There is no point in allocating memory for a synchronous flush.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Always use the bio_set_dev helper to assign ->bi_bdev to make sure
other state related to the device is uptodate.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the gendisk pointer in struct bio with a pointer to the newly
improved struct block device. From that the gendisk can be trivially
accessed with an extra indirection, but it also allows to directly
look up all information related to partition remapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unconditionally call set_disk_ro now that it only updates the hardware
state. This allows to properly set up the Linux devices read-only when
the controller turns a previously writable namespace read-only.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Properly unwind step by step using refactored helpers from nvme_unmap_data
to avoid a potential double dma_unmap on a mapping failure.
Fixes: 7fe07d14f7 ("nvme-pci: merge nvme_free_iod into nvme_unmap_data")
Reported-by: Marc Orr <marcorr@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Marc Orr <marcorr@google.com>
Split out three helpers from nvme_unmap_data that will allow finer grained
unwinding from nvme_map_data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Marc Orr <marcorr@google.com>
The function nvmet_execute_identify_ns() doesn't set the status if call
to nvmet_find_namespace() fails. In that case we set the status of the
request to the value return by the nvmet_copy_sgl().
Set the status to NVME_SC_INVALID_NS and adjust the code such that
request will have the right status on nvmet_find_namespace() failure.
Without this patch :-
NVME Identify Namespace 3:
nsze : 0
ncap : 0
nuse : 0
nsfeat : 0
nlbaf : 0
flbas : 0
mc : 0
dpc : 0
dps : 0
nmic : 0
rescap : 0
fpi : 0
dlfeat : 0
nawun : 0
nawupf : 0
nacwu : 0
nabsn : 0
nabo : 0
nabspf : 0
noiob : 0
nvmcap : 0
mssrl : 0
mcl : 0
msrc : 0
nsattr : 0
nvmsetid: 0
anagrpid: 0
endgid : 0
nguid : 00000000000000000000000000000000
eui64 : 0000000000000000
lbaf 0 : ms:0 lbads:0 rp:0 (in use)
With this patch-series :-
feb3b88b501e (HEAD -> nvme-5.11) nvmet: remove extra variable in identify ns
6302aa67210a nvmet: remove extra variable in id-desclist
ed57951da453 nvmet: remove extra variable in smart log nsid
be384b8c24dc nvmet: set right status on error in id-ns handler
NVMe status: INVALID_NS: The namespace or the format of that namespace is invalid(0xb)
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Since NVMe v1.4 the Controller Memory Buffer must be explicitly enabled
by the host.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
[hch: avoid a local variable and add a comment]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Each name space has a request queue, if complete request long time,
multi request queues may have time out requests at the same time,
nvme_tcp_timeout will execute concurrently. Multi requests in different
request queues may be queued in the same tcp queue, multi
nvme_tcp_timeout may call nvme_tcp_stop_queue at the same time.
The first nvme_tcp_stop_queue will clear NVME_TCP_Q_LIVE and continue
stopping the tcp queue(cancel io_work), but the others check
NVME_TCP_Q_LIVE is already cleared, and then directly complete the
requests, complete request before the io work is completely canceled may
lead to a use-after-free condition.
Add a multex lock to serialize nvme_tcp_stop_queue.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
A crash happens when inject completing request long time(nearly 30s).
Each name space has a request queue, when inject completing request long
time, multi request queues may have time out requests at the same time,
nvme_rdma_timeout will execute concurrently. Multi requests in different
request queues may be queued in the same rdma queue, multi
nvme_rdma_timeout may call nvme_rdma_stop_queue at the same time.
The first nvme_rdma_timeout will clear NVME_RDMA_Q_LIVE and continue
stopping the rdma queue(drain qp), but the others check NVME_RDMA_Q_LIVE
is already cleared, and then directly complete the requests, complete
request before the qp is fully drained may lead to a use-after-free
condition.
Add a multex lock to serialize nvme_rdma_stop_queue.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Tested-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
According to NVMe spec v1.4, section 8.3.1, the PRINFO bit and
the metadata size play a vital role in deteriming the host buffer size.
If PRIFNO bit is set and MS==8, the host doesn't add the metadata buffer,
instead the controller adds it.
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Discovery controllers usually don't support smart log page command.
So when we connect to the discovery controller we see this warning:
nvme nvme0: Failed to read smart log (error 24577)
nvme nvme0: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 192.168.123.1:8009
nvme nvme0: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery"
Introduce a new helper to understand if the controller is a discovery
controller and use this helper to skip nvme_init_hwmon (also use it in
other places that we check if the controller is a discovery controller).
Fixes: 400b6a7b13 ("nvme: Add hardware monitoring support")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When a bio merges, we can get a request that spans multiple
bios, and the overall request payload size is the sum of
all bios. When we calculate how much we need to send
from the existing bio (and bvec), we did not take into
account the iov_iter byte count cap.
Since multipage bvecs support, bvecs can split in the middle
which means that when we account for the last bvec send we
should also take the iov_iter byte count cap as it might be
lower than the last bvec size.
Reported-by: Hao Wang <pkuwangh@gmail.com>
Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Tested-by: Hao Wang <pkuwangh@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We shouldn't call smp_processor_id() in a preemptible
context, but this is advisory at best, so instead
call __smp_processor_id().
Fixes: db5ad6b7f8 ("nvme-tcp: try to send request in queue_rq context")
Reported-by: Or Gerlitz <gerlitz.or@gmail.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When setting port traddr to INADDR_ANY, the listening cm_id->device
is NULL. The associate IB device is known only when a connect request
event arrives, so checking T10-PI device capability should be done
at this stage.
Fixes: b09160c399 ("nvmet-rdma: add metadata/T10-PI support")
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The only used argument in this function is the "req".
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When a queue is in NVMET_RDMA_Q_CONNECTING state, it may has some
requests at rsp_wait_list. In case a disconnect occurs at this
state, no one will empty this list and will return the requests to
free_rsps list. Normally nvmet_rdma_queue_established() free those
requests after moving the queue to NVMET_RDMA_Q_LIVE state, but in
this case __nvmet_rdma_queue_disconnect() is called before. The
crash happens at nvmet_rdma_free_rsps() when calling
list_del(&rsp->free_list), because the request exists only at
the wait list. To fix the issue, simply clear rsp_wait_list when
destroying the queue.
