Commit Graph

111 Commits

Author SHA1 Message Date
Alan Cox
2cbf7fe2d5 i2o: move to staging
The I2O layer deals with a technology that to say the least didn't catch on
in the market.

The only relevant products are some of the AMI MegaRAID - which supported I2O
and its native mode (The native mode is faster and runs on Linux), an
obscure crypto ethernet card that's now so many years out of date nobody
would use it, the old DPT controllers, which speak their own dialect and
have their own driver - and ermm.. thats about it.

We also know the code isn't in good shape as recently a patch was proposed
and queried as buggy, which in turn showed the existing code was broken
already by prior "clean up" and nobody had noticed that either.

It's coding style robot code nothing more. Like some forgotten corridor
cleaned relentlessly by a lost Roomba but where no user has trodden in years.

Move it to staging and then to /dev/null.

The headers remain as they are shared with dpt_i2o.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-03 15:58:39 -08:00
Lars Poeschel
26713c8123 drivers/Kconfig: remove duplicate entry for soc
For some reason there was the same menu entry in menuconfig twice. This
trivial patch leaves the one that is older as is and removes the other
entry.

Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-25 20:26:42 +08:00
Linus Torvalds
dab363f938 Staging patches for 3.19-rc1
Here's the big staging tree pull request for 3.19-rc1.
 
 We continued to delete more lines than were added, always a good thing,
 but not at a huge rate this release, only about 70k lines removed
 overall mostly from removing the horrid bcm driver.
 
 Lots of normal staging driver cleanups and fixes all over the place,
 well over a thousand of them, the shortlog shows all the horrid details.
 
 The "contentious" thing here is the movement of the Android binder code
 out of staging into the "real" part of the kernel.  This is code that
 has been stable for a few years now and is working as-is in the tens of
 millions of devices with no issues.  Yes, the code is horrid, and the
 userspace api leaves a lot to be desired, but it's not going to change
 due to legacy issues that we have no control over.  Because so many
 devices and companies rely on this, and the code is stable, might as
 well promote it out of staging.
 
 This was all discussed at the Linux Plumbers conference, and everyone
 participating agreed that this was the best way forward.
 
 There is work happening to replace the binder code with something new
 that is happening right now, but I don't expect to see the results of
 that work for another year at the earliest.  If that ever happens, and
 Android switches over to it, I'll gladly remove this version.
 
 As for maintainers, I'll be glad to maintain this code, I've been doing
 it for the past few years with no problems.  I'll send a MAINTAINERS
 entry for it before 3.19-final is out, still need to talk to the Google
 developers about if they are willing to help with it or not, last I
 checked they were, which was good.
 
 All of these patches have been in linux-next for a while with no
 reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSPICkACgkQMUfUDdst+yksdwCfSLE9VUy1o2sAPDRe+J3bQced
 EWEAoL3RtnejKbo5tHS2IT69pLrwiIDS
 =YXyM
 -----END PGP SIGNATURE-----

Merge tag 'staging-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver updates from Greg KH:
 "Here's the big staging tree pull request for 3.19-rc1.

  We continued to delete more lines than were added, always a good
  thing, but not at a huge rate this release, only about 70k lines
  removed overall mostly from removing the horrid bcm driver.

  Lots of normal staging driver cleanups and fixes all over the place,
  well over a thousand of them, the shortlog shows all the horrid
  details.

  The "contentious" thing here is the movement of the Android binder
  code out of staging into the "real" part of the kernel.  This is code
  that has been stable for a few years now and is working as-is in the
  tens of millions of devices with no issues.  Yes, the code is horrid,
  and the userspace api leaves a lot to be desired, but it's not going
  to change due to legacy issues that we have no control over.  Because
  so many devices and companies rely on this, and the code is stable,
  might as well promote it out of staging.

  This was all discussed at the Linux Plumbers conference, and everyone
  participating agreed that this was the best way forward.

  There is work happening to replace the binder code with something new
  that is happening right now, but I don't expect to see the results of
  that work for another year at the earliest.  If that ever happens, and
  Android switches over to it, I'll gladly remove this version.

  As for maintainers, I'll be glad to maintain this code, I've been
  doing it for the past few years with no problems.  I'll send a
  MAINTAINERS entry for it before 3.19-final is out, still need to talk
  to the Google developers about if they are willing to help with it or
  not, last I checked they were, which was good.

  All of these patches have been in linux-next for a while with no
  reported issues"

* tag 'staging-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1382 commits)
  Staging: slicoss: Fix long line issues in slicoss.c
  staging: rtl8712: remove unnecessary else after return
  staging: comedi: change some printk calls to pr_err
  staging: rtl8723au: hal: Removed the extra semicolon
  lustre: Deletion of unnecessary checks before three function calls
  staging: lustre: fix sparse warnings: static function declaration
  staging: lustre: fixed sparse warnings related to static declarations
  staging: unisys: remove duplicate header
  staging: unisys: remove unneeded structure
  staging: ft1000 : replace __attribute ((__packed__) with __packed
  drivers: staging: rtl8192e: Include "asm/unaligned.h" instead of "access_ok.h" in "rtl819x_BAProc.c"
  Drivers:staging:rtl8192e: Fixed checkpatch warning
  Drivers:staging:clocking-wizard: Added a newline
  staging: clocking-wizard: check for a valid clk_name pointer
  staging: rtl8723au: Hal_InitPGData() avoid unnecessary typecasts
  staging: rtl8723au: _DisableAnalog(): Avoid zero-init variables unnecessarily
  staging: rtl8723au: Remove unnecessary wrapper _ResetDigitalProcedure1()
  staging: rtl8723au: _ResetDigitalProcedure1_92C() reduce code obfuscation
  staging: rtl8723au: Remove unnecessary wrapper _DisableRFAFEAndResetBB()
  staging: rtl8723au: _DisableRFAFEAndResetBB8192C(): Reduce code obfuscation
  ...
2014-12-15 18:06:13 -08:00
Thierry Reding
bd968d59ad ARM: tegra: Move AHB Kconfig to drivers/amba
This will allow the Kconfig option to be shared among 32-bit and 64-bit
ARM.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-26 09:43:25 +01:00
Greg Kroah-Hartman
777783e0ab staging: android: binder: move to the "real" part of the kernel
The Android binder code has been "stable" for many years now.  No matter
what comes in the future, we are going to have to support this API, so
might as well move it to the "real" part of the kernel as there's no
real work that needs to be done to the existing code.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-20 10:30:15 +08:00
Sandeep Nair
41f93af900 soc: ti: add Keystone Navigator QMSS driver
The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of
the main hardware sub system which forms the backbone of the Keystone
Multi-core Navigator. QMSS consist of queue managers, packed-data structure
processors(PDSP), linking RAM, descriptor pools and infrastructure
Packet DMA.

The Queue Manager is a hardware module that is responsible for accelerating
management of the packet queues. Packets are queued/de-queued by writing or
reading descriptor address to a particular memory mapped location. The PDSPs
perform QMSS related functions like accumulation, QoS, or event management.
Linking RAM registers are used to link the descriptors which are stored in
descriptor RAM. Descriptor RAM is configurable as internal or external memory.

The QMSS driver manages the PDSP setups, linking RAM regions,
queue pool management (allocation, push, pop and notify) and descriptor
pool management. The specifics on the device tree bindings for
QMSS can be found in:
	Documentation/devicetree/bindings/soc/keystone-navigator-qmss.txt

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sandeep Nair <sandeep_n@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2014-09-24 09:49:14 -04:00
Linus Torvalds
2521129a6d Char / Misc driver patches for 3.17-rc1
Here's the big driver misc / char pull request for 3.17-rc1.
 
 Lots of things in here, the thunderbolt support for Apple laptops, some
 other new drivers, testing fixes, and other good things.  All have been
 in linux-next for a long time.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlPf1LcACgkQMUfUDdst+ymaVwCgqMrKFmpduBufOSFROhxlfB5Q
 ajsAoNDmIn3pgla+kj23Y5ib20aMi++s
 =IdIr
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc driver patches from Greg KH:
 "Here's the big driver misc / char pull request for 3.17-rc1.

  Lots of things in here, the thunderbolt support for Apple laptops,
  some other new drivers, testing fixes, and other good things.  All
  have been in linux-next for a long time"

* tag 'char-misc-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (119 commits)
  misc: bh1780: Introduce the use of devm_kzalloc
  Lattice ECP3 FPGA: Correct endianness
  drivers/misc/ti-st: Load firmware from ti-connectivity directory.
  dt-bindings: extcon: Add support for SM5502 MUIC device
  extcon: sm5502: Change internal hardware switch according to cable type
  extcon: sm5502: Detect cable state after completing platform booting
  extcon: sm5502: Add support new SM5502 extcon device driver
  extcon: arizona: Get MICVDD against extcon device
  extcon: Remove unnecessary OOM messages
  misc: vexpress: Fix sparse non static symbol warnings
  mei: drop unused hw dependent fw status functions
  misc: bh1770glc: Use managed functions
  pcmcia: remove DEFINE_PCI_DEVICE_TABLE usage
  misc: remove DEFINE_PCI_DEVICE_TABLE usage
  ipack: Replace DEFINE_PCI_DEVICE_TABLE macro use
  drivers/char/dsp56k.c: drop check for negativity of unsigned parameter
  mei: fix return value on disconnect timeout
  mei: don't schedule suspend in pm idle
  mei: start disconnect request timer consistently
  mei: reset client connection state on timeout
  ...
2014-08-04 17:32:24 -07:00
Chen, Gong
76ac8275f2 trace, RAS: Add basic RAS trace event
To avoid confuision and conflict of usage for RAS related trace event,
add an unified RAS trace event stub.

Start a RAS subsystem menu which will be fleshed out in time, when more
features get added to it.

Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/1402475691-30045-2-git-send-email-gong.chen@linux.intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2014-06-23 10:12:19 -07:00
Andreas Noever
1660315366 thunderbolt: Add initial cactus ridge NHI support
Thunderbolt hotplug is supposed to be handled by the firmware. But Apple
decided to implement thunderbolt at the operating system level. The
firmare only initializes thunderbolt devices that are present at boot
time. This driver enables hotplug of thunderbolt of non-chained
thunderbolt devices on Apple systems with a cactus ridge controller.

This first patch adds the Kconfig file as well the parts of the driver
which talk directly to the hardware (that is pci device setup, interrupt
handling and RX/TX ring management).

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 14:04:52 -07:00
Santosh Shilimkar
3a6e08218f soc: Introduce drivers/soc place-holder for SOC specific drivers
Based on earlier thread "https://lkml.org/lkml/2013/10/7/662" and
discussion at Kernel Summit'2013, it was agreed to create
'driver/soc' for drivers which are quite SOC specific.

Further discussion on the subject is in response to
the earlier version of the patch is here:
	http://lwn.net/Articles/588942/

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sandeep Nair <sandeep_n@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-05-23 11:37:46 -05:00
Johannes Thumshirn
3764e82e51 drivers: Introduce MEN Chameleon Bus
The MCB (MEN Chameleon Bus) is a Bus specific to MEN Mikroelektronik
FPGA based devices. It is used to identify MCB based IP-Cores within
an FPGA and provide the necessary framework for instantiating drivers
for these devices.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28 15:36:37 -08:00
Kenneth Heitke
5a86bf3439 spmi: Linux driver framework for SPMI
System Power Management Interface (SPMI) is a specification
developed by the MIPI (Mobile Industry Process Interface) Alliance
optimized for the real time control of Power Management ICs (PMIC).

SPMI is a two-wire serial interface that supports up to 4 master
devices and up to 16 logical slaves.

The framework supports message APIs, multiple busses (1 controller
per bus) and multiple clients/slave devices per controller.

Signed-off-by: Kenneth Heitke <kheitke@codeaurora.org>
Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-15 11:55:28 -08:00
Linus Torvalds
f9300eaaac ACPI and power management updates for 3.13-rc1
- New power capping framework and the the Intel Running Average Power
    Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.
 
  - Addition of the in-kernel switching feature to the arm_big_little
    cpufreq driver from Viresh Kumar and Nicolas Pitre.
 
  - cpufreq support for iMac G5 from Aaro Koskinen.
 
  - Baytrail processors support for intel_pstate from Dirk Brandewie.
 
  - cpufreq support for Midway/ECX-2000 from Mark Langsdorf.
 
  - ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.
 
  - ACPI power management support for the I2C and SPI bus types from
    Mika Westerberg and Lv Zheng.
 
  - cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
    Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.
 
  - cpufreq drivers updates (mostly fixes and cleanups) from Viresh Kumar,
    Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz Majewski,
    Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.
 
  - intel_pstate updates from Dirk Brandewie and Adrian Huang.
 
  - ACPICA update to version 20130927 includig fixes and cleanups and
    some reduction of divergences between the ACPICA code in the kernel
    and ACPICA upstream in order to improve the automatic ACPICA patch
    generation process.  From Bob Moore, Lv Zheng, Tomasz Nowicki,
    Naresh Bhat, Bjorn Helgaas, David E Box.
 
  - ACPI IPMI driver fixes and cleanups from Lv Zheng.
 
  - ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani,
    Zhang Yanfei, Rafael J Wysocki.
 
  - Conversion of the ACPI AC driver to the platform bus type and
    multiple driver fixes and cleanups related to ACPI from Zhang Rui.
 
  - ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
    Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.
 
  - Fixes and cleanups and new blacklist entries related to the ACPI
    video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
    Kirill Tkhai.
 
  - cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.
 
  - cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
    Bartlomiej Zolnierkiewicz, Prarit Bhargava.
 
  - devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.
 
  - Operation Performance Points (OPP) core updates from Nishanth Menon.
 
  - Runtime power management core fix from Rafael J Wysocki and update
    from Ulf Hansson.
 
  - Hibernation fixes from Aaron Lu and Rafael J Wysocki.
 
  - Device suspend/resume lockup detection mechanism from Benoit Goby.
 
  - Removal of unused proc directories created for various ACPI drivers
    from Lan Tianyu.
 
  - ACPI LPSS driver fix and new device IDs for the ACPI platform scan
    handler from Heikki Krogerus and Jarkko Nikula.
 
  - New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.
 
  - Assorted fixes and cleanups related to ACPI from Andy Shevchenko,
    Al Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
    Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
    Liu Chuansheng.
 
  - Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
    Jean-Christophe Plagniol-Villard.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABCAAGBQJSfPKLAAoJEILEb/54YlRxH6YQAJwDKi25RCZziFSIenXuqzC/
 c6JxoH/tSnDHJHhcTgqh7H7Raa+zmatMDf0m2oEv2Wjfx4Lt4BQK4iefhe/zY4lX
 yJ8uXDg+U8DYhDX2XwbwnFpd1M1k/A+s2gIHDTHHGnE0kDngXdd8RAFFktBmooTZ
 l5LBQvOrTlgX/ZfqI/MNmQ6lfY6kbCABGSHV1tUUsDA6Kkvk/LAUTOMSmptv1q22
 hcs6k55vR34qADPkUX5GghjmcYJv+gNtvbDEJUjcmCwVoPWouF415m7R5lJ8w3/M
 49Q8Tbu5HELWLwca64OorS8qh/P7sgUOf1BX5IDzHnJT+TGeDfvcYbMv2Z275/WZ
 /bqhuLuKBpsHQ2wvEeT+lYV3FlifKeTf1FBxER3ApjzI3GfpmVVQ+dpEu8e9hcTh
 ZTPGzziGtoIsHQ0unxb+zQOyt1PmIk+cU4IsKazs5U20zsVDMcKzPrb19Od49vMX
 gCHvRzNyOTqKWpE83Ss4NGOVPAG02AXiXi/BpuYBHKDy6fTH/liKiCw5xlCDEtmt
 lQrEbupKpc/dhCLo5ws6w7MZzjWJs2eSEQcNR4DlR++pxIpYOOeoPTXXrghgZt2X
 mmxZI2qsJ7GAvPzII8OBeF3CRO3fabZ6Nez+M+oEZjGe05ZtpB3ccw410HwieqBn
 dYpJFt/BHK189odhV9CM
 =JCxk
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael J Wysocki:

 - New power capping framework and the the Intel Running Average Power
   Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.

 - Addition of the in-kernel switching feature to the arm_big_little
   cpufreq driver from Viresh Kumar and Nicolas Pitre.

 - cpufreq support for iMac G5 from Aaro Koskinen.

 - Baytrail processors support for intel_pstate from Dirk Brandewie.

 - cpufreq support for Midway/ECX-2000 from Mark Langsdorf.

 - ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.

 - ACPI power management support for the I2C and SPI bus types from Mika
   Westerberg and Lv Zheng.

 - cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
   Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.

 - cpufreq drivers updates (mostly fixes and cleanups) from Viresh
   Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz
   Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.

 - intel_pstate updates from Dirk Brandewie and Adrian Huang.

 - ACPICA update to version 20130927 includig fixes and cleanups and
   some reduction of divergences between the ACPICA code in the kernel
   and ACPICA upstream in order to improve the automatic ACPICA patch
   generation process.  From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh
   Bhat, Bjorn Helgaas, David E Box.

 - ACPI IPMI driver fixes and cleanups from Lv Zheng.

 - ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang
   Yanfei, Rafael J Wysocki.

 - Conversion of the ACPI AC driver to the platform bus type and
   multiple driver fixes and cleanups related to ACPI from Zhang Rui.

 - ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
   Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.

 - Fixes and cleanups and new blacklist entries related to the ACPI
   video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
   Kirill Tkhai.

 - cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.

 - cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
   Bartlomiej Zolnierkiewicz, Prarit Bhargava.

 - devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.

 - Operation Performance Points (OPP) core updates from Nishanth Menon.

 - Runtime power management core fix from Rafael J Wysocki and update
   from Ulf Hansson.

 - Hibernation fixes from Aaron Lu and Rafael J Wysocki.

 - Device suspend/resume lockup detection mechanism from Benoit Goby.

 - Removal of unused proc directories created for various ACPI drivers
   from Lan Tianyu.

 - ACPI LPSS driver fix and new device IDs for the ACPI platform scan
   handler from Heikki Krogerus and Jarkko Nikula.

 - New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.

 - Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al
   Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
   Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
   Liu Chuansheng.

 - Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
   Jean-Christophe Plagniol-Villard.

* tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits)
  cpufreq: conservative: fix requested_freq reduction issue
  ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines
  PM / runtime: Use pm_runtime_put_sync() in __device_release_driver()
  ACPI / event: remove unneeded NULL pointer check
  Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1"
  ACPI / video: Quirk initial backlight level 0
  ACPI / video: Fix initial level validity test
  intel_pstate: skip the driver if ACPI has power mgmt option
  PM / hibernate: Avoid overflow in hibernate_preallocate_memory()
  ACPI / hotplug: Do not execute "insert in progress" _OST
  ACPI / hotplug: Carry out PCI root eject directly
  ACPI / hotplug: Merge device hot-removal routines
  ACPI / hotplug: Make acpi_bus_hot_remove_device() internal
  ACPI / hotplug: Simplify device ejection routines
  ACPI / hotplug: Fix handle_root_bridge_removal()
  ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug
  ACPI / scan: Start matching drivers after trying scan handlers
  ACPI: Remove acpi_pci_slot_init() headers from internal.h
  ACPI / blacklist: fix name of ThinkPad Edge E530
  PowerCap: Fix build error with option -Werror=format-security
  ...

