To remove one more use of the audit libs and address a problem reported
with a recent change where a function isn't available when using the
audit libs method, that should really go away, this being one step in
that direction.
The script used to generate the 64-bit syscall table was already
parametrized to generate for both 64-bit and 32-bit, so just use it and
wire the generated table to the syscalltbl.c routines.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Jiri Slaby <jirislaby@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/6fe63fa3-6c63-4b75-ac09-884d26f6fb95@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If sched_in event for current task is not recorded, sched_in timestamp
will be set to end_time of time window interest, causing an error in
timestamp show. In this case, we choose to ignore this event.
Test scenario:
perf[1229608] does not record the first sched_in event, run time and sch delay are both 0
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
2090450.763231 [0000] perf[1229608] 0.000 0.000 0.000
2090450.763235 [0000] migration/0[15] 0.000 0.001 0.003
2090450.763263 [0001] perf[1229608] 0.000 0.000 0.000
2090450.763268 [0001] migration/1[21] 0.000 0.001 0.004
2090450.763302 [0002] perf[1229608] 0.000 0.000 0.000
2090450.763309 [0002] migration/2[27] 0.000 0.001 0.007
2090450.763338 [0003] perf[1229608] 0.000 0.000 0.000
2090450.763343 [0003] migration/3[33] 0.000 0.001 0.004
Before:
arbitrarily specify a time window of interest, timestamp will be set to an incorrect value
# perf sched timehist --time 100,200
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
200.000000 [0000] perf[1229608] 0.000 0.000 0.000
200.000000 [0001] perf[1229608] 0.000 0.000 0.000
200.000000 [0002] perf[1229608] 0.000 0.000 0.000
200.000000 [0003] perf[1229608] 0.000 0.000 0.000
200.000000 [0004] perf[1229608] 0.000 0.000 0.000
200.000000 [0005] perf[1229608] 0.000 0.000 0.000
200.000000 [0006] perf[1229608] 0.000 0.000 0.000
200.000000 [0007] perf[1229608] 0.000 0.000 0.000
After:
# perf sched timehist --time 100,200
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
Fixes: 853b740711 ("perf sched timehist: Add option to specify time window of interest")
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819024720.2405244-1-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The spinlock and rwlock use a single-element per-cpu array to track
current locks due to performance reason. But this means the key is
always available and it cannot simply account lock stats in the array
because some of them are invalid.
In fact, the contention_end() program in the BPF invalidates the entry
by setting the 'lock' value to 0 instead of deleting the entry for the
hashmap. So it should skip entries with the lock value of 0 in the
account_end_timestamp().
Otherwise, it'd have spurious high contention on an idle machine:
$ sudo perf lock con -ab -Y spinlock sleep 3
contended total wait max wait avg wait type caller
8 4.72 s 1.84 s 590.46 ms spinlock rcu_core+0xc7
8 1.87 s 1.87 s 233.48 ms spinlock process_one_work+0x1b5
2 1.87 s 1.87 s 933.92 ms spinlock worker_thread+0x1a2
3 1.81 s 1.81 s 603.93 ms spinlock tmigr_update_events+0x13c
2 1.72 s 1.72 s 861.98 ms spinlock tick_do_update_jiffies64+0x25
6 42.48 us 13.02 us 7.08 us spinlock futex_q_lock+0x2a
1 13.03 us 13.03 us 13.03 us spinlock futex_wake+0xce
1 11.61 us 11.61 us 11.61 us spinlock rcu_core+0xc7
I don't believe it has contention on a spinlock longer than 1 second.
After this change, it only reports some small contentions.
$ sudo perf lock con -ab -Y spinlock sleep 3
contended total wait max wait avg wait type caller
4 133.51 us 43.29 us 33.38 us spinlock tick_do_update_jiffies64+0x25
4 69.06 us 31.82 us 17.27 us spinlock process_one_work+0x1b5
2 50.66 us 25.77 us 25.33 us spinlock rcu_core+0xc7
1 28.45 us 28.45 us 28.45 us spinlock rcu_core+0xc7
1 24.77 us 24.77 us 24.77 us spinlock tmigr_update_events+0x13c
1 23.34 us 23.34 us 23.34 us spinlock raw_spin_rq_lock_nested+0x15
Fixes: b5711042a1 ("perf lock contention: Use per-cpu array map for spinlocks")
Reported-by: Xi Wang <xii@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: bpf@vger.kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240828052953.1445862-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When it updates the lock stat for the first time, it needs to create an
element in the BPF hash map.
But if there's a concurrent thread waiting for the same lock (like for
rwsem or rwlock), it might race with the thread and possibly fail to
update with -EEXIST.