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There are no callers for nvme_reset_ctrl_sync() and
nvme_alloc_request_qid() so that we keep the symbols exported.
Unexport those functions, mark them static and update the header file
respectively.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
While handling the completion queue, keep a local copy of the command id
from the DMA-accessible completion entry. This silences a time-of-check
to time-of-use (TOCTOU) warning from KF/x[1], with respect to a
Thunderclap[2] vulnerability analysis. The double-read impact appears
benign.
There may be a theoretical window for @command_id to be used as an
adversary-controlled array-index-value for mounting a speculative
execution attack, but that mitigation is saved for a potential follow-on.
A man-in-the-middle attack on the data payload is out of scope for this
analysis and is hopefully mitigated by filesystem integrity mechanisms.
[1] https://github.com/intel/kernel-fuzzer-for-xen-project
[2] http://thunderclap.io/thunderclap-paper-ndss2019.pdf
Signed-off-by: Lalithambika Krishna Kumar <lalithambika.krishnakumar@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We may send a request (with or without its data) from two paths:
1. From our I/O context nvme_tcp_io_work which is triggered from:
- queue_rq
- r2t reception
- socket data_ready and write_space callbacks
2. Directly from queue_rq if the send_list is empty (because we want to
save the context switch associated with scheduling our io_work).
However, given that now we have the send_mutex, we may run into a race
condition where none of these contexts will send the pending payload to
the controller. Both io_work send path and queue_rq send path
opportunistically attempt to acquire the send_mutex however queue_rq only
attempts to send a single request, and if io_work context fails to
acquire the send_mutex it will complete without rescheduling itself.
The race can trigger with the following sequence:
1. queue_rq sends request (no incapsule data) and blocks
2. RX path receives r2t - prepares data PDU to send, adds h2cdata PDU
to the send_list and schedules io_work
3. io_work triggers and cannot acquire the send_mutex - because of (1),
ends without self rescheduling
4. queue_rq completes the send, and completes
==> no context will send the h2cdata - timeout.
Fix this by having queue_rq sending as much as it can from the send_list
such that if it still has any left, its because the socket buffer is
full and the socket write_space callback will trigger, thus guaranteeing
that a context will be scheduled to send the h2cdata PDU.
Fixes: db5ad6b7f8 ("nvme-tcp: try to send request in queue_rq context")
Reported-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reported-by: Samuel Jones <sjones@kalrayinc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
A system with more than one of these SSDs will only have one usable.
Hence the kernel fails to detect nvme devices due to duplicate cntlids.
[ 6.274554] nvme nvme1: Duplicate cntlid 33 with nvme0, rejecting
[ 6.274566] nvme nvme1: Removing after probe failure status: -22
Adding the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk to resolves the issue.
Signed-off-by: Gopal Tiwari <gtiwari@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Kernel robot had the following warnings:
>> fcloop.c:1506:6: warning: %x in format string (no. 1) requires
>> 'unsigned int *' but the argument type is 'signed int *'.
>> [invalidScanfArgType_int]
>> if (sscanf(buf, "%x:%d:%d", &opcode, &starting, &amount) != 3)
>> ^
Resolve by changing opcode from and int to an unsigned int
and
>> fcloop.c:1632:32: warning: Uninitialized variable: lport [uninitvar]
>> ret = __wait_localport_unreg(lport);
>> ^
>> fcloop.c:1615:28: warning: Uninitialized variable: nport [uninitvar]
>> ret = __remoteport_unreg(nport, rport);
>> ^
These aren't actual issues as the values are assigned prior to use.
It appears the tool doesn't understand list_first_entry_or_null().
Regardless, quiet the tool by initializing the pointers to NULL at
declaration.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Recent patches changed calling sequences. nvme_fc_abort_outstanding_ios
used to be called from a timeout or work context. Now it is being called
in an io completion context, which can be an interrupt handler.
Unfortunately, the abort outstanding ios routine attempts to stop nvme
queues and nested routines that may try to sleep, which is in conflict
with the interrupt handler.
Correct replacing the direct call with a work element scheduling, and the
abort outstanding ios routine will be called in the work element.
Fixes: 95ced8a2c7 ("nvme-fc: eliminate terminate_io use by nvme_fc_error_recovery")
Signed-off-by: James Smart <james.smart@broadcom.com>
Reported-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
A smaller set of patches, nothing stands out as being particularly major
this cycle:
- Driver bug fixes and updates: bnxt_re, cxgb4, rxe, hns, i40iw, cxgb4,
mlx4 and mlx5
- Bug fixes and polishing for the new rts ULP
- Cleanup of uverbs checking for allowed driver operations
- Use sysfs_emit all over the place
- Lots of bug fixes and clarity improvements for hns
- hip09 support for hns
- NDR and 50/100Gb signaling rates
- Remove dma_virt_ops and go back to using the IB DMA wrappers
- mlx5 optimizations for contiguous DMA regions
-----BEGIN PGP SIGNATURE-----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=9t8b
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A smaller set of patches, nothing stands out as being particularly
major this cycle. The biggest item would be the new HIP09 HW support
from HNS, otherwise it was pretty quiet for new work here:
- Driver bug fixes and updates: bnxt_re, cxgb4, rxe, hns, i40iw,
cxgb4, mlx4 and mlx5
- Bug fixes and polishing for the new rts ULP
- Cleanup of uverbs checking for allowed driver operations
- Use sysfs_emit all over the place
- Lots of bug fixes and clarity improvements for hns
- hip09 support for hns
- NDR and 50/100Gb signaling rates
- Remove dma_virt_ops and go back to using the IB DMA wrappers
- mlx5 optimizations for contiguous DMA regions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (147 commits)
RDMA/cma: Don't overwrite sgid_attr after device is released
RDMA/mlx5: Fix MR cache memory leak
RDMA/rxe: Use acquire/release for memory ordering
RDMA/hns: Simplify AEQE process for different types of queue
RDMA/hns: Fix inaccurate prints
RDMA/hns: Fix incorrect symbol types
RDMA/hns: Clear redundant variable initialization
RDMA/hns: Fix coding style issues
RDMA/hns: Remove unnecessary access right set during INIT2INIT
RDMA/hns: WARN_ON if get a reserved sl from users
RDMA/hns: Avoid filling sl in high 3 bits of vlan_id
RDMA/hns: Do shift on traffic class when using RoCEv2
RDMA/hns: Normalization the judgment of some features
RDMA/hns: Limit the length of data copied between kernel and userspace
RDMA/mlx4: Remove bogus dev_base_lock usage
RDMA/uverbs: Fix incorrect variable type
RDMA/core: Do not indicate device ready when device enablement fails
RDMA/core: Clean up cq pool mechanism
RDMA/core: Update kernel documentation for ib_create_named_qp()
MAINTAINERS: SOFT-ROCE: Change Zhu Yanjun's email address
...
