Commit Graph

355 Commits

Author SHA1 Message Date
Jaegeuk Kim
d7196c5a32 f2fs: relocate Kconfig from misc filesystems
The f2fs has been shipped on many smartphone devices during a couple of years.
So, it is worth to relocate Kconfig into main page from misc filesystems for
developers to choose it more easily.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-04-10 15:08:35 -07:00
Matthew Wilcox
d92576f116 dax: does not work correctly with virtual aliasing caches
The DAX code accesses the underlying storage through the kernel's linear
mapping, which may not be cache-coherent with user mappings on ARM, MIPS
or SPARC.  Temporarily disable the DAX code until this problem is
resolved.

The original XIP code also had this problem, but it was never noticed.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-16 17:56:04 -08:00
Matthew Wilcox
6cd176a51e vfs,ext2: remove CONFIG_EXT2_FS_XIP and rename CONFIG_FS_XIP to CONFIG_FS_DAX
The fewer Kconfig options we have the better.  Use the generic
CONFIG_FS_DAX to enable XIP support in ext2 as well as in the core.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-16 17:56:04 -08:00
Leif Lindholm
62c204ddfe fs: Make efivarfs a pseudo filesystem, built by default with EFI
efivars is currently enabled under MISC_FILESYSTEMS, which is decribed
as "such as filesystems that came from other operating systems".
In reality, it is a pseudo filesystem, providing access to the kernel
UEFI variable interface.

Since this is the preferred interface for accessing UEFI variables, over
the legacy efivars interface, also build it by default as a module if
CONFIG_EFI.

Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2015-01-05 14:15:58 +00:00
Miklos Szeredi
e9be9d5e76 overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree.  All modifications
go to the upper, writable layer.

This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.

The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems.  This
simplifies the implementation and allows native performance in these
cases.

The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS.  This uses slightly more memory than union mounts, but dentries
are relatively small.

Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.

Opening non directories results in the open forwarded to the
underlying filesystem.  This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).

Usage:

  mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay

The following cotributions have been folded into this patch:

Neil Brown <neilb@suse.de>:
 - minimal remount support
 - use correct seek function for directories
 - initialise is_real before use
 - rename ovl_fill_cache to ovl_dir_read

Felix Fietkau <nbd@openwrt.org>:
 - fix a deadlock in ovl_dir_read_merged
 - fix a deadlock in ovl_remove_whiteouts

Erez Zadok <ezk@fsl.cs.sunysb.edu>
 - fix cleanup after WARN_ON

Sedat Dilek <sedat.dilek@googlemail.com>
 - fix up permission to confirm to new API

Robin Dong <hao.bigrat@gmail.com>
 - fix possible leak in ovl_new_inode
 - create new inode in ovl_link

Andy Whitcroft <apw@canonical.com>
 - switch to __inode_permission()
 - copy up i_uid/i_gid from the underlying inode

AV:
 - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
 - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
   lack of check for udir being the parent of upper, dropping and regaining
   the lock on udir (which would require _another_ check for parent being
   right).
 - bogus d_drop() in copyup and rename [fix from your mail]
 - copyup/remove and copyup/rename races [fix from your mail]
 - ovl_dir_fsync() leaving ERR_PTR() in ->realfile
 - ovl_entry_free() is pointless - it's just a kfree_rcu()
 - fold ovl_do_lookup() into ovl_lookup()
 - manually assigning ->d_op is wrong.  Just use ->s_d_op.
 [patches picked from Miklos]:
 * copyup/remove and copyup/rename races
 * bogus d_drop() in copyup and rename

Also thanks to the following people for testing and reporting bugs:

  Jordi Pujol <jordipujolp@gmail.com>
  Andy Whitcroft <apw@canonical.com>
  Michal Suchanek <hramrach@centrum.cz>
  Felix Fietkau <nbd@openwrt.org>
  Erez Zadok <ezk@fsl.cs.sunysb.edu>
  Randy Dunlap <rdunlap@xenotime.net>

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 00:14:38 +02:00
Jeff Layton
f779002965 lockd: move lockd's grace period handling into its own module
Currently, all of the grace period handling is part of lockd. Eventually
though we'd like to be able to build v4-only servers, at which point
we'll need to put all of this elsewhere.

Move the code itself into fs/nfs_common and have it build a grace.ko
module. Then, rejigger the Kconfig options so that both nfsd and lockd
enable it automatically.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
2014-09-17 16:33:11 -04:00
Tejun Heo
ba341d55a4 kernfs: add CONFIG_KERNFS
As sysfs was kernfs's only user, kernfs has been piggybacking on
CONFIG_SYSFS; however, kernfs is scheduled to grow a new user very
soon.  Introduce a separate config option CONFIG_KERNFS which is to be
selected by kernfs users.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-07 16:08:57 -08:00
Christoph Hellwig
feda821e76 fs: remove generic_acl
And instead convert tmpfs to use the new generic ACL code, with two stub
methods provided for in-memory filesystems.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-01-26 08:26:40 -05:00
Matt Fleming
d68772b7c8 efivarfs: Move to fs/efivarfs
Now that efivarfs uses the efivar API, move it out of efivars.c and
into fs/efivarfs where it belongs. This move will eventually allow us
to enable the efivarfs code without having to also enable
CONFIG_EFI_VARS built, and vice versa.

Furthermore, things like,

    mount -t efivarfs none /sys/firmware/efi/efivars

will now work if efivarfs is built as a module without requiring the
use of MODULE_ALIAS(), which would have been necessary when the
efivarfs code was part of efivars.c.

Cc: Matthew Garrett <matthew.garrett@nebula.com>
Cc: Jeremy Kerr <jk@ozlabs.org>
Reviewed-by: Tom Gundersen <teg@jklm.no>
Tested-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-04-17 13:25:09 +01:00
Robert P. J. Day
807185eb3e fuse: Move CUSE Kconfig entry from fs/Kconfig into fs/fuse/Kconfig
Given that CUSE depends on FUSE, it only makes sense to move its
Kconfig entry into the FUSE Kconfig file.  Also, add a few grammatical
and semantic touchups.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-01-17 13:08:45 +01:00
Linus Torvalds
a13eea6bd9 Introduce a new file system, Flash-Friendly File System (F2FS), to Linux 3.8.
Highlights:
 - Add initial f2fs source codes
 - Fix an endian conversion bug
 - Fix build failures on random configs
 - Fix the power-off-recovery routine
 - Minor cleanup, coding style, and typos patches
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQxuJcAAoJEEAUqH6CSFDSq80QAI3i7NgUkx4h225MnbJdEKRb
 YX1MfSPmgE0q/15XS2qQu/s9NGJmXLV1IR9EtRSBlCQjwWhbx9Q9URktGkWslFnx
 6mBLy8EvVKDMVdwoUS8ZY6IjfKbmSnoIHTZrGaT9+9d7k8nlOQLaj3qQF4wBuw1+
 +qhJQV642v8qw7JiVVFgxcBSLpAS9cbdOA0vxfWncMwmRLaEO45W5+rob8ZN8WaS
 BUiYIiue8vlB0VDIYfpl/sSPJC/Bn1XsLKZoS2WJl8CKioE1ptLjT3acUBbabUxp
 hNLl8Ae0PylDMFpH8hrBXhleznrVqEMOTos/Z80/UyBny2sCxJFnaQ60TayUo2l2
 hYk5Wbyj8K7IBJEke23Fepild2PnGz22zf2v+tLxxVgPH5j7/l2XHfy9gPvDbd1P
 4ENiJUC3LE49Mi4TvEIFqhbrcJfD9C+v3bxpWGe8CevrpYZaB8tv/6nQXJCC/Ixp
 tMWqLKlHyXGmk5DZpiSFaj0/GbTPT0UGqZVRzzSXQpKqxJU6eTnXDa6aLUEYH8fH
 grOCriaJrd8SgL3l7RokQSQEyRHuNjMm1tlUQWOObE+y0nJjWb9Amwn1yUtJuNzx
 Np4nnlMhxwJ48P3LeeheSCuOUbxJtOzOR8MVXm7deYiGQbYaqB1/+9TbjOZBSX4O
 fpbCXrmqe1pUBukftZsL
 =iMoX
 -----END PGP SIGNATURE-----