In that case, it can lookup the map again and put the data there instead
of failing.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20240830065150.1758962-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The LCB_F_SPIN bit is used for spinlock, rwlock and optimistic spinning
in mutex. In get_tstamp_elem() it needs to check spinlock and rwlock
only. As mutex sets the LCB_F_MUTEX, it can check those two bits and
reduce the number of operations.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20240830065150.1758962-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It has some duplicate codes to do the same job. Let's add a label and
goto there to handle errors in a single place.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20240830065150.1758962-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Additional pipe tests where piped files are written to disk. This
means that spotting a file name of "-" isn't a sufficient "is pipe?"
test.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240829150154.37929-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No longer used by `perf inject` the repipe_fd is always -1 and repipe
is always false. Remove the options and associated code knowing the
constant values of the removed variables.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240829150154.37929-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously inject->is_pipe was set if the input or output were a
pipe. Determining the input was a pipe had to be done prior to
starting the session and opening the file. This was done by comparing
the input file name with '-' but it fails if the pipe file is written
to disk.
Opening a pipe file from disk will correctly set perf_data.is_pipe, but
this is too late for 'perf inject' and results in a broken file. A
workaround is 'cat pipe_perf|perf inject -i - ...'.
This change removes inject->is_pipe and changes the dependent
conditions to use the is_pipe flag on the input
(inject->session->data) and output files (inject->output). This
ensures the is_pipe condition reflects things like the header being
read.
The change removes the use of perf file header repiping, that is
writing the file header out while reading it in. The case of input
pipe and output file cannot repipe as the attributes for the file are
unknown. To resolve this, write the file header when writing to disk
and as the attributes may be unknown, write them after the data.
Update sessions repipe variable to be trace_event_repipe as those are
the only events now impacted by it. Update __perf_session__new as the
repipe_fd no longer needs passing. Fully removing repipe from session
header reading will be done in a later change.
Committer testing:
root@number:~# perf record -e syscalls:sys_enter_*sleep/max-stack=4/ -o - sleep 0.01 | perf report -i -
# To display the perf.data header info, please use --header/--header-only options.
#
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.050 MB - ]
#
# Total Lost Samples: 0
#
# Samples: 1 of event 'syscalls:sys_enter_clock_nanosleep'
# Event count (approx.): 1
#
# Overhead Command Shared Object Symbol
# ........ ....... ............. ...............................
#
100.00% sleep libc.so.6 [.] clock_nanosleep@GLIBC_2.2.5
|
---__libc_start_main@@GLIBC_2.34
__libc_start_call_main
0x562fc2560a9f
clock_nanosleep@GLIBC_2.2.5
#
# (Tip: Create an archive with symtabs to analyse on other machine: perf archive)
#
root@number:~# perf record -e syscalls:sys_enter_*sleep/max-stack=4/ -o - sleep 0.01 > pipe.data
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.050 MB - ]
root@number:~# perf report --stdio -i pipe.data
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 1 of event 'syscalls:sys_enter_clock_nanosleep'
# Event count (approx.): 1
#
# Overhead Command Shared Object Symbol
# ........ ....... ............. ...............................
#
100.00% sleep libc.so.6 [.] clock_nanosleep@GLIBC_2.2.5
|
---__libc_start_main@@GLIBC_2.34
__libc_start_call_main
0x55f775975a9f
clock_nanosleep@GLIBC_2.2.5
#
# (Tip: To set sampling period of individual events use perf record -e cpu/cpu-cycles,period=100001/,cpu/branches,period=10001/ ...)
#
root@number:~#
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240829150154.37929-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With a file, to write data an offset needs to be known. Typically data
follows the event attributes in a file.
However, if processing a pipe the number of event attributes may not be
known.
It is convenient in that case to write the attributes after the data.
Expand perf_session__do_write_header() to allow this when the data
offset and size are known.
This approach may be useful for more than just taking a pipe file to
write into a data file, `perf inject --itrace` will reserve and
additional 8kb for attributes, which would be unnecessary if the
attributes were written after the data.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240829150154.37929-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Buggy perf.data files can have the attributes and data
overlapping.
For example, when processing pipe data the attributes aren't known and
so file offset header calculations can consider them not present.