-----BEGIN PGP SIGNATURE-----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=ayp2
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Nothing major in here:
- NVMe pull request from Christoph:
- nvmet passthrough improvements (Chaitanya Kulkarni)
- fcloop error injection support (James Smart)
- read-only support for zoned namespaces without Zone Append
(Javier González)
- improve some error message (Minwoo Im)
- reject I/O to offline fabrics namespaces (Victor Gladkov)
- PCI queue allocation cleanups (Niklas Schnelle)
- remove an unused allocation in nvmet (Amit Engel)
- a Kconfig spelling fix (Colin Ian King)
- nvme_req_qid simplication (Baolin Wang)
- MD pull request from Song:
- Fix race condition in md_ioctl() (Dae R. Jeong)
- Initialize read_slot properly for raid10 (Kevin Vigor)
- Code cleanup (Pankaj Gupta)
- md-cluster resync/reshape fix (Zhao Heming)
- Move null_blk into its own directory (Damien Le Moal)
- null_blk zone and discard improvements (Damien Le Moal)
- bcache race fix (Dongsheng Yang)
- Set of rnbd fixes/improvements (Gioh Kim, Guoqing Jiang, Jack Wang,
Lutz Pogrell, Md Haris Iqbal)
- lightnvm NULL pointer deref fix (tangzhenhao)
- sr in_interrupt() removal (Sebastian Andrzej Siewior)
- FC endpoint security support for s390/dasd (Jan Höppner, Sebastian
Ott, Vineeth Vijayan). From the s390 arch guys, arch bits included
as it made it easier for them to funnel the feature through the
block driver tree.
- Follow up fixes (Colin Ian King)"
* tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block: (64 commits)
block: drop dead assignments in loop_init()
sr: Remove in_interrupt() usage in sr_init_command().
sr: Switch the sector size back to 2048 if sr_read_sector() changed it.
cdrom: Reset sector_size back it is not 2048.
drivers/lightnvm: fix a null-ptr-deref bug in pblk-core.c
null_blk: Move driver into its own directory
null_blk: Allow controlling max_hw_sectors limit
null_blk: discard zones on reset
null_blk: cleanup discard handling
null_blk: Improve implicit zone close
null_blk: improve zone locking
block: Align max_hw_sectors to logical blocksize
null_blk: Fail zone append to conventional zones
null_blk: Fix zone size initialization
bcache: fix race between setting bdev state to none and new write request direct to backing
block/rnbd: fix a null pointer dereference on dev->blk_symlink_name
block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name
block/rnbd: call kobject_put in the failure path
Documentation/ABI/rnbd-srv: add document for force_close
block/rnbd-srv: close a mapped device from server side.
...
-----BEGIN PGP SIGNATURE-----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=zo4w
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Another series of killing more code than what is being added, again
thanks to Christoph's relentless cleanups and tech debt tackling.
This contains:
- blk-iocost improvements (Baolin Wang)
- part0 iostat fix (Jeffle Xu)
- Disable iopoll for split bios (Jeffle Xu)
- block tracepoint cleanups (Christoph Hellwig)
- Merging of struct block_device and hd_struct (Christoph Hellwig)
- Rework/cleanup of how block device sizes are updated (Christoph
Hellwig)
- Simplification of gendisk lookup and removal of block device
aliasing (Christoph Hellwig)
- Block device ioctl cleanups (Christoph Hellwig)
- Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig)
- Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig)
- sbitmap improvements (Pavel Begunkov)
- Hybrid polling fix (Pavel Begunkov)
- bvec iteration improvements (Pavel Begunkov)
- Zone revalidation fixes (Damien Le Moal)
- blk-throttle limit fix (Yu Kuai)
- Various little fixes"
* tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits)
blk-mq: fix msec comment from micro to milli seconds
blk-mq: update arg in comment of blk_mq_map_queue
blk-mq: add helper allocating tagset->tags
Revert "block: Fix a lockdep complaint triggered by request queue flushing"
nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class
blk-mq: add new API of blk_mq_hctx_set_fq_lock_class
block: disable iopoll for split bio
block: Improve blk_revalidate_disk_zones() checks
sbitmap: simplify wrap check
sbitmap: replace CAS with atomic and
sbitmap: remove swap_lock
sbitmap: optimise sbitmap_deferred_clear()
blk-mq: skip hybrid polling if iopoll doesn't spin
blk-iocost: Factor out the base vrate change into a separate function
blk-iocost: Factor out the active iocgs' state check into a separate function
blk-iocost: Move the usage ratio calculation to the correct place
blk-iocost: Remove unnecessary advance declaration
blk-iocost: Fix some typos in comments
blktrace: fix up a kerneldoc comment
block: remove the request_queue to argument request based tracepoints
...
Set nvme-loop's lock class via blk_mq_hctx_set_fq_lock_class for avoiding
lockdep possible recursive locking, then we can remove the dynamically
allocated lock class for each flush queue, finally we can avoid horrible
SCSI probe delay.
This way may not address situation in which one nvme-loop is backed on
another nvme-loop. However, in reality, people seldom uses this way
for test. Even though someone played in this way, it is just one
recursive locking false positive, no real deadlock issue.
Tested-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reported-by: Qian Cai <cai@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The request_queue can trivially be derived from the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use struct block_device to lookup partitions on a disk. This removes
all usage of struct hd_struct from the I/O path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allow ZNS NVMe SSDs to present a read-only namespace when append is not
supported, instead of rejecting the namespace directly.
This allows (i) the namespace to be used in read-only mode, which is not
a problem as the append command only affects the write path, and (ii) to
use standard management tools such as nvme-cli to choose a different
format or firmware slot that is compatible with the Linux zoned block
device.