Merge tag 'for-3.8-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

Pull new F2FS filesystem from Jaegeuk Kim:
 "Introduce a new file system, Flash-Friendly File System (F2FS), to
  Linux 3.8.

  Highlights:
   - Add initial f2fs source codes
   - Fix an endian conversion bug
   - Fix build failures on random configs
   - Fix the power-off-recovery routine
   - Minor cleanup, coding style, and typos patches"

From the Kconfig help text:

  F2FS is based on Log-structured File System (LFS), which supports
  versatile "flash-friendly" features. The design has been focused on
  addressing the fundamental issues in LFS, which are snowball effect
  of wandering tree and high cleaning overhead.

  Since flash-based storages show different characteristics according to
  the internal geometry or flash memory management schemes aka FTL, F2FS
  and tools support various parameters not only for configuring on-disk
  layout, but also for selecting allocation and cleaning algorithms.

and there's an article by Neil Brown about it on lwn.net:

  http://lwn.net/Articles/518988/

* tag 'for-3.8-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (36 commits)
  f2fs: fix tracking parent inode number
  f2fs: cleanup the f2fs_bio_alloc routine
  f2fs: introduce accessor to retrieve number of dentry slots
  f2fs: remove redundant call to f2fs_put_page in delete entry
  f2fs: make use of GFP_F2FS_ZERO for setting gfp_mask
  f2fs: rewrite f2fs_bio_alloc to make it simpler
  f2fs: fix a typo in f2fs documentation
  f2fs: remove unused variable
  f2fs: move error condition for mkdir at proper place
  f2fs: remove unneeded initialization
  f2fs: check read only condition before beginning write out
  f2fs: remove unneeded memset from init_once
  f2fs: show error in case of invalid mount arguments
  f2fs: fix the compiler warning for uninitialized use of variable
  f2fs: resolve build failures
  f2fs: adjust kernel coding style
  f2fs: fix endian conversion bugs reported by sparse
  f2fs: remove unneeded version.h header file from f2fs.h
  f2fs: update the f2fs document
  f2fs: update Kconfig and Makefile
  ...
2012-12-20 13:54:52 -08:00
Jaegeuk Kim
a14d53937c f2fs: update Kconfig and Makefile
This adds Makefile and Kconfig for f2fs, and updates Makefile and Kconfig files
in the fs directory.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-11 13:43:42 +09:00
Tao Ma
939da10844 ext4: Remove CONFIG_EXT4_FS_XATTR
Ted has sent out a RFC about removing this feature. Eric and Jan
confirmed that both RedHat and SUSE enable this feature in all their
product.  David also said that "As far as I know, it's enabled in all
Android kernels that use ext4."  So it seems OK for us.

And what's more, as inline data depends its implementation on xattr,
and to be frank, I don't run any test again inline data enabled while
xattr disabled.  So I think we should add inline data and remove this
config option in the same release.

[ The savings if you disable CONFIG_EXT4_FS_XATTR is only 27k, which
  isn't much in the grand scheme of things.  Since no one seems to be
  testing this configuration except for some automated compile farms, on
  balance we are better removing this config option, and so that it is
  effectively always enabled. -- tytso ]

Cc: David Brown <davidb@codeaurora.org>
Cc: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 16:30:43 -05:00
Linus Torvalds
e2a0883e40 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile 1 from Al Viro:
 "This is _not_ all; in particular, Miklos' and Jan's stuff is not there
  yet."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (64 commits)
  ext4: initialization of ext4_li_mtx needs to be done earlier
  debugfs-related mode_t whack-a-mole
  hfsplus: add an ioctl to bless files
  hfsplus: change finder_info to u32
  hfsplus: initialise userflags
  qnx4: new helper - try_extent()
  qnx4: get rid of qnx4_bread/qnx4_getblk
  take removal of PF_FORKNOEXEC to flush_old_exec()
  trim includes in inode.c
  um: uml_dup_mmap() relies on ->mmap_sem being held, but activate_mm() doesn't hold it
  um: embed ->stub_pages[] into mmu_context
  gadgetfs: list_for_each_safe() misuse
  ocfs2: fix leaks on failure exits in module_init
  ecryptfs: make register_filesystem() the last potential failure exit
  ntfs: forgets to unregister sysctls on register_filesystem() failure
  logfs: missing cleanup on register_filesystem() failure
  jfs: mising cleanup on register_filesystem() failure
  make configfs_pin_fs() return root dentry on success
  configfs: configfs_create_dir() has parent dentry in dentry->d_parent
  configfs: sanitize configfs_create()
  ...
2012-03-21 13:36:41 -07:00
Kai Bankett
5d026c7242 fs: initial qnx6fs addition
Adds support for qnx6fs readonly support to the linux kernel.

* Mount option
  The option mmi_fs can be used to mount Harman Becker/Audi MMI 3G
  HDD qnx6fs filesystems.

* Documentation
  A high level filesystem stucture description can be found in the
  Documentation/filesystems directory. (qnx6.txt)

* Additional features
  - Active (stable) superblock selection
  - Superblock checksum check (enforced)
  - Supports mount of qnx6 filesystems with to host different endianess
  - Automatic endianess detection
  - Longfilename support (with non-enfocing crc check)
  - All blocksizes (512, 1024, 2048 and 4096 supported)

Signed-off-by: Kai Bankett <chaosman@ontika.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-20 21:29:38 -04:00
Linus Torvalds
bfcfaa77bd vfs: use 'unsigned long' accesses for dcache name comparison and hashing
Ok, this is hacky, and only works on little-endian machines with goo
unaligned handling.  And even then only with CONFIG_DEBUG_PAGEALLOC
disabled, since it can access up to 7 bytes after the pathname.