Conflicts:
	arch/arm/mach-omap2/opp.c
	drivers/Kconfig
	drivers/spi/spi.c
2013-11-14 13:41:48 +09:00
Srinivas Pandruvada
12cc4b3827 PowerCap: Add to drivers Kconfig and Makefile
Added changes to Makefile and Kconfig to include in driver build.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-17 00:36:06 +02:00
Kishon Vijay Abraham I
ff76496347 drivers: phy: add generic PHY framework
The PHY framework provides a set of APIs for the PHY drivers to
create/destroy a PHY and APIs for the PHY users to obtain a reference to the
PHY with or without using phandle. For dt-boot, the PHY drivers should
also register *PHY provider* with the framework.

PHY drivers should create the PHY by passing id and ops like init, exit,
power_on and power_off. This framework is also pm runtime enabled.

The documentation for the generic PHY framework is added in
Documentation/phy.txt and the documentation for dt binding can be found at
Documentation/devicetree/bindings/phy/phy-bindings.txt

Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-27 17:35:41 -07:00
Linus Torvalds
3aa78e0cb5 For the 3.11 merge we only have one new MFD driver for the Kontron PLD.
But we also have:
 
 - Support for the TPS659038 PMIC from the palmas driver.
 
 - Intel's Coleto Creek and Avoton SoCs support from the lpc_ich driver.
 
 - RTL8411B support from the rtsx driver.
 
 - More DT support for the Arizona, max8998, twl4030-power and the
   ti_am335x_tsadc drivers.
 
 - The SSBI driver move under MFD.
 
 - A conversion to the devm_* API for most of the MFD drivers.
 
 - The twl4030-power got split from twl-core into its own module.
 
 - A major ti_am335x_adc cleanup, leading to a proper DT support.
 
 - Our regular arizona and wm* updates and cleanups from the Wolfson
   folks.
 
 - A better error handling and initialization, and a regulator subdevice
   addition for the 88pm80x driver.
 
 - A bulk platform_set_drvdata() call removal that's no longer need since
   commit 0998d063.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJR2zCaAAoJEIqAPN1PVmxK29EP/ieZf7Z7z7bg/0lEOvtOzACy
 WoCdSGFu5XcHOnlv0Fl1Rr/1AJFQoh4KugkGnVyrlztYVOFymj5VDdd8B43cxMLt
 7ymK/3crIH7uJuOoeDoDr3glLuo0TGB9f5Kv4ITdVD3/+AuqY4VIAisEDb0aWghW
 +v0I3fYeGdwRv+IqO5wacvddSoLa4rmOhnpbVMB2O1Y/LCm/yHI6tAFx1+AfH7y8
 zMHbGFc+gHg1xupJBCnRel0v8J+KNc02G/B1zNom/avL8b/mNXNI8JFxs3bMA0r8
 NpTHJ49OVPbhBQTA4U+BPoG4nzOiAOj0czf9dkGa5cyR8t4C9mmK+s8QHwepzrSG
 qbhCgTqp4bomB1m0RAO+z4F6BHTpmoChpho2btrwN9ZmhMHQeTWnGjjhEwZngpBq
 F22DC6k5ipV0k4962ZHfZ76v2Vot1gfd6zQ5r+2oHMMfWaKgS4L5efP2/wsU9H58
 BxMm84C7OWbgcTRmNn9jl4L9phBD31wvNANfUeMhLMyshnwPK5ZuUdX/+K2rq6h9
 w26Hg62HtKZFv/TEsCBQqpB6zSZa4u/KZzvwEahllQSQGKxIHaNYGtLGzJj9sCM+
 baT/82DFKuEvKfJpUKSBMznImp4WNGEz+8s2w4m/Ssuf30GN2GHjM9Q4gcHJu2mk
 7fTrsSHWYN+EHVzh1Zb8
 =RqMp
 -----END PGP SIGNATURE-----

Merge tag 'mfd-3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next

Pull MFD update from Samuel Ortiz:
 "For the 3.11 merge we only have one new MFD driver for the Kontron
  PLD.

  But we also have:
   - Support for the TPS659038 PMIC from the palmas driver.
   - Intel's Coleto Creek and Avoton SoCs support from the lpc_ich
     driver.
   - RTL8411B support from the rtsx driver.
   - More DT support for the Arizona, max8998, twl4030-power and the
     ti_am335x_tsadc drivers.
   - The SSBI driver move under MFD.
   - A conversion to the devm_* API for most of the MFD drivers.
   - The twl4030-power got split from twl-core into its own module.
   - A major ti_am335x_adc cleanup, leading to a proper DT support.
   - Our regular arizona and wm* updates and cleanups from the Wolfson
     folks.
   - A better error handling and initialization, and a regulator
     subdevice addition for the 88pm80x driver.
   - A bulk platform_set_drvdata() call removal that's no longer need
     since commit 0998d06310 ("device-core: Ensure drvdata = NULL when
     no driver is bound")

* tag 'mfd-3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (102 commits)
  mfd: sec: Provide max_register to regmap
  mfd: wm8994: Remove duplicate check for active JACKDET
  MAINTAINERS: Add include directory to MFD file patterns
  mfd: sec: Remove fields not used since regmap conversion
  watchdog: Kontron PLD watchdog timer driver
  mfd: max8998: Add support for Device Tree
  regulator: max8998: Use arrays for specifying voltages in platform data
  mfd: max8998: Add irq domain support
  regulator: palmas: Add TPS659038 support
  mfd: Kontron PLD mfd driver
  mfd: palmas: Add TPS659038 PMIC support
  mfd: palmas: Add SMPS10_BOOST feature
  mfd: palmas: Check if irq is valid
  mfd: lpc_ich: iTCO_wdt patch for Intel Coleto Creek DeviceIDs
  mfd: twl-core: Change TWL6025 references to TWL6032
  mfd: davinci_voicecodec: Fix build breakage
  mfd: vexpress: Make the driver optional for arm and arm64
  mfd: htc-egpio: Use devm_ioremap_nocache() instead of ioremap_nocache()
  mfd: davinci_voicecodec: Convert to use devm_* APIs
  mfd: twl4030-power: Fix relocking on error
  ...
2013-07-10 11:10:27 -07:00
Alessandro Rubini
9c9f32edde FMC: create drivers/fmc and toplevel Kconfig question
This commit creates the drivers/fmc directory and puts the necessary
hooks for kbuild and kconfig.  The code is currently a placeholder
that only registers an empty bus.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Acked-by: Juan David Gonzalez Cobas <dcobas@cern.ch>
Acked-by: Emilio G. Cota <cota@braap.org>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17 16:38:57 -07:00
Arnd Bergmann
45fcac1aad mfd: Move ssbi driver into drivers/mfd
There is no reason for ssbi to have its own top-level driver directory
when the only users of this interface are all MFD drivers. The only
mainline driver using it at the moment (PM8921) is marked broken and in
fact does not compile. I have verified that fixing the trivial build
breakage in pm8921 links in the new ssbi code just fine, but that
can be a separate patch.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-11 19:27:51 +02:00
Linus Torvalds
6fa52ed33b ARM: arm-soc driver changes for 3.10
This is a rather large set of patches for device drivers that for one
 reason or another the subsystem maintainer preferred to get merged
 through the arm-soc tree. There are both new drivers as well as
 existing drivers that are getting converted from platform-specific
 code into standalone drivers using the appropriate subsystem
 specific interfaces.
 
 In particular, we can now have pinctrl, clk, clksource and irqchip
 drivers in one file per driver, without the need to call into
 platform specific interface, or to get called from platform specific
 code, as long as all information about the hardware is provided
 through a device tree.
 
 Most of the drivers we touch this time are for clocksource. Since
 now most of them are part of drivers/clocksource, I expect that we
 won't have to touch these again from arm-soc and can let the
 clocksource maintainers take care of these in the future.
 
 Another larger part of this series is specific to the exynos platform,
 which is seeing some significant effort in upstreaming and
 modernization of its device drivers this time around, which
 unfortunately is also the cause for the churn and a lot of the
 merge conflicts.
 
 There is one new subsystem that gets merged as part of this series:
 the reset controller interface, which is a very simple interface
 for taking devices on the SoC out of reset or back into reset.
 Patches to use this interface on i.MX follow later in this merge
 window, and we are going to have other platforms (at least tegra
 and sirf) get converted in 3.11. This will let us get rid of
 platform specific callbacks in a number of platform independent
 device drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRhKUsAAoJEIwa5zzehBx3Ug4P/RqEen15hxS/NY8SIVRAU5c0
 G9ZiSPcLmvXGR/t1RZFeLWKaKOYRb2oW1EbXrlkddprkmg85RuQE/KMpCgzPPhVC
 Yrs8UaagMGblaLOjwavVjin/CUXZokRdMfsQoIyMGOezmVGFnv4d4Kt64IOf35DF
 24vDv/QO0BAI9k6m6WLqlWvSshb0IkW8r2LneRLnMEAVop7b1xkOxz0sR6l0LWfV
 6JAMXyTjJMg0t8uCVW/QyNdxcxINHhV4SYcNkzF3EZ7ol50OiJsT9fg0XW759+Wb
 vlX6Xuehg+CBOg+g3ZOZuR8JOEkOhAGRSzuJkk/TmLCCxc+ghnuYz8HArxh6GMHK
 KaxvogLIi0ZsD94A/BZIKkDtOLWlzdz2HBrYo9PTz8zrOz/gXhwQ3zq0jPccC5E0
 S+YYiobCBXepknF9301ti7wGD9VDzI8nmqOKG6tEBrD3xuO+RoBv+z4pBugN4/1C
 DlB19gOz60G5kniziL+wlmWER2qXmYrQZqS+s6+B2XoyoETC0Yij3Rck5vyC6qIK
 A2sni+Y9rzNOB9nzmnISP/UiGUffCy8AV4DZJjMSl0XkF4cpOXqRVGZ2nGB4tR5q
 GTOETcDCo5dvMDKX7Wfrz40CQzO39tnPCddg3OIS93ZwMpCeykIlb1FVL7RcsyF7
 3uikzYHlDo3C5pvtJ5TS
 =ZWk9
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver changes from Olof Johansson:
 "This is a rather large set of patches for device drivers that for one
  reason or another the subsystem maintainer preferred to get merged
  through the arm-soc tree.  There are both new drivers as well as
  existing drivers that are getting converted from platform-specific
  code into standalone drivers using the appropriate subsystem specific
  interfaces.