Signed-off-by: Javier González <javier.gonz@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remane block device operations in preparation to add char device file
operations.
Signed-off-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Rename controller base dev_t char device in preparation for adding a
namespace char device.
Signed-off-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cleanup unnecessary ret values that are not checked or used in
nvme_alloc_ns().
Signed-off-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
During the scan_work, an Identify command is issued to figure out which
namespaces are active. If this command fails, the nvme driver falls back
to scanning namespaces sequentially. In this situation, we don't see
any warnings and don't even know whether list-ns command has been failed
or not easiliy.
Printa warning when the Identify command executin fail:
[ 1.108399] nvme nvme0: Identify NS List failed (status=0x400b)
[ 1.109583] nvme0n1: detected capacity change from 0 to 1048576
[ 1.112186] nvme nvme0: Identify Descriptors failed (nsid=2, status=0x4002)
[ 1.113929] nvme nvme0: Identify Descriptors failed (nsid=3, status=0x4002)
[ 1.116537] nvme nvme0: Identify Descriptors failed (nsid=4, status=0x4002)
...
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add the namespace ID to the error message when the Identify command used
to retrieve the Namespace Identification Descriptor list fails.
This avoids rather useless and duplicative messages like the following:
[ 1.321031] nvme nvme0: Identify Descriptors failed (16386)
[ 1.321948] nvme nvme0: Identify Descriptors failed (16386)
[ 1.322872] nvme nvme0: Identify Descriptors failed (16386)
[ 1.323775] nvme nvme0: Identify Descriptors failed (16386)
[ 1.324687] nvme nvme0: Identify Descriptors failed (16386)
...
Also, print the nvme status code in hexadecimal rather than decimal
format rather for better readability.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Commands get stuck while Host NVMe-oF controller is in reconnect state.
The controller enters into reconnect state when it loses connection with
the target. It tries to reconnect every 10 seconds (default) until
a successful reconnect or until the reconnect time-out is reached.
The default reconnect time out is 10 minutes.
Applications are expecting commands to complete with success or error
within a certain timeout (30 seconds by default). The NVMe host is
enforcing that timeout while it is connected, but during reconnect the
timeout is not enforced and commands may get stuck for a long period or
even forever.
To fix this long delay due to the default timeout, introduce new
"fast_io_fail_tmo" session parameter. The timeout is measured in seconds
from the controller reconnect and any command beyond that timeout is
rejected. The new parameter value may be passed during 'connect'.
The default value of -1 means no timeout (similar to current behavior).
Signed-off-by: Victor Gladkov <victor.gladkov@kioxia.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There is a spelling mistake in the Kconfig help text. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Generation counter is protected by nvmet_config_sem. Make sure the
callers that call functions that might change it, are calling it
properly.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
remove unused cqs from nvmet_ctrl struct
this will reduce the allocated memory.
Signed-off-by: Amit <amit.engel@dell.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
currently the NVME_QUIRK_SHARED_TAGS quirk for Apple devices is handled
during the assignment of nr_io_queues in nvme_setup_io_queues().
This however means that for these devices nvme_max_io_queues() will
actually not return the supported maximum which is confusing and
unexpected and also means that in nvme_probe() we are allocating
for I/O queues that will never be used.
Fix this by moving the quirk handling into nvme_max_io_queues().
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
in nvme_setup_io_queues() the number of I/O queues is set to either 1 in
case of a quirky Apple device or to the min of nvme_max_io_queues() or
dev->nr_allocated_queues - 1.
This is unnecessarily complicated as dev->nr_allocated_queues is only
assigned once and is nvme_max_io_queues() + 1.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In nvmet_passthru_execute_cmd() which is a high frequency function
it uses bio_alloc() which leads to memory allocation from the fs pool
for each I/O.
For NVMeoF nvmet_req we already have inline_bvec allocated as a part of
request allocation that can be used with preallocated bio when we
already know the size of request before bio allocation with bio_alloc(),
which we already do.
Introduce a bio member for the nvmet_req passthru anon union. In the
fast path, check if we can get away with inline bvec and bio from
nvmet_req with bio_init() call before actually allocating from the
bio_alloc().
This will be useful to avoid any new memory allocation under high
memory pressure situation and get rid of any extra work of
allocation (bio_alloc()) vs initialization (bio_init()) when
transfer len is < NVMET_MAX_INLINE_DATA_LEN that user can configure at
compile time.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The function blk_rq_append_bio() is a genereric API written for all
types driver (having bounce buffers) and different context (where
request is already having a bio i.e. rq->bio != NULL).
It does mainly three things: calculating the segments, bounce queue and
if req->bio == NULL call blk_rq_bio_prep() or handle low level merge()
case.
The NVMe PCIe and fabrics transports currently does not use queue
bounce mechanism. In order to find this for each request processing
in the passthru blk_rq_append_bio() does extra work in the fast path
for each request.
When I ran I/Os with different block sizes on the passthru controller
I found that we can reuse the req->sg_cnt instead of iterating over the
bvecs to find out nr_segs in blk_rq_append_bio(). This calculation in
blk_rq_append_bio() is a duplication of work given that we have the
value in req->sg_cnt. (correct me here if I'm wrong).
With NVMe passthru request based driver we allocate fresh request each
time, so every call to blk_rq_append_bio() rq->bio will be NULL i.e.
we don't really need the second condition in the blk_rq_append_bio()
and the resulting error condition in the caller of blk_rq_append_bio().
So for NVMeOF passthru driver recalculating the segments, bounce check
and ll_back_merge code is not needed such that we can get away with the
minimal version of the blk_rq_append_bio() which removes the error check
in the fast path along with extra variable in nvmet_passthru_map_sg().