But it runs like a bat out of hell.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-08 18:08:44 -08:00
Linus Torvalds
9e203936ea Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd
* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  ore: Must support none-PAGE-aligned IO
  ore: fix BUG_ON, too few sgs when reading
  ore: Fix crash in case of an IO error.
  ore: FIX breakage when MISC_FILESYSTEMS is not set
2012-01-09 12:51:01 -08:00
Boaz Harrosh
831c2dc5f4 ore: FIX breakage when MISC_FILESYSTEMS is not set
As Reported by Randy Dunlap

When MISC_FILESYSTEMS is not enabled and NFS4.1 is:

fs/built-in.o: In function `objio_alloc_io_state':
objio_osd.c:(.text+0xcb525): undefined reference to `ore_get_rw_state'
fs/built-in.o: In function `_write_done':
objio_osd.c:(.text+0xcb58d): undefined reference to `ore_check_io'
fs/built-in.o: In function `_read_done':
...

When MISC_FILESYSTEMS, which is more of a GUI thing then anything else,
is not selected. exofs/Kconfig is never examined during Kconfig,
and it can not do it's magic stuff to automatically select everything
needed.

We must split exofs/Kconfig in two. The ore one is always included.
And the exofs one is left in it's old place in the menu.

[Needed for the 3.2.0 Kernel]
CC: Stable Tree <stable@kernel.org>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-01-06 16:48:14 +02:00
Al Viro
9be96f3fd1 move fs/partitions to block/
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:06 -05:00
Robert P. J. Day
f5fc870da2 tmpfs: add "tmpfs" to the Kconfig prompt to make it obvious.
Add the leading word "tmpfs" to the Kconfig string to make it blindingly
obvious that this selection refers to tmpfs.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:45 -07:00
Robert P. J. Day
206506ccf0 tmpfs: expand "help" to explain value of TMPFS_POSIX_ACL
Expand the fs/Kconfig "help" info to clarify why it's a bad idea to
deselect the TMPFS_POSIX_ACL config variable.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-03 14:25:25 -10:00
Linus Torvalds
32e51f141f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (25 commits)
  cifs: remove unnecessary dentry_unhash on rmdir/rename_dir
  ocfs2: remove unnecessary dentry_unhash on rmdir/rename_dir
  exofs: remove unnecessary dentry_unhash on rmdir/rename_dir
  nfs: remove unnecessary dentry_unhash on rmdir/rename_dir
  ext2: remove unnecessary dentry_unhash on rmdir/rename_dir
  ext3: remove unnecessary dentry_unhash on rmdir/rename_dir
  ext4: remove unnecessary dentry_unhash on rmdir/rename_dir
  btrfs: remove unnecessary dentry_unhash in rmdir/rename_dir
  ceph: remove unnecessary dentry_unhash calls
  vfs: clean up vfs_rename_other
  vfs: clean up vfs_rename_dir
  vfs: clean up vfs_rmdir
  vfs: fix vfs_rename_dir for FS_RENAME_DOES_D_MOVE filesystems
  libfs: drop unneeded dentry_unhash
  vfs: update dentry_unhash() comment
  vfs: push dentry_unhash on rename_dir into file systems
  vfs: push dentry_unhash on rmdir into file systems
  vfs: remove dget() from dentry_unhash()
  vfs: dentry_unhash immediately prior to rmdir
  vfs: Block mmapped writes while the fs is frozen
  ...
2011-05-26 09:52:14 -07:00
Jonas Gorski
79fead47c5 exportfs: reallow building as a module
Commit 990d6c2d7a ("vfs: Add name to file
handle conversion support") changed EXPORTFS to be a bool.
This was needed for earlier revisions of the original patch, but the actual
commit put the code needing it into its own file that only gets compiled
when FHANDLE is selected which in turn selects EXPORTFS.
So EXPORTFS can be safely compiled as a module when not selecting FHANDLE.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-05-26 07:26:43 -04:00
Eric Paris
4db70f73e5 tmpfs: fix XATTR N overriding POSIX_ACL Y
Choosing TMPFS_XATTR default N was switching off TMPFS_POSIX_ACL,
even if it had been Y in oldconfig; and Linus reports that PulseAudio
goes subtly wrong unless it can use ACLs on /dev/shm.

Make TMPFS_POSIX_ACL select TMPFS_XATTR (and depend upon TMPFS),
and move the TMPFS_POSIX_ACL entry before the TMPFS_XATTR entry,
to avoid asking unnecessary questions then ignoring their answers.

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 19:53:02 -07:00
Eric Paris
b09e0fa4b4 tmpfs: implement generic xattr support
Implement generic xattrs for tmpfs filesystems.  The Feodra project, while
trying to replace suid apps with file capabilities, realized that tmpfs,
which is used on the build systems, does not support file capabilities and
thus cannot be used to build packages which use file capabilities.  Xattrs
are also needed for overlayfs.

The xattr interface is a bit odd.  If a filesystem does not implement any
{get,set,list}xattr functions the VFS will call into some random LSM hooks
and the running LSM can then implement some method for handling xattrs.
SELinux for example provides a method to support security.selinux but no
other security.* xattrs.

As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have
xattr handler routines specifically to handle acls.  Because of this tmpfs
would loose the VFS/LSM helpers to support the running LSM.  To make up
for that tmpfs had stub functions that did nothing but call into the LSM
hooks which implement the helpers.

This new patch does not use the LSM fallback functions and instead just
implements a native get/set/list xattr feature for the full security.* and
trusted.* namespace like a normal filesystem.  This means that tmpfs can
now support both security.selinux and security.capability, which was not
previously possible.

The basic implementation is that I attach a:

struct shmem_xattr {
	struct list_head list; /* anchored by shmem_inode_info->xattr_list */
	char *name;
	size_t size;
	char value[0];
};

Into the struct shmem_inode_info for each xattr that is set.  This
implementation could easily support the user.* namespace as well, except
some care needs to be taken to prevent large amounts of unswappable memory
being allocated for unprivileged users.