  In particular, we can now have pinctrl, clk, clksource and irqchip
  drivers in one file per driver, without the need to call into platform
  specific interface, or to get called from platform specific code, as
  long as all information about the hardware is provided through a
  device tree.

  Most of the drivers we touch this time are for clocksource.  Since now
  most of them are part of drivers/clocksource, I expect that we won't
  have to touch these again from arm-soc and can let the clocksource
  maintainers take care of these in the future.

  Another larger part of this series is specific to the exynos platform,
  which is seeing some significant effort in upstreaming and
  modernization of its device drivers this time around, which
  unfortunately is also the cause for the churn and a lot of the merge
  conflicts.

  There is one new subsystem that gets merged as part of this series:
  the reset controller interface, which is a very simple interface for
  taking devices on the SoC out of reset or back into reset.  Patches to
  use this interface on i.MX follow later in this merge window, and we
  are going to have other platforms (at least tegra and sirf) get
  converted in 3.11.  This will let us get rid of platform specific
  callbacks in a number of platform independent device drivers."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits)
  irqchip: s3c24xx: add missing __init annotations
  ARM: dts: Disable the RTC by default on exynos5
  clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3}
  ARM: exynos: restore mach/regs-clock.h for exynos5
  clocksource: exynos_mct: fix build error on non-DT
  pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register()
  irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure
  reset: NULL deref on allocation failure
  reset: Add reset controller API
  dt: describe base reset signal binding
  ARM: EXYNOS: Add arm-pmu DT binding for exynos421x
  ARM: EXYNOS: Add arm-pmu DT binding for exynos5250
  ARM: EXYNOS: Enable PMUs for exynos4
  irqchip: exynos-combiner: Correct combined IRQs for exynos4
  irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq
  ARM: EXYNOS: fix compilation error introduced due to common clock migration
  clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3}
  clk: exynos4: export clocks required for fimc-is
  clk: samsung: Fix compilation error
  clk: tegra: fix enum tegra114_clk to match binding
  ...
2013-05-04 12:31:18 -07:00
Randy Dunlap
966f3096b1 kconfig menu: move Virtualization drivers near other virtualization options
Make virtualization drivers be logically grouped together (physically
near each other) in the kconfig menu by moving "Virtualization drivers"
to be near "Virtio drivers", Microsort Hyper-V, and Xen driver support.

This is just a user-friendly, visual search change.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alexander Graf <agraf@suse.de>
Cc: Stuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:09 -07:00
Philipp Zabel
61fc413176 reset: Add reset controller API
This adds a simple API for devices to request being reset
by separate reset controller hardware and implements the
reset signal device tree binding.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
2013-04-12 10:26:23 +02:00
Kenneth Heitke
e44b0ceee4 add single-wire serial bus interface (SSBI) driver
SSBI is the Qualcomm single-wire serial bus interface used to connect
the MSM devices to the PMIC and other devices.

Since SSBI only supports a single slave, the driver gets the name of the
slave device passed in from the board file through the master device's
platform data.

SSBI registers pretty early (postcore), so that the PMIC can come up
before the board init. This is useful if the board init requires the
use of gpios that are connected through the PMIC.

Based on a patch by Dima Zavin <dima@android.com> that can be found at:
http://android.git.kernel.org/?p=kernel/msm.git;a=commitdiff;h=eb060bac4

This patch adds PMIC Arbiter support for the MSM8660. The PMIC Arbiter
is a hardware wrapper around the SSBI 2.0 controller that is designed to
overcome concurrency issues and security limitations.  A controller_type
field is added to the platform data to specify the type of the SSBI
controller (1.0, 2.0, or PMIC Arbiter).

[davidb@codeaurora.org:
 I've moved this driver into drivers/ssbi/ and added an include for
 linux/module.h so that it will compile]

Signed-off-by: Kenneth Heitke <kheitke@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25 10:33:56 -07:00
Linus Torvalds
7ed214ac20 Char/Misc driver patches for 3.9-rc1
Here's the big char/misc driver patches for 3.9-rc1.
 
 Nothing major here, just lots of different driver updates (mei, hyperv, ipack,
 extcon, vmci, etc.).
 
 All of these have been in the linux-next tree for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlEmZJgACgkQMUfUDdst+ymhZgCgo2dn37r9uMCwgTSpxSq92Je5
 x8kAnRF1UnD6ZvySRIlLUBV5LW1YgFnK
 =i5HH
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver patches from Greg Kroah-Hartman:
 "Here's the big char/misc driver patches for 3.9-rc1.

  Nothing major here, just lots of different driver updates (mei,
  hyperv, ipack, extcon, vmci, etc.).

  All of these have been in the linux-next tree for a while."

* tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits)
  w1: w1_therm: Add force-pullup option for "broken" sensors
  w1: ds2482: Added 1-Wire pull-up support to the driver
  vme: add missing put_device() after device_register() fails
  extcon: max8997: Use workqueue to check cable state after completing boot of platform
  extcon: max8997: Set default UART/USB path on probe
  extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type
  extcon: max8997: Set default of ADC debounce time during initialization
  extcon: max8997: Remove duplicate code related to set H/W line path
  extcon: max8997: Move defined constant to header file
  extcon: max77693: Make max77693_extcon_cable static
  extcon: max8997: Remove unreachable code
  extcon: max8997: Make max8997_extcon_cable static
  extcon: max77693: Remove unnecessary goto statement to improve readability
  extcon: max77693: Convert to devm_input_allocate_device()
  extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style
  CREDITS: update email and address of Harald Hoyer
  extcon: arizona: Use MICDET for final microphone identification
  extcon: arizona: Always take the first HPDET reading as the final one
  extcon: arizona: Clear _trig_sts bits after jack detection
  extcon: arizona: Don't HPDET magic when headphones are enabled
  ...
2013-02-21 13:57:13 -08:00
Rob Herring
300586778d ARM / highbank: add support for pl320 IPC
The pl320 IPC allows for interprocessor communication between the
highbank A9 and the EnergyCore Management Engine. The pl320 implements
a straightforward mailbox protocol.

Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-02 00:01:15 +01:00
Jon Mason
fce8a7bb5b PCI-Express Non-Transparent Bridge Support
A PCI-Express non-transparent bridge (NTB) is a point-to-point PCIe bus
connecting 2 systems, providing electrical isolation between the two subsystems.
A non-transparent bridge is functionally similar to a transparent bridge except
that both sides of the bridge have their own independent address domains.  The
host on one side of the bridge will not have the visibility of the complete
memory or I/O space on the other side of the bridge.  To communicate across the
non-transparent bridge, each NTB endpoint has one (or more) apertures exposed to
the local system.  Writes to these apertures are mirrored to memory on the
remote system.  Communications can also occur through the use of doorbell
registers that initiate interrupts to the alternate domain, and scratch-pad
registers accessible from both sides.

The NTB device driver is needed to configure these memory windows, doorbell, and
scratch-pad registers as well as use them in such a way as they can be turned
into a viable communication channel to the remote system.  ntb_hw.[ch]
determines the usage model (NTB to NTB or NTB to Root Port) and abstracts away
the underlying hardware to provide access and a common interface to the doorbell
registers, scratch pads, and memory windows.  These hardware interfaces are
exported so that other, non-mainlined kernel drivers can access these.
ntb_transport.[ch] also uses the exported interfaces in ntb_hw.[ch] to setup a
communication channel(s) and provide a reliable way of transferring data from
one side to the other, which it then exports so that "client" drivers can access
them.  These client drivers are used to provide a standard kernel interface
(i.e., Ethernet device) to NTB, such that Linux can transfer data from one
system to the other in a standard way.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17 19:11:14 -08:00
Greg Kroah-Hartman
05e5027efc Staging: ipack: move out of staging
The ipack subsystem is cleaned up enough to now move out of the staging
tree, and into drivers/ipack.

Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Cc: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16 08:14:18 -08:00
Linus Torvalds
8f446a7a06 ARM: soc: driver specific changes
- A long-coming conversion of various platforms to a common LED
   infrastructure
 - AT91 is moved over to use the newer MCI driver for MMC
 - Pincontrol conversions for samsung platforms
 - DT bindings for gscaler on samsung
 - i2c driver fixes for tegra, acked by i2c maintainer
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO48AAoJEIwa5zzehBx3excP/ieEkRhvfnWxdYST6ekvGIQr
 nEyskOh2rVjgYKmSXUJyKSbvG+7bZ8VIxvPvojeAJ/R84pTFMzbR2F0CaPKzAuSW
 inDt6c0Bnx1NZlfUTAoXcz7feyq9zHYNs9BCLoPU0bYNchCCqcWSKzqnpXk2ph/P
 LFnmNa0j6a4E3QJYAjM2zFvc3Tgk+MWTq1fWwNFvsWTh2WbQtmB/iGnzT5Xs4XQh
 u1SSx5tz0lcF5zQRGmJhXgL5+nnIP4sRwRUBAkpe3Gv5cM6WBVEBRDANa5QpbUL2
 RXK5YyCTIln2Me4bPk32zEBLjiZ/WXbmiA2uwoqVgy6XToubemDXd0PtKmjj5tZ1
 BkTD1DND7BKBEQnJj/GBECEdvx2FbrKfruoPcJHvXPZ7Svn5Dt/MWYJQIkRFkuhL
 zlVNoDGWlU8nScGrgmTM56UvWmGWC3UFsWSgdVQNfW9yEva+G1FvRUwUH02Ip5Ad
 4r28JFIn6zyjtM99ZHipU6C6Rze2ordC7fl5X5LBLkVOobioblxCAhIhcqkhfKsk
 rFriNsdfYs7SrJA7mK7GzvaMEJgp/5o1noJKXI7ZBcLI8yYagzbQbPu/vGi6G6d3
 0xC7NaTEJbtoXoDAtmtilLRxmw0YCXgVBBGua0K2YKpcRwnzCHNbV4gsLMnDuOXS
 HP4M96LxLHJlLGCxhEme
 =ck7M
 -----END PGP SIGNATURE-----

Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc driver specific changes from Olof Johansson:
 - A long-coming conversion of various platforms to a common LED
   infrastructure
 - AT91 is moved over to use the newer MCI driver for MMC
 - Pincontrol conversions for samsung platforms
 - DT bindings for gscaler on samsung
 - i2c driver fixes for tegra, acked by i2c maintainer

Fix up conflicts as per Olof.