This patch updates the nvmet_passthru_map_sg() such that it does only
appending the bio to the request in the context of the NVMeOF Passthru
driver. Following are perf numbers :-
With current implementation (blk_rq_append_bio()) :-
----------------------------------------------------
+ 5.80% 0.02% kworker/0:2-mm_ [nvmet] [k] nvmet_passthru_execute_cmd
+ 5.44% 0.01% kworker/0:2-mm_ [nvmet] [k] nvmet_passthru_execute_cmd
+ 4.88% 0.00% kworker/0:2-mm_ [nvmet] [k] nvmet_passthru_execute_cmd
+ 5.44% 0.01% kworker/0:2-mm_ [nvmet] [k] nvmet_passthru_execute_cmd
+ 4.86% 0.01% kworker/0:2-mm_ [nvmet] [k] nvmet_passthru_execute_cmd
+ 5.17% 0.00% kworker/0:2-eve [nvmet] [k] nvmet_passthru_execute_cmd
With this patch using blk_rq_bio_prep() :-
----------------------------------------------------
+ 3.14% 0.02% kworker/0:2-eve [nvmet] [k] nvmet_passthru_execute_cmd
+ 3.26% 0.01% kworker/0:2-eve [nvmet] [k] nvmet_passthru_execute_cmd
+ 5.37% 0.01% kworker/0:2-mm_ [nvmet] [k] nvmet_passthru_execute_cmd
+ 5.18% 0.02% kworker/0:2-eve [nvmet] [k] nvmet_passthru_execute_cmd
+ 4.84% 0.02% kworker/0:2-mm_ [nvmet] [k] nvmet_passthru_execute_cmd
+ 4.87% 0.01% kworker/0:2-mm_ [nvmet] [k] nvmet_passthru_execute_cmd
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
For passthru commands setting op_flags has no meaning. Remove the code
that sets the op flags in nvmet_passthru_map_sg().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Right now nvme_alloc_request() allocates a request from block layer
based on the value of the qid. When qid set to NVME_QID_ANY it used
blk_mq_alloc_request() else blk_mq_alloc_request_hctx().
The function nvme_alloc_request() is called from different context, The
only place where it uses non NVME_QID_ANY value is for fabrics connect
commands :-
nvme_submit_sync_cmd() NVME_QID_ANY
nvme_features() NVME_QID_ANY
nvme_sec_submit() NVME_QID_ANY
nvmf_reg_read32() NVME_QID_ANY
nvmf_reg_read64() NVME_QID_ANY
nvmf_reg_write32() NVME_QID_ANY
nvmf_connect_admin_queue() NVME_QID_ANY
nvme_submit_user_cmd() NVME_QID_ANY
nvme_alloc_request()
nvme_keep_alive() NVME_QID_ANY
nvme_alloc_request()
nvme_timeout() NVME_QID_ANY
nvme_alloc_request()
nvme_delete_queue() NVME_QID_ANY
nvme_alloc_request()
nvmet_passthru_execute_cmd() NVME_QID_ANY
nvme_alloc_request()
nvmf_connect_io_queue() QID
__nvme_submit_sync_cmd()
nvme_alloc_request()
With passthru nvme_alloc_request() now falls into the I/O fast path such
that blk_mq_alloc_request_hctx() is never gets called and that adds
additional branch check in fast path.
Split the nvme_alloc_request() into nvme_alloc_request() and
nvme_alloc_request_qid().
Replace each call of the nvme_alloc_request() with NVME_QID_ANY param
with a call to newly added nvme_alloc_request() without NVME_QID_ANY.
Replace a call to nvme_alloc_request() with QID param with a call to
newly added nvme_alloc_request() and nvme_alloc_request_qid()
based on the qid value set in the __nvme_submit_sync_cmd().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
NVMeOF controller in the passsthru mode is capable of handling wide set
of I/O commands including vender specific passhtru io comands.
The vendor specific I/O commands are used to read the large drive
logs and can take longer than default NVMe commands, i.e. for
passthru requests the timeout value may differ from the passthru
controller's default timeout values (nvme-core:io_timeout).
Add a configfs attribute so that user can set the io timeout values.
In case if this configfs value is not set nvme_alloc_request() will set
the NVME_IO_TIMEOUT value when request queuedata is NULL.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
NVMeOF controller in the passsthru mode is capable of handling wide set
of admin commands including vender specific passhtru admin comands.
The vendor specific admin commands are used to read the large drive
logs and can take longer than default NVMe commands, i.e. for
passthru requests the timeout value may differ from the passthru
controller's default timeout values (nvme-core:admin_timeout).
Add a configfs attribute so that user can set the admin timeout values.
In case if this configfs value is not set nvme_alloc_request() will set
the ADMIN_TIMEOUT value when request queuedata is NULL.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This is purely a clenaup patch, add prefix NVME to the ADMIN_TIMEOUT to
make consistent with NVME_IO_TIMEOUT.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The function nvme_alloc_request() is called from different context
(I/O and Admin queue) where callers do not consider the I/O timeout when
called from I/O queue context.
Update nvme_alloc_request() to set the default I/O and Admin timeout
value based on whether the queuedata is set or not.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Use the request's '->mq_hctx->queue_num' directly to simplify the
nvme_req_qid() function.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add sysfs attribute to specify parameters for dropping a command. The
attribute takes a string of:
<opcode>:<starting a what instance>:<number of times>
Opcode is formatted as lower 8 bits are opcode. If a fabrics opcode, a
bit above bits 7:0 will be set.
Once set, each sqe is looked at. If the opcode matches the running
instance count is updated. If the instance count is in the range of where
to drop (based on starting and # of times), then drop the command by not
passing it to the target layer.
Signed-off-by: James Smart <james.smart@broadcom.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl+69egeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGTSYH/ifRBlaxy5UiHFc0
2zdR7pkjWrYfDTTT3sazIAhdlzzcfnkUqgFxOP45F4ZIqeTzunH3sUY+5UlT9IX7
liUgnLxQ/1R9Gx8kPGQfu+tLCey78xVFydGsqJoW9sPRw2R+apMdGGa/lOrk+OXz
DXIN+dDnGFqwCCNJpK+rxQQhFf++IPpSI8z6Y23moOFhsDZrEziHuVFy2FGyRM6z
prZ/us/tcobE8ptCk1RmOxLoJ1DR6UxpA2vLimTE+JD8siOsSWPbjE0KudnWCnd5
BLqIjrsPJbSxyuzzK3v9dnO5wMv7tMDuMIuYM/MQTXDttNwtsqt/aP6gdnUCym7N
5eHEj5g=
=MuO1
-----END PGP SIGNATURE-----
Merge tag 'v5.10-rc5' into rdma.git for-next
For dependencies in following patches
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use the ib_dma_* helpers to skip the DMA translation instead. This
removes the last user if dma_virt_ops and keeps the weird layering
violation inside the RDMA core instead of burderning the DMA mapping
subsystems with it. This also means the software RDMA drivers now don't
have to mess with DMA parameters that are not relevant to them at all, and
that in the future we can use PCI P2P transfers even for software RDMA, as
there is no first fake layer of DMA mapping that the P2P DMA support.