[mszeredi@suse.cz: new config option, suport trusted.*, support symlinks]
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Hugh Dickins <hughd@google.com>
Tested-by: Jordi Pujol <jordipujolp@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:31 -07:00
Linus Torvalds
242e5d06be Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] tioca: Fix assignment from incompatible pointer warnings
  [IA64] mca.c: Fix cast from integer to pointer warning
  [IA64] setup.c Typo fix "Architechtuallly"
  [IA64] Add CONFIG_MISC_DEVICES=y to configs that need it.
  [IA64] disable interrupts at end of ia64_mca_cpe_int_handler()
  [IA64] Add DMA_ERROR_CODE define.
  pstore: fix build warning for unused return value from sysfs_create_file
  pstore: X86 platform interface using ACPI/APEI/ERST
  pstore: new filesystem interface to platform persistent storage
2011-03-16 19:01:29 -07:00
Tony Luck
afe997a183 Pull pstorev4 into release branch 2011-03-16 09:58:31 -07:00
Aneesh Kumar K.V
990d6c2d7a vfs: Add name to file handle conversion support
The syscall also return mount id which can be used
to lookup file system specific information such as uuid
in /proc/<pid>/mountinfo

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-15 02:21:37 -04:00
David Rientjes
6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Randy Dunlap
16ebe911eb fs: FS_POSIX_ACL does not depend on BLOCK
- Fix a kconfig unmet dependency warning.
- Remove the comment that identifies which filesystems use POSIX ACL
  utility routines.
- Move the FS_POSIX_ACL symbol outside of the BLOCK symbol if/endif block
  because its functions do not depend on BLOCK and some of the filesystems
  that use it do not depend on BLOCK.

warning: (GENERIC_ACL && JFFS2_FS_POSIX_ACL && NFSD_V4 && NFS_ACL_SUPPORT && 9P_FS_POSIX_ACL) selects FS_POSIX_ACL which has unmet direct dependencies (BLOCK)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-17 03:30:37 -05:00
Tony Luck
ca01d6dd2d pstore: new filesystem interface to platform persistent storage
Some platforms have a small amount of non-volatile storage that
can be used to store information useful to diagnose the cause of
a system crash.  This is the generic part of a file system interface
that presents information from the crash as a series of files in
/dev/pstore.  Once the information has been seen, the underlying
storage is freed by deleting the files.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-12-28 14:25:21 -08:00
Greg Kroah-Hartman
e4c5bf8e3d Merge 'staging-next' to Linus's tree
This merges the staging-next tree to Linus's tree and resolves
some conflicts that were present due to changes in other trees that were
affected by files here.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-28 09:44:56 -07:00
Linus Torvalds
7420a8c0de Merge branch 'flock' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'flock' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  locks: turn lock_flocks into a spinlock
  fasync: re-organize fasync entry insertion to allow it under a spinlock
  locks/nfsd: allocate file lock outside of spinlock
  lockd: fix nlmsvc_notify_blocked locking
  lockd: push lock_flocks down
2010-10-27 18:13:34 -07:00
Arnd Bergmann
72f98e7255 locks: turn lock_flocks into a spinlock
Nothing depends on lock_flocks using the BKL
any more, so we can do the switch over to
a private spinlock.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-27 22:07:36 +02:00
Randy Dunlap
4199ca77cc fs: move exportfs since it is not a networking filesystem
Move the EXPORTFS kconfig symbol out of the NETWORK_FILESYSTEMS block
since it provides a library function that can be (and is) used by other
(non-network) filesystems.

This also eliminates a kconfig dependency warning:

warning: (XFS_FS && BLOCK || NFSD && NETWORK_FILESYSTEMS && INET && FILE_LOCKING && BKL) selects EXPORTFS which has unmet direct dependencies (NETWORK_FILESYSTEMS)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:13 -07:00
Arnd Bergmann
6de5bd128d BKL: introduce CONFIG_BKL.
With all the patches we have queued in the BKL removal tree, only a
few dozen modules are left that actually rely on the BKL, and even
there are lots of low-hanging fruit. We need to decide what to do
about them, this patch illustrates one of the options:

Every user of the BKL is marked as 'depends on BKL' in Kconfig,
and the CONFIG_BKL becomes a user-visible option. If it gets
disabled, no BKL using module can be built any more and the BKL
code itself is compiled out.

The one exception is file locking, which is practically always
enabled and does a 'select BKL' instead. This effectively forces
CONFIG_BKL to be enabled until we have solved the fs/lockd
mess and can apply the patch that removes the BKL from fs/locks.c.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-21 15:44:13 +02:00
Arnd Bergmann
2116b7a473 smbfs: move to drivers/staging
smbfs has been scheduled for removal in 2.6.27, so
maybe we can now move it to drivers/staging on the
way out.

smbfs still uses the big kernel lock and nobody
is going to fix that, so we should be getting
rid of it soon.

This removes the 32 bit compat mount and ioctl
handling code, which is implemented in common fs
code, and moves all smbfs related files into
drivers/staging/smbfs.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05 09:08:21 -07:00
Arnd Bergmann
db7bee24d2 autofs3: move to drivers/staging
Nobody appears to be interested in fixing autofs3 bugs
any more and it uses the BKL, which is going away.

Move this to staging for retirement. Unless someone
complains until 2.6.38, we can remove it for good.

The include/linux/auto_fs.h header file is still used
by autofs4, so it remains in place.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ian Kent <raven@themaw.net>
Cc: autofs@linux.kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05 09:03:39 -07:00
Stephen Boyd
59b4856831 fs/Kconfig: Fix typo Userpace -> Userspace
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-20 17:30:22 +02:00
Linus Torvalds
fc7f99cf36 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (205 commits)
  ceph: update for write_inode API change
  ceph: reset osd after relevant messages timed out
  ceph: fix flush_dirty_caps race with caps migration
  ceph: include migrating caps in issued set
  ceph: fix osdmap decoding when pools include (removed) snaps
  ceph: return EBADF if waiting for caps on closed file
  ceph: set osd request message front length correctly
  ceph: reset front len on return to msgpool; BUG on mismatched front iov
  ceph: fix snaptrace decoding on cap migration between mds
  ceph: use single osd op reply msg
  ceph: reset bits on connection close
  ceph: remove bogus mds forward warning
  ceph: remove fragile __map_osds optimization
  ceph: fix connection fault STANDBY check
  ceph: invalidate_authorizer without con->mutex held
  ceph: don't clobber write return value when using O_SYNC
  ceph: fix client_request_forward decoding
  ceph: drop messages on unregistered mds sessions; cleanup
  ceph: fix comments, locking in destroy_inode
  ceph: move dereference after NULL test
  ...

Fix trivial conflicts in Documentation/ioctl/ioctl-number.txt
2010-03-19 09:43:06 -07:00
Joern Engel
5db53f3e80 [LogFS] add new flash file system
This is a new flash file system. See
Documentation/filesystems/logfs.txt

Signed-off-by: Joern Engel <joern@logfs.org>
2009-11-20 20:13:39 +01:00
Benjamin Herrenschmidt
5a1eb5c445 powerpc: Cleanup Kconfig selection of hugetlbfs support
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-30 15:03:54 +11:00
Linus Torvalds
0d43f5123d Merge branch 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Fix hugetlbfs dependencies for SH-3 && MMU configurations.
  sh: Document uImage.bin target in archhelp.
  sh: add uImage.bin target
  sh: rsk7203 CONFIG_MTD=n fix
  sh: Check for return_to_handler when unwinding the stack
  sh: Build fix: define more __movmem* symbols
  sh: __irq_entry annotate do_IRQ().

Fix up sh/powerpc conflicts in fs/Kconfig
2009-10-29 09:07:15 -07:00
Kumar Gala
0cd9ad73b8 powerpc: Limit hugetlbfs support to PPC64 Book-3S machines
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-27 16:42:41 +11:00
Paul Mundt
ffb4a73d89 sh: Fix hugetlbfs dependencies for SH-3 && MMU configurations.
The hugetlb dependencies presently depend on SUPERH && MMU while the
hugetlb page size definitions depend on CPU_SH4 or CPU_SH5. This
unfortunately allows SH-3 + MMU configurations to enable hugetlbfs
without a corresponding HPAGE_SHIFT definition, resulting in the build
blowing up.

