hikey
arm64: dts: add dwmmc nodes for hi6220
arm64: dts: hikey: Add hi655x pmic dts node
arm64: dts: add LED nodes for hi6220-hikey
arm64: dts: hi6220: add pinctrl for uarts and enable them
arm64: dts: add Hi6220's stub clock node
arm64: dts: add mailbox node for Hi6220
arm64: dts: Add hi6220 usb node
arm64: dts: hikey: enable i2c0 and i2c1 for working with mezzanine boards
arm64: dts: add all hi6220 i2c nodes
arm64: dts: add Hi6220 spi configuration nodes
arm64: dts: add Hi6220 pinctrl configuration nodes
arm64: dts: Add Hi6220 gpio configuration nodes
arm64: dts: enable idle states for Hi6220
arm64: dts: add sp804 timer node for Hi6220
arm64: dts: Reserve memory regions for hi6220
Just one update: Support for external expansion bus useful for
additional hardware e.g.LogicTile Express daughterboards (Brian Starkey)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ypy7
-----END PGP SIGNATURE-----
Merge tag 'juno-for-v4.7/dt-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt64
Pull "ARMv8 Juno DT updates for v4.7" from Sudeep Holla:
Just one update: Support for external expansion bus useful for
additional hardware e.g.LogicTile Express daughterboards (Brian Starkey)
* tag 'juno-for-v4.7/dt-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Add external expansion bus to DT
A couple of cleanups and fixes to various device trees, enable power and
volume keys on Jetson TX1, use stdout-path to define the serial port (so
it doesn't have to be specified on the kernel command-line) and add
Google Pixel C (a.k.a. Smaug) support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=2hlL
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.7-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64
Merge "arm64: tegra: Changes for v4.7-rc1" from Thierry Reding
A couple of cleanups and fixes to various device trees, enable power and
volume keys on Jetson TX1, use stdout-path to define the serial port (so
it doesn't have to be specified on the kernel command-line) and add
Google Pixel C (a.k.a. Smaug) support.
* tag 'tegra-for-4.7-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Enable cros-ec and charger on Smaug
arm64: tegra: Add pinmux for Smaug board
arm64: tegra: Add stdout-path for various boards
arm64: tegra: Remove unused #power-domain-cells property
arm64: tegra: Add gpio-keys nodes for Smaug
arm64: tegra: Enable power and volume keys on Jetson TX1
arm64: tegra: Add support for Google Pixel C
arm64: tegra: Replace legacy *,wakeup property with wakeup-source
arm64: tegra: Fix copy/paste typo in several DTS includes
arm64: tegra: Remove 0, prefix from unit-addresses
1. Add PL330 DMA controller and Thermal Management Unit to Exynos 7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=lzL+
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64
Merge "Samsung Device Tree ARM64 updates and improvements for v4.7" from Krzysztof Kozlowski:
1. Add PL330 DMA controller and Thermal Management Unit to Exynos 7.
* tag 'samsung-dt64-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: Add nodes for pdma0 and pdma1 for exynos7
arm64: dts: exynos: Add TMU node for exynos7
This patch adds the L2 cache topology on Hi6220. Hi6220 has two
clusters, every cluster has 512KiB L2 cache (32KiB x 16 ways).
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
With profiling Hi6220's power modeling so get dynamic coefficient and
sustainable power. So pass these parameters from DT.
Now enable power allocator with only one actor for CPU part, so directly
use cluster0's thermal sensor for monitoring temperature.
Reviewed-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add all three dwmmc nodes description for hi6220
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add the mfd hi655x dts node and regulator support on hi6220 platform.
Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Fei Wang <w.f@huawei.com>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add LED nodes for hi6220-hikey. There are total 6 LEDs on HiKey.
Four general purposed, one for WiFi activity, and one for Bluetooth
activity.
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable SRAM node and stub clock node for Hi6220, which uses mailbox
channel 1 for CPU's frequency change.
Furthermore, add the CPU clock phandle in CPU's node and using
operating-points-v2 to register operating points. So can be used by
cpufreq-dt driver.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch add device mailbox node for Hi6220 in DT.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
In HiKey board dts file, enable i2c0 and i2c1 for working with 96boards' LS
mezzanine.
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
use this I2C IP of Synopsys Designware for HiKey board.
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add Hi6220 spi configuration nodes. Disable by default in hi6220.dtsi
and enable it in board dts for usage of 96boards LS mezzanine board.
Signed-off-by: Zhong Kaihua <zhongkaihua@huawei.com>
Signed-off-by: Guodong Xu <guodong.xu@linaro.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add cpu and cluster level's low power state for Hi6220.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add sp804 timer for hi6220, so it can be used as broadcast timer.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
On Hi6220, below memory regions in DDR have specific purpose:
0x05e0,0000 - 0x05ef,ffff: For MCU firmware using at runtime;
0x06df,f000 - 0x06df,ffff: For mailbox message data;
0x0740,f000 - 0x0740,ffff: For MCU firmware's section;
0x3e00,0000 - 0x3fff,ffff: For OP-TEE.