Link: https://lore.kernel.org/r/20201106181941.1878556-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use the block layer helper to update both the disk and block device
sizes. Contrary to the name no notification is sent in this case,
as a size 0 is special cased.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The update_bdev argument is always set to true, so remove it. Also
rename the function to the slighly less verbose set_capacity_and_notify,
as propagating the disk size to the block device isn't really
revalidation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no good reason to call revalidate_disk_size separately.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
xa_destroy() frees only internal data. The caller is responsible for
freeing the exteranl objects referenced by an xarray.
Fixes: 1cf7a12e09 ("nvme: use an xarray to lookup the Commands Supported and Effects log")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove the struct used for tracking known command effects logs in a
list. This is now saved in an xarray that doesn't use these elements.
Instead, store the log directly instead of the wrapper struct.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If Doorbell Buffer Config command fails even 'dev->dbbuf_dbs != NULL'
which means OACS indicates that NVME_CTRL_OACS_DBBUF_SUPP is set,
nvme_dbbuf_update_and_check_event() will check event even it's not been
successfully set.
This patch fixes mismatch among dbbuf for sq/cqs in case that dbbuf
command fails.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
->dma_device is a private implementation detail of the RDMA core. Use the
ibdev_to_node helper to get the NUMA node for a ib_device instead of
poking into ->dma_device.
Link: https://lore.kernel.org/r/20201106181941.1878556-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The offending commit breaks BLKROSET ioctl because a device
revalidation will blindly override BLKROSET setting. Hence,
we remove the disk rw setting in case NVME_NS_ATTR_RO is cleared
from by the controller.
Fixes: 1293477f4f ("nvme: set gendisk read only based on nsattr")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The request may be executed asynchronously, and rq->state may be
changed to IDLE. To avoid repeated request completion, only
MQ_RQ_COMPLETE of rq->state is checked in nvme_tcp_complete_timed_out.
It is not safe, so need adding check IDLE for rq->state.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The request may be executed asynchronously, and rq->state may be
changed to IDLE. To avoid repeated request completion, only
MQ_RQ_COMPLETE of rq->state is checked in nvme_rdma_complete_timed_out.
It is not safe, so need adding check IDLE for rq->state.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Now use teardown_lock to serialize for time out and tear down. This may
cause abnormal: first cancel all request in tear down, then time out may
complete the request again, but the request may already be freed or
restarted.
To avoid race between time out and tear down, in tear down process,
first we quiesce the queue, and then delete the timer and cancel
the time out work for the queue. At the same time we need to delete
teardown_lock.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Now use teardown_lock to serialize for time out and tear down. This may
cause abnormal: first cancel all request in tear down, then time out may
complete the request again, but the request may already be freed or
restarted.
To avoid race between time out and tear down, in tear down process,
first we quiesce the queue, and then delete the timer and cancel
the time out work for the queue. At the same time we need to delete
teardown_lock.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Introduce sync io queues for some scenarios which just only need sync
io queues not sync all queues.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Multiple CPUs may be mapped to the same hctx, allowing mulitple
submission contexts to attempt commit_rqs(). We need to verify we're
not writing the same doorbell value multiple times since that's a spec
violation.
Revert commit 54b2fcee1d.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1878596
Reported-by: "B.L. Jones" <brandon.gustav@googlemail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
There are two flows for handling RDMA_CM_EVENT_ROUTE_RESOLVED, either the
handler triggers a completion and another thread does rdma_connect() or
the handler directly calls rdma_connect().
In all cases rdma_connect() needs to hold the handler_mutex, but when
handler's are invoked this is already held by the core code. This causes
ULPs using the 2nd method to deadlock.
Provide a rdma_connect_locked() and have all ULPs call it from their
handlers.
Link: https://lore.kernel.org/r/0-v2-53c22d5c1405+33-rdma_connect_locking_jgg@nvidia.com
Reported-and-tested-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Fixes: 2a7cec5381 ("RDMA/cma: Fix locking for the RDMA_CM_CONNECT state")
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
__nvme_fc_terminate_io() is now called by only 1 place, in reset_work.
Consoldate and move the functionality of terminate_io into reset_work.
In reset_work, rather than calling the create_association directly,
schedule the connect work element to do its thing. After scheduling,
flush the connect work element to continue with semantic of not
returning until connect has been attempted at least once.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme_fc_error_recovery() special cases handling when in CONNECTING state
and calls __nvme_fc_terminate_io(). __nvme_fc_terminate_io() itself
special cases CONNECTING state and calls the routine to abort outstanding
ios.
Simplify the sequence by putting the call to abort outstanding I/Os
directly in nvme_fc_error_recovery.
Move the location of __nvme_fc_abort_outstanding_ios(), and
nvme_fc_terminate_exchange() which is called by it, to avoid adding
function prototypes for nvme_fc_error_recovery().
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
err_work was created to handle errors (mainly I/O timeouts) while in
CONNECTING state. The flag for err_work_active is also unneeded.
Remove err_work_active and err_work. The actions to abort I/Os are moved
inline to nvme_error_recovery().
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Whenever there are errors during CONNECTING, the driver recovers by
aborting all outstanding ios and counts on the io completion to fail them
and thus the connection/association they are on. However, the connection
failure depends on a failure state from the core routines. Not all
commands that are issued by the core routine are guaranteed to cause a
failure of the core routine. They may be treated as a failure status and
the status is then ignored.
As such, whenever the transport enters error_recovery while CONNECTING,
it will set a new flag indicating an association failed. The
create_association routine which creates and initializes the controller,
will monitor the state of the flag as well as the core routine error
status and ensure the association fails if there was an error.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Receiving a zero length message leads to the following warnings because
the CQE is processed twice:
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 0 at lib/refcount.c:28
RIP: 0010:refcount_warn_saturate+0xd9/0xe0
Call Trace:
<IRQ>
nvme_rdma_recv_done+0xf3/0x280 [nvme_rdma]
__ib_process_cq+0x76/0x150 [ib_core]
...