As SH-3 doesn't support variable page sizes, we tighten up the
dependenies a bit to prevent hugetlbfs from being enabled. These days
we also have a shiny new SYS_SUPPORTS_HUGETLBFS, so switch to using
that rather than adding to the list of corner cases in fs/Kconfig.

Reported-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27 07:22:37 +09:00
Sage Weil
9030aaf9bf ceph: Kconfig, Makefile
Kconfig options and Makefile.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:15 -07:00
Hugh Dickins
3f96b79ad9 tmpfs: depend on shmem
CONFIG_SHMEM off gives you (ramfs masquerading as) tmpfs, even when
CONFIG_TMPFS is off: that's a little anomalous, and I'd intended to make
more sense of it by removing CONFIG_TMPFS altogether, always enabling its
code when CONFIG_SHMEM; but so many defconfigs have CONFIG_SHMEM on
CONFIG_TMPFS off that we'd better leave that as is.

But there is no point in asking for CONFIG_TMPFS if CONFIG_SHMEM is off:
make TMPFS depend on SHMEM, which also prevents TMPFS_POSIX_ACL
shmem_acl.o being pointlessly built into the kernel when SHMEM is off.

And a selfish change, to prevent the world from being rebuilt when I
switch between CONFIG_SHMEM on and off: the only CONFIG_SHMEM in the
header files is mm.h shmem_lock() - give that a shmem.c stub instead.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:41 -07:00
Ryusuke Konishi
41f4db0f48 fs/Kconfig: move nilfs2 outside misc filesystems
Some people asked me questions like the following:

On Wed, 15 Jul 2009 13:11:21 +0200, Leon Woestenberg wrote:
> just wondering, any reasons why NILFS2 is one of the miscellaneous
> filesystems and, for example, btrfs, is not in Kconfig?

Actually, nilfs is NOT a filesystem came from other operating systems,
but a filesystem created purely for Linux.  Nor is it a flash
filesystem but that for generic block devices.

So, this moves nilfs outside the misc category as I responded in LKML
"Re: Why does NILFS2 hide under Miscellaneous filesystems?"
(Message-Id: <20090716.002526.93465395.ryusuke@osrg.net>).

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:16 +09:00
Ryusuke Konishi
4fed598a49 fs/Kconfig: move nilfs2 out
fs/Kconfig file was split into individual fs/*/Kconfig files before
nilfs was merged.  I've found the current config entry of nilfs is
tainting the work.  Sorry, I didn't notice.  This fixes the violation.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
2009-07-14 12:34:17 +09:00
Linus Torvalds
7e0338c0de Merge branch 'for-2.6.31' of git://fieldses.org/git/linux-nfsd
* 'for-2.6.31' of git://fieldses.org/git/linux-nfsd: (60 commits)
  SUNRPC: Fix the TCP server's send buffer accounting
  nfsd41: Backchannel: minorversion support for the back channel
  nfsd41: Backchannel: cleanup nfs4.0 callback encode routines
  nfsd41: Remove ip address collision detection case
  nfsd: optimise the starting of zero threads when none are running.
  nfsd: don't take nfsd_mutex twice when setting number of threads.
  nfsd41: sanity check client drc maxreqs
  nfsd41: move channel attributes from nfsd4_session to a nfsd4_channel_attr struct
  NFS: kill off complicated macro 'PROC'
  sunrpc: potential memory leak in function rdma_read_xdr
  nfsd: minor nfsd_vfs_write cleanup
  nfsd: Pull write-gathering code out of nfsd_vfs_write
  nfsd: track last inode only in use_wgather case
  sunrpc: align cache_clean work's timer
  nfsd: Use write gathering only with NFSv2
  NFSv4: kill off complicated macro 'PROC'
  NFSv4: do exact check about attribute specified
  knfsd: remove unreported filehandle stats counters
  knfsd: fix reply cache memory corruption
  knfsd: reply cache cleanups
  ...
2009-06-22 12:55:50 -07:00
David Daney
852969b2d2 Hugetlbfs: Enable hugetlbfs for more systems in Kconfig.
As part of adding hugetlbfs support for MIPS, I am adding a new
kconfig variable 'SYS_SUPPORTS_HUGETLBFS'.  Since some mips cpu
varients don't yet support it, we can enable selection of HUGETLBFS on
a system by system basis from the arch/mips/Kconfig.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
CC: William Irwin <wli@holomorphy.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17 11:06:31 +01:00
Tomas Szepe
69050eee8e CONFIG_FILE_LOCKING should not depend on CONFIG_BLOCK
CONFIG_FILE_LOCKING should not depend on CONFIG_BLOCK.

This makes it possible to run complete systems out of a CONFIG_BLOCK=n
initramfs on current kernels again (this last worked on 2.6.27.*).

Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:52 -07:00
Tejun Heo
151060ac13 CUSE: implement CUSE - Character device in Userspace
CUSE enables implementing character devices in userspace.  With recent
additions of ioctl and poll support, FUSE already has most of what's
necessary to implement character devices.  All CUSE has to do is
bonding all those components - FUSE, chardev and the driver model -
nicely.

When client opens /dev/cuse, kernel starts conversation with
CUSE_INIT.  The client tells CUSE which device it wants to create.  As
the previous patch made fuse_file usable without associated
fuse_inode, CUSE doesn't create super block or inodes.  It attaches
fuse_file to cdev file->private_data during open and set ff->fi to
NULL.  The rest of the operation is almost identical to FUSE direct IO
case.

Each CUSE device has a corresponding directory /sys/class/cuse/DEVNAME
(which is symlink to /sys/devices/virtual/class/DEVNAME if
SYSFS_DEPRECATED is turned off) which hosts "waiting" and "abort"
among other things.  Those two files have the same meaning as the FUSE
control files.

The only notable lacking feature compared to in-kernel implementation
is mmap support.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-06-09 11:24:11 +02:00
Randy Dunlap
dd4dc82d4c lockd: fix FILE_LOCKING=n build error
lockd/svclock.c is missing a header file <linux/fs.h>.