Later this can cause the attributes to overwrite the data. This can be
seen in:
$ perf record -o - true > a.data
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.059 MB - ]
$ perf inject -i a.data -o b.data
$ perf report --stats -i b.data
0x68 [0]: failed to process type: 510379 [Invalid argument]
Error:
failed to process sample
$
This change makes reading the corrupt file fail:
$ perf report --stats -i b.data
Perf file header corrupt: Attributes and data overlap
incompatible file format (rerun with -v to learn more)
$
Which is more informative.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240829150154.37929-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some of the values are a little strange so add documentation to
resolve ambiguity.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240829150154.37929-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_session is a central data structure to the tool so let's comment
it. The auxtrace callbacks are never modified in session so constify.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240829150154.37929-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we have overlapping trace IDs it's also useful to know what the
queue number is to be able to distinguish the source of the trace so
print it inline. Hide it behind the -v option because it might not be
obvious to users what the queue number is.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240722101202.26915-8-james.clark@linaro.org
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
v0.1 HW_ID packets have a new field that describes which sink each CPU
writes to. Use the sink ID to link trace ID maps to each other so that
mappings are shared wherever the sink is shared.
Also update the error message to show that overlapping IDs aren't an
error in per-thread mode, just not supported. In the future we can
use the CPU ID from the AUX records, or watch for changing sink IDs on
HW_ID packets to use the correct decoders.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240722101202.26915-7-james.clark@linaro.org
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This isn't a bug because Perf always masks with
CORESIGHT_TRACE_ID_VAL_MASK before using these values, but to avoid it
looking like it could be, make an effort to not save bad values.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240722101202.26915-6-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that each queue has a unique set of trace ID mappings, use this
list to create the decoders. In unformatted mode just add a single
mapping so only one decoder is made.
Previously each queue would have a decoder created for each traced CPU
on the system but this won't work anymore because CPUs can have
overlapping trace IDs.
This also means that the CORESIGHT_TRACE_ID_UNUSED_FLAG isn't needed
any more. If mappings aren't added then decoders aren't created, rather
than needing a flag to suppress creation.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240722101202.26915-5-james.clark@linaro.org
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The global list won't work for per-sink trace ID allocations, so put a
list in each queue where the IDs will be unique to that queue.
To keep the same behavior as before, for version 0 of the HW_ID packets,
copy all the HW_ID mappings into all queues.
This change doesn't effect the decoders, only trace ID lookups on the
Perf side. The decoders are still created with global mappings which
will be fixed in a later commit.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240722101202.26915-4-james.clark@linaro.org
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make cs_etm__setup_queue() setup a queue even if it's empty, and
pre-allocate queues based on the max CPU that was recorded. In per-CPU
mode aux queues are indexed based on CPU ID even if all CPUs aren't
recorded, sparse queue arrays aren't used.
This will allow HW_IDs to be saved even if no aux data was received in
that queue without having to call cs_etm__setup_queue() from two
different places.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240722101202.26915-3-james.clark@linaro.org
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Both of these passes gather information about how to create the
decoders. AUX records determine formatted/unformatted, and the HW_IDs
determine the traceID/metadata mappings.
Therefore it makes sense to cache the information and wait until both
passes are over until creating the decoders, rather than creating them
at the first HW_ID found.
This will allow a simplification of the creation process where
cs_etm_queue->traceid_list will exclusively used to create the decoders,
rather than the current two methods depending on whether the trace is
formatted or not.
Previously the sample CPU from the AUX record was used to initialize
the decoder CPU, but actually sample CPU == AUX queue index in per-CPU
mode, so saving the sample CPU isn't required.
Similarly formatted/unformatted was used upfront to create the decoders,
but now it's cached until later.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240722101202.26915-2-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian pointed out that the libcap feature test is also used by bpftool, so
we can't remove it just because perf stopped using it, revert the
removal of the feature test.
Since both perf and libcap uses the fast path feature detection
(tools/build/feature/test-all.c), probably the best thing is to keep
libcap-devel when building perf even it not being used there.
This reverts commit 47b3b6435e.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I noticed that the fast path feature detection was failing:
$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
/usr/bin/ld: cannot find -lcap: No such file or directory
collect2: error: ld returned 1 exit status
$
The patch removing the dependency (Fixes tag below) didn't remove the
detection of libcap, and as the fast path feature detection (test-all.c)
had -lcap in its Makefile link list of libraries to link, it was failing
when libcap-devel is not available, fix it by removing those leftover
files.