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  drivers: bus: omap_l3: use resources instead of hardcoded irqs
  pinctrl: exynos: Fix wakeup IRQ domain registration check
  pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data
  pinctrl: exynos: Correct the detection of wakeup-eint node
  pinctrl: exynos: Mark exynos_irq_demux_eint as inline
  pinctrl: exynos: Handle only unmasked wakeup interrupts
  pinctrl: exynos: Fix typos in gpio/wkup _irq_mask
  pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa
  drivers: bus: Move the OMAP interconnect driver to drivers/bus/
  i2c: tegra: dynamically control fast clk
  i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20
  ARM: tegra: clock: remove unused clock entry for i2c
  ARM: tegra: clock: add connection name in i2c clock entry
  i2c: tegra: pass proper name for getting clock
  ARM: tegra: clock: add i2c fast clock entry in clock table
  ARM: EXYNOS: Adds G-Scaler device from Device Tree
  ARM: EXYNOS: Add clock support for G-Scaler
  ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform
  ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC
  ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used
  ...
2012-10-01 18:46:13 -07:00
Simon Arlott
89214f009c ARM: bcm2835: add interrupt controller driver
The BCM2835 contains a custom interrupt controller, which supports 72
interrupt sources using a 2-level register scheme. The interrupt
controller, or the HW block containing it, is referred to occasionally
as "armctrl" in the SoC documentation, hence the symbol naming in the
code.

This patch was extracted from git://github.com/lp0/linux.git branch
rpi-split as of 2012/09/08, and modified as follows:

* s/bcm2708/bcm2835/.
* Modified device tree vendor prefix.
* Moved implementation to drivers/irchip/.
* Added devicetree documentation, and hence removed list of IRQs from
  bcm2835.dtsi.
* Changed shift in MAKE_HWIRQ() and HWIRQ_BANK() from 8 to 5 to reduce
  the size of the hwirq space, and pass the total size of the hwirq space
  to irq_domain_add_linear(), rather than just the number of valid hwirqs;
  the two are different due to the hwirq space being sparse.
* Added the interrupt controller DT node to the top-level of the DT,
  rather than nesting it inside a /axi node. Hence, changed the reg value
  since /axi had a ranges property. This seems simpler to me, but I'm not
  sure if everyone will like this change or not.
* Don't set struct irq_domain_ops.map = irq_domain_simple_map, hence
  removing the need to patch include/linux/irqdomain.h or
  kernel/irq/irqdomain.c.
* Simplified armctrl_of_init() using of_iomap().
* Removed unused IS_VALID_BANK()/IS_VALID_IRQ() macros.
* Renamed armctrl_handle_irq() to prevent possible symbol clashes.
* Made armctrl_of_init() static.
* Removed comment "Each bank is registered as a separate interrupt
  controller" since this is no longer true.
* Removed FSF address from license header.
* Added my name to copyright header.

Signed-off-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Dom Cobley <dc4@broadcom.com>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-19 19:08:37 -06:00
Kishon Vijay Abraham I
26a84b3eae drivers: bus: add a new driver for omap-ocp2scp
Adds a new driver *omap-ocp2scp*. This driver takes the responsibility of
creating all the devices that is connected to OCP2SCP. In the case of OMAP4,
USB2PHY is connected to ocp2scp.

This also includes device tree support for ocp2scp driver and
the documentation with device tree binding information is updated.

Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-22 14:31:49 +02:00
Alex Williamson
cba3345cc4 vfio: VFIO core
VFIO is a secure user level driver for use with both virtual machines
and user level drivers.  VFIO makes use of IOMMU groups to ensure the
isolation of devices in use, allowing unprivileged user access.  It's
intended that VFIO will replace KVM device assignment and UIO drivers
(in cases where the target platform includes a sufficiently capable
IOMMU).

New in this version of VFIO is support for IOMMU groups managed
through the IOMMU core as well as a rework of the API, removing the
group merge interface.  We now go back to a model more similar to
original VFIO with UIOMMU support where the file descriptor obtained
from /dev/vfio/vfio allows access to the IOMMU, but only after a
group is added, avoiding the previous privilege issues with this type
of model.  IOMMU support is also now fully modular as IOMMUs have
vastly different interface requirements on different platforms.  VFIO
users are able to query and initialize the IOMMU model of their
choice.

Please see the follow-on Documentation commit for further description
and usage example.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2012-07-31 08:16:22 -06:00
Sascha Hauer
0c2498f166 pwm: Add PWM framework support
This patch adds framework support for PWM (pulse width modulation) devices.

The is a barebone PWM API already in the kernel under include/linux/pwm.h,
but it does not allow for multiple drivers as each of them implements the
pwm_*() functions.

There are other PWM framework patches around from Bill Gatliff. Unlike
his framework this one does not change the existing API for PWMs so that
this framework can act as a drop in replacement for the existing API.

Why another framework?

Several people argue that there should not be another framework for PWMs
but they should be integrated into one of the existing frameworks like led
or hwmon. Unlike these frameworks the PWM framework is agnostic to the
purpose of the PWM. In fact, a PWM can drive a LED, but this makes the
LED framework a user of a PWM, like already done in leds-pwm.c. The gpio
framework also is not suitable for PWMs. Every gpio could be turned into
a PWM using timer based toggling, but on the other hand not every PWM hardware
device can be turned into a gpio due to the lack of hardware capabilities.

This patch does not try to improve the PWM API yet, this could be done in
subsequent patches.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
[thierry.reding@avionic-design.de: fixup typos, kerneldoc comments]
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-06-15 12:56:50 +02:00
Linus Torvalds
fb09bafda6 Staging tree pull request for 3.5-rc1
Here is the big staging tree pull request for the 3.5-rc1 merge window.
 
 Loads of changes here, and we just narrowly added more lines than we
 added:
  622 files changed, 28356 insertions(+), 26059 deletions(-)
 
 But, good news is that there is a number of subsystems that moved out of
 the staging tree, to their respective "real" portions of the kernel.
 
 Code that moved out was:
 	- iio core code
 	- mei driver
 	- vme core and bridge drivers
 
 There was one broken network driver that moved into staging as a step
 before it is removed from the tree (pc300), and there was a few new
 drivers added to the tree:
 	- new iio drivers
 	- gdm72xx wimax USB driver
 	- ipack subsystem and 2 drivers
 
 All of the movements around have acks from the various subsystem
 maintainers, and all of this has been in the linux-next tree for a
 while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk+7q8MACgkQMUfUDdst+ymjogCguo8fANFVlPWeZGeoBTL+aQfQ
 yTkAoLE0codmh+2SvhulYgyU1Wh6ZDK2
 =nJ2F
 -----END PGP SIGNATURE-----

Merge tag 'staging-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging tree changes from Greg Kroah-Hartman:
 "Here is the big staging tree pull request for the 3.5-rc1 merge
  window.

  Loads of changes here, and we just narrowly added more lines than we
  added:
   622 files changed, 28356 insertions(+), 26059 deletions(-)

  But, good news is that there is a number of subsystems that moved out
  of the staging tree, to their respective "real" portions of the
  kernel.

  Code that moved out was:
	- iio core code
	- mei driver
	- vme core and bridge drivers

  There was one broken network driver that moved into staging as a step
  before it is removed from the tree (pc300), and there was a few new
  drivers added to the tree:
	- new iio drivers
	- gdm72xx wimax USB driver
	- ipack subsystem and 2 drivers

  All of the movements around have acks from the various subsystem
  maintainers, and all of this has been in the linux-next tree for a
  while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed up various trivial conflicts, along with a non-trivial one found
in -next and pointed out by Olof Johanssen: a clean - but incorrect -
merge of the arch/arm/boot/dts/at91sam9g20.dtsi file.  Fix up manually
as per Stephen Rothwell.

* tag 'staging-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (536 commits)
  Staging: bcm: Remove two unused variables from Adapter.h
  Staging: bcm: Removes the volatile type definition from Adapter.h
  Staging: bcm: Rename all "INT" to "int" in Adapter.h
  Staging: bcm: Fix warning: __packed vs. __attribute__((packed)) in Adapter.h
  Staging: bcm: Correctly format all comments in Adapter.h
  Staging: bcm: Fix all whitespace issues in Adapter.h
  Staging: bcm: Properly format braces in Adapter.h
  Staging: ipack/bridges/tpci200: remove unneeded casts
  Staging: ipack/bridges/tpci200: remove TPCI200_SHORTNAME constant
  Staging: ipack: remove board_name and bus_name fields from struct ipack_device
  Staging: ipack: improve the register of a bus and a device in the bus.
  staging: comedi: cleanup all the comedi_driver 'detach' functions
  staging: comedi: remove all 'default N' in Kconfig
  staging: line6/config.h: Delete unused header
  staging: gdm72xx depends on NET
  staging: gdm72xx: Set up parent link in sysfs for gdm72xx devices
  staging: drm/omap: initial dmabuf/prime import support
  staging: drm/omap: dmabuf/prime mmap support
  pstore/ram: Add ECC support
  pstore/ram: Switch to persistent_ram routines
  ...
2012-05-22 16:34:21 -07:00
Aneesh V
7ec944538d memory: emif: add basic infrastructure for EMIF driver
EMIF is an SDRAM controller used in various Texas Instruments
SoCs. EMIF supports, based on its revision, one or more of
LPDDR2/DDR2/DDR3 protocols.