<linux/fs.h> is missing a definition of locks_release_private()
for the config case of FILE_LOCKING=n, causing a build error:

fs/lockd/svclock.c:330: error: implicit declaration of function 'locks_release_private'

lockd without FILE_LOCKING doesn't make sense, so make LOCKD and LOCKD_V4
depend on FILE_LOCKING, and make NFS depend on FILE_LOCKING.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-05-13 15:59:10 -04:00
Ryusuke Konishi
0c4fb87764 nilfs2: update makefile and Kconfig
This adds a Makefile for the nilfs2 file system, and updates the
makefile and Kconfig file in the file system directory.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:16 -07:00
Linus Torvalds
3cc50ac0db Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-fscache
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-fscache: (41 commits)
  NFS: Add mount options to enable local caching on NFS
  NFS: Display local caching state
  NFS: Store pages from an NFS inode into a local cache
  NFS: Read pages from FS-Cache into an NFS inode
  NFS: nfs_readpage_async() needs to be accessible as a fallback for local caching
  NFS: Add read context retention for FS-Cache to call back with
  NFS: FS-Cache page management
  NFS: Add some new I/O counters for FS-Cache doing things for NFS
  NFS: Invalidate FsCache page flags when cache removed
  NFS: Use local disk inode cache
  NFS: Define and create inode-level cache objects
  NFS: Define and create superblock-level objects
  NFS: Define and create server-level objects
  NFS: Register NFS for caching and retrieve the top-level index
  NFS: Permit local filesystem caching to be enabled for NFS
  NFS: Add FS-Cache option bit and debug bit
  NFS: Add comment banners to some NFS functions
  FS-Cache: Make kAFS use FS-Cache
  CacheFiles: A cache that backs onto a mounted filesystem
  CacheFiles: Export things for CacheFiles
  ...
2009-04-03 10:07:43 -07:00
David Howells
9ae326a690 CacheFiles: A cache that backs onto a mounted filesystem
Add an FS-Cache cache-backend that permits a mounted filesystem to be used as a
backing store for the cache.

CacheFiles uses a userspace daemon to do some of the cache management - such as
reaping stale nodes and culling.  This is called cachefilesd and lives in
/sbin.  The source for the daemon can be downloaded from:

	http://people.redhat.com/~dhowells/cachefs/cachefilesd.c

And an example configuration from:

	http://people.redhat.com/~dhowells/cachefs/cachefilesd.conf

The filesystem and data integrity of the cache are only as good as those of the
filesystem providing the backing services.  Note that CacheFiles does not
attempt to journal anything since the journalling interfaces of the various
filesystems are very specific in nature.

CacheFiles creates a misc character device - "/dev/cachefiles" - that is used
to communication with the daemon.  Only one thing may have this open at once,
and whilst it is open, a cache is at least partially in existence.  The daemon
opens this and sends commands down it to control the cache.

CacheFiles is currently limited to a single cache.

CacheFiles attempts to maintain at least a certain percentage of free space on
the filesystem, shrinking the cache by culling the objects it contains to make
space if necessary - see the "Cache Culling" section.  This means it can be
placed on the same medium as a live set of data, and will expand to make use of
spare space and automatically contract when the set of data requires more
space.

============
REQUIREMENTS
============

The use of CacheFiles and its daemon requires the following features to be
available in the system and in the cache filesystem:

	- dnotify.

	- extended attributes (xattrs).

	- openat() and friends.

	- bmap() support on files in the filesystem (FIBMAP ioctl).

	- The use of bmap() to detect a partial page at the end of the file.

It is strongly recommended that the "dir_index" option is enabled on Ext3
filesystems being used as a cache.

=============
CONFIGURATION
=============

The cache is configured by a script in /etc/cachefilesd.conf.  These commands
set up cache ready for use.  The following script commands are available:

 (*) brun <N>%
 (*) bcull <N>%
 (*) bstop <N>%
 (*) frun <N>%
 (*) fcull <N>%
 (*) fstop <N>%

	Configure the culling limits.  Optional.  See the section on culling
	The defaults are 7% (run), 5% (cull) and 1% (stop) respectively.

	The commands beginning with a 'b' are file space (block) limits, those
	beginning with an 'f' are file count limits.

 (*) dir <path>

	Specify the directory containing the root of the cache.  Mandatory.

 (*) tag <name>

	Specify a tag to FS-Cache to use in distinguishing multiple caches.
	Optional.  The default is "CacheFiles".

 (*) debug <mask>

	Specify a numeric bitmask to control debugging in the kernel module.
	Optional.  The default is zero (all off).  The following values can be
	OR'd into the mask to collect various information:

		1	Turn on trace of function entry (_enter() macros)
		2	Turn on trace of function exit (_leave() macros)
		4	Turn on trace of internal debug points (_debug())

	This mask can also be set through sysfs, eg:

		echo 5 >/sys/modules/cachefiles/parameters/debug

==================
STARTING THE CACHE
==================

The cache is started by running the daemon.  The daemon opens the cache device,
configures the cache and tells it to begin caching.  At that point the cache
binds to fscache and the cache becomes live.

The daemon is run as follows:

	/sbin/cachefilesd [-d]* [-s] [-n] [-f <configfile>]

The flags are:

 (*) -d

	Increase the debugging level.  This can be specified multiple times and
	is cumulative with itself.

 (*) -s

	Send messages to stderr instead of syslog.

 (*) -n

	Don't daemonise and go into background.

 (*) -f <configfile>

	Use an alternative configuration file rather than the default one.

===============
THINGS TO AVOID
===============

Do not mount other things within the cache as this will cause problems.  The
kernel module contains its own very cut-down path walking facility that ignores
mountpoints, but the daemon can't avoid them.

Do not create, rename or unlink files and directories in the cache whilst the
cache is active, as this may cause the state to become uncertain.

Renaming files in the cache might make objects appear to be other objects (the
filename is part of the lookup key).

Do not change or remove the extended attributes attached to cache files by the
cache as this will cause the cache state management to get confused.

Do not create files or directories in the cache, lest the cache get confused or
serve incorrect data.

Do not chmod files in the cache.  The module creates things with minimal
permissions to prevent random users being able to access them directly.

=============
CACHE CULLING
=============

The cache may need culling occasionally to make space.  This involves
discarding objects from the cache that have been used less recently than
anything else.  Culling is based on the access time of data objects.  Empty
directories are culled if not in use.

Cache culling is done on the basis of the percentage of blocks and the
percentage of files available in the underlying filesystem.  There are six
"limits":

 (*) brun
 (*) frun

     If the amount of free space and the number of available files in the cache
     rises above both these limits, then culling is turned off.

 (*) bcull
 (*) fcull

     If the amount of available space or the number of available files in the
     cache falls below either of these limits, then culling is started.

 (*) bstop
 (*) fstop

     If the amount of available space or the number of available files in the
     cache falls below either of these limits, then no further allocation of
     disk space or files is permitted until culling has raised things above
     these limits again.

These must be configured thusly:

	0 <= bstop < bcull < brun < 100
	0 <= fstop < fcull < frun < 100

Note that these are percentages of available space and available files, and do
_not_ appear as 100 minus the percentage displayed by the "df" program.

The userspace daemon scans the cache to build up a table of cullable objects.
These are then culled in least recently used order.  A new scan of the cache is
started as soon as space is made in the table.  Objects will be skipped if
their atimes have changed or if the kernel module says it is still using them.

===============
CACHE STRUCTURE
===============

The CacheFiles module will create two directories in the directory it was
given:

 (*) cache/

 (*) graveyard/

The active cache objects all reside in the first directory.  The CacheFiles
kernel module moves any retired or culled objects that it can't simply unlink
to the graveyard from which the daemon will actually delete them.