Fixes: e25ebda78e ("perf cap: Tidy up and improve capability testing")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Zs-gjOGFWtAvIZit@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
$ sudo ./perf test filtering -vv
96: perf record sample filtering (by BPF) tests:
--- start ---
test child forked, pid 2966908
Checking BPF-filter privilege
Basic bpf-filter test
Basic bpf-filter test [Success]
Failing bpf-filter test
Failing bpf-filter test [Success]
Group bpf-filter test
Group bpf-filter test [Success]
Multiple bpf-filter test
Multiple bpf-filter test [Success]
Cgroup bpf-filter test
Cgroup bpf-filter test [Success]
---- end(0) ----
96: perf record sample filtering (by BPF) tests : Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240826221045.1202305-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The new cgroup filter can take either of '==' or '!=' operator and a
pathname for the target cgroup.
$ perf record -a --all-cgroups -e cycles --filter 'cgroup == /abc/def' -- sleep 1
Users should have --all-cgroups option in the command line to enable
cgroup filtering. Technically it doesn't need to have the option as
it can get the current task's cgroup info directly from BPF. But I want
to follow the convention for the other sample info.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240826221045.1202305-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The flex and bison files need to be recompiled when one of these header
filters are changed.
* util/bpf-filter.h
* util/bpf_skel/sample-filter.h
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240826221045.1202305-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The fields in the hist_entry are filled on-demand which means they only
have meaningful values when relevant sort keys are used.
So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in
the hist entry can be garbage. So it shouldn't access it
unconditionally.
I got a segfault, when I wanted to see cgroup profiles.
$ sudo perf record -a --all-cgroups --synth=cgroup true
$ sudo perf report -s cgroup
Program received signal SIGSEGV, Segmentation fault.
0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
48 return RC_CHK_ACCESS(map)->dso;
(gdb) bt
#0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
#1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344
#2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385
#3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true)
at util/hist.c:644
#4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761
#5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779
#6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015
#7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0)
at util/hist.c:1260
#8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0,
machine=0x5555560388e8) at builtin-report.c:334
#9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128,
sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232
#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128,
sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271
#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0,
file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354
#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132
#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245
#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324
#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342
#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60)
at util/session.c:780
#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688,
file_path=0x555556038ff0 "perf.data") at util/session.c:1406
As you can see the entry->ms.map was NULL even if he->ms.map has a
value. This is because 'sym' sort key is not given, so it cannot assume
whether he->ms.sym and entry->ms.sym is the same. I only checked the
'sym' sort key here as it implies 'dso' behavior (so maps are the same).
Fixes: ac01c8c424 ("perf hist: Update hist symbol when updating maps")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Matt Fleming <matt@readmodwrite.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240826221045.1202305-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Shellcheck versions < v0.7.2 can't follow this path so add the helper to
fix the following warning:
In tests/shell/trace_btf_enum.sh line 13:
. "$(dirname $0)"/lib/probe.sh
^--------------------------^ SC1090: Can't follow non-constant source.
Use a directive to specify location.
Fixes: d66763fed3 ("perf test trace_btf_enum: Add regression test for the BTF augmentation of enums in 'perf trace'")
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240809095426.3065163-1-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'pmu' pointer in the auxtrace_record structure is not used after
support multiple AUX events, remove it.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240806204130.720977-3-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use evsel__is_aux_event() to decide if an event is a AUX event, this is
a refactoring to replace comparing the PMU type.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240806204130.720977-2-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Yitian 710 is not a Freescale/NXP design and thus should
be located in a separate T-Head vendor directory.
Reviewed-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Cc: kernel@pengutronix.de
Cc: linux-arm-kernel@lists.infradead.org
Cc: patchwork-lst@pengutronix.de
Link: https://lore.kernel.org/r/20240701175735.485655-1-l.stach@pengutronix.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move some of the JSON/events from others.json to more appropriate JSON
files for power10 platform.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20240827053206.538814-2-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we'll need it later in the current patch series and we can get the
syscall_arg_fmt from syscall_arg->fmt.
Based-on-a-patch-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Zsd8vqCrTh5h69rp@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf trace -p <PID>' work on a syscall that is unaugmented, but doesn't
work on a syscall that's augmented (when it calls perf_event_output() in
BPF).
Let's take open() as an example. open() is augmented in perf trace.
Before:
$ perf trace -e open -p 3792392
? ( ): ... [continued]: open()) = -1 ENOENT (No such file or directory)
? ( ): ... [continued]: open()) = -1 ENOENT (No such file or directory)
We can see there's no output.
After:
$ perf trace -e open -p 3792392
0.000 ( 0.123 ms): a.out/3792392 open(filename: "DINGZHEN", flags: WRONLY) = -1 ENOENT (No such file or directory)
1000.398 ( 0.116 ms): a.out/3792392 open(filename: "DINGZHEN", flags: WRONLY) = -1 ENOENT (No such file or directory)
Reason:
bpf_perf_event_output() will fail when you specify a pid in 'perf trace' (EOPNOTSUPP).