Add the basic infrastructure for EMIF driver that includes
driver registration, probe, parsing of platform data etc.

Signed-off-by: Aneesh V <aneesh@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Benoit Cousson <b-cousson@ti.com>
[santosh.shilimkar@ti.com: Moved to drivers/memory from drivers/misc]
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-02 00:10:49 -07:00
Greg Kroah-Hartman
db3b9e990e Staging: VME: move VME drivers out of staging
This moves the VME core, VME board drivers, and VME bridge drivers out
of the drivers/staging/vme/ area to drivers/vme/.

The VME device drivers have not moved out yet due to some API questions
they are still working through, that should happen soon, hopefully.

Cc: Martyn Welch <martyn.welch@ge.com>
Cc: Manohar Vanga <manohar.vanga@cern.ch>
Cc: Vincent Bossier <vincent.bossier@gmail.com>
Cc: "Emilio G. Cota" <cota@braap.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-26 12:34:58 -07:00
Jonathan Cameron
a980e04609 IIO: Move the core files to drivers/iio
Take the core support + the kfifo buffer implentation out of
staging.  Whilst we are far from done in improving this subsystem
it is now at a stage where the userspae interfaces (provided by
the core) can be considered stable.

Drivers will follow over a longer time scale.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 11:11:38 -07:00
MyungJoo Ham
de55d8716a Extcon (external connector): import Android's switch class and modify.
External connector class (extcon) is based on and an extension of
Android kernel's switch class located at linux/drivers/switch/.

This patch provides the before-extension switch class moved to the
location where the extcon will be located (linux/drivers/extcon/) and
updates to handle class properly.

The before-extension class, switch class of Android kernel, commits
imported are:

switch: switch class and GPIO drivers. (splitted)
Author: Mike Lockwood <lockwood@android.com>

switch: Use device_create instead of device_create_drvdata.
Author: Arve Hjønnevåg <arve@android.com>

In this patch, upon the commits of Android kernel, we have added:
- Relocated and renamed for extcon.
- Comments, module name, and author information are updated
- Code clean for successing patches
- Bugfix: enabling write access without write functions
- Class/device/sysfs create/remove handling
- Added comments about uevents
- Format changes for extcon_dev_register() to have a parent dev.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

--
Changes from v7
- Compiler error fixed when it is compiled as a module.
- Removed out-of-date Kconfig entry

Changes from v6
- Updated comment/strings
- Revised "Android-compatible" mode.
   * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH
   * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/*

Changes from v5
- Split the patch
- Style fixes
- "Android-compatible" mode is enabled by Kconfig option.

Changes from v2
- Updated name_show
- Sysfs entries are handled by class itself.
- Updated the method to add/remove devices for the class
- Comments on uevent send
- Able to become a module
- Compatible with Android platform

Changes from RFC
- Renamed to extcon (external connector) from multistate switch
- Added a seperated directory (drivers/extcon)
- Added kerneldoc comments
- Removed unused variables from extcon_gpio.c
- Added ABI Documentation.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 09:21:11 -07:00
Linus Torvalds
b1a808ff43 Merge branch 'for-next' of git://gitorious.org/kernel-hsi/kernel-hsi
Pull HSI (High Speed Synchronous Serial Interface) framework from Carlos Chinea:
 "The High Speed Synchronous Serial Interface (HSI) is a serial
  interface mainly used for connecting application engines (APE) with
  cellular modem engines (CMT) in cellular handsets.

  The framework is currently being used for some people and we would
  like to see it integrated into the kernel for 3.3.  There is no HW
  controller drivers in this pull, but some people have already some of
  them pending which they would like to push as soon as this integrated.
  I am also working on the acceptance for an TI OMAP one, based on a
  compatible legacy version of the interface called SSI."

Ok, so it didn't get into 3.3, but here it is pulled into 3.4.

Several people piped up to say "yeah, we want this".

* 'for-next' of git://gitorious.org/kernel-hsi/kernel-hsi:
  HSI: hsi_char: Update ioctl-number.txt
  HSI: Add HSI API documentation
  HSI: hsi_char: Add HSI char device kernel configuration
  HSI: hsi_char: Add HSI char device driver
  HSI: hsi: Introducing HSI framework
2012-04-02 09:50:40 -07:00
Linus Torvalds
46b407ca4a remoteproc/rpmsg: new subsystem
This new subsystem provides a common way to talk to secondary processors
 on an SoC, e.g. a DSP, GPU or service processor, using virtio as the
 transport. In the long run, it should replace a few dozen vendor
 specific ways to do the same thing, which all never made it into the
 upstream kernel. There is a broad agreement that rpmsg is the way to
 go here and several vendors have started working on replacing their
 own subsystems.
 
 Two branches each add one virtio protocol number. Fortunately the
 numbers were agreed upon in advance, so there are only context changes.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUAT24/OmCrR//JCVInAQJmfQ/+NklCaFIHX5Mbi1ZdeekT1p8l7OVXs1zU
 ygJA86Vlbz3dL7t08HcAqS+C3tGE4iTGp9IJrBQBjZdCuPJujyB+xAYFNU39TZzH
 osdiSSQZapkIzMcviCqQPO70bzUPWtskXmVNmrKiHOM7HLHMWRWUqtfj2wNqqeIa
 l+mCC3q9ZV4JJ9puzW9UMRZKsSUYNJ9q/MfAbBHXJawhKtZWpT5Luwa8s2KTFfz3
 XY6iW+FfY6d6+jU3p9AGxZqT02V9H/mOqP9dyM6wK6BfHrISFYIkN+KAzhMkxY+Z
 p7folq/WipN9XoizWql7QKAa4wKMyhRNmScfCfSdKhSOzWzWMiu9ySLUqx/KEJq7
 OknCtnHNhAp/hcR39f2Nv6mLNxA01WeUvaPTzzjTotpwCEcbcZpsGT/OBN/vZyZ5
 ZAqZlEg/D65ZIU2dESx2U2XMiGTBc7AAgfLj0PjmhsMH3bVlG3IHcnGH6wqwGpvH
 zglaCy67/htEW6jMFjhqginXssPtcaFGz56g+/WkEyvYCJTwdMAiXc05uZS/EeZT
 uF8Vpg3cEFDJUtGrcA9FSKZ/2f6pLKvHY7yYRGwhR7pajQl7I0WDwgCQmy4pE6Ao
 l9MNeoPKQyFmuVhZbQP4QLRRGDD6Hm+qbPRqaRJI2DuM2g8v6Yk3ydd8EOgHm+O3
 n1W0zBfQ2l4=
 =SC55
 -----END PGP SIGNATURE-----

Merge tag 'rpmsg' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "remoteproc/rpmsg: new subsystem" from Arnd Bergmann:
 "This new subsystem provides a common way to talk to secondary
  processors on an SoC, e.g.  a DSP, GPU or service processor, using
  virtio as the transport.  In the long run, it should replace a few
  dozen vendor specific ways to do the same thing, which all never made
  it into the upstream kernel.  There is a broad agreement that rpmsg is
  the way to go here and several vendors have started working on
  replacing their own subsystems.

  Two branches each add one virtio protocol number.  Fortunately the
  numbers were agreed upon in advance, so there are only context
  changes.

  Signed-off-by: Arnd Bergmann <arnd@arndb.de>"

Fixed up trivial protocol number conflict due to the mentioned additions
next to each other.

* tag 'rpmsg' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits)
  remoteproc: cleanup resource table parsing paths
  remoteproc: remove the hardcoded vring alignment
  remoteproc/omap: remove the mbox_callback limitation
  remoteproc: remove the single rpmsg vdev limitation
  remoteproc: safer boot/shutdown order
  remoteproc: remoteproc_rpmsg -> remoteproc_virtio
  remoteproc: resource table overhaul
  rpmsg: fix build warning when dma_addr_t is 64-bit
  rpmsg: fix published buffer length in rpmsg_recv_done
  rpmsg: validate incoming message length before propagating
  rpmsg: fix name service endpoint leak
  remoteproc/omap: two Kconfig fixes
  remoteproc: make sure we're parsing a 32bit firmware
  remoteproc: s/big switch/lookup table/
  remoteproc: bail out if firmware has different endianess
  remoteproc: don't use virtio's weak barriers
  rpmsg: rename virtqueue_add_buf_gfp to virtqueue_add_buf
  rpmsg: depend on EXPERIMENTAL
  remoteproc: depend on EXPERIMENTAL
  rpmsg: add Kconfig menu
  ...

Conflicts:
	include/linux/virtio_ids.h
2012-03-27 16:30:09 -07:00
Joe Perches
6222d7a177 telephony: Move to staging
This stuff is really old and in quite poor shape.
Does anyone still use it?

If not, I think it's appropriate to let it simmer
in staging for a few releases.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-08 16:58:04 -08:00
Ohad Ben-Cohen
bcabbccabf rpmsg: add virtio-based remote processor messaging bus
Add a virtio-based inter-processor communication bus, which enables
kernel drivers to communicate with entities, running on remote
processors, over shared memory using a simple messaging protocol.