The daemon uses dnotify to monitor the graveyard directory, and will delete
anything that appears therein.

The module represents index objects as directories with the filename "I..." or
"J...".  Note that the "cache/" directory is itself a special index.

Data objects are represented as files if they have no children, or directories
if they do.  Their filenames all begin "D..." or "E...".  If represented as a
directory, data objects will have a file in the directory called "data" that
actually holds the data.

Special objects are similar to data objects, except their filenames begin
"S..." or "T...".

If an object has children, then it will be represented as a directory.
Immediately in the representative directory are a collection of directories
named for hash values of the child object keys with an '@' prepended.  Into
this directory, if possible, will be placed the representations of the child
objects:

	INDEX     INDEX      INDEX                             DATA FILES
	========= ========== ================================= ================
	cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400
	cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...DB1ry
	cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...N22ry
	cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...FP1ry

If the key is so long that it exceeds NAME_MAX with the decorations added on to
it, then it will be cut into pieces, the first few of which will be used to
make a nest of directories, and the last one of which will be the objects
inside the last directory.  The names of the intermediate directories will have
'+' prepended:

	J1223/@23/+xy...z/+kl...m/Epqr

Note that keys are raw data, and not only may they exceed NAME_MAX in size,
they may also contain things like '/' and NUL characters, and so they may not
be suitable for turning directly into a filename.

To handle this, CacheFiles will use a suitably printable filename directly and
"base-64" encode ones that aren't directly suitable.  The two versions of
object filenames indicate the encoding:

	OBJECT TYPE	PRINTABLE	ENCODED
	===============	===============	===============
	Index		"I..."		"J..."
	Data		"D..."		"E..."
	Special		"S..."		"T..."

Intermediate directories are always "@" or "+" as appropriate.

Each object in the cache has an extended attribute label that holds the object
type ID (required to distinguish special objects) and the auxiliary data from
the netfs.  The latter is used to detect stale objects in the cache and update
or retire them.

Note that CacheFiles will erase from the cache any file it doesn't recognise or
any file of an incorrect type (such as a FIFO file or a device file).

==========================
SECURITY MODEL AND SELINUX
==========================

CacheFiles is implemented to deal properly with the LSM security features of
the Linux kernel and the SELinux facility.

One of the problems that CacheFiles faces is that it is generally acting on
behalf of a process, and running in that process's context, and that includes a
security context that is not appropriate for accessing the cache - either
because the files in the cache are inaccessible to that process, or because if
the process creates a file in the cache, that file may be inaccessible to other
processes.

The way CacheFiles works is to temporarily change the security context (fsuid,
fsgid and actor security label) that the process acts as - without changing the
security context of the process when it the target of an operation performed by
some other process (so signalling and suchlike still work correctly).

When the CacheFiles module is asked to bind to its cache, it:

 (1) Finds the security label attached to the root cache directory and uses
     that as the security label with which it will create files.  By default,
     this is:

	cachefiles_var_t

 (2) Finds the security label of the process which issued the bind request
     (presumed to be the cachefilesd daemon), which by default will be:

	cachefilesd_t

     and asks LSM to supply a security ID as which it should act given the
     daemon's label.  By default, this will be:

	cachefiles_kernel_t

     SELinux transitions the daemon's security ID to the module's security ID
     based on a rule of this form in the policy.

	type_transition <daemon's-ID> kernel_t : process <module's-ID>;

     For instance:

	type_transition cachefilesd_t kernel_t : process cachefiles_kernel_t;

The module's security ID gives it permission to create, move and remove files
and directories in the cache, to find and access directories and files in the
cache, to set and access extended attributes on cache objects, and to read and
write files in the cache.

The daemon's security ID gives it only a very restricted set of permissions: it
may scan directories, stat files and erase files and directories.  It may
not read or write files in the cache, and so it is precluded from accessing the
data cached therein; nor is it permitted to create new files in the cache.

There are policy source files available in:

	http://people.redhat.com/~dhowells/fscache/cachefilesd-0.8.tar.bz2

and later versions.  In that tarball, see the files:

	cachefilesd.te
	cachefilesd.fc
	cachefilesd.if

They are built and installed directly by the RPM.

If a non-RPM based system is being used, then copy the above files to their own
directory and run:

	make -f /usr/share/selinux/devel/Makefile
	semodule -i cachefilesd.pp

You will need checkpolicy and selinux-policy-devel installed prior to the
build.

By default, the cache is located in /var/fscache, but if it is desirable that
it should be elsewhere, than either the above policy files must be altered, or
an auxiliary policy must be installed to label the alternate location of the
cache.

For instructions on how to add an auxiliary policy to enable the cache to be
located elsewhere when SELinux is in enforcing mode, please see:

	/usr/share/doc/cachefilesd-*/move-cache.txt

When the cachefilesd rpm is installed; alternatively, the document can be found
in the sources.

==================
A NOTE ON SECURITY
==================

CacheFiles makes use of the split security in the task_struct.  It allocates
its own task_security structure, and redirects current->act_as to point to it
when it acts on behalf of another process, in that process's context.

The reason it does this is that it calls vfs_mkdir() and suchlike rather than
bypassing security and calling inode ops directly.  Therefore the VFS and LSM
may deny the CacheFiles access to the cache data because under some
circumstances the caching code is running in the security context of whatever
process issued the original syscall on the netfs.

Furthermore, should CacheFiles create a file or directory, the security
parameters with that object is created (UID, GID, security label) would be
derived from that process that issued the system call, thus potentially
preventing other processes from accessing the cache - including CacheFiles's
cache management daemon (cachefilesd).

What is required is to temporarily override the security of the process that
issued the system call.  We can't, however, just do an in-place change of the
security data as that affects the process as an object, not just as a subject.
This means it may lose signals or ptrace events for example, and affects what
the process looks like in /proc.

So CacheFiles makes use of a logical split in the security between the
objective security (task->sec) and the subjective security (task->act_as).  The
objective security holds the intrinsic security properties of a process and is
never overridden.  This is what appears in /proc, and is what is used when a
process is the target of an operation by some other process (SIGKILL for
example).

The subjective security holds the active security properties of a process, and
may be overridden.  This is not seen externally, and is used whan a process
acts upon another object, for example SIGKILLing another process or opening a
file.

LSM hooks exist that allow SELinux (or Smack or whatever) to reject a request
for CacheFiles to run in a context of a specific security label, or to create
files and directories with another security label.

This documentation is added by the patch to:

	Documentation/filesystems/caching/cachefiles.txt

Signed-Off-By: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2009-04-03 16:42:41 +01:00
David Howells
06b3db1b9b FS-Cache: Add main configuration option, module entry points and debugging
Add the main configuration option, allowing FS-Cache to be selected; the
module entry and exit functions and the debugging stuff used by these patches.