When using 'perf trace -p 114', before perf_event_open(), we'll have PID
= 114, and CPU = -1.
This is bad for bpf-output event, because the ring buffer won't accept
output from BPF's perf_event_output(), making it fail. I'm still trying
to find out why.
If we open bpf-output for every cpu, instead of setting it to -1, like
this:
PID = <PID>, CPU = 0
PID = <PID>, CPU = 1
PID = <PID>, CPU = 2
PID = <PID>, CPU = 3
Everything works.
You can test it with this script (open.c):
#include <unistd.h>
#include <sys/syscall.h>
int main()
{
int i1 = 1, i2 = 2, i3 = 3, i4 = 4;
char s1[] = "DINGZHEN", s2[] = "XUEBAO";
while (1) {
syscall(SYS_open, s1, i1, i2);
sleep(1);
}
return 0;
}
save, compile:
make open
perf trace:
perf trace -e open <path-to-the-executable>
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240815013626.935097-2-howardchu95@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll use it in the next patch, to deciding how to set up the ring
buffer.
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240815013626.935097-2-howardchu95@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new 'perf report' test case that acts as an entry element in 'perf
test list'.
Runs multiple subtests from directory "base_report", which can be
expanded without further editing.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-12-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test basic execution and some options of perf-report subcommand, like
show-nr-samples, header, showcpuutilization, pid and symbol filtering.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-11-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As a form of validation, it is a common practice to check the outputs
of commands whether they contain expected patterns or match a certain
regular expression.
This output checking helper is designed to allow checking stderr output
of perf commands for unexpected messages, while ignoring messages that
are known to be harmless, e.g.:
"Lowering default frequency rate to \d+\."
"\d+ out of order events recorded."
etc.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-10-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf-probe command uses a specific semantics to describe probes.
Test some patterns that are known to be both valid and invalid if
they are handled appropriately.
This test is run as a part of perftool-testsuite_probe test case.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-9-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test if various incompatible options are correctly handled-rejected.
It is run as a part of perftool-testsuite_probe test case.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-8-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test basic behavior of perf-probe subcommand. It is run as a part of
perftool-testsuite_probe test case.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-7-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test perf probe interface. Blacklisted functions should be rejected
when there is an attempt to set a kprobe to them.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-6-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Shellcheck is becoming a standard when building perf to prevent
any unnecessary mistakes. Fix shellcheck warnings in perf testsuite.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-5-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test scripts in base_* directories currently have their own drivers
that run them. Before this patch, the shell test-suite generator causes
them to run twice. Fix that by skipping them in the generator.
A cleaner solution (for future) will be to use the directory structure
idea (introduced by Carsten Haitzler in 7391db6459 ("perf test:
Refactor shell tests allowing subdirs")) to generate test entries with
subtests, like:
$ perf test list
[...]
97: perf probe shell tests
97:1: perf probe basic functionality
97:2: perf probe tests with arguments
97:3: perf probe invalid options handling
[...]
There is already a lot of shell test scripts and many are about to come,
so there is a need for some hierarchy.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-3-vmolnaro@redhat.com
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The getname_flags() routine changed recently and thus the place where we
were getting the pathname is not probeable anymore, albeit still
present, so use the next line for that, before:
root@number:/home/acme/git/perf-tools-next# perf test vfs_getname
91: Add vfs_getname probe to get syscall args filenames : FAILED!
93: Use vfs_getname probe to get syscall args filenames : FAILED!
126: Check open filename arg using perf trace + vfs_getname : FAILED!
root@number:/home/acme/git/perf-tools-next#
Now tests 91 and 126 are passing, some more investigation is needed for
test 93, that continues to fail.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add Multiple bpf-filter test for two or more events with filters.
It uses task-clock and page-faults events with different filter
expressions and check the perf script output
$ sudo ./perf test filtering -vv
96: perf record sample filtering (by BPF) tests:
--- start ---
test child forked, pid 2804025
Checking BPF-filter privilege
Basic bpf-filter test
Basic bpf-filter test [Success]
Failing bpf-filter test
Error: task-clock event does not have PERF_SAMPLE_CPU
Failing bpf-filter test [Success]
Group bpf-filter test
Error: task-clock event does not have PERF_SAMPLE_CPU
Error: task-clock event does not have PERF_SAMPLE_CODE_PAGE_SIZE
Group bpf-filter test [Success]
Multiple bpf-filter test
Multiple bpf-filter test [Success]
---- end(0) ----
96: perf record sample filtering (by BPF) tests : Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240820154504.128923-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