Every pair of AMP processors share two vrings, which are used to send
and receive the messages over shared memory.

The header of every message sent on the rpmsg bus contains src and dst
addresses, which make it possible to multiplex several rpmsg channels on
the same vring.

Every rpmsg channel is a device on this bus. When a channel is added,
and an appropriate rpmsg driver is found and probed, it is also assigned
a local rpmsg address, which is then bound to the driver's callback.

When inbound messages carry the local address of a bound driver,
its callback is invoked by the bus.

This patch provides a kernel interface only; user space interfaces
will be later exposed by kernel users of this rpmsg bus.

Designed with Brian Swetland <swetland@google.com>.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au> (virtio_ids.h)
Cc: Brian Swetland <swetland@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
2012-02-08 22:53:58 +02:00
Ohad Ben-Cohen
400e64df6b remoteproc: add framework for controlling remote processors
Modern SoCs typically employ a central symmetric multiprocessing (SMP)
application processor running Linux, with several other asymmetric
multiprocessing (AMP) heterogeneous processors running different instances
of operating system, whether Linux or any other flavor of real-time OS.

Booting a remote processor in an AMP configuration typically involves:
- Loading a firmware which contains the OS image
- Allocating and providing it required system resources (e.g. memory)
- Programming an IOMMU (when relevant)
- Powering on the device

This patch introduces a generic framework that allows drivers to do
that. In the future, this framework will also include runtime power
management and error recovery.

Based on (but now quite far from) work done by Fernando Guzman Lugo
<fernando.lugo@ti.com>.

ELF loader was written by Mark Grosen <mgrosen@ti.com>, based on
msm's Peripheral Image Loader (PIL) by Stephen Boyd <sboyd@codeaurora.org>.

Designed with Brian Swetland <swetland@google.com>.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Brian Swetland <swetland@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
2012-02-08 22:52:56 +02:00
Carlos Chinea
a056ab8c7a HSI: hsi: Introducing HSI framework
Adds HSI framework in to the linux kernel.

High Speed Synchronous Serial Interface (HSI) is a
serial interface mainly used for connecting application
engines (APE) with cellular modem engines (CMT) in cellular
handsets.

HSI provides multiplexing for up to 16 logical channels,
low-latency and full duplex communication.

Signed-off-by: Carlos Chinea <carlos.chinea@nokia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-05 15:42:13 +02:00
Bart Van Assche
a48b0c4c7d hv: Move Kconfig menu entry
Move the "Device Drivers/Microsoft Hyper-V guest support"
menu entry up such that it appears immediately below virtio
(KVM and lguest guest driver support) instead of after a
hypervisor driver menu entry.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26 17:05:33 -08:00
Linus Torvalds
aa77677e0a Merge branch 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1519 commits)
  staging: et131x: Remove redundant check and return statement
  staging: et131x: Mainly whitespace changes to appease checkpatch
  staging: et131x: Remove last of the forward declarations
  staging: et131x: Remove even more forward declarations
  staging: et131x: Remove yet more forward declarations
  staging: et131x: Remove more forward declarations
  staging: et131x: Remove forward declaration of et131x_adapter_setup
  staging: et131x: Remove some forward declarations
  staging: et131x: Remove unused rx_ring.recv_packet_pool
  staging: et131x: Remove call to find pci pm capability
  staging: et131x: Remove redundant et131x_reset_recv() call
  staging: et131x: Remove unused rx_ring.recv_buffer_pool
  Staging: bcm: Fix three initialization errors in InterfaceDld.c
  Staging: bcm: Fix coding style issues in InterfaceDld.c
  staging:iio:dac: Add AD5360 driver
  staging:iio:trigger:bfin-timer: Fix compile error
  Staging: vt6655: add some range checks before memcpy()
  Staging: vt6655: whitespace fixes to iotcl.c
  Staging: vt6656: add some range checks before memcpy()
  Staging: vt6656: whitespace cleanups in ioctl.c
  ...

Fix up conflicts in:
 - drivers/{Kconfig,Makefile}, drivers/staging/{Kconfig,Makefile}:
	vg driver movement
 - drivers/staging/brcm80211/brcmfmac/{dhd_linux.c,mac80211_if.c}:
	driver removal vs now stale changes
 - drivers/staging/rtl8192e/r8192E_core.c:
	driver removal vs now stale changes
 - drivers/staging/et131x/et131*:
	driver consolidation into one file, tried to do fixups
2011-10-26 15:39:02 +02:00
Linus Torvalds
7e0bb71e75 Merge branch 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
* 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits)
  PM / Clocks: Remove redundant NULL checks before kfree()
  PM / Documentation: Update docs about suspend and CPU hotplug
  ACPI / PM: Add Sony VGN-FW21E to nonvs blacklist.
  ARM: mach-shmobile: sh7372 A4R support (v4)
  ARM: mach-shmobile: sh7372 A3SP support (v4)
  PM / Sleep: Mark devices involved in wakeup signaling during suspend
  PM / Hibernate: Improve performance of LZO/plain hibernation, checksum image
  PM / Hibernate: Do not initialize static and extern variables to 0
  PM / Freezer: Make fake_signal_wake_up() wake TASK_KILLABLE tasks too
  PM / Hibernate: Add resumedelay kernel param in addition to resumewait
  MAINTAINERS: Update linux-pm list address
  PM / ACPI: Blacklist Vaio VGN-FW520F machine known to require acpi_sleep=nonvs
  PM / ACPI: Blacklist Sony Vaio known to require acpi_sleep=nonvs
  PM / Hibernate: Add resumewait param to support MMC-like devices as resume file
  PM / Hibernate: Fix typo in a kerneldoc comment
  PM / Hibernate: Freeze kernel threads after preallocating memory
  PM: Update the policy on default wakeup settings
  PM / VT: Cleanup #if defined uglyness and fix compile error
  PM / Suspend: Off by one in pm_suspend()
  PM / Hibernate: Include storage keys in hibernation image on s390
  ...
2011-10-25 15:18:39 +02:00
Linus Walleij
2744e8afb3 drivers: create a pin control subsystem
This creates a subsystem for handling of pin control devices.
These are devices that control different aspects of package
pins.

Currently it handles pinmuxing, i.e. assigning electronic
functions to groups of pins on primarily PGA and BGA type of
chip packages which are common in embedded systems.

The plan is to also handle other I/O pin control aspects
such as biasing, driving, input properties such as
schmitt-triggering, load capacitance etc within this
subsystem, to remove a lot of ARM arch code as well as
feature-creepy GPIO drivers which are implementing the same
thing over and over again.

This is being done to depopulate the arch/arm/* directory
of such custom drivers and try to abstract the infrastructure
they all need. See the Documentation/pinctrl.txt file that is
part of this patch for more details.

ChangeLog v1->v2:

- Various minor fixes from Joe's and Stephens review comments
- Added a pinmux_config() that can invoke custom configuration
  with arbitrary data passed in or out to/from the pinmux driver

ChangeLog v2->v3:

- Renamed subsystem folder to "pinctrl" since we will likely
  want to keep other pin control such as biasing in this
  subsystem too, so let us keep to something generic even though
  we're mainly doing pinmux now.
- As a consequence, register pins as an abstract entity separate
  from the pinmux. The muxing functions will claim pins out of the
  pin pool and make sure they do not collide. Pins can now be
  named by the pinctrl core.
- Converted the pin lookup from a static array into a radix tree,
  I agreed with Grant Likely to try to avoid any static allocation
  (which is crap for device tree stuff) so I just rewrote this
  to be dynamic, just like irq number descriptors. The
  platform-wide definition of number of pins goes away - this is
  now just the sum total of the pins registered to the subsystem.
- Make sure mappings with only a function name and no device
  works properly.

ChangeLog v3->v4:

- Define a number space per controller instead of globally,
  Stephen and Grant requested the same thing so now maps need to
  define target controller, and the radix tree of pin descriptors
  is a property on each pin controller device.
- Add a compulsory pinctrl device entry to the pinctrl mapping
  table. This must match the pinctrl device, like "pinctrl.0"
- Split the file core.c in two: core.c and pinmux.c where the
  latter carry all pinmux stuff, the core is for generic pin
  control, and use local headers to access functionality between
  files. It is now possible to implement a "blank" pin controller
  without pinmux capabilities. This split will make new additions
  like pindrive.c, pinbias.c etc possible for combined drivers
  and chunks of functionality which is a GoodThing(TM).
- Rewrite the interaction with the GPIO subsystem - the pin
  controller descriptor now handles this by defining an offset
  into the GPIO numberspace for its handled pin range. This is
  used to look up the apropriate pin controller for a GPIO pin.
  Then that specific GPIO range is matched 1-1 for the target
  controller instance.
- Fixed a number of review comments from Joe Perches.
- Broke out a header file pinctrl.h for the core pin handling
  stuff that will be reused by other stuff than pinmux.
- Fixed some erroneous EXPORT() stuff.
- Remove mispatched U300 Kconfig and Makefile entries
- Fixed a number of review comments from Stephen Warren, not all
  of them - still WIP. But I think the new mapping that will
  specify which function goes to which pin mux controller address
  50% of your concerns (else beat me up).

ChangeLog v4->v5:

- Defined a "position" for each function, so the pin controller now
  tracks a function in a certain position, and the pinmux maps define
  what position you want the function in. (Feedback from Stephen
  Warren and Sascha Hauer).
- Since we now need to request a combined function+position from
  the machine mapping table that connect mux settings to drivers,
  it was extended with a position field and a name field. The
  name field is now used if you e.g. need to switch between two
  mux map settings at runtime.
- Switched from a class device to using struct bus_type for this
  subsystem. Verified sysfs functionality: seems to work fine.
  (Feedback from Arnd Bergmann and Greg Kroah-Hartman)
- Define a per pincontroller list of GPIO ranges from the GPIO
  pin space that can be handled by the pin controller. These can
  be added one by one at runtime. (Feedback from Barry Song)
- Expanded documentation of regulator_[get|enable|disable|put]
  semantics.
- Fixed a number of review comments from Barry Song. (Thanks!)