Sanity check the received data length, to avoids this.
Thanks to Chao Leng & Sagi for suggestions.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Revalidating nvme zoned namespaces requires IO commands, and there are
controller states that prevent IO. For example, a sanitize in progress
is required to fail all IO, but we don't want to remove a namespace
we've previously added just because the controller is in such a state.
Suppress the error in this case.
Reported-by: Michael Nguyen <michael.nguyen@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We've had several complaints about a 10s reconnect delay (the default)
when there was an error while there is connectivity to a subsystem.
The max_reconnects and reconnect_delay are set in common code prior to
calling the transport to create the controller.
This change checks if the default reconnect delay is being used, and if
so, it adjusts it to a shorter period (2s) for the nvme-fc transport.
It does so by calculating the controller loss tmo window, changing the
value of the reconnect delay, and then recalculating the maximum number
of reconnect attempts allowed.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
On reconnect, the code currently does not freeze the controller before
possibly updating the number hw queues for the controller.
Add the freeze before updating the number of hw queues. Note: the queues
are already started and remain started through the reconnect.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The loop that backs out of hw io queue creation continues through index
0, which corresponds to the admin queue as well.
Fix the loop so it only proceeds through indexes 1..n which correspond to
I/O queues.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Currently, an I/O timeout unconditionally invokes
nvme_fc_error_recovery() which checks for LIVE or CONNECTING state. If
live, the routine resets the controller which initiates a reconnect -
which is valid. If CONNECTING, err_work is scheduled. Err_work then
calls the terminate_io routine, which also checks for CONNECTING and
noops any further action on outstanding I/O. The result is nothing
happened to the timed out io. As such, if the command was dropped on
the wire, it will never timeout / complete, and the connect process
will hang.
Change the behavior of the io timeout routine to unconditionally abort
the I/O. I/O completion handling will note that an io failed due to an
abort and will terminate the connection / association as needed. If the
abort was unable to happen, continue with a call to
nvme_fc_error_recovery(). To ensure something different happens in
nvme_fc_error_recovery() rework it so at it will abort all I/Os on the
association to force a failure.
As I/O aborts now may occur outside of delete_association, counting for
completion must be wary and only count those aborted during
delete_association when TERMIO is set on the controller.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
By default, we set the passthru request allocation flag such that it
returns the error in the following code path and we fail the I/O when
BLK_MQ_REQ_NOWAIT is used for request allocation :-
nvme_alloc_request()
blk_mq_alloc_request()
blk_mq_queue_enter()
if (flag & BLK_MQ_REQ_NOWAIT)
return -EBUSY; <-- return if busy.
On some controllers using BLK_MQ_REQ_NOWAIT ends up in I/O error where
the controller is perfectly healthy and not in a degraded state.
Block layer request allocation does allow us to wait instead of
immediately returning the error when we BLK_MQ_REQ_NOWAIT flag is not
used. This has shown to fix the I/O error problem reported under
heavy random write workload.
Remove the BLK_MQ_REQ_NOWAIT parameter for passthru request allocation
which resolves this issue.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Clean up some confusing elements of nvmet_passthru_map_sg() by returning
early if the request is greater than the maximum bio size. This allows
us to drop the sg_cnt variable.
This should not result in any functional change but makes the code
clearer and more understandable. The original code allocated a truncated
bio then would return EINVAL when bio_add_pc_page() filled that bio. The
new code just returns EINVAL early if this would happen.
Fixes: c1fef73f79 ("nvmet: add passthru code to process commands")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Suggested-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvmet_passthru_map_sg() only supports mapping a single BIO, not a chain
so the effective maximum transfer should also be limitted by
BIO_MAX_PAGES (presently this works out to 1MB).
For PCI passthru devices the max_sectors would typically be more
limitting than BIO_MAX_PAGES, but this may not be true for all passthru
devices.
Fixes: c1fef73f79 ("nvmet: add passthru code to process commands")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When connecting a controller with a zero kato value using the following
command line
nvme connect -t tcp -n NQN -a ADDR -s PORT --keep-alive-tmo=0
the warning below can be reproduced:
WARNING: CPU: 1 PID: 241 at kernel/workqueue.c:1627 __queue_delayed_work+0x6d/0x90
with trace:
mod_delayed_work_on+0x59/0x90
nvmet_update_cc+0xee/0x100 [nvmet]
nvmet_execute_prop_set+0x72/0x80 [nvmet]
nvmet_tcp_try_recv_pdu+0x2f7/0x770 [nvmet_tcp]
nvmet_tcp_io_work+0x63f/0xb2d [nvmet_tcp]
...
This is caused by queuing up an uninitialized work. Althrough the
keep-alive timer is disabled during allocating the controller (fixed in
0d3b6a8d21), ka_work still has a chance to run (called by
nvmet_start_ctrl).
Fixes: 0d3b6a8d21 ("nvmet: Disable keep-alive timer when kato is cleared to 0h")
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Like commit 5611ec2b98 ("nvme-pci: prevent SK hynix PC400 from using
Write Zeroes command"), Sandisk Skyhawk has the same issue:
[ 6305.633887] blk_update_request: operation not supported error, dev nvme0n1, sector 340812032 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
So also disable Write Zeroes command on Sandisk Skyhawk.
BugLink: https://bugs.launchpad.net/bugs/1899503
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The request's rq_disk isn't set for passthrough IO commands, so tracing
uses qid 0 for these which incorrectly decodes as an admin command. Use
the request_queue's queuedata instead since that value is always set for
the IO queues, and never set for the admin queue.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
A crash happened due to injecting error test.
When a CQE has incorrect command id due do an error injection, the host
may find a request which is already freed. Dereferencing req->mr->rkey
causes a crash in nvme_rdma_process_nvme_rsp because the mr is already
freed.
Add a check for the mr to fix it.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
A crash can happened when a connect is rejected. The host establishes
the connection after received ConnectReply, and then continues to send
the fabrics Connect command. If the controller does not receive the
ReadyToUse capsule, host may receive a ConnectReject reply.