The two configuration options added are:

	CONFIG_FSCACHE
	CONFIG_FSCACHE_DEBUG

The first enables the facility, and the second makes the debugging statements
enableable through the "debug" module parameter.  The value of this parameter
is a bitmask as described in:

	Documentation/filesystems/caching/fscache.txt

The module can be loaded at this point, but all it will do at this point in
the patch series is to start up the slow work facility and shut it down again.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2009-04-03 16:42:36 +01:00
Boaz Harrosh
0d8fe329a8 fs: Add exofs to Kernel build
- Add exofs to fs/Kconfig under "menu 'Miscellaneous filesystems'"
- Add exofs to fs/Makefile

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-03-31 19:44:40 +03:00
Jan Kara
884d179dff quota: Move quota files into separate directory
Quota subsystem has more and more files. It's time to create a dir for it.

Signed-off-by: Jan Kara <jack@suse.cz>
2009-03-26 02:18:35 +01:00
Alexey Dobriyan
0fcb440889 fs/Kconfig: move 9p out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:16:01 +03:00
Alexey Dobriyan
b2480c7fbf fs/Kconfig: move afs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:16:01 +03:00
Alexey Dobriyan
33a1a6fedf fs/Kconfig: move coda out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:16:01 +03:00
Alexey Dobriyan
9d7d6447ef fs/Kconfig: move the rest of ncpfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:16:01 +03:00
Alexey Dobriyan
213a41d404 fs/Kconfig: move smbfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:16:01 +03:00
Alexey Dobriyan
9098c24f35 fs/Kconfig: move sunrpc out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:16:00 +03:00
Alexey Dobriyan
e2b329e200 fs/Kconfig: move nfsd out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:16:00 +03:00
Alexey Dobriyan
97afe47ac3 fs/Kconfig: move nfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:16:00 +03:00
Alexey Dobriyan
a276a52f9f fs/Kconfig: move ufs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:16:00 +03:00
Alexey Dobriyan
8af915ba1d fs/Kconfig: move sysv out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:59 +03:00
Alexey Dobriyan
41810246df fs/Kconfig: move romfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:59 +03:00
Alexey Dobriyan
4c7415830c fs/Kconfig: move qnx4 out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:59 +03:00
Alexey Dobriyan
928ea19295 fs/Kconfig: move hpfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:59 +03:00
Alexey Dobriyan
da55e6f928 fs/Kconfig: move omfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:58 +03:00
Alexey Dobriyan
8b1cd7d3c5 fs/Kconfig: move minix out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:58 +03:00
Alexey Dobriyan
22135169dd fs/Kconfig: move vxfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:58 +03:00
Alexey Dobriyan
22635ec9e0 fs/Kconfig: move squashfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:58 +03:00
Alexey Dobriyan
2a22783be0 fs/Kconfig: move cramfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:58 +03:00
Alexey Dobriyan
571f0a0bde fs/Kconfig: move efs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:57 +03:00
Alexey Dobriyan
0ff423849d fs/Kconfig: move bfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:57 +03:00
Alexey Dobriyan
0b09eb3298 fs/Kconfig: move befs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:57 +03:00
Alexey Dobriyan
b08bac1f18 fs/Kconfig: move hfs, hfsplus out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:57 +03:00
Alexey Dobriyan
295c896cb9 fs/Kconfig: move ecryptfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:56 +03:00
Alexey Dobriyan
10951bf05d fs/Kconfig: move affs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:56 +03:00
Alexey Dobriyan
bc2de2ae67 fs/Kconfig: move adfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:56 +03:00
Alexey Dobriyan
4591dabe27 fs/Kconfig: move configfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:56 +03:00
Alexey Dobriyan
5f3a211a8b fs/Kconfig: move sysfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:56 +03:00
Alexey Dobriyan
9d73ac9e8f fs/Kconfig: move ntfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:55 +03:00
Alexey Dobriyan
1c6ace019b fs/Kconfig: move fat out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:55 +03:00
Alexey Dobriyan
ddfaccd995 fs/Kconfig: move iso9660, udf out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:55 +03:00
Alexey Dobriyan
3ef7784e47 fs/Kconfig: move fuse out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:55 +03:00
Alexey Dobriyan
90ffd46793 fs/Kconfig: move autofs, autofs4 out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:54 +03:00
Alexey Dobriyan
335debee07 fs/Kconfig: move btrfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:54 +03:00
Alexey Dobriyan
2fe4371dff fs/Kconfig: move ocfs2 out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:54 +03:00
Alexey Dobriyan
f5c77969b3 fs/Kconfig: move jfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:54 +03:00
Alexey Dobriyan
b16ecfe2f9 fs/Kconfig: move reiserfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:53 +03:00
Linus Torvalds
31aeb6c815 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
  MAINTAINERS: squashfs entry
  Squashfs: documentation
  Squashfs: initrd support
  Squashfs: Kconfig entry
  Squashfs: Makefiles
  Squashfs: header files
  Squashfs: block operations
  Squashfs: cache operations
  Squashfs: uid/gid lookup operations
  Squashfs: fragment block operations
  Squashfs: export operations
  Squashfs: super block operations
  Squashfs: symlink operations
  Squashfs: regular file operations
  Squashfs: directory readdir operations
  Squashfs: directory lookup operations
  Squashfs: inode operations
2009-01-09 15:18:49 -08:00
Linus Torvalds
73d59314e6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (864 commits)
  Btrfs: explicitly mark the tree log root for writeback
  Btrfs: Drop the hardware crc32c asm code
  Btrfs: Add Documentation/filesystem/btrfs.txt, remove old COPYING
  Btrfs: kmap_atomic(KM_USER0) is safe for btrfs_readpage_end_io_hook
  Btrfs: Don't use kmap_atomic(..., KM_IRQ0) during checksum verifies
  Btrfs: tree logging checksum fixes
  Btrfs: don't change file extent's ram_bytes in btrfs_drop_extents
  Btrfs: Use btrfs_join_transaction to avoid deadlocks during snapshot creation
  Btrfs: drop remaining LINUX_KERNEL_VERSION checks and compat code
  Btrfs: drop EXPORT symbols from extent_io.c
  Btrfs: Fix checkpatch.pl warnings
  Btrfs: Fix free block discard calls down to the block layer
  Btrfs: avoid orphan inode caused by log replay
  Btrfs: avoid potential super block corruption
  Btrfs: do not call kfree if kmalloc failed in btrfs_sysfs_add_super
  Btrfs: fix a memory leak in btrfs_get_sb
  Btrfs: Fix typo in clear_state_cb
  Btrfs: Fix memset length in btrfs_file_write
  Btrfs: update directory's size when creating subvol/snapshot
  Btrfs: add permission checks to the ioctls
  ...
2009-01-09 13:01:38 -08:00
Randy Dunlap
67ec7d3ab7 fs: use menuconfig to control the Misc. filesystems menu
Have one option to control Miscellaneous filesystems.  This makes it easy
to disable all of them at one time.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:12 -08:00
Jan Kara
1a224ad11e ocfs2: Assign feature bits and system inodes to quota feature and quota files
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:23 -08:00