ChangeLog v5->v6:

- Create an abstract pin group concept that can sort pins into
  named and enumerated groups no matter what the use of these
  groups may be, one possible usecase is a group of pins being
  muxed in or so. The intention is however to also use these
  groups for other pin control activities.
- Make it compulsory for pinmux functions to associate with
  at least one group, so the abstract pin group concept is used
  to define the groups of pins affected by a pinmux function.
  The pinmux driver interface has been altered so as to enforce
  a function to list applicable groups per function.
- Provide an optional .group entry in the pinmux machine map
  so the map can select beteween different available groups
  to be used with a certain function.
- Consequent changes all over the place so that e.g. debugfs
  present reasonable information about the world.
- Drop the per-pin mux (*config) function in the pinmux_ops
  struct - I was afraid that this would start to be used for
  things totally unrelated to muxing, we can introduce that to
  the generic struct pinctrl_ops if needed. I want to keep
  muxing orthogonal to other pin control subjects and not mix
  these things up.

ChangeLog v6->v7:

- Make it possible to have several map entries matching the
  same device, pin controller and function, but using
  a different group, and alter the semantics so that
  pinmux_get() will pick all matching map entries, and
  store the associated groups in a list. The list will
  then be iterated over at pinmux_enable()/pinmux_disable()
  and corresponding driver functions called for each
  defined group. Notice that you're only allowed to map
  multiple *groups* to the same
  { device, pin controller, function } triplet, attempts
  to map the same device to multiple pin controllers will
  for example fail. This is hopefully the crucial feature
  requested by Stephen Warren.
- Add a pinmux hogging field to the pinmux mapping entries,
  and enable the pinmux core to hog pinmux map entries.
  This currently only works for pinmuxes without assigned
  devices as it looks now, but with device trees we can
  look up the corresponding struct device * entries when
  we register the pinmux driver, and have it hog each
  pinmux map in turn, for a simple approach to
  non-dynamic pin muxing. This addresses an issue from
  Grant Likely that the machine should take care of as
  much of the pinmux setup as possible, not the devices.
  By supplying a list of hogs, it can now instruct the
  core to take care of any static mappings.
- Switch pinmux group retrieveal function to grab an
  array of strings representing the groups rather than an
  array of unsigned and rewrite accordingly.
- Alter debugfs to show the grouplist handled by each
  pinmux. Also add a list of hogs.
- Dynamically allocate a struct pinmux at pinmux_get() and
  free it at pinmux_put(), then add these to the global
  list of pinmuxes active as we go along.
- Go over the list of pinmux maps at pinmux_get() time
  and repeatedly apply matches.
- Retrieve applicable groups per function from the driver
  as a string array rather than a unsigned array, then
  lookup the enumerators.
- Make the device to pinmux map a singleton - only allow the
  mapping table to be registered once and even tag the
  registration function with __init so it surely won't be
  abused.
- Create a separate debugfs file to view the pinmux map at
  runtime.
- Introduce a spin lock to the pin descriptor struct, lock it
  when modifying pin status entries. Reported by Stijn Devriendt.
- Fix up the documentation after review from Stephen Warren.
- Let the GPIO ranges give names as const char * instead of some
  fixed-length string.
- add a function to unregister GPIO ranges to mirror the
  registration function.
- Privatized the struct pinctrl_device and removed it from the
  <linux/pinctrl/pinctrl.h> API, the drivers do not need to know
  the members of this struct. It is now in the local header
  "core.h".
- Rename the concept of "anonymous" mux maps to "system" muxes
  and add convenience macros and documentation.

ChangeLog v7->v8:

- Delete the leftover pinmux_config() function from the
 <linux/pinctrl/pinmux.h> header.
- Fix a race condition found by Stijn Devriendt in pin_request()

ChangeLog v8->v9:

- Drop the bus_type and the sysfs attributes and all, we're not on
  the clear about how this should be used for e.g. userspace
  interfaces so let us save this for the future.
- Use the right name in MAINTAINERS, PIN CONTROL rather than
  PINMUX
- Don't kfree() the device state holder, let the .remove() callback
  handle this.
- Fix up numerous kerneldoc headers to have one line for the function
  description and more verbose documentation below the parameters

ChangeLog v9->v10:
- pinctrl: EXPORT_SYMBOL needs export.h, folded in a patch
  from Steven Rothwell
- fix pinctrl_register error handling, folded in a patch from
  Axel Lin
- Various fixes to documentation text so that it's consistent.
- Removed pointless comment from drivers/Kconfig
- Removed dependency on SYSFS since we removed the bus in
  v9.
- Renamed hopelessly abbreviated pctldev_* functions to the
  more verbose pinctrl_dev_*
- Drop mutex properly when looking up GPIO ranges
- Return NULL instead of ERR_PTR() errors on registration of
  pin controllers, using cast pointers is fragile. We can
  live without the detailed error codes for sure.

Cc: Stijn Devriendt <highguy@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-10-13 12:49:17 +02:00
Greg Kroah-Hartman
46a9719136 Staging: hv: move hyperv code out of staging directory
After many years wandering the desert, it is finally time for the
Microsoft HyperV code to move out of the staging directory.  Or at least
the core hyperv bus code, and the utility driver, the rest still have
some review to get through by the various subsystem maintainers.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
2011-10-10 22:52:55 -06:00
MyungJoo Ham
a3c98b8b2e PM: Introduce devfreq: generic DVFS framework with device-specific OPPs
With OPPs, a device may have multiple operable frequency and voltage
sets. However, there can be multiple possible operable sets and a system
will need to choose one from them. In order to reduce the power
consumption (by reducing frequency and voltage) without affecting the
performance too much, a Dynamic Voltage and Frequency Scaling (DVFS)
scheme may be used.

This patch introduces the DVFS capability to non-CPU devices with OPPs.
DVFS is a techique whereby the frequency and supplied voltage of a
device is adjusted on-the-fly. DVFS usually sets the frequency as low
as possible with given conditions (such as QoS assurance) and adjusts
voltage according to the chosen frequency in order to reduce power
consumption and heat dissipation.

The generic DVFS for devices, devfreq, may appear quite similar with
/drivers/cpufreq.  However, cpufreq does not allow to have multiple
devices registered and is not suitable to have multiple heterogenous
devices with different (but simple) governors.

Normally, DVFS mechanism controls frequency based on the demand for
the device, and then, chooses voltage based on the chosen frequency.
devfreq also controls the frequency based on the governor's frequency
recommendation and let OPP pick up the pair of frequency and voltage
based on the recommended frequency. Then, the chosen OPP is passed to
device driver's "target" callback.

When PM QoS is going to be used with the devfreq device, the device
driver should enable OPPs that are appropriate with the current PM QoS
requests. In order to do so, the device driver may call opp_enable and
opp_disable at the notifier callback of PM QoS so that PM QoS's
update_target() call enables the appropriate OPPs. Note that at least
one of OPPs should be enabled at any time; be careful when there is a
transition.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Mike Turquette <mturquette@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-02 00:19:15 +02:00
Linus Torvalds
184475029a Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (99 commits)
  drivers/virt: add missing linux/interrupt.h to fsl_hypervisor.c
  powerpc/85xx: fix mpic configuration in CAMP mode
  powerpc: Copy back TIF flags on return from softirq stack
  powerpc/64: Make server perfmon only built on ppc64 server devices
  powerpc/pseries: Fix hvc_vio.c build due to recent changes
  powerpc: Exporting boot_cpuid_phys
  powerpc: Add CFAR to oops output
  hvc_console: Add kdb support
  powerpc/pseries: Fix hvterm_raw_get_chars to accept < 16 chars, fixing xmon
  powerpc/irq: Quieten irq mapping printks
  powerpc: Enable lockup and hung task detectors in pseries and ppc64 defeconfigs
  powerpc: Add mpt2sas driver to pseries and ppc64 defconfig
  powerpc: Disable IRQs off tracer in ppc64 defconfig
  powerpc: Sync pseries and ppc64 defconfigs
  powerpc/pseries/hvconsole: Fix dropped console output
  hvc_console: Improve tty/console put_chars handling
  powerpc/kdump: Fix timeout in crash_kexec_wait_realmode
  powerpc/mm: Fix output of total_ram.
  powerpc/cpufreq: Add cpufreq driver for Momentum Maple boards
  powerpc: Correct annotations of pmu registration functions
  ...

Fix up trivial Kconfig/Makefile conflicts in arch/powerpc, drivers, and
drivers/cpufreq
2011-07-25 22:59:39 -07:00
Ohad Ben-Cohen
e72542191c virtio: expose for non-virtualization users too
virtio has been so far used only in the context of virtualization,
and the virtio Kconfig was sourced directly by the relevant arch
Kconfigs when VIRTUALIZATION was selected.

Now that we start using virtio for inter-processor communications,
we need to source the virtio Kconfig outside of the virtualization
scope too.

Moreover, some architectures might use virtio for both virtualization
and inter-processor communications, so directly sourcing virtio
might yield unexpected results due to conflicting selections.

The simple solution offered by this patch is to always source virtio's
Kconfig in drivers/Kconfig, and remove it from the appropriate arch
Kconfigs. Additionally, a virtio menu entry has been added so virtio
drivers don't show up in the general drivers menu.

This way anyone can use virtio, though it's arguably less accessible
(and neat!) for virtualization users now.

Note: some architectures (mips and sh) seem to have a VIRTUALIZATION
menu merely for sourcing virtio's Kconfig, so that menu is removed too.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-07-23 16:20:30 +09:30