Call nvme_rdma_destroy_queue_ib after the host received the
RDMA_CM_EVENT_REJECTED event. Then when the fabrics Connect command
times out, nvme_rdma_timeout calls nvme_rdma_complete_rq to fail the
request. A crash happenes due to use after free in
nvme_rdma_complete_rq.
nvme_rdma_destroy_queue_ib is redundant when handling the
RDMA_CM_EVENT_REJECTED event as nvme_rdma_destroy_queue_ib is already
called in connection failure handler.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Translate zoned resource errors to the appropriate blk_status_t.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=xE9E
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Here are the driver updates for 5.10.
A few SCSI updates in here too, in coordination with Martin as they
depend on core block changes for the shared tag bitmap.
This contains:
- NVMe pull requests via Christoph:
- fix keep alive timer modification (Amit Engel)
- order the PCI ID list more sensibly (Andy Shevchenko)
- cleanup the open by controller helper (Chaitanya Kulkarni)
- use an xarray for the CSE log lookup (Chaitanya Kulkarni)
- support ZNS in nvmet passthrough mode (Chaitanya Kulkarni)
- fix nvme_ns_report_zones (Christoph Hellwig)
- add a sanity check to nvmet-fc (James Smart)
- fix interrupt allocation when too many polled queues are
specified (Jeffle Xu)
- small nvmet-tcp optimization (Mark Wunderlich)
- fix a controller refcount leak on init failure (Chaitanya
Kulkarni)
- misc cleanups (Chaitanya Kulkarni)
- major refactoring of the scanning code (Christoph Hellwig)
- MD updates via Song:
- Bug fixes in bitmap code, from Zhao Heming
- Fix a work queue check, from Guoqing Jiang
- Fix raid5 oops with reshape, from Song Liu
- Clean up unused code, from Jason Yan
- Discard improvements, from Xiao Ni
- raid5/6 page offset support, from Yufen Yu
- Shared tag bitmap for SCSI/hisi_sas/null_blk (John, Kashyap,
Hannes)
- null_blk open/active zone limit support (Niklas)
- Set of bcache updates (Coly, Dongsheng, Qinglang)"
* tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (78 commits)
md/raid5: fix oops during stripe resizing
md/bitmap: fix memory leak of temporary bitmap
md: fix the checking of wrong work queue
md/bitmap: md_bitmap_get_counter returns wrong blocks
md/bitmap: md_bitmap_read_sb uses wrong bitmap blocks
md/raid0: remove unused function is_io_in_chunk_boundary()
nvme-core: remove extra condition for vwc
nvme-core: remove extra variable
nvme: remove nvme_identify_ns_list
nvme: refactor nvme_validate_ns
nvme: move nvme_validate_ns
nvme: query namespace identifiers before adding the namespace
nvme: revalidate zone bitmaps in nvme_update_ns_info
nvme: remove nvme_update_formats
nvme: update the known admin effects
nvme: set the queue limits in nvme_update_ns_info
nvme: remove the 0 lba_shift check in nvme_update_ns_info
nvme: clean up the check for too large logic block sizes
nvme: freeze the queue over ->lba_shift updates
nvme: factor out a nvme_configure_metadata helper
...
-----BEGIN PGP SIGNATURE-----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=LzyE
-----END PGP SIGNATURE-----
Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Series of merge handling cleanups (Baolin, Christoph)
- Series of blk-throttle fixes and cleanups (Baolin)
- Series cleaning up BDI, seperating the block device from the
backing_dev_info (Christoph)
- Removal of bdget() as a generic API (Christoph)
- Removal of blkdev_get() as a generic API (Christoph)
- Cleanup of is-partition checks (Christoph)
- Series reworking disk revalidation (Christoph)
- Series cleaning up bio flags (Christoph)
- bio crypt fixes (Eric)
- IO stats inflight tweak (Gabriel)
- blk-mq tags fixes (Hannes)
- Buffer invalidation fixes (Jan)
- Allow soft limits for zone append (Johannes)
- Shared tag set improvements (John, Kashyap)
- Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel)
- DM no-wait support (Mike, Konstantin)
- Request allocation improvements (Ming)
- Allow md/dm/bcache to use IO stat helpers (Song)
- Series improving blk-iocost (Tejun)
- Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang,
Xianting, Yang, Yufen, yangerkun)
* tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits)
block: fix uapi blkzoned.h comments
blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue
blk-mq: get rid of the dead flush handle code path
block: get rid of unnecessary local variable
block: fix comment and add lockdep assert
blk-mq: use helper function to test hw stopped
block: use helper function to test queue register
block: remove redundant mq check
block: invoke blk_mq_exit_sched no matter whether have .exit_sched
percpu_ref: don't refer to ref->data if it isn't allocated
block: ratelimit handle_bad_sector() message
blk-throttle: Re-use the throtl_set_slice_end()
blk-throttle: Open code __throtl_de/enqueue_tg()
blk-throttle: Move service tree validation out of the throtl_rb_first()
blk-throttle: Move the list operation after list validation
blk-throttle: Fix IO hang for a corner case
blk-throttle: Avoid tracking latency if low limit is invalid
blk-throttle: Avoid getting the current time if tg->last_finish_time is 0
blk-throttle: Remove a meaningless parameter for throtl_downgrade_state()
block: Remove redundant 'return' statement
...
-----BEGIN PGP SIGNATURE-----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=THH6
-----END PGP SIGNATURE-----
Merge tag 'block5.9-2020-10-08' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes that should go into this release:
- NVMe controller error path reference fix (Chaitanya)
- Fix regression with IBM partitions on non-dasd devices (Christoph)
- Fix a missing clear in the compat CDROM packet structure (Peilin)"
* tag 'block5.9-2020-10-08' of git://git.kernel.dk/linux-block:
partitions/ibm: fix non-DASD devices
nvme-core: put ctrl ref when module ref get fail
block/scsi-ioctl: Fix kernel-infoleak in scsi_put_cdrom_generic_arg()
In nvme_set_queue_limits() we initialize vwc to false and later add
a condition to set vwc true. The value of the vwc can be declare
initialized which makes all the blk_queue_XXX() calls uniform.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In nvme_validate_ns() the exra variable ctrl is used only twice.
Using ns->ctrl directly still maintains the redability and original
length of the lines in the code. Get rid of the extra variable ctrl &
use ns->ctrl directly.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