This patch reserves these memory regions in DT.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add nodes for the ChromeOS Embedded Controller and for the gas gauge
connected to the I2C bus that it controls.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Juno development platform has an external expansion bus which can
be used for additional hardware (e.g. LogicTile Express daughterboards).
Add this bus to the Juno base device-tree.
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
nodes for the core rk3368 and some cleanups for gpio-keys,
mmc and tsadc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXDIe4AAoJEPOmecmc0R2B3acH/3U9VHCGVy7w5RNl/UISe6Eu
og7QZyy8r8dNw+bk9EX8x9AyqkN4bHAfAqg+Pc+JvxOeqmTjxFqPqZKWjEUQ8BOw
SPsJE0ZeRRYAvp1OYfR1ATGwRQDvJq+DaKtb9d8S6ZdYdwXWR/JhkXiCxpQGEqAO
TV82csxc86T+F+GJN63uk0UVfnZhzFtCJ6zSWBVyEpiUYxeQwTSkxjVUUJagOJLT
Wb/0qgD2b8L1Xs8Flj0zVwAsvNIBKlxsaXzhN9EBD9pnHDQJ1l2cU2EdsQtWCwlE
9ic2kwYFlgTrCAo1FITWFgyUTFLnuGcrfn2QIBIWK1X6TBJuYauGzslJEE96luw=
=zT4u
-----END PGP SIGNATURE-----
Merge tag 'v4.7-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
This contains the rk3368-geekbox as new board, mailbox device
nodes for the core rk3368 and some cleanups for gpio-keys,
mmc and tsadc.
* tag 'v4.7-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
Documentation: devicetree: rockchip: Document rk3368-GeekBox
arm64: dts: rockchip: Add rk3368 GeekBox dts
arm64: dts: rockchip: Clean up gpio-keys nodes
dt-bindings: Add vendor prefix for GeekBuying.com
arm64: dts: rockchip: Add rk3368 mailbox device nodes
arm64: dts: rockchip: remove broken-cd from emmc and sdio
arm64: dts: rockchip: fix the incorrect otp-out pin on rk3368
Signed-off-by: Olof Johansson <olof@lixom.net>
Add initial dtsi file to support lg1312 SoC which based on
Cortex-A53. Also add dts file to support lg1312 reference board
which based on lg1312 SoC.
Signed-off-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
* Use generic pinctrl properties in DT for salvator-x board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bcz4
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-cleanup-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64
Renesas ARM64 Based SoC Cleanup for v4.7
* Use generic pinctrl properties in DT for salvator-x board
* tag 'renesas-arm64-cleanup-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: salvator-x: use generic pinctrl properties
Signed-off-by: Olof Johansson <olof@lixom.net>
and Amlogic P200/P201 boards.
We also fix the memory nodes on the Vega S95 DTS.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hEv4
-----END PGP SIGNATURE-----
Merge tag 'gxbb-dt64' of https://github.com/carlocaione/linux-meson into next/dt64
Add support for a few more Amlogic S905/GXBB based boards: Hardkernel ODROID-C2
and Amlogic P200/P201 boards.
We also fix the memory nodes on the Vega S95 DTS.
* tag 'gxbb-dt64' of https://github.com/carlocaione/linux-meson:
ARM64: dts: amlogic: Add P200/P201 boards
ARM64: dts: amlogic: add Hardkernel ODROID-C2
Documentation: devicetree: amlogic: Document P20x and ODROID-C2 boards
ARM64: dts: amlogic: update serial aliases
ARM64: dts: amlogic: Clean up Vega S95 /memory nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch adds device tree nodes for pdma0 and pdma1 controllers
found on exynos7 SoCs.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
For Tegra boards, the device-tree alias serial0 is used for the console
and so add the stdout-path information so that the console no longer
needs to be passed via the kernel boot parameters.
For tegra132-norrin the alias serial0 is not defined and so add this.
This has been tested on tegra132-norrin and tegra210-p2371-0000.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Remove the "#power-domain-cells" property which was incorrectly
included by commit e53095857166 ("arm64: tegra: Add Tegra210
support").
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add gpio-keys nodes for the volumn controls, lid switch, tablet mode and
power button.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
[treding@nvidia.com: use symbolic names for input types and codes]
[treding@nvidia.com: use wakeup-source instead of gpio-key,wakeup]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a gpio-keys device tree node to represent the Power, Volume Up and
Volume Down keys found on Jetson TX1.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add initial device-tree support for Google Pixel C (a.k.a. Smaug) based
upon Tegra210 SoC with 3 GiB of LPDDR4 RAM.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Tested-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Though the keyboard and other driver will continue to support the legacy
"gpio-key,wakeup", "nvidia,wakeup-source" boolean property to enable the
wakeup source, "wakeup-source" is the new standard binding.
This patch replaces all the legacy wakeup properties with the unified
"wakeup-source" property in order to avoid any further copy-paste
duplication.
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The comment about the 8250 vs. APB DMA-enabled UART devices that was
added for Tegra20 and Tegra30 in commit b6551bb933 ("ARM: tegra: dts:
add aliases and DMA requestor for serial controller") introduced a typo
that has since spread to various other DTS include files. Fix all
occurrences of this typo.
Suggested-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When Tegra124 support was first merged the unit-addresses of all devices
were listed with a "0," prefix to encode the reg property's second cell.
It turns out that this notation is not correct, and the "," separator is
only used to separate fields in the unit address (such as the device and
function number in PCI devices), not individual cells for addresses with
more than one cell.
Signed-off-by: Thierry Reding <treding@nvidia.com>
others are usual stable material.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJXA8x6AAoJEL/70l94x66D0x8H/RcBnc75994RQ++WmHSvD9GF
yruGB8soLDdjX+Oceol0aEPHokrBu3JtcdoTBe0GwbCKV/F5NkQZ4EfLxDtR3tte
7ILkPULLy5GElFpJNQuT4pmXzTEspFvXpqHhFik7WVBga3W9wMFQcjbrgmGBUzLE
p2aJVhZyErpKxGFkUYWhDnlqWsguTTIzv/pqNhLY4VVc0UrXN9AA0fq9RkvgU3KS
Hxk4/A6SV/b7dyzvttzITww0f1iu8FmlLj2TXapIEoOz7AnInD6KIN0RYpxbDjxN
bEzEfpahUtuDeM87/t2kHEj0Gn09iHK7/BbCC1Hrwo1CQhbAQ/D0GIvqYAQixf4=
=NugZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Miscellaneous bugfixes.
The ARM and s390 fixes are for new regressions from the merge window,
others are usual stable material"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
compiler-gcc: disable -ftracer for __noclone functions
kvm: x86: make lapic hrtimer pinned
s390/mm/kvm: fix mis-merge in gmap handling
kvm: set page dirty only if page has been writable
KVM: x86: reduce default value of halt_poll_ns parameter
KVM: Hyper-V: do not do hypercall userspace exits if SynIC is disabled
KVM: x86: Inject pending interrupt even if pending nmi exist
arm64: KVM: Register CPU notifiers when the kernel runs at HYP
arm64: kvm: 4.6-rc1: Fix VTCR_EL2 VS setting
The GeekBox contains an MXM3 module with a Rockchip RK3368 SoC.
Some connectors are available directly on the module.
This adds initial support, namely serial, USB, GMAC, eMMC, IR and TSADC.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
When we detect support for 16bit VMID in ID_AA64MMFR1, we set the
VTCR_EL2_VS field to 1 to make use of 16bit vmids. But, with
commit 3a3604bc5e ("arm64: KVM: Switch to C-based stage2 init")
this is broken and we corrupt VTCR_EL2:T0SZ instead of updating the VS
field. VTCR_EL2_VS was actually defined to the field shift (19) and
not the real value for VS. This patch fixes the issue.
Fixes: commit 3a3604bc5e ("arm64: KVM: Switch to C-based stage2 init")
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Add minimal DT files for the Amlogic P20x development boards, based on
the Amlogic S905/GXBB SoC.
Cc: Andreas Färber <afaerber@suse.de>
Cc: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Add minimal DT files for the Hardkernel ODROID-C2 board based on the
Amlogic S905/GXBB SoC.
Used the other gxbb boards from Andreas Färber as a starting point.
Cc: Andreas Färber <afaerber@suse.de>
Cc: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Apparently, it's not valid to have an alias point to a disabled device.
Fix this by moving the aliases that are used (serial0) into the files
that use them, and remove aliases to disabled devices (serial1).
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Resolve the following warnings from new dtc by adding the unit address:
DTC arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
DTC arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
DTC arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Fixes: cc733bc906 ("ARM64: dts: amlogic: Add Tronsmart Vega S95 configs")
Signed-off-by: Andreas Färber <afaerber@suse.de>
Drop superfluous #address-cells and #size-cells.
Use KEY_POWER define for 116.
Rename sub-nodes to avoid new dtc warnings.
Reported-by: Julien Chauveau <chauveau.julien@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Julien Chauveau <chauveau.julien@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This adds mailbox device nodes in dts.
Mailbox is used by the Rockchip CPU cores to communicate
requests to MCU processor.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
